{"title":"Wheel Bearings \u0026 Bearing Protectors","description":null,"products":[{"product_id":"dexter-005-059-00-tang-washer-for-e-z-lube-axles-1-14-uns-spindle-nut-fits-dexter-axles-prior-to-6-02","title":"Dexter Tang Washer 005-059-00, 1 3\/4 Inch 14 GA, for E-Z Lube Trailer Axle Spindle Nuts (Prior to 6\/02)","description":"\u003cp\u003eThe Dexter Tang Washer, part number 005-059-00, is a 1 3\/4 inch, 14 gauge washer used at the spindle nut on Dexter E-Z Lube trailer axles. Its tanged edge locks into the spindle to keep the washer from spinning while the spindle nut is torqued, helping maintain correct bearing preload on the axle. This washer is one of the components included in Dexter's Spindle Nuts \u0026amp; Washers Kit (K71-335-00), which is built for Dexter E-Z Lube axles with a 1 inch-14 UNS spindle thread, produced prior to 6\/02. It is a wear item commonly replaced during bearing service, hub repacking, or brake work on trailer axles, and keeping a spare on hand avoids delays when a tang washer is found damaged or missing during routine maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 005-059-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Description:\u003c\/strong\u003e Washer, Tang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 14 GA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327603207\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Dexter E-Z Lube axles, 1 inch-14 UNS (prior to 6\/02)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed In Kit:\u003c\/strong\u003e Spindle Nuts \u0026amp; Washers Kit K71-335-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Dexter E-Z Lube axles with 1 inch-14 UNS spindle threads, produced prior to 6\/02.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter tang washer 005-059-00 used for?\u003c\/strong\u003e It is a tang washer that sits at the spindle nut on Dexter E-Z Lube trailer axles, with its tanged edge locking into the spindle so the washer cannot spin while the spindle nut is torqued down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is washer 005-059-00?\u003c\/strong\u003e This Dexter tang washer measures 1 3\/4 inches and is made from 14 gauge material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this washer fit my trailer axle?\u003c\/strong\u003e Part 005-059-00 fits Dexter E-Z Lube axles with a 1 inch-14 UNS spindle thread, on axles produced prior to 6\/02. Check your axle's thread and production date before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 005-059-00 tang washer weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this washer sold as part of a kit?\u003c\/strong\u003e Yes, 005-059-00 is one of the components included in Dexter's Spindle Nuts \u0026amp; Washers Kit, K71-335-00, which also includes a tongue washer and hex nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should a tang washer be replaced?\u003c\/strong\u003e A tang washer like 005-059-00 is typically replaced during bearing service, hub repacking, or brake work if it is found bent, cracked, or worn where it locks against the spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 005-059-00 a genuine Dexter part?\u003c\/strong\u003e Yes, 005-059-00 is the genuine Dexter manufacturer part number for this tang washer, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'tang' mean on this washer?\u003c\/strong\u003e On the 005-059-00 washer, the tang is a small tab or flange along the edge that engages a slot on the spindle, preventing the washer from rotating as the spindle nut is tightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy this washer separately from the full kit?\u003c\/strong\u003e Yes, the Dexter tang washer 005-059-00 is available on its own as an individual replacement part in addition to being included in kit K71-335-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is 005-059-00?\u003c\/strong\u003e This Dexter tang washer is listed under boat trailer brakes, reflecting its use on braked trailer axle assemblies.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256314075,"sku":"DEX-005-059-00","price":1.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_005-059-00_Tang_Washer_1-3-4in_14GA__99318.1741879657.500.750.jpg?v=1785329093"},{"product_id":"dexter-006-109-00-5-8-18-90-degree-cone-wheel-nut-grade-8-zinc-plated","title":"Dexter 5\/8-18 90 Degree Cone Nut, Grade 8 Zinc Plated Trailer Axle Spindle Nut, Part 006-109-00","description":"\u003cp\u003eThe Dexter 006-109-00 is a 90 degree cone nut sized for 5\/8-18 threaded trailer axle spindles. It is used to secure and preload the wheel bearing assembly on the spindle end of a boat trailer axle, seating against the bearing race to hold proper bearing adjustment as the wheel rotates. The nut is manufactured to Grade 8 strength and finished with zinc plating for corrosion resistance in wet and road-salt trailer environments, making it a common replacement item during hub, bearing, or spindle service.\u003c\/p\u003e\u003cp\u003eThis cone nut measures 1.06 inches across the flats, so it accepts a standard wrench or socket sized to that dimension for installation and torque. It is sold individually and is intended as a direct fit for axles using a 5\/8-18 threaded spindle with a 90 degree cone-style bearing nut, the same style used across Dexter's light duty trailer axle line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-109-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cone Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNut Style:\u003c\/strong\u003e 90 degree cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcross Flats:\u003c\/strong\u003e 1.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles with a 5\/8-18 threaded spindle designed for a 90 degree cone nut.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the Dexter 006-109-00 cone nut fit?\u003c\/strong\u003e The Dexter 006-109-00 is sized for a 5\/8-18 threaded trailer axle spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wrench size do I need to install this nut?\u003c\/strong\u003e This cone nut measures 1.06 inches across the flats, so a wrench or socket sized to 1.06 inches is needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a 90 degree cone nut used for?\u003c\/strong\u003e A 90 degree cone nut seats against the wheel bearing race on a trailer axle spindle to hold proper bearing preload and adjustment as the wheel rotates, which is the function of the Dexter 006-109-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and finish is the 006-109-00 cone nut made of?\u003c\/strong\u003e It is a Grade 8 nut with a zinc plated finish, chosen for strength and corrosion resistance in trailer wheel-end service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cone nut weigh?\u003c\/strong\u003e The Dexter 006-109-00 cone nut weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cone nut sold as a single unit or in a set?\u003c\/strong\u003e The Dexter 006-109-00 is sold as a single individual cone nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cone nut fit any trailer axle spindle?\u003c\/strong\u003e It fits axle spindles that use a 5\/8-18 thread with a 90 degree cone nut style; check your spindle thread size and nut style before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace this cone nut?\u003c\/strong\u003e The 006-109-00 is typically replaced during wheel bearing service, hub repack, or spindle work where the original cone nut is worn, damaged, or removed for disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 006-109-00 an OEM or aftermarket part?\u003c\/strong\u003e The 006-109-00 is a genuine Dexter part manufactured for Dexter trailer axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this nut come with a matching washer or cotter pin?\u003c\/strong\u003e The Dexter 006-109-00 listing covers the cone nut only; washers, cotter pins, or other hardware are not included.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256412379,"sku":"DEX-006-109-00","price":1.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_006-109-00_Cone_Wheel_Nut_5-8-18_Grade_8_Zinc_Plated_1.06_AF__00185.1741882614.500.750.jpg?v=1785329081"},{"product_id":"90-degree-cone-nut-9-16-18-grade-5-zinc-plated-boat-trailer-wheel-lug-nut-mpn-006-060-00","title":"Dexter Cone Nut, 90 Degree, 9\/16-18 Thread, Grade 5, Zinc Plated, for Boat Trailer Brakes","description":"\u003cp\u003eThis Dexter cone nut (part number 006-060-00) is a 90 degree cone-style fastener designed for boat trailer brake assemblies. The 90 degree cone seat allows the nut to self-center and seat securely against the mating component, a design commonly used where standard flat-face hex nuts are not suitable for the assembly. It is machined with a 9\/16-18 thread and built to Grade 5 strength, giving it the load-bearing capacity expected of a structural fastener in a trailer brake system. The nut is finished with a zinc plating, which provides a protective barrier against corrosion, an important feature for hardware used in and around boat trailers that are regularly exposed to water, road spray, and launch-ramp conditions.\u003c\/p\u003e\u003cp\u003eAt 0.1 pounds, this is a small, lightweight component intended to be used as part of a larger boat trailer brake assembly rather than as a standalone part. It is categorized within boat trailer brake hardware and is sold under the Dexter brand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-060-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cone Nut, 90 Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 9\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone Angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327604020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat trailer brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 006-060-00 cone nut used for?\u003c\/strong\u003e The Dexter 006-060-00 is a 90 degree cone nut used as a fastener within boat trailer brake assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this cone nut have?\u003c\/strong\u003e This Dexter cone nut has a 9\/16-18 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade is the 006-060-00 cone nut rated?\u003c\/strong\u003e It is rated Grade 5, indicating the strength classification of the fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cone nut corrosion resistant?\u003c\/strong\u003e Yes, the Dexter 006-060-00 is zinc plated, which provides a protective finish against corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the cone seat on this nut?\u003c\/strong\u003e The cone seat on part number 006-060-00 is machined at 90 degrees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 006-060-00 cone nut weigh?\u003c\/strong\u003e This cone nut weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 006-060-00 cone nut made from?\u003c\/strong\u003e It is made from zinc-plated steel, consistent with its Grade 5 rating and zinc finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter cone nut sold individually?\u003c\/strong\u003e Yes, the 006-060-00 is a single cone nut component rather than a kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware does this part belong to?\u003c\/strong\u003e The 006-060-00 cone nut is categorized as boat trailer brake hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a cone nut different from a standard hex nut?\u003c\/strong\u003e A cone nut, like the Dexter 006-060-00, has an angled 90 degree seat rather than a flat face, allowing it to self-center against a matching tapered surface in the brake assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256445147,"sku":"DEX-006-060-00","price":2.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_006-060-00_Cone_Nut_90_Degree_9-16-18_Grade_5_Zinc_Plated__83778.1747363801.500.750.jpg?v=1785329083"},{"product_id":"dexter-008-430-90-oil-hub-and-drum-kit-9k-10k-general-duty-trailer-axle-8-on-6-5in-5-8in-studs-with-cone-nuts","title":"Dexter 90 Degree Cone Nut 008-430-90 for Clamp Ring Hub Assemblies, 9,000-15,000 lb Axles","description":"\u003cp\u003eThe Dexter 90 Degree Cone Nut, part number 008-430-90, is the specified fastener for hub assemblies that use a clamp ring on Dexter medium duty trailer axles. It is designed to seat against the clamp ring to properly preload and retain the wheel bearings on one-piece hub assemblies. This cone nut is used on 9K, 10K, and #13G General Duty one-piece hubs within Dexter's medium duty axle line, which covers axle capacities from 9,000 to 15,000 pounds.\u003c\/p\u003e\u003cp\u003eWhen a clamp ring is present on the hub assembly, the 90 degree cone nut is the required fastener; the flange nut is only used as an alternate when a clamp ring is not part of the assembly. Selecting the correct nut for the hub configuration is important for proper bearing preload and safe hub operation. This part is sold as the genuine Dexter cone nut for these applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-430-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 90 Degree Cone Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Clamp Ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Fastener:\u003c\/strong\u003e Flange Nut (used when no clamp ring is present)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 9K, 10K, and #13G General Duty One-Piece Hubs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 9,000-15,000 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter medium duty trailer axles, 9,000-15,000 lb capacity, one-piece hub assemblies (9K, 10K, #13G General Duty) fitted with a clamp ring\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 008-430-90 cone nut used for?\u003c\/strong\u003e The Dexter 008-430-90 is a 90 degree cone nut used to retain and preload the wheel bearings on hub assemblies that include a clamp ring on Dexter medium duty trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a clamp ring to use this cone nut?\u003c\/strong\u003e Yes. The 90 degree cone nut, part number 008-430-90, is specified for use with a clamp ring; if the hub assembly does not have a clamp ring, a flange nut is used as the alternate fastener instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a flange nut instead of the 008-430-90 cone nut?\u003c\/strong\u003e A flange nut is only the correct alternate fastener when there is no clamp ring on the hub assembly. Where a clamp ring is present, the Dexter 90 degree cone nut 008-430-90 must be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity range is this cone nut rated for?\u003c\/strong\u003e The Dexter 008-430-90 cone nut is used within Dexter's medium duty axle line, covering axle capacities of 9,000 to 15,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub types does the 008-430-90 cone nut fit?\u003c\/strong\u003e This cone nut is used on 9K, 10K, and #13G General Duty one-piece hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 008-430-90 a genuine Dexter part?\u003c\/strong\u003e Yes, part number 008-430-90 is a genuine Dexter 90 degree cone nut for one-piece hub assemblies with a clamp ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cone nut affect bearing preload?\u003c\/strong\u003e The 90 degree cone nut, 008-430-90, seats against the clamp ring on the hub assembly to properly preload and retain the wheel bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cone nut work on a one-piece hub without a clamp ring?\u003c\/strong\u003e The 008-430-90 cone nut is specified for one-piece hubs that include a clamp ring; hubs without a clamp ring instead use a flange nut as the alternate fastener.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257034971,"sku":"DEX-008-430-90","price":790.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-8-on-6.5-9k-10k-hub-drum-kit-2009-and-newer-008-430-90__47432.1747363836.500.750.jpg?v=1785329081"},{"product_id":"dexter-k71-028-00-vault-service-kit-6k-axle-2-441-inch-outer-bore-hub-seal-kit","title":"Dexter Vault Service Kit K71-028-00 - 6K Axle Service Kit, 2.441 Inch Outer Bore, 655 Spindle","description":"\u003cp\u003eThe Dexter Vault Service Kit K71-028-00 is a 6K-rated trailer axle service kit sized for a 2.441 inch outer bore, built for the 655 spindle designation. Dexter's Vault Service Kit line is designed to service the bearing and seal area of trailer axles rated in the 6,000 pound (6K) capacity class, matching the bore and spindle dimensions called out in the part name. Selecting the correct outer bore size and spindle designation is critical when servicing a trailer axle, since a mismatched bore or spindle fit will not seat correctly. This kit is cataloged under Dexter's Axles \u0026amp; Springs category and is intended for trailer owners and service shops performing axle bearing maintenance on 6K-class axles fitted with a 2.441 inch outer bearing bore.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-028-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Vault Service Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Class:\u003c\/strong\u003e 6K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore Diameter:\u003c\/strong\u003e 2.441 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle\/Axle Designation:\u003c\/strong\u003e 655\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008179\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Axles \u0026amp; Springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Vault Service Kit K71-028-00 used for?\u003c\/strong\u003e K71-028-00 is a Dexter Vault Service Kit used to service the bearing area of a 6K-class trailer axle with a 2.441 inch outer bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this kit designed for?\u003c\/strong\u003e This kit is designated for the 6K capacity class, Dexter's designation for trailer axles in the 6,000 pound rating class.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does K71-028-00 fit?\u003c\/strong\u003e The kit is sized for a 2.441 inch outer bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle does this Vault Service Kit match?\u003c\/strong\u003e K71-028-00 is designated for the 655 spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-028-00 service kit weigh?\u003c\/strong\u003e It weighs 1.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K71-028-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-028-00 is the Dexter manufacturer part number for this Vault Service Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this part fall under?\u003c\/strong\u003e K71-028-00 is listed under Dexter's Axles \u0026amp; Springs category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if this kit fits my trailer axle?\u003c\/strong\u003e Confirm your axle is in the 6K capacity class and that the bearing outer bore measures 2.441 inches, matching the specification for K71-028-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter Vault Service Kit K71-028-00?\u003c\/strong\u003e The UPC for this kit is 876983008179.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Vault Service Kit the same as a standard bearing kit?\u003c\/strong\u003e The Vault Service Kit is Dexter's named product line for this bearing\/seal area service kit, identified by part number K71-028-00.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262114011,"sku":"DEX-K71-028-00","price":202.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-6000lbs-6-Lug-5.5-inch-Trailer-Axle-vault-Service-Kit-K71-028-00__08250.1747363799.500.750.jpg?v=1785329093"},{"product_id":"ufp-by-dexter-vault-service-kit-k71-030-00-for-2-5k-3-2k-3-5k-545-trailer-axles-1-980-outer-bore","title":"Dexter Vault Service Kit K71-030-00 for 2500, 3200, 3500 lb 545 Series Trailer Axles, 1.980 Inch Bore","description":"\u003cp\u003eThe Dexter Vault Service Kit, part number K71-030-00, is a complete rebuild and maintenance kit for the Dexter Vault bearing protector system used on 2500, 3200, and 3500 lb capacity 545 series trailer axles with a 1.980 inch outer bore. Rather than sourcing individual seals and hardware separately, this kit bundles everything needed to service a pair of hubs in one package: two O-rings, a matched pair of Trailer Buddy assemblies, a vault lube tube, a dedicated vault installation tool, loctite for securing hardware during reassembly, and a grease fitting. The kit is packaged as a single unit (package quantity of 1) and is intended for trailer owners and service shops performing routine bearing protector maintenance or replacing worn Vault components on Dexter-equipped axles. Using the correct outer bore size and axle capacity ensures the Trailer Buddy assemblies and O-rings seat properly, keeping the bearing protector sealed against water and debris intrusion. The included installation tool is sized specifically for the Vault system, helping ensure the assemblies are seated to the correct depth without damaging the O-ring seals. At 2.2 pounds, the kit is compact enough for on-trailer service or storage in a tow vehicle for roadside maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-030-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Dexter Vault\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Axle Capacities:\u003c\/strong\u003e 2500, 3200, and 3500 lb, 545 series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore Diameter:\u003c\/strong\u003e 1.980 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Grease Tube, Installation Tool, Loctite, O-Ring (2), Trailer Buddy Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008193\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter Vault Service Kit K71-030-00?\u003c\/strong\u003e This kit includes 2 O-rings, a pair of Trailer Buddy assemblies, a vault lube tube, 1 vault installation tool, loctite, and a grease fitting, giving you everything needed to service a set of Dexter Vault bearing protectors in one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacities does K71-030-00 fit?\u003c\/strong\u003e K71-030-00 is designed for 2500, 3200, and 3500 lb capacity 545 series trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does this kit require?\u003c\/strong\u003e The Dexter Vault Service Kit K71-030-00 is sized for a 1.980 inch outer bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter Vault Service Kit weigh?\u003c\/strong\u003e The K71-030-00 kit weighs 2.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many O-rings come in the kit?\u003c\/strong\u003e Two O-rings are included in the K71-030-00 kit, one for each Trailer Buddy assembly being serviced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an installation tool included?\u003c\/strong\u003e Yes, the kit includes 1 dedicated vault installation tool for seating the Trailer Buddy assemblies correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include lubricant for the bearing protectors?\u003c\/strong\u003e A vault lube tube and a grease fitting are included with the K71-030-00 kit for servicing the bearing protector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs loctite included for reassembly?\u003c\/strong\u003e Yes, loctite is included in the Dexter Vault Service Kit K71-030-00 for securing hardware during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the package quantity for this kit?\u003c\/strong\u003e K71-030-00 ships as a single kit with a package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the item dimensions of the kit as packaged?\u003c\/strong\u003e The Dexter Vault Service Kit K71-030-00 measures 9 x 3 x 3 inches as an item, with package dimensions of 10 x 7 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K71-030-00 is the genuine Dexter part number for the Vault Service Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a matched pair of Trailer Buddy assemblies?\u003c\/strong\u003e Yes, the K71-030-00 kit includes 2 Trailer Buddy assemblies sized to match the 1.980 inch outer bore of the 545 series axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262343387,"sku":"DEX-K71-030-00","price":223.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFP-Vault-Kit-2.5K-3.2K-3.5K__80141.1739477125.500.750.jpg?v=1785188490"},{"product_id":"dexter-k71-059-00-trailer-axle-bearing-seal-kit-for-3-2k-3-7k-axles-1-980-seal-bore-1-axle","title":"Dexter Bearing and Seal Replacement Kit K71-059-00, 545 Bearing, 1.980 Inch Outer Bore, 3.2K and 3.7K Axles, 1 Axle Set","description":"\u003cp\u003eThe Dexter K71-059-00 Bearing and Seal Replacement Kit supplies the bearings and seal needed to service one boat trailer axle rated for 3.2K and 3.7K applications. It is built around the 545 bearing with a 1.980 inch outer bore, matching the hub dimensions used on these axle capacities. This kit is intended for routine maintenance and repair when hub bearings show wear, run dry of grease, or fail an inspection, and it lets the owner replace the wearing components without buying a full hub assembly.\u003c\/p\u003e\u003cp\u003eBecause trailer bearings operate submerged and reheated with every launch and retrieval cycle, using a matched bearing and seal set from Dexter helps maintain the correct fit and seal engagement that a hub depends on for water resistance. Each kit is packaged to service a single axle; a trailer with two axles will require two kits, and tandem or triple-axle trailers should order a kit per axle serviced.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-059-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Number:\u003c\/strong\u003e 545\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore:\u003c\/strong\u003e 1.980 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Rating:\u003c\/strong\u003e 3.2K and 3.7K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 1 axle per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.92 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008476\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e3.2K and 3.7K rated boat trailer axles using a 545 bearing with a 1.980 inch outer bore\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers available for this part\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-059-00 kit include?\u003c\/strong\u003e The K71-059-00 kit includes the bearings and seal needed to service one boat trailer axle, matched to the 545 bearing and 1.980 inch outer bore used on 3.2K and 3.7K rated axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many axles does one K71-059-00 kit cover?\u003c\/strong\u003e One kit covers a single axle, so a tandem-axle trailer needs two kits and a triple-axle trailer needs three.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does this kit fit?\u003c\/strong\u003e This kit is sized for a 1.980 inch outer bore hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing number is used in this kit?\u003c\/strong\u003e The kit is built around the 545 bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacities is the K71-059-00 kit designed for?\u003c\/strong\u003e It is designed for axles rated at 3.2K and 3.7K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-059-00 kit weigh?\u003c\/strong\u003e The kit weighs 1.92 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K71-059-00 is a genuine Dexter part number, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace trailer axle bearings and seals?\u003c\/strong\u003e Bearings and seals should be replaced when they show wear, run dry of grease, overheat, or fail a routine hub inspection; the K71-059-00 kit supplies the parts needed for that service on one 3.2K\/3.7K axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-059-00 kit include grease?\u003c\/strong\u003e The kit supplies the bearings and seal for the axle; it does not list grease as an included item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this kit on both axles of a tandem-axle trailer?\u003c\/strong\u003e One K71-059-00 kit services only one axle, so a tandem-axle trailer requires two separate kits.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262867675,"sku":"DEX-K71-059-00","price":80.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-5-Lug-4-and-a-half-inch-Bolt_3200--37000lbs-Axle-Bearing-and-Seal-Replacement-Kit-K71-059-00__14299.1747363799.500.750.jpg?v=1785329082"},{"product_id":"dexter-k71-g02-21-trailer-wheel-bearing-kit-for-1-1-16-x-3-4-spindles-with-dust-cap","title":"Dexter Bearing Kit K71-G02-21, 1-1\/16 x 3\/4 Inch Spindle with Dust Cap","description":"\u003cp\u003eThe Dexter K71-G02-21 is a complete trailer hub bearing kit sized for a 1-1\/16 inch x 3\/4 inch tapered spindle, the sizing found on many single-axle boat and utility trailers. The kit uses precision-tapered roller bearings paired with matching cups so the hub rotates smoothly under load while resisting the side loading trailers see on turns and rough roads. Everything needed to service one hub is included in a single kit: two bearing cones, two matching cups, a grease seal, a cotter pin, and a dust cap, so there is no need to hunt down individual components separately.\u003c\/p\u003e\u003cp\u003eThis kit is intended for trailer hub rebuilds and routine bearing maintenance, replacing worn, pitted, or noisy bearings before they lead to hub failure or a lost wheel on the road. Because the cones, cups, seal, cotter pin, and dust cap are matched as a set, fitment and clearance are correct out of the box, which helps avoid the improper preload or seal leaks that can result from mixing components from different sources.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-21\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle O.D.:\u003c\/strong\u003e 1-1\/16 inch x 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two bearing cones, two bearing cups, seal, cotter pin, dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Tapered roller bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9.75 x 5.25 x 1.5 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does the Dexter K71-G02-21 bearing kit fit?\u003c\/strong\u003e The K71-G02-21 is sized for a 1-1\/16 inch x 3\/4 inch tapered spindle, a common size on single-axle boat and utility trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-G02-21 kit?\u003c\/strong\u003e This kit includes two bearing cones, two matching bearing cups, a grease seal, a cotter pin, and a dust cap, everything needed to service one hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include the dust cap?\u003c\/strong\u003e Yes, a dust cap is included along with the cones, cups, seal, and cotter pin in the K71-G02-21 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the cones and cups matched to each other?\u003c\/strong\u003e Yes, the two cones and two cups in the K71-G02-21 kit are matched sets, which keeps clearance and preload correct without mixing components from different sources.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bearing is used in this kit?\u003c\/strong\u003e The K71-G02-21 uses precision-tapered roller bearings, which handle both radial and side loading on a trailer hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-21 bearing kit weigh?\u003c\/strong\u003e The kit weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the outside dimensions of the K71-G02-21 packaging?\u003c\/strong\u003e The item measures 9.75 x 5.25 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit for one hub or a full axle?\u003c\/strong\u003e The K71-G02-21 is packaged as a single hub kit with two cones and two cups; a full axle with two hubs requires two kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the bearing cups in this kit?\u003c\/strong\u003e The bearing cups have an outside diameter of 1.06 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace my trailer bearing kit?\u003c\/strong\u003e Replace a trailer bearing kit like the K71-G02-21 when bearings show pitting, noise, excess play, or after a hub has run hot or been submerged for an extended period.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264997595,"sku":"DEX-K71-G02-21","price":28.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61G7V4q4pEL.jpg?v=1784498678"},{"product_id":"1-1-16-trailer-hub-bearing-kit-with-dust-cap-mpn-k71-g02-34-for-1-1-16-spindles","title":"Dexter 1-1\/16 Inch Trailer Bearing Kit with Dust Cap, K71-G02-34","description":"\u003cp\u003eThe Dexter K71-G02-34 is a complete trailer bearing kit built around a 1-1\/16 inch spindle, giving you every wear component needed to service one hub in a single package. The kit includes 2 bearing cones, 2 bearing cups, a grease seal, a cotter pin, and a dust cap, so you are not left hunting for a missing piece mid-repair. The bearings are roller-bearing type and are designed to run on grease lubricant, matching standard trailer hub service practice.\u003c\/p\u003e\u003cp\u003eThis kit is intended for trailer axle and hub assemblies fitted with a 1-1\/16 inch spindle. Because it bundles both the inner and outer cone-and-cup sets along with the seal and dust cap, it covers a full bearing service in one purchase rather than requiring separate orders for each part. It is a straightforward fit for routine maintenance, bearing replacement after a failure, or as part of a wheel-off inspection and repack.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-34\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Diameter:\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Roller Bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 bearing cones, 2 bearing cups, 1 grease seal, 1 cotter pin, 1 dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12.5 x 10 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.68 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does the Dexter K71-G02-34 bearing kit fit?\u003c\/strong\u003e The K71-G02-34 kit is sized for a 1-1\/16 inch spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-G02-34 kit?\u003c\/strong\u003e This Dexter kit includes 2 bearing cones, 2 bearing cups, a grease seal, a cotter pin, and a dust cap, covering a full bearing service for one hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-G02-34 kit come with both inner and outer bearings?\u003c\/strong\u003e Yes, the kit contains 2 cones and 2 cups, which provide both the inner and outer bearing sets needed for one hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bearing is used in this kit?\u003c\/strong\u003e Dexter K71-G02-34 uses roller-type bearings for the cone and cup sets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lubricant should be used with the K71-G02-34 bearing kit?\u003c\/strong\u003e Grease is the compatible lubricant for the bearings in the K71-G02-34 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include a dust cap?\u003c\/strong\u003e Yes, a dust cap is included along with the bearing cones, cups, seal, and cotter pin in the K71-G02-34 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-34 bearing kit weigh?\u003c\/strong\u003e The Dexter K71-G02-34 bearing kit weighs 0.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the K71-G02-34 kit?\u003c\/strong\u003e The kit measures 12.5 x 10 x 6 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a grease seal included with the K71-G02-34 kit?\u003c\/strong\u003e Yes, a grease seal is part of the K71-G02-34 kit contents along with the cones, cups, cotter pin, and dust cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cotter pin included or sold separately?\u003c\/strong\u003e The cotter pin is included in the Dexter K71-G02-34 bearing kit, not sold separately.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265128667,"sku":"DEX-K71-G02-34","price":24.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51U0N1uU5sL.jpg?v=1784498696"},{"product_id":"1-1-4-trailer-hub-bearing-kit-with-dust-cap-mpn-k71-g02-36-2-cones-2-cups-seal-cotter-pin-dust-cap","title":"Dexter 1-1\/4 Inch Trailer Bearing Kit with Dust Cap, K71-G02-36","description":"\u003cp\u003eThis Dexter 1-1\/4 inch bearing kit, part number K71-G02-36, is a complete trailer hub bearing set built for trailer hubs using a 1-1\/4 inch spindle diameter. The kit is supplied as a full set rather than individual components, giving trailer owners everything needed to service a hub in one purchase: two bearing cones, two bearing cups, a seal, a cotter pin, and a dust cap. Each cone-and-cup pair is matched as a set, so the bearing races and rollers seat and wear correctly together once installed.\u003c\/p\u003e\u003cp\u003eThe bearings are roller-style bearings intended to run on grease lubrication, matching standard trailer hub servicing practice. The included seal keeps grease in and water and road debris out of the hub cavity, while the cotter pin secures the spindle nut and the dust cap caps off the hub to keep the packed grease clean and protected from the elements. This makes the K71-G02-36 kit suited to routine trailer hub maintenance, bearing replacement after a repack, or rebuilding a hub that has failed a bearing inspection.\u003c\/p\u003e\u003cp\u003eBecause the kit bundles the cones, cups, seal, cotter pin, and dust cap together, it is intended for hubs sized for a 1-1\/4 inch bearing kit and simplifies ordering versus sourcing each part separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-36\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Size:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 bearing cones, 2 bearing cups, 1 seal, 1 cotter pin, 1 dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Roller Bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.99 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K71-G02-36 bearing kit?\u003c\/strong\u003e The K71-G02-36 kit includes 2 bearing cones, 2 bearing cups, a seal, a cotter pin, and a dust cap, giving you a complete set to service a 1-1\/4 inch trailer hub in a single purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does this bearing kit fit?\u003c\/strong\u003e This Dexter kit is sized for a 1-1\/4 inch bearing, matching trailer hubs built for that spindle diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearing cones and cups sold as matched sets?\u003c\/strong\u003e Yes, the K71-G02-36 kit pairs each cone with its matching cup, which is how trailer bearings should be installed so the rollers and races wear evenly together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bearing is used in this kit?\u003c\/strong\u003e The Dexter K71-G02-36 kit uses roller-type bearings, the standard bearing style used in trailer hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lubricant should be used with this bearing kit?\u003c\/strong\u003e Grease is the compatible lubricant for the K71-G02-36 bearing kit, consistent with standard trailer hub packing practice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a dust cap?\u003c\/strong\u003e Yes, a dust cap is included with the K71-G02-36 kit to keep packed grease clean and protected once the hub is serviced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with a seal and cotter pin?\u003c\/strong\u003e Both are included: the seal keeps grease in and contaminants out of the hub, and the cotter pin is used to secure the spindle nut after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G02-36 bearing kit weigh?\u003c\/strong\u003e This bearing kit weighs 0.99 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit suitable for repacking trailer hub bearings?\u003c\/strong\u003e Yes, the K71-G02-36 kit contains the cones, cups, seal, cotter pin, and dust cap needed for a full bearing repack or replacement on a 1-1\/4 inch trailer hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just one bearing cone or cup from this kit?\u003c\/strong\u003e The K71-G02-36 is sold as a complete kit with 2 cones, 2 cups, a seal, a cotter pin, and a dust cap rather than as individual components.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265259739,"sku":"DEX-K71-G02-36","price":29.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61um-ER1gOL.jpg?v=1784498702"},{"product_id":"1-1-4-x-3-4-trailer-wheel-bearing-kit-with-dust-cap-tapered-roller-bearings-seal-and-cap-mpn-k71-g02-52","title":"Dexter Bearing Kit K71-G02-52, 1-1\/4 Inch x 3\/4 Inch Spindle with Dust Cap","description":"\u003cp\u003eThe Dexter K71-G02-52 bearing kit is a complete tapered roller bearing set sized for a 1-1\/4 inch by 3\/4 inch trailer spindle. It is built to support the hub assembly on a boat trailer or utility trailer axle, carrying the radial and thrust loads created as the wheel rotates and as the trailer turns, brakes, and travels over uneven road surfaces. The kit uses precision-tapered roller bearings, which distribute load across the full length of the roller rather than a single point, giving longer service life and more consistent rolling resistance than a straight ball bearing under the combined side and vertical loads a trailer axle sees.\u003c\/p\u003e\u003cp\u003eEach kit includes both halves of the bearing assembly (two cones and two cups), so the inner and outer bearing races are matched and ready to press into the hub without needing to source components separately. A grease seal and cotter pin are included to retain lubricant and secure the spindle nut, and a dust cap is included to keep water, grit, and road debris out of the hub cavity. The bearings are compatible with standard grease-based lubrication used in trailer hub service.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-52\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Outside Diameter:\u003c\/strong\u003e 1-1\/4 inch x 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Tapered roller bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two bearing cones, two bearing cups, grease seal, cotter pin, dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.81 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does the Dexter K71-G02-52 bearing kit fit?\u003c\/strong\u003e This kit is sized for a 1-1\/4 inch by 3\/4 inch trailer spindle, matching the stepped diameter common on boat and utility trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-G02-52 kit?\u003c\/strong\u003e The kit includes two bearing cones, two bearing cups, a grease seal, a cotter pin, and a dust cap, giving you a complete matched set for one hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearings in this kit tapered roller bearings?\u003c\/strong\u003e Yes, the Dexter K71-G02-52 kit uses tapered roller bearings, which handle combined radial and thrust loads better than straight ball bearings under trailer axle conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with a dust cap?\u003c\/strong\u003e Yes, a dust cap is included with the K71-G02-52 kit to keep water and debris out of the hub after the bearings are installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of grease should be used with this bearing kit?\u003c\/strong\u003e The Dexter K71-G02-52 bearings are compatible with standard trailer wheel bearing grease.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-52 bearing kit weigh?\u003c\/strong\u003e The kit weighs 0.81 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy the cups and cones separately?\u003c\/strong\u003e No, the K71-G02-52 kit includes both the cones and matching cups as a set, so the races are already paired for correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a cotter pin included with the K71-G02-52 kit?\u003c\/strong\u003e Yes, a cotter pin for securing the spindle nut is included along with the bearings, seal, and dust cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for boat trailers?\u003c\/strong\u003e Yes, the 1-1\/4 inch by 3\/4 inch spindle fit of the K71-G02-52 kit is a common size used on boat trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-G02-52 kit include a grease seal?\u003c\/strong\u003e Yes, a grease seal is included in the kit to retain lubricant inside the hub.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265325275,"sku":"DEX-K71-G02-52","price":28.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71NIRHFZWfL.jpg?v=1784498703"},{"product_id":"trailer-wheel-bearing-kit-k71-g02-53-1-1-16-in-x-1-3-8-in-axle-set-with-dust-cap-seal-and-cotter-pin","title":"Dexter K71-G02-53 Trailer Wheel Bearing Kit, 1-3\/8 Inch x 1-1\/16 Inch, with Dust Cap","description":"\u003cp\u003eThe Dexter K71-G02-53 is a complete trailer wheel bearing kit sized for a 1-3\/8 inch x 1-1\/16 inch spindle, giving you everything needed to service one wheel hub in a single package. Rather than sourcing cones, cups, a seal, and hardware separately, this kit bundles the matched components so the bearing race and cone are properly paired from the factory, which is critical for correct bearing preload and long service life.\u003c\/p\u003e\u003cp\u003eEach kit includes two bearing cones, two bearing cups, a grease seal, a cotter pin, and a dust cap, covering both the inner and outer bearing positions on the hub. This makes it suited for routine bearing repacking, hub rebuilds, or replacing worn or damaged bearings on trailer axles that use this spindle diameter. The included dust cap keeps water and debris out of the repacked hub after installation, and the cotter pin secures the spindle nut per standard trailer hub assembly practice.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-53\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wheel Bearing Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Size:\u003c\/strong\u003e 1-3\/8 inches x 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 bearing cones, 2 bearing cups, 1 grease seal, 1 cotter pin, 1 dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983010318\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size spindle does the Dexter K71-G02-53 bearing kit fit?\u003c\/strong\u003e The K71-G02-53 kit is sized for a 1-3\/8 inch x 1-1\/16 inch trailer spindle, matching the inner and outer bearing bore diameters at those two dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-G02-53 kit?\u003c\/strong\u003e This Dexter kit includes 2 bearing cones, 2 bearing cups, 1 grease seal, 1 cotter pin, and 1 dust cap, enough to service one complete wheel hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include the dust cap?\u003c\/strong\u003e Yes, a dust cap is included with the K71-G02-53 kit along with the cones, cups, seal, and cotter pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-53 bearing kit weigh?\u003c\/strong\u003e The Dexter K71-G02-53 bearing kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a kit for one hub or a pair?\u003c\/strong\u003e The K71-G02-53 is a single-hub kit, containing the cones, cups, seal, cotter pin, and dust cap needed for one wheel bearing assembly; a second kit is needed for the other side of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearing cups and cones pre-matched?\u003c\/strong\u003e Yes, the cones and cups in the K71-G02-53 kit are matched sets, which is important for correct bearing fit and preload rather than mixing bearings from different sources.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bearing kit used for?\u003c\/strong\u003e The K71-G02-53 is used for repacking or rebuilding a trailer wheel hub, replacing worn bearings, a damaged seal, or a lost dust cap on axles with a 1-3\/8 inch x 1-1\/16 inch spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cotter pin included, or do I need to buy one separately?\u003c\/strong\u003e A cotter pin is included in the K71-G02-53 kit, so no separate hardware purchase is needed for that step of the reassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K71-G02-53 is the Dexter manufacturer part number for this bearing kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work if my hub uses a different spindle size?\u003c\/strong\u003e No, the K71-G02-53 kit is specific to a 1-3\/8 inch x 1-1\/16 inch spindle; a hub with a different bearing bore size requires a different kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991266635995,"sku":"DEX-K71-G02-53","price":25.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81yqyRcX77L.jpg?v=1784498813"},{"product_id":"bearing-buddy-1980-chrome-plated-wheel-bearing-protector-1-980-inch-hub-bore","title":"Bearing Buddy 1980 Chrome Plated Wheel Bearing Protector - 1.980 Inch Hub Bore","description":"\u003cp\u003eThe Bearing Buddy 1980 is a chrome plated wheel bearing protector built for trailer hubs with a 1.980 inch (50.29 mm) inside bore. It mounts onto the outer end of a trailer hub and keeps water and dirt out of the wheel bearings while making it fast to check and top off grease level without removing the hub or dust cap. This model is designated 'without Bra,' meaning it is supplied as the chrome protector unit itself, without the added rubber protective bra cover.\u003c\/p\u003e\u003cp\u003eInside the hub, this bearing protector is designed for use with an outer bearing cone of L-44643, L-44649, or L-44640, paired with an outer bearing cup (race) of L44610. It is compatible with marine grease for lubrication. The housing is chrome plated steel for corrosion resistance in wet, road-spray, and marine trailering environments, and it is intended for boats, RVs, ATVs, and utility trailers using a hub built to the 1.980 inch bore spec.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bearing Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 42102\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 1980\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome-Plated Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Bore Diameter:\u003c\/strong\u003e 1.980 inches (50.29 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 8.3 x 3.7 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outer Bearing Cone:\u003c\/strong\u003e L-44643, L-44649, L-44640\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outer Bearing Cup (Race):\u003c\/strong\u003e L44610\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Marine grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 650209421023\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits trailer hubs machined to a 1.980 inch (50.29 mm) inside bore\u003c\/li\u003e\n\u003cli\u003eDesigned for use with L-44643, L-44649, or L-44640 outer bearing cone and L44610 outer bearing cup (race)\u003c\/li\u003e\n\u003cli\u003eSuited to boat trailers, RV trailers, ATV trailers, and utility trailers using this bore size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub does the Bearing Buddy 1980 fit?\u003c\/strong\u003e The Bearing Buddy 1980 fits trailer hubs with a 1.980 inch (50.29 mm) inside bore; the model number 1980 refers directly to this bore size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this Bearing Buddy 1980 include the rubber bra cover?\u003c\/strong\u003e No, this version of the Bearing Buddy 1980 is the chrome plated protector unit without the rubber bra cover, so the bra is not included with this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearings is the Bearing Buddy 1980 designed to work with?\u003c\/strong\u003e It is designed for use with an outer bearing cone of L-44643, L-44649, or L-44640 and an outer bearing cup (race) of L44610.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bearing Buddy 1980 made of?\u003c\/strong\u003e The Bearing Buddy 1980 is made of chrome plated steel, which resists corrosion from water and road spray during trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a Bearing Buddy actually do?\u003c\/strong\u003e A Bearing Buddy is a wheel bearing protector that mounts on the hub and keeps water and dirt out of the wheel bearings while allowing a quick, positive check of lubricant level without disassembling the hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grease should be used with the Bearing Buddy 1980?\u003c\/strong\u003e The Bearing Buddy 1980 is compatible with marine grease for lubricating the wheel bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the Bearing Buddy 1980?\u003c\/strong\u003e The Bearing Buddy 1980 measures 8.3 x 3.7 x 2 inches and weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of trailers can use the Bearing Buddy 1980?\u003c\/strong\u003e The Bearing Buddy 1980 is suited to boat trailers, RV trailers, ATV trailers, and other utility trailers built with a 1.980 inch hub bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bearing Buddy 1980 the same as other Bearing Buddy models?\u003c\/strong\u003e No, Bearing Buddy models are sized to specific hub bores, and the 1980 model is the version sized for a 1.980 inch (50.29 mm) bore; other bore sizes use a different model number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the Bearing Buddy 1980 is the right fit for my hub?\u003c\/strong\u003e Measure the inside bore of your trailer hub; the Bearing Buddy 1980 is sized specifically for a 1.980 inch (50.29 mm) bore and will not fit hubs machined to a different bore diameter.\u003c\/p\u003e","brand":"Bearing Buddy","offers":[{"title":"Default Title","offer_id":49031068451035,"sku":"B-B-42102","price":21.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71R0vOv4whL.jpg?v=1785207890"},{"product_id":"bearing-buddy-1781ss-trailer-wheel-bearing-protector-clam-pack","title":"Bearing Buddy 1781SS Trailer Wheel Bearing Protector, Clam Pack","description":"\u003cp\u003eThe Bearing Buddy 1781SS is a trailer wheel bearing protector, packaged in a retail clam pack for easy display and purchase. Bearing Buddy protectors mount to the trailer hub and use a spring-loaded piston to keep the wheel bearing cavity filled with grease, helping push out moisture and contaminants that would otherwise lead to bearing corrosion and premature failure. This is a core component in trailer hub maintenance, intended for boat trailers, utility trailers, and other towable equipment that use grease-lubricated wheel bearings.\u003c\/p\u003e\u003cp\u003eThe 1781SS is sold as a single clam-pack unit under part number 1781SS and falls within the Trailer Hubs \u0026amp; Bearings product category. It weighs 1.2 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bearing Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1781SS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clam pack (retail)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 650209412045\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bearing Buddy 1781SS used for?\u003c\/strong\u003e The Bearing Buddy 1781SS is a trailer wheel bearing protector that mounts to the hub and keeps the bearing cavity filled with grease, which helps push out moisture and contaminants to reduce bearing corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bearing Buddy 1781SS packaged?\u003c\/strong\u003e The 1781SS ships in a clam pack, a retail clamshell package designed for point-of-sale display.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bearing Buddy 1781SS weigh?\u003c\/strong\u003e The Bearing Buddy 1781SS weighs 1.2 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does the 1781SS belong to?\u003c\/strong\u003e Part number 1781SS is listed in the Trailer Hubs \u0026amp; Bearings category, alongside other trailer bearing protection and hub components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bearing Buddy 1781SS sold as a single unit or a pair?\u003c\/strong\u003e The 1781SS is sold as one clam-pack unit under this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 1781SS?\u003c\/strong\u003e Part number 1781SS is manufactured by Bearing Buddy, a brand focused on trailer wheel bearing protection products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bearing Buddy 1781SS help prevent bearing failure?\u003c\/strong\u003e Yes, the Bearing Buddy 1781SS is designed to keep the wheel bearing cavity packed with grease, which helps prevent the moisture intrusion that leads to bearing corrosion and failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I identify the correct Bearing Buddy protector for my trailer?\u003c\/strong\u003e Bearing Buddy protectors, including the 1781SS, are identified by their specific part number, so confirm 1781SS matches the part number required for your hub before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Bearing Buddy 1781SS?\u003c\/strong\u003e The Bearing Buddy 1781SS carries UPC 650209412045.\u003c\/p\u003e","brand":"Bearing Buddy","offers":[{"title":"Default Title","offer_id":49031068483803,"sku":"B-B-1781SS","price":20.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_dba74559-6259-42a6-92db-7a3f9e528601.jpg?v=1785350137"},{"product_id":"bearing-buddy-2328ss-stainless-steel-bearing-protector-for-2-328-inch-hubs-boat-and-utility-trailers","title":"Bearing Buddy 2328SS Stainless Steel Bearing Protector for 2.328 Inch Hubs, Boat and Utility Trailers","description":"\u003cp\u003eThe Bearing Buddy 2328SS is a stainless steel wheel bearing protector designed to fit trailer hubs with a 2.328 inch inside diameter, including boat trailers, ATV trailers, utility trailers, and horse trailers. Instead of a plain dust cap, it functions as a pressurized bearing cover system: a spring-loaded piston maintains a safe 3 psi of pressure inside the hub, which keeps grease pushed against the seals and keeps water and road dirt out. The self-regulating pressure relief valve automatically releases excess grease during servicing or heat buildup, protecting the inner seal from damage caused by overpressurization while keeping the bearing properly lubricated.\u003c\/p\u003e\u003cp\u003eConstructed from corrosion-resistant stainless steel, the 2328SS is built to hold up under saltwater exposure, making it a common choice for boat trailers as well as RVs, ATVs, and horse and utility trailers. It is manufactured in the USA and is quality inspected for a precise fit. Installation is straightforward: measure the hub to confirm proper fit, then tap the bearing protector into place using a wood block and hammer. If it does not fit securely, do not force it.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bearing Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2328SS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Hub Inside Diameter:\u003c\/strong\u003e 2.328 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 2.33 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Roller Bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2 x 4 x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1 count\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 650209431046\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTrailer hubs with a 2.328 inch inside diameter, including boat trailers, ATVs, utility trailers, and horse trailers\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub does the Bearing Buddy 2328SS fit?\u003c\/strong\u003e The 2328SS is sized for trailer hubs with a 2.328 inch inside diameter; measure your hub before ordering to confirm a secure fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of this bearing protector?\u003c\/strong\u003e The Bearing Buddy 2328SS has an outside diameter of 2.33 inches, which is designed to press into a hub with a 2.328 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 2328SS made from?\u003c\/strong\u003e It is made from corrosion-resistant stainless steel, chosen for durability in saltwater conditions on boat trailers as well as use on RVs, ATVs, and horse and utility trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pressure relief system work?\u003c\/strong\u003e A spring-loaded piston inside the 2328SS maintains about 3 psi of pressure in the hub, automatically releasing excess grease so the inner seal is not damaged by overpressurization while keeping the bearing lubricated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bearing protector keep water out of the hub?\u003c\/strong\u003e Yes, the pressurized design of the Bearing Buddy 2328SS is intended to keep grease in and water and dirt out of the wheel bearing hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 2328SS installed?\u003c\/strong\u003e Measure the hub to confirm proper fit, then tap the 2328SS into the hub using a wood block and a hammer; if it does not seat securely, stop and do not force the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bearing protectors come in one package?\u003c\/strong\u003e The Bearing Buddy 2328SS is packaged as 1 count, meaning one bearing protector per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the 2328SS?\u003c\/strong\u003e The Bearing Buddy 2328SS weighs 1.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bearing Buddy 2328SS suitable for boat trailers used in saltwater?\u003c\/strong\u003e Yes, its stainless steel construction is built to resist corrosion in saltwater environments, making it suitable for boat trailer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Bearing Buddy 2328SS?\u003c\/strong\u003e The UPC for the Bearing Buddy 2328SS is 650209431046.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 2328SS made in the USA?\u003c\/strong\u003e Yes, the Bearing Buddy 2328SS is manufactured in the USA and is quality inspected for a precise fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bearing is the 2328SS designed for?\u003c\/strong\u003e The Bearing Buddy 2328SS is designed for use with roller-type wheel bearings in trailer hubs.\u003c\/p\u003e","brand":"Bearing Buddy","offers":[{"title":"Default Title","offer_id":49031068516571,"sku":"B-B-2328SS","price":45.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7184ax8YueL.jpg?v=1785207890"},{"product_id":"bearing-buddy-42202-chrome-plated-bearing-protector-for-1-980-inch-hub-bore-fits-l-44649-l-44643-l-44640-bearings","title":"Bearing Buddy 42202 Chrome-Plated Bearing Protector for 1.980 Inch Hub Bore, Fits L-44649\/L-44643\/L-44640 Bearings","description":"\u003cp\u003eThe Bearing Buddy 42202 is a chrome-plated bearing protector designed to keep water, dirt, and grit out of the wheel bearings on boat trailers, utility trailers, and campers. It installs into a trailer hub with a 1.980 inches (50.29 mm) inside diameter, where it seals against the outer bearing cone and race to protect the bearing pack from moisture intrusion. A spring-loaded piston inside the unit maintains a steady 3 psi of pressure, which holds grease in and keeps water and dust out while preventing the hub from being overfilled or overpressurized, a condition that can otherwise damage the inner seal.\u003c\/p\u003e\u003cp\u003eA blue visual grease indicator on the face of the unit shows lubrication level at a glance: when the hub is properly filled with grease, the indicator extends about 1\/8 inch out from the retaining ring; when it sits flush or recessed under the ring, it is time to add grease. The body is manufactured from carbon steel with a chrome-plated finish for corrosion resistance in freshwater environments, and the internal components are stainless steel. Installation is done by measuring the hub bore or dust cap opening with a caliper to confirm fit, then tapping the unit into place with a wood block and hammer; no special tools are required. This unit is designed to work with outer bearing cone part numbers L-44643, L-44649, and L-44640, and outer bearing cup (race) part number L-44610. It is sold as the bearing protector only, without the rubber protective bra\/cover accessory. Made in the USA and backed by a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bearing Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 42202\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 1980A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome-Plated Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Bore Inside Diameter:\u003c\/strong\u003e 1.980 inches (50.29 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outer Bearing Cone:\u003c\/strong\u003e L-44643, L-44649, L-44640\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outer Bearing Cup (Race):\u003c\/strong\u003e L-44610\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Indicator:\u003c\/strong\u003e Blue visual indicator, extends 1\/8 inch when full\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 3 psi, maintained by spring-loaded piston\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 4 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 650209422020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer hubs with a 1.980 inches (50.29 mm) inside diameter, used with outer bearing cone L-44643, L-44649, or L-44640 and outer bearing cup (race) L-44610.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub does the Bearing Buddy 42202 fit?\u003c\/strong\u003e The Bearing Buddy 42202 fits trailer hubs with a 1.980 inches (50.29 mm) inside diameter. Measure the hub bore or dust cap opening with a caliper before ordering to confirm the fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearings is this bearing protector designed to work with?\u003c\/strong\u003e The Bearing Buddy 42202 is designed to work with outer bearing cone numbers L-44643, L-44649, or L-44640, paired with outer bearing cup (race) L-44610.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the blue indicator show when the hub needs more grease?\u003c\/strong\u003e Yes. On the Bearing Buddy 42202, the blue visual grease indicator extends about 1\/8 inch out from the retaining ring when the hub is properly filled with grease, and sits flush or recessed under the ring when it needs more grease.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much pressure does the Bearing Buddy 42202 maintain inside the hub?\u003c\/strong\u003e A spring-loaded piston inside the 42202 maintains a steady 3 psi of pressure, which holds grease in and keeps water and dust out while preventing overfilling or overpressurization of the hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the protective bra or cover included with this part?\u003c\/strong\u003e No. The Bearing Buddy 42202 is sold without the rubber protective bra\/cover accessory, so it is the chrome-plated bearing protector unit only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bearing Buddy 42202 made of?\u003c\/strong\u003e The 42202 body is manufactured from carbon steel with a chrome-plated finish for corrosion resistance, and its internal components are stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bearing Buddy 42202 installed?\u003c\/strong\u003e Measure the inside diameter of the trailer hub or the outside diameter of the dust cap to confirm fit, then tap the Bearing Buddy 42202 into place using a wood block and hammer. No special tools are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bearing Buddy 42202 weigh?\u003c\/strong\u003e The Bearing Buddy 42202 weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Bearing Buddy 42202?\u003c\/strong\u003e The Bearing Buddy 42202 measures 9 x 4 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Bearing Buddy 42202?\u003c\/strong\u003e The Bearing Buddy 42202 is backed by a lifetime warranty and is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of trailers can use the Bearing Buddy 42202?\u003c\/strong\u003e The Bearing Buddy 42202 is used on boat trailers, utility trailers, and camper trailers with a 1.980 inches inside diameter hub bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the UPC 650209422020 correspond to?\u003c\/strong\u003e UPC 650209422020 corresponds to the Bearing Buddy 42202 (model 1980A) chrome-plated bearing protector.\u003c\/p\u003e","brand":"Bearing Buddy","offers":[{"title":"Default Title","offer_id":49031068549339,"sku":"B-B-42202","price":21.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71HdcrHS12L.jpg?v=1785207890"},{"product_id":"bearing-buddy-1980ss-stainless-steel-bearing-protector-1-980-inch-sold-as-a-pair","title":"Bearing Buddy 1980ss Stainless Steel Bearing Protector, 1.980 Inch, Sold as a Pair","description":"\u003cp\u003eThe Bearing Buddy 1980ss is a stainless steel bearing protector sized to the 1.980 inch bore designation, sold as a matched pair (two per card) so both hubs on an axle are covered from a single purchase. Stainless steel construction gives the protector resistance to the corrosion that boat trailer hubs are regularly exposed to when backing a trailer into salt or fresh water. Each pair is packaged together under the single 1980ss part number, making it straightforward to order the correct quantity for a standard two-wheel axle without having to calculate protectors per hub separately. This is a hub bearing accessory intended for trailer hub and bearing applications, where the 1.980 inch size must match the bearing protector bore already in use on the hub. The product ships as a set at 1.5 pounds total. Because it is identified by the 1.980 inch size and stainless steel material rather than a vehicle-specific fitment listing, buyers should confirm the 1.980 inch bore matches their existing hub bearing protector before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bearing Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1980ss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Protector Size:\u003c\/strong\u003e 1.980 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 per card (sold as a pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 650209421047\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Bearing Buddy 1980ss bearing protector?\u003c\/strong\u003e The 1980ss is sized to a 1.980 inch bore, which is the size designation built into its part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bearing Buddy 1980ss made of stainless steel?\u003c\/strong\u003e Yes, the 1980ss bearing protector is made of stainless steel for corrosion resistance in wet trailer hub environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bearing protectors come in one 1980ss package?\u003c\/strong\u003e Two bearing protectors ship together as a pair under the single 1980ss part number, covering both hubs on a standard axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy a single Bearing Buddy 1980ss unit instead of a pair?\u003c\/strong\u003e No, the 1980ss is packaged and sold as a pair (2 per card), not as an individual unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bearing Buddy 1980ss weigh?\u003c\/strong\u003e The 1980ss pair weighs 1.5 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Bearing Buddy 1980ss?\u003c\/strong\u003e The UPC for the Bearing Buddy 1980ss stainless bearing protector is 650209421047.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the Bearing Buddy 1980ss?\u003c\/strong\u003e The 1980ss falls under trailer hubs and bearings, specifically as a bearing protector accessory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 1980ss size need to match my existing hub hardware?\u003c\/strong\u003e Yes, the 1980ss is identified by its 1.980 inch bore size, so it should match the bearing protector size already fitted to your hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the 1980ss bearing protector?\u003c\/strong\u003e The 1980ss is manufactured by Bearing Buddy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose stainless steel for a bearing protector like the 1980ss?\u003c\/strong\u003e Stainless steel resists the corrosion that trailer hub hardware is exposed to from repeated water contact, which is the material used in the Bearing Buddy 1980ss.\u003c\/p\u003e","brand":"Bearing Buddy","offers":[{"title":"Default Title","offer_id":49031068582107,"sku":"B-B-1980SS","price":39.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/316kNRg2TYL.jpg?v=1785207890"},{"product_id":"bearing-buddy-42204-stainless-steel-bearing-protector-1-980-inch-hub-diameter-blue-grease-indicator","title":"Bearing Buddy 42204 Stainless Steel Bearing Protector, 1.980 Inch Hub Diameter, Blue Grease Indicator","description":"\u003cp\u003eThe Bearing Buddy 42204 is a pressurized stainless steel bearing protector built to stop the most common cause of trailer breakdowns: water-contaminated wheel bearings. It installs in place of a standard dust cap and uses a spring-loaded piston to hold a steady 3 psi of pressure inside the hub. That constant pressure keeps grease in and pushes water, mud, and road grit out, while a built-in pressure limit prevents overfilling or overpressurizing the hub, which would otherwise damage the inner seal.\u003c\/p\u003e\u003cp\u003eGrease is added directly through a grease fitting in the center of the piston, so bearings can be serviced without removing the unit. A blue lubricant indicator on the piston lets you check grease level at a glance: press the edge of the piston, and if it rocks or moves, the hub is properly filled; if it will not move, it is time to add more grease.\u003c\/p\u003e\u003cp\u003eBuilt entirely from stainless steel, the 42204 resists rust and corrosion in saltwater and other harsh environments and is manufactured in the USA. It fits hubs with a 1.980 inch inside diameter; measure the inside diameter of the trailer hub or the outside diameter of the dust cap before ordering to confirm fit, then tap the unit into place with a wood block and hammer. This is the version without a protective bra cover.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bearing Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 42204\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Bearing Protector without Bra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Hub Inside Diameter:\u003c\/strong\u003e 1.980 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Number:\u003c\/strong\u003e 1980\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Ball Bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricant Indicator:\u003c\/strong\u003e Blue visual indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 3 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 650209422044\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub does the Bearing Buddy 42204 fit?\u003c\/strong\u003e The Bearing Buddy 42204 only fits hubs with a 1.980 inch inside diameter, so measure the inside diameter of your trailer hub or the outside diameter of your current dust cap with a caliper before ordering to confirm a correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bearing Buddy 42204 made of?\u003c\/strong\u003e It is manufactured from stainless steel, which resists rust and corrosion even in saltwater and other harsh environments, and it is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know when to add more grease?\u003c\/strong\u003e Press the edge of the movable piston on the Bearing Buddy 42204: if it rocks or moves, the hub has enough grease; if the piston does not move at all, it is time to add more grease through the center grease fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much pressure does the bearing protector maintain?\u003c\/strong\u003e A spring-loaded piston inside the 42204 holds a steady 3 psi of pressure, which is enough to keep grease in and water, mud, and dust out without overpressurizing the hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan overfilling this bearing protector damage the hub seal?\u003c\/strong\u003e No, the Bearing Buddy 42204 limits internal pressure to 3 psi specifically to prevent overfilling and overpressurization, which is the condition that damages the inner seal on a hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this version include a protective bra cover?\u003c\/strong\u003e No, the 42204 is the version without a bra; it is the bearing protector unit only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bearing Buddy 42204 installed?\u003c\/strong\u003e After confirming the 1.980 inch hub inside diameter fits, the unit is tapped into place over the hub using a wood block and a hammer; no special tools are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight and bearing number apply to this part?\u003c\/strong\u003e The Bearing Buddy 42204 weighs 0.9 pounds and is built around bearing number 1980 with a ball bearing type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the blue indicator on the piston mean?\u003c\/strong\u003e The blue lubricant indicator is a built-in visual cue on the piston face that lets you check grease fill level without disassembling the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bearing Buddy 42204 just a dust cap replacement?\u003c\/strong\u003e It is more than a dust cap: the 42204 is a pressurized bearing cover and protector system that actively holds grease in and blocks out water and dirt, rather than simply capping the hub opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of lubricant does this bearing protector use?\u003c\/strong\u003e The Bearing Buddy 42204 is designed to be serviced with standard grease, added through the grease fitting in the center of the piston.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is the Bearing Buddy 42204 used on?\u003c\/strong\u003e It is used on trailer hubs to protect wheel bearings, including boat trailers, horse trailers, RVs, and utility trailers, provided the hub matches the 1.980 inch inside diameter.\u003c\/p\u003e","brand":"Bearing Buddy","offers":[{"title":"Default Title","offer_id":49031068614875,"sku":"B-B-42204","price":29.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71YRdOAFDjL.jpg?v=1785207893"},{"product_id":"bearing-buddy-42440-chrome-plated-wheel-bearing-protector-2-441-inch-inside-diameter-trailer-hub-cap","title":"Bearing Buddy 42440 Chrome Plated Wheel Bearing Protector, 2.441 Inch Inside Diameter Trailer Hub Cap","description":"\u003cp\u003eThe Bearing Buddy 42440 is a chrome-plated wheel bearing protector designed to keep marine, RV, ATV, and utility trailer hubs properly lubricated and sealed against water and dirt intrusion. It installs directly into the trailer hub in place of the factory dust cap, creating a pressurized bearing cover system rather than a simple static cap. Inside each unit is a spring-loaded piston that maintains a safe internal pressure, keeping grease pushed against the seals while automatically relieving excess pressure through a self-regulating valve so the inner seal is never damaged by overpressurization.\u003c\/p\u003e\u003cp\u003eBearing Buddy 42440 is built from chrome-plated stainless steel for corrosion resistance in both saltwater and freshwater environments, making it suited to boat trailers, campers, horse trailers, and other utility trailers that see regular exposure to moisture. It is sized for hubs with a 2.441 inch inside diameter, with an outside diameter of 2.5 inches and an item thickness of 2.44 inches. Each unit ships individually (1 count) and weighs 1.3 pounds. Installation is straightforward: measure the hub opening to confirm proper fit, then tap the unit into place using a wood block and hammer, checking that it seats securely before towing. The product is manufactured in the USA and quality inspected for a precise fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bearing Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 42440\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Number:\u003c\/strong\u003e 2441\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 3000.0886\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome-plated stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Roller Bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 2.441 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 2.44 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 650209424406\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub does the Bearing Buddy 42440 fit?\u003c\/strong\u003e The Bearing Buddy 42440 only fits hubs with a 2.441 inch inside diameter, and it has an outside diameter of 2.5 inches and a thickness of 2.44 inches, so measuring the hub opening before installation is important to confirm a secure fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pressure relief system work?\u003c\/strong\u003e A spring-loaded piston inside the Bearing Buddy 42440 keeps the hub pressurized to push grease against the seals, and a self-regulating valve automatically releases excess grease and pressure so the inner seal is not damaged by overpressurization.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bearing Buddy 42440 made of?\u003c\/strong\u003e It is made of chrome-plated stainless steel, which is corrosion resistant and suited to saltwater and freshwater trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bearing Buddy 42440 weigh?\u003c\/strong\u003e This unit weighs 1.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bearing Buddy 42440 installed?\u003c\/strong\u003e Installation involves measuring the hub for proper fit, then tapping the unit into the hub using a wood block and hammer; no special tools or experience are required, but installers should stop and check fit if it does not seat securely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes one Bearing Buddy 42440 come with a protective bra or cover?\u003c\/strong\u003e No, the 42440 is the bearing protector unit itself without a protective bra or cover included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bearing Buddy 42440 sold as a single unit or a pair?\u003c\/strong\u003e It ships as a single unit (unit count of 1), so a pair of hubs would require two units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat vehicles or trailers is the Bearing Buddy 42440 used on?\u003c\/strong\u003e The Bearing Buddy 42440 is used on boat trailers, RVs, ATVs, utility trailers, and horse trailers that use hubs with a 2.441 inch inside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lubricant is used with the Bearing Buddy 42440?\u003c\/strong\u003e It is designed for use with grease as the compatible lubricant, maintained under pressure inside the hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Bearing Buddy 42440 manufactured?\u003c\/strong\u003e The Bearing Buddy 42440 is manufactured in the USA.\u003c\/p\u003e","brand":"Bearing Buddy","offers":[{"title":"Default Title","offer_id":49031068647643,"sku":"B-B-42440","price":30.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71dCR3UQU5L.jpg?v=1785207893"},{"product_id":"reliable-bearings-lm-11910-bearing-race-1-7-trailer-hub-bearing-race","title":"Reliable Bearings LM-11910 Bearing Race 1.7 - Trailer Hub Bearing Race","description":"\u003cp\u003eThe Reliable Bearings LM-11910 Bearing Race 1.7 is a replacement bearing race designed for trailer hub and bearing assemblies. A bearing race provides the hardened, precision-machined surface that the wheel bearing rides against inside the hub, and replacing a worn or pitted race along with its matching bearing helps keep the hub assembly running true and reduces the risk of premature bearing failure. This race is sold as a standalone component for trailer hub service and rebuild work.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e LM-11910\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this bearing race?\u003c\/strong\u003e This bearing race is Reliable Bearings part number LM-11910.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a bearing race used for?\u003c\/strong\u003e The LM-11910 bearing race provides the hardened inner surface inside a trailer hub that the wheel bearing rolls against, and it is typically replaced together with its matching bearing during hub service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this race sold with a matching bearing?\u003c\/strong\u003e The LM-11910 is sold as a bearing race component; check your hub kit or existing hardware to confirm the matching bearing needed for a complete rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the LM-11910?\u003c\/strong\u003e Reliable Bearings lists the LM-11910 under trailer hubs and bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the LM-11910 bearing race weigh?\u003c\/strong\u003e The LM-11910 bearing race weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the LM-11910 bearing race?\u003c\/strong\u003e The LM-11910 bearing race is made by Reliable Bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this race be used for a trailer hub rebuild?\u003c\/strong\u003e Yes, the Reliable Bearings LM-11910 is intended for trailer hub and bearing service and rebuild work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LM-11910 a genuine Reliable Bearings part?\u003c\/strong\u003e Yes, LM-11910 is the genuine Reliable Bearings manufacturer part number for this bearing race.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302185179,"sku":"REL-LM-11910","price":7.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_005c11e6-b237-46a3-98e4-f61e0e6bb8f7.jpg?v=1785348730"},{"product_id":"reliable-bearings-l-44643-trailer-wheel-bearing","title":"Reliable Bearings L-44643 Trailer Wheel Bearing","description":"\u003cp\u003eThe Reliable Bearings L-44643 is a wheel bearing designed for trailer hub and axle assemblies. It is built to support the rotating wheel hub on a trailer axle, helping keep the wheel turning smoothly under load. This bearing falls within the Trailer Hubs and Bearings category and is sold as a single unit weighing 1 pound.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e L-44643\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this wheel bearing?\u003c\/strong\u003e The part number is L-44643, manufactured by Reliable Bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the L-44643?\u003c\/strong\u003e Reliable Bearings L-44643 is listed in the Trailer Hubs and Bearings category, indicating it is used in trailer wheel hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the L-44643 wheel bearing weigh?\u003c\/strong\u003e The L-44643 wheel bearing weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the L-44643 wheel bearing?\u003c\/strong\u003e The L-44643 wheel bearing is made by Reliable Bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the L-44643 sold as a single bearing or a set?\u003c\/strong\u003e The L-44643 from Reliable Bearings is sold as a single wheel bearing unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the L-44643 bearing used for?\u003c\/strong\u003e Reliable Bearings L-44643 is a wheel bearing intended for trailer hub applications, supporting the rotating wheel hub on a trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the listing specify exact trailer models or axle types for the L-44643?\u003c\/strong\u003e Specific trailer makes, axle sizes, or model fitment for the Reliable Bearings L-44643 are not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the L-44643 wheel bearing made from?\u003c\/strong\u003e The material composition of the Reliable Bearings L-44643 wheel bearing is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for the L-44643?\u003c\/strong\u003e No OEM cross-reference or replacement part numbers are listed for the Reliable Bearings L-44643.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when ordering the L-44643?\u003c\/strong\u003e The Reliable Bearings L-44643 is sold as the wheel bearing itself; no additional included components are specified.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302119643,"sku":"REL-L-44643","price":11.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_bda0144d-2be3-42eb-81c1-baa3af835490.jpg?v=1785348730"},{"product_id":"reliable-bearings-bearing-race-l-44610-for-1-9-inch-trailer-hubs","title":"Reliable Bearings Bearing Race L-44610 for 1.9 Inch Trailer Hubs","description":"\u003cp\u003eThe Reliable Bearings Bearing Race L-44610 is a bearing cup designed for use in 1.9 inch trailer hubs. A bearing race provides the hardened, precision-ground inner surface that the tapered rollers of a wheel bearing ride against inside the hub bore. Installing a race that is worn, pitted, or scored alongside a new bearing is a common source of premature bearing failure, so this race is intended to be replaced as a set with its matching bearing whenever a hub is serviced.\u003c\/p\u003e\u003cp\u003eThis part is sold as the race component only, sized for the 1.9 inch hub bearing family commonly found on boat and utility trailers. Keeping the race and bearing matched ensures proper load distribution and rotation inside the hub, which supports smooth wheel operation and helps prevent overheating at the wheel end of the trailer axle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e L-44610\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bearing Race\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Size:\u003c\/strong\u003e 1.9 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings L-44610 used for?\u003c\/strong\u003e The L-44610 is a bearing race for 1.9 inch trailer hubs, providing the hardened surface that the wheel bearing rollers ride on inside the hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the L-44610 come with the matching bearing?\u003c\/strong\u003e No, the L-44610 is the bearing race only. It is designed to be paired with its matching bearing when servicing a 1.9 inch trailer hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub size is the L-44610 race designed for?\u003c\/strong\u003e This race is sized for 1.9 inch trailer hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the L-44610 bearing race weigh?\u003c\/strong\u003e The L-44610 weighs 1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould the race be replaced when replacing the bearing?\u003c\/strong\u003e Yes, replacing the L-44610 race along with its bearing is recommended, since a worn or scored race can cause premature failure of a new bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the L-44610 bearing race?\u003c\/strong\u003e The L-44610 bearing race is made by Reliable Bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailers use the L-44610 race?\u003c\/strong\u003e The L-44610 is used in 1.9 inch hub assemblies typical of boat and utility trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the L-44610?\u003c\/strong\u003e The L-44610 falls under trailer hubs and bearings, specifically as a bearing race component.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302217947,"sku":"REL-L-44610","price":6.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_1a9f3bea-a067-4827-99f5-70a2358d1217.jpg?v=1785348730"},{"product_id":"reliable-bearings-wheel-seal-1-986-trailer-hub-grease-seal-part-number-sl-122-1","title":"Reliable Bearings Wheel Seal 1.986 - Trailer Hub Grease Seal, Part Number SL-122-1","description":"\u003cp\u003eThe Reliable Bearings Wheel Seal 1.986 (part number SL-122-1) is a trailer hub grease seal sized for a 1.986 inch application, designed to keep wheel bearing grease contained within the hub while blocking water, dirt, and road debris from reaching the bearings. It is intended for use in trailer hub and bearing assemblies as part of routine bearing service or hub repack, sitting behind the inner wheel bearing to form the barrier between the hub cavity and the outside environment.\u003c\/p\u003e\u003cp\u003eInstalling a wheel seal in the correct size is a critical step whenever a trailer hub is repacked or a wheel bearing is replaced, since a worn, cracked, or incorrectly sized seal is one of the most common causes of grease loss and subsequent bearing failure. The Wheel Seal 1.986 from Reliable Bearings is built to the 1.986 inch dimension called out in its name, making it suited to trailer hub bores that require this specific size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-122-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Seal Size:\u003c\/strong\u003e 1.986 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings Wheel Seal 1.986 used for?\u003c\/strong\u003e The Wheel Seal 1.986, part number SL-122-1 from Reliable Bearings, is used in trailer hub and wheel bearing assemblies to retain grease inside the hub and keep water and debris out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SL-122-1 wheel seal?\u003c\/strong\u003e SL-122-1 is sized to a 1.986 inch nominal dimension, as reflected in its Wheel Seal 1.986 product name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Reliable Bearings SL-122-1 wheel seal weigh?\u003c\/strong\u003e This wheel seal weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does SL-122-1 belong to?\u003c\/strong\u003e SL-122-1 is listed under Trailer Hubs and Bearings, reflecting its use as a component in trailer hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace a trailer wheel seal like the SL-122-1?\u003c\/strong\u003e A trailer wheel seal such as the Reliable Bearings SL-122-1 should be replaced any time the hub is opened for bearing service or repack, since reusing an old seal risks grease leakage and bearing damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Wheel Seal 1.986 a genuine Reliable Bearings part?\u003c\/strong\u003e Yes, part number SL-122-1 is a Reliable Bearings branded Wheel Seal 1.986.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SL-122-1 wheel seal come with the wheel bearings included?\u003c\/strong\u003e SL-122-1 is the wheel seal itself; it is a standalone seal component rather than a bundled bearing kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if I install the wrong size wheel seal on my trailer hub?\u003c\/strong\u003e Installing a seal that does not match the hub bore, rather than a correctly sized part like the 1.986 inch SL-122-1, can allow grease to leak out or water to enter, leading to premature bearing failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SL-122-1 wheel seal be reused after removing a hub?\u003c\/strong\u003e No, wheel seals such as the SL-122-1 are designed for one-time installation and should be replaced, not reused, once a hub has been disassembled.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302316251,"sku":"REL-SL-122-1","price":2.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_38f6d0c4-1503-47ab-9713-c13cc608b249.jpg?v=1785348741"},{"product_id":"reliable-bearings-wheel-seal-1-986-inch-trailer-hub-and-bearing-grease-seal-sl-123","title":"Reliable Bearings Wheel Seal 1.986 Inch, Trailer Hub and Bearing Grease Seal, SL-123","description":"\u003cp\u003eThe Reliable Bearings SL-123 is a wheel seal sized 1.986 inches, designed to retain grease and keep out water, dirt, and road debris in trailer hub and bearing assemblies. It is built for use in trailer hub and bearing applications, where a reliable seal at the hub is essential to keeping the wheel bearings properly lubricated and protected during towing.\u003c\/p\u003e\u003cp\u003eWheel seals like the SL-123 sit at the inner end of the hub, forming a barrier between the bearing grease cavity and the outside environment. A properly sized and installed seal helps prevent premature bearing wear and failure caused by water intrusion or grease loss, which is a common cause of roadside breakdowns on boat trailers and utility trailers alike. The 1.986 inch nominal size refers to the seal's dimension, so it should be matched against the hub bore and spindle it will be installed on before ordering.\u003c\/p\u003e\u003cp\u003eThis seal is sold as a standalone replacement part, allowing trailer owners and repair shops to replace a worn or leaking seal without purchasing a full hub kit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-123\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Size:\u003c\/strong\u003e 1.986 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings SL-123 wheel seal used for?\u003c\/strong\u003e The SL-123 is a wheel seal used in trailer hub and bearing assemblies to retain grease and keep contaminants out of the bearing cavity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SL-123 wheel seal?\u003c\/strong\u003e This seal has a nominal size of 1.986 inches, which should be checked against your hub's bore dimension before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SL-123 wheel seal weigh?\u003c\/strong\u003e The Reliable Bearings SL-123 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the SL-123 wheel seal?\u003c\/strong\u003e The SL-123 is manufactured by Reliable Bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-123 sold as a single seal or as a kit?\u003c\/strong\u003e The SL-123 is sold as a standalone wheel seal, not as part of a bundled hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does a wheel seal like the SL-123 install on a trailer hub?\u003c\/strong\u003e A wheel seal sits at the inner end of the trailer hub, sealing the grease cavity that surrounds the wheel bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace a wheel seal such as the SL-123?\u003c\/strong\u003e A wheel seal like the SL-123 is typically replaced when the original seal is leaking grease or has hardened and cracked, which can allow water into the bearing cavity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SL-123 fit any trailer hub?\u003c\/strong\u003e The SL-123's fit depends on matching its 1.986 inch nominal size to your specific trailer hub bore, so confirm the dimension before installing it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if a trailer wheel seal fails?\u003c\/strong\u003e If a wheel seal such as the SL-123 fails, grease can leak out and water can enter the hub, leading to accelerated bearing wear or bearing failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Reliable Bearings SL-123 a category for boat trailers?\u003c\/strong\u003e The SL-123 falls under the Trailer Hubs and Bearings category and is suited to trailer hub applications generally.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302349019,"sku":"REL-SL-123","price":1.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_d9523f9d-7a3d-4d30-9b6a-611dcdc11bc1.jpg?v=1785348735"},{"product_id":"reliable-bearings-sl-150-wheel-seal-for-trailer-hubs-and-bearings","title":"Reliable Bearings SL-150 Wheel Seal for Trailer Hubs and Bearings","description":"\u003cp\u003eThe Reliable Bearings SL-150 is a wheel seal designed for trailer hub and bearing assemblies. It fits into the hub to help retain bearing grease and keep out water, dirt, and road debris, protecting the wheel bearings from contamination and premature wear. This is a replacement part intended for use during hub bearing service or repack, and is sized for use within the trailer hubs and bearings category.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wheel Seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings SL-150?\u003c\/strong\u003e The SL-150 is a wheel seal made by Reliable Bearings for use in trailer hub and bearing assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this seal used for?\u003c\/strong\u003e It is installed in a trailer hub to help retain bearing grease and block out water, dirt, and road debris during normal trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SL-150 weigh?\u003c\/strong\u003e The Reliable Bearings SL-150 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-150 a genuine Reliable Bearings part?\u003c\/strong\u003e Yes, SL-150 is the manufacturer part number assigned by Reliable Bearings to this wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace this seal?\u003c\/strong\u003e A trailer wheel seal like the SL-150 is typically replaced during hub bearing service, repacking, or when an existing seal is worn, cracked, or leaking grease.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the SL-150?\u003c\/strong\u003e The SL-150 is categorized as a trailer hub and bearing component, specifically a wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SL-150 come with any other hardware?\u003c\/strong\u003e The SL-150 is the wheel seal itself; no additional hardware or components are specified with this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SL-150 be used on any trailer hub?\u003c\/strong\u003e The Reliable Bearings SL-150 is intended for trailer hub and bearing applications; specific hub or axle compatibility should be confirmed against your hub's seal requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-150 sold individually?\u003c\/strong\u003e The SL-150 is listed as a single wheel seal unit weighing 1 pound.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302381787,"sku":"REL-SL-150","price":1.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_9c2f29d3-0790-463c-8288-80b26c1cf78f.jpg?v=1785348736"},{"product_id":"reliable-bearings-wheel-seal-1-987-part-number-sl-150-1-trailer-hub-wheel-seal","title":"Reliable Bearings Wheel Seal 1.987, Part Number SL-150-1, Trailer Hub Wheel Seal","description":"\u003cp\u003eThe Reliable Bearings Wheel Seal 1.987 (part number SL-150-1) is a trailer hub wheel seal sized to the 1.987 nominal seal specification, a size commonly used across trailer hub and bearing assemblies. It is designed to seal the inner hub cavity, keeping grease inside the hub and contaminants such as water, dirt, and road debris out, which helps protect the wheel bearings from premature wear and corrosion. This seal is categorized under trailer hubs and bearings, making it a replacement component for trailer hub service and maintenance work where a 1.987-size wheel seal is called for.\u003c\/p\u003e\u003cp\u003eAt 1 pound, this is a standard single-unit wheel seal intended to be installed as part of routine trailer hub bearing maintenance or a full bearing repack service. Always confirm your hub's seal bore and shaft dimensions match the 1.987 sizing before ordering, since wheel seals are sized precisely to the hub they are installed in.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-150-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Wheel Seal 1.987\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings Wheel Seal 1.987?\u003c\/strong\u003e It is a trailer hub wheel seal, part number SL-150-1, from Reliable Bearings, sized to the 1.987 nominal wheel seal specification used in trailer hub and bearing assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is part number SL-150-1 used for?\u003c\/strong\u003e SL-150-1 is used as a wheel seal in trailer hub assemblies, sealing the hub cavity to retain grease and keep out contaminants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this wheel seal weigh?\u003c\/strong\u003e The Reliable Bearings Wheel Seal 1.987 (SL-150-1) weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this part fall under?\u003c\/strong\u003e SL-150-1 is categorized as a Trailer Hub \u0026amp; Bearing part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Wheel Seal 1.987 come with mounting hardware or a bearing kit?\u003c\/strong\u003e This listing is for the wheel seal itself, part number SL-150-1; no additional components are specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 1.987 in the product name refer to?\u003c\/strong\u003e The 1.987 designation identifies the nominal size of this wheel seal, part number SL-150-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Reliable Bearings SL-150-1 seal sold individually?\u003c\/strong\u003e Yes, the Wheel Seal 1.987 (SL-150-1) is a single wheel seal unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number SL-150-1?\u003c\/strong\u003e Part number SL-150-1 is made by Reliable Bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for this seal?\u003c\/strong\u003e No OEM cross-reference numbers are listed for the Reliable Bearings SL-150-1 wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace a trailer wheel seal like the SL-150-1?\u003c\/strong\u003e A trailer wheel seal such as the Reliable Bearings SL-150-1 is typically replaced during hub bearing service to maintain a proper grease seal in the hub.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302414555,"sku":"REL-SL-150-1","price":2.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_70ec595e-76dc-45da-8ba8-63f87ef0f66c.jpg?v=1785348741"},{"product_id":"reliable-bearings-wheel-seal-2-627-inch-part-sl-151-for-trailer-hubs-and-bearings","title":"Reliable Bearings Wheel Seal 2.627 Inch, Part SL-151, for Trailer Hubs and Bearings","description":"\u003cp\u003eThe Reliable Bearings Wheel Seal 2.627 (part number SL-151) is a trailer hub wheel seal sized to a 2.627 inch diameter, built for use in trailer hub and bearing assemblies. A wheel seal of this type is installed at the inner end of the hub to retain bearing grease inside the hub cavity while keeping water, dirt, and road debris from reaching the bearings and spindle. Maintaining a proper seal at this location is a key part of keeping wheel bearings lubricated and protected between service intervals, which helps prevent premature bearing wear or failure.\u003c\/p\u003e\u003cp\u003eThis seal is sold under the Reliable Bearings brand as part SL-151 and is intended as a replacement or service part for trailer hub and bearing assemblies using a 2.627 inch seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-151\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Diameter:\u003c\/strong\u003e 2.627 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the diameter of the Reliable Bearings SL-151 wheel seal?\u003c\/strong\u003e The Reliable Bearings SL-151 wheel seal has a diameter of 2.627 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SL-151 wheel seal weigh?\u003c\/strong\u003e This wheel seal weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this wheel seal used for?\u003c\/strong\u003e The SL-151 is a wheel seal designed for trailer hub and bearing assemblies, where it retains grease inside the hub while blocking water and debris from reaching the bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of parts does the SL-151 belong to?\u003c\/strong\u003e SL-151 is listed under trailer hubs and bearings, making it a hub-side service part rather than a bearing itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-151 a bearing or a seal?\u003c\/strong\u003e SL-151 is a wheel seal, not a bearing, and is used alongside the wheel bearings in a trailer hub assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the SL-151 wheel seal?\u003c\/strong\u003e The SL-151 wheel seal is manufactured by Reliable Bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a trailer hub need a wheel seal?\u003c\/strong\u003e A wheel seal such as the SL-151 keeps bearing grease contained inside the hub and prevents water and dirt from entering, which protects the wheel bearings from contamination and dry-out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer hub does the 2.627 inch seal fit?\u003c\/strong\u003e The Reliable Bearings SL-151 is sized for hub applications calling for a 2.627 inch wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs SL-151 the full part number for this seal?\u003c\/strong\u003e Yes, SL-151 is the Reliable Bearings part number for this 2.627 inch wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SL-151 seal come with any other hardware?\u003c\/strong\u003e The SL-151 is sold as the wheel seal itself; no additional hardware or bearing components are specified with it.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302447323,"sku":"REL-SL-151","price":1.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_11f244fe-23fb-4156-b4d8-9fe77c3fa647.jpg?v=1785348741"},{"product_id":"reliable-bearings-wheel-seal-2-567-sl-162-trailer-hub-seal","title":"Reliable Bearings Wheel Seal 2.567 (SL-162) - Trailer Hub Seal","description":"\u003cp\u003eThe Reliable Bearings Wheel Seal 2.567, part number SL-162, is a trailer hub seal listed under Trailer Hubs \u0026amp; Bearings. It is identified by the 2.567 size designation in its product name and is intended for use in trailer hub and bearing assemblies where a wheel seal of this size is required.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-162\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2.567\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings SL-162 wheel seal used for?\u003c\/strong\u003e The Reliable Bearings Wheel Seal 2.567 (SL-162) is used in trailer hub and bearing assemblies, listed under the Trailer Hubs \u0026amp; Bearings category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this wheel seal?\u003c\/strong\u003e The part number is SL-162, made by Reliable Bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes this wheel seal?\u003c\/strong\u003e This wheel seal is made by Reliable Bearings, under part number SL-162.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SL-162 wheel seal weigh?\u003c\/strong\u003e The Reliable Bearings Wheel Seal 2.567 (SL-162) weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SL-162 wheel seal?\u003c\/strong\u003e This wheel seal is identified by the size designation 2.567, as reflected in its product name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the SL-162 wheel seal fall under?\u003c\/strong\u003e SL-162 is listed under the Trailer Hubs \u0026amp; Bearings category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers listed for this wheel seal?\u003c\/strong\u003e No OEM cross-reference numbers are listed for the Reliable Bearings SL-162 wheel seal; buyers should match by the 2.567 size designation and part number SL-162.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-162 a Reliable Bearings branded part?\u003c\/strong\u003e Yes, the Wheel Seal 2.567 with part number SL-162 is a Reliable Bearings branded product.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302480091,"sku":"REL-SL-162","price":1.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_1830861e-2c4c-4a9f-9a1b-20209ed13835.jpg?v=1785348746"},{"product_id":"reliable-bearings-wheel-seal-sl-173-2-569-inch-od-x-1-719-inch-id-x-0-500-inch-width-for-trailer-hubs-and-bearings","title":"Reliable Bearings Wheel Seal SL-173, 2.569 Inch OD x 1.719 Inch ID x 0.500 Inch Width, for Trailer Hubs and Bearings","description":"\u003cp\u003eThe Reliable Bearings SL-173 is a wheel seal sized for trailer hub and bearing assemblies, designed to keep grease inside the hub cavity while blocking water, dirt, and road grime from reaching the bearings. This is a common failure point on boat trailers and utility trailers that see regular submersion during boat launching and retrieval, making a properly sized, snug-fitting seal an important part of routine hub maintenance. The SL-173 is built to a 2.569 inch outer diameter, 1.719 inch inner diameter, and 0.500 inch width, so it is intended for hub bores and spindles matching those exact dimensions. Installing a wheel seal that does not match these measurements can allow grease to leak out or water to work its way into the bearing race, leading to premature bearing wear or failure. This seal falls in the Trailer Hubs and Bearings category and is typically replaced any time hub bearings are repacked or replaced, or whenever a seal shows signs of cracking, hardening, or leaking grease. Confirm your hub's OD, ID, and width against the SL-173 specifications below before ordering to make sure it is the correct seal for your application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-173\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wheel Seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 2.569 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter:\u003c\/strong\u003e 1.719 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 0.500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Reliable Bearings SL-173 wheel seal?\u003c\/strong\u003e The SL-173 measures 2.569 inches outer diameter, 1.719 inches inner diameter, and 0.500 inches in width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SL-173 wheel seal used for?\u003c\/strong\u003e It is used to seal trailer hub and bearing assemblies, keeping grease in and water and debris out, which falls under the Trailer Hubs and Bearings category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SL-173 wheel seal weigh?\u003c\/strong\u003e 1 pound is the weight of the Reliable Bearings SL-173 wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the SL-173 fit my trailer hub?\u003c\/strong\u003e Fit depends on matching your hub's exact bore and spindle dimensions to the SL-173 specifications of 2.569 inches OD, 1.719 inches ID, and 0.500 inches width; measure your hub before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace a trailer wheel seal like the SL-173?\u003c\/strong\u003e Replace it any time you repack or replace hub bearings, or as soon as a seal shows cracking, hardening, or grease leakage, since a worn seal lets water into the bearing race.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-173 a genuine Reliable Bearings part?\u003c\/strong\u003e Yes, SL-173 is the manufacturer part number for this Reliable Bearings wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the SL-173?\u003c\/strong\u003e An order of the Reliable Bearings SL-173 includes one wheel seal sized at 2.569 inches OD by 1.719 inches ID by 0.500 inches width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan boat trailer hubs use the SL-173 wheel seal?\u003c\/strong\u003e Yes, this seal is listed under the Trailer Hubs and Bearings category, which covers boat trailer hub applications where the dimensions match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my old seal matches the SL-173 dimensions?\u003c\/strong\u003e Measure the outer diameter, inner diameter, and width of the seal you are removing and compare them to the SL-173 specifications of 2.569 inches OD, 1.719 inches ID, and 0.500 inches width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SL-173 come with grease or other hub hardware?\u003c\/strong\u003e No, the SL-173 is the wheel seal only; it does not include grease, bearings, or other hub hardware.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302545627,"sku":"REL-SL-173","price":3.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_7f4666dd-82e9-4d37-80da-e24fb5df5af5.jpg?v=1785348736"},{"product_id":"reliable-bearings-wheel-seal-sl-188-for-trailer-hubs","title":"Reliable Bearings Wheel Seal SL-188 for Trailer Hubs","description":"\u003cp\u003eThe Reliable Bearings SL-188 is a wheel seal designed for trailer hub and bearing assemblies. A wheel seal of this type mounts at the inner end of the hub to retain bearing grease within the hub cavity and keep water, dirt, and road debris out of the bearing race, helping protect the wheel bearings from premature wear and grease loss.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-188\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings SL-188?\u003c\/strong\u003e The SL-188 is a wheel seal from Reliable Bearings, made for use in trailer hub and bearing assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a wheel seal like the SL-188 do?\u003c\/strong\u003e It seals the inner end of a trailer hub to keep bearing grease contained inside the hub while blocking water and dirt from reaching the wheel bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SL-188 wheel seal weigh?\u003c\/strong\u003e It weighs 1 pound, as listed for the Reliable Bearings SL-188.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the SL-188?\u003c\/strong\u003e The SL-188 falls under Trailer Hubs \u0026amp; Bearings, since it is a wheel seal used in trailer hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-188 an OEM part or an aftermarket replacement?\u003c\/strong\u003e The SL-188 is a Reliable Bearings branded wheel seal; no OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SL-188 come with any other hub hardware included?\u003c\/strong\u003e The SL-188 is the wheel seal itself; no additional hub or bearing hardware is specified as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the SL-188 wheel seal?\u003c\/strong\u003e Reliable Bearings manufactures the SL-188 wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-188 wheel seal used for boat trailers?\u003c\/strong\u003e It is categorized under Trailer Hubs \u0026amp; Bearings, indicating use in trailer hub and bearing assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the SL-188 is the correct seal for my hub?\u003c\/strong\u003e Compare the Reliable Bearings SL-188 part number against your hub's seal specification to confirm it is the correct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this Reliable Bearings wheel seal?\u003c\/strong\u003e The part number is SL-188.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302512859,"sku":"REL-SL-188","price":1.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_cda42c87-991e-436d-aadf-81744ff5f140.jpg?v=1785348746"},{"product_id":"reliable-bearings-wheel-seal-3-066-trailer-hub-bearing-seal-sl-200","title":"Reliable Bearings Wheel Seal 3.066, Trailer Hub Bearing Seal SL-200","description":"\u003cp\u003eThe Reliable Bearings SL-200 is a wheel seal manufactured to a 3.066 size, designed for use in trailer hub and bearing assemblies. It is intended to seal the hub cavity around the axle, helping keep grease inside the hub and contaminants such as water, dirt, and road debris out of the bearing area. This is a single-component replacement seal, sized specifically as SL-200 (3.066), so it is intended for hubs that call for this exact seal size rather than as a universal fit for all trailer hubs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wheel Seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3.066\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings SL-200 wheel seal used for?\u003c\/strong\u003e The SL-200 is a wheel seal used in trailer hub and bearing assemblies to retain grease inside the hub and keep out water, dirt, and debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the SL-200 wheel seal?\u003c\/strong\u003e This seal is manufactured to a 3.066 size, which is reflected in its part designation, Wheel Seal 3.066 (SL-200).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SL-200 wheel seal weigh?\u003c\/strong\u003e The Reliable Bearings SL-200 wheel seal weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the SL-200 fit any trailer hub?\u003c\/strong\u003e No. The SL-200 is sized specifically as a 3.066 seal, so it is intended for hubs that call for this exact seal size rather than for use as a universal fit across all trailer hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-200 a genuine Reliable Bearings part?\u003c\/strong\u003e Yes, SL-200 is the Reliable Bearings part number for this wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for the SL-200 seal?\u003c\/strong\u003e No cross-reference or replacement part numbers are listed for the Reliable Bearings SL-200 wheel seal; it should be ordered and matched by its 3.066 size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package with the SL-200?\u003c\/strong\u003e The SL-200 listing includes a single Reliable Bearings wheel seal, sized 3.066.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SL-200 wheel seal installed?\u003c\/strong\u003e The SL-200 is pressed into the hub's seal bore as part of a standard trailer hub and bearing service; confirm your hub's seal bore matches the 3.066 size before installing it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the SL-200?\u003c\/strong\u003e The Reliable Bearings SL-200 is classified as a trailer hub and bearing wheel seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SL-200 be reused after removal?\u003c\/strong\u003e Wheel seals such as the SL-200 are generally intended as a one-time replacement part installed new during hub or bearing service, though specific reuse guidance is not provided here.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302578395,"sku":"REL-SL-200","price":1.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_d1bc66c3-9dad-4ce4-a385-60a2a0fba057.jpg?v=1785348746"},{"product_id":"reliable-bearings-wheel-seal-sl-225-1-3-371-inch-trailer-hub-bearing-seal","title":"Reliable Bearings Wheel Seal SL-225-1, 3.371 Inch, Trailer Hub Bearing Seal","description":"\u003cp\u003eThe Reliable Bearings Wheel Seal SL-225-1 is a 3.371 inch trailer hub seal designed for use in trailer hub and bearing assemblies. It is part of the Trailer Hubs \u0026amp; Bearings product line and is built to keep the hub cavity sealed against water, dirt, and road debris while retaining the lubricant that protects the wheel bearings inside. A properly fitted wheel seal is one of the most important components in a trailer hub assembly: it prevents grease from leaking out and contaminants from working their way in, both of which are common causes of premature bearing failure on boat trailers, utility trailers, and other towed equipment. The SL-225-1 seal weighs 1 pound as packaged. Because the exact bore, shaft, and hub dimensions of a wheel seal must match the hub it is installed in, confirm that the 3.371 inch size matches your hub or bearing specification before ordering. This seal is sold as a standalone replacement part for hub servicing and bearing repacking jobs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SL-225-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3.371 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings SL-225-1?\u003c\/strong\u003e The SL-225-1 is a Reliable Bearings wheel seal sized at 3.371 inches, made for trailer hub and bearing assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 3.371 in the part name refer to?\u003c\/strong\u003e It is the size designation for the Reliable Bearings SL-225-1 wheel seal; confirm it matches your hub's seal specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this seal fit my trailer hub?\u003c\/strong\u003e Fitment depends on matching the 3.371 inch size of the SL-225-1 to your hub's seal bore; check your hub or bearing kit specification to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SL-225-1 wheel seal weigh?\u003c\/strong\u003e The Reliable Bearings SL-225-1 wheel seal weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the SL-225-1?\u003c\/strong\u003e It is listed under Trailer Hubs \u0026amp; Bearings, as it is a wheel seal used in trailer hub servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-225-1 a genuine Reliable Bearings part?\u003c\/strong\u003e Yes, the SL-225-1 is a Reliable Bearings branded wheel seal, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace a trailer wheel seal like the SL-225-1?\u003c\/strong\u003e A wheel seal such as the SL-225-1 is typically replaced during hub servicing or bearing repacking, or when the existing seal shows signs of grease leakage or wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SL-225-1 come with bearings included?\u003c\/strong\u003e The SL-225-1 is the wheel seal itself; it is sold as a standalone seal for trailer hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of a wheel seal like the SL-225-1 in a trailer hub?\u003c\/strong\u003e A wheel seal such as the SL-225-1 keeps grease inside the hub cavity and keeps water and debris out, protecting the wheel bearings from contamination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SL-225-1 sold individually?\u003c\/strong\u003e The SL-225-1 is a single wheel seal part; check the listing quantity for how many are included per order.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302643931,"sku":"REL-SL-225-1","price":3.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_eae96459-172d-4e40-9a73-cebe6b483a51.jpg?v=1785348746"},{"product_id":"reliable-bearings-boat-trailer-bearing-sn-750","title":"Reliable Bearings Boat Trailer Bearing SN-750","description":"\u003cp\u003eThe Reliable Bearings SN-750 is a boat trailer bearing built for use in trailer wheel hub assemblies. It is designed as a direct replacement component for boat trailer hubs, supporting the rotating wheel assembly under load as the trailer travels down the road. Reliable Bearings sells this part specifically within the boat trailer parts category, making it a straightforward choice when a trailer bearing needs to be replaced as routine maintenance or as part of a hub rebuild.\u003c\/p\u003e\u003cp\u003eAt 1 pound, the SN-750 is sized for typical boat trailer hub applications. Keeping trailer bearings in good condition is an important part of trailer upkeep, since worn or failing bearings can lead to hub overheating and wheel separation if left unaddressed. The SN-750 gives boat owners and trailer service shops a dedicated part number to order when a bearing replacement is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Reliable Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SN-750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Boat trailer wheel hub\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Reliable Bearings SN-750 used for?\u003c\/strong\u003e The SN-750 is a bearing used in boat trailer wheel hub assemblies, supporting the rotating wheel as the trailer is towed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number SN-750?\u003c\/strong\u003e SN-750 is manufactured by Reliable Bearings and is sold as a boat trailer part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SN-750 bearing weigh?\u003c\/strong\u003e The Reliable Bearings SN-750 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SN-750 a genuine Reliable Bearings part?\u003c\/strong\u003e Yes, SN-750 is the genuine Reliable Bearings manufacturer part number for this boat trailer bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the SN-750?\u003c\/strong\u003e The SN-750 is listed under boat trailer parts, specifically as a wheel hub bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SN-750 be used for routine trailer maintenance?\u003c\/strong\u003e Yes, boat trailer owners commonly order the Reliable Bearings SN-750 when replacing a worn or failing wheel bearing during routine maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a boat trailer bearing need to be replaced?\u003c\/strong\u003e Trailer bearings like the SN-750 wear over time and, if not replaced, can cause hub overheating or wheel separation, so timely replacement with a part such as this is important.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SN-750 come as a single bearing?\u003c\/strong\u003e The SN-750 is sold as the individual Reliable Bearings part identified by that manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho should install the SN-750 bearing?\u003c\/strong\u003e Bearing replacement on a boat trailer hub, including installing the Reliable Bearings SN-750, is typically done by someone comfortable with trailer hub maintenance or a trailer service shop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs SN-750 the correct part number to order for this bearing?\u003c\/strong\u003e Yes, SN-750 is the exact manufacturer part number to reference when ordering this Reliable Bearings boat trailer bearing.\u003c\/p\u003e","brand":"Reliable Bearings","offers":[{"title":"Default Title","offer_id":49031302676699,"sku":"REL-SN-750","price":2.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_c8566657-c2d5-4f66-a5a4-9ce8c1b02325.jpg?v=1785348736"},{"product_id":"bearing-buddy-bra-vinyl-grease-cap-covers-fits-b17-b19-b23-hub-sizes","title":"Bearing Buddy Bra Vinyl Grease Cap Covers - Fits B17, B19, B23 Hub Sizes","description":"\u003cp\u003eThe Bearing Buddy Bra is a flexible vinyl cover that snaps over your Bearing Buddy hub cap to catch the excess grease that the hub's pressure-relief system pushes out during towing. Instead of that grease being flung onto your wheels, tires, and the inside of your trailer fender, it collects harmlessly inside the Bra, keeping your rig cleaner and making it easy to spot when your bearings are being properly lubricated. Sold in pairs, one Bra covers both hubs on a single axle. Each Bra is molded from durable black vinyl designed to hold up to road grime, sun exposure, and grease contact over repeated launches and tows. Because Bearing Buddy hub caps come in several diameters, the Bra is offered in three sizes so you can match it to the specific Bearing Buddy model already installed on your trailer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Bearing Buddy\u003c\/li\u003e\n\u003cli\u003eMaterial: Black vinyl\u003c\/li\u003e\n\u003cli\u003ePackage quantity: 1 pair (2 covers) per package\u003c\/li\u003e\n\u003cli\u003eSold as an aftermarket accessory for Bearing Buddy hub caps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThe Bearing Buddy Bra is available in three sizes: B17, B19, and B23, each keyed to a specific range of Bearing Buddy hub cap model numbers. Before ordering, check the model number stamped on your existing Bearing Buddy hub cap and match it to the fitment list below. The B17 fits Bearing Buddy models 1781 and 1810. The B19 fits models 1980, 1980A, 1938, 1968, 2047, 2080, and 2080T. The B23 fits models 2328, 2441, 2717, 2562, and 2240. Choosing the wrong size will result in a loose or overly tight fit that will not seal correctly against grease.\u003c\/p\u003e","brand":"Bearing Buddy","offers":[{"title":"B17 - Fits Bearing Buddy 1781, 1810","offer_id":49049156714715,"sku":"B-B-B17","price":4.25,"currency_code":"USD","in_stock":false},{"title":"B19 - Fits Bearing Buddy 1980, 1980A, 1938, 1968, 2047, 2080, 2080T","offer_id":49049156747483,"sku":"B-B-B19","price":4.25,"currency_code":"USD","in_stock":true},{"title":"B23 - Fits Bearing Buddy 2328, 2441, 2717, 2562, 2240","offer_id":49049156780251,"sku":"B-B-B23","price":5.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61pb3eJyQjL_fd7736c3-64ca-408d-9fe3-c6b4f1f41f48.jpg?v=1785452419"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/Dexter-5-Lug-4-and-a-half-inch-Bolt_3200--37000lbs-Axle-Bearing-and-Seal-Replacement-Kit-K71-059-00__14299.1747363799.500.750.jpg?v=1785356970","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trailering-trailer-hubs-bearings-axles-wheel-bearings-bearing-protectors.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}