{"title":"Jack Plate Bolt Kits \u0026 Hardware","description":null,"products":[{"product_id":"t-h-marine-atlas-hot-shot-jack-plate-hole-shot-plate-10-inch-v-model-ahjhsp-10v","title":"T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate AHJHSP-10V, Fits ATLAS Hydraulic Jack Plates","description":"\u003cp\u003eThe T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate (AHJHSP-10V) is a performance upgrade designed to improve hole shot and reduce bow rise on boats equipped with ATLAS hydraulic jack plates. By improving water flow and lift at takeoff, the Hot Shot Plate helps a boat get on plane faster and accelerate more efficiently, which is especially useful when running heavy loads, a full crew, or challenging water conditions. It is built to integrate seamlessly with ATLAS hydraulic jack plates for a direct, purpose-matched fit.\u003c\/p\u003e\u003cp\u003eConstructed from durable, corrosion-resistant marine-grade plastic in an off-white finish, the Hot Shot Plate is engineered to hold up to harsh marine environments while adding minimal weight to the jack plate assembly. Installation is straightforward, allowing boat owners to add the performance upgrade without extensive modification. Whether used for tournament fishing or everyday cruising, this plate gives boaters improved acceleration, better visibility during takeoff by minimizing bow rise, and more consistent handling when the boat is loaded down.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-10V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Atlas Hole Shot Plate, 10 Inch, V Style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Off-white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 16 x 8.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070156\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits ATLAS hydraulic jack plates\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine AHJHSP-10V Hot Shot Plate do?\u003c\/strong\u003e The AHJHSP-10V Hot Shot Plate improves hole shot and reduces bow rise on boats with ATLAS hydraulic jack plates, helping the boat get on plane faster and accelerate more efficiently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat jack plates does the AHJHSP-10V fit?\u003c\/strong\u003e This Hole Shot Plate is designed to integrate seamlessly with ATLAS hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the AHJHSP-10V Hot Shot Plate made from?\u003c\/strong\u003e It is made from durable, corrosion-resistant marine-grade plastic in an off-white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-10V weigh?\u003c\/strong\u003e The AHJHSP-10V Hot Shot Plate weighs 2.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the AHJHSP-10V Hole Shot Plate?\u003c\/strong\u003e The plate measures 4 x 16 x 8.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Hot Shot Plate reduce bow rise?\u003c\/strong\u003e Yes, minimizing bow rise for better visibility and control during takeoff is one of the plate's primary functions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-10V easy to install?\u003c\/strong\u003e Yes, it is designed for easy installation for quick performance gains on a compatible ATLAS hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-10V help with heavy loads?\u003c\/strong\u003e Yes, it enhances lift and acceleration with heavy loads, making it useful for tournament fishing or cruising with a full crew.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine AHJHSP-10V?\u003c\/strong\u003e The UPC for the AHJHSP-10V Hot Shot Plate is 733572070156.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-10V a standalone jack plate?\u003c\/strong\u003e No, it is a Hole Shot Plate accessory engineered to be added onto an existing ATLAS hydraulic jack plate, not a jack plate on its own.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260541147,"sku":"T-H-AHJHSP-10V-DP","price":89.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043.jpg?v=1784498426"},{"product_id":"t-h-marine-atlas-hot-shot-jack-plate-hole-shot-plate-4-inch-fits-atlas-hydraulic-jack-plates-ahjhsp-4v","title":"T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate AHJHSP-4V","description":"\u003cp\u003eThe T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate (AHJHSP-4V) is a performance add-on plate engineered to improve hole shot and reduce bow rise on boats running an ATLAS hydraulic jack plate. By reshaping water flow and lift at takeoff, it helps the boat come up on plane faster and more level, which is especially useful when running heavy loads, a full crew, or challenging water conditions. The plate is designed to integrate seamlessly with ATLAS hydraulic jack plates, so it bolts onto the existing jack plate setup rather than requiring a separate mounting system.\u003c\/p\u003e\u003cp\u003eConstruction is durable, corrosion-resistant marine-grade metal built to hold up to sustained exposure to water and weather. Installation is straightforward, giving boaters a quick way to gain a performance edge without adding complexity to the jack plate or replacing it. This is a popular upgrade for tournament anglers and any boat owner who wants quicker acceleration, better visibility off the beach or ramp from reduced bow rise, and more efficient takeoff performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-4V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 to 900 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070002\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to integrate seamlessly with ATLAS hydraulic jack plates. No specific engine make, horsepower, or model fitment is listed for this plate.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference or replacement part numbers are listed for the AHJHSP-4V.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine AHJHSP-4V Hot Shot plate do?\u003c\/strong\u003e It improves hole shot and reduces bow rise by enhancing water flow and lift at takeoff, helping the boat get on plane faster, especially with heavy loads or a full crew.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-4V fit any jack plate?\u003c\/strong\u003e The AHJHSP-4V is designed to integrate seamlessly with ATLAS hydraulic jack plates rather than jack plates in general.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJHSP-4V made of?\u003c\/strong\u003e The AHJHSP-4V Hot Shot plate is constructed from durable, corrosion-resistant metal built for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-4V weigh?\u003c\/strong\u003e The T-H Marine AHJHSP-4V weighs 1.1875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of this Hot Shot plate?\u003c\/strong\u003e The AHJHSP-4V is rated for a load capacity of 300 to 900 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the AHJHSP-4V difficult?\u003c\/strong\u003e No, the ATLAS Hot Shot plate is designed for easy installation as a bolt-on upgrade to an existing ATLAS hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AHJHSP-4V reduce bow rise on my boat?\u003c\/strong\u003e Yes, minimizing bow rise is one of the primary functions of the AHJHSP-4V, which improves visibility and control during takeoff.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes of this Hot Shot plate available?\u003c\/strong\u003e The AHJHSP-4V is one part number in the ATLAS Hot Shot plate lineup; other setback sizes are sold under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-4V a genuine T-H Marine part?\u003c\/strong\u003e Yes, the AHJHSP-4V is a genuine T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum height listed for the AHJHSP-4V?\u003c\/strong\u003e The AHJHSP-4V has a listed minimum height of 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-4V come with cross-reference or OEM replacement numbers?\u003c\/strong\u003e No OEM cross-reference or replacement part numbers are listed for the AHJHSP-4V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho is the AHJHSP-4V Hot Shot plate best suited for?\u003c\/strong\u003e Boaters running an ATLAS hydraulic jack plate who want quicker acceleration and improved hole shot, including tournament anglers running heavy loads, will benefit most from the AHJHSP-4V.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260606683,"sku":"T-H-AHJHSP-4V-DP","price":57.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043_f5406c0a-4f7e-4eef-b405-2f762c107ad6.jpg?v=1784498435"},{"product_id":"t-h-marine-atlas-hot-shot-hole-shot-plate-6-inch-v-fits-atlas-hydraulic-jack-plates-ahjhsp-6v","title":"T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate, 6 Inch, AHJHSP-6V","description":"\u003cp\u003eThe T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate (AHJHSP-6V) is a 6 inch add-on plate that attaches to the bottom of an ATLAS hydraulic jack plate to sharpen hole shot performance. By dramatically reducing water drag at takeoff and acting as a center trim tab, the Hot Shot Plate delivers an improvement of 18 to 20 percent in hole shot, translating to roughly 2 to 3 seconds faster out of the hole. Beyond the initial launch, the plate also helps the boat stay on plane and virtually eliminates porpoising at lower speeds, giving tournament anglers and weekend boaters alike more confidence when running heavy loads or a full crew.\u003c\/p\u003e\u003cp\u003eBuilt from aluminum with a silver finish, the plate is designed for durability in demanding conditions and is rated for use in salt water. It mounts via a transom mount configuration and is engineered to integrate seamlessly with ATLAS hydraulic jack plates for a straightforward, bolt-on installation that requires no complex modification.\u003c\/p\u003e\u003cp\u003eThis 6 inch version (AHJHSP-6V) is one of several Hot Shot Plate sizes T-H Marine offers; 4 inch and 10 inch versions are also available as separate part numbers, so confirm the 6 inch size is correct for your jack plate before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-6V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e ATLAS Series Hot Shot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Transom mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Shot Improvement:\u003c\/strong\u003e 18 to 20 percent faster\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most ATLAS hydraulic jack plates, both standard and heavy duty versions. It will not work with the Bass Cat Atlas jack plate.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the AHJHSP-6V Hot Shot Plate actually do?\u003c\/strong\u003e It attaches to the bottom of an ATLAS hydraulic jack plate and reduces water drag at takeoff, improving hole shot by 18 to 20 percent, which works out to roughly 2 to 3 seconds faster getting out of the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AHJHSP-6V fit my jack plate?\u003c\/strong\u003e The AHJHSP-6V is designed to fit most ATLAS hydraulic jack plates, including both standard and heavy duty versions, but it will not work with the Bass Cat Atlas jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-6V weigh?\u003c\/strong\u003e The 6 inch T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate weighs 1.59 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hot Shot Plate made from?\u003c\/strong\u003e The AHJHSP-6V is constructed from aluminum with a silver finish, built to hold up in harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-6V rated for saltwater use?\u003c\/strong\u003e Yes, the AHJHSP-6V Hot Shot Plate is recommended for use in salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this plate help with porpoising at lower speeds?\u003c\/strong\u003e Yes, in addition to improving hole shot, the Hot Shot Plate helps the boat stay on plane and virtually eliminates porpoising at lower speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the AHJHSP-6V different from the 4 inch or 10 inch Hot Shot plates?\u003c\/strong\u003e The AHJHSP-6V is the 6 inch version of the ATLAS Hot Shot Jack Plate Hole Shot Plate; T-H Marine also offers 4 inch and 10 inch versions as separate part numbers, so the correct size should be matched to your jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the AHJHSP-6V installed?\u003c\/strong\u003e It uses a transom mount configuration and is designed to integrate seamlessly with ATLAS hydraulic jack plates for straightforward attachment to the bottom of the jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the AHJHSP-6V come in?\u003c\/strong\u003e The AHJHSP-6V Hot Shot Plate has a silver aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hot Shot Plate work as a trim tab too?\u003c\/strong\u003e Yes, the AHJHSP-6V serves as a center trim tab in addition to reducing water drag at takeoff, which contributes to its hole shot performance gains.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260737755,"sku":"T-H-AHJHSP-6V-DP","price":62.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043_5a979233-312f-46df-b40f-e96b126412bb.jpg?v=1784498439"},{"product_id":"t-h-marine-atlas-hot-shot-jack-plate-hole-shot-plate-ahjhsp-8v-fits-all-atlas-hydraulic-jack-plates","title":"T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate, Model AHJ-8V","description":"\u003cp\u003eThe T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate (AHJHSP-8V) is a performance upgrade designed to attach to ATLAS hydraulic jack plates and improve how a boat comes onto plane. By enhancing water flow and lift at takeoff, the Hot Shot Plate helps the boat get on plane faster and reduces bow rise during acceleration, giving the driver better visibility and control right at the critical moment of takeoff. This is especially useful when running heavy loads, a full crew, or tournament-ready gear, where slower hole shot and pronounced bow rise are common problems.\u003c\/p\u003e\u003cp\u003eThe plate is built from durable, marine-grade material designed to hold up in harsh, wet marine environments without compromising reliability. It is engineered to integrate seamlessly with ATLAS hydraulic jack plates, specifically the AHJ-8V model, so installation adds performance without requiring a different jack plate setup. Installation is straightforward, letting boaters add the performance benefit without extensive modification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-8V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e ATLAS Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hot Shot Jack Plate Hole Shot Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12 x 12 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits ATLAS hydraulic jack plates, model AHJ-8V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned to fit ATLAS hydraulic jack plates, model AHJ-8V\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate (AHJHSP-8V) do?\u003c\/strong\u003e The AHJHSP-8V is designed to improve hole shot and reduce bow rise as a boat comes onto plane, helping the boat get up and moving faster, especially with heavy loads or a full crew aboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat jack plates does the AHJHSP-8V fit?\u003c\/strong\u003e This Hole Shot Plate is designed to integrate with ATLAS hydraulic jack plates, specifically model AHJ-8V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJHSP-8V made of?\u003c\/strong\u003e The Hot Shot Jack Plate Hole Shot Plate is constructed from durable plastic material designed to hold up in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-8V weigh?\u003c\/strong\u003e The T-H Marine AHJHSP-8V weighs 2.37 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the AHJHSP-8V Hole Shot Plate?\u003c\/strong\u003e The AHJHSP-8V measures 12 x 12 x 12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AHJHSP-8V work with any jack plate, or only ATLAS models?\u003c\/strong\u003e The AHJHSP-8V is engineered specifically to integrate with ATLAS hydraulic jack plates, model AHJ-8V, rather than being a universal fit for all jack plate brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-8V easy to install?\u003c\/strong\u003e Yes, the T-H Marine Hot Shot Jack Plate Hole Shot Plate is designed for easy installation for a quick performance gain once mounted to a compatible ATLAS jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I add a Hole Shot Plate to my jack plate?\u003c\/strong\u003e Adding the AHJHSP-8V helps a boat plane out quicker and reduces bow rise, which improves visibility and control during takeoff, particularly useful for tournament fishing or running with heavy loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-8V reduce bow rise?\u003c\/strong\u003e Yes, minimizing bow rise for better visibility and control during acceleration is one of the primary functions of the ATLAS Hot Shot Jack Plate Hole Shot Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-8V corrosion resistant?\u003c\/strong\u003e The T-H Marine Hot Shot Plate is built from durable, corrosion-resistant marine construction intended for harsh boating environments.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260770523,"sku":"T-H-AHJHSP-8V-DP","price":82.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043_8d7fb5d4-52ea-4f40-ba35-ba6199f2f5a4.jpg?v=1784498449"},{"product_id":"t-h-marine-atlas-hot-shot-hole-shot-plate-12-faster-hole-shot-for-atlas-hydraulic-jack-plates-ahjhsp-12v","title":"T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate, 12 Inch, Fits AHJ-12V Hydraulic Jack Plates","description":"\u003cp\u003eThe T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate (AHJHSP-12V) is a performance upgrade designed to integrate seamlessly with ATLAS hydraulic jack plates, specifically fitting the AHJ-12V model. Engineered to enhance hole shot and reduce bow rise, this plate helps your boat get on plane faster, which is especially useful when running heavy loads or in challenging water conditions. By improving water flow and lift at takeoff, the Hot Shot Plate delivers quicker acceleration and better overall efficiency off the line, giving tournament anglers and everyday boaters alike an edge when it matters most.\u003c\/p\u003e\u003cp\u003eConstructed from durable plastic with a chrome finish, the plate is built to handle harsh marine environments while resisting corrosion. It is a simple bolt-on addition to a compatible ATLAS hydraulic jack plate and requires no complex modification, making it an easy way to pick up meaningful performance gains. The 12 inch size matches the AHJ-12V jack plate it is designed for, and the unit measures 16 x 3.25 x 10.5 inches with a shipping weight of 3.44 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e ATLAS Series Hot Shot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 16 x 3.25 x 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 16 x 11.1 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.44 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits ATLAS hydraulic jack plate model AHJ-12V\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate do?\u003c\/strong\u003e The AHJHSP-12V Hot Shot Plate is engineered to enhance hole shot and reduce bow rise, helping a boat get on plane faster, especially with heavy loads or in challenging conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich jack plate does the AHJHSP-12V fit?\u003c\/strong\u003e This hole shot plate is designed to integrate seamlessly with ATLAS hydraulic jack plates, specifically the AHJ-12V model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-12V compatible with manual jack plates?\u003c\/strong\u003e No, the AHJHSP-12V is built to fit ATLAS hydraulic jack plates (AHJ-12V); it is not the same product as T-H Marine's Z-Lock manual jack plate hole shot plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the AHJHSP-12V hole shot plate?\u003c\/strong\u003e The AHJHSP-12V is a 12 inch hole shot plate, matched to the 12 inch AHJ-12V ATLAS hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the AHJHSP-12V made from?\u003c\/strong\u003e T-H Marine builds the AHJHSP-12V Hot Shot Plate from durable plastic with a chrome finish, designed to hold up in harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-12V weigh?\u003c\/strong\u003e The AHJHSP-12V Hot Shot Plate weighs 3.44 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the AHJHSP-12V?\u003c\/strong\u003e The item measures 16 x 3.25 x 10.5 inches; the package it ships in measures 16 x 11.1 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Hot Shot Plate reduce porpoising at low speed?\u003c\/strong\u003e The AHJHSP-12V improves water flow and lift at takeoff for quicker acceleration; it is designed to enhance hole shot and reduce bow rise on the ATLAS AHJ-12V jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the AHJHSP-12V difficult?\u003c\/strong\u003e The AHJHSP-12V is designed for easy installation, attaching directly to a compatible ATLAS AHJ-12V hydraulic jack plate for quick performance gains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-12V come with mounting hardware?\u003c\/strong\u003e The AHJHSP-12V is sold as the Hot Shot hole shot plate itself, sized and designed to bolt onto the ATLAS AHJ-12V hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho benefits most from adding the AHJHSP-12V to a jack plate?\u003c\/strong\u003e Tournament anglers and boaters running heavy loads or a full crew benefit most from the AHJHSP-12V, since it is engineered to improve hole shot and reduce bow rise on takeoff.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260803291,"sku":"T-H-AHJHSP-12V-DP","price":103.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043_efe11c8b-0a05-4645-a384-f5559cff44fd.jpg?v=1784498449"},{"product_id":"t-h-marine-atlas-jack-plate-rocker-switch-ahjswitch-1-for-atlas-hydraulic-jack-plates","title":"T-H Marine AHJSWITCH-1 Rocker Switch for Atlas Jack Plates","description":"\u003cp\u003eThe T-H Marine AHJSWITCH-1 is a rocker switch built as a direct replacement component for Atlas hydraulic jack plates. When the original control switch on a jack plate wears out, sticks, or fails to make contact, this rocker switch restores reliable operation of the jack plate's height and trim adjustment without needing to replace the entire actuator or wiring harness. It is molded from durable plastic with a black housing and is rated IP67 for protection against water intrusion and vibration, making it suited to the marine environment it operates in at the transom. The switch uses a hinge-lever rocker actuator with two positions and a 1-way circuit, wired through screw terminal connections for a secure, corrosion-resistant electrical connection. Contact is made through copper contacts in a normally-open configuration, and the switch is rated for 2 amps at 2 volts of control current, consistent with its role as a low-current control switch that signals a relay or actuator rather than carrying the jack plate's main motor load directly. It measures 6 inches by 2.75 inches by 2 inches and can be panel-mounted or surface-mounted depending on the installation. This part is designed to fit Atlas jack plates and is intended for boat owners and installers replacing a failed or damaged factory switch as part of routine jack plate maintenance or repair.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJSWITCH-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Rocker Switch for Atlas Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Hinge lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 2 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 2 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount or surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 2.75 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572081459\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAtlas hydraulic jack plates\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine AHJSWITCH-1?\u003c\/strong\u003e The AHJSWITCH-1 is a rocker switch made to replace the factory control switch on Atlas hydraulic jack plates, restoring height and trim control when the original switch fails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch fit my jack plate?\u003c\/strong\u003e The AHJSWITCH-1 is designed to fit Atlas hydraulic jack plates as a direct replacement switch component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the electrical ratings of this switch?\u003c\/strong\u003e The AHJSWITCH-1 rocker switch is rated for 2 amps at 2 volts and uses a normally-open contact configuration, since it functions as a low-current control switch rather than carrying the jack plate's main motor current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the switch housing made from?\u003c\/strong\u003e It is molded from durable plastic in a black finish, sized for marine control panels and rated IP67 against water and vibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the AHJSWITCH-1?\u003c\/strong\u003e The switch measures 6 inches by 2.75 inches by 2 inches and weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the switch wired in?\u003c\/strong\u003e The AHJSWITCH-1 connects using screw terminal connectors, allowing a secure electrical connection during installation or replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be panel mounted or surface mounted?\u003c\/strong\u003e Yes, the AHJSWITCH-1 supports both panel mounting and surface mounting depending on how the jack plate control is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does the rocker switch have?\u003c\/strong\u003e It is a 2-position rocker switch operated by a hinge-lever actuator on a single 1-way circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine T-H Marine replacement part?\u003c\/strong\u003e Yes, the AHJSWITCH-1 is a genuine T-H Marine rocker switch built specifically as a replacement component for Atlas jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch include cross-reference or OEM replacement numbers?\u003c\/strong\u003e No OEM cross-reference or replaces numbers are listed for the AHJSWITCH-1; it is identified by its own T-H Marine part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch rated for outdoor marine use?\u003c\/strong\u003e Yes, the AHJSWITCH-1 carries an IP67 ingress protection rating, meaning it is sealed against water and vibration for use in the marine environment around a jack plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the switch contact material affect?\u003c\/strong\u003e The AHJSWITCH-1 uses copper contacts in a normally-open configuration, providing reliable electrical continuity when the rocker is actuated.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260967131,"sku":"T-H-AHJSWITCH-1-DP","price":28.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/replacement-relay-harness-for-hydraulic-jack-plates-2014-ahjrelaykit-2-dp-atlas-jack-plate-replacement-parts-28008702935083.jpg?v=1784498455"},{"product_id":"t-h-marine-atlas-jack-plate-replacement-wiring-harness-ahjrelaykit-2-for-atlas-hydraulic-jack-plates","title":"T-H Marine ATLAS Jack Plate Replacement Wiring Harness, AHJRELAYKIT-2","description":"\u003cp\u003eThe T-H Marine AHJRELAYKIT-2 is a genuine replacement wiring harness engineered specifically for ATLAS hydraulic jack plates. As an OEM component, it is built to restore the exact electrical connection your jack plate relies on for smooth, precise height and trim control, without the fitment guesswork that comes with generic aftermarket wiring.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing a worn harness or making a critical repair after damage or corrosion, this replacement part is designed to match the original ATLAS system's performance standards. It is constructed for strength and corrosion resistance so it can stand up to the harsh marine environment, and it is intended for straightforward, direct installation in place of the original harness.\u003c\/p\u003e\u003cp\u003eThis wiring harness is part of T-H Marine's lineup of genuine ATLAS Jack Plate Replacement Parts, which also includes actuators, switches, and related hardware, so you can source the exact components needed to maintain or upgrade your ATLAS hydraulic jack plate setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJRELAYKIT-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Replacement Wiring Harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e ATLAS Hydraulic Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plate Replacement Part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572083101\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically for ATLAS hydraulic jack plates.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJRELAYKIT-2?\u003c\/strong\u003e The AHJRELAYKIT-2 is a genuine T-H Marine replacement wiring harness designed specifically for ATLAS hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this wiring harness fit any jack plate?\u003c\/strong\u003e No, the AHJRELAYKIT-2 is designed specifically for ATLAS hydraulic jack plates and is not a universal-fit part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM part or an aftermarket copy?\u003c\/strong\u003e It is a genuine OEM component from T-H Marine, built for OEM fit and function on ATLAS hydraulic jack plates rather than a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJRELAYKIT-2 weigh?\u003c\/strong\u003e This replacement wiring harness weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my jack plate's wiring harness?\u003c\/strong\u003e A worn, damaged, or corroded harness can cause unreliable height and trim control on an ATLAS hydraulic jack plate, and the AHJRELAYKIT-2 restores that connection as a direct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJRELAYKIT-2 made to withstand?\u003c\/strong\u003e The AHJRELAYKIT-2 is built for corrosion resistance and durability so it can hold up in the harsh marine environment surrounding an ATLAS hydraulic jack plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation straightforward?\u003c\/strong\u003e Yes, the AHJRELAYKIT-2 is designed as a direct replacement component for easy installation in place of the original ATLAS jack plate wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other ATLAS jack plate parts are available alongside this harness?\u003c\/strong\u003e T-H Marine also offers other ATLAS Jack Plate Replacement Parts, including a rocker switch and a replacement actuator, so you can source the exact components needed for your ATLAS hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJRELAYKIT-2 come with installation instructions?\u003c\/strong\u003e The AHJRELAYKIT-2 is provided as an OEM replacement wiring harness intended for direct installation in place of the original harness on ATLAS hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the product number AHJRELAYKIT-2 refer to?\u003c\/strong\u003e AHJRELAYKIT-2 is the manufacturer part number for T-H Marine's Replacement Wiring Harness for ATLAS hydraulic jack plates.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991261851867,"sku":"T-H-AHJRELAYKIT","price":187.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/replacement-relay-harness-for-hydraulic-jack-plates-2014-ahjrelaykit-2-dp-atlas-jack-plate-replacement-parts-28008702935083_fa2ace68-b64b-4049-9797-43706ddf52a3.jpg?v=1784498471"},{"product_id":"t-h-marine-jpzhsp-10-hot-shot-hole-shot-plate-10-in-for-z-lock-manual-jack-plates","title":"T-H Marine JPZHSP-10 Hot Shot Hole Shot Plate for Z-Lock Manual Jack Plates, 10 Inch","description":"\u003cp\u003eThe T-H Marine JPZHSP-10 Hot Shot Hole Shot Plate is a bolt-on performance accessory that attaches to the bottom of a Z-Lock manual jack plate to improve hole shot and overall handling. By reducing water drag at take-off, the Hot Shot plate delivers an 18 to 20 percent better hole shot, which translates to a boat coming out of the hole 2 to 3 seconds faster. In addition to improving acceleration, the plate acts as a center trim tab, helping the boat stay on plane and virtually eliminating porpoising at lower speeds.\u003c\/p\u003e\u003cp\u003eThe JPZHSP-10 is the 10 inch model in T-H Marine's Hot Shot lineup, sized to match jack plates in the same family as the JPZHSP-6 and JPZHSP-8 plates. It is molded from durable plastic and ships individually boxed as a single unit, ready to mount directly to a compatible Z-Lock manual jack plate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZHSP-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hot Shot Hole Shot Plate, 10 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 18 x 9 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Z-Lock manual jack plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Individually boxed, sold as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for Z-Lock manual jack plates\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the JPZHSP-10 Hot Shot Hole Shot Plate do?\u003c\/strong\u003e It attaches to the bottom of a Z-Lock manual jack plate to reduce water drag at take-off, giving an 18 to 20 percent better hole shot, which is about 2 to 3 seconds faster out of the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hot Shot plate help with porpoising?\u003c\/strong\u003e Yes, the JPZHSP-10 also functions as a center trim tab, which helps the boat stay on plane and virtually eliminates porpoising at lower speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat jack plates is the JPZHSP-10 compatible with?\u003c\/strong\u003e The JPZHSP-10 is designed to fit T-H Marine's Z-Lock manual jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JPZHSP-10 weigh?\u003c\/strong\u003e The JPZHSP-10 Hot Shot Hole Shot Plate weighs 2.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the JPZHSP-10?\u003c\/strong\u003e The JPZHSP-10 measures 18 x 9 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hot Shot Hole Shot Plate made from?\u003c\/strong\u003e The JPZHSP-10 is made from plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 10 inch model the largest Hot Shot plate available?\u003c\/strong\u003e T-H Marine offers the Hot Shot Hole Shot Plate in multiple sizes, including the JPZHSP-6, JPZHSP-8, and the JPZHSP-10 covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZHSP-10 packaged?\u003c\/strong\u003e The JPZHSP-10 ships individually boxed as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Hot Shot plate work with a hydraulic jack plate?\u003c\/strong\u003e The JPZHSP-10 is built for Z-Lock manual jack plates; no hydraulic jack plate compatibility is listed for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much faster is hole shot with the JPZHSP-10 installed?\u003c\/strong\u003e Boats equipped with the JPZHSP-10 come out of the hole 2 to 3 seconds faster, reflecting the 18 to 20 percent improvement in hole shot performance.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264768219,"sku":"T-H-JPZHSP-10","price":84.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6-hole-shot-plate-z-lock-hole-shot-plate-28009429696555.jpg?v=1784498665"},{"product_id":"t-h-marine-z-lock-hot-shot-hole-shot-plate-jpzhsp-6-fits-6-z-lock-manual-jack-plates-jpz-6","title":"T-H Marine Z-Lock Hole Shot Plate JPZHSP-6, 6 Inch Setback, Fits JPZ-6 Jack Plates","description":"\u003cp\u003eThe T-H Marine Z-Lock Hole Shot Plate (JPZHSP-6) is a bolt-on performance plate that attaches to the bottom of a compatible 6 inch setback Z-Lock jack plate to sharpen hole shot and takeoff handling. Marketed under T-H Marine's Hot Shot line, it works by dramatically reducing water drag as the boat comes onto plane, and by doubling as a center trim tab. Owners of Z-Lock manual jack plates use it to get the bow up and the hull planing faster, with the added benefit of reduced porpoising at lower cruising speeds and better plane-holding stability.\u003c\/p\u003e\u003cp\u003eInstallation is a straightforward bolt-on to the bottom of the jack plate, and the plate ships individually boxed. It is sized specifically for the 6 inch setback Z-Lock jack plate (JPZ-6); T-H Marine also offers matching Hot Shot hole shot plates in 8 inch and 10 inch setback sizes for the corresponding jack plate widths, so boat owners should confirm their jack plate's setback before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZHSP-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Z-Lock Hole Shot Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback Size:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Jack Plate:\u003c\/strong\u003e Z-Lock Jack Plate, 6 inch setback (JPZ-6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572080704\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Individually boxed, open quantity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits T-H Marine's Z-Lock Manual Jack Plate with a 6 inch setback, part number JPZ-6.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the JPZHSP-6 Hole Shot Plate do?\u003c\/strong\u003e It bolts to the bottom of a Z-Lock jack plate to reduce water drag on takeoff and act as a center trim tab, which improves hole shot and helps the boat get on plane faster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich jack plate does the JPZHSP-6 fit?\u003c\/strong\u003e The JPZHSP-6 is sized for T-H Marine's Z-Lock Manual Jack Plate with a 6 inch setback, part number JPZ-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the JPZHSP-6 fit an 8 or 10 inch setback jack plate?\u003c\/strong\u003e No, the JPZHSP-6 is built for the 6 inch setback Z-Lock jack plate; T-H Marine offers the JPZHSP-8 for 8 inch setback plates and the JPZHSP-10 for 10 inch setback plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much faster is hole shot with this plate installed?\u003c\/strong\u003e T-H Marine states the Hot Shot Hole Shot Plate design delivers an 18 to 20 percent better hole shot, translating to about 2 to 3 seconds faster out of the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hole Shot Plate help with porpoising?\u003c\/strong\u003e Yes, the JPZHSP-6 reduces porpoising at lower speeds and helps the boat stay on plane by functioning as a center trim tab in addition to cutting water drag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JPZHSP-6 weigh?\u003c\/strong\u003e The T-H Marine JPZHSP-6 Hole Shot Plate weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Hole Shot Plate installed?\u003c\/strong\u003e The JPZHSP-6 attaches to the bottom of a compatible Z-Lock jack plate as a bolt-on addition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZHSP-6 packaged?\u003c\/strong\u003e It ships individually boxed as an open-quantity item, part number JPZHSP-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JPZHSP-6 a genuine T-H Marine part?\u003c\/strong\u003e Yes, JPZHSP-6 is T-H Marine's own part number for the Z-Lock Hole Shot Plate, sized for the 6 inch setback Z-Lock jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine JPZHSP-6?\u003c\/strong\u003e The UPC for the JPZHSP-6 Z-Lock Hole Shot Plate is 733572080704.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991265226971,"sku":"T-H-JPZHSP-6","price":72.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6-hole-shot-plate-z-lock-hole-shot-plate-28009429696555_9d6ecafc-83f1-46fc-a308-c53117914859.jpg?v=1784498699"},{"product_id":"t-h-marine-cmc-top-transom-washer-plate-12-7-8-inch-hole-centers-6061-t6-aluminum","title":"T-H Marine CMC Top Transom Washer Plate, 12-7\/8 Inch Hole Centers, 6061-T6 Aluminum","description":"\u003cp\u003eThe T-H Marine CMC Top Transom Washer Plate is a load-distributing backing plate for transom-mounted tilt and trim units and jack plates. It is machined from strong 3\/8 inch 6061-T6 alloy aluminum, not cast aluminum, giving it the strength to handle the mounting loads of high performance engines without deforming. Bolting this plate against the inside of the transom spreads the clamping load of the mounting bolts across a wider area of fiberglass, so the bolt heads do not dig in, bite into, or crush the transom material over time. This is especially important on boats running powerful engines, where concentrated point loads from bolts alone can crack gelcoat or compress the transom core.\u003c\/p\u003e\u003cp\u003eThis is the top plate in a matched pair, with 12-7\/8 inch hole centers sized to line up with standard tilt and trim and jack plate mounting patterns. A companion CMC Bottom Transom Washer Plate is sold separately under a different part number with 9-7\/8 inch hole centers, so be sure to order the correct plate for the position you are reinforcing. The plate is a simple, purpose-built piece of hardware: no moving parts, no finish to wear off, just a solid aluminum backing plate designed to be installed once and left in place for the life of the transom mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 20022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/8 inch 6061-T6 alloy aluminum (not cast aluminum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Centers:\u003c\/strong\u003e 12-7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Top transom washer plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572020022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for transom mounting locations using a 12-7\/8 inch hole center pattern, matching standard CMC tilt and trim units and jack plates.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine CMC Top Transom Washer Plate used for?\u003c\/strong\u003e It is a backing plate, part number 20022, installed on the inside of a boat transom to spread the clamping load of tilt and trim or jack plate mounting bolts over a wider area so the bolts do not bite into or crush the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this plate made of?\u003c\/strong\u003e Part number 20022 is machined from 3\/8 inch 6061-T6 alloy aluminum, not cast aluminum, which gives it the strength to handle high performance engine mounting loads without deforming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hole centers on this washer plate?\u003c\/strong\u003e The hole centers measure 12-7\/8 inch, matching the mounting pattern of standard CMC tilt and trim units and jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the top or bottom transom washer plate?\u003c\/strong\u003e This is the top transom washer plate, part number 20022. A separate CMC Bottom Transom Washer Plate with 9-7\/8 inch hole centers is sold under a different part number, so make sure to order the plate that matches the position you are reinforcing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Top Transom Washer Plate weigh?\u003c\/strong\u003e Part number 20022 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the plate cast or machined aluminum?\u003c\/strong\u003e It is not cast aluminum. The CMC Top Transom Washer Plate, part 20022, is made from strong 3\/8 inch 6061-T6 alloy aluminum for better strength and load distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a transom washer plate instead of just tightening the mounting bolts directly?\u003c\/strong\u003e Direct bolt tightening without a backing plate concentrates load at each bolt head, which can bite into the transom over time, especially with high performance engines; the CMC Top Transom Washer Plate spreads that load evenly across the transom surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this washer plate come with mounting hardware?\u003c\/strong\u003e Part number 20022 is the aluminum washer plate itself; it is used together with the mounting bolts of the tilt and trim unit or jack plate being installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit any jack plate or tilt and trim unit?\u003c\/strong\u003e The CMC Top Transom Washer Plate, part 20022, is sized to a 12-7\/8 inch hole center pattern, matching standard CMC tilt and trim and jack plate mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the T-H Marine CMC Top Transom Washer Plate genuine or aftermarket?\u003c\/strong\u003e Part number 20022 is a genuine T-H Marine CMC component, manufactured to the same 12-7\/8 inch hole center pattern used across CMC's tilt and trim and jack plate mounting hardware.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442737371,"sku":"T-H-20022","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-20022_lg__95106.1651754573.500.750.jpg?v=1785163481"},{"product_id":"t-h-marine-cmc-transom-clamp-adapter-13022-for-pt-130-tilt-and-trim-atlas-tht-130c","title":"T-H Marine CMC Transom Clamp Adapter 13022 for PT-130 Tilt and Trim, ATLAS THT-130C","description":"\u003cp\u003eThe T-H Marine CMC Transom Clamp Adapter, part number 13022, is an adapter kit built for quick and easy installation of transom clamp type outboard motors onto full-size tilt and trim units and jack plates. It is compatible with the CMC PT-130 Tilt \u0026amp; Trim and the ATLAS THT-130C Tilt \u0026amp; Trim, both of which are larger trim units sized for standard outboard engine mounting with the BIA hole pattern.\u003c\/p\u003e\u003cp\u003eIf your outboard has clamps that tighten inside of the splash well rather than a standard bolt-on mount, this adapter lets the motor fit onto tilt and trim units or jack plates designed for standard, full-size motor mounting. It is intended for motors that are too big for smaller tilt and trim units or jack plates but still need to be fitted to the larger, standard-pattern plates. The 13022 adapter is also the required transom clamp adapter for the CMC BA-130 Breakaway unit when the outboard's clamps use thumb screws.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Transom Clamp Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Units:\u003c\/strong\u003e CMC PT-130 Tilt \u0026amp; Trim, ATLAS THT-130C Tilt \u0026amp; Trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Mounting Type:\u003c\/strong\u003e Transom clamp motors (clamps tighten inside the splash well)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Pattern of Compatible Units:\u003c\/strong\u003e BIA hole pattern (standard outboard engine mounting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739697130225\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCMC PT-130 Tilt \u0026amp; Trim\u003c\/li\u003e\n\u003cli\u003eATLAS THT-130C Tilt \u0026amp; Trim\u003c\/li\u003e\n\u003cli\u003eJack plates designed for standard, full-size motor mounting\u003c\/li\u003e\n\u003cli\u003eRequired accessory for the CMC BA-130 Breakaway unit when motor clamps use thumb screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine CMC Transom Clamp Adapter, part number 13022?\u003c\/strong\u003e Part number 13022 is an adapter kit that lets transom clamp type outboard motors mount onto tilt and trim units or jack plates that are built for standard, full-size motor mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich tilt and trim units is the 13022 adapter compatible with?\u003c\/strong\u003e It works with the CMC PT-130 Tilt \u0026amp; Trim and the ATLAS THT-130C Tilt \u0026amp; Trim, both larger trim units sized for standard outboard engine mounting with the BIA hole pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 13022 adapter also work with jack plates?\u003c\/strong\u003e Yes, the T-H Marine CMC Transom Clamp Adapter is designed to let transom clamp motors fit jack plates built for standard, full-size motor mounting, in addition to the PT-130 and THT-130C tilt and trim units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need this adapter if my outboard motor has transom clamps?\u003c\/strong\u003e If your motor's clamps tighten inside of the splash well, you will need the 13022 Transom Clamp Adapter to fit it onto a PT-130, THT-130C, or a compatible standard-pattern jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the T-H Marine CMC Transom Clamp Adapter required for the CMC BA-130 Breakaway unit?\u003c\/strong\u003e For motors with clamps that use thumb screws, the T-H-13022 Transom Clamp Adapter is required in order to use them with the CMC BA-130 Breakaway unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hole pattern does the PT-130 Tilt and Trim use?\u003c\/strong\u003e The CMC PT-130 and ATLAS THT-130C are sized for standard outboard engine mounting with the BIA hole pattern, which the 13022 adapter is built to work with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for part number 13022?\u003c\/strong\u003e The UPC for the T-H Marine CMC Transom Clamp Adapter, part 13022, is 739697130225.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the T-H Marine CMC Transom Clamp Adapter weigh?\u003c\/strong\u003e The 13022 Transom Clamp Adapter weighs 12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an adapter instead of mounting my motor directly?\u003c\/strong\u003e Some outboard motors are too large for smaller tilt and trim units or jack plates but use transom clamps rather than a standard bolt pattern, so the 13022 adapter is needed to fit them to the larger, standard-pattern plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does part number 13022 fall under?\u003c\/strong\u003e The T-H Marine CMC Transom Clamp Adapter, 13022, is categorized as a jack plate accessory used for transom clamp motor installations.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442770139,"sku":"T-H-13022","price":127.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-13022_lg__63042.1651754559.500.750.jpg?v=1785163481"},{"product_id":"t-h-marine-cmc-bottom-transom-washer-plate-3-8-inch-6061-t6-aluminum-9-7-8-inch-hole-centers","title":"T-H Marine CMC Bottom Transom Washer Plate, 3\/8 Inch 6061-T6 Aluminum, 9-7\/8 Inch Hole Centers","description":"\u003cp\u003eThe T-H Marine CMC Bottom Transom Washer Plate is a load-distributing backing plate designed to be installed on the lower side of the transom where an outboard, jack plate, or Power-Lift bracket is bolted through. It is machined from strong 3\/8 inch 6061-T6 alloy aluminum, not cast aluminum, giving it the strength to hold up under the high clamping loads of performance engines without deforming or cracking the way lighter cast plates can.\u003c\/p\u003e\u003cp\u003eIts main job is to spread bolt loads evenly across the transom surface. Without a washer plate, mounting bolts can concentrate pressure into small contact points and, over time, begin biting into the transom material, compressing the wood or coring underneath and loosening the mounting hardware. By sandwiching a rigid aluminum plate between the bolt heads or nuts and the transom, the CMC Bottom Transom Washer Plate keeps that load spread out, which helps protect the transom and keep the mounting hardware tight, particularly on high performance engines that put more stress on the transom during hard acceleration and trim changes.\u003c\/p\u003e\u003cp\u003eThe plate uses a 9-7\/8 inch hole center pattern. It is intended for use as the bottom-side counterpart in a transom mounting setup and installs using standard hand tools alongside the existing mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 20032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plate Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/8 Inch 6061-T6 Alloy Aluminum (Not Cast Aluminum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Centers:\u003c\/strong\u003e 9-7\/8 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Position:\u003c\/strong\u003e Bottom (transom underside)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572020032\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal bottom-side transom washer plate sized to a 9-7\/8 inch hole center pattern; not restricted to a specific engine make or model in available records.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CMC Bottom Transom Washer Plate used for?\u003c\/strong\u003e It is a backing plate that sits against the underside of the transom to spread out the clamping load from outboard, jack plate, or Power-Lift mounting bolts, part number 20032 in 3\/8 inch 6061-T6 alloy aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hole pattern does the 20032 washer plate use?\u003c\/strong\u003e The bottom transom washer plate uses a 9-7\/8 inch hole center pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this washer plate cast aluminum?\u003c\/strong\u003e No, the T-H Marine CMC Bottom Transom Washer Plate is made from 3\/8 inch 6061-T6 alloy aluminum, not cast aluminum, which gives it more strength under high mounting loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this transom washer plate weigh?\u003c\/strong\u003e The CMC Bottom Transom Washer Plate weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I need a washer plate on my transom?\u003c\/strong\u003e A washer plate spreads bolt loads evenly across the transom instead of letting them concentrate at the bolt heads, which helps stop mounting bolts from biting into and compressing the transom, especially on high performance engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a difference between the top and bottom transom washer plate?\u003c\/strong\u003e Yes, the part described here (20032) is the bottom-side washer plate, installed on the underside of the transom; a separate top-side washer plate with a different hole spacing is sold as its own part for use on the opposite face of the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 20032 washer plate come with mounting bolts?\u003c\/strong\u003e The listed contents are the aluminum washer plate itself; it is designed to be used with your existing transom mounting hardware rather than a separate bolt kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this washer plate work with a jack plate or Power-Lift bracket?\u003c\/strong\u003e The CMC Bottom Transom Washer Plate is designed as a load-distributing backing plate for transom-mounted hardware such as jack plates and Power-Lift brackets, based on its 9-7\/8 inch hole spacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CMC Bottom Transom Washer Plate suitable for high performance engines?\u003c\/strong\u003e Yes, its 3\/8 inch 6061-T6 aluminum construction is intended specifically to more evenly distribute mounting loads on high performance engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 20032 transom washer plate made of?\u003c\/strong\u003e It is made of strong 3\/8 inch 6061-T6 alloy aluminum, specifically not cast aluminum, for added durability under load.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442868443,"sku":"T-H-20032","price":60.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-20023_lg__52261.1558133114.500.750.jpg?v=1785163481"},{"product_id":"t-h-marine-cmc-transom-wedges-20122-2-degree-set-back-spacer-kit-for-power-lift-transom-brackets","title":"T-H Marine CMC Transom Wedges 20122, 2 Degree Set Back Spacer Kit for Power-Lift Transom Brackets","description":"\u003cp\u003eThe T-H Marine CMC Transom Wedges (part number 20122) are 2 degree wedges built to add extra positive or negative trim to your boat's transom. They serve as an aid for boats with an insufficient transom angle, or for boats experiencing planing problems at low speed, helping the hull find plane more efficiently. Beyond their primary role as trim wedges, the design allows the same set to double as set back spacers simply by inverting the 2, 4, and 6 wedge sets, giving you added mounting flexibility without buying a separate part. The hole pattern is drilled to match the Power-Lift transom bracket and standard motor mounting pattern, so the wedges install using the existing bolt holes without additional drilling. Each wedge measures 1\/2 inch x 4 inch x 11 1\/4 inch, and the set is finished in an off-white color. This is a practical, purpose-built solution for boaters looking to correct trim geometry or reposition their motor mount without replacing the transom bracket itself.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 20122\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWedge Angle:\u003c\/strong\u003e 2 Degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trim Wedge or Set Back Spacer (invert 2, 4, and 6 wedge sets to convert)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Pattern:\u003c\/strong\u003e Matches Power-Lift transom bracket and standard motor mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions (per wedge):\u003c\/strong\u003e 1\/2 inch x 4 inch x 11 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 inches x 4.9 inches x 1.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Off-white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to fit the same hole pattern as the Power-Lift transom bracket and standard motor mounting setups.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat do the T-H Marine CMC Transom Wedges (20122) do?\u003c\/strong\u003e They are 2 degree wedges that add extra positive or negative trim to a boat's transom, used to correct an insufficient transom angle or to help a boat that has planing problems at low speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these wedges be used as set back spacers instead of trim wedges?\u003c\/strong\u003e Yes, the 20122 wedge set is designed so you can invert the 2, 4, and 6 wedge sets and use the same kit as set back spacers rather than trim wedges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hole pattern on the CMC transom wedges?\u003c\/strong\u003e The hole pattern on part number 20122 matches the Power-Lift transom bracket and standard motor mounting pattern, so it lines up with existing mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is each transom wedge?\u003c\/strong\u003e Each wedge in the 20122 set measures 1\/2 inch x 4 inch x 11 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the T-H Marine CMC transom wedges?\u003c\/strong\u003e The 20122 transom wedge set has an off-white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the transom wedge set weigh?\u003c\/strong\u003e The T-H Marine CMC Transom Wedges, part number 20122, weigh 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these wedges fix a boat that won't get on plane at low speed?\u003c\/strong\u003e The 2 degree angle on the 20122 transom wedges is specifically intended to help boats with planing problems at low speed or an insufficient transom angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to drill new holes to install the CMC transom wedges?\u003c\/strong\u003e No, since the 20122 wedge set uses the same hole pattern as the Power-Lift transom bracket and standard motor mounting, it installs using the existing mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for part 20122?\u003c\/strong\u003e No OEM replacement or cross-reference numbers are listed for the T-H Marine CMC Transom Wedges, part number 20122.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the CMC 5 Inch Motor Mount Vertical Extension?\u003c\/strong\u003e The 20122 transom wedges adjust trim angle or set back position using shims at the existing mounting holes, while the CMC 5 Inch Motor Mount Vertical Extension is a separate bracket component that raises the motor up to 5 inches higher than standard transom mounting.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442999515,"sku":"T-H-20122","price":66.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-20122_lg__84790.1651754593.500.750.jpg?v=1785163481"},{"product_id":"cmc-65213-2-1-2-inch-static-set-back-plate-v6-outboard-jack-plate-spacer","title":"CMC 65213 2-1\/2 Inch Static Set Back Plate - V6 Outboard Jack Plate Spacer","description":"\u003cp\u003eThe CMC 65213 is a 2-1\/2 inch static set back plate that repositions an outboard motor further behind the transom, giving the boat a total of 1-1\/2 inches of adjustment travel at the mounting bracket. Moving the motor's set back further from the hull helps reduce drag, improves handling, and allows an outboard to run more efficiently at speed. This plate is designed for outboard motors up through V6, and is commonly installed together with a CMC manual or hydraulic Power-Lift transom jack to reach a combined total of 8 inches of set back for boaters who want both fixed spacing and adjustable lift in one setup.\u003c\/p\u003e\u003cp\u003eConstruction is extruded 6061-T6 aluminum alloy for a strong, corrosion-resistant plate that stands up to fresh and salt water use, and it is fastened with stainless steel hardware. The plate measures 15-1\/8 inches wide by 13-5\/8 inches tall, giving a solid mounting footprint for the motor bracket and transom bracket. At 13 pounds, it is a substantial, one-piece component intended to be bolted directly between the transom and the motor mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 65213\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Back:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Travel:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e Up through V6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Extruded 6061-T6 Aluminum Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 15-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 13-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7335723\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for outboard motors up through V6\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CMC 65213 set back plate used for?\u003c\/strong\u003e It moves an outboard motor 2-1\/2 inches further behind the transom, which reduces drag and can improve top-end speed and handling on motors up through V6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much adjustment travel does the 65213 provide?\u003c\/strong\u003e The CMC 65213 static set back plate provides 1-1\/2 inches of travel at the transom bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 65213 an adjustable jack plate?\u003c\/strong\u003e No, the 65213 is a static set back plate, not a power-lift jack. It fixes the motor 2-1\/2 inches further back from the transom; for on-the-water height adjustment, it is typically paired with a separate CMC manual or hydraulic Power-Lift transom jack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CMC 65213 be combined with a CMC Power-Lift transom jack?\u003c\/strong\u003e Yes, the 65213 static set back plate is commonly installed together with a CMC manual or hydraulic Power-Lift jack to reach a combined total of 8 inches of set back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat motors is the CMC 65213 rated for?\u003c\/strong\u003e The CMC 65213 set back plate is designed for outboard motors up through V6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CMC 65213 made from?\u003c\/strong\u003e It is constructed of extruded 6061-T6 aluminum alloy and is assembled with stainless steel fasteners for strength and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the CMC 65213 plate?\u003c\/strong\u003e The plate measures 15-1\/8 inches wide by 13-5\/8 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CMC 65213 weigh?\u003c\/strong\u003e The CMC 65213 static set back plate weighs 13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CMC 65213 include mounting hardware?\u003c\/strong\u003e Yes, stainless steel fasteners are included with the CMC 65213 set back plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 65213 work with a standard outboard mounting bracket?\u003c\/strong\u003e The CMC 65213 is a set back plate sized for motors up through V6 and mounts between the transom and the motor bracket using its included stainless steel fasteners.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027443294427,"sku":"T-H-65213","price":162.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-65213_lg__59998.1651754820.500.750.jpg?v=1785163487"},{"product_id":"bobs-machine-100-105001-clamp-on-motor-adapter-plate-for-kick-back-jac-plates-up-to-115-hp","title":"Bob's Machine 100-105001 Clamp-On Motor Adapter Plate for Kick-Back Jac Plates, Up to 115 HP","description":"\u003cp\u003eThe Bob's Machine 100-105001 Clamp-On Motor Adapter Plate is an optional accessory that allows clamp-on outboard motors to be mounted to a Bob's Machine Kick-Back Jac Plate. It is designed for use with Bob's Machine Kick Back Jacs, giving boaters with clamp-on motors the same kick-up jack plate functionality available to bolt-on motor setups.\u003c\/p\u003e\u003cp\u003eThe adapter plate is rated for outboard motors up to a maximum of 115 HP and uses the BIA bolt pattern. Delrin rollers and bearings provide smooth, long-lasting operation and pivoting without the need for chains or springs. Integrated locking pins keep the plate from kicking out when the motor is in reverse or while trailering. Pivot points are greaseable via automotive zerk fittings for easy long-term maintenance, and a motor tether attachment point is included for added safety.\u003c\/p\u003e\u003cp\u003eAs with the Kick-Back Jac Plate it is designed to work with, this adapter plate is not intended to encounter obstructions at speeds over 5 MPH, and only in the forward direction; it is not designed or intended to encounter obstructions while the boat is operated in reverse.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-105001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Clamp-On Motor Adapter Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 17.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt:\u003c\/strong\u003e 45 degree tilt up (kick up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e Up to 115 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e BIA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing System:\u003c\/strong\u003e Delrin rollers and bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Points:\u003c\/strong\u003e Greaseable, automotive zerk fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 23 x 19 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 489394319367\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Bob's Machine Kick-Back Jac Plate and Hydraulic Kick-Back Jac Plate (as optional clamp-on style kit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutboard motors up to 115 HP\u003c\/li\u003e\n\u003cli\u003eClamp-on style motor mounts\u003c\/li\u003e\n\u003cli\u003eBIA bolt pattern\u003c\/li\u003e\n\u003cli\u003eUsed with Bob's Machine Kick-Back Jac Plate and Hydraulic Kick-Back Jac Plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine 100-105001 Clamp-On Motor Adapter Plate used for?\u003c\/strong\u003e It is an optional adapter plate that allows clamp-on outboard motors to be mounted to a Bob's Machine Kick-Back Jac Plate, extending kick-up jack plate functionality to clamp-on motor setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for this adapter plate?\u003c\/strong\u003e The 100-105001 adapter plate is rated for outboard motors up to a maximum of 115 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 100-105001 adapter use a standard bolt pattern?\u003c\/strong\u003e Yes, it uses the BIA bolt pattern, matching the bolt pattern used by Bob's Machine Kick-Back Jac Plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bob's Machine 100-105001 adapter plate weigh?\u003c\/strong\u003e The 100-105001 Clamp-On Motor Adapter Plate weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this adapter plate?\u003c\/strong\u003e It measures 17.5 inches wide by 12 inches tall, with a 5.5 inch offset.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 100-105001 adapter include a tilt-up feature?\u003c\/strong\u003e Yes, it provides a 45 degree tilt up (kick up), matching the tilt of the Bob's Machine Kick-Back Jac Plate it mounts to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the plate from kicking out in reverse or while trailering?\u003c\/strong\u003e Integrated locking pins on the 100-105001 adapter plate prevent it from kicking out when the motor is in reverse or during trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the rollers and bearings made of?\u003c\/strong\u003e Delrin rollers and bearings are used, providing smooth operation and long life without the need for chains or springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Bob's Machine jack plates is the 100-105001 adapter compatible with?\u003c\/strong\u003e The 100-105001 Clamp-On Motor Adapter Plate is designed for use with Bob's Machine Kick Back Jacs, including the Kick-Back Jac Plate and the Hydraulic Kick-Back Jac Plate, as an optional clamp-on style kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the pivot points on this adapter plate maintainable?\u003c\/strong\u003e Yes, the pivot points are greaseable and use automotive zerk fittings for easy long-term maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 100-105001 adapter plate include a motor tether attachment point?\u003c\/strong\u003e Yes, a motor tether attachment point is included for added safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this adapter plate be used with obstructions at higher speeds or in reverse?\u003c\/strong\u003e No. The 100-105001 adapter plate, used with a Bob's Machine Kick-Back Jac Plate, is not designed to encounter obstructions at speeds over 5 MPH, and only in the forward direction; it is not intended for encountering obstructions while operating in reverse.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464691931,"sku":"BOB-100-105001","price":247.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/100-105001__51470.1722503405.500.750.jpg?v=1785163490"},{"product_id":"bobs-machine-shop-5-inch-transom-to-jack-plate-bolt-kit","title":"Bob's Machine Shop 5 Inch Transom to Jack Plate Bolt Kit","description":"\u003cp\u003eThe Bob's Machine Shop 5 Inch Transom to Jack Plate Bolt Kit is a mounting hardware set designed to secure a jack plate to the boat transom at a 5 inch setback. This kit falls under the jack plates hardware category and provides the fasteners needed to complete a transom-to-jack-plate installation without having to source individual bolts separately. Boat owners installing or replacing a jack plate at this setback dimension can use this kit to get the correct hardware in one package, saving trips to a hardware store and reducing the risk of mismatched fastener sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-100005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Jack Plate Setback:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377011174\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine Shop 110-100005 bolt kit used for?\u003c\/strong\u003e This bolt kit is used to mount a jack plate to a boat transom at a 5 inch setback, part number 110-100005 from Bob's Machine Shop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat setback size is this bolt kit designed for?\u003c\/strong\u003e The 110-100005 kit is designed for a 5 inch transom-to-jack-plate setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bolt kit weigh?\u003c\/strong\u003e The Bob's Machine Shop 110-100005 Transom to Jack Plate Bolt Kit weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this product fall under?\u003c\/strong\u003e This item is classified under Jack Plates, specifically as a transom-to-jack-plate mounting bolt kit, part number 110-100005.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete hardware kit or individual bolts?\u003c\/strong\u003e Part number 110-100005 is sold as a kit, bundling the bolts needed for a 5 inch transom to jack plate installation into one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bolt kit fit any jack plate setback size?\u003c\/strong\u003e No, this kit, 110-100005, is specific to a 5 inch transom-to-jack-plate setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Bob's Machine Shop 5 Inch Transom to Jack Plate Bolt Kit (110-100005) is 818377011174.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes this bolt kit?\u003c\/strong\u003e This 5 inch Transom to Jack Plate Bolt Kit, part number 110-100005, is made by Bob's Machine Shop.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465543899,"sku":"BOB-110-100005","price":28.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_9aa37d8f-666f-433d-bca8-28f6ddb9863f.jpg?v=1785348122"},{"product_id":"bobs-machine-jack-plate-to-motor-bolt-kit-stainless-steel-hardware-for-standard-bia-bolt-pattern-motors","title":"Bob's Machine Jack Plate to Motor Bolt Kit - Stainless Steel Hardware for Standard BIA Bolt Pattern Motors","description":"\u003cp\u003eThe Bob's Machine Jack Plate to Motor Bolt Kit supplies the stainless steel hardware needed to mount an outboard motor to a jack plate. The kit is intended for use during jack plate installation and is built for motors with a standard BIA bolt pattern only. It is not for use with the Bob's Machine Mini Manual Jack Plate.\u003c\/p\u003e\u003cp\u003eEach kit contains four 2.5 inch stainless steel bolts along with the matching nuts and washers needed for a complete, corrosion-resistant mounting connection: four 1\/2 inch Nylok nuts, eight flat washers, and four lock washers. The stainless steel construction resists rust and corrosion in the marine environment, and the Nylok nuts provide a self-locking fit to help the connection stay secure under vibration.\u003c\/p\u003e\u003cp\u003eThis bolt kit is a straightforward hardware replacement or upgrade for anyone installing a jack plate on a motor with a standard BIA bolt pattern, giving you all the fasteners needed in one kit rather than sourcing them individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-100001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377011150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e (4) 2.5 inch stainless steel bolts, (4) 1\/2 inch Nylok nuts, (8) flat washers, (4) lock washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNut Size:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Motors with standard BIA bolt pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e Bob's Machine Mini Manual Jack Plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with motors that have a standard BIA bolt pattern. Not for use with the Bob's Machine Mini Manual Jack Plate.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bob's Machine Jack Plate to Motor Bolt Kit?\u003c\/strong\u003e The kit includes (4) 2.5 inch stainless steel bolts, (4) 1\/2 inch Nylok nuts, (8) flat washers, and (4) lock washers, giving you all the fasteners needed to bolt a motor to a jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat motors does the Bob's Machine Jack Plate to Motor Bolt Kit fit?\u003c\/strong\u003e This kit is designed for motors with a standard BIA bolt pattern only, part number 110-100001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bolt kit be used with the Bob's Machine Mini Manual Jack Plate?\u003c\/strong\u003e No, the Bob's Machine Jack Plate to Motor Bolt Kit (110-100001) is not for use with the Bob's Machine Mini Manual Jack Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in this kit?\u003c\/strong\u003e The bolts included in kit 110-100001 are 2.5 inches long, made of stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the bolts and hardware made from?\u003c\/strong\u003e All hardware in the Bob's Machine Jack Plate to Motor Bolt Kit is stainless steel, chosen for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many washers come with this kit?\u003c\/strong\u003e The kit includes eight flat washers and four lock washers, along with the four bolts and four Nylok nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the nuts included with this kit?\u003c\/strong\u003e The kit includes four 1\/2 inch Nylok nuts, which provide a self-locking fit for the mounting bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bob's Machine Jack Plate to Motor Bolt Kit weigh?\u003c\/strong\u003e This bolt kit, part number 110-100001, weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bolt kit made by Bob's Machine?\u003c\/strong\u003e Yes, the 110-100001 Jack Plate to Motor Bolt Kit is manufactured by Bob's Machine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need this kit if my motor does not use a standard BIA bolt pattern?\u003c\/strong\u003e No, the 110-100001 kit is built specifically for motors with a standard BIA bolt pattern and is not intended for other bolt patterns.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465576667,"sku":"BOB-110-100001","price":21.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/110-100003__72368.1739462946.500.750.jpg?v=1785163490"},{"product_id":"bobs-machine-4-inch-stainless-steel-bolt-kit-3-8-16-unc-4-pack-transom-to-jack-plate-mounting-bolts","title":"Bob's Machine 4 Inch Stainless Steel Bolt Kit, 3\/8-16 UNC, 4-Pack - Transom to Jack Plate Mounting Bolts","description":"\u003cp\u003eThe Bob's Machine 4 Inch Bolt Kit (Part Number: 110-100003) is a 4-pack of stainless steel mounting bolts sized for transom to jack plate installations. Each bolt measures 4 inches in length with a 3\/8-16 UNC thread, a flat head style, and a right-hand, partially threaded thread style rated Grade 2 hardness. The stainless steel construction resists corrosion in marine environments, making this kit a practical choice for securing a jack plate to a boat transom or for other compatible marine hardware applications that call for a 4 inch, 3\/8-16 UNC bolt. The bolts ship with an unfinished, silver exterior finish and a Thread Class of 1A. This kit includes 4 bolts as a complete set, so buyers replacing worn or corroded transom-to-jack-plate hardware can order one kit to cover a full mounting job. Because the kit is sold as a fastener set rather than a full mounting assembly, it is intended to pair with the nuts, washers, or plate hardware already in use on the boat. The 4-pack format and standardized 3\/8-16 UNC thread size make it straightforward to match against existing jack plate or transom hardware without needing to source bolts individually.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-100003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 4 Inch Transom to Jack Plate Bolt Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 3\/8-16 UNC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Style:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Coverage:\u003c\/strong\u003e Partially Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Class:\u003c\/strong\u003e 1A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade:\u003c\/strong\u003e Grade 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 4.5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bob's Machine 110-100003 bolt kit?\u003c\/strong\u003e The kit includes 4 stainless steel bolts, each 4 inches long with a 3\/8-16 UNC thread, sold together as a set under part number 110-100003.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size do these bolts use?\u003c\/strong\u003e Part number 110-100003 uses a 3\/8-16 UNC thread with a right-hand, partially threaded thread style and a Thread Class of 1A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the bolts made from?\u003c\/strong\u003e The 110-100003 bolt kit is made from stainless steel, chosen for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the bolts in this kit?\u003c\/strong\u003e Each bolt in the Bob's Machine 110-100003 kit measures 4 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt kit designed to be used for?\u003c\/strong\u003e This 4-pack, sold as the 4 Inch Transom to Jack Plate Bolt Kit, is designed for securing a jack plate to a boat transom, and also suits other marine hardware that requires a 4 inch, 3\/8-16 UNC bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre washers or nuts included with the 110-100003 kit?\u003c\/strong\u003e No, the Bob's Machine 110-100003 kit contains only the 4 bolts; it does not include separate nuts or washers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade are the bolts rated?\u003c\/strong\u003e The bolts in kit 110-100003 are rated Grade 2 hardness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat head style do the bolts have?\u003c\/strong\u003e Bob's Machine part number 110-100003 uses a flat head style bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish do the bolts come in?\u003c\/strong\u003e The 110-100003 bolts have an unfinished, silver exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bolt kit weigh?\u003c\/strong\u003e The Bob's Machine 110-100003 4-pack bolt kit weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in one kit?\u003c\/strong\u003e One Bob's Machine 110-100003 kit contains 4 bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the kit?\u003c\/strong\u003e The 110-100003 bolt kit measures 6 x 4.5 x 1 inches as packaged.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465609435,"sku":"BOB-110-100003","price":21.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81jlzVqUXwL.jpg?v=1785331065"},{"product_id":"bobs-machine-shop-2-inch-bolt-kit-6-bolt-kit-for-jack-plates","title":"Bob's Machine Shop 2 Inch Bolt Kit - 6 Bolt Kit for Jack Plates","description":"\u003cp\u003eThe Bob's Machine Shop 2 Inch Bolt Kit is a 6 bolt hardware kit designed for use with jack plates. It provides the bolts needed to mount or service a jack plate assembly, giving boat owners and installers a straightforward way to complete a jack plate installation without having to source individual fasteners separately. This kit is sized at 2 inches and includes a full set of 6 bolts, matching the hardware count typically required for a jack plate mounting job.\u003c\/p\u003e\u003cp\u003eKeeping the correct bolt length and quantity on hand helps ensure a secure, properly seated jack plate mount, which is important for maintaining steering and trim performance on the transom. This bolt kit is sold as a standalone hardware set under part number 110-114002.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 2 Inch Bolt Kit (6 Bolt Kit) For Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015004\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bob's Machine Shop 2 Inch Bolt Kit?\u003c\/strong\u003e This kit includes 6 bolts, each 2 inches in length, for use with jack plates, part number 110-114002.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in this kit?\u003c\/strong\u003e The 110-114002 kit contains 6 bolts, matching the count needed for a typical jack plate mounting job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in this kit?\u003c\/strong\u003e Each bolt in the Bob's Machine Shop kit measures 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt kit used for?\u003c\/strong\u003e It is used to mount or service a jack plate, supplying the hardware needed to secure the jack plate assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 110-114002 bolt kit weigh?\u003c\/strong\u003e The Bob's Machine Shop 2 Inch Bolt Kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit sold as a complete set or individual bolts?\u003c\/strong\u003e It is sold as a complete 6 bolt set under part number 110-114002, not as individual fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include nuts, washers, or other jack plate hardware?\u003c\/strong\u003e The listed contents for part number 110-114002 are the 6 bolts; no other hardware components are specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this jack plate bolt kit?\u003c\/strong\u003e This bolt kit is manufactured by Bob's Machine Shop, part number 110-114002.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is the 110-114002 kit?\u003c\/strong\u003e It is categorized as a Jack Plates product, specifically a bolt kit for jack plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this kit to replace worn or missing jack plate bolts?\u003c\/strong\u003e Yes, the 6 bolt, 2 inch kit from Bob's Machine Shop is intended to supply the bolts needed for a jack plate mount, making it suitable for replacing worn or missing hardware.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465642203,"sku":"BOB-110-114002","price":32.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_7f0b1c50-2dc2-46d2-b7c7-261e52a442ff.jpg?v=1785348111"},{"product_id":"bobs-machine-shop-6-inch-transom-to-jack-plate-bolt-kit-part-number-110-100006","title":"Bob's Machine Shop 6 Inch Transom to Jack Plate Bolt Kit, Part Number 110-100006","description":"\u003cp\u003eThe Bob's Machine Shop 6 Inch Transom to Jack Plate Bolt Kit (Part Number 110-100006) is a mounting hardware kit sized for connecting a 6 inch jack plate to a boat transom. It is designed to give boat owners and riggers the correct hardware set on hand when installing or replacing a jack plate, rather than having to source individual bolts, nuts, and washers separately. This kit falls under Bob's Machine Shop's Jack Plates hardware line, making it a companion item for jack plate installations rather than a jack plate itself.\u003c\/p\u003e\u003cp\u003eUsing the correct bolt kit for a jack plate installation helps ensure the mounting hardware is matched to the plate's setback and mounting pattern, which supports a secure, vibration-resistant connection between the transom and the jack plate assembly. Having a dedicated kit on hand simplifies both new installations and hardware replacement when original bolts are worn, corroded, or lost.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-100006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 6 Inch Transom to Jack Plate Bolt Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377011181\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSized for 6 inch transom to jack plate mounting applications.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine Shop 6 Inch Transom to Jack Plate Bolt Kit used for?\u003c\/strong\u003e Part number 110-100006 is a bolt kit used to mount a 6 inch jack plate to a boat transom, providing the hardware needed for the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bolt kit include a jack plate?\u003c\/strong\u003e No, the 110-100006 kit is the mounting bolt hardware only; it does not include the jack plate itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 110-100006 bolt kit weigh?\u003c\/strong\u003e The Bob's Machine Shop 6 Inch Transom to Jack Plate Bolt Kit weighs 1.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size jack plate is this bolt kit designed for?\u003c\/strong\u003e This kit is designated for 6 inch transom to jack plate mounting applications, as indicated by its part name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 110-100006?\u003c\/strong\u003e Bob's Machine Shop manufactures this transom to jack plate bolt kit under part number 110-100006.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit only for jack plate installations?\u003c\/strong\u003e Yes, the 110-100006 kit is categorized under Jack Plates and is intended for transom to jack plate mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bolt kit be used to replace worn or corroded original hardware?\u003c\/strong\u003e Yes, the Bob's Machine Shop 110-100006 bolt kit can be used to replace worn, corroded, or missing transom to jack plate mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 110-100006 kit have a UPC for identification?\u003c\/strong\u003e Yes, the Bob's Machine Shop 6 Inch Transom to Jack Plate Bolt Kit carries UPC 818377011181.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this product fall under?\u003c\/strong\u003e Part number 110-100006 is listed in the Jack Plates category by Bob's Machine Shop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Bob's Machine Shop part?\u003c\/strong\u003e Yes, part number 110-100006 is a genuine Bob's Machine Shop transom to jack plate bolt kit.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465674971,"sku":"BOB-110-100006","price":28.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_f8c55a68-7099-4fbf-a3de-c33951d17a6e.jpg?v=1785348111"},{"product_id":"bobs-machine-shop-2-5-inch-6-bolt-kit-for-jack-plates","title":"Bob's Machine Shop 2.5 Inch 6-Bolt Kit for Jack Plates","description":"\u003cp\u003eThis 6-bolt kit from Bob's Machine Shop is built for mounting jack plates, supplying the full set of 2.5 inch bolts needed to secure a jack plate assembly to the transom or setback bracket. Each bolt is sized to the 2.5 inch length used across jack plate installations, giving installers a complete matched set rather than having to source individual fasteners of the correct length and thread separately. Using a matched bolt kit helps ensure consistent bolt length and grip across all six mounting points, which supports even clamping load on the jack plate assembly.\u003c\/p\u003e\u003cp\u003eThe kit is supplied as a set of six bolts, sized for jack plate mounting applications. It is intended for use during initial jack plate installation or when replacing worn, corroded, or undersized hardware on an existing setup. Because jack plate hardware is subject to constant marine exposure, keeping the mounting bolts in good condition is an important part of maintaining a secure, reliable jack plate mount.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114002A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 2.5 Inch Bolt Kit (6 Bolt Kit) for Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015011\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in this kit?\u003c\/strong\u003e The Bob's Machine Shop 2.5 Inch Bolt Kit (110-114002A) includes six bolts, sized to mount a jack plate assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in this kit?\u003c\/strong\u003e Each bolt in this jack plate bolt kit measures 2.5 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt kit used for?\u003c\/strong\u003e This kit is used to mount jack plates, providing the six bolts needed to secure the jack plate assembly to the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit sized for a specific jack plate brand?\u003c\/strong\u003e The kit is sized for 2.5 inch mounting applications used on jack plates; it is listed as a general jack plate bolt kit rather than being tied to one specific jack plate brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used to replace worn or corroded jack plate hardware?\u003c\/strong\u003e Yes, the 110-114002A bolt kit can be used to replace worn, corroded, or undersized mounting bolts on an existing jack plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this bolt kit weigh?\u003c\/strong\u003e The complete 6-bolt kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include nuts or washers?\u003c\/strong\u003e The listed contents of the 110-114002A kit are the six 2.5 inch bolts; additional hardware is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes this bolt kit?\u003c\/strong\u003e This bolt kit is manufactured by Bob's Machine Shop under part number 110-114002A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Bob's Machine Shop part?\u003c\/strong\u003e Yes, part number 110-114002A is a genuine Bob's Machine Shop jack plate bolt kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a matched bolt kit instead of individual bolts?\u003c\/strong\u003e A matched 6-bolt kit like this one ensures all mounting points on the jack plate use bolts of the same length and grip, supporting even clamping across the assembly.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465707739,"sku":"BOB-110-114002A","price":32.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_54ae1f36-3f2a-432f-92ce-11b577ef0a04.jpg?v=1785348111"},{"product_id":"bobs-machine-shop-3-5-inch-bolt-kit-6-bolt-kit-for-jack-plates","title":"Bob's Machine Shop 3.5 Inch Bolt Kit - 6 Bolt Kit for Jack Plates","description":"\u003cp\u003eThis 3.5 Inch Bolt Kit from Bob's Machine Shop is a 6 bolt kit designed for mounting jack plates on boats. The kit provides the hardware needed to secure a jack plate assembly, giving installers the bolts required for a complete mounting job without having to source individual fasteners separately. It is categorized under Jack Plates and is intended for use alongside a jack plate unit during installation or when replacing worn or corroded mounting bolts.\u003c\/p\u003e\u003cp\u003eThe kit ships as a set of six bolts, each 3.5 inches in length, sized for jack plate mounting applications. At 5 pounds, the kit has enough heft to reflect a full set of mounting-grade bolts rather than a light-duty fastener pack. Boat owners and installers use this kit when installing a new jack plate or when refreshing the mounting hardware on an existing setup, helping ensure the jack plate is fastened with a matched, complete set of bolts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114003A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 3.5 Inch Bolt Kit (6 Bolt Kit) For Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Quantity:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015035\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in this bolt kit?\u003c\/strong\u003e The Bob's Machine Shop 3.5 Inch Bolt Kit (part number 110-114003A) includes 6 bolts, each 3.5 inches long, intended for mounting a jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in the kit?\u003c\/strong\u003e This kit, part number 110-114003A, is a 6 bolt kit, meaning it contains six 3.5 inch bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in this kit?\u003c\/strong\u003e Each bolt in the Bob's Machine Shop kit measures 3.5 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt kit used for?\u003c\/strong\u003e This kit is used for mounting jack plates on boats, providing the bolt hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the kit weigh?\u003c\/strong\u003e The 3.5 Inch Bolt Kit (110-114003A) weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit sold as a complete set or individual bolts?\u003c\/strong\u003e Bob's Machine Shop part number 110-114003A is sold as a complete 6 bolt kit rather than as individual bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit fit any jack plate?\u003c\/strong\u003e This is a general bolt kit categorized under Jack Plates; specific jack plate model compatibility is not specified, so buyers should confirm bolt length and thread fit against their jack plate before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this product fall under?\u003c\/strong\u003e Part number 110-114003A is listed in the Jack Plates category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used to replace worn jack plate bolts?\u003c\/strong\u003e Yes, this 6 bolt kit of 3.5 inch bolts can be used to replace existing jack plate mounting bolts that are worn, damaged, or corroded.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Bob's Machine Shop 3.5 Inch Bolt Kit carries UPC 818377015035.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465740507,"sku":"BOB-110-114003A","price":32.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_18d03cd5-1829-4b4f-bc20-978a08235765.jpg?v=1785348111"},{"product_id":"bobs-machine-shop-3-inch-6-bolt-kit-for-jack-plates","title":"Bob's Machine Shop 3 Inch 6-Bolt Kit for Jack Plates","description":"\u003cp\u003eThe Bob's Machine Shop 3 Inch 6-Bolt Kit is a mounting hardware kit designed for jack plates, giving boat owners a complete set of bolts sized for securing a jack plate to the transom in one purchase. The kit is built around 3 inch bolts and includes six of them, matching the six mounting points common to jack plate installations. This lets installers avoid sourcing individual fasteners and ensures the bolts are matched in length and thread for a consistent, secure mount.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015028\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bob's Machine Shop 3 Inch 6-Bolt Kit?\u003c\/strong\u003e The kit includes six 3 inch bolts, part number 110-114003, sized for mounting a jack plate to the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in this kit?\u003c\/strong\u003e This jack plate bolt kit from Bob's Machine Shop contains 6 bolts, matching a typical six-point jack plate mounting pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in kit 110-114003?\u003c\/strong\u003e The bolts in the Bob's Machine Shop 6-Bolt Kit are 3 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bolt kit made for jack plates specifically?\u003c\/strong\u003e Yes, the Bob's Machine Shop 110-114003 kit is categorized and sized specifically for jack plate mounting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 6-Bolt Kit weigh?\u003c\/strong\u003e The Bob's Machine Shop 3 Inch 6-Bolt Kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this jack plate bolt kit?\u003c\/strong\u003e The UPC for the Bob's Machine Shop 3 Inch 6-Bolt Kit, part 110-114003, is 818377015028.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work with any jack plate brand?\u003c\/strong\u003e Specific jack plate model compatibility is not listed for the 110-114003 kit; confirm your jack plate uses a 3 inch, 6-bolt mounting pattern before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit include nuts and washers, or just bolts?\u003c\/strong\u003e The 110-114003 kit is listed as a bolt kit; additional hardware such as nuts or washers is not specified in the product details.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part number should I reference when ordering this kit?\u003c\/strong\u003e Reference part number 110-114003, the Bob's Machine Shop 3 Inch 6-Bolt Kit for jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Bob's Machine Shop product?\u003c\/strong\u003e Yes, the 3 Inch 6-Bolt Kit, part 110-114003, is a genuine Bob's Machine Shop product.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465773275,"sku":"BOB-110-114003","price":32.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_cdefe155-4dda-403d-9ecc-ff085b9291df.jpg?v=1785348111"},{"product_id":"bobs-machine-shop-4-inch-bolt-kit-6-bolt-kit-for-jack-plates","title":"Bob's Machine Shop 4 Inch Bolt Kit, 6 Bolt Kit for Jack Plates","description":"\u003cp\u003eThis Bob's Machine Shop 4 Inch Bolt Kit is a 6 bolt hardware set built for mounting jack plates on boats. It supplies the bolts needed to secure a jack plate assembly to the transom, giving installers a complete, ready-to-use fastener set instead of having to source individual bolts separately. As a dedicated Jack Plates category item, it is intended for use during jack plate installation or when replacing worn or corroded mounting hardware on an existing setup.\u003c\/p\u003e\u003cp\u003eUsing a matched bolt kit rather than mixed hardware helps ensure consistent thread engagement and clamping force across all six mounting points, which supports a secure, vibration-resistant jack plate installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 4 Inch Bolt Kit (6 Bolt Kit) For Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Count:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015042\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bob's Machine Shop 4 Inch Bolt Kit?\u003c\/strong\u003e The kit includes 6 bolts, each 4 inches long, sized for mounting a jack plate to a boat transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in this jack plate bolt kit?\u003c\/strong\u003e This Bob's Machine Shop kit, part number 110-114004, is a 6 bolt kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in the 110-114004 kit?\u003c\/strong\u003e The bolts in this kit are 4 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt kit used for?\u003c\/strong\u003e It is used to mount and secure a jack plate assembly to a boat's transom, part of the Jack Plates hardware category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bob's Machine Shop bolt kit weigh?\u003c\/strong\u003e The 110-114004 bolt kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bolt kit made by Bob's Machine Shop?\u003c\/strong\u003e Yes, this 4 inch, 6 bolt kit is manufactured by Bob's Machine Shop under part number 110-114004.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bolt kit be used to replace worn jack plate hardware?\u003c\/strong\u003e Yes, the 110-114004 kit is suited for replacing worn, corroded, or missing bolts on an existing jack plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this jack plate bolt kit?\u003c\/strong\u003e The UPC for Bob's Machine Shop part number 110-114004 is 818377015042.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include nuts or washers?\u003c\/strong\u003e The listed contents for part number 110-114004 are the 6 bolts; no nuts or washers are specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit specific to one jack plate brand?\u003c\/strong\u003e No specific jack plate brand compatibility is specified for this bolt kit; it is categorized generally under Jack Plates hardware.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465806043,"sku":"BOB-110-114004","price":32.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_c3ccd72d-fcb3-4e4c-aed5-6442f0cec7c7.jpg?v=1785348121"},{"product_id":"bobs-machine-shop-4-5-inch-6-bolt-kit-for-jack-plates-110-114004a","title":"Bob's Machine Shop 4.5 Inch 6-Bolt Kit for Jack Plates (110-114004A)","description":"\u003cp\u003eThe Bob's Machine Shop 4.5 Inch Bolt Kit is a 6-bolt hardware set sized for jack plate mounting installations. It supplies the fasteners needed to secure a jack plate at the 4.5 inch bolt configuration, giving installers the correct hardware on hand without having to source individual bolts. Identified by part number 110-114004A, this kit is sold as a complete 6-piece set rather than individual bolts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114004A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 4.5 Inch Bolt Kit (6 Bolt Kit) For Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Count:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015059\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bob's Machine Shop 110-114004A bolt kit include?\u003c\/strong\u003e It includes 6 bolts sized for a 4.5 inch jack plate mounting configuration, sold as part number 110-114004A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in this kit?\u003c\/strong\u003e This is a 6-bolt kit, as indicated by its name (6 Bolt Kit) and part number 110-114004A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 4.5 inch measurement refer to?\u003c\/strong\u003e The 4.5 inch size refers to the mounting configuration this Bob's Machine Shop bolt kit is designed for on jack plate installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 110-114004A bolt kit weigh?\u003c\/strong\u003e The Bob's Machine Shop 4.5 Inch Bolt Kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this jack plate bolt kit?\u003c\/strong\u003e The UPC for Bob's Machine Shop part number 110-114004A is 818377015059.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Bob's Machine Shop part?\u003c\/strong\u003e Yes, this bolt kit is a genuine Bob's Machine Shop product, part number 110-114004A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does this kit fall under?\u003c\/strong\u003e Part number 110-114004A is categorized as a Jack Plates hardware kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bolt kit fit my jack plate?\u003c\/strong\u003e The Bob's Machine Shop 110-114004A kit is built for a 6-bolt, 4.5 inch mounting pattern, so confirm your jack plate uses that same 4.5 inch, 6-bolt configuration before ordering.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465838811,"sku":"BOB-110-114004A","price":42.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_3effacc0-444e-419a-87f8-6931a00de297.jpg?v=1785348117"},{"product_id":"bobs-machine-shop-5-inch-bolt-kit-6-bolt-kit-for-jack-plates","title":"Bob's Machine Shop 5 Inch Bolt Kit - 6 Bolt Kit For Jack Plates","description":"\u003cp\u003eThis 5 inch bolt kit from Bob's Machine Shop is a 6 bolt kit designed for use with jack plates. It provides the mounting hardware needed to secure a jack plate assembly, giving boat owners a complete hardware set rather than having to source individual bolts separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 5 Inch Bolt Kit (6 Bolt Kit) For Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Count:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015066\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in this bolt kit?\u003c\/strong\u003e The Bob's Machine Shop 110-114005 kit includes 6 bolts, each 5 inches long, for mounting a jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in the 110-114005 kit?\u003c\/strong\u003e Six bolts are included, which is why this item is called the 6 bolt kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in this kit?\u003c\/strong\u003e Each bolt in this jack plate kit measures 5 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt kit used for?\u003c\/strong\u003e This kit is used for mounting jack plates, providing the hardware needed to secure the jack plate assembly to the boat transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 110-114005 bolt kit weigh?\u003c\/strong\u003e The kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes this jack plate bolt kit?\u003c\/strong\u003e This 5 inch, 6 bolt kit is made by Bob's Machine Shop, part number 110-114005.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include nuts and washers?\u003c\/strong\u003e The dossier for part 110-114005 lists only the bolt kit contents; the listing does not specify nuts or washers separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit sold as a complete set?\u003c\/strong\u003e Yes, the 110-114005 kit is sold as a 6 bolt set rather than as individual bolts.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465871579,"sku":"BOB-110-114005","price":42.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_edf06b4e-4dcb-44ee-8450-06f39c910a84.jpg?v=1785348122"},{"product_id":"bobs-machine-shop-5-5-inch-bolt-kit-6-bolt-kit-for-jack-plates-part-110-114005a","title":"Bob's Machine Shop 5.5 Inch Bolt Kit (6 Bolt Kit) for Jack Plates - Part 110-114005A","description":"\u003cp\u003eThis 5.5 inch bolt kit from Bob's Machine Shop supplies the 6 bolts needed to mount a jack plate to a boat transom. Sold as a complete 6-bolt set, it is sized for jack plate installations that call for 5.5 inch mounting bolts, giving installers a matched, ready-to-install hardware set rather than having to source individual bolts of the correct length and thread. Using a bolt kit matched to your jack plate's required length and bolt count helps ensure a secure, even mount and reduces the risk of using bolts that are too short or too long for the application. This kit falls under Bob's Machine Shop's Jack Plates hardware category and is identified by part number 110-114005A.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114005A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 5.5 Inch Bolt Kit (6 Bolt Kit) for Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Count:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015073\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in this bolt kit?\u003c\/strong\u003e The Bob's Machine Shop 5.5 Inch Bolt Kit, part number 110-114005A, is a 6 bolt kit, meaning it includes six bolts, each 5.5 inches long, for mounting a jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the bolts in this kit?\u003c\/strong\u003e Each bolt in this 6 bolt kit measures 5.5 inches, sized for jack plate installations that require that bolt length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in the kit?\u003c\/strong\u003e Six bolts are included, matching the 6-bolt mounting pattern used on jack plates that call for 5.5 inch hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this bolt kit weigh?\u003c\/strong\u003e This jack plate bolt kit, part 110-114005A, weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Bob's Machine Shop 5.5 Inch Bolt Kit (part 110-114005A) is 818377015073.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bolt kit fit my jack plate?\u003c\/strong\u003e This kit is sized for jack plate mounting applications that require 5.5 inch bolts in a 6-bolt pattern, so check your jack plate's bolt length and bolt count before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of product is this?\u003c\/strong\u003e Part number 110-114005A is listed under jack plate hardware, specifically as a bolt kit for mounting jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full mounting kit or just replacement bolts?\u003c\/strong\u003e This is a bolt kit, the 5.5 Inch Bolt Kit (6 Bolt Kit) from Bob's Machine Shop, supplying six 5.5 inch bolts for jack plate mounting rather than the jack plate itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the bolts without the jack plate?\u003c\/strong\u003e Yes, part 110-114005A is sold as a standalone 6 bolt kit for jack plate mounting, separate from the jack plate itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hardware kit made by Bob's Machine Shop?\u003c\/strong\u003e Yes, the 5.5 Inch Bolt Kit (6 Bolt Kit) for jack plates, part 110-114005A, is a Bob's Machine Shop product.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465904347,"sku":"BOB-110-114005A","price":42.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_d6863658-58de-44ea-bd34-4b59ba0e6a93.jpg?v=1785348122"},{"product_id":"bobs-machine-shop-6-bolt-kit-for-jack-plates-110-114006","title":"Bob's Machine Shop 6 Bolt Kit for Jack Plates 110-114006","description":"\u003cp\u003eThe Bob's Machine Shop 6 Bolt Kit is a complete set of mounting bolts designed for use with jack plates. This kit provides the hardware needed to secure a jack plate assembly, giving installers the fasteners required for a proper mount without having to source individual bolts separately. It is built and sold under Bob's Machine Shop part number 110-114006 and is categorized as a jack plate accessory.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 6 Bolt Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015080\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bob's Machine Shop 6 Bolt Kit?\u003c\/strong\u003e The 6 Bolt Kit (part number 110-114006) includes six bolts intended for mounting a jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt kit used for?\u003c\/strong\u003e Part number 110-114006 is a bolt kit made for use with jack plates, providing the mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 6 Bolt Kit weigh?\u003c\/strong\u003e The Bob's Machine Shop 6 Bolt Kit, part number 110-114006, weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes part number 110-114006?\u003c\/strong\u003e Bob's Machine Shop manufactures the 6 Bolt Kit under part number 110-114006.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit specific to one jack plate brand?\u003c\/strong\u003e The dossier for part number 110-114006 does not specify compatibility with a particular jack plate brand or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this product fall under?\u003c\/strong\u003e Part number 110-114006 is listed in the Jack Plates category.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 6 Bolt Kit include nuts or washers?\u003c\/strong\u003e Only bolts are specified for the 110-114006 6 Bolt Kit; no additional hardware such as nuts or washers is documented.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this bolt kit?\u003c\/strong\u003e The UPC for the Bob's Machine Shop 6 Bolt Kit, part number 110-114006, is 818377015080.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used to replace worn or missing jack plate bolts?\u003c\/strong\u003e The 6 Bolt Kit, part 110-114006, provides a full set of six bolts, making it suitable for replacing a jack plate's mounting bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 110-114006 sold as a complete kit or individual bolts?\u003c\/strong\u003e It is sold as a complete kit of six bolts, not as individual pieces.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465937115,"sku":"BOB-110-114006","price":42.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_d3ab7791-3956-41e9-bfee-2fa8b0962027.jpg?v=1785348123"},{"product_id":"bobs-machine-shop-6-5-inch-bolt-kit-6-bolt-kit-for-jack-plates-part-110-114006a","title":"Bob's Machine Shop 6.5 Inch Bolt Kit (6 Bolt Kit) for Jack Plates - Part 110-114006A","description":"\u003cp\u003eThe Bob's Machine Shop 6.5 Inch Bolt Kit is a 6-bolt hardware set (part number 110-114006A) built for mounting jack plates on a boat transom. Each kit contains six 6.5 inch bolts sized for jack plate installation, giving boat owners the mounting hardware needed to secure a jack plate assembly without having to source individual bolts separately. The complete kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003eThis bolt kit is sold under the Jack Plates hardware category and is identified by UPC 818377015097 for easy ordering and inventory matching. It is intended for use during new jack plate installation or when replacing worn, corroded, or missing mounting bolts on an existing jack plate setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114006A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Quantity:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015097\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine Shop 6.5 Inch Bolt Kit used for?\u003c\/strong\u003e This 6-bolt kit (part number 110-114006A) is used to mount a jack plate to a boat's transom, providing the bolts needed for jack plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in this kit?\u003c\/strong\u003e The kit includes 6 bolts, which is why Bob's Machine Shop lists it as the 6 Bolt Kit, part number 110-114006A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in the 110-114006A kit?\u003c\/strong\u003e Each bolt in this Bob's Machine Shop kit measures 6.5 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the bolt kit weigh?\u003c\/strong\u003e The complete 6-bolt kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures this jack plate bolt kit?\u003c\/strong\u003e Bob's Machine Shop manufactures this bolt kit, identified by part number 110-114006A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The Bob's Machine Shop 6.5 Inch Bolt Kit carries UPC 818377015097.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit genuine Bob's Machine Shop hardware?\u003c\/strong\u003e Yes, this is a genuine Bob's Machine Shop part, identified by part number 110-114006A and UPC 818377015097.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bolt kit be used to replace worn or corroded jack plate bolts?\u003c\/strong\u003e Yes, the 110-114006A 6 Bolt Kit can be used to replace worn, corroded, or missing bolts on an existing jack plate mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this product fall under?\u003c\/strong\u003e Bob's Machine Shop lists this 6.5 inch, 6-bolt kit under its Jack Plates hardware category.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465969883,"sku":"BOB-110-114006A","price":42.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_ebe98a4d-44b0-4986-b386-6ea4e28532b5.jpg?v=1785348127"},{"product_id":"bobs-machine-shop-7-inch-bolt-kit-6-bolt-kit-for-jack-plates-part-110-114007","title":"Bob's Machine Shop 7 Inch Bolt Kit (6-Bolt Kit) for Jack Plates, Part 110-114007","description":"\u003cp\u003eThe Bob's Machine Shop 7 Inch Bolt Kit, part number 110-114007, is a 6-bolt hardware kit designed for use with jack plates. Jack plates require a dedicated set of mounting bolts to secure the plate assembly to the transom and outboard, and this kit supplies that hardware as a complete set rather than requiring the buyer to source individual fasteners. The bolts in this kit are 7 inches in length, sized for jack plate mounting applications where a longer fastener is needed to pass through the plate assembly and transom.\u003c\/p\u003e\u003cp\u003eThis kit is sold as a set of 6 bolts, matching the typical bolt pattern used on jack plate installations. Ordering the correct bolt kit for a jack plate helps ensure a secure, properly fitted mount rather than mixing mismatched hardware. The kit is listed under the Jack Plates category and carries UPC 818377015103.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e 6 Bolt Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015103\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bob's Machine Shop 7 Inch Bolt Kit?\u003c\/strong\u003e This kit, part number 110-114007, includes 6 bolts, each 7 inches long, for use with jack plate installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts come in this kit?\u003c\/strong\u003e The kit contains 6 bolts, which is why it is called the 6 Bolt Kit under part number 110-114007.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length are the bolts in this kit?\u003c\/strong\u003e Each bolt in the 110-114007 kit measures 7 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt kit used for?\u003c\/strong\u003e It is used for mounting jack plates, providing the hardware needed to secure a jack plate assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this kit weigh?\u003c\/strong\u003e The Bob's Machine Shop bolt kit, part 110-114007, weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit sold with nuts and washers, or bolts only?\u003c\/strong\u003e The listed contents for part 110-114007 are 6 bolts; no additional nuts or washers are specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this jack plate bolt kit?\u003c\/strong\u003e This bolt kit is manufactured by Bob's Machine Shop under part number 110-114007.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bolt kit fit all jack plates?\u003c\/strong\u003e No specific jack plate model compatibility is listed for part 110-114007; it is categorized generally as a jack plate bolt kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this product?\u003c\/strong\u003e The UPC for the Bob's Machine Shop 7 Inch Bolt Kit, part 110-114007, is 818377015103.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy a dedicated bolt kit instead of individual hardware?\u003c\/strong\u003e The 110-114007 kit bundles all 6 required 7 inch bolts together, so installers do not need to source and match individual fasteners separately for a jack plate mount.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027466002651,"sku":"BOB-110-114007","price":44.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_a8c7c37c-2f72-411d-9dc6-c58f58c00fd4.jpg?v=1785348128"},{"product_id":"bobs-machine-shop-8-inch-bolt-kit-6-bolt-kit-for-jack-plates-110-114008","title":"Bob's Machine Shop 8 Inch Bolt Kit, 6 Bolt Kit for Jack Plates, 110-114008","description":"\u003cp\u003eThe Bob's Machine Shop 8 Inch Bolt Kit (110-114008) is a 6 bolt hardware kit designed for mounting jack plates on boats. This kit provides the fasteners needed to secure an 8 inch jack plate to the transom, giving boat owners the hardware required for a proper jack plate installation without having to source individual bolts. Jack plates allow the outboard motor to be adjusted up, down, forward, and backward relative to the transom, and a correctly matched bolt kit is essential for a secure, vibration-resistant mount.\u003c\/p\u003e\u003cp\u003eThis 6 bolt kit is sold as a complete set, making it a convenient option for boat owners installing or replacing an 8 inch jack plate. Using the correct bolt kit helps ensure the jack plate is mounted with the intended hardware count and sizing for the application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-114008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 8 Inch Bolt Kit (6 Bolt Kit) For Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Count:\u003c\/strong\u003e 6 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine Shop 110-114008 bolt kit used for?\u003c\/strong\u003e It is a 6 bolt hardware kit used to mount an 8 inch jack plate to a boat transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bolts are included in the 110-114008 kit?\u003c\/strong\u003e This kit includes 6 bolts, matching the mounting pattern of an 8 inch jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bolt kit specific to 8 inch jack plates?\u003c\/strong\u003e Yes, the 110-114008 kit is designated as the 8 Inch Bolt Kit for jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 110-114008 bolt kit weigh?\u003c\/strong\u003e The Bob's Machine Shop 8 Inch Bolt Kit weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes part number 110-114008?\u003c\/strong\u003e Part number 110-114008 is made by Bob's Machine Shop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include everything needed to install a jack plate?\u003c\/strong\u003e The 110-114008 kit provides the 6 bolts needed for mounting an 8 inch jack plate; it does not include the jack plate itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Bob's Machine Shop 8 Inch Bolt Kit?\u003c\/strong\u003e The UPC for this 6 bolt jack plate kit is 818377015110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bolt kit be used on jack plates other than 8 inch models?\u003c\/strong\u003e The 110-114008 kit is specified for 8 inch jack plates; compatibility with other sizes is not stated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 110-114008 kit sold as a complete set?\u003c\/strong\u003e Yes, it is sold as a complete 6 bolt kit rather than individual bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does the 110-114008 bolt kit fall under?\u003c\/strong\u003e The Bob's Machine Shop 110-114008 is categorized under Jack Plates.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027466035419,"sku":"BOB-110-114008","price":44.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_f128f9de-b482-4675-b23f-ff3a5ec6e313.jpg?v=1785348128"},{"product_id":"t-h-marine-jack-plate-bolt-kit-bk-1-1-2-20-x-2-3-4-inch-stainless-steel-bolts-with-lock-nuts-and-washers","title":"T-H Marine Jack Plate Bolt Kit BK-1, 1\/2-20 x 2-3\/4 Inch Stainless Steel Bolts with Lock Nuts and Washers","description":"\u003cp\u003eThe T-H Marine BK-1 Jack Plate Bolt Kit is a complete stainless steel hardware set designed to mount outboard motors to jack plates. Each kit includes four 1\/2-20 x 2-3\/4 inch fine thread stainless steel bolts with a shoulder for a precise, secure fit, along with four brass lock nuts featuring nylon inserts to resist vibration loosening, and eight flat stainless steel washers for load distribution and a clean finish. The stainless steel construction resists corrosion in saltwater and freshwater marine environments, making this kit suited for the demands of outboard rigging.\u003c\/p\u003e\u003cp\u003eThis kit is offered as a partially (half) threaded bolt configuration; boaters who need a fully threaded bolt for their setup should confirm they are ordering the correct variant, as that is a separate part. With sixteen total pieces (bolts, nuts, and washers), the BK-1 kit provides everything needed to complete a jack plate to outboard motor mounting job without sourcing individual fasteners.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e BK-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 4 bolts, 4 lock nuts, 8 washers (16 pieces total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Thread Size:\u003c\/strong\u003e 1\/2-20 inch (fine thread)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Length:\u003c\/strong\u003e 2-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Style:\u003c\/strong\u003e Shouldered bolt, partially threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWasher Material:\u003c\/strong\u003e Stainless Steel, flat style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Nut Material:\u003c\/strong\u003e Brass with nylon insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Stainless Steel, brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8.5 x 5.5 x 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572002201\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal mounting hardware kit for attaching outboard motors to jack plates; it is not restricted to a specific engine make or model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine BK-1 Jack Plate Bolt Kit include?\u003c\/strong\u003e The BK-1 kit includes four 1\/2-20 x 2-3\/4 inch stainless steel shoulder bolts, four brass lock nuts with nylon inserts, and eight stainless steel flat washers, for 16 pieces total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bolt thread size on the BK-1 kit?\u003c\/strong\u003e The bolts in the T-H Marine BK-1 kit are 1\/2-20 fine thread, measuring 2-3\/4 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bolts in the BK-1 kit fully threaded?\u003c\/strong\u003e No, the BK-1 kit uses partially (half) threaded shoulder bolts. A fully threaded version of this bolt kit is available as a separate part for buyers who need that configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the BK-1 Jack Plate Bolt Kit made from?\u003c\/strong\u003e The bolts and washers are stainless steel with a brushed finish, and the included lock nuts are brass with a nylon insert for vibration resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the BK-1 kit used for?\u003c\/strong\u003e This T-H Marine hardware kit is used to mount an outboard motor to a jack plate, providing the bolts, nuts, and washers needed for the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BK-1 kit fit a specific outboard motor make or model?\u003c\/strong\u003e The BK-1 kit is a universal mounting hardware set for attaching outboard motors to jack plates and is not limited to one engine make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the T-H Marine BK-1 kit weigh?\u003c\/strong\u003e The BK-1 Jack Plate Bolt Kit weighs 1.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the lock nuts included with the BK-1 kit reusable?\u003c\/strong\u003e The BK-1 kit's lock nuts have a nylon insert designed to resist loosening from vibration, which is standard for marine mounting hardware, though heavily worn nylon inserts should be replaced with fresh hardware for a secure mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the BK-1 and BK-2 bolt kits?\u003c\/strong\u003e The T-H Marine BK-1 kit uses partially threaded (half-threaded) bolts, while the BK-2 kit uses fully threaded bolts; both are otherwise similar hardware kits for jack plate mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the stainless steel hardware in the BK-1 kit corrosion resistant?\u003c\/strong\u003e Yes, the bolts and washers in the BK-1 kit are stainless steel, built to withstand saltwater and freshwater marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in one BK-1 kit?\u003c\/strong\u003e One T-H Marine BK-1 kit contains 16 pieces: 4 bolts, 4 lock nuts, and 8 washers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the BK-1 kit packaging?\u003c\/strong\u003e The T-H Marine BK-1 Jack Plate Bolt Kit ships in packaging measuring 8.5 x 5.5 x 5.5 inches.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":49033322823899,"sku":"T-H-BK-1-DP","price":36.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61o4SB1Hv5L.jpg?v=1785244673"},{"product_id":"lewmar-swa-jack-plate-mounting-bracket-shallow-water-anchor-mount-black-or-white","title":"Lewmar SWA Jack Plate Mounting Bracket - Shallow Water Anchor Mount, Black or White","description":"\u003cp\u003eThe Lewmar SWA Jack Plate Mounting Bracket is the genuine OEM mounting point for Lewmar's Shallow Water Anchor (SWA) system. This jack-plate style bracket transfers the anchor's holding loads into the transom or mounting surface, giving the SWA unit a rigid, marine-grade platform to pivot and drive from. Whether you're fitting a new SWA installation or replacing a bent, corroded, or worn-out original bracket, this part restores factory fit and function without needing to source a full anchor kit.\u003c\/p\u003e\u003cp\u003eBuilt to handle repeated deployment and retrieval cycles in saltwater and freshwater environments, the bracket is finished for corrosion resistance and matches Lewmar's SWA hardware line dimensionally and structurally. It bolts in using the original mounting pattern, so installation follows the same steps as the factory bracket it replaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Lewmar\u003c\/li\u003e\n\u003cli\u003eProduct Line: SWA Jack Plate Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.2 pounds\u003c\/li\u003e\n\u003cli\u003eMounting Style: Jack plate, bolt-on\u003c\/li\u003e\n\u003cli\u003eCompatibility: Lewmar SWA (Shallow Water Anchor) systems\u003c\/li\u003e\n\u003cli\u003eFinish\/Color: Black or White\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis bracket is offered in two finishes, Black and White, so you can match your boat's existing hardware and gelcoat color. Both finishes share identical dimensions, mounting pattern, and load rating, so the choice comes down to appearance only, not fit or performance. Confirm which color your current SWA hardware uses (or which you prefer for a new install) before ordering.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Black","offer_id":49047489478875,"sku":"LEW-2024028460","price":222.8,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":49047489511643,"sku":"LEW-2024028465","price":222.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_3b0a4198-28d3-4f01-a8aa-d5de2515d144.png?v=1785426479"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/i_536847cf-1e08-4929-9e81-d3cdf232dae3.jpg?v=1785356545","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trim-tilt-jack-plates-jack-plates-jack-plate-bolt-kits-hardware.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}