{"title":"Drum Brake Assemblies \u0026 Parts","description":null,"products":[{"product_id":"dexter-023-105-09-12-x-2-6k-left-hand-electric-drum-brake-assembly-6-000-lb","title":"Dexter 12 Inch x 2 Inch 6000 lb Left Hand Electric Drum Brake Assembly - 023-105-09","description":"\u003cp\u003eThe Dexter 023-105-09 is a complete 12 inch x 2 inch electric drum brake assembly rated for 6,000 lb (6K) axle capacity, built for the left hand (LH) side of a trailer axle. This is a full brake assembly, not a repair kit, so it is intended for direct installation as a complete unit rather than a rebuild of an existing worn brake. Electric drum brakes of this type use a magnet-actuated shoe system that engages when the trailer's electric brake controller sends current to the magnet, drawing the shoes into contact with the drum for stopping power that is proportional to the controller's output. The 12 inch x 2 inch designation refers to the drum diameter and shoe width, which must match the trailer's hub and drum dimensions for correct fit. Because this is designated a left hand assembly, it is built for one specific side of the trailer axle; a right hand (RH) counterpart is sold as a separate, differently numbered assembly, so confirming the LH designation before ordering ensures the correct part arrives for the intended wheel position. The assembly weighs 14 pounds. Trailer owners and fleet maintenance operators use assemblies like this to replace a damaged, corroded, or failed brake unit on 6,000 lb rated axles where a full assembly swap is preferred over piecemeal part replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-105-09\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Drum Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 6,000 lbs (6K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327614067\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-105-09 a left or right side brake?\u003c\/strong\u003e The Dexter 023-105-09 is a left hand (LH) electric drum brake assembly, built for the left side of the trailer axle only. A right hand version is a separate part with a different part number, so confirm the LH designation before ordering to get the correct side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer drum does this brake fit?\u003c\/strong\u003e This assembly is sized for a 12 inch x 2 inch drum, meaning a 12 inch drum diameter and a 2 inch wide brake shoe, which is the Dexter 023-105-09 configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake rated for?\u003c\/strong\u003e The 023-105-09 is rated for 6,000 lb (6K) axle capacity, matching Dexter's 12 inch x 2 inch electric brake line for that load rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come as a complete assembly or just replacement shoes?\u003c\/strong\u003e This is a complete electric drum brake assembly, not a shoe-only repair kit, so the full unit is included for direct installation on the left side of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-105-09 weigh?\u003c\/strong\u003e The assembly weighs 14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does an electric drum brake like this one work?\u003c\/strong\u003e An electric drum brake uses a magnet mounted inside the assembly that is energized by the trailer's brake controller; when current flows to the magnet, it pulls the actuating arm to draw the shoes into the drum, and stopping force increases with the current the controller sends, which describes how the 023-105-09 assembly operates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this brake on a right hand hub position?\u003c\/strong\u003e No. The 023-105-09 is built specifically as a left hand assembly and should not be installed on a right hand hub position; a separate right hand Dexter part number is needed for that side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake assembly?\u003c\/strong\u003e The UPC for the Dexter 023-105-09 left hand electric drum brake assembly is 840327614067.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake assembly made by Dexter?\u003c\/strong\u003e Yes, this is a genuine Dexter brake assembly, part number 023-105-09.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trailer applications is a 12 inch x 2 inch 6K electric brake used on?\u003c\/strong\u003e A 12 inch x 2 inch 6,000 lb electric drum brake assembly such as the 023-105-09 is used on trailer axles rated for that 6K capacity where the hub and drum are sized to accept a 12 inch x 2 inch brake.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256969435,"sku":"DEX-023-105-09","price":145.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_894b6ba7-e60c-4883-9b9f-2bfc854a60fa.jpg?v=1785349554"},{"product_id":"dexter-023-566-00-12-x-2-hydraulic-trailer-brake-assembly-6k-left-hand-manual-adjust-complete","title":"Dexter 023-566-00 12 x 2 Inch 6K Hydraulic Left Hand Trailer Drum Brake Assembly","description":"\u003cp\u003eThe Dexter 023-566-00 is a complete 12 x 2 inch hydraulic trailer drum brake assembly rated for 6,000 lb (6K) axle applications. This is the left hand (LH) side unit only, built for trailers using US-manufactured, manually adjusted drum brake hardware. As a complete assembly, it is designed to be installed as a full replacement unit rather than requiring separate purchase of individual internal components. The 12 inch drum diameter and 2 inch shoe width match the common 12 x 2 hydraulic brake platform used on 6,000 lb rated trailer axles, and the manual adjustment design allows the brake shoe clearance to be set and maintained through routine service. Because this unit is manufactured specifically for the left hand side of the trailer, it is not interchangeable with a right hand assembly; installing the correct side is required for proper brake function and even braking side to side. Trailer owners replacing worn-out or damaged hydraulic drum brakes on a 6K axle, or upgrading a trailer to a complete matched hydraulic brake set, can use this assembly as the left side component of that setup. Always confirm axle capacity, drum diameter, and side (left vs. Right) before ordering to ensure correct fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-566-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Complete Hydraulic Trailer Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShoe Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 6,000 pounds (6K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Manual adjust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e US-manufactured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151235110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-566-00 for the left or right side of the trailer?\u003c\/strong\u003e The Dexter 023-566-00 is a left hand (LH) side brake assembly only. It is not the same part as a right hand assembly, so make sure you are ordering the correct side for your axle position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is this?\u003c\/strong\u003e This is a 12 x 2 inch drum brake assembly, meaning a 12 inch drum diameter with 2 inch wide brake shoes, part number 023-566-00 from Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity is this brake rated for?\u003c\/strong\u003e The Dexter 023-566-00 is rated for 6,000 pounds (6K), matching the common capacity rating for 12 x 2 inch hydraulic trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a hydraulic or electric brake?\u003c\/strong\u003e It is a hydraulic brake assembly, not an electric brake, as indicated by the hydraulic actuation of the 023-566-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come as a complete assembly or just individual parts?\u003c\/strong\u003e The 023-566-00 is sold as a complete brake assembly, not individual components, so it is intended to be installed as a full replacement unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the brake shoe clearance adjusted on this unit?\u003c\/strong\u003e This Dexter brake assembly uses a manual adjust design, meaning shoe-to-drum clearance is set and maintained through manual adjustment rather than a self-adjusting mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-566-00 weigh?\u003c\/strong\u003e The complete assembly weighs 13.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this brake assembly manufactured?\u003c\/strong\u003e The Dexter 023-566-00 is a US-manufactured hydraulic trailer brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on a right side axle position?\u003c\/strong\u003e No. The 023-566-00 is built specifically for the left hand side; a right hand version would be a separate, differently numbered part, and using the wrong side will not seat or function correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer is this brake designed for?\u003c\/strong\u003e It is designed for trailers using 12 x 2 inch, 6,000 lb rated hydraulic drum brakes, part number 023-566-00 on the left hand side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Dexter 023-566-00 left hand hydraulic brake assembly is 106151235110.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257002203,"sku":"DEX-023-566-00","price":128.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_12d342fd-c9a9-442a-98bf-d8295ebf6dfb.jpg?v=1785349554"},{"product_id":"dexter-12-x-2-6k-electric-trailer-brake-assembly-right-hand-complete-backing-plate-with-park-mpn-023-106-09","title":"Dexter 12 x 2 Inch Right Hand Electric Drum Brake Assembly, 6,000 lb Capacity (023-106-09)","description":"\u003cp\u003eThe Dexter 023-106-09 is a 12 inch x 2 inch right hand (RH) electric drum brake assembly rated for 6,000 pounds. This is the electric brake unit itself, the core braking component used to build out a trailer axle's electric brake system, and it is designated specifically for the right-hand side of the trailer. Because it is a side-specific part, it is not interchangeable with the left hand version, which is sold under its own separate part number.\u003c\/p\u003e\u003cp\u003eThis brake assembly is the right hand (RH) component used in Dexter's complete 12 inch x 2 inch electric brake assembly with parking brake, 6,000 lb kit (kit K23-112-00), which combines the RH electric brake, a hex nut, a plug, and an instruction sheet into a full installation set. Ordering the 023-106-09 assembly on its own is intended for replacement of just the brake unit rather than the full kit's hardware.\u003c\/p\u003e\u003cp\u003eElectric drum brakes like this one work by using an electromagnet mounted to the backing plate that engages the brake drum when the trailer's electric brake controller applies current, producing consistent, controllable stopping power that scales with the amount of current applied. This makes them a common choice for trailer axles rated in the 6,000 lb range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-106-09\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 6,000 pounds (6K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric drum brake assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327614081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Application:\u003c\/strong\u003e Component of Dexter's complete 12 inch x 2 inch electric brake assembly with parking brake, 6,000 lb (kit K23-112-00)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-106-09 a right hand or left hand brake?\u003c\/strong\u003e The 023-106-09 is a right hand (RH) electric drum brake assembly. It is not interchangeable with the left hand side, which Dexter sells as a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer brake is this?\u003c\/strong\u003e This is a 12 inch x 2 inch electric drum brake assembly, part number 023-106-09.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is the 023-106-09 rated for?\u003c\/strong\u003e 6,000 pounds (6K), matching Dexter's 12 x 2 electric brake assembly rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake assembly weigh?\u003c\/strong\u003e The Dexter 023-106-09 electric drum brake assembly weighs 13.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the parking brake hardware and mounting hex nut?\u003c\/strong\u003e The 023-106-09 is the electric brake assembly only. Dexter also offers it as part of a complete kit (K23-112-00) that bundles the right hand brake assembly with a hex nut, a plug, and an instruction sheet for a full 12 x 2 electric brake assembly with parking brake, 6,000 lb setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 023-106-09 on the left side of my trailer?\u003c\/strong\u003e No. The 023-106-09 is designated right hand (RH); the left hand brake assembly is a different Dexter part number, so make sure to order the correct side for each end of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an electric brake or hydraulic brake?\u003c\/strong\u003e The Dexter 023-106-09 is an electric drum brake assembly, designed to work with a trailer's electric brake controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The Dexter 12 x 2 right hand electric drum brake assembly (023-106-09) has UPC 840327614081.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 023-106-09 genuine Dexter equipment?\u003c\/strong\u003e Yes, the 023-106-09 is a genuine Dexter part, Dexter's own manufacturer part number for this 12 x 2, 6,000 lb right hand electric drum brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 023-106-09?\u003c\/strong\u003e Ordering 023-106-09 gets you the right hand electric drum brake assembly itself; it does not include the additional hardware (hex nut, plug, instruction sheet) that ships with Dexter's full K23-112-00 kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257067739,"sku":"DEX-023-106-09","price":145.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_0138aba1-792b-4f95-8d9c-aff1b2606d42.jpg?v=1785349554"},{"product_id":"dexter-040-419-00-hydraulic-front-brake-shoe-10-x-2-1-4-trailer-brake-shoe","title":"Dexter 10 x 2-1\/4 Inch Hydraulic Front Trailer Brake Shoe, Part 040-419-00","description":"\u003cp\u003eThe Dexter 040-419-00 is a hydraulic trailer brake shoe sized 10 x 2-1\/4 inches and designated for the front position. It is manufactured by Dexter, a supplier of trailer axle and brake components, and is built to fit the dimensional specification of a 10 x 2-1\/4 inch hydraulic brake assembly. Because trailer brake shoes must match both the drum diameter and shoe width exactly to seat and actuate correctly, ordering by the correct size and position (front vs. Rear) is essential for proper brake function. This shoe weighs 1.5 pounds. Use it when servicing or rebuilding a hydraulic trailer brake assembly that calls for a 10 x 2-1\/4 inch front shoe bearing Dexter part number 040-419-00.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040-419-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Brake Shoe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter 040-419-00 brake shoe?\u003c\/strong\u003e The Dexter 040-419-00 is sized 10 x 2-1\/4 inches, matching the drum diameter and shoe width it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040-419-00 shoe for the front or rear position?\u003c\/strong\u003e This shoe is designated for the front position. If you need a shoe for the rear position, that is a separate Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shoe work with hydraulic or electric trailer brakes?\u003c\/strong\u003e Part number 040-419-00 is a hydraulic brake shoe, built for hydraulic trailer brake assemblies rather than electric brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040-419-00 brake shoe weigh?\u003c\/strong\u003e It weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures part 040-419-00?\u003c\/strong\u003e Part number 040-419-00 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this shoe?\u003c\/strong\u003e The manufacturer part number is 040-419-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 040-419-00 a genuine Dexter part or an aftermarket copy?\u003c\/strong\u003e It is a genuine Dexter part, manufactured by Dexter under part number 040-419-00, not a third-party aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the front\/rear position matter when ordering this shoe?\u003c\/strong\u003e The Dexter 040-419-00 is built specifically for the front position; installing a front shoe where a rear shoe is required (or vice versa) can affect fit, so confirm position before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 10 x 2-1\/4 inch size need to match my existing shoes exactly?\u003c\/strong\u003e Yes, the 040-419-00 is sized 10 x 2-1\/4 inches, and this dimension must match your brake assembly's drum diameter and shoe width for a correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake assembly is the 040-419-00 shoe used in?\u003c\/strong\u003e The 040-419-00 is a hydraulic front brake shoe, used as a component in a 10 x 2-1\/4 inch hydraulic trailer brake assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257100507,"sku":"DEX-040-419-00","price":28.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_ec61c5fc-18b1-4aa0-a053-d4e0bf618948.jpg?v=1785349554"},{"product_id":"dexter-040-402-00-hydraulic-trailer-brake-shoe-8-1-2-in-x-2-1-4-in-free-backing","title":"Dexter 8-1\/2 x 2-1\/4 Inch Hydraulic Brake Shoe, Free Backing","description":"\u003cp\u003eThis Dexter hydraulic brake shoe is sized 8-1\/2 x 2-1\/4 inches and is designated Free Backing, part number 040-402-00. It is built for trailer axle hydraulic brake assemblies that use this shoe size, giving trailer owners a direct replacement shoe when relining or rebuilding a hydraulic drum brake. The shoe carries the Dexter part number 040-402-00 for straightforward reordering, and at 1.1 pounds it is sized for a single shoe unit rather than a full axle set, so buyers should confirm how many shoes their brake assembly requires before ordering. As a Dexter-branded component, it is manufactured to the dimensional specification (8-1\/2 x 2-1\/4 inches) that Dexter hydraulic brake systems of this shoe size are built around. This part is intended for use in servicing existing Dexter hydraulic brake assemblies where the shoe size matches 8-1\/2 x 2-1\/4 inches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040-402-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 8-1\/2 x 2-1\/4 Hydraulic Shoe, Free Backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShoe Size:\u003c\/strong\u003e 8-1\/2 x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Free Backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151123590\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this Dexter brake shoe?\u003c\/strong\u003e The Dexter hydraulic brake shoe, part number 040-402-00, is sized 8-1\/2 x 2-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040-402-00 brake shoe weigh?\u003c\/strong\u003e This Dexter hydraulic brake shoe weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 040-402-00 is a genuine Dexter branded hydraulic brake shoe, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Free Backing mean for this shoe?\u003c\/strong\u003e Free Backing is part of the product designation for Dexter shoe 040-402-00, identifying this specific shoe configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the part number 040-402-00 apply to a single shoe or a full set?\u003c\/strong\u003e Part number 040-402-00 is listed at 1.1 pounds, consistent with a single 8-1\/2 x 2-1\/4 inch shoe unit; check how many shoes your brake assembly needs before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake shoe?\u003c\/strong\u003e The UPC for the Dexter 8-1\/2 x 2-1\/4 hydraulic shoe, Free Backing (040-402-00), is 106151123590.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I identify the correct replacement shoe for my Dexter hydraulic brakes?\u003c\/strong\u003e Match the shoe dimensions to 8-1\/2 x 2-1\/4 inches, the size of Dexter part 040-402-00, to confirm it is the correct replacement for your assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shoe be used to rebuild an existing hydraulic drum brake?\u003c\/strong\u003e Yes, the Dexter 040-402-00 hydraulic shoe is intended for servicing and rebuilding hydraulic drum brake assemblies that use the 8-1\/2 x 2-1\/4 inch shoe size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 040-402-00 the manufacturer part number I should use to order?\u003c\/strong\u003e Yes, 040-402-00 is the Dexter manufacturer part number to reference when ordering this 8-1\/2 x 2-1\/4 inch hydraulic shoe.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257329883,"sku":"DEX-040-402-00","price":48.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-040-402-00__89408.1780061500.500.750.jpg?v=1785329081"},{"product_id":"10-in-x-2-1-4-in-hydraulic-free-backing-drum-brake-assembly-left-hand-3-500-lb-axle-mpn-023-544-00","title":"Dexter 023-544-00 Hydraulic Trailer Drum Brake Assembly, Left Hand, 10 x 2-1\/4 Inch, 3.5K","description":"\u003cp\u003eThe Dexter 023-544-00 is a complete hydraulic trailer drum brake assembly built for the left-hand (driver's) side of a trailer axle. It measures 10 inches in diameter by 2-1\/4 inches thick and carries a 44 square inch pad lining area, sized for a 3.5K axle application. The assembly is finished in black paint and is manually adjustable, arriving as a complete, ready-to-mount unit rather than a kit of loose parts.\u003c\/p\u003e\u003cp\u003eThis drum brake is designed for use with hydraulic brake actuators that do not include a reverse lockout, since the assembly itself allows the trailer to be backed up without actuating the brake. The 3 inch center hole diameter and overall design suit trailers running 13, 14, or 15 inch wheels. Because it is a left-hand assembly, it is intended for the driver's side of the trailer only; the right-hand (passenger's side) counterpart is a separate part number and should not be substituted for this one.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-544-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Trailer Drum Brake Assembly, Complete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (Driver's Side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad Lining Area:\u003c\/strong\u003e 44 square inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Hole Diameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size Compatibility:\u003c\/strong\u003e 13, 14, or 15 inch wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Rating:\u003c\/strong\u003e 3.5K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Manual adjust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black-painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.58 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailers using a 3.5K axle with 13, 14, or 15 inch wheels\u003c\/li\u003e\n\u003cli\u003eHydraulic brake actuators without a built-in reverse lockout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-544-00 a left-side or right-side brake assembly?\u003c\/strong\u003e The 023-544-00 is a left-hand assembly, meaning it mounts on the driver's side of the trailer. The passenger's (right-hand) side uses a different Dexter part number, so be sure to order the correct side for each end of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is this?\u003c\/strong\u003e The Dexter 023-544-00 measures 10 inches in diameter by 2-1\/4 inches thick, with a 3 inch center hole diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes does this brake assembly work with?\u003c\/strong\u003e This brake assembly is sized to fit trailers running 13, 14, or 15 inch wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the 023-544-00 rated for?\u003c\/strong\u003e The Dexter 023-544-00 is built for a 3.5K axle application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake come fully assembled?\u003c\/strong\u003e Yes, the 023-544-00 is a complete hydraulic drum brake assembly, not a kit of individual components, so it arrives ready to mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I back up my trailer without the brakes engaging?\u003c\/strong\u003e Yes. This drum brake design allows the trailer to be reversed without the brake actuating, which is needed when your hydraulic brake actuator does not include a reverse lockout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pad lining area on this brake assembly?\u003c\/strong\u003e The Dexter 023-544-00 has a 44 square inch pad lining area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake assembly self-adjusting?\u003c\/strong\u003e No, the 023-544-00 uses a manual adjustment, not a self-adjusting mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-544-00 weigh?\u003c\/strong\u003e This brake assembly weighs 9.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this drum brake have?\u003c\/strong\u003e The 023-544-00 has a black-painted finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a hydraulic or electric brake assembly?\u003c\/strong\u003e The 023-544-00 is a hydraulic drum brake assembly, intended for use with hydraulic brake actuators.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257362651,"sku":"DEX-023-544-00","price":110.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/811wBu8s50L.jpg?v=1784498177"},{"product_id":"dexter-12-x-2-hydraulic-trailer-drum-brake-assembly-6-000-lb-right-hand-manual-adjust-complete-mpn-023-567-00","title":"Dexter 12 x 2 Inch 6K Hydraulic Right Hand Trailer Drum Brake Assembly with Manual Adjuster, 023-567-00","description":"\u003cp\u003eThe Dexter 023-567-00 is a complete 12 inch x 2 inch hydraulic drum brake assembly built for 6,000 pound capacity trailer axles. This is the right hand unit, engineered with a manual adjuster rather than a self-adjusting mechanism, so brake shoe clearance is set by hand as the linings wear. As a complete assembly, it is supplied ready to mount to the axle backing plate, eliminating the need to source individual internal components separately.\u003c\/p\u003e\u003cp\u003eHydraulic drum brakes of this type are the primary service brake on many single and tandem axle trailers rated at or near 6,000 pounds, converting hydraulic line pressure from the trailer's master cylinder or actuator into mechanical clamping force against the brake drum. The 12 x 2 inch shoe sizing refers to the drum diameter and shoe width this assembly is designed to work within. Because this is a side-specific part, it is not interchangeable with the left hand version of the same assembly, which carries a different Dexter part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-567-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 6,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation Type:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjuster Type:\u003c\/strong\u003e Manual Adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Type:\u003c\/strong\u003e Complete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151231000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is the Dexter 023-567-00?\u003c\/strong\u003e It is a 12 inch x 2 inch hydraulic drum brake assembly, sized for 6,000 pound capacity trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a left or right side brake assembly?\u003c\/strong\u003e The Dexter 023-567-00 is the right hand assembly. The left hand version of this 12 x 2 inch, 6K hydraulic brake is a separate Dexter part number and the two are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake use a self-adjusting mechanism?\u003c\/strong\u003e No. The Dexter 023-567-00 uses a manual adjuster, meaning brake shoe clearance is set by hand rather than automatically as the linings wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-567-00 a complete brake assembly?\u003c\/strong\u003e Yes, it is sold as a complete assembly, so all of the internal hydraulic brake components for the right hand side are included as one unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake assembly weigh?\u003c\/strong\u003e The Dexter 023-567-00 weighs 13.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake rated for?\u003c\/strong\u003e This Dexter drum brake assembly is rated for 6,000 pound (6K) capacity trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake hydraulic or electric?\u003c\/strong\u003e The 023-567-00 is a hydraulic drum brake assembly, actuated by hydraulic line pressure rather than an electric brake controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake assembly?\u003c\/strong\u003e The UPC for the Dexter 023-567-00 right hand hydraulic drum brake assembly is 106151231000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this on the left side of my trailer?\u003c\/strong\u003e No. The 023-567-00 is manufactured specifically as the right hand assembly; installing it on the left side would not correctly fit, since Dexter produces the left hand version as a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 12 x 2 mean for this brake?\u003c\/strong\u003e 12 x 2 describes the brake's drum diameter and shoe width dimensions, in inches, for the Dexter 023-567-00 assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257395419,"sku":"DEX-023-567-00","price":128.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_6186a882-ff08-4294-8383-0617b19dedf6.jpg?v=1785349559"},{"product_id":"dexter-10-x-2-1-4-hydraulic-free-backing-trailer-brake-assembly-right-hand-3-500-lb-axle-fits-13-14-15-wheels-023-499-00","title":"Dexter 023-499-00 10 Inch Left Hand Hydraulic Trailer Drum Brake Assembly","description":"\u003cp\u003eThe Dexter 023-499-00 is a complete 10 inch hydraulic trailer drum brake assembly built for the left-hand (driver's) side of the trailer axle. It is designed to work with hydraulic brake actuators that do not include a reverse lockout, so the assembly can reverse freely without the actuator engaging the brakes. The unit measures 10 inches wide and 2-1\/4 inches thick, with a 3 inch center hole diameter and 44 square inches of pad lining area for consistent stopping power. It fits most trailers running 13 inch, 14 inch, or 15 inch wheels, making it a common replacement across a range of boat, utility, and cargo trailer axles. The assembly comes with a black-painted finish for corrosion resistance during outdoor and marine trailer use.\u003c\/p\u003e\u003cp\u003eBecause this is a left-hand assembly, it must be paired with a separate right-hand assembly (a different part number) for the opposite side of the axle -- installing the wrong side will not seat or actuate correctly. This complete assembly simplifies replacement by supplying the full brake unit rather than individual components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-499-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left hand (driver's side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Hole Diameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad Lining Area:\u003c\/strong\u003e 44 square inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size Compatibility:\u003c\/strong\u003e 13 inch, 14 inch, or 15 inch wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black-painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Hydraulic drum brake assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.43 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-499-00 a left or right side brake assembly?\u003c\/strong\u003e The Dexter 023-499-00 is a left-hand (driver's side) hydraulic trailer drum brake assembly. The right-hand side of the axle requires a separate assembly with a different part number, so be sure to order the matching side for the passenger\/curb side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes does this drum brake assembly fit?\u003c\/strong\u003e This 10 inch hydraulic drum brake assembly fits trailers running 13 inch, 14 inch, or 15 inch wheels, covering a wide range of common trailer wheel sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pad lining area on the 023-499-00 brake assembly?\u003c\/strong\u003e The pad lining area is 44 square inches, which is the braking surface used to generate stopping power on the 10 inch drum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-499-00 drum brake assembly weigh?\u003c\/strong\u003e This complete drum brake assembly weighs 9.43 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this brake assembly be used with a hydraulic actuator that has a reverse lockout?\u003c\/strong\u003e No. The Dexter 023-499-00 is designed for hydraulic brake actuators that do not include a reverse lockout, allowing the trailer to be backed up without the actuator engaging the brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this drum brake assembly?\u003c\/strong\u003e The Dexter 023-499-00 measures 10 inches wide and 2-1\/4 inches thick, with a 3 inch center hole diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 023-499-00 come as a complete assembly or individual parts?\u003c\/strong\u003e It is sold as a complete hydraulic drum brake assembly, not individual replacement components, simplifying installation on the left side of the trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this trailer brake assembly have?\u003c\/strong\u003e The assembly has a black-painted finish, intended to help resist corrosion in outdoor and marine trailer environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 023-499-00 suitable for boat trailers?\u003c\/strong\u003e Yes, this 10 inch hydraulic drum brake assembly is commonly used on boat, utility, and cargo trailers that use 13, 14, or 15 inch wheels and a hydraulic surge brake system without reverse lockout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the center hole diameter of this drum brake?\u003c\/strong\u003e The center hole diameter on the Dexter 023-499-00 drum brake assembly is 3 inches.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257428187,"sku":"DEX-023-499-00","price":71.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/811wBu8s50L_143d8b5c-519c-456e-9f7f-df967f755ef7.jpg?v=1784498181"},{"product_id":"10-in-x-2-1-4-in-3-500-lb-hydraulic-drum-brake-assembly-right-hand-complete-dexter-023-609-00","title":"Dexter 10 x 2-1\/4 Inch Hydraulic Trailer Brake Assembly, Right Hand, 3.5K, Manual Adjust - 023-609-00","description":"\u003cp\u003eThe Dexter 023-609-00 is a complete 10 x 2-1\/4 inch hydraulic trailer brake assembly built for the right-hand (RH) side of a 3,500 lb (3.5K) rated trailer axle. This is a full brake assembly rather than a single component, so it is intended as a direct replacement for a worn or damaged right-hand hydraulic brake on trailers within the Dexter 3.5K brake size family.\u003c\/p\u003e\u003cp\u003eThis unit uses a manual-adjust design, meaning brake shoe clearance is set by hand rather than through a self-adjusting mechanism, so periodic manual adjustment is part of normal maintenance for this brake. It is designated specifically for the right-hand side of the trailer; it is not interchangeable with a left-hand brake, which is a separate part.\u003c\/p\u003e\u003cp\u003eBecause this is sold as a complete assembly, it is intended to simplify replacement by supplying the full 10 x 2-1\/4 inch hydraulic brake unit in one part rather than requiring separate sourcing of individual components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-609-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 023-609-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 10 x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3,500 lb (3.5K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Manual Adjust (US Man Adj)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Type:\u003c\/strong\u003e Complete assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.76 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles using the Dexter 10 x 2-1\/4 inch, 3,500 lb hydraulic brake size on the right-hand side only.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-609-00 a complete brake assembly or a single part?\u003c\/strong\u003e The 023-609-00 is sold as a complete 10 x 2-1\/4 inch hydraulic trailer brake assembly, not a single individual component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake fit the left or right side of the trailer?\u003c\/strong\u003e This is the right-hand (RH) specific brake assembly. It is not for left-hand installation; the left-hand version is a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the Dexter 023-609-00 rated for?\u003c\/strong\u003e It is rated for 3,500 lb (3.5K) trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a hydraulic or electric trailer brake?\u003c\/strong\u003e The 023-609-00 is a hydraulic brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake shoes does the 023-609-00 use?\u003c\/strong\u003e It is built in the 10 x 2-1\/4 inch brake size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 023-609-00 self-adjust?\u003c\/strong\u003e No. It uses a manual-adjust design, so brake shoe clearance must be set by hand rather than automatically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-609-00 weigh?\u003c\/strong\u003e The complete assembly weighs 8.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the right-hand 023-609-00 be installed on both sides of the trailer?\u003c\/strong\u003e No. It is designated for the right-hand side only and should not be used in place of a left-hand brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the 023-609-00?\u003c\/strong\u003e It falls under trailer drum brakes, specifically as a complete hydraulic brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs routine maintenance required on the Dexter 023-609-00?\u003c\/strong\u003e Yes. Because it uses a manual-adjust mechanism, periodic manual adjustment of the brake shoes is part of normal upkeep.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257460955,"sku":"DEX-023-609-00","price":110.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_0f525339-dbca-4410-8de7-929766fdbdc4.jpg?v=1785349559"},{"product_id":"dexter-054-156-00-hydraulic-wheel-cylinder-push-rod-for-trailer-brake-actuators","title":"Dexter Hydraulic Wheel Cylinder Push Rod 054-156-00 for Trailer Brake Actuators","description":"\u003cp\u003eThe Dexter 054-156-00 is a hydraulic wheel cylinder push rod used in trailer brake actuator assemblies. The push rod is the mechanical link between the hydraulic wheel cylinder piston and the brake shoe, transferring the force generated by hydraulic pressure into the mechanical movement that applies the brake shoe against the drum. As the actuator builds hydraulic pressure, the push rod extends to press the shoe outward; when pressure releases, it retracts to allow the shoe to return to its resting position.\u003c\/p\u003e\u003cp\u003eThis is a lightweight component at 0.07 pounds, sized to fit within the wheel cylinder bore and actuator housing of the trailer brake assembly it is designed for. Because push rods see repeated cyclic loading every time the brakes are applied, replacing a worn, bent, or corroded push rod with the correct Dexter part helps maintain proper shoe engagement and consistent braking performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 054-156-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 054-156-00 used for?\u003c\/strong\u003e It is a hydraulic wheel cylinder push rod, part number 054-156-00, used inside a trailer brake actuator to transfer force from the wheel cylinder piston to the brake shoe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this push rod weigh?\u003c\/strong\u003e The Dexter push rod 054-156-00 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 054-156-00?\u003c\/strong\u003e Part number 054-156-00 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is this?\u003c\/strong\u003e This item is listed under trailer brake actuators, since the push rod is a component within that assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a wheel cylinder push rod work?\u003c\/strong\u003e The push rod extends when hydraulic pressure builds in the wheel cylinder, pressing the brake shoe outward against the drum, and retracts as pressure releases so the shoe returns to its resting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this push rod?\u003c\/strong\u003e A push rod that is worn, bent, or corroded can prevent proper shoe engagement, so replacing it with the Dexter 054-156-00 helps restore consistent brake actuator performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 054-156-00 the correct part number to order?\u003c\/strong\u003e Yes, 054-156-00 is the Dexter part number for this hydraulic wheel cylinder push rod.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this push rod come with mounting hardware?\u003c\/strong\u003e The listing covers the Dexter 054-156-00 push rod itself; no additional hardware is specified.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257592027,"sku":"DEX-054-156-00","price":3.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-0978300_lg__37977.1558140294.500.750.jpg?v=1785329085"},{"product_id":"adjuster-spring-for-dexter-10-x-2-1-4-and-12-x-2-electric-trailer-brakes-no-parking-mpn-046-018-00","title":"Dexter Adjuster Spring 046-018-00, Red, for 10 x 2-1\/4 Inch and 12 x 2 Inch Electric Brakes","description":"\u003cp\u003eThe Dexter Adjuster Spring, part number 046-018-00, is a replacement brake spring used on Dexter electric trailer brake assemblies. This spring is finished in red and is sized to fit Dexter 10 inch x 2-1\/4 inch and 12 inch x 2 inch electric brakes without the parking feature. It functions as part of the brake adjuster mechanism, helping maintain proper spring tension so the brake shoes hold their adjustment and operate consistently.\u003c\/p\u003e\u003cp\u003eThis adjuster spring is also supplied as one of the components in the Dexter Brake Spring Kit, alongside the Shoe Hold Down Spring Cup (046-077-00), Retractor Spring (046-084-00), and Magnet Spring (046-175-00), which together restore full spring tension to a Dexter 10 x 2-1\/4 inch or 12 x 2 inch electric brake assembly without parking feature. Buyers replacing worn or corroded brake springs on Dexter trailer brakes can use this part individually or alongside the other kit components for a complete spring refresh.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046-018-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Description:\u003c\/strong\u003e Spring, Adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327619352\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Dexter 10 x 2-1\/4 inch and 12 x 2 inch electric brakes without parking feature\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDexter 10 inch x 2-1\/4 inch electric brakes without parking feature\u003c\/li\u003e\n\u003cli\u003eDexter 12 inch x 2 inch electric brakes without parking feature\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat brakes does the Dexter 046-018-00 adjuster spring fit?\u003c\/strong\u003e The Dexter 046-018-00 adjuster spring fits Dexter 10 inch x 2-1\/4 inch and 12 inch x 2 inch electric brakes without the parking feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this adjuster spring?\u003c\/strong\u003e Dexter part number 046-018-00 is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 046-018-00 adjuster spring weigh?\u003c\/strong\u003e It weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this spring sold individually or only as part of a kit?\u003c\/strong\u003e The Dexter 046-018-00 Adjuster Spring is available on its own and is also one of the components included in the Dexter Brake Spring Kit for 10 x 2-1\/4 inch and 12 x 2 inch electric brakes without parking feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other springs are included in the Dexter Brake Spring Kit that uses this part?\u003c\/strong\u003e The kit that includes the 046-018-00 Adjuster Spring also contains the 046-077-00 Shoe Hold Down Spring Cup, the 046-084-00 Retractor Spring, and the 046-175-00 Magnet Spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this spring work on brakes with a parking feature?\u003c\/strong\u003e No. The Dexter 046-018-00 adjuster spring is designed for 10 x 2-1\/4 inch and 12 x 2 inch electric brakes without the parking feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the function of the adjuster spring on a Dexter electric brake?\u003c\/strong\u003e The 046-018-00 adjuster spring provides tension within the brake adjuster mechanism, helping the brake shoes hold their adjustment during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 046-018-00 spring genuine Dexter or aftermarket?\u003c\/strong\u003e Part number 046-018-00 is a genuine Dexter replacement part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The Dexter Adjuster Spring, part number 046-018-00, has UPC 840327619352.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this spring fit a 12 inch x 2 inch trailer brake?\u003c\/strong\u003e Yes, the 046-018-00 adjuster spring fits Dexter 12 inch x 2 inch electric brakes without parking feature, as well as the 10 inch x 2-1\/4 inch size.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257723099,"sku":"DEX-046-018-00","price":0.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_046-018-00_Adjuster_Spring_12x2_EL_10x2-1-4_EL_HYD_Red__68007.1747363801.500.750.jpg?v=1785329081"},{"product_id":"dexter-040-421-00-hydraulic-rear-trailer-brake-shoe-10-in-x-2-1-4-in","title":"Dexter 10 x 2 1\/4 Inch Hydraulic Rear Brake Shoe, Part 040-421-00","description":"\u003cp\u003eThis is the Dexter 10 x 2 1\/4 inch hydraulic rear brake shoe, part number 040-421-00, sized for trailer brake assemblies that use a 10 inch by 2 1\/4 inch hydraulic drum brake. As a rear-position shoe, it is designed to work as part of a hydraulic drum brake assembly on axles built to this size, providing the friction surface that presses against the drum to slow and stop the trailer. Trailer brake shoes are wear items that require periodic replacement as the friction material thins with use, and matching the correct size and hydraulic actuation type is essential for the brake assembly to function correctly and safely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040-421-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 inches x 2 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation Type:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.66 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter 040-421-00 brake shoe?\u003c\/strong\u003e The Dexter 040-421-00 is a 10 inch by 2 1\/4 inch brake shoe, sized for hydraulic drum brake assemblies built to that dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a front or rear brake shoe?\u003c\/strong\u003e Part number 040-421-00 is a rear brake shoe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040-421-00 shoe work with hydraulic or electric brakes?\u003c\/strong\u003e It is a hydraulic brake shoe, designed for hydraulically actuated drum brake assemblies rather than electric brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 040-421-00 brake shoe weigh?\u003c\/strong\u003e This brake shoe weighs 1.66 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 040-421-00?\u003c\/strong\u003e Part number 040-421-00 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this shoe fit a 10 x 2 1\/4 inch front hydraulic brake assembly?\u003c\/strong\u003e No, the 040-421-00 is designated as a rear shoe; a front-position shoe would be a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my trailer brake shoes need replacing?\u003c\/strong\u003e Brake shoes like the Dexter 040-421-00 are wear items, and thinning friction material, reduced stopping power, or visible wear on the shoe surface are signs it is time to replace them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Dexter 040-421-00?\u003c\/strong\u003e This listing is for the 10 x 2 1\/4 inch hydraulic rear brake shoe itself, part number 040-421-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 040-421-00 brake shoe myself?\u003c\/strong\u003e Replacing a trailer brake shoe such as the Dexter 040-421-00 involves disassembling the hydraulic drum brake assembly, and installers should follow the brake manufacturer's service procedure to ensure correct fit and safe operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 040-421-00 shoe genuine Dexter or aftermarket?\u003c\/strong\u003e The 040-421-00 is a genuine Dexter part, identified by its Dexter manufacturer part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257788635,"sku":"DEX-040-421-00","price":46.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_363bf5f5-1e4a-41d4-96dd-e44792fdbf86.jpg?v=1785349559"},{"product_id":"dexter-k23-027-00-electric-trailer-brake-assembly-right-hand-10-x-2-1-4-3-500-lb-self-adjusting-fits-13-15-wheels","title":"Dexter Axle K23-027-00 10 x 2-1\/4 Inch Electric Trailer Brake Assembly, Right Hand, 3500 lb, Fits 13 to 15 Inch Wheels","description":"\u003cp\u003eThe Dexter Axle K23-027-00 is a complete 10 inch x 2-1\/4 inch electric trailer brake assembly rated for 3,500 lb capacity, built for the right hand side of the trailer. It is designed to fit trailers running 13 inch to 15 inch wheels and is manufactured in the USA for dependable, long-term braking performance on light and medium duty trailers.\u003c\/p\u003e\u003cp\u003eThis kit ships as a complete brake assembly rather than a collection of loose parts, so installation is straightforward: it drops in for a full brake replacement without needing to source individual components separately. The brakes are self-adjusting, so there is no need for periodic manual adjustment as the linings wear. The electric magnet is non-polarized, which means either wire lead can be used as ground or power, simplifying wiring at installation. Pre-spliced wires are included to further speed up the hookup process.\u003c\/p\u003e\u003cp\u003eThe kit includes the actuating lever arm, wire clips, retractor springs, shoe and lining kit, magnet kit, adjuster assembly, adjusting screw spring, adjuster slot plugs, wire grommet, anchor post washer, press-in brake mounting bolt, brake mounting nut, and dust cover, along with an instruction sheet. Adjuster slot plugs cover the access holes on the backing plate to help keep dirt, grime, and debris out of the brake shoes and adjuster mechanism, protecting the assembly over time.\u003c\/p\u003e\u003cp\u003eBecause this is a right hand (RH) specific assembly, it must be installed on the right hand side of the trailer only; it is not interchangeable with a left hand assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-027-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Trailer Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 10 inches x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 3,500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Compatibility:\u003c\/strong\u003e 13 inch to 15 inch wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Self-adjusting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Type:\u003c\/strong\u003e Non-polarized, pre-spliced wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.48 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailers using 13 inch to 15 inch wheels with a 3,500 lb electric brake system.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-027-00 brake assembly for the left or right side of the trailer?\u003c\/strong\u003e The Dexter Axle K23-027-00 is a right hand (RH) specific brake assembly and should only be installed on the right side of the trailer, not the left.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes does this brake assembly fit?\u003c\/strong\u003e This assembly is designed to fit trailers running 13 inch to 15 inch wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of the K23-027-00 brake assembly?\u003c\/strong\u003e It is rated for 3,500 lb capacity, making it suited to light and medium duty trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the brake shoes in this kit?\u003c\/strong\u003e The assembly uses 10 inch x 2-1\/4 inch brake shoes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these brakes need manual adjustment?\u003c\/strong\u003e No, the K23-027-00 uses self-adjusting brakes, so they do not require periodic manual adjustment as the linings wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K23-027-00 kit?\u003c\/strong\u003e The kit includes the complete electric brake assembly, actuating lever arm, wire clips, retractor springs, shoe and lining kit, magnet kit, adjuster assembly, adjusting screw spring, adjuster slot plugs, wire grommet, anchor post washer, press-in brake mounting bolt, brake mounting nut, and dust cover, plus an instruction sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the magnet need to be wired a specific way?\u003c\/strong\u003e No, the electric magnet on the K23-027-00 is non-polarized, so either wire can be used as ground or power, and the wires come pre-spliced to simplify hookup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-027-00 brake assembly weigh?\u003c\/strong\u003e The complete assembly weighs 9.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any additional assembly required before installation?\u003c\/strong\u003e No, the K23-027-00 ships as a complete assembly and does not require additional assembly before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the K23-027-00 brake assembly manufactured?\u003c\/strong\u003e It is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the adjuster slot plugs do?\u003c\/strong\u003e The adjuster slot plugs included with the K23-027-00 cover the backing plate access holes to help keep dirt, grime, and debris out of the brake shoes and adjuster mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the K23-027-00 in place of a left hand brake assembly?\u003c\/strong\u003e No, the K23-027-00 is built specifically for the right hand side; a left hand position requires a different part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259820251,"sku":"DEX-K23-027-00","price":115.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_10-inch-2-and-a-quarter-inch--3500lbs-Right-Hand-Electric-Drum-Brake-Assembly__29928.1747363792.500.750.jpg?v=1785188241"},{"product_id":"dexter-10-x-2-1-4-electric-trailer-brake-assembly-left-hand-3-500-lb-fits-13-15-wheels-k23-026-00","title":"Dexter Axle 10 x 2-1\/4 Inch Electric Trailer Brake Assembly, Left Hand, 3500 lbs, Fits 13 to 15 Inch Wheels - K23-026-00","description":"\u003cp\u003eThe Dexter Axle K23-026-00 is a complete 10 inch x 2-1\/4 inch electric brake assembly built for 3,500 lb trailer axles. This is the left hand (LH) unit; the right hand side of the trailer requires a separate, differently numbered part, so confirm you are ordering the correct side before installing. The assembly is rated for trailers running 13 to 15 inch wheels and is designed as a complete, ready-to-mount kit rather than a collection of loose parts.\u003c\/p\u003e\u003cp\u003eThe brakes are self adjusting, so they do not need periodic manual adjustment once installed. The electrical connection uses a non-polarized magnet, which means either wire on the assembly can be used as the ground or the power supply, simplifying wiring at installation. Adjuster slot plugs cover the access holes on the assembly to help keep dirt, grime, and debris out of the electric brake components and shoes over time.\u003c\/p\u003e\u003cp\u003eEach kit includes the complete electric brake assembly, actuating lever arm, wire clips, retractor springs, shoe and lining kit, magnet kit, adjuster assembly, adjusting screw spring, adjuster slot plugs, wire grommet, anchor post washer, press-in brake mounting bolt, brake mounting nut, and dust cover. The assembly is manufactured in the USA and is intended for trailer service.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-026-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 10 inches x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3,500 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Fitment:\u003c\/strong\u003e 13 to 15 inch wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Trailer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002429\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTrailer axles using 13 to 15 inch wheels, 3,500 lb capacity\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the LH designation mean on the K23-026-00?\u003c\/strong\u003e LH stands for left hand, meaning the Dexter Axle K23-026-00 is the left-hand electric brake assembly. The right-hand side of the trailer uses a separate part number, so make sure you are ordering the side that matches the brake you are replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes does this brake assembly fit?\u003c\/strong\u003e The K23-026-00 is designed to fit 13 to 15 inch wheels on a 3,500 lb trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of this brake assembly?\u003c\/strong\u003e This electric brake assembly is rated for 3,500 lbs, matching a 10 inch x 2-1\/4 inch brake configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the K23-026-00 kit?\u003c\/strong\u003e The kit includes the complete electric brake assembly, actuating lever arm, wire clips, retractor springs, shoe and lining kit, magnet kit, adjuster assembly, adjusting screw spring, adjuster slot plugs, wire grommet, anchor post washer, press-in brake mounting bolt, brake mounting nut, and dust cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the brakes self adjusting?\u003c\/strong\u003e Yes, the Dexter Axle K23-026-00 uses self-adjusting brakes, so no periodic manual adjustment is required after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the electrical wiring work on this brake assembly?\u003c\/strong\u003e A non-polarized magnet is used, which means either wire on the K23-026-00 assembly can serve as the ground or the power supply, simplifying the wiring hookup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-026-00 weigh?\u003c\/strong\u003e The complete brake assembly weighs 9.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the brake size on this assembly?\u003c\/strong\u003e The K23-026-00 is a 10 inch x 2-1\/4 inch electric brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a right-hand equivalent to this part?\u003c\/strong\u003e Yes, the K23-026-00 is the left-hand version; the right-hand brake assembly for the opposite side of the trailer carries a different Dexter Axle part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this brake assembly manufactured?\u003c\/strong\u003e The Dexter Axle K23-026-00 electric brake assembly is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of vehicle is this brake assembly designed for?\u003c\/strong\u003e The K23-026-00 is designed for trailer service, specifically as a front electric brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps debris out of the brake assembly?\u003c\/strong\u003e Adjuster slot plugs on the K23-026-00 cover the access holes to help keep dirt, grime, and debris out of the electric brake and shoe assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259853019,"sku":"DEX-K23-026-00","price":115.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_10-inch-2-and-a-quarter-inch--3500lbs-Left-Hand-Electric-Drum-Brake-Assembly__62862.1747363791.500.750.jpg?v=1785188904"},{"product_id":"dexter-12-x-2-electric-trailer-brake-assembly-right-hand-7-000-lb-k23-181-00","title":"Dexter Axle Electric Trailer Brake Assembly K23-181-00, 12 x 2 Inch, Right Hand, 7,000 lb, CSA","description":"\u003cp\u003eThe Dexter Axle K23-181-00 is a complete 12 x 2 inch electric trailer brake assembly built for the right hand (RH) side of a 7,000 lb trailer axle. It is an electromagnetic drum brake unit designed to bolt directly onto the axle flange, giving the trailer's electric brake controller a matched, ready-to-install backing plate and magnet assembly rather than requiring separate sourcing of individual brake components. The assembly carries CSA certification, making it suitable for trailers that require CSA-approved braking hardware.\u003c\/p\u003e\u003cp\u003eBecause this is a right hand unit, it is designed for one specific side of the axle only. The left hand counterpart for the opposite side of the trailer is a separate part, Dexter K23-180-00, so trailer owners replacing brakes on both sides need to order both part numbers, not two of the same one. The kit ships as the main brake component; it is the core electric brake assembly rather than a full hardware bundle with separate mounting fasteners.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-181-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Trailer Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate Size:\u003c\/strong\u003e 12 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CSA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Main component only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for 7,000 lb capacity trailer axles using a 12 x 2 inch electric brake backing plate on the right hand side.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-181-00 a left or right side brake?\u003c\/strong\u003e The Dexter K23-181-00 is a right hand (RH) electric brake assembly, designed to mount on the right side of the trailer axle only. The left hand version for the opposite side is a different part, Dexter K23-180-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size backing plate does this brake use?\u003c\/strong\u003e It uses a 12 x 2 inch backing plate, sized for 7,000 lb capacity trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity is the K23-181-00 rated for?\u003c\/strong\u003e This assembly is rated for 7,000 lb trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake assembly weigh?\u003c\/strong\u003e The Dexter K23-181-00 weighs 13.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake assembly CSA certified?\u003c\/strong\u003e Yes, the K23-181-00 carries CSA certification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K23-181-00 include a parking brake feature?\u003c\/strong\u003e No, the K23-181-00 is a standard electric brake assembly without a parking brake lever. Dexter's electric brake with park lever for a 6,000 lb axle is a separate part number, K23-113-00 for the right side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the K23-181-00?\u003c\/strong\u003e The K23-181-00 ships as the main brake component only, meaning the electric brake backing plate and magnet assembly itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any assembly required before installing the K23-181-00?\u003c\/strong\u003e No, the Dexter K23-181-00 does not require assembly and is ready to mount to the axle flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the K23-181-00 and the hydraulic Uni-servo brake in the same size?\u003c\/strong\u003e The K23-181-00 is an electric brake assembly, while Dexter also offers a 7,000 lb hydraulic Uni-servo right hand brake, part number K23-339-00, for trailers using hydraulic rather than electric brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order the K23-181-00 for both sides of my trailer axle?\u003c\/strong\u003e No, the K23-181-00 is right hand specific. For the left side of a 7,000 lb electric brake axle, order Dexter part K23-180-00 instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-181-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K23-181-00 is a genuine Dexter Axle part number, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260082395,"sku":"DEX-K23-181-00","price":182.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-181-00-12-inch-by-2-inch-7000-Right-Hand-Electric-Drum-Brake-Assembly__70747.1747363793.500.750.jpg?v=1785188330"},{"product_id":"dexter-k23-180-00-left-hand-electric-trailer-brake-assembly-12-x-2-in-7-000-lb-axle-csa","title":"Dexter Axle K23-180-00 Left-Hand Electric Trailer Brake Assembly, 7,000 lb, 12 x 2 Inch, CSA","description":"\u003cp\u003eThe Dexter Axle K23-180-00 is a left-hand (LH) electric trailer brake assembly rated for 7,000 lb axle capacity, built with a 12 x 2 inch brake size and CSA certification. It is designed as a direct fit replacement brake assembly for trailer axles using this brake size and weight rating, delivering the stopping power needed for towing at capacity while integrating with standard electric brake controller systems.\u003c\/p\u003e\u003cp\u003eThis assembly does not include a parking brake mechanism -- it is the standard electric-only configuration. Dexter Axle also offers the equivalent right-hand (RH) version as a separate part number, K23-181-00, so trailer owners replacing brakes on both sides of an axle should order the correct side-specific part for each wheel end.\u003c\/p\u003e\u003cp\u003eConstructed for durability under repeated towing and braking cycles, this brake assembly is intended for trailer applications requiring a 7,000 lb rated, 12 x 2 inch electric drum brake on the left-hand side.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-180-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric Trailer Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 7,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Left-Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking Brake:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CSA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.87 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002665\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles rated for 7,000 lbs using a 12 x 2 inch electric brake, left-hand side.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-180-00 a left-side or right-side brake assembly?\u003c\/strong\u003e The K23-180-00 is the left-hand (LH) electric trailer brake assembly. The right-hand version is a different part number, K23-181-00, so make sure to order the side that matches the wheel end you are replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is this brake assembly rated for?\u003c\/strong\u003e This Dexter Axle electric brake assembly is rated for 7,000 lbs axle capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake size is the K23-180-00?\u003c\/strong\u003e It is a 12 x 2 inch electric drum brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake assembly include a parking brake?\u003c\/strong\u003e No, the K23-180-00 is the standard electric brake configuration without a parking brake mechanism. Dexter Axle offers a separate part with parking brake for the 6,000 lb capacity line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-180-00 weigh?\u003c\/strong\u003e The K23-180-00 brake assembly weighs 13.87 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake assembly CSA certified?\u003c\/strong\u003e Yes, the K23-180-00 electric trailer brake assembly carries CSA certification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter Axle part?\u003c\/strong\u003e Yes, K23-180-00 is a genuine Dexter Axle part number, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on the right-hand side of my trailer axle?\u003c\/strong\u003e No, the K23-180-00 is built specifically for the left-hand side. For the right-hand side, order Dexter Axle part K23-181-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailers is this brake assembly used on?\u003c\/strong\u003e This is a 7,000 lb rated, 12 x 2 inch electric brake assembly intended for trailer axles built to that weight and brake-size specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the K23-180-00?\u003c\/strong\u003e The UPC for the Dexter Axle K23-180-00 electric brake assembly is 876983002665.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260213467,"sku":"DEX-K23-180-00","price":182.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-180-00-12-inch-by-2-inch-7000-Left-Hand-Electric-Drum-Brake-Assembly__63614.1747363793.500.750.jpg?v=1785188670"},{"product_id":"dexter-12-x-2-right-hand-electric-trailer-brake-assembly-with-park-k23-113-00-fits-5-2k-6k-axles","title":"Dexter Axle 12 x 2 Inch Right-Hand Electric Trailer Brake Assembly with Park Brake, 6,000 lb CSA, K23-113-00","description":"\u003cp\u003eThe Dexter Axle K23-113-00 is a complete right-hand electric trailer brake assembly built for 6,000 lb CSA-rated axles. This 12 inch x 2 inch drum brake kit uses a 5-bolt backing plate and includes an integrated park brake feature, making it a direct fit for trailers that require both electric braking and a mechanical parking brake on the right-hand side. The assembly arrives fully built and ready to install, with no additional assembly required, so it drops onto the axle in place of a worn or damaged brake assembly.\u003c\/p\u003e\u003cp\u003eThis kit is designed specifically for Dexter electric brake axles rated at 6,000 lbs and CSA certified, making it suited for trailers that need reliable, consistent stopping power along with a hand-set or foot-set park brake mechanism. Because this is a right-hand assembly, it is not interchangeable with the left-hand side; Dexter offers the left-hand counterpart as a separate part, K23-112-00, for the opposite side of the axle. Ordering the correct side ensures proper cable routing and brake magnet orientation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-113-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Trailer Brake Assembly with Park Brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right-Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 6,000 lbs, CSA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate:\u003c\/strong\u003e 5-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePark Brake:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Trailer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002610\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter 6,000 lb CSA-rated electric brake trailer axles\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e23-113\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K23-113-00 a left or right side brake assembly?\u003c\/strong\u003e The K23-113-00 is the right-hand (RH) brake assembly. The left-hand counterpart for the same axle is a separate part, K23-112-00, so make sure you order the correct side for your trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake does K23-113-00 fit?\u003c\/strong\u003e K23-113-00 is a 12 inch x 2 inch electric brake assembly with a 5-bolt backing plate, designed for 6,000 lb CSA-rated Dexter trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake assembly include a parking brake?\u003c\/strong\u003e Yes, the K23-113-00 right-hand assembly includes an integrated park brake feature in addition to the electric service brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-113-00 brake assembly weigh?\u003c\/strong\u003e The Dexter K23-113-00 right-hand electric brake assembly weighs 14.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K23-113-00 require any assembly before installation?\u003c\/strong\u003e No, K23-113-00 ships as a complete, fully built right-hand brake assembly and does not require additional assembly before it is installed on the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is this brake assembly rated for?\u003c\/strong\u003e K23-113-00 is rated for 6,000 lb CSA axles, matching Dexter's electric brake trailer axle line at that capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-113-00 an electric or hydraulic brake?\u003c\/strong\u003e K23-113-00 is an electric brake assembly, not hydraulic, and is built specifically for electric brake trailer axles with the park brake feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K23-113-00 kit?\u003c\/strong\u003e The kit includes the complete right-hand brake assembly with 5-bolt backing plate, electric brake components, and integrated park brake hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the UPC 876983002610 correspond to?\u003c\/strong\u003e UPC 876983002610 is assigned to the Dexter K23-113-00 right-hand 12 x 2 inch electric brake assembly with park brake, 6,000 lb CSA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for K23-113-00?\u003c\/strong\u003e Yes, the Dexter K23-113-00 assembly corresponds to OEM equivalent part number 23-113.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat vehicle type is the K23-113-00 brake assembly designed for?\u003c\/strong\u003e K23-113-00 is designed for trailer applications, specifically Dexter electric brake trailer axles rated at 6,000 lbs CSA.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260246235,"sku":"DEX-K23-113-00","price":216.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-113-00-12-inch-by-2-inch-6000lbs-Right-Hand-Electric-Drum-Brake-Assembly-with-Parking-Brake__18308.1747363792.500.750.jpg?v=1785188461"},{"product_id":"dexter-12-x-2-left-hand-hydraulic-free-backing-brake-assembly-k23-342-00-fits-5-200-7-000-lb-axles","title":"Dexter Axle K23-342-00 12 x 2 Inch LH Hydraulic Duo-Servo Trailer Brake with Park, 7,000 lb, 5-Bolt","description":"\u003cp\u003eThe Dexter Axle K23-342-00 is a complete left-hand (driver's side) hydraulic duo-servo trailer brake assembly with an integrated parking brake, built for a 7,000 pound axle capacity. This 12 inch x 2 inch brake is designed to mount to a 12 inch hub\/drum using a 5-bolt pattern (mounting bolts not included), making it a direct fit for Dexter axles rated for hydraulic drum brakes in this size and capacity class.\u003c\/p\u003e\u003cp\u003eAs a duo-servo design, the brake shoes self-energize in both forward and reverse braking, and the built-in park brake mechanism allows the assembly to be used with a mechanical parking brake cable setup. It ships as a complete assembly ready to install onto the correct hub\/drum and backing plate location, simplifying replacement of worn or damaged trailer brake hardware.\u003c\/p\u003e\u003cp\u003eThis is a left-hand (driver's side) specific part. The passenger side (right-hand) counterpart is a separate part number, K23-343-00 -- be sure to order the correct side for your axle position.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-342-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Duo-Servo Brake with Parking Brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (Driver's Side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 7,000 pounds (per axle pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 5-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub\/Drum Compatibility:\u003c\/strong\u003e 12 inch hub\/drum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 13 x 13 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002849\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite Side Part Number:\u003c\/strong\u003e K23-343-00 (Right Hand)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-342-00 for the left or right side of the trailer?\u003c\/strong\u003e K23-342-00 is the left-hand (driver's side) brake assembly. The right-hand (passenger side) version is a different part number, K23-343-00, so make sure you order the side that matches your axle position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of this brake?\u003c\/strong\u003e This Dexter Axle hydraulic brake assembly is rated for 7,000 pounds of axle capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub and drum does this brake fit?\u003c\/strong\u003e K23-342-00 is a 12 inch x 2 inch brake designed to work with a 12 inch hub\/drum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake include a parking brake?\u003c\/strong\u003e Yes, the K23-342-00 is a duo-servo brake assembly with an integrated parking brake mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this differ from the Dexter Free-Backing style brake?\u003c\/strong\u003e K23-342-00 is a duo-servo brake design, which self-energizes in both forward and reverse. Dexter's Free-Backing style hydraulic brake at the same 7,000 pound capacity is a separate part number, K23-340-00 (left) and K23-341-00 (right).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bolts does the K23-342-00 use?\u003c\/strong\u003e The brake mounts using a 5-bolt pattern; the mounting bolts themselves are not included with the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-342-00 brake assembly weigh?\u003c\/strong\u003e The Dexter Axle K23-342-00 hydraulic brake assembly weighs 16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the K23-342-00 brake?\u003c\/strong\u003e The K23-342-00 measures 13 x 13 x 3 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete brake assembly or just replacement shoes?\u003c\/strong\u003e K23-342-00 is a complete hydraulic duo-servo brake assembly, not just a shoe kit, and is ready to mount to your hub\/drum and backing plate location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-342-00 genuine Dexter Axle equipment?\u003c\/strong\u003e Yes, K23-342-00 is a genuine Dexter Axle manufacturer part, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer axle does this brake work with?\u003c\/strong\u003e This brake is designed for Dexter trailer axles equipped with hydraulic drum brakes in the 7,000 pound capacity range using 12 inch x 2 inch brakes.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260279003,"sku":"DEX-K23-342-00","price":257.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-342-00-12-inch-by-2-inch-7000-Free-Backing-Left-Hand-Hydraulic-Drum-Brake-Assembly__95496.1747363792.500.750.jpg?v=1785188690"},{"product_id":"dexter-12-x-2-right-hand-hydraulic-free-backing-brake-assembly-mpn-k23-343-00-fits-7k-trailer-axles","title":"Dexter 12 Inch x 2 Inch Right Hand Hydraulic Brake Assembly K23-343-00, 7000 lb Free-Backing, 5-Bolt","description":"\u003cp\u003eThe Dexter K23-343-00 is a complete 12 inch x 2 inch right hand (passenger side) hydraulic drum brake assembly built for Dexter 7,000 lb trailer axles. This is a Free Backing design with a single servo and single plunger coming from the wheel cylinder, which is the most common style used on Dexter hydraulic drum brake axles. The assembly is engineered for a 7,000 lb capacity per axle pair and mounts using a 5-bolt pattern (mounting bolts not included). It is sized to work with 12 inch hubs and drums, making it a direct fit for trailer owners replacing worn or damaged hydraulic brake components on their Dexter 7K axle.\u003c\/p\u003e\u003cp\u003eBecause this is the right hand (passenger side) unit, it should be paired with the corresponding left hand assembly (a separate part number) for a complete axle brake set. As a complete assembly, the K23-343-00 simplifies replacement by supplying the full hydraulic brake mechanism rather than individual components, reducing the need to source and match separate parts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-343-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Drum Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Position:\u003c\/strong\u003e Right Hand (Passenger Side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 7,000 pounds per axle pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Design:\u003c\/strong\u003e Free Backing, single servo, single plunger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 5-bolt (mounting bolts not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub\/Drum Compatibility:\u003c\/strong\u003e 12 inch hub\/drum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 13 x 13 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002856\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter 7,000 lb hydraulic drum brake axles using 12 inch x 2 inch Free Backing right hand brakes\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers available\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich side does the K23-343-00 fit?\u003c\/strong\u003e The K23-343-00 is the right hand (passenger side) brake assembly. The matching left hand assembly for the other side of the axle carries a different Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is this?\u003c\/strong\u003e This is a 12 inch x 2 inch hydraulic drum brake assembly, sized to work with 12 inch hubs and drums.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is this brake rated for?\u003c\/strong\u003e The K23-343-00 is built for a 7,000 pound capacity per axle pair, matching Dexter's 7K hydraulic drum brake axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete brake assembly or just individual parts?\u003c\/strong\u003e The K23-343-00 is a complete hydraulic brake assembly, not individual components, which simplifies replacement on a Dexter 7,000 lb axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of servo design does the K23-343-00 use?\u003c\/strong\u003e It uses a Free Backing design with a single servo and a single plunger coming from the wheel cylinder, the most common style on Dexter hydraulic drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the brake mount to the axle?\u003c\/strong\u003e The K23-343-00 uses a 5-bolt mounting pattern; mounting bolts are not included with the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-343-00 weigh?\u003c\/strong\u003e This Dexter brake assembly weighs 16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the packaged assembly?\u003c\/strong\u003e The K23-343-00 has product dimensions of 13 x 13 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy a left hand assembly separately?\u003c\/strong\u003e Yes, since the K23-343-00 is the right hand (passenger side) unit only, the left hand side of the axle requires a separate Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit a 12 inch hub and drum setup?\u003c\/strong\u003e Yes, the K23-343-00 is designed for use with 12 inch hubs and drums on Dexter 7,000 lb hydraulic brake axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is this brake assembly?\u003c\/strong\u003e This is a genuine Dexter brake assembly, part number K23-343-00.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260311771,"sku":"DEX-K23-343-00","price":257.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-343-00-12-inch-by-2-inch-7000-Free-Backing-Right-Hand-Hydraulic-Drum-Brake-Assembly__93568.1747363792.500.750.jpg?v=1785188017"},{"product_id":"dexter-k23-106-00-12-x-2-right-hand-electric-trailer-brake-assembly-6-000-lb-axle-csa","title":"Dexter 12 Inch x 2 Inch Electric Brake Assembly, Right Hand, 6,000 lbs Axle, K23-106-00","description":"\u003cp\u003eThe Dexter K23-106-00 is a complete 12 inch x 2 inch electric drum brake assembly built for the right-hand side of 6,000 lb. Trailer axles. It is designed as a full replacement unit, arriving pre-assembled with mounting hardware so it can be installed directly onto the axle flange without sourcing separate parts. This assembly is part of Dexter's CSA-rated 6,000 lb. Electric brake line, which pairs a left-hand (K23-105-00) and right-hand (K23-106-00) unit per axle end -- this listing is the right-hand assembly only.\u003c\/p\u003e\u003cp\u003eThe brake uses an electric actuation system with white magnet wires, engaging the magnet against the armature to apply the shoes to the 12 inch x 2 inch drum surface. It mounts using a 5-bolt pattern, with the mounting hardware included in the box. Because the assembly ships complete, it is intended to speed up axle brake service and reduce the number of individual components a buyer has to match and order separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-106-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 6,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e CSA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 5-Bolt Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Wire Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.83 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 6,000 lb. Capacity trailer axles equipped for electric brakes, right-hand side. A matching left-hand assembly (K23-105-00) is required for the opposite side of the axle.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-106-00 a left-hand or right-hand brake assembly?\u003c\/strong\u003e K23-106-00 is the right-hand electric brake assembly. The matching left-hand unit for the same axle is a separate part, K23-105-00, so be sure to order the correct side for each end of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake assembly rated for?\u003c\/strong\u003e This Dexter electric brake assembly is built for 6,000 lb. Capacity trailer axles and carries CSA compliance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum does the K23-106-00 fit?\u003c\/strong\u003e It is a 12 inch x 2 inch electric drum brake assembly, matching the standard drum size used on 6,000 lb. Dexter axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake assembly come with mounting hardware?\u003c\/strong\u003e Yes, the K23-106-00 right-hand assembly ships with the mounting hardware needed to install it, using a 5-bolt mounting pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete brake assembly or just the shoes?\u003c\/strong\u003e K23-106-00 is a complete electric brake assembly, not just replacement shoes -- it includes the full brake mechanism ready to bolt onto the axle flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake actuation does this unit use?\u003c\/strong\u003e This is an electric brake assembly, using magnet-actuated shoes with white magnet wires rather than hydraulic or surge actuation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-106-00 weigh?\u003c\/strong\u003e The Dexter K23-106-00 right-hand brake assembly weighs 13.83 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on a non-Dexter axle?\u003c\/strong\u003e K23-106-00 is designed for 6,000 lb. Capacity axles equipped for electric brakes; confirm your axle's brake mounting pattern and drum size match before installing on a non-Dexter axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K23-106-00 include a parking brake feature?\u003c\/strong\u003e No, K23-106-00 is the standard electric version without park brake. Dexter also offers K23-112-00\/K23-113-00 as the LH\/RH electric assemblies with park brake for 6,000 lb. Axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between K23-106-00 and K23-180-00?\u003c\/strong\u003e K23-106-00 is the right-hand electric brake assembly for 6,000 lb. Axles, while K23-180-00\/K23-181-00 are the LH\/RH electric assemblies built for 7,000 lb. Axles -- match the part to your axle's rated capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CSA compliance included with this brake assembly?\u003c\/strong\u003e Yes, the K23-106-00 is part of Dexter's CSA-rated electric brake lineup for 6,000 lb. Axles.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260377307,"sku":"DEX-K23-106-00","price":156.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-106-00-12-inch-by-2-inch-6000lbs-Right-Hand-Electric-Drum-Brake-Assembly__52388.1747363791.500.750.jpg?v=1785189023"},{"product_id":"dexter-k23-112-00-left-hand-12-x-2-electric-trailer-brake-assembly-with-park-brake-6-000-lb-csa-fits-5-2k-6k-axles","title":"Dexter Axle K23-112-00 Left-Hand 12 x 2 Electric Brake Assembly with Park Brake, 6,000 lb CSA","description":"\u003cp\u003eThe Dexter Axle K23-112-00 is a complete left-hand electric trailer brake assembly built for 6,000 lb CSA-rated axles, with an integrated park brake feature for trailers that require parking or emergency brake capability on the towed unit. This is a full brake assembly, not just a shoe kit, so it installs directly onto the left-hand (driver's side) hub in place of a worn or damaged unit. The assembly uses a 12 inch x 2 inch drum brake configuration with a 5-bolt backing plate, matching the common Dexter 5,200 lb and 6,000 lb electric brake axle platform.\u003c\/p\u003e\u003cp\u003eBecause electric trailer brakes rely on a magnet-actuated system rather than hydraulic pressure, this assembly is wired for a standard electric brake controller setup and is designed as a direct fit replacement on compatible Dexter axles, restoring full braking and parking function without needing to fabricate or modify mounting hardware. The park brake mechanism is built into this LH assembly, so no separate park brake kit is needed on this side.\u003c\/p\u003e\u003cp\u003eThis is the left-hand (LH) unit only. The corresponding right-hand assembly for the opposite side of the trailer is Dexter part number K23-113-00, a separate SKU with its own part number -- order the correct side for each hub position.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-112-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left-Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 6,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CSA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePark Brake:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate:\u003c\/strong\u003e 5-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002603\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 23-112\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits Dexter 5,200 lb and 6,000 lb axles equipped with electric brakes\u003c\/li\u003e\n\u003cli\u003eLeft-hand side only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e23-112\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat side does the K23-112-00 fit?\u003c\/strong\u003e The Dexter Axle K23-112-00 is a left-hand (LH) brake assembly only. For the right-hand side of the trailer, order Dexter part number K23-113-00 instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake assembly include the park brake feature?\u003c\/strong\u003e Yes, the K23-112-00 has the park brake mechanism built into the left-hand assembly, so no separate park brake kit is required for this side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake rated for?\u003c\/strong\u003e The K23-112-00 is rated for 6,000 lb CSA axles and is also compatible with Dexter 5,200 lb electric brake axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an electric or hydraulic brake assembly?\u003c\/strong\u003e The K23-112-00 is an electric brake assembly, actuated by a magnet and wired to a trailer brake controller rather than hydraulic fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is used?\u003c\/strong\u003e This assembly uses a 12 inch x 2 inch drum brake with a 5-bolt backing plate pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-112-00 a complete brake assembly or just parts?\u003c\/strong\u003e It is a complete left-hand brake assembly, including the backing plate, magnet, shoes, and park brake mechanism, ready to mount onto a compatible hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-112-00 weigh?\u003c\/strong\u003e The Dexter Axle K23-112-00 brake assembly weighs 14.06 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the K23-112-00?\u003c\/strong\u003e Yes, the OEM equivalent part number for the K23-112-00 is 23-112.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the K23-112-00 fit a right-hand axle position?\u003c\/strong\u003e No. This is a left-hand-only assembly; installing it on the right-hand side is not correct. Use K23-113-00 for the right-hand side instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake assembly?\u003c\/strong\u003e The UPC for the Dexter Axle K23-112-00 is 876983002603.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260442843,"sku":"DEX-K23-112-00","price":216.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-112-00-12-inch-by-2-inch-6000lbs-Left-Hand-Electric-Drum-Brake-Assembly-with-Parking-Brake__05081.1747363791.500.750.jpg?v=1785188067"},{"product_id":"dexter-k23-105-00-left-hand-12-x-2-electric-trailer-brake-assembly-6-000-lb-csa-fits-5-200-6-000-lb-axles","title":"Dexter 12 x 2 Inch Left Hand Electric Drum Brake Assembly K23-105-00, 6,000 lbs. CSA Approved","description":"\u003cp\u003eThe Dexter K23-105-00 is a complete 12 inch x 2 inch electric drum brake assembly built for the left hand (LH) side of a trailer axle rated to 6,000 lbs. Per pair. It arrives boxed as a complete backing plate kit, so the electric brake magnet, shoes, and backing plate are pre-assembled and ready to bolt on, along with the mounting hardware needed for installation. Because it is an electric brake, it works with a standard electric brake controller and wiring to apply stopping power proportional to trailer load, making it a common choice for boat trailers, utility trailers, and other 6,000 lb.-capacity axle applications.\u003c\/p\u003e\u003cp\u003eThis assembly is CSA Approved, meaning it has been certified to the Canadian Standards Association requirements for trailer brake components. It is designated specifically as the left hand (LH) unit; the mirror-image right hand (RH) unit is a separate part, K23-106-00, so be sure to order the correct side for your axle position. Genuine Dexter construction and a 5 year limited warranty back the assembly for durability in trailer service.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-105-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric Drum Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6,000 lbs. Per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CSA Approved\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Backing plate kit with mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.82 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 14.2 x 14.4 x 3.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-105-00 for the left or right side of the trailer?\u003c\/strong\u003e K23-105-00 is the left hand (LH) electric drum brake assembly. The mirror-image right hand (RH) version is a separate part number, K23-106-00, so confirm which side you need before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight rating of this brake assembly?\u003c\/strong\u003e The Dexter K23-105-00 is rated for 6,000 lbs. Per pair, meaning this LH unit is designed to work together with its RH counterpart to support a 6,000 lb. Axle capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the K23-105-00 brake?\u003c\/strong\u003e It is a 12 inch x 2 inch electric drum brake assembly, sized for trailer axles in the 6,000 lb. Capacity class.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K23-105-00 come fully assembled?\u003c\/strong\u003e Yes, K23-105-00 ships as a complete boxed backing plate kit with the electric brake components pre-assembled on the backing plate, plus the mounting hardware needed to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake CSA approved?\u003c\/strong\u003e Yes, the Dexter K23-105-00 electric drum brake assembly is CSA Approved, certified to Canadian Standards Association requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake control does the K23-105-00 use?\u003c\/strong\u003e K23-105-00 is an electric drum brake assembly, designed to be operated with a standard electric trailer brake controller and wiring rather than hydraulic actuation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-105-00 weigh?\u003c\/strong\u003e The Dexter K23-105-00 left hand electric drum brake assembly weighs 13.82 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the K23-105-00 assembly?\u003c\/strong\u003e The K23-105-00 measures 14.2 x 14.4 x 3.3 inches as boxed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-105-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K23-105-00 is a genuine Dexter electric drum brake assembly, backed by a 5 year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting hardware is included with K23-105-00?\u003c\/strong\u003e The K23-105-00 backing plate kit includes the mounting hardware needed to install the assembly onto a compatible 6,000 lb.-capacity trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the right hand brake separately?\u003c\/strong\u003e Yes, the right hand (RH) electric brake assembly is sold separately as Dexter part number K23-106-00; K23-105-00 is the left hand (LH) unit only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with K23-105-00?\u003c\/strong\u003e K23-105-00 is boxed as a complete backing plate kit, including the electric brake assembly and mounting hardware, ready to install on the left hand side of the trailer axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260475611,"sku":"DEX-K23-105-00","price":156.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-105-00-12-inch-by-2-inch-6000lbs-Left-Hand-Electric-Drum-Brake-Assembly__06582.1747363792.500.750.jpg?v=1785189023"},{"product_id":"dexter-k23-398-00-hydraulic-uni-servo-brake-kit-7-x-1-3-4-in-left-hand-2-200-lb-trailer-axle","title":"Dexter Axle K23-398-00 Left Hand 7 x 1-3\/4 Inch Hydraulic Uni-Servo Trailer Brake","description":"\u003cp\u003eThe Dexter Axle K23-398-00 is a left hand (LH) 7 inch x 1-3\/4 inch hydraulic uni-servo trailer brake, built for light duty trailer axles. It is a hydraulically actuated uni-servo brake assembly designed to mount on the left side of the trailer axle only -- the matching right hand assembly is sold under a separate part number, K23-399-00, so trailer owners replacing both sides need to order both part numbers rather than two of the same one. The uni-servo design uses a single hydraulic wheel cylinder to actuate both brake shoes, a common configuration on boat and utility trailer axles that keep the axle within the 600 to 8,000 lbs axle capacity range covered by Dexter's light duty brake line.\u003c\/p\u003e\u003cp\u003eThis assembly is intended as a direct replacement for a worn or damaged left hand 7 inch x 1-3\/4 inch hydraulic uni-servo brake on a compatible trailer axle. Note that the axle spindle itself is not sold separately as part of this kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-398-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Uni-Servo Trailer Brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Diameter:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShoe Width:\u003c\/strong\u003e 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Actuation:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002405\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpposite Side Part Number:\u003c\/strong\u003e K23-399-00 (Right Hand, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for light duty trailer axles within the 600 to 8,000 lbs axle capacity range that use a 7 inch x 1-3\/4 inch hydraulic uni-servo brake on the left hand side. This is a left hand (LH) specific assembly; it does not fit the right hand side of the axle.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference or superseded part numbers are published for K23-398-00.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-398-00 a left or right side brake?\u003c\/strong\u003e The Dexter Axle K23-398-00 is a left hand (LH) brake assembly. It is not interchangeable with the right hand side; the right hand version is a separate part, K23-399-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum does this brake fit?\u003c\/strong\u003e K23-398-00 is sized for a 7 inch x 1-3\/4 inch hydraulic uni-servo drum brake configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake hydraulic or electric?\u003c\/strong\u003e K23-398-00 is a hydraulic uni-servo brake, actuated by hydraulic pressure rather than an electric brake magnet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-398-00 brake weigh?\u003c\/strong\u003e This Dexter Axle K23-398-00 brake assembly weighs 11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trailer axle capacity is this brake designed for?\u003c\/strong\u003e K23-398-00 is part of Dexter's light duty trailer brake line, which covers axles in the 600 to 8,000 lbs axle capacity range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy both K23-398-00 and K23-399-00?\u003c\/strong\u003e For a complete two-sided brake replacement, yes -- K23-398-00 is the left hand brake and K23-399-00 is the corresponding right hand brake; they are sold as separate part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the axle spindle included with this brake kit?\u003c\/strong\u003e No, the spindle is not available for resale and is not included with the K23-398-00 brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter Axle K23-398-00?\u003c\/strong\u003e The UPC for the Dexter Axle K23-398-00 hydraulic brake is 876983002405.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a uni-servo brake?\u003c\/strong\u003e A uni-servo brake, as used in the K23-398-00, is a drum brake design that uses a single hydraulic wheel cylinder to actuate both brake shoes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-398-00 a genuine Dexter Axle part?\u003c\/strong\u003e Yes, K23-398-00 is a genuine Dexter Axle manufacturer part number, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260508379,"sku":"DEX-K23-398-00","price":126.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-398-00-7-inches-by-1-and-three-quarters-of-an-inch-2500lbs-Uni-Servo-Left-Hand-Hydraulic-Drum-Brake-Assembly__96798.1747363794.500.750.jpg?v=1785189023"},{"product_id":"dexter-k23-399-00-hydraulic-brake-kit-7-x-1-3-4-in-right-hand-uni-servo-2-200-lb-trailer-axle","title":"Dexter Axle K23-399-00 Right-Hand 7 x 1-3\/4 Inch Hydraulic Uni-Servo Trailer Brake Kit, 2,200 lbs","description":"\u003cp\u003eThe Dexter Axle K23-399-00 is a right-hand (RH) 7 inch x 1-3\/4 inch hydraulic uni-servo brake kit built for trailer axle positions rated to 2,200 lbs. This is a hydraulic-actuated drum brake assembly, using the uni-servo design that applies braking force through a single hydraulic wheel cylinder acting on both the primary and secondary brake shoes for consistent stopping performance.\u003c\/p\u003e\u003cp\u003eK23-399-00 is the right-hand version of this brake kit and mounts at the rear brake position on the trailer axle. It carries a machined exterior finish and weighs 11 pounds as packaged. Because this kit is side-specific, buyers should confirm they are ordering the correct side for their axle - the left-hand counterpart to this kit is a separate part number, K23-398-00, and the two are not interchangeable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-399-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Uni-Servo Brake Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 7 inches x 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Capacity:\u003c\/strong\u003e 2,200 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 5 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002412\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRight-hand (RH) rear position on trailer axles sized for a 7 inch x 1-3\/4 inch hydraulic uni-servo brake\u003c\/li\u003e\n\u003cli\u003eLeft-hand (LH) axle position requires the separate K23-398-00 brake kit, not this part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Axle K23-399-00 brake kit?\u003c\/strong\u003e K23-399-00 is a right-hand (RH) 7 inch x 1-3\/4 inch hydraulic uni-servo trailer brake kit rated for 2,200 lbs, designed to mount at the rear brake position on a trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake kit hydraulic or electric?\u003c\/strong\u003e K23-399-00 is a hydraulic uni-servo brake kit, meaning it is actuated by hydraulic pressure through a wheel cylinder rather than an electric brake magnet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes K23-399-00 fit the left or right side of the trailer?\u003c\/strong\u003e K23-399-00 is the right-hand (RH) version only. The left-hand (LH) side uses a different Dexter Axle part number, K23-398-00, so buyers need to order the correct side for each wheel position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use K23-399-00 on the left-hand side of my trailer?\u003c\/strong\u003e No. K23-399-00 is built specifically as a right-hand brake assembly and is not interchangeable with the left-hand side, which requires the separate Dexter Axle K23-398-00 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake does this kit use?\u003c\/strong\u003e This Dexter Axle hydraulic brake kit uses a 7 inch x 1-3\/4 inch brake, matching axles built for that hydraulic uni-servo brake size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the K23-399-00 brake handle?\u003c\/strong\u003e The K23-399-00 hydraulic uni-servo brake kit is rated for 2,200 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-399-00 brake kit weigh?\u003c\/strong\u003e The K23-399-00 brake kit weighs 11 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the exterior finish on this brake kit?\u003c\/strong\u003e The K23-399-00 kit has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-399-00 a genuine Dexter Axle part?\u003c\/strong\u003e Yes, K23-399-00 is the public Dexter Axle manufacturer part number for this right-hand hydraulic uni-servo brake kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat position on the trailer does this brake kit install at?\u003c\/strong\u003e K23-399-00 is designated for the rear brake position on the trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the K23-399-00 kit?\u003c\/strong\u003e The K23-399-00 brake kit ships in packaging measuring 5 x 5 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake mechanism does K23-399-00 use?\u003c\/strong\u003e K23-399-00 uses a uni-servo brake mechanism, where a single hydraulic wheel cylinder actuates both the primary and secondary brake shoes.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260672219,"sku":"DEX-K23-399-00","price":126.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-399-00-7-inches-by-1-and-three-quarters-of-an-inch-2500lbs-Uni-Servo-Right-Hand-Hydraulic-Drum-Brake-Assembly__14437.1747363794.500.750.jpg?v=1785188729"},{"product_id":"dexter-k23-458-00-electric-trailer-brake-assembly-12-x-2-nev-r-adjust-csa-left-hand-6-000-lb-axle","title":"Dexter 12 x 2 Inch Electric Brake Assembly, Left Hand, K23-458-00, 6000 lb CSA Nev-R-Adjust","description":"\u003cp\u003eThe Dexter K23-458-00 is a 12 inch x 2 inch electric trailer brake assembly built for the left hand (LH) side of the axle. It uses Dexter's Nev-R-Adjust self-adjusting mechanism, which automatically compensates for lining wear so the brake maintains consistent stopping performance without manual adjustment. The assembly is CSA certified for use on trailer axles rated in the 5,500 to 7,000 lb capacity range, and is designed for a nominal 6,000 lb capacity position on the axle.\u003c\/p\u003e\u003cp\u003eBecause this is a side-specific component, the K23-458-00 fits the left hand position only. The right hand counterpart is a separate part number, K23-459-00, so be sure to order the correct side for your axle. Axles in this capacity range are available with 8 on 6.5 inch hub bolt patterns. This brake assembly weighs 11 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-458-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric, self-adjusting (Nev-R-Adjust)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CSA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 5,500 to 7,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Position Capacity:\u003c\/strong\u003e 6,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Bolt Pattern Availability:\u003c\/strong\u003e 8 on 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983004409\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailer axles rated 5,500 to 7,000 lbs, left hand side\u003c\/li\u003e\n\u003cli\u003eCompatible with axles using 8 on 6.5 inch hub bolt patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich side does the K23-458-00 fit?\u003c\/strong\u003e The Dexter K23-458-00 is a left hand (LH) brake assembly only. If you need the right hand side, order K23-459-00 instead, which is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this brake?\u003c\/strong\u003e This Dexter electric brake assembly measures 12 inches by 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-458-00 self-adjusting?\u003c\/strong\u003e Yes, the K23-458-00 uses Dexter's Nev-R-Adjust self-adjusting mechanism, which automatically compensates for lining wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake designed for?\u003c\/strong\u003e The K23-458-00 is intended for trailer axles in the 5,500 to 7,000 lb capacity range, with a rated position capacity of 6,000 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake certified?\u003c\/strong\u003e The Dexter K23-458-00 carries CSA certification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-458-00 weigh?\u003c\/strong\u003e This brake assembly weighs 11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub bolt pattern works with this brake?\u003c\/strong\u003e Axles in this capacity range that use the K23-458-00 are available with an 8 on 6.5 inch hub bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an electric or hydraulic brake?\u003c\/strong\u003e The K23-458-00 is an electric brake assembly, not hydraulic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the K23-458-00 on the right side of my trailer axle?\u003c\/strong\u003e No. The K23-458-00 is built specifically for the left hand position; the right hand equivalent is Dexter part K23-459-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K23-458-00?\u003c\/strong\u003e The Dexter K23-458-00 electric brake assembly has UPC 876983004409.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260836059,"sku":"DEX-K23-458-00","price":163.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/all_part__24732.1747363841.500.750.jpg?v=1785329079"},{"product_id":"12-x-2-electric-trailer-brake-assembly-k23-464-00-left-hand-7-000-lb-axle-nev-r-adjust-self-adjusting","title":"Dexter 12 x 2 Electric Brake Assembly, 7K, Left Hand (LH), Nev-R-Adjust - K23-464-00","description":"\u003cp\u003eThe Dexter K23-464-00 is a complete 12 inch x 2 inch electric brake assembly rated for 7,000 lb (7K) axles. This is a left-hand (LH) specific assembly, built around Dexter's Nev-R-Adjust self-adjusting brake mechanism, which maintains proper shoe-to-drum clearance automatically so the brake does not require periodic manual adjustment as linings wear. The assembly ships as a complete unit rather than individual loose components, making it a straightforward replacement when a trailer's left-side electric brake needs to be swapped out in full rather than repaired piecemeal.\u003c\/p\u003e\u003cp\u003eBecause this is a left-hand assembly, it is not interchangeable with a right-hand brake; the two sides are separate part numbers, so confirm which side of the trailer needs service before ordering. The kit includes hardware and components sized for the 12 x 2 inch, 7K electric brake platform, and the complete assembly weighs 14.1 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-464-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 7,000 pounds (7K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Nev-R-Adjust (self-adjusting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983004447\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 12 x 2 inch, 7,000 lb (7K) electric brake trailer axle applications, left-hand side only.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-464-00 for the left or right side of the trailer?\u003c\/strong\u003e The K23-464-00 is a left-hand (LH) specific brake assembly. It is not designed to fit the right side, and the right-hand version is a separate part number, so confirm which side needs service before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake does this assembly use?\u003c\/strong\u003e This Dexter brake assembly is a 12 inch x 2 inch electric brake, built for 7,000 lb (7K) rated axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Nev-R-Adjust mean on this brake?\u003c\/strong\u003e Nev-R-Adjust is Dexter's self-adjusting brake mechanism, which automatically maintains proper shoe-to-drum clearance as the linings wear, included on the K23-464-00 assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-464-00 brake assembly weigh?\u003c\/strong\u003e The complete K23-464-00 assembly weighs 14.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete brake assembly or just individual parts?\u003c\/strong\u003e K23-464-00 is a complete 12 x 2 inch, 7K electric brake assembly, not a single component, so it includes the hardware and brake unit needed for a full left-hand brake replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle weight rating is this brake designed for?\u003c\/strong\u003e This assembly is rated for 7,000 lb (7K) axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use K23-464-00 on both sides of my trailer?\u003c\/strong\u003e No. K23-464-00 is left-hand (LH) specific, and the opposite side requires a different Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the K23-464-00 brake assembly?\u003c\/strong\u003e K23-464-00 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake assembly?\u003c\/strong\u003e The UPC for the Dexter K23-464-00 left-hand brake assembly is 876983004447.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K23-464-00 kit include mounting hardware?\u003c\/strong\u003e Yes, the K23-464-00 assembly includes hex nuts along with the 12 x 2 inch, 7K electric brake components needed for the left-hand assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260868827,"sku":"DEX-K23-464-00","price":190.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/all_part_copy__30308.1747363839.500.750.jpg?v=1785329079"},{"product_id":"dexter-k23-468-00-left-hand-10-x-2-1-4-electric-trailer-brake-assembly-3-500-lb-3-5k-nev-r-adjust","title":"Dexter 10 x 2-1\/4 Inch Left Hand Electric Trailer Brake Assembly, 3.5K, Nev-R-Adjust, K23-468-00","description":"\u003cp\u003eThe Dexter K23-468-00 is a complete 10 inch x 2-1\/4 inch electric trailer brake assembly built for 3.5K axle applications. This is the Left Hand (LH) brake kit -- a distinct part number from the Right Hand version, so confirm you are ordering the correct side for your axle before installation. The unit is a full assembly rather than a single component, ready to mount as a complete electric brake.\u003c\/p\u003e\u003cp\u003eThis brake incorporates Dexter's Nev-R-Adjust design, a self-adjusting mechanism that maintains proper shoe-to-drum clearance automatically as the brake shoes wear, reducing the need for manual adjustment over the life of the brake. The kit includes hardware such as hex nuts as part of the assembly. It is intended for trailer drum brake systems rated for 3.5K axles.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-468-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 10 x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Rating:\u003c\/strong\u003e 3.5K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Nev-R-Adjust (self-adjusting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric Trailer Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983004607\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.64 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-468-00 a left or right side brake?\u003c\/strong\u003e K23-468-00 is the Left Hand (LH) electric brake assembly. The Right Hand version is a separate Dexter part number, so make sure you are ordering the correct side for your trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake is this?\u003c\/strong\u003e This Dexter brake assembly is a 10 x 2-1\/4 inch electric brake rated for 3.5K axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake self-adjust?\u003c\/strong\u003e Yes. The K23-468-00 uses Dexter's Nev-R-Adjust system, which automatically maintains proper shoe-to-drum clearance as the brake shoes wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete brake assembly or a single part?\u003c\/strong\u003e K23-468-00 is a complete 10 x 2-1\/4 inch electric brake assembly, not an individual replacement component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle rating is this brake designed for?\u003c\/strong\u003e The Dexter K23-468-00 is designed for 3.5K rated trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake assembly weigh?\u003c\/strong\u003e The K23-468-00 Left Hand electric brake assembly weighs 9.64 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of brake system is this for?\u003c\/strong\u003e This assembly is used in trailer drum brake systems, specifically as a 10 x 2-1\/4 inch electric brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include mounting hardware?\u003c\/strong\u003e Yes, the K23-468-00 assembly includes hex nut hardware as part of the complete kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the Left Hand brake on the right side of my trailer?\u003c\/strong\u003e No. K23-468-00 is specifically the Left Hand (LH) brake assembly and should only be installed on the left side; the Right Hand side requires its own distinct Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the K23-468-00 brake assembly?\u003c\/strong\u003e K23-468-00 is manufactured by Dexter.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260934363,"sku":"DEX-K23-468-00","price":126.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-468-00-10-inch-by-2--and-a-quarter-inch-3500lbs-Nev-R-Adjust-Left-Hand-Electric-Drum-Brake-Assembly__85197.1747363793.500.750.jpg?v=1785329079"},{"product_id":"dexter-k23-465-00-brake-kit-12-x-2-7k-electric-right-hand-assembly-nev-r-adjust","title":"Dexter 12 Inch x 2 Inch 7K Electric Brake Kit, Right Hand, Nev-R-Adjust, K23-465-00","description":"\u003cp\u003eThe Dexter K23-465-00 is a complete 12 inch x 2 inch electric brake assembly rated for 7000 lb (7K) axle capacity, built for the right hand (RH) side of the trailer only. It uses Dexter's Nev-R-Adjust self-adjusting mechanism, which automatically compensates for shoe wear so brake clearance stays correct without periodic manual adjustment. This reduces maintenance time and helps keep braking performance consistent between service intervals.\u003c\/p\u003e\u003cp\u003eThe kit ships as a full assembly rather than a bare backing plate, so it includes the hardware needed to complete the installation: five hex nuts, two plugs, and an instruction sheet to guide the swap. Because the electric brake magnet and internal components are designed around the 7000 lb capacity rating, this kit is intended for axles matched to that load rating rather than lighter-duty applications.\u003c\/p\u003e\u003cp\u003eThis is the right hand (RH) specific brake assembly. It is not interchangeable side-to-side; the left hand brake for the opposite side of the axle is a separate part number. Confirm which side of the trailer needs service before ordering so the correct RH unit is installed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-465-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity Rating:\u003c\/strong\u003e 7000 lbs (7K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Nev-R-Adjust self-adjusting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Brake assembly, hex nuts (qty 5), plugs (qty 2), instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 12 inch x 2 inch electric brake axle positions rated for 7000 lb (7K) capacity, right hand (RH) side only.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size axle does the Dexter K23-465-00 fit?\u003c\/strong\u003e The K23-465-00 is a 12 inch x 2 inch electric brake assembly built for axle positions rated at 7000 lbs (7K) capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake kit for the left or right side of the trailer?\u003c\/strong\u003e K23-465-00 is the right hand (RH) brake assembly only; it is not interchangeable with the left hand side, which uses a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake self-adjust as the shoes wear?\u003c\/strong\u003e Yes, the K23-465-00 uses Dexter's Nev-R-Adjust mechanism, which automatically takes up slack as the brake shoes wear so manual adjustment is not required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K23-465-00 kit?\u003c\/strong\u003e The kit includes the complete 12 inch x 2 inch electric brake assembly along with five hex nuts, two plugs, and an instruction sheet for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-465-00 brake assembly weigh?\u003c\/strong\u003e This Dexter electric brake kit weighs 14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K23-465-00 be used on a 6000 lb rated axle?\u003c\/strong\u003e No, K23-465-00 is built for the 7000 lb (7K) capacity rating; use a brake kit matched to your axle's specific rated capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-465-00 a complete brake assembly or just a backing plate?\u003c\/strong\u003e It is a complete 12 inch x 2 inch electric brake assembly, not a bare backing plate, and comes with the mounting hardware and instructions listed in the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Nev-R-Adjust mean on this Dexter brake?\u003c\/strong\u003e Nev-R-Adjust is Dexter's self-adjusting brake system used on the K23-465-00, designed to automatically maintain proper shoe-to-drum clearance as the brake wears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a separate part for the left hand side of the axle?\u003c\/strong\u003e Yes, K23-465-00 is the right hand (RH) unit only; the left hand side of the trailer requires a different Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre instructions included with the K23-465-00?\u003c\/strong\u003e Yes, an instruction sheet is included in the K23-465-00 kit along with the brake assembly and mounting hardware.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991261032667,"sku":"DEX-K23-465-00","price":188.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-12x2-right-hand-electric-drum-brake-assembly-7000lbs-nev-r-adjust__75764.1747363839.500.750.jpg?v=1785188532"},{"product_id":"dexter-k23-469-00-electric-brake-assembly-10-x-2-1-4-right-hand-fits-3-500-lb-3-5k-trailer-axles","title":"Dexter K23-469-00 10 x 2-1\/4 Inch Electric Trailer Brake Kit, Right-Hand, 3.5K Axle","description":"\u003cp\u003eThe Dexter K23-469-00 is a complete 10 inch x 2-1\/4 inch electric trailer brake assembly built for 3.5K (3,500 lb) axles, and it is the right-hand (passenger side) version. It uses Dexter's Nev-R-Adjust self-adjusting design, so the shoes automatically compensate for lining wear and maintain proper shoe-to-drum clearance without periodic manual adjustment, keeping braking performance consistent over the life of the linings. The kit mounts with a 4-bolt pattern, matching the standard bolt circle used on Dexter 3.5K electric brake axles.\u003c\/p\u003e\u003cp\u003eBecause this is a side-specific part, it is engineered and drilled for right-hand (passenger side) installation only; it is not interchangeable with a left-hand\/driver side assembly, which carries its own distinct Dexter part number. Ordering the correct side matters for proper electromagnet orientation and shoe actuation on the trailer.\u003c\/p\u003e\u003cp\u003eThe kit ships as a complete brake assembly along with the mounting hardware needed to install it, including hex nuts, so installers are not left sourcing small hardware separately. This makes the K23-469-00 a straightforward drop-in replacement for a worn or damaged right-hand 10 inch x 2-1\/4 inch electric brake assembly on a compatible Dexter 3.5K axle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-469-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Trailer Brake Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 10 inches x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3,500 lbs (3.5K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right-hand (Passenger Side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Nev-R-Adjust self-adjusting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 4-Bolt Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Complete brake assembly, hex nuts (Qty 4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.64 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983004614\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits Dexter 3.5K axles equipped with electric brakes\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed for this part\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K23-469-00 for the left or right side of the trailer?\u003c\/strong\u003e The K23-469-00 is a right-hand (passenger side) brake assembly only. It is not interchangeable with a left-hand\/driver side kit, which is a separate Dexter part number, so confirm which side needs replacement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake does this kit include?\u003c\/strong\u003e This kit is a 10 inch x 2-1\/4 inch electric brake assembly, sized for Dexter 3.5K (3,500 lb) axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K23-469-00 self-adjust, or does it need manual adjustment?\u003c\/strong\u003e It uses Dexter's Nev-R-Adjust self-adjusting design, meaning the shoes automatically take up lining wear so periodic manual adjustment is not required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with the K23-469-00 kit?\u003c\/strong\u003e The kit includes the complete 10 inch x 2-1\/4 inch right-hand electric brake assembly plus hex nuts (quantity 4) for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the K23-469-00 brake assembly mounted?\u003c\/strong\u003e It uses a 4-bolt mount pattern, matching the standard bolt circle on Dexter 3.5K electric brake axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-469-00 brake kit weigh?\u003c\/strong\u003e The complete kit weighs 9.64 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the K23-469-00 designed for?\u003c\/strong\u003e It is designed for 3.5K axles, meaning axles rated for 3,500 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the K23-469-00 fit any trailer axle?\u003c\/strong\u003e It fits Dexter 3.5K axles equipped with electric brakes; it is not a universal fit across all axle brands or capacities.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-469-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K23-469-00 is a genuine Dexter part number for the right-hand 10 inch x 2-1\/4 inch 3.5K electric brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K23-469-00 brake kit?\u003c\/strong\u003e The UPC for this kit is 876983004614.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991261098203,"sku":"DEX-K23-469-00","price":126.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-469-00-10-inch-by-2--and-a-quarter-inch-3500lbs-Nev-R-Adjust-Right-Hand-Electric-Drum-Brake-Assembly__90217.1741188170.500.750.jpg?v=1785189115"},{"product_id":"dexter-k23-451-00-electric-trailer-brake-assembly-12-1-4-x-3-3-8-right-hand-passenger-side-fits-9k-10k-lb-axles-7-bolt","title":"Dexter K23-451-00 12-1\/4 Inch x 3-3\/8 Inch Electric Trailer Brake Assembly, Right Hand\/Passenger Side, 9,000-10,000 lb Axles","description":"\u003cp\u003eThe Dexter K23-451-00 is a complete 12-1\/4 inch x 3-3\/8 inch electric forward self-adjusting brake assembly built for 9,000 to 10,000 lb general duty (9K-10K GD) trailer axles. This is the right hand, passenger side brake -- a matching left hand (driver side) assembly is sold under a separate Dexter part number, so be sure you are ordering the side that matches your axle position.\u003c\/p\u003e\u003cp\u003eThe assembly ships fully built as a complete unit rather than a collection of loose parts, so it installs directly onto a compatible 7-bolt pattern axle flange without needing to source and assemble individual brake components. It uses an electric magnet to actuate the shoes, with the magnet wire lead colored yellow for easy identification during wiring. The self-adjusting design automatically compensates for shoe wear as the brake is used, helping maintain consistent stopping performance without manual adjustment. Rated at 10,000 lbs of capacity per pair, this brake is intended for use on 9,000 to 10,000 lb capacity trailer axles.\u003c\/p\u003e\u003cp\u003eEach kit includes the assembled brake unit and an instruction sheet for installation; mounting hardware is not included and should be sourced separately or reused from the axle flange. Dexter builds this brake assembly in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-451-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (Passenger Side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12-1\/4 inches x 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 9,000 to 10,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 7-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Capacity:\u003c\/strong\u003e 10,000 pounds per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric, forward self-adjusting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Rating:\u003c\/strong\u003e General duty (9K-10K GD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Wire Color:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13 x 13 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 9,000 to 10,000 lb capacity trailer axles with a 7-bolt mounting pattern. This is the right hand (passenger side) brake assembly; a left hand (driver side) version is available as a separate Dexter part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter K23-451-00 brake assembly?\u003c\/strong\u003e The K23-451-00 is a 12-1\/4 inch x 3-3\/8 inch electric trailer brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity does the K23-451-00 fit?\u003c\/strong\u003e It fits 9,000 to 10,000 lb capacity trailer axles with a 7-bolt mounting pattern, and is rated for 10,000 lbs of capacity per pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-451-00 a right-hand or left-hand brake?\u003c\/strong\u003e K23-451-00 is the right hand, passenger side brake assembly. A left hand, driver side version is sold under a separate Dexter part number, so confirm you order the correct side for your axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include mounting hardware?\u003c\/strong\u003e No, mounting hardware is not included with the Dexter K23-451-00 brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-451-00 brake assembly weigh?\u003c\/strong\u003e The Dexter K23-451-00 weighs 20.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the electromagnet wire on this brake?\u003c\/strong\u003e The electromagnet on the K23-451-00 has a yellow wire lead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-451-00 self-adjusting?\u003c\/strong\u003e Yes, it is a forward self-adjusting electric brake assembly that automatically compensates for shoe wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat duty rating is the K23-451-00 brake?\u003c\/strong\u003e It carries a 9K-10K general duty (GD) rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this brake kit?\u003c\/strong\u003e The K23-451-00 kit includes the fully assembled electric brake unit and an instruction sheet; mounting hardware is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-451-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K23-451-00 is a genuine Dexter brake assembly, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K23-451-00 brake assembly?\u003c\/strong\u003e The UPC for the K23-451-00 is 876983002023.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the K23-451-00 brake assembly made?\u003c\/strong\u003e Dexter manufactures the K23-451-00 brake assembly in the USA.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991261884635,"sku":"DEX-K23-451-00","price":357.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-451-00_12-and-a-quarter-inch-by-3-and-three-eighths-inch-9K-10K-Self-Adjusting-Right-Hand-Electric-Drum-Brake-Assembly__23341.1747363793.500.750.jpg?v=1785188692"},{"product_id":"dexter-k23-478-00-left-hand-10-x-2-1-4-electric-trailer-brake-assembly-nev-r-adjust-self-adjusting","title":"Dexter Axle Left Hand Electric Brake Assembly 10 x 2-1\/4 Inch, Nev-R-Adjust Self-Adjusting, K23-478-00, 2300-4000 lb Axle Capacity","description":"\u003cp\u003eThe Dexter Axle K23-478-00 is a complete left-hand (LH) 10 inch x 2-1\/4 inch electric brake assembly built for trailer axles rated from 2300 to 4000 pounds capacity. It uses Dexter's Nev-R-Adjust self-adjusting mechanism, which automatically takes up shoe wear during normal reverse-direction braking so the brakes maintain proper clearance without periodic manual adjustment. The assembly mounts to a 4-bolt backing plate and includes the complete left-hand brake assembly as a single unit, ready to install on a compatible Dexter trailer axle.\u003c\/p\u003e\u003cp\u003eThis is the left-hand side assembly only. Dexter also offers the K23-479-00 (RH Electric Nev-R-Adjust) as the matching right-hand counterpart and the K23-463-00 (RH Electric) as a separate right-hand part -- be sure to order the correct side for your axle position, as these are distinct part numbers and installing the wrong side will not fit correctly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-478-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 10 inches x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 2300 to 4000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Nev-R-Adjust self-adjusting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate:\u003c\/strong\u003e 4-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Complete left-hand brake assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983004768\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited 1 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 023-478-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer drum brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Dexter trailer axles rated 2300 to 4000 pounds capacity equipped with electric brakes on the left-hand side.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e023-478-00\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-478-00 a left-side or right-side brake assembly?\u003c\/strong\u003e The K23-478-00 is the left-hand (LH) electric brake assembly. Dexter's right-hand counterpart with the same Nev-R-Adjust feature is a separate part number, K23-479-00, so confirm which side of the axle you are replacing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake is the K23-478-00?\u003c\/strong\u003e It is a 10 inch x 2-1\/4 inch electric brake assembly, sized for Dexter trailer axles in the 2300 to 4000 pound capacity range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake assembly need manual adjustment?\u003c\/strong\u003e No. The K23-478-00 uses Dexter's Nev-R-Adjust self-adjusting mechanism, which takes up shoe wear automatically during normal reverse braking, eliminating routine manual adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake designed for?\u003c\/strong\u003e The Dexter K23-478-00 is designed for trailer axles rated from 2300 to 4000 pounds capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts does the backing plate use?\u003c\/strong\u003e The K23-478-00 uses a 4-bolt backing plate configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the K23-478-00?\u003c\/strong\u003e It ships as a complete left-hand brake assembly, ready to install as a single unit rather than as individual loose components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent number for this part?\u003c\/strong\u003e Yes, the Dexter K23-478-00 corresponds to OEM equivalent part number 023-478-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-478-00 weigh?\u003c\/strong\u003e The complete left-hand brake assembly weighs 12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K23-478-00 is a genuine Dexter Axle part, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between K23-478-00 and K23-463-00?\u003c\/strong\u003e K23-478-00 is the left-hand Nev-R-Adjust electric brake assembly, while K23-463-00 is a right-hand electric brake assembly listed without the Nev-R-Adjust designation -- they are distinct part numbers for different axle sides and configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K23-478-00 come with a warranty?\u003c\/strong\u003e The Dexter K23-478-00 electric brake assembly carries a limited 1 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the K23-478-00 brake assembly?\u003c\/strong\u003e The UPC for the Dexter K23-478-00 left-hand electric brake assembly is 876983004768.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991261982939,"sku":"DEX-K23-478-00","price":168.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-478-00-10-inch-by-2-and-a-quarter-inch-4400-Nev-R-Adjust-Left-Hand-Electric-Drum-Brake-Assembly__05540.1747363793.500.750.jpg?v=1785187999"},{"product_id":"dexter-k23-450-00-left-hand-electric-trailer-brake-assembly-12-1-4-in-x-3-3-8-in-9k-10k-forward-self-adjusting","title":"Dexter K23-450-00 12-1\/4 x 3-3\/8 LH Electric Trailer Brake Assembly, 9K-10K GD Self-Adjusting","description":"\u003cp\u003eThe Dexter K23-450-00 is a complete 12-1\/4 inch x 3-3\/8 inch electric forward self-adjust brake assembly built for 9,000-10,000 lb general duty (GD) trailer axles. This is the left-hand (LH) side assembly, engineered as a direct, ready-to-install unit rather than a collection of loose parts, making it a straightforward replacement when a trailer's electric brake needs to be swapped out.\u003c\/p\u003e\u003cp\u003eAs a self-adjusting design, the K23-450-00 automatically compensates for shoe wear during forward travel, helping maintain consistent stopping performance and reducing the need for manual adjustment compared to non-self-adjusting brake assemblies. Because it is electric, it is intended for trailers running an electric brake system rather than a hydraulic (surge) setup.\u003c\/p\u003e\u003cp\u003eThis part is side-specific: the K23-450-00 is the LH (left-hand) assembly only. Trailers with brakes on both axle ends require the matching right-hand assembly, Dexter part K23-451-00, sold separately. Always confirm which side you are ordering for before installing, since the LH and RH assemblies are not interchangeable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-450-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12-1\/4 inches x 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Forward Self-Adjusting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Rating:\u003c\/strong\u003e 9,000-10,000 lb General Duty (9K-10K GD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessory:\u003c\/strong\u003e Funnel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles rated for 9,000-10,000 lb general duty (GD) service using a 12-1\/4 inch x 3-3\/8 inch electric brake. Left-hand (LH) side only; use K23-451-00 for the right-hand side.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter K23-450-00 brake assembly?\u003c\/strong\u003e It is a 12-1\/4 inch x 3-3\/8 inch electric brake assembly, sized for 9,000-10,000 lb general duty (GD) trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-450-00 a left-side or right-side brake?\u003c\/strong\u003e K23-450-00 is the left-hand (LH) brake assembly. For the right-hand side, order the matching Dexter part K23-451-00 instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake self-adjust?\u003c\/strong\u003e Yes, the K23-450-00 is a forward self-adjusting electric brake assembly, so it automatically compensates for shoe wear during forward travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat duty rating is the K23-450-00 designed for?\u003c\/strong\u003e This assembly is rated for 9,000 to 10,000 lb general duty (GD) trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K23-450-00 weigh?\u003c\/strong\u003e It weighs 20.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-450-00 a complete brake assembly or just individual parts?\u003c\/strong\u003e It is a complete electric forward self-adjust brake assembly, ready for installation rather than a set of individual loose components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the K23-450-00?\u003c\/strong\u003e The package includes the complete brake assembly along with a funnel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the K23-450-00 brake assembly?\u003c\/strong\u003e This is a genuine Dexter part, identified by Dexter part number K23-450-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install K23-450-00 on the right side of my trailer?\u003c\/strong\u003e No. K23-450-00 is built for the left-hand (LH) side only; the right-hand side requires Dexter part K23-451-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K23-450-00 an electric or hydraulic brake?\u003c\/strong\u003e It is an electric brake assembly, intended for trailers with an electric brake system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K23-450-00?\u003c\/strong\u003e The UPC for this brake assembly is 876983002016.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262048475,"sku":"DEX-K23-450-00","price":357.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-450-00-12-and-a-quarter-inch-by-3-and-three-eighths-inch-9K-10K-Self-Adjusting-Left-Hand-Electric-Drum-Brake-Assembly__12810.1747363793.500.750.jpg?v=1785188929"},{"product_id":"dexter-k23-459-00-nev-r-adjust-electric-trailer-brake-assembly-12-in-x-2-in-right-hand-5-200-6-000-lb-axle-replaces-oem-023-459-00","title":"Dexter Axle K23-459-00 Right Side 12 x 2 Inch Electric Trailer Brake Assembly, Nev-R-Adjust CSA, 5200 lb Axle, Replaces 023-459-00","description":"\u003cp\u003eThe Dexter Axle K23-459-00 is a complete 12 inch x 2 inch electric drum brake assembly built for the right side (curb side) of a trailer axle rated to 5200 pounds. It uses Dexter's Nev-R-Adjust CSA design, a self-adjusting electric brake mechanism that maintains proper shoe-to-drum clearance automatically as the linings wear, reducing the need for manual adjustment over the life of the brake. The assembly is supplied complete and boxed, and includes the brake instruction sheet (059-726-00) to guide installation and setup on a compatible 12 x 2 electric brake axle.\u003c\/p\u003e\u003cp\u003eBecause this is a side-specific part, the K23-459-00 is engineered exclusively for the right side of the trailer. The left-side counterpart is a separate part number, K23-458-00, and the two are not interchangeable; installing the wrong side will not seat or actuate correctly. This right-side assembly is intended as a direct fit replacement for worn or damaged electric drum brakes on 5200 lb capacity trailer axles using the 12 x 2 Nev-R-Adjust CSA electric brake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-459-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Side (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric Drum Brake, Nev-R-Adjust CSA (self-adjusting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 5200 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 023-459-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstruction Sheet:\u003c\/strong\u003e 059-726-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 14.01 x 14 x 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983004416\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 5200 lb capacity trailer axles equipped with the 12 x 2 inch Nev-R-Adjust CSA electric drum brake system, right side only.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e023-459-00\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K23-459-00 for the left or right side of the trailer?\u003c\/strong\u003e The K23-459-00 is the right side (RH) brake assembly only. The left side uses a different part number, K23-458-00, so the two are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake is the K23-459-00?\u003c\/strong\u003e It is a 12 inch x 2 inch electric drum brake assembly, sized for trailer axles rated to 5200 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake system does this use?\u003c\/strong\u003e The K23-459-00 uses Dexter's Nev-R-Adjust CSA electric drum brake system, which self-adjusts shoe-to-drum clearance as the linings wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replace an existing OEM part number?\u003c\/strong\u003e Yes, the Dexter K23-459-00 replaces OEM part number 023-459-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-459-00 brake assembly weigh?\u003c\/strong\u003e The complete assembly weighs 11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this brake assembly?\u003c\/strong\u003e The K23-459-00 measures 14.01 x 14 x 3.5 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the K23-459-00?\u003c\/strong\u003e The assembly ships complete and boxed with the brake instruction sheet 059-726-00 for installation reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs manual adjustment required with this brake?\u003c\/strong\u003e No. The Nev-R-Adjust CSA design used in the K23-459-00 automatically adjusts as the brake linings wear, unlike manual-adjust electric brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the K23-459-00 designed for?\u003c\/strong\u003e This brake assembly is designed for a 5200 pound trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K23-459-00 be used on the left side of the axle?\u003c\/strong\u003e No. The K23-459-00 is built specifically for the right side; the left-side equivalent is Dexter part number K23-458-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, the K23-459-00 is a genuine Dexter Axle brake assembly, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262179547,"sku":"DEX-K23-459-00","price":163.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/all_parts__98864.1747363841.500.750.jpg?v=1785188956"},{"product_id":"dexter-ufp-k71-031-00-stainless-steel-bearing-protector-bra-kit-7000-series-2-717-outer-bore","title":"Dexter Stainless Steel Trailer Brake Protector and Bra Kit, 7000 lb, 2.717 Inch Outer Bore - K71-031-00","description":"\u003cp\u003eThe Dexter Stainless Steel Protector and Bra Kit (K71-031-00) is a protective cover kit built for 7000 lb boat trailer brake assemblies with a 2.717 inch outer bore. It is designed to shield the brake caliper and hub area from road spray, salt water, mud, and general debris, helping to slow corrosion on exposed brake hardware -- a common failure point on boat trailers that are regularly launched and retrieved in wet or salt-water environments.\u003c\/p\u003e\u003cp\u003eThe kit is constructed from stainless steel for corrosion resistance and includes a fitted bra-style cover that wraps the protected components. It ships as a single kit (package quantity of 1) sized for direct fit on Dexter 7000 lb, 2.717 inch outer bore brake hardware carrying the 865 designation. Because it is stainless steel rather than painted or plated carbon steel, it resists rust and pitting better over repeated exposure to salt water compared to unprotected hardware.\u003c\/p\u003e\u003cp\u003eThis protector kit is intended for boat trailer owners who want to extend the service life of their brake components between inspections, particularly on trailers used for saltwater launching.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-031-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Designation:\u003c\/strong\u003e 7K 865\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore:\u003c\/strong\u003e 2.717 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 5.37 x 2.75 x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008209\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-031-00 protector kit used for?\u003c\/strong\u003e The K71-031-00 is a stainless steel protector and bra kit that covers a boat trailer brake assembly to shield it from water, salt spray, and road debris, helping reduce corrosion on the brake hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does this kit fit?\u003c\/strong\u003e This kit is sized for a 2.717 inch outer bore brake assembly, matching Dexter's 7000 lb, 865-designated brake hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-031-00 kit made of stainless steel?\u003c\/strong\u003e Yes, the Dexter K71-031-00 protector and bra kit is constructed from stainless steel, which resists rust and pitting better than unprotected or painted brake hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-031-00 kit weigh?\u003c\/strong\u003e The kit weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the K71-031-00 kit?\u003c\/strong\u003e The Dexter K71-031-00 protector kit measures 5.37 x 2.75 x 2.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the K71-031-00 kit?\u003c\/strong\u003e The K71-031-00 ships with a package quantity of one complete protector and bra kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit any boat trailer brake?\u003c\/strong\u003e The K71-031-00 is designed for Dexter's 7000 lb, 2.717 inch outer bore brake assemblies (the 865 designation) rather than being a universal fit for all trailer brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I install a protector and bra kit on my trailer brakes?\u003c\/strong\u003e Boat trailer brakes are frequently exposed to salt water and moisture during launch and retrieval, and the Dexter K71-031-00 stainless steel kit helps shield the brake components from that exposure to slow corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-031-00 an OEM Dexter part?\u003c\/strong\u003e Yes, K71-031-00 is the manufacturer part number assigned by Dexter for this stainless steel protector and bra kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-031-00 kit?\u003c\/strong\u003e The UPC for the Dexter K71-031-00 protector and bra kit is 876983008209.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262277851,"sku":"DEX-K71-031-00","price":124.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-7000lbs-8-Lug-6-and-a-half-inch-Trailer-Buddy-Protector-with-Bra-K71-031-00__31694.1747363800.500.750.jpg?v=1785188068"},{"product_id":"dexter-k23-479-00-right-hand-electric-trailer-brake-assembly-10-in-x-2-25-in-nev-r-adjust-self-adjusting-new-style-flange","title":"Dexter K23-479-00 RH Electric Nev-R-Adjust Trailer Brake Backing Plate, 10 x 2.25 Inch, New Style Flange","description":"\u003cp\u003eThe Dexter K23-479-00 is a right hand (RH) electric brake backing plate assembly built around Dexter's Nev-R-Adjust self-adjusting brake design. It is sized for 10 inch x 2.25 inch drum brakes and is rated for axles in the 2300 to 4000 pound capacity range. The backing plate carries a new style flange, so it is intended for axles and hubs machined to accept the newer flange pattern rather than older flange configurations.\u003c\/p\u003e\u003cp\u003eBecause this is a right hand (RH) specific part, it is built and drilled to mount on the right side of the trailer axle only. It is not interchangeable with a left hand (LH) unit; the opposite side of the axle requires a separate Dexter part number. The Nev-R-Adjust electric brake system is designed to automatically compensate for shoe wear, reducing the need for manual brake adjustment over the life of the linings. This kit is sold as a replacement\/service part for trailer axle brake systems and is intended for installation by someone familiar with trailer axle and brake servicing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-479-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake System:\u003c\/strong\u003e Electric, Nev-R-Adjust (self-adjusting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 10 inches x 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Style:\u003c\/strong\u003e New style flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 2300 to 4000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983004775\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles rated for 2300 to 4000 pounds capacity that use a new style flange and 10 inch x 2.25 inch electric drum brakes. Right hand (RH) side only.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part number.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter K23-479-00 fit the left or right side of the axle?\u003c\/strong\u003e The Dexter K23-479-00 is a right hand (RH) specific brake backing plate and mounts only on the right side of the trailer axle. It is not interchangeable with a left hand unit; the left side of the axle requires a separate Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake size is the K23-479-00 built for?\u003c\/strong\u003e This backing plate is sized for 10 inch x 2.25 inch electric drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Nev-R-Adjust on this Dexter brake?\u003c\/strong\u003e Nev-R-Adjust is Dexter's self-adjusting electric brake design used on the K23-479-00, which automatically compensates for brake shoe wear so the brakes do not need to be manually adjusted as often.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the K23-479-00 rated for?\u003c\/strong\u003e The Dexter K23-479-00 is rated for axles in the 2300 to 4000 pound capacity range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a new style or old style flange?\u003c\/strong\u003e The K23-479-00 uses a new style flange, so it is intended for axle and hub setups machined for the newer flange pattern rather than older style flanges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-479-00 brake backing plate weigh?\u003c\/strong\u003e The Dexter K23-479-00 weighs 12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K23-479-00 a genuine Dexter part?\u003c\/strong\u003e Yes, the K23-479-00 is a genuine Dexter manufacturer part number, not a generic aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this backing plate on both sides of my trailer axle?\u003c\/strong\u003e No. The K23-479-00 is a right hand (RH) specific part and should only be installed on the right side; using it on the left side would put the electric brake components on the wrong side of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K23-479-00 use an electric or hydraulic brake system?\u003c\/strong\u003e The K23-479-00 is built for an electric brake system, using Dexter's Nev-R-Adjust self-adjusting design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I identify the Dexter K23-479-00 for a replacement order?\u003c\/strong\u003e The Dexter K23-479-00 can be verified by its manufacturer part number and its UPC, 876983004775, printed on the packaging.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262539995,"sku":"DEX-K23-479-00","price":167.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-479-00-10-inch-by-2-and-a-quarter-inch-4400-Nev-R-Adjust-Right-Hand-Electric-Drum-Brake-Assembly__79048.1747363794.500.750.jpg?v=1785188730"},{"product_id":"dexter-k71-046-00-brake-shoe-lining-kit-for-10-x-1-1-2-electric-brakes-trailer-axle-brake-shoe-set","title":"Dexter Brake Shoe and Lining Kit K71-046-00 for 10 x 1-1\/2 Inch Electric Brake","description":"\u003cp\u003eThe Dexter K71-046-00 is a brake shoe and lining kit engineered as a direct fit for Dexter's 10 inch x 1-1\/2 inch electric trailer brake assembly. This kit supplies the wear components needed to rebuild the brake, restoring stopping power once the original shoes and lining have worn down from normal use. Because it is manufactured by Dexter specifically for this brake size, installers can rebuild the assembly with parts that match the original fit and function without modification.\u003c\/p\u003e\u003cp\u003eThe kit is packaged with an instruction sheet to guide correct installation and reassembly of the brake shoe and lining components. It is intended for trailer owners, fleet maintenance techs, and marine trailer service shops performing routine brake maintenance or replacing worn friction material on Dexter 10 inch x 1-1\/2 inch electric brakes. Replacing shoes and lining as a matched kit helps ensure even wear and consistent braking performance across both shoes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-046-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Brake Shoe \u0026amp; Lining Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Dexter 10 inch x 1-1\/2 inch electric brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Brake shoe and lining components with instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter 10 inch x 1-1\/2 inch electric brake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-046-00 kit include?\u003c\/strong\u003e The K71-046-00 kit includes the brake shoe and lining components needed to rebuild a Dexter 10 inch x 1-1\/2 inch electric brake, along with an instruction sheet for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake does the K71-046-00 fit?\u003c\/strong\u003e K71-046-00 is fitted specifically to the Dexter 10 inch x 1-1\/2 inch electric brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-046-00 brake shoe and lining kit weigh?\u003c\/strong\u003e This kit weighs 2.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-046-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-046-00 is manufactured by Dexter as a direct-fit brake shoe and lining kit for its 10 inch x 1-1\/2 inch electric brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-046-00 kit come with installation instructions?\u003c\/strong\u003e Yes, an instruction sheet is included with the K71-046-00 brake shoe and lining kit to guide installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill K71-046-00 fit a hydraulic trailer brake?\u003c\/strong\u003e No, K71-046-00 is designed for the Dexter 10 inch x 1-1\/2 inch electric brake, not a hydraulic brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the brake shoe and lining together as a kit?\u003c\/strong\u003e Replacing the shoe and lining together, as provided in the K71-046-00 kit, helps ensure even wear and consistent braking performance across the brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho should install the K71-046-00 brake shoe and lining kit?\u003c\/strong\u003e Trailer owners comfortable with mechanical repair, fleet maintenance technicians, and trailer service shops commonly install the K71-046-00 kit as part of routine electric brake maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K71-046-00 sold as a pair or a single brake's worth of parts?\u003c\/strong\u003e K71-046-00 supplies the shoe and lining components for one Dexter 10 inch x 1-1\/2 inch electric brake.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262834907,"sku":"DEX-K71-046-00","price":146.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-10x1.5-electric-brake-shoe-lining-kit-k71-046-00__66731.1747363836.500.750.jpg?v=1785329082"},{"product_id":"dexter-k71-125-00-brake-magnet-kit-black-wire-fits-12-x-2-7k-and-10-x-2-1-4-4-4k-electric-trailer-brakes-one-brake","title":"Dexter K71-125-00 Magnet Kit for 12 x 2 Inch 7K and 10 x 2-1\/4 Inch 4.4K Brakes, Black Wire, One Brake","description":"\u003cp\u003eThe Dexter K71-125-00 Magnet Kit supplies the magnet and related hardware needed to service one Dexter 12 inch x 2 inch 7K electric brake or one Dexter 10 inch x 2 1\/4 inch 4.4K electric brake. The kit is built for boat trailer axles using Dexter electric brake assemblies, where a worn or burned-out magnet is one of the most common reasons for weak, uneven, or failed brake engagement. Because trailer brake magnets wear down over time from friction against the brake drum, replacing the magnet along with its related components restores consistent electric braking performance without requiring a full brake assembly replacement.\u003c\/p\u003e\u003cp\u003eThis kit includes the magnet (after 7\/16), the return spring, and the small hardware pieces that mount and retain them on the brake backing plate, along with an instruction sheet for installation. The kit is sized for one brake, so a trailer with brakes on both sides of an axle, or on multiple axles, will need one kit per brake being serviced.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-125-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 12 x 2 Magnet Kit, 7K, Black Wire, For One Brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e One brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983000227\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Spring, Magnet (after 7\/16), Instruction Sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Part Numbers:\u003c\/strong\u003e 027-009-00, 042-143-00, 046-080-00, 046-175-00, 059-511-00 (1 each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDexter 12 inch x 2 inch 7K brakes\u003c\/li\u003e\n\u003cli\u003eDexter 10 inch x 2 1\/4 inch 4.4K brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-125-00 magnet kit include?\u003c\/strong\u003e The Dexter K71-125-00 magnet kit includes the magnet (after 7\/16), a return spring, and an instruction sheet, along with the small mounting hardware identified by component part numbers 027-009-00, 042-143-00, 046-080-00, 046-175-00, and 059-511-00, one of each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich brakes does this magnet kit fit?\u003c\/strong\u003e K71-125-00 fits Dexter 12 inch x 2 inch 7K electric brakes and Dexter 10 inch x 2 1\/4 inch 4.4K electric brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brakes does one kit service?\u003c\/strong\u003e One K71-125-00 kit is packaged for one brake, so a full axle with brakes on both sides needs two kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the magnet wire on this kit?\u003c\/strong\u003e The magnet included in the K71-125-00 kit uses black wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-125-00 magnet kit weigh?\u003c\/strong\u003e The kit weighs 1.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with installation instructions?\u003c\/strong\u003e Yes, an instruction sheet is included with the Dexter K71-125-00 magnet kit to guide installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit compatible with both 12 inch and 10 inch Dexter brakes?\u003c\/strong\u003e Yes, Dexter K71-125-00 is designed to fit both the 12 inch x 2 inch 7K brake and the 10 inch x 2 1\/4 inch 4.4K brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the magnet on my trailer brake?\u003c\/strong\u003e A worn or weak magnet is a common cause of inconsistent electric brake engagement, and the K71-125-00 kit provides the magnet and related hardware needed to restore proper braking on a Dexter electric brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the magnet in this kit an OEM Dexter part?\u003c\/strong\u003e Yes, the magnet and hardware in K71-125-00 are supplied as a genuine Dexter magnet kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number 027-009-00 used for in this kit?\u003c\/strong\u003e 027-009-00 is one of the component hardware pieces included in the Dexter K71-125-00 magnet kit, supplied in a quantity of one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any additional parts to complete the repair?\u003c\/strong\u003e The K71-125-00 kit provides the magnet, spring, and mounting hardware for one brake; any brake components not listed in this kit's contents would need to be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the K71-125-00 kit?\u003c\/strong\u003e K71-125-00 is listed as a boat trailer brake component, specifically a magnet kit for Dexter electric brakes.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263097051,"sku":"DEX-K71-125-00","price":40.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-10-inch-by-2-and-a-quarter-inch-4400lbs--12-inch-by-2-inch-7000lbs-Electric-Brake-Magnet-Kit-K71-125-00__85259.1747363797.500.750.jpg?v=1785329087"},{"product_id":"dexter-k71-378-00-electric-brake-magnet-kit-for-12-1-4-x-5-15k-brakes-after-6-92","title":"Dexter K71-378-00 Magnet Kit for 12 1\/4 x 5 15K Electric Brakes (After 6\/92)","description":"\u003cp\u003eThe Dexter K71-378-00 Magnet Kit is a complete replacement magnet kit for Dexter 12 1\/4 inch x 5 inch 15K electric trailer brakes manufactured after 6\/92. The kit is built for boat trailer axles running Dexter's 15K electric brake assemblies and supplies everything needed to service one brake magnet, including the magnet retainer and the magnet assembly with blue wire lead. Each of the four component part numbers in the kit ships in a quantity of one, so the set is ready to install as a matched group rather than sourcing individual pieces separately.\u003c\/p\u003e\u003cp\u003eThis kit is intended for trailer owners and service techs replacing worn or failed electric brake magnets on Dexter 12 1\/4 x 5 15K brake assemblies, restoring proper electric brake engagement and stopping performance. Because it is sold as a complete kit under a single Dexter part number, it helps ensure the retainer and magnet assembly are correctly matched for this brake size and vintage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-378-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Boat Trailer Brake Magnet Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Dexter 12 1\/4 inch x 5 inch 15K electric brakes (after 6\/92)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 4 components, 1 each - Magnet Retainer (027-050-00), Magnet Assembly - blue wire (042-131-00), 046-117-00, 059-511-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 18 x 10.63 x 9.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983001286\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter 12 1\/4 inch x 5 inch 15K electric brakes (after 6\/92)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo specific OEM cross-reference numbers listed for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-378-00 magnet kit fit?\u003c\/strong\u003e The K71-378-00 magnet kit fits Dexter 12 1\/4 inch x 5 inch 15K electric trailer brakes manufactured after 6\/92.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in this magnet kit?\u003c\/strong\u003e The kit includes four Dexter components, one of each: a magnet retainer (027-050-00), a magnet assembly with blue wire (042-131-00), part number 046-117-00, and part number 059-511-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-378-00 kit use a red or blue wire magnet?\u003c\/strong\u003e The magnet assembly included in the K71-378-00 kit is a blue wire magnet assembly (Dexter part 042-131-00).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-378-00 magnet kit weigh?\u003c\/strong\u003e The K71-378-00 magnet kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the K71-378-00 magnet kit packaging?\u003c\/strong\u003e The K71-378-00 ships in packaging measuring 18 x 10.63 x 9.13 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the K71-378-00 kit work on 15K electric brakes made before 6\/92?\u003c\/strong\u003e Dexter specifies the K71-378-00 magnet kit for 12 1\/4 inch x 5 inch 15K electric brakes made after 6\/92; brakes produced before that date are not covered by this fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit for one brake or a pair?\u003c\/strong\u003e The K71-378-00 is a single magnet kit for one brake assembly; each component in the kit ships in a quantity of one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-378-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-378-00 is the Dexter part number for this magnet kit, and every component inside carries its own Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-378-00 magnet kit?\u003c\/strong\u003e The Dexter K71-378-00 magnet kit carries UPC 876983001286.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the magnet retainer or magnet assembly separately?\u003c\/strong\u003e The K71-378-00 is sold as a complete kit containing the magnet retainer, magnet assembly, and two additional components together under a single Dexter part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263490267,"sku":"DEX-K71-378-00","price":160.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-7200-to-15000-12-1-over-4-inch-Electric-Brake-Magnet-Kit-K71-378-00__61281.1747363798.500.750.jpg?v=1785188207"},{"product_id":"hydraulic-drum-brake-install-kit-12-in-drum-8-000-lb-actuator-6-lug-single-axle-trailer-mpn-k71-g00-24","title":"Dexter K71-G00-24 Complete Hydraulic Drum Brake Kit, 12 Inch Drum, 8000 Lb Actuator, 6 Lug Trailer Axle","description":"\u003cp\u003eThe Dexter K71-G00-24 is a complete hydraulic drum brake kit built for a single-axle, 6-lug trailer wheel end. It is designed to supply everything needed for a full brake and hub assembly in one package, so an installer is not left sourcing separate hubs, drums, or hardware. The kit centers on a 12 inch drum brake assembly paired with an 8,000 lb capacity hydraulic actuator that uses a cast ball clamp and an oversize aluminum master cylinder for reliable trailer braking under heavy tongue loads.\u003c\/p\u003e\u003cp\u003eThe drum hubs arrive preassembled and pregreased, complete with cups, cones, seals, and dust covers, which cuts down on assembly time at installation. The brake system uses a free-backing drum brake design with an aluminum wheel cylinder and stainless steel springs, and the steel components carry a GalvX coating for corrosion resistance in wet trailering environments. A brake hose kit is included, made up of 240 inch, 76 inch, and 24 inch DOT-rated flexible brake hoses along with brass fittings and the attachment hardware needed to plumb the system. DOT 3 brake fluid is not included and must be supplied separately. This kit fits a single axle, 6-lug wheel trailer application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G00-24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Trailer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Capacity:\u003c\/strong\u003e 8,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Lug Count:\u003c\/strong\u003e 6 lugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaster Cylinder:\u003c\/strong\u003e Oversize aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Cylinder Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Component Finish:\u003c\/strong\u003e GalvX coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Hose Lengths Included:\u003c\/strong\u003e 240 inches, 76 inches, and 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Fittings:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Fluid:\u003c\/strong\u003e DOT 3 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628824087\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 140 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSingle axle, 6-lug wheel trailer.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-G00-24 brake kit include?\u003c\/strong\u003e The K71-G00-24 kit includes preassembled and pregreased drum hubs with cups, cones, seals, and dust covers, a 12 inch drum brake assembly, an 8,000 lb hydraulic actuator with cast ball clamp and oversize aluminum master cylinder, and a full brake hose kit with 240 inch, 76 inch, and 24 inch DOT flexible hoses and brass fittings. DOT 3 brake fluid is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer axle does this kit fit?\u003c\/strong\u003e This kit is sized for a single axle, 6-lug wheel trailer with a 12 inch drum brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the actuator capacity on the K71-G00-24?\u003c\/strong\u003e The hydraulic actuator included in this Dexter kit is rated for 8,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs brake fluid included with this kit?\u003c\/strong\u003e No, DOT 3 brake fluid is not included with the Dexter K71-G00-24 kit and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the wheel cylinder made from?\u003c\/strong\u003e The drum brake assembly in this kit uses an aluminum wheel cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hubs already assembled?\u003c\/strong\u003e Yes, the drum hubs in the K71-G00-24 kit come preassembled and pregreased with cups, cones, seals, and dust covers already installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat corrosion protection do the steel parts have?\u003c\/strong\u003e The steel components in this kit carry a GalvX coating, and the springs are stainless steel, for corrosion resistance in marine and trailering environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the brake hoses included in the kit?\u003c\/strong\u003e Three DOT flexible brake hoses are included: 240 inches, 76 inches, and 24 inches, along with brass fittings and attachment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G00-24 brake kit weigh?\u003c\/strong\u003e The complete kit weighs 140 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lugs does this wheel hub have?\u003c\/strong\u003e This Dexter drum brake kit is built for a 6-lug wheel trailer hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of master cylinder does this kit use?\u003c\/strong\u003e An oversize aluminum master cylinder is used with the actuator's cast ball clamp in the K71-G00-24 kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264407771,"sku":"DEX-K71-G00-24","price":774.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-82408_lg__64576.1722499834.500.750.jpg?v=1785188309"},{"product_id":"dexter-k71-g00-45-hydraulic-drum-brake-kit-10-in-drum-6-600-lb-actuator-5-lug-single-axle-trailer","title":"Dexter K71-G00-45 10 Inch Hydraulic Drum Brake Kit, 6,600 Lb Actuator, 5-Lug Single Axle Trailer","description":"\u003cp\u003eThe Dexter K71-G00-45 is a complete hydraulic drum brake kit built for a single axle, 5-lug wheel trailer. The kit is centered on 10 inch brake drums and a hydraulic actuator rated for 6,600 lbs, giving the trailer a matched, ready-to-install braking system rather than a collection of separate parts. Drum hubs arrive preassembled and pregreased, complete with cups, cones, seals, and dust covers, so the hub bearings are ready to go straight onto the axle.\u003c\/p\u003e\u003cp\u003eBraking is handled by freebacking drum brakes that use an aluminum wheel cylinder and stainless steel springs, paired with a GalvX coating on the steel components for added corrosion resistance in wet trailering environments. The actuator itself uses a cast ball clamp and an oversized aluminum master cylinder to drive hydraulic pressure through the system. A full brake hose kit is included, with 240 inch, 76 inch, and 24 inch DOT flexible brake hoses fitted with brass fittings and attachment hardware, covering the connections from actuator to each wheel. DOT 3 brake fluid is not included and must be supplied separately.\u003c\/p\u003e\u003cp\u003eThis kit suits trailer owners replacing a worn-out or corroded hydraulic drum brake system on a single axle, 5-lug trailer where a 10 inch drum and 6,600 lb actuator capacity are the correct match.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G00-45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Drum Brake Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Capacity:\u003c\/strong\u003e 6,600 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLug Count:\u003c\/strong\u003e 5-Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Configuration:\u003c\/strong\u003e Single Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Cylinder Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e GalvX corrosion-resistant coating on steel components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Hose Lengths:\u003c\/strong\u003e 240 inches, 76 inches, 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Hose Fittings:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaster Cylinder:\u003c\/strong\u003e Oversized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Clamp:\u003c\/strong\u003e Cast ball clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 83.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983011124\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum does the Dexter K71-G00-45 kit use?\u003c\/strong\u003e This kit is built around 10 inch brake drums, matched to a hydraulic actuator rated for 6,600 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lug holes does this brake kit fit?\u003c\/strong\u003e The Dexter K71-G00-45 is configured for a 5-lug wheel trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit for a single axle or tandem axle trailer?\u003c\/strong\u003e It is designed for a single axle trailer with 5-lug wheels, not a tandem axle setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuator capacity does the K71-G00-45 use?\u003c\/strong\u003e The kit includes a hydraulic actuator rated for 6,600 lbs, with a cast ball clamp and an oversized aluminum master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the wheel hubs pregreased and ready to install?\u003c\/strong\u003e Yes, the drum hubs in the Dexter K71-G00-45 kit come preassembled and pregreased with cups, cones, seals, and dust covers already fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake hoses are included in the kit?\u003c\/strong\u003e A full DOT flexible brake hose set is included: 240 inch, 76 inch, and 24 inch hoses, each fitted with brass fittings and attachment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs brake fluid included with this kit?\u003c\/strong\u003e No, DOT 3 brake fluid is not included in the Dexter K71-G00-45 kit and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the wheel cylinder made from?\u003c\/strong\u003e The wheel cylinder in this drum brake kit is aluminum, paired with stainless steel brake springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit resist corrosion?\u003c\/strong\u003e The steel components carry a GalvX coating, which is applied specifically to improve corrosion resistance on a system that is regularly exposed to water when trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G00-45 kit weigh?\u003c\/strong\u003e The complete kit weighs 83.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brakes does this kit use, mechanical or hydraulic?\u003c\/strong\u003e The K71-G00-45 is a hydraulic drum brake kit, using an aluminum master cylinder and wheel cylinders rather than a mechanical or electric brake actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K71-G00-45 kit?\u003c\/strong\u003e The kit includes preassembled and pregreased drum hubs, freebacking drum brakes, a hydraulic actuator with cast ball clamp and oversized aluminum master cylinder, and a full set of DOT flexible brake hoses with brass fittings and hardware.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264637147,"sku":"DEX-K71-G00-45","price":862.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-82407_large__49025.1558176536.500.750.jpg?v=1785188877"},{"product_id":"10-inch-e-coated-drum-brake-kit-for-boat-trailers-left-and-right-assemblies-mpn-k71-g01-06","title":"Dexter 10 Inch E-Coated Drum Brake Kit, K71-G01-06","description":"\u003cp\u003eThe Dexter K71-G01-06 is a 10 inch E-Coated drum brake kit built for trailer applications that demand reliable, corrosion-resistant stopping power. This kit includes both the left and right brake assemblies, so a single kit outfits both sides of the axle. Each side features an aluminum wheel cylinder and a stainless steel spring, paired with brake pads that are bonded and riveted to the backing plate with bronze rivets for a secure, long-lasting friction surface.\u003c\/p\u003e\u003cp\u003eBeyond the core brake assemblies, the kit also supplies the small parts needed for a complete drum brake replacement: springs, an adjuster tool, brass hardware, and hardware for the backing plate. The E-Coated finish is applied to help the components resist the corrosive effects of a wet, marine trailer environment. Whether you are replacing worn-out drum brakes or rebuilding a trailer axle from the ground up, the Dexter K71-G01-06 kit provides the matched left and right components and hardware needed to get the job done in one purchase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G01-06\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e E-Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Cylinder Material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Pad Attachment:\u003c\/strong\u003e Bonded and riveted with bronze rivets to backing plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Coverage:\u003c\/strong\u003e Left and right sides included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.94 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-G01-06 drum brake kit include?\u003c\/strong\u003e The kit includes the left and right drum brake assemblies, each with an aluminum wheel cylinder, a stainless steel spring, and brake pads bonded and riveted to the backing plate with bronze rivets. It also includes springs, an adjuster tool, brass hardware, and hardware for the backing plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit cover both sides of the trailer axle?\u003c\/strong\u003e Yes, the K71-G01-06 kit includes both the left and right drum brake assemblies, so one kit is enough to outfit both sides of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brakes are in this kit?\u003c\/strong\u003e This is a 10 inch drum brake kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish is used on the Dexter K71-G01-06 brake components?\u003c\/strong\u003e The components in this kit have an E-Coated finish, which is applied to help resist corrosion in wet trailer environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the wheel cylinder made of?\u003c\/strong\u003e The wheel cylinder included in the K71-G01-06 kit is made of aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the brake pads attached to the backing plate?\u003c\/strong\u003e The brake pads in this kit are bonded and riveted to the backing plate using bronze rivets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with the K71-G01-06 kit?\u003c\/strong\u003e Brass hardware is included, along with hardware for the backing plate, springs, and an adjuster tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G01-06 drum brake kit weigh?\u003c\/strong\u003e This drum brake kit weighs 20.94 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the spring in this kit made of stainless steel?\u003c\/strong\u003e Yes, the K71-G01-06 kit uses a stainless steel spring on each side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake kit made by Dexter?\u003c\/strong\u003e Yes, the K71-G01-06 is a Dexter brand 10 inch E-Coated drum brake kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264833755,"sku":"DEX-K71-G01-06","price":226.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-82095_large__09857.1558176050.500.750.jpg?v=1785188017"},{"product_id":"12-inch-trailer-drum-brake-kit-e-coated-left-and-right-pair-dexter-k71-g01-07","title":"Dexter K71-G01-07 12 Inch Trailer Drum Brake Backing Plate Assembly Parts Kit","description":"\u003cp\u003eThe Dexter K71-G01-07 is a 12 inch drum brake backing plate assembly parts kit built for trailer axle drum brake systems. This kit is designed to restore or rebuild a drum brake backing plate assembly with all the core wear components in one package, saving the time and cost of sourcing individual parts separately.\u003c\/p\u003e\u003cp\u003eThe kit's backing plate assembly includes a wheel cylinder, springs, brake pads bonded and riveted to the backing plate with rivets, and the backing itself. Rounding out the kit are the smaller parts that typically wear out or go missing during a brake job: adjuster hardware, springs, and the brass and mounting hardware needed to reinstall the backing plate assembly. Having these wear items bundled together in one kit reduces the chance of missing a small but critical part mid-installation.\u003c\/p\u003e\u003cp\u003eThis backing plate assembly kit is intended for 12 inch trailer drum brake systems and is suited for trailer owners, marine trailer service shops, and DIYers performing a full drum brake rebuild rather than a partial parts swap.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G01-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Size:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 31.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Backing plate assembly, wheel cylinder, springs, bonded and riveted brake pads, adjuster hardware, brass hardware, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983011025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K71-G01-07 backing plate kit?\u003c\/strong\u003e The K71-G01-07 kit includes a full backing plate assembly with wheel cylinder, springs, brake pads bonded and riveted to the backing, plus adjuster hardware, brass hardware, and mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is this kit designed for?\u003c\/strong\u003e This Dexter backing plate assembly kit is designed for 12 inch trailer drum brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G01-07 kit weigh?\u003c\/strong\u003e The Dexter K71-G01-07 backing plate assembly parts kit weighs 31.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-G01-07 kit include the brake pads?\u003c\/strong\u003e Yes, the brake pads are bonded and riveted to the backing plate as part of the K71-G01-07 assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full backing plate assembly or just replacement hardware?\u003c\/strong\u003e The K71-G01-07 is a complete backing plate assembly kit, not just a hardware-only refresh kit, so it includes the wheel cylinder, springs, and pads along with the smaller hardware pieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures part K71-G01-07?\u003c\/strong\u003e Part number K71-G01-07 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for a full drum brake rebuild?\u003c\/strong\u003e Yes, because the K71-G01-07 kit bundles the backing plate assembly along with the wheel cylinder, springs, pads, and hardware, it covers the components needed for a full 12 inch drum brake rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with mounting hardware?\u003c\/strong\u003e Yes, brass hardware and mounting hardware for the backing plate are included with the Dexter K71-G01-07 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-G01-07 kit?\u003c\/strong\u003e The UPC for the Dexter K71-G01-07 backing plate assembly parts kit is 876983011025.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the wheel cylinder included in the K71-G01-07 kit?\u003c\/strong\u003e Yes, a wheel cylinder is included as part of the K71-G01-07 backing plate assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264899291,"sku":"DEX-K71-G01-07","price":221.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/82096__99783.1737876704.500.750.jpg?v=1785188331"},{"product_id":"trailer-brake-wheel-cylinder-kit-for-10-12-drum-brakes-mpn-k71-g02-55","title":"Dexter K71-G02-55 Brake Drum Wheel Cylinder Kit for 10 Inch and 12 Inch Trailer Brakes","description":"\u003cp\u003eThe Dexter K71-G02-55 is a brake drum wheel cylinder kit built for trailer drum brake systems, sized to fit both 10 inch and 12 inch trailer brake drums. Each kit is supplied as a single new wheel cylinder unit, ready to replace a worn or leaking cylinder on a trailer's drum brake assembly. The wheel cylinder is the hydraulic component that pushes the brake shoes outward against the drum when the brakes are applied, so a failed or seeping cylinder can mean reduced stopping power or brake fluid loss. Replacing it with a new Dexter unit restores proper hydraulic pressure to the brake shoes.\u003c\/p\u003e\u003cp\u003eThe kit ships in a compact package measuring 7 inches x 6 inches x 4 inches and weighs 1.38 pounds, and it is backed by a 1 year warranty. Because it is sized for both 10 inch and 12 inch drum brakes, it covers two of the most common trailer brake drum sizes used on boat trailers, utility trailers, and other drum-braked trailers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Drum Size:\u003c\/strong\u003e 10 inch and 12 inch trailer brake drums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7 inches x 6 inches x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.38 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983009619\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-G02-55 kit include?\u003c\/strong\u003e The Dexter K71-G02-55 kit includes one new brake drum wheel cylinder for trailer drum brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trailer brake drum sizes does this wheel cylinder fit?\u003c\/strong\u003e The K71-G02-55 is sized to fit both 10 inch and 12 inch trailer brake drums.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G02-55 weigh?\u003c\/strong\u003e This wheel cylinder kit weighs 1.38 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for this part?\u003c\/strong\u003e The Dexter K71-G02-55 ships in a package measuring 7 inches x 6 inches x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-G02-55 a new part or reconditioned?\u003c\/strong\u003e It is a new wheel cylinder, not a reconditioned or remanufactured unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wheel cylinders come in one K71-G02-55 kit?\u003c\/strong\u003e Each kit contains 1 wheel cylinder unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter K71-G02-55 come with a warranty?\u003c\/strong\u003e Yes, the K71-G02-55 wheel cylinder kit is backed by a 1 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill one K71-G02-55 kit work on both 10 inch and 12 inch drums, or do I need a different part for each?\u003c\/strong\u003e The same K71-G02-55 kit is sized for both 10 inch and 12 inch trailer brake drums, so one part number covers both drum sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-G02-55?\u003c\/strong\u003e The UPC for this wheel cylinder kit is 876983009619.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake system is the K71-G02-55 designed for?\u003c\/strong\u003e The K71-G02-55 is designed for trailer drum brake systems, replacing the hydraulic wheel cylinder that actuates the brake shoes.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991266537691,"sku":"DEX-K71-G02-55","price":91.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-80994_lg_1__20486.1558175782.500.750.jpg?v=1785188031"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/t-d-80994_lg_1__20486.1558175782.500.750.jpg?v=1785356543","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trailering-trailer-brakes-drum-brake-assemblies-parts.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}