{"title":"Rack \u0026 Pinion Steering Systems\/Kits","description":null,"products":[{"product_id":"seastar-solutions-sht91523-safe-t-qc-single-tilt-dash-module-complete-tilt-helm-and-tilt-mechanism-kit-with-90-degree-bezel","title":"SeaStar Safe-T QC Single Tilt Dash Steering Module SHT91523, 90 Degree Bezel, 3 Turns Lock-to-Lock","description":"\u003cp\u003eThe SeaStar Safe-T QC Single Tilt Dash Steering Module, part number SHT91523, is a complete tilt-mount steering kit built for boats using a dash-mounted (rather than console-mounted) helm. The kit is part of the Safe-T Quick Connect (QC) system, which uses a simple snap-in cable connection so the helm, cable, and mechanism go together without the fuss of older mechanical steering setups. It delivers a quick-response 3 turns lock-to-lock ratio, giving the helmsman responsive, low-effort steering compared to slower-ratio systems. The tilt mechanism lets the dash-mounted helm angle adjust for driver comfort, and the kit includes a 90 degree bezel for the dash cutout along with all mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003eConstruction includes a standard 3\/4 inch round tapered steering shaft and stainless steel cable output ends for corrosion resistance in the marine environment. The kit is made, designed, and assembled in the United States, and it meets both A.B.Y.C. (American Boat and Yacht Council) standards and N.M.M.A. (National Marine Manufacturers Association) certification requirements, so it is suited to boats that require certified steering components. Everything needed for the tilt dash installation -- helm, tilt mechanism, cable, 90 degree bezel, and hardware -- ships together in one kit under SHT91523.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SHT91523\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Single Tilt Dash Steering Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering System:\u003c\/strong\u003e Safe-T QC (Quick Connect)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Ratio:\u003c\/strong\u003e 3 turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Tilt helm, tilt mechanism, cable, 90 degree bezel, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Meets A.B.Y.C. Standards, meets N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made, designed, and assembled in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Weight:\u003c\/strong\u003e 10.82 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11.5 x 5.75 x 9.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282278137\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SHT91523 kit?\u003c\/strong\u003e The SeaStar Safe-T QC Single Tilt Dash Module SHT91523 includes the tilt helm, the tilt mechanism, the Quick Connect steering cable, a 90 degree bezel, and all mounting hardware needed for a dash-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering module have?\u003c\/strong\u003e SHT91523 has a quick-response ratio of 3 turns lock-to-lock, giving faster, more responsive steering than slower-ratio helm systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SHT91523 use?\u003c\/strong\u003e This module uses a standard 3\/4 inch round tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this module for a dash mount or a console mount?\u003c\/strong\u003e SHT91523 is a dash-mounted tilt steering module, built with a 90 degree bezel and tilt mechanism specifically for dash installations rather than a flat console mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'QC' mean in Safe-T QC?\u003c\/strong\u003e QC stands for Quick Connect, SeaStar's cable connection system that lets the helm, cable, and mechanism snap together during installation instead of requiring traditional mechanical linkage assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cable output ends made of?\u003c\/strong\u003e The cable output ends on the SHT91523 module are stainless steel for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this steering module meet marine industry standards?\u003c\/strong\u003e Yes, the SeaStar Safe-T QC Single Tilt Dash Module meets A.B.Y.C. (American Boat and Yacht Council) standards and N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SHT91523 module manufactured?\u003c\/strong\u003e SHT91523 is made, designed, and assembled in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SHT91523 module weigh?\u003c\/strong\u003e The complete SeaStar Safe-T QC Single Tilt Dash Module weighs 10.82 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this steering module?\u003c\/strong\u003e The SHT91523 module measures 11.5 x 5.75 x 9.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the tilt feature adjustable after installation?\u003c\/strong\u003e Yes, the tilt mechanism included with SHT91523 allows the dash-mounted helm angle to be adjusted for driver comfort after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs SHT91523 a single-cable or dual-cable steering system?\u003c\/strong\u003e SHT91523 is a single tilt dash module, designed for single-cable Safe-T QC steering setups.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989362094299,"sku":"TEL-SHT91523","price":287.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SHT91523__43951.1737870561.500.750.jpg?v=1785188514"},{"product_id":"dometic-seastar-sht91610-dash-tilt-module-kit-bm-rack-back-mount-marine-steering-helm-with-tilt-mechanism-and-cable","title":"SeaStar SHT91610 Dash Tilt Module Kit, BM Rack Back Mount Steering Helm","description":"\u003cp\u003eThe SeaStar SHT91610 Dash Tilt Module Kit is a back-mount rack steering system built for boaters who want a tiltable helm at the dash. The kit bundles a tilt helm and tilt mechanism together, so the steering wheel angle can be adjusted for driver comfort and visibility. Steering is precise and responsive, turning lock-to-lock in just 4 turns, giving quick, predictable response at the helm without excessive arm-over-arm cranking.\u003c\/p\u003e\u003cp\u003eEach kit includes the cable, helm, a 90 degree bezel, and all mounting hardware needed for installation. The back mount design allows the module to be placed quickly into the dash, and the mounting hardware fits industry-standard SeaStar Solutions rack holes, simplifying the swap for boats already set up for rack-and-pinion steering. The unit uses a standard 3\/4 inch round tapered steering shaft and stainless steel cable output ends for corrosion resistance in the marine environment. The module is made of aluminum with a black finish.\u003c\/p\u003e\u003cp\u003eThe SHT91610 kit meets A.B.Y.C. (American Boat and Yacht Council) standards and N.M.M.A. (National Marine Manufacturers Association) certification requirements, and it is made, designed, and assembled in the United States.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SHT91610\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dash Tilt Module, BM Rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Ratio:\u003c\/strong\u003e 4 turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Back mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e 90 degree bezel included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 11.5 x 5.75 x 9.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Meets A.B.Y.C. Standards, meets N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Tilt helm, tilt mechanism, cable, 90 degree bezel, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eMounting hardware fits industry-standard SeaStar Solutions rack holes for back-mount dash installations.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar SHT91610 kit?\u003c\/strong\u003e The SHT91610 kit includes the tilt helm, tilt mechanism, steering cable, a 90 degree bezel, and all mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the mounting hardware fit my existing rack steering setup?\u003c\/strong\u003e Yes, the mounting hardware on the SHT91610 module fits industry-standard SeaStar Solutions rack holes, so it works with existing rack-and-pinion dash cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering module have?\u003c\/strong\u003e The SHT91610 turns 4 times lock-to-lock, giving precise, easy steering response at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the steering shaft on the SHT91610?\u003c\/strong\u003e It uses a standard 3\/4 inch round tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SHT91610 dash tilt module made from?\u003c\/strong\u003e The module is made of aluminum with a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SHT91610 dash tilt module weigh?\u003c\/strong\u003e The SeaStar SHT91610 kit weighs 8.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SHT91610 module?\u003c\/strong\u003e The module measures 11.5 x 5.75 x 9.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SHT91610 a back mount or front mount design?\u003c\/strong\u003e It is a back mount design, allowing quick placement into the dash from behind.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SHT91610 meet marine industry certification standards?\u003c\/strong\u003e Yes, the SHT91610 meets A.B.Y.C. Standards and N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the SHT91610 and the SH91610P?\u003c\/strong\u003e The SHT91610 is the full dash tilt module kit with tilt helm and tilt mechanism, while the SH91610P is the BM Rack Tilt Helm sold on its own for single or dual applications; these are separate SKUs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SHT91610 made?\u003c\/strong\u003e The SeaStar SHT91610 is made, designed, and assembled in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable output ends does this steering kit use?\u003c\/strong\u003e The SHT91610 kit uses stainless steel cable output ends.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989362159835,"sku":"TEL-SHT91610","price":270.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SHT91610__47292.1729700436.500.750.jpg?v=1785188072"},{"product_id":"seastar-sht91630-nfb-dash-tilt-module-for-rack-steering-systems","title":"SeaStar Dash Tilt Module, NFB Rack Steering System - SHT91630","description":"\u003cp\u003eThe SeaStar Dash Tilt Module, NFB Rack (SHT91630) is a dash-mounted tilt module built for SeaStar Solutions NFB (No Feedback) rack and pinion steering systems. It provides adjustable helm tilt at the dash, letting the boat operator set the steering wheel angle for a comfortable driving position at the helm. The module is finished in polished stainless\/chrome-style trim for a clean appearance on the dash panel and is built to integrate with the rest of the NFB rack steering line for reliable, consistent steering feel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SHT91630\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.25 x 9.75 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.39 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282278168\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SHT91630?\u003c\/strong\u003e SHT91630 is a Dash Tilt Module for SeaStar Solutions NFB (No Feedback) rack steering systems, designed to mount at the dash and provide an adjustable helm tilt position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this dash tilt module?\u003c\/strong\u003e The SHT91630 measures 11.25 x 9.75 x 5.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SHT91630 weigh?\u003c\/strong\u003e This dash tilt module weighs 10.39 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the SHT91630 have?\u003c\/strong\u003e It has a polished finish, giving it a clean look on the dash panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SHT91630 compatible with any steering system?\u003c\/strong\u003e The SHT91630 is designed specifically for SeaStar Solutions NFB rack and pinion steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is an NFB rack steering system?\u003c\/strong\u003e NFB stands for No Feedback, a type of rack and pinion steering system used on boats; the SHT91630 dash tilt module is built to work within this system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SHT91630 mount to the dash or the engine?\u003c\/strong\u003e The SHT91630 is a dash-mounted module, placed at the helm dash panel rather than on the engine or drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SHT91630 an OEM SeaStar part?\u003c\/strong\u003e Yes, SHT91630 is a SeaStar Solutions branded part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar SHT91630?\u003c\/strong\u003e The UPC for the SeaStar Dash Tilt Module SHT91630 is 808282278168.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust the steering wheel angle with this module?\u003c\/strong\u003e Yes, the purpose of the SHT91630 dash tilt module is to allow tilt adjustment of the helm at the dash.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989362290907,"sku":"TEL-SHT91630","price":342.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-SHT91630__83698.1780061502.500.750.jpg?v=1785188281"},{"product_id":"seastar-ss14108-8-back-mount-rack-steering-system-single-cable-kit-for-power-assisted-sterndrive-inboard-boats","title":"SeaStar SS14108 Back Mount Rack Steering System, 8-Foot Cable","description":"\u003cp\u003eThe SeaStar SS14108 is a back mount rack steering system built around an 8-foot rotary steering cable with a quick connect adaptor, designed to install from behind the dash. The rack-style steering gear uses a long tubular metal housing rather than a diecast helm case, giving four turns lock-to-lock for precise, comfortable control at the helm. This system is suitable for virtually all power-assisted sterndrive and inboard boats running steering wheels up to 16 inches in diameter, making it a common upgrade or replacement for boats already fitted with power-assisted steering.\u003c\/p\u003e\u003cp\u003eThe quick connect adaptor on the cable end simplifies hookup at the helm during installation, reducing the time needed to swap out a worn or failing cable. The kit ships as a complete cable assembly finished in blue, built from metal construction for durability in a marine environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Back mount rack steering system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Cable Type:\u003c\/strong\u003e Rotary steering cable with quick connect adaptor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power-assisted sterndrive and inboard boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 32 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.62 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092090\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVirtually all power-assisted sterndrive and inboard boats\u003c\/li\u003e\n\u003cli\u003eSteering wheels up to 16 inches in diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS14108?\u003c\/strong\u003e The SS14108 is a SeaStar back mount rack steering system that includes an 8-foot rotary steering cable with a quick connect adaptor, designed to install from behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the SS14108?\u003c\/strong\u003e The cable length is 8 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering system give?\u003c\/strong\u003e Four turns lock-to-lock, which SeaStar designed into the SS14108 rack steering system for precise, comfortable control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel can I use with the SS14108?\u003c\/strong\u003e The SS14108 is suitable for steering wheels up to 16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the SS14108 work with my boat?\u003c\/strong\u003e This SeaStar rack steering system is suitable for virtually all power-assisted sterndrive and inboard boats, provided the steering wheel is 16 inches in diameter or smaller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14108 a rack and pinion or rotary helm system?\u003c\/strong\u003e It is a rack steering system, identifiable by the long tubular metal rack housing behind the dash rather than a rounded diecast helm case; the cable itself is a rotary steering cable with a quick connect adaptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SeaStar SS14108?\u003c\/strong\u003e The SS14108 kit includes the steering cable; it is a back mount rack system intended for installation from behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS14108 made from?\u003c\/strong\u003e The SS14108 steering system is constructed of metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SS14108 cable assembly?\u003c\/strong\u003e The SeaStar SS14108 is finished in blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS14108 weigh?\u003c\/strong\u003e The SeaStar SS14108 weighs 10.62 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SS14108 as packaged?\u003c\/strong\u003e The SS14108 measures 20 x 32 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14108 designed for power-assisted engines?\u003c\/strong\u003e Yes, the SS14108 rack steering system is intended for power-assisted sterndrive and inboard engines.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989365895387,"sku":"TEL-SS14108","price":234.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51dA9zvW8LL.jpg?v=1784477852"},{"product_id":"seastar-solutions-ss14111-back-mount-rack-steering-system-single-cable-11-ft","title":"SeaStar Back Mount Rack Steering Kit, 11 Feet, SS14111","description":"\u003cp\u003eThe SeaStar SS14111 is a back mount rack and pinion steering system built for boats that use a rear-mounted steering rack behind the helm rather than a rounded diecast helm housing. This single-cable kit runs 11 feet and is designed to deliver precise, easy steering feel with four turns lock-to-lock, giving the helmsman consistent, predictable response at the wheel.\u003c\/p\u003e\u003cp\u003eThe kit comes complete with everything needed for the installation: the steering cable, the helm unit, a 90 degree bezel, and the mounting hardware. The helm uses a standard 3\/4 inch round tapered steering shaft, and the cable features stainless steel output ends for corrosion resistance at the connection points. The system is finished in black and constructed with stainless steel components for durability in a marine environment.\u003c\/p\u003e\u003cp\u003eThis is the single back mount rack configuration at an 11-foot cable length, making it suited to boats already set up with back mount rack steering that need a direct steering kit replacement or new installation at this cable length.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Steering Kit, Back Mount Rack, Single, 11 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 11 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Feel:\u003c\/strong\u003e Four turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Steering cable, helm, 90 degree bezel, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Back mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 32 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.51 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092076\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits boats equipped for back mount rack and pinion steering (long metal tubular rack housing behind the dash) using a single 11-foot steering cable configuration.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable length of the SeaStar SS14111 steering kit?\u003c\/strong\u003e The SS14111 is an 11-foot cable, part of the single back mount rack steering kit lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14111 a rotary or rack and pinion steering system?\u003c\/strong\u003e It is a rack and pinion back mount system, identifiable by the long metal tubular rack housing that sits behind the dash rather than a rounded diecast helm case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering kit have?\u003c\/strong\u003e Four turns lock-to-lock, giving precise and easy steering response at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS14111 kit?\u003c\/strong\u003e The kit includes the steering cable, helm, a 90 degree bezel, and the mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SeaStar SS14111 use?\u003c\/strong\u003e A standard 3\/4 inch round tapered steering shaft is used on this helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS14111 steering kit made from?\u003c\/strong\u003e Stainless steel, including the cable output ends, for corrosion resistance in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SeaStar SS14111 steering kit?\u003c\/strong\u003e The kit is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS14111 steering kit weigh?\u003c\/strong\u003e 11.51 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SS14111 steering kit packaging?\u003c\/strong\u003e The item dimensions are 20 x 32 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14111 a single or dual cable system?\u003c\/strong\u003e It is a single cable back mount rack steering kit, not a dual-cable configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14111 include a bezel for installation?\u003c\/strong\u003e Yes, a 90 degree bezel is included with the SS14111 kit along with the mounting hardware.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989365993691,"sku":"TEL-SS14111","price":234.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81u701EOE8L.jpg?v=1784477856"},{"product_id":"seastar-solutions-ss14116-back-mount-rack-steering-system-single-cable-16-ft-3-4-tapered-shaft","title":"SeaStar Solutions SS14116 Back Mount Rack and Pinion Steering Kit, Single Cable, 16 Feet","description":"\u003cp\u003eThe SeaStar Solutions SS14116 is a complete back mount rack and pinion steering kit built for boats that require a single-cable steering run of 16 feet. The kit gives four turns lock-to-lock for precise, predictable helm response, and includes everything needed for the install: the steering cable, a helm, a 90 degree mounting bezel, and the mounting hardware. The helm uses a standard 3\/4 inch round tapered steering shaft, and the cable terminates in stainless steel output ends at the rack end for corrosion resistance and a secure connection to the steering arm. The rack housing and related components are constructed of metal for durability in a marine environment, and the assembly mounts using a U-bolt at the rack end. Overall kit dimensions are 20 x 32 x 6 inches and the complete kit weighs 13.03 pounds as packaged.\u003c\/p\u003e\u003cp\u003eThis back mount rack steering system is designed as a direct, self-contained replacement or new-install solution where a 16-foot single steering cable run is required, pairing a rack and pinion cable assembly with a matching helm rather than requiring the two to be sourced separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar Solutions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14116\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e Back mount rack and pinion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Configuration:\u003c\/strong\u003e Single cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock-to-Lock Turns:\u003c\/strong\u003e Four turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e U-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 32 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Steering cable, helm, 90 degree bezel, and mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e TELSS14116\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal back mount rack and pinion steering kit sized for a 16-foot single cable run; specific make, model, and horsepower fitment details are not specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELSS14116\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar Solutions SS14116 steering kit?\u003c\/strong\u003e The SS14116 kit includes the steering cable, a helm, a 90 degree mounting bezel, and all mounting hardware needed to complete a back mount rack and pinion steering installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable in the SS14116 kit?\u003c\/strong\u003e The cable in this back mount rack steering system runs 16 feet, matching a single-cable rack and pinion configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS14116 helm have?\u003c\/strong\u003e Four turns lock-to-lock, giving precise, easy steering response with this SeaStar Solutions rack and pinion kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SS14116 helm use?\u003c\/strong\u003e A standard 3\/4 inch round tapered steering shaft is used on the SS14116 helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS14116 steering kit made from?\u003c\/strong\u003e The kit is constructed of metal, with stainless steel cable output ends at the rack for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SS14116 rack steering system mounted?\u003c\/strong\u003e It uses a U-bolt mounting type at the rack end of the SS14116 back mount steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS14116 steering kit weigh?\u003c\/strong\u003e The complete SS14116 kit weighs 13.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SS14116 kit as packaged?\u003c\/strong\u003e The SS14116 back mount rack steering kit measures 20 x 32 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the SS14116?\u003c\/strong\u003e Yes, TELSS14116 is listed as the OEM equivalent part number for the SS14116 steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14116 come with a helm, or is the helm sold separately?\u003c\/strong\u003e The helm is included as part of the SS14116 kit, along with the cable, 90 degree bezel, and hardware, so nothing else needs to be purchased separately to complete the steering installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14116 a single-cable or dual-cable steering system?\u003c\/strong\u003e The SS14116 is a single-cable back mount rack and pinion steering system with a 16-foot cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boats is the SS14116 back mount rack steering kit designed for?\u003c\/strong\u003e It is a back mount rack and pinion steering kit sized for installations requiring a 16-foot single steering cable run; specific boat make or engine fitment is not specified for the SS14116.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989366255835,"sku":"TEL-SS14116","price":234.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61K0xg5ugXL.jpg?v=1784477903"},{"product_id":"seastar-solutions-ss14115-back-mount-rack-steering-system-single-15-ft-cable-sterndrive-outboard-boats","title":"SeaStar SS14115 Back Mount Rack Steering System, 15 Feet, Single Cable Kit (OEM TELSS14115)","description":"\u003cp\u003eThe SeaStar SS14115 is a back mount rack and pinion steering system built for sterndrive boats, supplied as a complete 15-foot single-cable kit. The kit includes the steering cable, helm, a 90 degree bezel, and all mounting hardware needed for installation, so the system arrives ready to install as one unit rather than a collection of separate parts. Steering is precise and responsive, requiring four turns lock-to-lock, which gives the helmsman tight, predictable control at the wheel. The helm uses a standard 3\/4 inch round tapered steering shaft, and the cable terminates in stainless steel output ends for corrosion resistance at the connection points. The housing and internal components are constructed of metal and finished in black. This is a back mount rack style system, meaning the steering gear is mounted behind the dash on a long tubular rack housing rather than a rounded diecast helm case, and it is designed for sterndrive boat applications using a U-bolt mounting type. At 26.75 x 20 x 3.25 inches and 12.73 pounds, the SS14115 is sized for installation in boats already fitted with, or being fitted for, back mount rack steering. Buyers can also reference this part by its OEM equivalent number, TELSS14115, when cross-checking compatibility with existing steering hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Steering Kit, Back Mount Rack, Single, 15 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Turns:\u003c\/strong\u003e Four turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e U-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cable, helm, 90 degree bezel, and hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Sterndrive Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 26.75 x 20 x 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.73 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092151\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSterndrive boats using back mount rack and pinion steering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELSS14115\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS14115?\u003c\/strong\u003e The SS14115 is a back mount rack and pinion steering system for sterndrive boats, sold as a complete 15-foot single-cable kit including the cable, helm, a 90 degree bezel, and mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs TELSS14115 the same part as SS14115?\u003c\/strong\u003e Yes, TELSS14115 is the OEM equivalent part number for the SeaStar SS14115 steering kit, so either number refers to the same product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering system have?\u003c\/strong\u003e Four turns lock-to-lock, giving precise, responsive steering control at the helm of the SS14115 system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SS14115 use?\u003c\/strong\u003e A standard 3\/4 inch round tapered steering shaft is used on the SS14115 helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS14115 kit?\u003c\/strong\u003e The kit includes the steering cable, helm, a 90 degree bezel, and all hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is the SS14115 designed for?\u003c\/strong\u003e Sterndrive boats using back mount rack style steering, where the steering gear housing is mounted behind the dash on a long tubular rack rather than a rounded diecast helm case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the SS14115?\u003c\/strong\u003e 15 feet, matching this single-cable back mount rack kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS14115 steering system made of?\u003c\/strong\u003e Metal construction with a black finish, and stainless steel cable output ends at the connection points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SS14115 mounted?\u003c\/strong\u003e It uses a U-bolt mounting type for the back mount rack housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS14115 weigh?\u003c\/strong\u003e 12.73 pounds, which includes the cable, helm, bezel, and hardware in the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SS14115 packaging?\u003c\/strong\u003e 26.75 x 20 x 3.25 inches for the complete SS14115 steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14115 work with power-assisted engines?\u003c\/strong\u003e The SS14115 is a mechanical back mount rack steering system; power-assisted steering applications require a different type of system, so confirm your engine's steering requirements before ordering.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989366288603,"sku":"TEL-SS14115","price":234.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81u701EOE8L_73f56791-a6a1-45f2-825f-c64eebcf7456.jpg?v=1784477903"},{"product_id":"seastar-ss14114-back-mount-rack-steering-system-14-ft-3-4-tapered-shaft-cable-helm-and-90-degree-bezel-kit","title":"SeaStar Solutions SS14114 Back Mount Rack Steering Kit, 14 Feet, Single Cable","description":"\u003cp\u003eThe SeaStar SS14114 is a back mount rack steering kit built for boats using a rack and pinion steering setup, where a long metal tubular rack housing sits behind the dash. This 14-foot kit delivers precise, easy steering with four turns lock-to-lock, giving the helm a responsive feel without excessive wheel spinning. The kit includes the steering cable, helm, a 90 degree bezel, and all mounting hardware needed for installation, so the core components arrive as a complete system rather than separate purchases.\u003c\/p\u003e\u003cp\u003eThe helm is fitted with a standard 3\/4 inch round tapered steering shaft, a common sizing for boat steering wheel attachment, and the cable is finished with stainless steel output ends for corrosion resistance at the connection points. Construction is metal throughout, and the unit is finished in black. This is the 14-foot cable length within the SS141XX back mount rack steering family, so boaters needing a different cable run length should confirm they are selecting the correct foot length for their helm-to-engine distance before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Steering Kit, Back Mount Rack, Single, 14 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e Rack and Pinion, Back Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e Four turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e Standard 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e 90 degree bezel included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Cable, helm, 90 degree bezel, and hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 32 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 453.59 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092359\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for boats with back mount rack and pinion steering systems. Confirm your helm uses a rack housing (long metal tubular housing) behind the dash, not a rounded diecast rotary helm or hydraulic hose\/tubing setup, before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELSS14114\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS14114 steering kit used for?\u003c\/strong\u003e The SeaStar SS14114 is a back mount rack and pinion steering kit for boats, providing the cable, helm, bezel, and hardware needed to steer the boat from the helm station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable in the SS14114 kit?\u003c\/strong\u003e The SS14114 kit uses a 14-foot steering cable, one length option within SeaStar's SS141XX back mount rack steering family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS14114 helm have?\u003c\/strong\u003e Four turns lock-to-lock, giving the SS14114 a responsive but not overly sensitive steering feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the SS14114 kit?\u003c\/strong\u003e The kit includes the steering cable, helm, a 90 degree bezel, and the mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14114 compatible with rotary or hydraulic steering systems?\u003c\/strong\u003e No. The SS14114 is a rack and pinion back mount system, identified by a long metal tubular rack housing behind the dash, and it is not interchangeable with rotary helms (rounded diecast housing) or hydraulic steering (hose or tubing connections).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the steering shaft on the SS14114 helm?\u003c\/strong\u003e The SS14114 helm uses a standard 3\/4 inch round tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cable output ends made of on the SS14114?\u003c\/strong\u003e The cable output ends are stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM equivalent number for the SeaStar SS14114?\u003c\/strong\u003e The SeaStar SS14114 cross-references to OEM number TELSS14114.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS14114 steering kit made from?\u003c\/strong\u003e The SS14114 is constructed of metal and finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS14114 steering kit weigh?\u003c\/strong\u003e The SS14114 back mount rack steering kit weighs 12.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SS14114 kit as packaged?\u003c\/strong\u003e The SS14114 measures 20 x 32 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14114 come with a warranty?\u003c\/strong\u003e The SeaStar SS14114 is backed by a limited warranty from the manufacturer.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989366419675,"sku":"TEL-SS14114","price":234.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81u701EOE8L_894b4852-187a-4d1e-b8d9-107fc4c2ef8c.jpg?v=1784477911"},{"product_id":"seastar-ss14117-back-mount-rack-steering-system-17-ft-single-cable-kit-for-outboard-boats","title":"SeaStar SS14117 Back Mount Rack Steering Kit, Single Cable, 17 Feet","description":"\u003cp\u003eThe SeaStar SS14117 is a back mount rack steering kit built for boats that use a mechanical rack and pinion steering system. The kit uses a single 17-foot steering cable and is designed to deliver precise, easy steering with four turns lock-to-lock. It includes everything needed for a complete steering setup: the cable, helm, a 90 degree bezel, and mounting hardware, so there is no need to source additional parts separately.\u003c\/p\u003e\u003cp\u003eThe helm connects to a standard 3\/4 inch round tapered steering shaft, and the kit mounts using a U-bolt mounting type. The cable output ends are stainless steel for durability and corrosion resistance in a marine environment, and the helm housing is finished in white. The overall construction is metal, and the kit measures 26.75 x 20 x 3.25 inches with a product weight of 13.31 pounds.\u003c\/p\u003e\u003cp\u003eThis is a back mount rack steering system, meaning the rack housing mounts behind the helm rather than through a front-mount configuration. It is suited to boats already set up for mechanical rack and pinion steering that need a replacement or upgrade single-cable kit at the 17-foot cable length.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Steering Kit, Back Mount Rack, Single, 17 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e Four turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e U-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 26.75 x 20 x 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092328\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e TELSS14117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cable, helm, 90 degree bezel, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal-fit back mount rack steering kit and is not limited to a specific make, horsepower, or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTELSS14117\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar SS14117 steering kit?\u003c\/strong\u003e The SS14117 kit includes a single 17-foot steering cable, the helm, a 90 degree bezel, and all mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS14117 helm have?\u003c\/strong\u003e Four turns lock-to-lock, giving precise, easy steering response for the SeaStar back mount rack system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SS14117 use?\u003c\/strong\u003e A standard 3\/4 inch round tapered steering shaft connects to the helm on the SS14117 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs TELSS14117 the same part as SS14117?\u003c\/strong\u003e Yes, TELSS14117 is the OEM equivalent part number used interchangeably with SeaStar's SS14117 back mount rack steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable length on this steering kit?\u003c\/strong\u003e The SS14117 uses a single 17-foot steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS14117 steering kit made from?\u003c\/strong\u003e The kit is constructed of metal, with stainless steel cable output ends for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the SS14117 mount to the boat?\u003c\/strong\u003e It uses a U-bolt mounting type as part of the back mount rack configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SS14117 helm?\u003c\/strong\u003e The helm housing on the SS14117 kit is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the SS14117 kit?\u003c\/strong\u003e The SS14117 measures 26.75 x 20 x 3.25 inches and weighs 13.31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14117 fit a specific boat make or engine horsepower?\u003c\/strong\u003e No, the SS14117 back mount rack steering kit is a universal-fit steering system and is not limited to a specific make, horsepower, or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of steering system is the SS14117 designed for?\u003c\/strong\u003e It is a mechanical rack and pinion steering kit, identifiable by the long metal tubular rack housing mounted behind the dash.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989366485211,"sku":"TEL-SS14117","price":234.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81u701EOE8L_a1563e76-9611-4fb1-97df-c3afbca4038a.jpg?v=1784477921"},{"product_id":"seastar-solutions-ss14113-back-mount-rack-steering-system-single-13-ft-cable-3-4-in-tapered-shaft-4-turns-lock-to-lock","title":"SeaStar SS14113 Back Mount Rack Steering Kit, 13-Foot Cable, Single Station","description":"\u003cp\u003eThe SeaStar SS14113 is a complete back mount rack and pinion steering kit built for single-station boat helms. The kit centers on a long metal tubular rack housing mounted behind the dash, paired with a 13-foot steering cable that delivers precise, easy steering in four turns lock-to-lock. Everything needed for a full installation is included: the steering cable, the helm, a 90 degree bezel, and mounting hardware, so there is no need to source additional pieces separately.\u003c\/p\u003e\u003cp\u003eThe helm uses a standard 3\/4 inch round tapered steering shaft, and the cable terminates in stainless steel output ends for corrosion resistance and a durable connection at the outboard or sterndrive steering arm. The system mounts using a U-bolt mounting type and is constructed of metal for long service life in a marine environment. This is a universal-fit boat steering system rather than an engine-specific part, making it suited to back mount rack steering installations across a range of boats.\u003c\/p\u003e\u003cp\u003eBecause the SS14113 is a back mount rack system, it is identifiable by its long tubular rack housing behind the dash, as opposed to a rounded diecast rotary helm or a hydraulic setup with hose connections. Buyers replacing or upgrading an existing back mount rack steering system can use the SS14113 as a direct, single-station, 13-foot kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14113\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Steering Kit, Back Mount Rack, Single, 13 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e Rack and Pinion (Back Mount)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 13 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock-to-Lock Turns:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered steering shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Steering cable, helm, 90 degree bezel, hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e U-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Stations:\u003c\/strong\u003e Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 32 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092069\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e TELSS14113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats using a back mount rack and pinion steering system with a single helm station.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eTELSS14113\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of steering system is the SeaStar SS14113?\u003c\/strong\u003e The SS14113 is a back mount rack and pinion steering kit, identifiable by its long metal tubular rack housing that mounts behind the dash, rather than a rounded diecast rotary helm or a hydraulic hose-based system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable in the SS14113 kit?\u003c\/strong\u003e This kit includes a 13-foot steering cable, matched to a helm that delivers four turns lock-to-lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the SeaStar SS14113?\u003c\/strong\u003e The kit includes the steering cable, the helm, a 90 degree bezel, and the mounting hardware needed for a single-station installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14113 an OEM part or an equivalent?\u003c\/strong\u003e The SeaStar SS14113 is cross-referenced to OEM number TELSS14113, making it a direct equivalent for that reference number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SS14113 use?\u003c\/strong\u003e It uses a standard 3\/4 inch round tapered steering shaft on the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the SS14113 mount to the boat?\u003c\/strong\u003e The SS14113 back mount rack kit uses a U-bolt mounting type to secure the rack housing behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar SS14113 made from?\u003c\/strong\u003e The steering kit is constructed of metal, with stainless steel used at the cable output ends for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS14113 helm require?\u003c\/strong\u003e Four turns lock-to-lock, giving precise and easy steering control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the SS14113 steering kit?\u003c\/strong\u003e The SeaStar SS14113 measures 20 x 32 x 6 inches and weighs 12.14 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14113 a single-station or dual-station steering kit?\u003c\/strong\u003e This is a single-station steering kit, meaning it is designed for one helm position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the SS14113 fit any boat?\u003c\/strong\u003e The SS14113 is a universal-fit back mount rack steering system suited to boats using this style of rack and pinion steering rather than a rotary or hydraulic setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish do the cable output ends have on the SS14113?\u003c\/strong\u003e The cable output ends on the SeaStar SS14113 are stainless steel.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989366550747,"sku":"TEL-SS14113","price":234.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81u701EOE8L_42ddc33b-eff7-4520-8448-a84e1a82711d.jpg?v=1784477924"},{"product_id":"seastar-solutions-ss14118-back-mount-rack-steering-system-18-ft-single-cable-kit-3-4-tapered-shaft","title":"SeaStar SS14118 Back Mount Rack Steering System, Single, 18 Feet","description":"\u003cp\u003eThe SeaStar SS14118 is a complete back mount rack and pinion steering system built for single-engine outboard boats, supplied as an 18-foot cable kit. Rack and pinion steering is identifiable by the long metal tubular rack housing that sits behind the dash, and this system delivers precise, easy steering feel at four turns lock-to-lock. The kit is packaged as a full replacement solution rather than a cable-only upgrade, including the cable, helm, a 90-degree bezel, and all mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003eThe helm uses a standard 3\/4 inch round tapered steering shaft, and the cable is finished with stainless steel output ends for corrosion resistance at the connection points. The system mounts using a U-bolt mounting type and is constructed of metal with a black finish. This back mount configuration is suited to boats already set up for a back-mounted (transom-mounted) rack steering cable rather than a front mount or hydraulic system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Steering Kit, Back Mount Rack, Single, 18 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e Rack and Pinion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e Four turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e U-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 32 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.62 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092052\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SeaStar SS14118 steering kit?\u003c\/strong\u003e The SS14118 kit includes the steering cable, helm, a 90-degree bezel, and the mounting hardware needed to complete a back mount rack steering installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the SS14118?\u003c\/strong\u003e The cable supplied with the SeaStar SS14118 back mount rack steering system measures 18 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering system have?\u003c\/strong\u003e Four turns lock-to-lock, giving precise, easy steering response on the SeaStar SS14118 rack steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14118 a rack and pinion or rotary steering system?\u003c\/strong\u003e It is a rack and pinion system, identifiable by the long metal tubular rack housing that runs behind the dash, rather than a rotary system with a rounded diecast helm housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SS14118 helm use?\u003c\/strong\u003e The helm uses a standard 3\/4 inch round tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS14118 steering cable output end made of?\u003c\/strong\u003e The cable output ends on the SeaStar SS14118 are stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SeaStar SS14118 mounted?\u003c\/strong\u003e This system uses a U-Bolt mounting type for the back mount rack installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the SS14118 kit?\u003c\/strong\u003e The SeaStar SS14118 measures 20 x 32 x 6 inches and weighs 13.62 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14118 a single or dual cable system?\u003c\/strong\u003e The SS14118 is a single back mount rack steering system, not a dual-cable configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and material is the SS14118 helm and hardware?\u003c\/strong\u003e The SeaStar SS14118 is finished in black and constructed of metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I identify my current steering system before ordering the SS14118?\u003c\/strong\u003e Yes: rack and pinion steering (which the SS14118 uses) has a long metal tubular rack housing behind the dash, rotary steering has a rounded diecast helm case, and hydraulic steering has two or three hoses or tubing sections attached to the helm.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989373923547,"sku":"TEL-SS14118","price":234.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81u701EOE8L_30ed80bc-e87e-4234-847a-8954bc2b3bb7.jpg?v=1784477936"},{"product_id":"seastar-ss14120-back-mount-rack-steering-kit-single-station-20-ft-cable","title":"SeaStar Solutions SS14120 Back Mount Rack and Pinion Steering Kit, Single Engine","description":"\u003cp\u003eThe SeaStar Solutions SS14120 is a back mount rack and pinion steering kit built for single engine boat applications. Rack and pinion steering uses a long metal tubular rack housing mounted behind the dash rather than a rounded diecast helm, giving a mechanical steering feel that many single-engine boat owners prefer for its directness and durability. This kit is supplied as a complete steering package intended to replace or install a rack and pinion mechanical steering setup at the helm station.\u003c\/p\u003e\u003cp\u003eAs a back mount design, the steering assembly is installed from behind the dash panel, which is the standard mounting configuration for this style of SeaStar Solutions rack and pinion system. The kit is intended for single engine boats, distinguishing it from multi-station or twin engine steering configurations. Because mechanical rack and pinion steering relies on a physical rack housing and pinion gear rather than hydraulic hoses or lines, it is a common choice for smaller to mid-size single engine boats where a simple, low-maintenance steering feel is desired.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar Solutions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rack and Pinion Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Back Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Configuration:\u003c\/strong\u003e Single Engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Cables and Kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092274\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar Solutions SS14120?\u003c\/strong\u003e SS14120 is a back mount rack and pinion steering kit from SeaStar Solutions, designed for single engine boat installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14120 a rack and pinion or hydraulic steering system?\u003c\/strong\u003e It is a mechanical rack and pinion steering kit, identifiable by its long metal tubular rack housing mounted behind the dash rather than hydraulic hoses or a rounded diecast helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14120 mount from the front or back of the dash?\u003c\/strong\u003e The SS14120 is a back mount kit, meaning the steering assembly is installed from behind the dash panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this steering kit designed for single or twin engine boats?\u003c\/strong\u003e SS14120 is built for single engine applications, not twin engine or multi-station configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar SS14120 steering kit weigh?\u003c\/strong\u003e The SS14120 back mount rack and pinion steering kit weighs 14.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the SS14120 steering kit?\u003c\/strong\u003e The SS14120 is manufactured by SeaStar Solutions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the SS14120?\u003c\/strong\u003e SS14120 falls under steering cables and kits, specifically as a rack and pinion mechanical steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan rack and pinion steering like the SS14120 be used with power-assisted engines?\u003c\/strong\u003e Mechanical rack and pinion steering systems such as the SS14120 are generally intended for non-power-assisted engine setups; power-assisted engines typically require a hydraulic or power-assist steering system instead.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989374021851,"sku":"TEL-SS14120","price":232.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_176bc929-2718-40b5-8a2a-da404d8c9a55.jpg?v=1785349004"},{"product_id":"seastar-ss14122-back-mount-rack-steering-kit-single-station-22-ft-cable","title":"SeaStar SS14122 Back Mount Rack and Pinion Steering Kit, Single Station","description":"\u003cp\u003eThe SeaStar SS14122 is a back mount rack and pinion steering kit built for single-station boats. Rack and pinion steering systems use a long metal tubular rack housing mounted behind the dash, distinguishing them from rotary steering systems, which use a rounded diecast helm (steering gear case) behind the dash. This SeaStar kit is configured for a single helm station and a back-mount installation, and is listed under the model designation Single 22.\u003c\/p\u003e\u003cp\u003eSeaStar Solutions is a manufacturer of marine mechanical and hydraulic steering systems, and the SS14122 falls within its steering cables and kits lineup. The kit weighs 14.79 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14122\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering System:\u003c\/strong\u003e Rack and Pinion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Back Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStation Configuration:\u003c\/strong\u003e Single Station\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Designation:\u003c\/strong\u003e Single 22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Cables and Kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 131957140706\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.79 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS14122?\u003c\/strong\u003e The SS14122 is a SeaStar back mount rack and pinion steering kit configured for a single helm station, weighing 14.79 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14122 a rack and pinion or a rotary steering system?\u003c\/strong\u003e It is a rack and pinion steering kit. Rack and pinion steering uses a long metal tubular rack housing mounted behind the dash, unlike rotary steering, which uses a rounded diecast helm gear case behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14122 a front mount or back mount steering kit?\u003c\/strong\u003e The SS14122 is a back mount steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this steering kit for single or dual station boats?\u003c\/strong\u003e The SeaStar SS14122 is configured as a single-station steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar SS14122 weigh?\u003c\/strong\u003e The SS14122 steering kit weighs 14.79 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the SS14122 steering kit?\u003c\/strong\u003e The SS14122 is made by SeaStar, a manufacturer of marine mechanical and hydraulic steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the model designation Single 22 mean for the SS14122?\u003c\/strong\u003e Single 22 is the model designation SeaStar uses for this back mount rack and pinion kit, indicating its single-station configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I tell if my boat has rack and pinion steering versus rotary steering?\u003c\/strong\u003e Rack and pinion steering is identified by a long metal tubular rack housing behind the dash, while rotary steering has a rounded diecast helm (steering gear case) behind the dash; the SS14122 is built for rack and pinion systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the SS14122 fall under?\u003c\/strong\u003e The SeaStar SS14122 is categorized as a steering cable and kit product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar SS14122 kit?\u003c\/strong\u003e The UPC for the SeaStar SS14122 back mount rack and pinion steering kit is 131957140706.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989374054619,"sku":"TEL-SS14122","price":300.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_d60464c7-24ba-4524-8d58-70baa79690e6.jpg?v=1785349004"},{"product_id":"seastar-solutions-the-rack-ss14121-back-mount-single-cable-mechanical-rack-steering-system-21-ft-fits-power-assisted-sterndrives-inboards","title":"SeaStar SS14121 The Rack Mechanical Rack Steering Kit, Back Mount, Single Cable, 21 Feet","description":"\u003cp\u003eThe SeaStar SS14121 is a back mount mechanical rack steering kit built for power-assisted sterndrive and inboard boats where No Feedback (NFB) steering is not required. Traditional mechanical steering remains the preferred choice for these applications, and this rack-style system delivers precise, comfortable steering with four turns lock-to-lock. The 21 foot single cable connects a helm and steering shaft that install from behind the dash, keeping installation straightforward without requiring dash modification.\u003c\/p\u003e\u003cp\u003eThe kit includes a cable, helm, 90 degree bezel, and all mounting hardware needed for a complete installation. The helm uses a standard 3\/4 inch round tapered steering shaft, and the cable features stainless steel output ends for durability. The back mount design allows quick placement in the dash, and the mounting hardware fits industry-standard rack hole patterns. The system meets A.B.Y.C. Standards and N.M.M.A. Certification requirements, and it supports steering wheels up to 16 inches in diameter.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS14121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e Mechanical Rack Steering (The Rack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Back Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Configuration:\u003c\/strong\u003e Single Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 21 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Compatibility:\u003c\/strong\u003e Up to 16 inches in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e Standard 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cable, helm, 90 degree bezel, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Meets A.B.Y.C. Standards; meets N.M.M.A. Certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.55 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 131957140744\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Cables and Kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVirtually all power-assisted sterndrive boats with steering wheels up to 16 inches in diameter\u003c\/li\u003e\n\u003cli\u003eBack mount design replaces 1984 to date Teleflex The Rack steering without dash modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS14121 steering kit?\u003c\/strong\u003e The SS14121 is a back mount mechanical rack steering kit from SeaStar, known as The Rack, featuring a 21 foot single cable, helm, 90 degree bezel, and mounting hardware for power-assisted sterndrive and inboard boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS14121 have?\u003c\/strong\u003e It has four turns lock-to-lock, giving precise and comfortable steering response for power-steered boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel can I use with this kit?\u003c\/strong\u003e The SS14121 supports steering wheels up to 16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14121 require dash modification to install?\u003c\/strong\u003e No, the back mount design of the SS14121 installs from behind the dash without requiring dash modification, and its mounting hardware fits industry-standard rack hole patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS14121 kit?\u003c\/strong\u003e The kit includes the steering cable, helm, a 90 degree bezel, and the mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SS14121 use?\u003c\/strong\u003e The SS14121 helm uses a standard 3\/4 inch round tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS14121 suitable for power-assisted engines?\u003c\/strong\u003e Yes, this mechanical rack steering system is designed for power-assisted sterndrive, inboard, and other power-assisted applications where No Feedback (NFB) steering is not required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the cable output ends made of?\u003c\/strong\u003e The SS14121 cable features stainless steel output ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14121 replace older Teleflex steering systems?\u003c\/strong\u003e Yes, its back mount design replaces 1984 to date Teleflex The Rack steering without requiring dash modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS14121 meet marine safety standards?\u003c\/strong\u003e Yes, the SS14121 meets A.B.Y.C. Standards and N.M.M.A. Certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the SS14121?\u003c\/strong\u003e The SS14121 kit uses a single 21 foot steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS14121 steering kit weigh?\u003c\/strong\u003e The SeaStar SS14121 weighs 14.55 pounds.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989374152923,"sku":"TEL-SS14121","price":291.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41j7fJB4eML.jpg?v=1784477964"},{"product_id":"seastar-nfb-rack-steering-kit-ss15111-with-single-11-ft-cable-no-feedback-back-mount-rack-for-single-engine-outboards-sterndrives","title":"SeaStar NFB Rack and Pinion Steering Kit SS15111, Single Cable, 11 Feet, Back Mount","description":"\u003cp\u003eThe SeaStar SS15111 is a NFB (No Feedback) Rack steering kit built for single-station boats with a single nonpower-assisted outboard engine up to V-6, or sterndrives with minimal engine flutter or steering instability. The NFB Rack design delivers a precise feel of four turns from lock to lock and accepts steering wheels up to 16 inches in diameter, giving helmsmen predictable, consistent control without kickback at the wheel.\u003c\/p\u003e\u003cp\u003eThis kit uses SeaStar's Back Mount rack design, which allows the helm and cable to be installed as a single unit from behind the dash, so it drops in as a replacement for TR118, RX4, The Rack, and Back Mount rack steering setups without requiring dash modifications. The steering wheel shaft is a standard 3\/4 inch round tapered shaft, and the cable features stainless steel output ends for corrosion resistance and a secure connection at the engine or outdrive. The kit includes a single 11 foot steering cable matched to the NFB helm.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering System Type:\u003c\/strong\u003e NFB (No Feedback) Rack and Pinion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Stations:\u003c\/strong\u003e Single station\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cables:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 11 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock to Lock:\u003c\/strong\u003e Four turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Steering Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Back Mount (helm and cable install as one unit from behind dash)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.58 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092175\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-station boats with a single nonpower-assisted outboard engine up to V-6\u003c\/li\u003e\n\u003cli\u003eSterndrives with minimal engine flutter or steering instability\u003c\/li\u003e\n\u003cli\u003eNot for power-assisted engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTR118\u003c\/li\u003e\n\u003cli\u003eRX4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS15111 steering kit used for?\u003c\/strong\u003e The SS15111 is a NFB (No Feedback) Rack and Pinion steering kit designed for single-station boats with one nonpower-assisted outboard engine up to V-6, or for sterndrives with minimal engine flutter or steering instability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock to lock does the SS15111 have?\u003c\/strong\u003e Four turns from lock to lock, giving a precise, consistent steering feel typical of SeaStar's NFB Rack systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat steering wheel diameter does this kit support?\u003c\/strong\u003e The SS15111 accepts steering wheels up to 16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel shaft does the SS15111 use?\u003c\/strong\u003e It uses a standard 3\/4 inch round tapered steering wheel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable included with the SS15111?\u003c\/strong\u003e The kit includes a single 11 foot steering cable matched to the NFB helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SS15111 be used with a power-assisted engine?\u003c\/strong\u003e No. NFB steering, including the SS15111, cannot be used with a power-assisted engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS15111 require dash modifications to install?\u003c\/strong\u003e No dash modifications are needed. The Back Mount rack design lets the helm and cable be installed as a single unit from behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat older steering systems does the SS15111 replace?\u003c\/strong\u003e The SS15111 is designed to replace TR118, RX4, The Rack, and Back Mount rack steering setups without dash modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the cable output ends made of on the SS15111?\u003c\/strong\u003e The cable output ends on the SS15111 are stainless steel for corrosion resistance and a secure connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar SS15111 steering kit weigh?\u003c\/strong\u003e The SS15111 steering kit weighs 14.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15111 suitable for a sterndrive boat?\u003c\/strong\u003e Yes, the SS15111 NFB Rack kit is suitable for sterndrives with minimal engine flutter or steering instability, in addition to single nonpower-assisted outboards up to V-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS15111 steering kit?\u003c\/strong\u003e The SS15111 includes the NFB Back Mount rack helm and one 11 foot steering cable with stainless steel output ends.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375103195,"sku":"TEL-SS15111","price":426.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Q2vcyi6wL.jpg?v=1784478058"},{"product_id":"seastar-ss15112-nfb-back-mount-rack-and-pinion-steering-kit-12-ft-cable-single-station-outboard-sterndrive","title":"SeaStar SS15112 NFB Rack and Pinion Steering Kit, 12 Foot, Back Mount, Single Station","description":"\u003cp\u003eThe SeaStar SS15112 is a 12 foot NFB (No FeedBack) rack and pinion steering kit built for single-station boats with a single nonpower-assisted outboard engine up to V-6, or sterndrives, where minimal engine flutter or steering instability is expected. The patented NFB helm delivers the precise feel of four turns from lock to lock, giving the operator consistent, predictable steering response without the kickback felt through the wheel on some rotary systems.\u003c\/p\u003e\u003cp\u003eThis kit uses SeaStar's Back Mount design, which lets the helm and cable be installed as a single unit from behind the dash. That means the wheel-side steering wheel shaft, helm, and cable all install together without requiring any dash modification, cutting installation time compared to older rack steering designs. The helm accepts steering wheels up to 16 inches in diameter and uses a standard 3\/4 inch round tapered steering wheel shaft, a common fitment for aftermarket and factory marine steering wheels. The cable terminates in stainless steel output ends for corrosion resistance at the engine or outboard connection point.\u003c\/p\u003e\u003cp\u003eBecause the Back Mount NFB rack installs as a unit, the SS15112 is intended to replace earlier back mount rack steering systems on applicable single-station boats without additional dash work. It is sold as a complete steering kit rather than individual components, so the helm, cable, and mounting hardware needed for a single-station installation are included together.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Description:\u003c\/strong\u003e Steering Kit, Back Mount Rack NFB, Single, 12 Foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e No FeedBack (NFB) Rack and Pinion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 12 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock to Lock:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round, tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Steering Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Back mount, U-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Stations:\u003c\/strong\u003e Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 x 32 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.86 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092137\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuitable for single-station boats powered by a single nonpower-assisted outboard engine up to V-6, or by a sterndrive, with minimal engine flutter or steering instability. If the engine is power-assisted, NFB steering should not be used.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTR118\u003c\/li\u003e\n\u003cli\u003eRX4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS15112?\u003c\/strong\u003e It is a 12 foot NFB (No FeedBack) rack and pinion steering kit for single-station boats, using SeaStar's Back Mount design so the helm and cable install as one unit from behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns from lock to lock does the SS15112 have?\u003c\/strong\u003e Four turns from lock to lock, which is the standard feel of SeaStar's patented NFB helm design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel does the SS15112 accept?\u003c\/strong\u003e It accepts steering wheels up to 16 inches in diameter on a standard 3\/4 inch round tapered steering wheel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the SS15112 rated for?\u003c\/strong\u003e It is suitable for single-station boats with a single nonpower-assisted outboard engine up to V-6, or sterndrives, with minimal engine flutter or steering instability. It should not be used if the engine is power-assisted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing the SS15112 require dash modification?\u003c\/strong\u003e No. The Back Mount design of the SS15112 allows the helm and cable to be installed as a unit from behind the dash without dash modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SS15112 replace?\u003c\/strong\u003e The SeaStar SS15112 is designed to replace TR118 and RX4 back mount rack steering systems on applicable single-station boats without requiring dash modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the SS15112?\u003c\/strong\u003e The cable length is 12 feet, as indicated by the 12 in the SS15112 product name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the cable output ends made of?\u003c\/strong\u003e The cable output ends on the SS15112 are stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS15112 weigh?\u003c\/strong\u003e The SeaStar SS15112 steering kit weighs 14.86 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15112 a complete kit or individual parts?\u003c\/strong\u003e It is sold as a complete steering kit, the SS15112 includes the NFB helm and cable needed for a single-station Back Mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SS15112 be used on a multi-station boat?\u003c\/strong\u003e The SS15112 is configured for single-station installations; it is not a multi-station kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is NFB steering?\u003c\/strong\u003e NFB stands for No FeedBack, a patented SeaStar helm design used in the SS15112 that reduces kickback felt through the wheel compared to standard rotary steering.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375201499,"sku":"TEL-SS15112","price":356.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Q2vcyi6wL_adcb444a-cf0b-4365-aee4-8b031211d705.jpg?v=1784478073"},{"product_id":"seastar-ss15113-nfb-back-mount-rack-steering-kit-with-13ft-single-cable-outboards-up-to-v-6","title":"SeaStar SS15113 NFB Rack Steering Kit, Back Mount Single Cable, 13 Feet","description":"\u003cp\u003eThe SeaStar SS15113 is a back-mount NFB (No Feedback) rack and pinion steering kit built for single-station boats running a single, non-power-assisted outboard engine up to a V-6. The rack design delivers a precise, direct feel with 4 turns lock-to-lock, giving the helmsman consistent response with minimal engine flutter or steering instability compared to rotary steering systems. The kit accepts a standard 3\/4 inch round tapered steering wheel shaft and is rated for wheels up to 16 inches in diameter, covering the great majority of helm setups on boats in this power range.\u003c\/p\u003e\u003cp\u003eEverything needed for a complete single-cable installation is included in one box: the back-mount rack, the 13-foot steering cable, the helm unit, a 90 degree bezel, and the mounting hardware. Because NFB steering relies on mechanical rack and pinion action rather than a feedback rotary case, it is intended strictly for manually steered outboard applications; it is not designed for use with power-assisted engines. The housing components are built in durable plastic for corrosion resistance in the marine environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15113\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e NFB (No Feedback) Rack and Pinion, Back Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Configuration:\u003c\/strong\u003e Single cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 13 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Steering Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e Single, non-power-assisted outboard engine up to V-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Back mount rack, 13-foot cable, helm, 90 degree bezel, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092120\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuitable for single-station boats with one non-power-assisted outboard engine up to V-6. Not for use with power-assisted engines.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS15113?\u003c\/strong\u003e It is a back-mount NFB (No Feedback) rack and pinion steering kit with a single 13-foot cable, built for single-station boats with one non-power-assisted outboard engine up to a V-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS15113 steering kit have?\u003c\/strong\u003e The SS15113 kit provides 4 turns from lock-to-lock, giving precise, direct steering feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel does this kit accept?\u003c\/strong\u003e The SS15113 uses a standard 3\/4 inch round tapered steering wheel shaft and accepts wheels up to 16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SS15113 be used with a power-assisted outboard?\u003c\/strong\u003e No. NFB (No Feedback) steering, including the SS15113, is designed only for manually steered, non-power-assisted outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the SS15113 rated for?\u003c\/strong\u003e This kit is suitable for a single non-power-assisted outboard engine up to V-6, on single-station boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS15113 steering kit box?\u003c\/strong\u003e The SS15113 kit includes the back-mount rack, a 13-foot steering cable, the helm unit, a 90 degree bezel, and mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable in the SS15113 kit?\u003c\/strong\u003e The steering cable supplied with the SS15113 kit is 13 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar SS15113 made from?\u003c\/strong\u003e The SS15113 steering kit components are made from plastic in a black finish, chosen for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS15113 steering kit weigh?\u003c\/strong\u003e The SS15113 steering kit weighs 15.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15113 a rack and pinion or rotary steering system?\u003c\/strong\u003e The SS15113 is a rack and pinion (back-mount NFB rack) system, which differs from rotary steering that uses a rounded diecast helm case behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS15113 work on multi-station boats?\u003c\/strong\u003e The SS15113 is a single-cable kit intended for single-station boat setups.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375234267,"sku":"TEL-SS15113","price":344.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Q2vcyi6wL_6826eaab-6bf0-4aae-88bb-d28f3583bbcb.jpg?v=1784478078"},{"product_id":"seastar-ss15114-nfb-pro-rack-single-cable-steering-system-14-ft-single-non-power-outboards-up-to-v-6","title":"SeaStar NFB Rack Single Cable Steering System SS15114, 14 Feet, Back Mount","description":"\u003cp\u003eThe SeaStar SS15114 is an NFB (No Feedback) rack and pinion single-cable steering system built for single-station boats. It is designed for use with a single non-power-assisted outboard engine up to a V-6, delivering minimal engine flutter or steering instability at the helm. The rack and pinion design gives a precise feel of 4 turns from lock-to-lock, so the helmsman gets consistent, predictable response without the vague, spongy feedback that can come with worn or mismatched steering hardware.\u003c\/p\u003e\u003cp\u003eThe kit includes the steering cable, helm, a 90 degree bezel, and the hardware needed for a back mount rack installation. The helm is fitted with a standard 3\/4 inch round tapered steering wheel shaft and accepts steering wheels up to 16 inches in diameter, making it compatible with a wide range of factory and aftermarket wheels. The cable itself uses stainless steel construction with stainless steel output ends for corrosion resistance in the marine environment, and the system is finished in black.\u003c\/p\u003e\u003cp\u003eThis is a 14 foot cable length system. Because it is a non-power-assisted (NFB) system, it should not be paired with a power-assisted engine; boats with power steering require a different steering solution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e Rack and Pinion (NFB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e Single non-power-assisted outboard engine up to V-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cable, helm, 90 degree bezel, and mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Back mount rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuitable for single-station boats powered by a single non-power-assisted outboard engine up to a V-6. Not for use with power-assisted engines.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SS15114 steering system designed for?\u003c\/strong\u003e SeaStar SS15114 is a rack and pinion NFB (No Feedback) single-cable steering system built for single-station boats with a single non-power-assisted outboard engine up to a V-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS15114 have?\u003c\/strong\u003e The SS15114 delivers 4 turns from lock-to-lock, giving a precise, consistent steering feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable?\u003c\/strong\u003e This system uses a 14 foot steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel shaft does the SS15114 use?\u003c\/strong\u003e A standard 3\/4 inch round tapered steering wheel shaft is used on the SeaStar SS15114 helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum steering wheel diameter this system accepts?\u003c\/strong\u003e The SS15114 NFB rack helm accepts steering wheels up to 16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SS15114 be used with a power-assisted engine?\u003c\/strong\u003e No. The SS15114 is an NFB (non-feedback) system and should not be used with a power-assisted engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS15114 kit?\u003c\/strong\u003e The kit includes the steering cable, the helm, a 90 degree bezel, and the mounting hardware needed for a back mount rack installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS15114 steering cable made from?\u003c\/strong\u003e The steering cable is stainless steel, including the stainless steel cable output ends, for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SeaStar SS15114 system?\u003c\/strong\u003e The SS15114 is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS15114 steering kit weigh?\u003c\/strong\u003e The SeaStar SS15114 steering kit weighs 15.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15114 suitable for multi-station boats?\u003c\/strong\u003e The SS15114 NFB rack single-cable system is suitable for single-station boats, not multi-station setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of mounting does the SS15114 rack use?\u003c\/strong\u003e The SS15114 uses a back mount rack design.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375299803,"sku":"TEL-SS15114","price":348.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61ftwU63FwL.jpg?v=1784478085"},{"product_id":"seastar-ss15115-nfb-no-feedback-rack-pinion-boat-steering-kit-with-15-ft-single-cable","title":"SeaStar NFB Rack and Pinion Steering Kit, Single Cable, 15 Feet, SS15115","description":"\u003cp\u003eThe SeaStar SS15115 is an NFB (No Feedback) rack and pinion steering kit built for boats using a single steering cable. The NFB helm design is engineered to eliminate feedback from the propeller through the steering wheel, giving the operator a smooth, consistent feel rather than the kickback associated with older feedback-style systems. The kit delivers four turns from lock to lock, providing precise, predictable steering response at the helm.\u003c\/p\u003e\u003cp\u003eRack and pinion steering differs from rotary steering in its mechanical layout: rotary steering uses a rounded diecast helm (steering gear case) mounted behind the dash, while rack and pinion steering uses a long geared rack assembly to translate wheel motion into cable movement. This design is part of the reason NFB rack systems deliver their no-feedback feel.\u003c\/p\u003e\u003cp\u003eThe kit includes a single 15 foot steering cable with stainless steel cable output ends for corrosion resistance in the marine environment, and is built around a standard 3\/4 inch round tapered steering wheel shaft for compatibility with common steering wheel hubs. Construction is steel with a black finish, and the kit is designed for straightforward, fast installation. Fit type is universal, making it suited to single-cable helm setups that accept a 15 foot NFB rack steering cable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e NFB (No Feedback) Rack and Pinion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Configuration:\u003c\/strong\u003e Single cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e Four turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 27 x 19.75 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18.81 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for single-cable NFB rack steering applications using a 3\/4 inch round tapered steering wheel shaft\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does NFB mean on the SeaStar SS15115 steering kit?\u003c\/strong\u003e NFB stands for No Feedback, referring to a helm design on the SS15115 that prevents propeller torque from kicking back through the steering wheel, unlike older feedback-style rotary steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS15115 have?\u003c\/strong\u003e Four turns from lock to lock, giving a precise and predictable steering feel on the SeaStar SS15115 rack and pinion kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length cable comes with the SS15115 kit?\u003c\/strong\u003e A single 15 foot steering cable is included with the SeaStar SS15115 NFB rack steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel shaft does this kit use?\u003c\/strong\u003e The SS15115 uses a standard 3\/4 inch round tapered steering wheel shaft, compatible with common steering wheel hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15115 a single-cable or dual-cable steering kit?\u003c\/strong\u003e The SeaStar SS15115 is a single-cable rack and pinion steering kit, meaning it uses one steering cable rather than a dual-cable setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between rack and pinion steering and rotary steering?\u003c\/strong\u003e Rotary steering uses a rounded diecast helm (steering gear case) mounted behind the dash, while the rack and pinion design used in the SS15115 uses a long geared rack assembly, which is part of what allows the NFB no-feedback feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SS15115 steering kit made from?\u003c\/strong\u003e The SeaStar SS15115 is constructed of steel with a black finish, and the steering cable output ends are stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS15115 steering kit weigh?\u003c\/strong\u003e The SeaStar SS15115 weighs 18.81 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SS15115 kit as packaged?\u003c\/strong\u003e The SeaStar SS15115 measures 27 x 19.75 x 5.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar SS15115 a universal-fit steering kit?\u003c\/strong\u003e Yes, the SS15115 is a universal-fit NFB rack steering kit designed for single-cable helm setups using a 3\/4 inch round tapered steering wheel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SS15115 steering kit?\u003c\/strong\u003e The SeaStar SS15115 kit includes one NFB rack and pinion steering unit with a single 15 foot cable and stainless steel cable output ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15115 a genuine SeaStar part?\u003c\/strong\u003e Yes, SS15115 is the SeaStar manufacturer part number for this NFB rack and pinion steering kit, not an aftermarket equivalent.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375398107,"sku":"TEL-SS15115","price":351.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61ftwU63FwL_97ef0b31-9f07-41ec-af3d-c6ae75f167ec.jpg?v=1784478094"},{"product_id":"seastar-ss15117-nfb-rack-pinion-steering-kit-with-17-ft-single-cable-fits-single-station-outboard-boats-up-to-v-6","title":"SeaStar SS15117 NFB Rack Steering Kit, Single Cable, 17 Feet, Back Mount","description":"\u003cp\u003eThe SeaStar SS15117 is a No Feedback (NFB) rack and pinion steering kit built for single-station boats powered by a single non-power-assisted outboard engine up to a V-6. NFB rack steering is designed to eliminate feedback at the helm, meaning the wheel does not kick back or fight the operator's hand, which gives a cleaner, more predictable steering feel through the full range of motion. This back mount rack system uses a single-cable design and delivers a precise 4 turns lock-to-lock, so the boat responds consistently whether making small course corrections or full-lock turns.\u003c\/p\u003e\u003cp\u003eThe kit is built around a long rack and pinion steering mechanism rather than a rotary (diecast helm housing) design, and it is engineered as a complete, ready-to-install system. It includes the steering cable, helm, a 90 degree bezel, and the mounting hardware needed to complete the installation, so no separate helm or cable purchase is required. The helm accepts a standard 3\/4 inch round tapered steering wheel shaft and is rated for steering wheels up to 16 inches in diameter, covering the most common wheel sizes used on single-station boats. With a 17 foot cable length, the SS15117 is sized for boats where the helm-to-engine run requires that distance. Because it is an NFB rack system, it is intended for non-power-assisted outboard applications; it is not intended for use with power-assisted engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e NFB (No Feedback) Rack Steering Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Back Mount Rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Configuration:\u003c\/strong\u003e Single Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Feel:\u003c\/strong\u003e 4 turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Steering Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Steering cable, helm, 90 degree bezel, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092199\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-station boats with a single non-power-assisted outboard engine up to a V-6\u003c\/li\u003e\n\u003cli\u003eNot for use with power-assisted engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the SeaStar SS15117 designed for?\u003c\/strong\u003e The SS15117 NFB rack steering kit is designed for single-station boats with a single non-power-assisted outboard engine up to a V-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the SS15117?\u003c\/strong\u003e The SeaStar SS15117 uses a 17 foot single steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does NFB mean on this SeaStar steering kit?\u003c\/strong\u003e NFB stands for No Feedback, meaning the SS15117 rack steering system is designed so the wheel does not kick back or fight the operator's hand during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SS15117 be used with a power-assisted engine?\u003c\/strong\u003e No, the SS15117 is an NFB rack steering kit and cannot be used if the engine is power-assisted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat steering wheel shaft size does the SS15117 use?\u003c\/strong\u003e The SeaStar SS15117 accepts a standard 3\/4 inch round tapered steering wheel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum steering wheel diameter for this kit?\u003c\/strong\u003e The SS15117 NFB rack accepts steering wheels up to 16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS15117 kit?\u003c\/strong\u003e The kit includes the steering cable, helm, a 90 degree bezel, and the mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS15117 have?\u003c\/strong\u003e The SeaStar SS15117 delivers 4 turns from lock-to-lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15117 a single-cable or dual-cable steering system?\u003c\/strong\u003e The SS15117 is a single-cable back mount rack steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar SS15117 steering kit weigh?\u003c\/strong\u003e The SS15117 weighs 16.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15117 rack and pinion or rotary steering?\u003c\/strong\u003e The SS15117 is a rack and pinion steering system, which uses a long rack behind the dash rather than the rounded diecast helm housing used in rotary steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15117 suitable for a boat with a V-8 outboard?\u003c\/strong\u003e No, the SS15117 is intended for a single non-power-assisted outboard engine up to a V-6.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375693019,"sku":"TEL-SS15117","price":373.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Q2vcyi6wL_f5e87929-7d3a-4688-b757-e983f352cb4d.jpg?v=1784478113"},{"product_id":"seastar-ss15118-nfb-no-feedback-rack-steering-kit-single-cable-18-ft-single-station-outboard-boats-up-to-v-6","title":"SeaStar SS15118 NFB Rack Steering Kit, Single Cable, Back Mount, 18 Feet","description":"\u003cp\u003eThe SeaStar SS15118 is a No Feedback (NFB) rack and pinion steering kit built for single-station boats running a single non-power-assisted outboard engine up to a V-6. The NFB rack design eliminates feedback at the wheel, giving a precise, consistent feel of 4 turns from lock-to-lock without kickback or flutter transmitted from the engine or waves. The kit uses a single-cable back mount rack configuration and is supplied complete with the steering cable, helm, a 90 degree bezel, and all mounting hardware needed to install the system.\u003c\/p\u003e\u003cp\u003eThe helm accepts a standard 3\/4 inch round tapered steering wheel shaft and is rated for steering wheels up to 16 inches in diameter, making it compatible with the most common wheel sizes used on single-station outboard boats. This SS15118 kit is supplied with an 18 foot steering cable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Steering Kit, Back Mount Rack NFB, Single, 18 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Type:\u003c\/strong\u003e Rack and Pinion, No Feedback (NFB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Configuration:\u003c\/strong\u003e Single cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Steering Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Cable, helm, 90 degree bezel, and hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Engine Application:\u003c\/strong\u003e Single non-power-assisted outboard engine up to V-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092281\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00731957092281\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-station boats with a single non-power-assisted outboard engine up to a V-6\u003c\/li\u003e\n\u003cli\u003eNot for use with power-assisted engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does NFB mean on the SeaStar SS15118 steering kit?\u003c\/strong\u003e NFB stands for No Feedback, meaning the SS15118 rack steering system does not transmit kickback or flutter from the engine or waves back to the steering wheel, giving a consistent, precise feel of 4 turns lock-to-lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable in the SS15118 kit?\u003c\/strong\u003e The SeaStar SS15118 kit is supplied with an 18 foot steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15118 a single-cable or dual-cable steering system?\u003c\/strong\u003e The SS15118 is a single-cable back mount rack steering kit, designed for single-station boats using one steering cable rather than a dual-cable setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of engine setup is the SeaStar SS15118 designed for?\u003c\/strong\u003e This kit is designed for single-station boats with a single non-power-assisted outboard engine up to a V-6; it is not intended for power-assisted engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SS15118 be used with a power-assisted outboard?\u003c\/strong\u003e No, NFB steering systems like the SS15118 are for non-power-assisted engines; power-assisted outboards require a different steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel works with the SS15118?\u003c\/strong\u003e The SS15118 helm accepts a standard 3\/4 inch round tapered steering wheel shaft and is rated for steering wheels up to 16 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS15118 provide?\u003c\/strong\u003e The SeaStar SS15118 rack steering system provides a precise feel of 4 turns from lock-to-lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS15118 steering kit?\u003c\/strong\u003e The kit includes the steering cable, helm, a 90 degree bezel, and all mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar SS15118 steering kit weigh?\u003c\/strong\u003e The SS15118 steering kit weighs 16.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15118 a back mount or side mount rack system?\u003c\/strong\u003e The SS15118 is a back mount rack steering kit, part of SeaStar's NFB rack and pinion lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the SS15118 fit a multi-station boat?\u003c\/strong\u003e The SS15118 single-cable kit is built for single-station boats; multi-station setups require a different configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar SS15118 steering kit?\u003c\/strong\u003e The SeaStar SS15118 steering kit carries UPC 731957092281.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375791323,"sku":"TEL-SS15118","price":451.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Q2vcyi6wL_7a7fb8e1-a49e-4e0a-9f1a-9ffa63fca817.jpg?v=1784478123"},{"product_id":"seastar-ss15119-nfb-rack-steering-kit-with-19ft-single-cable-single-outboard-up-to-v-6-wheels-to-16-in","title":"SeaStar SS15119 NFB Rack and Pinion Steering Kit, Single Cable, 19 Feet","description":"\u003cp\u003eThe SeaStar SS15119 is a No Feedback (NFB) rack and pinion steering kit built for single-station boats running a single, non-power-assisted outboard engine up to a V-6. The NFB design eliminates kickback at the helm, giving the operator a precise, consistent feel through four turns from lock to lock regardless of engine torque or prop wash. This back mount, single-cable configuration comes with a 19 foot steering cable, making it a direct fit for boats already set up for back mount NFB rack steering.\u003c\/p\u003e\u003cp\u003eThe helm accepts a standard 3\/4 inch round tapered steering wheel shaft and is rated for steering wheels up to 16 inches in diameter, covering the large majority of helm wheel setups on runabouts and center consoles. The cable's output ends are stainless steel for corrosion resistance and a secure connection at the engine tilt tube. Installation follows standard NFB rack procedures, making it a straightforward swap for boat owners replacing worn or feedback-prone steering systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering System Type:\u003c\/strong\u003e Rack and Pinion, NFB (No Feedback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 19 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Configuration:\u003c\/strong\u003e Single cable, back mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Steering Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock to Lock:\u003c\/strong\u003e Four turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Engine Application:\u003c\/strong\u003e Single non-power-assisted outboard engine up to V-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 20 x 32 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092038\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuitable for single-station boats with a single non-power-assisted outboard engine up to a V-6. Accepts steering wheels up to 16 inches in diameter with a 3\/4 inch round tapered shaft.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo verified OEM cross-reference numbers are available for the SS15119.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable length on the SS15119 steering kit?\u003c\/strong\u003e The SeaStar SS15119 comes with a 19 foot steering cable, sized for back mount NFB rack installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel does this kit accept?\u003c\/strong\u003e The SS15119 accepts steering wheels up to 16 inches in diameter on a 3\/4 inch round tapered shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock to lock does the SS15119 have?\u003c\/strong\u003e Four turns from lock to lock, giving a precise and consistent feel at the helm with the SeaStar SS15119 NFB rack system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the SS15119 rated for?\u003c\/strong\u003e This kit is designed for a single, non-power-assisted outboard engine up to a V-6 on single-station boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does NFB mean on the SeaStar SS15119?\u003c\/strong\u003e NFB stands for No FeedBack, a steering design that reduces kickback and steering wheel flutter at the helm compared to standard rotary or feedback-prone systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15119 a back mount or side mount rack?\u003c\/strong\u003e The SeaStar SS15119 is a back mount rack and pinion steering kit with a single cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the cable output ends made of?\u003c\/strong\u003e The cable output ends on the SS15119 are stainless steel for corrosion resistance at the engine connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS15119 steering kit weigh?\u003c\/strong\u003e The complete kit weighs 17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of the SS15119?\u003c\/strong\u003e The SS15119 ships in a package measuring 20 x 32 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SS15119 be used with a power-assisted engine?\u003c\/strong\u003e No, the SeaStar SS15119 is designed for a non-power-assisted outboard engine; NFB steering is not intended for power-assisted engine setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the SS15119 have?\u003c\/strong\u003e The SeaStar SS15119 has a polished finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit suitable for multi-station boats?\u003c\/strong\u003e The SS15119 single-cable kit is intended for single-station boats, not multi-station helm configurations.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375856859,"sku":"TEL-SS15119","price":380.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Q2vcyi6wL_504395ce-7a52-440c-82b8-06ddd8ec52fe.jpg?v=1784478126"},{"product_id":"seastar-ss15212-nfb-pro-rack-back-mount-steering-kit-dual-cable-12-ft-mpn-ss15212-universal-boat-fit","title":"SeaStar SS15212 NFB Pro Rack Dual Cable Steering Kit, 12-Foot, Back Mount","description":"\u003cp\u003eThe SeaStar SS15212 is a complete NFB Pro Rack steering kit built around SeaStar's patented No FeedBack (NFB) steering mechanism, designed to eliminate the kickback and prop feedback that conventional steering systems transmit to the helm. This kit uses dual cables to minimize lost motion in the system, giving the helm a precise, consistent feel of 4 turns from lock-to-lock and minimal clutch free play. The steering cable is 12 feet long, letting installers route it to fit a range of boat layouts.\u003c\/p\u003e\u003cp\u003eThe kit is built on a standard 3\/4 inch round tapered steering shaft and finishes its cable output ends in stainless steel for corrosion resistance. Installation uses a back mount design that allows the helm to be placed quickly in the dash, and the mounting hardware fits industry-standard SeaStar Solutions rack holes, so it drops into existing SeaStar rack mounting patterns without modification. The kit is finished in black.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15212\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering System Type:\u003c\/strong\u003e No FeedBack (NFB) rack steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Configuration:\u003c\/strong\u003e Dual cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 12 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Back mount, fits industry-standard SeaStar Solutions rack holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092373\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS15212 steering kit?\u003c\/strong\u003e The SS15212 is a complete NFB (No FeedBack) Pro Rack steering kit from SeaStar, built with dual cables and a 12-foot cable length for a back-mount installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS15212 have?\u003c\/strong\u003e 4 turns from lock-to-lock, giving a precise steering feel with minimal clutch free play.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable in this kit?\u003c\/strong\u003e The cable supplied with the SS15212 kit is 12 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SS15212 use a single or dual cable?\u003c\/strong\u003e It uses a dual-cable configuration, which minimizes lost motion in the steering system compared to a single-cable setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SS15212 use?\u003c\/strong\u003e A standard 3\/4 inch round tapered steering shaft is used on the SS15212 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'No FeedBack' mean on this SeaStar kit?\u003c\/strong\u003e No FeedBack (NFB) refers to SeaStar's patented steering mechanism used in the SS15212, which is designed to prevent prop and engine feedback from transmitting through the wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cable output ends made of on the SS15212?\u003c\/strong\u003e The cable output ends are stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SS15212 kit mounted?\u003c\/strong\u003e It uses a back mount design that allows quick placement in the dash, and its mounting hardware fits industry-standard SeaStar Solutions rack holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SeaStar SS15212 steering kit?\u003c\/strong\u003e The SS15212 kit is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS15212 steering kit weigh?\u003c\/strong\u003e The SS15212 kit weighs 19.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the SS15212 fit an existing SeaStar rack mounting cutout?\u003c\/strong\u003e Yes, the mounting hardware included with the SS15212 fits industry-standard SeaStar Solutions rack holes, so it fits existing SeaStar rack mounting patterns.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989375922395,"sku":"TEL-SS15212","price":688.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51OsXngn0zL.jpg?v=1784478133"},{"product_id":"seastar-nfb-rack-steering-kit-ss15120-single-cable-20-ft-for-single-non-power-assisted-outboards-up-to-v-6","title":"SeaStar SS15120 NFB Rack Steering Kit, Single Cable, 20 Feet","description":"\u003cp\u003eThe SeaStar SS15120 is a No Feedback (NFB) rack and pinion steering kit built for single-station boats running one non-power-assisted outboard engine up to a V-6. Because the rack and pinion design has no feedback, the helm stays free of kickback and engine flutter is minimized, giving a consistent, precise feel at the wheel across 4 turns from lock-to-lock. The kit ships as a complete back-mount system with a 20 foot single steering cable, a helm, a 90 degree bezel, and all mounting hardware needed for installation, so there is no need to source cable, helm, or bezel separately.\u003c\/p\u003e\u003cp\u003eThe helm accepts a standard 3\/4 inch round tapered steering wheel shaft and is designed for steering wheels up to 16 inches in diameter, covering the great majority of single-engine outboard helm setups. The system is finished in grey. Because it is an NFB (no feedback) design, it is intended strictly for non-power-assisted steering applications; it is not compatible with power-assisted steering engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Steering Kit, Back Mount Rack NFB, Single, 20 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering System Type:\u003c\/strong\u003e No Feedback (NFB) Rack and Pinion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cables:\u003c\/strong\u003e Single (1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurns Lock-to-Lock:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Shaft:\u003c\/strong\u003e 3\/4 inch round, tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wheel Diameter:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Cable, helm, 90 degree bezel, hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e Single non-power-assisted outboard engine, up to V-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092403\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Cables \u0026amp; Kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for single-station boats with one non-power-assisted outboard engine up to a V-6, using a steering wheel up to 16 inches in diameter with a 3\/4 inch round tapered shaft.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does NFB mean on the SS15120 steering kit?\u003c\/strong\u003e NFB stands for No Feedback, meaning the SS15120 rack and pinion steering system is designed to prevent kickback or wheel torque being transmitted back from the engine, giving a smooth, consistent feel at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable in this kit?\u003c\/strong\u003e The SS15120 kit includes a single 20 foot steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single-cable or dual-cable system?\u003c\/strong\u003e SS15120 is a single-cable steering kit, suitable for single-station boats with one outboard engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering wheel does the SS15120 accept?\u003c\/strong\u003e The kit is designed for steering wheels up to 16 inches in diameter and uses a standard 3\/4 inch round tapered steering wheel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does this steering kit have?\u003c\/strong\u003e The SS15120 provides 4 turns from lock-to-lock for precise steering feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used with a power-assisted outboard engine?\u003c\/strong\u003e No. Because SS15120 is an NFB (No Feedback) system, it cannot be used on engines with power-assisted steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the SS15120 rated for?\u003c\/strong\u003e SS15120 is intended for a single non-power-assisted outboard engine up to a V-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the SS15120 kit?\u003c\/strong\u003e The kit includes the steering cable, helm, a 90 degree bezel, and all mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SS15120 steering kit?\u003c\/strong\u003e The kit is finished in grey.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS15120 steering kit weigh?\u003c\/strong\u003e The complete SS15120 kit weighs 17.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15120 a back-mount or side-mount steering system?\u003c\/strong\u003e SS15120 is a back-mount rack steering kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar SS15120?\u003c\/strong\u003e The UPC for the SeaStar SS15120 steering kit is 731957092403.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989376053467,"sku":"TEL-SS15120","price":383.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Q2vcyi6wL_bb88c16a-d625-4594-a426-adb132463493.jpg?v=1784478140"},{"product_id":"seastar-ss15216-nfb-pro-rack-steering-kit-dual-cable-16-ft-back-mount-no-feedback-boat-steering-system","title":"SeaStar SS15216 NFB Pro Rack Dual Cable Steering Kit, Back Mount, 16 Feet","description":"\u003cp\u003eThe SeaStar SS15216 is a No FeedBack (NFB) Pro Rack Steering Kit built around a dual-cable rack helm, designed to eliminate the kickback and lost motion common in single-cable rack steering systems. The patented No FeedBack steering mechanism uses two cables working in tandem to minimize lost motion through the system, giving the helm a precise, consistent feel across a tight 4 turns lock-to-lock. Minimal clutch free play keeps steering response tight even after extended use.\u003c\/p\u003e\u003cp\u003eThis kit is built for fast, straightforward installation: the back mount design allows the helm to be placed quickly behind the dash, and the mounting hardware fits industry-standard SeaStar Solutions rack holes so it drops into compatible dash setups without custom fabrication. The helm uses a standard 3\/4 inch round tapered steering shaft, and the dual cables terminate in stainless steel cable output ends for corrosion resistance at the connection points. This kit includes 16 feet of dual steering cable, sized for larger boats and longer helm-to-engine cable runs. It is a universal-fit boat steering kit, suited to installations that call for a back-mount NFB rack helm with a 16-foot dual cable run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SS15216\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e NFB Pro Rack Steering Kit (Dual Cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Mechanism:\u003c\/strong\u003e Patented No FeedBack (NFB) steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Configuration:\u003c\/strong\u003e Dual cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock-to-Lock Turns:\u003c\/strong\u003e 4 turns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Shaft:\u003c\/strong\u003e 3\/4 inch round tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Output Ends:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Back mount design; fits industry-standard SeaStar Solutions rack holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957092236\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boats using a back-mount NFB rack helm system with mounting hardware sized for industry-standard SeaStar Solutions rack holes.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar SS15216 steering kit?\u003c\/strong\u003e The SS15216 is a No FeedBack (NFB) Pro Rack dual-cable steering kit, consisting of a back-mount NFB rack helm paired with 16 feet of dual steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many turns lock-to-lock does the SS15216 have?\u003c\/strong\u003e The SS15216 rack helm gives 4 turns lock-to-lock, providing a precise steering feel through the dual-cable NFB mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable in this kit?\u003c\/strong\u003e This kit includes 16 feet of dual steering cable, matched to the SS15216 back-mount NFB rack helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'No FeedBack' mean on the SS15216?\u003c\/strong\u003e No FeedBack (NFB) refers to SeaStar's patented steering mechanism used in the SS15216, which is designed to prevent kickback at the helm and, combined with dual cables, minimize lost motion through the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the SS15216 use?\u003c\/strong\u003e The SS15216 uses a standard 3\/4 inch round tapered steering shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cable output ends made of?\u003c\/strong\u003e The dual cables on the SS15216 terminate in stainless steel cable output ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the SS15216 fit my existing dash cutout?\u003c\/strong\u003e The SS15216 uses a back mount design with mounting hardware that fits industry-standard SeaStar Solutions rack holes, allowing quick placement in dashes already set up for that hole pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the SS15216 compatible with?\u003c\/strong\u003e The SS15216 is a universal-fit boat steering kit intended for installations requiring a back-mount NFB rack helm with a 16-foot dual cable run, rather than being limited to one specific boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the SS15216 kit?\u003c\/strong\u003e The SS15216 kit includes the NFB back-mount rack helm and 16 feet of dual steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SS15216 steering kit weigh?\u003c\/strong\u003e The SS15216 steering kit weighs 21.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a dual-cable NFB rack kit like the SS15216 over a single-cable system?\u003c\/strong\u003e The dual cables in the SS15216 minimize lost motion in the system compared to single-cable rack setups, while the NFB mechanism keeps clutch free play to a minimum for a tighter steering feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SS15216 a genuine SeaStar part?\u003c\/strong\u003e Yes, the SS15216 is a genuine SeaStar NFB Pro Rack dual-cable steering kit identified by SeaStar part number SS15216.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989376381147,"sku":"TEL-SS15216","price":748.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51DaCkz9tfL.jpg?v=1784478169"},{"product_id":"uflex-g86-racktech-2-0-single-cable-rack-and-pinion-boat-steering-helm-with-m86-armored-cable","title":"Uflex G86 Racktech Rack and Pinion Steering Helm, Preassembled Rack and Cable","description":"\u003cp\u003eThe Uflex G86 Racktech is a preassembled rack and pinion steering package that pairs a rack and pinion helm with a matched steering cable in a single, ready-to-install unit. It features the M86 cable, built with an armor wrapped stainless steel core that delivers maximum efficiency and minimal lost motion at the helm, so steering input translates directly to the drive with less play than a loosely matched cable-and-helm setup.\u003c\/p\u003e\u003cp\u003eThe compact design of the Racktech makes it well suited to boats with minimal clearance behind the dash, where a bulkier steering assembly will not fit. Uflex recommends the Racktech for power assisted sterndrives and other applications with minimal rudder torque, making it a fit for helm stations where reduced steering effort is already provided by power assist rather than by the mechanical advantage of the steering system itself. The package ships as a single cable rack helm with a package quantity of one and is manufactured in the United States.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e G86\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Racktech 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Cable Model:\u003c\/strong\u003e M86\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor wrapped stainless steel core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Preassembled rack and pinion helm with single steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10.9 cm (L) x 11.2 cm (W) x 32.3 cm (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755015048\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex G86 Racktech?\u003c\/strong\u003e It is a preassembled rack and pinion steering package that comes with the M86 steering cable already matched to the helm, sold under Uflex part number G86.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the G86 Racktech recommended for?\u003c\/strong\u003e Uflex recommends the Racktech G86 for power assisted sterndrives and other applications with minimal rudder torque, and for boats with minimal clearance behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the G86 come with the steering cable included?\u003c\/strong\u003e Yes, the G86 is a single cable rack helm that ships preassembled with the M86 steering cable, so no separate cable purchase is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is special about the M86 cable used with the G86 helm?\u003c\/strong\u003e The M86 cable used in the Uflex G86 Racktech has an armor wrapped stainless steel core, which is designed to deliver maximum efficiency and minimal lost motion at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Uflex G86 weigh?\u003c\/strong\u003e The Uflex G86 Racktech rack and pinion steering helm weighs 2.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the G86 helm?\u003c\/strong\u003e The Uflex G86 ships in packaging measuring 10.9 cm long by 11.2 cm wide by 32.3 cm high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the G86 helm compact enough for a tight dash installation?\u003c\/strong\u003e Yes, the Racktech design behind the G86 is specifically built for boats with minimal clearance behind the dash, making it a compact alternative for tight helm stations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a rack and pinion helm like the G86 over a standard rotary steering system?\u003c\/strong\u003e The Uflex G86 Racktech uses a compact rack and pinion helm rather than a traditional rotary steering system, which is what allows it to fit installations with minimal clearance behind the dash while still being suited to power assisted sterndrives with minimal rudder torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the G86 helm interchangeable with a standard rotary steering cable?\u003c\/strong\u003e The G86 is part of the Racktech rack and pinion system and uses the matched M86 cable, so it is intended to be installed as the complete preassembled package rather than mixed with a different style of steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Uflex G86 Racktech helm made?\u003c\/strong\u003e The Uflex G86 single cable rack helm is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the G86 helm need power assist steering to work?\u003c\/strong\u003e Uflex recommends the G86 Racktech for power assisted sterndrives and other applications with minimal rudder torque, so it is intended for use where steering effort is already reduced by power assist or low rudder torque.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991092146395,"sku":"UFX-G86","price":94.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFX-G86__11551.1752670760.500.750.jpg?v=1785187985"},{"product_id":"uflex-racktech-racktech10-rack-and-pinion-boat-steering-system-10-ft-cable","title":"Uflex RackTech RACKTECH10 Rack and Pinion Steering System with TM87 Cable, 10 Feet 10 Inches","description":"\u003cp\u003eThe Uflex RackTech RACKTECH10 is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, such as ski boats and other boats with smaller freeboard. Unlike a rotary helm, the rack and pinion design suits tight installations behind the dash, and the RACKTECH10 is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003eThe package includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel. Steering effort is transmitted through the TM87 Rack Cable, which uses an armor wrapped stranded wire core for high efficiency and smooth steering with minimal lost motion. As with conventional rotary helms, steering loads in a rack and pinion system are transmitted to a single contact point, so the system will experience uneven wear over time the same as a rotary setup.\u003c\/p\u003e\u003cp\u003eThe RACKTECH10 measures 10 feet 10 inches and ships with product dimensions of 29.02 x 5 x 17.99 inches, at a package weight of 12.6 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rack and Pinion Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 29.02 x 5 x 17.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e TM87 Rack Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm:\u003c\/strong\u003e M86 preassembled helm with steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Assembly:\u003c\/strong\u003e G86\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e X34, 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755018971\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Application:\u003c\/strong\u003e Power assisted sterndrives and applications with minimal rudder torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe RACKTECH10 is recommended for power assisted sterndrives and other applications with minimal rudder torque, and is well suited to ski boats and other boats with limited clearance between the driver's knees and the helm.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex RACKTECH10?\u003c\/strong\u003e The RACKTECH10 package includes the M86 preassembled helm with steering cable, the G86 shaft assembly, the X34 90 degree bezel, and the TM87 Rack Cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of steering system is the RACKTECH10?\u003c\/strong\u003e It is a rack and pinion steering system, a design commonly used on boats where space between the driver's knees and the steering helm is limited, such as ski boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the RACKTECH10 steering cable?\u003c\/strong\u003e The Uflex RACKTECH10 measures 10 feet 10 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the RACKTECH10 recommended for?\u003c\/strong\u003e Uflex recommends the RACKTECH10 for power assisted sterndrives and other applications with minimal rudder torque, and for boats with limited clearance behind the dash, such as ski boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the TM87 Rack Cable made of?\u003c\/strong\u003e The TM87 Rack Cable used in the RACKTECH10 package has an armor wrapped stranded wire core, designed for high efficiency and smooth steering with minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RACKTECH10 weigh?\u003c\/strong\u003e The RACKTECH10 rack and pinion steering system weighs 12.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of the RACKTECH10?\u003c\/strong\u003e The RACKTECH10 has product dimensions of 29.02 x 5 x 17.99 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH10 include the bezel and helm, or are those sold separately?\u003c\/strong\u003e The RACKTECH10 is a complete package that includes the M86 helm, G86 shaft assembly, and X34 bezel along with the TM87 Rack Cable, so no separate helm or bezel purchase is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a rack and pinion system like the RACKTECH10 differ from a rotary helm?\u003c\/strong\u003e Both designs transmit steering loads to a single contact point and experience uneven wear over time, but the RACKTECH10's rack and pinion layout fits in tighter spaces behind the dash than a conventional rotary helm, making it a common choice for ski boats and boats with smaller freeboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bezel angle on the RACKTECH10?\u003c\/strong\u003e The X34 bezel included with the RACKTECH10 is a 90 degree bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH10 suitable for high rudder torque applications?\u003c\/strong\u003e No, the RACKTECH10 is recommended for power assisted sterndrives and other applications with minimal rudder torque rather than high rudder torque setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this Uflex steering system?\u003c\/strong\u003e The manufacturer part number is RACKTECH10, Uflex's RackTech rack and pinion steering system.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991108825307,"sku":"UFX-RACKTECH10","price":238.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/913rTmSUIzL.jpg?v=1784491790"},{"product_id":"uflex-racktech-13-rack-and-pinion-marine-steering-system-racktech13-compact-helm-cable-and-90-degree-bezel-kit","title":"Uflex RACKTECH13 RackTech 13 Foot Rack and Pinion Steering System","description":"\u003cp\u003eThe Uflex RACKTECH13 is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, a layout common on ski boats and other vessels with lower freeboard. Unlike a conventional rotary helm, the rack and pinion design offers a compact installation footprint while still transmitting steering loads through a single contact point. The system is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003eThe kit is supplied as a complete package: the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel. Steering is handled by the TM87 Rack Cable, which uses an armor wrapped stranded wire core for high efficiency transmission and smooth, low-lost-motion steering feel. Because everything ships as a matched set, installers do not need to separately source a helm, cable, and bezel to complete the steering run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Rack and pinion steering system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e TM87 Rack Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e M86 preassembled helm with steering cable, G86 shaft assembly, X34 90 degree bezel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power assisted sterndrives and applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 29.02 x 5 x 17.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755019008\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex RACKTECH13 designed for?\u003c\/strong\u003e The RACKTECH13 is a rack and pinion steering system designed for boats with limited space between the driver's knees and the steering helm, a layout common on ski boats and other lower-freeboard vessels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the RACKTECH13 kit?\u003c\/strong\u003e The kit includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, so the full steering package arrives as a matched set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of cable does the RACKTECH13 use?\u003c\/strong\u003e It uses the TM87 Rack Cable, which has an armor wrapped stranded wire core for high efficiency and smooth steering with minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH13 suitable for power assisted sterndrives?\u003c\/strong\u003e Yes, the RACKTECH13 rack and pinion system is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a rack and pinion system differ from a conventional rotary helm?\u003c\/strong\u003e Like a conventional rotary helm, the RACKTECH13 rack and pinion design transmits steering loads through a single contact point, but its compact layout suits boats where dash-to-helm clearance is tight, unlike bulkier rotary helm setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RACKTECH13 weigh?\u003c\/strong\u003e The Uflex RACKTECH13 steering system weighs 13.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RACKTECH13 package?\u003c\/strong\u003e The RACKTECH13 measures 29.02 x 5 x 17.99 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH13 include the bezel and helm, or are those sold separately?\u003c\/strong\u003e Everything is included in one package: the X34 90 degree bezel and M86 preassembled helm with steering cable ship together with the RACKTECH13 system, along with the G86 shaft assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH13 a good fit for a boat with a lot of dash clearance?\u003c\/strong\u003e Not necessarily the best choice; Uflex notes that boats with more space behind the dash can take advantage of planetary gear designed rotary helms instead, which reduce feedback and improve helm longevity compared to a rack and pinion setup like the RACKTECH13.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the length of the RACKTECH13 steering cable system?\u003c\/strong\u003e The RACKTECH13 is the 13 foot version of Uflex's RackTech rack and pinion steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex RACKTECH13?\u003c\/strong\u003e The Uflex RACKTECH13 rack and pinion steering system carries UPC 702755019008.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991108956379,"sku":"UFX-RACKTECH13","price":238.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Da2_dg6EL.jpg?v=1784491805"},{"product_id":"uflex-racktech11-racktech-rack-and-pinion-boat-steering-system-11-ft-cable-compact-helm-90-degree-bezel","title":"Uflex RackTech RACKTECH11 Rack and Pinion Steering System, 11 Foot Cable","description":"\u003cp\u003eThe Uflex RACKTECH11 is a complete RackTech rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, a layout especially common on ski boats with lower freeboard. The package includes a helm, a bezel, and an 11 foot TM87 Rack Cable. The TM87 cable uses an armor wrapped stranded wire core for high efficiency and smooth steering feel, transmitting helm input to the outboard or sterndrive with minimal lost motion.\u003c\/p\u003e\u003cp\u003eLike conventional rotary helm systems, a rack and pinion setup transmits all steering loads through a single contact point, so some uneven wear over time is inherent to the design. RackTech is recommended for power assisted sterndrives and other applications with minimal rudder torque, where the compact rack and pinion footprint is an advantage over a larger rotary helm. Boat owners with adequate space behind the dash may instead consider a planetary gear rotary helm, which reduces steering feedback and can improve long-term helm life. For rack and pinion applications wanting a ZeroTorque feel, Uflex also offers the Accutech version, which adds a spring clutch for a smooth transition in and out of ZeroTorque mode; the RACKTECH11 package itself does not include this clutch feature.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e RackTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Rack and pinion steering system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e Helm, bezel, and steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Included:\u003c\/strong\u003e TM87 Rack Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 11 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power assisted sterndrives and applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 29.02 x 5 x 17.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 129 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755018988\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for power assisted sterndrives and other boats with minimal rudder torque, particularly ski boats and other layouts with limited space between the driver's knees and the steering helm.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex RACKTECH11 RackTech steering system?\u003c\/strong\u003e The RACKTECH11 package includes a steering helm, a bezel, and an 11 foot TM87 Rack Cable, giving you the full rack and pinion steering setup in one part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the RACKTECH11?\u003c\/strong\u003e The Uflex RACKTECH11 comes with an 11 foot TM87 Rack Cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of core does the RACKTECH11 steering cable have?\u003c\/strong\u003e The TM87 Rack Cable supplied with the RACKTECH11 uses an armor wrapped stranded wire core, which is designed for high efficiency and smooth steering with minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Uflex RACKTECH11 rack and pinion system designed for?\u003c\/strong\u003e RackTech is designed for boats where space between the driver's knees and the steering helm is limited, a layout common in the ski boat market, and it is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH11 the same as the Accutech ZeroTorque system?\u003c\/strong\u003e No. RackTech, including the RACKTECH11, is the standard rack and pinion package, while Accutech is the ZeroTorque version that adds a spring clutch for a smooth transition in and out of ZeroTorque mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes a rack and pinion system wear differently than a rotary helm?\u003c\/strong\u003e Rack and pinion systems like the RACKTECH11 transmit all steering loads through a single contact point, similar to conventional rotary helms, which can lead to uneven wear over time in either design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I choose RackTech or a rotary helm for my boat?\u003c\/strong\u003e If your boat has adequate space behind the dash, a planetary gear designed rotary helm is recommended to reduce steering feedback and improve helm longevity; the RACKTECH11 rack and pinion system is the better fit when that space is limited.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Uflex RACKTECH11 helm?\u003c\/strong\u003e The Uflex RACKTECH11 steering system is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RACKTECH11 package?\u003c\/strong\u003e The RACKTECH11 has item dimensions of 29.02 x 5 x 17.99 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Uflex RACKTECH11 weigh?\u003c\/strong\u003e The Uflex RACKTECH11 RackTech steering system weighs 129 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the bezel included with the RACKTECH11 or sold separately?\u003c\/strong\u003e The bezel is included as part of the RACKTECH11 package along with the helm and steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex RACKTECH11?\u003c\/strong\u003e The UPC for the Uflex RACKTECH11 RackTech steering system is 702755018988.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991108989147,"sku":"UFX-RACKTECH11","price":238.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71IMJXkEBRL.jpg?v=1784491809"},{"product_id":"uflex-racktech-racktech14-rack-and-pinion-boat-steering-system-14-ft-helm-bezel-cable-kit","title":"Uflex RACKTECH14 RackTech Rack and Pinion Steering System, 14 Foot Cable","description":"\u003cp\u003eThe Uflex RACKTECH14 RackTech is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, a common constraint on ski boats and other low-freeboard hulls. The kit brings together an M86 preassembled helm with steering cable, a G86 shaft assembly, and an X34 90 degree bezel, so everything needed to convert or install rack and pinion steering arrives as one matched system rather than separately sourced parts.\u003c\/p\u003e\u003cp\u003eAt the core of the package is the 14 foot TM87 rack cable, which uses an armor wrapped stranded wire core for high efficiency, smooth steering feel, and minimal lost motion at the helm. Like conventional rotary helms, rack and pinion systems transmit steering load through a single contact point, and the RackTech's cable and shaft assembly are engineered to manage that load while keeping the compact footprint rack systems are chosen for. The system is recommended for power assisted sterndrives and other applications with minimal rudder torque, making it a fit for boats where a full-size rotary helm will not clear the dash or console.\u003c\/p\u003e\u003cp\u003eFinished in black metal construction with a Power Grip mounting type, the RackTech installs as a drop-in steering upgrade or OEM-style replacement for boats originally equipped with rack and pinion steering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rack and Pinion Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Cable Model:\u003c\/strong\u003e TM87\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm:\u003c\/strong\u003e M86 preassembled helm with steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Assembly:\u003c\/strong\u003e G86\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e X34, 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 29.02 x 5 x 17.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Power Grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755019015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for boats with limited space between the driver's knees and the steering helm, including ski boats and other low-freeboard hulls, for power assisted sterndrives and other applications with minimal rudder torque. No specific make, horsepower, or year fitment is specified for this system.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this system.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of steering system is the Uflex RACKTECH14?\u003c\/strong\u003e The RACKTECH14 is a rack and pinion steering system, a compact steering type designed for boats where space between the driver's knees and the helm is limited, such as many ski boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the RACKTECH14 package?\u003c\/strong\u003e The package includes an M86 preassembled helm with steering cable, a G86 shaft assembly, an X34 90 degree bezel, and the 14 foot TM87 rack cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the RACKTECH14?\u003c\/strong\u003e The TM87 rack cable included with the RACKTECH14 is 14 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable core made of?\u003c\/strong\u003e The TM87 rack cable used in the RACKTECH14 has an armor wrapped stranded wire core, which is built for high efficiency and smooth steering with minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats or applications is the RACKTECH14 recommended for?\u003c\/strong\u003e Uflex recommends the RACKTECH14 for power assisted sterndrives and other applications with minimal rudder torque, particularly on boats with limited clearance behind the dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RACKTECH14 weigh?\u003c\/strong\u003e The RACKTECH14 rack and pinion steering system weighs 14.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RACKTECH14?\u003c\/strong\u003e The RACKTECH14 measures 29.02 x 5 x 17.99 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and material is the RACKTECH14 bezel and helm?\u003c\/strong\u003e The RACKTECH14 system is finished in black metal construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the RACKTECH14 mounted?\u003c\/strong\u003e The RACKTECH14 uses a Power Grip mounting type for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the RackTech and the Accutech steering systems?\u003c\/strong\u003e The RackTech, including the RACKTECH14, is a standard rack and pinion package with a helm, bezel, and TM87 cable, while the Accutech is a ZeroTorque version of the rack and pinion design that adds a spring clutch for smooth transition in and out of ZeroTorque mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH14 fit boats with limited dash clearance?\u003c\/strong\u003e Yes, the RACKTECH14 rack and pinion steering system is specifically designed for boats with limited space between the driver's knees and the steering helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bezel included with the RACKTECH14?\u003c\/strong\u003e Yes, the RACKTECH14 package includes an X34 90 degree bezel along with the helm, shaft assembly, and rack cable.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991109087451,"sku":"UFX-RACKTECH14","price":238.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51ahma5mWjL.jpg?v=1784491820"},{"product_id":"uflex-racktech-16-rack-and-pinion-marine-steering-system-with-tm87-rack-cable-helm-shaft-and-90-degree-bezel","title":"Uflex RackTech16 Rack and Pinion Steering System, 16 Foot Cable, Helm, Bezel and Shaft Assembly","description":"\u003cp\u003eThe Uflex RackTech16 is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited. This layout is particularly common on ski boats, where lower freeboard leaves less room for a conventional rotary helm setup. The RackTech16 system includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, giving installers a matched, compact package rather than separate components sourced individually.\u003c\/p\u003e\u003cp\u003eAt the core of the system is the TM87 Rack Cable, which uses an armor wrapped stranded wire core for high efficiency and smooth steering with minimal lost motion. Like conventional rotary helms, rack and pinion systems transmit steering loads to a single contact point, which results in uneven wear over time compared to planetary gear designed rotary helms; Uflex recommends a rotary helm instead when a boat has the available space, reserving RackTech for installations where clearance behind the dash is the limiting factor. The RackTech16 is suited to power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Rack and Pinion Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Cable:\u003c\/strong\u003e TM87 Rack Cable with armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e M86 preassembled helm with steering cable, G86 shaft assembly, X34 90 degree bezel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Application:\u003c\/strong\u003e Power assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 29 x 5 x 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755019039\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts \u0026amp; Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for boats with limited space between the driver's knees and the helm, such as ski boats with lower freeboard, and for power assisted sterndrive applications with minimal rudder torque.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex RackTech16?\u003c\/strong\u003e The RACKTECH16 package includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, all matched as one system rather than sold as separate parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the RackTech16?\u003c\/strong\u003e The RACKTECH16 uses a 16 foot TM87 Rack Cable with an armor wrapped stranded wire core for high efficiency and minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boats is the RackTech16 designed for?\u003c\/strong\u003e Rack and pinion systems like the RackTech16 are intended for boats with limited space between the driver's knees and the steering helm, a layout especially common on ski boats where freeboard tends to be smaller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RackTech16 suitable for power assisted steering?\u003c\/strong\u003e Yes, the RACKTECH16 is recommended for power assisted sterndrives and other applications where rudder torque is minimal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does rack and pinion steering compare to a rotary helm?\u003c\/strong\u003e Both rack and pinion systems and conventional rotary helms transmit steering loads to a single contact point, causing uneven wear over time; Uflex recommends a planetary gear designed rotary helm instead when the boat has room, since it reduces feedback and improves helm longevity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RackTech16 package?\u003c\/strong\u003e The Uflex RACKTECH16 steering system measures 29 x 5 x 18 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RackTech16 steering system weigh?\u003c\/strong\u003e The complete RACKTECH16 rack and pinion steering package weighs 14.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the X34 component in the RackTech16 kit?\u003c\/strong\u003e The X34 is the 90 degree bezel included with the RACKTECH16 helm assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the G86 component used for in this system?\u003c\/strong\u003e The G86 is the shaft assembly included in the RACKTECH16 rack and pinion steering package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RackTech16 include the helm unit?\u003c\/strong\u003e Yes, the RACKTECH16 includes the M86 preassembled helm along with its steering cable, so the helm does not need to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat core material does the TM87 rack cable use?\u003c\/strong\u003e The TM87 Rack Cable included with the RACKTECH16 has an armor wrapped stranded wire core, designed for high efficiency and smooth steering.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991109120219,"sku":"UFX-RACKTECH16","price":238.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6151YESHyLL.jpg?v=1784491821"},{"product_id":"uflex-racktech15-racktech-15-ft-rack-and-pinion-steering-system-compact-helm-bezel-and-cable-kit","title":"Uflex RACKTECH15 RackTech Rack and Pinion Steering System, 15 Foot Cable","description":"\u003cp\u003eThe Uflex RACKTECH15 is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, a layout common in the ski boat market where freeboard tends to be smaller than on other boat types. Unlike a conventional rotary helm, a rack and pinion system carries the steering load through a compact rack assembly rather than a rotary gear housing, allowing it to fit into tighter dash and console spaces while still delivering smooth, consistent steering feel.\u003c\/p\u003e\u003cp\u003eThe RACKTECH15 package includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, so the core components needed for the installation arrive as a matched set. Steering effort is transmitted through the TM87 Rack Cable, which uses an armor wrapped stranded wire core for high efficiency and smooth steering with minimal lost motion. This system is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Rack and Pinion Steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Cable Length:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Cable:\u003c\/strong\u003e TM87 Rack Cable with armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e M86 preassembled helm with steering cable, G86 shaft assembly, X34 90 degree bezel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Application:\u003c\/strong\u003e Power assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755019022\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex RACKTECH15?\u003c\/strong\u003e It is a complete rack and pinion steering package that includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, built around the 15 foot TM87 Rack Cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a rack and pinion system different from a rotary helm?\u003c\/strong\u003e A rack and pinion system such as the RACKTECH15 transmits steering loads through a compact rack assembly rather than a rotary gear housing, which allows it to fit boats with limited space between the driver's knees and the steering helm, a common constraint on ski boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the RACKTECH15?\u003c\/strong\u003e The package includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, along with the TM87 Rack Cable itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the RACKTECH15?\u003c\/strong\u003e The RACKTECH15 uses a 15 foot TM87 Rack Cable, as indicated by the 15 in its part number RACKTECH15.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of core does the RACKTECH15 cable use?\u003c\/strong\u003e The TM87 Rack Cable supplied with the RACKTECH15 has an armor wrapped stranded wire core, which is designed for high efficiency and smooth steering with minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the RACKTECH15 recommended for?\u003c\/strong\u003e This Uflex system is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RACKTECH15 steering system weigh?\u003c\/strong\u003e The complete Uflex RACKTECH15 package weighs 14.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH15 a good fit for boats with tight dash clearance?\u003c\/strong\u003e Yes, rack and pinion systems like the RACKTECH15 are commonly chosen for boats with minimal clearance behind the dash, since the design is more compact than a conventional rotary helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the RACKTECH15 and Uflex's Accutech system?\u003c\/strong\u003e The RACKTECH15 is a standard rack and pinion package, while the Accutech is Uflex's ZeroTorque version that adds a spring clutch for a smooth transition in and out of ZeroTorque mode; both use the same TM87 Rack Cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH15 come preassembled?\u003c\/strong\u003e The helm and steering cable arrive as the preassembled M86 unit within the RACKTECH15 package, along with the separate G86 shaft assembly and X34 90 degree bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do rack and pinion systems experience uneven wear?\u003c\/strong\u003e Like conventional rotary helms, the RACKTECH15 and other rack and pinion systems transmit all steering loads to a single contact point, which results in uneven wear over time compared to planetary gear designed rotary helms.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991109284059,"sku":"UFX-RACKTECH15","price":238.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Da2_dg6EL_c51cfb8f-3c09-4e78-a6bf-d53e1042bcaa.jpg?v=1784491831"},{"product_id":"uflex-racktech20-racktech-rack-and-pinion-steering-system-20-ft-cable-compact-helm-bezel-and-cable-kit-for-minimal-clearance-dash-installs","title":"Uflex RackTech20 Rack and Pinion Steering System with 20 Foot TM87 Rack Cable","description":"\u003cp\u003eThe Uflex RackTech20 is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, a common constraint on ski boats and other low-freeboard hulls. Rack and pinion steering routes all steering load through a single contact point rather than the distributed load path of a conventional rotary helm, which makes it well suited to tight dash clearances even though, like any rack system, it will see load concentrated at that one contact point over time.\u003c\/p\u003e\u003cp\u003eThe RACKTECH20 package includes a helm (M86) preassembled with its steering cable, a shaft assembly (G86), and a 90 degree bezel (X34). It is built around the TM87 Rack Cable, which uses an armor wrapped stranded wire core to deliver high steering efficiency and smooth feel with minimal lost motion. The system is recommended for power assisted sterndrives and other applications with minimal rudder torque, where a compact installation behind the dash matters more than the extended service life a planetary gear rotary helm can offer boats with more room to spare.\u003c\/p\u003e\u003cp\u003eThis listing is for the 20 foot cable length version of the RackTech system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Cable:\u003c\/strong\u003e TM87 Rack Cable, armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm:\u003c\/strong\u003e M86 preassembled helm with steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Assembly:\u003c\/strong\u003e G86\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e X34, 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755019077\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex RACKTECH20?\u003c\/strong\u003e The RACKTECH20 package includes an M86 preassembled helm with steering cable, a G86 shaft assembly, and an X34 90 degree bezel, all built around the 20 foot TM87 Rack Cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the RACKTECH20?\u003c\/strong\u003e The RACKTECH20 uses a 20 foot TM87 Rack Cable, as indicated by the '20' in its part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boats is the Uflex RackTech system designed for?\u003c\/strong\u003e Rack and pinion systems like the RACKTECH20 are designed for boats where space between the driver's knees and the steering helm is limited, which is common on ski boats and other boats with lower freeboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH20 recommended for all sterndrive applications?\u003c\/strong\u003e Uflex recommends the RACKTECH20 for power assisted sterndrives and other applications with minimal rudder torque, rather than high-torque steering applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat core does the TM87 Rack Cable use?\u003c\/strong\u003e The TM87 Rack Cable included with the RACKTECH20 has an armor wrapped stranded wire core, which is designed for high efficiency and smooth steering with minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the RackTech and Accutech systems?\u003c\/strong\u003e The RACKTECH20 is the standard rack and pinion package, while the Accutech is Uflex's ZeroTorque version of the rack and pinion system, which adds a spring clutch for smooth transition in and out of ZeroTorque mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes rack and pinion steering wear differently than a rotary helm?\u003c\/strong\u003e Rack and pinion systems such as the RACKTECH20 transmit steering loads through a single contact point, similar to a conventional rotary helm, which results in uneven wear at that contact point over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Uflex RACKTECH20 steering system weigh?\u003c\/strong\u003e The Uflex RACKTECH20 weighs 15.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bezel angle comes with the RACKTECH20?\u003c\/strong\u003e The RACKTECH20 package includes an X34 bezel set at a 90 degree angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a rack and pinion system over a rotary helm?\u003c\/strong\u003e A rack and pinion system such as the RACKTECH20 is recommended when space between the driver's knees and the steering helm is limited; boats with more available space are better served by a planetary gear designed rotary helm for reduced feedback and improved longevity.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991109415131,"sku":"UFX-RACKTECH20","price":238.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/712vuPtuMIL.jpg?v=1784491845"},{"product_id":"uflex-racktech-17-rack-and-pinion-boat-steering-system-racktech17","title":"Uflex RACKTECH17 RackTech Rack and Pinion Steering System, 17 Foot TM87 Cable","description":"\u003cp\u003eThe Uflex RACKTECH17 is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, such as ski boats and other craft with lower freeboard. Unlike a conventional rotary helm, a rack and pinion system is engineered for compact installations behind the dash, making it a practical choice when clearance is tight.\u003c\/p\u003e\u003cp\u003eThe RACKTECH17 package includes a helm, a bezel, and the TM87 rack cable. The TM87 cable uses an armor-wrapped stranded wire core, which is designed for high steering efficiency and smooth operation with minimal lost motion. This steering system is recommended for power-assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003eAs with conventional rotary helms, rack and pinion systems transmit steering loads through a single contact point, which can result in uneven wear over time within the system. The RACKTECH17 is the 17-foot cable length version of Uflex's Racktech steering package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rack and Pinion Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Model:\u003c\/strong\u003e TM87\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor-wrapped stranded wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Helm, bezel, TM87 rack cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 29.02 x 5 x 17.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Easy Snap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755019046\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power-assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for power-assisted sterndrives and other applications with minimal rudder torque, and commonly used on ski boats and other boats with limited space behind the dash.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for the RACKTECH17.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex RACKTECH17?\u003c\/strong\u003e The RACKTECH17 package includes a helm, a bezel, and the TM87 rack cable with an armor-wrapped stranded wire core.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the RACKTECH17?\u003c\/strong\u003e The RACKTECH17 uses a 17-foot TM87 rack cable, which is reflected in the part number itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of steering system is the RACKTECH17?\u003c\/strong\u003e It is a rack and pinion steering system, a design commonly used on boats with limited space between the driver's knees and the steering helm, such as ski boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH17 suitable for a sterndrive boat?\u003c\/strong\u003e Yes, the RACKTECH17 is recommended for power-assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is different about a rack and pinion system compared to a rotary helm?\u003c\/strong\u003e Rack and pinion systems, like the RACKTECH17, are more compact and fit boats with tighter space behind the dash, though like conventional rotary helms they transmit steering loads through a single contact point, which can cause uneven wear over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable core material on the RACKTECH17?\u003c\/strong\u003e The TM87 cable included with the RACKTECH17 has an armor-wrapped stranded wire core, designed for high efficiency and smooth steering with minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RACKTECH17 weigh?\u003c\/strong\u003e The Uflex RACKTECH17 weighs 14.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RACKTECH17 package?\u003c\/strong\u003e The item dimensions are 29.02 x 5 x 17.99 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH17 include a bezel?\u003c\/strong\u003e Yes, a bezel is included as part of the RACKTECH17 rack and pinion steering package, along with the helm and TM87 cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the RACKTECH17 best suited for?\u003c\/strong\u003e Boats with limited clearance between the driver's knees and the steering helm, such as ski boats with lower freeboard, are well suited to the RACKTECH17 rack and pinion system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the RACKTECH17 mounted?\u003c\/strong\u003e The RACKTECH17 uses an Easy Snap mounting type.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991109513435,"sku":"UFX-RACKTECH17","price":238.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/917ZCBuQLTL.jpg?v=1784491848"},{"product_id":"uflex-racktech18-racktech-rack-and-pinion-steering-system-18-ft-cable-compact-helm-bezel-and-cable-package","title":"Uflex RACKTECH18 RackTech 18 Foot Rack and Pinion Steering System","description":"\u003cp\u003eThe Uflex RACKTECH18 RackTech is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, such as ski boats that tend to have smaller freeboard. The system consists of a preassembled helm with steering cable, a shaft assembly, and a bezel, so the core components needed for a rack and pinion installation are included as a matched set.\u003c\/p\u003e\u003cp\u003eAt the heart of the system is the TM87 Rack Cable, which has an armor wrapped stranded wire core for high efficiency and smooth steering with minimal lost motion. Because the load path in a rack and pinion system directs steering forces to a single contact point, the RACKTECH18 is engineered to work as an integrated package rather than mixed with unrelated helm or cable components.\u003c\/p\u003e\u003cp\u003eThe RACKTECH18 is recommended for power assisted sterndrives and other applications with minimal rudder torque, and it suits boats with minimal clearance behind the dash where a compact installation is a priority. The package includes an M86 preassembled helm with steering cable, a G86 shaft assembly, and an X34 90 degree bezel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Rack and Pinion Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Model:\u003c\/strong\u003e TM87 Rack Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e M86 preassembled helm with steering cable, G86 shaft assembly, X34 90 degree bezel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 29.02 x 5 x 17.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755019053\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex RACKTECH18?\u003c\/strong\u003e The RACKTECH18 package includes an M86 preassembled helm with steering cable, a G86 shaft assembly, and an X34 90 degree bezel, along with the TM87 Rack Cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the RACKTECH18?\u003c\/strong\u003e The RACKTECH18 uses an 18 foot cable, as indicated by the part number and the system name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the RackTech rack and pinion system designed for?\u003c\/strong\u003e Rack and pinion systems like the RACKTECH18 are designed for boats where space between the driver's knees and the steering helm is limited, which is common on ski boats with smaller freeboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH18 suitable for sterndrive boats?\u003c\/strong\u003e Yes, the RACKTECH18 is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of cable does the RACKTECH18 use?\u003c\/strong\u003e It uses the TM87 Rack Cable, which has an armor wrapped stranded wire core for high efficiency and smooth steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH18 come with the helm and bezel, or just the cable?\u003c\/strong\u003e The RACKTECH18 is a complete package: it includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, not just the cable alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RACKTECH18 steering system weigh?\u003c\/strong\u003e The Uflex RACKTECH18 weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RACKTECH18 package?\u003c\/strong\u003e The RACKTECH18 measures 29.02 x 5 x 17.99 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a rack and pinion system differ from a rotary helm?\u003c\/strong\u003e Like conventional rotary helms, the RACKTECH18 rack and pinion system transmits all steering loads to one contact point, which results in uneven wear over time, a characteristic shared by both designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a ZeroTorque version of this Uflex steering system?\u003c\/strong\u003e Yes, Uflex's ZeroTorque version of the rack and pinion line is the Accutech, which adds a spring clutch for smooth transition in and out of ZeroTorque mode; the RACKTECH18 does not include this feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a rack and pinion system like the RACKTECH18 over a rotary helm?\u003c\/strong\u003e Rack and pinion systems such as the RACKTECH18 are chosen when there is limited space between the driver's knees and the helm, a common constraint on ski boats with smaller freeboard; where more space is available, a planetary gear rotary helm is recommended instead for reduced feedback and longer helm life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this steering system?\u003c\/strong\u003e The manufacturer part number is RACKTECH18, made by Uflex.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991109578971,"sku":"UFX-RACKTECH18","price":238.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/91hKA-6PKpL.jpg?v=1784491850"},{"product_id":"uflex-racktech-racktech19-rack-and-pinion-steering-system-19-ft-compact-sterndrive-steering-kit-with-armor-wrapped-cable","title":"Uflex RACKTECH19 RackTech Rack and Pinion Steering System with 19-Foot M86 Cable, OEM 57024 Equivalent","description":"\u003cp\u003eThe Uflex RACKTECH19 is a complete RackTech rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, such as ski boats and other boats with smaller freeboard. Unlike conventional rotary helm systems, where all steering loads transmit through a single contact point and cause uneven wear, the rack and pinion design of the RackTech system distributes steering effort differently, offering a compact installation that fits behind dashboards with minimal clearance.\u003c\/p\u003e\u003cp\u003eThe package includes the M86 preassembled helm with an integrated steering cable, the G86 shaft assembly, and the X34 90 degree bezel, giving you the full set of components needed for installation in one system. The steering cable features an armor wrapped stainless steel core for high efficiency and minimal lost motion, delivering smooth, responsive steering feel. The RACKTECH19 is recommended for power assisted sterndrives and other applications with minimal rudder torque, and carries an OEM equivalent part number of 57024 for cross-reference purposes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH19\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Rack and Pinion Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 19 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Model:\u003c\/strong\u003e M86, preassembled with helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor wrapped stainless steel core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Assembly:\u003c\/strong\u003e G86\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e X34, 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755019060\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e57024\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Uflex RACKTECH19?\u003c\/strong\u003e The RACKTECH19 is a complete rack and pinion steering package from Uflex that includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, with a 19 foot cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the RACKTECH19 designed for?\u003c\/strong\u003e This rack and pinion system is designed for boats with limited space between the driver's knees and the steering helm, such as ski boats and other boats with smaller freeboard, and is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable?\u003c\/strong\u003e The RACKTECH19 includes a 19 foot M86 steering cable with an armor wrapped stainless steel core.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable core made of?\u003c\/strong\u003e The M86 cable included with the RACKTECH19 has an armor wrapped stainless steel core, which is designed for high efficiency and minimal lost motion in steering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH19 come as a complete kit?\u003c\/strong\u003e Yes, the package includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, so all core steering components are included in one system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RACKTECH19 weigh?\u003c\/strong\u003e The Uflex RACKTECH19 rack and pinion steering system weighs 15.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the RACKTECH19?\u003c\/strong\u003e Yes, the RACKTECH19 has an OEM equivalent part number of 57024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a rack and pinion system different from a conventional rotary helm?\u003c\/strong\u003e In a conventional rotary helm, steering loads transmit through a single contact point, leading to uneven wear over time; the RACKTECH19 uses a rack and pinion design instead, which is a common alternative for boats with tight helm clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH19 the same as the Uflex Accutech system?\u003c\/strong\u003e No, the RACKTECH19 is the standard RackTech package, while the Accutech is a separate ZeroTorque version that adds a spring clutch for smooth transition in and out of ZeroTorque mode; both use the same TM87 style rack cable design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bezel angle does the RACKTECH19 include?\u003c\/strong\u003e The RACKTECH19 includes the X34 bezel, which is a 90 degree bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex RACKTECH19?\u003c\/strong\u003e The Uflex RACKTECH19 steering system carries UPC 702755019060.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH19 suitable for high steering torque applications?\u003c\/strong\u003e The RACKTECH19 is recommended for power assisted sterndrives and other applications with minimal rudder torque, rather than high torque, non-power-assisted setups.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991110201563,"sku":"UFX-RACKTECH19","price":238.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61O7cJEL1hL.jpg?v=1784491859"},{"product_id":"uflex-racktech12-racktech-12-ft-rack-and-pinion-steering-system-compact-helm-bezel-and-cable-for-power-assisted-sterndrives","title":"Uflex RackTech RACKTECH12 Rack and Pinion Steering System, 12 Foot TM87 Cable","description":"\u003cp\u003eThe Uflex RackTech RACKTECH12 is a complete rack and pinion steering package built for boats where space between the driver's knees and the steering helm is limited, such as ski boats and other boats with smaller freeboard. Rack and pinion steering systems mount differently than a conventional rotary helm, offering a compact installation behind the dash where clearance is tight. RackTech is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003eThe system includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel, giving installers the core components needed for a rack and pinion setup in one package. Steering effort is transmitted through the TM87 Rack Cable, which uses an armor wrapped stranded wire core for high efficiency and smooth steering with minimal lost motion. As with conventional rotary helms, a rack and pinion system transmits steering loads through a single contact point, so buyers with adequate dash clearance may instead consider Uflex's planetary gear rotary helms for reduced feedback and extended longevity.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RACKTECH12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rack and Pinion Steering System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 12 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Model:\u003c\/strong\u003e TM87 Rack Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Core:\u003c\/strong\u003e Armor wrapped stranded wire core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Assembly:\u003c\/strong\u003e M86 preassembled helm with steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Assembly:\u003c\/strong\u003e G86\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e X34, 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 29.02 x 5 x 17.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755018995\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Power assisted sterndrives and other applications with minimal rudder torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for boats with limited dash clearance, including ski boats, and for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Uflex RACKTECH12?\u003c\/strong\u003e The RACKTECH12 package includes the M86 preassembled helm with steering cable, the G86 shaft assembly, and the X34 90 degree bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the steering cable on the RACKTECH12?\u003c\/strong\u003e The RACKTECH12 uses a 12 foot TM87 Rack Cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable core made of?\u003c\/strong\u003e The TM87 Rack Cable on the RACKTECH12 has an armor wrapped stranded wire core for high efficiency and smooth steering with minimal lost motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of boats is the RackTech system designed for?\u003c\/strong\u003e Rack and pinion systems like the RACKTECH12 are designed for boats where space between the driver's knees and the steering helm is limited, which is common on ski boats and other boats with smaller freeboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RACKTECH12 suitable for sterndrive boats?\u003c\/strong\u003e Yes, the RACKTECH12 is recommended for power assisted sterndrives and other applications with minimal rudder torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RACKTECH12 weigh?\u003c\/strong\u003e The Uflex RACKTECH12 weighs 14.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RACKTECH12 package?\u003c\/strong\u003e The RACKTECH12 measures 29.02 x 5 x 17.99 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is rack and pinion steering different from a rotary helm?\u003c\/strong\u003e Rack and pinion systems, including the RACKTECH12, transmit steering loads through a single contact point similar to a conventional rotary helm, which can cause uneven wear in the system over time; buyers with more dash clearance may prefer a planetary gear rotary helm for reduced feedback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH12 include a bezel?\u003c\/strong\u003e Yes, the RACKTECH12 includes the X34 90 degree bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Uflex RACKTECH12?\u003c\/strong\u003e The UPC for the RACKTECH12 rack and pinion steering system is 702755018995.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RACKTECH12 come preassembled?\u003c\/strong\u003e The RACKTECH12 includes the M86 preassembled helm with steering cable, simplifying installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between RackTech and Accutech steering systems?\u003c\/strong\u003e RackTech is Uflex's standard rack and pinion steering package, while the Accutech is the ZeroTorque version that adds a spring clutch for smooth transition in and out of ZeroTorque mode; both use the TM87 Rack Cable.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991237177563,"sku":"UFX-RACKTECH12","price":238.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51m8p_vzj9L_3386a29a-b282-4af4-886d-5f0bf5cd7070.jpg?v=1784495541"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/UFX-G86__11551.1752670760.500.750.jpg?v=1785356541","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-steering-systems-steering-systems-kits-rack-pinion-steering-systems-kits.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}