{"title":"Trailering","description":null,"products":[{"product_id":"trailering-clips-for-volvo-penta-omc-cobra-stern-drives-replaces-oem-174448-stainless-steel-set-of-2-sierra-18-9098","title":"Sierra 18-9098 Trailering Clips, Replaces 174448, Set of 2, Fits SX Stern Drive Models thru 2006","description":"\u003cp\u003eThe Sierra 18-9098 Trailering Clips are a set of two clips designed to secure and support the outdrive unit while a boat is being trailered, helping prevent stress and movement of the drive during transport. They are built as a direct replacement for OEM part 174448 and are designed to fit all SX stern drive models through 2006.\u003c\/p\u003e\u003cp\u003eMade from stainless steel for corrosion resistance in the marine environment, these clips are engineered to meet or exceed original equipment quality, giving boat owners a reliable way to keep the drive properly supported on the trailer without relying on a worn or missing original clip. Each order includes a complete set of two clips, matching the original equipment quantity so both sides of the application are covered.\u003c\/p\u003e\u003cp\u003eThese trailering clips are a straightforward maintenance item for owners of SX-equipped boats who need to replace cracked, corroded, or missing factory clips. Because they are sold as a matched pair, they simplify reordering versus sourcing individual clips separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9098\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trailering Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Set of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 13.5 x 3.8 x 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.98 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e All SX Models thru 2006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAll SX stern drive models thru 2006\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e174448\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-9098 Trailering Clip do?\u003c\/strong\u003e It secures and supports the outdrive unit while the boat is being towed on a trailer, part of a set of two clips that replace the original equipment support clips on SX stern drive models thru 2006.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9098 a direct replacement for OEM part 174448?\u003c\/strong\u003e Yes, the 18-9098 Trailering Clip set is manufactured to replace OEM part number 174448 and is built to meet or exceed the quality of the original equipment clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clips come in the Sierra 18-9098 set?\u003c\/strong\u003e The 18-9098 is sold as a set of two trailering clips, matching the original equipment quantity so both are replaced together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-9098 clip made of?\u003c\/strong\u003e Stainless steel, chosen for its resistance to corrosion in marine and trailering environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich stern drive models does the 18-9098 Trailering Clip fit?\u003c\/strong\u003e It is designed for all SX stern drive models thru 2006.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-9098 Trailering Clip set?\u003c\/strong\u003e The set measures 13.5 x 3.8 x 1.6 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-9098 Trailering Clip set weigh?\u003c\/strong\u003e The set weighs 0.98 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-9098 clip genuine OEM or aftermarket?\u003c\/strong\u003e It is an aftermarket replacement part manufactured by Sierra to meet or exceed original equipment quality, cross-referencing OEM part 174448.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-9098 clip work on a 2007 or newer SX-A drive?\u003c\/strong\u003e No; the 18-9098 is designed for SX models thru 2006. Newer Volvo SX-A and DPS-A drives (2007-Up) use a different trailering clip part number, so the model year and drive designation should be confirmed before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace both trailering clips at once?\u003c\/strong\u003e The 18-9098 is sold as a matched set of two clips, so both are replaced together as a pair rather than individually.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436136155,"sku":"SIE-18-9098","price":26.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-9098_lg__49806.1558133876.500.750.jpg?v=1785188522"},{"product_id":"sierra-18-9099-trailering-clips-pair-replaces-oem-817019a1-fits-mercruiser-alpha-one-alpha-gen-ii-bravo-i-ii-iii-blackhawk","title":"Sierra Trailering Clips 18-9099, Replaces 817019A1, Fits Alpha One, Alpha Generation II, Bravo I\/II\/III and Blackhawk","description":"\u003cp\u003eThe Sierra Trailering Clips, part number 18-9099, are replacement clips used to secure the outdrive of a Mercury Marine sterndrive during trailering. Sold as a pair, each clip has an inside diameter of 3\/4 inch and a length of 11 1\/8 inches, sized to fit the trailering clip application on Alpha One, Alpha Generation II, Bravo I, Bravo II, Bravo III, and Blackhawk drives. These clips are a direct cross-reference to a wide range of Mercury Marine OEM part numbers, making it easy to find the correct replacement using whichever number is printed on the old clip or listed in service documentation. Trailering clips are a wear item that should be inspected and replaced when worn, bent, or corroded, since a failed clip can allow the outdrive to shift on the trailer during transport. Package 18-9099 includes 2 clips (one pair), which is the quantity needed for a single trailering application. Sierra part 18-9099 weighs 1.26 pounds as packaged.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9099\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailering Clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 (pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 11 1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Alpha One, Alpha Generation II, Bravo I, Bravo II, Bravo III, Blackhawk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282378134\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 817019A1, 817019Q2, 817019A2, 879078, 86459A2, 86459A1, 86459, 41155A2, 41155A1, 32657A4, 32657A3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAlpha One\u003c\/li\u003e\n\u003cli\u003eAlpha Generation II\u003c\/li\u003e\n\u003cli\u003eBravo I\u003c\/li\u003e\n\u003cli\u003eBravo II\u003c\/li\u003e\n\u003cli\u003eBravo III\u003c\/li\u003e\n\u003cli\u003eBlackhawk\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e817019A1\u003c\/li\u003e\n\u003cli\u003e817019Q2\u003c\/li\u003e\n\u003cli\u003e817019A2\u003c\/li\u003e\n\u003cli\u003e879078\u003c\/li\u003e\n\u003cli\u003e86459A2\u003c\/li\u003e\n\u003cli\u003e86459A1\u003c\/li\u003e\n\u003cli\u003e86459\u003c\/li\u003e\n\u003cli\u003e41155A2\u003c\/li\u003e\n\u003cli\u003e41155A1\u003c\/li\u003e\n\u003cli\u003e32657A4\u003c\/li\u003e\n\u003cli\u003e32657A3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sierra part 18-9099 used for?\u003c\/strong\u003e Sierra 18-9099 is a pair of trailering clips used to secure a Mercury Marine sterndrive outdrive while the boat is being trailered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clips come in the 18-9099 package?\u003c\/strong\u003e The 18-9099 package includes 2 trailering clips (one pair), which is the full set needed for a single application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 18-9099 fit an Alpha One outdrive?\u003c\/strong\u003e Yes, Sierra trailering clip 18-9099 fits Alpha One, Alpha Generation II, Bravo I, Bravo II, Bravo III, and Blackhawk drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-9099 fit Bravo III drives?\u003c\/strong\u003e Bravo III is covered by Sierra 18-9099, along with Bravo I, Bravo II, Alpha One, Alpha Generation II, and Blackhawk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-9099 trailering clip?\u003c\/strong\u003e Each clip has an inside diameter of 3\/4 inch and a length of 11 1\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does 18-9099 replace?\u003c\/strong\u003e Sierra 18-9099 cross-references to OEM numbers 817019A1, 817019Q2, 817019A2, 879078, 86459A2, 86459A1, 86459, 41155A2, 41155A1, 32657A4, and 32657A3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 817019A1 the same part as Sierra 18-9099?\u003c\/strong\u003e 817019A1 is one of the OEM numbers that Sierra 18-9099 directly replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-9099 trailering clip set weigh?\u003c\/strong\u003e The 18-9099 pair of trailering clips weighs 1.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should trailering clips be replaced?\u003c\/strong\u003e Trailering clips like the Sierra 18-9099 should be replaced when they are worn, bent, or corroded, since a failed clip can let the outdrive shift on the trailer during transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-9099 fit a Blackhawk drive?\u003c\/strong\u003e Yes, the Blackhawk drive is included in the fitment for Sierra trailering clip 18-9099, alongside the Alpha and Bravo drive families listed for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9099 sold individually or as a pair?\u003c\/strong\u003e Sierra 18-9099 is sold as a pair (package of 2), which is the quantity needed for one trailering clip installation.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436168923,"sku":"SIE-18-9099","price":33.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-9099_lg__16600.1729086707.500.750.jpg?v=1785188669"},{"product_id":"sierra-18-9096-trailering-clips-for-volvo-penta-sx-a-dps-a-2007-up-replaces-volvo-3847547-set-of-2-white","title":"Sierra 18-9096 Trailering Clips, Set of 2 - Replaces Volvo Penta 3847547 - Fits SX-A, DPS-A 2007-Up","description":"\u003cp\u003eThe Sierra 18-9096 Trailering Clip set secures Volvo Penta SX-A and DPS-A stern drives in the trailered (up) position, keeping the outdrive from dropping down while the boat is being towed or stored on a trailer. This is an interchange part for Volvo Penta 3847547 and is built to meet or exceed the fit and function of the original equipment clip it replaces.\u003c\/p\u003e\u003cp\u003eEach set includes two plastic trailering clips finished in white, with a hex-head, clip-on design that mounts to the drive unit. Each clip measures 7-1\/4 inch in length, and the retail package measures 13.5 x 3.8 x 1.6 inches. This is a purpose-built replacement, not a universal clamp, so confirming the drive model before ordering matters.\u003c\/p\u003e\u003cp\u003eThe 18-9096 clip set is designed specifically for Volvo Penta SX-A and DPS-A stern drives built 2007 and newer. It is not intended for 2006-and-earlier Volvo SX drives; using it on an older drive can damage the clip. Boat owners replacing worn, cracked, or missing trailering clips, or rigging a drive for the first time, can use this set as a direct fit for the applicable Volvo Penta drives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9096\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trailering Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Quantity:\u003c\/strong\u003e 2 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drives:\u003c\/strong\u003e Volvo Penta SX-A, DPS-A (2007-Up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Volvo 3847547\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Clip-on, hex head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length:\u003c\/strong\u003e 7-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 13.5 x 3.8 x 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282227111\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolvo Penta SX-A, DPS-A (2007-Up)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eVolvo 3847547\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-9096 trailering clip do?\u003c\/strong\u003e It holds a Volvo Penta SX-A or DPS-A stern drive up in the trailered position so the outdrive does not drop down while the boat is being towed or stored, and it comes as a set of 2 clips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-9096 clip fit an older Volvo SX drive from 2005 or 2006?\u003c\/strong\u003e No. The 18-9096 set is designed only for Volvo Penta SX-A and DPS-A drives from 2007 and newer; using it on a 2006-or-earlier drive is not correct and can damage the clip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-9096 a direct replacement for the OEM Volvo Penta part?\u003c\/strong\u003e Yes, 18-9096 is a direct interchange for Volvo Penta OEM part 3847547 and is built to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many clips come in the 18-9096 package?\u003c\/strong\u003e The package is a set of 2 trailering clips, which is the quantity needed for a Volvo Penta SX-A or DPS-A drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the 18-9096 trailering clips made from?\u003c\/strong\u003e The clips are made of plastic with a white finish and use a clip-on, hex-head fastener design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-9096 trailering clip?\u003c\/strong\u003e Each individual clip is 7-1\/4 inch long, and the retail package measures 13.5 x 3.8 x 1.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-9096 trailering clip set weigh?\u003c\/strong\u003e The set weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drive models is the 18-9096 clip designed for?\u003c\/strong\u003e It is designed for Volvo Penta SX-A and DPS-A stern drives, specifically the 2007-and-newer versions of those drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-9096 clip color-specific or does it need painting?\u003c\/strong\u003e The 18-9096 clip is supplied finished in white and does not require additional painting for use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan 18-9096 be installed without removing the drive unit?\u003c\/strong\u003e The clip is a clip-on style fastener that attaches to the Volvo Penta SX-A\/DPS-A drive unit; no additional detail beyond its clip-on, hex-head design is specified for this part.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988436201691,"sku":"SIE-18-9096","price":33.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-9096_lg__68218.1558133835.500.750.jpg?v=1785188812"},{"product_id":"sea-dog-751030-1-two-piece-coupler-lock-brass-plated-zinc-includes-2-keys-fits-most-trailer-couplers","title":"Sea-Dog 751030-1 Two-Piece Trailer Coupler Lock, Brass Plated Zinc","description":"\u003cp\u003eThe Sea-Dog 751030-1 Two-Piece Coupler Lock is built for theft deterrence on a boat or utility trailer, adding a level of security that also prevents accidental uncoupling while in transit. The two-piece design gives better access in hard-to-reach places compared to a single-body lock, making it easier to fit and remove even in tight mounting locations. It fits most coupler sizes and comes with two keys so a spare is always on hand. The lock body is constructed of corrosion resistant brass plated zinc, giving it durability for outdoor and marine trailer use where exposure to moisture and road grime is constant.\u003c\/p\u003e\u003cp\u003eBeyond theft prevention, this coupler lock provides peace of mind during towing by helping keep the coupler securely engaged, reducing the risk of the trailer separating from the tow vehicle unintentionally. Its compact dimensions allow it to work with common coupler configurations without adding excessive bulk.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 751030-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass Plated Zinc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-Piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two Keys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension A:\u003c\/strong\u003e 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension B:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514751063\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Locks and Accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sea-Dog 751030-1 used for?\u003c\/strong\u003e It is a two-piece coupler lock designed for theft deterrence on a trailer coupler, while also adding a level of security that helps prevent accidental uncoupling while in transit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many keys come with the 751030-1 coupler lock?\u003c\/strong\u003e Two keys are included with the Sea-Dog 751030-1, so you have a spare on hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the coupler lock made of?\u003c\/strong\u003e The Sea-Dog 751030-1 is constructed of corrosion resistant brass plated zinc, which holds up well to outdoor and marine trailer exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lock fit my trailer coupler?\u003c\/strong\u003e The 751030-1 fits most coupler sizes thanks to its two-piece design, which also gives better access in hard-to-reach mounting spots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the two-piece design an advantage over a one-piece coupler lock?\u003c\/strong\u003e Splitting the lock into two pieces makes it easier to install and access in tight or hard-to-reach areas around the coupler compared to a single solid-body lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sea-Dog 751030-1?\u003c\/strong\u003e The lock measures 1-11\/16 inches (A), 1-13\/16 inches (B), 3\/4 inch (C), and 9\/16 inch (D) across its key mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 751030-1 coupler lock weigh?\u003c\/strong\u003e The Sea-Dog 751030-1 weighs 0.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 751030-1 rust resistant?\u003c\/strong\u003e Yes, its brass plated zinc construction is corrosion resistant, making it suitable for boat trailer and marine towing environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the coupler lock help prevent accidental uncoupling?\u003c\/strong\u003e Yes, in addition to theft deterrence, the Sea-Dog 751030-1 adds security that helps prevent the coupler from accidentally releasing while towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sea-Dog 751030-1 coupler lock?\u003c\/strong\u003e The UPC for the Sea-Dog 751030-1 Two-Piece Coupler Lock is 035514751063.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988828303579,"sku":"S-D-751030-1","price":10.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/7186.jpg?v=1784429968"},{"product_id":"sea-dog-751010-1-square-trailer-coupler-locking-pin-1-4-in-electro-galvanized-steel","title":"Sea-Dog Coupler Pin 751010-1, 1\/4 Inch Square Trailer Coupler Locking Pin, Electro-Galvanized Steel","description":"\u003cp\u003eThe Sea-Dog 751010-1 is a square coupler locking pin built to secure your trailer coupler and prevent accidental uncoupling while in transit. Constructed of electro-galvanized steel, it resists corrosion from road spray, launch ramps, and general outdoor exposure, making it well suited to boat trailers and other towed equipment stored near water. The pin uses a snap lock bale that is spring tensioned, giving it stronger holding power than a simple friction-fit pin so it stays seated over rough roads and repeated hitching cycles.\u003c\/p\u003e\u003cp\u003eSized at 1\/4 inch, the 751010-1 is designed to fit most coupler sizes, making it a straightforward upgrade or replacement for a worn, bent, or missing coupler pin. It ships as a single pin and is a simple, tool-free installation: insert the pin through the coupler latch and snap the spring-loaded bale closed to lock it in place. Because it is sold individually, it is easy to keep a spare on hand or to replace just the one pin that has failed rather than an entire coupler lock assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sea-Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 751010-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Electro-Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Diameter (A):\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (B):\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension C:\u003c\/strong\u003e 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension D:\u003c\/strong\u003e 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension E:\u003c\/strong\u003e 13\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.106 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 035514751025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00035514751025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack:\u003c\/strong\u003e 10 each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Fitment:\u003c\/strong\u003e Fits most coupler sizes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most trailer coupler sizes at the 1\/4 inch pin size; no specific make, model, or year fitment is specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sea-Dog 751010-1 coupler pin?\u003c\/strong\u003e The Sea-Dog 751010-1 is a 1\/4 inch square coupler locking pin, with an overall length of 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 751010-1 pin made of?\u003c\/strong\u003e It is made of electro-galvanized steel, which provides corrosion resistance for outdoor and marine trailer use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pin fit my trailer coupler?\u003c\/strong\u003e The 751010-1 is designed to fit most coupler sizes at the 1\/4 inch pin diameter; check your coupler's latch opening against the 1\/4 inch pin size before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the locking mechanism work?\u003c\/strong\u003e A spring-tensioned snap lock bale holds the 751010-1 pin in place once inserted, giving it stronger holding power than a plain friction pin and helping prevent accidental uncoupling in transit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pins come in a package?\u003c\/strong\u003e The Sea-Dog 751010-1 is sold as a single coupler pin, one piece per unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 751010-1 weigh?\u003c\/strong\u003e The pin weighs 0.106 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation tool-free?\u003c\/strong\u003e Yes, installation is tool-free: insert the pin through the coupler latch and snap the spring-loaded bale closed to lock it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger size available?\u003c\/strong\u003e Sea-Dog offers a related coupler pin, part number 751011-1, at 5\/16 inch, which is a separate SKU from the 1\/4 inch 751010-1 pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Sea-Dog 751010-1 coupler pin is 035514751025.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pin resist rust?\u003c\/strong\u003e Yes, the electro-galvanized steel construction of the 751010-1 is built to resist corrosion in wet and outdoor trailering conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does dimension C, D, and E refer to on this pin?\u003c\/strong\u003e For the 751010-1, dimension C measures 1-13\/16 inches, dimension D measures 7\/16 inch, and dimension E measures 13\/16 inch, describing the pin's additional body and bale dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this pin as a replacement for a lost or broken coupler pin?\u003c\/strong\u003e Yes, the 751010-1 is intended as a direct replacement coupler pin for coupler locks that use a 1\/4 inch square pin.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":48988828565723,"sku":"S-D-751010-1","price":3.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5418.jpg?v=1784429976"},{"product_id":"attwood-11195-4-dual-drive-trailer-winch-2-000-lb-capacity-4-1-1-gear-ratio-includes-2-in-x-20-ft-strap","title":"Attwood Dual Drive Trailer Winch 11195-4, 2,000 Pound Capacity, 4.1:1 Gear Ratio","description":"\u003cp\u003eThe Attwood 11195-4 is a dual drive trailer winch built to load and secure boats up to 2,000 pounds. The dual drive design distributes pulling load equally across two sets of gears, which eliminates frame torque and gives a smoother, more controlled crank compared to single-drive winches. With a 4.1:1 gear ratio, the winch multiplies hand-crank effort so loading heavier boats stays manageable, and general trailer-winch practice allows use on boats up to roughly twice the rated capacity when winching onto a trailer (rather than lifting).\u003c\/p\u003e\u003cp\u003eA three-position pawl gives forward, neutral, and reverse operation, so the winch can free-spool for unwinding or lock for holding the load. The housing and hardware have a black EDC (electro-deposition coating) finish for corrosion resistance, and the crank handle uses a molded, textured roller grip for a secure hold in wet conditions. Each winch ships complete with a 2-inch x 20 foot nylon web strap and a zinc-plated snap hook, so it is ready to mount and use without sourcing a separate strap.\u003c\/p\u003e\u003cp\u003eThis winch is intended for loading, securing, and retrieving trailer boats. It is not intended for use as a hoist, and Attwood states it must not be used for lifting, supporting, or transporting people, or for lifting loads over people.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11195-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Type:\u003c\/strong\u003e Dual drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 2,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear Ratio:\u003c\/strong\u003e 4.1:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePawl Positions:\u003c\/strong\u003e Three-position (forward, neutral, reverse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black EDC (electro-deposition coating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Grip:\u003c\/strong\u003e Molded, textured roller grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Strap:\u003c\/strong\u003e 2-inch x 20 foot nylon web strap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hook:\u003c\/strong\u003e Zinc-plated snap hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 8.2 x 6.3 x 5.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 8.9 x 6.57 x 5.91 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 048903111959\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal trailer winch; not vehicle- or engine-specific. Suitable for trailer boats up to 2,000 pounds, with general allowance for boats up to roughly twice the rated winch capacity when winching onto a trailer.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this product.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Attwood 11195-4 trailer winch?\u003c\/strong\u003e The Attwood 11195-4 dual drive winch is rated for a 2,000 pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gear ratio does this winch use?\u003c\/strong\u003e It uses a 4.1:1 gear ratio, which multiplies crank effort to make loading heavier boats easier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does dual drive mean on this winch?\u003c\/strong\u003e Dual drive distributes the pulling load equally across two sets of gears, which eliminates frame torque and gives smoother operation than a single-drive winch design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Attwood 11195-4 be used to lift or hoist a boat?\u003c\/strong\u003e No, this winch is not intended for use as a hoist and must not be used for lifting, supporting, or transporting people, or for lifting loads over people.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow large a boat can this winch load onto a trailer?\u003c\/strong\u003e The 11195-4 is rated for boats up to 2,000 pounds, and trailer winches of this type are generally used to load boats up to about twice the rated winch capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 11195-4 winch?\u003c\/strong\u003e The winch ships with a 2-inch x 20 foot nylon web strap and a zinc-plated snap hook already fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the winch have a freewheel or neutral setting?\u003c\/strong\u003e Yes, the 11195-4 has a three-position pawl that provides forward, neutral, and reverse operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Attwood 11195-4 have?\u003c\/strong\u003e It has a black EDC (electro-deposition coating) finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trailer winch weigh?\u003c\/strong\u003e The Attwood 11195-4 trailer winch weighs 9.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of handle grip does the winch have?\u003c\/strong\u003e It has a molded, textured roller grip designed to stay secure in wet hands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the strap included long enough for most trailers?\u003c\/strong\u003e Yes, the included strap is 2 inches wide and 20 feet long, terminated with a zinc-plated snap hook.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 11195-4 different from Attwood's single drive winch?\u003c\/strong\u003e The 11195-4 is a dual drive design rated to 2,000 pounds with two sets of gears sharing the load, while Attwood's single drive winch is rated to 1,200 pounds with solid gear construction and a single gear set.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663494363,"sku":"ATT-11195-4","price":59.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ATT-11195-4-2000-Wench-1__60250.1739477318.500.750.jpg?v=1785188730"},{"product_id":"attwood-11126-4-fold-up-trailer-jack-1-500-lb-capacity-dual-wheels-26-inch-lift-fits-3-x-5-inch-tongue","title":"Attwood 11126-4 Fold-Up Trailer Jack, 1500-Pound Capacity, Dual Wheel, Fits 3 Inch x 5 Inch Tongue","description":"\u003cp\u003eThe Attwood 11126-4 is a fold-up trailer jack built to support and lift a trailer tongue during hitching, loading, unloading, and storage. It mounts directly to a 3 inch x 5 inch trailer tongue and uses an adjustable mount and swivel system that lets it pivot down into working position to bear the tongue's weight, or swivel up and lock into place out of the way for towing. A sidewind handle drives the lifting mechanism, making it easy to raise and lower the jack by hand without excessive effort.\u003c\/p\u003e\u003cp\u003eConstruction is corrosion-resistant, zinc-plated steel tubing, chosen for strength and long-term stability under load. The jack rides on dual wheels at its base, which make it easier to reposition the trailer tongue by hand when the jack is lowered. Rated capacity is 1500 pounds, with 12 inches of travel and 26 inches of total lift, giving enough range to raise or lower the tongue to match a hitch height or to level a trailer for storage.\u003c\/p\u003e\u003cp\u003eThis jack fits trailers with a 3 inch x 5 inch tongue and is intended as a direct fit for that mounting pattern rather than a universal clamp-on unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11126-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 26 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheels:\u003c\/strong\u003e Dual wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Size:\u003c\/strong\u003e Fits 3 inch x 5 inch tongue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Type:\u003c\/strong\u003e Sidewind handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 3.5 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697111265\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTrailers with a 3 inch x 5 inch tongue\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer tongue does the Attwood 11126-4 fit?\u003c\/strong\u003e The Attwood 11126-4 mounts on a 3 inch x 5 inch trailer tongue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this trailer jack support?\u003c\/strong\u003e The 11126-4 has a rated capacity of 1500 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much travel and lift does the 11126-4 provide?\u003c\/strong\u003e It offers 12 inches of travel and 26 inches of total lift, enough range to match most hitch heights or level a trailer in storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack have one wheel or two?\u003c\/strong\u003e The Attwood 11126-4 rides on dual wheels at its base, making it easier to move the trailer tongue by hand when lowered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the trailer jack made of?\u003c\/strong\u003e The 11126-4 is built from corrosion-resistant, zinc-plated steel tubing for strength and long-term stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the jack be folded up for towing?\u003c\/strong\u003e Yes, the 11126-4 swivels up and locks into place for transport, then pivots down again to support the tongue for loading, unloading, or storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you raise and lower the Attwood 11126-4?\u003c\/strong\u003e It uses a sidewind handle, which turns to raise or lower the jack without needing to remove it from the tongue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 11126-4 weigh?\u003c\/strong\u003e The trailer jack weighs 18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 11126-4 trailer jack?\u003c\/strong\u003e Item dimensions for the Attwood 11126-4 are 6 x 3.5 x 6 inches, with a minimum height of 12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11126-4 a permanent or removable mount?\u003c\/strong\u003e The 11126-4 uses an adjustable mount and swivel system on the tongue, allowing it to swivel up out of the way for towing rather than requiring removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 11126-4 trailer jack?\u003c\/strong\u003e The UPC for the Attwood 11126-4 is 022697111265.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663559899,"sku":"ATT-11126-4","price":88.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/718T9MQjngL.jpg?v=1784486390"},{"product_id":"attwood-11149-4-single-speed-trailer-winch-1-200-lb-4-1-1-ratio-with-2-x-20-nylon-strap-and-snap-hook","title":"Attwood Trailer Winch 11149-4, 1200 lb Capacity, 4.1:1 Gear Ratio, 2 Inch x 20 Foot Nylon Strap","description":"\u003cp\u003eThe Attwood 11149-4 is a single-drive boat trailer winch rated for loads up to 1,200 pounds, built around solid gear construction with precise tooth engagement for confident, controlled loading and retrieval. The 4.1:1 gear ratio delivers mechanical advantage that makes cranking heavier boats onto the trailer easier, while a 3-position pawl allows forward, neutral, and reverse operation so you can free-spool the strap out or lock it under load as needed.\u003c\/p\u003e\u003cp\u003eThis winch includes a 2 inch wide by 20 foot long nylon web strap made from UV-resistant webbing that resists tangling on the winch drum. The strap terminates in a zinc-plated, forged steel snap hook with an extra-long throat, designed for easier attachment to bow eyes on boats. The winch body is finished in black. Attwood backs the 11149-4 with a 3 year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11149-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Type:\u003c\/strong\u003e Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear Ratio:\u003c\/strong\u003e 4.1:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1200 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePawl Positions:\u003c\/strong\u003e 3-position (forward, neutral, reverse)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap Material:\u003c\/strong\u003e UV-resistant nylon webbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Type:\u003c\/strong\u003e Forged steel snap hook, zinc-plated, extra-long throat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic (housing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 048903111492\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Attwood 11149-4 trailer winch?\u003c\/strong\u003e The Attwood 11149-4 is rated for loads up to 1,200 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gear ratio does this winch use?\u003c\/strong\u003e It has a 4.1:1 gear ratio, giving mechanical advantage for cranking heavier boats onto the trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11149-4 a single or dual drive winch?\u003c\/strong\u003e It is a single-drive trailer winch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size strap comes with this winch?\u003c\/strong\u003e A 2 inch wide by 20 foot long nylon web strap is included with the Attwood 11149-4.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the strap made of?\u003c\/strong\u003e The included strap is made from UV-resistant nylon webbing designed to resist tangling on the winch drum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hook is on the strap?\u003c\/strong\u003e A zinc-plated, forged steel snap hook with an extra-long throat is attached to the strap, sized for easier attachment to boat bow eyes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the winch be operated in reverse or left in neutral?\u003c\/strong\u003e Yes, the 11149-4 has a 3-position pawl for forward, neutral, and reverse operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 11149-4 weigh?\u003c\/strong\u003e The winch weighs 7.125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 11149-4 winch?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 11149-4 come with a warranty?\u003c\/strong\u003e Yes, it is backed by a 3 year warranty from Attwood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box with this winch?\u003c\/strong\u003e The Attwood 11149-4 ships as a complete single-drive trailer winch with a 2 inch by 20 foot nylon strap already attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat winch strength should be paired with the 11149-4?\u003c\/strong\u003e NMMA, SAE, and BIA standards require the minimum breaking strength of the winch strap, cable, or rope and hook to be at least 1.5 times the rated straight-line pull of the winch, which the included strap on the 11149-4 is matched to.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663658203,"sku":"ATT-11149-4","price":49.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ATT-11149-4-1200-Wench-1__61879.1739477318.500.750.jpg?v=1785188437"},{"product_id":"attwood-10108-lock-n-stow-motor-lock-for-mercury-135-150-175-optimax-75-200-hp-efi-outboards-steel-trailering-support","title":"Attwood 10108 Lock N' Stow Outboard Motor Trailering Lock - Fits Mercury 135, 150, 175 OptiMax and 75-200 HP EFI Engines","description":"\u003cp\u003eThe Attwood 10108 Lock N' Stow is a trailering lock that secures an outboard motor in a forward position while towing, greatly reducing the risk of road shock damaging the engine. Unlike devices that tie the engine's lower unit directly to the trailer, the Lock N' Stow does not restrain the lower unit, which eliminates scuff marks on the engine and trailer and removes the risk of excessive pressure being placed on hydraulic seals during transport.\u003c\/p\u003e\u003cp\u003eConstruction is black powder-coated steel for corrosion resistance and durability, paired with stainless steel pins for long-term reliability in marine environments. The compact design allows the lock to be stored easily in nearly any boat compartment when not in use, so it is always on hand before towing. It is recommended for use in salt water applications and is built to handle outboard engines up to 200 horsepower.\u003c\/p\u003e\u003cp\u003eThe Attwood 10108 is designed to fit Mercury 135 OptiMax, 150 OptiMax, and 175 OptiMax outboards, as well as Mercury 75 HP to 200 HP EFI outboard motors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Lock N' Stow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Black powder-coated steel with stainless steel pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black powder-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower:\u003c\/strong\u003e 200 horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014599101086\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00014599101086\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 135 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 150 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 175 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 75 HP to 200 HP EFI outboard engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Attwood 10108 Lock N' Stow do?\u003c\/strong\u003e The Attwood 10108 Lock N' Stow securely locks an outboard motor in a forward position during trailering, which greatly reduces the risk of road shock damaging the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboard engines fit the Attwood 10108?\u003c\/strong\u003e The Attwood 10108 fits Mercury 135 OptiMax, 150 OptiMax, and 175 OptiMax outboards, as well as Mercury 75 HP to 200 HP EFI outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lock N' Stow tie the outboard's lower unit to the trailer?\u003c\/strong\u003e No. The Attwood 10108 does not tie the engine's lower unit to the trailer as some other locking devices do, which eliminates scuff marks and removes the risk of excessive pressure on hydraulic seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 10108 made of?\u003c\/strong\u003e The Lock N' Stow is made of black powder-coated steel with stainless steel pins for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 10108 weigh?\u003c\/strong\u003e The Attwood 10108 Lock N' Stow weighs 4.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 10108 Lock N' Stow suitable for saltwater use?\u003c\/strong\u003e Yes, the Attwood 10108 is recommended for use in salt water applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Lock N' Stow be stored on the boat?\u003c\/strong\u003e Yes, the compact design of the Attwood 10108 allows it to be stored easily in nearly any boat compartment when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the Attwood 10108?\u003c\/strong\u003e The Attwood 10108 Lock N' Stow is rated for outboard engines up to 200 horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 10108 help protect hydraulic seals during trailering?\u003c\/strong\u003e Yes, because the Lock N' Stow does not restrain the lower unit to the trailer, it prevents the risk of excessive pressure being placed on the engine's hydraulic seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the pins on the Attwood 10108 made of?\u003c\/strong\u003e The Attwood 10108 Lock N' Stow uses stainless steel pins.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663789275,"sku":"ATT-10108","price":138.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-10108_large__11272.1558177157.500.750.jpg?v=1785188051"},{"product_id":"attwood-11127-4-fold-up-trailer-jack-1-000-lb-capacity-24-inch-lift-10-inch-travel-single-wheel-fits-3-x-5-inch-tongue","title":"Attwood 11127-4 Fold-Up Trailer Jack, 1,000-Pound Capacity, 10-Inch Travel, 24-Inch Lift, Single Wheel","description":"\u003cp\u003eThe Attwood 11127-4 Fold-Up Trailer Jack provides stable, reliable lifting and lowering of a trailer tongue for loading, unloading, launching, and storage. It is built from corrosion-resistant, zinc-plated steel tubing for strength and durability in wet marine and towing environments. The adjustable mount and swivel system lets the jack pivot down to support the trailer tongue when in use, then swivel up and lock into place for clear road transport. A sidewind handle operates the lift mechanism, making it easy to raise and lower the trailer tongue by hand without straining.\u003c\/p\u003e\u003cp\u003eThis jack mounts on a standard 3-inch x 5-inch trailer tongue and rides on a single wheel at its base, so it can be rolled into position rather than dragged or lifted into place. It offers 10 inches of travel and 24 inches of total lift, with a 1,000-pound load capacity, making it suited to smaller and mid-size boat trailers. The fold-up design keeps the jack out of the way during towing while remaining quick to deploy at the ramp or in the driveway.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11127-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fold-Up Trailer Jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheels:\u003c\/strong\u003e 1 (single wheel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Size:\u003c\/strong\u003e 3-inch x 5-inch trailer tongue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle Type:\u003c\/strong\u003e Sidewind handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.91 x 2.36 x 21.65 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697111272\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Attwood 11127-4 trailer jack?\u003c\/strong\u003e The Attwood 11127-4 Fold-Up Trailer Jack has a 1,000-pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much travel and lift does this trailer jack offer?\u003c\/strong\u003e It provides 10 inches of travel and 24 inches of total lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer tongue does the 11127-4 fit?\u003c\/strong\u003e It mounts on a standard 3-inch x 5-inch trailer tongue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many wheels does the Attwood 11127-4 have?\u003c\/strong\u003e This model has a single wheel at its base to support rolling the jack into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Attwood 11127-4 trailer jack made from?\u003c\/strong\u003e It is constructed from corrosion-resistant, zinc-plated steel tubing for strength and durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the handle work on this trailer jack?\u003c\/strong\u003e A sidewind handle is used to raise and lower the jack, making the lifting motion easier to control by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the jack be folded up for towing?\u003c\/strong\u003e Yes, the Attwood 11127-4 swivels up and locks into place for transport, then pivots down to support the tongue when loading, unloading, or in storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 11127-4 trailer jack weigh?\u003c\/strong\u003e The trailer jack weighs 14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the packaged jack?\u003c\/strong\u003e The Attwood 11127-4 measures 5.91 x 2.36 x 21.65 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 11127-4 suited for saltwater and towing environments?\u003c\/strong\u003e Yes, its zinc-plated steel tubing is corrosion-resistant, which suits the repeated exposure to water and road conditions common with boat trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Attwood 11127-4 trailer jack?\u003c\/strong\u003e The UPC for the Attwood 11127-4 Fold-Up Trailer Jack is 022697111272.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663887579,"sku":"ATT-11127-4","price":69.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71oRHBOXv6L.jpg?v=1784486407"},{"product_id":"attwood-10107-lock-n-stow-outboard-motor-support-fits-mercury-200-255-optimax-and-225-250-hp-efi-trailering-lock","title":"Attwood 10107 Lock N' Stow Outboard Trailering Lock, Fits Mercury 200 OptiMax, 255 OptiMax, 225 EFI, 250 EFI","description":"\u003cp\u003eThe Attwood 10107 Lock N' Stow secures an outboard motor in a forward position during trailering, greatly reducing the risk of road shock damaging the engine. Unlike devices that tie the engine's lower unit directly to the trailer, the Lock N' Stow does not, so it eliminates scuff marks on the boat or trailer finish and avoids placing excessive pressure on the engine's hydraulic seals. The lock is built with an aluminum body finished in a black powder coat for corrosion resistance, and uses stainless steel pins for long-term durability, including in salt water use. Its compact design allows it to be stored easily in nearly any boat compartment when not in use. The Attwood 10107 is sized for larger outboards and fits Mercury 200 OptiMax, 255 OptiMax, 225-HP EFI, and 250-HP EFI engines, making it a practical trailering accessory for boat owners running these Mercury outboard models.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Mercury 200 OptiMax, 255 OptiMax, 225 EFI, 250 EFI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower:\u003c\/strong\u003e 250 Horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black powder-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.308 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 014599101079\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury 200 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 255 OptiMax\u003c\/li\u003e\n\u003cli\u003eMercury 225-HP EFI\u003c\/li\u003e\n\u003cli\u003eMercury 250-HP EFI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard engines does the Attwood 10107 fit?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow fits Mercury 200 OptiMax, 255 OptiMax, 225-HP EFI, and 250-HP EFI outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lock N' Stow actually do?\u003c\/strong\u003e It locks an outboard motor in a forward position during trailering, which greatly reduces the risk of road shock damaging the engine while the boat is being towed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 10107 tie the engine's lower unit to the trailer?\u003c\/strong\u003e No. Unlike some trailering devices, the Attwood 10107 Lock N' Stow does not tie the lower unit to the trailer, which eliminates scuff marks on the boat or trailer finish and avoids excessive pressure on the engine's hydraulic seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 10107 made of?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow has an aluminum body with a black powder-coated finish, and its pins are stainless steel for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 10107 weigh?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow weighs 4.308 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 10107 suitable for salt water use?\u003c\/strong\u003e Yes, the Attwood 10107 Lock N' Stow is recommended for salt water use thanks to its corrosion-resistant aluminum body and stainless steel pins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Attwood 10107 be used with lower horsepower Mercury engines?\u003c\/strong\u003e No. The Attwood 10107 is designed for Mercury 200 OptiMax, 255 OptiMax, 225-HP EFI, and 250-HP EFI engines; a separate part, the Attwood 10108, covers Mercury 135 OptiMax, 150 OptiMax, 175 OptiMax, and 75-HP to 200-HP EFI engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Attwood 10107 operated?\u003c\/strong\u003e The Lock N' Stow is a manually operated engine mount device, requiring no electrical or hydraulic power to lock the outboard in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Attwood 10107 stored when not in use?\u003c\/strong\u003e Its compact design lets the Lock N' Stow be stored easily in nearly any boat compartment when it is not securing the outboard for trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the Attwood 10107?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow is rated for outboards up to 250 horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 10107 replace tie-down straps?\u003c\/strong\u003e The Attwood 10107 Lock N' Stow serves a different function than transom tie-down straps: it locks the outboard engine itself in a forward position, while tie-down straps secure the boat to the trailer at the transom eyes.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989663920347,"sku":"ATT-10107","price":149.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-10107_large__16486.1558177101.500.750.jpg?v=1785189136"},{"product_id":"1-2-20-zinc-plated-hex-lock-nut-for-trailer-brake-actuators-mpn-006-256-00","title":"Dexter Hex Lock Nut, 1\/2-20, Zinc Plated - Trailer Brake Actuator Hardware, Part 006-256-00","description":"\u003cp\u003eThe Dexter 006-256-00 is a hex lock nut sized for 1\/2-20 threaded studs and bolts, finished in zinc plating for corrosion resistance. It is used as trailer brake actuator hardware, securing components in the actuator assembly against loosening from vibration and repeated cycling during towing. The hex head allows the nut to be tightened and removed with a standard wrench or socket, and the lock feature is designed to hold torque over time rather than backing off under load. At 0.03 pounds, it is a small, lightweight fastener meant to be paired with the correct matching stud or bolt of the same 1\/2-20 thread pitch. This is a genuine Dexter part, identified by part number 006-256-00, intended as a direct replacement when the original hex lock nut on a trailer brake actuator is worn, corroded, or missing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-256-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hex Lock Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trailer Brake Actuator Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151186120\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the Dexter 006-256-00 hex lock nut?\u003c\/strong\u003e It is threaded 1\/2-20, so it should be paired with a stud or bolt of the same 1\/2-20 thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this lock nut have?\u003c\/strong\u003e The Dexter 006-256-00 hex lock nut is zinc plated for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 006-256-00 a genuine Dexter part?\u003c\/strong\u003e Yes, it is a genuine Dexter hex lock nut, identified by part number 006-256-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hex lock nut used for?\u003c\/strong\u003e The Dexter 006-256-00 is used as trailer brake actuator hardware, securing components in the actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 006-256-00 hex lock nut weigh?\u003c\/strong\u003e It weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size wrench or socket do I need to install the Dexter 006-256-00?\u003c\/strong\u003e It has a standard hex head, so it can be tightened or removed with a wrench or socket sized to its hex flats; the Dexter 006-256-00 does not require any special tooling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 006-256-00 come with the matching bolt or stud?\u003c\/strong\u003e No, the Dexter 006-256-00 is the hex lock nut only; the matching 1\/2-20 stud or bolt is a separate component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a lock nut instead of a standard hex nut on a trailer brake actuator?\u003c\/strong\u003e A lock nut such as the Dexter 006-256-00 is designed to resist loosening from vibration and repeated cycling, which is important on trailer brake actuator hardware that sees ongoing movement during towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Dexter 006-256-00 hex lock nut?\u003c\/strong\u003e The UPC for this Dexter hex lock nut is 106151186120.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Dexter 006-256-00 be reused after removal?\u003c\/strong\u003e Lock nuts like the Dexter 006-256-00 are generally intended to be replaced once removed, since the locking feature can lose effectiveness after repeated use.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256281307,"sku":"DEX-006-256-00","price":1.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-1861200_lg__28644.1558140685.500.750.jpg?v=1785329085"},{"product_id":"dexter-005-059-00-tang-washer-for-e-z-lube-axles-1-14-uns-spindle-nut-fits-dexter-axles-prior-to-6-02","title":"Dexter Tang Washer 005-059-00, 1 3\/4 Inch 14 GA, for E-Z Lube Trailer Axle Spindle Nuts (Prior to 6\/02)","description":"\u003cp\u003eThe Dexter Tang Washer, part number 005-059-00, is a 1 3\/4 inch, 14 gauge washer used at the spindle nut on Dexter E-Z Lube trailer axles. Its tanged edge locks into the spindle to keep the washer from spinning while the spindle nut is torqued, helping maintain correct bearing preload on the axle. This washer is one of the components included in Dexter's Spindle Nuts \u0026amp; Washers Kit (K71-335-00), which is built for Dexter E-Z Lube axles with a 1 inch-14 UNS spindle thread, produced prior to 6\/02. It is a wear item commonly replaced during bearing service, hub repacking, or brake work on trailer axles, and keeping a spare on hand avoids delays when a tang washer is found damaged or missing during routine maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 005-059-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Description:\u003c\/strong\u003e Washer, Tang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge:\u003c\/strong\u003e 14 GA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327603207\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Dexter E-Z Lube axles, 1 inch-14 UNS (prior to 6\/02)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed In Kit:\u003c\/strong\u003e Spindle Nuts \u0026amp; Washers Kit K71-335-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Dexter E-Z Lube axles with 1 inch-14 UNS spindle threads, produced prior to 6\/02.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter tang washer 005-059-00 used for?\u003c\/strong\u003e It is a tang washer that sits at the spindle nut on Dexter E-Z Lube trailer axles, with its tanged edge locking into the spindle so the washer cannot spin while the spindle nut is torqued down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is washer 005-059-00?\u003c\/strong\u003e This Dexter tang washer measures 1 3\/4 inches and is made from 14 gauge material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this washer fit my trailer axle?\u003c\/strong\u003e Part 005-059-00 fits Dexter E-Z Lube axles with a 1 inch-14 UNS spindle thread, on axles produced prior to 6\/02. Check your axle's thread and production date before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 005-059-00 tang washer weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this washer sold as part of a kit?\u003c\/strong\u003e Yes, 005-059-00 is one of the components included in Dexter's Spindle Nuts \u0026amp; Washers Kit, K71-335-00, which also includes a tongue washer and hex nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should a tang washer be replaced?\u003c\/strong\u003e A tang washer like 005-059-00 is typically replaced during bearing service, hub repacking, or brake work if it is found bent, cracked, or worn where it locks against the spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 005-059-00 a genuine Dexter part?\u003c\/strong\u003e Yes, 005-059-00 is the genuine Dexter manufacturer part number for this tang washer, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'tang' mean on this washer?\u003c\/strong\u003e On the 005-059-00 washer, the tang is a small tab or flange along the edge that engages a slot on the spindle, preventing the washer from rotating as the spindle nut is tightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy this washer separately from the full kit?\u003c\/strong\u003e Yes, the Dexter tang washer 005-059-00 is available on its own as an individual replacement part in addition to being included in kit K71-335-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is 005-059-00?\u003c\/strong\u003e This Dexter tang washer is listed under boat trailer brakes, reflecting its use on braked trailer axle assemblies.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256314075,"sku":"DEX-005-059-00","price":1.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_005-059-00_Tang_Washer_1-3-4in_14GA__99318.1741879657.500.750.jpg?v=1785329093"},{"product_id":"dexter-006-257-00-hex-lock-nut-7-16-20-zinc-plated-trailer-brake-actuator-nut","title":"Dexter Hex Lock Nut 7\/16-20, Zinc Plated, 006-257-00","description":"\u003cp\u003eThe Dexter 006-257-00 is a 7\/16-20 hex lock nut with a zinc-plated finish, used as hardware for trailer brake actuators. The nut measures 0.25 inches thick and is designed to thread onto a 7\/16-20 stud or bolt while resisting loosening from vibration, a common requirement on trailer running gear and brake components. The zinc plating provides a protective, corrosion-resistant surface suited to the exposed conditions trailer hardware typically sees.\u003c\/p\u003e\u003cp\u003eThis is a small, precise replacement fastener rather than a full kit, making it useful when a single nut is lost, damaged, or worn during trailer brake actuator service or maintenance. At just 0.01 pounds, it ships easily alongside other small hardware items.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-257-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hex Lock Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 7\/16-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Category:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the Dexter 006-257-00 hex lock nut?\u003c\/strong\u003e The Dexter 006-257-00 is sized for a 7\/16-20 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this nut a locking style or a standard hex nut?\u003c\/strong\u003e It is a hex lock nut, part number 006-257-00, designed to resist loosening under vibration rather than a plain hex nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick is the 006-257-00 nut?\u003c\/strong\u003e 0.25 inches thick, which is the full thickness of this Dexter hex lock nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this nut have?\u003c\/strong\u003e It has a zinc-plated finish, giving the Dexter 006-257-00 added corrosion resistance for exposed trailer hardware use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this nut typically used for?\u003c\/strong\u003e The Dexter 006-257-00 hex lock nut is used as hardware for trailer brake actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this nut weigh?\u003c\/strong\u003e 0.01 pounds, reflecting the small size of the Dexter 006-257-00 hex lock nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order just one nut, or does it only come in a kit?\u003c\/strong\u003e The 006-257-00 is sold as an individual hex lock nut, useful when only a single replacement fastener is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 006-257-00 genuine Dexter hardware?\u003c\/strong\u003e Yes, part number 006-257-00 is a genuine Dexter hex lock nut, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this nut resist corrosion in wet or road-salt conditions?\u003c\/strong\u003e The zinc plating on the Dexter 006-257-00 is intended to protect against corrosion, which suits the exposed conditions trailer brake actuator hardware is often subjected to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install the 006-257-00 nut?\u003c\/strong\u003e As a standard 7\/16-20 hex lock nut, the 006-257-00 installs with a wrench or socket sized to its hex head, matching typical hardware installation for trailer brake actuator components.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256346843,"sku":"DEX-006-257-00","price":1.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-2339100_lg__12952.1558140850.500.750.jpg?v=1785329085"},{"product_id":"grade-8-hex-cap-screw-7-16-20-x-2-63-in-zinc-plated-short-thread-trailer-bolt-mpn-007-380-00","title":"Dexter Hex Cap Screw 7\/16-20 x 2.63 Inch, Grade 8, Zinc Plated, Short Thread, Part 007-380-00","description":"\u003cp\u003eThis is a Grade 8 hex cap screw from Dexter, part number 007-380-00, sized 7\/16-20 x 2.63 inches with a short thread length. It is built for trailer brake actuator hardware applications where a high-strength fastener is required to secure components under repeated load and vibration. The 7\/16-20 designation indicates a 7\/16 inch diameter fastener with 20 threads per inch (a fine thread pitch), and the 2.63 inch overall length with short thread run is sized specifically for actuator mounting hardware rather than general-purpose use. Grade 8 steel construction gives this screw a higher tensile strength rating than standard Grade 2 or Grade 5 hardware, making it suitable for structural and safety-critical fastening points such as brake actuator assemblies. The zinc plating provides a protective finish against corrosion and rust, which is important given the exposure to moisture, road spray, and general outdoor conditions trailers experience. The hex cap head allows the screw to be driven and torqued with a standard wrench or socket. This fastener is sold as a genuine Dexter part and is intended as a direct replacement or maintenance part for trailer brake actuator assemblies that use this size and grade of hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 007-380-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hex Cap Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 7\/16-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Short thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Type:\u003c\/strong\u003e Hex cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151233900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trailer brake actuator hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter 007-380-00 hex cap screw?\u003c\/strong\u003e The Dexter 007-380-00 is a 7\/16-20 hex cap screw, meaning it has a 7\/16 inch diameter with 20 threads per inch, and it measures 2.63 inches in overall length with a short thread run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this fastener Grade 8?\u003c\/strong\u003e Yes, part number 007-380-00 is a Grade 8 hex cap screw, which carries a higher tensile strength rating than standard Grade 2 or Grade 5 hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this screw have?\u003c\/strong\u003e It has a zinc plated finish, which protects the Grade 8 steel fastener against corrosion from moisture and road exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this screw used for?\u003c\/strong\u003e Dexter 007-380-00 is used as trailer brake actuator hardware, securing components within brake actuator assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The 007-380-00 hex cap screw weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a short thread or full thread screw?\u003c\/strong\u003e Part 007-380-00 has a short thread design, with the threaded portion covering less than the full shank length, which is typical for actuator mounting applications rather than general hardware use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, 007-380-00 is a genuine Dexter part, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool do I need to install this screw?\u003c\/strong\u003e The hex cap head on the 007-380-00 screw is designed to be driven with a standard wrench or socket sized to fit a 7\/16 inch hex cap fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 007-380-00 screw made from?\u003c\/strong\u003e This fastener is made from Grade 8 steel, chosen for its high strength in load-bearing brake actuator hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this screw be used for general hardware repairs, or is it actuator-specific?\u003c\/strong\u003e The 007-380-00 is sized and threaded specifically for trailer brake actuator hardware applications, so it should be matched to that use rather than substituted into unrelated general-purpose fastening jobs.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256379611,"sku":"DEX-007-380-00","price":4.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-2339000_lg__56231.1558140822.500.750.jpg?v=1785329084"},{"product_id":"dexter-006-109-00-5-8-18-90-degree-cone-wheel-nut-grade-8-zinc-plated","title":"Dexter 5\/8-18 90 Degree Cone Nut, Grade 8 Zinc Plated Trailer Axle Spindle Nut, Part 006-109-00","description":"\u003cp\u003eThe Dexter 006-109-00 is a 90 degree cone nut sized for 5\/8-18 threaded trailer axle spindles. It is used to secure and preload the wheel bearing assembly on the spindle end of a boat trailer axle, seating against the bearing race to hold proper bearing adjustment as the wheel rotates. The nut is manufactured to Grade 8 strength and finished with zinc plating for corrosion resistance in wet and road-salt trailer environments, making it a common replacement item during hub, bearing, or spindle service.\u003c\/p\u003e\u003cp\u003eThis cone nut measures 1.06 inches across the flats, so it accepts a standard wrench or socket sized to that dimension for installation and torque. It is sold individually and is intended as a direct fit for axles using a 5\/8-18 threaded spindle with a 90 degree cone-style bearing nut, the same style used across Dexter's light duty trailer axle line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-109-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cone Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNut Style:\u003c\/strong\u003e 90 degree cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcross Flats:\u003c\/strong\u003e 1.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles with a 5\/8-18 threaded spindle designed for a 90 degree cone nut.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the Dexter 006-109-00 cone nut fit?\u003c\/strong\u003e The Dexter 006-109-00 is sized for a 5\/8-18 threaded trailer axle spindle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wrench size do I need to install this nut?\u003c\/strong\u003e This cone nut measures 1.06 inches across the flats, so a wrench or socket sized to 1.06 inches is needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a 90 degree cone nut used for?\u003c\/strong\u003e A 90 degree cone nut seats against the wheel bearing race on a trailer axle spindle to hold proper bearing preload and adjustment as the wheel rotates, which is the function of the Dexter 006-109-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and finish is the 006-109-00 cone nut made of?\u003c\/strong\u003e It is a Grade 8 nut with a zinc plated finish, chosen for strength and corrosion resistance in trailer wheel-end service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this cone nut weigh?\u003c\/strong\u003e The Dexter 006-109-00 cone nut weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cone nut sold as a single unit or in a set?\u003c\/strong\u003e The Dexter 006-109-00 is sold as a single individual cone nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cone nut fit any trailer axle spindle?\u003c\/strong\u003e It fits axle spindles that use a 5\/8-18 thread with a 90 degree cone nut style; check your spindle thread size and nut style before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace this cone nut?\u003c\/strong\u003e The 006-109-00 is typically replaced during wheel bearing service, hub repack, or spindle work where the original cone nut is worn, damaged, or removed for disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 006-109-00 an OEM or aftermarket part?\u003c\/strong\u003e The 006-109-00 is a genuine Dexter part manufactured for Dexter trailer axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this nut come with a matching washer or cotter pin?\u003c\/strong\u003e The Dexter 006-109-00 listing covers the cone nut only; washers, cotter pins, or other hardware are not included.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256412379,"sku":"DEX-006-109-00","price":1.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_006-109-00_Cone_Wheel_Nut_5-8-18_Grade_8_Zinc_Plated_1.06_AF__00185.1741882614.500.750.jpg?v=1785329081"},{"product_id":"90-degree-cone-nut-9-16-18-grade-5-zinc-plated-boat-trailer-wheel-lug-nut-mpn-006-060-00","title":"Dexter Cone Nut, 90 Degree, 9\/16-18 Thread, Grade 5, Zinc Plated, for Boat Trailer Brakes","description":"\u003cp\u003eThis Dexter cone nut (part number 006-060-00) is a 90 degree cone-style fastener designed for boat trailer brake assemblies. The 90 degree cone seat allows the nut to self-center and seat securely against the mating component, a design commonly used where standard flat-face hex nuts are not suitable for the assembly. It is machined with a 9\/16-18 thread and built to Grade 5 strength, giving it the load-bearing capacity expected of a structural fastener in a trailer brake system. The nut is finished with a zinc plating, which provides a protective barrier against corrosion, an important feature for hardware used in and around boat trailers that are regularly exposed to water, road spray, and launch-ramp conditions.\u003c\/p\u003e\u003cp\u003eAt 0.1 pounds, this is a small, lightweight component intended to be used as part of a larger boat trailer brake assembly rather than as a standalone part. It is categorized within boat trailer brake hardware and is sold under the Dexter brand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 006-060-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Cone Nut, 90 Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 9\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Grade 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone Angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327604020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat trailer brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 006-060-00 cone nut used for?\u003c\/strong\u003e The Dexter 006-060-00 is a 90 degree cone nut used as a fastener within boat trailer brake assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this cone nut have?\u003c\/strong\u003e This Dexter cone nut has a 9\/16-18 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade is the 006-060-00 cone nut rated?\u003c\/strong\u003e It is rated Grade 5, indicating the strength classification of the fastener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cone nut corrosion resistant?\u003c\/strong\u003e Yes, the Dexter 006-060-00 is zinc plated, which provides a protective finish against corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the cone seat on this nut?\u003c\/strong\u003e The cone seat on part number 006-060-00 is machined at 90 degrees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 006-060-00 cone nut weigh?\u003c\/strong\u003e This cone nut weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 006-060-00 cone nut made from?\u003c\/strong\u003e It is made from zinc-plated steel, consistent with its Grade 5 rating and zinc finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter cone nut sold individually?\u003c\/strong\u003e Yes, the 006-060-00 is a single cone nut component rather than a kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of hardware does this part belong to?\u003c\/strong\u003e The 006-060-00 cone nut is categorized as boat trailer brake hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a cone nut different from a standard hex nut?\u003c\/strong\u003e A cone nut, like the Dexter 006-060-00, has an angled 90 degree seat rather than a flat face, allowing it to self-center against a matching tapered surface in the brake assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256445147,"sku":"DEX-006-060-00","price":2.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_006-060-00_Cone_Nut_90_Degree_9-16-18_Grade_5_Zinc_Plated__83778.1747363801.500.750.jpg?v=1785329083"},{"product_id":"dexter-7k-trailer-hub-and-drum-kit-6-on-5-50-bolt-circle-42mm-bearing-12-x-2-brakes-mpn-008-388-05","title":"Dexter 008-388-05 Trailer Hub and Drum Assembly, 7,000 lb, 42mm Bearing, 12 x 2 Inch Brakes","description":"\u003cp\u003eThe Dexter 008-388-05 is a trailer hub and drum assembly rated for 7,000 lb axle applications. It is built around a 42mm bearing setup and comes with bearing cups and wheel studs, so the core rotating and mounting hardware is ready to install as one unit rather than sourced piece by piece. The 1\/2 inch wheel studs are sized to accept standard 1\/2 inch lug nuts, and the drum is sized for 12 x 2 inch brakes, matching common 7,000 lb axle brake setups.\u003c\/p\u003e\u003cp\u003eThis assembly is intended as a direct replacement for a worn or damaged hub and drum on a 7,000 lb rated trailer axle using a 42mm bearing and 12 x 2 inch brakes. Because it ships as a complete hub and drum unit with cups and studs included, it simplifies a hub replacement job by reducing the number of separate parts that need to be matched and ordered. Confirm your trailer's axle capacity, bearing size, stud size, and brake size against the specifications below before ordering, since hub and drum assemblies are matched closely to these dimensions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-388-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hub and Drum Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Size:\u003c\/strong\u003e 42 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bearing cups and wheel studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 37.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load rating of the Dexter 008-388-05 hub and drum assembly?\u003c\/strong\u003e The Dexter 008-388-05 is rated for 7,000 pound axle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing size does this hub and drum use?\u003c\/strong\u003e It is built around a 42mm bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size comes with the 008-388-05 assembly?\u003c\/strong\u003e 1\/2 inch wheel studs are included with the Dexter 008-388-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brake size is this hub and drum sized for?\u003c\/strong\u003e It is sized for 12 x 2 inch brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 008-388-05 include the bearing cups and studs, or are those sold separately?\u003c\/strong\u003e Bearing cups and wheel studs are included with this hub and drum assembly, so it does not need to be paired with those parts separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 008-388-05 hub and drum weigh?\u003c\/strong\u003e The assembly weighs 37.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 008-388-05 a complete hub and drum, or just the drum?\u003c\/strong\u003e It is a complete hub and drum assembly, not a bare drum, and it comes with the bearing cups and wheel studs already included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 008-388-05 fit any 7,000 lb trailer axle?\u003c\/strong\u003e It is designed for 7,000 lb rated axles using a 42mm bearing, 1\/2 inch studs, and 12 x 2 inch brakes, so match those dimensions against your trailer's axle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, the 008-388-05 hub and drum assembly is a Dexter manufactured part identified by that part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 008-388-05?\u003c\/strong\u003e The hub and drum assembly ships with the bearing cups and wheel studs installed, ready to mount to the axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256707291,"sku":"DEX-008-388-05","price":249.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__18189.1747363879.500.750.jpg?v=1785329078"},{"product_id":"dexter-007-126-01-trailer-suspension-shackle-bolt-7-16-20-x-2-90-in-zinc-plated-shoulder-bolt","title":"Dexter Shackle Bolt 007-126-01, 7\/16-20 x 2.90 Inch, 9\/16 Inch Body, Zinc Plated","description":"\u003cp\u003eThe Dexter Shackle Bolt 007-126-01 is a zinc plated shoulder bolt designed for trailer leaf spring shackle assemblies. It secures the shackle link to the spring hanger or equalizer, allowing the leaf spring to pivot as the axle moves through its suspension travel. The bolt features a 7\/16-20 thread, a 2.90 inch length, and a 9\/16 inch diameter shoulder body that fits through the shackle and spring eye bushings to provide a precise, low-wear pivot point.\u003c\/p\u003e\u003cp\u003eThe zinc finish resists corrosion in the wet, road-spray environment trailer suspension hardware is regularly exposed to, helping the bolt hold up against rust over repeated use. Because this is a shoulder bolt rather than a standard fully-threaded bolt, the smooth 9\/16 inch body diameter section reduces slop at the pivot point compared to using a generic hardware-store bolt, which helps keep the shackle assembly tight and reduces premature bushing wear.\u003c\/p\u003e\u003cp\u003eThis shackle bolt is sold as an individual replacement fastener for rebuilding or servicing a trailer leaf spring shackle. It is intended for use with shackles and hanger brackets sized for a 7\/16 inch bolt with a 9\/16 inch body diameter.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 007-126-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shackle Bolt (shoulder bolt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 7\/16-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 2.90 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327605119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer suspension hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 007-126-01 shackle bolt used for?\u003c\/strong\u003e It is a shoulder bolt used to secure a trailer leaf spring shackle to the spring hanger or equalizer, forming the pivot point for the shackle as the suspension moves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does this shackle bolt use?\u003c\/strong\u003e The 007-126-01 shackle bolt has a 7\/16-20 thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Dexter 007-126-01 shackle bolt?\u003c\/strong\u003e It measures 2.90 inches in overall length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the body diameter of this bolt?\u003c\/strong\u003e The shoulder (body) section of the 007-126-01 bolt is 9\/16 inch in diameter, which is the section that rides inside the shackle and spring eye bushings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 007-126-01 shackle bolt have?\u003c\/strong\u003e It has a zinc plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this shackle bolt weigh?\u003c\/strong\u003e The Dexter 007-126-01 shackle bolt weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bolt genuine Dexter hardware or an aftermarket copy?\u003c\/strong\u003e Part number 007-126-01 is a genuine Dexter shackle bolt, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bolt come with a locknut?\u003c\/strong\u003e This listing is for the 007-126-01 shackle bolt itself; a matching locknut is a separate component and not included in this bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a standard hardware-store bolt instead of the 007-126-01?\u003c\/strong\u003e A generic fully-threaded bolt lacks the 9\/16 inch smooth shoulder body of the 007-126-01, which is what keeps the shackle pivot tight, so using a non-shoulder bolt can lead to looseness and faster bushing wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer hardware is the 007-126-01 designed for?\u003c\/strong\u003e It is designed for trailer leaf spring shackle assemblies, connecting the shackle link to the spring hanger or equalizer.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256740059,"sku":"DEX-007-126-01","price":2.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_007-126-01_Bolt_Shoulder_7-16-20x2.90_9-16_Body_Zinc_Shackle__31957.1741883596.500.750.jpg?v=1785329091"},{"product_id":"dexter-008-219-9g-hub-and-drum-kit-7-000-lb-7k-trailer-axle-8-on-6-50-bolt-pattern-5-8-studs-ez-lube","title":"Dexter 008-219-9G Hub and Drum Kit, 7000 lb Capacity, 5\/8 Inch Studs, EZ-Lube, 2.250 Inch","description":"\u003cp\u003eThe Dexter 008-219-9G is a heavy-duty hub and drum kit built for 7,000 lb capacity trailer axles, including boat trailer axles fitted with this stud and bearing configuration. The kit is designed around 5\/8 inch wheel studs and features EZ-Lube bearing protection, which allows grease to be added through a zerk fitting without disassembling the hub, making routine bearing maintenance faster and reducing the risk of running a bearing dry. The bearing and seal bore is sized to 2.250 inches, and the kit carries the 865 bearing set designation used by Dexter for this hub assembly.\u003c\/p\u003e\u003cp\u003eAs a hub and drum kit, the 008-219-9G is intended to supply the core rotating hardware needed at the wheel end of a compatible 7,000 lb axle, pairing the hub\/drum with its associated bearing set to support a full hub rebuild or upgrade. The complete kit weighs 41 pounds as shipped.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-219-9G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hub and Drum Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Lubrication:\u003c\/strong\u003e EZ-Lube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing\/Seal Bore Diameter:\u003c\/strong\u003e 2.250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Set Designation:\u003c\/strong\u003e 865\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 41 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327607113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity is the Dexter 008-219-9G hub and drum kit rated for?\u003c\/strong\u003e The 008-219-9G is built for a 7,000 lb capacity axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does this hub kit use?\u003c\/strong\u003e The Dexter 008-219-9G uses 5\/8 inch wheel studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does EZ-Lube mean on this hub kit?\u003c\/strong\u003e EZ-Lube is a bearing protector system that lets grease be pumped through a zerk fitting into the hub without removing the bearings, so the 008-219-9G can be re-greased quickly during routine maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 008-219-9G hub and drum kit weigh?\u003c\/strong\u003e This kit weighs 41 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bearing bore diameter on this Dexter kit?\u003c\/strong\u003e The bearing and seal bore on the 008-219-9G is sized to 2.250 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing set is included with this kit?\u003c\/strong\u003e The Dexter 008-219-9G carries the 865 bearing set designation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 008-219-9G a complete hub and drum, or bearings only?\u003c\/strong\u003e It is a hub and drum kit, supplying the hub and drum assembly along with its associated bearing set rather than bearings alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter hub kit?\u003c\/strong\u003e The UPC for the 008-219-9G is 840327607113.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 008-219-9G genuine Dexter hardware?\u003c\/strong\u003e Yes, it is sold under its Dexter manufacturer part number, 008-219-9G.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit fit boat trailer axles?\u003c\/strong\u003e The 008-219-9G is sized for 7,000 lb capacity axles with 5\/8 inch studs, a configuration commonly used on boat trailer axles built to that spec.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256805595,"sku":"DEX-008-219-9G","price":391.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-E-Z-Lube-12-inch-7K-Hub--Drum-Kit-008-219-9G__75144.1747363834.500.750.jpg?v=1785329078"},{"product_id":"7-200-lb-trailer-hub-and-drum-kit-8-on-6-50-bolt-pattern-9-16-studs-grease-lube-mpn-008-393-91","title":"Dexter Trailer Hub Kit 008-393-91, 7,200 lb Capacity, 9\/16 Inch Studs, Grease Lubrication with Cone Nuts","description":"\u003cp\u003eThe Dexter 008-393-91 is a heavy-duty trailer hub kit rated for a 7,200 lb capacity, built for trailer axles using 9\/16 inch wheel studs on a 4.75 inch pitch diameter. It is a grease-lubricated hub kit, meaning the bearing cavity is packed and sealed for grease service rather than an oil-bath design, and the kit includes the cone nuts needed to secure the wheel to the hub. This kit is compatible with hub part number 008-393-04, making it a straightforward match for trailers already built around that hub.\u003c\/p\u003e\u003cp\u003eBecause it is sized for 7,200 lb capacity axles, this kit suits mid-to-heavy tandem and single-axle utility, boat, and cargo trailers running 9\/16 inch stud hubs. The grease lubrication design simplifies routine maintenance compared to oil-bath hubs, since service only requires repacking rather than monitoring an oil level or seal integrity for leaks. Installers replacing worn hub hardware or servicing a hub that takes 9\/16 inch studs at a 4.75 inch pitch diameter can use this kit to restore the wheel-mounting hardware to factory-rated capacity.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-393-91\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 7,200 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Diameter:\u003c\/strong\u003e 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubrication Type:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Cone nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 49.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCompatible with hub part number 008-393-04\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the Dexter 008-393-91 hub kit?\u003c\/strong\u003e The Dexter 008-393-91 hub kit is rated for a 7,200 pound capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stud size does this hub kit use?\u003c\/strong\u003e This kit is built for 9\/16 inch wheel studs on a 4.75 inch pitch diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 008-393-91 kit grease or oil lubricated?\u003c\/strong\u003e It is a grease-lubricated design, so the hub is packed and sealed for grease service rather than running as an oil bath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit come with cone nuts?\u003c\/strong\u003e Yes, cone nuts are included with the Dexter 008-393-91 hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub is the 008-393-91 kit compatible with?\u003c\/strong\u003e The 008-393-91 kit is compatible with hub part number 008-393-04.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 008-393-91 hub kit weigh?\u003c\/strong\u003e The kit weighs 49.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer axle is this hub kit suited for?\u003c\/strong\u003e Rated at 7,200 pounds capacity with 9\/16 inch studs, the 008-393-91 kit suits mid-to-heavy duty trailer axles built around that stud size and capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the pitch diameter matter when ordering this kit?\u003c\/strong\u003e The 4.75 inch pitch diameter of the 008-393-91 kit must match your existing hub so the studs and cone nuts line up correctly with the wheel bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used on an oil-bath hub?\u003c\/strong\u003e No, the 008-393-91 kit is designed for grease lubrication, not an oil-bath hub, so it should be matched to a hub built for grease service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Dexter 008-393-91 kit?\u003c\/strong\u003e The kit includes the hardware needed for a 9\/16 inch stud, 4.75 inch pitch diameter grease hub, including cone nuts, at a 7,200 pound capacity rating.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256871131,"sku":"DEX-008-393-91","price":488.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-8-on-6.5-7.2k-hub-drum-kit-post-1999-008-393-91__30616.1747363836.500.750.jpg?v=1785329093"},{"product_id":"dexter-023-105-09-12-x-2-6k-left-hand-electric-drum-brake-assembly-6-000-lb","title":"Dexter 12 Inch x 2 Inch 6000 lb Left Hand Electric Drum Brake Assembly - 023-105-09","description":"\u003cp\u003eThe Dexter 023-105-09 is a complete 12 inch x 2 inch electric drum brake assembly rated for 6,000 lb (6K) axle capacity, built for the left hand (LH) side of a trailer axle. This is a full brake assembly, not a repair kit, so it is intended for direct installation as a complete unit rather than a rebuild of an existing worn brake. Electric drum brakes of this type use a magnet-actuated shoe system that engages when the trailer's electric brake controller sends current to the magnet, drawing the shoes into contact with the drum for stopping power that is proportional to the controller's output. The 12 inch x 2 inch designation refers to the drum diameter and shoe width, which must match the trailer's hub and drum dimensions for correct fit. Because this is designated a left hand assembly, it is built for one specific side of the trailer axle; a right hand (RH) counterpart is sold as a separate, differently numbered assembly, so confirming the LH designation before ordering ensures the correct part arrives for the intended wheel position. The assembly weighs 14 pounds. Trailer owners and fleet maintenance operators use assemblies like this to replace a damaged, corroded, or failed brake unit on 6,000 lb rated axles where a full assembly swap is preferred over piecemeal part replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-105-09\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Drum Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 6,000 lbs (6K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327614067\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-105-09 a left or right side brake?\u003c\/strong\u003e The Dexter 023-105-09 is a left hand (LH) electric drum brake assembly, built for the left side of the trailer axle only. A right hand version is a separate part with a different part number, so confirm the LH designation before ordering to get the correct side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer drum does this brake fit?\u003c\/strong\u003e This assembly is sized for a 12 inch x 2 inch drum, meaning a 12 inch drum diameter and a 2 inch wide brake shoe, which is the Dexter 023-105-09 configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake rated for?\u003c\/strong\u003e The 023-105-09 is rated for 6,000 lb (6K) axle capacity, matching Dexter's 12 inch x 2 inch electric brake line for that load rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come as a complete assembly or just replacement shoes?\u003c\/strong\u003e This is a complete electric drum brake assembly, not a shoe-only repair kit, so the full unit is included for direct installation on the left side of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-105-09 weigh?\u003c\/strong\u003e The assembly weighs 14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does an electric drum brake like this one work?\u003c\/strong\u003e An electric drum brake uses a magnet mounted inside the assembly that is energized by the trailer's brake controller; when current flows to the magnet, it pulls the actuating arm to draw the shoes into the drum, and stopping force increases with the current the controller sends, which describes how the 023-105-09 assembly operates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this brake on a right hand hub position?\u003c\/strong\u003e No. The 023-105-09 is built specifically as a left hand assembly and should not be installed on a right hand hub position; a separate right hand Dexter part number is needed for that side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake assembly?\u003c\/strong\u003e The UPC for the Dexter 023-105-09 left hand electric drum brake assembly is 840327614067.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake assembly made by Dexter?\u003c\/strong\u003e Yes, this is a genuine Dexter brake assembly, part number 023-105-09.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trailer applications is a 12 inch x 2 inch 6K electric brake used on?\u003c\/strong\u003e A 12 inch x 2 inch 6,000 lb electric drum brake assembly such as the 023-105-09 is used on trailer axles rated for that 6K capacity where the hub and drum are sized to accept a 12 inch x 2 inch brake.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991256969435,"sku":"DEX-023-105-09","price":145.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_894b6ba7-e60c-4883-9b9f-2bfc854a60fa.jpg?v=1785349554"},{"product_id":"dexter-023-566-00-12-x-2-hydraulic-trailer-brake-assembly-6k-left-hand-manual-adjust-complete","title":"Dexter 023-566-00 12 x 2 Inch 6K Hydraulic Left Hand Trailer Drum Brake Assembly","description":"\u003cp\u003eThe Dexter 023-566-00 is a complete 12 x 2 inch hydraulic trailer drum brake assembly rated for 6,000 lb (6K) axle applications. This is the left hand (LH) side unit only, built for trailers using US-manufactured, manually adjusted drum brake hardware. As a complete assembly, it is designed to be installed as a full replacement unit rather than requiring separate purchase of individual internal components. The 12 inch drum diameter and 2 inch shoe width match the common 12 x 2 hydraulic brake platform used on 6,000 lb rated trailer axles, and the manual adjustment design allows the brake shoe clearance to be set and maintained through routine service. Because this unit is manufactured specifically for the left hand side of the trailer, it is not interchangeable with a right hand assembly; installing the correct side is required for proper brake function and even braking side to side. Trailer owners replacing worn-out or damaged hydraulic drum brakes on a 6K axle, or upgrading a trailer to a complete matched hydraulic brake set, can use this assembly as the left side component of that setup. Always confirm axle capacity, drum diameter, and side (left vs. Right) before ordering to ensure correct fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-566-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Complete Hydraulic Trailer Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShoe Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 6,000 pounds (6K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Manual adjust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e US-manufactured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151235110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-566-00 for the left or right side of the trailer?\u003c\/strong\u003e The Dexter 023-566-00 is a left hand (LH) side brake assembly only. It is not the same part as a right hand assembly, so make sure you are ordering the correct side for your axle position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is this?\u003c\/strong\u003e This is a 12 x 2 inch drum brake assembly, meaning a 12 inch drum diameter with 2 inch wide brake shoes, part number 023-566-00 from Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity is this brake rated for?\u003c\/strong\u003e The Dexter 023-566-00 is rated for 6,000 pounds (6K), matching the common capacity rating for 12 x 2 inch hydraulic trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a hydraulic or electric brake?\u003c\/strong\u003e It is a hydraulic brake assembly, not an electric brake, as indicated by the hydraulic actuation of the 023-566-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come as a complete assembly or just individual parts?\u003c\/strong\u003e The 023-566-00 is sold as a complete brake assembly, not individual components, so it is intended to be installed as a full replacement unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the brake shoe clearance adjusted on this unit?\u003c\/strong\u003e This Dexter brake assembly uses a manual adjust design, meaning shoe-to-drum clearance is set and maintained through manual adjustment rather than a self-adjusting mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-566-00 weigh?\u003c\/strong\u003e The complete assembly weighs 13.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this brake assembly manufactured?\u003c\/strong\u003e The Dexter 023-566-00 is a US-manufactured hydraulic trailer brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on a right side axle position?\u003c\/strong\u003e No. The 023-566-00 is built specifically for the left hand side; a right hand version would be a separate, differently numbered part, and using the wrong side will not seat or function correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer is this brake designed for?\u003c\/strong\u003e It is designed for trailers using 12 x 2 inch, 6,000 lb rated hydraulic drum brakes, part number 023-566-00 on the left hand side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Dexter 023-566-00 left hand hydraulic brake assembly is 106151235110.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257002203,"sku":"DEX-023-566-00","price":128.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_12d342fd-c9a9-442a-98bf-d8295ebf6dfb.jpg?v=1785349554"},{"product_id":"dexter-008-430-90-oil-hub-and-drum-kit-9k-10k-general-duty-trailer-axle-8-on-6-5in-5-8in-studs-with-cone-nuts","title":"Dexter 90 Degree Cone Nut 008-430-90 for Clamp Ring Hub Assemblies, 9,000-15,000 lb Axles","description":"\u003cp\u003eThe Dexter 90 Degree Cone Nut, part number 008-430-90, is the specified fastener for hub assemblies that use a clamp ring on Dexter medium duty trailer axles. It is designed to seat against the clamp ring to properly preload and retain the wheel bearings on one-piece hub assemblies. This cone nut is used on 9K, 10K, and #13G General Duty one-piece hubs within Dexter's medium duty axle line, which covers axle capacities from 9,000 to 15,000 pounds.\u003c\/p\u003e\u003cp\u003eWhen a clamp ring is present on the hub assembly, the 90 degree cone nut is the required fastener; the flange nut is only used as an alternate when a clamp ring is not part of the assembly. Selecting the correct nut for the hub configuration is important for proper bearing preload and safe hub operation. This part is sold as the genuine Dexter cone nut for these applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-430-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 90 Degree Cone Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Clamp Ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Fastener:\u003c\/strong\u003e Flange Nut (used when no clamp ring is present)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 9K, 10K, and #13G General Duty One-Piece Hubs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 9,000-15,000 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter medium duty trailer axles, 9,000-15,000 lb capacity, one-piece hub assemblies (9K, 10K, #13G General Duty) fitted with a clamp ring\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 008-430-90 cone nut used for?\u003c\/strong\u003e The Dexter 008-430-90 is a 90 degree cone nut used to retain and preload the wheel bearings on hub assemblies that include a clamp ring on Dexter medium duty trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a clamp ring to use this cone nut?\u003c\/strong\u003e Yes. The 90 degree cone nut, part number 008-430-90, is specified for use with a clamp ring; if the hub assembly does not have a clamp ring, a flange nut is used as the alternate fastener instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a flange nut instead of the 008-430-90 cone nut?\u003c\/strong\u003e A flange nut is only the correct alternate fastener when there is no clamp ring on the hub assembly. Where a clamp ring is present, the Dexter 90 degree cone nut 008-430-90 must be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity range is this cone nut rated for?\u003c\/strong\u003e The Dexter 008-430-90 cone nut is used within Dexter's medium duty axle line, covering axle capacities of 9,000 to 15,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub types does the 008-430-90 cone nut fit?\u003c\/strong\u003e This cone nut is used on 9K, 10K, and #13G General Duty one-piece hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 008-430-90 a genuine Dexter part?\u003c\/strong\u003e Yes, part number 008-430-90 is a genuine Dexter 90 degree cone nut for one-piece hub assemblies with a clamp ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cone nut affect bearing preload?\u003c\/strong\u003e The 90 degree cone nut, 008-430-90, seats against the clamp ring on the hub assembly to properly preload and retain the wheel bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cone nut work on a one-piece hub without a clamp ring?\u003c\/strong\u003e The 008-430-90 cone nut is specified for one-piece hubs that include a clamp ring; hubs without a clamp ring instead use a flange nut as the alternate fastener.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257034971,"sku":"DEX-008-430-90","price":790.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-8-on-6.5-9k-10k-hub-drum-kit-2009-and-newer-008-430-90__47432.1747363836.500.750.jpg?v=1785329081"},{"product_id":"dexter-12-x-2-6k-electric-trailer-brake-assembly-right-hand-complete-backing-plate-with-park-mpn-023-106-09","title":"Dexter 12 x 2 Inch Right Hand Electric Drum Brake Assembly, 6,000 lb Capacity (023-106-09)","description":"\u003cp\u003eThe Dexter 023-106-09 is a 12 inch x 2 inch right hand (RH) electric drum brake assembly rated for 6,000 pounds. This is the electric brake unit itself, the core braking component used to build out a trailer axle's electric brake system, and it is designated specifically for the right-hand side of the trailer. Because it is a side-specific part, it is not interchangeable with the left hand version, which is sold under its own separate part number.\u003c\/p\u003e\u003cp\u003eThis brake assembly is the right hand (RH) component used in Dexter's complete 12 inch x 2 inch electric brake assembly with parking brake, 6,000 lb kit (kit K23-112-00), which combines the RH electric brake, a hex nut, a plug, and an instruction sheet into a full installation set. Ordering the 023-106-09 assembly on its own is intended for replacement of just the brake unit rather than the full kit's hardware.\u003c\/p\u003e\u003cp\u003eElectric drum brakes like this one work by using an electromagnet mounted to the backing plate that engages the brake drum when the trailer's electric brake controller applies current, producing consistent, controllable stopping power that scales with the amount of current applied. This makes them a common choice for trailer axles rated in the 6,000 lb range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-106-09\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 6,000 pounds (6K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric drum brake assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327614081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Application:\u003c\/strong\u003e Component of Dexter's complete 12 inch x 2 inch electric brake assembly with parking brake, 6,000 lb (kit K23-112-00)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-106-09 a right hand or left hand brake?\u003c\/strong\u003e The 023-106-09 is a right hand (RH) electric drum brake assembly. It is not interchangeable with the left hand side, which Dexter sells as a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size trailer brake is this?\u003c\/strong\u003e This is a 12 inch x 2 inch electric drum brake assembly, part number 023-106-09.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is the 023-106-09 rated for?\u003c\/strong\u003e 6,000 pounds (6K), matching Dexter's 12 x 2 electric brake assembly rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake assembly weigh?\u003c\/strong\u003e The Dexter 023-106-09 electric drum brake assembly weighs 13.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the parking brake hardware and mounting hex nut?\u003c\/strong\u003e The 023-106-09 is the electric brake assembly only. Dexter also offers it as part of a complete kit (K23-112-00) that bundles the right hand brake assembly with a hex nut, a plug, and an instruction sheet for a full 12 x 2 electric brake assembly with parking brake, 6,000 lb setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 023-106-09 on the left side of my trailer?\u003c\/strong\u003e No. The 023-106-09 is designated right hand (RH); the left hand brake assembly is a different Dexter part number, so make sure to order the correct side for each end of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an electric brake or hydraulic brake?\u003c\/strong\u003e The Dexter 023-106-09 is an electric drum brake assembly, designed to work with a trailer's electric brake controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The Dexter 12 x 2 right hand electric drum brake assembly (023-106-09) has UPC 840327614081.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 023-106-09 genuine Dexter equipment?\u003c\/strong\u003e Yes, the 023-106-09 is a genuine Dexter part, Dexter's own manufacturer part number for this 12 x 2, 6,000 lb right hand electric drum brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 023-106-09?\u003c\/strong\u003e Ordering 023-106-09 gets you the right hand electric drum brake assembly itself; it does not include the additional hardware (hex nut, plug, instruction sheet) that ships with Dexter's full K23-112-00 kit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257067739,"sku":"DEX-023-106-09","price":145.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_0138aba1-792b-4f95-8d9c-aff1b2606d42.jpg?v=1785349554"},{"product_id":"dexter-040-419-00-hydraulic-front-brake-shoe-10-x-2-1-4-trailer-brake-shoe","title":"Dexter 10 x 2-1\/4 Inch Hydraulic Front Trailer Brake Shoe, Part 040-419-00","description":"\u003cp\u003eThe Dexter 040-419-00 is a hydraulic trailer brake shoe sized 10 x 2-1\/4 inches and designated for the front position. It is manufactured by Dexter, a supplier of trailer axle and brake components, and is built to fit the dimensional specification of a 10 x 2-1\/4 inch hydraulic brake assembly. Because trailer brake shoes must match both the drum diameter and shoe width exactly to seat and actuate correctly, ordering by the correct size and position (front vs. Rear) is essential for proper brake function. This shoe weighs 1.5 pounds. Use it when servicing or rebuilding a hydraulic trailer brake assembly that calls for a 10 x 2-1\/4 inch front shoe bearing Dexter part number 040-419-00.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040-419-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Brake Shoe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter 040-419-00 brake shoe?\u003c\/strong\u003e The Dexter 040-419-00 is sized 10 x 2-1\/4 inches, matching the drum diameter and shoe width it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 040-419-00 shoe for the front or rear position?\u003c\/strong\u003e This shoe is designated for the front position. If you need a shoe for the rear position, that is a separate Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this shoe work with hydraulic or electric trailer brakes?\u003c\/strong\u003e Part number 040-419-00 is a hydraulic brake shoe, built for hydraulic trailer brake assemblies rather than electric brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040-419-00 brake shoe weigh?\u003c\/strong\u003e It weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand manufactures part 040-419-00?\u003c\/strong\u003e Part number 040-419-00 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this shoe?\u003c\/strong\u003e The manufacturer part number is 040-419-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 040-419-00 a genuine Dexter part or an aftermarket copy?\u003c\/strong\u003e It is a genuine Dexter part, manufactured by Dexter under part number 040-419-00, not a third-party aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the front\/rear position matter when ordering this shoe?\u003c\/strong\u003e The Dexter 040-419-00 is built specifically for the front position; installing a front shoe where a rear shoe is required (or vice versa) can affect fit, so confirm position before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 10 x 2-1\/4 inch size need to match my existing shoes exactly?\u003c\/strong\u003e Yes, the 040-419-00 is sized 10 x 2-1\/4 inches, and this dimension must match your brake assembly's drum diameter and shoe width for a correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake assembly is the 040-419-00 shoe used in?\u003c\/strong\u003e The 040-419-00 is a hydraulic front brake shoe, used as a component in a 10 x 2-1\/4 inch hydraulic trailer brake assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257100507,"sku":"DEX-040-419-00","price":28.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_ec61c5fc-18b1-4aa0-a053-d4e0bf618948.jpg?v=1785349554"},{"product_id":"dexter-040-402-00-hydraulic-trailer-brake-shoe-8-1-2-in-x-2-1-4-in-free-backing","title":"Dexter 8-1\/2 x 2-1\/4 Inch Hydraulic Brake Shoe, Free Backing","description":"\u003cp\u003eThis Dexter hydraulic brake shoe is sized 8-1\/2 x 2-1\/4 inches and is designated Free Backing, part number 040-402-00. It is built for trailer axle hydraulic brake assemblies that use this shoe size, giving trailer owners a direct replacement shoe when relining or rebuilding a hydraulic drum brake. The shoe carries the Dexter part number 040-402-00 for straightforward reordering, and at 1.1 pounds it is sized for a single shoe unit rather than a full axle set, so buyers should confirm how many shoes their brake assembly requires before ordering. As a Dexter-branded component, it is manufactured to the dimensional specification (8-1\/2 x 2-1\/4 inches) that Dexter hydraulic brake systems of this shoe size are built around. This part is intended for use in servicing existing Dexter hydraulic brake assemblies where the shoe size matches 8-1\/2 x 2-1\/4 inches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040-402-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 8-1\/2 x 2-1\/4 Hydraulic Shoe, Free Backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShoe Size:\u003c\/strong\u003e 8-1\/2 x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Free Backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151123590\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this Dexter brake shoe?\u003c\/strong\u003e The Dexter hydraulic brake shoe, part number 040-402-00, is sized 8-1\/2 x 2-1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 040-402-00 brake shoe weigh?\u003c\/strong\u003e This Dexter hydraulic brake shoe weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 040-402-00 is a genuine Dexter branded hydraulic brake shoe, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Free Backing mean for this shoe?\u003c\/strong\u003e Free Backing is part of the product designation for Dexter shoe 040-402-00, identifying this specific shoe configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the part number 040-402-00 apply to a single shoe or a full set?\u003c\/strong\u003e Part number 040-402-00 is listed at 1.1 pounds, consistent with a single 8-1\/2 x 2-1\/4 inch shoe unit; check how many shoes your brake assembly needs before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake shoe?\u003c\/strong\u003e The UPC for the Dexter 8-1\/2 x 2-1\/4 hydraulic shoe, Free Backing (040-402-00), is 106151123590.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I identify the correct replacement shoe for my Dexter hydraulic brakes?\u003c\/strong\u003e Match the shoe dimensions to 8-1\/2 x 2-1\/4 inches, the size of Dexter part 040-402-00, to confirm it is the correct replacement for your assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this shoe be used to rebuild an existing hydraulic drum brake?\u003c\/strong\u003e Yes, the Dexter 040-402-00 hydraulic shoe is intended for servicing and rebuilding hydraulic drum brake assemblies that use the 8-1\/2 x 2-1\/4 inch shoe size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 040-402-00 the manufacturer part number I should use to order?\u003c\/strong\u003e Yes, 040-402-00 is the Dexter manufacturer part number to reference when ordering this 8-1\/2 x 2-1\/4 inch hydraulic shoe.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257329883,"sku":"DEX-040-402-00","price":48.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-040-402-00__89408.1780061500.500.750.jpg?v=1785329081"},{"product_id":"10-in-x-2-1-4-in-hydraulic-free-backing-drum-brake-assembly-left-hand-3-500-lb-axle-mpn-023-544-00","title":"Dexter 023-544-00 Hydraulic Trailer Drum Brake Assembly, Left Hand, 10 x 2-1\/4 Inch, 3.5K","description":"\u003cp\u003eThe Dexter 023-544-00 is a complete hydraulic trailer drum brake assembly built for the left-hand (driver's) side of a trailer axle. It measures 10 inches in diameter by 2-1\/4 inches thick and carries a 44 square inch pad lining area, sized for a 3.5K axle application. The assembly is finished in black paint and is manually adjustable, arriving as a complete, ready-to-mount unit rather than a kit of loose parts.\u003c\/p\u003e\u003cp\u003eThis drum brake is designed for use with hydraulic brake actuators that do not include a reverse lockout, since the assembly itself allows the trailer to be backed up without actuating the brake. The 3 inch center hole diameter and overall design suit trailers running 13, 14, or 15 inch wheels. Because it is a left-hand assembly, it is intended for the driver's side of the trailer only; the right-hand (passenger's side) counterpart is a separate part number and should not be substituted for this one.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-544-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Trailer Drum Brake Assembly, Complete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (Driver's Side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad Lining Area:\u003c\/strong\u003e 44 square inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Hole Diameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size Compatibility:\u003c\/strong\u003e 13, 14, or 15 inch wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Rating:\u003c\/strong\u003e 3.5K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Manual adjust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black-painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.58 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailers using a 3.5K axle with 13, 14, or 15 inch wheels\u003c\/li\u003e\n\u003cli\u003eHydraulic brake actuators without a built-in reverse lockout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-544-00 a left-side or right-side brake assembly?\u003c\/strong\u003e The 023-544-00 is a left-hand assembly, meaning it mounts on the driver's side of the trailer. The passenger's (right-hand) side uses a different Dexter part number, so be sure to order the correct side for each end of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is this?\u003c\/strong\u003e The Dexter 023-544-00 measures 10 inches in diameter by 2-1\/4 inches thick, with a 3 inch center hole diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes does this brake assembly work with?\u003c\/strong\u003e This brake assembly is sized to fit trailers running 13, 14, or 15 inch wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the 023-544-00 rated for?\u003c\/strong\u003e The Dexter 023-544-00 is built for a 3.5K axle application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake come fully assembled?\u003c\/strong\u003e Yes, the 023-544-00 is a complete hydraulic drum brake assembly, not a kit of individual components, so it arrives ready to mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I back up my trailer without the brakes engaging?\u003c\/strong\u003e Yes. This drum brake design allows the trailer to be reversed without the brake actuating, which is needed when your hydraulic brake actuator does not include a reverse lockout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pad lining area on this brake assembly?\u003c\/strong\u003e The Dexter 023-544-00 has a 44 square inch pad lining area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake assembly self-adjusting?\u003c\/strong\u003e No, the 023-544-00 uses a manual adjustment, not a self-adjusting mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-544-00 weigh?\u003c\/strong\u003e This brake assembly weighs 9.58 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this drum brake have?\u003c\/strong\u003e The 023-544-00 has a black-painted finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a hydraulic or electric brake assembly?\u003c\/strong\u003e The 023-544-00 is a hydraulic drum brake assembly, intended for use with hydraulic brake actuators.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257362651,"sku":"DEX-023-544-00","price":110.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/811wBu8s50L.jpg?v=1784498177"},{"product_id":"dexter-12-x-2-hydraulic-trailer-drum-brake-assembly-6-000-lb-right-hand-manual-adjust-complete-mpn-023-567-00","title":"Dexter 12 x 2 Inch 6K Hydraulic Right Hand Trailer Drum Brake Assembly with Manual Adjuster, 023-567-00","description":"\u003cp\u003eThe Dexter 023-567-00 is a complete 12 inch x 2 inch hydraulic drum brake assembly built for 6,000 pound capacity trailer axles. This is the right hand unit, engineered with a manual adjuster rather than a self-adjusting mechanism, so brake shoe clearance is set by hand as the linings wear. As a complete assembly, it is supplied ready to mount to the axle backing plate, eliminating the need to source individual internal components separately.\u003c\/p\u003e\u003cp\u003eHydraulic drum brakes of this type are the primary service brake on many single and tandem axle trailers rated at or near 6,000 pounds, converting hydraulic line pressure from the trailer's master cylinder or actuator into mechanical clamping force against the brake drum. The 12 x 2 inch shoe sizing refers to the drum diameter and shoe width this assembly is designed to work within. Because this is a side-specific part, it is not interchangeable with the left hand version of the same assembly, which carries a different Dexter part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-567-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brake Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 6,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation Type:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjuster Type:\u003c\/strong\u003e Manual Adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Type:\u003c\/strong\u003e Complete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 106151231000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size drum brake is the Dexter 023-567-00?\u003c\/strong\u003e It is a 12 inch x 2 inch hydraulic drum brake assembly, sized for 6,000 pound capacity trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a left or right side brake assembly?\u003c\/strong\u003e The Dexter 023-567-00 is the right hand assembly. The left hand version of this 12 x 2 inch, 6K hydraulic brake is a separate Dexter part number and the two are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake use a self-adjusting mechanism?\u003c\/strong\u003e No. The Dexter 023-567-00 uses a manual adjuster, meaning brake shoe clearance is set by hand rather than automatically as the linings wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-567-00 a complete brake assembly?\u003c\/strong\u003e Yes, it is sold as a complete assembly, so all of the internal hydraulic brake components for the right hand side are included as one unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake assembly weigh?\u003c\/strong\u003e The Dexter 023-567-00 weighs 13.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake rated for?\u003c\/strong\u003e This Dexter drum brake assembly is rated for 6,000 pound (6K) capacity trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake hydraulic or electric?\u003c\/strong\u003e The 023-567-00 is a hydraulic drum brake assembly, actuated by hydraulic line pressure rather than an electric brake controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this Dexter brake assembly?\u003c\/strong\u003e The UPC for the Dexter 023-567-00 right hand hydraulic drum brake assembly is 106151231000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this on the left side of my trailer?\u003c\/strong\u003e No. The 023-567-00 is manufactured specifically as the right hand assembly; installing it on the left side would not correctly fit, since Dexter produces the left hand version as a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 12 x 2 mean for this brake?\u003c\/strong\u003e 12 x 2 describes the brake's drum diameter and shoe width dimensions, in inches, for the Dexter 023-567-00 assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257395419,"sku":"DEX-023-567-00","price":128.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_6186a882-ff08-4294-8383-0617b19dedf6.jpg?v=1785349559"},{"product_id":"dexter-10-x-2-1-4-hydraulic-free-backing-trailer-brake-assembly-right-hand-3-500-lb-axle-fits-13-14-15-wheels-023-499-00","title":"Dexter 023-499-00 10 Inch Left Hand Hydraulic Trailer Drum Brake Assembly","description":"\u003cp\u003eThe Dexter 023-499-00 is a complete 10 inch hydraulic trailer drum brake assembly built for the left-hand (driver's) side of the trailer axle. It is designed to work with hydraulic brake actuators that do not include a reverse lockout, so the assembly can reverse freely without the actuator engaging the brakes. The unit measures 10 inches wide and 2-1\/4 inches thick, with a 3 inch center hole diameter and 44 square inches of pad lining area for consistent stopping power. It fits most trailers running 13 inch, 14 inch, or 15 inch wheels, making it a common replacement across a range of boat, utility, and cargo trailer axles. The assembly comes with a black-painted finish for corrosion resistance during outdoor and marine trailer use.\u003c\/p\u003e\u003cp\u003eBecause this is a left-hand assembly, it must be paired with a separate right-hand assembly (a different part number) for the opposite side of the axle -- installing the wrong side will not seat or actuate correctly. This complete assembly simplifies replacement by supplying the full brake unit rather than individual components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-499-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left hand (driver's side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Hole Diameter:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad Lining Area:\u003c\/strong\u003e 44 square inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size Compatibility:\u003c\/strong\u003e 13 inch, 14 inch, or 15 inch wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black-painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Hydraulic drum brake assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.43 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-499-00 a left or right side brake assembly?\u003c\/strong\u003e The Dexter 023-499-00 is a left-hand (driver's side) hydraulic trailer drum brake assembly. The right-hand side of the axle requires a separate assembly with a different part number, so be sure to order the matching side for the passenger\/curb side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel sizes does this drum brake assembly fit?\u003c\/strong\u003e This 10 inch hydraulic drum brake assembly fits trailers running 13 inch, 14 inch, or 15 inch wheels, covering a wide range of common trailer wheel sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pad lining area on the 023-499-00 brake assembly?\u003c\/strong\u003e The pad lining area is 44 square inches, which is the braking surface used to generate stopping power on the 10 inch drum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-499-00 drum brake assembly weigh?\u003c\/strong\u003e This complete drum brake assembly weighs 9.43 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this brake assembly be used with a hydraulic actuator that has a reverse lockout?\u003c\/strong\u003e No. The Dexter 023-499-00 is designed for hydraulic brake actuators that do not include a reverse lockout, allowing the trailer to be backed up without the actuator engaging the brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this drum brake assembly?\u003c\/strong\u003e The Dexter 023-499-00 measures 10 inches wide and 2-1\/4 inches thick, with a 3 inch center hole diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 023-499-00 come as a complete assembly or individual parts?\u003c\/strong\u003e It is sold as a complete hydraulic drum brake assembly, not individual replacement components, simplifying installation on the left side of the trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this trailer brake assembly have?\u003c\/strong\u003e The assembly has a black-painted finish, intended to help resist corrosion in outdoor and marine trailer environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 023-499-00 suitable for boat trailers?\u003c\/strong\u003e Yes, this 10 inch hydraulic drum brake assembly is commonly used on boat, utility, and cargo trailers that use 13, 14, or 15 inch wheels and a hydraulic surge brake system without reverse lockout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the center hole diameter of this drum brake?\u003c\/strong\u003e The center hole diameter on the Dexter 023-499-00 drum brake assembly is 3 inches.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257428187,"sku":"DEX-023-499-00","price":71.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/811wBu8s50L_143d8b5c-519c-456e-9f7f-df967f755ef7.jpg?v=1784498181"},{"product_id":"10-in-x-2-1-4-in-3-500-lb-hydraulic-drum-brake-assembly-right-hand-complete-dexter-023-609-00","title":"Dexter 10 x 2-1\/4 Inch Hydraulic Trailer Brake Assembly, Right Hand, 3.5K, Manual Adjust - 023-609-00","description":"\u003cp\u003eThe Dexter 023-609-00 is a complete 10 x 2-1\/4 inch hydraulic trailer brake assembly built for the right-hand (RH) side of a 3,500 lb (3.5K) rated trailer axle. This is a full brake assembly rather than a single component, so it is intended as a direct replacement for a worn or damaged right-hand hydraulic brake on trailers within the Dexter 3.5K brake size family.\u003c\/p\u003e\u003cp\u003eThis unit uses a manual-adjust design, meaning brake shoe clearance is set by hand rather than through a self-adjusting mechanism, so periodic manual adjustment is part of normal maintenance for this brake. It is designated specifically for the right-hand side of the trailer; it is not interchangeable with a left-hand brake, which is a separate part.\u003c\/p\u003e\u003cp\u003eBecause this is sold as a complete assembly, it is intended to simplify replacement by supplying the full 10 x 2-1\/4 inch hydraulic brake unit in one part rather than requiring separate sourcing of individual components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 023-609-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 023-609-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 10 x 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3,500 lb (3.5K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Manual Adjust (US Man Adj)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Type:\u003c\/strong\u003e Complete assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.76 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits trailer axles using the Dexter 10 x 2-1\/4 inch, 3,500 lb hydraulic brake size on the right-hand side only.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 023-609-00 a complete brake assembly or a single part?\u003c\/strong\u003e The 023-609-00 is sold as a complete 10 x 2-1\/4 inch hydraulic trailer brake assembly, not a single individual component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake fit the left or right side of the trailer?\u003c\/strong\u003e This is the right-hand (RH) specific brake assembly. It is not for left-hand installation; the left-hand version is a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is the Dexter 023-609-00 rated for?\u003c\/strong\u003e It is rated for 3,500 lb (3.5K) trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a hydraulic or electric trailer brake?\u003c\/strong\u003e The 023-609-00 is a hydraulic brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake shoes does the 023-609-00 use?\u003c\/strong\u003e It is built in the 10 x 2-1\/4 inch brake size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter 023-609-00 self-adjust?\u003c\/strong\u003e No. It uses a manual-adjust design, so brake shoe clearance must be set by hand rather than automatically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 023-609-00 weigh?\u003c\/strong\u003e The complete assembly weighs 8.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the right-hand 023-609-00 be installed on both sides of the trailer?\u003c\/strong\u003e No. It is designated for the right-hand side only and should not be used in place of a left-hand brake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of trailer part is the 023-609-00?\u003c\/strong\u003e It falls under trailer drum brakes, specifically as a complete hydraulic brake assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs routine maintenance required on the Dexter 023-609-00?\u003c\/strong\u003e Yes. Because it uses a manual-adjust mechanism, periodic manual adjustment of the brake shoes is part of normal upkeep.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257460955,"sku":"DEX-023-609-00","price":110.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_0f525339-dbca-4410-8de7-929766fdbdc4.jpg?v=1785349559"},{"product_id":"dexter-046-032-00-rubber-plug-for-oil-cap-fits-dexter-6-bolt-utility-hubs-2-5-8-12-thread","title":"Dexter Rubber Plug for Oil Cap, Fits 6 Bolt and Utility Hubs 2-5\/8-12 Thread","description":"\u003cp\u003eThis rubber plug is the replacement plug for the oil cap on Dexter trailer hubs, sold individually to service the oil-fill opening on the hub oil cap. It seals the fill port on Dexter 6 bolt and utility hubs, and is sized for the 2-5\/8 inch-12 thread oil cap used on those hubs. This plug is one of the components included in the Dexter Oil Cap, O-Ring \u0026amp; Plug Kit (K71-747-00), which also includes an O-ring and the oil cap itself, so it is a straightforward way to replace a lost, cracked, or worn plug without buying a full new cap assembly. Keeping the oil cap plug in good condition helps maintain a proper seal on the hub, which supports correct lubrication and helps keep water and debris out of the bearing area. Because it is made of rubber, it seats snugly in the cap opening and can be removed and reinserted for periodic oil level checks or topping off. This is a genuine Dexter part, so it matches the fit and thread specification of the original equipment cap rather than requiring a universal or adapted plug.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046-032-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Rubber Plug for Oil Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 2-5\/8 inch-12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter 6 bolt and utility hubs, 2-5\/8 inch-12 thread\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Dexter part 046-032-00?\u003c\/strong\u003e Dexter 046-032-00 is a rubber plug that fits into the oil cap on Dexter trailer hubs, sealing the oil-fill opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hubs does this plug fit?\u003c\/strong\u003e This plug fits Dexter 6 bolt and utility hubs that use a 2-5\/8 inch-12 thread oil cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this plug sold as part of a kit or individually?\u003c\/strong\u003e Dexter 046-032-00 can be purchased on its own as a replacement rubber plug, and it is also one of the components in the Dexter Oil Cap, O-Ring \u0026amp; Plug Kit, K71-747-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat else comes in the Oil Cap, O-Ring \u0026amp; Plug Kit?\u003c\/strong\u003e The kit that includes this rubber plug (046-032-00) also includes an O-ring (010-050-00) and the oil cap itself (021-036-00).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the plug made of?\u003c\/strong\u003e The Dexter 046-032-00 plug is made of rubber, which allows it to seat snugly in the oil cap opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e Dexter part 046-032-00 weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this plug?\u003c\/strong\u003e If the rubber plug on a Dexter hub oil cap is lost, cracked, or no longer sealing properly, 046-032-00 is the correct replacement part rather than replacing the entire oil cap assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this plug work with any trailer hub, or only Dexter hubs?\u003c\/strong\u003e This rubber plug is a Dexter part designed specifically for Dexter 6 bolt and utility hubs with a 2-5\/8 inch-12 thread oil cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, 046-032-00 is a genuine Dexter rubber plug, matching the fit and thread specification of the original equipment oil cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is the oil cap this plug fits?\u003c\/strong\u003e The oil cap that this plug fits uses a 2-5\/8 inch-12 thread, per Dexter's specification for 6 bolt and utility hubs.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257526491,"sku":"DEX-046-032-00","price":1.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_046-032-00_Rubber_Plug_For_Oil_Cap-side-view__93004.1741891216.500.750.jpg?v=1785329091"},{"product_id":"dexter-054-156-00-hydraulic-wheel-cylinder-push-rod-for-trailer-brake-actuators","title":"Dexter Hydraulic Wheel Cylinder Push Rod 054-156-00 for Trailer Brake Actuators","description":"\u003cp\u003eThe Dexter 054-156-00 is a hydraulic wheel cylinder push rod used in trailer brake actuator assemblies. The push rod is the mechanical link between the hydraulic wheel cylinder piston and the brake shoe, transferring the force generated by hydraulic pressure into the mechanical movement that applies the brake shoe against the drum. As the actuator builds hydraulic pressure, the push rod extends to press the shoe outward; when pressure releases, it retracts to allow the shoe to return to its resting position.\u003c\/p\u003e\u003cp\u003eThis is a lightweight component at 0.07 pounds, sized to fit within the wheel cylinder bore and actuator housing of the trailer brake assembly it is designed for. Because push rods see repeated cyclic loading every time the brakes are applied, replacing a worn, bent, or corroded push rod with the correct Dexter part helps maintain proper shoe engagement and consistent braking performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 054-156-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 054-156-00 used for?\u003c\/strong\u003e It is a hydraulic wheel cylinder push rod, part number 054-156-00, used inside a trailer brake actuator to transfer force from the wheel cylinder piston to the brake shoe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this push rod weigh?\u003c\/strong\u003e The Dexter push rod 054-156-00 weighs 0.07 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 054-156-00?\u003c\/strong\u003e Part number 054-156-00 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is this?\u003c\/strong\u003e This item is listed under trailer brake actuators, since the push rod is a component within that assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does a wheel cylinder push rod work?\u003c\/strong\u003e The push rod extends when hydraulic pressure builds in the wheel cylinder, pressing the brake shoe outward against the drum, and retracts as pressure releases so the shoe returns to its resting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this push rod?\u003c\/strong\u003e A push rod that is worn, bent, or corroded can prevent proper shoe engagement, so replacing it with the Dexter 054-156-00 helps restore consistent brake actuator performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 054-156-00 the correct part number to order?\u003c\/strong\u003e Yes, 054-156-00 is the Dexter part number for this hydraulic wheel cylinder push rod.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this push rod come with mounting hardware?\u003c\/strong\u003e The listing covers the Dexter 054-156-00 push rod itself; no additional hardware is specified.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257592027,"sku":"DEX-054-156-00","price":3.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-0978300_lg__37977.1558140294.500.750.jpg?v=1785329085"},{"product_id":"dexter-068-011-00-master-cylinder-bracket-assembly-right-hand-primered","title":"Dexter Master Cylinder Bracket Assembly, Right Hand, Primered - Part 068-011-00","description":"\u003cp\u003eThe Dexter Bracket Assy M\/C RH (part number 068-011-00) is a right-hand master cylinder mounting bracket for trailer brake actuator systems. This bracket provides the mounting structure that positions and secures the master cylinder on the right-hand side of the actuator assembly, giving the hydraulic brake components a stable, correctly aligned base. It ships with a primered finish, meaning it is coated with primer as a base layer rather than a final paint or plated finish, so it is ready to be top-coated or painted to match the rest of the trailer running gear if desired.\u003c\/p\u003e\u003cp\u003eThis is a right-hand specific bracket. It is designed for the right side of the actuator assembly only and is not interchangeable with a left-hand bracket, which is sold under its own separate Dexter part number. Always confirm you are ordering the correct side before installing, since installing the wrong side will not allow the master cylinder to mount correctly.\u003c\/p\u003e\u003cp\u003eAs a Dexter component, this bracket is intended for use in trailer brake actuator repair and rebuild work, where a bracket has become bent, corroded, or damaged and needs to be replaced with a properly fitted OEM part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-011-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Master Cylinder Bracket Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Primered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.78 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 068-011-00 bracket for the right or left side?\u003c\/strong\u003e Part 068-011-00 is the right-hand (RH) master cylinder bracket. The left-hand version of this bracket is a separate Dexter part number, so check which side your actuator needs before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this bracket do?\u003c\/strong\u003e It is the mounting bracket that holds and positions the master cylinder on the right-hand side of a trailer brake actuator assembly, part number 068-011-00 from Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the 068-011-00 bracket come in?\u003c\/strong\u003e It has a primered finish, meaning it is coated with a base primer rather than a final paint or plating, so it can be painted or top-coated after installation if desired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-011-00 bracket weigh?\u003c\/strong\u003e This bracket weighs 1.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this bracket myself?\u003c\/strong\u003e The 068-011-00 bracket is a direct-mount replacement bracket, so it can typically be installed by removing the old bracket from the actuator assembly and bolting the new one in its place using the existing hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill using the wrong side bracket work if I only need a temporary fix?\u003c\/strong\u003e No. Because 068-011-00 is machined and positioned specifically for the right-hand side, using it in place of a left-hand bracket will not allow the master cylinder to mount or align correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 068-011-00 is a genuine Dexter master cylinder bracket assembly, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bracket used with?\u003c\/strong\u003e The 068-011-00 bracket is used as part of a trailer brake actuator assembly, providing the mounting point for the actuator's master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the primered finish need to be painted before use?\u003c\/strong\u003e The primered finish on the 068-011-00 bracket protects the metal and can be used as-is, but it can also be top-coated with paint to match other running gear components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with this part?\u003c\/strong\u003e This listing includes the Dexter 068-011-00 right-hand master cylinder bracket assembly itself.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257657563,"sku":"DEX-068-011-00","price":42.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_d5b7ec19-321a-4a61-bb31-37e22fe95e68.jpg?v=1785349554"},{"product_id":"dexter-068-012-00-master-cylinder-mounting-bracket-assembly-left-hand-primered","title":"Dexter Left-Hand Master Cylinder Bracket Assembly, Primered - 068-012-00","description":"\u003cp\u003eThe Dexter 068-012-00 is a left-hand (LH) master cylinder bracket assembly used in trailer brake actuator setups. It provides the mounting structure that positions and secures the master cylinder on the left side of the actuator assembly, and it comes with a primered finish, ready for paint or further coating to match the trailer or actuator housing. This bracket is designed as a replacement or service part for trailer brake actuator systems, allowing an owner or installer to restore proper master cylinder mounting on the left-hand side without replacing the entire actuator assembly.\u003c\/p\u003e\u003cp\u003eBecause this is a left-hand specific bracket, it is not interchangeable with a right-hand bracket; the two sides are separate parts, so it is important to confirm that a left-hand bracket is what your actuator assembly requires before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-012-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Bracket Assy M\/C Lh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left Hand (LH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Primered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.78 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-012-00?\u003c\/strong\u003e The Dexter 068-012-00 is a left-hand (LH) master cylinder bracket assembly used in trailer brake actuator systems, providing the mounting point for the master cylinder on the left side of the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bracket for the left or right side of the actuator?\u003c\/strong\u003e This is a left-hand (LH) specific bracket assembly, part number 068-012-00. It is not designed for right-hand mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 068-012-00 be used on the right-hand side instead?\u003c\/strong\u003e No. The Dexter 068-012-00 is designated left-hand (LH) only; a right-hand bracket would be a separate part number, so the left-hand and right-hand brackets are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this bracket come with?\u003c\/strong\u003e The Dexter 068-012-00 bracket assembly ships with a primered finish, so it is ready for paint or an additional protective coating before or after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-012-00 bracket weigh?\u003c\/strong\u003e This bracket assembly weighs 1.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer system is the 068-012-00 used with?\u003c\/strong\u003e The Dexter 068-012-00 is categorized as a trailer brake actuator part, specifically a master cylinder mounting bracket for the actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 068-012-00 a complete master cylinder or just a bracket?\u003c\/strong\u003e It is the bracket assembly only (Bracket Assy M\/C Lh), which mounts and supports the master cylinder on the left-hand side; it is not the master cylinder itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the primered finish need to be painted before use?\u003c\/strong\u003e The primered finish on the Dexter 068-012-00 is a base coat intended for further paint or coating, though it can also be left as-is depending on the installation environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 068-012-00 an OEM Dexter part?\u003c\/strong\u003e Yes, 068-012-00 is the Dexter manufacturer part number for this left-hand master cylinder bracket assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 068-012-00?\u003c\/strong\u003e Ordering the Dexter 068-012-00 gets you the left-hand master cylinder bracket assembly with its primered finish, as described by this part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257690331,"sku":"DEX-068-012-00","price":42.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_5ca606e6-6535-4df6-8fea-8e5fe1b5758f.jpg?v=1785349559"},{"product_id":"adjuster-spring-for-dexter-10-x-2-1-4-and-12-x-2-electric-trailer-brakes-no-parking-mpn-046-018-00","title":"Dexter Adjuster Spring 046-018-00, Red, for 10 x 2-1\/4 Inch and 12 x 2 Inch Electric Brakes","description":"\u003cp\u003eThe Dexter Adjuster Spring, part number 046-018-00, is a replacement brake spring used on Dexter electric trailer brake assemblies. This spring is finished in red and is sized to fit Dexter 10 inch x 2-1\/4 inch and 12 inch x 2 inch electric brakes without the parking feature. It functions as part of the brake adjuster mechanism, helping maintain proper spring tension so the brake shoes hold their adjustment and operate consistently.\u003c\/p\u003e\u003cp\u003eThis adjuster spring is also supplied as one of the components in the Dexter Brake Spring Kit, alongside the Shoe Hold Down Spring Cup (046-077-00), Retractor Spring (046-084-00), and Magnet Spring (046-175-00), which together restore full spring tension to a Dexter 10 x 2-1\/4 inch or 12 x 2 inch electric brake assembly without parking feature. Buyers replacing worn or corroded brake springs on Dexter trailer brakes can use this part individually or alongside the other kit components for a complete spring refresh.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046-018-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Description:\u003c\/strong\u003e Spring, Adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327619352\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Dexter 10 x 2-1\/4 inch and 12 x 2 inch electric brakes without parking feature\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDexter 10 inch x 2-1\/4 inch electric brakes without parking feature\u003c\/li\u003e\n\u003cli\u003eDexter 12 inch x 2 inch electric brakes without parking feature\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat brakes does the Dexter 046-018-00 adjuster spring fit?\u003c\/strong\u003e The Dexter 046-018-00 adjuster spring fits Dexter 10 inch x 2-1\/4 inch and 12 inch x 2 inch electric brakes without the parking feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this adjuster spring?\u003c\/strong\u003e Dexter part number 046-018-00 is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 046-018-00 adjuster spring weigh?\u003c\/strong\u003e It weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this spring sold individually or only as part of a kit?\u003c\/strong\u003e The Dexter 046-018-00 Adjuster Spring is available on its own and is also one of the components included in the Dexter Brake Spring Kit for 10 x 2-1\/4 inch and 12 x 2 inch electric brakes without parking feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other springs are included in the Dexter Brake Spring Kit that uses this part?\u003c\/strong\u003e The kit that includes the 046-018-00 Adjuster Spring also contains the 046-077-00 Shoe Hold Down Spring Cup, the 046-084-00 Retractor Spring, and the 046-175-00 Magnet Spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this spring work on brakes with a parking feature?\u003c\/strong\u003e No. The Dexter 046-018-00 adjuster spring is designed for 10 x 2-1\/4 inch and 12 x 2 inch electric brakes without the parking feature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the function of the adjuster spring on a Dexter electric brake?\u003c\/strong\u003e The 046-018-00 adjuster spring provides tension within the brake adjuster mechanism, helping the brake shoes hold their adjustment during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 046-018-00 spring genuine Dexter or aftermarket?\u003c\/strong\u003e Part number 046-018-00 is a genuine Dexter replacement part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The Dexter Adjuster Spring, part number 046-018-00, has UPC 840327619352.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this spring fit a 12 inch x 2 inch trailer brake?\u003c\/strong\u003e Yes, the 046-018-00 adjuster spring fits Dexter 12 inch x 2 inch electric brakes without parking feature, as well as the 10 inch x 2-1\/4 inch size.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257723099,"sku":"DEX-046-018-00","price":0.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_046-018-00_Adjuster_Spring_12x2_EL_10x2-1-4_EL_HYD_Red__68007.1747363801.500.750.jpg?v=1785329081"},{"product_id":"dexter-046-052-00-oil-filler-plug-for-8-000-lb-oil-lube-trailer-hubs-rubber-fill-hole-plug","title":"Dexter Oil Filler Plug 046-052-00, Rubber, Trailer Hub Oil Bath Service Part","description":"\u003cp\u003eThe Dexter 046-052-00 is a rubber oil filler plug designed to seal the oil fill hole on Dexter trailer axle hub oil bath assemblies. This plug is sold as a service part only, meaning it is available as an individual replacement component rather than as part of a full hub kit -- ideal for trailer owners and service techs who need to replace a worn, cracked, or missing filler plug without purchasing an entire hub assembly.\u003c\/p\u003e\u003cp\u003eThe plug is made of rubber, which allows it to seat and seal securely in the fill hole to help keep the oil bath lubricant contained within the hub and keep contaminants out. Its compact size keeps it lightweight for easy handling and storage as a spare part. Because it is a genuine Dexter part identified by number 046-052-00, it is built to the same dimensions as the original equipment plug it replaces on applicable Dexter oil bath hub assemblies.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 046-052-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e Oil Filler Plug (service part only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327619413\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Service part (sold individually)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 046-052-00?\u003c\/strong\u003e It is a rubber oil filler plug that seals the oil fill hole on a Dexter trailer axle hub oil bath assembly, part number 046-052-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sold as a full hub kit or an individual part?\u003c\/strong\u003e The 046-052-00 is listed as a service part only, meaning it is sold individually as a replacement plug rather than bundled with a full hub kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the plug made of?\u003c\/strong\u003e The 046-052-00 filler plug is made of rubber, which allows it to seat and seal against the fill hole opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the plug weigh?\u003c\/strong\u003e The Dexter oil filler plug 046-052-00 weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, 046-052-00 is the Dexter manufacturer part number for this oil filler plug, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this plug do on a trailer hub?\u003c\/strong\u003e It seals the oil fill opening on a Dexter oil bath hub assembly, helping keep the oil lubricant inside the hub and contaminants out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the listing include a gasket or O-ring?\u003c\/strong\u003e The 046-052-00 is the filler plug itself; no gasket or O-ring is included with this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this plug on any trailer hub?\u003c\/strong\u003e Confirm your hub uses a Dexter oil bath assembly designed for the 046-052-00 filler plug before ordering, since fitment varies by hub design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I identify the UPC for this part?\u003c\/strong\u003e The Dexter 046-052-00 oil filler plug carries UPC 840327619413.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the oil filler plug instead of the whole hub?\u003c\/strong\u003e Because 046-052-00 is offered as a standalone service part, a worn or damaged plug can be replaced on its own without buying a complete hub assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257755867,"sku":"DEX-046-052-00","price":2.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter_046-052-00_Rubber_Plug_For_Oil_Fill_Hole__57856.1747363802.500.750.jpg?v=1785329089"},{"product_id":"dexter-040-421-00-hydraulic-rear-trailer-brake-shoe-10-in-x-2-1-4-in","title":"Dexter 10 x 2 1\/4 Inch Hydraulic Rear Brake Shoe, Part 040-421-00","description":"\u003cp\u003eThis is the Dexter 10 x 2 1\/4 inch hydraulic rear brake shoe, part number 040-421-00, sized for trailer brake assemblies that use a 10 inch by 2 1\/4 inch hydraulic drum brake. As a rear-position shoe, it is designed to work as part of a hydraulic drum brake assembly on axles built to this size, providing the friction surface that presses against the drum to slow and stop the trailer. Trailer brake shoes are wear items that require periodic replacement as the friction material thins with use, and matching the correct size and hydraulic actuation type is essential for the brake assembly to function correctly and safely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 040-421-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 inches x 2 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuation Type:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.66 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dexter 040-421-00 brake shoe?\u003c\/strong\u003e The Dexter 040-421-00 is a 10 inch by 2 1\/4 inch brake shoe, sized for hydraulic drum brake assemblies built to that dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a front or rear brake shoe?\u003c\/strong\u003e Part number 040-421-00 is a rear brake shoe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 040-421-00 shoe work with hydraulic or electric brakes?\u003c\/strong\u003e It is a hydraulic brake shoe, designed for hydraulically actuated drum brake assemblies rather than electric brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 040-421-00 brake shoe weigh?\u003c\/strong\u003e This brake shoe weighs 1.66 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 040-421-00?\u003c\/strong\u003e Part number 040-421-00 is manufactured by Dexter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this shoe fit a 10 x 2 1\/4 inch front hydraulic brake assembly?\u003c\/strong\u003e No, the 040-421-00 is designated as a rear shoe; a front-position shoe would be a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my trailer brake shoes need replacing?\u003c\/strong\u003e Brake shoes like the Dexter 040-421-00 are wear items, and thinning friction material, reduced stopping power, or visible wear on the shoe surface are signs it is time to replace them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Dexter 040-421-00?\u003c\/strong\u003e This listing is for the 10 x 2 1\/4 inch hydraulic rear brake shoe itself, part number 040-421-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the 040-421-00 brake shoe myself?\u003c\/strong\u003e Replacing a trailer brake shoe such as the Dexter 040-421-00 involves disassembling the hydraulic drum brake assembly, and installers should follow the brake manufacturer's service procedure to ensure correct fit and safe operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 040-421-00 shoe genuine Dexter or aftermarket?\u003c\/strong\u003e The 040-421-00 is a genuine Dexter part, identified by its Dexter manufacturer part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257788635,"sku":"DEX-040-421-00","price":46.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_363bf5f5-1e4a-41d4-96dd-e44792fdbf86.jpg?v=1785349559"},{"product_id":"model-60-surge-actuator-shock-absorber-damper-oem-2336200-fits-titan-dico-model-60-trailer-brake-actuators-mpn-053-012-00","title":"Dexter Damper Model 60 Trailer Brake Actuator Shock Absorber, Zinc-Plated Steel","description":"\u003cp\u003eThe Dexter Damper Model 60 is the shock absorber component for Model 60 surge actuators, engineered to smooth out braking pulses and reduce shock loading on the trailer's brake linkage during towing. It is built from durable steel with a zinc-plated finish that resists corrosion in the wet, road-spray conditions trailer actuators are routinely exposed to. This damper is sold as an individual replacement part; the surrounding actuator housing, linkage, and other hardware are sold separately. It fits Titan and Dico Model 60 Actuators, extending to 6-1\/4 inches and collapsing to 4-15\/16 inches, matching the working range of the original damper it replaces. At 1.08 pounds, it is a straightforward drop-in replacement for a worn or seized shock absorber, restoring proper surge-brake actuation without requiring replacement of the entire actuator assembly. Because it is manufactured to the same dimensions and material specification as the unit it replaces, it installs in place of the original damper on compatible Model 60 actuators. This part is intended for trailer owners and service shops replacing a single worn component rather than rebuilding the full surge actuator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 053-012-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Trailer Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Length:\u003c\/strong\u003e 6-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsed Length:\u003c\/strong\u003e 4-15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuators:\u003c\/strong\u003e Titan and Dico Model 60 Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTitan Model 60 Actuators\u003c\/li\u003e\n\u003cli\u003eDico Model 60 Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Damper Model 60 used for?\u003c\/strong\u003e It is the shock absorber component of a Model 60 surge actuator, absorbing braking pulses so the trailer's surge brakes actuate smoothly instead of jerking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators does part number 053-012-00 fit?\u003c\/strong\u003e The Dexter Damper Model 60 is designed to fit Titan and Dico Model 60 Actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the damper made of?\u003c\/strong\u003e It is made of durable steel with a zinc-plated finish, which resists corrosion from road spray and wet towing conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the extended and collapsed lengths of this damper?\u003c\/strong\u003e The Dexter Damper Model 60 measures 6-1\/4 inches extended and 4-15\/16 inches collapsed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter Damper Model 60 weigh?\u003c\/strong\u003e It weighs 1.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this damper work on Dico Model 60 actuators, or only Titan?\u003c\/strong\u003e Yes, the 053-012-00 damper is compatible with both Titan and Dico Model 60 Actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come with the rest of the surge actuator hardware?\u003c\/strong\u003e No, only the damper (shock absorber) is included; other Model 60 actuator components are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct replacement for a worn actuator damper?\u003c\/strong\u003e Yes, the Dexter Damper Model 60 is built to the dimensions and material specification of the original damper it replaces, allowing it to install in place of a worn unit on a compatible Model 60 actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this damper resist rust after repeated exposure to water?\u003c\/strong\u003e The zinc-plated steel construction of the 053-012-00 damper is intended to resist corrosion during normal towing and launch exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I order to replace my surge actuator's damper?\u003c\/strong\u003e Order Dexter part number 053-012-00, the Damper Model 60, if your surge actuator is a Titan or Dico Model 60.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257821403,"sku":"DEX-053-012-00","price":69.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-2336200_lg__11649.1558114135.500.750.jpg?v=1785188279"},{"product_id":"master-cylinder-for-model-60-aero-7500-actuators-1-25-in-bore-drum-brake-dexter-068-085-00","title":"Dexter Master Cylinder Assembly, 1.25 Inch Bore, for Model 60 Actuator and Aero 7500 Actuator","description":"\u003cp\u003eThis is the Dexter master cylinder assembly (part number 068-085-00), a 1.25 inch bore drum-brake master cylinder built for use with the Model 60 actuator and the Aero 7500 actuator. The master cylinder is the core hydraulic component inside a surge brake actuator: when the tow vehicle brakes and the actuator compresses, this cylinder converts that mechanical force into hydraulic pressure, sending fluid through the brake lines to apply the trailer's drum brakes. Because it is sized specifically to the Model 60 and Aero 7500 actuator bodies, it is intended as a direct replacement inside those units rather than a universal part.\u003c\/p\u003e\u003cp\u003eOrdering the correct bore size matters for proper brake feel and stopping power, and this unit is specified at a 1.25 inch bore to match its intended actuators. It ships as the master cylinder only, for installation into an existing Model 60 or Aero 7500 actuator housing during a rebuild or repair.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-085-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Master Cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore Size:\u003c\/strong\u003e 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuators:\u003c\/strong\u003e Model 60 Actuator, Aero 7500 Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Drum brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel 60 Actuator\u003c\/li\u003e\n\u003cli\u003eAero 7500 Actuator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators does the Dexter 068-085-00 master cylinder fit?\u003c\/strong\u003e The Dexter 068-085-00 master cylinder is built for use with the Model 60 actuator and the Aero 7500 actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bore size of this master cylinder?\u003c\/strong\u003e This Dexter master cylinder has a 1.25 inch bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the full actuator assembly?\u003c\/strong\u003e No, part number 068-085-00 is the master cylinder only, intended for installation inside an existing Model 60 or Aero 7500 actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brakes does this master cylinder work with?\u003c\/strong\u003e It is a drum brake master cylinder, designed to generate hydraulic pressure for a trailer's drum brake system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-085-00 master cylinder weigh?\u003c\/strong\u003e It weighs 3.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this master cylinder work with any surge actuator?\u003c\/strong\u003e No, the 068-085-00 is sized specifically for the Model 60 and Aero 7500 actuators, so it should be matched to one of those units rather than used as a universal fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the master cylinder in my actuator?\u003c\/strong\u003e A worn or leaking master cylinder inside a Model 60 or Aero 7500 actuator can cause soft brakes or fluid loss, and replacing it with the Dexter 068-085-00 restores proper hydraulic function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, part number 068-085-00 is a Dexter-branded master cylinder assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the bore size affect braking performance?\u003c\/strong\u003e Yes, bore size determines the hydraulic pressure and fluid volume the master cylinder produces, which is why the 1.25 inch bore of the 068-085-00 should match the actuator it is installed in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this myself or does it require a mechanic?\u003c\/strong\u003e Installing the Dexter 068-085-00 master cylinder involves opening the actuator housing and connecting hydraulic lines, a job that is commonly done by anyone comfortable rebuilding a trailer brake actuator, though a professional can also perform it.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257854171,"sku":"DEX-068-085-00","price":118.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2336100042_1__74526.1558140719.500.750.jpg?v=1785189169"},{"product_id":"dexter-model-60-m-c-gasket-mpn-068-091-00","title":"Dexter Gasket for Model 60 Master Cylinder, Part 068-091-00","description":"\u003cp\u003eThis is the Dexter gasket for the Model 60 master cylinder, part number 068-091-00. It is a replacement sealing gasket sized for the Model 60 master cylinder assembly used in Dexter trailer brake systems, and it is intended to be installed between the master cylinder body and its mating surface to maintain a proper seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-091-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Master Cylinder Model:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter Model 60 master cylinder\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo cross-reference numbers available for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat master cylinder does Dexter part 068-091-00 fit?\u003c\/strong\u003e Dexter gasket 068-091-00 is designed for the Model 60 master cylinder used in Dexter trailer brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 068-091-00 a genuine Dexter part?\u003c\/strong\u003e Yes, 068-091-00 is a genuine Dexter part number for the Model 60 master cylinder gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this gasket weigh?\u003c\/strong\u003e The Dexter Model 60 master cylinder gasket, part 068-091-00, weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of this gasket?\u003c\/strong\u003e This gasket seals the Model 60 master cylinder assembly to help maintain a proper seal at the mating surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gasket come with mounting hardware?\u003c\/strong\u003e This listing is for the gasket only, Dexter part 068-091-00, for the Model 60 master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this gasket sold individually?\u003c\/strong\u003e Yes, Dexter part 068-091-00 is sold as a single gasket for the Model 60 master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gasket work with other master cylinder models?\u003c\/strong\u003e Dexter part 068-091-00 is made for the Model 60 master cylinder; compatibility with other master cylinder models is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 068-091-00 gasket made from?\u003c\/strong\u003e Material details for Dexter part 068-091-00 are not specified in available product information.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my master cylinder needs this gasket replaced?\u003c\/strong\u003e A worn or damaged gasket on a Model 60 master cylinder can lead to fluid seepage at the mating surface; replacing it with Dexter part 068-091-00 restores the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 068-091-00 the part number I should search for at checkout?\u003c\/strong\u003e Yes, 068-091-00 is the Dexter part number to reference when ordering this Model 60 master cylinder gasket.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257886939,"sku":"DEX-068-091-00","price":2.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-091-00__12036.1780061499.500.750.jpg?v=1785329084"},{"product_id":"dexter-hand-wheel-lock-068-088-00-model-60-plated-coupler-lock","title":"Dexter Multi-Fit Hand Wheel Lock, Model 60, Plated Finish","description":"\u003cp\u003eThe Dexter Multi-Fit Hand Wheel Lock, Model 60, is a plated hand wheel lock designed to secure a trailer coupler's hand wheel against unauthorized use. Its multi-fit design allows it to work across a range of trailer coupler hand wheels rather than a single fixed size, making it a practical choice for trailer owners who want a straightforward, no-frills locking accessory. The plated finish is intended to help the lock resist the elements typical of trailer and towing environments.\u003c\/p\u003e\u003cp\u003eThis is a lightweight, compact accessory at just 0.01 pounds, sized to mount directly onto the hand wheel of a compatible trailer coupler without adding meaningful bulk or weight to the tow setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-088-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Multi-Fit (fits multiple hand wheel couplers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Multi-Fit Hand Wheel Lock used for?\u003c\/strong\u003e It is a hand wheel lock, Dexter part number 068-088-00, designed to secure a trailer coupler's hand wheel against unauthorized use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lock made to fit only one trailer coupler model?\u003c\/strong\u003e No, the Dexter 068-088-00 is a Multi-Fit design, meaning it is made to work across multiple trailer coupler hand wheels rather than a single specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the Dexter Model 60 hand wheel lock have?\u003c\/strong\u003e The Dexter 068-088-00 hand wheel lock has a plated finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter 068-088-00 hand wheel lock weigh?\u003c\/strong\u003e It weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat model number is this Dexter hand wheel lock?\u003c\/strong\u003e This hand wheel lock is Dexter's Model 60, part number 068-088-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter Multi-Fit Hand Wheel Lock a genuine Dexter part?\u003c\/strong\u003e Yes, part number 068-088-00 is a genuine Dexter Model 60 hand wheel lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the Dexter 068-088-00 hand wheel lock mount?\u003c\/strong\u003e It mounts onto the hand wheel of a compatible trailer coupler to lock it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 068-088-00?\u003c\/strong\u003e Part number 068-088-00 is manufactured by Dexter.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257919707,"sku":"DEX-068-088-00","price":2.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-088-00__48599.1780061499.500.750.jpg?v=1785329089"},{"product_id":"master-cylinder-cover-for-model-60-actuator-plated-steel-replacement-cap-mpn-068-093-00","title":"Dexter Master Cylinder Cover, Model 60, Plated Finish - Part 068-093-00","description":"\u003cp\u003eThis is a genuine Dexter master cylinder cover, part number 068-093-00, built for the Dexter Model 60 master cylinder. It seals the top of the master cylinder reservoir, keeping brake fluid contained and protected from contamination while allowing the internal diaphragm to do its job as fluid level changes during brake operation. The cover carries a plated finish, which helps it resist corrosion in the wet, splash-prone environment typical of trailer brake systems near axles and wheels.\u003c\/p\u003e\u003cp\u003eAt 0.2 pounds, this is a small, simple replacement part meant for anyone servicing or rebuilding a Dexter Model 60 master cylinder assembly. Ordering the correct cover by its Dexter part number ensures a proper fit on the Model 60 housing rather than guessing with a generic or universal cover.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-093-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Master Cylinder Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Dexter part 068-093-00?\u003c\/strong\u003e Dexter part 068-093-00 is a master cylinder cover for the Dexter Model 60 master cylinder, which fits over the reservoir to keep brake fluid contained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich master cylinder does this cover fit?\u003c\/strong\u003e This cover, Dexter part 068-093-00, is designed for the Dexter Model 60 master cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the cover weigh?\u003c\/strong\u003e The Dexter 068-093-00 master cylinder cover weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the cover have?\u003c\/strong\u003e It has a plated finish, which helps the Dexter 068-093-00 cover resist corrosion in the wet conditions common around trailer brake components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, 068-093-00 is a genuine Dexter master cylinder cover, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a master cylinder cover do?\u003c\/strong\u003e On the Dexter Model 60 master cylinder, the cover 068-093-00 seals the top of the fluid reservoir, protecting the brake fluid from contamination while accommodating fluid level changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know I am ordering the right cover?\u003c\/strong\u003e Match the Dexter part number 068-093-00 to your existing Model 60 master cylinder to be sure the replacement cover fits correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cover include a gasket or diaphragm?\u003c\/strong\u003e This listing is for the master cylinder cover itself, Dexter part 068-093-00; a separate gasket or diaphragm is not specified as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this cover on a non-Dexter master cylinder?\u003c\/strong\u003e The 068-093-00 cover is made to fit the Dexter Model 60 master cylinder, so fit on other brands is not confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the cover straightforward?\u003c\/strong\u003e Yes, the Dexter 068-093-00 cover is a direct-fit replacement that installs onto the Model 60 master cylinder reservoir in place of the original cover.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257985243,"sku":"DEX-068-093-00","price":9.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-093-00__50249.1780061499.500.750.jpg?v=1785329087"},{"product_id":"leverlock-handle-assembly-with-lanyard-mpn-068-143-00","title":"Dexter Leverlock Handle Assembly with Lanyard 068-143-00","description":"\u003cp\u003eThe Dexter Leverlock Handle Assembly, part number 068-143-00, is the handle component used to operate a Dexter leverlock mechanism. The assembly comes complete with a lanyard attached to the handle, keeping it tethered and preventing loss during use. This is a genuine Dexter replacement part, sold as a direct-fit assembly for the leverlock hardware it is designed for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-143-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Lanyard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter part number for this leverlock handle assembly?\u003c\/strong\u003e The part number is 068-143-00, and it is a genuine Dexter handle assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Dexter Leverlock Handle Assembly 068-143-00 include a lanyard?\u003c\/strong\u003e Yes, this handle assembly comes with a lanyard attached, so the handle stays tethered in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter Leverlock Handle Assembly weigh?\u003c\/strong\u003e It weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 068-143-00 a genuine Dexter part or an aftermarket copy?\u003c\/strong\u003e Part number 068-143-00 is a genuine Dexter Leverlock Handle Assembly, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the handle in this Dexter assembly connect to?\u003c\/strong\u003e It is the handle component of a Dexter leverlock mechanism, used to operate the leverlock hardware it is installed on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 068-143-00?\u003c\/strong\u003e The Dexter Leverlock Handle Assembly 068-143-00 includes the handle assembly and its attached lanyard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes the 068-143-00 handle assembly?\u003c\/strong\u003e Dexter manufactures this leverlock handle assembly, part number 068-143-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the lanyard on the 068-143-00 handle assembly be replaced separately?\u003c\/strong\u003e The lanyard ships attached to the Dexter 068-143-00 handle assembly as a complete unit.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258018011,"sku":"DEX-068-143-00","price":74.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-143-00_2__47175.1780061499.500.750.jpg?v=1785329087"},{"product_id":"titan-model-10-bolt-on-drum-brake-actuator-2-5-16-ball-12-500-lb-gvwr-zinc-plated-mpn-068-104-00","title":"Dexter Model 10 Drum Brake Actuator, Bolt-On 2.313 Inch Drop, 2-5\/16 Inch Ball, 068-104-00","description":"\u003cp\u003eThe Dexter Model 10 Drum Brake Actuator (068-104-00) is a bolt-on drum brake actuator built with a 2.313 inch drop and a zinc plated finish for corrosion resistance. It is designed to work with a 2-5\/16 inch ball coupler and is rated for 12,500 pounds GVWR with an 800 pound tongue load capacity, making it suited to heavier single and tandem axle trailers that use surge (hydraulic) drum brakes.\u003c\/p\u003e\u003cp\u003eMounting holes are spaced on 3 inch and 5 inch centers front to back, matching the standard Model 10 bolt pattern for straightforward installation onto compatible trailer tongues. The zinc plating protects the actuator housing from rust and road salt exposure, extending service life in wet trailering conditions. This actuator functions as the surge brake mechanism that converts the trailer's forward push against the tow vehicle into hydraulic pressure applied to the drum brakes, providing reliable stopping power when towing at or near the rated capacity.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-104-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Drum Brake Actuator, Model 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e 2.313 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupler Ball Size:\u003c\/strong\u003e 2-5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Capacity (GVWR):\u003c\/strong\u003e 12,500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTongue Load Rating:\u003c\/strong\u003e 800 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing:\u003c\/strong\u003e 3 inches and 5 inches, front to back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 55.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-104-00 actuator rated for?\u003c\/strong\u003e The Dexter Model 10 Drum Brake Actuator (068-104-00) is rated for 12,500 pounds GVWR with an 800 pound tongue load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size ball coupler does this actuator use?\u003c\/strong\u003e This actuator is built for a 2-5\/16 inch ball coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 068-104-00 actuator weigh?\u003c\/strong\u003e The Dexter 068-104-00 Model 10 actuator weighs 55.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the drop measurement on this actuator?\u003c\/strong\u003e The Model 10 actuator has a 2.313 inch drop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Dexter Model 10 actuator mounted?\u003c\/strong\u003e It is a bolt-on actuator with mounting holes spaced on 3 inch and 5 inch centers, front to back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish protects this actuator from corrosion?\u003c\/strong\u003e The 068-104-00 actuator has a zinc plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter Model 10 actuator compatible with drum brakes?\u003c\/strong\u003e Yes, this is a drum brake actuator designed to actuate hydraulic surge drum brakes on a trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of trailer brake system uses this actuator?\u003c\/strong\u003e The 068-104-00 is a surge brake actuator, which converts the trailer's forward momentum against the tow vehicle into hydraulic pressure for the drum brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this actuator include the coupler and safety chains?\u003c\/strong\u003e The 068-104-00 listing covers the Model 10 drum brake actuator unit itself, built around a 2-5\/16 inch ball coupler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trailer weight range is this actuator suited for?\u003c\/strong\u003e With a 12,500 pound GVWR and 800 pound tongue load rating, the Dexter Model 10 actuator suits heavier single and tandem axle trailers with hydraulic drum brakes.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258050779,"sku":"DEX-068-104-00","price":924.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-2478100_lg__68927.1558114286.500.750.jpg?v=1785188591"},{"product_id":"roller-for-model-60-replacement-roller-mpn-068-347-00","title":"Dexter Roller for Model 60, Part 068-347-00","description":"\u003cp\u003eThe Dexter Roller (part number 068-347-00) is a replacement roller designed for use with Dexter Model 60. It is offered as a genuine Dexter component for buyers who need to replace a worn or damaged roller on their Model 60 unit rather than sourcing a generic substitute. Using the correct manufacturer part number helps ensure the roller matches the fit and function of the original equipment it is replacing.\u003c\/p\u003e\u003cp\u003eThis roller is a lightweight, compact component at 0.1 pounds, consistent with a small internal or mechanical part rather than a structural piece. Because it is sold under the Dexter brand and identified by its own dedicated part number, it can be ordered with confidence that it corresponds to the Model 60 application it is listed for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-347-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Model:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter Model 60\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Dexter part number 068-347-00?\u003c\/strong\u003e 068-347-00 is the Dexter manufacturer part number for a roller designed for use with Dexter Model 60.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this roller a genuine Dexter part?\u003c\/strong\u003e Yes, roller 068-347-00 is a genuine Dexter component, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does roller 068-347-00 weigh?\u003c\/strong\u003e This Dexter roller weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this roller used with?\u003c\/strong\u003e Roller 068-347-00 is used with Dexter Model 60.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure I am ordering the correct roller?\u003c\/strong\u003e Confirm the part number 068-347-00 and that your unit is a Dexter Model 60 before ordering, since Dexter uses distinct part numbers for different models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the Dexter branded roller instead of a generic one?\u003c\/strong\u003e The Dexter roller, part 068-347-00, is manufactured by Dexter specifically for the Model 60, which helps ensure correct fit compared to an unbranded generic roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs roller 068-347-00 a replacement part?\u003c\/strong\u003e Yes, 068-347-00 is sold as a replacement roller for Dexter Model 60.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the roller come as a single piece?\u003c\/strong\u003e Roller 068-347-00 is listed and sold as a single roller component under its own Dexter part number.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258083547,"sku":"DEX-068-347-00","price":1.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-347-00__31509.1780061499.500.750.jpg?v=1785329090"},{"product_id":"dexter-model-60-hydraulic-brake-actuator-7-000-lb-lever-lock-coupler-for-disc-brakes-with-solenoid-and-cover-mpn-068-196-05","title":"Dexter Model 60 Hydraulic Brake Actuator, 7,000 lb Disc Brake, Lever Lock, Plated, Solenoid and Cover, Part 068-196-05","description":"\u003cp\u003eThe Dexter Model 60 hydraulic brake actuator is rated for a 7,000 pound capacity and is configured for disc brake systems, making it a common choice for boat trailers and other trailered equipment using disc brakes. This unit includes the lever lock feature, which lets the operator lock out the actuator's surge function to prevent unwanted brake activation while backing the trailer up. It has a plated finish for corrosion resistance, and this version comes complete with the breakaway solenoid and protective cover included, so the actuator arrives ready to be installed as a complete assembly rather than requiring the solenoid to be sourced separately. As a Dexter part, it is identified by the manufacturer part number 068-196-05.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-196-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Model 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type Compatibility:\u003c\/strong\u003e Disc brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Type:\u003c\/strong\u003e Lever lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Solenoid and cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Model 60 actuator rated for?\u003c\/strong\u003e The Dexter Model 60 hydraulic brake actuator, part number 068-196-05, is rated for a 7,000 pound capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator for disc or drum brakes?\u003c\/strong\u003e This Dexter Model 60 actuator (068-196-05) is configured for disc brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the actuator include the solenoid?\u003c\/strong\u003e Yes, this version of the Dexter Model 60 actuator, part 068-196-05, includes the breakaway solenoid and a protective cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the lever lock feature do?\u003c\/strong\u003e The lever lock on the Dexter Model 60 actuator lets the operator manually lock out the actuator's surge function, which prevents the brakes from engaging while backing the trailer up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this actuator weigh?\u003c\/strong\u003e The Dexter Model 60 actuator, part number 068-196-05, weighs 21.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part?\u003c\/strong\u003e Yes, this is a genuine Dexter Model 60 actuator identified by Dexter manufacturer part number 068-196-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the actuator have?\u003c\/strong\u003e This Dexter Model 60 actuator has a plated finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat model of Dexter actuator is this?\u003c\/strong\u003e This is the Dexter Model 60 hydraulic brake actuator, part number 068-196-05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with part 068-196-05?\u003c\/strong\u003e Part 068-196-05 is a complete Dexter Model 60 actuator assembly that includes the lever lock feature, solenoid, and cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a cover included with this actuator?\u003c\/strong\u003e Yes, the protective cover is included with this Dexter Model 60 actuator, part 068-196-05.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258116315,"sku":"DEX-068-196-05","price":443.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DEX-068-196-05__53655.1780061500.500.750.jpg?v=1785329088"},{"product_id":"dexter-068-350-00-orifice-connector-0-016-1-8-mnpt-to-3-16-inverted-flare-brake-line-fitting","title":"Dexter Orifice Connector 0.016, 1\/8 Inch MNPT to 3\/16 Inch Inverted Flare Female, Trailer Drum Brake Fitting","description":"\u003cp\u003eThis Dexter orifice connector is a hydraulic fitting used in trailer drum brake systems to regulate brake fluid flow between the brake actuator and the wheel brake lines. It features a 0.016 inch orifice that meters fluid delivery, along with a 1\/8 inch MNPT (male national pipe thread) connection on one end and a 3\/16 inch female inverted flare fitting on the other. This combination allows the connector to join a pipe-threaded fluid line to a standard 3\/16 inch inverted-flare brake line, a common configuration in trailer surge brake and hydraulic brake plumbing.\u003c\/p\u003e\u003cp\u003eThe orifice connector is a small, precisely sized fitting designed to maintain consistent brake performance by controlling the rate of fluid flow through the line. It is intended for use as a direct replacement or repair component when servicing trailer brake hydraulic lines. Its compact size and light weight make it easy to install in tight spaces along the trailer frame or near the axle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-350-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Orifice Connector 0.016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection 1:\u003c\/strong\u003e 1\/8 inch MNPT (male national pipe thread)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection 2:\u003c\/strong\u003e 3\/16 inch female inverted flare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrifice Size:\u003c\/strong\u003e 0.016 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Drum Brakes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-350-00 orifice connector used for?\u003c\/strong\u003e The Dexter 068-350-00 is a hydraulic fitting used in trailer drum brake systems to control the rate of brake fluid flow between brake lines, connecting a 1\/8 inch MNPT threaded line to a 3\/16 inch inverted flare line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size orifice does this connector have?\u003c\/strong\u003e This connector has a 0.016 inch orifice, which meters the fluid flow through the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread and fitting types does the 068-350-00 use?\u003c\/strong\u003e One end is 1\/8 inch MNPT (male national pipe thread) and the other end is a 3\/16 inch female inverted flare fitting, allowing it to join two different brake line connection types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter orifice connector weigh?\u003c\/strong\u003e The Dexter 068-350-00 orifice connector weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this connector compatible with standard trailer surge brake systems?\u003c\/strong\u003e Yes, the 1\/8 inch MNPT to 3\/16 inch inverted flare configuration is a common connection type used in trailer surge and hydraulic drum brake plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 068-350-00 be used as a replacement part?\u003c\/strong\u003e Yes, this Dexter orifice connector is designed for use as a replacement or repair fitting when servicing trailer drum brake hydraulic lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the orifice connector come with any additional hardware?\u003c\/strong\u003e The Dexter 068-350-00 is sold as a single fitting; no additional hardware is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does a trailer brake line need an orifice connector?\u003c\/strong\u003e An orifice connector like the Dexter 068-350-00 meters brake fluid flow through the line, which helps maintain consistent, controlled brake actuation in the trailer's hydraulic system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Dexter 068-350-00 a genuine Dexter part?\u003c\/strong\u003e Yes, the 068-350-00 is manufactured by Dexter as part number 068-350-00.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258149083,"sku":"DEX-068-350-00","price":7.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dic-1209800_lg__72774.1558140413.500.750.jpg?v=1785329089"},{"product_id":"dexter-068-213-00-backup-solenoid-valve-and-hardware-kit-for-disc-brake-trailer-actuators","title":"Dexter Backup Solenoid Valve 068-213-00 for Disc Brake Actuators","description":"\u003cp\u003eThe Dexter Backup Solenoid Valve, part number 068-213-00, is a backup solenoid valve built for disc brake actuators on trailers. It functions as a lockout valve within the actuator's hydraulic circuit, and is supplied as part of a kit that includes the valve along with its associated hardware. This component is intended for use with disc brake actuator systems that rely on a solenoid-controlled backup valve to manage hydraulic pressure during reverse operation.\u003c\/p\u003e\u003cp\u003eThe valve is a compact, lightweight component at 0.46 pounds, making it straightforward to handle during service or replacement work on a trailer's brake actuator assembly. It is identified by UPC 876983015092 for easy verification when ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-213-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Backup Solenoid Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Disc Brake Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983015092\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-213-00 backup solenoid valve used for?\u003c\/strong\u003e Part number 068-213-00 is a backup solenoid valve used within a trailer's disc brake actuator system to control the hydraulic circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this valve come with mounting hardware?\u003c\/strong\u003e Yes, the 068-213-00 backup solenoid valve is supplied as a kit that includes the valve along with its associated hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter backup solenoid valve weigh?\u003c\/strong\u003e The 068-213-00 backup solenoid valve weighs 0.46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 068-213-00 valve compatible with all trailer brake actuators?\u003c\/strong\u003e Compatibility should be confirmed against your specific disc brake actuator model, as fitment details beyond the disc brake actuator application are not specified for part 068-213-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 068-213-00?\u003c\/strong\u003e Part number 068-213-00 is manufactured under the Dexter brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a solenoid-type or manual backup valve?\u003c\/strong\u003e The 068-213-00 is a solenoid-controlled backup valve, not a manually operated valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with this part?\u003c\/strong\u003e The Dexter 068-213-00 backup solenoid valve carries UPC 876983015092.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this valve be used as a replacement part?\u003c\/strong\u003e The 068-213-00 backup solenoid valve is designed for use as a component of a disc brake actuator, suitable for replacement of the backup valve within that system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 068-213-00 kit?\u003c\/strong\u003e The kit for part 068-213-00 includes the backup solenoid valve itself along with the hardware needed to install it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 068-213-00 valve heavy or bulky to install?\u003c\/strong\u003e At 0.46 pounds, the 068-213-00 backup solenoid valve is a small, lightweight component, making it easy to handle during installation.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258181851,"sku":"DEX-068-213-00","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DIC-4748800_lg__20058.1558114635.500.750.jpg?v=1785188509"},{"product_id":"diaphragm-filler-cap-for-model-60-hydraulic-trailer-brake-actuator-master-cylinder-cap-with-gasket-aero-7500","title":"Dexter Diaphragm Filler Cap 068-147-00 for Model 60 Aero 7500 Trailer Brake Actuator","description":"\u003cp\u003eThe Dexter diaphragm filler cap, part number 068-147-00, is the reservoir cap used on Model 60 Aero 7500 trailer brake actuators. It seals the top of the hydraulic actuator's fluid reservoir while the internal diaphragm flexes to accommodate normal changes in brake fluid level as the actuator cycles, helping keep the reservoir sealed against contamination and moisture. This is a small, lightweight component at just 0.04 pounds, sized to fit the compact reservoir opening on the Model 60 Aero 7500 actuator housing. Because the filler cap and its diaphragm are wear items exposed to fluid, heat, and repeated actuation cycles, they can crack, harden, or lose their seal over time, which allows moisture and debris into the reservoir or lets fluid weep past the cap. Replacing a worn or damaged cap with the correct part restores a proper seal on the reservoir without needing to replace the entire actuator. This cap is intended specifically for use on Model 60 Aero 7500 trailer brake actuators.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 068-147-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Trailer Brake Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Model:\u003c\/strong\u003e Model 60 Aero 7500 Trailer Brake Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Diaphragm Filler Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 1.5 x 1.5 x 1 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eModel 60 Aero 7500 Trailer Brake Actuator\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 068-147-00 filler cap used for?\u003c\/strong\u003e It is the diaphragm filler cap that seals the fluid reservoir on a Model 60 Aero 7500 trailer brake actuator, allowing the diaphragm to flex with normal fluid level changes while keeping contamination out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this cap fit Titan Model 60 trailer brake actuators?\u003c\/strong\u003e Yes, part number 068-147-00 is designed to fit Model 60 Aero 7500 trailer brake actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the replacement filler cap?\u003c\/strong\u003e The 068-147-00 cap measures 1.5 x 1.5 x 1 inches, a compact size matched to the Model 60 Aero 7500 reservoir opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the filler cap weigh?\u003c\/strong\u003e The Dexter 068-147-00 diaphragm filler cap weighs 0.04 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Dexter part or an aftermarket copy?\u003c\/strong\u003e Part number 068-147-00 is the Dexter part number for this diaphragm filler cap, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the diaphragm inside the cap actually do?\u003c\/strong\u003e The diaphragm in the 068-147-00 filler cap flexes to accommodate normal fluid level changes in the Model 60 Aero 7500 actuator's reservoir while keeping the reservoir sealed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my actuator's filler cap needs replacing?\u003c\/strong\u003e A cracked, hardened, or leaking diaphragm cap on a Model 60 Aero 7500 actuator will let fluid weep past the seal or allow moisture into the reservoir, both signs that the 068-147-00 cap should be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this cap be used on other actuator models besides the Model 60 Aero 7500?\u003c\/strong\u003e Part number 068-147-00 is specified for the Model 60 Aero 7500 trailer brake actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 068-147-00 cap seal the reservoir opening completely?\u003c\/strong\u003e Yes, the diaphragm filler cap seals the top of the Model 60 Aero 7500 reservoir while its internal diaphragm allows for fluid expansion and contraction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would a trailer brake actuator need a new filler cap instead of a full actuator replacement?\u003c\/strong\u003e If only the diaphragm filler cap on a Model 60 Aero 7500 actuator has failed, replacing the 068-147-00 cap restores the reservoir seal without replacing the entire actuator assembly.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991258214619,"sku":"DEX-068-147-00","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4480701__87041.1722495044.500.750.jpg?v=1785188533"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/41sflLdxdmL.jpg?v=1785359992","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trailering.oembed?page=4","provider":"Good Vibes Marina","version":"1.0","type":"link"}