{"title":"Brake Actuators \u0026 Master Cylinders","description":null,"products":[{"product_id":"dexter-068-011-00-master-cylinder-bracket-assembly-right-hand-primered","title":"Dexter Master Cylinder Bracket Assembly, Right Hand, Primered - Part 068-011-00","description":"\u003cp\u003eThe Dexter Bracket Assy M\/C RH (part number 068-011-00) is a right-hand master cylinder mounting bracket for trailer brake actuator systems. This bracket provides the mounting structure that positions and secures the master cylinder on the right-hand side of the actuator assembly, giving the hydraulic brake components a stable, correctly aligned base. It ships with a primered finish, meaning it is coated with primer as a base layer rather than a final paint or plated finish, so it is ready to be top-coated or painted to match the rest of the trailer running gear if desired.\u003c\/p\u003e\u003cp\u003eThis is a right-hand specific bracket. It is designed for the right side of the actuator assembly only and is not interchangeable with a left-hand bracket, which is sold under its own separate Dexter part number. Always confirm you are ordering the correct side before installing, since installing the wrong side will not allow the master cylinder to mount correctly.\u003c\/p\u003e\u003cp\u003eAs a Dexter component, this bracket is intended for use in trailer brake actuator repair and rebuild work, where a bracket has become bent, corroded, or damaged and needs to be replaced with a properly fitted OEM part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-011-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Master Cylinder Bracket Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Primered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.78 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 068-011-00 bracket for the right or left side?\u003c\/strong\u003e Part 068-011-00 is the right-hand (RH) master cylinder bracket. The left-hand version of this bracket is a separate Dexter part number, so check which side your actuator needs before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this bracket do?\u003c\/strong\u003e It is the mounting bracket that holds and positions the master cylinder on the right-hand side of a trailer brake actuator assembly, part number 068-011-00 from Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 068-011-00 bracket come in?\u003c\/strong\u003e It has a primered finish, meaning it is coated with a base primer rather than a final paint or plating, so it can be painted or top-coated after installation if desired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-011-00 bracket weigh?\u003c\/strong\u003e This bracket weighs 1.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this bracket myself?\u003c\/strong\u003e The 068-011-00 bracket is a direct-mount replacement bracket, so it can typically be installed by removing the old bracket from the actuator assembly and bolting the new one in its place using the existing hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill using the wrong side bracket work if I only need a temporary fix?\u003c\/strong\u003e No. Because 068-011-00 is machined and positioned specifically for the right-hand side, using it in place of a left-hand bracket will not allow the master cylinder to mount or align correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 068-011-00 is a genuine Dexter master cylinder bracket assembly, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bracket used with?\u003c\/strong\u003e The 068-011-00 bracket is used as part of a trailer brake actuator assembly, providing the mounting point for the actuator's master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the primered finish need to be painted before use?\u003c\/strong\u003e The primered finish on the 068-011-00 bracket protects the metal and can be used as-is, but it can also be top-coated with paint to match other running gear components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with this part?\u003c\/strong\u003e This listing includes the Dexter 068-011-00 right-hand master cylinder bracket assembly itself.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257657563,"sku":"DEX-068-011-00","price":42.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_d5b7ec19-321a-4a61-bb31-37e22fe95e68.jpg?v=1785349554"},{"product_id":"dexter-068-012-00-master-cylinder-mounting-bracket-assembly-left-hand-primered","title":"Dexter Left-Hand Master Cylinder Bracket Assembly, Primered - 068-012-00","description":"\u003cp\u003eThe Dexter 068-012-00 is a left-hand (LH) master cylinder bracket assembly used in trailer brake actuator setups. It provides the mounting structure that positions and secures the master cylinder on the left side of the actuator assembly, and it comes with a primered finish, ready for paint or further coating to match the trailer or actuator housing. This bracket is designed as a replacement or service part for trailer brake actuator systems, allowing an owner or installer to restore proper master cylinder mounting on the left-hand side without replacing the entire actuator assembly.\u003c\/p\u003e\u003cp\u003eBecause this is a left-hand specific bracket, it is not interchangeable with a right-hand bracket; the two sides are separate parts, so it is important to confirm that a left-hand bracket is what your actuator assembly requires before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-012-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bracket Assy M\/C Lh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Primered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.78 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-012-00?\u003c\/strong\u003e The Dexter 068-012-00 is a left-hand (LH) master cylinder bracket assembly used in trailer brake actuator systems, providing the mounting point for the master cylinder on the left side of the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bracket for the left or right side of the actuator?\u003c\/strong\u003e This is a left-hand (LH) specific bracket assembly, part number 068-012-00. It is not designed for right-hand mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 068-012-00 be used on the right-hand side instead?\u003c\/strong\u003e No. The Dexter 068-012-00 is designated left-hand (LH) only; a right-hand bracket would be a separate part number, so the left-hand and right-hand brackets are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this bracket come with?\u003c\/strong\u003e The Dexter 068-012-00 bracket assembly ships with a primered finish, so it is ready for paint or an additional protective coating before or after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-012-00 bracket weigh?\u003c\/strong\u003e This bracket assembly weighs 1.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer system is the 068-012-00 used with?\u003c\/strong\u003e The Dexter 068-012-00 is categorized as a trailer brake actuator part, specifically a master cylinder mounting bracket for the actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 068-012-00 a complete master cylinder or just a bracket?\u003c\/strong\u003e It is the bracket assembly only (Bracket Assy M\/C Lh), which mounts and supports the master cylinder on the left-hand side; it is not the master cylinder itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the primered finish need to be painted before use?\u003c\/strong\u003e The primered finish on the Dexter 068-012-00 is a base coat intended for further paint or coating, though it can also be left as-is depending on the installation environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 068-012-00 an OEM Dexter part?\u003c\/strong\u003e Yes, 068-012-00 is the Dexter manufacturer part number for this left-hand master cylinder bracket assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 068-012-00?\u003c\/strong\u003e Ordering the Dexter 068-012-00 gets you the left-hand master cylinder bracket assembly with its primered finish, as described by this part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257690331,"sku":"DEX-068-012-00","price":42.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_5ca606e6-6535-4df6-8fea-8e5fe1b5758f.jpg?v=1785349559"},{"product_id":"model-60-surge-actuator-shock-absorber-damper-oem-2336200-fits-titan-dico-model-60-trailer-brake-actuators-mpn-053-012-00","title":"Dexter Damper Model 60 Trailer Brake Actuator Shock Absorber, Zinc-Plated Steel","description":"\u003cp\u003eThe Dexter Damper Model 60 is the shock absorber component for Model 60 surge actuators, engineered to smooth out braking pulses and reduce shock loading on the trailer's brake linkage during towing. It is built from durable steel with a zinc-plated finish that resists corrosion in the wet, road-spray conditions trailer actuators are routinely exposed to. This damper is sold as an individual replacement part; the surrounding actuator housing, linkage, and other hardware are sold separately. It fits Titan and Dico Model 60 Actuators, extending to 6-1\/4 inches and collapsing to 4-15\/16 inches, matching the working range of the original damper it replaces. At 1.08 pounds, it is a straightforward drop-in replacement for a worn or seized shock absorber, restoring proper surge-brake actuation without requiring replacement of the entire actuator assembly. Because it is manufactured to the same dimensions and material specification as the unit it replaces, it installs in place of the original damper on compatible Model 60 actuators. This part is intended for trailer owners and service shops replacing a single worn component rather than rebuilding the full surge actuator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 053-012-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed Length:\u003c\/strong\u003e 4-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuators:\u003c\/strong\u003e Titan and Dico Model 60 Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTitan Model 60 Actuators\u003c\/li\u003e\n\u003cli\u003eDico Model 60 Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Damper Model 60 used for?\u003c\/strong\u003e It is the shock absorber component of a Model 60 surge actuator, absorbing braking pulses so the trailer's surge brakes actuate smoothly instead of jerking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators does part number 053-012-00 fit?\u003c\/strong\u003e The Dexter Damper Model 60 is designed to fit Titan and Dico Model 60 Actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the damper made of?\u003c\/strong\u003e It is made of durable steel with a zinc-plated finish, which resists corrosion from road spray and wet towing conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the extended and collapsed lengths of this damper?\u003c\/strong\u003e The Dexter Damper Model 60 measures 6-1\/4 inches extended and 4-15\/16 inches collapsed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter Damper Model 60 weigh?\u003c\/strong\u003e It weighs 1.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this damper work on Dico Model 60 actuators, or only Titan?\u003c\/strong\u003e Yes, the 053-012-00 damper is compatible with both Titan and Dico Model 60 Actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come with the rest of the surge actuator hardware?\u003c\/strong\u003e No, only the damper (shock absorber) is included; other Model 60 actuator components are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct replacement for a worn actuator damper?\u003c\/strong\u003e Yes, the Dexter Damper Model 60 is built to the dimensions and material specification of the original damper it replaces, allowing it to install in place of a worn unit on a compatible Model 60 actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this damper resist rust after repeated exposure to water?\u003c\/strong\u003e The zinc-plated steel construction of the 053-012-00 damper is intended to resist corrosion during normal towing and launch exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I order to replace my surge actuator's damper?\u003c\/strong\u003e Order Dexter part number 053-012-00, the Damper Model 60, if your surge actuator is a Titan or Dico Model 60.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257821403,"sku":"DEX-053-012-00","price":69.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-2336200_lg__11649.1558114135.500.750.jpg?v=1785188279"},{"product_id":"master-cylinder-for-model-60-aero-7500-actuators-1-25-in-bore-drum-brake-dexter-068-085-00","title":"Dexter Master Cylinder Assembly, 1.25 Inch Bore, for Model 60 Actuator and Aero 7500 Actuator","description":"\u003cp\u003eThis is the Dexter master cylinder assembly (part number 068-085-00), a 1.25 inch bore drum-brake master cylinder built for use with the Model 60 actuator and the Aero 7500 actuator. The master cylinder is the core hydraulic component inside a surge brake actuator: when the tow vehicle brakes and the actuator compresses, this cylinder converts that mechanical force into hydraulic pressure, sending fluid through the brake lines to apply the trailer's drum brakes. Because it is sized specifically to the Model 60 and Aero 7500 actuator bodies, it is intended as a direct replacement inside those units rather than a universal part.\u003c\/p\u003e\u003cp\u003eOrdering the correct bore size matters for proper brake feel and stopping power, and this unit is specified at a 1.25 inch bore to match its intended actuators. It ships as the master cylinder only, for installation into an existing Model 60 or Aero 7500 actuator housing during a rebuild or repair.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-085-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Master Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore Size:\u003c\/strong\u003e 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuators:\u003c\/strong\u003e Model 60 Actuator, Aero 7500 Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Drum brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel 60 Actuator\u003c\/li\u003e\n\u003cli\u003eAero 7500 Actuator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators does the Dexter 068-085-00 master cylinder fit?\u003c\/strong\u003e The Dexter 068-085-00 master cylinder is built for use with the Model 60 actuator and the Aero 7500 actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bore size of this master cylinder?\u003c\/strong\u003e This Dexter master cylinder has a 1.25 inch bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the full actuator assembly?\u003c\/strong\u003e No, part number 068-085-00 is the master cylinder only, intended for installation inside an existing Model 60 or Aero 7500 actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brakes does this master cylinder work with?\u003c\/strong\u003e It is a drum brake master cylinder, designed to generate hydraulic pressure for a trailer's drum brake system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-085-00 master cylinder weigh?\u003c\/strong\u003e It weighs 3.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this master cylinder work with any surge actuator?\u003c\/strong\u003e No, the 068-085-00 is sized specifically for the Model 60 and Aero 7500 actuators, so it should be matched to one of those units rather than used as a universal fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the master cylinder in my actuator?\u003c\/strong\u003e A worn or leaking master cylinder inside a Model 60 or Aero 7500 actuator can cause soft brakes or fluid loss, and replacing it with the Dexter 068-085-00 restores proper hydraulic function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 068-085-00 is a Dexter-branded master cylinder assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the bore size affect braking performance?\u003c\/strong\u003e Yes, bore size determines the hydraulic pressure and fluid volume the master cylinder produces, which is why the 1.25 inch bore of the 068-085-00 should match the actuator it is installed in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this myself or does it require a mechanic?\u003c\/strong\u003e Installing the Dexter 068-085-00 master cylinder involves opening the actuator housing and connecting hydraulic lines, a job that is commonly done by anyone comfortable rebuilding a trailer brake actuator, though a professional can also perform it.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257854171,"sku":"DEX-068-085-00","price":118.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2336100042_1__74526.1558140719.500.750.jpg?v=1785189169"},{"product_id":"dexter-model-60-m-c-gasket-mpn-068-091-00","title":"Dexter Gasket for Model 60 Master Cylinder, Part 068-091-00","description":"\u003cp\u003eThis is the Dexter gasket for the Model 60 master cylinder, part number 068-091-00. It is a replacement sealing gasket sized for the Model 60 master cylinder assembly used in Dexter trailer brake systems, and it is intended to be installed between the master cylinder body and its mating surface to maintain a proper seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-091-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Master Cylinder Model:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter Model 60 master cylinder\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo cross-reference numbers available for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat master cylinder does Dexter part 068-091-00 fit?\u003c\/strong\u003e Dexter gasket 068-091-00 is designed for the Model 60 master cylinder used in Dexter trailer brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 068-091-00 a genuine Dexter part?\u003c\/strong\u003e Yes, 068-091-00 is a genuine Dexter part number for the Model 60 master cylinder gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this gasket weigh?\u003c\/strong\u003e The Dexter Model 60 master cylinder gasket, part 068-091-00, weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of this gasket?\u003c\/strong\u003e This gasket seals the Model 60 master cylinder assembly to help maintain a proper seal at the mating surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket come with mounting hardware?\u003c\/strong\u003e This listing is for the gasket only, Dexter part 068-091-00, for the Model 60 master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this gasket sold individually?\u003c\/strong\u003e Yes, Dexter part 068-091-00 is sold as a single gasket for the Model 60 master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gasket work with other master cylinder models?\u003c\/strong\u003e Dexter part 068-091-00 is made for the Model 60 master cylinder; compatibility with other master cylinder models is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 068-091-00 gasket made from?\u003c\/strong\u003e Material details for Dexter part 068-091-00 are not specified in available product information.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my master cylinder needs this gasket replaced?\u003c\/strong\u003e A worn or damaged gasket on a Model 60 master cylinder can lead to fluid seepage at the mating surface; replacing it with Dexter part 068-091-00 restores the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 068-091-00 the part number I should search for at checkout?\u003c\/strong\u003e Yes, 068-091-00 is the Dexter part number to reference when ordering this Model 60 master cylinder gasket.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257886939,"sku":"DEX-068-091-00","price":2.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-091-00__12036.1780061499.500.750.jpg?v=1785329084"},{"product_id":"master-cylinder-cover-for-model-60-actuator-plated-steel-replacement-cap-mpn-068-093-00","title":"Dexter Master Cylinder Cover, Model 60, Plated Finish - Part 068-093-00","description":"\u003cp\u003eThis is a genuine Dexter master cylinder cover, part number 068-093-00, built for the Dexter Model 60 master cylinder. It seals the top of the master cylinder reservoir, keeping brake fluid contained and protected from contamination while allowing the internal diaphragm to do its job as fluid level changes during brake operation. The cover carries a plated finish, which helps it resist corrosion in the wet, splash-prone environment typical of trailer brake systems near axles and wheels.\u003c\/p\u003e\u003cp\u003eAt 0.2 pounds, this is a small, simple replacement part meant for anyone servicing or rebuilding a Dexter Model 60 master cylinder assembly. Ordering the correct cover by its Dexter part number ensures a proper fit on the Model 60 housing rather than guessing with a generic or universal cover.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-093-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Master Cylinder Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Dexter part 068-093-00?\u003c\/strong\u003e Dexter part 068-093-00 is a master cylinder cover for the Dexter Model 60 master cylinder, which fits over the reservoir to keep brake fluid contained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich master cylinder does this cover fit?\u003c\/strong\u003e This cover, Dexter part 068-093-00, is designed for the Dexter Model 60 master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the cover weigh?\u003c\/strong\u003e The Dexter 068-093-00 master cylinder cover weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the cover have?\u003c\/strong\u003e It has a plated finish, which helps the Dexter 068-093-00 cover resist corrosion in the wet conditions common around trailer brake components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, 068-093-00 is a genuine Dexter master cylinder cover, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a master cylinder cover do?\u003c\/strong\u003e On the Dexter Model 60 master cylinder, the cover 068-093-00 seals the top of the fluid reservoir, protecting the brake fluid from contamination while accommodating fluid level changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know I am ordering the right cover?\u003c\/strong\u003e Match the Dexter part number 068-093-00 to your existing Model 60 master cylinder to be sure the replacement cover fits correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cover include a gasket or diaphragm?\u003c\/strong\u003e This listing is for the master cylinder cover itself, Dexter part 068-093-00; a separate gasket or diaphragm is not specified as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this cover on a non-Dexter master cylinder?\u003c\/strong\u003e The 068-093-00 cover is made to fit the Dexter Model 60 master cylinder, so fit on other brands is not confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the cover straightforward?\u003c\/strong\u003e Yes, the Dexter 068-093-00 cover is a direct-fit replacement that installs onto the Model 60 master cylinder reservoir in place of the original cover.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257985243,"sku":"DEX-068-093-00","price":9.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-093-00__50249.1780061499.500.750.jpg?v=1785329087"},{"product_id":"titan-model-10-bolt-on-drum-brake-actuator-2-5-16-ball-12-500-lb-gvwr-zinc-plated-mpn-068-104-00","title":"Dexter Model 10 Drum Brake Actuator, Bolt-On 2.313 Inch Drop, 2-5\/16 Inch Ball, 068-104-00","description":"\u003cp\u003eThe Dexter Model 10 Drum Brake Actuator (068-104-00) is a bolt-on drum brake actuator built with a 2.313 inch drop and a zinc plated finish for corrosion resistance. It is designed to work with a 2-5\/16 inch ball coupler and is rated for 12,500 pounds GVWR with an 800 pound tongue load capacity, making it suited to heavier single and tandem axle trailers that use surge (hydraulic) drum brakes.\u003c\/p\u003e\u003cp\u003eMounting holes are spaced on 3 inch and 5 inch centers front to back, matching the standard Model 10 bolt pattern for straightforward installation onto compatible trailer tongues. The zinc plating protects the actuator housing from rust and road salt exposure, extending service life in wet trailering conditions. This actuator functions as the surge brake mechanism that converts the trailer's forward push against the tow vehicle into hydraulic pressure applied to the drum brakes, providing reliable stopping power when towing at or near the rated capacity.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-104-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Drum Brake Actuator, Model 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e 2.313 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Ball Size:\u003c\/strong\u003e 2-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Capacity (GVWR):\u003c\/strong\u003e 12,500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTongue Load Rating:\u003c\/strong\u003e 800 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing:\u003c\/strong\u003e 3 inches and 5 inches, front to back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 55.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-104-00 actuator rated for?\u003c\/strong\u003e The Dexter Model 10 Drum Brake Actuator (068-104-00) is rated for 12,500 pounds GVWR with an 800 pound tongue load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size ball coupler does this actuator use?\u003c\/strong\u003e This actuator is built for a 2-5\/16 inch ball coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 068-104-00 actuator weigh?\u003c\/strong\u003e The Dexter 068-104-00 Model 10 actuator weighs 55.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the drop measurement on this actuator?\u003c\/strong\u003e The Model 10 actuator has a 2.313 inch drop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Dexter Model 10 actuator mounted?\u003c\/strong\u003e It is a bolt-on actuator with mounting holes spaced on 3 inch and 5 inch centers, front to back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish protects this actuator from corrosion?\u003c\/strong\u003e The 068-104-00 actuator has a zinc plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter Model 10 actuator compatible with drum brakes?\u003c\/strong\u003e Yes, this is a drum brake actuator designed to actuate hydraulic surge drum brakes on a trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer brake system uses this actuator?\u003c\/strong\u003e The 068-104-00 is a surge brake actuator, which converts the trailer's forward momentum against the tow vehicle into hydraulic pressure for the drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this actuator include the coupler and safety chains?\u003c\/strong\u003e The 068-104-00 listing covers the Model 10 drum brake actuator unit itself, built around a 2-5\/16 inch ball coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trailer weight range is this actuator suited for?\u003c\/strong\u003e With a 12,500 pound GVWR and 800 pound tongue load rating, the Dexter Model 10 actuator suits heavier single and tandem axle trailers with hydraulic drum brakes.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258050779,"sku":"DEX-068-104-00","price":924.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-2478100_lg__68927.1558114286.500.750.jpg?v=1785188591"},{"product_id":"dexter-model-60-hydraulic-brake-actuator-7-000-lb-lever-lock-coupler-for-disc-brakes-with-solenoid-and-cover-mpn-068-196-05","title":"Dexter Model 60 Hydraulic Brake Actuator, 7,000 lb Disc Brake, Lever Lock, Plated, Solenoid and Cover, Part 068-196-05","description":"\u003cp\u003eThe Dexter Model 60 hydraulic brake actuator is rated for a 7,000 pound capacity and is configured for disc brake systems, making it a common choice for boat trailers and other trailered equipment using disc brakes. This unit includes the lever lock feature, which lets the operator lock out the actuator's surge function to prevent unwanted brake activation while backing the trailer up. It has a plated finish for corrosion resistance, and this version comes complete with the breakaway solenoid and protective cover included, so the actuator arrives ready to be installed as a complete assembly rather than requiring the solenoid to be sourced separately. As a Dexter part, it is identified by the manufacturer part number 068-196-05.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-196-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type Compatibility:\u003c\/strong\u003e Disc brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Type:\u003c\/strong\u003e Lever lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Solenoid and cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Model 60 actuator rated for?\u003c\/strong\u003e The Dexter Model 60 hydraulic brake actuator, part number 068-196-05, is rated for a 7,000 pound capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator for disc or drum brakes?\u003c\/strong\u003e This Dexter Model 60 actuator (068-196-05) is configured for disc brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the actuator include the solenoid?\u003c\/strong\u003e Yes, this version of the Dexter Model 60 actuator, part 068-196-05, includes the breakaway solenoid and a protective cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the lever lock feature do?\u003c\/strong\u003e The lever lock on the Dexter Model 60 actuator lets the operator manually lock out the actuator's surge function, which prevents the brakes from engaging while backing the trailer up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this actuator weigh?\u003c\/strong\u003e The Dexter Model 60 actuator, part number 068-196-05, weighs 21.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, this is a genuine Dexter Model 60 actuator identified by Dexter manufacturer part number 068-196-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the actuator have?\u003c\/strong\u003e This Dexter Model 60 actuator has a plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat model of Dexter actuator is this?\u003c\/strong\u003e This is the Dexter Model 60 hydraulic brake actuator, part number 068-196-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part 068-196-05?\u003c\/strong\u003e Part 068-196-05 is a complete Dexter Model 60 actuator assembly that includes the lever lock feature, solenoid, and cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a cover included with this actuator?\u003c\/strong\u003e Yes, the protective cover is included with this Dexter Model 60 actuator, part 068-196-05.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258116315,"sku":"DEX-068-196-05","price":443.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-196-05__53655.1780061500.500.750.jpg?v=1785329088"},{"product_id":"dexter-068-350-00-orifice-connector-0-016-1-8-mnpt-to-3-16-inverted-flare-brake-line-fitting","title":"Dexter Orifice Connector 0.016, 1\/8 Inch MNPT to 3\/16 Inch Inverted Flare Female, Trailer Drum Brake Fitting","description":"\u003cp\u003eThis Dexter orifice connector is a hydraulic fitting used in trailer drum brake systems to regulate brake fluid flow between the brake actuator and the wheel brake lines. It features a 0.016 inch orifice that meters fluid delivery, along with a 1\/8 inch MNPT (male national pipe thread) connection on one end and a 3\/16 inch female inverted flare fitting on the other. This combination allows the connector to join a pipe-threaded fluid line to a standard 3\/16 inch inverted-flare brake line, a common configuration in trailer surge brake and hydraulic brake plumbing.\u003c\/p\u003e\u003cp\u003eThe orifice connector is a small, precisely sized fitting designed to maintain consistent brake performance by controlling the rate of fluid flow through the line. It is intended for use as a direct replacement or repair component when servicing trailer brake hydraulic lines. Its compact size and light weight make it easy to install in tight spaces along the trailer frame or near the axle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-350-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Orifice Connector 0.016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection 1:\u003c\/strong\u003e 1\/8 inch MNPT (male national pipe thread)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection 2:\u003c\/strong\u003e 3\/16 inch female inverted flare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrifice Size:\u003c\/strong\u003e 0.016 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-350-00 orifice connector used for?\u003c\/strong\u003e The Dexter 068-350-00 is a hydraulic fitting used in trailer drum brake systems to control the rate of brake fluid flow between brake lines, connecting a 1\/8 inch MNPT threaded line to a 3\/16 inch inverted flare line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size orifice does this connector have?\u003c\/strong\u003e This connector has a 0.016 inch orifice, which meters the fluid flow through the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread and fitting types does the 068-350-00 use?\u003c\/strong\u003e One end is 1\/8 inch MNPT (male national pipe thread) and the other end is a 3\/16 inch female inverted flare fitting, allowing it to join two different brake line connection types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter orifice connector weigh?\u003c\/strong\u003e The Dexter 068-350-00 orifice connector weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this connector compatible with standard trailer surge brake systems?\u003c\/strong\u003e Yes, the 1\/8 inch MNPT to 3\/16 inch inverted flare configuration is a common connection type used in trailer surge and hydraulic drum brake plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 068-350-00 be used as a replacement part?\u003c\/strong\u003e Yes, this Dexter orifice connector is designed for use as a replacement or repair fitting when servicing trailer drum brake hydraulic lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the orifice connector come with any additional hardware?\u003c\/strong\u003e The Dexter 068-350-00 is sold as a single fitting; no additional hardware is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a trailer brake line need an orifice connector?\u003c\/strong\u003e An orifice connector like the Dexter 068-350-00 meters brake fluid flow through the line, which helps maintain consistent, controlled brake actuation in the trailer's hydraulic system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 068-350-00 a genuine Dexter part?\u003c\/strong\u003e Yes, the 068-350-00 is manufactured by Dexter as part number 068-350-00.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258149083,"sku":"DEX-068-350-00","price":7.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-1209800_lg__72774.1558140413.500.750.jpg?v=1785329089"},{"product_id":"dexter-068-213-00-backup-solenoid-valve-and-hardware-kit-for-disc-brake-trailer-actuators","title":"Dexter Backup Solenoid Valve 068-213-00 for Disc Brake Actuators","description":"\u003cp\u003eThe Dexter Backup Solenoid Valve, part number 068-213-00, is a backup solenoid valve built for disc brake actuators on trailers. It functions as a lockout valve within the actuator's hydraulic circuit, and is supplied as part of a kit that includes the valve along with its associated hardware. This component is intended for use with disc brake actuator systems that rely on a solenoid-controlled backup valve to manage hydraulic pressure during reverse operation.\u003c\/p\u003e\u003cp\u003eThe valve is a compact, lightweight component at 0.46 pounds, making it straightforward to handle during service or replacement work on a trailer's brake actuator assembly. It is identified by UPC 876983015092 for easy verification when ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-213-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Backup Solenoid Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Disc Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983015092\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-213-00 backup solenoid valve used for?\u003c\/strong\u003e Part number 068-213-00 is a backup solenoid valve used within a trailer's disc brake actuator system to control the hydraulic circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this valve come with mounting hardware?\u003c\/strong\u003e Yes, the 068-213-00 backup solenoid valve is supplied as a kit that includes the valve along with its associated hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter backup solenoid valve weigh?\u003c\/strong\u003e The 068-213-00 backup solenoid valve weighs 0.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 068-213-00 valve compatible with all trailer brake actuators?\u003c\/strong\u003e Compatibility should be confirmed against your specific disc brake actuator model, as fitment details beyond the disc brake actuator application are not specified for part 068-213-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 068-213-00?\u003c\/strong\u003e Part number 068-213-00 is manufactured under the Dexter brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a solenoid-type or manual backup valve?\u003c\/strong\u003e The 068-213-00 is a solenoid-controlled backup valve, not a manually operated valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with this part?\u003c\/strong\u003e The Dexter 068-213-00 backup solenoid valve carries UPC 876983015092.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this valve be used as a replacement part?\u003c\/strong\u003e The 068-213-00 backup solenoid valve is designed for use as a component of a disc brake actuator, suitable for replacement of the backup valve within that system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 068-213-00 kit?\u003c\/strong\u003e The kit for part 068-213-00 includes the backup solenoid valve itself along with the hardware needed to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 068-213-00 valve heavy or bulky to install?\u003c\/strong\u003e At 0.46 pounds, the 068-213-00 backup solenoid valve is a small, lightweight component, making it easy to handle during installation.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258181851,"sku":"DEX-068-213-00","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-4748800_lg__20058.1558114635.500.750.jpg?v=1785188509"},{"product_id":"diaphragm-filler-cap-for-model-60-hydraulic-trailer-brake-actuator-master-cylinder-cap-with-gasket-aero-7500","title":"Dexter Diaphragm Filler Cap 068-147-00 for Model 60 Aero 7500 Trailer Brake Actuator","description":"\u003cp\u003eThe Dexter diaphragm filler cap, part number 068-147-00, is the reservoir cap used on Model 60 Aero 7500 trailer brake actuators. It seals the top of the hydraulic actuator's fluid reservoir while the internal diaphragm flexes to accommodate normal changes in brake fluid level as the actuator cycles, helping keep the reservoir sealed against contamination and moisture. This is a small, lightweight component at just 0.04 pounds, sized to fit the compact reservoir opening on the Model 60 Aero 7500 actuator housing. Because the filler cap and its diaphragm are wear items exposed to fluid, heat, and repeated actuation cycles, they can crack, harden, or lose their seal over time, which allows moisture and debris into the reservoir or lets fluid weep past the cap. Replacing a worn or damaged cap with the correct part restores a proper seal on the reservoir without needing to replace the entire actuator. This cap is intended specifically for use on Model 60 Aero 7500 trailer brake actuators.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-147-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Model:\u003c\/strong\u003e Model 60 Aero 7500 Trailer Brake Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Diaphragm Filler Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 1.5 x 1.5 x 1 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eModel 60 Aero 7500 Trailer Brake Actuator\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-147-00 filler cap used for?\u003c\/strong\u003e It is the diaphragm filler cap that seals the fluid reservoir on a Model 60 Aero 7500 trailer brake actuator, allowing the diaphragm to flex with normal fluid level changes while keeping contamination out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap fit Titan Model 60 trailer brake actuators?\u003c\/strong\u003e Yes, part number 068-147-00 is designed to fit Model 60 Aero 7500 trailer brake actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the replacement filler cap?\u003c\/strong\u003e The 068-147-00 cap measures 1.5 x 1.5 x 1 inches, a compact size matched to the Model 60 Aero 7500 reservoir opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the filler cap weigh?\u003c\/strong\u003e The Dexter 068-147-00 diaphragm filler cap weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part or an aftermarket copy?\u003c\/strong\u003e Part number 068-147-00 is the Dexter part number for this diaphragm filler cap, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the diaphragm inside the cap actually do?\u003c\/strong\u003e The diaphragm in the 068-147-00 filler cap flexes to accommodate normal fluid level changes in the Model 60 Aero 7500 actuator's reservoir while keeping the reservoir sealed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my actuator's filler cap needs replacing?\u003c\/strong\u003e A cracked, hardened, or leaking diaphragm cap on a Model 60 Aero 7500 actuator will let fluid weep past the seal or allow moisture into the reservoir, both signs that the 068-147-00 cap should be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap be used on other actuator models besides the Model 60 Aero 7500?\u003c\/strong\u003e Part number 068-147-00 is specified for the Model 60 Aero 7500 trailer brake actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 068-147-00 cap seal the reservoir opening completely?\u003c\/strong\u003e Yes, the diaphragm filler cap seals the top of the Model 60 Aero 7500 reservoir while its internal diaphragm allows for fluid expansion and contraction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would a trailer brake actuator need a new filler cap instead of a full actuator replacement?\u003c\/strong\u003e If only the diaphragm filler cap on a Model 60 Aero 7500 actuator has failed, replacing the 068-147-00 cap restores the reservoir seal without replacing the entire actuator assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258214619,"sku":"DEX-068-147-00","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4480701__87041.1722495044.500.750.jpg?v=1785188533"},{"product_id":"model-60-breakaway-cable-assembly-with-hook-surge-actuator-breakaway-kit-mpn-068-188-00","title":"Dexter 068-188-00 Breakaway Cable Assembly with Hook for Model 60 Surge Actuators","description":"\u003cp\u003eThe Dexter 068-188-00 Breakaway Cable Assembly is a replacement breakaway cable and carabiner clasp assembly built for Model 60 surge actuators. If a trailer separates from its towing vehicle while underway, this breakaway cable pulls free and activates the trailer's brakes automatically, helping prevent a runaway trailer. The assembly includes one breakaway cable and one carabiner clasp with hook, ready to attach to the actuator; all other actuator components are sold separately.\u003c\/p\u003e\u003cp\u003eConstruction is durable steel with a zinc-plated finish for corrosion resistance in wet, road-salt, and marine-adjacent towing environments. The cable and hook are sized to work with Model 60 surge actuators, making this a straightforward swap when an existing breakaway cable is frayed, stretched, corroded, or missing its hook. At 0.46 pounds, it is a lightweight, low-cost safety component that is easy to keep as a spare in a tow vehicle or trailer parts kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-188-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Breakaway Cable Assembly, Model 60 W\/ Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e 1 breakaway cable assembly, 1 carabiner clasp with hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuator Model:\u003c\/strong\u003e Model 60 surge actuator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eModel 60 surge actuators\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter 068-188-00 breakaway cable assembly do?\u003c\/strong\u003e It connects a trailer's surge actuator to the tow vehicle so that if the trailer disconnects while towing, the cable pulls free and activates the trailer's brakes, helping bring it to a stop safely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich actuator does this breakaway cable assembly fit?\u003c\/strong\u003e The Dexter 068-188-00 is built for Model 60 surge actuators and is sized to match that actuator's breakaway cable and clasp mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part number 068-188-00?\u003c\/strong\u003e The assembly includes one breakaway cable and one carabiner clasp with hook. All other actuator parts, such as the actuator body itself, are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the breakaway cable made from?\u003c\/strong\u003e It is made of durable steel with a zinc-plated finish, which resists corrosion during regular exposure to moisture and road conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter breakaway cable assembly weigh?\u003c\/strong\u003e The 068-188-00 breakaway cable assembly weighs 0.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part or an aftermarket copy?\u003c\/strong\u003e Part number 068-188-00 is a genuine Dexter breakaway cable assembly, not a generic aftermarket substitute, so it matches the fit and hardware of the original Model 60 actuator cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this breakaway cable myself?\u003c\/strong\u003e Yes, the 068-188-00 assembly is designed as a direct swap for a worn or missing breakaway cable on a Model 60 surge actuator, attaching via the included carabiner clasp and hook without needing to replace the entire actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replace the whole surge actuator or just the cable?\u003c\/strong\u003e This part replaces only the breakaway cable and carabiner clasp with hook on a Model 60 surge actuator; it does not include the actuator housing or internal components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace my trailer's breakaway cable?\u003c\/strong\u003e Replace a breakaway cable assembly like the Dexter 068-188-00 if the existing cable is frayed, stretched, rusted, or the hook or clasp is bent or missing, since a damaged cable may fail to trigger the trailer brakes in an emergency.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the carabiner clasp attached to the cable or sold separately?\u003c\/strong\u003e The carabiner clasp and hook come attached as part of the same 068-188-00 assembly, so no separate purchase is needed for the clasp.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258247387,"sku":"DEX-068-188-00","price":26.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-4623800_lg__37503.1558114528.500.750.jpg?v=1785188016"},{"product_id":"dexter-solenoid-shield-068-415-01-fits-model-10-model-20-actuators-replaces-titan-4836100183-zinc-plated","title":"Dexter Solenoid Shield 068-415-01 for Model 10 and Model 20 Actuators, Zinc Plated, Replaces Titan","description":"\u003cp\u003eThe Dexter Solenoid Shield, part number 068-415-01, is a replacement cover component for Dexter Model 10 and Model 20 hydraulic brake actuators. This shield fits over the actuator's solenoid to protect it from road debris, moisture, and impact during towing, helping the actuator operate reliably over time. It is finished in zinc plating for corrosion resistance in the wet, salt-exposed conditions common to trailer and marine towing applications.\u003c\/p\u003e\u003cp\u003eThis solenoid shield is designed as a direct-fit replacement part for Dexter Model 10 and Model 20 actuator assemblies, and it also serves as a replacement equivalent for Titan part number making it a useful option for owners of Titan-equipped actuators seeking a compatible replacement. Installation involves removing the worn or damaged shield from the actuator body and securing the new zinc-plated shield in its place, restoring protection to the solenoid without requiring replacement of the full actuator unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-415-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Solenoid Shield\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Model 10 and Model 20 Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDexter Model 10 Actuators\u003c\/li\u003e\n\u003cli\u003eDexter Model 20 Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTitan \u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter 068-415-01 solenoid shield fit?\u003c\/strong\u003e It is designed for Dexter Model 10 and Model 20 hydraulic brake actuators, covering and protecting the actuator's solenoid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this shield a genuine Dexter part?\u003c\/strong\u003e Yes, part number 068-415-01 is a genuine Dexter component, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 068-415-01 replace a Titan part?\u003c\/strong\u003e Yes, it replaces Titan part number so it can be used as a compatible substitute on actuators that originally used that Titan shield.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the solenoid shield made of or finished with?\u003c\/strong\u003e The 068-415-01 shield has a zinc-plated finish, which resists corrosion in wet and salt-exposed towing environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter solenoid shield weigh?\u003c\/strong\u003e It weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a solenoid shield actually do on a brake actuator?\u003c\/strong\u003e On a Dexter Model 10 or Model 20 actuator, the solenoid shield covers the solenoid to protect it from road debris, moisture, and impact during towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 068-415-01 shield myself?\u003c\/strong\u003e Installation involves removing the old or damaged shield from the Model 10 or Model 20 actuator body and fastening the new zinc-plated 068-415-01 shield in its place; no full actuator replacement is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this shield work on a Model 30 or other Dexter actuator?\u003c\/strong\u003e Part 068-415-01 is specified for Model 10 and Model 20 actuators; fitment to other Dexter actuator models is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the solenoid shield instead of the whole actuator?\u003c\/strong\u003e If only the shield is worn, cracked, or missing on a Model 10 or Model 20 actuator, replacing the 068-415-01 shield restores solenoid protection without the cost of a full actuator replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 068-415-01 shield include mounting hardware?\u003c\/strong\u003e The listing covers the solenoid shield itself, part number 068-415-01; hardware inclusion is not specified in the available product information.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258312923,"sku":"DEX-068-415-01","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-068-415-01-Shield-1__02239.1739477438.500.750.jpg?v=1785329091"},{"product_id":"dexter-068-467-00-copper-orifice-gasket-for-trailer-brake-actuators-0-81-in-od","title":"Dexter Copper Gasket for Trailer Brake Actuator Orifice, 0.81 in. O.D. X 0.510 in. I.D. X 0.032 in., Part 068-467-00","description":"\u003cp\u003eThis copper gasket from Dexter is designed to seal the orifice fitting on a trailer brake actuator, providing a reliable metal-to-metal seal at the connection point. Copper construction allows the gasket to compress slightly under torque, filling minor surface imperfections to prevent hydraulic fluid leaks at the orifice joint. It measures 0.81 inch outer diameter by 0.510 inch inner diameter by 0.032 inch thick, sized specifically for the orifice fitting used on Dexter trailer brake actuators. As a wear item, this gasket should be replaced any time the orifice fitting is removed or serviced, since a reused gasket may not compress evenly and can result in a fluid leak. Part number 068-467-00 identifies this gasket for ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-467-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 0.81 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter:\u003c\/strong\u003e 0.510 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.032 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trailer brake actuator orifice seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is this gasket used for?\u003c\/strong\u003e Dexter part 068-467-00 is a copper gasket that seals the orifice fitting on a trailer brake actuator, preventing hydraulic fluid from leaking at that connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 068-467-00 gasket?\u003c\/strong\u003e It measures 0.81 inch outer diameter, 0.510 inch inner diameter, and 0.032 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the gasket made of?\u003c\/strong\u003e Copper. The soft metal compresses under torque to form a tight seal against minor surface imperfections on the orifice fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace this gasket every time I remove the orifice fitting?\u003c\/strong\u003e Yes. A copper gasket like the Dexter 068-467-00 should be replaced whenever the orifice fitting is removed, since a reused gasket may not seal evenly and can lead to a fluid leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 068-467-00 is a Dexter branded gasket, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in an order?\u003c\/strong\u003e This listing is for a single copper gasket, part 068-467-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gasket fit any trailer brake actuator?\u003c\/strong\u003e It is sized for the orifice fitting used on Dexter trailer brake actuators; confirm your actuator uses the same 0.81 in. O.D. X 0.510 in. I.D. Orifice fitting before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this gasket be reused after removal?\u003c\/strong\u003e No. Once a copper gasket like the 068-467-00 has been compressed and removed, it should be discarded and replaced with a new one to maintain a proper seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools are needed to install this gasket?\u003c\/strong\u003e Installing the 068-467-00 gasket only requires removing and re-torquing the orifice fitting on the brake actuator; no special tools are needed beyond a standard wrench for the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is copper used instead of rubber for this seal?\u003c\/strong\u003e Copper is used because it can withstand the pressure and fluid exposure at the brake actuator orifice fitting while deforming slightly to seal, unlike rubber which can degrade from brake fluid over time.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258378459,"sku":"DEX-068-467-00","price":1.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-0774500_lg__90211.1558140168.500.750.jpg?v=1785329083"},{"product_id":"3-16-in-brake-line-tube-clip-plastic-mpn-071-a57-00","title":"Dexter 3\/16 Inch Plastic Brake Line Tube Clip - 071-A57-00","description":"\u003cp\u003eThe Dexter 3\/16 Inch Plastic Brake Line Tube Clip (part number 071-A57-00) is a small plastic clip designed to secure 3\/16 inch brake line tubing in place, keeping the line organized and protected from vibration, rubbing, and movement during travel. Its plastic construction is lightweight and resistant to corrosion, making it a practical choice for holding brake line runs along a chassis or frame. At just 0.01 pounds, this is a compact hardware component intended to be used alongside 3\/16 inch brake line tubing as part of a complete brake line installation or repair.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 071-A57-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Size:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake line does the Dexter 071-A57-00 clip fit?\u003c\/strong\u003e The Dexter 071-A57-00 tube clip is sized for 3\/16 inch brake line tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this tube clip made from?\u003c\/strong\u003e This clip, Dexter part number 071-A57-00, is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 071-A57-00 tube clip weigh?\u003c\/strong\u003e It weighs 0.01 pounds, reflecting its small, lightweight plastic design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of a brake line tube clip like this one?\u003c\/strong\u003e A tube clip such as the Dexter 071-A57-00 is used to hold 3\/16 inch brake line tubing securely in place along a mounting surface, preventing the line from shifting or rubbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill plastic tube clips corrode over time?\u003c\/strong\u003e No, the plastic construction of the Dexter 071-A57-00 clip will not rust or corrode the way a metal clip could.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 071-A57-00 a genuine Dexter part?\u003c\/strong\u003e Yes, 071-A57-00 is the Dexter manufacturer part number for this plastic 3\/16 inch brake line tube clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this clip include mounting hardware?\u003c\/strong\u003e The listing for the Dexter 071-A57-00 tube clip covers the clip itself; no additional mounting hardware is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this clip be used for brake line sizes other than 3\/16 inch?\u003c\/strong\u003e The Dexter 071-A57-00 clip is designed specifically for 3\/16 inch tubing and is not specified for other tube sizes.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258411227,"sku":"DEX-071-A57-00","price":1.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-071-A57-00__49031.1777391190.500.750.jpg?v=1785329080"},{"product_id":"brass-union-fitting-3-16-to-3-16-inverted-flare-connector-mpn-071-a73-00","title":"Dexter Brass Union Fitting 3\/16 Inch to 3\/16 Inch Inverted Flare, Part 071-A73-00","description":"\u003cp\u003eThis Dexter brass union fitting, part number 071-A73-00, joins two 3\/16 inch inverted flare lines into a single continuous run. It is machined from brass, a material chosen for fuel and fluid line fittings because it resists corrosion from moisture and fuel exposure while holding a tight seal under vibration. The union uses a symmetrical inverted flare design on both ends, so it connects two lengths of 3\/16 inch inverted-flare tubing or hose without requiring a change in fitting type. Typical uses include extending, splicing, or repairing a damaged section of fuel or brake line where a clean, leak-resistant joint is needed. Because both ends match, the fitting can be installed in either orientation. At 0.01 pounds, it is a small, lightweight component intended to be paired with the appropriate flare nuts and matching 3\/16 inch inverted-flare tubing for a proper connection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 071-A73-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Union\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 1 Connection:\u003c\/strong\u003e 3\/16 inch inverted flare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd 2 Connection:\u003c\/strong\u003e 3\/16 inch inverted flare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter 071-A73-00 union fitting connect?\u003c\/strong\u003e It joins two 3\/16 inch inverted flare lines together, since both ends of the 071-A73-00 use the same 3\/16 inch inverted flare connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fitting made of brass?\u003c\/strong\u003e Yes, the Dexter 071-A73-00 union fitting is made of brass, which resists corrosion from fuel and moisture while maintaining a tight seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 071-A73-00 have a direction it must be installed in?\u003c\/strong\u003e No, both ends of the Dexter 071-A73-00 are the same 3\/16 inch inverted flare connection, so it can be installed in either orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this fitting weigh?\u003c\/strong\u003e The Dexter 071-A73-00 brass union fitting weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size line does the Dexter 071-A73-00 fit?\u003c\/strong\u003e It is sized for 3\/16 inch inverted flare tubing or hose on both sides of the union.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fitting be used to repair a damaged fuel or brake line?\u003c\/strong\u003e Yes, splicing in the Dexter 071-A73-00 union is a common way to repair or extend a 3\/16 inch inverted flare line without replacing the entire run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need flare nuts to use this fitting?\u003c\/strong\u003e Yes, the Dexter 071-A73-00 union requires matching 3\/16 inch inverted flare nuts on the connecting lines to form a complete, sealed joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 071-A73-00?\u003c\/strong\u003e The Dexter 071-A73-00 is sold as the brass union fitting itself; matching flare nuts and tubing are separate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 071-A73-00 a genuine Dexter part?\u003c\/strong\u003e Yes, 071-A73-00 is the Dexter manufacturer part number for this brass union fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this union be used on both fuel and brake lines?\u003c\/strong\u003e The brass construction and 3\/16 inch inverted flare ends of the Dexter 071-A73-00 make it suitable for connecting 3\/16 inch inverted-flare fuel or brake lines.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258443995,"sku":"DEX-071-A73-00","price":7.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-071-A73-00__04105.1780061499.500.750.jpg?v=1785329083"},{"product_id":"dexter-model-10-bolt-on-surge-brake-actuator-2-313-drop-plated-disc-brake-068-506-20","title":"Dexter Model 10 Trailer Brake Actuator, Bolt-On, 2.313 Inch Drop Coupler, Plated Disc Brake Actuator, Part 068-506-20","description":"\u003cp\u003eThe Dexter Model 10 actuator is a bolt-on trailer brake actuator built for disc brake trailer systems. It features a 2.313 inch coupler in a drop configuration, designed to mount directly to the trailer tongue and provide the coupling point between the tow vehicle and the trailer's hydraulic disc brake line. The actuator carries a plated finish for corrosion resistance in the outdoor and roadside conditions trailer hardware is regularly exposed to.\u003c\/p\u003e\u003cp\u003eAs part of the Dexter Model 10 actuator line, this unit is identified by part number 068-506-20 and is built for disc (S\u0026amp;C) brake applications rather than drum brake setups. Its bolt-on mounting style allows it to be installed onto compatible trailer tongues without welding, making it a straightforward component for new trailer builds or actuator replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-506-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Model 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Bolt-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Size:\u003c\/strong\u003e 2.313 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Style:\u003c\/strong\u003e Drop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Disc (S\u0026amp;C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 56.55 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Model 10 actuator, part 068-506-20, used for?\u003c\/strong\u003e It is a bolt-on trailer brake actuator built for disc brake trailer systems, providing the coupling and mounting point between the tow vehicle hitch and the trailer's brake line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size coupler does this actuator use?\u003c\/strong\u003e The Dexter 068-506-20 actuator uses a 2.313 inch coupler in a drop configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 068-506-20 actuator bolt-on or weld-on?\u003c\/strong\u003e It is a bolt-on unit, so it mounts to a compatible trailer tongue with hardware rather than requiring welding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this actuator work with disc brakes or drum brakes?\u003c\/strong\u003e The Dexter Model 10 actuator, part 068-506-20, is built for disc (S\u0026amp;C) brake applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-506-20 actuator weigh?\u003c\/strong\u003e It weighs 56.55 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Dexter Model 10 actuator have?\u003c\/strong\u003e It has a plated finish, which helps resist corrosion during outdoor and roadside use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 068-506-20 a genuine Dexter part number?\u003c\/strong\u003e Yes, 068-506-20 is the Dexter manufacturer part number for this Model 10 bolt-on actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the drop style on this actuator?\u003c\/strong\u003e The 068-506-20 actuator is built with a drop channel configuration for its 2.313 inch coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product line is the 068-506-20 actuator part of?\u003c\/strong\u003e It belongs to the Dexter Model 10 actuator line of trailer brake actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this actuator be used for a new trailer build or as a replacement?\u003c\/strong\u003e Its bolt-on design suits both new trailer builds and replacement of an existing Dexter Model 10 style actuator.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258476763,"sku":"DEX-068-506-20","price":940.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-4750610_lg__87876.1638289398.500.750.jpg?v=1785329088"},{"product_id":"master-cylinder-repair-kit-for-titan-model-60-disc-brake-trailer-actuators-mpn-071-b16-00","title":"Dexter Model 60 Disc Brake Master Cylinder Repair Kit 071-B16-00","description":"\u003cp\u003eThe Dexter Model 60 Disc Brake Master Cylinder Repair Kit (071-B16-00) restores the hydraulic master cylinder on Dexter Model 60 disc brake actuators used on boat trailers and other braked trailer axles. The master cylinder is the component inside the actuator that converts the mechanical force of the trailer coupler into hydraulic pressure, sending fluid to the disc brake calipers at each wheel. Over time the internal seals wear from repeated actuation and exposure to moisture, leading to a soft brake feel, fluid leaks, or inconsistent braking - this kit lets you rebuild the master cylinder rather than replace the entire actuator assembly. It is designed specifically for the Model 60 disc brake actuator and installs into the original actuator housing. Ordering by the exact part number 071-B16-00 ensures you get the correct kit for a Model 60 disc brake unit rather than a kit sized for a different actuator model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 071-B16-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuator Model:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Disc Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent:\u003c\/strong\u003e Master Cylinder Repair Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaged Dimensions:\u003c\/strong\u003e 1.1 x 0.9 x 0.7 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter 071-B16-00 kit repair?\u003c\/strong\u003e This kit rebuilds the master cylinder inside a Dexter Model 60 disc brake actuator, replacing the internal components that generate hydraulic pressure for the trailer's disc brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 071-B16-00 compatible with drum brake actuators?\u003c\/strong\u003e No, 071-B16-00 is built for the Dexter Model 60 disc brake actuator only and is not intended for drum brake master cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the repair kit weigh?\u003c\/strong\u003e The Dexter Model 60 master cylinder repair kit weighs 3.76 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this kit?\u003c\/strong\u003e The 071-B16-00 kit ships in a package measuring 1.1 x 0.9 x 0.7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace the whole actuator if the master cylinder is leaking?\u003c\/strong\u003e Not necessarily - the 071-B16-00 kit rebuilds just the master cylinder portion of a Dexter Model 60 disc brake actuator, so a leaking or worn master cylinder can often be repaired without replacing the entire actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 071-B16-00 is a genuine Dexter Model 60 master cylinder repair kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich actuator model does this kit fit?\u003c\/strong\u003e This repair kit is designed specifically for the Dexter Model 60 disc brake actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake system is this kit for?\u003c\/strong\u003e 071-B16-00 is designed for disc brake systems, not drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my trailer's master cylinder needs this repair kit?\u003c\/strong\u003e Signs that a Model 60 disc brake actuator's master cylinder needs rebuilding include a soft or spongy brake feel, visible fluid leaks at the actuator, or inconsistent braking at the trailer wheels - the 071-B16-00 kit addresses these issues by rebuilding the master cylinder.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258575067,"sku":"DEX-071-B16-00","price":126.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-4820000_lg__05773.1722482044.500.750.jpg?v=1785188784"},{"product_id":"dexter-model-60-brake-actuator-for-drum-brakes-mpn-099-175-00-trailer-coupler-actuator","title":"Dexter Model 60 Actuator Drum, Trailer Brake Actuator, Part 099-175-00","description":"\u003cp\u003eThe Dexter 099-175-00 is a Model 60 actuator drum, a replacement component for trailer brake actuator assemblies. It is designed as a direct-fit replacement drum for Dexter Model 60 hydraulic surge brake actuators used on boat and utility trailers, restoring proper actuator function when the original drum has worn out or been damaged. The actuator drum is a wear item within the surge brake system, and replacing it as part of routine trailer brake maintenance helps keep the actuator operating correctly and the trailer braking safely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-175-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Model 60 Actuator Drum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 975017160001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 099-175-00?\u003c\/strong\u003e It is a Model 60 actuator drum, a Dexter trailer brake actuator component identified by part number 099-175-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this actuator drum weigh?\u003c\/strong\u003e The Dexter Model 60 actuator drum (099-175-00) weighs 17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 099-175-00 is a Dexter-branded Model 60 actuator drum, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is this?\u003c\/strong\u003e Dexter lists the 099-175-00 under trailer brake actuators, specifically as a Model 60 actuator drum component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Dexter Model 60 actuator drum, part 099-175-00, is 975017160001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the part number 099-175-00 ever change?\u003c\/strong\u003e No, 099-175-00 is the fixed Dexter part number for this Model 60 actuator drum and should be used to confirm you are ordering the correct component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace an actuator drum?\u003c\/strong\u003e An actuator drum such as the Dexter 099-175-00 is a wear component inside the trailer brake actuator, so it is replaced when it becomes worn or damaged to keep the Model 60 actuator functioning properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 099-175-00 sold as a standalone drum or a full actuator assembly?\u003c\/strong\u003e The 099-175-00 is listed as the Model 60 actuator drum component itself, not a complete actuator assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258738907,"sku":"DEX-099-175-00","price":368.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/70522__39856.1722511730.500.750.jpg?v=1785329087"},{"product_id":"dexter-071-b55-00-tandem-axle-brake-tubing-kit-for-trailer-hydraulic-brake-lines","title":"Dexter Brake Tubing Kit for Tandem Axle Trailers, Part Number 071-B55-00","description":"\u003cp\u003eThe Dexter Brake Tubing Kit, part number 071-B55-00, is a complete brake line tubing set designed for tandem axle trailer brake systems. This kit supplies the tubing needed to connect the trailer's brake actuator or master cylinder to the brake assemblies on both axles, making it a practical solution for building out or replacing a tandem axle hydraulic brake line run. Using a factory-matched tubing kit rather than fabricating brake lines from bulk stock helps ensure the lengths and configuration are correct for a tandem axle setup, reducing the risk of leaks, kinks, or improperly routed lines that can compromise trailer braking performance.\u003c\/p\u003e\u003cp\u003eThis kit is sold under the Dexter brand and is intended for trailer owners, fabricators, and service technicians performing new brake line installations or full brake line replacements on tandem axle trailers. The kit weighs 4.2 pounds as supplied.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 071-B55-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Brake Tubing Kit, Tandem Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 071-B55-00 brake tubing kit used for?\u003c\/strong\u003e It is a brake tubing kit designed to supply the brake lines needed for a tandem axle trailer brake system, part number 071-B55-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit made for tandem axle trailers specifically?\u003c\/strong\u003e Yes, the 071-B55-00 kit is designated by Dexter as a tandem axle brake tubing kit, meaning it is sized and configured for a two-axle trailer brake line run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the brake tubing kit weigh?\u003c\/strong\u003e The Dexter Brake Tubing Kit, part number 071-B55-00, weighs 4.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes this brake tubing kit?\u003c\/strong\u003e This kit is manufactured by Dexter, identified by part number 071-B55-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on a single axle trailer?\u003c\/strong\u003e The 071-B55-00 kit is designated for tandem axle applications, so a single axle trailer would require a different tubing kit sized for that configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include fittings along with the tubing?\u003c\/strong\u003e The specific contents beyond the tubing itself are not detailed in the available product information for part number 071-B55-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this Dexter brake tubing kit?\u003c\/strong\u003e The part number is 071-B55-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part or an aftermarket copy?\u003c\/strong\u003e This is a genuine Dexter part, sold under Dexter's own part number 071-B55-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tubing kit be used to replace worn or leaking brake lines?\u003c\/strong\u003e Yes, the 071-B55-00 kit is intended to supply tubing for a tandem axle trailer brake system, which makes it suitable for replacing existing brake lines on that type of setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs professional installation required for this tubing kit?\u003c\/strong\u003e Brake line installation involves proper routing, sealing, and bleeding of the hydraulic system, so installation of the 071-B55-00 kit should be performed by someone familiar with trailer brake systems.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258771675,"sku":"DEX-071-B55-00","price":245.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-071-B55-00_0__43003.1780061502.500.750.jpg?v=1785329083"},{"product_id":"model-60-master-cylinder-repair-kit-37-fits-titan-dico-model-60-and-aero-7500-surge-actuators-equivalent-to-4395100","title":"Dexter Model 60 Master Cylinder Repair Kit for Drum Brake Surge Actuators - 071-A98-00","description":"\u003cp\u003eThe Dexter Model 60 M\/C Repair Kit (071-A98-00) is a master cylinder repair kit built to service drum brake surge actuators on boat and utility trailers. It is designed for use with Titan and Dico Model 60 Actuators and Aero 7500 Actuators, restoring hydraulic brake function without requiring replacement of the entire actuator housing. The kit includes the master cylinder, filler cap, orifice fitting, and mounting hardware needed to rebuild the actuator's hydraulic circuit; all other actuator parts are sold separately.\u003c\/p\u003e\u003cp\u003eConstruction is zinc-plated steel, chosen for corrosion resistance in the wet, salt-exposed environment typical of trailer brake actuators. This makes the kit a practical choice for trailer owners maintaining surge brake systems that have developed weak, spongy, or non-functional braking due to a worn or leaking master cylinder. The kit weighs 2 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 071-A98-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Master cylinder, filler cap, orifice fitting, hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuators:\u003c\/strong\u003e Titan and Dico Model 60 Actuators, Aero 7500 Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTitan and Dico Model 60 Actuators\u003c\/li\u003e\n\u003cli\u003eAero 7500 Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter 071-A98-00 master cylinder kit include?\u003c\/strong\u003e The kit includes a master cylinder, filler cap, orifice fitting, and mounting hardware. All other actuator parts are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators is this master cylinder kit designed for?\u003c\/strong\u003e It is designed for use with Titan and Dico Model 60 Actuators and Aero 7500 Actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete surge actuator replacement?\u003c\/strong\u003e No, part number 071-A98-00 is a master cylinder repair kit for rebuilding the hydraulic portion of a Model 60 or Aero 7500 actuator, not a full actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the master cylinder kit made from?\u003c\/strong\u003e The 071-A98-00 kit is made of zinc-plated steel for corrosion resistance in wet, marine trailer environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the master cylinder kit weigh?\u003c\/strong\u003e The Dexter 071-A98-00 kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with a filler cap?\u003c\/strong\u003e Yes, a filler cap is included along with the master cylinder, orifice fitting, and hardware in kit 071-A98-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit a Dico Model 60 actuator?\u003c\/strong\u003e Yes, the 071-A98-00 master cylinder kit is designated for use with Dico Model 60 Actuators as well as Titan Model 60 and Aero 7500 Actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an orifice fitting included in this repair kit?\u003c\/strong\u003e An orifice fitting is included in the Dexter 071-A98-00 master cylinder repair kit, along with the master cylinder, filler cap, and hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brakes is this master cylinder kit intended for?\u003c\/strong\u003e This kit is intended for trailer drum brake systems that use Model 60 or Aero 7500 surge actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting hardware pieces included with the master cylinder?\u003c\/strong\u003e Yes, hardware for installing the master cylinder is included in kit 071-A98-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is corrosion resistance important for this part?\u003c\/strong\u003e Trailer brake actuators are frequently exposed to water and road salt during boat launching, so the zinc-plated steel construction of the 071-A98-00 kit helps resist corrosion in that environment.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258837211,"sku":"DEX-071-A98-00","price":134.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-071-A98-00__80586.1763741537.500.750.jpg?v=1785188437"},{"product_id":"dexter-xr-84-disc-brake-trailer-actuator-inner-member-with-solenoid-mpn-099-184-20","title":"Dexter XR-84 Inner Member Trailer Disc Brake Actuator with Solenoid - 099-184-20","description":"\u003cp\u003eThe Dexter 099-184-20 is the inner member component for a disc brake trailer actuator, designed to pair with the Dexter XR-84 outer member. This inner member includes a built-in solenoid and is configured specifically for disc brake applications. As an inner member, it is a replacement or service component rather than a complete standalone actuator assembly, intended for trailer owners and service shops rebuilding or servicing a Dexter XR-84 disc brake actuator. The part is identified by Dexter's own part numbering system as part number 099-184-20, ensuring buyers can match it precisely against their existing XR-84 actuator setup. It falls within Dexter's Trailer Brake Actuators product category and ships as an individual service component.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-184-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e XR-84 Inner Member, Disc, w\/ Solenoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outer Member:\u003c\/strong\u003e XR-84\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Disc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 099-184-20 inner member used for?\u003c\/strong\u003e It is the inner member component of a Dexter disc brake trailer actuator, designed to be paired with the Dexter XR-84 outer member as part of a complete actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 099-184-20 inner member include a solenoid?\u003c\/strong\u003e Yes, the Dexter 099-184-20 XR-84 inner member ships with an integrated solenoid as part of the component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer member does part number 099-184-20 pair with?\u003c\/strong\u003e The 099-184-20 inner member is designated to pair with the Dexter XR-84 outer member.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 099-184-20 weigh?\u003c\/strong\u003e The Dexter XR-84 inner member, part number 099-184-20, weighs 15.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 099-184-20 a complete brake actuator or just a component?\u003c\/strong\u003e Part number 099-184-20 is the inner member component only, not a complete standalone actuator assembly; it is intended to be used with a matching XR-84 outer member.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake type is the Dexter XR-84 inner member designed for?\u003c\/strong\u003e The 099-184-20 inner member is configured for disc brake applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 099-184-20 a genuine Dexter part?\u003c\/strong\u003e Yes, 099-184-20 is Dexter's own manufacturer part number for this XR-84 inner member with solenoid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for the XR-84 inner member with solenoid?\u003c\/strong\u003e The Dexter part number is 099-184-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does the 099-184-20 fall under?\u003c\/strong\u003e Dexter lists the 099-184-20 inner member under its Trailer Brake Actuators category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 099-184-20 be used with outer members other than the XR-84?\u003c\/strong\u003e The 099-184-20 is specifically designated as the inner member for the Dexter XR-84 outer member; it is named and configured for that pairing.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258902747,"sku":"DEX-099-184-20","price":387.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Replacement-UFP-Legacy-XR84-Single-Tandem-8400K_2-inch-Axle-Disc-Brake-Actuator__12071.1747363797.500.750.jpg?v=1785329093"},{"product_id":"dexter-brakerite-ehb-1500-psi-electric-hydraulic-trailer-brake-actuator-box-kit-for-disc-brakes-k68-001-00","title":"Dexter K68-001-00 EHB 1500 PSI Brake Actuator Box Kit for Disc Brakes","description":"\u003cp\u003eThe Dexter K68-001-00 is an EHB (electric-hydraulic brake) actuator box kit engineered for trailers equipped with disc brakes. This actuator kit generates hydraulic pressure up to 1500 PSI, converting an electric brake signal from the tow vehicle into hydraulic force at the trailer's disc brake calipers. It is housed in a protective box enclosure designed for mounting on the trailer tongue, keeping the actuator components shielded from road debris and moisture during towing.\u003c\/p\u003e\u003cp\u003eAs a Dexter-brand component, the K68-001-00 is built for trailer braking systems that rely on disc brakes rather than drum brakes, making it a fit for boat trailers, utility trailers, and other disc-brake-equipped towables that use an electric-hydraulic actuation setup. The box kit format is intended to simplify installation by housing the core actuator hardware in a single enclosed unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K68-001-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e EHB (Electric-Hydraulic Brake) Actuator Box Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Application:\u003c\/strong\u003e Disc Brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hydraulic Pressure:\u003c\/strong\u003e 1500 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327601210\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K68-001-00 used for?\u003c\/strong\u003e The Dexter K68-001-00 is an EHB (electric-hydraulic brake) actuator box kit that converts an electric brake signal from the tow vehicle into hydraulic pressure for a trailer's disc brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K68-001-00 work with drum brakes?\u003c\/strong\u003e No. The Dexter K68-001-00 is built for disc brake applications, not drum brake trailer systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum pressure of this actuator?\u003c\/strong\u003e The Dexter K68-001-00 actuator box kit is rated for hydraulic pressure up to 1500 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K68-001-00 actuator kit weigh?\u003c\/strong\u003e The Dexter K68-001-00 weighs 11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K68-001-00 a complete kit or an individual part?\u003c\/strong\u003e It is sold as a box kit, meaning the core actuator hardware is housed together in a single enclosed unit rather than as a bare individual component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does EHB mean on the Dexter K68-001-00?\u003c\/strong\u003e EHB stands for electric-hydraulic brake, describing how the K68-001-00 actuator translates an electric brake input into hydraulic braking force at the trailer's disc brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K68-001-00 genuine Dexter equipment?\u003c\/strong\u003e Yes, the K68-001-00 is a genuine Dexter part identified by its manufacturer part number K68-001-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the K68-001-00 actuator box mounted on a trailer?\u003c\/strong\u003e The K68-001-00 is a box-style actuator kit designed to enclose and protect the actuator hardware, consistent with tongue-mounted trailer brake actuator installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Dexter K68-001-00?\u003c\/strong\u003e The Dexter K68-001-00 EHB brake actuator box kit carries UPC 840327601210.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K68-001-00 be used on boat trailers?\u003c\/strong\u003e The Dexter K68-001-00 is suited to trailers using disc brakes with electric-hydraulic actuation, which includes many boat trailer brake setups.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262245083,"sku":"DEX-K68-001-00","price":1455.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-BrakeRite-Electric-Hydraulic-Disc-Brake-Actuator-Kit__34189.1722499258.500.750.jpg?v=1785329085"},{"product_id":"marine-reverse-lock-out-solenoid-12v-trailer-disc-drum-brake-actuator-lockout","title":"Dexter Reverse Lockout Solenoid K68-539-00 for Boat Trailer Disc and Drum Brakes","description":"\u003cp\u003eThe Dexter Reverse Lockout Solenoid (K68-539-00) is installed at the brake actuator on a boat trailer to allow normal backing up without engaging the trailer's surge brakes. It is intended for actuators that do not already have a built-in reverse lockout lever or switch. Once wired in, the solenoid disengages the brake actuator's hydraulic function while the tow vehicle is in reverse, then automatically restores normal braking when driving forward again. This makes it a straightforward add-on for trailer owners whose actuator lacks a mechanical lockout mechanism.\u003c\/p\u003e\u003cp\u003eThe solenoid is a 12 volt electrical component that connects into the trailer's reverse-light circuit and the brake actuator. It is compatible with disc brake actuators, which require a reverse lockout device, and can also be used on drum brake setups. The housing has a painted exterior finish for corrosion resistance in a marine trailer environment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K68-539-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Reverse lockout solenoid for brake actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Brake Types:\u003c\/strong\u003e Disc brakes (required); also usable on drum brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7 x 4.75 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.58 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983010073\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e81103\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K68-539-00 reverse lockout solenoid do?\u003c\/strong\u003e It disengages a trailer's brake actuator while backing up, so the surge brakes do not drag or lock while the tow vehicle is in reverse, then restores normal braking when moving forward again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need this solenoid if my actuator already has a reverse lockout lever?\u003c\/strong\u003e No. The K68-539-00 is meant for actuators that do not have a built-in reverse lockout lever or switch; if the actuator already has that mechanical feature, a separate solenoid is not needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K68-539-00 be used with disc brakes?\u003c\/strong\u003e Yes, disc brake actuators require a reverse lockout device such as the K68-539-00 if they lack a built-in lockout lever or switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this solenoid work on drum brakes too?\u003c\/strong\u003e Yes, the Dexter K68-539-00 can also be used on trailers equipped with drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the K68-539-00 solenoid?\u003c\/strong\u003e It is a 12 volt solenoid, matching standard trailer electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of this solenoid?\u003c\/strong\u003e The K68-539-00 measures 7 x 4.75 x 2 inches and weighs 0.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a cross-reference number for the K68-539-00?\u003c\/strong\u003e Yes, the Dexter K68-539-00 cross-references to part number 81103.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the solenoid know when the trailer is in reverse?\u003c\/strong\u003e It is wired into the reverse circuit at the brake actuator, so it activates automatically whenever the tow vehicle shifts into reverse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the K68-539-00 housing have?\u003c\/strong\u003e The solenoid housing has a painted exterior finish suited to a marine trailer environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K68-539-00 sold as a complete kit?\u003c\/strong\u003e The K68-539-00 is the solenoid unit itself, which is installed at the brake actuator as part of the reverse lockout wiring.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262474459,"sku":"DEX-K68-539-00","price":69.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81103__63043.1739462859.500.750.jpg?v=1785188310"},{"product_id":"left-hand-wheel-cylinder-k71-130-00-for-titan-10-12-uni-servo-hydraulic-trailer-drum-brakes","title":"Dexter K71-130-00 Left Hand Wheel Cylinder Assembly for 10 and 12 Inch Uni-Servo Trailer Brakes","description":"\u003cp\u003eThe Dexter K71-130-00 is a left hand wheel cylinder assembly built for 10 inch and 12 inch Uni-Servo trailer drum brakes. As the hydraulic actuator inside the brake assembly, the wheel cylinder converts brake fluid pressure from the trailer's hydraulic line into the mechanical force that pushes the brake shoes outward against the drum. This is the left hand (left side) version of the assembly; the right hand wheel cylinder is a separate part with its own part number, so confirm you are ordering the correct side before installing.\u003c\/p\u003e\u003cp\u003eThe cylinder body is constructed of aluminum, keeping the assembly lightweight while resisting corrosion in the wet, salt-exposed conditions common to boat trailers and other towed equipment. It is designed as a direct fit for Dexter Uni-Servo drum brake systems in the 10 inch and 12 inch sizes, restoring proper brake actuation when the original wheel cylinder is leaking, seized, or worn. Replacing a failing wheel cylinder promptly helps prevent brake fluid loss, uneven braking, and further wear on the shoes and drum.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-130-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Brake Sizes:\u003c\/strong\u003e 10 inch and 12 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Uni-Servo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Dexter 10 inch and 12 inch Uni-Servo trailer drum brake assemblies, left hand side only.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-130-00 wheel cylinder used for?\u003c\/strong\u003e It is the hydraulic actuator that pushes the brake shoes outward against the drum on Dexter Uni-Servo trailer brakes, and the K71-130-00 is the left hand side version of this assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the left or right side wheel cylinder?\u003c\/strong\u003e The K71-130-00 is the left hand wheel cylinder assembly. The right hand version is a different Dexter part number, so check which side needs replacement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake sizes does the K71-130-00 fit?\u003c\/strong\u003e This wheel cylinder assembly is built for 10 inch and 12 inch Uni-Servo trailer drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wheel cylinder body made of?\u003c\/strong\u003e The K71-130-00 wheel cylinder has an aluminum body, which resists corrosion in wet and salt-exposed trailering environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-130-00 weigh?\u003c\/strong\u003e This Dexter wheel cylinder assembly weighs 0.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my wheel cylinder needs replacing?\u003c\/strong\u003e Signs of a failing wheel cylinder include visible brake fluid leaking at the wheel, a spongy or low brake pedal, or uneven braking, all of which point to replacing the wheel cylinder such as the Dexter K71-130-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, the K71-130-00 is a genuine Dexter wheel cylinder assembly, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-130-00 come as a complete assembly?\u003c\/strong\u003e Yes, it is sold as a complete left hand wheel cylinder assembly ready to install into the Uni-Servo brake backing plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on a boat trailer?\u003c\/strong\u003e Yes, the Dexter K71-130-00 aluminum wheel cylinder is commonly used on boat trailers and other towed equipment fitted with 10 inch or 12 inch Uni-Servo drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace both the left and right wheel cylinders at the same time?\u003c\/strong\u003e It is generally good practice to replace wheel cylinders in pairs so braking force stays balanced side to side, but the K71-130-00 itself is sold as the left hand unit only.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263228123,"sku":"DEX-K71-130-00","price":54.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41t9radcGUL.jpg?v=1784498550"},{"product_id":"right-hand-wheel-cylinder-assembly-for-10-12-uni-servo-hydraulic-trailer-drum-brakes-mpn-k71-131-00","title":"Dexter K71-131-00 Right Hand Wheel Cylinder Assembly, Aluminum, Fits 10 Inch and 12 Inch Uni-Servo Trailer Drum Brakes","description":"\u003cp\u003eThe Dexter K71-131-00 is a right hand wheel cylinder assembly built for trailer drum brake systems using uni-servo brake actuation. It is machined from aluminum for corrosion resistance in wet, road-salt, and marine-trailer environments where steel cylinders are prone to rust and seizing. This cylinder is sized to work with both 10 inch and 12 inch uni-servo drum brake assemblies, making it a common replacement part for trailers using this brake configuration.\u003c\/p\u003e\u003cp\u003eThis is a right-side-specific part. The internal piston and actuating linkage of a uni-servo wheel cylinder are oriented for one side of the axle, so this K71-131-00 assembly is designed for right hand (right wheel) installation only. A separate left hand cylinder is required for the opposite side of the trailer; do not install this part on the left wheel position.\u003c\/p\u003e\u003cp\u003eThe assembly is supplied as a complete unit, allowing installers to replace a worn, leaking, or seized cylinder without sourcing individual internal components separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-131-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wheel Cylinder Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Side:\u003c\/strong\u003e Right Hand (right wheel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Brake Size:\u003c\/strong\u003e 10 inch and 12 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Uni-Servo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983015153\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich side does the Dexter K71-131-00 fit?\u003c\/strong\u003e The K71-131-00 is a right hand wheel cylinder, meaning it is built for right wheel (right side) installation only. It should not be installed on the left side of the trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a left hand version of this wheel cylinder?\u003c\/strong\u003e Yes, the left side of the axle uses a separate wheel cylinder with a different part number. The K71-131-00 covers the right hand position only, so be sure to order the correct side for your trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake drum sizes is the K71-131-00 compatible with?\u003c\/strong\u003e This wheel cylinder is designed to work with both 10 inch and 12 inch uni-servo drum brake assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the K71-131-00 made of?\u003c\/strong\u003e It is constructed from aluminum, which resists corrosion better than steel in wet or road-salt exposure, common with trailer brake components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake system does this cylinder work with?\u003c\/strong\u003e The K71-131-00 is made for uni-servo drum brake systems, a common actuation design used on 10 inch and 12 inch trailer drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-131-00 weigh?\u003c\/strong\u003e The K71-131-00 wheel cylinder assembly weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-131-00 come as a complete assembly?\u003c\/strong\u003e Yes, the K71-131-00 ships as a complete wheel cylinder assembly rather than individual internal components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-131-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-131-00 is the Dexter manufacturer part number for this right hand wheel cylinder assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Dexter K71-131-00 right hand wheel cylinder is 876983015153.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this wheel cylinder be used on both 10 inch and 12 inch brakes on the same trailer?\u003c\/strong\u003e The K71-131-00 is rated for use on either 10 inch or 12 inch uni-servo drum brakes, so it can be used wherever that brake size and side position applies on a given axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263293659,"sku":"DEX-K71-131-00","price":54.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41372nM1z7L.jpg?v=1784498558"},{"product_id":"dexter-k71-758-00-shock-absorber-replacement-kit-for-a-60-a-75-a-84-ac-84-and-xr-84-trailer-brake-actuators","title":"Dexter Shock Absorber Replacement Kit K71-758-00 for A-60, A-75, A-84, AC-84, XR-84 Trailer Brake Actuators","description":"\u003cp\u003eThe Dexter Shock Absorber Replacement Kit K71-758-00 is a replacement shock absorber assembly designed for use with Dexter surge brake actuators, including the A-60, A-75, A-84, AC-84, and XR-84 models. The shock absorber is a core internal component of a surge brake actuator, cushioning the coupler assembly as it compresses during braking and returns to position when braking pressure is released. Over time and repeated towing cycles, the factory shock absorber can wear out, weaken, or fail, leading to harsh or inconsistent surge braking performance, excessive coupler play, or a soft, unresponsive brake actuator feel. Replacing the shock absorber restores the smooth, controlled compression and rebound the surge actuator relies on to apply the trailer brakes proportionally to towing loads.\u003c\/p\u003e\u003cp\u003eThis kit is intended for trailer owners and service technicians performing routine actuator maintenance or troubleshooting surge brake performance issues on trailers equipped with compatible Dexter actuator models. Installation involves accessing the internal actuator housing and swapping the worn shock absorber for the replacement unit, restoring the actuator to proper working condition without the cost of a full actuator replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-758-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shock Absorber Replacement Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuator Models:\u003c\/strong\u003e A-60, A-75, A-84, AC-84, XR-84\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 846983005614\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Dexter A-60, A-75, A-84, AC-84, and XR-84 surge brake actuators.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-758-00 shock absorber kit used for?\u003c\/strong\u003e The K71-758-00 is a replacement shock absorber kit for Dexter surge brake actuators, restoring the cushioning action that applies the trailer brakes as the coupler compresses under towing load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich actuator models does K71-758-00 fit?\u003c\/strong\u003e This shock absorber kit is compatible with the Dexter A-60, A-75, A-84, AC-84, and XR-84 surge brake actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-758-00 kit weigh?\u003c\/strong\u003e The Dexter K71-758-00 shock absorber replacement kit weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same as the factory-installed shock absorber?\u003c\/strong\u003e Yes, K71-758-00 is the Dexter replacement shock absorber kit made to restore the actuator to its original surge braking performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the signs a trailer actuator shock absorber needs replacing?\u003c\/strong\u003e Harsh or inconsistent surge braking, excessive play in the coupler assembly, or a soft, unresponsive actuator feel are common signs the shock absorber inside a Dexter surge actuator has worn out and needs a K71-758-00 replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I replace the shock absorber myself?\u003c\/strong\u003e The K71-758-00 kit is designed for servicing the internal shock absorber of compatible Dexter actuators, and installation is typically performed by accessing the actuator housing and swapping in the replacement unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include everything needed for the repair?\u003c\/strong\u003e The K71-758-00 is supplied as a shock absorber replacement kit for Dexter A-60, A-75, A-84, AC-84, and XR-84 actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K71-758-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-758-00 is a genuine Dexter manufacturer part number for the shock absorber replacement kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is K71-758-00?\u003c\/strong\u003e K71-758-00 is categorized as a trailer brake actuator component, specifically the shock absorber replacement kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on any surge brake actuator?\u003c\/strong\u003e No, the K71-758-00 shock absorber kit is specifically designed for the Dexter A-60, A-75, A-84, AC-84, and XR-84 actuator models.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263621339,"sku":"DEX-K71-758-00","price":65.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Brake-Actuator-Shock-Absorber-Spring-Kit-K71-758-00-with-spring-bushing-and-installation-bolt-for-Titan-UFP-brake-actuators__75589.1747363798.500.750.jpg?v=1785329091"},{"product_id":"ufp-by-dexter-k71-757-00-master-cylinder-kit-for-disc-brake-actuators-all-models","title":"UFP By Dexter Master Cylinder Replacement Kit K71-757-00 for Disc Brake Actuators, All Models","description":"\u003cp\u003eThis is the UFP By Dexter Master Cylinder Replacement Kit, part number K71-757-00, built to restore hydraulic braking function in disc brake actuators. The kit centers on an aluminum master cylinder designed for UFP disc actuator assemblies, giving trailer owners a direct way to replace a worn, leaking, or failed master cylinder without sourcing a full new actuator. Each kit is packaged as a single replacement unit (package quantity of 1), making it a straightforward drop-in service part for maintenance or repair work on disc brake actuator systems.\u003c\/p\u003e\u003cp\u003eThe master cylinder is the core component that converts mechanical force from the actuator into hydraulic pressure sent to the trailer's disc brake calipers, so a compromised unit can lead to soft, spongy, or unresponsive brakes. Replacing it with this kit restores proper hydraulic pressure and pedal\/actuator feel. The aluminum construction is used specifically for UFP actuator applications, and the kit is designated for use across all UFP disc brake actuator models, simplifying parts ordering for anyone servicing UFP-equipped trailers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e UFP By Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-757-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e K71-757\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8.25 x 3.5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Disc brake actuators, all models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983005604\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUFP disc brake actuators, all models\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the K71-757-00 master cylinder kit fit?\u003c\/strong\u003e The K71-757-00 kit is designated for all UFP disc brake actuator models, making it a broad-fit replacement master cylinder for UFP-equipped trailer actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in this kit?\u003c\/strong\u003e The kit includes one aluminum master cylinder built for UFP actuators, packaged as a single replacement unit (package quantity of 1) under part number K71-757-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the master cylinder in K71-757-00 made of aluminum?\u003c\/strong\u003e Yes, the master cylinder in the K71-757-00 kit is aluminum, matching the material used in the original UFP actuator master cylinders it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the K71-757-00 kit?\u003c\/strong\u003e The K71-757-00 Master Cylinder Replacement Kit measures 8.25 x 3.5 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-757-00 master cylinder kit weigh?\u003c\/strong\u003e This kit weighs 2.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine UFP By Dexter part?\u003c\/strong\u003e Yes, K71-757-00 is a genuine UFP By Dexter part, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this replace my original UFP master cylinder?\u003c\/strong\u003e K71-757-00 is designed as a direct replacement master cylinder for UFP disc brake actuators across all models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signs indicate I need to replace my master cylinder with this kit?\u003c\/strong\u003e Soft, spongy, or unresponsive trailer brakes can indicate a failing master cylinder, and the K71-757-00 kit provides the replacement aluminum master cylinder needed to restore hydraulic pressure in UFP disc brake actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes K71-757-00 fit disc brakes only or also drum brakes?\u003c\/strong\u003e K71-757-00 is a master cylinder kit for disc brake actuators; it is not designated for drum brake actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many master cylinders come in the K71-757-00 kit?\u003c\/strong\u003e The K71-757-00 kit contains one master cylinder (package quantity of 1).\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263654107,"sku":"DEX-K71-757-00","price":181.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K71-757-00-Disc-Brake-Master-Cylinder-Replacement-Kit__55502.1739477124.500.750.jpg?v=1785188019"},{"product_id":"dexter-k71-b18-00-single-axle-trailer-brake-line-kit-standard","title":"Dexter Single Axle Brake Line Kit, Standard, K71-B18-00","description":"\u003cp\u003eThe Dexter K71-B18-00 is a standard single axle brake line kit designed for trailer brake actuator systems. It provides the hydraulic brake line components needed to connect a trailer's brake actuator to a single axle's brake assemblies, giving trailer owners a complete solution for replacing worn, damaged, or corroded brake lines. Maintaining intact, leak-free brake lines is essential for reliable hydraulic brake performance on boat trailers, utility trailers, and other single axle applications.\u003c\/p\u003e\u003cp\u003eThis kit is built for trailers with a single axle configuration and is sold under the Dexter brand, a recognized manufacturer of trailer running gear and brake components. Replacing a full brake line kit rather than patching individual sections helps ensure consistent line condition throughout the system, reducing the risk of future leaks or pressure loss at multiple points.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-B18-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Single Axle Brake Line Kit, Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.99 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983016211\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Configuration:\u003c\/strong\u003e Single axle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-B18-00 brake line kit used for?\u003c\/strong\u003e The Dexter K71-B18-00 is a standard brake line kit that supplies the hydraulic brake lines needed to connect a trailer's brake actuator to the brakes on a single axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many axles does the K71-B18-00 kit cover?\u003c\/strong\u003e This kit, K71-B18-00, is designed for single axle trailers, not tandem or multi-axle configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-B18-00 weigh?\u003c\/strong\u003e The kit weighs 2.99 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the K71-B18-00 brake line kit?\u003c\/strong\u003e It is manufactured by Dexter, a supplier of trailer running gear and brake components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-B18-00?\u003c\/strong\u003e The UPC for this Dexter brake line kit is 876983016211.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-B18-00 a standard or heavy-duty brake line kit?\u003c\/strong\u003e The K71-B18-00 is listed as a Standard single axle brake line kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-B18-00 kit include all the brake lines for one axle?\u003c\/strong\u003e Yes, this is a complete single axle brake line kit intended to outfit the brake lines for one axle's worth of trailer brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the K71-B18-00?\u003c\/strong\u003e The Dexter K71-B18-00 falls under trailer brake actuator components, specifically the brake line kit that runs from the actuator to the axle's brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K71-B18-00 be used to replace corroded or leaking brake lines?\u003c\/strong\u003e Yes, the K71-B18-00 kit is suited for replacing worn, damaged, or corroded brake lines on a single axle trailer brake system.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264047323,"sku":"DEX-K71-B18-00","price":207.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-1087100_lg__77598.1558114803.500.750.jpg?v=1785329091"},{"product_id":"flexible-hydraulic-brake-line-kit-3-16-in-x-24-in-for-boat-trailer-surge-brakes-mpn-k71-g00-40","title":"Dexter Brake Line Kit K71-G00-40 - Flexible 3\/16 x 24 Inch Brass Trailer Brake Hose","description":"\u003cp\u003eThe Dexter K71-G00-40 is a flexible brake line kit built for trailer brake systems, including boat trailer brake setups where a hydraulic connection needs to flex with axle and suspension movement. The line measures 3\/16 inch in diameter by 24 inches in length and is constructed of brass, a material chosen for its corrosion resistance in wet and road-salt environments and its ability to hold up under sustained hydraulic pressure. It is rated for a maximum working pressure of 3000 pounds per square inch, well above typical trailer brake system operating pressures, giving an added margin of safety.\u003c\/p\u003e\u003cp\u003eThis kit is sold as a single flexible line and is intended as a direct hydraulic connector between rigid brake line runs and the axle-mounted brake assembly, or between the trailer frame and a swiveling hub, where a rigid line would crack or fatigue from repeated flex. Because it is brass rather than a rubber-jacketed hose, it resists collapsing under vacuum and holds its shape under pressure cycling, which is important for consistent trailer brake feel and stopping performance. The 24 inch length accommodates typical axle travel and mounting offsets on boat and utility trailers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G00-40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure Rating:\u003c\/strong\u003e 3000 pounds per square inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.66 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter K71-G00-40 brake line?\u003c\/strong\u003e It measures 3\/16 inch in diameter by 24 inches in length, sized for trailer brake system connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the K71-G00-40 brake line made of?\u003c\/strong\u003e Brass. The brass construction resists corrosion in wet, road-salt, and marine trailer environments better than an unprotected steel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much pressure can this brake line handle?\u003c\/strong\u003e Up to 3000 pounds per square inch, which is well above the operating pressure of a typical trailer hydraulic brake system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K71-G00-40 a rigid or flexible brake line?\u003c\/strong\u003e Flexible. It is designed to connect rigid brake line runs to an axle or hub assembly that moves with suspension travel, where a rigid line would crack over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G00-40 brake line weigh?\u003c\/strong\u003e 0.66 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brake lines come in the K71-G00-40 kit?\u003c\/strong\u003e One. It is packaged and sold as a single flexible brake line, not a multi-pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the K71-G00-40 brake line used for?\u003c\/strong\u003e It is used as a flexible hydraulic connector in trailer brake systems, commonly on boat and utility trailers, linking the frame-mounted brake line to the axle or hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this brake line fit any trailer brake system?\u003c\/strong\u003e The Dexter K71-G00-40 is a 3\/16 inch by 24 inch brass flexible line intended for standard trailer hydraulic brake plumbing; confirm your existing line diameter and length match before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the brass construction affect brake line durability?\u003c\/strong\u003e Yes. Brass resists the corrosion and pitting that a plain steel line develops from road salt and water exposure, which helps the K71-G00-40 maintain a reliable seal over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K71-G00-40 replace a cracked or leaking flexible brake line?\u003c\/strong\u003e Yes, it is designed as a direct flexible brake line replacement for trailer brake systems using a 3\/16 inch by 24 inch line.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264440539,"sku":"DEX-K71-G00-40","price":60.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-81099_large__68147.1558175881.500.750.jpg?v=1785188991"},{"product_id":"dexter-k71-g02-59-complete-tandem-axle-trailer-brake-line-kit","title":"Dexter Complete Tandem Brake Line Kit K71-G02-59 for Boat Trailers","description":"\u003cp\u003eThe Dexter K71-G02-59 is a complete brake line kit built for tandem-axle boat trailer brake systems. It is supplied as a single complete kit, giving trailer owners and service shops the full brake line assembly needed for a tandem-axle setup in one part number rather than sourcing individual line segments separately. This kit falls under Dexter's boat trailer brakes line, making it a fit for trailer owners maintaining or rebuilding the hydraulic brake lines on a tandem-axle boat trailer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-59\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Kit Brake Line Tandem Complete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Configuration:\u003c\/strong\u003e Tandem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983009602\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-G02-59?\u003c\/strong\u003e It is a complete brake line kit, sold under Dexter part number K71-G02-59, designed for tandem-axle boat trailer brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit for a single axle or tandem-axle trailer?\u003c\/strong\u003e The K71-G02-59 is a tandem brake line kit, built specifically for boat trailers with two axles rather than a single-axle setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include all the brake lines needed, or just a portion?\u003c\/strong\u003e It is sold as a complete kit, meaning the full brake line set for the tandem-axle system is included under this one part number, K71-G02-59.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Dexter K71-G02-59 brake line kit?\u003c\/strong\u003e The Dexter K71-G02-59 complete tandem brake line kit weighs 4.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the K71-G02-59?\u003c\/strong\u003e Dexter lists the K71-G02-59 under boat trailer brakes, specifically as a tandem brake line kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-G02-59?\u003c\/strong\u003e The UPC for the Dexter Kit Brake Line Tandem Complete, part number K71-G02-59, is 876983009602.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-G02-59 an original Dexter part?\u003c\/strong\u003e Yes, K71-G02-59 is the Dexter manufacturer part number for this complete tandem brake line kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho is the manufacturer of this brake line kit?\u003c\/strong\u003e This complete tandem brake line kit, part number K71-G02-59, is manufactured by Dexter.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265292507,"sku":"DEX-K71-G02-59","price":197.38,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-80328_large__65539.1722492407.500.750.jpg?v=1785329083"},{"product_id":"lever-lock-coupler-repair-kit-for-titan-model-60-surge-actuator-dexter-k74-326-00","title":"Dexter Lever Lock Coupler Repair Kit K74-326-00, Fits Titan Model 60 Surge Actuator","description":"\u003cp\u003eThe Dexter Lever Lock Coupler Repair Kit, part number K74-326-00, is designed to rebuild the lever-lock coupler mechanism on a Titan Model 60 surge actuator. Over time, the lever-lock components on a surge coupler wear from repeated hitching, unhitching, and towing cycles, and this kit provides the replacement parts needed to restore proper lock engagement without having to replace the entire actuator assembly. It is intended for boat trailer, utility trailer, and similar towing applications that use a Titan Model 60 surge brake actuator with a lever-lock style coupler.\u003c\/p\u003e\u003cp\u003eRepairing the coupler with a dedicated kit like this one helps maintain safe, secure hitch engagement, which is critical for surge brake actuators since the coupler lock is part of the system that allows the actuator to apply the trailer brakes correctly during towing. Using the correct kit for the Model 60 actuator ensures the replacement components match the original lever-lock design and function.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K74-326-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Lever Lock Coupler Repair Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Titan Model 60 Surge Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983016310\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTitan Model 60 surge actuator (lever-lock coupler)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K74-326-00 kit used for?\u003c\/strong\u003e The Dexter K74-326-00 is a lever lock coupler repair kit used to rebuild the coupler lock mechanism on a Titan Model 60 surge actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit my surge actuator?\u003c\/strong\u003e K74-326-00 is designed to fit the Titan Model 60 surge actuator with a lever-lock style coupler; it is not a universal fit for other actuator models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the repair kit weigh?\u003c\/strong\u003e The Dexter Lever Lock Coupler Repair Kit weighs 2.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this repair kit?\u003c\/strong\u003e This coupler repair kit is manufactured by Dexter under part number K74-326-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit replace the entire actuator?\u003c\/strong\u003e No, K74-326-00 repairs the lever-lock coupler components on an existing Titan Model 60 surge actuator rather than replacing the full actuator unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit specific to lever-lock couplers?\u003c\/strong\u003e Yes, the K74-326-00 kit is built specifically for the lever-lock coupler design used on the Titan Model 60 actuator, not other coupler styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signs indicate I need this repair kit?\u003c\/strong\u003e Difficulty locking or securing the coupler onto the ball, or a loose\/worn lever-lock mechanism on a Titan Model 60 surge actuator, are typical signs the K74-326-00 repair kit is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I find this part by its UPC?\u003c\/strong\u003e Yes, the Dexter Lever Lock Coupler Repair Kit K74-326-00 carries UPC 876983016310.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation something I can do myself?\u003c\/strong\u003e The K74-326-00 kit is intended to replace the worn lever-lock coupler components on a Titan Model 60 surge actuator, and installation follows standard actuator disassembly and reassembly steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM Dexter part?\u003c\/strong\u003e Yes, K74-326-00 is the Dexter manufacturer part number for this lever-lock coupler repair kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265685723,"sku":"DEX-K74-326-00","price":118.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4358400__63756.1737854836.500.750.jpg?v=1785188741"},{"product_id":"model-660-disc-brake-actuator-coupler-k99-066-20-trailer-surge-brake-coupler","title":"Dexter Model 660 Disc Brake Coupler for Trailer Brake Actuators","description":"\u003cp\u003eThe Dexter Model 660 Disc Brake Coupler is a trailer brake actuator coupler, part number K99-066-20, built for trailer disc brake actuator applications. It connects the tow vehicle hitch to the trailer's brake actuator system, transmitting the surge force that engages the trailer's disc brakes during towing and deceleration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K99-066-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Model 660 Disc Brake Coupler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983011056\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Model 660 Disc Brake Coupler used for?\u003c\/strong\u003e The Dexter Model 660 Disc Brake Coupler, part number K99-066-20, is a trailer brake actuator coupler used to connect the tow vehicle hitch to a trailer's disc brake actuator system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for the Dexter Model 660 Disc Brake Coupler?\u003c\/strong\u003e The manufacturer part number is K99-066-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter Model 660 Disc Brake Coupler weigh?\u003c\/strong\u003e It weighs 18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this Dexter part belong to?\u003c\/strong\u003e The Dexter Model 660 Disc Brake Coupler, K99-066-20, is listed under Trailer Brake Actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter Model 660 Disc Brake Coupler?\u003c\/strong\u003e The UPC is 876983011056.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter Model 660 Disc Brake Coupler a genuine Dexter part?\u003c\/strong\u003e Yes, this coupler, part number K99-066-20, is a genuine Dexter brand part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K99-066-20 coupler compatible with other Dexter Model 660 components?\u003c\/strong\u003e The K99-066-20 is designated by Dexter as the coupler for the Model 660 disc brake actuator line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures the Model 660 Disc Brake Coupler?\u003c\/strong\u003e Dexter manufactures the Model 660 Disc Brake Coupler, part number K99-066-20.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265718491,"sku":"DEX-K99-066-20","price":365.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-82400_large__26936.1558176192.500.750.jpg?v=1785329088"},{"product_id":"dexter-model-660-drum-brake-actuator-coupler-for-marine-trailers-mpn-k99-066-00","title":"Dexter Model 660 Drum Brake Actuator Coupler, Part K99-066-00","description":"\u003cp\u003eThe Dexter Model 660 Drum Brake Actuator Coupler (part number K99-066-00) is a drum brake actuator assembly built for trailer brake systems, including boat trailer applications. It functions as the coupler component that engages the trailer's hydraulic drum brake system when towing tension is applied, converting the surge force from braking into hydraulic pressure at the drum brakes. As a genuine Dexter part, it is intended as a direct replacement or service component for trailers using a Model 660 style drum brake actuator setup.\u003c\/p\u003e\u003cp\u003eThis actuator coupler is identified by the part number K99-066-00 and is cataloged under trailer brake actuators, making it straightforward to order the correct component for a drum brake service or rebuild. It weighs 17.77 pounds, reflecting the solid coupler and actuator housing construction typical of this class of trailer brake hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K99-066-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Model 660 Drum Brake Coupler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983011063\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K99-066-00 actuator used for?\u003c\/strong\u003e K99-066-00 is a Dexter Model 660 drum brake actuator coupler, used on trailers equipped with a hydraulic drum brake system to convert towing surge force into brake pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K99-066-00 a genuine Dexter part number?\u003c\/strong\u003e Yes, K99-066-00 is the manufacturer part number for the Dexter Model 660 Drum Brake Coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Model 660 Drum Brake Coupler weigh?\u003c\/strong\u003e The Dexter Model 660 Drum Brake Coupler (K99-066-00) weighs 17.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is K99-066-00?\u003c\/strong\u003e K99-066-00 is listed under trailer brake actuators, since it is the coupler component of a drum brake actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the UPC to verify I am ordering the correct part?\u003c\/strong\u003e Yes, the Dexter Model 660 Drum Brake Coupler carries UPC 876983011063, which can be used to confirm the correct part before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes K99-066-00 include the full actuator housing?\u003c\/strong\u003e K99-066-00 is the Model 660 Drum Brake Coupler assembly, the actuator coupler component of the trailer's drum brake system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this part specific to boat trailers only?\u003c\/strong\u003e The Dexter Model 660 Drum Brake Coupler (K99-066-00) is a trailer brake actuator component and is commonly used on trailers with drum brake systems, including boat trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part K99-066-00?\u003c\/strong\u003e Dexter manufactures part K99-066-00, the Model 660 Drum Brake Coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K99-066-00 a replacement or repair part?\u003c\/strong\u003e K99-066-00 functions as the drum brake actuator coupler and is used as a service or replacement component for trailers using a Model 660 style drum brake actuator.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265751259,"sku":"DEX-K99-066-00","price":327.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-82400_large_1__74452.1558176252.500.750.jpg?v=1785188438"},{"product_id":"dexter-model-850-disc-brake-coupler-mpn-k99-z85-20-trailer-brake-actuator","title":"Dexter Model 850 Disc Brake Coupler K99-Z85-20 Trailer Brake Actuator","description":"\u003cp\u003eThe Dexter Model 850 disc brake coupler, part number K99-Z85-20, is a trailer brake actuator component used to engage a trailer's disc brake system during towing. It is classified by Dexter within its Trailer Brake Actuators product line and is identified by UPC 876983011070. The coupler weighs 19.88 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K99-Z85-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 850\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983011070\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Model 850 disc brake coupler used for?\u003c\/strong\u003e The Dexter Model 850 disc brake coupler, part number K99-Z85-20, is a trailer brake actuator component used to engage a trailer's disc brake system when towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for the Dexter Model 850 coupler?\u003c\/strong\u003e K99-Z85-20 is the Dexter part number for the Model 850 disc brake coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter Model 850 coupler weigh?\u003c\/strong\u003e 19.88 pounds is the weight of the Dexter Model 850 disc brake coupler, K99-Z85-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter coupler?\u003c\/strong\u003e 876983011070 is the UPC assigned to the Dexter Model 850 disc brake coupler, K99-Z85-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K99-Z85-20 a genuine Dexter part?\u003c\/strong\u003e Yes, K99-Z85-20 is a Dexter-branded part, sold under Dexter's Model 850 product name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does the Dexter Model 850 coupler fall under?\u003c\/strong\u003e Dexter classifies the Model 850 coupler, K99-Z85-20, within its Trailer Brake Actuators category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 'Model 850' the same part as K99-Z85-20?\u003c\/strong\u003e Yes, Model 850 is Dexter's product name for the disc brake coupler identified by part number K99-Z85-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures this brake coupler?\u003c\/strong\u003e Dexter manufactures the Model 850 disc brake coupler, part number K99-Z85-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K99-Z85-20 coupler a complete unit or a component?\u003c\/strong\u003e The Dexter Model 850, K99-Z85-20, is sold as a disc brake coupler unit within Dexter's Trailer Brake Actuators line.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265882331,"sku":"DEX-K99-Z85-20","price":515.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-82402__73759.1737857510.500.750.jpg?v=1785329089"},{"product_id":"8-000-lb-bolt-on-hydraulic-drum-brake-actuator-for-boat-trailers-zinc-plated-built-in-shock-dampener-stainless-latch-pin","title":"Dexter Hydraulic Drum Brake Actuator, Bolt-On Trailer Coupler, 8000 lb Capacity - K99-Z85-00","description":"\u003cp\u003eThe Dexter K99-Z85-00 is a bolt-on hydraulic drum brake actuator built for boat trailers, rated for an 8000 pound towing capacity. It mounts using standard coupler mounting holes, so it installs in place of a compatible actuator without modifying the trailer tongue. The actuator uses an oversized master cylinder design that generates higher braking pressure for faster, smoother stops when towing at capacity.\u003c\/p\u003e\u003cp\u003eA built-in shock dampener is incorporated directly into the master cylinder, absorbing surge shock and reducing the jolting that can occur during braking or backing up. An easy bleed system is built into the unit to simplify routine hydraulic servicing and air removal after fluid changes. A stainless steel safety latch pin secures the coupler to the hitch ball, and the housing carries a zinc-plated finish for corrosion resistance in the wet, salt-exposed conditions typical of boat trailer use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K99-Z85-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983011087\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.56 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 20 x 5.25 x 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTowing Capacity:\u003c\/strong\u003e 8000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bolt-on, standard coupler mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Latch Pin:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the towing capacity of the Dexter K99-Z85-00 drum brake actuator?\u003c\/strong\u003e The Dexter K99-Z85-00 is rated for an 8000 pound towing capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this actuator mount to my trailer?\u003c\/strong\u003e It is a bolt-on unit that uses standard coupler mounting holes, so K99-Z85-00 installs without modifying the trailer tongue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K99-Z85-00 include a safety latch pin?\u003c\/strong\u003e Yes, a stainless steel safety latch pin is included to secure the coupler to the hitch ball.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this brake actuator?\u003c\/strong\u003e The Dexter K99-Z85-00 measures 20 x 5.25 x 6.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K99-Z85-00 weigh?\u003c\/strong\u003e It weighs 19.56 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material or finish protects this actuator from corrosion?\u003c\/strong\u003e The K99-Z85-00 has a zinc-plated finish, which resists corrosion in wet, salt-exposed boat trailer environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this actuator have a shock dampener?\u003c\/strong\u003e Yes, a shock dampener is built directly into the master cylinder of the K99-Z85-00 to absorb surge shock and reduce jolting during braking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I bleed the hydraulic system on this actuator?\u003c\/strong\u003e The K99-Z85-00 includes an easy bleed system designed into the unit to simplify removing air from the hydraulic line during servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this actuator use an oversized master cylinder?\u003c\/strong\u003e The oversized master cylinder design in the K99-Z85-00 produces higher braking pressure, giving faster and smoother stops when towing at or near the 8000 pound capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K99-Z85-00 a complete drum brake coupler assembly?\u003c\/strong\u003e Yes, it is a complete bolt-on hydraulic drum brake actuator and coupler assembly, part number K99-Z85-00.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265915099,"sku":"DEX-K99-Z85-00","price":474.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-82403_lg__53689.1687188021.500.750.jpg?v=1785189024"},{"product_id":"titan-model-60-coupler-repair-kit-multi-fit-for-surge-brake-actuators-mpn-k74-325-00","title":"Dexter Coupler Repair Kit K74-325-00 for Model 60 Surge Actuator, Multi-Fit","description":"\u003cp\u003eThe Dexter Coupler Repair Kit K74-325-00 is a Multi-Fit coupler repair kit built for the Model 60 surge actuator, giving trailer owners a way to restore worn or damaged coupler components on this actuator without replacing the entire unit. Surge actuators rely on the coupler assembly to transfer the tow vehicle's braking motion into hydraulic pressure at the trailer's brakes, so a worn coupler can lead to sluggish or unreliable brake response. This repair kit is designed to fit the Model 60 surge actuator and is described as Multi-Fit, making it a practical option for servicing this actuator without sourcing a full replacement assembly.\u003c\/p\u003e\u003cp\u003eBecause it is a repair kit rather than a complete actuator, it is intended for owners and technicians performing routine maintenance or restoring an existing Model 60 unit to proper working order. The kit weighs 1.49 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K74-325-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Coupler Repair Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Multi-Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Model 60 Surge Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983016303\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.49 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eModel 60 surge actuator\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K74-325-00 coupler repair kit fit?\u003c\/strong\u003e The K74-325-00 is a Multi-Fit coupler repair kit designed for the Model 60 surge actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full actuator replacement or a repair kit?\u003c\/strong\u003e K74-325-00 is a coupler repair kit for the Model 60 surge actuator, not a complete actuator assembly, so it is used to service and restore the existing unit's coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K74-325-00 coupler repair kit weigh?\u003c\/strong\u003e It weighs 1.49 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this kit?\u003c\/strong\u003e The part number is K74-325-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is this coupler repair kit?\u003c\/strong\u003e This coupler repair kit is made by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Multi-Fit mean it works with more than one actuator setup?\u003c\/strong\u003e Multi-Fit describes the K74-325-00 kit's compatibility with the Model 60 surge actuator's coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K74-325-00 kit?\u003c\/strong\u003e The UPC is 876983016303.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the K74-325-00?\u003c\/strong\u003e The K74-325-00 is listed as a trailer brake actuator component, specifically a coupler repair kit for the Model 60 surge actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a coupler repair kit for my surge actuator?\u003c\/strong\u003e A coupler repair kit like the K74-325-00 lets you restore a worn or damaged coupler on the Model 60 surge actuator so it can properly transfer tow vehicle braking motion into the trailer's hydraulic brake system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K74-325-00 kit specific to the Model 60 surge actuator?\u003c\/strong\u003e Yes, the K74-325-00 coupler repair kit is designed for the Model 60 surge actuator.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991266275547,"sku":"DEX-K74-325-00","price":37.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-4045400_lg__14635.1558114338.500.750.jpg?v=1785189168"},{"product_id":"single-axle-trailer-brake-line-kit-complete-dot-flex-hose-hydraulic-brake-line-assembly-with-t-connectors-and-hardware","title":"Dexter Axle Single Axle Brake Line Kit K71-G02-58, DOT Flex Hose Kit for Boat Trailers","description":"\u003cp\u003eThe Dexter Axle Single Axle Brake Line Kit K71-G02-58 is a complete brake line hardware kit built for single-axle boat trailers running DOT-approved flex hose brake systems. It supplies the flex hose runs, connectors, and mounting hardware needed to plumb a single-axle trailer's hydraulic brake line from the master cylinder or actuator back to the axle brake assembly, making it a practical option for routine brake-line replacement or trailer builds.\u003c\/p\u003e\u003cp\u003eThe kit includes DOT flex hose in three lengths (two 24 inch sections, one 76 inch section, and one 240 inch section) along with union T connectors and T clamps to join and route the lines, cable ties and cable clamps to secure the hose runs along the trailer frame, and self tapping screws for mounting. Construction uses metal fittings finished in black. Because it is sized as a single axle kit, it is intended for trailers with one axle rather than tandem or multi-axle configurations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-58\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Single Axle Brake Line Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.78 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Packs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 x 24 inch DOT flex hose, 1 x 76 inch DOT flex hose, 1 x 240 inch DOT flex hose, 5 cable ties, 2 union T connectors, 2 T clamps, 8 self tapping screws, 4 cable clamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter Axle Single Axle Brake Line Kit K71-G02-58?\u003c\/strong\u003e The kit includes two 24 inch DOT flex hoses, one 76 inch DOT flex hose, one 240 inch DOT flex hose, 5 cable ties, 2 union T connectors, 2 T clamps, 8 self tapping screws, and 4 cable clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K71-G02-58 designed for single or tandem axle trailers?\u003c\/strong\u003e K71-G02-58 is a single axle kit, built to supply the brake line hardware for a trailer with one axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the fittings made from?\u003c\/strong\u003e The fittings in the Dexter Axle Single Axle Brake Line Kit are metal, finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake line kit weigh?\u003c\/strong\u003e The K71-G02-58 kit weighs 2.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the flex hose in this kit?\u003c\/strong\u003e The DOT flex hose included in the Dexter Axle K71-G02-58 kit has an outside diameter of 24 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hose supplied in this kit in total?\u003c\/strong\u003e Combined item length for the hose in this Dexter Axle single axle kit is 20 feet, made up of two 24 inch sections, one 76 inch section, and one 240 inch section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include hardware to mount the hose along the trailer frame?\u003c\/strong\u003e Yes, K71-G02-58 includes 5 cable ties, 4 cable clamps, and 8 self tapping screws for securing the hose runs to the trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connectors are used to join the hose sections?\u003c\/strong\u003e The kit uses 2 union T connectors along with 2 T clamps to join and secure the flex hose sections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the flex hose in this kit DOT approved?\u003c\/strong\u003e Yes, the flex hose supplied in the Dexter Axle K71-G02-58 Single Axle Kit is DOT flex hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number K71-G02-58?\u003c\/strong\u003e K71-G02-58 is manufactured by Dexter Axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991266308315,"sku":"DEX-K71-G02-58","price":124.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-80326_large__99794.1558175676.500.750.jpg?v=1785188783"},{"product_id":"dexter-k71-g02-57-add-on-axle-brake-line-kit-for-tandem-trailer-disc-or-drum-brakes","title":"Dexter Add-On Axle Brake Line Kit K71-G02-57 - Brass Trailer Brake Line Kit","description":"\u003cp\u003eThe Dexter Add-On Axle Brake Line Kit (K71-G02-57) extends a single-axle trailer brake line setup into a tandem-axle configuration. It is designed to be used together with a single axle brake line kit; combining the single axle kit and this add-on kit forms one complete tandem end-unit brake line kit. The kit includes all hardware needed to add disc or drum brakes to a trailer axle, though the actuator and brake assemblies themselves are supplied separately. Lines and fittings are made of brass for corrosion resistance in wet, marine-trailer environments. This kit is intended for installers and trailer owners upgrading a single-axle brake line system to tandem-axle coverage without replacing the entire brake line assembly. Because it is an add-on component rather than a standalone kit, it should not be installed by itself - it is only a complete solution when paired with the corresponding single axle brake line kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-57\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Add-On Axle Brake Line Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.79 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended Use:\u003c\/strong\u003e Combines with a single axle brake line kit to form a tandem axle brake line kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type Supported:\u003c\/strong\u003e Disc or drum brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Brake line hardware (actuator and brakes not included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-G02-57 Add-On Axle Brake Line Kit used for?\u003c\/strong\u003e It extends a trailer's single-axle brake line setup to cover a second axle, letting you convert a single axle brake line kit into a tandem axle configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K71-G02-57 add-on kit be installed by itself?\u003c\/strong\u003e No. The K71-G02-57 add-on kit must be used together with a single axle brake line kit - on its own it does not form a complete brake line system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work with both disc and drum brakes?\u003c\/strong\u003e Yes, the K71-G02-57 brake line kit can be used to add either disc or drum brakes to a trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the brake lines made of?\u003c\/strong\u003e The Dexter K71-G02-57 kit is made of brass, chosen for its corrosion resistance in wet trailer and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-57 brake line kit weigh?\u003c\/strong\u003e The kit weighs 1.79 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the actuator and brakes included in this kit?\u003c\/strong\u003e No. The K71-G02-57 kit includes the brake line hardware only; you supply the actuator and the brake assemblies separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the single axle kit and this add-on kit?\u003c\/strong\u003e The single axle kit is a complete brake line kit for one axle on its own, while the K71-G02-57 add-on kit is designed to pair with that single axle kit to add a second axle, together forming a tandem end-unit brake line kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-G02-57 kit the same as a tandem axle brake line kit?\u003c\/strong\u003e Not by itself. The tandem configuration is achieved by combining the single axle kit with this K71-G02-57 add-on kit into one end unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the K71-G02-57 kit have?\u003c\/strong\u003e It has a brass finish, consistent with its brass construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho would need the K71-G02-57 Add-On Axle Brake Line Kit?\u003c\/strong\u003e Trailer owners or installers who already have a single axle brake line kit and want to extend brake lines to a second axle need the K71-G02-57 add-on kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991266472155,"sku":"DEX-K71-G02-57","price":89.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-80326_large_1__96124.1558175718.500.750.jpg?v=1785188329"},{"product_id":"a-60-actuator-inner-member-only-single-axle-drum-brake-trailer-coupler-replacement-14-5-dexter-099-060-00","title":"Dexter A-60 Actuator 099-060-00 Single Axle Drum Brake Inner Member Only","description":"\u003cp\u003eThe Dexter A-60 Actuator, part number 099-060-00, is a single axle drum brake actuator supplied as the inner member only. It measures 14.5 inches long with mounting holes positioned 1 inch down, and is designed to pair with a separately ordered outer member housing (such as an L, XL, SXL, or S style weld-on or bolt-on housing) to complete the actuator assembly. Dexter identifies this component within its actuator part numbering system, where the digits following the 099-060 prefix designate the specific outer member pairing, letting trailer owners and repair shops match the correct housing to this inner member for their application. Because it ships as the inner member only, this part is intended for owners replacing a worn or damaged actuator core while reusing or separately sourcing a compatible outer housing, or for those assembling a complete actuator from individually selected Dexter components. The unit weighs 16.28 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-060-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e A-60 Actuator Single Axle Drum Inner Member Only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Included:\u003c\/strong\u003e Inner member only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Position:\u003c\/strong\u003e 1 inch down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.28 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is the inner member component of the Dexter A-60 actuator series for single axle drum brake trailers; it requires a compatible Dexter outer member housing to form a complete actuator assembly.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter 099-060-00 actuator include?\u003c\/strong\u003e Part number 099-060-00 is the A-60 actuator inner member only; it does not include an outer member housing, which is ordered separately to complete the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Dexter A-60 inner member?\u003c\/strong\u003e The 099-060-00 inner member measures 14.5 inches long, with mounting holes positioned 1 inch down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this for a single axle or tandem axle trailer?\u003c\/strong\u003e The Dexter A-60 actuator, part 099-060-00, is configured for single axle trailer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter A-60 actuator weigh?\u003c\/strong\u003e 16.28 pounds is the shipping weight of the Dexter A-60 actuator, part number 099-060-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy an outer member housing separately?\u003c\/strong\u003e Yes, because 099-060-00 is the inner member only, a compatible Dexter outer member housing (such as an L, XL, SXL, or S style unit) must be selected separately to complete the actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the inner member and outer member of this actuator?\u003c\/strong\u003e The inner member, part 099-060-00, is the core component of the A-60 actuator, while the outer member is the weld-on or bolt-on housing that mounts it to the trailer tongue; Dexter sells them as separate parts that are paired together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part number 099-060-00 come as a boxed kit?\u003c\/strong\u003e A boxed kit version of this actuator is identified with a K-prefixed number (K99-060-00); part 099-060-00 itself refers to the inner member component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this actuator?\u003c\/strong\u003e This actuator is manufactured by Dexter under part number 099-060-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is 099-060-00?\u003c\/strong\u003e 099-060-00 is classified as a trailer brake actuator, specifically the A-60 single axle drum brake inner member.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre OEM cross-reference numbers available for this actuator?\u003c\/strong\u003e No OEM cross-reference or replacement numbers are specified for Dexter part 099-060-00.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991342690523,"sku":"DEX-099-060-00","price":291.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-099-060-00__71685.1780061499.500.750.jpg?v=1785329081"},{"product_id":"dexter-dx7-5-surge-brake-actuator-7-500-lb-bolt-on-disc-zinc-plated-14-5-top-mount-mpn-099-075-10","title":"Dexter 099-075-10 Surge Actuator, Bolt-On Disc Brake, Zinc Plated, 14.5 Inch","description":"\u003cp\u003eThe Dexter 099-075-10 is a bolt-on surge actuator built for disc brake trailer systems. As the surge actuator, it is the component that converts the tow vehicle's braking momentum into hydraulic pressure, activating the trailer's disc brakes as the trailer pushes forward against the coupler during deceleration. This unit is finished in zinc plating for corrosion resistance in the wet, road-salt, and marine-adjacent environments trailers are routinely exposed to.\u003c\/p\u003e\u003cp\u003eThe actuator measures 14.5 inches long with mounting holes set 1 inch down, and it is designed as a bolt-on housing, meaning it mounts directly to the trailer tongue without welding. It is intended for disc brake trailer setups and is sold as the actuator assembly itself.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-075-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Surge Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Disc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing:\u003c\/strong\u003e 1 inch down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 099-075-10?\u003c\/strong\u003e It is a bolt-on surge actuator, part number 099-075-10, designed for trailer disc brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a surge actuator work?\u003c\/strong\u003e A surge actuator, such as the Dexter 099-075-10, converts the forward push of the trailer against the coupler during tow-vehicle braking into hydraulic pressure that applies the trailer's disc brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 099-075-10 actuator?\u003c\/strong\u003e The Dexter 099-075-10 measures 14.5 inches long, with mounting holes spaced 1 inch down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 099-075-10 weigh?\u003c\/strong\u003e The Dexter 099-075-10 surge actuator weighs 14.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 099-075-10 bolt-on or weld-on?\u003c\/strong\u003e Bolt-on. The Dexter 099-075-10 mounts to the trailer tongue with bolts rather than requiring welding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake type is the 099-075-10 designed for?\u003c\/strong\u003e The Dexter 099-075-10 is designed for disc brake trailer systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 099-075-10 actuator have?\u003c\/strong\u003e Zinc plated. The Dexter 099-075-10 has a zinc-plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 099-075-10 the full actuator assembly?\u003c\/strong\u003e Yes, the Dexter 099-075-10 is sold as the surge actuator assembly itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures part 099-075-10?\u003c\/strong\u003e Dexter manufactures the 099-075-10 surge actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is 099-075-10?\u003c\/strong\u003e The 099-075-10 is listed as a trailer brake actuator, the component that triggers braking through coupler surge.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991342723291,"sku":"DEX-099-075-10","price":304.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFP-DX7.5L-A75-Drop-N-Go-Surge-Actuator__64059.1722497391.500.750.jpg?v=1785188309"},{"product_id":"a-60-inner-slide-member-for-hydraulic-surge-disc-brake-actuator-with-lock-out-solenoid-7-500-lb-replaces-34044-fits-2-ball-tandem-axle-trailers","title":"UFP by Dexter A-60 Hydraulic Disc Brake Actuator Inner Slide Member 099-060-20, 7,500 lb Tandem Axle, 2 Inch Ball","description":"\u003cp\u003eThis is the UFP by Dexter A-60 inner slide member, the moving component of a hydraulic surge disc brake actuator on tandem axle trailers. It pairs with the A-60 outer member to form the complete actuator assembly, transferring towing deceleration force into hydraulic pressure that applies the trailer's disc brakes. This inner slide is built for disc brake systems and comes with the lock-out solenoid already installed, which is required for disc brake actuator operation so the brakes do not drag in reverse.\u003c\/p\u003e\u003cp\u003eThe unit is sized for a 2 inch ball coupler and is rated for tandem axle trailers up to 7,500 lb. It measures 14.5 inches long, with mounting holes spaced 1 inch down. Part number 099-060-20 replaces the earlier numbering used for this same UFP by Dexter A-60 inner slide member, so it installs as a direct match into existing A-60 surge actuator housings without modification.\u003c\/p\u003e\u003cp\u003eUse this part when rebuilding or servicing an A-60 surge brake actuator on a boat trailer, utility trailer, or other tandem axle trailer equipped with hydraulic disc brakes, or when the solenoid or inner slide assembly has worn out and needs replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e UFP by Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-060-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Inner slide member (disc brake actuator)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outer Member:\u003c\/strong\u003e A-60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Disc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Lock-out solenoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Rating:\u003c\/strong\u003e 7,500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Configuration:\u003c\/strong\u003e Tandem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Location:\u003c\/strong\u003e 1 inch down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 34044\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits UFP Model A-60 surge brake actuator assemblies. Designed for hydraulic disc brakes on tandem axle trailers rated to 7,500 lb, with a 2 inch ball coupler.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e34044\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 099-060-20 inner slide member fit?\u003c\/strong\u003e Part number 099-060-20 is the inner slide member for a UFP by Dexter A-60 hydraulic surge brake actuator, used on tandem axle trailers with disc brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this part include the lock-out solenoid?\u003c\/strong\u003e Yes, the 099-060-20 inner slide member ships with the lock-out solenoid already installed, which disc brake actuators require to prevent brake drag in reverse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ball size is this actuator inner slide designed for?\u003c\/strong\u003e This A-60 inner slide member, 099-060-20, is sized for a 2 inch ball coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight rating of the 099-060-20 inner slide member?\u003c\/strong\u003e It is rated for tandem axle trailers up to 7,500 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 099-060-20 inner slide member?\u003c\/strong\u003e The inner slide measures 14.5 inches long, with mounting holes spaced 1 inch down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 099-060-20 part weigh?\u003c\/strong\u003e The UFP by Dexter A-60 inner slide member weighs 14.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 099-060-20 the same part as OEM number 34044?\u003c\/strong\u003e Yes, 099-060-20 corresponds to the earlier OEM part number 34044 for the same UFP by Dexter A-60 inner slide member.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this inner slide member made for disc or drum brakes?\u003c\/strong\u003e It is built specifically for disc brake actuator applications, not drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this part work with single axle trailers?\u003c\/strong\u003e The 099-060-20 inner slide member is specified for tandem axle trailers rated to 7,500 pounds; single axle fitment is not stated in its specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer member does this inner slide pair with?\u003c\/strong\u003e This inner slide member is designed to work with the A-60 outer member of the surge brake actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this part be used to rebuild an existing A-60 actuator?\u003c\/strong\u003e Yes, the 099-060-20 inner slide member with lock-out solenoid is intended for servicing or rebuilding an A-60 surge brake actuator.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991342756059,"sku":"DEX-099-060-20","price":344.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-99-060-20-DX-7.5L-A60-Inner-Member-Actuator-with-Solenoid__77518.1739477124.500.750.jpg?v=1785188129"},{"product_id":"a-60-single-disc-hydraulic-brake-actuator-inner-slide-member-7-500-lb-single-axle-trailer","title":"Dexter A-60 Hydraulic Disc Brake Actuator Inner Member, 7,500 lb, Part 099-060-10","description":"\u003cp\u003eThe Dexter 099-060-10 is the inner member (slide) component of the A-60 hydraulic disc brake actuator, rated for 7,500 lb and built for 1-axle trailer applications. This is the inner sliding assembly only; it does not include the outer member housing, which is offered as a separate component in Dexter's actuator lineup. The inner member is the working core of the actuator, the part that translates tow vehicle braking force into hydraulic pressure at the trailer's disc brakes, and is used when replacing a worn or damaged actuator core without replacing the entire outer housing assembly.\u003c\/p\u003e\u003cp\u003eThis part is sold under Dexter's actuator model designation A-60, which is part of a family of actuator models (alongside A-75, A-84, and XR-84) that share compatible outer member housing options. Ordering the correct inner member for your actuator model ensures proper fit and function within the hydraulic brake system. The component weighs 16.28 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-060-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Inner Member (Slide) Only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e A-60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,500 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Configuration:\u003c\/strong\u003e 1-Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 099-060-10\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 099-060-10?\u003c\/strong\u003e It is the inner member, or inner slide, of the Dexter A-60 hydraulic disc brake actuator, sold as a standalone replacement component rather than a complete actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity is this actuator inner member rated for?\u003c\/strong\u003e The A-60 actuator that uses part 099-060-10 is rated for 7,500 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 099-060-10 include the outer member or housing?\u003c\/strong\u003e No. Part 099-060-10 is the inner member only; the outer member housing is a separate component in Dexter's actuator lineup and is not included with this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich actuator model is part 099-060-10 designed for?\u003c\/strong\u003e This inner member is designed for Dexter's A-60 hydraulic disc brake actuator, one of a family of actuator models that also includes the A-75, A-84, and XR-84.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator inner member for single-axle or tandem-axle trailers?\u003c\/strong\u003e Part 099-060-10 is configured for 1-axle trailer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 099-060-10 inner member weigh?\u003c\/strong\u003e It weighs 16.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 099-060-10 a genuine Dexter part number?\u003c\/strong\u003e Yes, 099-060-10 is Dexter's own manufacturer part number for this A-60 actuator inner member.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is this?\u003c\/strong\u003e Part 099-060-10 falls under trailer brake actuators, specifically as the inner sliding member of a hydraulic disc brake actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UPC the same as the part number for 099-060-10?\u003c\/strong\u003e Yes, the UPC listed for this component is 099-060-10, matching the Dexter manufacturer part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991342821595,"sku":"DEX-099-060-10","price":355.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-99-060-10-DX-7.5L-A60-Inner-Member-Actuator-with-Solenoid__16970.1739477124.500.750.jpg?v=1785189214"},{"product_id":"dexter-dx7-5-bolt-on-surge-brake-actuator-for-drum-brakes-zinc-plated-7-500-lb-mpn-099-075-00","title":"Dexter 099-075-00 Trailer Surge Brake Actuator, Bolt-On Drum Mount, Zinc Plated, 14.5 Inch","description":"\u003cp\u003eThe Dexter 099-075-00 is a bolt-on surge brake actuator built for drum brake trailer systems. It mounts on top of the trailer tongue and uses the trailer's forward momentum during braking to apply hydraulic pressure to the drum brakes, giving the trailer its own stopping power that works in sync with the tow vehicle. The housing is zinc plated for corrosion resistance in the wet, road-spray environment trailer tongues are exposed to.\u003c\/p\u003e\u003cp\u003eThis actuator measures 14.5 inches long, with its mounting holes positioned 1 inch down from the top of the housing, matching the standard bolt-on coupler footprint used across Dexter's DX line of surge actuators. Per Dexter's part numbering system, the 099-075-00 is built with no outer member installed, so it ships as the actuator body itself rather than as an assembly that includes a weld-on or bolt-on coupler housing extension.\u003c\/p\u003e\u003cp\u003eUse this actuator when replacing a worn or leaking surge brake unit on a drum-brake trailer, or when building out a trailer braking system that calls for a bolt-on, top-mount surge actuator of this length and hole spacing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-075-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Drum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Position:\u003c\/strong\u003e 1 inch down from the top of the housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Member:\u003c\/strong\u003e None (no outer member installed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 099-075-00 used for?\u003c\/strong\u003e It is a bolt-on surge brake actuator that mounts on a trailer tongue and applies hydraulic pressure to drum brakes when the trailer pushes forward against the tow vehicle during braking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 099-075-00 actuator?\u003c\/strong\u003e The housing measures 14.5 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the mounting holes located on this actuator?\u003c\/strong\u003e The mounting holes sit 1 inch down from the top of the 099-075-00 housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 099-075-00 come with a coupler housing extension?\u003c\/strong\u003e No. Per Dexter's part numbering, the 099-075-00 is built with no outer member, meaning it ships as the actuator body only, without a weld-on or bolt-on coupler housing extension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator for drum brakes or disc brakes?\u003c\/strong\u003e The Dexter 099-075-00 is a drum brake surge actuator, not a disc brake unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 099-075-00 mount to the trailer tongue?\u003c\/strong\u003e It is a bolt-on style actuator, meaning it attaches with bolts through the housing rather than being welded to the tongue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Dexter 099-075-00 have?\u003c\/strong\u003e The housing is zinc plated for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 099-075-00 weigh?\u003c\/strong\u003e It weighs 14.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 099-075-00 work with a straight or A-frame tongue?\u003c\/strong\u003e As a bolt-on, top-mount surge actuator, the 099-075-00 is designed to install on top of a trailer tongue; consult your coupler and tongue dimensions to confirm the bolt pattern and hole spacing match this 14.5 inch, 1-inch-down housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 099-075-00 be paired with a separate coupler housing?\u003c\/strong\u003e Since this part has no outer member installed, it is intended to be used as the base actuator, with the outer coupler housing sourced or matched separately if your trailer setup requires one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the Dexter 099-075-00?\u003c\/strong\u003e It is classified as a trailer brake actuator, specifically a surge-type actuator for drum brake trailers.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991342854363,"sku":"DEX-099-075-00","price":242.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/099-075-00__36211.1763741660.500.750.jpg?v=1785329079"},{"product_id":"dexter-dx7-5-a-75-surge-brake-actuator-zinc-bolt-on-disc-coupler-for-tandem-axle-trailers-099-075-20","title":"Dexter 099-075-20 Dx7.5 Surge Actuator, Bolt-On Disc Brake, Zinc Plated","description":"\u003cp\u003eThe Dexter 099-075-20 is a bolt-on surge actuator built for disc brake trailer axles. As the surge actuator, it is the component that converts the towing coupler's braking force into hydraulic pressure sent to the trailer's disc brake calipers, allowing the trailer to brake in proportion to the tow vehicle's deceleration. This unit uses a bolt-on mounting style rather than a weld-on housing, which allows it to be installed onto an existing coupler or tongue assembly without welding. The housing has a zinc-plated finish, which provides corrosion resistance for the actuator body in the wet, salt-exposed conditions typical of trailer towing and marine\/boat trailer use.\u003c\/p\u003e\u003cp\u003eThe actuator measures 14.5 inches long, with mounting holes positioned 1 inch down from the top edge, allowing for direct alignment on compatible coupler or tongue hardware using this hole spacing. It is identified by Dexter part number 099-075-20 and is intended for disc brake surge systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-075-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Surge (hydraulic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Bolt On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type Compatibility:\u003c\/strong\u003e Disc Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Offset:\u003c\/strong\u003e 1 inch down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 099-075-20 surge actuator for?\u003c\/strong\u003e It is a surge actuator that converts the coupler's braking force into hydraulic pressure for a trailer's disc brakes, and it is designed for bolt-on mounting rather than welding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 099-075-20 a bolt-on or weld-on actuator?\u003c\/strong\u003e The Dexter 099-075-20 is a bolt-on unit, so it mounts to existing coupler or tongue hardware without welding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake type does the Dexter 099-075-20 work with?\u003c\/strong\u003e This actuator is built for disc brake systems on trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 099-075-20 actuator have?\u003c\/strong\u003e It has a zinc-plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Dexter 099-075-20 actuator?\u003c\/strong\u003e It measures 14.5 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the mounting holes on the 099-075-20 located?\u003c\/strong\u003e The mounting holes are positioned 1 inch down from the top edge of the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 099-075-20 surge actuator weigh?\u003c\/strong\u003e It weighs 14.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 099-075-20 a genuine Dexter part?\u003c\/strong\u003e Yes, 099-075-20 is a Dexter manufacturer part number for this surge actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 099-075-20 use a hydraulic or electric braking system?\u003c\/strong\u003e It is a hydraulic surge actuator, not an electric brake actuator.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991342985435,"sku":"DEX-099-075-20","price":295.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFP-DX7.5L-A75-Drop-N-Go-Surge-Actuator__29846.1722490667.500.750.jpg?v=1785188207"},{"product_id":"lucas-oil-dot-3-synthetic-brake-fluid-12-oz-bottle","title":"Lucas Oil DOT 3 Synthetic Brake Fluid, 12 oz Bottle","description":"\u003cp\u003eLucas Oil DOT 3 Synthetic Brake Fluid is a synthetic formula blended with polyethylene glycol and additional additives to meet DOT 3 industry standards for hydraulic brake and clutch systems. It carries a minimum dry boiling point of 401 degrees F, giving it the thermal margin needed to resist vapor lock and maintain firm, consistent pedal feel under repeated braking or towing conditions. The formula is engineered to protect the internal components of a hydraulic system rather than just fill it: it helps prevent rust and corrosion on metal brake system parts, provides excellent lubricity to keep moving components such as caliper pistons and master cylinder seals operating smoothly, and is compatible with the rubber components used throughout most brake and clutch systems, helping prevent seals from hardening or softening over time.\u003c\/p\u003e\u003cp\u003eThis DOT 3 synthetic brake fluid is packaged in a 12 ounce bottle, sized for routine brake fluid top-offs, fluid flushes, and clutch hydraulic system service. It is suited for use wherever a DOT 3 rated synthetic brake fluid is specified for brake or clutch hydraulic systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lucas Oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LUCA10825\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e DOT 3 Synthetic Brake Fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 12 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Dry Boiling Point:\u003c\/strong\u003e 401 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Compatibility:\u003c\/strong\u003e Compatible with rubber components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 049807108250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat DOT rating is Lucas Oil brake fluid LUCA10825?\u003c\/strong\u003e Lucas Oil DOT 3 Synthetic Brake Fluid (LUCA10825) is rated DOT 3, meeting industry standard requirements for hydraulic brake and clutch fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum boiling point of this brake fluid?\u003c\/strong\u003e It has a minimum dry boiling point of 401 degrees F, which helps resist vapor lock during heavy or repeated braking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake fluid synthetic?\u003c\/strong\u003e Yes, Lucas Oil DOT 3 Brake Fluid is a synthetic formula made with a blend of polyethylene glycol and other additives to meet DOT 3 industry standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fluid be used in clutch hydraulic systems as well as brakes?\u003c\/strong\u003e Yes, this DOT 3 synthetic fluid is formulated for use in both brake and clutch hydraulic systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this brake fluid damage rubber seals or hoses?\u003c\/strong\u003e No, Lucas Oil DOT 3 Brake Fluid is compatible with rubber components and helps prevent seals from hardening or softening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake fluid help prevent corrosion in the brake system?\u003c\/strong\u003e Yes, it helps protect against rust and corrosion inside brake and clutch hydraulic systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid comes in one bottle?\u003c\/strong\u003e Lucas Oil DOT 3 Synthetic Brake Fluid (LUCA10825) is packaged in a 12 ounce bottle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake fluid provide lubrication for moving parts?\u003c\/strong\u003e Yes, it provides excellent lubricity to help components such as caliper pistons and master cylinder seals move smoothly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Lucas Oil DOT 3 Brake Fluid, 12 oz?\u003c\/strong\u003e The UPC for this 12 oz bottle of Lucas Oil DOT 3 Synthetic Brake Fluid (LUCA10825) is 049807108250.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a bottle of this brake fluid weigh?\u003c\/strong\u003e A 12 oz bottle of Lucas Oil DOT 3 Synthetic Brake Fluid weighs 0.9 pounds.\u003c\/p\u003e","brand":"Lucas Oil","offers":[{"title":"Default Title","offer_id":49028225827035,"sku":"LUC-10825","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LUC-10825__81629.1747363848.500.750.jpg?v=1785165076"},{"product_id":"c-t-johnson-surge-brake-lock-rc4-2-1-2-inch-coupler-opening","title":"C.T.Johnson Surge Brake Lock RC4, 2-1\/2 Inch Coupler Opening","description":"\u003cp\u003eThe C.T.Johnson RC4 Surge Brake Lock is a coupler lock designed for trailer couplers with a 2-1\/2 inch opening span. It secures the surge brake coupler mechanism to deter unauthorized towing and theft while the trailer is parked or in storage. The lock features a machined exterior construction and is manufactured in the United States. Each unit ships as a single-piece lock with a package quantity of one.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e C.T.Johnson\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RC4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailer Brake Lock \/ Auto Accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Opening Span:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8 x 5 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size coupler does the C.T.Johnson RC4 fit?\u003c\/strong\u003e The RC4 is built for a 2-1\/2 inch coupler opening span, so measure the coupler opening before ordering to confirm this size matches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RC4 a genuine C.T.Johnson part or an aftermarket copy?\u003c\/strong\u003e RC4 is the genuine C.T.Johnson manufacturer part number for this surge brake lock, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the RC4 brake lock weigh?\u003c\/strong\u003e This lock weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the RC4 lock?\u003c\/strong\u003e The RC4 measures 8 x 5 x 2 inches as a packaged unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the RC4 lock made of?\u003c\/strong\u003e The C.T.Johnson RC4 has a machined exterior construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the RC4 lock manufactured?\u003c\/strong\u003e The RC4 Surge Brake Lock is made in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many locks come in one package?\u003c\/strong\u003e Each package contains one C.T.Johnson RC4 surge brake lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a surge brake lock used for?\u003c\/strong\u003e A surge brake lock like the RC4 fits over the trailer coupler to prevent the surge brake actuator from being operated, deterring theft of the trailer while it is unattended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the RC4 fit a coupler with a different opening size?\u003c\/strong\u003e No, the RC4 is sized specifically for a 2-1\/2 inch coupler opening span and will not properly secure couplers of a different opening size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RC4 lock still in production?\u003c\/strong\u003e Yes, the C.T.Johnson RC4 is not discontinued and remains an active manufacturer part number.\u003c\/p\u003e","brand":"CT Johnson","offers":[{"title":"Default Title","offer_id":49031071236315,"sku":"CTJ-RC4","price":14.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71_CgOP60qL.jpg?v=1785207995"},{"product_id":"deadbolt-surge-brake-coupler-lock-rc5-1-4-inch-diameter-3-3-8-inch-span","title":"DeadBolt Surge Brake Coupler Lock RC5, 1\/4 Inch Diameter, 3-3\/8 Inch Span","description":"\u003cp\u003eThe DeadBolt RC5 is a gear-type deadbolt lock designed to secure a trailer's hydraulic surge brake actuator, preventing the coupler from being disconnected or the trailer from being towed away without authorization. Constructed of fine machined steel for durability, the lock body offers high salt resistance to withstand marine and coastal towing environments where trailers are frequently exposed to saltwater and humidity. The locking pin and interior pin receiver are made of stainless steel, adding corrosion resistance at the points of contact that see the most wear. The RC5 uses a key lock mechanism with a gear-type locking action, and it is sized for a 1\/4 inch diameter pin with a 3-3\/8 inch span, matching common surge brake actuator coupler dimensions. It ships as a single unit and is intended specifically for securing trailer brake actuators rather than general hitch or coupler locking. The finish is polished, and the lock is available with gold or silver coloring on the housing. At 1.2 pounds, it is compact enough to store in a tow vehicle or trailer tongue box while still providing a solid mechanical deterrent against tampering or theft.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e DeadBolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e RC5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Locks and Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Type:\u003c\/strong\u003e Key Lock (gear type)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Securing trailer brake actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpan:\u003c\/strong\u003e 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Anti-Corrosion, High Salt Resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gold, Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2 x 6.95 x 1.95 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the DeadBolt RC5 lock used for?\u003c\/strong\u003e The DeadBolt RC5 is used to secure a trailer's hydraulic surge brake actuator, preventing the coupler from being released or the trailer from being towed away without the key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size pin and span does the RC5 lock fit?\u003c\/strong\u003e The RC5 is sized for a 1\/4 inch diameter pin with a 3-3\/8 inch span, matching common surge brake actuator coupler dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the DeadBolt RC5 made from?\u003c\/strong\u003e It is made of fine machined steel with a stainless steel locking pin and interior pin receiver for added corrosion resistance at the wear points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RC5 lock resistant to salt water or corrosion?\u003c\/strong\u003e Yes, the DeadBolt RC5 has a high salt resistance rating along with an anti-corrosion feature, making it suitable for use in marine and coastal towing environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the DeadBolt RC5 lock mechanism work?\u003c\/strong\u003e It is a gear-type deadbolt lock operated with a key, engaging a locking pin into the actuator to block movement of the coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish and color options does the RC5 come in?\u003c\/strong\u003e The DeadBolt RC5 has a polished finish and is available with gold or silver coloring on the lock housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the DeadBolt RC5 weigh?\u003c\/strong\u003e The RC5 weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the package?\u003c\/strong\u003e The DeadBolt RC5 ships as a single unit, one lock per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the RC5 lock?\u003c\/strong\u003e The DeadBolt RC5 measures 2 x 6.95 x 1.95 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the RC5 be used on hitch locks other than brake actuators?\u003c\/strong\u003e The RC5 is designed and recommended specifically for securing trailer brake actuators, not general hitch or coupler applications.\u003c\/p\u003e","brand":"CT Johnson","offers":[{"title":"Default Title","offer_id":49031071301851,"sku":"CTJ-RC5","price":15.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/417YYQiCDFL.jpg?v=1785207996"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/LUC-10825__81629.1747363848.500.750_b293d44c-55ef-4ff0-840a-2e707850dfb1.jpg?v=1785356968","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trailering-trailer-brakes-brake-actuators-master-cylinders.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}