{"title":"Steering Systems","description":null,"products":[{"product_id":"sierra-18-7508-power-steering-pump-for-mercruiser-mcm-mie-gm-v6-v8-283-305-350-cid-replaces-16792a39","title":"Sierra 18-7508 Power Steering Pump, Replaces 16792A39, 16792A33, MerCruiser MCM\/MIE GM V6 \u0026 V8 283\/305\/350 cid Engines","description":"\u003cp\u003eThe Sierra 18-7508 is a marine power steering pump built as a direct replacement for MerCruiser MCM\/MIE stern drive applications powered by GM V6 and V8 engines in the 283, 305, and 350 cubic inch displacement range. It is engineered to meet or exceed OEM performance, supplying the hydraulic pressure needed to actuate the sterndrive's steering cylinder and deliver reliable, consistent steering response at the helm.\u003c\/p\u003e\u003cp\u003eThis pump is a bolt-on replacement designed to install using the same mounting points and drive configuration as the original equipment pump it replaces, so it drops into the existing power steering circuit without modification. It is finished in white and ships as a single unit ready for installation. Every Sierra power steering pump is backed by Sierra's industry leading warranty, giving boat owners confidence that a failed or worn original pump can be swapped for a unit built to the same standard.\u003c\/p\u003e\u003cp\u003eBecause steering response and safety depend on a properly functioning pump, replacing a worn, leaking, or noisy power steering pump with the 18-7508 restores factory-level steering feel on GM-powered MerCruiser MCM\/MIE sterndrive boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7508\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 9.9 x 9.8 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282287221\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e MerCruiser MCM\/MIE GM V6 \u0026amp; V8 (283, 305 \u0026amp; 350 cid) engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMerCruiser MCM\/MIE sterndrives with GM V6 \u0026amp; V8 (283, 305 \u0026amp; 350 cid) engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16792A39\u003c\/li\u003e\n\u003cli\u003e16792A33\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and engines does the Sierra 18-7508 power steering pump fit?\u003c\/strong\u003e The Sierra 18-7508 is built for MerCruiser MCM\/MIE sterndrives powered by GM V6 and V8 engines in the 283, 305, and 350 cubic inch displacement range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-7508 replace?\u003c\/strong\u003e This pump replaces OEM numbers 16792A39 and 16792A33, so it can be used as a direct swap for either of those original part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7508 an OEM or aftermarket power steering pump?\u003c\/strong\u003e It is an aftermarket replacement pump manufactured by Sierra and built to meet or exceed the original MerCruiser OEM specification for these applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7508 power steering pump weigh?\u003c\/strong\u003e The pump weighs 10.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-7508 power steering pump?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-7508?\u003c\/strong\u003e Each order includes one complete power steering pump, the Sierra 18-7508, ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-7508 come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-7508 is backed by Sierra's industry leading warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 18-7508?\u003c\/strong\u003e The pump ships in packaging measuring 9.9 x 9.8 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7508 work on GM V8 350 cid MerCruiser applications?\u003c\/strong\u003e Yes, the 283, 305, and 350 cid GM V6 \u0026amp; V8 MCM\/MIE applications are all covered by the Sierra 18-7508.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 18-7508 straightforward for a DIY boat owner?\u003c\/strong\u003e The 18-7508 is designed as a direct replacement for the original MCM\/MIE power steering pump, so it mounts in the same location using the existing steering circuit connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my power steering pump needs replacing?\u003c\/strong\u003e Symptoms like stiff or inconsistent steering, pump noise, or fluid leaks on a MerCruiser MCM\/MIE GM V6 or V8 sterndrive typically indicate it is time to replace the pump with a unit like the Sierra 18-7508.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988386459867,"sku":"SIE-18-7508","price":637.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7508__50557.1753448931.500.750.jpg?v=1785188370"},{"product_id":"power-steering-pump-pulley-for-v-belt-sterndrives-replaces-73873a1-73873-sierra-18-8297","title":"Sierra Power Steering Pump Pulley 18-8297, Sterndrives with V-Belt, Replaces 73873A1, 73873","description":"\u003cp\u003eThe Sierra 18-8297 is a power steering pump pulley built for sterndrive engines equipped with a v-belt drive system. It mounts to the power steering pump shaft and, together with the drive belt, transfers rotational power from the engine to the pump so the steering system builds the hydraulic pressure needed for smooth helm response. This pulley is a direct fit for the v-belt sterndrive application it is designed for and is intended as a replacement for a worn, cracked, or damaged original pulley, or for a pulley that has developed excessive belt slip or wobble.\u003c\/p\u003e\u003cp\u003eReplacing a worn power steering pump pulley restores proper belt alignment and tension, which helps prevent belt squeal, premature belt wear, and inconsistent steering assist. Because it is designed specifically for v-belt sterndrive setups, it is not interchangeable with the serpentine-belt version of this pulley, so confirm your engine's belt type before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8297\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Steering Pump Pulley\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt Type:\u003c\/strong\u003e V-belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Sterndrives with v-belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3 x 7.5 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282294960\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSterndrives with v-belt\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e73873A1\u003c\/li\u003e\n\u003cli\u003e73873\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8297 pulley used for?\u003c\/strong\u003e The Sierra 18-8297 is a power steering pump pulley that mounts to the power steering pump shaft on a sterndrive engine equipped with a v-belt, transferring engine rotation to the pump to generate steering assist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-8297 pulley work with a serpentine belt engine?\u003c\/strong\u003e No. The 18-8297 is built specifically for sterndrives with a v-belt drive; a serpentine-belt engine requires a different power steering pump pulley.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-8297 replace?\u003c\/strong\u003e The Sierra 18-8297 power steering pump pulley replaces OEM numbers 73873A1 and 73873.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8297 pulley weigh?\u003c\/strong\u003e The Sierra 18-8297 power steering pump pulley weighs 1.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-8297 pulley?\u003c\/strong\u003e Product dimensions for the Sierra 18-8297 are 3 x 7.5 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8297 a genuine OEM part or an aftermarket replacement?\u003c\/strong\u003e The 18-8297 is a Sierra-brand replacement pulley engineered to replace OEM numbers 73873A1 and 73873, not an original manufacturer part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my power steering pump pulley?\u003c\/strong\u003e A pulley is typically replaced when it becomes worn, cracked, or damaged, or when belt slip and wobble develop, since a bad pulley can cause belt squeal and inconsistent steering assist. The 18-8297 restores proper belt alignment on v-belt sterndrive applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-8297 come with mounting hardware or a belt?\u003c\/strong\u003e The Sierra 18-8297 listing covers the power steering pump pulley itself; check your specific order details for whether hardware or a belt is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my sterndrive uses a v-belt or a serpentine belt?\u003c\/strong\u003e Check the belt routing on your engine: a v-belt is a single narrow grooved belt per pulley, while a serpentine belt is a wider single belt that snakes around multiple pulleys. The Sierra 18-8297 is for the v-belt configuration only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-8297 be installed as a direct replacement?\u003c\/strong\u003e Yes, the Sierra 18-8297 is designed as a direct replacement for the OEM pulley on sterndrives with a v-belt, matching the original 73873A1 and 73873 pulleys it replaces.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433449179,"sku":"SIE-18-8297","price":74.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8297__22433.1558186722.500.750.jpg?v=1785188206"},{"product_id":"sierra-18-9701-2-power-trim-steering-fluid-1-quart-marine-power-steering-trim-tilt-hydraulic-fluid","title":"Sierra Power Trim and Steering Fluid 18-9701-2, 32 oz (1 Quart) Marine Hydraulic Fluid","description":"\u003cp\u003eSierra Power Trim and Steering Fluid (part number 18-9701-2) is a 32 fluid ounce (1 quart) bottle of hydraulic fluid formulated for marine power trim and power steering systems. It is a liquid, 10W viscosity fluid rated to SAE J300 10W, packaged in a plastic bottle for easy pouring and controlled top-offs. The fluid is intended for marine use and is formulated to help prevent corrosion inside trim and steering components, which is important given the constant exposure of these systems to moisture and salt or fresh water environments.\u003c\/p\u003e\u003cp\u003eThis fluid is used to fill or top off hydraulic power trim\/tilt units and hydraulic power steering systems on boats, keeping internal components lubricated and protected while maintaining proper hydraulic function. Each bottle contains a single quart (32 fluid ounces) of fluid, sold as one item per package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9701-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim and Steering Fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Volume:\u003c\/strong\u003e 32 fluid ounces (1 quart)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Information:\u003c\/strong\u003e Bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e 10W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAE J300 Viscosity Grade:\u003c\/strong\u003e 10W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Marine power trim and power steering systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e Prevent corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic (bottle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282384388\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.95 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sierra 18-9701-2 used for?\u003c\/strong\u003e Sierra 18-9701-2 is a power trim and steering fluid used to fill or top off hydraulic power trim\/tilt units and power steering systems on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid comes in one bottle of 18-9701-2?\u003c\/strong\u003e Each bottle of Sierra 18-9701-2 contains 32 fluid ounces, which is 1 quart of power trim and steering fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat viscosity is Sierra 18-9701-2 power trim and steering fluid?\u003c\/strong\u003e It is a 10W fluid rated to the SAE J300 10W viscosity grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9701-2 formulated to protect against corrosion?\u003c\/strong\u003e Yes, the fluid is specifically formulated for marine use and helps prevent corrosion inside power trim and power steering components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form is this product in?\u003c\/strong\u003e Sierra 18-9701-2 is a liquid hydraulic fluid, supplied ready to use in a plastic bottle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fluid intended for marine or automotive use?\u003c\/strong\u003e Sierra 18-9701-2 is recommended for marine applications, specifically power trim and power steering systems on boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bottles are included when I order 18-9701-2?\u003c\/strong\u003e One bottle containing 32 fluid ounces (1 quart) of Sierra power trim and steering fluid is included per unit ordered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bottle made of?\u003c\/strong\u003e The 18-9701-2 fluid is packaged in a plastic bottle for pouring into trim and steering reservoirs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a bottle of Sierra 18-9701-2 weigh?\u003c\/strong\u003e A bottle of Sierra 18-9701-2 power trim and steering fluid weighs 1.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra 18-9701-2 have a UPC code?\u003c\/strong\u003e Yes, Sierra 18-9701-2 power trim and steering fluid carries UPC 808282384388.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436660443,"sku":"SIE-18-9701-2","price":7.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/FG__13844.1753840776.500.750.jpg?v=1785188029"},{"product_id":"sea-dog-230215-destroyer-steering-wheel-15-in-3-spoke-formed-304-stainless-steel-25-degree-dish","title":"Sea-Dog 230215 Destroyer Stainless Steel Boat Steering Wheel, 15 Inch, 25 Degree, 3-Spoke","description":"\u003cp\u003eThe Sea-Dog 230215 Destroyer Wheel is a 15 inch, 3-spoke boat steering wheel formed from stainless steel for durability and corrosion resistance in the marine environment. It is built with a 25 degree dish angle, positioning the wheel face at an angle to the steering shaft for a more ergonomic, comfortable grip and control at the helm compared to a flat wheel. The 3-spoke design gives a classic destroyer-style look while keeping the wheel light and easy to turn.\u003c\/p\u003e\u003cp\u003eStainless steel construction resists rust and salt spray, making this wheel suited to everyday use on saltwater and freshwater boats alike. The finished, formed steel spokes and rim are designed to hold up to sun, moisture, and regular helm use season after season. At 3.69 pounds, the wheel is substantial enough to feel solid at the helm without adding unnecessary weight to the steering system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 230215\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Formed Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spokes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Diameter:\u003c\/strong\u003e 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Angle:\u003c\/strong\u003e 25 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514230049\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 230215 steering wheel?\u003c\/strong\u003e The Sea-Dog 230215 is a 15 inch diameter steering wheel with a 25 degree dish angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 230215 wheel made of?\u003c\/strong\u003e It is made of formed stainless steel, giving the Sea-Dog 230215 corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many spokes does the Sea-Dog 230215 have?\u003c\/strong\u003e This is a 3-spoke steering wheel, part number 230215.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 230215 steering wheel weigh?\u003c\/strong\u003e The 230215 weighs 3.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 25 degree dish angle mean for this wheel?\u003c\/strong\u003e A 25 degree dish angle means the wheel face sits at an angle rather than flat to the steering shaft, which positions the rim closer to the driver for a more natural, ergonomic grip at the helm on the Sea-Dog 230215.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sea-Dog 230215 suitable for saltwater use?\u003c\/strong\u003e Yes, its stainless steel construction resists corrosion from salt spray and moisture, making the 230215 suitable for saltwater boating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 230215 wheel include a hub or mounting adapter?\u003c\/strong\u003e The listing covers the Sea-Dog 230215 steering wheel itself; a separate hub or mounting adapter matched to your steering system is used to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 230215?\u003c\/strong\u003e The UPC for the Sea-Dog 230215 steering wheel is 035514230049.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan accessories like a maneuvering knob be added to the 230215 wheel?\u003c\/strong\u003e Yes, Sea-Dog steering wheel maneuvering knobs are designed to attach to 1 inch by 3\/4 inch oval tubing and are compatible with the 230215 wheel among other Sea-Dog wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat style is the Sea-Dog 230215 steering wheel?\u003c\/strong\u003e The 230215 is a destroyer-style, 3-spoke design finished in stainless steel.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988552003803,"sku":"S-D-230215","price":149.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7809_3444dd35-5348-4be4-913d-2f8878971073.jpg?v=1784422846"},{"product_id":"sea-dog-232300-single-function-engine-control-chrome-plated-sand-cast-brass-top-mount-for-inboard-stern-drive-and-outboard-engines","title":"Sea-Dog Single Function Engine Control 232300, Chrome Plated Sand Cast Brass, ABYC P-14","description":"\u003cp\u003eThe Sea-Dog 232300 Single Function Engine Control is a top-mount, single-lever control built for inboard, stern drive, and outboard engines. One lever operates either throttle or shift, making it a straightforward choice for boats that need one control function rather than a combined dual-function unit. The housing is constructed of sand cast brass with a chrome plated finish, giving it the corrosion resistance and durability expected of a helm-mounted marine control that sees constant salt air and spray exposure.\u003c\/p\u003e\u003cp\u003eThis control meets ABYC engine control standard P-14, the recognized benchmark for marine engine control safety and performance. It mounts from the top using four #10 flat head fasteners (fasteners not included), and its dimensions are sized to fit standard helm console cutouts used across many inboard and outboard boat setups. Replacement control knobs are available separately in red (232318-1) or black (232319-1) if the original knob is lost or damaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 232300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Sand Cast Brass, Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Single Function (Throttle or Shift)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #10 Flat Head (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (A):\u003c\/strong\u003e 8-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (B):\u003c\/strong\u003e 6-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (C):\u003c\/strong\u003e 5-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth (D):\u003c\/strong\u003e 3-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Compliance:\u003c\/strong\u003e ABYC P-14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.314 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514232012\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for inboard, stern drive, and outboard engine applications.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sea-Dog 232300 control work with?\u003c\/strong\u003e The Sea-Dog 232300 is designed for inboard, stern drive, and outboard engine applications, controlling either throttle or shift with a single lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single or dual function control?\u003c\/strong\u003e The 232300 is a single function engine control, meaning one lever handles either throttle or shift, not both at the same time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 232300 control made of?\u003c\/strong\u003e It is constructed of sand cast brass with a chrome plated finish for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of the Sea-Dog 232300?\u003c\/strong\u003e The control measures 8-1\/2 inches (A), 6-5\/16 inches (B), 5-5\/16 inches (C), and 3-1\/8 inches (D), and mounts from the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sea-Dog 232300 meet ABYC standards?\u003c\/strong\u003e Yes, this control meets ABYC engine control standard P-14.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with the 232300?\u003c\/strong\u003e No, the control requires four #10 flat head fasteners for top mounting, and these fasteners are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sea-Dog 232300 weigh?\u003c\/strong\u003e The Sea-Dog 232300 Single Function Engine Control weighs 4.314 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get a replacement knob for this control?\u003c\/strong\u003e Yes, replacement knobs for the 232300 control are available separately in red (part number 232318-1) or black (part number 232319-1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 232300 the same as the Sea-Dog dual function control?\u003c\/strong\u003e No, the 232300 is the single function version; Sea-Dog's dual function control is a separate part built for single and dual helm station applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting style does the 232300 use?\u003c\/strong\u003e It uses a top mount design secured with four #10 flat head fasteners through the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 232300 control?\u003c\/strong\u003e The UPC for the Sea-Dog 232300 Single Function Engine Control is 035514232012.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988552036571,"sku":"S-D-232300","price":217.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7815.jpg?v=1784422860"},{"product_id":"sea-dog-232310-dual-function-engine-control-chrome-plated-brass-twin-lever-shift-throttle-for-inboard-stern-drive-outboard","title":"Sea-Dog Dual Function Engine Control, Chrome Plated Brass, Top Mount Shift and Throttle Control for Inboard, Stern Drive and Outboard Engines","description":"\u003cp\u003eThe Sea-Dog Dual Function Engine Control (232310) is a top-mount, twin-lever control built from sand cast brass with a chrome plated finish. One lever operates the shift function and the other operates the throttle, giving the operator independent command of gear and engine speed from a single control head. It is designed to work in both single and dual helm station applications; when installed at a second station, it requires the separately available 2nd Control Kit (232320). The control is suited to inboard, stern drive, and outboard engine setups and meets ABYC engine control standard P-14. The dual levers are fitted with color coded knobs (black and red) so the operator can distinguish shift from throttle at a glance, and the knobs are available as separate replacement parts if they wear out or need to be swapped. The housing measures 8-1\/2 inches by 6-3\/8 inches by 5-1\/2 inches by 4-1\/4 inches across its mounting footprint and is installed from the top using four #10 flat head fasteners, which are not included. Constructed of chrome plated sand cast brass, the control is built for durability in a marine environment while keeping the classic bright chrome appearance of the housing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 232310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dual Function Engine Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Sand Cast Brass, Chrome Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Dual Function (Shift and Throttle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener:\u003c\/strong\u003e #10 FH (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 8-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 6-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 5-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 4-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.922 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 1 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnob Colors:\u003c\/strong\u003e Black, Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514232029\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelm Station Applications:\u003c\/strong\u003e Single and Dual Helm Station\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Types:\u003c\/strong\u003e Inboard, Stern Drive, Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets ABYC Engine Control Standard P-14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Station Accessory:\u003c\/strong\u003e Requires 2nd Control Kit 232320\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sea-Dog 232310 dual function engine control do?\u003c\/strong\u003e It is a top-mount marine engine control with two levers on one housing: one lever controls shift and the other controls throttle, letting a single control head manage both gear and engine speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this control work at a second helm station?\u003c\/strong\u003e Yes, the Sea-Dog 232310 is built for both single and dual helm station applications, but a dual station setup requires the separately available 2nd Control Kit, part number 232320.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is this control compatible with?\u003c\/strong\u003e The 232310 dual function control is designed for inboard, stern drive, and outboard engine setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 232310 control made of?\u003c\/strong\u003e It is constructed of sand cast brass with a chrome plated finish for a durable, corrosion-resistant marine housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sea-Dog 232310 mounted?\u003c\/strong\u003e It is a top-mount control installed with four #10 flat head fasteners; the fasteners are not included with the control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 232310 dual function control?\u003c\/strong\u003e The mounting footprint measures 8-1\/2 inches by 6-3\/8 inches by 5-1\/2 inches by 4-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 232310 engine control weigh?\u003c\/strong\u003e The Sea-Dog 232310 dual function engine control weighs 5.922 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the shift and throttle levers marked so they are easy to tell apart?\u003c\/strong\u003e Yes, the dual control uses black and red knobs on its two levers so the shift and throttle functions can be identified at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the knobs on the 232310 be replaced if they wear out?\u003c\/strong\u003e Yes, replacement knobs are sold separately from the dual function control housing itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 232310 meet any marine industry standards?\u003c\/strong\u003e Yes, the Sea-Dog dual function engine control meets ABYC engine control standard P-14.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sea-Dog 232310 control?\u003c\/strong\u003e The control housing with its dual shift and throttle levers ships as a single unit; mounting fasteners and the 2nd Control Kit for dual station use are not included and are sourced separately.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988553412827,"sku":"S-D-232310","price":306.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7816.jpg?v=1784422874"},{"product_id":"sea-dog-316-stainless-steel-3-spoke-15-1-2-in-marine-steering-wheel-with-integral-maneuvering-knob-3-4-in-standard-mount","title":"Sea-Dog Stainless Steel 3-Spoke Steering Wheel with Knob, 15-1\/2 Inch, 25 Degree Dish, Fits 3\/4 Inch Tapered Shafts","description":"\u003cp\u003eThis Sea-Dog steering wheel is a 15-1\/2 inch, 3-spoke boat steering wheel built from formed 304 stainless steel for corrosion resistance in the marine environment. It features a 25 degree dish angle for comfortable, ergonomic hand positioning at the helm, and it includes an integral knob mounted to the wheel. The knob lets the driver spin the wheel more quickly with one hand, which is useful in close-quarters maneuvering, docking, or other situations where a lot of fast wheel turning is needed. The wheel is sized to fit standard 3\/4 inch tapered steering shafts, the common bore size used on many boat steering systems, and it is constructed with a 3-spoke design rather than a 4 or 5-spoke layout. A matching stainless steel replacement cap is also produced for this wheel family. The stainless steel construction resists rust and saltwater corrosion better than chromed or painted alternatives, making it well suited to open helms and boats that see regular saltwater exposure. Overall the wheel weighs 3.88 pounds. This is a direct steering wheel replacement or upgrade for boats using a compatible 3\/4 inch tapered steering shaft and looking for a durable, low-maintenance stainless finish with the added convenience of a turning knob.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 230325\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Spokes:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 15-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Angle:\u003c\/strong\u003e 25 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Fit:\u003c\/strong\u003e 3\/4 inch tapered shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnob:\u003c\/strong\u003e Integral steering knob included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 5 each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStandard 3\/4 inch tapered steering shafts\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size steering shaft does the Sea-Dog 230325 fit?\u003c\/strong\u003e The Sea-Dog 230325 steering wheel fits standard 3\/4 inch tapered steering shafts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many spokes does this Sea-Dog steering wheel have?\u003c\/strong\u003e It has a 3-spoke design, part of the 3.88 pound Sea-Dog 230325 stainless steel wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the Sea-Dog 230325 steering wheel?\u003c\/strong\u003e This steering wheel measures 15-1\/2 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this steering wheel come with a knob?\u003c\/strong\u003e Yes, the Sea-Dog 230325 includes an integral knob attached to the wheel for faster one-handed turning during tight maneuvering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sea-Dog 230325 made from?\u003c\/strong\u003e It is constructed of formed 304 stainless steel, chosen for its resistance to marine corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this steering wheel weigh?\u003c\/strong\u003e The Sea-Dog 230325 weighs 3.88 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dish angle of this steering wheel?\u003c\/strong\u003e It has a 25 degree dish angle, which positions the wheel rim for a more comfortable driving posture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement cap available for this steering wheel?\u003c\/strong\u003e Yes, a matching stainless steel replacement cap is produced for the Sea-Dog 230325 wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill stainless steel hold up to saltwater exposure?\u003c\/strong\u003e The 304 stainless steel used in the Sea-Dog 230325 resists corrosion in saltwater and open-helm marine environments better than painted or plated finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the knob on the Sea-Dog 230325 removable?\u003c\/strong\u003e The knob is integral to the wheel, mounted directly to the Sea-Dog 230325 for turning assistance rather than being a separate attachment.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988553511131,"sku":"S-D-230325","price":256.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7810_8b384a04-e138-4caa-9fc1-c28e028b06ba.jpg?v=1784422885"},{"product_id":"seastar-pivot-30-series-steering-component-mpn-031029-upc-731957296719","title":"SeaStar 031029 Pivot 30 Series Steering Component","description":"\u003cp\u003eThe SeaStar 031029 Pivot 30 Series is a steering system component from SeaStar's Steering Parts \u0026amp; Accessories line. It is designed as a replacement or service part for boat owners maintaining or repairing their steering setup, identified by SeaStar part number 031029.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 031029\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Pivot 30 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts \u0026amp; Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957296719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is SeaStar part number 031029?\u003c\/strong\u003e SeaStar part number 031029 is a component in the Pivot 30 Series, part of SeaStar's Steering Parts \u0026amp; Accessories category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar 031029 weigh?\u003c\/strong\u003e The SeaStar 031029 Pivot 30 Series component weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar 031029?\u003c\/strong\u003e The UPC for the SeaStar 031029 Pivot 30 Series component is 731957296719.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar 031029 a genuine SeaStar part?\u003c\/strong\u003e Yes, part number 031029 is a genuine SeaStar branded component in the Pivot 30 Series line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does SeaStar 031029 fall under?\u003c\/strong\u003e SeaStar 031029 is classified under Steering Parts \u0026amp; Accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SeaStar 031029 come with installation hardware?\u003c\/strong\u003e Specific box contents for SeaStar part number 031029 are not specified; check the exact contents against your steering system's requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats or steering systems is the SeaStar 031029 compatible with?\u003c\/strong\u003e Specific compatibility details for SeaStar part number 031029 are not specified; confirm fitment with your steering system's documentation or part number before purchasing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar 031029 made from?\u003c\/strong\u003e Material composition for SeaStar part number 031029 is not specified.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989248848091,"sku":"TEL-031029","price":10.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-3300--33C-1-over-4-pin-by-9-over-64-Pivot-30-Series-031029__76386.1737877403.500.750.jpg?v=1785329139"},{"product_id":"seastar-pivot-30-series-marine-engine-control-cable-mpn-037691","title":"SeaStar Pivot 30 Series Control Cable Pivot Fitting, Part 037691","description":"\u003cp\u003eThe SeaStar Pivot 30 Series, part number 037691, is a pivot fitting for use with SeaStar 30 Series pleasure craft control cables. It provides the pivoting connection point where the control cable end attaches to the engine or steering component being actuated, allowing the cable to articulate smoothly through its range of motion as it is engaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 037691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pivot 30 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Pleasure Craft Control Cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957294630\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar Pivot 30 Series pivot fitting used for?\u003c\/strong\u003e Part 037691 is a pivot fitting used with SeaStar 30 Series pleasure craft control cables, providing the pivoting connection point at the cable end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this pivot fitting?\u003c\/strong\u003e The part number is 037691, and it is sold under the name Pivot 30 Series by SeaStar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this pivot fitting weigh?\u003c\/strong\u003e The SeaStar Pivot 30 Series (part 037691) weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pivot fitting compatible with all control cables?\u003c\/strong\u003e It is designed for use with SeaStar 30 Series control cables specifically, based on its product name and category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does part 037691 fall under?\u003c\/strong\u003e It is listed under Pleasure Craft Control Cables, reflecting its use on boat control cable systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar Pivot 30 Series a genuine SeaStar part?\u003c\/strong\u003e Yes, part number 037691 is a genuine SeaStar component sold under the SeaStar brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the SeaStar Pivot 30 Series, part 037691, is 731957294630.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Pivot 30 Series include mounting hardware?\u003c\/strong\u003e Available details for part 037691 do not specify included hardware beyond the pivot fitting itself.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989248880859,"sku":"TEL-037691","price":11.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/037691__54396.1737880767.500.750.jpg?v=1785329142"},{"product_id":"seastar-039471-pivot-30-series-universal-3300-33c-control-cable-connection-pivot","title":"SeaStar Pivot 30 Series Cable Connection Pivot, 039471, Fits 3300\/33C Cables","description":"\u003cp\u003eThe SeaStar Pivot 30 Series is a cable connection pivot used to join a steering cable to the engine or outdrive tilt tube connector on boats using 3300\/33C series steering cable. The pivot allows the steering cable end to articulate smoothly as the cable moves through its arc, reducing binding and wear at the connection point. It is a universal cable connection pivot, meaning it is designed to work across applications that use the 3300\/33C cable series rather than being limited to a single engine or drive model.\u003c\/p\u003e\u003cp\u003eFinished in grey, the pivot ships as a single component (1 item per package) and is compact and lightweight, making it an easy, low-cost replacement part to keep on hand or install during routine steering cable service. Because it is a wear item at a pivoting connection, replacing the pivot along with the steering cable helps ensure smooth, play-free steering feel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 039471\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pivot 30 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Compatibility:\u003c\/strong\u003e Universal cable connection pivot for 3300\/33C series steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 8.62 x 5.71 x 0.59 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar 039471 pivot used for?\u003c\/strong\u003e The SeaStar 039471 is a cable connection pivot that joins a steering cable end to the engine or outdrive connector, letting the cable articulate as it moves through its steering arc.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable series does the 039471 pivot fit?\u003c\/strong\u003e It is a universal cable connection pivot designed for 3300\/33C series steering cable rather than a single specific engine model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SeaStar Pivot 30 Series?\u003c\/strong\u003e It is finished in grey.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pivots come in one package?\u003c\/strong\u003e One SeaStar Pivot 30 Series pivot (part number 039471) is included per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of part 039471?\u003c\/strong\u003e The packaged SeaStar Pivot 30 Series measures 8.62 x 5.71 x 0.59 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 039471 pivot weigh?\u003c\/strong\u003e The SeaStar Pivot 30 Series pivot weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar 039471 a genuine SeaStar part?\u003c\/strong\u003e Yes, part number 039471 is the SeaStar Pivot 30 Series cable connection pivot, sold under the SeaStar brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should the steering cable pivot be replaced?\u003c\/strong\u003e Since the pivot is a wear item at a moving connection point, it is commonly replaced along with the steering cable during routine steering system service to keep the cable articulating smoothly without binding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 039471 pivot include mounting hardware?\u003c\/strong\u003e The package includes the Pivot 30 Series pivot itself as the included component; no additional hardware is listed with part number 039471.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar Pivot 30 Series a universal fit part?\u003c\/strong\u003e Yes, it is described as a universal cable connection pivot for 3300\/33C series cable rather than being restricted to one specific application.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989249044699,"sku":"TEL-039471","price":15.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-3300--33C-5-over-16-Pin-x-7-over-16-Pivot-30-Series-039471__73518.1737839440.500.750.jpg?v=1785188001"},{"product_id":"dometic-seastar-039890-pivot-for-30-series-control-cables","title":"SeaStar Pivot 30 Series Steering Cable Pivot, Part Number 039890","description":"\u003cp\u003eThe SeaStar Pivot 30 Series (part number 039890) is a steering cable pivot fitting used with SeaStar hydraulic and mechanical steering systems on boats. The pivot connects the steering cable to the outboard or sterndrive steering arm, allowing the cable to articulate smoothly through its full range of motion as the helm is turned. It is designed as a direct-fit replacement or spare component for the 30 Series steering cable line, making it a straightforward part to keep on hand for steering system maintenance or repair.\u003c\/p\u003e\u003cp\u003eEach unit ships as a single pivot fitting (one item per package) and is manufactured by Teleflex under the SeaStar brand, a name with a long history of supplying steering components to boat builders, dealers, and boaters. The pivot is compact and lightweight, sized to match the 30 Series cable family, and is backed by SeaStar Solutions' two-year recreational user warranty against manufacturer defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 039890\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Pivot 30 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Teleflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 0.75 x 4 x 5.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 5.13 x 4 x 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturer defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits the SeaStar 30 Series steering cable line.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar Pivot 30 Series used for?\u003c\/strong\u003e Part number 039890 is a steering cable pivot fitting that connects a SeaStar 30 Series steering cable to the boat's steering arm, allowing the cable to articulate as the helm turns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pivot fit all SeaStar steering cables?\u003c\/strong\u003e This pivot, part number 039890, is designed for the SeaStar 30 Series steering cable line specifically, not other SeaStar cable series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pivots come in one package?\u003c\/strong\u003e One pivot fitting is included per package for part number 039890.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SeaStar 039890 pivot?\u003c\/strong\u003e The item measures 0.75 x 4 x 5.12 inches (L x W x H), and it ships in packaging measuring 5.13 x 4 x 0.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar Pivot 30 Series weigh?\u003c\/strong\u003e It weighs 0.01 pounds, reflecting the small, lightweight design of this steering cable pivot fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures part number 039890?\u003c\/strong\u003e Teleflex manufactures this pivot under the SeaStar brand name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar 039890 pivot covered by a warranty?\u003c\/strong\u003e Yes, it is backed by a two-year recreational user warranty against manufacturer defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine SeaStar part or an aftermarket copy?\u003c\/strong\u003e Part number 039890 is a genuine SeaStar component from Teleflex, not a third-party aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the pivot on my steering cable?\u003c\/strong\u003e A steering cable pivot like the SeaStar 039890 should be replaced if it becomes worn, cracked, or causes stiff or notchy steering feel at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part 039890?\u003c\/strong\u003e The order includes one SeaStar Pivot 30 Series fitting, part number 039890.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989249110235,"sku":"TEL-039890","price":42.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-3300--33C-1-over-4-Pin-x-5-over-16-Pivot-30-Series-039890__90552.1729786566.500.750.jpg?v=1785188164"},{"product_id":"seastar-035232-004-black-ball-knob-for-marine-engine-control-levers","title":"SeaStar Knob Black 035232-004 Control Handle Replacement Knob","description":"\u003cp\u003eThe SeaStar 035232-004 is a black replacement knob for SeaStar boat control assemblies. It is a lightweight component designed to attach to a control lever or shift handle, giving the operator a secure, comfortable grip point on the control. As a genuine SeaStar part, it is built to match the fit and finish of the original equipment it replaces, making it a straightforward swap when an existing knob is worn, cracked, or missing.\u003c\/p\u003e\u003cp\u003eThis knob is sold as a standalone accessory item within SeaStar's steering and control parts line, so it can be ordered on its own without needing to replace the entire control assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035232-004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 131957016513\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SeaStar 035232-004 knob?\u003c\/strong\u003e The SeaStar 035232-004 knob is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar 035232-004 weigh?\u003c\/strong\u003e The SeaStar 035232-004 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035232-004 a genuine SeaStar part?\u003c\/strong\u003e Yes, the 035232-004 is a genuine SeaStar branded knob, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 035232-004?\u003c\/strong\u003e Ordering 035232-004 gets you the black SeaStar knob itself as a standalone replacement component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 035232-004 knob be ordered separately from a full control assembly?\u003c\/strong\u003e Yes, the SeaStar 035232-004 is sold as an individual replacement knob and does not require purchasing an entire control assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace a knob like the SeaStar 035232-004?\u003c\/strong\u003e A control knob is typically replaced when it becomes worn, cracked, loose, or goes missing from the lever, and the 035232-004 provides a matching black replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes SeaStar part 035232-004 come in other colors?\u003c\/strong\u003e Part number 035232-004 is the black version of this SeaStar knob.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I identify the correct knob for my SeaStar control?\u003c\/strong\u003e Confirm the exact part number needed for your control before ordering, since SeaStar offers multiple knob part numbers; this listing is specifically for 035232-004.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the SeaStar 035232-004?\u003c\/strong\u003e The 035232-004 is listed within SeaStar's steering parts and control accessories, specifically as a control knob.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989249143003,"sku":"TEL-035232-004","price":8.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/035232-004__73623.1722504520.500.750.jpg?v=1785329141"},{"product_id":"seastar-031126-ball-joint-end-1-4-28-quick-release-for-universal-3300-33c-33c-marine-control-cables","title":"SeaStar Ball Joint 031126, 3300\/33C Series Quick Release, 1\/4-28 Thread","description":"\u003cp\u003eThe SeaStar 031126 is a quick release (QR) ball joint fitting designed for use with 3300\/33C series control cables on boats. It threads onto the cable end using a 1\/4-28 thread and provides a quick-release connection point where the cable attaches to a throttle, shift, or steering control arm. The quick release design lets the cable end be disconnected from the mounting stud without removing the retaining hardware, simplifying service and cable replacement.\u003c\/p\u003e\u003cp\u003eThis ball joint is a universal fitment part intended for the 3300\/33C control cable series used across a wide range of boat control cable installations. It is sold individually and identified by SeaStar part number 031126.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 031126\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Quick Release (QR) Ball Joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4-28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable Series:\u003c\/strong\u003e 3300\/33C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957291455\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for 3300\/33C series control cables\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat cable series does the SeaStar 031126 ball joint fit?\u003c\/strong\u003e The SeaStar 031126 is designed for the 3300\/33C series control cables, the common cable series used for boat throttle and shift controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does part number 031126 use?\u003c\/strong\u003e SeaStar 031126 uses a 1\/4-28 thread to attach to the end of the control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a quick release ball joint?\u003c\/strong\u003e Yes, the 031126 is a quick release (QR) style ball joint, allowing the cable end to be disconnected from the mounting stud without removing the retaining hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar 031126 ball joint weigh?\u003c\/strong\u003e It weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this ball joint fit a specific engine or boat model?\u003c\/strong\u003e SeaStar 031126 is a universal fitment part for the 3300\/33C cable series rather than a model-specific component, so it is not tied to a particular engine or boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SeaStar 031126 different from a non-quick-release ball joint?\u003c\/strong\u003e The 031126 uses a quick release design so the cable can be unhooked from the control arm stud for service without disassembling the mounting nut, unlike a standard fixed ball joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package with the 031126 ball joint?\u003c\/strong\u003e Part number 031126 is sold as a single quick release ball joint fitting for a 3300\/33C series control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 031126 ball joint made by SeaStar?\u003c\/strong\u003e Yes, 031126 is a genuine SeaStar part number for the 3300\/33C series quick release ball joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does this ball joint attach on a boat control system?\u003c\/strong\u003e The SeaStar 031126 ball joint attaches to the end of a 3300\/33C control cable and connects to the ball stud on a throttle or shift control arm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 031126 ball joint be replaced without cutting the cable?\u003c\/strong\u003e The 031126 threads onto the 1\/4-28 threaded end of a 3300\/33C cable, so it can be swapped by unthreading the old ball joint rather than cutting the cable.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989249175771,"sku":"TEL-031126","price":16.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/031126__24924.1737899620.500.750.jpg?v=1785188593"},{"product_id":"seastar-029104-universal-ball-joint-5-16-24-quick-release-qr-control-cable-connector","title":"SeaStar Ball Joint 029104 - 40 Series Cable Control, Quick Release, 5\/16-24 Thread","description":"\u003cp\u003eThe SeaStar 029104 is a quick release (QR) ball joint for 40 Series (6400\/64) cable connection kits, designed to attach a control cable to a steering or throttle\/shift lever. It uses a 5\/16-24 thread and features an external spring over the ball receptor, which is the identifying feature of the QR type versus the standard (ST) version. The kit comes complete with a nut and lockwasher for installation, and is built for use with one cable per joint.\u003c\/p\u003e\u003cp\u003eLength on this ball joint is measured from the center of the stud to the end of the barrel, which is the standard way SeaStar specifies cable connection hardware so it can be matched correctly to the cable and lever setup. This ball joint is a common wear and replacement item in cable-actuated marine steering and control systems, and is sized to work with SeaStar's 40 Series (6400\/64) cable line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 029104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Ball Joint (Cable Connection Kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 40 Series (6400\/64)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 5\/16-24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Quick Release (QR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Compatibility:\u003c\/strong\u003e For use with one cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.15 x 4 x 0.85 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Nut and lockwasher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar 029104 ball joint used for?\u003c\/strong\u003e The SeaStar 029104 is a ball joint used to connect a 40 Series (6400\/64) control cable to a steering or throttle\/shift lever, and it is built for use with one cable per joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 029104 ball joint a quick release type?\u003c\/strong\u003e Yes, the 029104 is the quick release (QR) version, which has an external spring over the ball receptor; the standard (ST) version of this ball joint does not have that spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the SeaStar 029104 use?\u003c\/strong\u003e The 029104 ball joint has a 5\/16-24 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 029104 ball joint come with mounting hardware?\u003c\/strong\u003e Yes, the SeaStar 029104 ball joint is complete with a nut and lockwasher.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the length of the 029104 ball joint measured?\u003c\/strong\u003e Length on the 029104 ball joint is measured from the center of the stud to the end of the barrel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SeaStar 029104?\u003c\/strong\u003e The 029104 ball joint measures 5.15 x 4 x 0.85 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 029104 ball joint weigh?\u003c\/strong\u003e The SeaStar 029104 weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich cable series is the 029104 ball joint designed for?\u003c\/strong\u003e This ball joint is designed for SeaStar's 40 Series (6400\/64) cable connection kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ball joints are included in part number 029104?\u003c\/strong\u003e Part number 029104 includes one ball joint, intended for use with one cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the QR and ST versions of this ball joint?\u003c\/strong\u003e The QR version, including the 029104, has an external spring over the ball receptor; the ST version does not have this external spring.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989249700059,"sku":"TEL-029104","price":28.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/TEL-029104__67763.1722502007.500.750.jpg?v=1785188335"},{"product_id":"seastar-300616-inboard-stand-off-tall-bracket-quick-connect-helm-converter-for-ssc62-qc-cables","title":"SeaStar 300616 Inboard Tall Bracket Quick-Connect Stand-off, Upgrades Rotary Helms for SSC62 QC Cables","description":"\u003cp\u003eThe SeaStar 300616 Inboard Tall Bracket is a Quick-Connect stand-off bracket built to upgrade older SeaStar Solutions rotary helms to a Quick-Connect cable interface. Installing this bracket lets an inboard steering system accept SSC62 QC cables, giving boat owners a straightforward path to modern quick-connect steering hardware without replacing the entire helm. It is designated the Tall Bracket version within the Inboard Stand-off Hookup lineup, distinguishing it from the Short Bracket 2 inch stand-off, which carries a different part number and is intended for installations requiring a shorter offset.\u003c\/p\u003e\u003cp\u003eThis bracket is intended for inboard hookup applications where a rotary helm needs to be converted to accept quick-connect cabling, simplifying future cable service and replacement. Because it is a stand-off bracket rather than a helm or cable itself, it is typically installed alongside the appropriate SSC62 quick-connect cable to complete the conversion.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 300616\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Inboard Tall Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Style:\u003c\/strong\u003e Stand-off, Tall Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHookup Type:\u003c\/strong\u003e Inboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Upgrades older SeaStar Solutions rotary helms to Quick-Connect cable interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable:\u003c\/strong\u003e SSC62 QC cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957292889\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Steering Parts \u0026amp; Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOlder SeaStar Solutions rotary helms being converted to a Quick-Connect cable interface\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSA27620P\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar 300616 Inboard Tall Bracket do?\u003c\/strong\u003e The SeaStar 300616 is a stand-off bracket that upgrades older SeaStar Solutions rotary helms to a Quick-Connect cable interface, allowing the use of SSC62 QC cables on an inboard steering setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the tall bracket or the short bracket?\u003c\/strong\u003e Part number 300616 is the Tall Bracket version of the Inboard Stand-off Hookup. A Short Bracket 2 inch version exists as a separate part number for installations that need a shorter offset, so confirm which length your boat requires before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 300616 bracket come with the SSC62 cable included?\u003c\/strong\u003e The 300616 is the stand-off bracket itself; it is designed to allow use of SSC62 QC cables, but the cable is ordered separately to complete the quick-connect conversion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat helms is the SeaStar 300616 bracket compatible with?\u003c\/strong\u003e This bracket is designed to upgrade older SeaStar Solutions rotary helms so they accept a Quick-Connect cable interface, making it suited to inboard rotary helm installations being converted to quick-connect hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar 300616 Tall Bracket weigh?\u003c\/strong\u003e The SeaStar Inboard Tall Bracket, part number 300616, weighs 1.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs SA27620P the same part as the SeaStar 300616?\u003c\/strong\u003e SA27620P is the OEM cross-reference number for the SeaStar 300616 Inboard Tall Bracket, so it identifies the same stand-off bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware is the 300616 bracket classified under?\u003c\/strong\u003e The SeaStar 300616 Inboard Tall Bracket falls under steering parts and accessories, specifically the inboard hookup stand-off bracket group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to convert my rotary helm to Quick-Connect?\u003c\/strong\u003e Converting to a Quick-Connect interface with the SeaStar 300616 bracket lets an older rotary helm accept SSC62 QC cables, simplifying future cable installation and replacement compared to non-quick-connect setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar 300616 an inboard or outboard part?\u003c\/strong\u003e The SeaStar 300616 Tall Bracket is designated for inboard hookup applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 300616 bracket be used with any QC cable?\u003c\/strong\u003e The SeaStar 300616 is specified for use with SSC62 QC cables as part of the rotary-helm-to-Quick-Connect upgrade.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989249831131,"sku":"TEL-300616","price":140.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/300616__06527.1722359285.500.750.jpg?v=1785329140"},{"product_id":"seastar-ca27208p-400a-low-hp-connection-kit-for-1973-1978-evinrude-johnson-outboards-35hp-and-under-omc-400-type-cables","title":"SeaStar CA27208P 400A Low HP Engine Connection Kit for Evinrude\/Johnson Outboards 35 HP and Less (1973-1978)","description":"\u003cp\u003eThe SeaStar CA27208P is a 400A Low HP engine connection kit built for Evinrude\/Johnson outboard engines of 35 horsepower and less, covering the 1973-1978 model years. It is engineered for use with OMC OEM \"400\" type control cables that have bare wire ends, giving the throttle and shift cables a secure, round male-to-male connection point at the engine. The kit includes throttle and shift adapters for one engine, so both control functions on a single powerhead can be connected with matching hardware.\u003c\/p\u003e\u003cp\u003eThe connectors use a 2-pin round design rated for 400 amps of maximum current, with a black vinyl\/plastic outer material for durability in a marine engine compartment. The kit is made in the United States. Because it is engine-specific, it is intended for Evinrude\/Johnson outboards of 35 HP and below within the stated model years; a separate kit (different part number) covers Evinrude\/Johnson outboards over 35 HP and OMC stern drives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CA27208P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Round (Male-to-Male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Marine Control Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Compatibility:\u003c\/strong\u003e OMC OEM \"400\" type cables with bare wire ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pins:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003c\/strong\u003e 400 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e Marine Engine Controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Throttle and shift adapters for one engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Material:\u003c\/strong\u003e Vinyl\/Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Shape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957085443\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude\/Johnson outboard engines, 35 HP and less, 1973-1978\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CA27208P fit?\u003c\/strong\u003e The CA27208P is built for Evinrude\/Johnson outboard engines of 35 horsepower and less, covering the 1973-1978 model years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of control cable does this kit work with?\u003c\/strong\u003e CA27208P is designed for OMC OEM \"400\" type control cables with bare wire ends, connecting the throttle and shift cables to the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many engines can one CA27208P kit connect?\u003c\/strong\u003e One kit includes throttle and shift adapters for a single engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CA27208P a round or flat connector?\u003c\/strong\u003e It uses a round, male-to-male, 2-pin connector design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat current rating does the CA27208P connector carry?\u003c\/strong\u003e The connector is rated for a maximum of 400 amps, which is reflected in the \"400A\" designation in its name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and material is the CA27208P?\u003c\/strong\u003e CA27208P is black with a vinyl\/plastic outer material and a round item shape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CA27208P connection kit weigh?\u003c\/strong\u003e The CA27208P weighs 0.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CA27208P manufactured?\u003c\/strong\u003e The CA27208P connection kit is made in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a different kit for higher horsepower Evinrude\/Johnson engines?\u003c\/strong\u003e Yes, Evinrude\/Johnson outboards over 35 HP and OMC stern drives use a different connection kit under a separate part number, so buyers should confirm horsepower before ordering CA27208P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar CA27208P?\u003c\/strong\u003e The UPC for the SeaStar CA27208P 400A Low HP Connection Kit is 731957085443.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CA27208P include the adapters needed for both throttle and shift?\u003c\/strong\u003e Yes, CA27208P includes both throttle and shift adapters for one engine in a single kit.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989249863899,"sku":"TEL-CA27208P","price":94.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51qslTJLRhL.jpg?v=1784474084"},{"product_id":"dometic-seastar-ca27024p-universal-inboard-connection-kit-for-3300-33c-control-cables","title":"SeaStar CA27024P Universal 3300\/33C Inboard Connection Kit","description":"\u003cp\u003eThe SeaStar CA27024P is a Universal 3300\/33C Inboard Connection Kit used to attach a 3300 or 33C series control cable to the inboard engine or transmission control arm. The kit provides the ball joint and bracket hardware needed to make a secure, pivoting cable-to-lever connection at the engine end of the cable run, which is the connection point most prone to wear from repeated throttle and shift movement.\u003c\/p\u003e\u003cp\u003eEach kit includes two CA37701P ball joints and two 031419 brackets, giving you the parts to complete connections on a dual-cable inboard setup (for example, separate throttle and shift cables, or a twin-engine installation). The ball joint threads onto the end of the 3300\/33C cable core and pivots inside the bracket, which mounts to the engine's control arm, allowing smooth motion transfer with minimal binding or play.\u003c\/p\u003e\u003cp\u003eThis is a universal-fit kit designed to work with SeaStar 3300 and 33C series control cables rather than a single specific engine model, making it a straightforward replacement or spare-parts kit for boat builders, dealers, and boat owners maintaining or upgrading inboard cable connections.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CA27024P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Universal 3300\/33C Inboard Connection Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e (2) CA37701P Ball Joints, (2) 031419 Brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Series Compatibility:\u003c\/strong\u003e 3300\/33C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957085771\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for SeaStar 3300 and 33C series inboard control cables; not limited to a single engine make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar CA27024P connection kit include?\u003c\/strong\u003e CA27024P includes two CA37701P ball joints and two 031419 brackets, enough hardware to complete two inboard cable connections at the engine end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cables does this kit fit?\u003c\/strong\u003e This kit is designed for SeaStar 3300 and 33C series control cables, and is a universal fit rather than being tied to one specific engine model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere on the boat does the CA27024P kit get installed?\u003c\/strong\u003e The ball joint and bracket assembly connects the inboard end of a 3300\/33C control cable to the engine or transmission control arm, transferring throttle or shift motion from the cable to the lever.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CA27024P kit weigh?\u003c\/strong\u003e The SeaStar CA27024P Inboard Connection Kit weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs one CA27024P kit enough for a dual-cable setup?\u003c\/strong\u003e Yes, because CA27024P includes two ball joints and two brackets, one kit provides the parts needed for both a throttle cable and a shift cable connection, or for a twin-engine pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 031419 used for in this kit?\u003c\/strong\u003e 031419 is the bracket component included in the CA27024P kit; it mounts to the engine control arm and holds the ball joint in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number CA37701P used for in this kit?\u003c\/strong\u003e CA37701P is the ball joint component of the CA27024P kit, threading onto the cable core end and pivoting within the 031419 bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CA27024P kit genuine SeaStar hardware?\u003c\/strong\u003e CA27024P is a genuine SeaStar-branded Universal 3300\/33C Inboard Connection Kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CA27024P kit fit a specific engine year or model?\u003c\/strong\u003e No, CA27024P is listed as a universal inboard connection kit for 3300\/33C series cables and is not restricted to a particular engine year or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CA27024P bracket be ordered separately if only one part is worn?\u003c\/strong\u003e The 031419 bracket and CA37701P ball joint are the individual components that make up the CA27024P kit, so a worn connection can be rebuilt using the same hardware included in this kit.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989249994971,"sku":"TEL-CA27024P","price":64.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61CfZgAfBtL.jpg?v=1784474087"},{"product_id":"seastar-ca27319p-engine-connection-kit-for-3300-33c-control-cables-mercury-outboard-1965-up-stern-drive","title":"SeaStar CA27319P Connection Kit for 3300\/33C Control Cables - Mercury Outboard \u0026 Stern Drive Engine End Adapter","description":"\u003cp\u003eThe SeaStar CA27319P is an engine-end connection kit designed for use with 3300\/33C control cables on Mercury applications. When a 3300\/33C cable is used with controls that accept a cable with 10-32 threaded ends, this kit provides the required engine-end connection, allowing the cable to be installed as a drop-in replacement while using the existing connection components at the control end. The kit fits Mercury Outboard engines (1965-date) and Mercury Stern Drive engines (all), and includes throttle and shift adapters for one engine so both functions are covered in a single package.\u003c\/p\u003e\u003cp\u003eConstruction is durable plastic, and the kit uses a DIN connector type at the engine-side interface. It ships individually packaged and is intended to be paired directly with 3300\/33C-series control cables rather than with Mercury 3600-type cables, which use a different engine-end connection and do not require this kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CA27319P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable Type:\u003c\/strong\u003e 3300\/33C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercury Outboard (1965-date) and Mercury Stern Drive (all)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Compatibility:\u003c\/strong\u003e Controls accepting a cable with 10-32 threaded ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e DIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Throttle and shift adapters for one engine (3600\/3300 Adapter Kit, Merc O\/B \u0026amp; I\/O)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6 inches L x 5 inches W x 1 inch H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter:\u003c\/strong\u003e 0.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957084637\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury Outboard, 1965-date, used with 3300\/33C control cables\u003c\/li\u003e\n\u003cli\u003eMercury Stern Drive (all), used with 3300\/33C control cables\u003c\/li\u003e\n\u003cli\u003eControls with 10-32 threaded cable ends (Mercury Sport Jet applications)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CA27319P used for?\u003c\/strong\u003e CA27319P is an engine-end connection kit that lets a 3300\/33C control cable be installed on Mercury engines, providing the adapter hardware needed at the engine side of the cable run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes CA27319P fit Mercury outboards and stern drives?\u003c\/strong\u003e Yes, this connection kit is intended for Mercury Outboard engines (1965-date) and Mercury Stern Drive engines (all).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need CA27319P with every Mercury control cable?\u003c\/strong\u003e No. It is required for 3300\/33C control cables on applicable Mercury engines, but a Mercury 3600 type cable uses a different engine-end connection and does not require the CA27319 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat controls is this kit compatible with?\u003c\/strong\u003e CA27319P is used where the control accepts a cable with 10-32 threaded ends, as found on applicable Mercury Sport Jet control setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does CA27319P use?\u003c\/strong\u003e The CA27319P connection kit uses a DIN connector type at the engine-side interface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the CA27319P kit?\u003c\/strong\u003e The kit includes throttle and shift adapters for one engine, covering both functions in a single package (packaged as the 3600\/3300 Adapter Kit, Merc O\/B \u0026amp; I\/O).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CA27319P kit weigh?\u003c\/strong\u003e The CA27319P connection kit weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of CA27319P?\u003c\/strong\u003e CA27319P ships in a package measuring 6 inches long by 5 inches wide by 1 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CA27319P kit made of?\u003c\/strong\u003e CA27319P is constructed of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CA27319P a drop-in replacement part?\u003c\/strong\u003e CA27319P works alongside a 3300\/33C cable to allow a drop-in cable replacement at the engine end, using existing connection components at the control end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many engines does one CA27319P kit cover?\u003c\/strong\u003e One CA27319P kit includes throttle and shift adapters for a single engine; a second kit is needed for a second engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the CA27319P connection kit?\u003c\/strong\u003e The UPC for the SeaStar CA27319P connection kit is 731957084637.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989250027739,"sku":"TEL-CA27319P","price":29.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81D8DMeT2pL.jpg?v=1784474088"},{"product_id":"seastar-ca27320p-control-cable-adapter-kit-for-omc-stern-drives-3400-3300-33c-cables","title":"SeaStar Solutions CA27320P Cable Adapter Kit for OMC Turbo Jet 3300\/33C Throttle Control Cable","description":"\u003cp\u003eThe SeaStar Solutions CA27320P is a cable adapter kit engineered to complete the connection between a 3300\/33C series control cable and an OMC Turbo Jet throttle control cable setup. When rigging an OMC Turbo Jet engine with a CC230XX series cable, this adapter kit is the required hardware that bridges the cable end to the engine's throttle control linkage, ensuring a secure, correctly matched connection. It is built from aluminum with a white finish for corrosion resistance in marine environments, including saltwater use.\u003c\/p\u003e\u003cp\u003eThis kit is specific to the throttle control cable side of an OMC Turbo Jet installation; it is not used on the gate control cable side of that system. If your rigging uses a CC205XX (479 type) cable instead, this adapter kit is not required for that configuration. Always confirm your cable series and engine application before ordering to make sure CA27320P is the correct adapter for your setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar Solutions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CA27320P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Application:\u003c\/strong\u003e OMC Turbo Jet (throttle control cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable Series:\u003c\/strong\u003e 3400\/3300 (33C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957084903\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOMC Turbo Jet engines using a CC230XX (3300\/33C series) throttle control cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed for this part\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CA27320P adapter kit used for?\u003c\/strong\u003e CA27320P is a cable adapter kit that completes the connection between a 3300\/33C series control cable and an OMC Turbo Jet engine's throttle control cable linkage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes CA27320P work with the gate control cable on an OMC Turbo Jet?\u003c\/strong\u003e No, CA27320P is specified for the throttle control cable side of an OMC Turbo Jet installation, not the gate control cable side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable series does this adapter kit require?\u003c\/strong\u003e This kit is designed for use with CC230XX series (3300\/33C type) control cables on OMC Turbo Jet applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need this adapter kit if I am using a CC205XX cable?\u003c\/strong\u003e If your OMC Turbo Jet throttle control setup uses a CC205XX (479 type) cable instead of a CC230XX cable, the CA27320P adapter kit is not required for that configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CA27320P adapter kit weigh?\u003c\/strong\u003e The CA27320P cable adapter kit weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CA27320P adapter kit made from?\u003c\/strong\u003e CA27320P is made from aluminum and finished in white for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CA27320P suitable for saltwater use?\u003c\/strong\u003e Yes, CA27320P is recommended for use in salt water environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CA27320P a genuine SeaStar Solutions part?\u003c\/strong\u003e Yes, CA27320P is a genuine SeaStar Solutions cable adapter kit, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there any OEM cross-reference numbers for CA27320P?\u003c\/strong\u003e No OEM cross-reference or replacement numbers are listed for the CA27320P adapter kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the CA27320P kit?\u003c\/strong\u003e The CA27320P kit includes the adapter hardware needed to connect a 3300\/33C series cable to an OMC Turbo Jet throttle control linkage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill CA27320P fit any OMC engine?\u003c\/strong\u003e CA27320P is specified for OMC Turbo Jet engines using a CC230XX (3300\/33C series) throttle control cable, not OMC engines generally.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989250093275,"sku":"TEL-CA27320P","price":24.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71X58UCs8ML.jpg?v=1784474094"},{"product_id":"seastar-ca27247p-control-cable-connection-kit-for-evinrude-johnson-outboards-over-35hp-omc-stern-drives-1973-1978-omc-400-type-cables","title":"SeaStar CA27247P Engine Connection Kit for Evinrude\/Johnson Outboard (Over 35 HP) and OMC Stern Drive","description":"\u003cp\u003eThe SeaStar CA27247P is an engine-specific connection kit designed to join OMC \"400\" type control cables with bare wire ends to the engine. It is built for two applications: Evinrude\/Johnson outboard engines over 35 HP, and OMC stern drive installations (all). The kit provides the hardware needed to make a secure, engine-side connection for 3300\/33C series control cables, giving boat owners a reliable way to complete a throttle or shift cable installation without splicing or improvising a connector.\u003c\/p\u003e\u003cp\u003eA mounting clip is included with the kit, but it is intended for outboard use only; the clip is not used when the kit is installed on a stern drive. Buyers working on a stern drive application should note this so they are not left looking for a missing part - it is simply not needed for that installation. The kit is finished in black and is sized as a compact connector assembly rather than a full cable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CA27247P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Control Cable Connection Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable Type:\u003c\/strong\u003e OMC \"400\" type control cables with bare wire ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment - Evinrude\/Johnson Outboard:\u003c\/strong\u003e Over 35 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment - OMC Stern Drive:\u003c\/strong\u003e All\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable Series:\u003c\/strong\u003e 3300\/33C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Clip:\u003c\/strong\u003e Not used on stern drive installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 1.7 cm L x 12.1 cm W x 14 cm H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957085023\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude\/Johnson outboard engines over 35 HP\u003c\/li\u003e\n\u003cli\u003eOMC stern drive installations (all)\u003c\/li\u003e\n\u003cli\u003eFor OMC \"400\" type control cables with bare wire ends, 1973-1978\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CA27247P used for?\u003c\/strong\u003e The CA27247P is an engine-specific connection kit that joins OMC \"400\" type control cables with bare wire ends to the engine, used on Evinrude\/Johnson outboards over 35 HP and on OMC stern drive installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CA27247P fit a smaller outboard under 35 HP?\u003c\/strong\u003e No, the CA27247P is built for Evinrude\/Johnson outboards over 35 HP; outboards of 35 HP or less use the CA27208P kit instead, so check your engine's horsepower before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work on stern drives?\u003c\/strong\u003e Yes, the CA27247P is the correct connection kit for OMC stern drive installations (all models), in addition to its outboard application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the mounting clip used on every installation?\u003c\/strong\u003e The mounting clip included with the CA27247P kit is not used on stern drive installations - it applies to the outboard application only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of cable does the CA27247P connect?\u003c\/strong\u003e It connects OMC \"400\" type control cables with bare wire ends, compatible with the 3300\/33C cable series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CA27247P weigh?\u003c\/strong\u003e The CA27247P connection kit weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CA27247P kit?\u003c\/strong\u003e The kit is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat years of OMC cables does the CA27247P cover?\u003c\/strong\u003e The CA27247P is designed for OMC \"400\" type cables from the 1973-1978 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between CA27247P and CA27208P?\u003c\/strong\u003e CA27247P is for Evinrude\/Johnson outboards over 35 HP and OMC stern drives, while CA27208P is the equivalent kit for Evinrude\/Johnson outboards of 35 HP or less - they are different SKUs for different horsepower ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CA27247P a genuine SeaStar part?\u003c\/strong\u003e Yes, CA27247P is the genuine SeaStar manufacturer part number for this engine-specific cable connection kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the CA27247P kit?\u003c\/strong\u003e The CA27247P kit has package dimensions of 1.7 cm L x 12.1 cm W x 14 cm H.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989250126043,"sku":"TEL-CA27247P","price":33.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41sfC2jYuLL.jpg?v=1784474094"},{"product_id":"seastar-ca28014p-ball-joint-for-4300-43-universal-control-cables-1-4-28-thread-st-type","title":"SeaStar Ball Joint for 4300\/43 Series Control Cables, ST Type, 1\/4-28 Thread, CA28014P","description":"\u003cp\u003eThe SeaStar CA28014P is a universal ball joint fitting designed for use with 4300\/43 series control cables, the type used in marine steering, throttle, and shift cable runs. It is the ST (standard) type ball joint, distinct from the quick-release (QR) style joint that SeaStar also offers for the same cable series as a separate part. The joint uses a 1\/4-28 thread and attaches to the cable end where the control cable connects to the engine, outboard bracket, or helm-side lever, transferring the pushed and pulled motion of the cable core into mechanical movement at the connection point.\u003c\/p\u003e\u003cp\u003eAt just 0.07 pounds, this is a small, precision-machined hardware component rather than a full cable assembly, intended as a replacement or spare part for boat owners and technicians servicing existing 4300\/43 series control cable installations. Because it is a universal fitting rather than a make- or model-specific part, it is compatible with any application using the 4300\/43 series cable and ST-type ball joint configuration rather than being limited to a single engine brand or boat model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CA28014P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e ST (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable Series:\u003c\/strong\u003e 4300\/43\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/4-28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957085290\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 ball joint\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fitment for 4300\/43 series control cables; not limited to a specific engine make, horsepower, or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat cable series does the SeaStar CA28014P ball joint fit?\u003c\/strong\u003e The CA28014P is built for 4300\/43 series control cables and is a universal fitting for that cable series rather than being tied to one engine make or boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CA28014P the standard or quick-release ball joint?\u003c\/strong\u003e CA28014P is the ST (standard) type ball joint. A separate quick-release (QR) type ball joint is also available for the same 4300\/43 cable series under a different part number for buyers who want tool-free disconnection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this ball joint use?\u003c\/strong\u003e The SeaStar CA28014P uses a 1\/4-28 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CA28014P ball joint weigh?\u003c\/strong\u003e It weighs 0.07 pounds, reflecting that this is a small individual hardware fitting rather than a full cable assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ball joints are included when I order CA28014P?\u003c\/strong\u003e One CA28014P ball joint is included per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill CA28014P work with any boat or engine?\u003c\/strong\u003e Because CA28014P is a universal ball joint for the 4300\/43 cable series, it fits any application using that cable series and the ST-type joint, regardless of engine brand or boat model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar CA28014P ball joint?\u003c\/strong\u003e The UPC for CA28014P is 731957085290.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CA28014P a genuine SeaStar part?\u003c\/strong\u003e Yes, CA28014P is a genuine SeaStar manufacturer part number, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the ST and QR versions of this ball joint?\u003c\/strong\u003e The ST type, which CA28014P is, is the standard fixed ball joint, while the QR version is a quick-release design sold as a separate part number for the same 4300\/43 cable series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes CA28014P come with mounting hardware?\u003c\/strong\u003e CA28014P is supplied as the ball joint fitting itself; no additional included components are specified beyond the single joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications typically use the 4300\/43 series ball joint like CA28014P?\u003c\/strong\u003e The 4300\/43 series control cable and its CA28014P ST-type ball joint are commonly used in marine steering, throttle, and shift cable connections.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989250650331,"sku":"TEL-CA28014P","price":33.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-CA28014P-4300--43-Control-Cable-Ball-Joint__63913.1737844134.500.750.jpg?v=1785188110"},{"product_id":"seastar-ca27321p-3400-3300-33c-control-cable-adapter-kit-johnson-evinrude-omc-volvo-applications","title":"SeaStar CA27321P Cable Adapter Kit for Johnson\/Evinrude\/OMC Outboards, Pre-1979","description":"\u003cp\u003eThe SeaStar CA27321P is a control cable adapter kit built to connect 3300\/33C-type control cables to Johnson\/Evinrude\/OMC outboard motors produced prior to 1979. It is designed as an engine-specific connection solution, allowing a 3300\/33C control cable to terminate correctly at the pre-1979 OMC engine end fitting where an original or updated cable does not otherwise match the powerhead connection. The kit is constructed from a combination of metal and plastic components sized to form a secure, corrosion-resistant terminal connection between cable and engine.\u003c\/p\u003e\u003cp\u003eThis is a compact, single-count kit intended for technicians and boat owners replacing or adapting steering or throttle\/shift control cables on older OMC outboard setups. Because SeaStar also offers a related adapter kit under the separate part number CA27320P, it is important to order the CA27321P specifically to match your cable and engine pairing rather than substituting the sibling SKU.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CA27321P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Control Cable Adapter Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Adapting Johnson\/Evinrude\/OMC outboard motors to 3300\/33C control cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable Type:\u003c\/strong\u003e 3300\/33C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e OMC pre-1979\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal, Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 15.24 cm L x 11.176 cm W x 1.27 cm H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957084736\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude\/OMC outboard motors, pre-1979\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CA27321P adapter kit fit?\u003c\/strong\u003e The CA27321P is designed for Johnson\/Evinrude\/OMC outboard motors built prior to 1979.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CA27321P compatible with 3300\/33C control cables?\u003c\/strong\u003e Yes, this adapter kit is built to connect 3300\/33C-type control cables to compatible OMC outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CA27321P made of?\u003c\/strong\u003e It is constructed of metal and plastic components for a secure terminal connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CA27321P weigh?\u003c\/strong\u003e The SeaStar CA27321P weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the CA27321P kit?\u003c\/strong\u003e The package measures 15.24 cm L x 11.176 cm W x 1.27 cm H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CA27321P manufactured?\u003c\/strong\u003e The CA27321P adapter kit is manufactured in China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CA27321P the same as the CA27320P kit?\u003c\/strong\u003e No, CA27321P and CA27320P are separate part numbers; order the CA27321P specifically to match your engine and cable pairing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the CA27321P kit?\u003c\/strong\u003e The CA27321P is sold as a single kit, package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CA27321P a genuine SeaStar part?\u003c\/strong\u003e Yes, CA27321P is the genuine SeaStar manufacturer part number for this adapter kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the CA27321P adapter kit?\u003c\/strong\u003e The UPC for the SeaStar CA27321P is 731957084736.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989251895515,"sku":"TEL-CA27321P","price":33.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71G6ZC9dAsL.jpg?v=1784474149"},{"product_id":"seastar-039110-pivot-for-40-series-marine-steering-systems","title":"SeaStar Pivot, 40 Series, Part 039110","description":"\u003cp\u003eThe SeaStar Pivot, 40 Series (part number 039110) is a replacement pivot fitting for SeaStar hydraulic steering systems, designed to connect the steering cable to the outboard or sterndrive tiller arm. As a genuine SeaStar solutions component, it is built to the same fit and function standard as the original equipment used across the 40 Series steering line, giving boat owners a straightforward way to restore proper cable articulation without replacing the entire steering assembly. The pivot ships as a single-piece unit and is sized to match SeaStar's 40 Series hardware package, making it a direct swap for a worn, seized, or damaged pivot on an existing installation.\u003c\/p\u003e\u003cp\u003ePackage dimensions are 5.13 x 4 x 0.25 inches and the unit weighs 0.01 pounds, reflecting its compact, single-component design. It carries the SeaStar solutions two-year recreational user warranty against manufacturer defects, backed by Teleflex, a long-standing manufacturer in the recreational marine steering and control industry.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 039110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e Pivot 40 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Dimensions (L x W x H):\u003c\/strong\u003e 5.13 x 4 x 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957259080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e PleasureCraft Control Cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturer defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for SeaStar 40 Series steering systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar Pivot, 40 Series (part 039110) used for?\u003c\/strong\u003e Part 039110 is a pivot fitting used in SeaStar 40 Series steering systems to connect and articulate the steering cable at the tiller arm or steering cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 039110 a genuine SeaStar component?\u003c\/strong\u003e Yes, the 039110 pivot is a genuine SeaStar solutions part, manufactured by Teleflex, and is covered by the SeaStar two-year recreational user warranty against manufacturer defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 039110 pivot?\u003c\/strong\u003e The SeaStar Pivot, 40 Series ships in packaging measuring 5.13 x 4 x 0.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar 039110 pivot weigh?\u003c\/strong\u003e The 039110 pivot weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pivots are included when ordering part 039110?\u003c\/strong\u003e One pivot unit is included per order of SeaStar part 039110, as indicated by the Number of Items value of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar Pivot, 40 Series compatible with other SeaStar steering series, like a 20 or 30 Series system?\u003c\/strong\u003e This pivot, part 039110, is specified as belonging to the 40 Series steering line; compatibility with other series is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 039110 pivot come with mounting hardware included?\u003c\/strong\u003e The included components for part 039110 consist of the Pivot 40 Series unit itself; no additional hardware is listed as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the SeaStar 039110 pivot?\u003c\/strong\u003e The SeaStar Pivot, 40 Series carries UPC 731957259080.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures the SeaStar 039110 pivot?\u003c\/strong\u003e Teleflex manufactures the SeaStar Pivot, 40 Series, part number 039110, under the SeaStar solutions brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to the SeaStar Pivot, 40 Series?\u003c\/strong\u003e A two-year recreational user warranty against manufacturer defects covers the SeaStar 039110 pivot.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989273096411,"sku":"TEL-039110","price":12.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_dc100456-49e3-48ff-8832-c945f04afb1e.jpg?v=1785332801"},{"product_id":"dometic-seastar-031539-steering-cable-pivot-30-series-universal-connection-for-3300-33c-control-cables","title":"SeaStar Pivot 30 Series, 031539, Universal Cable Connection Pivot for 3300\/33C Control Cables","description":"\u003cp\u003eThe SeaStar Pivot 30 Series (part number 031539) is a cable connection pivot designed to join 3300\/33C series control cables to steering or throttle\/shift components on a boat. It provides a universal connection point, allowing the cable end to pivot freely at the linkage for smooth, consistent motion transfer without binding. This is a small but essential hardware component in control cable installations, replacements, and rigging jobs where a 3300\/33C cable needs to be connected at a pivot point rather than a fixed connection.\u003c\/p\u003e\u003cp\u003eThe pivot is finished in gold and is sold as a single item, making it easy to order the exact quantity needed for a job, whether that is a single replacement or several units across a multi-cable rigging setup. Its compact dimensions and light weight mean it adds minimal bulk to the cable end connection while maintaining the durability expected from SeaStar control cable hardware.\u003c\/p\u003e\u003cp\u003eThis pivot is intended for use with 3300 series and 33C series control cables and is a straightforward drop-in hardware piece for technicians and boat owners performing steering or control cable maintenance, upgrades, or full cable replacements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 031539\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pivot 30 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cable Series:\u003c\/strong\u003e 3300\/33C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Universal cable connection pivot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Dimensions:\u003c\/strong\u003e 5.12 x 4.69 x 1.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar Pivot 30 Series 031539 used for?\u003c\/strong\u003e The SeaStar Pivot 30 Series, part number 031539, is a cable connection pivot used to connect a 3300\/33C series control cable to a steering or throttle\/shift linkage at a pivoting attachment point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich control cables is part number 031539 compatible with?\u003c\/strong\u003e It is designed for 3300 series and 33C series control cables, described as a universal cable connection pivot for that cable family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pivots come in one order of 031539?\u003c\/strong\u003e Each order includes 1 pivot unit, so buyers needing multiple connection points should order accordingly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SeaStar 031539 pivot?\u003c\/strong\u003e The 031539 pivot has a gold finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar Pivot 30 Series weigh?\u003c\/strong\u003e The 031539 pivot weighs 0.02 pounds, making it a lightweight hardware component for cable end connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 031539 pivot?\u003c\/strong\u003e The item package dimensions for the SeaStar Pivot 30 Series 031539 are 5.12 x 4.69 x 1.1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 031539 pivot a genuine SeaStar part?\u003c\/strong\u003e Yes, part number 031539 is a genuine SeaStar Pivot 30 Series component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 031539 pivot fit both steering and throttle\/shift cables?\u003c\/strong\u003e It is a universal cable connection pivot for 3300\/33C cables, so it can be used at pivot connection points on control cables in that series, whether used in a steering or throttle\/shift application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the SeaStar 031539 pivot?\u003c\/strong\u003e The order includes the Pivot 30 Series component itself, sold as a single item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SeaStar 031539 pivot easy to install?\u003c\/strong\u003e The Pivot 30 Series is a simple connection hardware piece designed to attach at the cable end pivot point, making it straightforward to install during control cable replacement or rigging work.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989273293019,"sku":"TEL-031539","price":13.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SeaStar-3300--33C-Cable-Pivot-30-Series-031539__73141.1737863106.500.750.jpg?v=1785189089"},{"product_id":"seastar-031419-cable-clip-assembly-30-series-universal-3300-33c-inboard-control-cable-connection-bracket","title":"SeaStar Cable Clip Assembly 031419, 30 Series, for 3300\/33C Inboard Cable Connection","description":"\u003cp\u003eThe SeaStar Cable Clip Assy 30 Series, part number 031419, is a cable connection bracket used to secure a 3300\/33C series inboard steering cable at its connection point. Cataloged as the Univ. 3300\/33C Inboard Connection Bracket, it is designed specifically for use with 30 Series cable ends and functions as the cable clip component of the inboard connection assembly. This same bracket is also supplied as one of the components inside the Univ. 3300\/33C Inboard Connection Kit, which pairs two of these brackets with two ball joints for a complete connection set. The clip is molded in silver plastic for corrosion resistance in a marine environment and is a self-adhesive installation type, allowing it to be fitted directly at the cable connection point without additional hardware. It is intended for boat builders, dealers, and boat owners replacing or servicing steering cable connections on inboard applications using 3300\/33C series cables. Because this bracket is marked for 30 Series use specifically, it should not be substituted for connection hardware intended for other cable series. Order part number 031419 to get the correct 30 Series inboard connection bracket for your steering cable setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 031419\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cable Clip Assy 30 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Series Compatibility:\u003c\/strong\u003e Universal 3300\/33C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable End Type:\u003c\/strong\u003e 30 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Self-Adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957247032\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal 3300\/33C series inboard steering cable connections using 30 Series cable ends\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 031419 used for?\u003c\/strong\u003e Part number 031419 is a cable clip assembly, cataloged as the Univ. 3300\/33C Inboard Connection Bracket, used to secure a 30 Series cable end at the inboard connection point of a 3300\/33C series steering cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 031419 fit any steering cable, or only a specific series?\u003c\/strong\u003e This bracket is designed for the 30 Series cable end specifically, within the Universal 3300\/33C cable line, so it should be matched to that connection type rather than used as a generic fit-all clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 031419 cable clip made from?\u003c\/strong\u003e The 031419 Cable Clip Assy 30 Series is made from silver-colored plastic, chosen for its resistance to corrosion in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar 031419 cable clip weigh?\u003c\/strong\u003e The SeaStar Cable Clip Assy 30 Series, part 031419, weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 031419 clip installed?\u003c\/strong\u003e It is a self-adhesive installation type, meaning it is designed to be affixed directly at the cable connection point without needing separate mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 031419 sold as a single piece or in a kit?\u003c\/strong\u003e Part number 031419 is sold individually as one bracket, and it is also one of two brackets included as a component inside the Univ. 3300\/33C Inboard Connection Kit, which additionally includes two ball joints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 031419 and the Univ. 3300\/33C Inboard Connection Kit?\u003c\/strong\u003e The 031419 is a single Cable Clip Assy 30 Series bracket, while the connection kit is a larger assembly that bundles two of these brackets together with two ball joints for a complete inboard connection set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat quantity comes in one package of 031419?\u003c\/strong\u003e One package of the SeaStar Cable Clip Assy 30 Series, part 031419, contains a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 031419 clip include ball joints?\u003c\/strong\u003e No, part 031419 is the cable clip bracket itself; the ball joints are a separate component (CA37701P) included only in the full Univ. 3300\/33C Inboard Connection Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the SeaStar 031419 cable clip?\u003c\/strong\u003e The 031419 Cable Clip Assy 30 Series is silver in color.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989273555163,"sku":"TEL-031419","price":25.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/tel-031419_large__95376.1729781924.500.750.jpg?v=1785188266"},{"product_id":"seastar-035232-001-red-control-knob-for-mjb-ch2500p-marine-engine-controls","title":"SeaStar Control Knob 035232-001, Red, Metal","description":"\u003cp\u003eThis is the SeaStar Control Knob, part number 035232-001, finished in red. It is a metal replacement knob designed to attach to a SeaStar boat control lever, giving the operator a secure, comfortable grip point for shifting or throttle actuation. The knob is compact and lightweight, built as a single-piece component with no additional accessories included beyond the knob itself.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 035232-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 0.15 x 2 x 5.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 9.92 x 5.39 x 3.23 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957251244\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar 035232-001 knob used for?\u003c\/strong\u003e Part number 035232-001 is a control knob that attaches to a SeaStar boat control lever, giving the operator a grip point for shift or throttle actuation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this knob?\u003c\/strong\u003e The 035232-001 knob is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SeaStar 035232-001 knob made from?\u003c\/strong\u003e It is made of metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 035232-001 control knob weigh?\u003c\/strong\u003e It weighs 0.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the SeaStar control knob?\u003c\/strong\u003e The knob itself measures 0.15 x 2 x 5.12 inches; the packaged item measures 9.92 x 5.39 x 3.23 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 035232-001 knob a genuine SeaStar part?\u003c\/strong\u003e Yes, part number 035232-001 is a genuine SeaStar branded control knob.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many knobs are included with part number 035232-001?\u003c\/strong\u003e One knob is included; no additional hardware or accessories ship with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes SeaStar offer this knob in another color?\u003c\/strong\u003e SeaStar also offers a ball knob finished in black under a different part number, so buyers who prefer black should order that alternative rather than the red 035232-001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the style of the SeaStar 035232-001 knob?\u003c\/strong\u003e It is listed as a Classic style knob.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar 035232-001 red control knob?\u003c\/strong\u003e The UPC is 731957251244.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989273751771,"sku":"TEL-035232-001","price":10.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/035232-001__70356.1722492817.500.750.jpg?v=1785188595"},{"product_id":"seastar-pivot-30-series-control-cable-fitting-mpn-032392-for-pleasurecraft-30-series-cables","title":"SeaStar Pivot 30 Series Control Cable Pivot, Part Number 032392","description":"\u003cp\u003eThe SeaStar Pivot 30 Series is a control cable pivot component, part number 032392, engineered for use within SeaStar's PleasureCraft control cable systems. As a pivot component it is designed to be installed at the connection point of a control cable run, allowing the cable end to articulate smoothly as the helm or engine control is operated. It carries the SeaStar name, the brand behind PleasureCraft-line steering and control cable hardware, and is identified for ordering and inventory purposes by UPC 731957253293.\u003c\/p\u003e\u003cp\u003eThis is a compact, lightweight component at just 0.01 pounds, consistent with a small pivot fitting rather than a full cable assembly. Buyers replacing or servicing a Pivot 30 Series control cable setup can use part number 032392 to identify and order the correct pivot component for their system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 032392\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pivot 30 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e PleasureCraft Control Cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957253293\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar Pivot 30 Series, part number 032392?\u003c\/strong\u003e It is a control cable pivot component from SeaStar's PleasureCraft Control Cables line, identified by part number 032392 and UPC 731957253293.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Pivot 30 Series pivot weigh?\u003c\/strong\u003e SeaStar part number 032392 weighs 0.01 pounds, reflecting its small size as a pivot fitting rather than a full cable assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is part number 032392?\u003c\/strong\u003e Part number 032392 is listed under SeaStar's PleasureCraft Control Cables category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 032392 a genuine SeaStar part?\u003c\/strong\u003e Yes, part number 032392, named Pivot 30 Series, is a SeaStar branded component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is used to identify the Pivot 30 Series pivot?\u003c\/strong\u003e The Pivot 30 Series pivot, SeaStar part number 032392, is identified by UPC 731957253293.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Pivot 30 Series pivot include mounting hardware?\u003c\/strong\u003e Available details for SeaStar part number 032392 do not specify included mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the function of a control cable pivot like part 032392?\u003c\/strong\u003e A control cable pivot such as the SeaStar Pivot 30 Series (part number 032392) sits at a cable connection point to allow the cable end to articulate as the control is operated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I order the correct replacement pivot for a Pivot 30 Series system?\u003c\/strong\u003e Reference SeaStar part number 032392 or UPC 731957253293 when ordering to ensure you receive the correct Pivot 30 Series pivot component.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989273915611,"sku":"TEL-032392","price":12.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_13caddd4-a0d5-41dc-a969-a4954d8fde8e.jpg?v=1785332798"},{"product_id":"seastar-cc17006-400-series-control-cable-6-ft-fits-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar Control Cable CC17006, 6 Feet, Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17006 is a 6-foot OEM direct-replacement type control cable engineered for Pre-1979 OMC\/Johnson\/Evinrude outboard engines equipped with BRP\/OMC controls. Built by SeaStar to drop into the existing connection components on the control head, this cable is designed as a straightforward swap for the original equipment cable without modification.\u003c\/p\u003e\u003cp\u003eConstruction features stainless steel terminals and brass fittings for corrosion resistance, paired with stainless or nylon-covered core wires and moisture protective seals that guard against water intrusion over the cable's life. The core runs through a long-wearing HDPE liner that is ultra-smooth and lubricated for life, reducing steering and throttle effort at the helm. A black HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil, while an 8-inch minimum bend radius keeps the cable protected from kinking during routing and installation.\u003c\/p\u003e\u003cp\u003eSeaStar states that this cable exceeds the engine manufacturer's specifications and that its control cables exceed ABYC safety standards and meet ISO\/IMCI\/NMMA certification requirements. The cable is lubricated at the factory for life and is made in the U.S.A.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE, Nylon, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e Black HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cable Strands:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.91 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Exceeds ABYC safety standards; meets ISO\/IMCI\/NMMA certification requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC17006 control cable fit?\u003c\/strong\u003e The CC17006 is built for Pre-1979 OMC\/Johnson\/Evinrude outboard engines that use BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17006 control cable?\u003c\/strong\u003e This cable measures 6 feet, and buyers should verify this is the correct length for their control head to engine run before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17006 an OEM part or a replacement cable?\u003c\/strong\u003e CC17006 is an OEM direct-replacement type cable made by SeaStar, designed to use the existing connection components on Pre-1979 OMC\/Johnson\/Evinrude control heads without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in this control cable?\u003c\/strong\u003e Construction includes stainless steel terminals, brass fittings, a stainless or nylon-covered core wire, an HDPE inner liner, and a black HDPE outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17006 come pre-lubricated?\u003c\/strong\u003e Yes, the CC17006 is lubricated at the factory for life, and its HDPE liner is ultra-smooth to reduce steering and throttle effort.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for installing this cable?\u003c\/strong\u003e The CC17006 has an 8-inch minimum bend radius, which should be respected when routing the cable to avoid kinking or binding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17006 weigh?\u003c\/strong\u003e The CC17006 control cable weighs 0.91 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable resistant to marine environmental exposure?\u003c\/strong\u003e The black HDPE outer jacket on the CC17006 resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17006 meet any marine safety certifications?\u003c\/strong\u003e SeaStar states that this control cable exceeds ABYC safety standards and meets ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the CC17006?\u003c\/strong\u003e The CC17006 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17006 control cable made?\u003c\/strong\u003e The CC17006 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CC17006 be used with engines from other years or control types?\u003c\/strong\u003e The CC17006 is specified for Pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls; other engine years or control types require a different cable.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989275160795,"sku":"TEL-CC17006","price":50.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71I8MMRD0nL.jpg?v=1784474787"},{"product_id":"seastar-cc17008-400-series-control-cable-8-ft-fits-pre-1979-omc-johnson-evinrude-gale-with-brp-omc-controls","title":"SeaStar CC17008 Control Cable, 8-Feet, Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17008 is an 8-foot OEM direct-replacement type control cable engineered for pre-1979 OMC\/Johnson\/Evinrude outboards equipped with BRP\/OMC controls. It drops in using the existing connection components at the control head, so no modification to the control box or engine-side fitting is needed. The cable is built with stainless steel terminals and conduit fittings, paired with stainless or nylon covered core wires and moisture protective seals, giving the internal wire added corrosion resistance and a longer service life in a marine environment. A durable black HDPE outer jacket resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil, with an 8 inch minimum bend radius for routing through tight engine compartments. The cable is lifetime lubricated at the factory, so it runs smooth from installation without additional greasing. It exceeds the engine manufacturer's specifications and is manufactured in the U.S.A. Because control cable connections are proprietary to the control head design, confirm your boat uses BRP\/OMC controls and verify the correct cable length for your application before ordering, since a cable that is too long or too short will not route or actuate properly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal and Fitting Material:\u003c\/strong\u003e Stainless steel terminals and conduit fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire Covering:\u003c\/strong\u003e Stainless or nylon covered core wires with moisture protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed for this part number.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and engines does the SeaStar CC17008 fit?\u003c\/strong\u003e The CC17008 is designed for pre-1979 OMC, Johnson, and Evinrude outboards that use BRP\/OMC style controls, using the existing connection components at the control head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e The CC17008 is an 8-foot control cable, so measure your existing cable or the routing distance from control head to engine before ordering to confirm this length is correct for your application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cable work with Mercury or Mariner controls?\u003c\/strong\u003e No. The CC17008 is built for BRP\/OMC style controls on pre-1979 OMC\/Johnson\/Evinrude engines; Mercury and Mariner control heads use a different proprietary connection and require a different SeaStar cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e A black HDPE (high-density polyethylene) outer jacket covers the CC17008, giving it resistance to abrasion, UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the terminals corrosion resistant?\u003c\/strong\u003e Yes, the CC17008 uses stainless steel terminals and conduit fittings along with stainless or nylon covered core wires and moisture protective seals for added corrosion protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cable come pre-lubricated?\u003c\/strong\u003e The CC17008 is lifetime lubricated at the factory, so it is ready to install and run smoothly without adding grease during setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for installation?\u003c\/strong\u003e An 8 inch minimum bend radius applies to the CC17008, which should be accounted for when routing the cable through the engine compartment and control run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM part or an aftermarket replacement?\u003c\/strong\u003e The CC17008 is an OEM direct-replacement type cable manufactured by SeaStar, engineered to use the same connection components as the original equipment cable it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires are in this control cable?\u003c\/strong\u003e The CC17008 has 2 core wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this control cable weigh?\u003c\/strong\u003e The CC17008 weighs 1.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17008 manufactured?\u003c\/strong\u003e This control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable meet marine industry standards?\u003c\/strong\u003e Cables in this SeaStar control cable line are environmentally tested for marine applications and exceed the engine manufacturer's specifications.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989275717851,"sku":"TEL-CC17008","price":50.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61LkrgSSvKL.jpg?v=1784474798"},{"product_id":"seastar-cc17007-400-series-marine-control-cable-7-ft-fits-mercury-mariner-force-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar Control Cable CC17007, 7-Foot 400 Type, Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17007 is a 400 type control cable engineered as a drop-in replacement for pre-1979 OMC, Johnson, and Evinrude outboards equipped with BRP\/OMC control heads. It uses the existing connection components at both the helm and engine, so no modification to the control head is required. The cable measures 7 feet and is built with stainless steel terminals and fittings, along with stainless or nylon covered core wires, all protected by moisture seals to resist corrosion. The outer jacket is a durable HDPE material that withstands abrasion, UV exposure, salt water, chemicals, gasoline, and oil, and the cable carries an 8 inch minimum bend radius. Every SeaStar control cable is lubricated for life at the factory, environmentally tested for marine use, and manufactured to exceed the engine manufacturer's specifications. It also meets ABYC safety standards and ISO\/IMCI\/NMMA certification requirements. Before ordering, confirm the CC17007 is the correct length and connection type for your specific control head, as control cables are not interchangeable across brands or connector styles.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 400 type (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless or nylon covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Exceeds ABYC safety standards; meets ISO\/IMCI\/NMMA certification requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePre-1979 OMC\/Johnson\/Evinrude outboards with BRP\/OMC controls.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo specific OEM cross-reference numbers are listed for this part; it is designed as a direct-fit replacement control cable for the fitment above.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar CC17007 fit?\u003c\/strong\u003e The CC17007 is a 400 type control cable made for pre-1979 OMC, Johnson, and Evinrude outboards that use BRP\/OMC control heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e The CC17007 measures 7 feet, and buyers should confirm this length matches their existing cable run before ordering since control cables are not adjustable after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17007 a genuine OEM part or aftermarket?\u003c\/strong\u003e It is a SeaStar branded, OEM direct-replacement type cable built to use the same connection components as the original equipment cable it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CC17007 has a black HDPE outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the terminals and core wire?\u003c\/strong\u003e Stainless steel terminals and fittings are used on the CC17007, with a stainless or nylon covered core wire and moisture protective seals for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17007 come pre-lubricated?\u003c\/strong\u003e Yes, SeaStar control cables including the CC17007 are lubricated for life at the factory, so no additional greasing is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e The CC17007 has an 8 inch minimum bend radius, which should be maintained when routing the cable to avoid kinking or binding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable meet any safety standards?\u003c\/strong\u003e The CC17007 exceeds ABYC safety standards and meets ISO\/IMCI\/NMMA certification requirements for marine control cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17007 covered by a warranty?\u003c\/strong\u003e SeaStar backs the CC17007 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CC17007 be used with Mercury or Mariner controls?\u003c\/strong\u003e No, the CC17007 is specified for pre-1979 OMC\/Johnson\/Evinrude applications with BRP\/OMC controls; different SeaStar cable numbers cover Mercury and Mariner control setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17007 weigh?\u003c\/strong\u003e The CC17007 control cable weighs 1.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17007 manufactured?\u003c\/strong\u003e The CC17007 is made in the U.S.A. By SeaStar.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989276209371,"sku":"TEL-CC17007","price":51.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL.jpg?v=1784474806"},{"product_id":"seastar-cc17010-400-series-10-ft-control-cable-for-1993-date-mercury-mariner-force-and-pre-1979-omc-johnson-evinrude","title":"SeaStar CC17010 400 Series Control Cable, 10 Feet, for Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17010 is a 400 Series standard-type control cable engineered as a direct, OEM-style replacement for pre-1979 OMC, Johnson, and Evinrude outboard engines equipped with BRP\/OMC control heads. Measuring 10 feet in length, it uses the existing connection components at the control head, so installation follows the same routing and attachment points as the original cable it replaces.\u003c\/p\u003e\u003cp\u003eConstruction features stainless steel terminals and conduit fittings paired with stainless or nylon-covered core wires and moisture protective seals, giving the cable added resistance to corrosion at the connection points. The core wire runs inside a long-wearing HDPE liner that is ultra smooth and lubricated for life, supporting an 8-inch minimum bend radius during installation. The black HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil, making it suited to the marine environment.\u003c\/p\u003e\u003cp\u003eEach cable is environmentally tested for marine applications and is built to exceed the engine manufacturer's specifications. It is made in the U.S.A. And is lifetime lubricated at the factory. Before ordering, verify that 10 feet is the correct cable length for your specific control run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e 400 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless or nylon-covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Controls:\u003c\/strong\u003e BRP\/OMC controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957020888\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude outboard engines with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC17010 control cable fit?\u003c\/strong\u003e The CC17010 is designed for pre-1979 OMC, Johnson, and Evinrude outboard engines equipped with BRP\/OMC control heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e The SeaStar CC17010 is 10 feet in length, part of the 400 Series standard cable line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cable connect to my existing control head without modification?\u003c\/strong\u003e Yes, the CC17010 is a drop-in replacement engineered to use the existing connection components on pre-1979 OMC\/Johnson\/Evinrude control heads with BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CC17010 has a black HDPE outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the terminals and core wire?\u003c\/strong\u003e Stainless steel terminals and conduit fittings are used along with stainless or nylon-covered core wires and moisture protective seals for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SeaStar CC17010 come pre-lubricated?\u003c\/strong\u003e Yes, this cable is lifetime lubricated at the factory, and the HDPE liner is ultra smooth for reduced friction over the life of the cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17010 weigh?\u003c\/strong\u003e The SeaStar CC17010 control cable weighs 1.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for installation?\u003c\/strong\u003e The CC17010 has an 8-inch minimum bend radius, which should be respected when routing the cable during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable made to a higher standard than the original equipment cable?\u003c\/strong\u003e The CC17010 is built to exceed the engine manufacturer's specifications and is environmentally tested for marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar CC17010 manufactured?\u003c\/strong\u003e This control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if 10 feet is the right length for my boat?\u003c\/strong\u003e Measure your existing control cable run before ordering the CC17010, since control cables must match the application length for proper operation; the 10-foot length will not work if a different length is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17010 replace both throttle and shift cables?\u003c\/strong\u003e The CC17010 is a single 400 Series control cable assembly for use with BRP\/OMC control heads on pre-1979 OMC\/Johnson\/Evinrude engines; check your control head setup to confirm the correct cable for throttle or shift function.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989277061339,"sku":"TEL-CC17010","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_47d65b02-fe0a-483f-964a-c58b6469f9b6.jpg?v=1784474814"},{"product_id":"seastar-cc17009-control-cable-assembly-400-series-9-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar CC17009 Control Cable, 400 Series, 9 Feet - Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17009 is a 400 Series control cable assembly built as a direct-replacement type cable for engines using a BRP\/OMC control head connection, specifically pre-1979 OMC, Johnson, and Evinrude outboards with BRP\/OMC controls. It is engineered as a drop-in replacement that uses the existing connection components at both the control head and the engine, so no modification to the control station is required. The cable measures 9 feet in length.\u003c\/p\u003e\u003cp\u003eConstruction centers on stainless steel terminals and brass fittings for corrosion resistance, paired with stainless or nylon-covered core wires that carry moisture-protective seals to guard against water intrusion over the life of the cable. The 2-wire, single-strand core runs inside a long-wearing HDPE liner that is lubricated for life, reducing friction and the need for future maintenance. The outer jacket is black HDPE, chosen to resist abrasion and stand up to UV exposure, salt water, chemicals, gasoline, and oil, and the cable has an 8 inch minimum bend radius for routing through tight engine compartments. Each cable is environmentally tested for marine use and is stated to exceed the engine manufacturer's specifications, meeting ABYC safety standards and ISO\/IMCI\/NMMA certification requirements. The CC17009 is made in the U.S.A. And backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 400 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 9 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal (core wire)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE (High-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cable Strands:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.54 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957010117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 3001.0403\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo specific OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC17009 control cable fit?\u003c\/strong\u003e The CC17009 is designed for pre-1979 OMC, Johnson, and Evinrude outboard engines that use BRP\/OMC controls. It is a drop-in replacement that connects using the existing control head hardware, so no other fitment changes are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17009 control cable?\u003c\/strong\u003e This 400 Series cable is 9 feet long. Before ordering, measure your existing cable to confirm 9 feet is the correct length for your control station and engine layout, since control cables are not adjustable after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e The SeaStar CC17009 has an 8 inch minimum bend radius, which should be factored into how tightly the cable is routed through the engine compartment and helm to avoid kinking or premature wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17009 use the same connection as my original cable?\u003c\/strong\u003e Yes, the CC17009 is built as a direct-replacement type cable that uses the existing connection components at the BRP\/OMC control head and engine, so it is intended to install in place of the original cable without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC17009 made of?\u003c\/strong\u003e The cable core uses stainless steel terminals and brass fittings with stainless or nylon-covered core wires under moisture-protective seals, all housed in a black HDPE outer jacket and liner for abrasion and UV resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17009 pre-lubricated, or do I need to grease it before installation?\u003c\/strong\u003e The CC17009's liner is lubricated for life at the factory, so it does not require additional grease before or during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires are in the CC17009 cable?\u003c\/strong\u003e This control cable has 2 wires in a single-strand core configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC17009 hold up in saltwater use?\u003c\/strong\u003e The CC17009 is environmentally tested for marine applications, and its HDPE jacket and stainless\/nylon-covered core wires with moisture-protective seals are built to resist salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar CC17009 manufactured?\u003c\/strong\u003e The CC17009 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC17009?\u003c\/strong\u003e SeaStar backs the CC17009 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17009 meet marine safety standards?\u003c\/strong\u003e The CC17009 is stated to exceed the engine manufacturer's specifications and meets ABYC safety standards along with ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the CC17009?\u003c\/strong\u003e Ordering the CC17009 gets you the complete 400 Series, 9 foot control cable assembly, ready to connect to your existing BRP\/OMC control head and engine hardware.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989277290715,"sku":"TEL-CC17009","price":51.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_0f06d8d3-d0e7-4758-b1f9-f9b6047806c4.jpg?v=1784474821"},{"product_id":"seastar-cc17011-400-series-control-cable-11-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar CC17011 400 Series Control Cable, 11 Feet, for Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17011 is an 11-foot, 400 Series control cable engineered as a direct drop-in replacement for the original equipment cable on pre-1979 OMC, Johnson, and Evinrude outboards equipped with BRP\/OMC control heads. It uses the existing connection components at the control head and engine end, so no modification is needed to install it in place of the worn factory cable. The cable is built with stainless steel terminals and brass fittings for corrosion resistance, along with stainless or nylon covered core wires protected by moisture seals, extending service life in salt water and humid marine environments. A black HDPE outer jacket resists abrasion and withstands prolonged exposure to UV, salt water, chemicals, gasoline, and oil, while the smooth HDPE liner is lubricated for life at the factory to keep shifting and throttle response consistent. The cable has an 8-inch minimum bend radius, which should be respected during routing and installation to avoid kinking the core wire or liner. Every SeaStar control cable is environmentally tested for marine use and exceeds the engine manufacturer's specifications, and is backed by a two-year recreational user warranty against manufacturing defects. This cable is made in the U.S.A. Before ordering, confirm that 11 feet is the correct length for your boat's control-to-engine run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 400 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 11 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless or nylon covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude outboards with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDirect drop-in replacement using existing OEM connection components; no specific OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CC17011 control cable used for?\u003c\/strong\u003e The CC17011 is an 11-foot, 400 Series control cable used to operate shift and throttle functions on pre-1979 OMC, Johnson, and Evinrude outboards equipped with BRP\/OMC control heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC17011 fit a 1985 Evinrude with BRP controls?\u003c\/strong\u003e No. The CC17011 is designed specifically for pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls, so a later-model engine outside that range is not the intended application for this cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e The SeaStar CC17011 measures 11 feet, matching the length designation in its part number, and this is the length you should verify against your boat's control-to-engine run before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17011 a genuine SeaStar part or aftermarket?\u003c\/strong\u003e It is a genuine SeaStar 400 Series control cable, designed as an OEM direct-replacement type cable that uses the existing connection components at the control head and engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e A black HDPE outer jacket covers the CC17011, which resists abrasion and withstands prolonged exposure to UV, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17011 come pre-lubricated?\u003c\/strong\u003e Yes, the CC17011's HDPE liner is lubricated for life at the factory, so no additional lubrication is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e 8 inches is the minimum bend radius for the CC17011; routing it tighter than that can damage the core wire or liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17011 weigh?\u003c\/strong\u003e The SeaStar CC17011 weighs 1.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the CC17011 myself?\u003c\/strong\u003e Yes, the CC17011 is built as a drop-in replacement that uses the existing OEM connection components, so it installs in place of the worn factory cable without modification, though correct length verification before ordering is essential.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC17011?\u003c\/strong\u003e SeaStar backs the CC17011 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17011 manufactured?\u003c\/strong\u003e The SeaStar CC17011 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat core wire type does the CC17011 use?\u003c\/strong\u003e The CC17011 uses stainless or nylon covered core wires with moisture protective seals for added corrosion protection and longer service life.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989278175451,"sku":"TEL-CC17011","price":53.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_ed6e48ae-238f-4508-b17b-d58dcc9ffae8.jpg?v=1784474838"},{"product_id":"seastar-cc17012-400-series-control-cable-12-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar 400 Series Control Cable CC17012, 12 Feet, for Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17012 is a 400 Series control cable assembly built as an OEM direct-replacement type cable for pre-1979 OMC, Johnson, and Evinrude outboard engines fitted with BRP\/OMC controls. It measures 12 feet and uses the existing connection components of the original equipment, so it drops in without modifying the control head or engine end fittings.\u003c\/p\u003e\u003cp\u003eThe cable is built with stainless steel terminals and conduit fittings for corrosion resistance, along with stainless or nylon covered core wires that include moisture protective seals to guard against water intrusion. A black HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil. The cable carries 2 wires and 1 strand configuration, has an 8 inch minimum bend radius, and is lubricated for life at the factory, so no additional lubrication is needed during installation. It is manufactured to exceed the engine manufacturer's specifications and is environmentally tested for marine applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 12 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e 400 Series (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Control Cable Assembly, 400 Series, 12'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE (High-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire Covering:\u003c\/strong\u003e Stainless or nylon covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cable Strands:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.41 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957017956\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo specific OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the CC17012 control cable fit?\u003c\/strong\u003e The SeaStar CC17012 is built for pre-1979 OMC, Johnson, and Evinrude outboard engines equipped with BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e This 400 Series cable, part number CC17012, measures 12 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine OEM cable or an aftermarket part?\u003c\/strong\u003e The CC17012 is an OEM direct-replacement type cable, meaning it is engineered to replace the original equipment cable using the existing connection components rather than being a genuine OEM-branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable's outer jacket made of?\u003c\/strong\u003e A black HDPE (high-density polyethylene) outer jacket covers the CC17012, resisting abrasion and withstanding UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17012 need to be lubricated before installation?\u003c\/strong\u003e No, this control cable is lubricated for life at the factory, so it does not require additional lubrication during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used for the terminals and core wires?\u003c\/strong\u003e Stainless steel terminals and conduit fittings are used, along with stainless or nylon covered core wires that include moisture protective seals for corrosion protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires does this control cable have?\u003c\/strong\u003e The CC17012 has 2 wires and a single cable strand configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e An 8 inch minimum bend radius applies to the CC17012 control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17012 control cable weigh?\u003c\/strong\u003e This control cable weighs 1.41 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cable work with control heads other than OMC\/Johnson\/Evinrude?\u003c\/strong\u003e The CC17012 is designed specifically for pre-1979 OMC, Johnson, and Evinrude engines with BRP\/OMC controls, so compatibility outside that fitment is not confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the CC17012?\u003c\/strong\u003e The package includes one Control Cable Assembly, 400 Series, 12 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable meet marine safety standards?\u003c\/strong\u003e The CC17012 is environmentally tested for marine applications and is manufactured to exceed the engine manufacturer's specifications.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989278372059,"sku":"TEL-CC17012","price":54.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_4a6e6a6f-520a-4bfb-ad70-7d7d5324a897.jpg?v=1784474852"},{"product_id":"seastar-cc17013-400-series-control-cable-13-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar CC17013 Control Cable, 13 Feet, for Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17013 is a 13-foot control cable assembly built as an OEM direct-replacement type cable for pre-1979 OMC\/Johnson\/Evinrude outboards equipped with BRP\/OMC controls. It uses the existing connection components at the control head and engine end, so installation follows the same hookup as the original cable it replaces.\u003c\/p\u003e\u003cp\u003eThe cable is built with stainless steel terminals and brass fittings for corrosion resistance, and the core wires are stainless or nylon covered with moisture protective seals to guard against water intrusion along the length of the cable. A durable black HDPE outer jacket resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. The liner inside the jacket is ultra smooth and lubricated for life, and the cable has an 8 inch minimum bend radius for routing through tight engine compartments.\u003c\/p\u003e\u003cp\u003eEvery SeaStar control cable is environmentally tested for marine use and is manufactured to exceed the engine manufacturer's specifications, meeting ABYC safety standards and ISO\/IMCI\/NMMA certification requirements. The CC17013 is made in the U.S.A. And is backed by a two-year recreational user warranty against manufacturing defects. Before ordering, confirm that 13 feet is the correct cable length for your control head and engine layout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17013\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Control Cable Assembly, 400 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire Material:\u003c\/strong\u003e Stainless steel or nylon covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.49 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude outboards with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC17013 control cable fit?\u003c\/strong\u003e The CC17013 is designed for pre-1979 OMC, Johnson, and Evinrude outboards that use BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17013 control cable?\u003c\/strong\u003e This control cable measures 13 feet in length, which is part of the 400 Series control cable assembly line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17013 an OEM part or a replacement cable?\u003c\/strong\u003e It is an OEM direct-replacement type cable, engineered to work with the existing connection components on pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls rather than being the original manufacturer's own branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e The SeaStar CC17013 has an 8 inch minimum bend radius, which should be respected when routing the cable through the engine compartment to avoid kinking or damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials make up the CC17013 control cable?\u003c\/strong\u003e The cable uses a black HDPE outer jacket, stainless steel terminals, brass fittings, and stainless or nylon covered core wires with moisture protective seals for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17013 come pre-lubricated?\u003c\/strong\u003e Yes, the cable's liner is lubricated for life at the factory, so no additional lubrication is needed before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC17013 hold up in saltwater environments?\u003c\/strong\u003e The black HDPE outer jacket on this control cable resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the CC17013 control cable?\u003c\/strong\u003e The product is a complete 400 Series control cable assembly, 13 feet in length, ready to connect using the existing control head and engine hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17013 control cable manufactured?\u003c\/strong\u003e SeaStar manufactures the CC17013 control cable in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17013 meet marine safety standards?\u003c\/strong\u003e This control cable is manufactured to exceed the engine manufacturer's specifications and meets ABYC safety standards along with ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC17013?\u003c\/strong\u003e SeaStar backs the CC17013 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if 13 feet is the right cable length for my boat?\u003c\/strong\u003e Before ordering the CC17013, measure your existing control cable length at the boat to confirm 13 feet is correct for your control head and engine setup, since cable length is application-specific.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989278535899,"sku":"TEL-CC17013","price":55.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_dbc353c2-3f82-436e-a0f3-d9ee64a9436c.jpg?v=1784474857"},{"product_id":"seastar-cc17014-400-series-control-cable-14-ft-fits-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar 400 Series Control Cable CC17014, 14 Feet, Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17014 is a 14 foot, 400 Series control cable engineered as an OEM direct-replacement type cable for Pre-1979 OMC\/Johnson\/Evinrude engines equipped with BRP\/OMC controls. It is built to drop into the existing connection components at the engine and control head, so no modification is required during installation.\u003c\/p\u003e\u003cp\u003eConstruction features stainless steel terminals and brass conduit fittings for corrosion resistance, along with stainless or nylon covered core wires that include moisture protective seals for added protection against corrosion. The cable is finished with a black HDPE outer jacket that resists abrasion and withstands the effects of UV exposure, salt water, chemicals, gasoline, and oil. It has an 8 inch minimum bend radius and is lifetime lubricated at the factory for smooth, low-friction operation throughout its service life.\u003c\/p\u003e\u003cp\u003eThis control cable exceeds the engine manufacturer's specifications and is manufactured to exceed ABYC safety standards along with ISO\/IMCI\/NMMA certification requirements. It is made in the U.S.A. And is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 400 Series Control Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless steel or nylon-covered core wires with moisture protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.57 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957007551\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Exceeds ABYC safety standards and ISO\/IMCI\/NMMA certification requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC17014 control cable fit?\u003c\/strong\u003e The CC17014 is designed for Pre-1979 OMC\/Johnson\/Evinrude outboard engines equipped with BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17014 control cable?\u003c\/strong\u003e This cable measures 14 feet, which is part of the CC170XX 400 Series cable line and is reflected in the CC17014 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine drop-in replacement or a generic aftermarket cable?\u003c\/strong\u003e The CC17014 is an OEM direct-replacement type cable, meaning it uses the same connection components as the original equipment cable so it installs without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CC17014 has a black HDPE outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are the terminals and fittings made from?\u003c\/strong\u003e Stainless steel terminals and brass conduit fittings are used on the CC17014 for added corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17014 come pre-lubricated?\u003c\/strong\u003e Yes, the CC17014 is lifetime lubricated at the factory, so no additional lubrication is needed before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this control cable?\u003c\/strong\u003e The CC17014 has an 8 inch minimum bend radius, which should be respected when routing the cable to avoid kinking or damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17014 weigh?\u003c\/strong\u003e The CC17014 control cable weighs 1.57 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable meet marine safety standards?\u003c\/strong\u003e Yes, the CC17014 exceeds ABYC safety standards and meets ISO\/IMCI\/NMMA certification requirements, and it exceeds the engine manufacturer's specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17014 manufactured?\u003c\/strong\u003e The CC17014 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the SeaStar CC17014?\u003c\/strong\u003e SeaStar backs the CC17014 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC17014 work with modern fuel-injected outboards?\u003c\/strong\u003e The CC17014 is designed specifically for Pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls, so compatibility outside that fitment is not established for this part.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989282271451,"sku":"TEL-CC17014","price":56.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_7d4069dc-cd0b-4e68-b921-d1ed6c72d903.jpg?v=1784474870"},{"product_id":"seastar-cc17015-control-cable-400-series-15-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar Control Cable CC17015, 400 Series 15 Foot, Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17015 is a 15-foot, 400 Series OEM direct-replacement control cable engineered for Pre-1979 OMC\/Johnson\/Evinrude engines equipped with BRP\/OMC controls. It is designed as a drop-in replacement that uses the existing connection components on the control head, so no modification to the control box is required. The cable features stainless steel terminals and brass fittings for corrosion resistance, along with stainless or nylon covered core wires protected by moisture seals to further guard against corrosion and extend service life.\u003c\/p\u003e\u003cp\u003eA durable black HDPE outer jacket resists abrasion and withstands prolonged exposure to UV, salt water, chemicals, gasoline, and oil, making it suited to continuous marine use. The cable is lubricated for life at the factory and built with an 8 inch minimum bend radius for reliable routing in tight engine compartments. SeaStar control cables of this type exceed the engine manufacturer's specifications and are backed by a two-year recreational user warranty against manufacturing defects. This cable is manufactured in the U.S.A.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\/Type:\u003c\/strong\u003e 400 Series (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE (High-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless or nylon covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Controls:\u003c\/strong\u003e BRP\/OMC controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-year recreational user warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957021571\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the SeaStar CC17015 control cable designed for?\u003c\/strong\u003e The CC17015 is built for Pre-1979 OMC, Johnson, and Evinrude engines that use BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17015 control cable?\u003c\/strong\u003e This cable measures 15 feet, matching the length designation in its CC17015 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine OEM part or an aftermarket cable?\u003c\/strong\u003e The CC17015 is an OEM direct-replacement type cable from SeaStar, designed to use the existing connection components on the original control head rather than requiring modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e A black HDPE (high-density polyethylene) outer jacket covers the CC17015, giving it resistance to abrasion, UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17015 come pre-lubricated?\u003c\/strong\u003e Yes, the cable is lubricated for life at the factory, so no additional lubrication is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e The CC17015 has an 8 inch minimum bend radius, which should be respected when routing the cable through the engine compartment to avoid damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in the terminals and core wire?\u003c\/strong\u003e Stainless steel terminals and brass fittings are used for corrosion resistance, while the core wires are stainless or nylon covered with moisture protective seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC17015 work with Mercury or Mariner controls?\u003c\/strong\u003e No, this specific cable, the CC17015, is designated for Pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls, not Mercury or Mariner control systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC17015?\u003c\/strong\u003e SeaStar backs the CC17015 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17015 control cable manufactured?\u003c\/strong\u003e The CC17015 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17015 weigh?\u003c\/strong\u003e The CC17015 control cable weighs 1.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17015 meet marine safety standards?\u003c\/strong\u003e SeaStar control cables including the CC17015 exceed the engine manufacturer's specifications and are environmentally tested for marine applications.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989282402523,"sku":"TEL-CC17015","price":57.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_74b63ef5-bdee-4d21-a9a8-f28d25d6467a.jpg?v=1784474873"},{"product_id":"seastar-cc17017-400-series-control-cable-17-ft-fits-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar Control Cable CC17017, 17-Foot 400 Series, for Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17017 is a 17-foot, 400 Series control cable assembly built as an OEM direct-replacement type cable for pre-1979 OMC\/Johnson\/Evinrude engines equipped with BRP\/OMC controls. It is designed to connect directly to the existing OEM control head connection components, so no adapter or modification is needed at the helm or engine end.\u003c\/p\u003e\u003cp\u003eThe cable uses stainless steel terminals and brass fittings for corrosion resistance, with stainless or nylon covered core wires and moisture protective seals that guard against water intrusion along the length of the cable. The outer jacket is a durable black HDPE material that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil. The liner is long-wearing HDPE that is ultra smooth and lubed for life, and the entire cable is lubricated at the factory. The cable has a minimum bend radius of 8 inches, which should be respected during routing and installation to avoid binding or premature wear.\u003c\/p\u003e\u003cp\u003eEvery SeaStar control cable is environmentally tested for marine applications and is manufactured to exceed the engine manufacturer's specifications. Cables are built and tested to meet ABYC safety standards and ISO\/IMCI\/NMMA certification requirements, and are backed by a two-year recreational user warranty against manufacturing defects. Before ordering, verify that 17 feet is the correct cable length for your application, since control cables are sold by exact length and are not adjustable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Control Cable Assembly, 400 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel, Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE (High-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957003737\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the CC17017 control cable fit?\u003c\/strong\u003e The SeaStar CC17017 is designed for pre-1979 OMC, Johnson, and Evinrude engines equipped with BRP\/OMC controls, and connects directly to the existing OEM control head connection components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e This is a 17-foot control cable, part of SeaStar's 400 Series standard type cable line. Confirm 17 feet is the correct length for your boat before ordering, since control cables are not adjustable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17017 a genuine OEM part or an aftermarket cable?\u003c\/strong\u003e The CC17017 is manufactured by SeaStar as an OEM direct-replacement type cable, meaning it is built to use the existing OEM control head connection components rather than requiring an adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CC17017 has a black HDPE (high-density polyethylene) outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cable come pre-lubricated?\u003c\/strong\u003e Yes, the CC17017 is lubricated at the factory and uses a long-wearing HDPE liner that is ultra smooth and lubed for life, so no additional lubrication is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable during installation?\u003c\/strong\u003e The CC17017 has a minimum bend radius of 8 inches, which should not be exceeded when routing the cable to avoid binding or premature wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminals and fittings made of?\u003c\/strong\u003e The CC17017 uses stainless steel terminals and brass fittings, along with stainless or nylon covered core wires and moisture protective seals, for added corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable meet marine safety standards?\u003c\/strong\u003e SeaStar control cables, including the CC17017, are environmentally tested for marine applications and are built to exceed the engine manufacturer's specifications and meet ABYC, ISO\/IMCI\/NMMA requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty is included with the CC17017?\u003c\/strong\u003e The CC17017 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC17017 fit engines built after 1979?\u003c\/strong\u003e No, the CC17017 is specified for pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls; a different SeaStar cable part number applies to later model years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17017 manufactured?\u003c\/strong\u003e The CC17017 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the CC17017?\u003c\/strong\u003e The CC17017 is sold as a complete control cable assembly, 400 Series, 17 feet in length, ready to connect to existing OEM control head connection components.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989285712091,"sku":"TEL-CC17017","price":59.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_5c09be33-acf2-47e9-983a-765270b89ca0.jpg?v=1784474914"},{"product_id":"seastar-cc17019-400-series-control-cable-19-ft-for-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar CC17019 Control Cable, 400 Type, 19 Feet - Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17019 is a 400 Type control cable measuring 19 feet, built as a direct-replacement cable for engines using the proprietary BRP\/OMC control connection. It is designed for Pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls, using the existing connection components so it drops in without modifying the control head.\u003c\/p\u003e\u003cp\u003eThe cable uses stainless steel terminals and moisture-protective seals on the core wires for corrosion protection, with core wires that are stainless or nylon covered depending on application. A black HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil, and the cable carries a minimum bend radius of 8 inches. The liner is lubricated for life at the factory for smooth, consistent operation over time.\u003c\/p\u003e\u003cp\u003eSeaStar control cables are environmentally tested for marine applications and are designed to exceed the engine manufacturer's specifications. Before ordering, verify that 19 feet is the correct cable length for your application by measuring your existing control cable end to end.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17019\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 19 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e 400 Type (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.54 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE, Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless or Nylon Covered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Controls:\u003c\/strong\u003e BRP\/OMC Controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957027191\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC17019 control cable fit?\u003c\/strong\u003e The CC17019 is designed for Pre-1979 OMC\/Johnson\/Evinrude engines equipped with BRP\/OMC controls, using the existing control head connection components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17019 control cable?\u003c\/strong\u003e It measures 19 feet, which is part of the SeaStar 400 Type standard cable line identified by the CC170XX part number stem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if 19 feet is the right length for my boat?\u003c\/strong\u003e Measure your existing control cable end to end before ordering the CC17019, since installing the wrong length cable will not allow proper connection or full range of motion at the control head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CC17019 uses a black HDPE outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the internal wires protected from corrosion?\u003c\/strong\u003e Yes, the CC17019 uses stainless steel terminals along with stainless or nylon covered core wires and moisture-protective seals for added corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17019 use the same connection as my original OMC\/Johnson\/Evinrude control?\u003c\/strong\u003e Yes, it is engineered as a drop-in replacement that uses the existing connection components on Pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cable pre-lubricated?\u003c\/strong\u003e Yes, the CC17019 is lubricated at the factory for life, so the HDPE liner runs smooth without additional maintenance lubrication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for installing this cable?\u003c\/strong\u003e The CC17019 has an 8 inch minimum bend radius, which should be accounted for when routing the cable during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17019 control cable weigh?\u003c\/strong\u003e The SeaStar CC17019 weighs 1.54 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17019 control cable manufactured?\u003c\/strong\u003e The CC17019 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cable meet marine safety standards?\u003c\/strong\u003e SeaStar control cables, including the CC17019, exceed the engine manufacturer's specifications and are environmentally tested for marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC17019?\u003c\/strong\u003e The CC17019 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989286269147,"sku":"TEL-CC17019","price":60.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_2642047e-00b3-4b51-91ff-a76cc8c7f82c.jpg?v=1784474924"},{"product_id":"seastar-cc17020-400-series-control-cable-20-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar CC17020 400 Type Control Cable, 20 Feet, for 1993-Date Mercury, Mariner and Force Outboard Controls","description":"\u003cp\u003eThe SeaStar CC17020 is a 20-foot, 400 type standard control cable engineered as a drop-in replacement for outboard engine control heads that use a proprietary control cable connection. It is built for 1993-date engines with Mercury controls, all Mariner engines with Mercury\/Mariner controls (except pre-1993 40 HP and lower models), and all 1993-date Force (US Marine) engines with Force\/US Marine\/Mercury controls. The cable uses the existing connection components at both ends, so installation follows the same routing and hookup as the original equipment cable it replaces.\u003c\/p\u003e\u003cp\u003eConstruction features stainless steel terminals and brass fittings for corrosion resistance, along with stainless or nylon covered core wires and moisture protective seals to further guard against corrosion. The cable core rides inside a long-wearing HDPE liner that is smooth and lubricated for life, and the assembly is finished with a black HDPE outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil. The cable has an 8-inch minimum bend radius and is lubricated at the factory for the life of the product. It is manufactured in the U.S.A. And exceeds the engine manufacturer's specifications. Before ordering, verify that 20 feet is the correct length for your control cable run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\/Type:\u003c\/strong\u003e 400 type (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel terminals and brass fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e Black HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cable Strands:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957004086\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1993-date engines with Mercury controls\u003c\/li\u003e\n\u003cli\u003eAll Mariner engines with Mercury\/Mariner controls, except pre-1993 40 HP and lower models\u003c\/li\u003e\n\u003cli\u003eAll 1993-date Force (US Marine) engines with Force\/US Marine\/Mercury controls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the CC17020 control cable fit?\u003c\/strong\u003e The SeaStar CC17020 fits 1993-date engines with Mercury controls, all Mariner engines with Mercury\/Mariner controls (except pre-1993 40 HP and lower models), and all 1993-date Force (US Marine) engines with Force\/US Marine\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17020 cable?\u003c\/strong\u003e This SeaStar control cable measures 20 feet, as indicated by the 20 in the CC17020 part number. Confirm this matches your control cable run before ordering, since cable length is not adjustable after purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17020 an OEM part or an aftermarket cable?\u003c\/strong\u003e The CC17020 is a SeaStar drop-in replacement type cable designed to use the existing connection components on 400 type control heads, rather than a cable pulled from an original engine assembly line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC17020 cable made of?\u003c\/strong\u003e The CC17020 uses stainless steel terminals and brass fittings, stainless or nylon covered core wires with moisture protective seals, and a black HDPE outer jacket over an HDPE liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17020 resist corrosion and UV exposure?\u003c\/strong\u003e Yes. The stainless steel terminals, brass fittings, and moisture protective seals on the CC17020 guard against corrosion, and the black HDPE outer jacket resists abrasion, UV, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e The SeaStar CC17020 has an 8-inch minimum bend radius, which should be maintained when routing the cable to avoid kinking the core wire or liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17020 come pre-lubricated?\u003c\/strong\u003e Yes, the CC17020 is lubricated at the factory for the life of the cable, and the HDPE liner is designed to stay smooth without additional maintenance lubrication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17020 control cable manufactured?\u003c\/strong\u003e The SeaStar CC17020 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires and strands does the CC17020 have?\u003c\/strong\u003e The CC17020 has 2 wires and 1 cable strand in its core construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty covers the CC17020?\u003c\/strong\u003e SeaStar backs the CC17020 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17020 meet marine industry standards?\u003c\/strong\u003e The CC17020 exceeds the engine manufacturer's specifications and is environmentally tested for marine applications, meeting ABYC safety standards and ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CC17020 be used with any 400 type control cable connection?\u003c\/strong\u003e The CC17020 is built for the 400 type standard control cable connection on 1993-date Mercury-control engines, Mariner engines with Mercury\/Mariner controls (except pre-1993 40 HP and lower models), and 1993-date Force engines with Force\/US Marine\/Mercury controls, and it uses the existing connection components at the control head.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989286301915,"sku":"TEL-CC17020","price":61.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_da871880-166f-43f2-bdd1-73be4bc2e2e5.jpg?v=1784474926"},{"product_id":"seastar-cc17018-400-series-control-cable-18-ft-fits-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar Control Cable CC170XX, 18 Feet, for Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThis SeaStar Control Cable, part number CC17018, is an 18-foot, 400 Series OEM direct-replacement control cable engineered for Pre-1979 OMC\/Johnson\/Evinrude outboards equipped with BRP\/OMC controls. It is designed to drop into the existing connection components on the control head, so no modification to the original hardware is required. The cable uses stainless steel terminals and conduit fittings for corrosion resistance, paired with stainless or nylon-covered core wires and moisture protective seals that guard against water intrusion along the full length of the run. A black HDPE outer jacket resists abrasion and withstands the effects of UV exposure, salt water, chemicals, gasoline, and oil, making it suited to the marine environment. The cable has an 8 inch minimum bend radius and is lubricated at the factory for life, so it operates smoothly from installation onward without additional maintenance. It exceeds the engine manufacturer's specifications and meets ABYC safety standards along with ISO\/IMCI\/NMMA certification requirements. This cable is made in the USA and is backed by a two-year recreational user warranty against manufacturing defects. Before ordering, confirm that 18 feet is the correct cable length for your application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17018\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Control Cable Assembly, 400 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.86 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel, Nylon, Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Brass \/ Conduit fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Exceeds ABYC, ISO, IMCI, NMMA standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957016348\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude outboards with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar CC17018 control cable fit?\u003c\/strong\u003e The CC17018 (400 Series, CC170XX line) is built for Pre-1979 OMC\/Johnson\/Evinrude outboards equipped with BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17018 cable?\u003c\/strong\u003e This control cable measures 18 feet, as indicated by the CC17018 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e The CC17018 has an 8 inch minimum bend radius, so route it with gentle curves rather than sharp bends during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e A black HDPE outer jacket covers the CC17018 cable, resisting abrasion, UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the terminals on this cable corrosion resistant?\u003c\/strong\u003e Yes, the CC17018 uses stainless steel terminals and conduit fittings, along with moisture protective seals on the core wires, for added corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17018 come pre-lubricated?\u003c\/strong\u003e Yes, this control cable is lubricated at the factory for life, so no additional lubrication is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to this control cable?\u003c\/strong\u003e The CC17018 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17018 control cable made in the USA?\u003c\/strong\u003e Yes, this cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat safety standards does this cable meet?\u003c\/strong\u003e The CC17018 exceeds the engine manufacturer's specifications and meets ABYC safety standards along with ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many core wires does the CC17018 have?\u003c\/strong\u003e This cable has 2 core wires, which are stainless or nylon covered with moisture protective seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17018 cable weigh?\u003c\/strong\u003e The CC17018 control cable weighs 1.86 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC17018 work as a drop-in replacement for my original cable?\u003c\/strong\u003e Yes, the CC17018 is an OEM direct-replacement type cable designed to use the existing connection components on Pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989286400219,"sku":"TEL-CC17018","price":59.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61LkrgSSvKL_9a054f95-4c7c-40dd-a13a-366456525b52.jpg?v=1784474929"},{"product_id":"seastar-cc17016-400-series-control-cable-16-ft-pre-1979-omc-johnson-evinrude-with-brp-omc-controls","title":"SeaStar Control Cable CC17016, 400 Series 16 Feet, Fits Pre-1979 OMC\/Johnson\/Evinrude with BRP\/OMC Controls","description":"\u003cp\u003eThe SeaStar CC17016 is a 400 Series standard-type control cable assembly measuring 16 feet, engineered as an OEM direct-replacement for outboard engines built before 1979 that use OMC, Johnson, or Evinrude powerheads with BRP\/OMC control heads. It uses the existing connection components on the control head, so it drops in without modifying the mounting hardware. The cable core is available in stainless or nylon covered wire construction with moisture protective seals at each end, paired with stainless steel terminals and brass conduit fittings to resist salt water, chemical, and corrosion exposure over the life of the cable. A black HDPE outer jacket wraps the full length of the cable, resisting abrasion and the effects of UV, gasoline, and oil, and the cable is lubricated for life at the factory so it will not need periodic greasing. It is built to an 8 inch minimum bend radius, which matters when routing the cable through tight helm and engine compartments. Every SeaStar control cable is environmentally tested for marine use and is designed to exceed the engine manufacturer's own cable specifications, meeting ABYC safety standards and ISO\/IMCI\/NMMA certification requirements. Before ordering, confirm 16 feet is the correct length for your steering run, since control cables are not adjustable after the fact. The CC17016 is made in the U.S.A. And is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC17016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 400 Series Control Cable Assembly (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.41 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\/Fittings:\u003c\/strong\u003e Stainless steel terminals, brass conduit fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless or nylon covered, with moisture protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957024350\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC17016 control cable fit?\u003c\/strong\u003e The CC17016 is designed for engines built before 1979, specifically OMC, Johnson, or Evinrude outboards that use BRP\/OMC control heads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC17016 control cable?\u003c\/strong\u003e This SeaStar control cable is 16 feet long. Confirm 16 feet is the correct length for your steering run before ordering, since control cables cannot be shortened or lengthened after purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC17016 an OEM replacement or an aftermarket cable?\u003c\/strong\u003e It is an OEM direct-replacement type cable, meaning the SeaStar CC17016 uses the same connection components as the original equipment cable on Pre-1979 OMC\/Johnson\/Evinrude engines with BRP\/OMC controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC17016 control cable made of?\u003c\/strong\u003e The CC17016 uses stainless steel terminals and brass conduit fittings, a stainless or nylon covered core wire with moisture protective seals, and a black HDPE outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC17016 control cable weigh?\u003c\/strong\u003e The SeaStar CC17016 weighs 1.41 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17016 need to be greased after installation?\u003c\/strong\u003e No, the CC17016 is lubricated for life at the factory, so it does not require periodic greasing like some other cable designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for the CC17016 cable?\u003c\/strong\u003e The SeaStar CC17016 has an 8 inch minimum bend radius, which should be accounted for when routing the cable through the helm and engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CC17016 control cable?\u003c\/strong\u003e The CC17016 has a black HDPE outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the CC17016?\u003c\/strong\u003e Ordering the CC17016 gets you one complete 400 Series control cable assembly, 16 feet in length, ready to install using the existing connection components on the control head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC17016 meet marine safety standards?\u003c\/strong\u003e Yes, the CC17016 exceeds the engine manufacturer's specifications and meets ABYC safety standards along with ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC17016 control cable?\u003c\/strong\u003e The SeaStar CC17016 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC17016 control cable manufactured?\u003c\/strong\u003e The CC17016 is made in the U.S.A.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989286793435,"sku":"TEL-CC17016","price":58.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51vEK7FgrQL_736bb8c4-b735-4758-8cef-5d9b6f579541.jpg?v=1784474933"},{"product_id":"seastar-cc21010-mariner-630-series-control-cable-10-ft-fits-pre-1993-mariner-40-hp-under-with-mariner-mercury-controls","title":"SeaStar CC21010 630 Type Control Cable, 10 Feet, Mariner\/Mercury Controls (Pre-1993, 40 HP and Under)","description":"\u003cp\u003eThe SeaStar CC21010 is a 10-foot, 630-type standard control cable built for Mariner outboards (pre-1993, 40 HP and lower) equipped with Mariner\/Mercury controls. It uses SeaStar's Universal-type design with a 10-32 threaded terminal and clamp-type fitting at each end, so it works with the existing connection components on compatible engine controls. Construction includes stainless steel terminals and conduit fittings plus stainless steel Lubri-Core wires with moisture protective seals, all wrapped in a heavy-duty HDPE outer jacket that resists abrasion, UV exposure, salt water, chemicals, gasoline, and oil. The cable is lubricated for life at the factory, has an 8 inch minimum bend radius, and provides 3 inches of end rod travel. It is manufactured in the U.S.A. And is environmentally tested for marine applications, and it exceeds the engine manufacturer's specifications while meeting ABYC, ISO\/IMCI\/NMMA certification requirements. This is the standard-grade version of the 630 type cable; buyers running longer or more complex cable routings can step up to SeaStar's XTREME premium version of this same cable for smoother feel. Before ordering, confirm this 10-foot length matches the run needed for your control station to helm\/engine setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e 630 Type Control Cable (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Strands:\u003c\/strong\u003e Multi Strand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable End Fitting:\u003c\/strong\u003e 10-32 threaded terminal with clamp-type fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957017123\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMariner (Pre-1993, 40 HP and lower) with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e032377-3-xxx\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the CC21010 control cable fit?\u003c\/strong\u003e The SeaStar CC21010 fits Mariner outboards from before 1993 rated 40 HP and lower that use Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21010 cable?\u003c\/strong\u003e This SeaStar control cable measures 10 feet in length, as indicated by the CC21010 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the CC21010 replace?\u003c\/strong\u003e The CC21010 replaces SeaStar Solutions control cable part number 032377-3-xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the cable ends and connection type?\u003c\/strong\u003e The CC21010 uses a 10-32 threaded terminal with a clamp-type fitting at each end, designed to work with existing connection components on compatible Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the CC21010 made from?\u003c\/strong\u003e Construction includes stainless steel terminals, conduit fittings, and Lubri-Core wires with moisture protective seals, wrapped in a heavy-duty HDPE outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21010 weigh?\u003c\/strong\u003e The CC21010 control cable weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21010 pre-lubricated?\u003c\/strong\u003e Yes, the CC21010 is lubricated at the factory for life, so no additional lubrication is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e An 8 inch minimum bend radius applies to the CC21010, which should be respected when routing the cable to avoid binding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much end rod travel does the CC21010 provide?\u003c\/strong\u003e 3 inches of end rod travel is provided by the CC21010 control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a premium version of the CC21010?\u003c\/strong\u003e Yes, SeaStar's CCX633xx is the premium XTREME version of this same 630 type cable, offering smoother movement with less lost motion for demanding installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC21010 manufactured?\u003c\/strong\u003e The CC21010 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21010 meet marine safety standards?\u003c\/strong\u003e The CC21010 exceeds the engine manufacturer's specifications and meets ABYC safety standards along with ISO\/IMCI\/NMMA certification requirements.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989289677019,"sku":"TEL-CC21010","price":62.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL.jpg?v=1784474968"},{"product_id":"seastar-cc21011-mariner-630-control-cable-11-ft-fits-mercury-1965-date-and-force-1993-date-outboards-mercury-style-engine-end","title":"SeaStar CC21011 Mariner 630 Type Standard Outboard Control Cable","description":"\u003cp\u003eThe SeaStar CC21011 is a standard-grade control cable built to the Mariner 630 cable type, used in Mercury outboard control cable applications. It is the non-premium (standard) version of the Mariner 630 type cable line, distinguishing it from SeaStar's premium-grade cable offerings within the same catalog. This cable is designed to connect an outboard's throttle or shift mechanism to the helm control box, transmitting mechanical input from the control head to the engine.\u003c\/p\u003e\u003cp\u003eAs a control cable rated for the Mariner 630 type, it is built for use in setups that call for this specific cable type rather than a universal or premium fit. The cable weighs 1.4 pounds and carries UPC 731957005182 for reliable identification when ordering. Buyers should confirm their control box and cable-type requirement calls for the Mariner 630 standard type before purchasing, since control cables are matched by type rather than being universally interchangeable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Mariner 630 type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercury Outboard Control Cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957005182\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CC21011 control cable used for?\u003c\/strong\u003e The CC21011 is a standard-grade Mariner 630 type control cable used in Mercury outboard control cable applications, connecting the control box to the outboard's throttle or shift mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CC21011 a standard or premium cable?\u003c\/strong\u003e CC21011 is the standard-grade version of the Mariner 630 type cable, as distinguished from SeaStar's premium-grade cable offerings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable type is CC21011 built to?\u003c\/strong\u003e CC21011 is built to the Mariner 630 cable type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21011 control cable weigh?\u003c\/strong\u003e The SeaStar CC21011 weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the SeaStar CC21011?\u003c\/strong\u003e The UPC for the SeaStar CC21011 is 731957005182.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the CC21011 control cable?\u003c\/strong\u003e CC21011 is manufactured by SeaStar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill CC21011 fit any control box?\u003c\/strong\u003e No. CC21011 is matched to the Mariner 630 cable type, so it should be used where that specific cable type is required rather than treated as a universal fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does CC21011 belong to?\u003c\/strong\u003e CC21011 falls under Mercury Outboard Control Cables in the SeaStar cable lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CC21011 the same as a premium Mariner 630 type cable?\u003c\/strong\u003e No, CC21011 is the standard-grade Mariner 630 type cable, which is a different product from any premium-grade cable in the same type family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this control cable?\u003c\/strong\u003e The manufacturer part number is CC21011.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989289644251,"sku":"TEL-CC21011","price":63.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_18637466-020f-44c0-b284-f2698f0e1687.jpg?v=1785348990"},{"product_id":"seastar-cc21013-13-ft-630-type-control-cable-for-pre-1993-mariner-40-hp-under-with-mariner-mercury-controls","title":"SeaStar CC21013 Control Cable, Mariner 630 Type, 13 Feet - Fits Pre-1993 Mariner 40 HP and Less with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21013 is a 13-foot Mariner 630 type control cable built for pre-1993 Mariner outboards of 40 HP and less that use Mariner\/Mercury controls. It uses a 10-32 threaded terminal and a clamp-type fitting at each end, so it works with the existing connection components on compatible aftermarket and Original Equipment Manufacturer control setups. The cable is engineered for both throttle and shift applications where a 630 type Mariner cable is called for.\u003c\/p\u003e\u003cp\u003eConstruction features stainless steel terminals and conduit fittings along with stainless steel Lubri-Core wires protected by moisture seals, giving the cable added corrosion protection and a longer service life. The core is lubricated for life inside a long-wearing HDPE liner for an ultra smooth feel at the helm. A heavy, red HDPE outer jacket resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. The cable has an 8 inch minimum bend radius and 3 inches of end rod travel, and it exceeds engine manufacturer specifications for control cable performance.\u003c\/p\u003e\u003cp\u003eEach CC21013 cable is environmentally tested for marine applications and is made in the U.S.A. Before ordering, confirm that 13 feet is the correct length for your control run, since control cables must be ordered to the exact length needed for proper operation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21013\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\/Type:\u003c\/strong\u003e Mariner 630 Type (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal End:\u003c\/strong\u003e 10-32 Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Clamp-Type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal and Fitting Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless Steel Lubri-Core Wire with Moisture Protective Seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e Heavy Red HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957001788\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePre-1993 Mariner outboards, 40 HP and less, with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the CC21013 control cable fit?\u003c\/strong\u003e The SeaStar CC21013 fits pre-1993 Mariner outboards rated 40 HP and less that use Mariner\/Mercury controls, and it is built to the Mariner 630 type standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21013 cable?\u003c\/strong\u003e This SeaStar control cable measures 13 feet, matching the 13-foot designation in its CC21013 part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminal ends does this cable use?\u003c\/strong\u003e The CC21013 has a 10-32 threaded terminal and a clamp-type fitting at each end, allowing it to use the existing connection components on compatible controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cable work with Original Equipment Manufacturer controls or only aftermarket ones?\u003c\/strong\u003e The CC21013 is designed to work with both aftermarket engine controls and Original Equipment Manufacturer units that accept a 10-32 threaded, Mariner 630 type control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are used in the CC21013 cable?\u003c\/strong\u003e Stainless steel terminals and conduit fittings are paired with stainless steel Lubri-Core wires and moisture protective seals, all enclosed in a heavy red HDPE outer jacket for corrosion and abrasion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tight of a bend can this cable handle during installation?\u003c\/strong\u003e The CC21013 has an 8 inch minimum bend radius, which should be maintained when routing the cable through the boat to avoid binding or premature wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much travel does the control end of the CC21013 cable have?\u003c\/strong\u003e The end rod on the CC21013 provides 3 inches of travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21013 pre-lubricated?\u003c\/strong\u003e Yes, the SeaStar CC21013 is lubricated at the factory for life, so no additional lubrication of the core is required before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21013 tested for marine use?\u003c\/strong\u003e Yes, this SeaStar control cable is environmentally tested for marine applications and exceeds engine manufacturer specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC21013 control cable manufactured?\u003c\/strong\u003e The CC21013 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wires does the CC21013 cable have?\u003c\/strong\u003e The CC21013 is a 2-wire control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CC21013 outer jacket?\u003c\/strong\u003e The outer jacket on the CC21013 is black.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989290496219,"sku":"TEL-CC21013","price":66.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL_af70a306-4a15-4fac-8cae-87944ce115db.jpg?v=1784474980"},{"product_id":"seastar-cc21014-control-cable-14-ft-630-type-mariner-series-fits-pre-1993-mariner-mercury-40-hp-and-under-with-mariner-mercury-controls","title":"SeaStar CC21014 Control Cable, Mariner 630 Type, 14 Feet, Fits Mariner Pre-1993 40 HP and Lower with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21014 is a 14 foot Mariner 630 type control cable engineered as an OEM direct-replacement for Mariner outboards built before 1993 rated 40 HP and lower that use Mariner\/Mercury controls. It uses a 10-32 threaded terminal with a clamp-type fitting at each end, so it works with the existing connection components on compatible control setups without modification. The cable is built with stainless steel terminals and conduit fittings, along with stainless or nylon covered core wires that include moisture protective seals for added corrosion protection and longer service life. A heavy HDPE outer jacket resists abrasion and withstands the effects of UV exposure, salt water, chemicals, gasoline, and oil, making it suited to continuous marine use. The cable is lubricated for life at the factory, has an 8 inch minimum bend radius, and provides 3 inches of end rod travel. It is environmentally tested for marine applications and is manufactured to exceed the engine manufacturer's specifications. The CC21014 is made in the U.S.A. And is backed by a two-year recreational user warranty against manufacturing defects. For applications that call for an especially smooth feel at the control, such as long cable runs, twin stations, or routings with multiple bends, SeaStar also offers the CCX633xx premium XTREME version of this cable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Mariner 630 Type (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine End Connection:\u003c\/strong\u003e 10-32 threaded terminal with clamp-type fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal and Conduit Fittings Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless steel or nylon covered, with moisture protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubrication:\u003c\/strong\u003e Lubricated for life at the factory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.74 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMariner (pre-1993, 40 HP and lower) with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e032377-3-xxx\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC21014 control cable fit?\u003c\/strong\u003e The CC21014 is designed for Mariner outboards built before 1993 rated 40 HP and lower that use Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e The SeaStar CC21014 measures 14 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of control cable is the CC21014?\u003c\/strong\u003e It is a Mariner 630 type standard control cable, part of SeaStar's line of 3300\/33C style engine control cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part does the CC21014 replace?\u003c\/strong\u003e This cable replaces SeaStar Solutions Control Cable Part Number 032377-3-xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat end connection does the CC21014 use?\u003c\/strong\u003e Each end of the CC21014 has a 10-32 threaded terminal with a clamp-type fitting, allowing it to use existing connection components on compatible controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21014 pre-lubricated?\u003c\/strong\u003e Yes, the CC21014 control cable is lubricated for life at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e The CC21014 has an 8 inch minimum bend radius.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much end rod travel does the CC21014 provide?\u003c\/strong\u003e This control cable provides 3 inches of end rod travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials protect the CC21014 from corrosion?\u003c\/strong\u003e The cable uses stainless steel terminals and conduit fittings, with stainless or nylon covered core wires that include moisture protective seals for corrosion protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a premium version of the CC21014 available?\u003c\/strong\u003e Yes, the CCX633xx is the premium XTREME version of this cable, offering easier movement with minimum lost motion for demanding routings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21014 come with a warranty?\u003c\/strong\u003e The CC21014 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21014 weigh?\u003c\/strong\u003e The CC21014 control cable weighs 0.74 pounds.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989290725595,"sku":"TEL-CC21014","price":67.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL_2f7cc6b4-08a0-4f6a-abd6-21cccfccc5c8.jpg?v=1784474981"},{"product_id":"seastar-cc21012-630-type-marine-control-cable-12-ft-fits-mariner-pre-1993-40-hp-under-with-mariner-mercury-controls","title":"SeaStar CC21012 12-Foot 630 Type Control Cable for Mariner Pre-1993 40 HP and Less with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21012 is a 12-foot, 630 type standard control cable built for Mariner outboards from before 1993, 40 HP and less, that use Mariner\/Mercury controls. It uses a 10-32 threaded terminal with a clamp-type fitting at each end, so it works with the existing connection components already on the boat rather than requiring new hardware.\u003c\/p\u003e\u003cp\u003eConstruction centers on stainless steel terminals and conduit fittings for corrosion resistance, paired with stainless steel Lubri-Core wires (also available with a nylon cover) that carry moisture protective seals for added protection and longer service life. The core is lubricated for life at the factory and runs inside a long-wearing, ultra-smooth HDPE liner. The outer jacket is a heavy-duty HDPE material that resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. The cable has an 8 inch minimum bend radius and 3 inches of end rod travel.\u003c\/p\u003e\u003cp\u003eThis cable exceeds engine manufacturer specifications and is environmentally tested for marine applications. It is manufactured in the U.S.A. And is designed for Mariner (pre-1993, 40 HP and less) applications using Mariner\/Mercury controls. Confirm the correct cable length for the application before ordering, since control cables are not adjustable after purchase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Teleflex Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Control Cable (630 Type, Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 12 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e 10-32 Threaded Terminal and Clamp-Type Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire Material:\u003c\/strong\u003e Stainless Steel or Nylon Covered, Lubri-Core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE (High-Density Polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal and Conduit Fitting Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.67 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957009081\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMariner (Pre-1993, 40 HP and less) with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC21012 control cable used for?\u003c\/strong\u003e The SeaStar CC21012 is a 12-foot, 630 type control cable used to connect Mariner outboard engine controls to the throttle and shift mechanism on the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and engines does the CC21012 fit?\u003c\/strong\u003e This cable is built for Mariner outboards from before 1993, 40 HP and less, that use Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21012 cable?\u003c\/strong\u003e It is 12 feet long, as indicated by the CC21012 part number. Always verify the existing cable length before ordering a replacement since lengths are not adjustable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminal and fitting does this cable use?\u003c\/strong\u003e The CC21012 has a 10-32 threaded terminal with a clamp-type fitting at each end, allowing it to work with existing connection hardware on Mariner\/Mercury control systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC21012 made from?\u003c\/strong\u003e It features stainless steel terminals and conduit fittings, stainless steel or nylon-covered Lubri-Core wires with moisture protective seals, and a heavy-duty HDPE outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21012 resistant to corrosion and UV exposure?\u003c\/strong\u003e Yes, the stainless steel terminals and conduit fittings resist corrosion, and the HDPE outer jacket resists abrasion, UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21012 weigh?\u003c\/strong\u003e The SeaStar CC21012 weighs 0.67 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21012 need to be lubricated after installation?\u003c\/strong\u003e No, the CC21012 is lubricated for life at the factory, so no additional lubrication is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for the CC21012?\u003c\/strong\u003e The minimum bend radius is 8 inches, and the cable provides 3 inches of end rod travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a premium version of the CC21012 available?\u003c\/strong\u003e Yes, SeaStar offers a premium XTREME technology version of this cable series under part number CCX630XX for applications where smoother, lower-effort operation is important.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC21012 manufactured?\u003c\/strong\u003e The CC21012 control cable is made in the U.S.A. By Teleflex Marine under the SeaStar brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21012 exceed manufacturer specifications?\u003c\/strong\u003e Yes, the CC21012 is built to exceed engine manufacturer specifications and is environmentally tested for marine applications.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989291217115,"sku":"TEL-CC21012","price":64.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/214k5928waL.jpg?v=1784474992"},{"product_id":"seastar-cc21016-control-cable-16-ft-630-type-fits-mariner-pre-1993-40-hp-and-less-with-mariner-mercury-controls","title":"SeaStar CC21016 Control Cable, 16 Feet, Mariner 630 Type for Pre-1993 Mariner 40 HP and Less with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21016 is a 16 foot control cable built to the Mariner 630 standard-type design, made for pre-1993 Mariner outboards of 40 HP and less that use Mariner\/Mercury controls. It is engineered as a direct-replacement type cable, matching the original connection style so it installs using the boat's existing control hardware without modification.\u003c\/p\u003e\u003cp\u003eConstruction features stainless steel terminals and conduit fittings, with stainless or nylon-covered core wire and moisture protective seals at the terminal ends for corrosion resistance. A heavy-duty red HDPE outer jacket resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. The cable is lubricated for life at the factory, uses a threaded terminal with a clamp-type fitting at each end, has an 8 inch minimum bend radius, and provides 3 inches of end rod travel. It exceeds the engine manufacturer's specifications and is made in the U.S.A.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e CC210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Mariner 630 Type (Standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE outer jacket with stainless steel terminals and conduit fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Male-to-Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal End:\u003c\/strong\u003e 10-32 threaded terminal with clamp-type fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957021182\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMariner (Pre-1993, 40 HP and less) with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSeaStar Solutions Control Cable Part Number 032377-3-xxx\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and engines does the SeaStar CC21016 fit?\u003c\/strong\u003e The CC21016 is designed for pre-1993 Mariner outboards of 40 HP and less that use Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this control cable?\u003c\/strong\u003e The SeaStar CC21016 measures 16 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the CC21016 replace?\u003c\/strong\u003e It replaces SeaStar Solutions Control Cable Part Number 032377-3-xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct OEM-style replacement or an aftermarket redesign?\u003c\/strong\u003e The CC21016 is an OEM direct-replacement type cable, meaning it uses the same connection style as the original so it works with existing Mariner\/Mercury control hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e A heavy, red HDPE outer jacket covers the CC21016, chosen for its resistance to abrasion, UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cable come pre-lubricated?\u003c\/strong\u003e Yes, the CC21016 is lubricated at the factory for life, so no additional lubrication is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminal ends does the CC21016 use?\u003c\/strong\u003e It has a 10-32 threaded terminal and a clamp-type fitting at each end, designed to use the existing connection components on the control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21016 weigh?\u003c\/strong\u003e The SeaStar CC21016 weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for routing this cable?\u003c\/strong\u003e The CC21016 has an 8 inch minimum bend radius.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much end rod travel does this cable provide?\u003c\/strong\u003e The CC21016 provides 3 inches of end rod travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21016 corrosion resistant?\u003c\/strong\u003e Yes, it uses stainless steel terminals and conduit fittings along with moisture protective seals at the core wire ends for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar CC21016 manufactured?\u003c\/strong\u003e The CC21016 control cable is made in the U.S.A.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989292003547,"sku":"TEL-CC21016","price":69.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL_2e7a8647-b9f4-4a7f-9dc8-2e6c374874d5.jpg?v=1784475023"},{"product_id":"seastar-cc21015-15-ft-boat-control-cable-630-type-for-pre-1993-mariner-40-hp-under-with-mariner-mercury-controls","title":"SeaStar CC21015 Control Cable, 15 Foot, Fits Mariner Pre-1993 40 HP and Less with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21015 is a 15 foot control cable built for Mariner outboards from before 1993 rated 40 HP and less that use Mariner\/Mercury controls. It is part of SeaStar's Mariner 630 type standard control cable line, engineered to exceed the engine manufacturer's specifications while using the existing connection components at the helm and engine, so no control-box modification is needed.\u003c\/p\u003e\u003cp\u003eEach end terminates in a 10-32 threaded terminal with a clamp-type fitting, giving 3 inches of end rod travel and an 8 inch minimum bend radius for routing through tight engine bays. The cable core is built from stainless steel Lubri-Core wires with moisture protective seals, wrapped in stainless steel terminals and conduit fittings for corrosion resistance. A heavy HDPE outer jacket in black resists abrasion, UV exposure, salt water, chemicals, gasoline, and oil. The cable is lubricated for life at the factory, so no field greasing is required before installation.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the 15 foot length matches your current cable by measuring the existing cable end-to-end, since control cables are not adjustable in length. This cable is made in the U.S.A. And is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Wires:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Strands:\u003c\/strong\u003e Multi strand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 10-32 threaded terminal with clamp-type fitting at each end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine End Connection:\u003c\/strong\u003e Mercury style engine end connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire Material:\u003c\/strong\u003e Stainless steel Lubri-Core wires with moisture protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket Material:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957027870\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMariner outboards, Pre-1993, 40 HP and less, using Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC21015 control cable fit?\u003c\/strong\u003e The CC21015 is designed for Mariner outboards built before 1993 rated 40 HP and less that use Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21015 control cable?\u003c\/strong\u003e This cable measures 15 feet, and the length is fixed, so it will not work as a substitute for a different length control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of terminal ends does this cable use?\u003c\/strong\u003e Each end of the CC21015 has a 10-32 threaded terminal with a clamp-type fitting, using the same connection components as the original control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21015 cable compatible with aftermarket engine controls?\u003c\/strong\u003e Yes, the CC21015 is built to fit controls that accept 10-32 threaded cable ends, which covers most aftermarket controls as well as the original Mariner\/Mercury setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC21015 control cable made of?\u003c\/strong\u003e It uses stainless steel Lubri-Core wires with moisture protective seals inside a black HDPE outer jacket, with stainless steel terminals and conduit fittings for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21015 control cable weigh?\u003c\/strong\u003e The SeaStar CC21015 weighs 1.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21015 need to be lubricated before installation?\u003c\/strong\u003e No, the CC21015 is lubricated for life at the factory, so it is ready to install without additional greasing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this control cable?\u003c\/strong\u003e The CC21015 has an 8 inch minimum bend radius, which should be respected when routing it through the engine bay to avoid kinking the cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much end rod travel does the CC21015 provide?\u003c\/strong\u003e This cable provides 3 inches of end rod travel at the terminal ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the 15 foot length is correct for my boat?\u003c\/strong\u003e Measure your existing control cable end-to-end before ordering the CC21015, since control cables are made to a fixed length and cannot be trimmed or extended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21015 an OEM SeaStar part or an aftermarket copy?\u003c\/strong\u003e The CC21015 is a genuine SeaStar control cable from the Mariner 630 type standard line, built to meet or exceed the original engine manufacturer's specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CC21015 control cable?\u003c\/strong\u003e SeaStar backs the CC21015 with a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989292036315,"sku":"TEL-CC21015","price":68.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL_7b15e5ea-6d14-4830-8b75-6fc2fdd97124.jpg?v=1784475023"},{"product_id":"seastar-cc21018-marine-control-cable-18-ft-630-mariner-type-for-pre-1993-mariner-mercury-controls-40-hp-and-less","title":"SeaStar CC21018 18-Foot 630 Type Control Cable - Mariner Pre-1993 40 HP and Less with Mariner\/Mercury Controls","description":"\u003cp\u003eThe SeaStar CC21018 is an 18-foot, 630 type control cable built for Mariner outboards from before 1993 rated at 40 HP and less that use Mariner\/Mercury controls. It uses a 10-32 threaded terminal with a clamp-type fitting at each end, so it works with the existing connection hardware on compatible control setups rather than requiring new mounting components.\u003c\/p\u003e\u003cp\u003eConstruction is centered on corrosion resistance and long service life. The cable core is stainless steel Lubri-Core wire with moisture protective seals, running through a long-wearing HDPE liner that is lubricated for life for smooth, low-friction operation. Terminals and conduit fittings are stainless steel. The outer jacket is a heavy HDPE material designed to resist abrasion and stand up to UV exposure, salt water, chemicals, gasoline, and oil. The cable has an 8 inch minimum bend radius and 3 inches of end rod travel, and is built to exceed the engine manufacturer's specifications.\u003c\/p\u003e\u003cp\u003eThis cable is intended as a direct-replacement type for Mariner\/Mercury control applications and is manufactured in the U.S.A. Before ordering, confirm that 18 feet is the correct cable length for your application, since control cables must be sized precisely for proper operation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC21018\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 630 type control cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Mariner (Pre-1993, 40 HP and less) with Mariner\/Mercury controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e 10-32 threaded terminal, clamp-type fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e Stainless steel Lubri-Core wire with moisture protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal and Fitting Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e Heavy HDPE, abrasion, UV, salt water, chemical, gasoline, and oil resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Rod Travel:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 18 x 18 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.97 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957000422\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMariner (Pre-1993, 40 HP and less) with Mariner\/Mercury controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e032377-3-xxx\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the SeaStar CC21018 control cable fit?\u003c\/strong\u003e The CC21018 fits Mariner outboards from before 1993 rated at 40 HP and less that use Mariner\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CC21018 control cable?\u003c\/strong\u003e This control cable, part number CC21018, is 18 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector does this cable use?\u003c\/strong\u003e The CC21018 uses a 10-32 threaded terminal with a clamp-type fitting at each end, matching the existing connection hardware on compatible Mariner\/Mercury control setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC21018 replace an existing SeaStar cable number?\u003c\/strong\u003e Yes, this 630 type cable replaces SeaStar Solutions control cable part number 032377-3-xxx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC21018 cable made from?\u003c\/strong\u003e It uses stainless steel Lubri-Core wire with moisture protective seals inside a long-wearing HDPE liner, with stainless steel terminals and conduit fittings, and a heavy HDPE outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CC21018 weigh?\u003c\/strong\u003e The SeaStar CC21018 control cable weighs 1.97 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21018 resistant to weather and chemical exposure?\u003c\/strong\u003e Yes, its heavy HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius for this cable?\u003c\/strong\u003e The CC21018 has an 8 inch minimum bend radius.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much end rod travel does the CC21018 provide?\u003c\/strong\u003e This cable provides 3 inches of end rod travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CC21018 pre-lubricated?\u003c\/strong\u003e Yes, the HDPE liner on the CC21018 is lubricated for life at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CC21018 control cable manufactured?\u003c\/strong\u003e The SeaStar CC21018 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if 18 feet is the right length for my application?\u003c\/strong\u003e Before ordering the CC21018, measure your existing control cable run to confirm 18 feet is the correct length, since control cables must match the application precisely for proper operation.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989292101851,"sku":"TEL-CC21018","price":72.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61k_KTvibXL_87ad803e-46e4-4bc7-a160-65896a6550a4.jpg?v=1784475025"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/61SIYSzpYEL.jpg?v=1785360090","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-steering-systems.oembed?page=4","provider":"Good Vibes Marina","version":"1.0","type":"link"}