{"title":"Disc Brake Assemblies \u0026 Parts","description":null,"products":[{"product_id":"dexter-a-84-inner-member-disc-brake-with-solenoid-mpn-099-384-20","title":"Dexter A-84 Inner Member, Disc, w\/ Solenoid - Part 099-384-20","description":"\u003cp\u003eThe Dexter A-84 Inner Member is a disc brake component built with an integrated solenoid, identified by part number 099-384-20. It is manufactured by Dexter, a recognized supplier of trailer axle and brake hardware, and is sold as a standalone replacement component for disc brake assemblies that use this inner member and solenoid configuration. The solenoid integration allows this inner member to work as part of an electric-over-hydraulic or similar actuated disc brake system, where the inner member functions as a core structural and operating element within the caliper\/actuator assembly. At 16.6 pounds, this is a substantial, solid metal component consistent with a load-bearing brake part rather than a lightweight accessory. Because it is sold under the Dexter brand and identified by the manufacturer part number 099-384-20, buyers replacing a worn or failed inner member on compatible Dexter disc brake actuators can order this part directly using that number to ensure they receive the correct genuine component.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 099-384-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e A-84 Inner Member, Disc, w\/ Solenoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter A-84 Inner Member?\u003c\/strong\u003e It is a disc brake inner member component with an integrated solenoid, sold by Dexter under part number 099-384-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the A-84 inner member include a solenoid?\u003c\/strong\u003e Yes, part number 099-384-20 is the Inner Member, Disc, w\/ Solenoid configuration, meaning the solenoid is built into this component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 099-384-20 inner member weigh?\u003c\/strong\u003e This inner member weighs 16.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the A-84 inner member a genuine Dexter part?\u003c\/strong\u003e Yes, part 099-384-20 is manufactured and sold under the Dexter brand as a genuine component, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I reference when ordering this inner member?\u003c\/strong\u003e Reference Dexter part number 099-384-20, which is the manufacturer part number for the A-84 Inner Member, Disc, w\/ Solenoid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this inner member sold as a standalone component?\u003c\/strong\u003e Yes, the Dexter A-84 Inner Member, Disc, w\/ Solenoid (099-384-20) is sold as an individual replacement component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake system uses this inner member?\u003c\/strong\u003e This is a disc brake inner member, part of a disc brake actuator assembly that incorporates a solenoid, identified by Dexter part number 099-384-20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the solenoid on the A-84 inner member replaceable separately?\u003c\/strong\u003e Part number 099-384-20 is supplied as the inner member with the solenoid already integrated into the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the product name Dexter uses for part 099-384-20?\u003c\/strong\u003e Dexter designates this component as the A-84 Inner Member, Disc, w\/ Solenoid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the A-84 inner member a heavy-duty component?\u003c\/strong\u003e At 16.6 pounds, the Dexter 099-384-20 inner member is a substantial, solid brake component consistent with load-bearing disc brake hardware.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258935515,"sku":"DEX-099-384-20","price":453.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-8-4k-2-5-16-disc-brake-actuator-inner-member-099-384-20__70370.1747363839.500.750.jpg?v=1785329081"},{"product_id":"dexter-k71-077-05-disc-brake-kit-3-750-lb-zinc-hub-rotor-with-zinc-caliper-complete-wheel-end-kit","title":"Dexter Disc Brake Kit K71-077-05, 3,750 lb Zinc Hub\/Rotor with Zinc Caliper, Complete Wheel End Kit","description":"\u003cp\u003eThe Dexter K71-077-05 is a complete disc brake wheel end kit rated for 3,750 lb capacity, built for trailer axles that require a fully assembled brake corner ready for installation. The kit pairs a zinc-finished hub and rotor with a zinc-finished caliper, giving the assembly a corrosion-resistant surface coating on its major components. Because it is sold as a complete wheel end kit, it is intended to supply the hub, rotor, and caliper together as a matched assembly rather than requiring separate sourcing of these parts. This makes the K71-077-05 suited to trailer owners replacing a worn or damaged brake corner who want the hub, rotor, and caliper to be from a single kit rather than mixed sources. The kit carries the Dexter name, a manufacturer widely used in trailer axle and brake components, and is identified by the part number K71-077-05. At 28.5 pounds, the kit reflects the weight of a fully assembled hub, rotor, and caliper unit rather than an individual component.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-077-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Disc Brake Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3,750 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Complete Wheel End Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub\/Rotor Finish:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper Finish:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983006687\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K71-077-05 disc brake kit?\u003c\/strong\u003e The Dexter K71-077-05 is a complete wheel end kit that includes a zinc-finished hub and rotor along with a zinc-finished caliper, supplied together as one matched assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is the K71-077-05 disc brake kit rated for?\u003c\/strong\u003e This Dexter disc brake kit is rated for 3,750 lb capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish do the hub and rotor have on this kit?\u003c\/strong\u003e The hub and rotor in the Dexter K71-077-05 kit have a zinc finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the caliper on the K71-077-05 kit zinc-finished as well?\u003c\/strong\u003e Yes, the caliper included in the Dexter K71-077-05 kit is zinc-finished, matching the hub and rotor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-077-05 disc brake kit weigh?\u003c\/strong\u003e The complete kit weighs 28.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy the hub, rotor, and caliper separately?\u003c\/strong\u003e No, the K71-077-05 is sold as a complete wheel end kit, so the hub, rotor, and caliper are included together as one assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this brake kit?\u003c\/strong\u003e The part number is K71-077-05, made by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, the K71-077-05 disc brake kit is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does zinc plating on the hub, rotor, and caliper do?\u003c\/strong\u003e Zinc plating provides a corrosion-resistant surface coating on the hub, rotor, and caliper of the K71-077-05 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-077-05 disc brake kit?\u003c\/strong\u003e The UPC for this Dexter disc brake kit is 876983006687.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262933211,"sku":"DEX-K71-077-05","price":323.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K71-077-05-Disc-Brake-Kit__93200.1739477124.500.750.jpg?v=1785329083"},{"product_id":"dexter-k71-078-05-complete-disc-brake-kit-3-750-lb-zinc-hub-rotor-with-aluminum-caliper","title":"Dexter Disc Brake Kit K71-078-05, 3,750 lb Zinc Hub\/Rotor with Aluminum Caliper, Complete Trailer Wheel End Kit","description":"\u003cp\u003eThe Dexter K71-078-05 is a complete trailer wheel end disc brake kit rated for 3,750 lb capacity, built to give trailer owners a single, ready-to-install assembly rather than a collection of separate parts. The kit centers on a zinc-plated hub and rotor combination, paired with an aluminum caliper. Zinc plating on the hub and rotor is applied to help resist corrosion, which matters on trailer running gear that is regularly exposed to road spray, launch ramps, and standing water. The aluminum caliper reduces unsprung weight at the wheel end compared to a cast-iron equivalent, while still housing the components needed to clamp the rotor during braking.\u003c\/p\u003e\u003cp\u003eBecause this is sold as a complete wheel end kit, it is intended to give installers the hub, rotor, and caliper together as one part number, simplifying ordering and reducing the risk of mismatched components. This kit falls within Dexter's Trailer Disc Brakes lineup and is suited to trailer axle applications rated at or compatible with a 3,750 lb capacity per wheel end.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-078-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Disc Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3,750 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub\/Rotor Finish:\u003c\/strong\u003e Zinc-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Complete wheel end kit (hub, rotor, and caliper)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983006694\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K71-078-05 kit?\u003c\/strong\u003e The K71-078-05 is a complete trailer wheel end kit that includes the zinc-plated hub, zinc-plated rotor, and aluminum caliper as a single assembly, rather than requiring these parts to be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity is this disc brake kit rated for?\u003c\/strong\u003e This kit is rated for 3,750 lb capacity, making it suited to trailer axles built around that weight rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the caliper on this kit made of aluminum or cast iron?\u003c\/strong\u003e The caliper included in the Dexter K71-078-05 kit is aluminum, which reduces weight at the wheel end compared to a cast-iron caliper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish is used on the hub and rotor?\u003c\/strong\u003e The hub and rotor in this Dexter kit are zinc-plated, a finish intended to help resist corrosion in wet trailering environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-078-05 kit weigh?\u003c\/strong\u003e The complete kit weighs 22.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit come pre-assembled or do I need to combine separate parts?\u003c\/strong\u003e The K71-078-05 is sold as a complete wheel end kit, meaning the hub, rotor, and caliper are provided together as one part number for that wheel position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures this disc brake kit?\u003c\/strong\u003e This disc brake kit is manufactured by Dexter, part number K71-078-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake kit?\u003c\/strong\u003e The UPC for the Dexter K71-078-05 Disc Brake Kit is 876983006694.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the K71-078-05?\u003c\/strong\u003e The K71-078-05 falls under Dexter's Trailer Disc Brakes category, covering the hub, rotor, and caliper assembly for a trailer wheel end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose an aluminum caliper over a standard cast caliper?\u003c\/strong\u003e The aluminum caliper used in the K71-078-05 kit lowers the weight of the wheel end assembly, an advantage in unsprung weight compared to a heavier cast caliper.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262965979,"sku":"DEX-K71-078-05","price":330.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-3750lb-single-wheel-zinc-disc-brake-kit-with-caliper-and-trailer-buddy-with-bra-k71-078-05__83711.1747363800.500.750.jpg?v=1785329083"},{"product_id":"kodiak-7-000-lb-trailer-disc-brake-kit-8-1-2-integral-rotors-5-bolt-flange-dacromet-1-axle-2-wheels","title":"Kodiak by Dexter Disc Brake Kit, 7,000 lb Axles, 8-1\/2 Inch 5-Bolt Flange, Dacromet Coated, 1 Axle - K71-2H-133-7-8-DDD","description":"\u003cp\u003eThis is a complete disc brake kit from Kodiak by Dexter, part number K71-2H-133-7-8-DDD, built to equip one trailer axle rated for 7,000 pounds. It is designed for axles using an 8-1\/2 inch, 5-bolt hub flange pattern, making it a fit for trailer axles built to that specific bolt configuration. The kit's brake components are Dacromet coated, a corrosion-resistant finish commonly used on trailer brake hardware to help components hold up against road spray, moisture, and salt exposure over time.\u003c\/p\u003e\u003cp\u003eAs a 1-axle kit, it supplies the disc brake hardware needed for a single axle position rather than a full multi-axle trailer set, so buyers with tandem or triple-axle trailers should plan to order a matching kit for each additional axle. Because it is sold under the Kodiak by Dexter name with a Dexter part number, it is intended as a direct, brand-matched replacement or upgrade for trailer axles that call for this bolt pattern and load rating, rather than a universal or generic fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Kodiak by Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-2H-133-7-8-DDD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Load Capacity:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Circle Diameter:\u003c\/strong\u003e 8-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish:\u003c\/strong\u003e Dacromet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Coverage:\u003c\/strong\u003e 1 axle per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327600473\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles rated for 7,000 pounds using an 8-1\/2 inch, 5-bolt hub flange pattern.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this disc brake kit designed for?\u003c\/strong\u003e The Kodiak by Dexter kit K71-2H-133-7-8-DDD is designed for trailer axles rated for 7,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does this brake kit fit?\u003c\/strong\u003e This kit fits an 8-1\/2 inch, 5-bolt hub flange pattern, so it is intended for axles built to that specific bolt configuration rather than a universal fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes one kit cover both axles on a tandem trailer?\u003c\/strong\u003e No, K71-2H-133-7-8-DDD is a 1-axle kit, meaning it supplies disc brake hardware for a single axle position. Tandem or triple-axle trailers need a matching kit for each additional axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dacromet coating do?\u003c\/strong\u003e Dacromet is a corrosion-resistant coating applied to the brake hardware in this kit, intended to help the components resist rust and corrosion from road spray, moisture, and salt exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Kodiak by Dexter part?\u003c\/strong\u003e Yes, this kit is sold under the Kodiak by Dexter brand with manufacturer part number K71-2H-133-7-8-DDD.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit a 6,000 lb or 5,200 lb axle?\u003c\/strong\u003e K71-2H-133-7-8-DDD is rated for 7,000 lb axles with an 8-1\/2 inch, 5-bolt flange, so it is not specified as a fit for other axle capacities.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this brake kit?\u003c\/strong\u003e The UPC for the Kodiak by Dexter K71-2H-133-7-8-DDD disc brake kit is 840327600473.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I confirm this is the right disc brake kit for my trailer axle?\u003c\/strong\u003e Check that your trailer axle is rated for 7,000 pounds and uses an 8-1\/2 inch, 5-bolt hub flange pattern, since K71-2H-133-7-8-DDD is built to that specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit sold as a pair or for a single axle?\u003c\/strong\u003e K71-2H-133-7-8-DDD is packaged as a 1-axle kit, supplying the disc brake components for one axle rather than a pair.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263391963,"sku":"DEX-K71-2H-133-7-8-DDD","price":921.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Kodiak-Hub--Rotor-7000lbs-13-inch-One-Axle-Disc-Brake-Kit-by-Dexter-K71-2H-133-7-8-DDD__29294.1747363796.500.750.jpg?v=1785188930"},{"product_id":"dexter-k71-2h-10-ddd-10-integral-disc-brake-kit-dacromet-1-axle-for-3-500-3-700-lb-trailer-axles-bearings-seals-caps-included","title":"Dexter K71-2H-10-DDD 10 Inch Trailer Disc Brake Kit, One Axle Set, Dacromet Coated, Fits 3.5K-3.7K Axles","description":"\u003cp\u003eThe Dexter K71-2H-10-DDD is a complete one-axle trailer disc brake kit built around a 10 inch integral hub and rotor design, where the hub and rotor are machined as a single one-piece unit rather than a separate hub bolted to a rotor. The kit covers both wheel ends of one axle and is finished in a Dacromet (DAC) coating, a corrosion-resistant plating applied to the rotor, caliper, and mounting bracket to help the assembly hold up against road salt, moisture, and general trailer-towing exposure.\u003c\/p\u003e\u003cp\u003eEach side uses a caliper bracket that mounts to a standard 4-bolt brake flange, and the assembly is sized to fit inside 13 inch and larger trailer wheels. The wheel bolt pattern is 5 on 4.5 inches. This kit is intended for 3.5K-3.7K capacity trailer axles and comes as a full bearing and seal package rather than just brake hardware: it includes inner bearings, outer bearings, seals, dust caps, and lug nuts, so a single kit covers the rotating hardware for the axle along with the disc brake components.\u003c\/p\u003e\u003cp\u003eBecause bearing and seal requirements vary by axle manufacturer, note that UFP-brand axles require a different seal number than most of the rest of the trade uses for this same bearing set, which is called out below and in the FAQ so the correct seal ends up on the axle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-2H-10-DDD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailer Disc Brake Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Configuration:\u003c\/strong\u003e One Axle Kit (both wheel ends)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Size:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub and Rotor Design:\u003c\/strong\u003e Integral one-piece hub and rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Bolt Pattern:\u003c\/strong\u003e 5 on 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper Mounting:\u003c\/strong\u003e 4-bolt brake flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Clearance:\u003c\/strong\u003e Fits inside 13 inch and larger wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Dacromet (DAC) corrosion-resistant coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Bearing:\u003c\/strong\u003e L68149\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bearing:\u003c\/strong\u003e L44649\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e 171255TB (168255 required for UFP axles)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Bearings, seals, dust caps, and lug nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3.5K-3.7K trailer axles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 56.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327600404\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for 3.5K-3.7K capacity trailer axles, and sized to fit inside 13 inch and larger trailer wheels.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does this kit include?\u003c\/strong\u003e The Dexter K71-2H-10-DDD is a complete one-axle kit that includes the integral hub and rotor units, calipers, mounting brackets, inner and outer bearings, seals, dust caps, and lug nuts for both wheel ends of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake kit made for?\u003c\/strong\u003e This kit is sized for 3.5K-3.7K capacity trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes one kit cover both wheels on the axle, or just one side?\u003c\/strong\u003e Yes, the K71-2H-10-DDD is a one-axle kit, meaning it covers both wheel ends of a single axle, not just one wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rotor does this kit use?\u003c\/strong\u003e It uses a 10 inch rotor, built as an integral one-piece hub and rotor rather than a separate hub and rotor bolted together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit under a 13 inch wheel?\u003c\/strong\u003e The caliper and bracket assembly on the K71-2H-10-DDD is sized to fit inside 13 inch and larger trailer wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel bolt pattern does this kit use?\u003c\/strong\u003e The K71-2H-10-DDD uses a 5 on 4.5 inch wheel bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat coating is used on the brake components?\u003c\/strong\u003e The rotor, caliper, and mounting bracket are finished in a Dacromet (DAC) coating, which resists corrosion from road salt and moisture during towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing and seal numbers come with this kit?\u003c\/strong\u003e This kit includes inner bearing L68149, outer bearing L44649, and seal 171255TB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the seal number change depending on the axle brand?\u003c\/strong\u003e Yes. For the K71-2H-10-DDD kit, UFP-brand axles require seal number 168255, while the rest of the trade uses seal 171255TB with the same bearing set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the caliper bracket mount to the axle?\u003c\/strong\u003e The caliper bracket on this kit mounts to a standard 4-bolt brake flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake kit weigh?\u003c\/strong\u003e The complete Dexter K71-2H-10-DDD one-axle kit weighs 56.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required for this kit?\u003c\/strong\u003e Yes, assembly is required to install the K71-2H-10-DDD components onto the axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263719643,"sku":"DEX-K71-2H-10-DDD","price":555.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Kodiak-Hub--Rotor-3700lbs-10-inch-One-Axle-Disc-Brake-Kit-by-Dexter-K71-2H-10-DDD__15396.1747363796.500.750.jpg?v=1785188993"},{"product_id":"dexter-k71-773-01-left-hand-disc-brake-caliper-assembly-kit-db35-zinc-plated-for-3-500-lb-to-7-000-lb-trailer-axles","title":"Dexter K71-773-01 Caliper Assembly Kit, Left Hand, DB-35 Disc Brake, 3.7K-7K Axles, Zinc Plated","description":"\u003cp\u003eThe Dexter K71-773-01 is a complete left hand caliper assembly kit built for Dexter DB-35 disc brake trailer axles rated from 3.7K through 7K. This kit supplies the left side caliper assembly as a single unit, so it is a direct fit for trailer owners replacing a worn, corroded, or damaged caliper without having to source individual internal components separately. The assembly carries a zinc plated finish, which helps resist the corrosion that trailer brake hardware is regularly exposed to from road spray, launching, and retrieving boats or equipment trailers in wet and salt environments.\u003c\/p\u003e\u003cp\u003eBecause this is the left hand (LH) specific caliper assembly, it is designed to mount on the left side of the trailer axle only. The right hand caliper assembly is a separate part with its own part number, so trailer owners servicing both sides of a DB-35 brake axle will need to order the correct left and right assemblies individually rather than assuming one kit covers both sides.\u003c\/p\u003e\u003cp\u003eThis caliper assembly kit is intended for trailer maintenance and brake system rebuilds where the left side caliper needs to be replaced as a complete unit. It is sold as an assembly to simplify installation and help ensure proper fit and function on compatible Dexter DB-35 disc brake axles within the 3.7K to 7K capacity range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-773-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Model:\u003c\/strong\u003e DB-35 Disc Brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 3.7K thru 7K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983005765\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich side does the Dexter K71-773-01 caliper assembly fit?\u003c\/strong\u003e The K71-773-01 is the left hand (LH) caliper assembly, so it mounts on the left side of the trailer axle only. The right hand side uses a separate Dexter part number, so order the matching right hand assembly separately if you are servicing both sides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake model is this caliper assembly built for?\u003c\/strong\u003e This kit is built for Dexter DB-35 disc brakes, covering axle capacities from 3.7K thru 7K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-773-01 a complete caliper or just parts?\u003c\/strong\u003e It is a complete caliper assembly kit, meaning the left hand caliper is supplied as a full assembled unit rather than individual internal components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Dexter K71-773-01 caliper have?\u003c\/strong\u003e The caliper assembly has a zinc plated finish, which is intended to help resist corrosion in wet and road-spray conditions typical of trailer brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-773-01 caliper assembly weigh?\u003c\/strong\u003e The K71-773-01 left hand caliper assembly weighs 10.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the K71-773-01 on the right side of my trailer axle?\u003c\/strong\u003e No. The K71-773-01 is specifically the left hand caliper assembly and is not interchangeable with the right hand side, which requires its own separate Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle weight ratings is this caliper compatible with?\u003c\/strong\u003e The Dexter K71-773-01 DB-35 caliper assembly is rated for axles from 3.7K thru 7K capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K71-773-01 genuine Dexter brand?\u003c\/strong\u003e Yes, the K71-773-01 is a genuine Dexter part, manufactured by Dexter for DB-35 disc brake trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-773-01 caliper assembly?\u003c\/strong\u003e The UPC for this left hand DB-35 caliper assembly kit is 876983005765.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace both calipers at the same time?\u003c\/strong\u003e The K71-773-01 covers only the left hand caliper; if the right hand caliper on your DB-35 axle also needs replacement, that requires the separate right hand assembly part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263785179,"sku":"DEX-K71-773-01","price":162.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-K71-773-01__49059.1747363843.500.750.jpg?v=1785329087"},{"product_id":"dexter-k71-773-01-right-hand-caliper-assembly-kit-db-35-disc-brakes-for-3-700-to-7-000-lb-axles-zinc-plated","title":"Dexter K71-773-01 Right-Hand Caliper Assembly Kit, DB35 Disc Brake, 3.7K-7K Axle, Zinc","description":"\u003cp\u003eThe Dexter K71-773-01 is a right-hand (curb-side) caliper assembly kit built for Dexter DB35 trailer disc brakes on axles rated from 3.7K through 7K pounds. It is designed as a complete caliper assembly for this side of the axle, giving trailer owners a direct way to replace a worn, seized, or corroded caliper without sourcing individual internal components separately.\u003c\/p\u003e\u003cp\u003eThe kit carries a zinc finish, which helps the housing resist the corrosion that trailer brake components are constantly exposed to in wet boat-ramp and roadway environments -- a key consideration for boat trailers and other trailers that see regular submersion or salt exposure.\u003c\/p\u003e\u003cp\u003eBecause this is a right-hand specific assembly, it is not interchangeable with a left-hand caliper kit; the two sides use separate part numbers and must be matched to the correct wheel position when ordering. This kit is intended for Dexter DB35 disc brake systems within the 3.7K to 7K axle capacity range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-773-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Caliper Assembly Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Model:\u003c\/strong\u003e DB35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 3.7K thru 7K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.34 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDexter DB35 disc brake systems\u003c\/li\u003e\n\u003cli\u003eAxles rated 3.7K thru 7K\u003c\/li\u003e\n\u003cli\u003eRight-hand (curb-side) wheel position only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat side does the Dexter K71-773-01 caliper kit fit?\u003c\/strong\u003e The K71-773-01 is a right-hand (curb-side) caliper assembly kit only. It is not interchangeable with a left-hand caliper, which uses a separate Dexter part number, so confirm which side of the axle needs replacement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake model is this caliper kit designed for?\u003c\/strong\u003e This kit is built for Dexter DB35 trailer disc brakes, part number K71-773-01.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the K71-773-01 rated for?\u003c\/strong\u003e It is intended for axles rated from 3.7K through 7K pounds when used with a Dexter DB35 disc brake setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the caliper assembly kit weigh?\u003c\/strong\u003e The Dexter K71-773-01 caliper assembly kit weighs 10.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete caliper or just replacement hardware?\u003c\/strong\u003e K71-773-01 is a complete caliper assembly kit, sold as the full right-hand caliper unit rather than individual internal parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the K71-773-01 caliper have?\u003c\/strong\u003e The caliper housing has a zinc finish, which is intended to resist corrosion in the wet, salt-exposed conditions typical of trailer brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this caliper be used on a boat trailer?\u003c\/strong\u003e Yes, the Dexter K71-773-01 is suited to trailer applications, including boat trailers, running a Dexter DB35 disc brake within the 3.7K to 7K axle range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace both calipers at the same time?\u003c\/strong\u003e The K71-773-01 is sold as a single right-hand unit; the opposite side requires its own left-hand Dexter caliper kit with a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-773-01 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-773-01 is the Dexter manufacturer part number for this right-hand DB35 caliper assembly kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms indicate this caliper needs replacement?\u003c\/strong\u003e A caliper on a Dexter DB35 system typically needs replacement when it is worn, seized, or corroded to the point that it no longer applies even braking force; the K71-773-01 kit replaces the complete right-hand caliper assembly in that case.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263883483,"sku":"DEX-K71-773-02","price":162.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-K71-773-02__35403.1780061466.500.750.jpg?v=1785329086"},{"product_id":"ufp-by-dexter-db35-left-hand-aluminum-disc-brake-caliper-kit-k71-776-01-fits-3-7k-7k-marine-trailer-axles","title":"UFP by Dexter K71-776-01 Left-Hand Aluminum Disc Brake Caliper Kit for DB35 3.7K-7K Boat Trailer Axles","description":"\u003cp\u003eThe UFP by Dexter K71-776-01 is a left-hand aluminum disc brake caliper replacement kit built for DB35 boat trailer disc brakes on axles rated from 3.7K to 7K. This is the left side caliper only; the right side is a separate part number, so confirm which side needs service before ordering. The kit ships as a complete assembly rather than a bare caliper, including the caliper body, mounting bolts, and a set of marine grade brake pads, so a single purchase covers the parts needed to restore stopping power on one wheel position without hunting down bolts or pads separately. The aluminum caliper body resists the corrosion that steel calipers are prone to in saltwater and brackish launch conditions, which is the main reason boat trailer brake components are built from aluminum rather than the cast iron common on automotive applications. The included marine grade pads are matched to the DB35 caliper and are rated for the same submersion and corrosion exposure the caliper itself sees during boat launching and retrieval. Because this is a left-hand specific kit, installing it on the right side of the trailer will not seat or align correctly, so buyers should verify the worn caliper's side before ordering a replacement. The kit is intended as a direct service replacement for the left-hand DB35 caliper on trailers within the 3.7K to 7K axle capacity range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e UFP by Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-776-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Side:\u003c\/strong\u003e Left-Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Model:\u003c\/strong\u003e DB35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 3.7K to 7K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad Type:\u003c\/strong\u003e Marine grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Caliper assembly, mounting bolts, marine grade brake pads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.07 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983005826\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits DB35 boat trailer disc brakes on axles rated 3.7K to 7K, left-hand side only.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-776-01 for the left or right side of the trailer?\u003c\/strong\u003e The K71-776-01 is a left-hand specific caliper kit and should only be installed on the left side of the trailer; the right side uses a different part number, so confirm which caliper is worn before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake system does this caliper kit fit?\u003c\/strong\u003e This kit is built for DB35 boat trailer disc brakes on axles rated from 3.7K to 7K, so it is intended for that specific caliper and brake model rather than as a universal fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-776-01 kit?\u003c\/strong\u003e The kit includes the caliper assembly, mounting bolts, and a set of marine grade brake pads, so no separate pad or hardware purchase is needed for a left-side caliper replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the caliper body made from?\u003c\/strong\u003e The K71-776-01 caliper body is aluminum, which is more resistant to saltwater corrosion than the steel or cast iron calipers used on automotive brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the brake pads included rated for marine use?\u003c\/strong\u003e Yes, the pads included with the K71-776-01 kit are marine grade, matched to the corrosion and submersion exposure a boat trailer caliper sees during launch and retrieval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-776-01 caliper kit weigh?\u003c\/strong\u003e The complete K71-776-01 kit weighs 9.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity range is this caliper designed for?\u003c\/strong\u003e The K71-776-01 DB35 left-hand caliper kit is designed for axles in the 3.7K to 7K capacity range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used on the right side if I only have one bad caliper?\u003c\/strong\u003e No. The K71-776-01 is left-hand specific and will not align correctly on the right side; a matching right-hand kit is a separate part number and should be ordered for that side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine UFP by Dexter part or an aftermarket copy?\u003c\/strong\u003e The K71-776-01 is a genuine UFP by Dexter caliper kit, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come fully assembled or do I need to build the caliper myself?\u003c\/strong\u003e The K71-776-01 is supplied as a caliper assembly kit with the caliper, bolts, and pads included, so it is ready to install as a left-hand unit rather than requiring separate component sourcing.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264014555,"sku":"DEX-K71-776-01","price":237.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-3500-7000lb-Left-Hand-Caliper-Replacement-Kit-K71-776-01__35875.1747363800.500.750.jpg?v=1785188213"},{"product_id":"dexter-premier-12-disc-brake-end-kit-with-backing-plate-for-5-200-6-000-lb-trailer-axles-k71-895-00","title":"Dexter Premier Disc Brake Kit, 5.2K-6K, 12 Inch End Kit w\/ BP, K71-895-00","description":"\u003cp\u003eThe Dexter K71-895-00 is a Premier Disc Brake Kit rated for 5.2K-6K trailer axles, supplied as a 12 inch End Kit w\/ BP. It is manufactured by Dexter, a recognized name in trailer axle and brake components, and is intended for use on trailer axle assemblies within the stated 5.2K-6K capacity range. As a 12 inch End Kit, this part corresponds to the 12 inch brake size and is configured for a single axle end. The kit weighs 43.5 pounds as shipped.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-895-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 5.2-6K Premier Disc Brake Kit, 12 Inch End Kit w\/ BP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Rating:\u003c\/strong\u003e 5.2K-6K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Configuration:\u003c\/strong\u003e End Kit w\/ BP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 43.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983015382\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-895-00?\u003c\/strong\u003e It is a Dexter Premier Disc Brake Kit, listed as the 5.2K-6K, 12 inch End Kit w\/ BP, part number K71-895-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake kit rated for?\u003c\/strong\u003e The Dexter K71-895-00 Premier Disc Brake Kit carries a 5.2K-6K capacity rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake size is the K71-895-00 kit?\u003c\/strong\u003e This kit is the 12 inch size, sold as a 12 Inch End Kit w\/ BP under Dexter part number K71-895-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'End Kit' mean for the K71-895-00?\u003c\/strong\u003e End Kit indicates this Dexter K71-895-00 part is configured for one axle end, as opposed to a full-axle kit covering both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-895-00 brake kit weigh?\u003c\/strong\u003e The Dexter K71-895-00 Premier Disc Brake Kit weighs 43.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-895-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-895-00 is a genuine Dexter manufacturer part number for this Premier Disc Brake Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-895-00 kit?\u003c\/strong\u003e The UPC for the Dexter K71-895-00 Premier Disc Brake Kit is 876983015382.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the '5.2-6K' rating on this Dexter kit mean?\u003c\/strong\u003e 5.2-6K identifies the axle capacity range for which the Dexter K71-895-00 Premier Disc Brake Kit is rated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'w\/ BP' mean in the K71-895-00 product name?\u003c\/strong\u003e The Dexter K71-895-00 is listed by the manufacturer as an End Kit w\/ BP, indicating that designation as part of its official product name.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264145627,"sku":"DEX-K71-895-00","price":445.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/all_part__38954.1747363842.500.750.jpg?v=1785329091"},{"product_id":"dexter-k71-890-00-premier-3-500-lb-10-disc-brake-end-kit-with-backing-plate","title":"Dexter K71-890-00 3.5K Premier Disc Brake Kit, 10 Inch End Kit with Backing Plate","description":"\u003cp\u003eThe Dexter K71-890-00 is a Premier-series disc brake kit built for 3.5K (3,500 lb) trailer axle applications. Supplied as a 10 inch end kit with backing plate, it provides the core hardware needed to fit or rebuild one hub end of a trailer's disc brake system. Dexter's Premier line is engineered for trailer axle duty, giving trailer owners, fabricators, and repair shops a direct-fit kit for 3,500 lb rated axles using a 10 inch rotor\/caliper package.\u003c\/p\u003e\u003cp\u003eBecause it is supplied as an end kit, the K71-890-00 is intended to outfit a single wheel end assembly rather than a full axle, making it a practical option when only one side needs new brake components or when building up a trailer axle end by end.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-890-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Premier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Disc Brake Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 10 inch end kit with backing plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Rating:\u003c\/strong\u003e 3,500 lb (3.5K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 29.8 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-890-00?\u003c\/strong\u003e It is a Dexter Premier 3.5K disc brake kit, supplied as a 10 inch end kit with backing plate for one wheel end of a trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the K71-890-00 rated for?\u003c\/strong\u003e The K71-890-00 is rated for 3.5K, meaning a 3,500 lb axle capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rotor does this kit use?\u003c\/strong\u003e The Dexter K71-890-00 is configured as a 10 inch end kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-890-00 include a backing plate?\u003c\/strong\u003e Yes, the K71-890-00 is supplied with a backing plate as part of the end kit configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit cover a full axle or one wheel end?\u003c\/strong\u003e The K71-890-00 is an end kit, meaning it is built to outfit a single wheel end rather than both ends of an axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-890-00 weigh?\u003c\/strong\u003e The K71-890-00 end kit weighs 29.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-890-00 part of a specific Dexter product line?\u003c\/strong\u003e Yes, it is part of Dexter's Premier line of disc brake kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake kit genuine Dexter or aftermarket?\u003c\/strong\u003e The K71-890-00 is a genuine Dexter Premier disc brake kit, identified by its Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWould I need two of these to brake a full axle?\u003c\/strong\u003e Since the K71-890-00 is a single end kit, a full axle with brakes on both sides would require a matching kit for the other wheel end.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264211163,"sku":"DEX-K71-890-00","price":406.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-3-5k-10-inch-disc-brake-kit-parts-included__16300.1747363839.500.750.jpg?v=1785329087"},{"product_id":"dexter-kodiak-k71-dbc-250-d-brake-caliper-7-000-8-000-lb-axle-2-1-2-piston-dacromet-plated","title":"Dexter K71-DBC-250-D Brake Caliper, 7000-8000 lb Axle Rating, 2.5 Inch Piston, Dacromet Plated","description":"\u003cp\u003eThe Dexter K71-DBC-250-D is a heavy-duty disc brake caliper built for trailer axles rated between 7,000 and 8,000 pounds. It is engineered around a 2.5 inch piston diameter, roughly 30 percent larger than standard trailer caliper pistons, which increases the clamping force delivered to the rotor and improves stopping power under heavier loads. The caliper body is cast iron for strength and rigidity, and the entire unit is finished with Dacromet plating, a corrosion-resistant coating that holds up in both freshwater and saltwater environments, making it a suitable choice for boat trailers and other trailers regularly exposed to road spray, wash-down, and launch ramps.\u003c\/p\u003e\u003cp\u003eThis caliper is designed to work with 13 inch diameter rotors, so it should be matched with a rotor of that size for correct operation. It is intended as a direct component in a Dexter\/Kodiak-style disc brake assembly for axles in the 7,000-8,000 pound range, and is commonly used when replacing a worn or corroded caliper on a heavy-duty single or tandem axle trailer. Precision machining and quality cast iron construction are intended to provide reliable, repeatable braking performance over the life of the part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-DBC-250-D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Rating:\u003c\/strong\u003e 7,000 to 8,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston Diameter:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Compatibility:\u003c\/strong\u003e 13 inch diameter rotors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dacromet plating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 x 4 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.32 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327600794\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Disc Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle rating is the Dexter K71-DBC-250-D brake caliper designed for?\u003c\/strong\u003e The K71-DBC-250-D is designed for trailer axles rated between 7,000 and 8,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size piston does this caliper use?\u003c\/strong\u003e It uses a 2.5 inch diameter piston, about 30 percent larger than standard trailer brake caliper pistons, which increases braking force.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rotor size does the K71-DBC-250-D work with?\u003c\/strong\u003e This caliper is engineered to work with 13 inch diameter rotors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K71-DBC-250-D suitable for saltwater use, such as on a boat trailer?\u003c\/strong\u003e Yes, the caliper is finished with Dacromet plating, which provides corrosion resistance in both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the K71-DBC-250-D caliper made from?\u003c\/strong\u003e The caliper body is cast iron, chosen for strength and durability under heavy braking loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-DBC-250-D weigh?\u003c\/strong\u003e The K71-DBC-250-D weighs 14.32 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this brake caliper?\u003c\/strong\u003e The K71-DBC-250-D measures 5 x 4 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter K71-DBC-250-D come with mounting hardware or pads included?\u003c\/strong\u003e The K71-DBC-250-D is the caliper itself; specific included hardware or pads are not specified beyond the caliper unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the K71-DBC-250-D different from a standard trailer brake caliper?\u003c\/strong\u003e Its 2.5 inch piston is about 30 percent larger than standard options, giving it more clamping force for heavier 7,000-8,000 pound axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand and part number should I reference when ordering this caliper?\u003c\/strong\u003e Reference Dexter part number K71-DBC-250-D when ordering this caliper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K71-DBC-250-D be used on lighter-rated trailer axles?\u003c\/strong\u003e The K71-DBC-250-D is built and rated specifically for 7,000-8,000 pound axles; it is not specified for lighter axle ratings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish protects the K71-DBC-250-D from corrosion?\u003c\/strong\u003e A Dacromet plated finish protects the K71-DBC-250-D from rust and corrosion in wet and marine environments.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264309467,"sku":"DEX-K71-DBC-250-D","price":130.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Kodiak-7000-to-8000lbs-Dacromet-Caliper-Kit-K71-DBC-250-D__25633.1747363795.500.750.jpg?v=1785188259"},{"product_id":"kodiak-k71-dbc-225-d-dac-disc-brake-caliper-kit-3-500-6-000-lb-axles-10-in-12-in-rotors-2-1-4-in-stainless-piston","title":"Kodiak K71-DBC-225-D Disc Brake Caliper Kit, 3,500-6,000 lb Axle Capacity, Fits 10-12 in Rotors","description":"\u003cp\u003eThe Kodiak K71-DBC-225-D is a boxed disc brake caliper kit built for boat trailer axles rated between 3,500 and 6,000 pounds. The caliper body is cast iron for durability under repeated marine trailer use, and it is fitted with a 2-1\/4 inch stainless steel piston for consistent clamping force. A Dacromet plating covers the assembly, providing corrosion resistance for trailers that see regular exposure to both freshwater and saltwater boat ramps.\u003c\/p\u003e\u003cp\u003eThis caliper is engineered to work with 10 inch and 12 inch diameter rotors, covering the common rotor sizes used on trailers in this axle capacity range. It ships loaded, meaning it comes assembled with ceramic friction pads already installed, so it is ready to mount once received. The kit is packaged as a boxed unit; any additional mounting hardware or components beyond the caliper assembly itself are sold separately.\u003c\/p\u003e\u003cp\u003eThe K71-DBC-225-D is intended as a direct caliper kit for 3,500-6,000 lb axle series trailer brake systems, giving trailer owners a complete, corrosion-resistant caliper solution without having to source the piston, pads, and housing individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Kodiak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-DBC-225-D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Boxed Disc Brake Caliper Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3,500 - 6,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Compatibility:\u003c\/strong\u003e 10 inch and 12 inch diameter rotors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston Diameter:\u003c\/strong\u003e 2-1\/4 inches, stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlating\/Finish:\u003c\/strong\u003e Dacromet corrosion-resistant plating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFriction Pads:\u003c\/strong\u003e Ceramic, included (loaded assembly)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327600763\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3,500 - 6,000 lb axle series\u003c\/li\u003e\n\u003cli\u003e10 inch and 12 inch diameter rotors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the Kodiak K71-DBC-225-D caliper kit rated for?\u003c\/strong\u003e The Kodiak K71-DBC-225-D is rated for 3,500 to 6,000 pound axles, making it suited to boat trailers in that capacity range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-DBC-225-D come with brake pads installed?\u003c\/strong\u003e Yes, this caliper kit ships loaded with ceramic friction pads already installed and ready to mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rotor sizes fit the Kodiak K71-DBC-225-D caliper?\u003c\/strong\u003e It is engineered to work with both 10 inch and 12 inch diameter rotors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size piston does this caliper use?\u003c\/strong\u003e The K71-DBC-225-D uses a 2-1\/4 inch stainless steel piston.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Kodiak K71-DBC-225-D caliper body made of?\u003c\/strong\u003e The caliper body is cast iron, providing a durable housing for the piston and pad assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this caliper suitable for saltwater trailer use?\u003c\/strong\u003e Yes, the K71-DBC-225-D is finished with Dacromet plating for corrosion resistance in both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-DBC-225-D caliper kit weigh?\u003c\/strong\u003e The boxed kit weighs 11.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the box dimensions for this caliper kit?\u003c\/strong\u003e The Kodiak K71-DBC-225-D ships in a box measuring 7 x 7 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle series is the K71-DBC-225-D designed for?\u003c\/strong\u003e This caliper kit is designed for the 3,500-6,000 lb axle series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Kodiak K71-DBC-225-D caliper kit?\u003c\/strong\u003e The UPC for this product is 840327600763.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-DBC-225-D a complete, ready-to-install caliper?\u003c\/strong\u003e Yes, it is a loaded caliper assembly with ceramic pads installed, though additional mounting components are sold separately.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264342235,"sku":"DEX-K71-DBC-225-D","price":137.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Kodiak-3500-to-6000lbs-Dacromet-Caliper-By-Dexter-K71-DBC-225-D__22519.1747363795.500.750.jpg?v=1785189084"},{"product_id":"dexter-k71-g00-43-g5-stainless-steel-2-disc-brake-assembly-for-trailers-single-wheel-kit-with-mounting-bracket","title":"Dexter 12 Inch Disc Brake Assembly K71-G00-43 for G5 Trailer Axles","description":"\u003cp\u003eThe Dexter K71-G00-43 is a complete 12 inch disc brake assembly built for G5 trailer axle applications, sold as a single-wheel kit. Each assembly pairs a single piston aluminum caliper with a patented bimetal aluminum and stainless steel piston, riding on oil impregnated bronze bushings and factory pre-installed stainless steel slider pins for smooth, consistent engagement over time. The caliper is fitted with ceramic brake pads backed by stainless steel plates, delivering steady stopping power while resisting the heat and wear that come with repeated trailer braking.\u003c\/p\u003e\u003cp\u003eThe stainless steel rotor includes venting holes to promote faster cooling during use, reducing brake fade on longer tows. The hub carries a GalvX coating and the mounting bracket is galvanized, giving the assembly corrosion protection suited to trailer environments, including boat ramp exposure. Precision bearings, seals, and grease are factory installed, so the kit arrives ready to mount without additional bearing pack-out. Because this is a G5-caliper assembly, it also serves as an upgrade path for earlier G4 caliper setups, replacing the G4 caliper with the newer G5 caliper and lifetime pads. Each K71-G00-43 kit covers one wheel; a matching kit is required for the opposite wheel position to complete a full axle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G00-43\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Diameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper Type:\u003c\/strong\u003e Single piston aluminum caliper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston Material:\u003c\/strong\u003e Bimetal aluminum and stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad Material:\u003c\/strong\u003e Ceramic with stainless steel backing plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Material:\u003c\/strong\u003e Oil impregnated bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlider Pins:\u003c\/strong\u003e Stainless steel, factory pre-installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Finish:\u003c\/strong\u003e GalvX coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bracket Finish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Material:\u003c\/strong\u003e Stainless steel with venting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings and Seals:\u003c\/strong\u003e Precision bearings, seals, and grease factory installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 (one wheel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13.8 x 12.3 x 6.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628820928\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-G00-43 disc brake assembly include?\u003c\/strong\u003e The K71-G00-43 is a complete single-wheel kit that includes a single piston aluminum caliper, a stainless steel rotor with venting holes, ceramic pads with stainless steel backing plates, a GalvX coated hub, and a galvanized mounting bracket. Precision bearings, seals, and grease are factory installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit cover one wheel or both wheels on the axle?\u003c\/strong\u003e Each K71-G00-43 assembly is packaged for one wheel only. A second, matching kit is needed to equip the opposite wheel of the same axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rotor size is used on this assembly?\u003c\/strong\u003e This Dexter disc brake assembly uses a 12 inch stainless steel rotor with venting holes designed to speed up cooling under repeated braking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the brake pads made from?\u003c\/strong\u003e The K71-G00-43 uses ceramic brake pads with stainless steel backing plates for consistent friction performance and reduced corrosion at the backing plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this assembly be used to upgrade an older G4 caliper setup?\u003c\/strong\u003e Yes. The G5 caliper used in the K71-G00-43 assembly replaces the earlier G4 caliper and comes with lifetime pads, making it suitable as an upgrade kit for trailers originally equipped with G4 calipers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearings and seals already installed on this brake kit?\u003c\/strong\u003e Yes, the K71-G00-43 ships with precision bearings, seals, and grease factory installed, so no separate bearing pack-out is required before mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat corrosion protection does this brake assembly have?\u003c\/strong\u003e The hub on the K71-G00-43 has a GalvX coating and the mounting bracket is galvanized, both intended to resist corrosion in trailer and boat ramp environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the piston material in the caliper?\u003c\/strong\u003e The single piston aluminum caliper on the K71-G00-43 uses a patented bimetal aluminum and stainless steel piston, riding on oil impregnated bronze bushings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G00-43 disc brake assembly weigh?\u003c\/strong\u003e This assembly weighs 30 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the slider pins made of on this brake assembly?\u003c\/strong\u003e The K71-G00-43 uses stainless steel slider pins that are factory pre-installed in the caliper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake assembly for the front or rear of the trailer?\u003c\/strong\u003e The K71-G00-43 disc brake assembly is designated for the rear position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for this brake kit?\u003c\/strong\u003e The K71-G00-43 ships in a package measuring 13.8 inches by 12.3 inches by 6.3 inches.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264604379,"sku":"DEX-K71-G00-43","price":566.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41E4eE1PJvL.jpg?v=1784498654"},{"product_id":"kodiak-dbc-225-ceramic-disc-brake-pad-kit-fits-3-500-6-000-lb-trailer-axles-10-in-12-in-rotors-4-pads-mpn-k71-dbc-225-pad","title":"Dexter Kodiak K71-DBC-225-PAD Ceramic Disc Brake Pad Set for 3,500-6,000 lb Trailer Axles","description":"\u003cp\u003eThe Dexter Kodiak K71-DBC-225-PAD is a ceramic replacement brake pad set built for the Kodiak 225 disc brake caliper used on 3,500 - 6,000 lb capacity trailer axles. The set uses a ceramic friction lining designed to resist fade and wear under repeated trailer stops, paired with a Dacromet-coated backing plate that guards against the corrosion trailer brakes are constantly exposed to from road spray, salt, and moisture. Each kit includes 2 inner pads and 2 outer pads, giving you a complete pad set for one caliper. Because the pads are packaged on their own, they are intended as a direct pad replacement for an existing Kodiak 225 caliper rather than a full caliper assembly. This makes routine brake maintenance straightforward: swap in fresh ceramic pads without replacing the caliper housing itself, extending the service life of your trailer's disc brake system. The K71-DBC-225-PAD is cross-referenced to the OEM equivalent part number DBC-225-CERM-PAD, so it is a drop-in match for trailers and axle assemblies already spec'd for that pad. It is a straightforward maintenance item for boat, utility, and equipment trailers running Kodiak 225-series disc brakes rated to 3,500 - 6,000 lbs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-DBC-225-PAD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Kodiak by Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Ceramic friction lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate Finish:\u003c\/strong\u003e Dacromet coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 inner pads, 2 outer pads (services 1 caliper)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3,500 - 6,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e DBC-225-CERM-PAD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eKodiak 225 disc brake calipers on trailer axles rated 3,500 - 6,000 lbs\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDBC-225-CERM-PAD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the K71-DBC-225-PAD brake pad set rated for?\u003c\/strong\u003e The Dexter Kodiak K71-DBC-225-PAD is rated for trailer axles with a capacity of 3,500 to 6,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pads come in the K71-DBC-225-PAD kit?\u003c\/strong\u003e The kit includes 4 pads total: 2 inner pads and 2 outer pads, enough to service one Kodiak 225 disc brake caliper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the pads made from?\u003c\/strong\u003e K71-DBC-225-PAD uses a ceramic friction lining on a Dacromet-coated backing plate for corrosion resistance in wet trailer environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include the caliper?\u003c\/strong\u003e No. The K71-DBC-225-PAD is a pad set only; the Kodiak 225 caliper and other caliper components are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-DBC-225-PAD the same as the DBC-225-CERM-PAD?\u003c\/strong\u003e Yes, the OEM equivalent part number for the Dexter Kodiak K71-DBC-225-PAD is DBC-225-CERM-PAD, so it cross-references directly to that part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake pad set weigh?\u003c\/strong\u003e The K71-DBC-225-PAD ceramic brake pad set weighs 2.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these pads fit any trailer disc brake caliper?\u003c\/strong\u003e No, the K71-DBC-225-PAD is designed specifically for Kodiak 225 disc brake calipers on axles rated 3,500 - 6,000 lbs, not other Kodiak caliper sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose ceramic pads over standard friction pads?\u003c\/strong\u003e Ceramic friction linings, like those used in the K71-DBC-225-PAD, generally hold up better to repeated braking and resist wear compared to standard organic pad materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K71-DBC-225-PAD is a genuine Dexter part number sold under the Kodiak by Dexter brake product line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow often should trailer disc brake pads be replaced?\u003c\/strong\u003e Replacement timing depends on usage and towing conditions; when pads on a Kodiak 225 caliper show visible wear, the K71-DBC-225-PAD provides a direct ceramic pad replacement.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264669915,"sku":"DEX-K71-DBC-225-PAD","price":41.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Kodiak-by-Dexter-3500-to-6000bs-E-Coat-Ceramic-Disc-Brake-Pads-K71-DBC-225-PAD__20581.1747363795.500.750.jpg?v=1785188031"},{"product_id":"kodiak-dbc-250-ceramic-disc-brake-pad-kit-7k-8k-trailer-axles-13-disc-brakes-2-inner-2-outer-one-axle-set","title":"Kodiak Ceramic Disc Brake Pad Kit K71-DBC-250-PAD, Fits 7000-8000 lb Trailer Axles (OEM DBC-250)","description":"\u003cp\u003eThis Kodiak ceramic disc brake pad kit, part number K71-DBC-250-PAD, is a replacement friction pad set for trailer axles rated 7000-8000 lb equipped with 13 inch Kodiak disc brake assemblies. The kit uses a ceramic friction lining bonded to a Dacromet-coated backing plate, which resists corrosion in the wet, road-salt, and boat-launch conditions trailer brakes are routinely exposed to. Each kit contains two inner pads and two outer pads, providing a complete pad set to service one axle. The pads are designed to work with Kodiak DBC-250-E and DBC-250-DAC caliper assemblies, making this kit the correct replacement choice when relining calipers on a heavy-duty boat or utility trailer axle. Ceramic friction material is chosen for disc brake pad kits like this one because it produces less brake dust and wears more gradually than standard semi-metallic compounds, while still delivering consistent stopping power under repeated trailer braking cycles (launching and retrieving a boat, stop-and-go towing, or emergency stops on the road). Because trailer axles typically use one pad kit per axle, most tandem-axle trailers require two kits, one for each axle, to complete a full brake job. This kit is sold as a direct fit for the 7000-8000 lb Kodiak disc brake platform and is not interchangeable with pad kits built for lighter-duty 3500-6000 lb axle assemblies, which use a different part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Kodiak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-DBC-250-PAD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e DBC-250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Ceramic Friction Lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate Finish:\u003c\/strong\u003e Dacromet Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 Inner Pads, 2 Outer Pads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Weight Rating:\u003c\/strong\u003e 7000-8000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Brake Assembly Size:\u003c\/strong\u003e 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Calipers:\u003c\/strong\u003e Kodiak DBC-250-E, DBC-250-DAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Coverage:\u003c\/strong\u003e Services 1 axle per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat Trailer, Trailer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327600619\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7000-8000 lb trailer axles equipped with Kodiak 13 inch disc brake assemblies\u003c\/li\u003e\n\u003cli\u003eUse with Kodiak DBC-250-E or DBC-250-DAC caliper assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDBC-250\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axles does the K71-DBC-250-PAD pad kit fit?\u003c\/strong\u003e The K71-DBC-250-PAD kit fits trailer axles rated 7000-8000 lb that are equipped with Kodiak 13 inch disc brake assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs DBC-250 the same as K71-DBC-250-PAD?\u003c\/strong\u003e DBC-250 is the OEM equivalent part number for this kit, so K71-DBC-250-PAD is the correct replacement kit when a Kodiak DBC-250 caliper assembly needs new pads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pads come in this kit?\u003c\/strong\u003e Each K71-DBC-250-PAD kit includes 2 inner pads and 2 outer pads, enough to service one axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need one kit or two for a tandem-axle trailer?\u003c\/strong\u003e Since one K71-DBC-250-PAD kit services a single axle, a tandem-axle trailer with two axles requires two kits to complete the brake job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat caliper assemblies is this pad kit designed for?\u003c\/strong\u003e This kit is designed for use with Kodiak DBC-250-E or DBC-250-DAC caliper assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the friction material made of?\u003c\/strong\u003e The K71-DBC-250-PAD kit uses a ceramic friction lining, chosen for lower dust and longer wear life compared to standard friction compounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the backing plate coating on these pads?\u003c\/strong\u003e The backing plate on the K71-DBC-250-PAD pads is Dacromet coated for corrosion resistance in wet trailering environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this pad kit weigh?\u003c\/strong\u003e The K71-DBC-250-PAD kit weighs 3.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on a lighter-duty 3500-6000 lb axle?\u003c\/strong\u003e No, the K71-DBC-250-PAD kit is built for the 7000-8000 lb axle platform; lighter-duty 3500-6000 lb axles use a different pad kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer is this pad kit intended for?\u003c\/strong\u003e This kit is intended for boat trailers and utility trailers using Kodiak disc brake assemblies rated for 7000-8000 lb axles.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264866523,"sku":"DEX-K71-DBC-250-PAD","price":73.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Kodiak-8000lbs-E-Coat-Ceramic-Disc-Brake-Pads-Dexter-K71-DBC-250-PAD__50918.1747363795.500.750.jpg?v=1785188490"},{"product_id":"permatex-ultra-disc-brake-lube-5oz-silicone-brake-caliper-grease-perm85188","title":"Permatex Ultra Disc Brake Lube 5oz Silicone Brake Caliper Grease PERM85188","description":"\u003cp\u003ePermatex Ultra Disc Brake Lube (PERM85188) is a 100% silicone lubricant designed for use with disc brake systems to help provide proper function under adverse conditions. It lubricates critical metal-to-metal contact areas on brake hardware, helping to eliminate brake squealing and prevent the seizing and sticking of disc brake components. Because it is made from 100% silicone, it stays effective at the metal-to-metal wear points where standard grease can break down or wash out.\u003c\/p\u003e\u003cp\u003eThis brake lubricant is ideal for caliper pins, hardware, and the back side of brake pads, keeping these contact points moving freely so the caliper can float and retract as designed. It comes in a 5oz size and is formulated to be environmentally friendly while still delivering the lubrication needed for quiet, consistent brake performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Permatex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e PERM85188\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Brake Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 5 ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 686226851888\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Use:\u003c\/strong\u003e Disc brake caliper pins, hardware, and brake pad backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Benefit:\u003c\/strong\u003e Prevents disc brake squealing and component seizing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex Ultra Disc Brake Lube used for?\u003c\/strong\u003e Permatex Ultra Disc Brake Lube (PERM85188) is used to lubricate critical metal-to-metal contact areas in disc brake systems, including caliper pins, hardware, and the back side of brake pads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this stop my brakes from squealing?\u003c\/strong\u003e Yes, preventing disc brake squealing is one of the primary purposes of PERM85188 - it lubricates the contact points that commonly cause squeal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Permatex Ultra Disc Brake Lube made of?\u003c\/strong\u003e It is made from 100% silicone, which is why it is labeled a silicone brake lubricant rather than a petroleum-based grease.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one container hold?\u003c\/strong\u003e PERM85188 comes in a 5oz size, making it enough for multiple brake service jobs on caliper pins and hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this lubricant be used on brake pads directly?\u003c\/strong\u003e It is intended for the back side of brake pads (the backing plate), not the friction surface, along with caliper pins and hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake lube help prevent caliper hardware from seizing?\u003c\/strong\u003e Preventing seizing and sticking of disc brake components is a stated function of Permatex Ultra Disc Brake Lube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Permatex Ultra Disc Brake Lube environmentally friendly?\u003c\/strong\u003e Yes, the product is described as an environmentally friendly, 100% silicone formula.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does PERM85188 weigh?\u003c\/strong\u003e The 5oz container of Permatex Ultra Disc Brake Lube weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat areas of a disc brake system benefit most from this lube?\u003c\/strong\u003e Caliper pins, brake hardware, and the metal-to-metal contact areas on the back of the brake pads benefit most, since these are the common sources of noise and sticking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Permatex product?\u003c\/strong\u003e Yes, this listing is for genuine Permatex Ultra Disc Brake Lube, part number PERM85188, with UPC 686226851888.\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":49028203708635,"sku":"PER-85188","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/PER-85188__35842.1747363846.500.750.jpg?v=1785165310"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/PER-85188__35842.1747363846.500.750.jpg?v=1785356542","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trailering-trailer-brakes-disc-brake-assemblies-parts.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}