{"title":"Trailer Hubs, Bearings \u0026 Axles","description":null,"products":[{"product_id":"1-2-20-zinc-plated-hex-lock-nut-for-trailer-brake-actuators-mpn-006-256-00","title":"Dexter Hex Lock Nut, 1\/2-20, Zinc Plated - Trailer Brake Actuator Hardware, Part 006-256-00","description":"\u003cp\u003eThe Dexter 006-256-00 is a hex lock nut sized for 1\/2-20 threaded studs and bolts, finished in zinc plating for corrosion resistance. It is used as trailer brake actuator hardware, securing components in the actuator assembly against loosening from vibration and repeated cycling during towing. The hex head allows the nut to be tightened and removed with a standard wrench or socket, and the lock feature is designed to hold torque over time rather than backing off under load. At 0.03 pounds, it is a small, lightweight fastener meant to be paired with the correct matching stud or bolt of the same 1\/2-20 thread pitch. This is a genuine Dexter part, identified by part number 006-256-00, intended as a direct replacement when the original hex lock nut on a trailer brake actuator is worn, corroded, or missing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-256-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hex Lock Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trailer Brake Actuator Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151186120\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the Dexter 006-256-00 hex lock nut?\u003c\/strong\u003e It is threaded 1\/2-20, so it should be paired with a stud or bolt of the same 1\/2-20 thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this lock nut have?\u003c\/strong\u003e The Dexter 006-256-00 hex lock nut is zinc plated for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 006-256-00 a genuine Dexter part?\u003c\/strong\u003e Yes, it is a genuine Dexter hex lock nut, identified by part number 006-256-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hex lock nut used for?\u003c\/strong\u003e The Dexter 006-256-00 is used as trailer brake actuator hardware, securing components in the actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 006-256-00 hex lock nut weigh?\u003c\/strong\u003e It weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size wrench or socket do I need to install the Dexter 006-256-00?\u003c\/strong\u003e It has a standard hex head, so it can be tightened or removed with a wrench or socket sized to its hex flats; the Dexter 006-256-00 does not require any special tooling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 006-256-00 come with the matching bolt or stud?\u003c\/strong\u003e No, the Dexter 006-256-00 is the hex lock nut only; the matching 1\/2-20 stud or bolt is a separate component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a lock nut instead of a standard hex nut on a trailer brake actuator?\u003c\/strong\u003e A lock nut such as the Dexter 006-256-00 is designed to resist loosening from vibration and repeated cycling, which is important on trailer brake actuator hardware that sees ongoing movement during towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter 006-256-00 hex lock nut?\u003c\/strong\u003e The UPC for this Dexter hex lock nut is 106151186120.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Dexter 006-256-00 be reused after removal?\u003c\/strong\u003e Lock nuts like the Dexter 006-256-00 are generally intended to be replaced once removed, since the locking feature can lose effectiveness after repeated use.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256281307,"sku":"DEX-006-256-00","price":1.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-1861200_lg__28644.1558140685.500.750.jpg?v=1785329085"},{"product_id":"dexter-005-059-00-tang-washer-for-e-z-lube-axles-1-14-uns-spindle-nut-fits-dexter-axles-prior-to-6-02","title":"Dexter Tang Washer 005-059-00, 1 3\/4 Inch 14 GA, for E-Z Lube Trailer Axle Spindle Nuts (Prior to 6\/02)","description":"\u003cp\u003eThe Dexter Tang Washer, part number 005-059-00, is a 1 3\/4 inch, 14 gauge washer used at the spindle nut on Dexter E-Z Lube trailer axles. Its tanged edge locks into the spindle to keep the washer from spinning while the spindle nut is torqued, helping maintain correct bearing preload on the axle. This washer is one of the components included in Dexter's Spindle Nuts \u0026amp; Washers Kit (K71-335-00), which is built for Dexter E-Z Lube axles with a 1 inch-14 UNS spindle thread, produced prior to 6\/02. It is a wear item commonly replaced during bearing service, hub repacking, or brake work on trailer axles, and keeping a spare on hand avoids delays when a tang washer is found damaged or missing during routine maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 005-059-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Description:\u003c\/strong\u003e Washer, Tang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 14 GA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327603207\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Dexter E-Z Lube axles, 1 inch-14 UNS (prior to 6\/02)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed In Kit:\u003c\/strong\u003e Spindle Nuts \u0026amp; Washers Kit K71-335-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Dexter E-Z Lube axles with 1 inch-14 UNS spindle threads, produced prior to 6\/02.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter tang washer 005-059-00 used for?\u003c\/strong\u003e It is a tang washer that sits at the spindle nut on Dexter E-Z Lube trailer axles, with its tanged edge locking into the spindle so the washer cannot spin while the spindle nut is torqued down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is washer 005-059-00?\u003c\/strong\u003e This Dexter tang washer measures 1 3\/4 inches and is made from 14 gauge material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this washer fit my trailer axle?\u003c\/strong\u003e Part 005-059-00 fits Dexter E-Z Lube axles with a 1 inch-14 UNS spindle thread, on axles produced prior to 6\/02. Check your axle's thread and production date before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 005-059-00 tang washer weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this washer sold as part of a kit?\u003c\/strong\u003e Yes, 005-059-00 is one of the components included in Dexter's Spindle Nuts \u0026amp; Washers Kit, K71-335-00, which also includes a tongue washer and hex nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should a tang washer be replaced?\u003c\/strong\u003e A tang washer like 005-059-00 is typically replaced during bearing service, hub repacking, or brake work if it is found bent, cracked, or worn where it locks against the spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 005-059-00 a genuine Dexter part?\u003c\/strong\u003e Yes, 005-059-00 is the genuine Dexter manufacturer part number for this tang washer, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'tang' mean on this washer?\u003c\/strong\u003e On the 005-059-00 washer, the tang is a small tab or flange along the edge that engages a slot on the spindle, preventing the washer from rotating as the spindle nut is tightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy this washer separately from the full kit?\u003c\/strong\u003e Yes, the Dexter tang washer 005-059-00 is available on its own as an individual replacement part in addition to being included in kit K71-335-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is 005-059-00?\u003c\/strong\u003e This Dexter tang washer is listed under boat trailer brakes, reflecting its use on braked trailer axle assemblies.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256314075,"sku":"DEX-005-059-00","price":1.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_005-059-00_Tang_Washer_1-3-4in_14GA__99318.1741879657.500.750.jpg?v=1785329093"},{"product_id":"dexter-006-257-00-hex-lock-nut-7-16-20-zinc-plated-trailer-brake-actuator-nut","title":"Dexter Hex Lock Nut 7\/16-20, Zinc Plated, 006-257-00","description":"\u003cp\u003eThe Dexter 006-257-00 is a 7\/16-20 hex lock nut with a zinc-plated finish, used as hardware for trailer brake actuators. The nut measures 0.25 inches thick and is designed to thread onto a 7\/16-20 stud or bolt while resisting loosening from vibration, a common requirement on trailer running gear and brake components. The zinc plating provides a protective, corrosion-resistant surface suited to the exposed conditions trailer hardware typically sees.\u003c\/p\u003e\u003cp\u003eThis is a small, precise replacement fastener rather than a full kit, making it useful when a single nut is lost, damaged, or worn during trailer brake actuator service or maintenance. At just 0.01 pounds, it ships easily alongside other small hardware items.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-257-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hex Lock Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 7\/16-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Category:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the Dexter 006-257-00 hex lock nut?\u003c\/strong\u003e The Dexter 006-257-00 is sized for a 7\/16-20 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this nut a locking style or a standard hex nut?\u003c\/strong\u003e It is a hex lock nut, part number 006-257-00, designed to resist loosening under vibration rather than a plain hex nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is the 006-257-00 nut?\u003c\/strong\u003e 0.25 inches thick, which is the full thickness of this Dexter hex lock nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this nut have?\u003c\/strong\u003e It has a zinc-plated finish, giving the Dexter 006-257-00 added corrosion resistance for exposed trailer hardware use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this nut typically used for?\u003c\/strong\u003e The Dexter 006-257-00 hex lock nut is used as hardware for trailer brake actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this nut weigh?\u003c\/strong\u003e 0.01 pounds, reflecting the small size of the Dexter 006-257-00 hex lock nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order just one nut, or does it only come in a kit?\u003c\/strong\u003e The 006-257-00 is sold as an individual hex lock nut, useful when only a single replacement fastener is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 006-257-00 genuine Dexter hardware?\u003c\/strong\u003e Yes, part number 006-257-00 is a genuine Dexter hex lock nut, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this nut resist corrosion in wet or road-salt conditions?\u003c\/strong\u003e The zinc plating on the Dexter 006-257-00 is intended to protect against corrosion, which suits the exposed conditions trailer brake actuator hardware is often subjected to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install the 006-257-00 nut?\u003c\/strong\u003e As a standard 7\/16-20 hex lock nut, the 006-257-00 installs with a wrench or socket sized to its hex head, matching typical hardware installation for trailer brake actuator components.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256346843,"sku":"DEX-006-257-00","price":1.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-2339100_lg__12952.1558140850.500.750.jpg?v=1785329085"},{"product_id":"dexter-006-109-00-5-8-18-90-degree-cone-wheel-nut-grade-8-zinc-plated","title":"Dexter 5\/8-18 90 Degree Cone Nut, Grade 8 Zinc Plated Trailer Axle Spindle Nut, Part 006-109-00","description":"\u003cp\u003eThe Dexter 006-109-00 is a 90 degree cone nut sized for 5\/8-18 threaded trailer axle spindles. It is used to secure and preload the wheel bearing assembly on the spindle end of a boat trailer axle, seating against the bearing race to hold proper bearing adjustment as the wheel rotates. The nut is manufactured to Grade 8 strength and finished with zinc plating for corrosion resistance in wet and road-salt trailer environments, making it a common replacement item during hub, bearing, or spindle service.\u003c\/p\u003e\u003cp\u003eThis cone nut measures 1.06 inches across the flats, so it accepts a standard wrench or socket sized to that dimension for installation and torque. It is sold individually and is intended as a direct fit for axles using a 5\/8-18 threaded spindle with a 90 degree cone-style bearing nut, the same style used across Dexter's light duty trailer axle line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-109-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cone Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNut Style:\u003c\/strong\u003e 90 degree cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcross Flats:\u003c\/strong\u003e 1.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles with a 5\/8-18 threaded spindle designed for a 90 degree cone nut.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the Dexter 006-109-00 cone nut fit?\u003c\/strong\u003e The Dexter 006-109-00 is sized for a 5\/8-18 threaded trailer axle spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wrench size do I need to install this nut?\u003c\/strong\u003e This cone nut measures 1.06 inches across the flats, so a wrench or socket sized to 1.06 inches is needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a 90 degree cone nut used for?\u003c\/strong\u003e A 90 degree cone nut seats against the wheel bearing race on a trailer axle spindle to hold proper bearing preload and adjustment as the wheel rotates, which is the function of the Dexter 006-109-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and finish is the 006-109-00 cone nut made of?\u003c\/strong\u003e It is a Grade 8 nut with a zinc plated finish, chosen for strength and corrosion resistance in trailer wheel-end service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cone nut weigh?\u003c\/strong\u003e The Dexter 006-109-00 cone nut weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cone nut sold as a single unit or in a set?\u003c\/strong\u003e The Dexter 006-109-00 is sold as a single individual cone nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cone nut fit any trailer axle spindle?\u003c\/strong\u003e It fits axle spindles that use a 5\/8-18 thread with a 90 degree cone nut style; check your spindle thread size and nut style before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace this cone nut?\u003c\/strong\u003e The 006-109-00 is typically replaced during wheel bearing service, hub repack, or spindle work where the original cone nut is worn, damaged, or removed for disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 006-109-00 an OEM or aftermarket part?\u003c\/strong\u003e The 006-109-00 is a genuine Dexter part manufactured for Dexter trailer axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this nut come with a matching washer or cotter pin?\u003c\/strong\u003e The Dexter 006-109-00 listing covers the cone nut only; washers, cotter pins, or other hardware are not included.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256412379,"sku":"DEX-006-109-00","price":1.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_006-109-00_Cone_Wheel_Nut_5-8-18_Grade_8_Zinc_Plated_1.06_AF__00185.1741882614.500.750.jpg?v=1785329081"},{"product_id":"90-degree-cone-nut-9-16-18-grade-5-zinc-plated-boat-trailer-wheel-lug-nut-mpn-006-060-00","title":"Dexter Cone Nut, 90 Degree, 9\/16-18 Thread, Grade 5, Zinc Plated, for Boat Trailer Brakes","description":"\u003cp\u003eThis Dexter cone nut (part number 006-060-00) is a 90 degree cone-style fastener designed for boat trailer brake assemblies. The 90 degree cone seat allows the nut to self-center and seat securely against the mating component, a design commonly used where standard flat-face hex nuts are not suitable for the assembly. It is machined with a 9\/16-18 thread and built to Grade 5 strength, giving it the load-bearing capacity expected of a structural fastener in a trailer brake system. The nut is finished with a zinc plating, which provides a protective barrier against corrosion, an important feature for hardware used in and around boat trailers that are regularly exposed to water, road spray, and launch-ramp conditions.\u003c\/p\u003e\u003cp\u003eAt 0.1 pounds, this is a small, lightweight component intended to be used as part of a larger boat trailer brake assembly rather than as a standalone part. It is categorized within boat trailer brake hardware and is sold under the Dexter brand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-060-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cone Nut, 90 Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 9\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone Angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327604020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat trailer brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 006-060-00 cone nut used for?\u003c\/strong\u003e The Dexter 006-060-00 is a 90 degree cone nut used as a fastener within boat trailer brake assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this cone nut have?\u003c\/strong\u003e This Dexter cone nut has a 9\/16-18 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade is the 006-060-00 cone nut rated?\u003c\/strong\u003e It is rated Grade 5, indicating the strength classification of the fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cone nut corrosion resistant?\u003c\/strong\u003e Yes, the Dexter 006-060-00 is zinc plated, which provides a protective finish against corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the cone seat on this nut?\u003c\/strong\u003e The cone seat on part number 006-060-00 is machined at 90 degrees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 006-060-00 cone nut weigh?\u003c\/strong\u003e This cone nut weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 006-060-00 cone nut made from?\u003c\/strong\u003e It is made from zinc-plated steel, consistent with its Grade 5 rating and zinc finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter cone nut sold individually?\u003c\/strong\u003e Yes, the 006-060-00 is a single cone nut component rather than a kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware does this part belong to?\u003c\/strong\u003e The 006-060-00 cone nut is categorized as boat trailer brake hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a cone nut different from a standard hex nut?\u003c\/strong\u003e A cone nut, like the Dexter 006-060-00, has an angled 90 degree seat rather than a flat face, allowing it to self-center against a matching tapered surface in the brake assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256445147,"sku":"DEX-006-060-00","price":2.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_006-060-00_Cone_Nut_90_Degree_9-16-18_Grade_5_Zinc_Plated__83778.1747363801.500.750.jpg?v=1785329083"},{"product_id":"dexter-7k-trailer-hub-and-drum-kit-6-on-5-50-bolt-circle-42mm-bearing-12-x-2-brakes-mpn-008-388-05","title":"Dexter 008-388-05 Trailer Hub and Drum Assembly, 7,000 lb, 42mm Bearing, 12 x 2 Inch Brakes","description":"\u003cp\u003eThe Dexter 008-388-05 is a trailer hub and drum assembly rated for 7,000 lb axle applications. It is built around a 42mm bearing setup and comes with bearing cups and wheel studs, so the core rotating and mounting hardware is ready to install as one unit rather than sourced piece by piece. The 1\/2 inch wheel studs are sized to accept standard 1\/2 inch lug nuts, and the drum is sized for 12 x 2 inch brakes, matching common 7,000 lb axle brake setups.\u003c\/p\u003e\u003cp\u003eThis assembly is intended as a direct replacement for a worn or damaged hub and drum on a 7,000 lb rated trailer axle using a 42mm bearing and 12 x 2 inch brakes. Because it ships as a complete hub and drum unit with cups and studs included, it simplifies a hub replacement job by reducing the number of separate parts that need to be matched and ordered. Confirm your trailer's axle capacity, bearing size, stud size, and brake size against the specifications below before ordering, since hub and drum assemblies are matched closely to these dimensions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-388-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hub and Drum Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Size:\u003c\/strong\u003e 42 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bearing cups and wheel studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 37.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load rating of the Dexter 008-388-05 hub and drum assembly?\u003c\/strong\u003e The Dexter 008-388-05 is rated for 7,000 pound axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing size does this hub and drum use?\u003c\/strong\u003e It is built around a 42mm bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size comes with the 008-388-05 assembly?\u003c\/strong\u003e 1\/2 inch wheel studs are included with the Dexter 008-388-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake size is this hub and drum sized for?\u003c\/strong\u003e It is sized for 12 x 2 inch brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 008-388-05 include the bearing cups and studs, or are those sold separately?\u003c\/strong\u003e Bearing cups and wheel studs are included with this hub and drum assembly, so it does not need to be paired with those parts separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 008-388-05 hub and drum weigh?\u003c\/strong\u003e The assembly weighs 37.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 008-388-05 a complete hub and drum, or just the drum?\u003c\/strong\u003e It is a complete hub and drum assembly, not a bare drum, and it comes with the bearing cups and wheel studs already included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 008-388-05 fit any 7,000 lb trailer axle?\u003c\/strong\u003e It is designed for 7,000 lb rated axles using a 42mm bearing, 1\/2 inch studs, and 12 x 2 inch brakes, so match those dimensions against your trailer's axle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, the 008-388-05 hub and drum assembly is a Dexter manufactured part identified by that part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 008-388-05?\u003c\/strong\u003e The hub and drum assembly ships with the bearing cups and wheel studs installed, ready to mount to the axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256707291,"sku":"DEX-008-388-05","price":249.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__18189.1747363879.500.750.jpg?v=1785329078"},{"product_id":"dexter-008-219-9g-hub-and-drum-kit-7-000-lb-7k-trailer-axle-8-on-6-50-bolt-pattern-5-8-studs-ez-lube","title":"Dexter 008-219-9G Hub and Drum Kit, 7000 lb Capacity, 5\/8 Inch Studs, EZ-Lube, 2.250 Inch","description":"\u003cp\u003eThe Dexter 008-219-9G is a heavy-duty hub and drum kit built for 7,000 lb capacity trailer axles, including boat trailer axles fitted with this stud and bearing configuration. The kit is designed around 5\/8 inch wheel studs and features EZ-Lube bearing protection, which allows grease to be added through a zerk fitting without disassembling the hub, making routine bearing maintenance faster and reducing the risk of running a bearing dry. The bearing and seal bore is sized to 2.250 inches, and the kit carries the 865 bearing set designation used by Dexter for this hub assembly.\u003c\/p\u003e\u003cp\u003eAs a hub and drum kit, the 008-219-9G is intended to supply the core rotating hardware needed at the wheel end of a compatible 7,000 lb axle, pairing the hub\/drum with its associated bearing set to support a full hub rebuild or upgrade. The complete kit weighs 41 pounds as shipped.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-219-9G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hub and Drum Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Lubrication:\u003c\/strong\u003e EZ-Lube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing\/Seal Bore Diameter:\u003c\/strong\u003e 2.250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Set Designation:\u003c\/strong\u003e 865\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 41 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327607113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity is the Dexter 008-219-9G hub and drum kit rated for?\u003c\/strong\u003e The 008-219-9G is built for a 7,000 lb capacity axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does this hub kit use?\u003c\/strong\u003e The Dexter 008-219-9G uses 5\/8 inch wheel studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does EZ-Lube mean on this hub kit?\u003c\/strong\u003e EZ-Lube is a bearing protector system that lets grease be pumped through a zerk fitting into the hub without removing the bearings, so the 008-219-9G can be re-greased quickly during routine maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 008-219-9G hub and drum kit weigh?\u003c\/strong\u003e This kit weighs 41 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bearing bore diameter on this Dexter kit?\u003c\/strong\u003e The bearing and seal bore on the 008-219-9G is sized to 2.250 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing set is included with this kit?\u003c\/strong\u003e The Dexter 008-219-9G carries the 865 bearing set designation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 008-219-9G a complete hub and drum, or bearings only?\u003c\/strong\u003e It is a hub and drum kit, supplying the hub and drum assembly along with its associated bearing set rather than bearings alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter hub kit?\u003c\/strong\u003e The UPC for the 008-219-9G is 840327607113.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 008-219-9G genuine Dexter hardware?\u003c\/strong\u003e Yes, it is sold under its Dexter manufacturer part number, 008-219-9G.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit fit boat trailer axles?\u003c\/strong\u003e The 008-219-9G is sized for 7,000 lb capacity axles with 5\/8 inch studs, a configuration commonly used on boat trailer axles built to that spec.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256805595,"sku":"DEX-008-219-9G","price":391.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-E-Z-Lube-12-inch-7K-Hub--Drum-Kit-008-219-9G__75144.1747363834.500.750.jpg?v=1785329078"},{"product_id":"7-200-lb-trailer-hub-and-drum-kit-8-on-6-50-bolt-pattern-9-16-studs-grease-lube-mpn-008-393-91","title":"Dexter Trailer Hub Kit 008-393-91, 7,200 lb Capacity, 9\/16 Inch Studs, Grease Lubrication with Cone Nuts","description":"\u003cp\u003eThe Dexter 008-393-91 is a heavy-duty trailer hub kit rated for a 7,200 lb capacity, built for trailer axles using 9\/16 inch wheel studs on a 4.75 inch pitch diameter. It is a grease-lubricated hub kit, meaning the bearing cavity is packed and sealed for grease service rather than an oil-bath design, and the kit includes the cone nuts needed to secure the wheel to the hub. This kit is compatible with hub part number 008-393-04, making it a straightforward match for trailers already built around that hub.\u003c\/p\u003e\u003cp\u003eBecause it is sized for 7,200 lb capacity axles, this kit suits mid-to-heavy tandem and single-axle utility, boat, and cargo trailers running 9\/16 inch stud hubs. The grease lubrication design simplifies routine maintenance compared to oil-bath hubs, since service only requires repacking rather than monitoring an oil level or seal integrity for leaks. Installers replacing worn hub hardware or servicing a hub that takes 9\/16 inch studs at a 4.75 inch pitch diameter can use this kit to restore the wheel-mounting hardware to factory-rated capacity.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-393-91\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,200 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Diameter:\u003c\/strong\u003e 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubrication Type:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Cone nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 49.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCompatible with hub part number 008-393-04\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Dexter 008-393-91 hub kit?\u003c\/strong\u003e The Dexter 008-393-91 hub kit is rated for a 7,200 pound capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does this hub kit use?\u003c\/strong\u003e This kit is built for 9\/16 inch wheel studs on a 4.75 inch pitch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 008-393-91 kit grease or oil lubricated?\u003c\/strong\u003e It is a grease-lubricated design, so the hub is packed and sealed for grease service rather than running as an oil bath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with cone nuts?\u003c\/strong\u003e Yes, cone nuts are included with the Dexter 008-393-91 hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub is the 008-393-91 kit compatible with?\u003c\/strong\u003e The 008-393-91 kit is compatible with hub part number 008-393-04.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 008-393-91 hub kit weigh?\u003c\/strong\u003e The kit weighs 49.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer axle is this hub kit suited for?\u003c\/strong\u003e Rated at 7,200 pounds capacity with 9\/16 inch studs, the 008-393-91 kit suits mid-to-heavy duty trailer axles built around that stud size and capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the pitch diameter matter when ordering this kit?\u003c\/strong\u003e The 4.75 inch pitch diameter of the 008-393-91 kit must match your existing hub so the studs and cone nuts line up correctly with the wheel bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used on an oil-bath hub?\u003c\/strong\u003e No, the 008-393-91 kit is designed for grease lubrication, not an oil-bath hub, so it should be matched to a hub built for grease service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter 008-393-91 kit?\u003c\/strong\u003e The kit includes the hardware needed for a 9\/16 inch stud, 4.75 inch pitch diameter grease hub, including cone nuts, at a 7,200 pound capacity rating.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256871131,"sku":"DEX-008-393-91","price":488.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-8-on-6.5-7.2k-hub-drum-kit-post-1999-008-393-91__30616.1747363836.500.750.jpg?v=1785329093"},{"product_id":"dexter-008-430-90-oil-hub-and-drum-kit-9k-10k-general-duty-trailer-axle-8-on-6-5in-5-8in-studs-with-cone-nuts","title":"Dexter 90 Degree Cone Nut 008-430-90 for Clamp Ring Hub Assemblies, 9,000-15,000 lb Axles","description":"\u003cp\u003eThe Dexter 90 Degree Cone Nut, part number 008-430-90, is the specified fastener for hub assemblies that use a clamp ring on Dexter medium duty trailer axles. It is designed to seat against the clamp ring to properly preload and retain the wheel bearings on one-piece hub assemblies. This cone nut is used on 9K, 10K, and #13G General Duty one-piece hubs within Dexter's medium duty axle line, which covers axle capacities from 9,000 to 15,000 pounds.\u003c\/p\u003e\u003cp\u003eWhen a clamp ring is present on the hub assembly, the 90 degree cone nut is the required fastener; the flange nut is only used as an alternate when a clamp ring is not part of the assembly. Selecting the correct nut for the hub configuration is important for proper bearing preload and safe hub operation. This part is sold as the genuine Dexter cone nut for these applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-430-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 90 Degree Cone Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Clamp Ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Fastener:\u003c\/strong\u003e Flange Nut (used when no clamp ring is present)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 9K, 10K, and #13G General Duty One-Piece Hubs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 9,000-15,000 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter medium duty trailer axles, 9,000-15,000 lb capacity, one-piece hub assemblies (9K, 10K, #13G General Duty) fitted with a clamp ring\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 008-430-90 cone nut used for?\u003c\/strong\u003e The Dexter 008-430-90 is a 90 degree cone nut used to retain and preload the wheel bearings on hub assemblies that include a clamp ring on Dexter medium duty trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a clamp ring to use this cone nut?\u003c\/strong\u003e Yes. The 90 degree cone nut, part number 008-430-90, is specified for use with a clamp ring; if the hub assembly does not have a clamp ring, a flange nut is used as the alternate fastener instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a flange nut instead of the 008-430-90 cone nut?\u003c\/strong\u003e A flange nut is only the correct alternate fastener when there is no clamp ring on the hub assembly. Where a clamp ring is present, the Dexter 90 degree cone nut 008-430-90 must be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity range is this cone nut rated for?\u003c\/strong\u003e The Dexter 008-430-90 cone nut is used within Dexter's medium duty axle line, covering axle capacities of 9,000 to 15,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub types does the 008-430-90 cone nut fit?\u003c\/strong\u003e This cone nut is used on 9K, 10K, and #13G General Duty one-piece hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 008-430-90 a genuine Dexter part?\u003c\/strong\u003e Yes, part number 008-430-90 is a genuine Dexter 90 degree cone nut for one-piece hub assemblies with a clamp ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cone nut affect bearing preload?\u003c\/strong\u003e The 90 degree cone nut, 008-430-90, seats against the clamp ring on the hub assembly to properly preload and retain the wheel bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cone nut work on a one-piece hub without a clamp ring?\u003c\/strong\u003e The 008-430-90 cone nut is specified for one-piece hubs that include a clamp ring; hubs without a clamp ring instead use a flange nut as the alternate fastener.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257034971,"sku":"DEX-008-430-90","price":790.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-8-on-6.5-9k-10k-hub-drum-kit-2009-and-newer-008-430-90__47432.1747363836.500.750.jpg?v=1785329081"},{"product_id":"dexter-046-032-00-rubber-plug-for-oil-cap-fits-dexter-6-bolt-utility-hubs-2-5-8-12-thread","title":"Dexter Rubber Plug for Oil Cap, Fits 6 Bolt and Utility Hubs 2-5\/8-12 Thread","description":"\u003cp\u003eThis rubber plug is the replacement plug for the oil cap on Dexter trailer hubs, sold individually to service the oil-fill opening on the hub oil cap. It seals the fill port on Dexter 6 bolt and utility hubs, and is sized for the 2-5\/8 inch-12 thread oil cap used on those hubs. This plug is one of the components included in the Dexter Oil Cap, O-Ring \u0026amp; Plug Kit (K71-747-00), which also includes an O-ring and the oil cap itself, so it is a straightforward way to replace a lost, cracked, or worn plug without buying a full new cap assembly. Keeping the oil cap plug in good condition helps maintain a proper seal on the hub, which supports correct lubrication and helps keep water and debris out of the bearing area. Because it is made of rubber, it seats snugly in the cap opening and can be removed and reinserted for periodic oil level checks or topping off. This is a genuine Dexter part, so it matches the fit and thread specification of the original equipment cap rather than requiring a universal or adapted plug.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046-032-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Rubber Plug for Oil Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 2-5\/8 inch-12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter 6 bolt and utility hubs, 2-5\/8 inch-12 thread\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Dexter part 046-032-00?\u003c\/strong\u003e Dexter 046-032-00 is a rubber plug that fits into the oil cap on Dexter trailer hubs, sealing the oil-fill opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hubs does this plug fit?\u003c\/strong\u003e This plug fits Dexter 6 bolt and utility hubs that use a 2-5\/8 inch-12 thread oil cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this plug sold as part of a kit or individually?\u003c\/strong\u003e Dexter 046-032-00 can be purchased on its own as a replacement rubber plug, and it is also one of the components in the Dexter Oil Cap, O-Ring \u0026amp; Plug Kit, K71-747-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat else comes in the Oil Cap, O-Ring \u0026amp; Plug Kit?\u003c\/strong\u003e The kit that includes this rubber plug (046-032-00) also includes an O-ring (010-050-00) and the oil cap itself (021-036-00).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the plug made of?\u003c\/strong\u003e The Dexter 046-032-00 plug is made of rubber, which allows it to seat snugly in the oil cap opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e Dexter part 046-032-00 weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this plug?\u003c\/strong\u003e If the rubber plug on a Dexter hub oil cap is lost, cracked, or no longer sealing properly, 046-032-00 is the correct replacement part rather than replacing the entire oil cap assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this plug work with any trailer hub, or only Dexter hubs?\u003c\/strong\u003e This rubber plug is a Dexter part designed specifically for Dexter 6 bolt and utility hubs with a 2-5\/8 inch-12 thread oil cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, 046-032-00 is a genuine Dexter rubber plug, matching the fit and thread specification of the original equipment oil cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the oil cap this plug fits?\u003c\/strong\u003e The oil cap that this plug fits uses a 2-5\/8 inch-12 thread, per Dexter's specification for 6 bolt and utility hubs.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257526491,"sku":"DEX-046-032-00","price":1.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_046-032-00_Rubber_Plug_For_Oil_Cap-side-view__93004.1741891216.500.750.jpg?v=1785329091"},{"product_id":"dexter-046-052-00-oil-filler-plug-for-8-000-lb-oil-lube-trailer-hubs-rubber-fill-hole-plug","title":"Dexter Oil Filler Plug 046-052-00, Rubber, Trailer Hub Oil Bath Service Part","description":"\u003cp\u003eThe Dexter 046-052-00 is a rubber oil filler plug designed to seal the oil fill hole on Dexter trailer axle hub oil bath assemblies. This plug is sold as a service part only, meaning it is available as an individual replacement component rather than as part of a full hub kit -- ideal for trailer owners and service techs who need to replace a worn, cracked, or missing filler plug without purchasing an entire hub assembly.\u003c\/p\u003e\u003cp\u003eThe plug is made of rubber, which allows it to seat and seal securely in the fill hole to help keep the oil bath lubricant contained within the hub and keep contaminants out. Its compact size keeps it lightweight for easy handling and storage as a spare part. Because it is a genuine Dexter part identified by number 046-052-00, it is built to the same dimensions as the original equipment plug it replaces on applicable Dexter oil bath hub assemblies.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046-052-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e Oil Filler Plug (service part only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327619413\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Service part (sold individually)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 046-052-00?\u003c\/strong\u003e It is a rubber oil filler plug that seals the oil fill hole on a Dexter trailer axle hub oil bath assembly, part number 046-052-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sold as a full hub kit or an individual part?\u003c\/strong\u003e The 046-052-00 is listed as a service part only, meaning it is sold individually as a replacement plug rather than bundled with a full hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the plug made of?\u003c\/strong\u003e The 046-052-00 filler plug is made of rubber, which allows it to seat and seal against the fill hole opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the plug weigh?\u003c\/strong\u003e The Dexter oil filler plug 046-052-00 weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, 046-052-00 is the Dexter manufacturer part number for this oil filler plug, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this plug do on a trailer hub?\u003c\/strong\u003e It seals the oil fill opening on a Dexter oil bath hub assembly, helping keep the oil lubricant inside the hub and contaminants out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the listing include a gasket or O-ring?\u003c\/strong\u003e The 046-052-00 is the filler plug itself; no gasket or O-ring is included with this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this plug on any trailer hub?\u003c\/strong\u003e Confirm your hub uses a Dexter oil bath assembly designed for the 046-052-00 filler plug before ordering, since fitment varies by hub design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I identify the UPC for this part?\u003c\/strong\u003e The Dexter 046-052-00 oil filler plug carries UPC 840327619413.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the oil filler plug instead of the whole hub?\u003c\/strong\u003e Because 046-052-00 is offered as a standalone service part, a worn or damaged plug can be replaced on its own without buying a complete hub assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257755867,"sku":"DEX-046-052-00","price":2.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_046-052-00_Rubber_Plug_For_Oil_Fill_Hole__57856.1747363802.500.750.jpg?v=1785329089"},{"product_id":"dexter-double-eye-leaf-spring-4-000-lb-capacity-7-leaf-underslung-mpn-072-079-00","title":"Dexter 072-079-00 Double Eye Trailer Leaf Spring, 26 Inch, 4000 lb Capacity, 7-Leaf Underslung Design","description":"\u003cp\u003eThe Dexter 072-079-00 is a double eye trailer leaf spring built to handle a 4000-pound load capacity. It uses a 7-leaf underslung design, with the leaf pack mounted below the axle, to provide dependable load support and stable ride characteristics for trailers rated at this capacity. The double eye configuration places a mounting eye at each end of the spring, allowing it to connect directly to the trailer hanger and shackle mounts for controlled articulation as the trailer travels over uneven surfaces.\u003c\/p\u003e\u003cp\u003eConstruction is steel, and the spring carries a corrosion-resistant finish, making it a suitable choice for trailers that see regular exposure to moisture and saltwater, such as boat trailers and other marine equipment haulers. The spring measures 26 inches in length. As a genuine Dexter part, the 072-079-00 is intended as a direct fit for trailer applications engineered around this length, capacity, and leaf configuration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 072-079-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 4000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaf Count:\u003c\/strong\u003e 7 leaves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye Configuration:\u003c\/strong\u003e Double eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Design:\u003c\/strong\u003e Underslung\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327623298\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight capacity of the Dexter 072-079-00 leaf spring?\u003c\/strong\u003e The Dexter 072-079-00 double eye leaf spring is rated for a 4000-pound capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many leaves are in this spring?\u003c\/strong\u003e This spring uses a 7-leaf pack in an underslung design, part number 072-079-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Dexter 072-079-00 leaf spring?\u003c\/strong\u003e It measures 26 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 072-079-00 a double eye or slipper spring?\u003c\/strong\u003e It is a double eye spring, with a mounting eye at each end for hanger and shackle attachment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does underslung mean for this leaf spring?\u003c\/strong\u003e Underslung means the leaf pack sits below the axle, which is how the Dexter 072-079-00 is designed to mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this leaf spring suitable for a boat trailer?\u003c\/strong\u003e Yes, the corrosion-resistant finish on the Dexter 072-079-00 is designed to hold up to moisture and saltwater exposure typical of marine trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 072-079-00 leaf spring made of?\u003c\/strong\u003e It is built from steel leaves assembled into a 7-leaf pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the spring itself weigh?\u003c\/strong\u003e The Dexter 072-079-00 leaf spring weighs 21.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Dexter 072-079-00 leaf spring is 840327623298.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 072-079-00 a genuine Dexter part?\u003c\/strong\u003e Yes, 072-079-00 is the Dexter manufacturer part number for this double eye leaf spring.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258706139,"sku":"DEX-072-079-00","price":183.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-072-079-26-inch-4000lbs-7-Leaf-Underslung-Double-Eye-Leaf-Spring-top-down-view__20878.1741896608.500.750.jpg?v=1785187999"},{"product_id":"dexter-k08-201-1g-pre-greased-hub-and-drum-kit-5-2k-axle-6-on-5-5-bolt-pattern-2-125-seal","title":"Dexter Hub and Drum Kit K08-201-1G, 6K Axle, 6 on 5-1\/2 Inch Bolt Pattern, 2.125 Inch Seal","description":"\u003cp\u003eThe Dexter K08-201-1G is a pre-greased hub and drum kit built for 6K trailer axles using a 6 on 5-1\/2 inch wheel bolt pattern. It arrives factory-greased and ready to install, so it saves setup time and helps ensure the bearings are properly lubricated from the start. The kit is fitted with a 2.125 inch E-Z Lube seal, which keeps grease inside the hub while blocking dirt and water from reaching the bearings, supporting smooth, protected operation over time.\u003c\/p\u003e\u003cp\u003eMounting uses 1\/2-20 threaded studs for a strong, secure wheel attachment on 6K axle trailers. The kit includes the bearings and components needed for a complete hub-drum replacement, making it a straightforward option for routine maintenance or when upgrading worn trailer hub hardware. It is intended for 6K axles specified with a 6 on 5-1\/2 inch bolt pattern.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-201-1G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 6K (6,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 6 on 5-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Type:\u003c\/strong\u003e 2.125 inch E-Z Lube seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Thread Size:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Condition:\u003c\/strong\u003e Pre-greased\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 x 8 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 36.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007103\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle does the Dexter K08-201-1G hub and drum kit fit?\u003c\/strong\u003e The K08-201-1G is built for 6K trailer axles with a 6 on 5-1\/2 inch wheel bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit come pre-greased?\u003c\/strong\u003e Yes, the Dexter K08-201-1G ships pre-greased and ready to install, with the bearings already lubricated at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size seal does the K08-201-1G use?\u003c\/strong\u003e It uses a 2.125 inch E-Z Lube seal, which retains grease in the hub while keeping dirt and water out of the bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size are the mounting studs?\u003c\/strong\u003e The hub studs on the K08-201-1G are 1\/2-20 threaded for secure wheel attachment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearings included in this kit?\u003c\/strong\u003e Yes, the Dexter K08-201-1G includes the bearings along with the hub and drum components needed for a complete replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K08-201-1G hub and drum kit weigh?\u003c\/strong\u003e The Dexter K08-201-1G weighs 36.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bolt pattern on this hub and drum kit?\u003c\/strong\u003e It is a 6 on 5-1\/2 inch bolt pattern, matching common 6K axle wheel setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for routine hub maintenance?\u003c\/strong\u003e Yes, the K08-201-1G is suited for both routine hub-drum maintenance and replacement of worn hardware on 6K axle trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K08-201-1G a genuine Dexter part?\u003c\/strong\u003e Yes, K08-201-1G is the Dexter manufacturer part number for this hub and drum kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of this kit?\u003c\/strong\u003e The Dexter K08-201-1G ships in a package measuring 12 x 8 x 6 inches.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259033819,"sku":"DEX-K08-201-1G","price":322.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Pre-Greased-2-point-125-inch6000-Hub--Drum-Kit-K08-201-1G__40076.1747363798.500.750.jpg?v=1785188534"},{"product_id":"dexter-k08-174-90-wheel-drum-hub-kit-fits-7k-demountable-utg-axle-studded-2-125-seal-008-174-05-drum-lm67048-bearing","title":"Dexter K08-174-90 Hub and Drum Kit for Demountable 7K UTG Trailer Axle, Studded, 2.125 Inch Seal","description":"\u003cp\u003eThe Dexter K08-174-90 is a complete wheel-drum kit built for demountable 7K UTG trailer axles that use a studded hub and a 2.125 inch grease seal. Rather than sourcing individual hub, bearing, and hardware parts separately, this kit bundles the full set of components needed to rebuild or replace a demountable hub-and-drum assembly on a compatible axle, saving time on parts matching and ensuring the pieces are sized to work together correctly.\u003c\/p\u003e\u003cp\u003eAt the core of the kit is a cupped and studded wheel and drum assembly, paired with a bearing cone to support smooth wheel rotation under load. The kit also includes the grease seal sized for a 2.125 inch bore, a grease cap to keep the wheel bearing cavity packed and protected from road contamination, and the mounting hardware needed to secure the wheel and drum to the axle, including hex nuts, rim clamps, and a cotter pin. Because it is designed specifically for demountable 7K UTG style axles, this kit is intended for trailer applications using that axle configuration and studded hub pattern rather than as a universal fit across all trailer axle types.\u003c\/p\u003e\u003cp\u003eThis kit is suited for trailer owners and service shops performing a full hub-and-drum rebuild, replacing a worn or damaged wheel-drum assembly, or restoring a demountable axle end to factory-correct spec in a single package.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-174-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailer Hub and Drum Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Type:\u003c\/strong\u003e Demountable 7K UTG axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Style:\u003c\/strong\u003e Studded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Seal Size:\u003c\/strong\u003e 2.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Cone:\u003c\/strong\u003e LM67048\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Nut Thread Size:\u003c\/strong\u003e 9\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Nut Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRim Clamp Quantity:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 33.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 x 8 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983003488\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDemountable 7K UTG trailer axle\u003c\/li\u003e\n\u003cli\u003eStudded hub configuration\u003c\/li\u003e\n\u003cli\u003e2.125 inch grease seal bore\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K08-174-90 hub and drum kit include?\u003c\/strong\u003e The K08-174-90 kit includes a cupped and studded wheel and drum assembly, a bearing cone (LM67048), a 2.125 inch grease seal, a grease cap, 5 hex nuts (9\/16-18 thread), 5 rim clamps, and a cotter pin, giving you the full set of parts to rebuild one hub-and-drum assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle does this kit fit?\u003c\/strong\u003e This kit is built for a demountable 7K UTG trailer axle with a studded hub, and is sized specifically for a 2.125 inch grease seal bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K08-174-90 kit for one wheel end or a full axle?\u003c\/strong\u003e K08-174-90 is packaged as a single wheel-drum kit, meaning it contains the parts to rebuild one hub and drum assembly rather than a complete axle with both wheel ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size grease seal does this kit use?\u003c\/strong\u003e The kit is built around a 2.125 inch grease seal, matched to the demountable 7K UTG axle bore it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size are the hex nuts included in the kit?\u003c\/strong\u003e The 5 hex nuts included with the Dexter K08-174-90 kit are 9\/16-18 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include the bearings needed for installation?\u003c\/strong\u003e Yes, the K08-174-90 kit includes a bearing cone (LM67048) as part of the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rim clamps come with this kit?\u003c\/strong\u003e The K08-174-90 kit includes 5 rim clamps along with the wheel and drum assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the wheel and drum in this kit already studded?\u003c\/strong\u003e Yes, the wheel and drum assembly included in the K08-174-90 kit is cupped and studded, matching a studded hub configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shipping weight of the Dexter K08-174-90 kit?\u003c\/strong\u003e The complete K08-174-90 hub and drum kit weighs 33.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a grease cap included with the K08-174-90 kit?\u003c\/strong\u003e Yes, a grease cap is included in the kit to protect the packed wheel bearing cavity after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is the K08-174-90 hub and drum kit?\u003c\/strong\u003e K08-174-90 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include a cotter pin?\u003c\/strong\u003e Yes, a cotter pin is included with the Dexter K08-174-90 kit as part of the mounting hardware.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259066587,"sku":"DEX-K08-174-90","price":321.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K08-174-90-7000lbs-Spoke-12-inch-Hub-and-Drum-Assembly__48830.1747363795.500.750.jpg?v=1785188692"},{"product_id":"dexter-k08-219-2g-pre-greased-hub-and-drum-kit-for-7-000-lb-axle-8-on-6-50-bolt-circle-1-2-20-studs","title":"Dexter Hub-Drum Kit K08-219-2G, Pre-Greased, for Boat Trailer Axles","description":"\u003cp\u003eThe Dexter K08-219-2G is a pre-greased hub-drum kit built for boat trailer axle applications. Combining the wheel hub and integrated brake drum into a single assembly, this kit is designed to simplify service on trailer axles that use a hub-and-drum brake setup, which is why it is classified under boat trailer brakes. Because it ships pre-greased, the kit is ready to install without the extra step of packing bearings by hand before mounting, saving time during a hub or brake service job.\u003c\/p\u003e\u003cp\u003eAs a Dexter product, the K08-219-2G is built to the fit, finish, and quality standard expected of genuine Dexter axle components, making it a straightforward replacement option when a trailer's existing hub-drum assembly needs to be serviced or replaced. Always confirm exact axle capacity, bolt circle, stud pattern, and seal size against your trailer's current hub-drum assembly before ordering, since these details can vary by axle configuration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-219-2G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hub-Drum Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Pre-Greased\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Boat Trailer Axle \/ Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 44.94 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007363\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K08-219-2G?\u003c\/strong\u003e It is a Dexter hub-drum kit, part number K08-219-2G, which combines the wheel hub and brake drum into one assembly for boat trailer axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-219-2G come pre-greased?\u003c\/strong\u003e Yes, the Dexter K08-219-2G ships pre-greased, so the bearings do not need to be packed by hand before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hub-drum kit weigh?\u003c\/strong\u003e The Dexter K08-219-2G weighs 44.94 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer is the K08-219-2G designed for?\u003c\/strong\u003e The K08-219-2G is designed for boat trailer axles that use a hub-and-drum brake configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K08-219-2G a genuine Dexter part?\u003c\/strong\u003e Yes, part number K08-219-2G is a genuine Dexter hub-drum kit, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a hub-drum kit listed under trailer brakes?\u003c\/strong\u003e The K08-219-2G integrates the brake drum with the wheel hub, so it is classified as part of the boat trailer brake system rather than a standalone hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the K08-219-2G kit?\u003c\/strong\u003e The UPC for the Dexter K08-219-2G hub-drum kit is 876983007363.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to grease the bearings before installing this kit?\u003c\/strong\u003e No, the Dexter K08-219-2G is supplied pre-greased and ready to install without additional bearing packing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if the K08-219-2G fits my trailer axle?\u003c\/strong\u003e Confirm your trailer's current hub-drum assembly specifications, such as bolt circle and stud pattern, match the K08-219-2G before ordering, since Dexter offers this kit for specific axle configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number K08-219-2G the correct number to reference when ordering?\u003c\/strong\u003e Yes, K08-219-2G is the Dexter manufacturer part number to reference when ordering this pre-greased hub-drum kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259099355,"sku":"DEX-K08-219-2G","price":422.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Pre-Greased-2-and-a-quarter-inch-7000lbs-Hub--Drum-Kit-K08-219-2G__75254.1747363798.500.750.jpg?v=1785329085"},{"product_id":"dexter-k08-201-2g-pre-greased-hub-drum-kit-for-5-2k-6k-trailer-axles-6-on-5-5-bolt-circle-12-x-2-drum-008-201-09","title":"Dexter Hub-Drum Kit K08-201-2G, 12 x 2 Inch Drum, 6 on 5.50 Inch Bolt Circle, 5.2K-6K Axle, Pre-Greased","description":"\u003cp\u003eThe Dexter K08-201-2G is a pre-greased hub-drum kit built for 5.2K-6K trailer axles, sized for a 12 inch x 2 inch drum on a 6 on 5.50 inch wheel bolt circle with 1\/2 inch studs. It is designed to fit Dexter or Lippert 5.2K-6K axles, making it a straightforward replacement option for trailer owners who need to swap out a worn or damaged hub-drum assembly without sourcing each component separately.\u003c\/p\u003e\u003cp\u003eThe kit arrives ready to install: the bearings are pre-greased and the 2.25 inch grease seal is already installed in the hub, so there is no need to hand-pack bearings before mounting. It includes the inner bearing (25580) and outer bearing (15123), an E-Z Lube grease cap, plus the lug nuts and spindle hardware needed to complete the job. This bundling reduces the number of separate part numbers a buyer has to track down and speeds up the repair.\u003c\/p\u003e\u003cp\u003eBecause the kit is matched to the 5.2K-6K axle class with a 6 on 5.50 inch bolt pattern and 1\/2 inch studs, it is intended for trailers built to that same axle and hub specification. Always confirm your axle's bolt circle, stud size, and drum dimensions match this kit before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-201-2G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 35.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12 x 12 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Circle:\u003c\/strong\u003e 6 on 5.50 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Stud Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Seal:\u003c\/strong\u003e 2.25 inches, pre-installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 5.2K-6K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Bearing:\u003c\/strong\u003e 25580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bearing:\u003c\/strong\u003e 15123\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Cap Type:\u003c\/strong\u003e E-Z Lube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Lug nuts and spindle hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Condition:\u003c\/strong\u003e Pre-greased, ready to install\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007141\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDexter or Lippert 5.2K-6K trailer axles\u003c\/li\u003e\n\u003cli\u003e6 on 5.50 inch wheel bolt circle with 1\/2 inch studs\u003c\/li\u003e\n\u003cli\u003e12 inch x 2 inch drum, 2.25 inch grease seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axles does the Dexter K08-201-2G hub-drum kit fit?\u003c\/strong\u003e The K08-201-2G is built for Dexter or Lippert 5.2K-6K trailer axles with a 6 on 5.50 inch wheel bolt circle and 1\/2 inch studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the brake drum in this kit?\u003c\/strong\u003e The drum included in the K08-201-2G kit measures 12 inches by 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the bearings come pre-greased?\u003c\/strong\u003e Yes, the inner bearing (25580) and outer bearing (15123) in the K08-201-2G kit are pre-greased and ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the grease seal already installed?\u003c\/strong\u003e The 2.25 inch grease seal is pre-installed in the hub of the K08-201-2G kit, so it does not need to be pressed in separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bolt pattern on this hub-drum kit?\u003c\/strong\u003e The K08-201-2G uses a 6 on 5.50 inch bolt circle with 1\/2 inch wheel studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included with the K08-201-2G kit?\u003c\/strong\u003e This kit includes the hub and drum, pre-greased inner and outer bearings, a pre-installed grease seal, an E-Z Lube grease cap, lug nuts, and spindle hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of grease cap does this kit use?\u003c\/strong\u003e The K08-201-2G kit comes with an E-Z Lube grease cap, which allows the bearings to be re-greased without disassembling the hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K08-201-2G kit weigh?\u003c\/strong\u003e The Dexter K08-201-2G hub-drum kit weighs 35.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on a 5,200 lb axle?\u003c\/strong\u003e Yes, the K08-201-2G is designed for the 5.2K-6K axle capacity range, which includes 5,200 lb rated axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include the lug nuts needed for installation?\u003c\/strong\u003e Yes, lug nuts are included with the K08-201-2G hub-drum kit along with the spindle hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the product dimensions of the packaged kit?\u003c\/strong\u003e The Dexter K08-201-2G kit measures 12 x 12 x 5 inches as packaged.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259132123,"sku":"DEX-K08-201-2G","price":337.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Pre-Greased-2-and-a-quarter-inch-6000-Hub--Drum-Kit-K08-201-2G__73715.1747363798.500.750.jpg?v=1785188489"},{"product_id":"dexter-k08-247-90-hub-and-drum-kit-3-500-lb-axle-5-on-4-50-bolt-pattern-10-drum","title":"Dexter Axle Hub and Drum Kit K08-247-90 for 3.5K Axle, 5 on 4.50 Bolt Circle, 1.718 Inch Seal","description":"\u003cp\u003eThe Dexter Axle Hub and Drum Kit K08-247-90 is a complete hub-drum assembly built for a 3.5K trailer axle. It is engineered for the 5 on 4.50 inch bolt circle with 1\/2 inch-20 studded hubs, uses a 1.718 inch seal, and comes with a standard grease cap. This kit is designed as a full replacement unit, giving trailer owners and repair shops a single, correctly matched hub and drum assembly rather than sourcing hub and drum components separately and risking a mismatch in bolt pattern, stud size, or seal diameter.\u003c\/p\u003e\u003cp\u003eBecause trailer axle hub-drum assemblies must match the axle's stud pattern and seal bore precisely, the K08-247-90 kit is specified to the 5-4.50 bolt circle and 1.718 inch seal combination used on 3.5K rated axles. Installing a correctly matched kit helps maintain proper wheel bearing seating, brake drum concentricity, and seal integrity, which are all critical to safe towing. The kit includes a rubber plug as part of its assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-247-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Rating:\u003c\/strong\u003e 3.5K axle (3,500 lb.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Circle:\u003c\/strong\u003e 5 on 4.50 inch, studded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/2 inch-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Size:\u003c\/strong\u003e 1.718 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Cap:\u003c\/strong\u003e Standard grease cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Rubber plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10 x 10 x 5 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e3.5K trailer axles with a 5 on 4.50 inch bolt circle, 1\/2 inch-20 studs, and a 1.718 inch seal\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle does the Dexter Axle K08-247-90 hub and drum kit fit?\u003c\/strong\u003e The K08-247-90 kit is built for a 3.5K trailer axle with a 5 on 4.50 inch bolt circle, 1\/2 inch-20 studs, and a 1.718 inch seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts and what pattern does this hub have?\u003c\/strong\u003e It uses a 5 on 4.50 inch bolt circle with 1\/2 inch-20 studded lugs, matching common 3.5K trailer axle hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size seal does K08-247-90 use?\u003c\/strong\u003e This kit is specified with a 1.718 inch seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with a grease cap?\u003c\/strong\u003e Yes, the Dexter Axle K08-247-90 kit includes a standard grease cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K08-247-90 hub and drum kit weigh?\u003c\/strong\u003e The kit weighs 24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hub and drum kit?\u003c\/strong\u003e Product dimensions for the K08-247-90 kit are 10 x 10 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a rubber plug included with this kit?\u003c\/strong\u003e Yes, a rubber plug is included as part of the Dexter Axle K08-247-90 assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete hub and drum assembly or do I need separate parts?\u003c\/strong\u003e K08-247-90 is sold as a complete hub-drum kit for a 3.5K axle, so the hub and drum come matched together rather than as separate components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hub kit fit a 5,200 lb or 6,000 lb axle?\u003c\/strong\u003e No, the K08-247-90 kit is specified for a 3.5K (3,500 lb.) axle with a 5 on 4.50 inch bolt circle; a heavier-rated axle uses a different hub and drum kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number K08-247-90?\u003c\/strong\u003e K08-247-90 is a Dexter Axle part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259427035,"sku":"DEX-K08-247-90","price":202.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K08-247-90-3500lbs-5-4-point-50BC-10-inch-Hub-and--Drum-Assembly__57376.1747363794.500.750.jpg?v=1785188106"},{"product_id":"dexter-k08-219-1g-hub-drum-kit-for-7-000-lb-trailer-axle-8-6-50-bolt-circle-1-2-studs-12-x-2-drum-pre-greased","title":"Dexter Hub-Drum Kit K08-219-1G, 7,000 lb Axle, 8 on 6.50 Bolt Circle, 1\/2 inch Studs, Pre-Greased","description":"\u003cp\u003eThe Dexter K08-219-1G is a complete pre-greased hub-drum kit built for 7,000 lb trailer axles with an 8 on 6.50 inch bolt circle. It is studded for 1\/2 inch-20 wheel studs and is assembled and packed with Dexter grease, so it is ready to install straight from the box on trailers equipped with electric or hydraulic brakes. The kit is engineered around a 2.125 inch seal and uses a standard grease cap, matching the seal and cap sizing that Dexter specifies for this axle and bolt circle combination.\u003c\/p\u003e\u003cp\u003eInside the kit, the hub and drum are matched with a bearing cone (25580), cone nuts, a seal, and a grease cap, with an instruction sheet included to guide installation. Because everything is pre-assembled and pre-greased at the factory, installers do not need to hand-pack bearings or separately source a matching seal and cap, which reduces the chance of a mismatched part causing a bearing failure or grease leak down the road.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-219-1G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Circle:\u003c\/strong\u003e 8 on 6.50 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Stud Size:\u003c\/strong\u003e 1\/2 inch-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Size:\u003c\/strong\u003e 2.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Cap:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Cone:\u003c\/strong\u003e 25580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 39.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007158\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Bearings, Caps, Hub-drum, Lug nuts, Seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e K08-219-2G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7,000 lb axles\u003c\/li\u003e\n\u003cli\u003e8 on 6.50 inch bolt circle\u003c\/li\u003e\n\u003cli\u003eStudded for 1\/2 inch-20 wheel studs\u003c\/li\u003e\n\u003cli\u003e2.125 inch seal\u003c\/li\u003e\n\u003cli\u003eStandard grease cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eK08-219-2G\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle does the Dexter K08-219-1G hub-drum kit fit?\u003c\/strong\u003e The K08-219-1G is built for 7,000 lb trailer axles with an 8 on 6.50 inch bolt circle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel stud size does this kit use?\u003c\/strong\u003e Dexter K08-219-1G is studded for 1\/2 inch-20 wheel studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-219-1G come pre-greased?\u003c\/strong\u003e Yes, the hub and drum assembly is packed with Dexter grease at the factory, so it is ready to install without separately hand-packing the bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat seal size is used in this hub-drum kit?\u003c\/strong\u003e The K08-219-1G uses a 2.125 inch seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a grease cap included with the K08-219-1G?\u003c\/strong\u003e Yes, a standard grease cap is included as part of the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing does the K08-219-1G include?\u003c\/strong\u003e The kit includes a bearing cone (25580) as one of its components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K08-219-1G hub-drum kit weigh?\u003c\/strong\u003e The K08-219-1G weighs 39.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-219-1G work with electric or hydraulic brakes?\u003c\/strong\u003e Yes, this hub-drum kit fits 7,000 lb axles equipped with either electric or hydraulic brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K08-219-1G kit?\u003c\/strong\u003e The K08-219-1G kit includes bearings, a hub-drum, seal, cone nuts, grease cap, and an instruction sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a comparable Dexter part number to the K08-219-1G?\u003c\/strong\u003e K08-219-2G is listed as the OEM equivalent part number to the K08-219-1G.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub-drum made from on the K08-219-1G?\u003c\/strong\u003e The Dexter K08-219-1G hub-drum kit is made of steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-219-1G include installation instructions?\u003c\/strong\u003e Yes, an instruction sheet is included with the K08-219-1G kit to guide installation.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259459803,"sku":"DEX-K08-219-1G","price":380.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Pre-Greased-2-point-24-inch-7000lbs-Hub--Drum-Kit-K08-219-1G__77302.1747363798.500.750.jpg?v=1785188142"},{"product_id":"dexter-k08-435-05-hub-and-rotor-kit-3-7k-5-on-4-5-zinc-cupped-and-studded-trailer-disc-brake-hub-rotor","title":"Dexter Axle Hub and Rotor Kit, 3.7K 545, Cupped and Studded, Zinc Finish","description":"\u003cp\u003eThis Dexter Axle hub and rotor kit is a single boxed hub\/rotor assembly built for 3.7K capacity trailer axles using the 545 hub configuration. The unit is cupped and studded, meaning the bearing cups and wheel studs are pre-installed at the factory, simplifying installation onto a matching 3.7K 545 trailer axle spindle. The hub and rotor are finished in zinc for corrosion resistance during service on boat trailers, utility trailers, and other towed equipment exposed to road spray and moisture.\u003c\/p\u003e\u003cp\u003eEach kit ships as one complete hub and rotor unit, ready to be paired with the correct bearings, seal, and caliper hardware for the axle it is installed on. The zinc-plated finish helps protect the rotor and hub surfaces from rust while in storage or use, and the pre-studded design reduces on-axle assembly time compared to installing studs individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-435-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hub and Rotor Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Configuration:\u003c\/strong\u003e 3.7K 545\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Cupped and Studded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Single boxed hub and rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.75 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter Axle K08-435-05 hub and rotor kit?\u003c\/strong\u003e The K08-435-05 kit ships as a single boxed hub and rotor assembly, cupped and studded so the bearing cups and wheel studs are already installed on the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 3.7K 545 mean on this hub and rotor?\u003c\/strong\u003e 3.7K 545 identifies the hub and rotor's capacity and configuration class, and it is the designation used for the Dexter Axle K08-435-05 hub and rotor kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does cupped and studded mean?\u003c\/strong\u003e Cupped and studded means the bearing cups (races) and wheel studs are pre-installed on the K08-435-05 hub and rotor at the factory, rather than needing to be pressed in or driven separately during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this hub and rotor have?\u003c\/strong\u003e The Dexter Axle K08-435-05 hub and rotor is finished in zinc, which provides corrosion resistance for trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K08-435-05 hub and rotor kit weigh?\u003c\/strong\u003e This kit weighs 15.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub and rotor sold as a single unit or a pair?\u003c\/strong\u003e The K08-435-05 is sold as a single boxed hub and rotor, so buyers needing both sides of an axle should order two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub and rotor made by Dexter Axle?\u003c\/strong\u003e Yes, this hub and rotor is manufactured by Dexter Axle under part number K08-435-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the wheel studs already installed on this hub?\u003c\/strong\u003e Yes, because the K08-435-05 is a studded hub and rotor, the wheel studs are pre-installed and do not need to be pressed in separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailers is the 3.7K 545 hub and rotor used on?\u003c\/strong\u003e The 3.7K 545 designation on the Dexter Axle K08-435-05 hub and rotor corresponds to trailer axles built to that same capacity and configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub and rotor include bearings or a seal?\u003c\/strong\u003e The K08-435-05 kit is the hub and rotor assembly itself with cups and studs installed; it does not include the bearings or seal as part of this listing.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259492571,"sku":"DEX-K08-435-05","price":114.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-3500-3700lbs-Zinc-10-inch-Hub--Rotor-Assembly-K08-435-05__38096.1747363797.500.750.jpg?v=1785188564"},{"product_id":"dexter-k08-248-1g-3-500-lb-trailer-hub-assembly-kit-5-on-4-1-2-bolt-pattern-pre-greased-for-e-z-lube-84-spindle-idler-axles","title":"Dexter Trailer Hub Assembly Kit K08-248-1G, 5 on 4-1\/2 Inch, 3500 lb E-Z Lube Idler Axle","description":"\u003cp\u003eThe Dexter K08-248-1G is a pre-greased trailer hub assembly kit built for 3,500-lb E-Z Lube idler axles fitted with #84 spindles, giving a rated capacity of 1,750 lbs per hub. It arrives ready to install: the bearings are packed at the factory, so there is no need to hand-pack grease before mounting. The kit uses a 5 on 4-1\/2 inch bolt pattern, matching wheels in the 13 to 15 inch range commonly used on light-duty utility, boat, and cargo trailers.\u003c\/p\u003e\u003cp\u003eInside the box you get the inner bearing (L68149), outer bearing (L44649), races, a grease seal, wheel bolts, and lug nuts, along with both an E-Z Lube grease cap and a standard grease cap so you can service the hub either way going forward. The hub body is iron construction for durability under repeated towing and launching cycles. This kit is intended as a complete hub replacement for idler (non-braked) axle positions on trailers matching the E-Z Lube, #84-spindle, 5 on 4-1\/2 inch specification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-248-1G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailer Hub Assembly Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3,500 lbs (1,750 lbs per hub)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle:\u003c\/strong\u003e #84 spindle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5 on 4-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Compatibility:\u003c\/strong\u003e 13 to 15 inch wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Bearing:\u003c\/strong\u003e L68149\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bearing:\u003c\/strong\u003e L44649\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease System:\u003c\/strong\u003e Pre-greased, E-Z Lube compatible; includes E-Z Lube and standard grease caps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7.5 x 7.5 x 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007066\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3,500-lb E-Z Lube idler axles with #84 spindles\u003c\/li\u003e\n\u003cli\u003e5 on 4-1\/2 inch bolt pattern wheels, 13 to 15 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle setup does the Dexter K08-248-1G hub kit fit?\u003c\/strong\u003e The K08-248-1G is designed for 3,500-lb E-Z Lube idler axles fitted with #84 spindles, with a rated capacity of 1,750 lbs per hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-248-1G come pre-greased?\u003c\/strong\u003e Yes, the K08-248-1G hub kit is pre-greased at the factory, so it is ready to install without needing to hand-pack the bearings first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does this Dexter hub use?\u003c\/strong\u003e It uses a 5 on 4-1\/2 inch bolt pattern, compatible with 13 to 15 inch wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearings are included in the K08-248-1G kit?\u003c\/strong\u003e The kit includes an inner bearing (L68149) and an outer bearing (L44649), along with matching races and a grease seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Dexter K08-248-1G?\u003c\/strong\u003e The K08-248-1G kit includes the hub, inner bearing L68149, outer bearing L44649, races, a grease seal, wheel bolts, lug nuts, and both an E-Z Lube grease cap and a standard grease cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K08-248-1G hub kit weigh?\u003c\/strong\u003e The K08-248-1G weighs 9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Dexter K08-248-1G hub made of?\u003c\/strong\u003e The hub body is iron construction, built for durability under repeated towing use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K08-248-1G be used on a braked axle position?\u003c\/strong\u003e The K08-248-1G is an idler axle hub kit, meaning it is intended for non-braked hub positions rather than braked axle positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grease caps come with this hub kit?\u003c\/strong\u003e The K08-248-1G includes both an E-Z Lube grease cap and a standard grease cap, so it can be serviced either way after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the K08-248-1G kit?\u003c\/strong\u003e The K08-248-1G ships in a package measuring 7.5 x 7.5 x 5.5 inches.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259525339,"sku":"DEX-K08-248-1G","price":150.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Pre-Greased-5-on-4-and-a-half-inch-1-point-718-inch-3500lbs-Hub-Kit-K08-248-1G__08717.1747363804.500.750.jpg?v=1785188510"},{"product_id":"dexter-k08-247-1g-pre-greased-hub-drum-kit-3-5k-axle-5-on-4-50-bolt-pattern-1-2-20-studs-10-x-2-1-4-drum","title":"Dexter Hub-Drum Kit K08-247-1G, 3.5K Axle, 5-4.50 Bolt Circle, 1\/2 Inch Studs, Pre-Greased","description":"\u003cp\u003eThe Dexter K08-247-1G is a pre-greased hub-drum kit built for 3.5K trailer axles with a 5-4.50 inch bolt circle and 1\/2 inch-20 studs. It arrives fully assembled with bearings and seal already installed and packed with Dexter grease, so it mounts to the spindle ready to run without a separate bearing pack-and-seal step. The kit uses a 1.718 inch seal and pairs with a 10 x 2-1\/4 inch drum, and it includes a standard grease cap.\u003c\/p\u003e\u003cp\u003eEverything needed for a complete hub-drum swap is included in the box: the hub-drum assembly, seal, inner and outer bearings, spindle attachment hardware, lug nuts, and grease cap. An instruction sheet is included to walk through installation on the trailer spindle. This makes the K08-247-1G suited to routine hub replacement, brake service that requires drum removal, or upgrading a worn or damaged hub-drum on a boat trailer axle rated for 3.5K.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-247-1G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailer Hub-Drum Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3.5K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5-4.50 inch bolt circle, studded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/2 inch-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Size:\u003c\/strong\u003e 1.718 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Size:\u003c\/strong\u003e 10 x 2-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Cap Type:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 10 x 10 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 008-247-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Hub-drum, seal, bearings, spindle attachment hardware, lug nuts, and grease cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e3.5K trailer axles with a 5-4.50 inch bolt circle, studded, 1\/2 inch-20 studs, and 1.718 inch seal\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e008-247-07\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle does the Dexter K08-247-1G hub-drum kit fit?\u003c\/strong\u003e The K08-247-1G is built for 3.5K trailer axles with a 5-4.50 inch bolt circle, studded 1\/2 inch-20 studs, and a 1.718 inch seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearings already installed and greased?\u003c\/strong\u003e Yes, the K08-247-1G ships pre-greased with the inner and outer bearings and seal already installed, so it is ready to mount to the spindle out of the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the brake drum on this kit?\u003c\/strong\u003e The drum on the Dexter K08-247-1G measures 10 x 2-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does this hub use?\u003c\/strong\u003e It uses a 5-4.50 inch bolt circle with studded 1\/2 inch-20 studs, matching the K08-247-1G hub-drum kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the K08-247-1G?\u003c\/strong\u003e The kit includes the hub-drum assembly, seal, bearings, spindle attachment hardware, lug nuts, and a grease cap, along with an installation instruction sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-247-1G include a grease cap?\u003c\/strong\u003e Yes, a standard grease cap is included with the Dexter K08-247-1G hub-drum kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat seal size does this hub-drum kit use?\u003c\/strong\u003e The K08-247-1G uses a 1.718 inch seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K08-247-1G hub-drum kit weigh?\u003c\/strong\u003e The K08-247-1G weighs 22.37 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM cross-reference number for this hub-drum kit?\u003c\/strong\u003e Yes, the Dexter K08-247-1G cross-references to OEM part number 008-247-07.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does this hub use?\u003c\/strong\u003e The hub is studded with 1\/2 inch-20 studs, part of the 5-4.50 inch bolt circle pattern on the K08-247-1G.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub-drum kit assembled or does it require building up the bearings?\u003c\/strong\u003e The K08-247-1G is fully assembled and pre-greased, so there is no need to pack bearings or set a seal separately before installation.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259558107,"sku":"DEX-K08-247-1G","price":245.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Pre-Greased-1-point-1718-inch-3500lbs-Hub--Drum-Kit-K08-247-1G__86742.1747363798.500.750.jpg?v=1785188903"},{"product_id":"dexter-k08-436-05-idler-hub-kit-3-7k-545-bolt-pattern-cupped-studded-zinc-finish","title":"Dexter K08-436-05 Idler Trailer Hub, 3.7000 Inch, 545 Bolt Pattern, Cupped and Studded, Zinc Plated","description":"\u003cp\u003eThe Dexter K08-436-05 is a boxed idler hub built for boat trailer axles that do not carry brakes. It comes cupped and studded and finished in zinc for corrosion resistance, making it suited to the wet, salt-exposed conditions boat trailers regularly see. The hub uses a 3.7000 inch hub diameter and a 545 bolt pattern, and ships as a single unit (package quantity of 1).\u003c\/p\u003e\u003cp\u003eBecause it is an idler hub, it mounts on the non-braked side of a tandem or multi-axle trailer where a braked hub assembly is not required. The cupped-and-studded design means the wheel studs are pre-installed and the bearing cups are already seated in the hub, simplifying installation compared to a bare hub that requires separate cup pressing and stud installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-436-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Idler Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Diameter:\u003c\/strong\u003e 3.7000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 545\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Cupped and studded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8.12 x 8.12 x 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983006021\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K08-436-05?\u003c\/strong\u003e The K08-436-05 is a boxed idler trailer hub from Dexter, meaning it is built for the non-braked side of a trailer axle rather than a braked position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub diameter does the K08-436-05 use?\u003c\/strong\u003e This hub has a 3.7000 inch hub diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern is the K08-436-05 built for?\u003c\/strong\u003e It uses a 545 bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-436-05 come with studs already installed?\u003c\/strong\u003e Yes, the K08-436-05 is a cupped and studded hub, meaning the wheel studs are pre-installed and the bearing cups are already seated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this hub have?\u003c\/strong\u003e Zinc plating is applied to the K08-436-05 for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K08-436-05 weigh?\u003c\/strong\u003e It weighs 6.23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the K08-436-05?\u003c\/strong\u003e The item measures 8.12 x 8.12 x 4.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hubs come in one package?\u003c\/strong\u003e One K08-436-05 hub ships per package (package quantity of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K08-436-05 be used on a braked axle position?\u003c\/strong\u003e No, it is an idler hub, designed for the axle position that does not have brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K08-436-05 a genuine Dexter part?\u003c\/strong\u003e Yes, the K08-436-05 is a genuine Dexter idler hub, identified by the Dexter part number K08-436-05.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259590875,"sku":"DEX-K08-436-05","price":76.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-5-Lug-4-and-a-half-inch-Bolt-3700lbs-Zinc-Idler-Hub-K08-436-05__33146.1747363799.500.750.jpg?v=1785188991"},{"product_id":"6k-hub-rotor-kit-cupped-studded-zinc-plated-db-35-mpn-k08-440-05","title":"Dexter Hub and Rotor Kit K08-440-05, 6000 lb Capacity, 6 on 5.5 Inch, Cupped and Studded, Zinc","description":"\u003cp\u003eThis Dexter Hub and Rotor Kit, part number K08-440-05, is a complete 6,000 lb capacity hub and rotor assembly built for trailer axles using a 6 on 5.5 inch bolt pattern. The kit is supplied cupped, meaning the bearing cups are pre-installed in the hub, and studded, meaning the wheel studs are already pressed into place, so it is ready to accept bearings, seal, and wheel without additional pressing work at installation. The rotor and hub carry a zinc finish for corrosion resistance in the wet, salt-exposed environment typical of trailer and marine trailer service.\u003c\/p\u003e\u003cp\u003eThis assembly is intended as a direct hub and rotor replacement or upgrade for disc brake trailer axles rated to the matching 6,000 lb capacity and 6 on 5.5 inch bolt circle. It is sold as the hub and rotor unit itself; bearings, races, seals, and hardware not listed in the specifications below are not included.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-440-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 6,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 6 on 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Cups:\u003c\/strong\u003e Pre-installed (cupped)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Studs:\u003c\/strong\u003e Pre-installed (studded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24.86 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat capacity is the Dexter K08-440-05 hub and rotor kit rated for?\u003c\/strong\u003e The Dexter K08-440-05 hub and rotor kit is rated for 6,000 pounds capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does this hub and rotor kit use?\u003c\/strong\u003e It uses a 6 on 5.5 inch bolt pattern, matching common 6,000 lb trailer axle hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-440-05 kit come with the bearing cups already installed?\u003c\/strong\u003e Yes, this kit is cupped, meaning the bearing cups are pre-installed in the hub so they do not need to be pressed in separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the wheel studs already installed on this hub and rotor kit?\u003c\/strong\u003e Yes, the Dexter K08-440-05 is studded, meaning the wheel studs are pre-installed in the hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Dexter K08-440-05 hub and rotor kit have?\u003c\/strong\u003e It has a zinc finish, which provides corrosion resistance for trailer use in wet or salt-exposed conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K08-440-05 hub and rotor kit weigh?\u003c\/strong\u003e The kit weighs 24.86 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre wheel bearings and seals included with this kit?\u003c\/strong\u003e The Dexter K08-440-05 listing covers the hub and rotor assembly itself; bearings, races, seals, and mounting hardware are not part of this kit unless separately listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub and rotor kit made by Dexter?\u003c\/strong\u003e Yes, this is a genuine Dexter part, number K08-440-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a cupped and studded kit versus a plain hub and rotor?\u003c\/strong\u003e A cupped and studded kit like the K08-440-05 arrives with the bearing cups and wheel studs already installed, reducing the assembly work needed compared to a bare hub and rotor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K08-440-05 hub and rotor kit suitable for disc brake trailer axles?\u003c\/strong\u003e Yes, this hub and rotor combination is designed for disc brake trailer axles matching its 6,000 lb capacity and 6 on 5.5 inch bolt pattern.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259623643,"sku":"DEX-K08-440-05","price":260.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/p2__36931.1747363842.500.750.jpg?v=1785329085"},{"product_id":"dexter-k08-259-1g-pre-greased-trailer-hub-assembly-kit-5-on-4-5-bolt-pattern-for-2k-idler-axles-l44649-bearings-8-12-in-wheels","title":"Dexter Trailer Hub Kit K08-259-1G, 5 on 4.5 Bolt Pattern, 2K Axle, Fits 8-12 Inch Wheels","description":"\u003cp\u003eThe Dexter K08-259-1G is a complete, pre-greased trailer hub kit built for 2K axles with a 5 on 4.5 inch bolt pattern. It arrives ready to install straight out of the box, saving the time and mess of packing bearings and fitting a seal by hand. The kit is sized for 8 inch to 12 inch wheels only and uses studded 1\/2\"-20 studs to match a 2K axle setup.\u003c\/p\u003e\u003cp\u003eInside the kit you get the L44649 inner and outer bearings along with their races, a grease seal, and a standard grease cap, plus wheel bolts and lug nuts so the hub is ready for full wheel assembly. The hub itself is built from iron for long-term durability under trailer loads. This hub kit is designed to work with E-Z Lube idler axles fitted with BTR spindles, making it a straightforward match for light-duty idler axle trailers using that bolt pattern and stud size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-259-1G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 2K axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5 on 4.50 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/2\"-20, studded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Compatibility:\u003c\/strong\u003e 8 inch to 12 inch wheels only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Cap:\u003c\/strong\u003e Standard grease cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e L44649 inner and outer bearings with races\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e Grease seal included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Wheel bolts and lug nuts included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3.5 x 8.25 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007059\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2K axles with a 5 on 4.50 inch bolt pattern\u003c\/li\u003e\n\u003cli\u003eStudded 1\/2\"-20 hubs\u003c\/li\u003e\n\u003cli\u003e8 inch to 12 inch wheels only\u003c\/li\u003e\n\u003cli\u003eE-Z Lube idler axles with BTR spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K08-259-1G hub kit?\u003c\/strong\u003e The K08-259-1G kit includes L44649 inner and outer bearings with races, a grease seal, a standard grease cap, and wheel bolts and lug nuts, all pre-greased and ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does this hub kit use?\u003c\/strong\u003e K08-259-1G uses a 5 on 4.50 inch bolt pattern with studded 1\/2\"-20 studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes fit this hub?\u003c\/strong\u003e This hub kit fits 8 inch to 12 inch wheels only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the K08-259-1G designed for?\u003c\/strong\u003e It is built for a 2K axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-259-1G come pre-greased?\u003c\/strong\u003e Yes, the hub kit is pre-greased and ready to install out of the box, with no need to hand-pack the bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearings come with this kit?\u003c\/strong\u003e L44649 inner and outer bearings, along with their matching races, are included in the K08-259-1G kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of grease cap is included?\u003c\/strong\u003e A standard grease cap is included with the K08-259-1G hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K08-259-1G hub compatible with E-Z Lube idler axles?\u003c\/strong\u003e Yes, this hub kit is designed to work with E-Z Lube idler axles fitted with BTR spindles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub made of?\u003c\/strong\u003e The K08-259-1G hub is built from iron for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K08-259-1G hub kit weigh?\u003c\/strong\u003e 7.34 pounds is the weight of the Dexter K08-259-1G hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hub kit?\u003c\/strong\u003e 3.5 x 8.25 x 3 inches are the product dimensions of the K08-259-1G hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include the wheel bolts and lug nuts needed for installation?\u003c\/strong\u003e Yes, wheel bolts and lug nuts are included with the K08-259-1G so the hub can be fully assembled to the wheel.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259656411,"sku":"DEX-K08-259-1G","price":121.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Pre-Greased-5-on-4-and-a-half-inch-2200lbs-Hub-Kit-K08-259-1G__33159.1747363798.500.750.jpg?v=1785188358"},{"product_id":"dexter-k08-517-91-10-e-coated-brake-drum-hub-kit-with-bearings-cups-studs-and-seal-for-trailer-drum-brakes","title":"Dexter 10 Inch Trailer Brake Drum Hub K08-517-91 with Bearings, Seal and Studs","description":"\u003cp\u003eThe Dexter 10 Inch Brake Drum Hub (K08-517-91) is a complete trailer wheel hub assembly built to work with either hydraulic or electric drum brake systems, making it a common replacement part for boat trailer axles. The hub is E-Coated for greater corrosion resistance, an important feature for trailer components that are regularly submerged or exposed to salt water and road spray during launching and retrieval. This is a drum hub unit that comes with wheel bearings, a seal, bearing cups, and wheel studs already fitted, so it is ready to be installed onto the axle spindle without having to source and press in those components separately.\u003c\/p\u003e\u003cp\u003eThis hub is intended for trailer owners and technicians replacing a worn, rusted, or damaged brake drum hub, and it supports the drum brake hardware (shoes, hydraulic or electric actuating components) that mounts around it. Because it ships with the bearing and seal set already installed, it simplifies a hub replacement into essentially a bolt-on job once the old hub, bearings, and races have been removed from the spindle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-517-91\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 10 Inch Brake Drum Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Brake Systems:\u003c\/strong\u003e Hydraulic or electric drum brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Wheel bearings, seal, bearing cups, and wheel studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e E-Coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 8.8 x 10.8 x 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983009626\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K08-517-91?\u003c\/strong\u003e It is a 10 inch trailer brake drum hub from Dexter that comes complete with wheel bearings, a seal, bearing cups, and wheel studs already installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub work with electric or hydraulic brakes?\u003c\/strong\u003e The Dexter 10 inch brake drum hub K08-517-91 is designed to work with either hydraulic or electric drum brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearings and seal included, or do I need to buy them separately?\u003c\/strong\u003e Bearings, a seal, and bearing cups are included on the K08-517-91 hub, so it arrives ready to install without needing to source and press those parts in separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub come with wheel studs installed?\u003c\/strong\u003e Yes, wheel studs are already fitted to the Dexter K08-517-91 brake drum hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub is this?\u003c\/strong\u003e This is a 10 inch brake drum hub, part number K08-517-91 from Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K08-517-91 hub weigh?\u003c\/strong\u003e The Dexter K08-517-91 brake drum hub weighs 21.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hub?\u003c\/strong\u003e The Dexter K08-517-91 measures 8.8 x 10.8 x 10.5 inches (length x width x height).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub coated to resist rust?\u003c\/strong\u003e Yes, the K08-517-91 is E-Coated, which provides greater corrosion resistance, an important feature for trailer hubs regularly exposed to water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the brake drum surface or just the hub?\u003c\/strong\u003e The K08-517-91 is a drum hub unit supplied with cups and studs; it is the hub and bearing assembly rather than separate brake shoe hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of trailers is this hub used on?\u003c\/strong\u003e The Dexter K08-517-91 is a trailer brake drum hub used on axles equipped with hydraulic or electric drum brake systems, such as boat trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to press bearings into this hub before installing it?\u003c\/strong\u003e No, the K08-517-91 comes with the wheel bearings, cups, and seal already installed, so it can be mounted onto the spindle without additional bearing press-in work.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259689179,"sku":"DEX-K08-517-91","price":170.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/t-d-81001_large__11950.1558175834.500.750.jpg?v=1785188105"},{"product_id":"dexter-k71-028-00-vault-service-kit-6k-axle-2-441-inch-outer-bore-hub-seal-kit","title":"Dexter Vault Service Kit K71-028-00 - 6K Axle Service Kit, 2.441 Inch Outer Bore, 655 Spindle","description":"\u003cp\u003eThe Dexter Vault Service Kit K71-028-00 is a 6K-rated trailer axle service kit sized for a 2.441 inch outer bore, built for the 655 spindle designation. Dexter's Vault Service Kit line is designed to service the bearing and seal area of trailer axles rated in the 6,000 pound (6K) capacity class, matching the bore and spindle dimensions called out in the part name. Selecting the correct outer bore size and spindle designation is critical when servicing a trailer axle, since a mismatched bore or spindle fit will not seat correctly. This kit is cataloged under Dexter's Axles \u0026amp; Springs category and is intended for trailer owners and service shops performing axle bearing maintenance on 6K-class axles fitted with a 2.441 inch outer bearing bore.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-028-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Vault Service Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Class:\u003c\/strong\u003e 6K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore Diameter:\u003c\/strong\u003e 2.441 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle\/Axle Designation:\u003c\/strong\u003e 655\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008179\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Axles \u0026amp; Springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Vault Service Kit K71-028-00 used for?\u003c\/strong\u003e K71-028-00 is a Dexter Vault Service Kit used to service the bearing area of a 6K-class trailer axle with a 2.441 inch outer bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this kit designed for?\u003c\/strong\u003e This kit is designated for the 6K capacity class, Dexter's designation for trailer axles in the 6,000 pound rating class.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does K71-028-00 fit?\u003c\/strong\u003e The kit is sized for a 2.441 inch outer bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle does this Vault Service Kit match?\u003c\/strong\u003e K71-028-00 is designated for the 655 spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-028-00 service kit weigh?\u003c\/strong\u003e It weighs 1.27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K71-028-00 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-028-00 is the Dexter manufacturer part number for this Vault Service Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this part fall under?\u003c\/strong\u003e K71-028-00 is listed under Dexter's Axles \u0026amp; Springs category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if this kit fits my trailer axle?\u003c\/strong\u003e Confirm your axle is in the 6K capacity class and that the bearing outer bore measures 2.441 inches, matching the specification for K71-028-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter Vault Service Kit K71-028-00?\u003c\/strong\u003e The UPC for this kit is 876983008179.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Vault Service Kit the same as a standard bearing kit?\u003c\/strong\u003e The Vault Service Kit is Dexter's named product line for this bearing\/seal area service kit, identified by part number K71-028-00.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262114011,"sku":"DEX-K71-028-00","price":202.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-6000lbs-6-Lug-5.5-inch-Trailer-Axle-vault-Service-Kit-K71-028-00__08250.1747363799.500.750.jpg?v=1785329093"},{"product_id":"ufp-by-dexter-vault-service-kit-k71-030-00-for-2-5k-3-2k-3-5k-545-trailer-axles-1-980-outer-bore","title":"Dexter Vault Service Kit K71-030-00 for 2500, 3200, 3500 lb 545 Series Trailer Axles, 1.980 Inch Bore","description":"\u003cp\u003eThe Dexter Vault Service Kit, part number K71-030-00, is a complete rebuild and maintenance kit for the Dexter Vault bearing protector system used on 2500, 3200, and 3500 lb capacity 545 series trailer axles with a 1.980 inch outer bore. Rather than sourcing individual seals and hardware separately, this kit bundles everything needed to service a pair of hubs in one package: two O-rings, a matched pair of Trailer Buddy assemblies, a vault lube tube, a dedicated vault installation tool, loctite for securing hardware during reassembly, and a grease fitting. The kit is packaged as a single unit (package quantity of 1) and is intended for trailer owners and service shops performing routine bearing protector maintenance or replacing worn Vault components on Dexter-equipped axles. Using the correct outer bore size and axle capacity ensures the Trailer Buddy assemblies and O-rings seat properly, keeping the bearing protector sealed against water and debris intrusion. The included installation tool is sized specifically for the Vault system, helping ensure the assemblies are seated to the correct depth without damaging the O-ring seals. At 2.2 pounds, the kit is compact enough for on-trailer service or storage in a tow vehicle for roadside maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-030-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Dexter Vault\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Axle Capacities:\u003c\/strong\u003e 2500, 3200, and 3500 lb, 545 series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore Diameter:\u003c\/strong\u003e 1.980 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Grease Tube, Installation Tool, Loctite, O-Ring (2), Trailer Buddy Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 3 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008193\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter Vault Service Kit K71-030-00?\u003c\/strong\u003e This kit includes 2 O-rings, a pair of Trailer Buddy assemblies, a vault lube tube, 1 vault installation tool, loctite, and a grease fitting, giving you everything needed to service a set of Dexter Vault bearing protectors in one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacities does K71-030-00 fit?\u003c\/strong\u003e K71-030-00 is designed for 2500, 3200, and 3500 lb capacity 545 series trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does this kit require?\u003c\/strong\u003e The Dexter Vault Service Kit K71-030-00 is sized for a 1.980 inch outer bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter Vault Service Kit weigh?\u003c\/strong\u003e The K71-030-00 kit weighs 2.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many O-rings come in the kit?\u003c\/strong\u003e Two O-rings are included in the K71-030-00 kit, one for each Trailer Buddy assembly being serviced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an installation tool included?\u003c\/strong\u003e Yes, the kit includes 1 dedicated vault installation tool for seating the Trailer Buddy assemblies correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include lubricant for the bearing protectors?\u003c\/strong\u003e A vault lube tube and a grease fitting are included with the K71-030-00 kit for servicing the bearing protector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs loctite included for reassembly?\u003c\/strong\u003e Yes, loctite is included in the Dexter Vault Service Kit K71-030-00 for securing hardware during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the package quantity for this kit?\u003c\/strong\u003e K71-030-00 ships as a single kit with a package quantity of 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the item dimensions of the kit as packaged?\u003c\/strong\u003e The Dexter Vault Service Kit K71-030-00 measures 9 x 3 x 3 inches as an item, with package dimensions of 10 x 7 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K71-030-00 is the genuine Dexter part number for the Vault Service Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a matched pair of Trailer Buddy assemblies?\u003c\/strong\u003e Yes, the K71-030-00 kit includes 2 Trailer Buddy assemblies sized to match the 1.980 inch outer bore of the 545 series axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262343387,"sku":"DEX-K71-030-00","price":223.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/UFP-Vault-Kit-2.5K-3.2K-3.5K__80141.1739477125.500.750.jpg?v=1785188490"},{"product_id":"dexter-k71-033-00-stainless-steel-bearing-protector-kit-with-bras-fits-4-200-lb-5-on-4-5-5-200-lb-6-on-5-5-trailer-hubs-2-328-bore","title":"Dexter Stainless Steel Trailer Hub Protector Kit with Bra K71-033-00, Fits 4,200 lb 5-Lug and 5,200 lb 6-Lug Trailer Hubs","description":"\u003cp\u003eThe Dexter K71-033-00 Stainless Steel Protector Kit with Bra shields your trailer's wheel hub assembly from dirt, moisture, and road debris, helping protect wheel bearings and seals from premature wear during towing, launching, and storage. The kit pairs a stainless steel protector cap with a fitted bra cover for an added layer of defense against grime and splash-back, making it a practical addition for boat trailer owners who want to extend the service life of their hub components.\u003c\/p\u003e\u003cp\u003eBuilt by Dexter, a longtime manufacturer of trailer axle and brake hardware, this protector kit is sized for a 2.328 inch bore and is compatible with 4,200 lb capacity hubs using a 5-lug, 5 on 4.5 inch bolt pattern, as well as 5,200 lb capacity hubs using a 6-lug, 6 on 5.5 inch bolt pattern. The stainless steel construction resists corrosion in wet, salt-exposed trailering environments, and the kit installs over the existing hub for straightforward protection without modifying the brake or bearing assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-033-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailer Hub Protector Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore Diameter:\u003c\/strong\u003e 2.328 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Hub Capacity:\u003c\/strong\u003e 4,200 lb (5-lug, 5 on 4.5 inch) and 5,200 lb (6-lug, 6 on 5.5 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Protector cap and bra cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.99 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008223\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4,200 lb capacity trailer hubs, 5-lug, 5 on 4.5 inch bolt pattern\u003c\/li\u003e\n\u003cli\u003e5,200 lb capacity trailer hubs, 6-lug, 6 on 5.5 inch bolt pattern\u003c\/li\u003e\n\u003cli\u003e2.328 inch bore hubs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-033-00 protector kit include?\u003c\/strong\u003e The K71-033-00 kit includes a stainless steel hub protector cap and a fitted bra cover that installs over it for extra protection against dirt and moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trailer hubs is this protector kit compatible with?\u003c\/strong\u003e It fits 4,200 lb capacity hubs with a 5-lug, 5 on 4.5 inch bolt pattern, and 5,200 lb capacity hubs with a 6-lug, 6 on 5.5 inch bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bore size does the K71-033-00 protector fit?\u003c\/strong\u003e This Dexter protector kit is sized for a 2.328 inch bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K71-033-00 protector made of stainless steel?\u003c\/strong\u003e Yes, the protector cap is constructed of stainless steel for corrosion resistance in wet trailering conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-033-00 hub protector kit weigh?\u003c\/strong\u003e The kit weighs 0.99 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of a trailer hub protector kit?\u003c\/strong\u003e A hub protector kit like the Dexter K71-033-00 covers the wheel hub to help keep dirt, moisture, and road debris away from the bearing and seal area, reducing wear during towing and storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bra cover used for on this kit?\u003c\/strong\u003e The bra is a fitted cover that fits over the stainless steel protector cap for an added layer of defense against grime and splash-back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work with both 5-lug and 6-lug trailer hubs?\u003c\/strong\u003e The K71-033-00 kit is designed to fit both 5-lug (4,200 lb, 5 on 4.5 inch) and 6-lug (5,200 lb, 6 on 5.5 inch) hub configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, the K71-033-00 protector kit is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-033-00 kit?\u003c\/strong\u003e The UPC for this Dexter protector kit is 876983008223.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262703835,"sku":"DEX-K71-033-00","price":101.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-4.2k-5-lug-4.5-inch-bolt-5.2k-6-lug-5.5-inch-bolt-hub-trailer-buddy-protector-with-bra-k71-031-00__93840.1747363799.500.750.jpg?v=1785188085"},{"product_id":"dexter-k71-059-00-trailer-axle-bearing-seal-kit-for-3-2k-3-7k-axles-1-980-seal-bore-1-axle","title":"Dexter Bearing and Seal Replacement Kit K71-059-00, 545 Bearing, 1.980 Inch Outer Bore, 3.2K and 3.7K Axles, 1 Axle Set","description":"\u003cp\u003eThe Dexter K71-059-00 Bearing and Seal Replacement Kit supplies the bearings and seal needed to service one boat trailer axle rated for 3.2K and 3.7K applications. It is built around the 545 bearing with a 1.980 inch outer bore, matching the hub dimensions used on these axle capacities. This kit is intended for routine maintenance and repair when hub bearings show wear, run dry of grease, or fail an inspection, and it lets the owner replace the wearing components without buying a full hub assembly.\u003c\/p\u003e\u003cp\u003eBecause trailer bearings operate submerged and reheated with every launch and retrieval cycle, using a matched bearing and seal set from Dexter helps maintain the correct fit and seal engagement that a hub depends on for water resistance. Each kit is packaged to service a single axle; a trailer with two axles will require two kits, and tandem or triple-axle trailers should order a kit per axle serviced.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-059-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Number:\u003c\/strong\u003e 545\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bore:\u003c\/strong\u003e 1.980 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Rating:\u003c\/strong\u003e 3.2K and 3.7K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 1 axle per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.92 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008476\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e3.2K and 3.7K rated boat trailer axles using a 545 bearing with a 1.980 inch outer bore\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers available for this part\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-059-00 kit include?\u003c\/strong\u003e The K71-059-00 kit includes the bearings and seal needed to service one boat trailer axle, matched to the 545 bearing and 1.980 inch outer bore used on 3.2K and 3.7K rated axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many axles does one K71-059-00 kit cover?\u003c\/strong\u003e One kit covers a single axle, so a tandem-axle trailer needs two kits and a triple-axle trailer needs three.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outer bore size does this kit fit?\u003c\/strong\u003e This kit is sized for a 1.980 inch outer bore hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing number is used in this kit?\u003c\/strong\u003e The kit is built around the 545 bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacities is the K71-059-00 kit designed for?\u003c\/strong\u003e It is designed for axles rated at 3.2K and 3.7K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-059-00 kit weigh?\u003c\/strong\u003e The kit weighs 1.92 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K71-059-00 is a genuine Dexter part number, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace trailer axle bearings and seals?\u003c\/strong\u003e Bearings and seals should be replaced when they show wear, run dry of grease, overheat, or fail a routine hub inspection; the K71-059-00 kit supplies the parts needed for that service on one 3.2K\/3.7K axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-059-00 kit include grease?\u003c\/strong\u003e The kit supplies the bearings and seal for the axle; it does not list grease as an included item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this kit on both axles of a tandem-axle trailer?\u003c\/strong\u003e One K71-059-00 kit services only one axle, so a tandem-axle trailer requires two separate kits.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262867675,"sku":"DEX-K71-059-00","price":80.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-5-Lug-4-and-a-half-inch-Bolt_3200--37000lbs-Axle-Bearing-and-Seal-Replacement-Kit-K71-059-00__14299.1747363799.500.750.jpg?v=1785329082"},{"product_id":"ufp-by-dexter-k71-069-00-removable-torsion-trailing-arm-hardware-kit-for-5-200-lb-to-7-000-lb-idler-or-disc-axles","title":"Dexter Removable Torsion Trailing Arm and Hardware Kit K71-069-00, 5.2K thru 7K, for Idler or Disc Brake Axles","description":"\u003cp\u003eThe Dexter K71-069-00 Removable Torsion Trailing Arm and Hardware Kit is a replacement torsion arm assembly built for trailer axles rated 5.2K thru 7K, suited to axles equipped with either idler hubs or disc brakes. Torsion trailing arms are the suspension component that connects the axle beam to the hub end, allowing the axle to flex independently at each wheel for a smoother ride than a straight-beam setup. This kit is designed as a removable arm, meaning the trailing arm can be unbolted and replaced without disturbing the torsion axle's rubber cord suspension inside the axle tube, simplifying service when an arm is bent, cracked, or worn. The kit includes the trailing arm along with the hardware needed to mount it, so buyers do not need to source bolts or fasteners separately. It is intended for trailer owners, fabricators, and repair shops replacing a damaged or worn torsion arm on a boat trailer axle within the 5.2K to 7K capacity range. Because it fits axles set up for either idler or disc brake hub configurations, it covers both non-braked and disc-braked trailer axle applications built to this arm specification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-069-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity Rating:\u003c\/strong\u003e 5.2K thru 7K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Idler or Disc Brake Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10.51 x 10 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008759\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTorsion trailer axles rated 5.2K thru 7K\u003c\/li\u003e\n\u003cli\u003eAxles configured for an idler hub or a disc brake hub\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-069-00 kit used for?\u003c\/strong\u003e The Dexter K71-069-00 is a removable torsion trailing arm and hardware kit used to replace the trailing arm on a trailer axle rated 5.2K thru 7K, restoring the connection between the torsion axle beam and the hub end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this arm work with disc brakes or only idler hubs?\u003c\/strong\u003e Yes, the K71-069-00 is designed for axles set up for either an idler hub or a disc brake hub, so it covers both non-braked and disc-braked configurations within the 5.2K thru 7K range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is this torsion arm rated for?\u003c\/strong\u003e This Dexter trailing arm kit is rated for axles in the 5.2K thru 7K capacity range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the K71-069-00?\u003c\/strong\u003e Yes, the Dexter K71-069-00 kit includes the torsion trailing arm along with the hardware needed to mount it to the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-069-00 weigh?\u003c\/strong\u003e The Dexter K71-069-00 torsion trailing arm and hardware kit weighs 19.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this trailing arm kit?\u003c\/strong\u003e The K71-069-00 measures approximately 10.51 x 10 x 5.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number K71-069-00 is a Dexter branded torsion trailing arm and hardware kit, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this arm be removed without disturbing the torsion axle's rubber suspension?\u003c\/strong\u003e Yes, the K71-069-00 is a removable-style trailing arm, allowing it to be unbolted and replaced at the hub end without disassembling the torsion cords inside the axle tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho would need to install the K71-069-00 kit?\u003c\/strong\u003e Trailer owners or repair shops replacing a bent, cracked, or worn torsion trailing arm on a boat trailer axle rated 5.2K thru 7K would use the Dexter K71-069-00 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-069-00 fit both port and starboard axle ends?\u003c\/strong\u003e The Dexter K71-069-00 listing does not specify a side-specific left or right designation, as it is a trailing arm kit rather than a side-specific bracket.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991262998747,"sku":"DEX-K71-069-00","price":368.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Versa-Flex-Torsion-5200lbs-through-7000lbs-Arm--Hardware-Kit-K71-069-00__55966.1747363799.500.750.jpg?v=1785188124"},{"product_id":"dexter-k71-067-00-removable-torsion-arm-and-hardware-kit-3-700-lb-idler-disc-or-drum-trailer-axle","title":"Dexter K71-067-00 Removable Torsion Arm and Hardware Kit for 3.7K Idler, Disc, or Drum Trailer Axles","description":"\u003cp\u003eThe Dexter K71-067-00 is a removable torsion arm and hardware kit engineered for 3.7K-rated trailer axles, including boat trailer applications running idler, disc, or drum brake setups. This kit provides the hardware needed to mount or service a torsion arm assembly, letting the arm be removed and reinstalled without disturbing the torsion axle tube itself, which simplifies maintenance and brake service on trailer suspensions. Because it is rated for 3.7K axle capacity and configured for idler, disc, or drum brake compatibility, it is a common service and rebuild component for boat trailer axle assemblies using this torsion suspension design. The kit is sold under the Dexter brand, a widely used manufacturer of trailer axle and suspension components. Use it when replacing worn torsion arm hardware, rebuilding a trailer axle end, or servicing brake components on a 3.7K torsion axle. Always match the part number to your specific axle assembly before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-067-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Removable torsion arm and hardware kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Rating:\u003c\/strong\u003e 3.7K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Compatibility:\u003c\/strong\u003e Idler, disc, or drum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.81 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983008735\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 3.7K-rated trailer axles configured for idler, disc, or drum brakes.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-067-00 used for?\u003c\/strong\u003e It is a removable torsion arm and hardware kit for 3.7K-rated trailer axles, used to mount or service the torsion arm on axles running idler, disc, or drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the K71-067-00 rated for?\u003c\/strong\u003e This Dexter kit is rated for 3.7K trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-067-00 work with disc brakes, drum brakes, or idler axles?\u003c\/strong\u003e Yes, the Dexter K71-067-00 is compatible with idler, disc, or drum brake configurations on 3.7K axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the torsion arm described as removable?\u003c\/strong\u003e The K71-067-00 is designed as a removable torsion arm, meaning the arm and hardware can be taken off and reinstalled for service without replacing the entire torsion axle tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-067-00 kit weigh?\u003c\/strong\u003e The Dexter K71-067-00 torsion arm and hardware kit weighs 10.81 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the K71-067-00 torsion arm kit?\u003c\/strong\u003e The K71-067-00 is manufactured by Dexter, a trailer axle and suspension component manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-067-00 a complete axle or just hardware?\u003c\/strong\u003e K71-067-00 is a torsion arm and hardware kit, not a complete axle assembly; it is intended for servicing or rebuilding an existing torsion axle end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-067-00?\u003c\/strong\u003e The UPC for the Dexter K71-067-00 torsion arm and hardware kit is 876983008735.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K71-067-00 be used on boat trailers?\u003c\/strong\u003e Yes, this kit is categorized for boat trailer brake and axle service and fits 3.7K torsion axles used on boat trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for the K71-067-00?\u003c\/strong\u003e No OEM cross-reference or replacement part numbers are listed for the Dexter K71-067-00.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263031515,"sku":"DEX-K71-067-00","price":220.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Versa-Flex-Torsion-3700lbs-Arm--Hardware-Kit-K71-067-00__23735.1747363799.500.750.jpg?v=1785188490"},{"product_id":"dexter-k71-384-00-over-under-axle-conversion-kit-for-2-3-8-tube-trailer-suspension-upgrade-kit","title":"Dexter Over\/Under Conversion Kit K71-384-00 for 2-3\/8 Inch Axle Tube","description":"\u003cp\u003eThe Dexter K71-384-00 Over\/Under Conversion Kit converts a trailer suspension to an over\/under spring configuration on a 2-3\/8 inch axle tube. This kit is used when upgrading or rebuilding trailer axle suspension to change the spring mounting arrangement, giving the axle additional ground clearance or a different ride height depending on how the springs are positioned relative to the axle tube.\u003c\/p\u003e\u003cp\u003eThe kit is supplied as a complete set of the hardware and components needed to perform the conversion, so the builder is not left sourcing individual brackets and fasteners separately. It is built for the 2-3\/8 inch tube diameter specifically, so it is intended for axles of that tube size rather than as a universal fit across all tube diameters.\u003c\/p\u003e\u003cp\u003eAs a Dexter product, the kit is designed to work with Dexter axle and suspension systems and is sold as a defined parts package rather than a single component, making it straightforward to order once the axle tube size is confirmed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-384-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Axles \u0026amp; Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Over\/Under Conversion Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Size:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983001330\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Component Part Numbers:\u003c\/strong\u003e 003-064-00, 006-017-01, 006-094-00, 011-074-01, 012-051-02, 059-551-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 2-3\/8 inch axle tube.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-384-00 kit do?\u003c\/strong\u003e It converts a trailer axle suspension to an over\/under spring configuration on a 2-3\/8 inch axle tube, changing how the springs are mounted relative to the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle tube size is this kit designed for?\u003c\/strong\u003e The K71-384-00 kit is built for a 2-3\/8 inch axle tube and is not intended as a universal fit for other tube diameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-384-00 a complete kit or a single part?\u003c\/strong\u003e It is a complete kit, including the brackets and hardware components (part numbers 003-064-00, 006-017-01, 006-094-00, 011-074-01, 012-051-02, and 059-551-00) needed to perform the over\/under conversion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter over\/under conversion kit weigh?\u003c\/strong\u003e The K71-384-00 kit weighs 6.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the K71-384-00 conversion kit?\u003c\/strong\u003e The K71-384-00 Over\/Under Conversion Kit is made by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the K71-384-00?\u003c\/strong\u003e It is classified under axles and springs, specifically as a suspension component conversion kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit an axle with a different tube diameter?\u003c\/strong\u003e No, the K71-384-00 is sized for a 2-3\/8 inch tube; a different tube diameter would require a different conversion kit part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-384-00 kit?\u003c\/strong\u003e The UPC for this Dexter Over\/Under Conversion Kit is 876983001330.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need additional parts to complete the conversion?\u003c\/strong\u003e The K71-384-00 kit includes the component parts (003-064-00, 006-017-01, 006-094-00, 011-074-01, 012-051-02, and 059-551-00) needed for the over\/under conversion on a 2-3\/8 inch tube.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263588571,"sku":"DEX-K71-384-00","price":69.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Trailer-Springs-2-and-3-over-8-inch-Over-Under-Conversion-Kit-K71-384-00__06698.1747363797.500.750.jpg?v=1785329090"},{"product_id":"dexter-k71-385-00-over-under-axle-conversion-kit-for-3-round-tube-trailer-axles-tie-plate-kit","title":"Dexter Over\/Under Axle Conversion Kit K71-385-00 for 3 Inch Tube","description":"\u003cp\u003eThe Dexter Over\/Under Conversion Kit, part number K71-385-00, converts a single trailer axle setup into an over\/under (tandem-style) axle arrangement using a 3 inch axle tube. The kit is built around a tie plate that joins the axle components into the over\/under configuration, and it ships complete with the hardware needed for the conversion along with a printed instruction sheet that walks through the installation steps.\u003c\/p\u003e\u003cp\u003eThis kit is intended for trailer owners and fabricators upgrading or reconfiguring a 3 inch tube axle setup rather than replacing a single worn part, so it includes the full set of mounting hardware and the tie plate assembly rather than just one component. Because it is designed specifically for 3 inch tube axles, it is not a universal fit for other tube sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-385-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Over\/Under Conversion Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Axles \u0026amp; Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Size:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983001347\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Tie plate, mounting hardware, instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 3 inch axle tubes.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Dexter K71-385-00 kit do?\u003c\/strong\u003e It converts a 3 inch tube axle setup into an over\/under configuration using a tie plate and the included hardware, and it is sold under Dexter part number K71-385-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tube size does this conversion kit fit?\u003c\/strong\u003e The K71-385-00 kit is designed for 3 inch axle tubes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include instructions?\u003c\/strong\u003e Yes, the Dexter Over\/Under Conversion Kit K71-385-00 ships with a printed instruction sheet covering the conversion steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with K71-385-00?\u003c\/strong\u003e Yes, the kit includes the tie plate along with the mounting hardware needed to complete the over\/under conversion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-385-00 kit weigh?\u003c\/strong\u003e The Dexter Over\/Under Conversion Kit K71-385-00 weighs 8.31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K71-385-00 is the Dexter manufacturer part number for this over\/under conversion kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on a 2 inch or 3.5 inch axle tube?\u003c\/strong\u003e No, the K71-385-00 kit is specified for 3 inch tube axles; it is not listed for other tube diameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a tie plate used for in this kit?\u003c\/strong\u003e The tie plate is the core component of the K71-385-00 kit that joins the axle assembly into the over\/under configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit a replacement part or an upgrade kit?\u003c\/strong\u003e The Dexter K71-385-00 is an over\/under conversion kit intended to reconfigure a 3 inch tube axle setup, rather than a single replacement component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes K71-385-00 include all the hardware needed for installation?\u003c\/strong\u003e Yes, the kit is supplied with the tie plate, hardware, and an instruction sheet as a complete conversion kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263686875,"sku":"DEX-K71-385-00","price":77.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Trailer-Springs-Over-Under-Conversion-Kit-K71-385-00__76418.1747363797.500.750.jpg?v=1785329089"},{"product_id":"dexter-k71-314-04-trailer-hub-dust-cap-pair-1-99-in-od-fits-dexter-7-in-and-10-in-hubs","title":"Dexter Grease Cap K71-314-04, 1.99 Inch OD, Fits 7 Inch and 10 Inch Trailer Hubs, Pair","description":"\u003cp\u003eThe Dexter K71-314-04 grease cap presses into the end of a trailer hub to seal the bearing cavity, keeping grease in and water, dirt, and road debris out. It is sized with a 1.99 inch outside diameter and is engineered to fit Dexter 7 inch hubs as well as 10 inch x 1-1\/2 inch and 10 inch x 2-1\/4 inch hubs. This cap is sold as a pair, so a single purchase covers both hub ends on one axle.\u003c\/p\u003e\u003cp\u003eKeeping the grease cap intact and properly seated is a basic maintenance item for trailer hub and bearing service: a cracked, corroded, or missing cap allows grease to leak out and lets water into the bearing race, which accelerates bearing wear and can lead to a failed wheel bearing on the road. Because it presses in without tools, the K71-314-04 is a straightforward replacement during routine bearing repacking or hub service.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-314-04\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Grease Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1.99 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Hub Sizes:\u003c\/strong\u003e 7 inch, 10 inch x 1-1\/2 inch, 10 inch x 2-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold as a pair (2 caps)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983010486\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDexter 7 inch hub\u003c\/li\u003e\n\u003cli\u003eDexter 10 inch x 1-1\/2 inch hub\u003c\/li\u003e\n\u003cli\u003eDexter 10 inch x 2-1\/4 inch hub\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hubs does the Dexter K71-314-04 grease cap fit?\u003c\/strong\u003e The K71-314-04 fits Dexter 7 inch hubs and 10 inch x 1-1\/2 inch and 10 inch x 2-1\/4 inch hubs, with a 1.99 inch outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many caps come in this listing?\u003c\/strong\u003e The Dexter K71-314-04 is sold as a pair, so you get two grease caps, enough for both hub ends on one axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of this grease cap?\u003c\/strong\u003e 1.99 inches is the outside diameter of the K71-314-04 grease cap, sized to press into 7 inch and 10 inch Dexter hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a grease cap or a dust cap?\u003c\/strong\u003e It is a grease cap, designed to press into the outer end of the hub and seal the bearing cavity, keeping grease in and contaminants out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-314-04 grease cap weigh?\u003c\/strong\u003e Each package of the Dexter K71-314-04 weighs 0.21 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this grease cap installed?\u003c\/strong\u003e The K71-314-04 is a press-fit cap that seats into the end bore of the trailer hub, typically installed by hand or gently tapped in during bearing repacking or hub service; no fasteners are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cap fit a 10 inch x 2-1\/4 inch hub with a 4.4K rating and 12 inch hubs?\u003c\/strong\u003e No. The larger 10 inch x 2-1\/4 inch (4.4K), 12 inch x 2 inch, 5 spoke, and 6 bolt hubs use Dexter's K71-316-00 grease cap, which has a 2.45 inch outside diameter, not the K71-314-04.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a trailer hub need a grease cap?\u003c\/strong\u003e A grease cap like the K71-314-04 seals the outer end of the hub bearing cavity, retaining lubricant and blocking water and road debris; a damaged or missing cap can lead to grease loss and premature bearing failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-314-04 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-314-04 is the Dexter part number for this 1.99 inch outside diameter grease cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hub does this cap not fit?\u003c\/strong\u003e The K71-314-04, with its 1.99 inch OD, does not fit Dexter's larger 2.45 inch OD hubs (10 inch x 2-1\/4 inch 4.4K, 12 inch x 2 inch, 5 spoke and 6 bolt); those use the K71-316-00 cap instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package?\u003c\/strong\u003e The Dexter K71-314-04 listing includes a pair of grease caps (two caps total).\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263817947,"sku":"DEX-K71-314-04","price":5.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-81167_lg__12082.1558133774.500.750.jpg?v=1785188534"},{"product_id":"dexter-k71-859-00-oil-cap-assembly-kit-for-10k-16k-oil-bath-trailer-axles","title":"Dexter Oil Cap Assembly Kit K71-859-00, 10-16K Capacity Axle Hubs","description":"\u003cp\u003eThe Dexter K71-859-00 Oil Cap Assembly Kit is a replacement oil cap assembly for oil-bath trailer hubs rated for 10-16K capacity axles. It is built for boat trailer brake and hub systems where the hub is lubricated with oil rather than grease, and the cap assembly seals the hub cavity to keep oil in and contaminants out. This kit is sold as a complete assembly for straightforward replacement when an existing oil cap is cracked, leaking, or missing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-859-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Oil Cap Assembly Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity Rating:\u003c\/strong\u003e 10-16K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007219\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e10-16K capacity oil-bath trailer hubs\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-859-00?\u003c\/strong\u003e The K71-859-00 is a Dexter Oil Cap Assembly Kit for 10-16K capacity oil-bath trailer hubs, used to reseal the hub cavity that holds the lubricating oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this oil cap assembly for?\u003c\/strong\u003e The K71-859-00 Oil Cap Assembly Kit is rated for 10-16K capacity axle hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cap for oil-bath hubs or grease hubs?\u003c\/strong\u003e It is an oil cap assembly, meaning it is designed for oil-bath trailer hubs rather than grease-packed hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-859-00 weigh?\u003c\/strong\u003e The Dexter K71-859-00 Oil Cap Assembly Kit weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, the K71-859-00 is a Dexter brand part identified by Dexter's own manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is this?\u003c\/strong\u003e The K71-859-00 is listed under boat trailer brakes and hub hardware, since oil-bath hub systems are commonly paired with trailer brake assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-859-00 come as a full assembly?\u003c\/strong\u003e Yes, it is sold as an oil cap assembly kit rather than a single component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with this Dexter part?\u003c\/strong\u003e The Dexter Oil Cap Assembly Kit K71-859-00 carries UPC 876983007219.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace an oil cap assembly like the K71-859-00?\u003c\/strong\u003e An oil cap assembly such as the K71-859-00 is typically replaced when the existing cap on a 10-16K capacity oil-bath hub is cracked, leaking, or missing, since a compromised cap can let hub oil escape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the K71-859-00 fit a grease-cap hub?\u003c\/strong\u003e No, the K71-859-00 is an oil cap assembly built for 10-16K oil-bath hubs, not for hubs designed around a grease cap.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264112859,"sku":"DEX-K71-859-00","price":134.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/K71-859-00-2__42290.1747363797.500.750.jpg?v=1785329089"},{"product_id":"trailer-axle-spindle-nut-kit-with-washer-and-cotter-pin-1-14-uns-thread-mpn-k71-g01-50","title":"Dexter Axle Nut, Washer and Cotter Pin Kit, 1\"-14 UNS Threads, K71-G01-50","description":"\u003cp\u003eThe Dexter K71-G01-50 is an axle nut, washer, and cotter pin kit sized for 1\"-14 UNS threaded trailer axle spindles. It is used to secure the wheel bearing assembly onto the spindle, providing the correct clamping hardware for hub and bearing service, repacking, or a full hub replacement. The kit bundles the three fasteners needed for a proper spindle-nut installation: a spindle nut, a flat washer, and a cotter pin, so you have matched hardware on hand rather than sourcing each piece separately.\u003c\/p\u003e\u003cp\u003eThe nut and washer are made from alloy steel for the strength needed to maintain proper bearing preload under trailer loads, and the cotter pin locks the spindle nut in place to prevent it from backing off during towing. Because the components are sized to 1\"-14 UNS threads, this kit is intended for trailer axle spindles that use that thread pitch. It is a straightforward, low-cost item to keep on hand for routine hub and bearing maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G01-50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\"-14 UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e Spindle nut, washer, cotter pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Cotter pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.75 x 3.75 x 1.62 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trailer axle spindle \/ hub and bearing hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K71-G01-50 kit?\u003c\/strong\u003e The kit includes a spindle nut, a flat washer, and a cotter pin, the three fasteners needed to secure a trailer hub and bearing assembly onto the axle spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this kit fit?\u003c\/strong\u003e The Dexter K71-G01-50 nut and washer are sized for 1\"-14 UNS threaded trailer axle spindles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the nut and washer made of?\u003c\/strong\u003e Both the nut and washer in the K71-G01-50 kit are alloy steel for durability under bearing preload.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G01-50 kit weigh?\u003c\/strong\u003e This Dexter hardware kit weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cotter pin used for in this kit?\u003c\/strong\u003e The cotter pin passes through a drilled hole in the spindle and the castellated spindle nut to lock the nut in place so it cannot loosen during towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace this hardware?\u003c\/strong\u003e Replace the spindle nut, washer, and cotter pin whenever you service or repack a trailer wheel bearing, since a used cotter pin should not be reinstalled and the nut and washer should be inspected for wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-G01-50 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-G01-50 is the Dexter manufacturer part number for this nut, washer, and cotter pin kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work on any trailer axle?\u003c\/strong\u003e It is sized for spindles with 1\"-14 UNS threads; check your spindle thread size before ordering to confirm fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of this kit?\u003c\/strong\u003e The K71-G01-50 kit measures 6.75 x 3.75 x 1.62 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the nut or just the cotter pin separately?\u003c\/strong\u003e The K71-G01-50 is sold as a complete kit containing the nut, washer, and cotter pin together rather than as individual components.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264702683,"sku":"DEX-K71-G01-50","price":6.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-81169_lg__83843.1558133879.500.750.jpg?v=1785188671"},{"product_id":"dexter-k71-g01-51-trailer-wheel-lug-nuts-1-2-20-unc-silver-5-pack","title":"Dexter 1\/2 Inch Lug Nuts, 5-Pack, Trailer Wheel Lug Nuts K71-G01-51","description":"\u003cp\u003eThe Dexter K71-G01-51 is a 5-pack of 1\/2 inch wheel lug nuts built for trailer hub and bearing assemblies. Each nut uses a Unified National Coarse (UNC) thread with a standard right-hand thread direction, so it installs with common wheel lug hardware and torque tools. The nuts are made from alloy steel and stainless steel for a durable, corrosion-resistant fastener that stands up to road grime, moisture, and repeated mounting cycles on trailer wheels.\u003c\/p\u003e\u003cp\u003eFinished in silver, the lug nuts measure 2 x 2 x 2 inches and carry a commercial grade rating, making them suited to routine trailer wheel maintenance, replacement of worn or rounded-off lug nuts, and general trailer hub servicing. The pack includes 5 lug nuts, matching a single wheel's worth of hardware in one purchase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G01-51\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Unified National Coarse (UNC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Style:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade Rating:\u003c\/strong\u003e Commercial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2 x 2 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 5 lug nuts per pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many lug nuts come in the Dexter K71-G01-51 pack?\u003c\/strong\u003e The Dexter K71-G01-51 pack includes 5 lug nuts, enough for one trailer wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size do these lug nuts use?\u003c\/strong\u003e The Dexter K71-G01-51 lug nuts have a 1\/2 inch Unified National Coarse (UNC) thread with a standard right-hand thread direction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Dexter K71-G01-51 lug nuts made from?\u003c\/strong\u003e These lug nuts are made from alloy steel and stainless steel for durability and corrosion resistance in trailer wheel applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color finish do the lug nuts have?\u003c\/strong\u003e The Dexter K71-G01-51 lug nuts have a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the individual lug nuts?\u003c\/strong\u003e Each Dexter K71-G01-51 lug nut measures 2 x 2 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the pack weigh?\u003c\/strong\u003e The 5-pack of Dexter K71-G01-51 lug nuts weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these lug nuts rated for commercial use?\u003c\/strong\u003e Yes, the Dexter K71-G01-51 lug nuts carry a commercial grade rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-G01-51 used for?\u003c\/strong\u003e The Dexter K71-G01-51 lug nuts are used to mount and secure wheels on trailer hub and bearing assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these lug nuts fit standard trailer wheel studs with a right-hand thread?\u003c\/strong\u003e Yes, the Dexter K71-G01-51 lug nuts use a standard right-hand UNC thread compatible with common trailer wheel studs of the same thread size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K71-G01-51 sold as a single lug nut or a set?\u003c\/strong\u003e It is sold as a set of 5 lug nuts, not a single unit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264735451,"sku":"DEX-K71-G01-51","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-81172_lg__26903.1558133988.500.750.jpg?v=1785188259"},{"product_id":"super-lube-marine-dust-cap-with-grommet-trailer-hub-bearing-protector-mpn-k71-g01-71","title":"Dexter Trailer Hub Dust Cap with Grommet, Super Lube, K71-G01-71","description":"\u003cp\u003eThe Dexter K71-G01-71 is a dust cap with grommet designed for use with Super Lube style trailer hub and bearing systems. It seals the hub cavity to keep dirt, water, and road debris out of the wheel bearings while the integrated grommet allows grease to be added through a Super Lube fitting without removing the cap. This makes routine bearing lubrication faster and helps extend bearing life by reducing the need to disassemble the hub for maintenance.\u003c\/p\u003e\u003cp\u003eIt is intended for trailer hub and bearing assemblies and is a straightforward, low-cost part to keep on hand for scheduled maintenance or as a replacement if a cap is lost, cracked, or worn out.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G01-71\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature:\u003c\/strong\u003e Grommet included for Super Lube grease fitting access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983010493\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter K71-G01-71 used for?\u003c\/strong\u003e The Dexter K71-G01-71 is a dust cap with grommet used to seal a trailer hub and keep dirt and water out of the wheel bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-G01-71 dust cap include a grommet?\u003c\/strong\u003e Yes, the Dexter K71-G01-71 comes with a grommet built in, which lets you add grease through a Super Lube fitting without removing the cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G01-71 dust cap weigh?\u003c\/strong\u003e It weighs 0.24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the K71-G01-71 compatible with Super Lube hub systems?\u003c\/strong\u003e Yes, this Dexter dust cap with grommet is designed for use with Super Lube style trailer hub and bearing setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the Dexter K71-G01-71?\u003c\/strong\u003e The K71-G01-71 is listed under Trailer Hubs \u0026amp; Bearings, since it is a dust cap component for a trailer hub assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to remove the K71-G01-71 cap to grease the bearings?\u003c\/strong\u003e No, the grommet on the Dexter K71-G01-71 allows grease to be added through the Super Lube fitting while the cap stays in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter K71-G01-71?\u003c\/strong\u003e The UPC for this Dexter dust cap with grommet is 876983010493.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter K71-G01-71 a genuine Dexter part?\u003c\/strong\u003e Yes, K71-G01-71 is the Dexter manufacturer part number for this dust cap with grommet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace a trailer hub dust cap like the K71-G01-71?\u003c\/strong\u003e You would replace a dust cap such as the Dexter K71-G01-71 if it is cracked, missing, or worn, since a damaged cap can let dirt and water reach the bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the Dexter K71-G01-71?\u003c\/strong\u003e The Dexter K71-G01-71 is supplied as a dust cap with the grommet already fitted for Super Lube grease access.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264932059,"sku":"DEX-K71-G01-71","price":13.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-81168_lg__10742.1558133848.500.750.jpg?v=1785188356"},{"product_id":"dexter-k71-g02-21-trailer-wheel-bearing-kit-for-1-1-16-x-3-4-spindles-with-dust-cap","title":"Dexter Bearing Kit K71-G02-21, 1-1\/16 x 3\/4 Inch Spindle with Dust Cap","description":"\u003cp\u003eThe Dexter K71-G02-21 is a complete trailer hub bearing kit sized for a 1-1\/16 inch x 3\/4 inch tapered spindle, the sizing found on many single-axle boat and utility trailers. The kit uses precision-tapered roller bearings paired with matching cups so the hub rotates smoothly under load while resisting the side loading trailers see on turns and rough roads. Everything needed to service one hub is included in a single kit: two bearing cones, two matching cups, a grease seal, a cotter pin, and a dust cap, so there is no need to hunt down individual components separately.\u003c\/p\u003e\u003cp\u003eThis kit is intended for trailer hub rebuilds and routine bearing maintenance, replacing worn, pitted, or noisy bearings before they lead to hub failure or a lost wheel on the road. Because the cones, cups, seal, cotter pin, and dust cap are matched as a set, fitment and clearance are correct out of the box, which helps avoid the improper preload or seal leaks that can result from mixing components from different sources.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-21\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle O.D.:\u003c\/strong\u003e 1-1\/16 inch x 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 1.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two bearing cones, two bearing cups, seal, cotter pin, dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Tapered roller bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9.75 x 5.25 x 1.5 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does the Dexter K71-G02-21 bearing kit fit?\u003c\/strong\u003e The K71-G02-21 is sized for a 1-1\/16 inch x 3\/4 inch tapered spindle, a common size on single-axle boat and utility trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-G02-21 kit?\u003c\/strong\u003e This kit includes two bearing cones, two matching bearing cups, a grease seal, a cotter pin, and a dust cap, everything needed to service one hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include the dust cap?\u003c\/strong\u003e Yes, a dust cap is included along with the cones, cups, seal, and cotter pin in the K71-G02-21 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the cones and cups matched to each other?\u003c\/strong\u003e Yes, the two cones and two cups in the K71-G02-21 kit are matched sets, which keeps clearance and preload correct without mixing components from different sources.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bearing is used in this kit?\u003c\/strong\u003e The K71-G02-21 uses precision-tapered roller bearings, which handle both radial and side loading on a trailer hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-21 bearing kit weigh?\u003c\/strong\u003e The kit weighs 0.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the outside dimensions of the K71-G02-21 packaging?\u003c\/strong\u003e The item measures 9.75 x 5.25 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit for one hub or a full axle?\u003c\/strong\u003e The K71-G02-21 is packaged as a single hub kit with two cones and two cups; a full axle with two hubs requires two kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outside diameter of the bearing cups in this kit?\u003c\/strong\u003e The bearing cups have an outside diameter of 1.06 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace my trailer bearing kit?\u003c\/strong\u003e Replace a trailer bearing kit like the K71-G02-21 when bearings show pitting, noise, excess play, or after a hub has run hot or been submerged for an extended period.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991264997595,"sku":"DEX-K71-G02-21","price":28.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61G7V4q4pEL.jpg?v=1784498678"},{"product_id":"1-1-16-trailer-hub-bearing-kit-with-dust-cap-mpn-k71-g02-34-for-1-1-16-spindles","title":"Dexter 1-1\/16 Inch Trailer Bearing Kit with Dust Cap, K71-G02-34","description":"\u003cp\u003eThe Dexter K71-G02-34 is a complete trailer bearing kit built around a 1-1\/16 inch spindle, giving you every wear component needed to service one hub in a single package. The kit includes 2 bearing cones, 2 bearing cups, a grease seal, a cotter pin, and a dust cap, so you are not left hunting for a missing piece mid-repair. The bearings are roller-bearing type and are designed to run on grease lubricant, matching standard trailer hub service practice.\u003c\/p\u003e\u003cp\u003eThis kit is intended for trailer axle and hub assemblies fitted with a 1-1\/16 inch spindle. Because it bundles both the inner and outer cone-and-cup sets along with the seal and dust cap, it covers a full bearing service in one purchase rather than requiring separate orders for each part. It is a straightforward fit for routine maintenance, bearing replacement after a failure, or as part of a wheel-off inspection and repack.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-34\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Diameter:\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Roller Bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 bearing cones, 2 bearing cups, 1 grease seal, 1 cotter pin, 1 dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12.5 x 10 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.68 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does the Dexter K71-G02-34 bearing kit fit?\u003c\/strong\u003e The K71-G02-34 kit is sized for a 1-1\/16 inch spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-G02-34 kit?\u003c\/strong\u003e This Dexter kit includes 2 bearing cones, 2 bearing cups, a grease seal, a cotter pin, and a dust cap, covering a full bearing service for one hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-G02-34 kit come with both inner and outer bearings?\u003c\/strong\u003e Yes, the kit contains 2 cones and 2 cups, which provide both the inner and outer bearing sets needed for one hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bearing is used in this kit?\u003c\/strong\u003e Dexter K71-G02-34 uses roller-type bearings for the cone and cup sets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lubricant should be used with the K71-G02-34 bearing kit?\u003c\/strong\u003e Grease is the compatible lubricant for the bearings in the K71-G02-34 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include a dust cap?\u003c\/strong\u003e Yes, a dust cap is included along with the bearing cones, cups, seal, and cotter pin in the K71-G02-34 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-34 bearing kit weigh?\u003c\/strong\u003e The Dexter K71-G02-34 bearing kit weighs 0.68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the K71-G02-34 kit?\u003c\/strong\u003e The kit measures 12.5 x 10 x 6 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a grease seal included with the K71-G02-34 kit?\u003c\/strong\u003e Yes, a grease seal is part of the K71-G02-34 kit contents along with the cones, cups, cotter pin, and dust cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cotter pin included or sold separately?\u003c\/strong\u003e The cotter pin is included in the Dexter K71-G02-34 bearing kit, not sold separately.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265128667,"sku":"DEX-K71-G02-34","price":24.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51U0N1uU5sL.jpg?v=1784498696"},{"product_id":"dexter-k71-g02-44-1-inch-trailer-wheel-bearing-kit-with-dust-cap","title":"Dexter K71-G02-44 1 Inch Bearing Kit with Dust Cap for Trailer Hubs","description":"\u003cp\u003eThe Dexter K71-G02-44 is a complete 1 inch bearing kit built to service trailer hubs that use this bore size. Each kit includes everything needed to rebuild one hub position: two bearing cones, two bearing cups, a grease seal, a cotter pin, and a dust cap, so you are not left hunting for a missing seal or cap after the job is started. The 1 inch bore diameter matches the bearing cones and cups to standard trailer hub spindles sized for this bearing set, and the kit is compatible with grease-type lubrication, making it suited to routine hub maintenance, bearing repacking, and full bearing replacement on trailers with worn, pitted, or noisy hubs. Keeping a matched cone-and-cup bearing kit on hand is useful for trailer owners who want to replace both halves of the bearing together rather than mixing a new cone with an old cup, which can accelerate wear. The kit's compact dimensions and light weight make it easy to store in a tow vehicle or trailer toolbox for roadside hub service. Order by part number K71-G02-44 to make sure the bore diameter and included components match your hub.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 bearing cones, 2 bearing cups, 1 seal, 1 cotter pin, 1 dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricant Compatibility:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9.7 x 5.2 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.72 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983010141\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K71-G02-44 bearing kit?\u003c\/strong\u003e The K71-G02-44 kit includes 2 bearing cones, 2 bearing cups, 1 grease seal, 1 cotter pin, and 1 dust cap, giving you everything needed to rebuild one hub position in a single package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bore diameter does this bearing kit fit?\u003c\/strong\u003e The Dexter K71-G02-44 bearing kit has a 1 inch bore diameter, matching trailer hub spindles sized for this bearing set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lubricant should be used with this bearing kit?\u003c\/strong\u003e Grease is the compatible lubricant for the Dexter K71-G02-44 bearing kit, consistent with standard trailer hub bearing maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-G02-44 kit come with a dust cap?\u003c\/strong\u003e Yes, a dust cap is included in the Dexter K71-G02-44 bearing kit along with the bearing cones, cups, seal, and cotter pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G02-44 bearing kit weigh?\u003c\/strong\u003e This bearing kit weighs 0.72 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the bearing kit packaging?\u003c\/strong\u003e The Dexter K71-G02-44 bearing kit measures 9.7 x 5.2 x 1.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace both the bearing cone and cup together?\u003c\/strong\u003e Yes, the K71-G02-44 kit pairs matched bearing cones and cups so both halves of each bearing are replaced together, which helps avoid the uneven wear that can occur when a new cone is paired with an old cup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bearing kit for a specific side of the trailer?\u003c\/strong\u003e The Dexter K71-G02-44 kit is a standard 1 inch bore bearing kit and is not designated for a specific left or right side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for routine hub maintenance rather than a full repair?\u003c\/strong\u003e Yes, the K71-G02-44 kit is suited to both routine bearing repacking and full bearing replacement on hubs using a 1 inch bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I reference when ordering this kit?\u003c\/strong\u003e Reference part number K71-G02-44 when ordering this Dexter bearing kit to confirm the bore diameter and included components match your hub.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265161435,"sku":"DEX-K71-G02-44","price":24.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71nXkFYZQJL.jpg?v=1784498698"},{"product_id":"1-1-4-trailer-hub-bearing-kit-with-dust-cap-mpn-k71-g02-36-2-cones-2-cups-seal-cotter-pin-dust-cap","title":"Dexter 1-1\/4 Inch Trailer Bearing Kit with Dust Cap, K71-G02-36","description":"\u003cp\u003eThis Dexter 1-1\/4 inch bearing kit, part number K71-G02-36, is a complete trailer hub bearing set built for trailer hubs using a 1-1\/4 inch spindle diameter. The kit is supplied as a full set rather than individual components, giving trailer owners everything needed to service a hub in one purchase: two bearing cones, two bearing cups, a seal, a cotter pin, and a dust cap. Each cone-and-cup pair is matched as a set, so the bearing races and rollers seat and wear correctly together once installed.\u003c\/p\u003e\u003cp\u003eThe bearings are roller-style bearings intended to run on grease lubrication, matching standard trailer hub servicing practice. The included seal keeps grease in and water and road debris out of the hub cavity, while the cotter pin secures the spindle nut and the dust cap caps off the hub to keep the packed grease clean and protected from the elements. This makes the K71-G02-36 kit suited to routine trailer hub maintenance, bearing replacement after a repack, or rebuilding a hub that has failed a bearing inspection.\u003c\/p\u003e\u003cp\u003eBecause the kit bundles the cones, cups, seal, cotter pin, and dust cap together, it is intended for hubs sized for a 1-1\/4 inch bearing kit and simplifies ordering versus sourcing each part separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-36\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Size:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 bearing cones, 2 bearing cups, 1 seal, 1 cotter pin, 1 dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Roller Bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.99 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter K71-G02-36 bearing kit?\u003c\/strong\u003e The K71-G02-36 kit includes 2 bearing cones, 2 bearing cups, a seal, a cotter pin, and a dust cap, giving you a complete set to service a 1-1\/4 inch trailer hub in a single purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does this bearing kit fit?\u003c\/strong\u003e This Dexter kit is sized for a 1-1\/4 inch bearing, matching trailer hubs built for that spindle diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearing cones and cups sold as matched sets?\u003c\/strong\u003e Yes, the K71-G02-36 kit pairs each cone with its matching cup, which is how trailer bearings should be installed so the rollers and races wear evenly together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of bearing is used in this kit?\u003c\/strong\u003e The Dexter K71-G02-36 kit uses roller-type bearings, the standard bearing style used in trailer hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lubricant should be used with this bearing kit?\u003c\/strong\u003e Grease is the compatible lubricant for the K71-G02-36 bearing kit, consistent with standard trailer hub packing practice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a dust cap?\u003c\/strong\u003e Yes, a dust cap is included with the K71-G02-36 kit to keep packed grease clean and protected once the hub is serviced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with a seal and cotter pin?\u003c\/strong\u003e Both are included: the seal keeps grease in and contaminants out of the hub, and the cotter pin is used to secure the spindle nut after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G02-36 bearing kit weigh?\u003c\/strong\u003e This bearing kit weighs 0.99 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit suitable for repacking trailer hub bearings?\u003c\/strong\u003e Yes, the K71-G02-36 kit contains the cones, cups, seal, cotter pin, and dust cap needed for a full bearing repack or replacement on a 1-1\/4 inch trailer hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just one bearing cone or cup from this kit?\u003c\/strong\u003e The K71-G02-36 is sold as a complete kit with 2 cones, 2 cups, a seal, a cotter pin, and a dust cap rather than as individual components.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265259739,"sku":"DEX-K71-G02-36","price":29.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61um-ER1gOL.jpg?v=1784498702"},{"product_id":"1-1-4-x-3-4-trailer-wheel-bearing-kit-with-dust-cap-tapered-roller-bearings-seal-and-cap-mpn-k71-g02-52","title":"Dexter Bearing Kit K71-G02-52, 1-1\/4 Inch x 3\/4 Inch Spindle with Dust Cap","description":"\u003cp\u003eThe Dexter K71-G02-52 bearing kit is a complete tapered roller bearing set sized for a 1-1\/4 inch by 3\/4 inch trailer spindle. It is built to support the hub assembly on a boat trailer or utility trailer axle, carrying the radial and thrust loads created as the wheel rotates and as the trailer turns, brakes, and travels over uneven road surfaces. The kit uses precision-tapered roller bearings, which distribute load across the full length of the roller rather than a single point, giving longer service life and more consistent rolling resistance than a straight ball bearing under the combined side and vertical loads a trailer axle sees.\u003c\/p\u003e\u003cp\u003eEach kit includes both halves of the bearing assembly (two cones and two cups), so the inner and outer bearing races are matched and ready to press into the hub without needing to source components separately. A grease seal and cotter pin are included to retain lubricant and secure the spindle nut, and a dust cap is included to keep water, grit, and road debris out of the hub cavity. The bearings are compatible with standard grease-based lubrication used in trailer hub service.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-52\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Outside Diameter:\u003c\/strong\u003e 1-1\/4 inch x 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Tapered roller bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two bearing cones, two bearing cups, grease seal, cotter pin, dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.81 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does the Dexter K71-G02-52 bearing kit fit?\u003c\/strong\u003e This kit is sized for a 1-1\/4 inch by 3\/4 inch trailer spindle, matching the stepped diameter common on boat and utility trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-G02-52 kit?\u003c\/strong\u003e The kit includes two bearing cones, two bearing cups, a grease seal, a cotter pin, and a dust cap, giving you a complete matched set for one hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearings in this kit tapered roller bearings?\u003c\/strong\u003e Yes, the Dexter K71-G02-52 kit uses tapered roller bearings, which handle combined radial and thrust loads better than straight ball bearings under trailer axle conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with a dust cap?\u003c\/strong\u003e Yes, a dust cap is included with the K71-G02-52 kit to keep water and debris out of the hub after the bearings are installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of grease should be used with this bearing kit?\u003c\/strong\u003e The Dexter K71-G02-52 bearings are compatible with standard trailer wheel bearing grease.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-52 bearing kit weigh?\u003c\/strong\u003e The kit weighs 0.81 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy the cups and cones separately?\u003c\/strong\u003e No, the K71-G02-52 kit includes both the cones and matching cups as a set, so the races are already paired for correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a cotter pin included with the K71-G02-52 kit?\u003c\/strong\u003e Yes, a cotter pin for securing the spindle nut is included along with the bearings, seal, and dust cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for boat trailers?\u003c\/strong\u003e Yes, the 1-1\/4 inch by 3\/4 inch spindle fit of the K71-G02-52 kit is a common size used on boat trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-G02-52 kit include a grease seal?\u003c\/strong\u003e Yes, a grease seal is included in the kit to retain lubricant inside the hub.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991265325275,"sku":"DEX-K71-G02-52","price":28.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71NIRHFZWfL.jpg?v=1784498703"},{"product_id":"dexter-k71-g03-11-trailer-wheel-lug-bolts-1-2-in-grade-5-set-of-5","title":"Dexter K71-G03-11 Trailer Lug Bolts, 1\/2 Inch Grade 5, Set of 5","description":"\u003cp\u003eThe Dexter K71-G03-11 is a set of five 1\/2 inch trailer lug bolts used to secure a trailer wheel to the hub. Each bolt is manufactured from Grade 5 carbon steel with a black oxide finish for corrosion resistance, and features a hex head for use with a standard socket or lug wrench. The bolts have a 0.5 inch diameter with UNC (Unified National Coarse) right-hand threads, thread class 3A, and are single-end threaded for installation into the wheel hub. This lug bolt set is intended for upkeep and repair of trailer wheel hardware, replacing worn, corroded, or damaged bolts to keep wheels properly and safely fastened. The Grade 5 hardness rating provides a higher clamping strength than standard-grade fasteners, making it suitable for the repeated torque loads a trailer hub experiences on the road. Sold as a set of 5, the K71-G03-11 provides enough bolts for one full wheel on most standard trailer hub patterns. This product is part of Dexter's trailer hubs and bearings hardware line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G03-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Set of 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e 1\/2 inch UNC, Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Class:\u003c\/strong\u003e 3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Type:\u003c\/strong\u003e Hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive System:\u003c\/strong\u003e External Hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.73 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983010516\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many lug bolts come in the Dexter K71-G03-11 set?\u003c\/strong\u003e The K71-G03-11 is sold as a set of 5 lug bolts, enough for one full trailer wheel on most standard hub patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are these lug bolts?\u003c\/strong\u003e Each bolt in the K71-G03-11 set has a 0.5 inch diameter with 1\/2 inch UNC (Unified National Coarse) right-hand threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade of steel is the K71-G03-11 made from?\u003c\/strong\u003e Grade 5 carbon steel, which provides higher clamping strength than standard-grade fasteners for repeated wheel-mounting torque loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K71-G03-11 have a corrosion-resistant finish?\u003c\/strong\u003e Yes, the bolts have a black oxide finish to help resist corrosion during normal trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of head do these lug bolts have?\u003c\/strong\u003e A hex head, so they install and remove with a standard socket or lug wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread class are the K71-G03-11 lug bolts?\u003c\/strong\u003e Thread class 3A, with single-end threading for installation into the wheel hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K71-G03-11 lug bolt set weigh?\u003c\/strong\u003e The 5-bolt set weighs 0.73 pounds total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the K71-G03-11 used for?\u003c\/strong\u003e It is used to secure a trailer wheel to the hub, and is commonly purchased to replace worn, corroded, or damaged lug bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K71-G03-11 the correct part number to order?\u003c\/strong\u003e Yes, K71-G03-11 is the Dexter part number for this 1\/2 inch Grade 5 lug bolt set of 5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these lug bolts left-hand or right-hand threaded?\u003c\/strong\u003e Right-hand threaded, using standard UNC thread form.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991266373851,"sku":"DEX-K71-G03-11","price":9.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-81170_lg__28790.1722489557.500.750.jpg?v=1785188188"},{"product_id":"trailer-wheel-bearing-kit-k71-g02-53-1-1-16-in-x-1-3-8-in-axle-set-with-dust-cap-seal-and-cotter-pin","title":"Dexter K71-G02-53 Trailer Wheel Bearing Kit, 1-3\/8 Inch x 1-1\/16 Inch, with Dust Cap","description":"\u003cp\u003eThe Dexter K71-G02-53 is a complete trailer wheel bearing kit sized for a 1-3\/8 inch x 1-1\/16 inch spindle, giving you everything needed to service one wheel hub in a single package. Rather than sourcing cones, cups, a seal, and hardware separately, this kit bundles the matched components so the bearing race and cone are properly paired from the factory, which is critical for correct bearing preload and long service life.\u003c\/p\u003e\u003cp\u003eEach kit includes two bearing cones, two bearing cups, a grease seal, a cotter pin, and a dust cap, covering both the inner and outer bearing positions on the hub. This makes it suited for routine bearing repacking, hub rebuilds, or replacing worn or damaged bearings on trailer axles that use this spindle diameter. The included dust cap keeps water and debris out of the repacked hub after installation, and the cotter pin secures the spindle nut per standard trailer hub assembly practice.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-G02-53\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wheel Bearing Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Size:\u003c\/strong\u003e 1-3\/8 inches x 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 bearing cones, 2 bearing cups, 1 grease seal, 1 cotter pin, 1 dust cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983010318\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size spindle does the Dexter K71-G02-53 bearing kit fit?\u003c\/strong\u003e The K71-G02-53 kit is sized for a 1-3\/8 inch x 1-1\/16 inch trailer spindle, matching the inner and outer bearing bore diameters at those two dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K71-G02-53 kit?\u003c\/strong\u003e This Dexter kit includes 2 bearing cones, 2 bearing cups, 1 grease seal, 1 cotter pin, and 1 dust cap, enough to service one complete wheel hub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include the dust cap?\u003c\/strong\u003e Yes, a dust cap is included with the K71-G02-53 kit along with the cones, cups, seal, and cotter pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K71-G02-53 bearing kit weigh?\u003c\/strong\u003e The Dexter K71-G02-53 bearing kit weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a kit for one hub or a pair?\u003c\/strong\u003e The K71-G02-53 is a single-hub kit, containing the cones, cups, seal, cotter pin, and dust cap needed for one wheel bearing assembly; a second kit is needed for the other side of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearing cups and cones pre-matched?\u003c\/strong\u003e Yes, the cones and cups in the K71-G02-53 kit are matched sets, which is important for correct bearing fit and preload rather than mixing bearings from different sources.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bearing kit used for?\u003c\/strong\u003e The K71-G02-53 is used for repacking or rebuilding a trailer wheel hub, replacing worn bearings, a damaged seal, or a lost dust cap on axles with a 1-3\/8 inch x 1-1\/16 inch spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cotter pin included, or do I need to buy one separately?\u003c\/strong\u003e A cotter pin is included in the K71-G02-53 kit, so no separate hardware purchase is needed for that step of the reassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, K71-G02-53 is the Dexter manufacturer part number for this bearing kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work if my hub uses a different spindle size?\u003c\/strong\u003e No, the K71-G02-53 kit is specific to a 1-3\/8 inch x 1-1\/16 inch spindle; a hub with a different bearing bore size requires a different kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991266635995,"sku":"DEX-K71-G02-53","price":25.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81yqyRcX77L.jpg?v=1784498813"},{"product_id":"ce-smith-trailer-hub-kit-13110-1-inch-spindle-4-lug-x-4-inch-bolt-circle-1250-lb-capacity","title":"CE Smith Trailer Hub Kit 13110 - 1 Inch Spindle, 4 Lug x 4 Inch Bolt Circle, 1250 lb Capacity","description":"\u003cp\u003eThe CE Smith 13110 Trailer Hub Kit is a preassembled, pregreased hub and bearing unit built for boat trailer axles with a 1 inch straight spindle. It is designed for a 1250 pound capacity and uses a four stud, 4 inch bolt circle diameter pattern, making it a common fit for standard single-axle boat trailers that use this bolt pattern and spindle size. The hub is constructed from alloy steel for durability under repeated launch and retrieval cycles, road vibration, and exposure to water and road salt.\u003c\/p\u003e\u003cp\u003eBecause the kit ships fully assembled with pregreased bearings already installed, it is intended to simplify trailer maintenance: instead of packing individual bearings, races, seals, and dust caps separately, the whole hub goes on the axle as one unit. The hub has a 1.98 inch inner diameter to fit correctly onto a 1 inch spindle axle, a 5-9\/16 inch wheel flange diameter, and supports wheels up to 12 inches in maximum size. The kit includes a carry case, dust cap, cotter pin, and lug nuts, so the components needed to complete the installation are included rather than sold separately.\u003c\/p\u003e\u003cp\u003eThis hub kit is intended for buyers replacing a worn, damaged, or leaking hub and bearing assembly on a boat trailer, or for those upgrading to a preassembled unit to reduce maintenance time. It suits standard trailers using a 1 inch spindle and 4 lug x 4 inch bolt pattern rated to 1250 pounds capacity.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CE Smith\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hub Kit 1 Inch - 4 Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Hubs and Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1250 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Size:\u003c\/strong\u003e 1 inch straight spindle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 4 studs x 4 inch bolt circle diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Inner Diameter:\u003c\/strong\u003e 1.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Flange Diameter:\u003c\/strong\u003e 5-9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wheel Size:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Thickness:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Roller bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9.9 x 8.2 x 4.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.11875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Hub kit, carry case, dust cap, cotter pin, lug nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits standard boat trailers using a 1 inch straight spindle with a 4 stud, 4 inch bolt circle diameter, rated to a 1250 pound capacity.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat spindle size does the CE Smith 13110 hub kit fit?\u003c\/strong\u003e The CE Smith 13110 is built for a 1 inch straight spindle, with a hub inner diameter of 1.98 inches sized to fit onto that spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this hub kit support?\u003c\/strong\u003e It is rated for a 1250 pound capacity, making the 13110 suitable for standard single-axle boat trailers within that load range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CE Smith 13110 come with bearings already installed?\u003c\/strong\u003e Yes, the hub kit is preassembled with pregreased bearings, so it installs onto the trailer axle as a complete unit rather than requiring separate bearing packing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does this hub use?\u003c\/strong\u003e The 13110 uses a 4 stud pattern on a 4 inch bolt circle diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum wheel size this hub will accept?\u003c\/strong\u003e The hub supports wheels up to 12 inches in maximum size, with a wheel flange diameter of 5-9\/16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CE Smith 13110 hub kit made from?\u003c\/strong\u003e It is made from alloy steel, chosen for strength and durability under repeated trailer use and exposure to water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 13110?\u003c\/strong\u003e The kit includes the assembled hub, a carry case, dust cap, cotter pin, and lug nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CE Smith 13110 hub kit weigh?\u003c\/strong\u003e The 13110 hub kit weighs 7.11875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this hub kit?\u003c\/strong\u003e The hub kit measures 9.9 x 8.2 x 4.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit a direct replacement for a worn or damaged trailer hub?\u003c\/strong\u003e Yes, the CE Smith 13110 is designed as a complete preassembled replacement hub for boat trailers using a 1 inch spindle and 4 lug x 4 inch bolt pattern rated to 1250 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing type does the 13110 use?\u003c\/strong\u003e It uses a roller bearing design and is compatible with standard grease lubrication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any assembly required before installing the 13110 on a trailer axle?\u003c\/strong\u003e No, the hub kit ships fully assembled and pregreased, so it can be installed directly onto the axle without separately packing or fitting the bearings.\u003c\/p\u003e","brand":"CE Smith","offers":[{"title":"Default Title","offer_id":49027473113307,"sku":"CES-13110","price":58.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7176s-H4VsL_5224cb5a-e421-4a54-bfe6-74665721c3d2.jpg?v=1785330977"},{"product_id":"ce-smith-trailer-hub-kit-13210-1-inch-bore-5-lug-pattern","title":"CE Smith Trailer Hub Kit 13210, 1 Inch Bore, 5-Lug Pattern","description":"\u003cp\u003eThe CE Smith 13210 is a trailer hub kit built for trailer wheels using a 1 inch axle bore and a 5-lug bolt pattern. It is supplied as a complete hub kit rather than individual loose components, so it is intended to be installed as the wheel hub assembly on a compatible trailer axle. The 1 inch bore diameter must match the spindle diameter of the trailer axle it is installed on, and the 5-lug pattern must match the wheel being mounted. This hub kit falls under the Trailer Hubs \u0026amp; Bearings category and is suited to boat trailers and other utility trailers that use a 1 inch, 5-lug hub configuration. The unit weighs 7.84375 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CE Smith\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Hubs \u0026amp; Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5-Lug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.84375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 768296002824\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat bore size does the CE Smith 13210 hub kit have?\u003c\/strong\u003e The CE Smith Hub Kit 13210 has a 1 inch bore diameter, so it is intended for trailer axles with a 1 inch spindle diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lug bolts does the CE Smith 13210 hub kit use?\u003c\/strong\u003e It uses a 5-lug bolt pattern, matching wheels drilled for 5 lugs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CE Smith 13210 hub kit weigh?\u003c\/strong\u003e The CE Smith 13210 hub kit weighs 7.84375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the CE Smith 13210 hub kit?\u003c\/strong\u003e The UPC for this CE Smith hub kit is 768296002824.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of product is the CE Smith 13210?\u003c\/strong\u003e The 13210 is a complete trailer hub kit, listed under the Trailer Hubs \u0026amp; Bearings category, built with a 1 inch bore and a 5-lug bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CE Smith 13210 fit a trailer wheel with a 6-lug pattern?\u003c\/strong\u003e No, the CE Smith 13210 is built specifically for a 5-lug bolt pattern and will not match a 6-lug wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CE Smith 13210 sold as a complete kit or individual parts?\u003c\/strong\u003e It is sold as a complete hub kit rather than individual loose components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CE Smith 13210 bore size need to match my axle exactly?\u003c\/strong\u003e Yes, since this kit is manufactured with a 1 inch bore, your trailer axle spindle should measure 1 inch for proper fit before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailers is the CE Smith 13210 hub kit suited for?\u003c\/strong\u003e With its 1 inch bore and 5-lug pattern, the CE Smith 13210 is suited to boat trailers and other utility trailers built around that same hub configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CE Smith 13210 part number the correct way to order this hub kit?\u003c\/strong\u003e Yes, part number 13210 is the CE Smith identifier for this specific 1 inch bore, 5-lug hub kit.\u003c\/p\u003e","brand":"CE Smith","offers":[{"title":"Default Title","offer_id":49027473178843,"sku":"CES-13210","price":59.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_7626a6bd-605e-453f-9fd9-ad89f27b1919.jpg?v=1785350141"},{"product_id":"ce-smith-1-inch-trailer-hub-kit-galvanized-5-x-4-5-inch-bolt-pattern-1250-lb-capacity-13215","title":"CE Smith 1 Inch Trailer Hub Kit, Galvanized, 5 x 4.5 Inch Bolt Pattern, 1250 lb Capacity (13215)","description":"\u003cp\u003eThe CE Smith 1 Inch Trailer Hub Kit (13215) is a complete, pre-assembled boat trailer hub built to bolt onto a 1 inch straight shaft axle with a minimum of mess or fuss. The bearings arrive pre-greased and installed, so the hub goes onto the axle ready for service rather than requiring separate bearing packing before mounting. Construction is galvanized to resist the corrosion that saltwater and boat-launch environments cause on unprotected steel, making this kit suited to marine trailer use over the long term.\u003c\/p\u003e\u003cp\u003eThe hub uses a 5 stud x 4.5 inch bolt circle diameter and a 1.98 inch hub inner diameter, and is rated for a 1250 pound load capacity with a 12 inch maximum wheel size, matching it to small to mid-size boat trailer wheel assemblies. Each kit ships complete with everything needed to finish the installation: a carry case for the included small parts, a dust cap to keep contaminants out of the hub, a cotter pin, and lug nuts. Because the hub arrives with bearings already installed, the buyer is not left sourcing separate bearing sets or races to complete the job.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CE Smith\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13215\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5 stud x 4.5 inch bolt circle diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 1 inch straight shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1250 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wheel Size:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Inner Diameter:\u003c\/strong\u003e 1.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Flange Diameter:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carry case, dust cap, cotter pin, and lug nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9.8 x 8.2 x 4.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e One year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 768296009892\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size axle shaft does the CE Smith 13215 hub kit fit?\u003c\/strong\u003e The CE Smith 13215 is built for a 1 inch straight shaft axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bolt pattern on this trailer hub kit?\u003c\/strong\u003e The CE Smith 13215 hub uses a 5 stud x 4.5 inch bolt circle diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the CE Smith 13215 hub kit carry?\u003c\/strong\u003e It is rated for a 1250 pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the bearings need to be greased before installation?\u003c\/strong\u003e No, the CE Smith 13215 Trailer Hub Kit ships with pre-greased bearings already installed, so it mounts directly onto the axle without a separate packing step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this hub kit?\u003c\/strong\u003e The kit includes the hub with pre-greased bearings, a carry case, a dust cap, a cotter pin, and lug nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CE Smith 13215 hub made from?\u003c\/strong\u003e It is made of galvanized steel, which resists corrosion in marine and boat-launch environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum wheel size for this hub?\u003c\/strong\u003e The CE Smith 13215 supports up to a 12 inch maximum wheel size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub inner diameter on the 13215 kit?\u003c\/strong\u003e The hub inner diameter is 1.98 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CE Smith 13215 Trailer Hub Kit weigh?\u003c\/strong\u003e It weighs 6.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the CE Smith 13215 hub kit?\u003c\/strong\u003e Yes, it is covered by a one year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the CE Smith 13215 hub kit?\u003c\/strong\u003e The kit measures 9.8 x 8.2 x 4.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CE Smith 13215 hub kit different from CE Smith's 1-1\/16 inch or 1-3\/8 inch hub kits?\u003c\/strong\u003e Yes, the 13215 is sized for a 1 inch straight shaft with a 1250 pound capacity, while CE Smith's other hub kits are built for larger 1-1\/16 inch and 1-3\/8 inch tapered shafts with higher load capacities.\u003c\/p\u003e","brand":"CE Smith","offers":[{"title":"Default Title","offer_id":49027473211611,"sku":"CES-13215","price":62.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/13215__32109.1722514620.500.750.jpg?v=1785163500"},{"product_id":"ce-smith-trailer-hub-kit-1-1-16-inch-stud-5-x-4-1-2-inch-bolt-pattern-13311","title":"CE Smith Trailer Hub Kit, 1-1\/16 Inch Stud, 5 x 4-1\/2 Inch Bolt Pattern, 13311","description":"\u003cp\u003eThe CE Smith 13311 Trailer Hub Kit is a complete, pre-greased hub assembly built for trailer owners who need a fast, clean replacement without sourcing bearings and seals separately. The kit is designed for a 1-1\/16 inch stud diameter and a 5 x 4-1\/2 inch bolt pattern, and it supports a load capacity of up to 1,350 pounds. The hub body is cast iron for long-term durability under road vibration and towing loads, and the kit arrives pre-greased so the bearings are ready to install without a separate packing step.\u003c\/p\u003e\u003cp\u003eAlong with the hub itself, the kit includes the bearings, seals, dust cap, cotter pin, and wheel nuts needed to complete the installation, plus an instruction manual for reference during the swap. This makes it a practical option for routine maintenance or replacing a worn, corroded, or damaged hub on a boat, utility, or cargo trailer that uses this stud and bolt pattern configuration. Because the components are matched and pre-assembled, installation is straightforward for anyone comfortable with basic trailer wheel-end maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CE Smith\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13311\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1-1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5 x 4-1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.12 x 7.12 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1,350 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricant:\u003c\/strong\u003e Grease, pre-greased at assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Hub assembly, bearings, seals, dust cap, cotter pin, wheel nuts, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size and bolt pattern does the CE Smith 13311 hub kit fit?\u003c\/strong\u003e The CE Smith 13311 hub kit is built for a 1-1\/16 inch stud diameter with a 5 x 4-1\/2 inch bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of this hub kit?\u003c\/strong\u003e The 13311 hub kit supports a load capacity of up to 1,350 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hub come pre-greased?\u003c\/strong\u003e Yes, the CE Smith 13311 hub arrives pre-greased so the bearings are ready for installation without a separate packing step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 13311 hub kit?\u003c\/strong\u003e The kit includes the hub assembly, bearings, seals, a dust cap, cotter pin, wheel nuts, and an instruction manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub made of?\u003c\/strong\u003e The hub body on the CE Smith 13311 kit is cast iron, chosen for durability under towing loads and road vibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the hub kit?\u003c\/strong\u003e The CE Smith 13311 measures 7.12 x 7.12 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the hub kit weigh?\u003c\/strong\u003e The CE Smith 13311 hub kit weighs 7.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full hub replacement or just bearings?\u003c\/strong\u003e It is a complete hub kit, not just a bearing set, since the 13311 includes the full pre-greased hub assembly along with bearings, seals, dust cap, cotter pin, and wheel nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of lubricant is used in the hub kit?\u003c\/strong\u003e The CE Smith 13311 hub is packed with grease and arrives pre-greased from the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trailers is this hub kit designed for?\u003c\/strong\u003e The 13311 is designed for trailers using a 1-1\/16 inch stud with a 5 x 4-1\/2 inch bolt pattern, such as boat, utility, and cargo trailers with this wheel-end configuration.\u003c\/p\u003e","brand":"CE Smith","offers":[{"title":"Default Title","offer_id":49027473244379,"sku":"CES-13311","price":65.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51tsXdA6c9L.jpg?v=1785330979"},{"product_id":"ce-smith-1-1-16-inch-trailer-hub-kit-5-stud-x-4-5-inch-bolt-circle-1350-lb-capacity-galvanized","title":"CE Smith 1-1\/16 Inch Trailer Hub Kit, 5-Stud x 4.5 Inch Bolt Circle, 1350 lb Capacity, Galvanized","description":"\u003cp\u003eThe CE Smith 1-1\/16 inch Trailer Hub Kit is a complete, pre-assembled hub replacement built for boat, fishing, and utility trailers using a 1-1\/16 inch straight shaft axle. The hub arrives fully assembled with pre-greased bearings already installed, which cuts down on the mess of manual bearing packing and speeds up final installation onto the axle. Galvanized construction throughout resists corrosion in the wet, salt-exposed conditions common to marine trailer use, making it a durable choice for repeated boat launching and towing.\u003c\/p\u003e\u003cp\u003eThis kit is built around a 5-stud pattern on a 4.5 inch bolt circle diameter, with a 1.98 inch hub inner diameter and a 5-1\/2 inch wheel flange diameter, and it is rated for a 1350 pound load capacity with a maximum wheel size of 14 inches. It ships as a complete hardware kit rather than a bare hub: a carry case, dust cap, cotter pin, and lug nuts are all included, so everything needed to mount the hub is in the box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CE Smith\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Count:\u003c\/strong\u003e 5 studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Circle Diameter:\u003c\/strong\u003e 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Type:\u003c\/strong\u003e 1-1\/16 inch straight shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1350 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wheel Size:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Inner Diameter:\u003c\/strong\u003e 1.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Flange Diameter:\u003c\/strong\u003e 5-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 768296009908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carry case, dust cap, cotter pin, lug nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat shaft size does the CE Smith 13315 trailer hub kit fit?\u003c\/strong\u003e The CE Smith 13315 is built for a 1-1\/16 inch straight shaft axle, with a 5-stud pattern on a 4.5 inch bolt circle diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this hub kit carry?\u003c\/strong\u003e This CE Smith trailer hub kit is rated for a 1350 pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bearings already packed with grease?\u003c\/strong\u003e Yes, the CE Smith 13315 hub kit comes fully assembled with pre-greased bearings, so there is no manual bearing packing needed before installation onto the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 13315 hub kit?\u003c\/strong\u003e The kit includes the hub itself along with a carry case, dust cap, cotter pin, and lug nuts, covering the hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum wheel size this hub supports?\u003c\/strong\u003e The CE Smith 1-1\/16 inch trailer hub kit supports a maximum wheel size of 14 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub kit made from?\u003c\/strong\u003e This hub kit is made of galvanized steel, chosen for durability in marine and boat trailer environments exposed to water and salt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub inner diameter and wheel flange diameter on part 13315?\u003c\/strong\u003e Part 13315 has a 1.98 inch hub inner diameter and a 5-1\/2 inch wheel flange diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CE Smith 13315 fit a different shaft size than other CE Smith hub kits?\u003c\/strong\u003e Yes, the 13315 is specifically sized for a 1-1\/16 inch straight shaft; CE Smith offers other hub kit part numbers for different shaft sizes such as 1 inch or tapered shafts, so confirm your axle's shaft diameter before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete hub assembly or just a bearing kit?\u003c\/strong\u003e The CE Smith 13315 is a complete pre-assembled hub kit with pre-greased bearings, not just a standalone bearing set, and it installs directly onto the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does this trailer hub use?\u003c\/strong\u003e This CE Smith hub kit uses a 5-stud pattern on a 4.5 inch bolt circle diameter.\u003c\/p\u003e","brand":"CE Smith","offers":[{"title":"Default Title","offer_id":49027473277147,"sku":"CES-13315","price":68.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/13315__08037.1722478450.500.750.jpg?v=1785163506"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/13515__95160.1739476144.500.750.jpg?v=1785357568","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trailering-trailer-hubs-bearings-axles.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}