{"title":"Trailer Hardware \u0026 Accessories","description":null,"products":[{"product_id":"trailering-clips-for-volvo-penta-omc-cobra-stern-drives-replaces-oem-174448-stainless-steel-set-of-2-sierra-18-9098","title":"Sierra 18-9098 Trailering Clips, Replaces 174448, Set of 2, Fits SX Stern Drive Models thru 2006","description":"\u003cp\u003eThe Sierra 18-9098 Trailering Clips are a set of two clips designed to secure and support the outdrive unit while a boat is being trailered, helping prevent stress and movement of the drive during transport. They are built as a direct replacement for OEM part 174448 and are designed to fit all SX stern drive models through 2006.\u003c\/p\u003e\u003cp\u003eMade from stainless steel for corrosion resistance in the marine environment, these clips are engineered to meet or exceed original equipment quality, giving boat owners a reliable way to keep the drive properly supported on the trailer without relying on a worn or missing original clip. Each order includes a complete set of two clips, matching the original equipment quantity so both sides of the application are covered.\u003c\/p\u003e\u003cp\u003eThese trailering clips are a straightforward maintenance item for owners of SX-equipped boats who need to replace cracked, corroded, or missing factory clips. Because they are sold as a matched pair, they simplify reordering versus sourcing individual clips separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9098\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trailering Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Set of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 13.5 x 3.8 x 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.98 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e All SX Models thru 2006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAll SX stern drive models thru 2006\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e174448\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-9098 Trailering Clip do?\u003c\/strong\u003e It secures and supports the outdrive unit while the boat is being towed on a trailer, part of a set of two clips that replace the original equipment support clips on SX stern drive models thru 2006.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9098 a direct replacement for OEM part 174448?\u003c\/strong\u003e Yes, the 18-9098 Trailering Clip set is manufactured to replace OEM part number 174448 and is built to meet or exceed the quality of the original equipment clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clips come in the Sierra 18-9098 set?\u003c\/strong\u003e The 18-9098 is sold as a set of two trailering clips, matching the original equipment quantity so both are replaced together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-9098 clip made of?\u003c\/strong\u003e Stainless steel, chosen for its resistance to corrosion in marine and trailering environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich stern drive models does the 18-9098 Trailering Clip fit?\u003c\/strong\u003e It is designed for all SX stern drive models thru 2006.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-9098 Trailering Clip set?\u003c\/strong\u003e The set measures 13.5 x 3.8 x 1.6 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-9098 Trailering Clip set weigh?\u003c\/strong\u003e The set weighs 0.98 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-9098 clip genuine OEM or aftermarket?\u003c\/strong\u003e It is an aftermarket replacement part manufactured by Sierra to meet or exceed original equipment quality, cross-referencing OEM part 174448.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-9098 clip work on a 2007 or newer SX-A drive?\u003c\/strong\u003e No; the 18-9098 is designed for SX models thru 2006. Newer Volvo SX-A and DPS-A drives (2007-Up) use a different trailering clip part number, so the model year and drive designation should be confirmed before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace both trailering clips at once?\u003c\/strong\u003e The 18-9098 is sold as a matched set of two clips, so both are replaced together as a pair rather than individually.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436136155,"sku":"SIE-18-9098","price":26.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-9098_lg__49806.1558133876.500.750.jpg?v=1785188522"},{"product_id":"sierra-18-9099-trailering-clips-pair-replaces-oem-817019a1-fits-mercruiser-alpha-one-alpha-gen-ii-bravo-i-ii-iii-blackhawk","title":"Sierra Trailering Clips 18-9099, Replaces 817019A1, Fits Alpha One, Alpha Generation II, Bravo I\/II\/III and Blackhawk","description":"\u003cp\u003eThe Sierra Trailering Clips, part number 18-9099, are replacement clips used to secure the outdrive of a Mercury Marine sterndrive during trailering. Sold as a pair, each clip has an inside diameter of 3\/4 inch and a length of 11 1\/8 inches, sized to fit the trailering clip application on Alpha One, Alpha Generation II, Bravo I, Bravo II, Bravo III, and Blackhawk drives. These clips are a direct cross-reference to a wide range of Mercury Marine OEM part numbers, making it easy to find the correct replacement using whichever number is printed on the old clip or listed in service documentation. Trailering clips are a wear item that should be inspected and replaced when worn, bent, or corroded, since a failed clip can allow the outdrive to shift on the trailer during transport. Package 18-9099 includes 2 clips (one pair), which is the quantity needed for a single trailering application. Sierra part 18-9099 weighs 1.26 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9099\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailering Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 11 1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Alpha One, Alpha Generation II, Bravo I, Bravo II, Bravo III, Blackhawk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282378134\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 817019A1, 817019Q2, 817019A2, 879078, 86459A2, 86459A1, 86459, 41155A2, 41155A1, 32657A4, 32657A3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAlpha One\u003c\/li\u003e\n\u003cli\u003eAlpha Generation II\u003c\/li\u003e\n\u003cli\u003eBravo I\u003c\/li\u003e\n\u003cli\u003eBravo II\u003c\/li\u003e\n\u003cli\u003eBravo III\u003c\/li\u003e\n\u003cli\u003eBlackhawk\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e817019A1\u003c\/li\u003e\n\u003cli\u003e817019Q2\u003c\/li\u003e\n\u003cli\u003e817019A2\u003c\/li\u003e\n\u003cli\u003e879078\u003c\/li\u003e\n\u003cli\u003e86459A2\u003c\/li\u003e\n\u003cli\u003e86459A1\u003c\/li\u003e\n\u003cli\u003e86459\u003c\/li\u003e\n\u003cli\u003e41155A2\u003c\/li\u003e\n\u003cli\u003e41155A1\u003c\/li\u003e\n\u003cli\u003e32657A4\u003c\/li\u003e\n\u003cli\u003e32657A3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sierra part 18-9099 used for?\u003c\/strong\u003e Sierra 18-9099 is a pair of trailering clips used to secure a Mercury Marine sterndrive outdrive while the boat is being trailered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clips come in the 18-9099 package?\u003c\/strong\u003e The 18-9099 package includes 2 trailering clips (one pair), which is the full set needed for a single application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 18-9099 fit an Alpha One outdrive?\u003c\/strong\u003e Yes, Sierra trailering clip 18-9099 fits Alpha One, Alpha Generation II, Bravo I, Bravo II, Bravo III, and Blackhawk drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-9099 fit Bravo III drives?\u003c\/strong\u003e Bravo III is covered by Sierra 18-9099, along with Bravo I, Bravo II, Alpha One, Alpha Generation II, and Blackhawk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-9099 trailering clip?\u003c\/strong\u003e Each clip has an inside diameter of 3\/4 inch and a length of 11 1\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does 18-9099 replace?\u003c\/strong\u003e Sierra 18-9099 cross-references to OEM numbers 817019A1, 817019Q2, 817019A2, 879078, 86459A2, 86459A1, 86459, 41155A2, 41155A1, 32657A4, and 32657A3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 817019A1 the same part as Sierra 18-9099?\u003c\/strong\u003e 817019A1 is one of the OEM numbers that Sierra 18-9099 directly replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-9099 trailering clip set weigh?\u003c\/strong\u003e The 18-9099 pair of trailering clips weighs 1.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should trailering clips be replaced?\u003c\/strong\u003e Trailering clips like the Sierra 18-9099 should be replaced when they are worn, bent, or corroded, since a failed clip can let the outdrive shift on the trailer during transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-9099 fit a Blackhawk drive?\u003c\/strong\u003e Yes, the Blackhawk drive is included in the fitment for Sierra trailering clip 18-9099, alongside the Alpha and Bravo drive families listed for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9099 sold individually or as a pair?\u003c\/strong\u003e Sierra 18-9099 is sold as a pair (package of 2), which is the quantity needed for one trailering clip installation.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436168923,"sku":"SIE-18-9099","price":33.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-9099_lg__16600.1729086707.500.750.jpg?v=1785188669"},{"product_id":"sierra-18-9096-trailering-clips-for-volvo-penta-sx-a-dps-a-2007-up-replaces-volvo-3847547-set-of-2-white","title":"Sierra 18-9096 Trailering Clips, Set of 2 - Replaces Volvo Penta 3847547 - Fits SX-A, DPS-A 2007-Up","description":"\u003cp\u003eThe Sierra 18-9096 Trailering Clip set secures Volvo Penta SX-A and DPS-A stern drives in the trailered (up) position, keeping the outdrive from dropping down while the boat is being towed or stored on a trailer. This is an interchange part for Volvo Penta 3847547 and is built to meet or exceed the fit and function of the original equipment clip it replaces.\u003c\/p\u003e\u003cp\u003eEach set includes two plastic trailering clips finished in white, with a hex-head, clip-on design that mounts to the drive unit. Each clip measures 7-1\/4 inch in length, and the retail package measures 13.5 x 3.8 x 1.6 inches. This is a purpose-built replacement, not a universal clamp, so confirming the drive model before ordering matters.\u003c\/p\u003e\u003cp\u003eThe 18-9096 clip set is designed specifically for Volvo Penta SX-A and DPS-A stern drives built 2007 and newer. It is not intended for 2006-and-earlier Volvo SX drives; using it on an older drive can damage the clip. Boat owners replacing worn, cracked, or missing trailering clips, or rigging a drive for the first time, can use this set as a direct fit for the applicable Volvo Penta drives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9096\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trailering Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Quantity:\u003c\/strong\u003e 2 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drives:\u003c\/strong\u003e Volvo Penta SX-A, DPS-A (2007-Up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Volvo 3847547\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Clip-on, hex head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 7-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13.5 x 3.8 x 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282227111\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolvo Penta SX-A, DPS-A (2007-Up)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolvo 3847547\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-9096 trailering clip do?\u003c\/strong\u003e It holds a Volvo Penta SX-A or DPS-A stern drive up in the trailered position so the outdrive does not drop down while the boat is being towed or stored, and it comes as a set of 2 clips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-9096 clip fit an older Volvo SX drive from 2005 or 2006?\u003c\/strong\u003e No. The 18-9096 set is designed only for Volvo Penta SX-A and DPS-A drives from 2007 and newer; using it on a 2006-or-earlier drive is not correct and can damage the clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9096 a direct replacement for the OEM Volvo Penta part?\u003c\/strong\u003e Yes, 18-9096 is a direct interchange for Volvo Penta OEM part 3847547 and is built to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clips come in the 18-9096 package?\u003c\/strong\u003e The package is a set of 2 trailering clips, which is the quantity needed for a Volvo Penta SX-A or DPS-A drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the 18-9096 trailering clips made from?\u003c\/strong\u003e The clips are made of plastic with a white finish and use a clip-on, hex-head fastener design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-9096 trailering clip?\u003c\/strong\u003e Each individual clip is 7-1\/4 inch long, and the retail package measures 13.5 x 3.8 x 1.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-9096 trailering clip set weigh?\u003c\/strong\u003e The set weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drive models is the 18-9096 clip designed for?\u003c\/strong\u003e It is designed for Volvo Penta SX-A and DPS-A stern drives, specifically the 2007-and-newer versions of those drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-9096 clip color-specific or does it need painting?\u003c\/strong\u003e The 18-9096 clip is supplied finished in white and does not require additional painting for use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan 18-9096 be installed without removing the drive unit?\u003c\/strong\u003e The clip is a clip-on style fastener that attaches to the Volvo Penta SX-A\/DPS-A drive unit; no additional detail beyond its clip-on, hex-head design is specified for this part.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436201691,"sku":"SIE-18-9096","price":33.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-9096_lg__68218.1558133835.500.750.jpg?v=1785188812"},{"product_id":"sea-dog-751030-1-two-piece-coupler-lock-brass-plated-zinc-includes-2-keys-fits-most-trailer-couplers","title":"Sea-Dog 751030-1 Two-Piece Trailer Coupler Lock, Brass Plated Zinc","description":"\u003cp\u003eThe Sea-Dog 751030-1 Two-Piece Coupler Lock is built for theft deterrence on a boat or utility trailer, adding a level of security that also prevents accidental uncoupling while in transit. The two-piece design gives better access in hard-to-reach places compared to a single-body lock, making it easier to fit and remove even in tight mounting locations. It fits most coupler sizes and comes with two keys so a spare is always on hand. The lock body is constructed of corrosion resistant brass plated zinc, giving it durability for outdoor and marine trailer use where exposure to moisture and road grime is constant.\u003c\/p\u003e\u003cp\u003eBeyond theft prevention, this coupler lock provides peace of mind during towing by helping keep the coupler securely engaged, reducing the risk of the trailer separating from the tow vehicle unintentionally. Its compact dimensions allow it to work with common coupler configurations without adding excessive bulk.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 751030-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass Plated Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-Piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two Keys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514751063\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Locks and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 751030-1 used for?\u003c\/strong\u003e It is a two-piece coupler lock designed for theft deterrence on a trailer coupler, while also adding a level of security that helps prevent accidental uncoupling while in transit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with the 751030-1 coupler lock?\u003c\/strong\u003e Two keys are included with the Sea-Dog 751030-1, so you have a spare on hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the coupler lock made of?\u003c\/strong\u003e The Sea-Dog 751030-1 is constructed of corrosion resistant brass plated zinc, which holds up well to outdoor and marine trailer exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lock fit my trailer coupler?\u003c\/strong\u003e The 751030-1 fits most coupler sizes thanks to its two-piece design, which also gives better access in hard-to-reach mounting spots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the two-piece design an advantage over a one-piece coupler lock?\u003c\/strong\u003e Splitting the lock into two pieces makes it easier to install and access in tight or hard-to-reach areas around the coupler compared to a single solid-body lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 751030-1?\u003c\/strong\u003e The lock measures 1-11\/16 inches (A), 1-13\/16 inches (B), 3\/4 inch (C), and 9\/16 inch (D) across its key mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 751030-1 coupler lock weigh?\u003c\/strong\u003e The Sea-Dog 751030-1 weighs 0.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 751030-1 rust resistant?\u003c\/strong\u003e Yes, its brass plated zinc construction is corrosion resistant, making it suitable for boat trailer and marine towing environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the coupler lock help prevent accidental uncoupling?\u003c\/strong\u003e Yes, in addition to theft deterrence, the Sea-Dog 751030-1 adds security that helps prevent the coupler from accidentally releasing while towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 751030-1 coupler lock?\u003c\/strong\u003e The UPC for the Sea-Dog 751030-1 Two-Piece Coupler Lock is 035514751063.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988828303579,"sku":"S-D-751030-1","price":10.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7186.jpg?v=1784429968"},{"product_id":"sea-dog-751010-1-square-trailer-coupler-locking-pin-1-4-in-electro-galvanized-steel","title":"Sea-Dog Coupler Pin 751010-1, 1\/4 Inch Square Trailer Coupler Locking Pin, Electro-Galvanized Steel","description":"\u003cp\u003eThe Sea-Dog 751010-1 is a square coupler locking pin built to secure your trailer coupler and prevent accidental uncoupling while in transit. Constructed of electro-galvanized steel, it resists corrosion from road spray, launch ramps, and general outdoor exposure, making it well suited to boat trailers and other towed equipment stored near water. The pin uses a snap lock bale that is spring tensioned, giving it stronger holding power than a simple friction-fit pin so it stays seated over rough roads and repeated hitching cycles.\u003c\/p\u003e\u003cp\u003eSized at 1\/4 inch, the 751010-1 is designed to fit most coupler sizes, making it a straightforward upgrade or replacement for a worn, bent, or missing coupler pin. It ships as a single pin and is a simple, tool-free installation: insert the pin through the coupler latch and snap the spring-loaded bale closed to lock it in place. Because it is sold individually, it is easy to keep a spare on hand or to replace just the one pin that has failed rather than an entire coupler lock assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 751010-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Electro-Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter (A):\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (B):\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.106 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514751025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00035514751025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Fitment:\u003c\/strong\u003e Fits most coupler sizes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most trailer coupler sizes at the 1\/4 inch pin size; no specific make, model, or year fitment is specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 751010-1 coupler pin?\u003c\/strong\u003e The Sea-Dog 751010-1 is a 1\/4 inch square coupler locking pin, with an overall length of 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 751010-1 pin made of?\u003c\/strong\u003e It is made of electro-galvanized steel, which provides corrosion resistance for outdoor and marine trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pin fit my trailer coupler?\u003c\/strong\u003e The 751010-1 is designed to fit most coupler sizes at the 1\/4 inch pin diameter; check your coupler's latch opening against the 1\/4 inch pin size before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the locking mechanism work?\u003c\/strong\u003e A spring-tensioned snap lock bale holds the 751010-1 pin in place once inserted, giving it stronger holding power than a plain friction pin and helping prevent accidental uncoupling in transit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pins come in a package?\u003c\/strong\u003e The Sea-Dog 751010-1 is sold as a single coupler pin, one piece per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 751010-1 weigh?\u003c\/strong\u003e The pin weighs 0.106 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation tool-free?\u003c\/strong\u003e Yes, installation is tool-free: insert the pin through the coupler latch and snap the spring-loaded bale closed to lock it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger size available?\u003c\/strong\u003e Sea-Dog offers a related coupler pin, part number 751011-1, at 5\/16 inch, which is a separate SKU from the 1\/4 inch 751010-1 pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Sea-Dog 751010-1 coupler pin is 035514751025.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pin resist rust?\u003c\/strong\u003e Yes, the electro-galvanized steel construction of the 751010-1 is built to resist corrosion in wet and outdoor trailering conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does dimension C, D, and E refer to on this pin?\u003c\/strong\u003e For the 751010-1, dimension C measures 1-13\/16 inches, dimension D measures 7\/16 inch, and dimension E measures 13\/16 inch, describing the pin's additional body and bale dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this pin as a replacement for a lost or broken coupler pin?\u003c\/strong\u003e Yes, the 751010-1 is intended as a direct replacement coupler pin for coupler locks that use a 1\/4 inch square pin.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988828565723,"sku":"S-D-751010-1","price":3.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5418.jpg?v=1784429976"},{"product_id":"attwood-11126-4-fold-up-trailer-jack-1-500-lb-capacity-dual-wheels-26-inch-lift-fits-3-x-5-inch-tongue","title":"Attwood 11126-4 Fold-Up Trailer Jack, 1500-Pound Capacity, Dual Wheel, Fits 3 Inch x 5 Inch Tongue","description":"\u003cp\u003eThe Attwood 11126-4 is a fold-up trailer jack built to support and lift a trailer tongue during hitching, loading, unloading, and storage. It mounts directly to a 3 inch x 5 inch trailer tongue and uses an adjustable mount and swivel system that lets it pivot down into working position to bear the tongue's weight, or swivel up and lock into place out of the way for towing. A sidewind handle drives the lifting mechanism, making it easy to raise and lower the jack by hand without excessive effort.\u003c\/p\u003e\u003cp\u003eConstruction is corrosion-resistant, zinc-plated steel tubing, chosen for strength and long-term stability under load. The jack rides on dual wheels at its base, which make it easier to reposition the trailer tongue by hand when the jack is lowered. Rated capacity is 1500 pounds, with 12 inches of travel and 26 inches of total lift, giving enough range to raise or lower the tongue to match a hitch height or to level a trailer for storage.\u003c\/p\u003e\u003cp\u003eThis jack fits trailers with a 3 inch x 5 inch tongue and is intended as a direct fit for that mounting pattern rather than a universal clamp-on unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11126-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheels:\u003c\/strong\u003e Dual wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Size:\u003c\/strong\u003e Fits 3 inch x 5 inch tongue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Type:\u003c\/strong\u003e Sidewind handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 3.5 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697111265\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTrailers with a 3 inch x 5 inch tongue\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer tongue does the Attwood 11126-4 fit?\u003c\/strong\u003e The Attwood 11126-4 mounts on a 3 inch x 5 inch trailer tongue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this trailer jack support?\u003c\/strong\u003e The 11126-4 has a rated capacity of 1500 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much travel and lift does the 11126-4 provide?\u003c\/strong\u003e It offers 12 inches of travel and 26 inches of total lift, enough range to match most hitch heights or level a trailer in storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack have one wheel or two?\u003c\/strong\u003e The Attwood 11126-4 rides on dual wheels at its base, making it easier to move the trailer tongue by hand when lowered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the trailer jack made of?\u003c\/strong\u003e The 11126-4 is built from corrosion-resistant, zinc-plated steel tubing for strength and long-term stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the jack be folded up for towing?\u003c\/strong\u003e Yes, the 11126-4 swivels up and locks into place for transport, then pivots down again to support the tongue for loading, unloading, or storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you raise and lower the Attwood 11126-4?\u003c\/strong\u003e It uses a sidewind handle, which turns to raise or lower the jack without needing to remove it from the tongue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 11126-4 weigh?\u003c\/strong\u003e The trailer jack weighs 18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11126-4 trailer jack?\u003c\/strong\u003e Item dimensions for the Attwood 11126-4 are 6 x 3.5 x 6 inches, with a minimum height of 12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11126-4 a permanent or removable mount?\u003c\/strong\u003e The 11126-4 uses an adjustable mount and swivel system on the tongue, allowing it to swivel up out of the way for towing rather than requiring removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 11126-4 trailer jack?\u003c\/strong\u003e The UPC for the Attwood 11126-4 is 022697111265.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663559899,"sku":"ATT-11126-4","price":88.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/718T9MQjngL.jpg?v=1784486390"},{"product_id":"attwood-10108-lock-n-stow-motor-lock-for-mercury-135-150-175-optimax-75-200-hp-efi-outboards-steel-trailering-support","title":"Attwood 10108 Lock N' Stow Outboard Motor Trailering Lock - Fits Mercury 135, 150, 175 OptiMax and 75-200 HP EFI Engines","description":"\u003cp\u003eThe Attwood 10108 Lock N' Stow is a trailering lock that secures an outboard motor in a forward position while towing, greatly reducing the risk of road shock damaging the engine. Unlike devices that tie the engine's lower unit directly to the trailer, the Lock N' Stow does not restrain the lower unit, which eliminates scuff marks on the engine and trailer and removes the risk of excessive pressure being placed on hydraulic seals during transport.\u003c\/p\u003e\u003cp\u003eConstruction is black powder-coated steel for corrosion resistance and durability, paired with stainless steel pins for long-term reliability in marine environments. The compact design allows the lock to be stored easily in nearly any boat compartment when not in use, so it is always on hand before towing. It is recommended for use in salt water applications and is built to handle outboard engines up to 200 horsepower.\u003c\/p\u003e\u003cp\u003eThe Attwood 10108 is designed to fit Mercury 135 OptiMax, 150 OptiMax, and 175 OptiMax outboards, as well as Mercury 75 HP to 200 HP EFI outboard motors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Lock N' Stow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black powder-coated steel with stainless steel pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black powder-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower:\u003c\/strong\u003e 200 horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014599101086\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00014599101086\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 135 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 150 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 175 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 75 HP to 200 HP EFI outboard engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 10108 Lock N' Stow do?\u003c\/strong\u003e The Attwood 10108 Lock N' Stow securely locks an outboard motor in a forward position during trailering, which greatly reduces the risk of road shock damaging the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboard engines fit the Attwood 10108?\u003c\/strong\u003e The Attwood 10108 fits Mercury 135 OptiMax, 150 OptiMax, and 175 OptiMax outboards, as well as Mercury 75 HP to 200 HP EFI outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lock N' Stow tie the outboard's lower unit to the trailer?\u003c\/strong\u003e No. The Attwood 10108 does not tie the engine's lower unit to the trailer as some other locking devices do, which eliminates scuff marks and removes the risk of excessive pressure on hydraulic seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 10108 made of?\u003c\/strong\u003e The Lock N' Stow is made of black powder-coated steel with stainless steel pins for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 10108 weigh?\u003c\/strong\u003e The Attwood 10108 Lock N' Stow weighs 4.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 10108 Lock N' Stow suitable for saltwater use?\u003c\/strong\u003e Yes, the Attwood 10108 is recommended for use in salt water applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Lock N' Stow be stored on the boat?\u003c\/strong\u003e Yes, the compact design of the Attwood 10108 allows it to be stored easily in nearly any boat compartment when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the Attwood 10108?\u003c\/strong\u003e The Attwood 10108 Lock N' Stow is rated for outboard engines up to 200 horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 10108 help protect hydraulic seals during trailering?\u003c\/strong\u003e Yes, because the Lock N' Stow does not restrain the lower unit to the trailer, it prevents the risk of excessive pressure being placed on the engine's hydraulic seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the pins on the Attwood 10108 made of?\u003c\/strong\u003e The Attwood 10108 Lock N' Stow uses stainless steel pins.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663789275,"sku":"ATT-10108","price":138.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-10108_large__11272.1558177157.500.750.jpg?v=1785188051"},{"product_id":"attwood-11127-4-fold-up-trailer-jack-1-000-lb-capacity-24-inch-lift-10-inch-travel-single-wheel-fits-3-x-5-inch-tongue","title":"Attwood 11127-4 Fold-Up Trailer Jack, 1,000-Pound Capacity, 10-Inch Travel, 24-Inch Lift, Single Wheel","description":"\u003cp\u003eThe Attwood 11127-4 Fold-Up Trailer Jack provides stable, reliable lifting and lowering of a trailer tongue for loading, unloading, launching, and storage. It is built from corrosion-resistant, zinc-plated steel tubing for strength and durability in wet marine and towing environments. The adjustable mount and swivel system lets the jack pivot down to support the trailer tongue when in use, then swivel up and lock into place for clear road transport. A sidewind handle operates the lift mechanism, making it easy to raise and lower the trailer tongue by hand without straining.\u003c\/p\u003e\u003cp\u003eThis jack mounts on a standard 3-inch x 5-inch trailer tongue and rides on a single wheel at its base, so it can be rolled into position rather than dragged or lifted into place. It offers 10 inches of travel and 24 inches of total lift, with a 1,000-pound load capacity, making it suited to smaller and mid-size boat trailers. The fold-up design keeps the jack out of the way during towing while remaining quick to deploy at the ramp or in the driveway.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11127-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fold-Up Trailer Jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheels:\u003c\/strong\u003e 1 (single wheel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Size:\u003c\/strong\u003e 3-inch x 5-inch trailer tongue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Type:\u003c\/strong\u003e Sidewind handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.91 x 2.36 x 21.65 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697111272\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Attwood 11127-4 trailer jack?\u003c\/strong\u003e The Attwood 11127-4 Fold-Up Trailer Jack has a 1,000-pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much travel and lift does this trailer jack offer?\u003c\/strong\u003e It provides 10 inches of travel and 24 inches of total lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer tongue does the 11127-4 fit?\u003c\/strong\u003e It mounts on a standard 3-inch x 5-inch trailer tongue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wheels does the Attwood 11127-4 have?\u003c\/strong\u003e This model has a single wheel at its base to support rolling the jack into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 11127-4 trailer jack made from?\u003c\/strong\u003e It is constructed from corrosion-resistant, zinc-plated steel tubing for strength and durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the handle work on this trailer jack?\u003c\/strong\u003e A sidewind handle is used to raise and lower the jack, making the lifting motion easier to control by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the jack be folded up for towing?\u003c\/strong\u003e Yes, the Attwood 11127-4 swivels up and locks into place for transport, then pivots down to support the tongue when loading, unloading, or in storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 11127-4 trailer jack weigh?\u003c\/strong\u003e The trailer jack weighs 14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the packaged jack?\u003c\/strong\u003e The Attwood 11127-4 measures 5.91 x 2.36 x 21.65 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 11127-4 suited for saltwater and towing environments?\u003c\/strong\u003e Yes, its zinc-plated steel tubing is corrosion-resistant, which suits the repeated exposure to water and road conditions common with boat trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 11127-4 trailer jack?\u003c\/strong\u003e The UPC for the Attwood 11127-4 Fold-Up Trailer Jack is 022697111272.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663887579,"sku":"ATT-11127-4","price":69.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71oRHBOXv6L.jpg?v=1784486407"},{"product_id":"attwood-10107-lock-n-stow-outboard-motor-support-fits-mercury-200-255-optimax-and-225-250-hp-efi-trailering-lock","title":"Attwood 10107 Lock N' Stow Outboard Trailering Lock, Fits Mercury 200 OptiMax, 255 OptiMax, 225 EFI, 250 EFI","description":"\u003cp\u003eThe Attwood 10107 Lock N' Stow secures an outboard motor in a forward position during trailering, greatly reducing the risk of road shock damaging the engine. Unlike devices that tie the engine's lower unit directly to the trailer, the Lock N' Stow does not, so it eliminates scuff marks on the boat or trailer finish and avoids placing excessive pressure on the engine's hydraulic seals. The lock is built with an aluminum body finished in a black powder coat for corrosion resistance, and uses stainless steel pins for long-term durability, including in salt water use. Its compact design allows it to be stored easily in nearly any boat compartment when not in use. The Attwood 10107 is sized for larger outboards and fits Mercury 200 OptiMax, 255 OptiMax, 225-HP EFI, and 250-HP EFI engines, making it a practical trailering accessory for boat owners running these Mercury outboard models.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Mercury 200 OptiMax, 255 OptiMax, 225 EFI, 250 EFI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower:\u003c\/strong\u003e 250 Horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black powder-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.308 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014599101079\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 200 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 255 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 225-HP EFI\u003c\/li\u003e\n\u003cli\u003eMercury 250-HP EFI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard engines does the Attwood 10107 fit?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow fits Mercury 200 OptiMax, 255 OptiMax, 225-HP EFI, and 250-HP EFI outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lock N' Stow actually do?\u003c\/strong\u003e It locks an outboard motor in a forward position during trailering, which greatly reduces the risk of road shock damaging the engine while the boat is being towed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 10107 tie the engine's lower unit to the trailer?\u003c\/strong\u003e No. Unlike some trailering devices, the Attwood 10107 Lock N' Stow does not tie the lower unit to the trailer, which eliminates scuff marks on the boat or trailer finish and avoids excessive pressure on the engine's hydraulic seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 10107 made of?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow has an aluminum body with a black powder-coated finish, and its pins are stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 10107 weigh?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow weighs 4.308 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 10107 suitable for salt water use?\u003c\/strong\u003e Yes, the Attwood 10107 Lock N' Stow is recommended for salt water use thanks to its corrosion-resistant aluminum body and stainless steel pins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Attwood 10107 be used with lower horsepower Mercury engines?\u003c\/strong\u003e No. The Attwood 10107 is designed for Mercury 200 OptiMax, 255 OptiMax, 225-HP EFI, and 250-HP EFI engines; a separate part, the Attwood 10108, covers Mercury 135 OptiMax, 150 OptiMax, 175 OptiMax, and 75-HP to 200-HP EFI engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 10107 operated?\u003c\/strong\u003e The Lock N' Stow is a manually operated engine mount device, requiring no electrical or hydraulic power to lock the outboard in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Attwood 10107 stored when not in use?\u003c\/strong\u003e Its compact design lets the Lock N' Stow be stored easily in nearly any boat compartment when it is not securing the outboard for trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the Attwood 10107?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow is rated for outboards up to 250 horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 10107 replace tie-down straps?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow serves a different function than transom tie-down straps: it locks the outboard engine itself in a forward position, while tie-down straps secure the boat to the trailer at the transom eyes.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663920347,"sku":"ATT-10107","price":149.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-10107_large__16486.1558177101.500.750.jpg?v=1785189136"},{"product_id":"grade-8-hex-cap-screw-7-16-20-x-2-63-in-zinc-plated-short-thread-trailer-bolt-mpn-007-380-00","title":"Dexter Hex Cap Screw 7\/16-20 x 2.63 Inch, Grade 8, Zinc Plated, Short Thread, Part 007-380-00","description":"\u003cp\u003eThis is a Grade 8 hex cap screw from Dexter, part number 007-380-00, sized 7\/16-20 x 2.63 inches with a short thread length. It is built for trailer brake actuator hardware applications where a high-strength fastener is required to secure components under repeated load and vibration. The 7\/16-20 designation indicates a 7\/16 inch diameter fastener with 20 threads per inch (a fine thread pitch), and the 2.63 inch overall length with short thread run is sized specifically for actuator mounting hardware rather than general-purpose use. Grade 8 steel construction gives this screw a higher tensile strength rating than standard Grade 2 or Grade 5 hardware, making it suitable for structural and safety-critical fastening points such as brake actuator assemblies. The zinc plating provides a protective finish against corrosion and rust, which is important given the exposure to moisture, road spray, and general outdoor conditions trailers experience. The hex cap head allows the screw to be driven and torqued with a standard wrench or socket. This fastener is sold as a genuine Dexter part and is intended as a direct replacement or maintenance part for trailer brake actuator assemblies that use this size and grade of hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 007-380-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hex Cap Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 7\/16-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Short thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Type:\u003c\/strong\u003e Hex cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151233900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trailer brake actuator hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter 007-380-00 hex cap screw?\u003c\/strong\u003e The Dexter 007-380-00 is a 7\/16-20 hex cap screw, meaning it has a 7\/16 inch diameter with 20 threads per inch, and it measures 2.63 inches in overall length with a short thread run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fastener Grade 8?\u003c\/strong\u003e Yes, part number 007-380-00 is a Grade 8 hex cap screw, which carries a higher tensile strength rating than standard Grade 2 or Grade 5 hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this screw have?\u003c\/strong\u003e It has a zinc plated finish, which protects the Grade 8 steel fastener against corrosion from moisture and road exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this screw used for?\u003c\/strong\u003e Dexter 007-380-00 is used as trailer brake actuator hardware, securing components within brake actuator assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The 007-380-00 hex cap screw weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a short thread or full thread screw?\u003c\/strong\u003e Part 007-380-00 has a short thread design, with the threaded portion covering less than the full shank length, which is typical for actuator mounting applications rather than general hardware use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, 007-380-00 is a genuine Dexter part, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install this screw?\u003c\/strong\u003e The hex cap head on the 007-380-00 screw is designed to be driven with a standard wrench or socket sized to fit a 7\/16 inch hex cap fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 007-380-00 screw made from?\u003c\/strong\u003e This fastener is made from Grade 8 steel, chosen for its high strength in load-bearing brake actuator hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this screw be used for general hardware repairs, or is it actuator-specific?\u003c\/strong\u003e The 007-380-00 is sized and threaded specifically for trailer brake actuator hardware applications, so it should be matched to that use rather than substituted into unrelated general-purpose fastening jobs.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256379611,"sku":"DEX-007-380-00","price":4.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-2339000_lg__56231.1558140822.500.750.jpg?v=1785329084"},{"product_id":"dexter-007-126-01-trailer-suspension-shackle-bolt-7-16-20-x-2-90-in-zinc-plated-shoulder-bolt","title":"Dexter Shackle Bolt 007-126-01, 7\/16-20 x 2.90 Inch, 9\/16 Inch Body, Zinc Plated","description":"\u003cp\u003eThe Dexter Shackle Bolt 007-126-01 is a zinc plated shoulder bolt designed for trailer leaf spring shackle assemblies. It secures the shackle link to the spring hanger or equalizer, allowing the leaf spring to pivot as the axle moves through its suspension travel. The bolt features a 7\/16-20 thread, a 2.90 inch length, and a 9\/16 inch diameter shoulder body that fits through the shackle and spring eye bushings to provide a precise, low-wear pivot point.\u003c\/p\u003e\u003cp\u003eThe zinc finish resists corrosion in the wet, road-spray environment trailer suspension hardware is regularly exposed to, helping the bolt hold up against rust over repeated use. Because this is a shoulder bolt rather than a standard fully-threaded bolt, the smooth 9\/16 inch body diameter section reduces slop at the pivot point compared to using a generic hardware-store bolt, which helps keep the shackle assembly tight and reduces premature bushing wear.\u003c\/p\u003e\u003cp\u003eThis shackle bolt is sold as an individual replacement fastener for rebuilding or servicing a trailer leaf spring shackle. It is intended for use with shackles and hanger brackets sized for a 7\/16 inch bolt with a 9\/16 inch body diameter.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 007-126-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shackle Bolt (shoulder bolt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 7\/16-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 2.90 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327605119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer suspension hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 007-126-01 shackle bolt used for?\u003c\/strong\u003e It is a shoulder bolt used to secure a trailer leaf spring shackle to the spring hanger or equalizer, forming the pivot point for the shackle as the suspension moves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this shackle bolt use?\u003c\/strong\u003e The 007-126-01 shackle bolt has a 7\/16-20 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Dexter 007-126-01 shackle bolt?\u003c\/strong\u003e It measures 2.90 inches in overall length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the body diameter of this bolt?\u003c\/strong\u003e The shoulder (body) section of the 007-126-01 bolt is 9\/16 inch in diameter, which is the section that rides inside the shackle and spring eye bushings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 007-126-01 shackle bolt have?\u003c\/strong\u003e It has a zinc plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this shackle bolt weigh?\u003c\/strong\u003e The Dexter 007-126-01 shackle bolt weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bolt genuine Dexter hardware or an aftermarket copy?\u003c\/strong\u003e Part number 007-126-01 is a genuine Dexter shackle bolt, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bolt come with a locknut?\u003c\/strong\u003e This listing is for the 007-126-01 shackle bolt itself; a matching locknut is a separate component and not included in this bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a standard hardware-store bolt instead of the 007-126-01?\u003c\/strong\u003e A generic fully-threaded bolt lacks the 9\/16 inch smooth shoulder body of the 007-126-01, which is what keeps the shackle pivot tight, so using a non-shoulder bolt can lead to looseness and faster bushing wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer hardware is the 007-126-01 designed for?\u003c\/strong\u003e It is designed for trailer leaf spring shackle assemblies, connecting the shackle link to the spring hanger or equalizer.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256740059,"sku":"DEX-007-126-01","price":2.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_007-126-01_Bolt_Shoulder_7-16-20x2.90_9-16_Body_Zinc_Shackle__31957.1741883596.500.750.jpg?v=1785329091"},{"product_id":"dexter-hand-wheel-lock-068-088-00-model-60-plated-coupler-lock","title":"Dexter Multi-Fit Hand Wheel Lock, Model 60, Plated Finish","description":"\u003cp\u003eThe Dexter Multi-Fit Hand Wheel Lock, Model 60, is a plated hand wheel lock designed to secure a trailer coupler's hand wheel against unauthorized use. Its multi-fit design allows it to work across a range of trailer coupler hand wheels rather than a single fixed size, making it a practical choice for trailer owners who want a straightforward, no-frills locking accessory. The plated finish is intended to help the lock resist the elements typical of trailer and towing environments.\u003c\/p\u003e\u003cp\u003eThis is a lightweight, compact accessory at just 0.01 pounds, sized to mount directly onto the hand wheel of a compatible trailer coupler without adding meaningful bulk or weight to the tow setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-088-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Multi-Fit (fits multiple hand wheel couplers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Multi-Fit Hand Wheel Lock used for?\u003c\/strong\u003e It is a hand wheel lock, Dexter part number 068-088-00, designed to secure a trailer coupler's hand wheel against unauthorized use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lock made to fit only one trailer coupler model?\u003c\/strong\u003e No, the Dexter 068-088-00 is a Multi-Fit design, meaning it is made to work across multiple trailer coupler hand wheels rather than a single specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Dexter Model 60 hand wheel lock have?\u003c\/strong\u003e The Dexter 068-088-00 hand wheel lock has a plated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-088-00 hand wheel lock weigh?\u003c\/strong\u003e It weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat model number is this Dexter hand wheel lock?\u003c\/strong\u003e This hand wheel lock is Dexter's Model 60, part number 068-088-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter Multi-Fit Hand Wheel Lock a genuine Dexter part?\u003c\/strong\u003e Yes, part number 068-088-00 is a genuine Dexter Model 60 hand wheel lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the Dexter 068-088-00 hand wheel lock mount?\u003c\/strong\u003e It mounts onto the hand wheel of a compatible trailer coupler to lock it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 068-088-00?\u003c\/strong\u003e Part number 068-088-00 is manufactured by Dexter.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257919707,"sku":"DEX-068-088-00","price":2.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-088-00__48599.1780061499.500.750.jpg?v=1785329089"},{"product_id":"leverlock-handle-assembly-with-lanyard-mpn-068-143-00","title":"Dexter Leverlock Handle Assembly with Lanyard 068-143-00","description":"\u003cp\u003eThe Dexter Leverlock Handle Assembly, part number 068-143-00, is the handle component used to operate a Dexter leverlock mechanism. The assembly comes complete with a lanyard attached to the handle, keeping it tethered and preventing loss during use. This is a genuine Dexter replacement part, sold as a direct-fit assembly for the leverlock hardware it is designed for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-143-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Lanyard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter part number for this leverlock handle assembly?\u003c\/strong\u003e The part number is 068-143-00, and it is a genuine Dexter handle assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter Leverlock Handle Assembly 068-143-00 include a lanyard?\u003c\/strong\u003e Yes, this handle assembly comes with a lanyard attached, so the handle stays tethered in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter Leverlock Handle Assembly weigh?\u003c\/strong\u003e It weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 068-143-00 a genuine Dexter part or an aftermarket copy?\u003c\/strong\u003e Part number 068-143-00 is a genuine Dexter Leverlock Handle Assembly, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the handle in this Dexter assembly connect to?\u003c\/strong\u003e It is the handle component of a Dexter leverlock mechanism, used to operate the leverlock hardware it is installed on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 068-143-00?\u003c\/strong\u003e The Dexter Leverlock Handle Assembly 068-143-00 includes the handle assembly and its attached lanyard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the 068-143-00 handle assembly?\u003c\/strong\u003e Dexter manufactures this leverlock handle assembly, part number 068-143-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the lanyard on the 068-143-00 handle assembly be replaced separately?\u003c\/strong\u003e The lanyard ships attached to the Dexter 068-143-00 handle assembly as a complete unit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258018011,"sku":"DEX-068-143-00","price":74.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-143-00_2__47175.1780061499.500.750.jpg?v=1785329087"},{"product_id":"roller-for-model-60-replacement-roller-mpn-068-347-00","title":"Dexter Roller for Model 60, Part 068-347-00","description":"\u003cp\u003eThe Dexter Roller (part number 068-347-00) is a replacement roller designed for use with Dexter Model 60. It is offered as a genuine Dexter component for buyers who need to replace a worn or damaged roller on their Model 60 unit rather than sourcing a generic substitute. Using the correct manufacturer part number helps ensure the roller matches the fit and function of the original equipment it is replacing.\u003c\/p\u003e\u003cp\u003eThis roller is a lightweight, compact component at 0.1 pounds, consistent with a small internal or mechanical part rather than a structural piece. Because it is sold under the Dexter brand and identified by its own dedicated part number, it can be ordered with confidence that it corresponds to the Model 60 application it is listed for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-347-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Model:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter Model 60\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Dexter part number 068-347-00?\u003c\/strong\u003e 068-347-00 is the Dexter manufacturer part number for a roller designed for use with Dexter Model 60.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this roller a genuine Dexter part?\u003c\/strong\u003e Yes, roller 068-347-00 is a genuine Dexter component, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does roller 068-347-00 weigh?\u003c\/strong\u003e This Dexter roller weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this roller used with?\u003c\/strong\u003e Roller 068-347-00 is used with Dexter Model 60.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure I am ordering the correct roller?\u003c\/strong\u003e Confirm the part number 068-347-00 and that your unit is a Dexter Model 60 before ordering, since Dexter uses distinct part numbers for different models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the Dexter branded roller instead of a generic one?\u003c\/strong\u003e The Dexter roller, part 068-347-00, is manufactured by Dexter specifically for the Model 60, which helps ensure correct fit compared to an unbranded generic roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs roller 068-347-00 a replacement part?\u003c\/strong\u003e Yes, 068-347-00 is sold as a replacement roller for Dexter Model 60.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the roller come as a single piece?\u003c\/strong\u003e Roller 068-347-00 is listed and sold as a single roller component under its own Dexter part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258083547,"sku":"DEX-068-347-00","price":1.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-347-00__31509.1780061499.500.750.jpg?v=1785329090"},{"product_id":"2-in-ball-coupler-lock-plate-mpn-074-339-00-trailer-coupler-replacement-part","title":"Dexter 2 Ball Coupler Lock Plate, Part Number 074-339-00, Trailer Coupler Locking Plate","description":"\u003cp\u003eThe Dexter 2 Ball Coupler Lock Plate, part number 074-339-00, is a replacement locking plate for Dexter 2 ball trailer couplers. This plate is the component inside the coupler body that engages the trailer ball and secures the coupler in the locked position, keeping the trailer connected to the tow vehicle during transport. As a genuine Dexter part, it is manufactured to match the fit and function of the original plate it replaces, making it a straightforward swap when a coupler's lock plate is worn, bent, or no longer securing properly.\u003c\/p\u003e\u003cp\u003eThis lock plate is sized specifically for 2 ball couplers, so it should be matched to a coupler built for that ball size rather than used on a 2-5\/16 inch or 1-7\/8 inch coupler. Replacing a worn lock plate restores proper clamping engagement on the trailer ball, which is important for keeping the coupler latched securely while towing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 074-339-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 2 Ball Coupler Lock Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Size Compatibility:\u003c\/strong\u003e 2 inch coupler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 074-339-00 lock plate used for?\u003c\/strong\u003e It is the locking plate inside a Dexter 2 ball trailer coupler that engages the trailer ball and holds the coupler in the latched position, keeping the trailer secured to the tow vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lock plate fit a 2-5\/16 inch coupler?\u003c\/strong\u003e No, part number 074-339-00 is sized for 2 ball couplers only and is not intended for 2-5\/16 inch or 1-7\/8 inch coupler sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 074-339-00 plate a genuine Dexter part?\u003c\/strong\u003e Yes, this lock plate is a genuine Dexter component, part number 074-339-00, made to match the original equipment fit inside Dexter 2 ball couplers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 074-339-00 lock plate weigh?\u003c\/strong\u003e This lock plate weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace my coupler lock plate?\u003c\/strong\u003e A coupler lock plate like the Dexter 074-339-00 should be replaced when it is worn, bent, or no longer engaging the trailer ball tightly enough to keep the coupler securely latched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the 074-339-00?\u003c\/strong\u003e The Dexter 074-339-00 is listed under trailer brake actuator hardware, as it is a component of the trailer coupler assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 074-339-00 lock plate come with mounting hardware?\u003c\/strong\u003e The listing for part number 074-339-00 covers the lock plate itself; no additional hardware is specified as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the Dexter 074-339-00 lock plate myself?\u003c\/strong\u003e The 074-339-00 lock plate is a direct-fit replacement component designed to swap into place inside a compatible Dexter 2 ball coupler.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258607835,"sku":"DEX-074-339-00","price":3.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-1809000_lg__20399.1558140628.500.750.jpg?v=1785329080"},{"product_id":"dexter-2-5-16-in-adjustable-channel-mount-trailer-coupler-2-hole-painted-074-340-00","title":"Dexter 2 5\/16 Inch Adjustable Trailer Coupler, 2-Hole, Painted, Part 074-340-00","description":"\u003cp\u003eThis Dexter adjustable trailer coupler is built around a 2 5\/16 inch ball size and mounts using a 2-hole bolt pattern, making it a common choice for boat and utility trailer tongues that need height adjustment to match the tow vehicle's hitch. The adjustable design lets the coupler height be set to level the trailer for towing, which helps keep the trailer tracking correctly and reduces uneven wear on the coupler and ball. The coupler carries a painted finish for corrosion resistance during outdoor storage and highway use.\u003c\/p\u003e\u003cp\u003eBecause it uses a 2-hole mounting pattern, this coupler is intended to bolt directly to a trailer tongue that is already drilled for that pattern, or to a channel\/A-frame tongue during a coupler swap. At 9 pounds, it is a solid, standard-duty coupler assembly. Part number 074-340-00 identifies this specific Dexter coupler for ordering and cross-checking against your trailer's existing coupler.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 074-340-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Ball Size:\u003c\/strong\u003e 2 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Style:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e 2-hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat ball size does this Dexter coupler use?\u003c\/strong\u003e The Dexter 074-340-00 coupler is sized for a 2 5\/16 inch trailer ball.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the coupler height adjustable?\u003c\/strong\u003e Yes, this is an adjustable coupler, so the height can be set to level the trailer with the tow vehicle's hitch before towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this coupler mount to the trailer tongue?\u003c\/strong\u003e It bolts on using a 2-hole mounting pattern, part number 074-340-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this coupler weigh?\u003c\/strong\u003e The Dexter 074-340-00 adjustable coupler weighs 9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the coupler have?\u003c\/strong\u003e This coupler has a painted finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part 074-340-00 is a genuine Dexter adjustable trailer coupler, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this coupler fit any trailer tongue?\u003c\/strong\u003e It is designed for tongues drilled for a 2-hole mounting pattern; the tongue holes need to match this pattern for a direct bolt-on fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this coupler be used to replace a worn or damaged coupler?\u003c\/strong\u003e Yes, the Dexter 074-340-00 is commonly used to replace a worn 2 5\/16 inch adjustable coupler with a matching 2-hole mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the coupler come with mounting hardware?\u003c\/strong\u003e The dossier for part 074-340-00 does not specify included hardware, so confirm bolt and nut requirements separately when installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this coupler and a fixed (non-adjustable) coupler?\u003c\/strong\u003e An adjustable coupler like the Dexter 074-340-00 allows the mounting height to be changed to level the trailer, while a fixed coupler has a set height with no adjustment.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258640603,"sku":"DEX-074-340-00","price":202.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-14k-2-5-16-adjustable-channel-mount-trailer-coupler-074-340-00__11060.1747363837.500.750.jpg?v=1785329079"},{"product_id":"2-5-16-in-extended-trailer-coupler-assembly-zinc-plated-dexter-074-350-00","title":"Dexter 2 5\/16 Inch Extended Trailer Coupler Assembly, Plated Finish","description":"\u003cp\u003eThe Dexter 074-350-00 is a 2 5\/16 inch extended coupler assembly with a plated finish, designed to connect a trailer frame to a tow vehicle's hitch ball. The extended design provides additional reach for trailer setups that require a longer coupler neck, and the plated finish helps protect the assembly against corrosion in everyday towing and marine trailer environments. At 13.8 pounds, this is a full coupler assembly rather than a lightweight replacement part, reflecting its solid, heavy-duty construction. This part is identified by Dexter part number 074-350-00, so use that number when ordering to ensure you receive the correct coupler for your trailer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 074-350-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Extended Coupler Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Size:\u003c\/strong\u003e 2 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hitch ball does this coupler fit?\u003c\/strong\u003e The Dexter 074-350-00 coupler assembly is sized for a 2 5\/16 inch hitch ball.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full coupler assembly or just a replacement part?\u003c\/strong\u003e This is a complete extended coupler assembly, part number 074-350-00, not an individual repair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Dexter 074-350-00 coupler have?\u003c\/strong\u003e It has a plated finish, which helps protect the coupler assembly from corrosion during towing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this coupler assembly weigh?\u003c\/strong\u003e The Dexter 074-350-00 extended coupler assembly weighs 13.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose an extended coupler instead of a standard one?\u003c\/strong\u003e An extended coupler, like the Dexter 074-350-00, provides additional neck length for trailer setups that need extra reach between the trailer frame and the hitch ball.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 074-350-00 coupler made by a trailer axle and running gear manufacturer?\u003c\/strong\u003e Yes, this coupler assembly is manufactured by Dexter, part number 074-350-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat information do I need to order the correct coupler?\u003c\/strong\u003e Confirm your required ball size and neck length; this listing is for the Dexter 074-350-00, a 2 5\/16 inch extended coupler assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this coupler assembly include mounting hardware?\u003c\/strong\u003e The listing covers the 2 5\/16 inch extended coupler assembly itself, part number 074-350-00; check with your installer on any additional mounting hardware needed for your specific trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the plated finish on this coupler be used in wet or marine trailer environments?\u003c\/strong\u003e The plated finish on the Dexter 074-350-00 is intended to resist corrosion, making it suitable for trailers that see wet or marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I reference when ordering this coupler?\u003c\/strong\u003e Reference Dexter part number 074-350-00 when ordering this 2 5\/16 inch extended coupler assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258673371,"sku":"DEX-074-350-00","price":241.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-21k-2-5-16-straight-tongue-trailer-coupler-074-350-00__30962.1747363837.500.750.jpg?v=1785329079"},{"product_id":"dexter-demountable-lunette-eye-3-machined-2-hole-bolt-on-trailer-tow-ring-galvanized-mpn-074-563-07","title":"Dexter Demountable Lunette Eye, 3 Inch, 2-Hole Machined, Galvanized","description":"\u003cp\u003eThis Dexter lunette eye is a demountable towing ring designed to bolt onto a boat trailer coupler or tongue assembly, providing the connection point between the trailer and the tow vehicle's pintle hook. The eye measures 3 inches in diameter and mounts through a 2-hole bolt pattern, making it straightforward to install or swap out without welding. It is machined for a precise, consistent fit and finished in galvanized steel to resist corrosion in the wet, salt-exposed conditions typical of boat trailer use. Because it is demountable, this lunette eye can be removed and replaced independently of the rest of the coupler assembly if it becomes worn, bent, or damaged, rather than requiring replacement of the entire tongue. At 12.5 pounds, it is a solid, heavy-duty steel component built for repeated towing loads. This part is sold as a standalone replacement lunette eye under Dexter part number 074-563-07.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 074-563-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Lunette Eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Demountable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Diameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is a demountable lunette eye used for?\u003c\/strong\u003e The Dexter demountable lunette eye (part 074-563-07) is a towing ring that mounts to a boat trailer coupler or tongue, giving the trailer its connection point to a pintle hook on the tow vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this lunette eye?\u003c\/strong\u003e This Dexter lunette eye has a 3 inch eye diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does the Dexter lunette eye have?\u003c\/strong\u003e It has a 2-hole mounting pattern for bolting to the trailer coupler assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lunette eye galvanized?\u003c\/strong\u003e Yes, part 074-563-07 has a galvanized finish for corrosion resistance in wet, salt-exposed towing environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter lunette eye weigh?\u003c\/strong\u003e It weighs 12.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lunette eye machined or cast?\u003c\/strong\u003e The Dexter lunette eye, part number 074-563-07, is machined for a precise fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'demountable' mean for this part?\u003c\/strong\u003e Demountable means the lunette eye, 074-563-07, can be unbolted and replaced on its own if it wears out or is damaged, without needing to replace the entire trailer tongue or coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 074-563-07?\u003c\/strong\u003e This lunette eye is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lunette eye come with mounting hardware?\u003c\/strong\u003e The dossier for Dexter part 074-563-07 does not specify included hardware; it is listed as the lunette eye component itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this lunette eye?\u003c\/strong\u003e The Dexter part number is 074-563-07.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258804443,"sku":"DEX-074-563-07","price":91.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-gal-dex-25k-3-inch-lunette-eye-074-563-07__08124.1747363800.500.750.jpg?v=1785329083"},{"product_id":"ufp-by-dexter-stainless-steel-bearing-protector-bra-kit-k71-032-00-6k-655-package-2-441-outer-bore","title":"Dexter Stainless Steel Protector \u0026 Bra Kit K71-032-00, 6000 lb \/ 655 Series, 2.441 Inch Outer Bore","description":"\u003cp\u003eThe Dexter Stainless Steel Protector \u0026amp; Bra Kit, part number K71-032-00, is a boat trailer brake component designed to shield the hub and brake assembly from corrosion, road spray, and water intrusion. Built for 6000 lb capacity, 655 series brake hubs with a 2.441 inch outer bore, this kit pairs a stainless steel protector shield (the \"bra\") with a complete fastener package so the assembly can be installed without sourcing separate hardware. Stainless steel construction resists rust and salt corrosion, making it well suited to the wet, salt-exposed environment boat trailers operate in. The kit ships as a single fastener package (quantity 1), covering the hardware needed to mount the protector to the compatible 655 series 6000 lb hub. This part is sold under the Dexter brand and is intended for trailer owners and service shops maintaining or upgrading brake hub protection on boat trailers using 6000 lb \/ 655 series hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-032-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Stainless Steel Protector \u0026amp; Bra Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 6000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 655\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore:\u003c\/strong\u003e 2.441 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Package Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-032-00 Stainless Steel Protector \u0026amp; Bra Kit used for?\u003c\/strong\u003e It protects the brake hub assembly on a boat trailer, shielding it from corrosion and water intrusion. K71-032-00 is built for 6000 lb, 655 series hubs with a 2.441 inch outer bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is the K71-032-00 kit rated for?\u003c\/strong\u003e This kit is rated for 6000 lb trailer axle capacity and is designed for the 655 series brake hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does this protector kit fit?\u003c\/strong\u003e The K71-032-00 kit is sized for a 2.441 inch outer bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Dexter protector and bra kit made from?\u003c\/strong\u003e The protector shield in kit K71-032-00 is made of stainless steel, chosen for its resistance to rust and salt corrosion in marine trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-032-00 kit include mounting hardware?\u003c\/strong\u003e Yes, the kit includes a fastener package (quantity 1) needed to install the stainless steel protector onto the compatible hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit made by Dexter?\u003c\/strong\u003e Yes, K71-032-00 is a Dexter brand part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake series is the K71-032-00 protector kit compatible with?\u003c\/strong\u003e It is designed for 655 series brake hubs rated to 6000 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-032-00 protector kit weigh?\u003c\/strong\u003e The kit weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is K71-032-00?\u003c\/strong\u003e K71-032-00 is a boat trailer brake component, specifically a hub protector and fastener kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this protector kit be used on trailers with a different outer bore size?\u003c\/strong\u003e K71-032-00 is sized for a 2.441 inch outer bore on 655 series, 6000 lb hubs; a different bore size would require a different Dexter part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262605531,"sku":"DEX-K71-032-00","price":122.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-6000lbs-6-Lug-5-and-a-half-inch-Trailer-Buddy-Protector-with-Bra-K71-032-00__89144.1747363799.500.750.jpg?v=1785188736"},{"product_id":"stainless-steel-disc-brake-caliper-protector-bra-kit-fits-2-1k-to-3-5k-trailer-axles-1-980in-outer-bore-k71-034-00","title":"Dexter Stainless Steel Protector \u0026 Bra Kit, 2.1K-3.5K Axle, 545 Hub, 1.980 Inch Outer Bore, K71-034-00","description":"\u003cp\u003eThe Dexter K71-034-00 Stainless Steel Protector \u0026amp; Bra Kit shields the brake assembly on 2.1K-3.5K boat trailer axles from corrosion and road debris. Built for trailers using the 545 hub with a 1.980 inch outer bore, the kit is made from stainless steel so it resists the corrosive effects of saltwater and road spray that quickly degrade painted or bare steel components. Boat trailer brakes sit close to the ground and are routinely splashed with water, salt, sand, and grit during launch and retrieval, and this protector\/bra kit is designed to guard the brake components from that direct exposure, helping extend the service life of the brake hardware underneath.\u003c\/p\u003e\u003cp\u003eThis kit is sized specifically for the 2.1K-3.5K axle rating with a 545 hub and 1.980 inch outer bore, so it is intended for trailers matching that hub and bore specification. Because the kit is stainless steel rather than a coated or painted alternative, it holds up to repeated dunking and drying cycles without the finish chipping or rusting through over time, which is a common failure point for boat trailer components used in saltwater.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-034-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Stainless Steel Protector \u0026amp; Bra Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Rating:\u003c\/strong\u003e 2.1K - 3.5K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Size:\u003c\/strong\u003e 545\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore:\u003c\/strong\u003e 1.980 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008230\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-034-00 Protector \u0026amp; Bra Kit used for?\u003c\/strong\u003e It is a stainless steel cover kit that protects the brake assembly on a boat trailer axle from water, salt, and road debris exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle rating does this kit fit?\u003c\/strong\u003e The Dexter K71-034-00 is sized for 2.1K to 3.5K rated boat trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub size is this protector kit designed for?\u003c\/strong\u003e It is built for a 545 hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does the K71-034-00 kit require?\u003c\/strong\u003e A 1.980 inch outer bore is required for proper fit with this Dexter kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Dexter K71-034-00 kit made from?\u003c\/strong\u003e Stainless steel, chosen for its resistance to corrosion from saltwater and road exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-034-00 Protector \u0026amp; Bra Kit weigh?\u003c\/strong\u003e It weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit any boat trailer hub?\u003c\/strong\u003e No, the K71-034-00 is specific to a 545 hub with a 1.980 inch outer bore and a 2.1K-3.5K axle rating, so it should be matched against those specifications before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a stainless steel protector kit over a standard cover?\u003c\/strong\u003e Stainless steel resists rust and corrosion better than painted or bare steel, which matters for boat trailer brake components that are regularly submerged in water and exposed to salt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter K71-034-00 include mounting hardware?\u003c\/strong\u003e The kit is sold as the stainless steel protector and bra components sized for the 2.1K-3.5K, 545 hub, 1.980 inch outer bore application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-034-00 kit?\u003c\/strong\u003e The UPC for this Dexter Stainless Steel Protector \u0026amp; Bra Kit is 876983008230.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262769371,"sku":"DEX-K71-034-00","price":83.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-3500lbs-5-lug-4.5-inch-hub-trailer-buddy-protector-with-bra-k71-034-00__52829.1747363799.500.750.jpg?v=1785329092"},{"product_id":"tie-down-engineering-59533-trailer-safety-cables-pair-2-000-lb-black-vinyl-jacketed-with-wire-safety-latch-self-coiling-for-boat-utility-trailers","title":"Tie Down Engineering Trailer Safety Cable 59533, 2,000 lb Capacity, Black Vinyl Jacketed with Wire Safety Latch, Pair","description":"\u003cp\u003eThe Tie Down Engineering safety cable, part number 59533, is a 2,000 lb capacity trailer safety cable set sold as a pair. Each cable is built from 7x19 aircraft cable and finished with a black vinyl jacket that protects against rust, abrasion, and corrosion in recreational, light-duty towing environments. A wire safety latch on each cable allows quick, secure connection to the trailer and tow vehicle hitch. The self-coiling design keeps the cable lifted off the ground during towing, preventing it from dragging or tangling, and keeps it organized during storage. Each pair extends to 36 inches in length, giving enough reach to properly connect the trailer to the vehicle while still allowing normal turning clearance. This cable set exceeds SAE J684 trailer coupling standards and is NMMA certified, making it a reliable safety backup connection in the event the primary hitch coupling fails. It is well suited for jet ski trailers, utility trailers, and other light-duty towing applications rated up to 2,000 lbs. The set includes two hitch cables with wire latches, ready to install directly onto existing trailer safety chain or cable attachment points.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 59533\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 2,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Vinyl Jacketed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch Type:\u003c\/strong\u003e Wire Safety Latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Construction:\u003c\/strong\u003e 7x19 Aircraft Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 36 inches per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon Steel, Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 Hitch Cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.97 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e Exceeds SAE J684, NMMA Certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628595338\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Tie Down 59533 safety cable?\u003c\/strong\u003e The Tie Down Engineering 59533 safety cable has a 2,000 lb load capacity, making it suited for light-duty utility and jet ski trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables come in part number 59533?\u003c\/strong\u003e Part number 59533 is sold as a pair, including 2 hitch cables each fitted with a wire safety latch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e Each 59533 cable uses 7x19 aircraft cable construction with a black vinyl jacket over the carbon steel cable for added protection against rust and abrasion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each safety cable?\u003c\/strong\u003e The 59533 pair extends to 36 inches in length, providing enough reach to connect the trailer to the tow vehicle hitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 59533 cable meet towing safety standards?\u003c\/strong\u003e Yes, the Tie Down 59533 safety cable exceeds SAE J684 trailer coupling standards and is NMMA certified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of latch does the 59533 use?\u003c\/strong\u003e A wire safety latch is fitted to each end of the 59533 cable for quick, secure attachment to the hitch and trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the cable self-coiling?\u003c\/strong\u003e The self-coiling design of the 59533 keeps the cable lifted off the ground during towing, which prevents it from dragging or tangling and keeps it neatly stored between uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does part 59533 have?\u003c\/strong\u003e Part 59533 has a black vinyl jacketed finish over the steel cable, which resists corrosion in recreational towing environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 59533 safety cable set weigh?\u003c\/strong\u003e The Tie Down 59533 pair weighs 0.97 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the 59533 cable designed for?\u003c\/strong\u003e This 2,000 lb rated cable is designed for light-duty towing applications such as jet ski trailers and small utility trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a higher capacity version of this cable available?\u003c\/strong\u003e Tie Down Engineering also makes higher capacity vinyl jacketed and galvanized safety cables under different part numbers such as 59535, 59537, 59539, and 59541 for 3,500 lb and 5,000 lb rated applications.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991665881307,"sku":"T-D-59533","price":23.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71MVPtJeXqL.jpg?v=1784509593"},{"product_id":"tie-down-81201-bow-safety-chain-3-16-in-x-15-1-2-in-zinc-plated-steel-with-3-8-in-s-hook-for-boat-trailers","title":"Tie Down Engineering Bow Safety Chain, 3\/16 in. X 15-1\/2 in. Zinc-Plated Steel with 3\/8 in. S-Hook","description":"\u003cp\u003eThis bow safety chain from Tie Down Engineering secures your boat to the bow stand on the trailer during loading and transport. Made from 3\/16 in. (#30 proof coil) steel and finished with zinc plating for corrosion resistance in both freshwater and saltwater environments, the chain measures 15-1\/2 in. In total length. A 3\/8 in. Zinc-plated S-Hook with wire latch is included, allowing the chain to attach quickly to the boat's bow eye and winch stand without tools. This creates a dependable mechanical connection between the boat and trailer, helping prevent the boat from shifting or detaching while it is being winched onto the trailer or towed down the road. The chain is a common replacement or upgrade item for boat, personal watercraft, and utility trailers where the factory safety chain has worn, corroded, or been lost. Its compact package size and simple hook-and-latch design make it straightforward to install as a direct swap on most standard bow stands.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 81201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Type:\u003c\/strong\u003e #30 proof coil, zinc-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Diameter:\u003c\/strong\u003e 3\/16 in. (0.1875 in.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 15-1\/2 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS-Hook:\u003c\/strong\u003e 3\/8 in. Zinc-plated with wire latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Silver (zinc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.73 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 4.75 in. X 1.50 in. X 7.00 in. (L x W x H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Boat, Trailer, Watercraft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for boat, trailer, and watercraft applications; attaches to the bow eye and winch stand\/bow post on most standard trailer setups.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length of the Tie Down 81201 bow safety chain?\u003c\/strong\u003e The chain measures 15-1\/2 in. In total length, made from 3\/16 in. Diameter steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this chain come with a hook?\u003c\/strong\u003e Yes, the Tie Down 81201 includes a 3\/8 in. Zinc-plated S-Hook with a wire latch for attaching to the bow eye.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the chain used for?\u003c\/strong\u003e It attaches the boat to the bow stand on the trailer, keeping the boat secured during loading, launching, and towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this chain rated for saltwater use?\u003c\/strong\u003e Yes, the zinc-plated finish on the Tie Down 81201 resists rust and corrosion in both freshwater and saltwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the chain made from?\u003c\/strong\u003e It is made from alloy steel, specifically 3\/16 in. (0.1875 in.) diameter #30 proof coil chain, with a zinc-plated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the chain weigh?\u003c\/strong\u003e The Tie Down 81201 bow safety chain weighs 0.73 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit any boat trailer?\u003c\/strong\u003e It has a universal fit and is compatible with boat, trailer, and watercraft applications, working with most standard bow stands and winch posts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation tool-free?\u003c\/strong\u003e Yes, the chain and S-Hook attach to the bow eye and winch stand without requiring tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the package include?\u003c\/strong\u003e Each package includes one 15-1\/2 in. Bow safety chain with an attached 3\/8 in. Zinc-plated S-Hook and wire latch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 81201 chain made by Tie Down Engineering?\u003c\/strong\u003e Yes, part number 81201 is manufactured by Tie Down Engineering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the chain have?\u003c\/strong\u003e The chain has a silver zinc-plated finish, part number 81201.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991666634971,"sku":"T-D-81201","price":5.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-81201_lg__03142.1558134042.500.750.jpg?v=1785188794"},{"product_id":"tie-down-engineering-81202-marine-safety-chains-with-s-hooks-class-2-3-16-in-x-31-in-sold-in-pairs","title":"Tie Down Engineering 81202 Class 2 Safety Chain Pair, 3\/16 in. X 31 in., Zinc-Plated Steel with E-Hooks","description":"\u003cp\u003eThe Tie Down Engineering 81202 is a Class 2 safety chain sold in pairs, designed to provide the required secondary connection between a trailer and tow vehicle during boat and equipment hauling. Each chain measures 31 inches overall length and is built from 3\/16 inch zinc-plated steel for corrosion resistance during repeated outdoor and marine trailer use. Every chain in the pair is fitted with e-hooks on the ends, allowing quick attachment to the trailer frame and the tow vehicle's safety chain loops.\u003c\/p\u003e\u003cp\u003eSafety chains are a required backup to the trailer hitch coupler, designed to keep the trailer connected to the tow vehicle if the coupler ever separates from the ball. Because this chain is sold as a matched pair, it supplies both the left and right connection points needed for a complete, code-compliant hookup in a single purchase. The zinc plating on the steel chain resists rust and wear from road spray, launch ramps, and saltwater exposure, making it suited to boat trailers as well as general utility and equipment trailers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 81202\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass:\u003c\/strong\u003e Class 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Diameter:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 31 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs (2 chains)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Type:\u003c\/strong\u003e E-hooks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 3500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.44 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628812022\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal trailer safety chain and is not restricted to a specific trailer make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat class of safety chain is the Tie Down Engineering 81202?\u003c\/strong\u003e The 81202 is a Class 2 safety chain, made from 3\/16 inch zinc-plated steel with an overall length of 31 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many chains come in the 81202 package?\u003c\/strong\u003e This item is sold in pairs, giving you two matching 31 inch safety chains for both sides of the trailer coupler in one purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hooks does the 81202 safety chain use?\u003c\/strong\u003e Each 81202 chain is fitted with e-hooks on the ends for attaching to the trailer frame and the tow vehicle's chain loops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Tie Down Engineering 81202 safety chain?\u003c\/strong\u003e 3500 pounds is the rated load capacity for the 81202 Class 2 safety chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 81202 chain rust resistant?\u003c\/strong\u003e Yes, the 81202 is built from zinc-plated steel, which resists corrosion from road spray, boat ramps, and saltwater exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 81202 safety chain pair weigh?\u003c\/strong\u003e The Tie Down Engineering 81202 pair weighs 2.44 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 81202 fit any trailer?\u003c\/strong\u003e The 81202 is a universal Class 2 safety chain and is not restricted to a specific trailer make or model, so it works as a general-purpose replacement or upgrade chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 81202 and the 81205 chain?\u003c\/strong\u003e The 81202 is sold as a pair of 31 inch e-hook chains, while the 81205 is a single 36 inch chain fitted with S-hooks on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 81202 and the 81203 or 81204 chains?\u003c\/strong\u003e The 81202 is a Class 2, 3\/16 inch chain at 31 inches overall length, while the 81203 is a Class 3, 1\/4 inch chain and the 81204 is a Class 4, 5\/16 inch chain measuring 40-3\/4 inches overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need two safety chains when towing?\u003c\/strong\u003e Yes, a pair of safety chains like the 81202 provides the required backup connection on both sides between the trailer and tow vehicle in case the hitch coupler separates from the ball.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 81202 safety chain made from?\u003c\/strong\u003e The 81202 safety chain is made from zinc-plated steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tie Down Engineering 81202 genuine or aftermarket?\u003c\/strong\u003e The 81202 is a genuine Tie Down Engineering part, identified by manufacturer part number 81202.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991667618011,"sku":"T-D-81202","price":15.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71gJNxOzYpL.jpg?v=1784509660"},{"product_id":"tie-down-engineering-81203-class-3-trailer-safety-chain-with-s-hooks-1-4-in-x-31-in","title":"Tie Down Engineering Class 3 Boat Trailer Safety Chain with S-Hooks, 1\/4 in. X 31 in.","description":"\u003cp\u003eThe Tie Down Engineering 81203 is a Class 3 boat trailer safety chain built with 1\/4 in. Diameter chain and an overall length of 31 in. It is part of Tie Down Engineering's bow safety chain lineup, which secures the boat to the trailer as an added connection point during loading and transport. The chain is fitted with S-hooks for attaching to the trailer and boat hardware, making it a straightforward add-on or replacement for trailers that call for a Class 3 rated chain.\u003c\/p\u003e\u003cp\u003eTie Down Engineering offers this bow safety chain in multiple classes and lengths to match different trailer and boat weights, so buyers can select the 81203 specifically when a Class 3, 1\/4 in. Chain at 31 in. Overall length is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 81203\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass:\u003c\/strong\u003e Class 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Diameter:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 31 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e S-Hooks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628812039\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Hitches \u0026amp; Safety Chain\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat class rating is the Tie Down Engineering 81203 chain?\u003c\/strong\u003e The 81203 is a Class 3 rated safety chain, positioned between the lighter Class 2 chains and the heavier Class 4 chains in the Tie Down Engineering lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 81203 safety chain?\u003c\/strong\u003e The overall length of the 81203 is 31 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the chain diameter on the 81203?\u003c\/strong\u003e This Class 3 chain uses 1\/4 in. Diameter chain link.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 81203 come with hooks for attachment?\u003c\/strong\u003e Yes, the 81203 is fitted with S-hooks for connecting the chain to the trailer and boat hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 81203 chain weigh?\u003c\/strong\u003e The Tie Down Engineering 81203 weighs 3.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 81203 the same as the Class 2 or Class 4 versions?\u003c\/strong\u003e No. The 81203 is the Class 3, 1\/4 in., 31 in. Version; the Class 2 chain (part 81202) uses 3\/16 in. Chain at 31 in. Overall length, and the Class 4 chain (part 81204) uses 5\/16 in. Chain at 40-3\/4 in. Overall length. Each is a separate part number, so order the one matching the required class and length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this chain?\u003c\/strong\u003e The manufacturer part number is 81203.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the 81203?\u003c\/strong\u003e The UPC for the Tie Down Engineering 81203 safety chain is 081628812039.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the 81203 fall under?\u003c\/strong\u003e The 81203 is listed under Boat Trailer Hitches \u0026amp; Safety Chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 81203 sold with a single chain and hooks on both ends?\u003c\/strong\u003e The 81203 is supplied with S-hooks for attachment; it is the Class 3, 1\/4 in., 31 in. Version in the Tie Down Engineering bow safety chain lineup.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991667781851,"sku":"T-D-81203","price":18.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_86a8a0e9-5967-4a75-88b1-f77a91c8918e.jpg?v=1785353690"},{"product_id":"tie-down-engineering-59548-class-iv-trailer-hitch-cables-black-vinyl-7-000-lb-safety-latch-hook-pair","title":"Tie Down Engineering 59548 Trailer Hitch Safety Cables, Class IV 7,000 lb Black Vinyl-Coated Pair","description":"\u003cp\u003eThe Tie Down Engineering 59548 is a pair of Class IV trailer hitch safety cables built as a self-coiling alternative to standard hitch safety chains. Each cable uses galvanized aircraft-grade cable construction that exceeds SAE J684 standards for trailer coupling and automotive-style hitches, and the set is NMMA certified for boat trailer applications. A black vinyl coating covers the cable for corrosion resistance and a cleaner finish, while a heavy-duty forged S-hook style latch hook on each cable secures to the tow vehicle for a reliable connection. The cables are rated to a 7,000 pound breaking strength and load capacity, and each cable in the pair measures 36 inches with its snap hook attached. The self-coiling design keeps the cables compact and tangle-free between hookups, making them easier to store and handle than bulky chain. Sold as a pair (2 pieces), the 59548 set weighs 2.19 pounds and is intended as a direct, code-compliant safety connection for Class IV rated trailer hitches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 59548\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass Rating:\u003c\/strong\u003e Class IV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Strength:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon Steel, Vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black Vinyl-Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 36 inches (with snap hook)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Type:\u003c\/strong\u003e Forged S-Hook Latch Hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold in pairs (2 pieces)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e NMMA Certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Compliance:\u003c\/strong\u003e Exceeds SAE J684\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628595482\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the breaking strength of the Tie Down Engineering 59548 hitch cables?\u003c\/strong\u003e 7,000 pounds is the rated breaking strength and load capacity of the Tie Down Engineering 59548 hitch cable pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables come in the package?\u003c\/strong\u003e Two hitch cables are included, since the 59548 is sold as a pair by Tie Down Engineering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hitch class are these cables rated for?\u003c\/strong\u003e The 59548 hitch cables are rated Class IV, matching their 7,000 pound breaking strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each hitch cable?\u003c\/strong\u003e Each cable in the Tie Down Engineering 59548 set measures 36 inches with its snap hook attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the 59548 hitch cables made from?\u003c\/strong\u003e They are made of galvanized aircraft-grade carbon steel cable with a black vinyl coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these hitch cables NMMA certified?\u003c\/strong\u003e Yes, the Tie Down Engineering 59548 hitch cables are NMMA certified for boat trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standard do the 59548 cables meet?\u003c\/strong\u003e They exceed SAE J684 standards for trailer coupling and automotive-style hitches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hook is on each cable?\u003c\/strong\u003e Each 59548 cable uses a heavy-duty forged S-hook style latch hook for attaching to the tow vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these cables be used instead of safety chains?\u003c\/strong\u003e Yes, the self-coiling design of the 59548 hitch cables makes them a compact, tangle-free alternative to standard trailer safety chains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish do the hitch cables have?\u003c\/strong\u003e The Tie Down Engineering 59548 cables have a black vinyl coating over the galvanized steel cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 59548 hitch cable set weigh?\u003c\/strong\u003e The pair weighs 2.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 59548 hitch cable galvanized?\u003c\/strong\u003e Yes, it uses galvanized aircraft-grade cable construction beneath the black vinyl coating.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991667814619,"sku":"T-D-59548","price":40.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71JboKkAYzL.jpg?v=1784509676"},{"product_id":"tie-down-engineering-59537-galvanized-trailer-safety-cable-5-000-lb-class-iii-with-wire-safety-latch-pair","title":"Tie Down Engineering 59537 Galvanized Trailer Safety Cable, 5,000 lb Capacity, Wire Safety Latch","description":"\u003cp\u003eThe Tie Down Engineering 59537 is a galvanized trailer safety cable rated for 5,000 pounds, used as a backup connection between a trailer and tow vehicle in case the primary hitch coupling fails. The galvanized finish resists corrosion, making this cable well suited to boat trailers and other trailers regularly exposed to launch ramps, road salt, and outdoor storage. Each cable is fitted with a wire safety latch, which keeps the hook securely closed on the tow vehicle's attachment point during towing so the cable cannot work itself loose over a drive.\u003c\/p\u003e\u003cp\u003eThis safety cable is sold under Tie Down Engineering part number 59537 and is rated to a 5,000 pound working capacity, placing it a step above the company's 3,500 pound cables for trailers and loads that need the extra margin. It installs by looping or hooking the cable between the trailer tongue and the tow vehicle's frame or hitch, providing a secondary connection alongside the trailer's primary coupling and any required safety chains.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 59537\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch Type:\u003c\/strong\u003e Wire safety latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628595376\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of the Tie Down Engineering 59537 safety cable?\u003c\/strong\u003e The 59537 is rated for 5,000 pounds, which is Tie Down Engineering's mid-capacity safety cable, above their 3,500 pound cables and below their 7,000 pound cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does part number 59537 have?\u003c\/strong\u003e Part number 59537 has a galvanized finish, which resists corrosion better than an unfinished steel cable in wet or salt-exposed towing conditions such as boat launch ramps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 59537 cable have a latch to keep it attached?\u003c\/strong\u003e Yes, the 59537 is equipped with a wire safety latch that closes over the hook to keep the cable secured to the tow vehicle's attachment point while towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Tie Down Engineering 59537 made of steel?\u003c\/strong\u003e Yes, the 59537 safety cable is made of galvanized steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 59537 safety cable weigh?\u003c\/strong\u003e The Tie Down Engineering 59537 weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a trailer safety cable used for?\u003c\/strong\u003e A trailer safety cable, such as the Tie Down Engineering 59537, is a backup connection between the trailer tongue and the tow vehicle that helps keep the trailer attached if the primary hitch coupling ever comes loose or fails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the galvanized 59537 different from the black vinyl-jacketed 5,000 pound cable?\u003c\/strong\u003e Yes, Tie Down Engineering offers a 5,000 pound cable in a black vinyl-jacketed finish under a different part number as an alternative to the galvanized finish of the 59537.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 59537 be used in place of a safety chain?\u003c\/strong\u003e The 59537 is a safety cable rated to 5,000 pounds and functions as the secondary trailer-to-vehicle connection; check your trailer's requirements and local regulations to confirm whether a cable or chain is required for your setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for Tie Down Engineering part number 59537?\u003c\/strong\u003e The UPC for the Tie Down Engineering 59537 galvanized safety cable is 081628595376.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 59537 a genuine Tie Down Engineering product?\u003c\/strong\u003e Yes, 59537 is Tie Down Engineering's own manufacturer part number for this 5,000 pound galvanized safety cable.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991676956891,"sku":"T-D-59537","price":26.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71MVPtJeXqL_57d557e9-c85a-4898-847c-2af6bae55f8b.jpg?v=1784509689"},{"product_id":"tie-down-class-4-trailer-safety-chains-5-16-in-x-40-3-4-in-with-s-hooks-7-000-lb-mpn-81204-pair","title":"Tie Down Engineering Class 4 Safety Chain, 5\/16 in. X 40-3\/4 in., Sold in Pairs with S-Hooks","description":"\u003cp\u003eThis Tie Down Engineering safety chain is built for towing and boat trailer applications that call for a Class 4 rated backup connection. Sold as a pair, each chain measures 5\/16 in. In diameter with an overall length of 40-3\/4 in., and the set includes two S-hooks for quick, secure attachment between the trailer and the towing vehicle or between the boat and the bow stand on the trailer. The chain is constructed of zinc-plated steel, giving it a durable, corrosion-resistant finish suited to outdoor and marine-adjacent use. With a Class 4 rating, this pair supports a combined load capacity of 7000 pounds, making it appropriate for larger trailers and heavier towing loads where a single lighter-duty chain would not be sufficient. The included S-hooks are designed for straightforward hookup without additional hardware, so the chains can be swapped onto a trailer as a direct replacement set. Whether used as the required safety backup for a tow vehicle connection or as a bow safety chain securing a boat to its trailer stand, this Tie Down Engineering Class 4 chain (part number 81204) provides a strong, reliable link. Each unit in the pair weighs 6.76 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 81204\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass:\u003c\/strong\u003e Class 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain Diameter:\u003c\/strong\u003e 5\/16 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 40-3\/4 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Zinc plated (silver)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Type:\u003c\/strong\u003e S-hooks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 safety chains with 2 S-hooks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.76 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis Class 4, 5\/16 in. Safety chain is suited to trailers requiring a Class 4 rated safety chain connection, including use as a bow safety chain securing a boat to the bow stand on the trailer.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Tie Down Engineering 81204 safety chain?\u003c\/strong\u003e The 81204 chain carries a Class 4 rating with a load capacity of 7000 pounds, making it suited to heavier trailer and towing applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is part number 81204?\u003c\/strong\u003e Part number 81204 has an overall length of 40-3\/4 in. And a chain diameter of 5\/16 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this chain come with hooks already attached?\u003c\/strong\u003e Yes, the 81204 pair includes two S-hooks for attaching the chains between the trailer and the tow vehicle or boat stand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many chains are included in this listing?\u003c\/strong\u003e This is sold as a pair, giving you 2 safety chains with 2 S-hooks total, part number 81204.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 81204 safety chain made from?\u003c\/strong\u003e The chain is made of zinc-plated steel, which resists corrosion during outdoor and towing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this chain be used as a bow safety chain?\u003c\/strong\u003e Yes, this Class 4, 5\/16 in. Chain can be used to secure a boat to the bow stand on the trailer, in addition to standard tow vehicle safety chain use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat class rating does part 81204 have?\u003c\/strong\u003e Part 81204 is Class 4 rated, the heaviest-duty classification in this chain lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 81204 chain weigh?\u003c\/strong\u003e The Tie Down Engineering 81204 chain weighs 6.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct replacement part?\u003c\/strong\u003e Yes, the 81204 Class 4 safety chain is designed as a replacement set for worn or damaged trailer safety chains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 81204 chain and other chains in the same lineup?\u003c\/strong\u003e The 81204 is the Class 4, 5\/16 in. Chain with a 40-3\/4 in. Overall length; other part numbers in the same lineup use different classes and shorter lengths for lighter-duty use.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991678202075,"sku":"T-D-81204","price":34.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71PO8FYJcjL.jpg?v=1784509721"},{"product_id":"tie-down-59541-trailer-safety-cables-7-000-lb-class-iv-galvanized-self-coiling-hitch-cable-pair-with-s-hooks-and-wire-safety-latch","title":"Tie Down Engineering 59541 Trailer Safety Cables, 7,000 lb Capacity, Galvanized, Pair","description":"\u003cp\u003eThe Tie Down Engineering 59541 is a pair of trailer safety cables rated for 7,000 lbs, finished in galvanized steel and fitted with a wire safety latch on each cable. Safety cables are a required backup connection between the tow vehicle and trailer, catching the trailer in the event the primary hitch coupling fails, so choosing a set rated for your trailer's gross weight is essential for safe towing. Each cable in the 59541 pair is self-coiling, keeping slack cable off the road surface during turns and preventing drag, and each pair extends to 36 inches in length when pulled straight. The cables terminate in S-hooks fitted with a wire safety latch that closes over the hook opening, reducing the chance of the cable working loose from the hitch or trailer frame during transport. The galvanized finish resists corrosion, which matters for hardware that is routinely exposed to road spray, moisture, and salt. This design meets or exceeds SAE J684 standards for trailer coupling devices, the specification that governs safety cable and hitch hardware performance. The 59541 is sold as a matched pair and fits a universal range of trailer and hitch setups rather than being limited to a specific make or model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 59541\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 7,000 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Latch:\u003c\/strong\u003e Wire safety latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Type:\u003c\/strong\u003e S-hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Self-coiling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 (sold as a pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 36 inches per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e Meets or exceeds SAE J684\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628595413\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for trailer hitch and coupling setups; not limited to a specific make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is the Tie Down Engineering 59541 rated for?\u003c\/strong\u003e The 59541 safety cable pair is rated for 7,000 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables come in the 59541 set?\u003c\/strong\u003e The Tie Down Engineering 59541 is sold as a matched pair, two safety cables per set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 59541 safety cable have?\u003c\/strong\u003e The 59541 has a galvanized finish, chosen for corrosion resistance in road and moisture exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is each cable when extended?\u003c\/strong\u003e Each cable in the 59541 pair extends to 36 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 59541 fit a specific trailer make or model?\u003c\/strong\u003e No, the Tie Down Engineering 59541 is a universal-fit safety cable set, not limited to a specific trailer make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of hook does the 59541 use?\u003c\/strong\u003e The 59541 terminates in S-hooks, each fitted with a wire safety latch to help keep the hook secured during towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 59541 self-coiling?\u003c\/strong\u003e Yes, the Tie Down Engineering 59541 cables are self-coiling, which keeps slack cable off the ground during turns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat standard does the 59541 meet?\u003c\/strong\u003e The 59541 meets or exceeds SAE J684, the standard covering trailer coupling devices including safety cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 59541 pair weigh?\u003c\/strong\u003e The Tie Down Engineering 59541 pair weighs 2.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the 59541 safety cables made from?\u003c\/strong\u003e The 59541 cables are galvanized steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre trailer safety cables required for towing?\u003c\/strong\u003e Safety cables like the Tie Down Engineering 59541 serve as a backup connection between the tow vehicle and trailer in case the primary hitch coupling fails, and are a standard towing safety component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 59541?\u003c\/strong\u003e The UPC for the 59541 safety cable pair is 081628595413.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991681609947,"sku":"T-D-59541","price":28.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71MVPtJeXqL_87e467fa-aefc-4579-812c-d835d972f278.jpg?v=1784509824"},{"product_id":"tie-down-engineering-86060-spare-tire-carrier-for-6-8-lug-trailer-wheels-aluminum-and-i-beam-frames","title":"Tie Down Engineering Spare Tire Carrier 86060, 6\/8 Lug, for Aluminum and I-Beam Trailer Frames","description":"\u003cp\u003eThe Tie Down Engineering Spare Tire Carrier 86060 is a heavy-duty mount built for larger trailer wheels, including 6-lug and 8-lug patterns. It is made for aluminum and I-beam trailer frames, giving trailer owners a dedicated place to carry a spare so it is not rattling around loose in a truck bed or trailer deck. The carrier is engineered to withstand heavy use, making it a practical choice for utility, boat, and cargo trailers that run larger, heavier wheel and tire combinations.\u003c\/p\u003e\u003cp\u003eInstallation hardware is included with the 86060, so the carrier arrives ready to mount without a separate trip for bolts. Because it is designed around larger wheel sizes and aluminum or I-beam frame construction, it suits trailer owners upgrading from a standard-duty spare mount to one rated for bigger wheels. As part number 86060 from Tie Down Engineering, it carries the same manufacturer backing as the rest of the brand's spare tire carrier lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86060\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Spare Tire Carriers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLug Pattern Compatibility:\u003c\/strong\u003e 6-lug and 8-lug wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Frame Types:\u003c\/strong\u003e Aluminum frames, I-beam frames\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size Rating:\u003c\/strong\u003e Larger trailer wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Yes, mounting hardware included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.95 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628860603\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size wheels does the Tie Down Engineering 86060 spare tire carrier fit?\u003c\/strong\u003e The 86060 is made for larger trailer wheels with 6-lug and 8-lug patterns, so it suits trailers running bigger wheel and tire combinations than a standard-duty carrier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part number 86060 work with aluminum trailer frames?\u003c\/strong\u003e Yes, the Tie Down Engineering 86060 is made for both aluminum frames and I-beam frames.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 86060 spare tire carrier?\u003c\/strong\u003e Yes, installation hardware is included with the 86060, so no separate bolts need to be purchased for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tie Down Engineering 86060 weigh?\u003c\/strong\u003e The 86060 spare tire carrier weighs 13.95 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 86060 hold up under heavy use?\u003c\/strong\u003e It is built to withstand heavy use, making the 86060 a durable option for utility, boat, and cargo trailers carrying larger spare wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 86060?\u003c\/strong\u003e The UPC for the 86060 spare tire carrier is 081628860603.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86060 an I-beam-specific carrier or does it also fit other frame types?\u003c\/strong\u003e The 86060 is made for both aluminum-framed trailers and I-beam frames, unlike some Tie Down Engineering carriers that are designed for only one frame type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 86060 be used on a trailer with a 5-lug spare wheel?\u003c\/strong\u003e The 86060 is designed for 6-lug and 8-lug wheel patterns, so it is intended for larger wheels rather than a 5-lug spare.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures the 86060 spare tire carrier?\u003c\/strong\u003e The 86060 is manufactured by Tie Down Engineering as part of its Spare Tire Carriers lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the 86060?\u003c\/strong\u003e The 86060 is listed in the Spare Tire Carriers category by Tie Down Engineering.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991685574875,"sku":"T-D-86060","price":92.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/86060__67763.1722498053.500.750.jpg?v=1785329217"},{"product_id":"tie-down-engineering-spare-tire-carrier-86069-hot-dip-galvanized-fits-4-5-6-lug-trailer-wheels","title":"Tie Down Engineering Spare Tire Carrier 86069, Hot-Dip Galvanized, Fits 4-, 5-, and 6-Lug Wheels","description":"\u003cp\u003eThe Tie Down Engineering Spare Tire Carrier (part number 86069) is a hot-dip galvanized, welded mount that holds a spare wheel and tire on a trailer frame so it is ready for a roadside change. The carrier is adjustable to fit 4-, 5-, and 6-lug wheels, making it a versatile choice for utility, boat, and cargo trailers that run different bolt patterns. Construction is welded for strength, and the hot-dip galvanized finish resists rust and corrosion from road spray and marine exposure, so the carrier holds up in the same wet, salty conditions the trailer itself sees.\u003c\/p\u003e\u003cp\u003eInstallation hardware is included: the 86069 ships with the bolts and lugs needed to mount the spare wheel to the carrier, so no separate hardware purchase is required for the mounting itself. This makes it a straightforward add-on for a trailer that currently has no spare tire mount, or a direct replacement for a worn-out or rusted-through carrier.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86069\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Fitment:\u003c\/strong\u003e Adjustable to fit 4-lug, 5-lug, and 6-lug wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-dip galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Welded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Bolts and lugs for installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628860696\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel bolt patterns does the 86069 spare tire carrier fit?\u003c\/strong\u003e The Tie Down Engineering 86069 is adjustable to fit 4-lug, 5-lug, and 6-lug wheels, so it works across several common trailer wheel bolt patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with this spare tire carrier?\u003c\/strong\u003e Yes, the 86069 ships with the bolts and lugs needed for installation, so no separate hardware purchase is required to mount it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the spare tire carrier made of?\u003c\/strong\u003e The 86069 is hot-dip galvanized and welded steel, giving it a rust-resistant finish and a welded construction for strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tie Down Engineering 86069 weigh?\u003c\/strong\u003e The 86069 spare tire carrier weighs 8.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this carrier rust after exposure to saltwater or road spray?\u003c\/strong\u003e The hot-dip galvanized finish on the 86069 is designed to resist corrosion from road spray and wet conditions, which is why it is built this way for trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86069 include the spare tire itself?\u003c\/strong\u003e No, the 86069 is the carrier\/mount only; it holds a spare wheel and tire that the buyer supplies, and it includes the bolts and lugs to mount it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tie Down Engineering 86069 welded or bolted together?\u003c\/strong\u003e It is welded for strength, not just bolted, which is part of how the 86069 is constructed to hold up under trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this carrier be used on a boat trailer?\u003c\/strong\u003e The 86069 is a general-purpose trailer spare tire carrier and its galvanized finish suits wet-condition use such as boat trailers, since it fits 4-, 5-, and 6-lug wheels commonly used on trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 86069 and Tie Down Engineering's other spare tire carriers?\u003c\/strong\u003e The 86069 is the standard hot-dip galvanized carrier adjustable for 4-, 5-, and 6-lug wheels with included mounting bolts and lugs; Tie Down Engineering also offers separate carrier models built for aluminum I-beam trailers or for use with a pre-greased spare hub, which are different part numbers from the 86069.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86069 a genuine Tie Down Engineering part?\u003c\/strong\u003e Yes, part number 86069 is a genuine Tie Down Engineering spare tire carrier.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991687540955,"sku":"T-D-86069","price":75.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/86069__19856.1739462956.500.750.jpg?v=1785329217"},{"product_id":"tie-down-86064-spare-tire-carrier-for-aluminum-i-beam-trailers-galvanized-steel-fits-4-5-lug-wheels-hardware-included","title":"Tie Down Engineering Spare Tire Carrier 86064 for Aluminum I-Beam Trailers, Fits 4- and 5-Lug Wheels","description":"\u003cp\u003eThe Tie Down Engineering Spare Tire Carrier, part number 86064, is built specifically for aluminum I-beam trailers that need a dedicated spare tire mounting solution. Rather than clamping onto the frame, this carrier is designed to be through-bolted directly to the trailer's I-beam frame, giving the spare a solid, permanent mounting point instead of relying on a U-bolt clamp arrangement. It accommodates both 4-lug and 5-lug wheels, so it works across a range of aluminum trailer setups without needing a different carrier for each wheel pattern.\u003c\/p\u003e\u003cp\u003eConstruction is galvanized, which protects the carrier against rust and corrosion from ongoing exposure to road spray, moisture, and salt air during towing and storage. Installation is done by mounting the carrier through four 6\/16 inch holes drilled into the trailer frame, giving it a fixed, secure attachment point rather than a slip-on or clamp-style fit. This makes it a good match for aluminum trailer owners who want their spare tire mounted directly to the frame rather than relying on a bumper mount, tongue mount, or U-bolt style carrier.\u003c\/p\u003e\u003cp\u003eAt 5.11 pounds, the carrier itself is lightweight enough to not add significant tongue or frame weight while still providing a durable mounting point for a spare wheel and tire. It is sold as the carrier hardware itself, designed to be paired with the trailer's existing spare wheel and tire.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86064\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spare Tire Carrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrailer Type:\u003c\/strong\u003e Aluminum (I-beam) trailers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Lug Pattern:\u003c\/strong\u003e 4-lug and 5-lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Holes:\u003c\/strong\u003e Four 6\/16 inch holes drilled into the trailer frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628860641\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat trailers is the Tie Down Engineering 86064 spare tire carrier designed for?\u003c\/strong\u003e Part number 86064 is designed for aluminum I-beam trailers, giving the spare tire a dedicated mounting point on the trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 86064 fit both 4-lug and 5-lug wheels?\u003c\/strong\u003e Yes, this carrier accommodates both 4-lug and 5-lug wheel patterns, so it works across different aluminum trailer wheel setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 86064 spare tire carrier mounted to the trailer?\u003c\/strong\u003e It mounts through four 6\/16 inch holes drilled into the I-beam trailer frame, giving it a fixed, through-bolted attachment rather than a clamp-on fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 86064 carrier made of?\u003c\/strong\u003e The carrier is galvanized, which protects it from rust and corrosion during towing and outdoor storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tie Down Engineering 86064 spare tire carrier weigh?\u003c\/strong\u003e The 86064 spare tire carrier weighs 5.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs drilling required to install the 86064 carrier?\u003c\/strong\u003e Yes, installation requires drilling four 6\/16 inch holes into the trailer frame to bolt the carrier in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is 86064 different from a U-bolt style spare tire carrier?\u003c\/strong\u003e Unlike a U-bolt style carrier that clamps around the trailer frame, the 86064 carrier is through-bolted directly into the I-beam frame via drilled holes, which is a different mounting method and a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this carrier work on a trailer that is not an aluminum I-beam design?\u003c\/strong\u003e The 86064 carrier is designed specifically for aluminum I-beam trailer frames; other trailer frame styles use different Tie Down Engineering carriers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Tie Down Engineering 86064 carrier?\u003c\/strong\u003e The 86064 listing covers the spare tire carrier unit itself, intended to be bolted to the trailer frame to hold a 4-lug or 5-lug spare wheel and tire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86064 carrier a genuine Tie Down Engineering part?\u003c\/strong\u003e Yes, 86064 is the manufacturer part number for this Tie Down Engineering spare tire carrier for aluminum trailers.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991690850523,"sku":"T-D-86064","price":48.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/86064__60789.1722380968.500.750.jpg?v=1785188937"},{"product_id":"tie-down-86079-spare-hub-and-tire-carrier-zinc-plated-steel-pre-greased-5-lug-hub-with-bearings","title":"Tie Down Engineering Spare Hub and Tire Carrier, Pre-Greased 5-Lug Hub, Fits 1.750 in., 1-1\/16 in. And 1-3\/8 in. Spindles (86079)","description":"\u003cp\u003eThe Tie Down Engineering Spare Hub and Tire Carrier (86079) mounts a spare trailer hub and tire together for secure, ready-to-go roadside storage. It includes a pre-greased 5-lug hub with bearings already installed, so there is no separate bearing pack or hub assembly to buy or grease before mounting. The hub fits 1.750 in., 1-1\/16 in., and 1-3\/8 in. Spindles, giving it broad compatibility across common trailer axle sizes. Construction is heavy-duty zinc-plated steel, which resists corrosion from road spray and marine\/trailer environments and holds up to repeated loading and unloading of a spare wheel and tire. A security hole is built into the carrier so an optional cable and lock can be run through it, discouraging theft of the spare while trailering. The carrier is sized to fit trailer frames up to 3 in. Wide and 4 in. High. Overall product dimensions are 16.25 x 7 x 7 inches, and the unit weighs 19 pounds as shipped. This is a straightforward bolt-on accessory for trailer owners who want a dedicated, mounted spare rather than a loose hub and tire rattling around in a truck bed or storage box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86079\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spare Hub and Tire Carrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub:\u003c\/strong\u003e Pre-greased 5-lug hub with bearings included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Fitment:\u003c\/strong\u003e 1.750 in., 1-1\/16 in., and 1-3\/8 in. Spindles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrailer Frame Fitment:\u003c\/strong\u003e Up to 3 in. Wide and 4 in. High\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecurity Feature:\u003c\/strong\u003e Security hole for optional cable and lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 16.25 x 7 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628860795\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle sizes does the Tie Down 86079 hub fit?\u003c\/strong\u003e The Tie Down Engineering 86079 spare hub fits 1.750 in., 1-1\/16 in., and 1-3\/8 in. Spindles, covering the most common trailer axle sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86079 come with the hub already assembled?\u003c\/strong\u003e Yes, the 86079 includes a pre-greased 5-lug hub with bearings already installed, so it is ready to mount without a separate bearing pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer frame does this tire carrier fit?\u003c\/strong\u003e It fits trailer frames up to 3 in. Wide and 4 in. High.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 86079 spare tire carrier made of?\u003c\/strong\u003e It is made of heavy-duty zinc-plated steel, which resists corrosion in outdoor and marine trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tie Down 86079 weigh?\u003c\/strong\u003e The complete Tie Down Engineering 86079 spare hub and tire carrier weighs 19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this carrier?\u003c\/strong\u003e The 86079 measures 16.25 x 7 x 7 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I lock my spare tire to this carrier?\u003c\/strong\u003e Yes, the 86079 has a built-in security hole that accepts an optional cable and lock to help deter theft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this carrier for a 4-lug or 5-lug wheel?\u003c\/strong\u003e The Tie Down 86079 uses a 5-lug hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86079 include the mounting hardware and bearings, or are they sold separately?\u003c\/strong\u003e The bearings are included and pre-installed in the pre-greased 5-lug hub on the 86079; no separate bearing purchase is needed for the hub itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86079 hub only, or does it include the carrier mount?\u003c\/strong\u003e It includes both: a pre-greased 5-lug hub with bearings and the carrier that mounts the spare hub and tire to the trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 86079?\u003c\/strong\u003e The UPC for the Tie Down Engineering Spare Hub and Tire Carrier, part number 86079, is 081628860795.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991692423387,"sku":"T-D-86079","price":193.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-86079-Spare-Hub__35210.1739477367.500.750.jpg?v=1785188313"},{"product_id":"tie-down-86098-galvanized-side-mount-spare-tire-carrier-adjustable-4-5-lug-boat-trailer-mount","title":"Tie Down Engineering Galvanized Side Mount Spare Tire Carrier, Fits 4 and 5-Lug Wheels","description":"\u003cp\u003eThis galvanized side mount spare tire carrier from Tie Down Engineering gives boat trailer owners a secure, corrosion-resistant place to store a spare wheel on the trailer tongue. It is built from extra heavy-duty welded steel and finished with a hot-dip galvanized coating that stands up to road spray, launch ramps, and saltwater exposure. The mount uses an adjustable bolt circle that fits most standard patterns, so it accommodates both 4-lug and 5-lug wheels up to 15 inches. A 5-1\/4 inch offset with a dip rise design lifts the spare for additional boat and ground clearance, keeping it out of the way during towing and launching. The carrier attaches to trailer tongues up to 3 inches wide by 4 inches high, covering a wide range of boat trailers. Carriage bolts and lug nuts are included, so no separate hardware purchase is needed to mount the spare wheel once the carrier is installed. The design is protected under US Patent #6,116,483. This carrier is the galvanized finish option; the same mount is also offered in zinc-plated and black powder coat finishes under different part numbers. It carries a 1 year limited warranty from Tie Down Engineering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86098\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon steel, welded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e U-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Compatibility:\u003c\/strong\u003e 4-lug and 5-lug wheels up to 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Circle:\u003c\/strong\u003e Adjustable, fits most standard patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset:\u003c\/strong\u003e 5-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrailer Tongue Fit:\u003c\/strong\u003e Up to 3 inches wide by 4 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 13.5 x 6 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.36 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628860986\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatent:\u003c\/strong\u003e US Patent #6,116,483\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carriage bolts and lug nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes does the Tie Down 86098 spare tire carrier fit?\u003c\/strong\u003e The Tie Down Engineering 86098 side mount carrier has an adjustable bolt circle that fits 4-lug and 5-lug wheels up to 15 inches, covering most standard trailer wheel patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer tongue does this carrier mount to?\u003c\/strong\u003e Part 86098 fits trailer tongues up to 3 inches wide by 4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86098 carrier galvanized?\u003c\/strong\u003e Yes, part number 86098 is the hot-dip galvanized finish version of this side mount spare tire carrier, offering corrosion resistance for marine and trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre other finishes available for this carrier?\u003c\/strong\u003e The same side mount design is also offered in zinc-plated and black powder coat finishes, each under its own part number; 86098 is specifically the galvanized version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the offset and clearance design of this mount?\u003c\/strong\u003e This carrier has a 5-1\/4 inch offset with a dip rise design that adds boat and ground clearance for the mounted spare wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tie Down 86098 made from?\u003c\/strong\u003e It is constructed from extra heavy-duty welded steel, then hot-dip galvanized for corrosion protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the carrier include mounting hardware?\u003c\/strong\u003e Carriage bolts and lug nuts are included with part 86098, so no additional hardware is needed to install a spare wheel on the mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of this spare tire carrier?\u003c\/strong\u003e The 86098 side mount carrier measures 13.5 x 6 x 6 inches and weighs 6.36 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Tie Down 86098?\u003c\/strong\u003e Tie Down Engineering backs the 86098 spare tire carrier with a 1 year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this carrier patented?\u003c\/strong\u003e Yes, the adjustable bolt circle design of the 86098 side mount carrier is protected under US Patent #6,116,483.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991693701339,"sku":"T-D-86098","price":40.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/86098__41158.1722495491.500.750.jpg?v=1785189033"},{"product_id":"tie-down-engineering-86264-tread-aluminum-trailer-fender-8-inch-wheel-size","title":"Tie Down Engineering 86264 Tread Aluminum Trailer Fender, 8 Inch Wheel Size","description":"\u003cp\u003eThe Tie Down Engineering 86264 is a single trailer fender built for boat and utility trailers running an 8 inch wheel. It is constructed from 12-gauge (.08 inch) tread aluminum, giving it a durable, corrosion-resistant profile that stands up to road spray, debris, and marine environments without the weight penalty of heavier gauge steel fenders. The fender measures 7 inches wide by 20 inches long by 6 inches tall, sized to shield an 8 inch wheel and tire assembly from impacts, road grime, and general wear.\u003c\/p\u003e\u003cp\u003eThis fender is sold as a single unit and does not include mounting brackets, so it can be paired with whatever bracket style best matches your trailer frame and mounting angle. The aluminum panel is drillable, which allows custom mounting hole placement rather than being locked into a fixed bracket pattern. This makes the 86264 a straightforward option for replacing a damaged or rusted-out fender, or for building out a trailer fender setup from scratch. The part number 86264 corresponds specifically to the 8 inch wheel size version; the same fender family is also offered in larger sizes for 12 inch, 13 inch, and 14-15 inch wheels under separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86264\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 12-gauge (.08 inch) tread aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x L x H):\u003c\/strong\u003e 7 inches x 20 inches x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Not included; drillable for custom mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Style:\u003c\/strong\u003e Single fender, sold individually\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel size does the Tie Down Engineering 86264 fender fit?\u003c\/strong\u003e The 86264 is sized for an 8 inch wheel. It is part of a fender family that also covers 12 inch, 13 inch, and 14-15 inch wheels under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 86264 fender made from?\u003c\/strong\u003e It is built from 12-gauge (.08 inch) tread aluminum, chosen for durability and resistance to corrosion in wet and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86264 fender come with mounting brackets?\u003c\/strong\u003e No, the Tie Down Engineering 86264 is sold without brackets so you can select mounting hardware that fits your specific trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 86264 trailer fender?\u003c\/strong\u003e It measures 7 inches wide by 20 inches long by 6 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86264 fender weigh?\u003c\/strong\u003e The Tie Down Engineering 86264 weighs 3.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 86264 fender be drilled for custom mounting?\u003c\/strong\u003e Yes, the tread aluminum construction of the 86264 is drillable, allowing custom hole placement for mounting instead of a fixed bracket pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86264 sold as a single fender or a pair?\u003c\/strong\u003e The 86264 is sold as one single fender, not a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 86264 and the 86265 fender?\u003c\/strong\u003e The 86264 is sized for an 8 inch wheel, while the 86265 is the version of the same fender family sized for a 12 inch wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86264 fender suitable for boat trailers?\u003c\/strong\u003e Yes, the Tie Down Engineering 86264 tread aluminum fender is designed for boat and utility trailers with an 8 inch wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes are available in this fender line besides the 86264?\u003c\/strong\u003e The same tread aluminum fender family includes the 86265 for 12 inch wheels, the 86266 for 13 inch wheels, and the 86267 for 14-15 inch wheels.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657426139,"sku":"T-D-86264","price":18.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61YU1nkUN0L_e68dad77-5ddb-455f-a81f-275bf60d50f5.jpg?v=1785330997"},{"product_id":"tie-down-engineering-square-u-bolt-1-2-in-13-x-3-1-16-in-x-3-13-16-in-zinc-plated-part-86222","title":"Tie Down Engineering Square U-Bolt 1\/2 in.-13 x 3-1\/16 in. X 3-13\/16 in., Zinc Plated, Part 86222","description":"\u003cp\u003eThe Tie Down Engineering 86222 is a square-bend U-bolt built for mounting trailer springs, brackets, and axle hardware to 1-1\/2 inch square frame tubing. It is manufactured with a zinc-plated finish that resists corrosion during everyday road and marine-trailer exposure, keeping the threads and bend clean for reliable installation and future removal. The U-bolt has a square shape to match flat-sided frame stock, with 1\/2 in.-13 threaded ends sized to accept standard 1\/2 inch nuts and washers. Overall it measures 1\/2 in. X 3-1\/16 in. X 3-13\/16 in., a compact size intended for spring plates, roller brackets, and similar square-tube mounting points on boat trailers and utility trailers. The finish is gray zinc plating over the fastener body, with a right-hand thread standard to U.S. Hardware. This listing is for a single U-bolt (each); Tie Down also offers this same 1-1\/2 inch square size as a matched pair under a different part number, and a round-shape version for round frame tubing, for buyers who need an alternate configuration. Because it is a precision-bent mounting fastener rather than a universal bolt, matching the frame size and shape (square vs. Round) is important to get a proper, snug fit without stressing the bend.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86222\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Size:\u003c\/strong\u003e 1-1\/2 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 in.-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3-1\/16 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3-13\/16 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e U-Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Style:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade:\u003c\/strong\u003e Grade 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 (Each)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628862225\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSized for 1-1\/2 inch square trailer frame or axle tubing, with 1\/2 in.-13 threaded ends for securing spring plates, roller brackets, and similar square-mount hardware.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size frame does the Tie Down 86222 U-bolt fit?\u003c\/strong\u003e It is sized for 1-1\/2 inch square trailer frame or axle tubing, matching the square bend of part 86222.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this U-bolt sold as a single piece or a pair?\u003c\/strong\u003e Part 86222 is sold individually (each). Tie Down Engineering also offers the same 1-1\/2 inch square size as a matched pair under a separate part number for buyers who need two at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 86222 U-bolt use?\u003c\/strong\u003e The threaded ends are 1\/2 in.-13, sized for standard 1\/2 inch nuts and washers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this U-bolt?\u003c\/strong\u003e Tie Down 86222 measures 1\/2 in. X 3-1\/16 in. X 3-13\/16 in. Overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 86222 U-bolt have?\u003c\/strong\u003e It has a zinc-plated finish in gray, applied for corrosion resistance on the fastener body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86222 U-bolt fit round trailer frame tubing?\u003c\/strong\u003e No, this is a square-shaped U-bolt for square frame tubing. Tie Down offers a round-shape version, part 86226, for round frame applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tie Down 86222 U-bolt weigh?\u003c\/strong\u003e It weighs 0.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86222 U-bolt right-hand or left-hand threaded?\u003c\/strong\u003e It uses a standard right-hand thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer grade of this U-bolt?\u003c\/strong\u003e Tie Down rates the 86222 U-bolt as Grade 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 86222 U-bolt come with?\u003c\/strong\u003e This listing includes the U-bolt itself (each); it does not include a separate hardware kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 86222 U-bolt be used for spring plate or roller bracket mounting?\u003c\/strong\u003e Yes, its 1-1\/2 inch square sizing and 1\/2 in.-13 threads suit spring plate, roller bracket, and similar square-tube mounting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 86222 the same as the 86214 U-bolt?\u003c\/strong\u003e No, 86214 and 86222 are separate part numbers within Tie Down's square U-bolt line for the same 1-1\/2 inch square frame size; confirm dimensions before substituting one for the other.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657393371,"sku":"T-D-86222","price":7.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61iZu7dGfVL.jpg?v=1785331045"},{"product_id":"tie-down-86223-galvanized-square-u-bolt-1-2-in-13-thread-fits-2-in-square-trailer-frame","title":"Tie Down 86223 Galvanized Square U-Bolt, 1\/2 in.-13 Thread, Fits 2 in. Square Trailer Frame","description":"\u003cp\u003eThe Tie Down 86223 is a galvanized square U-bolt sized to fit 2 in. Square trailer frame tubing, sold individually (each). It is built with a 1\/2 in.-13 thread and measures 2-1\/8 in. Wide by 4 in. Long, making it a direct fit for axle, leaf spring, and frame mounting applications that call for this thread pitch and square bend profile. The galvanized finish provides corrosion resistance for trailers used in wet, road-salt, or marine-adjacent environments where rust is a constant concern.\u003c\/p\u003e\u003cp\u003eSquare U-bolts like the 86223 are commonly used to clamp leaf springs to trailer axles, secure roller brackets and bunk brackets to a square trailer frame, or mount other hardware where a square-bend U-bolt is required rather than a round one. Because it is sold as a single unit, buyers needing a matched pair for a bracket or spring installation should order two, or select Tie Down's pre-packaged pair option for the same dimensions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86223\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 in.-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-1\/8 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Frame Size:\u003c\/strong\u003e 2 in. Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 (Each)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628862232\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2 in. Square trailer frame or axle tubing. Not intended for round tubing; a round-tube version of this U-bolt is offered under different part numbers.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size frame does the Tie Down 86223 U-bolt fit?\u003c\/strong\u003e The Tie Down 86223 is sized for 2 in. Square trailer frame or axle tubing. It is a square-bend U-bolt, not a round one, so it is meant for square tube applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the 86223 U-bolt?\u003c\/strong\u003e It has a 1\/2 in.-13 thread, meaning a 1\/2 inch diameter rod with 13 threads per inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of part number 86223?\u003c\/strong\u003e The 86223 U-bolt measures 2-1\/8 in. Wide by 4 in. Long, with a 1\/2 in.-13 threaded rod.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86223 U-bolt sold as a single unit or a pair?\u003c\/strong\u003e It is sold each, meaning one U-bolt per order. Buyers who need two matching U-bolts for a spring or bracket installation should order two units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Tie Down 86223 have?\u003c\/strong\u003e The 86223 U-bolt has a galvanized finish for corrosion resistance in wet or road-salt environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86223 U-bolt weigh?\u003c\/strong\u003e The Tie Down 86223 weighs 0.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a zinc-plated version of this same U-bolt?\u003c\/strong\u003e Yes, Tie Down offers the same 2 in. Square, 1\/2 in.-13 thread U-bolt in a zinc-plated finish under part number 86215.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Tie Down make a two-pack of this U-bolt?\u003c\/strong\u003e Yes, the same 2 in. Square U-bolt dimensions are also available as a pair under part number 86204.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 86223 U-bolt?\u003c\/strong\u003e The 86223 is the U-bolt itself, sold each; it does not include mounting hardware such as nuts or washers in this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86223 U-bolt used for leaf spring or axle mounting?\u003c\/strong\u003e Square U-bolts like the 86223 are commonly used to clamp leaf springs to a trailer axle or to secure brackets to a 2 in. Square trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tie Down 86223 U-bolt made from?\u003c\/strong\u003e It is made from steel with a galvanized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a round-tube version of this U-bolt available?\u003c\/strong\u003e Yes, for round 2 in. Tube frames Tie Down offers equivalent U-bolts under part numbers 86217 and 86225 instead of the square-bend 86223.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657557211,"sku":"T-D-86223","price":7.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61iZu7dGfVL_0dc2da16-bbfc-4110-b73e-c9ad545355e5.jpg?v=1785331045"},{"product_id":"tie-down-engineering-86260-offset-fender-brackets-for-8-and-12-inch-metal-fenders-galvanized-pair","title":"Tie Down Engineering 86260 Offset Fender Brackets for 8 and 12 Inch Metal Fenders, Galvanized, Pair","description":"\u003cp\u003eThe Tie Down Engineering 86260 Offset Fender Brackets are galvanized steel mounting brackets built for 8 inch and 12 inch metal trailer fenders. They mount to the trailer side frame in an offset configuration, positioning the fender bracket away from the frame rail to match the profile of metal fender designs that require offset clearance rather than a flush mount. Sold as a pair, these brackets give you both mounting points needed to secure one fender to your boat trailer.\u003c\/p\u003e\u003cp\u003eConstructed from galvanized metal, the 86260 brackets are built to resist corrosion in the marine and road-salt environments that boat trailers are regularly exposed to, helping the mounting hardware hold up over years of launching, towing, and storage. The offset design creates a secure, stable attachment point that keeps the fender aligned and firmly in place during transport, reducing stress on the fender and preventing the rattling or shifting that can lead to fender damage over time.\u003c\/p\u003e\u003cp\u003eThese brackets are intended for 8 inch and 12 inch metal fenders specifically. If your trailer uses plastic fenders or requires a flush mounting style instead of offset, a different Tie Down Engineering bracket is the correct fit, so confirm your fender type and mounting style before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86260\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Offset Fender Mounting Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Fender Size:\u003c\/strong\u003e 8 inches and 12 inches (metal fenders)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Offset, mounts to trailer side frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10.4 x 9.4 x 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Sold in pairs (2 brackets)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 inch metal trailer fenders\u003c\/li\u003e\n\u003cli\u003e12 inch metal trailer fenders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size fenders does the Tie Down Engineering 86260 bracket fit?\u003c\/strong\u003e The 86260 offset fender bracket is designed for 8 inch and 12 inch metal trailer fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86260 bracket sold individually or in pairs?\u003c\/strong\u003e It is sold in pairs, giving you both offset brackets needed to mount one fender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 86260 fender bracket made from?\u003c\/strong\u003e Galvanized steel is used for the 86260 bracket, which provides corrosion resistance in wet and road-salt conditions common to trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does offset mounting mean for the 86260 bracket?\u003c\/strong\u003e Offset mounting means the bracket attaches to the trailer side frame in a configuration that positions the fender away from the frame rail, rather than sitting flush against it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 86260 bracket work with plastic fenders?\u003c\/strong\u003e No, the 86260 is designed for metal fenders in the 8 inch and 12 inch sizes; plastic fenders require a different Tie Down Engineering bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Tie Down Engineering 86260 bracket?\u003c\/strong\u003e The 86260 bracket has a gray galvanized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 86260 fender bracket?\u003c\/strong\u003e Each 86260 bracket measures 10.4 x 9.4 x 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86260 fender bracket set weigh?\u003c\/strong\u003e The pair of 86260 brackets weighs 3.37 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 86260 offset bracket be used on either side of the trailer?\u003c\/strong\u003e Yes, since it comes as a pair and mounts to the trailer side frame, the 86260 brackets can be installed on both sides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 86260 offset bracket and a flush-mount fender bracket?\u003c\/strong\u003e The 86260 is an offset-style bracket that positions the fender away from the trailer frame rail, while a flush-mount bracket seats the fender directly against the frame; both are used for 8 inch and 12 inch metal fenders but suit different fender profiles.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657524443,"sku":"T-D-86260","price":27.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81Ki4_9quBL_6197a876-d8f9-49fe-b26b-fa15ddb6dc06.jpg?v=1785330964"},{"product_id":"tie-down-engineering-round-u-bolt-86225-1-2-inch-13-x-2-3-8-x-5-3-8-inch-galvanized-fits-2-inch-diameter-tube","title":"Tie Down Engineering Round U-Bolt 86225, 1\/2 Inch-13 x 2-3\/8 x 5-3\/8 Inch, Galvanized, Fits 2 Inch Diameter Tube","description":"\u003cp\u003eThe Tie Down Engineering 86225 is a round U-bolt sized to fit over 2 inch diameter tube or pipe, used for mounting rollers, brackets, and other hardware to a trailer frame. It is manufactured with a 1\/2 inch-13 thread, a 2-3\/8 inch leg spacing, and a 5-3\/8 inch overall length, and is finished with a hot-dipped galvanized coating for corrosion resistance in wet and marine trailer environments. Each U-bolt ships complete with matching flat washers and nylon lock nuts, so no separate hardware purchase is needed to complete the mounting job.\u003c\/p\u003e\u003cp\u003eThis is a genuine Tie Down Engineering part, sold individually, and is built to the same round-bend, threaded-leg design used across the brand's trailer roller bracket hardware line. The galvanized finish resists rust from trailer immersion during boat loading and towing, making it a durable choice for bunk brackets, roller brackets, and other frame-mounted trailer hardware that clamps around 2 inch tube.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86225\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Tube\/Pipe Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg Spacing:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 5-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-dipped galvanized (zinc)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included:\u003c\/strong\u003e Flat washers and nylon lock nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 U-bolt with hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.83 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.25 x 0.5 x 9.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628862256\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRound U-bolt sized for 2 inch diameter tube or pipe, used for mounting trailer roller brackets and similar frame hardware.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size tube or pipe does the Tie Down Engineering 86225 U-bolt fit?\u003c\/strong\u003e The 86225 is a round U-bolt sized to fit over 2 inch diameter tube or pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the Tie Down Engineering 86225 U-bolt?\u003c\/strong\u003e It has a 1\/2 inch-13 thread on both legs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the leg spacing and overall length of the 86225 U-bolt?\u003c\/strong\u003e The 86225 has a 2-3\/8 inch leg spacing and a 5-3\/8 inch overall length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Tie Down Engineering 86225 come with nuts and washers?\u003c\/strong\u003e Yes, each 86225 U-bolt ships with matching flat washers and nylon lock nuts included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 86225 U-bolt made of, and what finish does it have?\u003c\/strong\u003e It is made of galvanized steel with a hot-dipped galvanized zinc finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86225 U-bolt genuine Tie Down Engineering hardware or an aftermarket replacement?\u003c\/strong\u003e The 86225 is a genuine Tie Down Engineering part, not an aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 86225 U-bolt used for?\u003c\/strong\u003e It is used for mounting brackets, such as trailer roller brackets, to a trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tie Down Engineering 86225 U-bolt weigh?\u003c\/strong\u003e The 86225 weighs 0.83 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tie Down Engineering 86225 sold as a single U-bolt or in a set?\u003c\/strong\u003e The 86225 is sold individually, with a package quantity of one U-bolt plus its washers and nylon lock nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the galvanized finish on the 86225 U-bolt hold up to saltwater trailer use?\u003c\/strong\u003e Yes, the hot-dipped galvanized zinc finish on the 86225 is designed to resist corrosion from repeated water exposure during trailer loading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86225 U-bolt round or square?\u003c\/strong\u003e The 86225 is a round-shaped U-bolt, as opposed to Tie Down Engineering's square U-bolt variants.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657721051,"sku":"T-D-86225","price":9.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61vSp_Ts8kL.jpg?v=1785331045"},{"product_id":"tie-down-trailer-fender-86265-13-in-wheel-size-galvanized-steel-8-in-x-27-5-in-x-11-in","title":"Tie Down Trailer Fender 86265, 13 in. Wheel Size, Galvanized Steel, 8 in. X 27.5 in. X 11 in.","description":"\u003cp\u003eThe Tie Down trailer fender, part number 86265, is a single-axle replacement fender built to shield your trailer's tire and wheel assembly from road debris, mud, and impact damage. It is sized for a 13 in. Wheel and measures 8 in. X 27.5 in. X 11 in. Overall, making it a direct fit for trailers running that wheel size that need to replace a cracked, rusted, or missing fender. The fender is constructed from 16 gauge galvanized steel finished in silver, giving it strong corrosion resistance for continued exposure to road spray, launch ramps, and saltwater environments. Its alloy steel build holds its shape under repeated impact while the galvanized coating helps prevent rust from forming at seams and edges over time.\u003c\/p\u003e\u003cp\u003eThis fender ships as a single replacement unit and does not include mounting brackets or hardware, so have brackets on hand (or reuse your existing ones) before installation. It is designed as a universal-fit trailer fender rather than a vehicle-specific part, so any single-axle trailer built around a 13 in. Wheel is a candidate as long as the mounting width and hardware match up.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86265\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size:\u003c\/strong\u003e 13 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x L x H):\u003c\/strong\u003e 8 in. X 27.5 in. X 11 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 16 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.88 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Brackets:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSingle-axle trailers using a 13 in. Wheel\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel size does the Tie Down 86265 fender fit?\u003c\/strong\u003e The Tie Down 86265 trailer fender is sized for a 13 in. Wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e Part number 86265 measures 8 in. Wide x 27.5 in. Long x 11 in. High.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86265 fender come with mounting brackets?\u003c\/strong\u003e No, this fender ships without mounting brackets or hardware, so you will need to have compatible brackets on hand for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Tie Down 86265 fender made from?\u003c\/strong\u003e It is made from 16 gauge galvanized alloy steel, giving it a silver finish and strong resistance to corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single fender or a pair?\u003c\/strong\u003e The 86265 is sold as a single replacement fender, with one fender included per order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender fit a 12 in. Wheel trailer?\u003c\/strong\u003e No, the 86265 is built for a 13 in. Wheel; a different Tie Down part number covers 12 in. Wheel assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tie Down 86265 fender galvanized?\u003c\/strong\u003e Yes, it has a galvanized steel exterior finish for added rust and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86265 fender weigh?\u003c\/strong\u003e This trailer fender weighs 3.88 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86265 a universal-fit fender?\u003c\/strong\u003e Yes, Tie Down lists the 86265 fender as a universal fit for single-axle trailers using a 13 in. Wheel, rather than being restricted to one specific trailer make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 86265 fender?\u003c\/strong\u003e It has a silver galvanized steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 86265 fender myself?\u003c\/strong\u003e Yes, it is designed as a bolt-on replacement fender, though since brackets are not included you will need appropriate mounting hardware to complete installation.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657688283,"sku":"T-D-86265","price":27.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61uK_mghKmL_949e2e20-2abe-45e6-91c1-3b932b36c2b3.jpg?v=1785331002"},{"product_id":"tie-down-engineering-86208-square-u-bolt-3-8-in-16-x-4-in-1-3-4-in-width-pair","title":"Tie Down Engineering 86208 Square U-Bolt, 3\/8 in.-16 x 4 in., 1-3\/4 in. Width, Pair","description":"\u003cp\u003eThe Tie Down Engineering 86208 is a square U-bolt sold as a pair, built for trailer roller bracket and axle mounting applications. Each U-bolt measures 4 inches in length with a 1-3\/4 inch width across the square bend, and is threaded 3\/8 in.-16 on both ends to accept standard hex nuts. Constructed from alloy steel rated to Grade 8.8 hardness, the 86208 is engineered to handle the repeated load and vibration stress common on boat trailers, utility trailers, and roller bracket assemblies. The threads are cut Unified National Coarse (UNC), right-hand, full thread, class 3A, so they mate cleanly with standard 3\/8 in. Hardware. A matte or brushed finish resists surface wear during installation and field use. Because this is a square-bend U-bolt rather than a round-bend, it is intended for square tube or square bracket stock rather than round pipe or round axle housings. The pair is sold together so both mounting points on a bracket or roller assembly can be replaced or upgraded at the same time with matching hardware. This part carries a full manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86208\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1-3\/4 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8 in.-16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e UNC (Unified National Coarse), Right Hand, Full Thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Class:\u003c\/strong\u003e 3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness Grade:\u003c\/strong\u003e Grade 8.8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte or Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.72 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e Pair (2 U-Bolts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a square-bend U-bolt intended for square tube or square bracket mounting; no specific make, model, or year fitment is specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Tie Down Engineering 86208 U-bolt?\u003c\/strong\u003e The 86208 measures 4 inches in length by 1-3\/4 inches in width, with 3\/8 in.-16 threads on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86208 sold as a single U-bolt or a pair?\u003c\/strong\u003e The 86208 is sold as a pair, giving you two matching square U-bolts per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is this U-bolt?\u003c\/strong\u003e It is a square-bend U-bolt, designed to mount onto square tube or square bracket stock rather than round pipe or round axle housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 86208 U-bolt made from?\u003c\/strong\u003e The 86208 is made from alloy steel rated to Grade 8.8 hardness for load-bearing trailer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size and type does the 86208 use?\u003c\/strong\u003e It uses a 3\/8 in.-16 UNC thread, right-hand and fully threaded, in thread class 3A, so it accepts standard 3\/8 in. Hex nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86208 weigh?\u003c\/strong\u003e The Tie Down Engineering 86208 pair weighs 0.72 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 86208 U-bolt have?\u003c\/strong\u003e It has a matte or brushed finish on the alloy steel surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 86208 U-bolt typically used for?\u003c\/strong\u003e It is used for trailer roller bracket and square-mount hardware applications where a 4 inch by 1-3\/4 inch square U-bolt is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need additional hardware to install the 86208?\u003c\/strong\u003e The 86208 pair includes the two U-bolts only; matching 3\/8 in.-16 hex nuts are needed to complete the mounting since the U-bolts thread onto standard 3\/8 in. Hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86208 fit round axles or round pipe?\u003c\/strong\u003e No, the 86208 is a square-bend U-bolt made for square tube or bracket stock, not round pipe or round axle housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tie Down Engineering 86208 genuine manufacturer hardware?\u003c\/strong\u003e Yes, the 86208 is a genuine Tie Down Engineering part backed by a full manufacturer's warranty.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657589979,"sku":"T-D-86208","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31tyfvOHoRL.jpg?v=1785331010"},{"product_id":"tie-down-engineering-86206-square-u-bolt-1-2-inch-13-x-4-inch-painted-steel-pair","title":"Tie Down Engineering 86206 Square U-Bolt, 1\/2 inch-13 x 4 inch, Painted Steel, Pair","description":"\u003cp\u003eThe Tie Down Engineering 86206 is a square-bend U-bolt used to mount roller brackets and other trailer hardware to a trailer frame or axle. It is sold as a matched pair, giving you both U-bolts needed for a single mounting point in one purchase. Each U-bolt is threaded 1\/2 inch-13 and measures approximately 3-1\/8 inches wide by 4 inches long, with a square bend shape that seats flush against square-tube trailer frame members for a secure, non-slip fit.\u003c\/p\u003e\u003cp\u003eConstruction is Grade 2 steel with a painted exterior finish for corrosion resistance in marine and trailer environments. The square profile distinguishes it from round-bend U-bolts and is intended for applications where the mounting surface is a square or rectangular tube rather than a round pipe or rod. This part is commonly used when replacing worn, rusted, or bent U-bolts on boat trailer roller brackets, bunk brackets, and similar frame-mounted hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade:\u003c\/strong\u003e Grade 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Locknut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the Tie Down Engineering 86206 U-bolt?\u003c\/strong\u003e The 86206 U-bolt has a 1\/2 inch-13 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 86206 U-bolt?\u003c\/strong\u003e It measures approximately 3-1\/8 inches wide by 4 inches long, with a square bend.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many U-bolts come in a package?\u003c\/strong\u003e The 86206 is sold as a pair, so one package includes two square U-bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86206 a square or round U-bolt?\u003c\/strong\u003e It is a square U-bolt, made to fit flush against square-tube frame or bracket surfaces rather than round pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 86206 U-bolt made from?\u003c\/strong\u003e The 86206 is a Grade 2 steel U-bolt with a painted exterior finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 86206 U-bolt typically used for?\u003c\/strong\u003e It is used to mount roller brackets and similar trailer hardware to a square-tube trailer frame or axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86206 come with locknuts?\u003c\/strong\u003e Yes, the Tie Down Engineering 86206 uses a locknut fastener type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86206 U-bolt pair weigh?\u003c\/strong\u003e The pair of 86206 U-bolts weighs 1.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 86206 and the 86207 U-bolt?\u003c\/strong\u003e The 86206 and 86207 are both square U-bolts from Tie Down Engineering but are different part numbers with different dimensions, so they are not interchangeable; confirm the exact width and length needed before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 86206 fit a round trailer frame tube?\u003c\/strong\u003e No, the 86206 has a square bend and is designed for square-tube mounting surfaces, not round pipe.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657753819,"sku":"T-D-86206","price":10.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61C_Xi10_L_c0a1545d-8b0d-402f-95c9-b77032d3eda0.jpg?v=1785331009"},{"product_id":"tie-down-engineering-86266-galvanized-steel-trailer-fender-fits-14-15-inch-wheels","title":"Tie Down Engineering 86266 Galvanized Steel Trailer Fender, Fits 14-15 Inch Wheels","description":"\u003cp\u003eThis Tie Down Engineering trailer fender, part number 86266, is a single-axle replacement fender built for boat and utility trailers running 14-15 inch wheels. It is constructed from galvanized steel for corrosion resistance and long-term durability in wet, roadside, and marine-adjacent conditions, making it a practical replacement for a fender that has rusted through, cracked, or been damaged in transit. The fender measures 9 inches wide by 31.5 inches long by 13 inches tall, giving full coverage over the tire and wheel assembly to protect against road spray, debris, and impact while towing.\u003c\/p\u003e\u003cp\u003eThe 86266 fender is sold as a single unit and does not include mounting brackets, so it is intended for installers who already have brackets on hand or are sourcing them separately. Its finish is silver galvanized steel, matching the standard appearance used across Tie Down trailer fenders. Because it is designed around a 14-15 inch wheel diameter, it is best suited to trailers running tires in that size range; installers should confirm wheel diameter before ordering to ensure a proper fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size:\u003c\/strong\u003e 14-15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x L x H):\u003c\/strong\u003e 9 inches x 31.5 inches x 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 16 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Brackets:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 1 fender\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer wheels sized 14 to 15 inches. Suitable for boat and utility trailers.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel size does the Tie Down 86266 fender fit?\u003c\/strong\u003e Tie Down Engineering part 86266 is sized for trailer wheels measuring 14 to 15 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting brackets included with this fender?\u003c\/strong\u003e No, the 86266 fender is sold as the fender only; mounting brackets are not included and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 86266 fender made from?\u003c\/strong\u003e It is made from 16 gauge galvanized steel, chosen for corrosion resistance in outdoor and roadside trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this fender?\u003c\/strong\u003e The Tie Down 86266 measures 9 inches wide by 31.5 inches long by 13 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86266 trailer fender weigh?\u003c\/strong\u003e This fender weighs 6.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender sold as a single unit or a pair?\u003c\/strong\u003e Part number 86266 is sold as a single fender, not a pair, so order two if both sides of the trailer need replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 86266 fender have?\u003c\/strong\u003e It has a silver galvanized steel finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender work on a boat trailer as well as a utility trailer?\u003c\/strong\u003e Yes, the Tie Down 86266 is a universal-fit fender suitable for both boat trailers and utility trailers with matching wheel size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 86266 compare to Tie Down's tread aluminum fenders?\u003c\/strong\u003e The 86266 is a galvanized steel fender for 14-15 inch wheels, while Tie Down's tread aluminum fenders are built from 12-gauge aluminum for 13-15 inch wheels; the steel version offers a heavier-gauge, drill-free painted finish instead of aluminum construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Tie Down Engineering part or an aftermarket copy?\u003c\/strong\u003e This is a genuine Tie Down Engineering fender, part number 86266, not a third-party aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this fender?\u003c\/strong\u003e The package includes one 86266 fender only; no mounting brackets or hardware are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace a trailer fender like the 86266?\u003c\/strong\u003e Trailer fenders like the 86266 are typically replaced after rust damage, cracking, or impact from road debris compromises the original fender's coverage and protection.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657786587,"sku":"T-D-86266","price":32.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61IlCVxofGL.jpg?v=1785331069"},{"product_id":"tie-down-86267-tread-aluminum-trailer-fender-14-15-inch-wheel-size","title":"Tie Down 86267 Tread Aluminum Trailer Fender, 14-15 Inch Wheel Size","description":"\u003cp\u003eThe Tie Down 86267 is a tread aluminum trailer fender built to cover a single 14 inch to 15 inch trailer wheel and tire. It is constructed from 12-gauge (.08 inch) tread aluminum for a durable, corrosion-resistant cover that stands up to road spray, salt water, and general trailering wear. The fender has a drillable design, so it can be custom-mounted to a wide range of trailer frames and fender brackets rather than being locked into one bolt pattern. It measures 9 inches wide by 31.5 inches long by 13 inches high, giving full coverage over the wheel and tire on single-axle boat, utility, and cargo trailers running 14 inch to 15 inch wheels.\u003c\/p\u003e\u003cp\u003eThe 86267 is sold as a single fender and does not include mounting brackets, so brackets or fender mounting hardware must be purchased separately to complete the installation. Its tread aluminum construction combines light weight with rust resistance, making it a common upgrade over painted steel fenders on trailers that see regular exposure to water and road salt.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86267\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tread Aluminum Fender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tread Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 12-gauge (.08 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size:\u003c\/strong\u003e 14 inch - 15 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x L x H):\u003c\/strong\u003e 9 inches x 31.5 inches x 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Brackets:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Drillable for custom mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold individually (1 fender)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits single trailer wheels sized 14 inch to 15 inch.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel size does the Tie Down 86267 fender fit?\u003c\/strong\u003e The Tie Down 86267 is sized for a single trailer wheel and tire in the 14 inch to 15 inch range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting brackets included with this fender?\u003c\/strong\u003e No, the 86267 tread aluminum fender is sold without mounting brackets, so brackets must be purchased separately to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 86267 fender made from?\u003c\/strong\u003e It is made from 12-gauge (.08 inch) tread aluminum, giving it a durable, corrosion-resistant finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Tie Down 86267?\u003c\/strong\u003e This fender measures 9 inches wide by 31.5 inches long by 13 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86267 fender weigh?\u003c\/strong\u003e It weighs 8.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be custom mounted to my trailer frame?\u003c\/strong\u003e Yes, the Tie Down 86267 has a drillable design that allows it to be drilled and custom-mounted to a variety of trailer frames and bracket setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86267 come as a single fender or a pair?\u003c\/strong\u003e It is sold individually as one fender, covering a single wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs aluminum a good choice for a trailer fender?\u003c\/strong\u003e Tread aluminum resists corrosion from road spray and salt water better than uncoated steel while staying lightweight, which is why the 86267 is built from 12-gauge tread aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 86267 fit a tandem-axle trailer?\u003c\/strong\u003e The 86267 is a single fender sized for one 14 inch to 15 inch wheel; a tandem-axle trailer with two wheels per side would need two fenders, purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Tie Down 86267 suitable for boat trailers?\u003c\/strong\u003e Yes, this tread aluminum fender is commonly used on single-axle boat, utility, and cargo trailers running 14 inch to 15 inch wheels.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657819355,"sku":"T-D-86267","price":80.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51Unk-uCHvL.jpg?v=1785331070"},{"product_id":"tie-down-engineering-86268-adjustable-tandem-trailer-fender-60-to-72-inch-silver-aluminum","title":"Tie Down Engineering 86268 Adjustable Tandem Trailer Fender, 60 to 72 Inch, Silver Aluminum","description":"\u003cp\u003eThe Tie Down Engineering 86268 is an adjustable tandem-axle trailer fender built to protect dual-axle boat trailers from road debris, spray, and thrown gravel. It is constructed from.080 aluminum Tread Brite for a durable, corrosion-resistant, brushed silver finish that holds up to marine and roadside conditions. The fender measures 9 inches wide by 16 inches high and adjusts across a 60 inch to 72 inch range, allowing it to accommodate almost all dual-axle trailer configurations rather than a single fixed track width. This adjustability means one fender covers a wide range of tandem-axle trailer setups, simplifying replacement without requiring an exact width match to the original equipment. It is designed as a universal-fit rear fender, and buyers should check their trailer's axle spacing and mounting hardware to confirm proper fit before installation. The lightweight aluminum construction keeps unsprung weight low compared to steel fenders while still standing up to years of towing use. This fender is sold individually and is intended for the regular (non-teardrop) tandem fender profile.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86268\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e.080 Aluminum Tread Brite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Range:\u003c\/strong\u003e 60 inches to 72 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit, dual-axle (tandem) trailers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628862683\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for most tandem (dual-axle) trailers; adjusts from 60 inches to 72 inches to match axle spacing\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat trailers does the Tie Down Engineering 86268 fender fit?\u003c\/strong\u003e The 86268 is a universal-fit fender for dual-axle (tandem) trailers, adjusting from 60 inches to 72 inches to accommodate almost all tandem-axle configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 86268 fender made of?\u003c\/strong\u003e.080 aluminum Tread Brite gives the 86268 fender a durable, brushed silver finish that resists corrosion in marine and road environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Tie Down Engineering 86268 fender?\u003c\/strong\u003e It measures 9 inches wide by 16 inches high, with an adjustable length of 60 inches to 72 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86268 fender weigh?\u003c\/strong\u003e The 86268 adjustable tandem fender weighs 12.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86268 a single fender or a pair?\u003c\/strong\u003e Part number 86268 is sold as a single adjustable tandem fender, not a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86268 fender fit single-axle trailers?\u003c\/strong\u003e No, the 86268 is designed for dual-axle (tandem) trailers; it is not intended for single-axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 86268 and the teardrop-style tandem fender?\u003c\/strong\u003e The 86268 is the regular adjustable tandem fender profile, while Tie Down Engineering's teardrop-style tandem fender is a separate part number with a rounded teardrop shape; both share similar.080 aluminum Tread Brite construction and the 60 inch to 72 inch adjustable range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the 86268 fender come in?\u003c\/strong\u003e The 86268 fender has a brushed silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 86268 fender be mounted at the rear of a trailer?\u003c\/strong\u003e Yes, the 86268 is positioned as a rear fender on dual-axle trailer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the 86268 will fit my trailer?\u003c\/strong\u003e Because the 86268 adjusts from 60 inches to 72 inches, buyers should measure their tandem-axle trailer's mounting width and check manufacturer recommendations to confirm a proper fit before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86268 fender resistant to rust?\u003c\/strong\u003e Yes, its.080 aluminum Tread Brite construction is corrosion-resistant, making it suitable for marine trailer use.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657852123,"sku":"T-D-86268","price":186.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/86268__07665.1722489866.500.750.jpg?v=1785329213"},{"product_id":"tie-down-engineering-86269-adjustable-aluminum-tandem-trailer-fender-9-x-16-in-fits-60-72-in-axle-spread","title":"Tie Down Engineering 86269 Adjustable Aluminum Tandem Trailer Fender, 9 x 16 in, Fits 60-72 in Axle Spread","description":"\u003cp\u003eThe Tie Down Engineering 86269 is an adjustable aluminum fender built to shield tandem-axle trailers from road debris, spray, and mud. Constructed from.080 Aluminum Treadbrite, it offers a lightweight yet durable cover that resists corrosion in wet, marine, and roadside environments. The fender measures 9 in. Wide and 16 in. Tall, with a telescoping design that adjusts from 60 in. To 72 in. In length, allowing it to fit most tandem axle trailer setups without requiring a custom-length part. It is molded in a D-shape profile, giving it a clean, low-profile fit over dual wheel assemblies. The adjustable length feature means one fender can accommodate a range of axle spacings, reducing the guesswork of matching a fixed-length fender to a specific trailer frame. The unit ships as a complete, boxed kit ready for mounting. This fender is intended for tandem axle boat and utility trailers where wheel coverage is needed to protect the trailer bed, cargo, and following traffic from thrown debris. Because it is adjustable rather than a fixed single length, it works across a wider range of tandem trailer frames than a one-size fender.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86269\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Adjustable Fender - Teardrop Tandem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e.080 Aluminum Treadbrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e D-shape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Length:\u003c\/strong\u003e 60 inches to 72 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Tandem axle trailers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628862690\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 86269 fender made of?\u003c\/strong\u003e It is made from.080 Aluminum Treadbrite, a lightweight aluminum material chosen for durability and corrosion resistance on trailer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length does the 86269 fender adjust to?\u003c\/strong\u003e The fender telescopes from 60 inches to 72 inches in length, so it can be sized to fit most tandem axle trailer setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the width and height of this fender?\u003c\/strong\u003e The Tie Down Engineering 86269 measures 9 inches wide and 16 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender fit any tandem axle trailer?\u003c\/strong\u003e It is designed to fit most tandem axle trailers thanks to its 60 to 72 inch adjustable length, but the exact axle spread on your trailer should be checked against that range before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat shape is the 86269 fender?\u003c\/strong\u003e This fender is molded in a D-shape profile, giving it a low-profile fit over tandem wheel assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86269 fender weigh?\u003c\/strong\u003e The Tie Down Engineering 86269 weighs 13.35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this fender come in?\u003c\/strong\u003e The 86269 tandem trailer fender is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fender a single unit or a kit?\u003c\/strong\u003e The 86269 ships as one complete, boxed fender unit ready to mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fender be used on single-axle trailers?\u003c\/strong\u003e No, the 86269 is built and dimensioned specifically for tandem axle trailer setups, not single-axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering 86269 fender?\u003c\/strong\u003e The UPC for this adjustable tandem trailer fender is 081628862690.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017657884891,"sku":"T-D-86269","price":193.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/86269__64355.1739463028.500.750.jpg?v=1785329213"},{"product_id":"tie-down-engineering-86554-modular-plastic-fender-kit-tandem-fits-13-14-and-15-inch-wheels","title":"Tie Down Engineering 86554 Modular Plastic Fender Kit, Tandem, Fits 13, 14, and 15 Inch Wheels","description":"\u003cp\u003eThe Tie Down Engineering 86554 Modular Plastic Fender Kit is a tandem-style fender set built to protect boat and utility trailers from road spray, debris, and impact. The kit includes a front fender (#44343) and a rear fender (#44344), along with all mounting hardware needed for installation on one side of the trailer. Both fenders are molded from UV-resistant plastic that resists fading, cracking, and corrosion over time, making them a durable alternative to steel or fiberglass fenders that can rust or dent. Each fender measures 39.88 inches long, 13.59 inches high, and 7.88 inches wide, and together the pair provides continuous coverage along the trailer side. The kit is designed for 13 inch, 14 inch, and 15 inch wheels and is rated to hold up to 200 pounds, making it suitable for single-axle or multi-axle trailer setups. Built-in U-bolt clearance slots simplify no-drill mounting, and integrated light mounting ports allow for easy installation of LED or marker lights. Finished in black, the 86554 kit is a straightforward, ready-to-install upgrade for trailer owners who need reliable wheel coverage without the weight or maintenance of metal fenders.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86554\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant ABS plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size Compatibility:\u003c\/strong\u003e 13 inch, 14 inch, and 15 inch wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 200 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Compatibility:\u003c\/strong\u003e Single or multi-axle trailers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Dimensions:\u003c\/strong\u003e 39.88 inches L x 13.59 inches H x 7.88 inches W (per fender)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Front fender (#44343) and rear fender (#44344) with mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e U-bolt clearance slots, integrated light mounting ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628865547\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e13 inch, 14 inch, and 15 inch trailer wheels\u003c\/li\u003e\n\u003cli\u003eSingle-axle or multi-axle trailers\u003c\/li\u003e\n\u003cli\u003eRated for up to 200 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes does the Tie Down Engineering 86554 fender kit fit?\u003c\/strong\u003e The 86554 kit is designed for 13 inch, 14 inch, and 15 inch trailer wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this fender kit hold?\u003c\/strong\u003e The 86554 modular fender kit is rated to hold up to 200 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the 86554 kit?\u003c\/strong\u003e This kit includes a front fender (#44343) and a rear fender (#44344), plus all mounting hardware, for one side of a tandem-axle trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fender kit work on a single-axle trailer?\u003c\/strong\u003e Yes, the 86554 fender kit is compatible with single-axle as well as multi-axle trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the fenders made from?\u003c\/strong\u003e The fenders in the 86554 kit are molded from UV-resistant plastic, which helps reduce fading and resists cracking compared to metal fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is each fender in the kit?\u003c\/strong\u003e Each fender measures 39.88 inches long, 13.59 inches high, and 7.88 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86554 fender kit weigh?\u003c\/strong\u003e The complete 86554 modular fender kit weighs 24.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include mounting hardware?\u003c\/strong\u003e Yes, all mounting hardware needed to install the front and rear fenders is included with the 86554 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan lights be mounted on these fenders?\u003c\/strong\u003e Yes, the fenders include integrated light mounting ports for adding LED or marker lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs drilling required to install this fender kit?\u003c\/strong\u003e The 86554 kit has built-in U-bolt clearance slots that support no-drill mounting configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 86554 fender kit?\u003c\/strong\u003e The Tie Down Engineering 86554 fender kit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this fender kit made?\u003c\/strong\u003e The 86554 fender kit is made in the USA.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017659326683,"sku":"T-D-86554","price":164.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-86554-Tandem-Fender__02569.1739477365.500.750.jpg?v=1785329215"},{"product_id":"tie-down-engineering-license-plate-bracket-86565-aluminum-tread-plate-universal-multi-hole-trailer-mount","title":"Tie Down Engineering License Plate Bracket 86565, Aluminum Tread Plate, Universal Multi-Hole Trailer Mount","description":"\u003cp\u003eThis license plate bracket from Tie Down Engineering is built from heavy-duty aluminum tread plate, giving it a rugged, corrosion-resistant construction that stands up to constant exposure to road spray, weather, and general trailer use. Its primary purpose is to mount your trailer's license plate securely to the frame or tongue, keeping the plate visible and legible while protecting it from vibration and impact during towing. The bracket uses a multiple-hole design, which allows it to line up with a wide range of trailer mounting patterns rather than a single fixed layout, making it a practical fit for most standard trailer setups. The tread plate surface also gives the bracket a distinctive raised-diamond texture and a silver, powder-coated finish that resists scuffing and wear over time. Each pack contains one bracket, ready to be fastened in place with your own mounting hardware. Because the mounting holes are spaced for multiple configurations, installation is straightforward whether you are replacing a damaged or rusted-out bracket or adding a proper mount to a trailer that never had one. This bracket, identified by part number 86565, is a simple, durable solution for keeping your license plate securely and visibly mounted on utility, boat, or cargo trailers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86565\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum tread plate (Tread Brite)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Multiple-hole design for universal mounting options\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1 bracket per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628865653\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMultiple-hole design fits most trailer license plate mounting setups; universal, not vehicle-specific.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 86565 bracket used for?\u003c\/strong\u003e It mounts a trailer's license plate securely to the frame or tongue, protecting the plate from vibration and road debris while keeping it visible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bracket made of?\u003c\/strong\u003e Bracket 86565 is made from heavy-duty aluminum tread plate, also called Tread Brite, with a silver powder-coated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bracket fit my trailer?\u003c\/strong\u003e The 86565 bracket uses a multiple-hole design intended to fit most trailer setups, so it works as a universal mount rather than being limited to one specific trailer model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brackets come in the package?\u003c\/strong\u003e One bracket per pack is included with part number 86565.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the bracket come with mounting hardware?\u003c\/strong\u003e The listing covers the aluminum bracket itself, part 86565; separate mounting hardware is used to attach it to your trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Tie Down Engineering part?\u003c\/strong\u003e Yes, part number 86565 is a genuine Tie Down Engineering license plate bracket, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose an aluminum tread plate bracket over a plain steel one?\u003c\/strong\u003e Aluminum tread plate construction on the 86565 bracket resists corrosion better than untreated steel and holds up to ongoing exposure to road spray and weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bracket weigh?\u003c\/strong\u003e The Tie Down Engineering 86565 license plate bracket weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does the bracket have?\u003c\/strong\u003e It has a silver, powder-coated finish over the aluminum tread plate material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bracket be used on boat trailers as well as utility trailers?\u003c\/strong\u003e Because the 86565 bracket has a universal, multiple-hole mounting pattern, it is suited to most trailer types, including boat and utility trailers, rather than one specific application.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017659359451,"sku":"T-D-86565","price":9.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-86565__93012.1722370534.500.750.jpg?v=1785329216"},{"product_id":"tie-down-engineering-trailer-frame-bracket-86567-7-gauge-galvanized-steel-ratchet-strap-mount","title":"Tie Down Engineering Trailer Frame Bracket 86567, 7-Gauge Galvanized Steel Ratchet Strap Mount","description":"\u003cp\u003eThe Tie Down Engineering Frame Bracket, part number 86567, is a heavy-duty mounting point that lets you secure ratchet straps directly to your trailer frame. Instead of looping straps around frame rails or relying on makeshift anchor points, this bracket gives you a dedicated, purpose-built attachment that keeps your boat or cargo locked down during transport.\u003c\/p\u003e\u003cp\u003eThe bracket is made from 7-gauge steel, a thick-gauge construction chosen to handle the repeated tension and shock loading that ratchet strap tie-downs put on a trailer frame. It is finished with a hot-dip galvanized coating, which fully coats the steel in zinc to resist rust and corrosion from road spray, launch ramps, and general outdoor exposure -- an important feature for any hardware that lives on a boat trailer.\u003c\/p\u003e\u003cp\u003eBecause it mounts directly to the trailer frame, the 86567 bracket is a simple bolt-on upgrade for trailer owners who want a stronger, more permanent tie-down point than factory-stamped loops or generic hooks. It pairs with standard ratchet straps to hold a boat, ATV, or other cargo firmly in place while towing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86567\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Frame Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7-Gauge Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-Dip Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628865677\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering 86567 bracket used for?\u003c\/strong\u003e It is a frame bracket that gives you a dedicated point to secure a ratchet strap directly to your trailer frame, rather than looping the strap around a rail or using a makeshift anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 86567 frame bracket made from?\u003c\/strong\u003e The bracket is made from 7-gauge steel for the strength needed to handle ratchet strap tension and towing loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the bracket rust over time?\u003c\/strong\u003e It has a hot-dip galvanized finish, which coats the 7-gauge steel in zinc to resist rust and corrosion from moisture, launch ramps, and road exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Tie Down Engineering frame bracket weigh?\u003c\/strong\u003e The 86567 frame bracket weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86567 bracket fit any trailer frame?\u003c\/strong\u003e It is designed to mount directly to a trailer frame as a ratchet strap tie-down point; check that your frame allows for bolt-on hardware before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the frame bracket installed?\u003c\/strong\u003e The 86567 bracket bolts directly onto the trailer frame, creating a fixed anchor point for a ratchet strap hook or hook end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bracket sold as a single unit or in a pair?\u003c\/strong\u003e Tie Down Engineering part number 86567 is a single frame bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Tie Down Engineering frame bracket?\u003c\/strong\u003e The UPC for part 86567 is 081628865677.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 86567 an OEM Tie Down Engineering part or an aftermarket copy?\u003c\/strong\u003e Part number 86567 is a genuine Tie Down Engineering frame bracket, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the frame bracket be used with any ratchet strap?\u003c\/strong\u003e Yes, the bracket is designed as a mounting anchor for standard ratchet straps used to tie down boats and other trailered cargo.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017659556059,"sku":"T-D-86567","price":2.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-86567__68732.1722501793.500.750.jpg?v=1785329218"},{"product_id":"springfield-1780245-guardian-motor-support-econ-kit-adjusts-21-5-33-inch","title":"Springfield 1780245 Guardian Motor Support Econ Kit, Adjusts 21.5-33 Inch","description":"\u003cp\u003eThe Springfield 1780245 Guardian Motor Support Econ Kit is a bolt-on and over-the-roller transom saver designed to protect the leading edge of an outboard motor's lower unit during trailering and transport. It adjusts to fit a 21.5 to 33 inch range, making it suitable for a variety of trailer and motor setups. The support reduces wear on the steering mechanism by taking stress off the motor and transom while the boat is on the trailer, helping prevent the lower unit from bouncing or swinging during transit.\u003c\/p\u003e\u003cp\u003eThe kit features a narrow cast aluminum head paired with composite pivoting motor supports, combining a durable metal core with lightweight, wear-resistant contact points. This economy combo design offers both a bolt-on mounting option and an over-the-roller mounting option, giving installers flexibility depending on their trailer configuration. The unit is finished in black and is backed by a 5-year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Springfield\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1780245\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Guardian Motor Support Econ Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Range:\u003c\/strong\u003e 21.5 to 33 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Material:\u003c\/strong\u003e Cast aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Support Material:\u003c\/strong\u003e Composite (plastic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Bolt-on and over-the-roller combo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-year limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e 724252\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e724252\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Springfield 1780245 Guardian Motor Support Econ Kit used for?\u003c\/strong\u003e It protects the leading edge of an outboard motor's lower unit while the boat is on a trailer, reducing wear on the steering mechanism during transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size range does the Springfield 1780245 adjust to?\u003c\/strong\u003e The Guardian Motor Support Econ Kit adjusts from 21.5 to 33 inches to accommodate different trailer and motor configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Springfield 1780245 a bolt-on or roller-mount transom saver?\u003c\/strong\u003e It is an economy combo design that supports both bolt-on mounting and over-the-roller mounting, so it can be installed either way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM equivalent part number for the Springfield 1780245?\u003c\/strong\u003e The OEM equivalent part number for this Guardian Motor Support Econ Kit is 724252.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Springfield 1780245 motor support made of?\u003c\/strong\u003e It has a narrow cast aluminum head combined with composite pivoting motor supports that contact the lower unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Springfield 1780245 Guardian Motor Support weigh?\u003c\/strong\u003e The Springfield 1780245 Guardian Motor Support Econ Kit weighs 2.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Springfield 1780245?\u003c\/strong\u003e This Guardian Motor Support Econ Kit is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Springfield 1780245 come with a warranty?\u003c\/strong\u003e Yes, the Springfield 1780245 Guardian Motor Support Econ Kit is backed by a 5-year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Springfield 1780245 fit any outboard motor?\u003c\/strong\u003e Because it adjusts from 21.5 to 33 inches, the Guardian Motor Support Econ Kit fits a range of outboard motor and trailer setups within that span rather than one specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Springfield 1780245 protect against?\u003c\/strong\u003e It protects the lower unit's leading edge from impact and reduces steering mechanism wear that can occur from motor movement during trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Springfield 1780245 an economy version of another motor support?\u003c\/strong\u003e Yes, it is sold as the Guardian Motor Support Econ Kit, an economy bolt-on and over-the-roller combo version of Springfield's Guardian motor support line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Springfield 1780245?\u003c\/strong\u003e The Springfield 1780245 Guardian Motor Support Econ Kit includes the cast aluminum head assembly with composite pivoting motor supports as a complete kit.\u003c\/p\u003e","brand":"Springfield","offers":[{"title":"Default Title","offer_id":49025166934235,"sku":"S-M-1780245","price":116.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_eac98ba5-fb96-4232-b956-4937b9825eec.jpg?v=1785332822"},{"product_id":"springfield-support-bushing-kit-2100074-for-guardian-motor-support","title":"Springfield Support Bushing Kit 2100074 for Guardian Motor Support","description":"\u003cp\u003eThe Springfield Support Bushing Kit is a replacement bushing set designed for Guardian motor supports, the mounts used to stabilize and protect an outboard motor during towing and storage. Over time the bushings inside a motor support wear from repeated flexing and vibration, and replacing them restores a snug, rattle-free fit without needing to replace the entire motor support assembly. This kit is packaged in a bulk quantity of 6, making it a practical option for dealers, marinas, or boat owners who service multiple motor supports or want spares on hand.\u003c\/p\u003e\u003cp\u003eThe kit is compact and lightweight for easy handling and installation, and it is sold as a dedicated wear-part replacement rather than a full support unit, keeping maintenance costs down. It is part of a family of Guardian motor support replacement parts that also includes swivels and mounting hardware, so buyers maintaining a Guardian motor support have a direct source for the specific wear components their unit needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Springfield\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2100074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Support Bushing Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Guardian Motor Support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 6 (bulk pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8.27 x 4.25 x 4.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 038132910287\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eGuardian Motor Support\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Springfield Support Bushing Kit 2100074 used for?\u003c\/strong\u003e It is a replacement bushing kit for Guardian motor supports, used to renew the wear bushings inside the support mount that holds an outboard motor steady during towing or storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part number 2100074 fit any motor support?\u003c\/strong\u003e Part number 2100074 is designed specifically to fit Guardian motor supports, not motor supports from other brands or product lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bushings come in the kit?\u003c\/strong\u003e The Springfield Support Bushing Kit 2100074 is packaged in a bulk quantity of 6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Support Bushing Kit weigh?\u003c\/strong\u003e The kit weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Springfield Support Bushing Kit?\u003c\/strong\u003e The packaged kit measures 8.27 x 4.25 x 4.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Springfield part?\u003c\/strong\u003e Yes, part number 2100074 is a genuine Springfield replacement part made for Guardian motor supports, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need this bushing kit?\u003c\/strong\u003e If the Guardian motor support on your boat feels loose, rattles, or shows worn bushings, the Springfield Support Bushing Kit 2100074 replaces those worn components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this kit and the Plastic Swivels for Motor Support (2100075)?\u003c\/strong\u003e Part 2100074 is the bushing kit that fits inside the motor support, while 2100075 is a separate part covering the plastic swivels for the motor support; they are different components with different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Springfield Support Bushing Kit 2100074 has UPC 038132910287.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used to service more than one motor support?\u003c\/strong\u003e Since the kit is packaged in a bulk quantity of 6, it can supply bushings for more than one Guardian motor support or provide spares for future maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the bushing kit difficult?\u003c\/strong\u003e The Support Bushing Kit 2100074 is a wear-part replacement designed to fit into the existing Guardian motor support assembly, without requiring replacement of the full support unit.\u003c\/p\u003e","brand":"Springfield","offers":[{"title":"Default Title","offer_id":49025166967003,"sku":"S-M-2100074","price":47.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/S-M-2100074_lg__14751.1558133308.500.750.jpg?v=1785329208"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/LUC-11180__93580.1747363849.500.750.jpg?v=1785357568","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trailering-trailer-hardware-accessories.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}