{"title":"Jack Plates","description":null,"products":[{"product_id":"t-h-marine-atlas-hydraulic-jack-plate-4-setback-black-fits-outboards-up-to-300-hp-625-lb-ahj-4v-b","title":"T-H Marine Atlas Series Hydraulic Jack Plate AHJ-4V-B, 4 Inch Setback, Black, Up to 300 HP","description":"\u003cp\u003eThe T-H Marine Atlas Series Hydraulic Jack Plate AHJ-4V-B is a 4 inch setback jack plate built for today's high performance outboards, rated to handle outboards up to 300 HP or 625 pounds. Its one piece design uses an innovative Rod and Slot lifting system that manages the stress of the heaviest, most powerful outboards on the market, and the hydraulic unit lifts the engine from bottom to top in just 8 seconds.\u003c\/p\u003e\u003cp\u003eUnlike jack plate systems that require a separate pump and reservoir mounted inside the transom, the AHJ-4V-B has all of its hydraulics built directly into the jack itself, simplifying installation and eliminating extra plumbing inside the boat. The transom side of the unit measures 16 3\/8 inches wide by 12 1\/2 inches tall. It ships with a relay harness and rocker switch for engine control, though mounting bolts are not included. Because setback affects handling and performance differently on every hull, T-H Marine recommends checking with your boat manufacturer or local dealer for the correct setback before installing.\u003c\/p\u003e\u003cp\u003eFinished in black, the AHJ-4V-B is constructed of alloy steel for durability in a marine environment. Note that some Atlas jack plates are made to order and can take up to 4-6 weeks; contact the seller for current stock information before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJ-4V-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Atlas Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Outboard Rating:\u003c\/strong\u003e 300 HP or 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Speed:\u003c\/strong\u003e 8 seconds from bottom to top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Side Dimensions:\u003c\/strong\u003e 16 3\/8 inches wide x 12 1\/2 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 21.5 x 18.5 x 6.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 53.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Relay harness and rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Mounting bolts not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572096101\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum outboard the AHJ-4V-B jack plate can handle?\u003c\/strong\u003e The T-H Marine Atlas AHJ-4V-B is rated to handle outboards up to 300 HP or 625 pounds, thanks to its one piece Rod and Slot lifting design built for high performance outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does the AHJ-4V-B provide?\u003c\/strong\u003e This jack plate provides 4 inches of setback. T-H Marine also offers the same Atlas design in 6, 8, 10, 12, and 14 inch setback versions if a different setback is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the Atlas jack plate lift the engine?\u003c\/strong\u003e The AHJ-4V-B lifts from bottom to top in 8 seconds, since all of the hydraulics are built directly into the jack rather than relying on a separate transom-mounted pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-4V-B require a separate hydraulic pump and reservoir?\u003c\/strong\u003e No. The Atlas AHJ-4V-B has its hydraulics built into the jack itself, which eliminates the need to install a separate pump and reservoir inside the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the AHJ-4V-B jack plate?\u003c\/strong\u003e The AHJ-4V-B is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the AHJ-4V-B jack plate made from?\u003c\/strong\u003e It is constructed of alloy steel for durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJ-4V-B weigh?\u003c\/strong\u003e The T-H Marine Atlas AHJ-4V-B weighs 53.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the transom side of this jack plate?\u003c\/strong\u003e The transom side of the AHJ-4V-B measures 16 3\/8 inches wide by 12 1\/2 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the AHJ-4V-B jack plate?\u003c\/strong\u003e The AHJ-4V-B comes with a relay harness and rocker switch. Mounting bolts are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what setback is right for my boat?\u003c\/strong\u003e T-H Marine recommends contacting your boat manufacturer or local dealer for a setback recommendation before installing the AHJ-4V-B, since adding a jack plate affects handling on every hull differently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJ-4V-B always in stock?\u003c\/strong\u003e Some Atlas jack plates, including the AHJ-4V-B, are made to order and can take up to 4-6 weeks; contact the seller for current stock information before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJ-4V-B a complete kit ready to control from the helm?\u003c\/strong\u003e Yes, the AHJ-4V-B includes a relay harness and rocker switch for engine trim\/lift control; mounting bolts are the only items not included.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991259951323,"sku":"T-H-AHJ-4V-B-DP","price":2090.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AHJ-CL_Black.jpg?v=1784498395"},{"product_id":"t-h-marine-atlas-hydraulic-jack-plate-12-inch-setback-for-outboards-up-to-300-hp-ahj-12v","title":"T-H Marine Atlas Hydraulic Jack Plate, 12 Inch Setback, AHJ-12V, Rated Up To 300 HP","description":"\u003cp\u003eThe T-H Marine Atlas Hydraulic Jack Plate (AHJ-12V) is a 12 inch setback hydraulic jack plate built for outboard motors up to 300 hp or up to 625 pounds dry weight. It uses a self-contained hydraulic pump system, so there is no separate reservoir or hydraulic lines to install, and it can raise the heaviest outboard from bottom to top in less than 8 seconds. Lifting is handled by a rod-and-slot design using high-tech engineered polymer rods that are rated 6 times more abrasion resistant than steel rods and are made from a self-lubricating material, so no regular grease lubrication is required. The hydraulic actuator is made in the U.S.A. And is designed for easy two-pin pump removal, so field maintenance and pump replacement can be done quickly without removing the whole plate. Stroke length is 5 inches with height adjustment of up to 7 inches. The transom side of the plate measures 16 3\/8 inches wide by 12 1\/2 inches tall. The plate is predrilled for Power-Pole and Minn-Kota Talon shallow water anchor bracket mounting. It ships with a relay harness and rocker switch; mounting bolts are not included. Some units are made to order, which can add lead time before shipment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJ-12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Horsepower:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Dry Weight:\u003c\/strong\u003e 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Mounting Plate Dimensions:\u003c\/strong\u003e 16 3\/8 inches wide x 12 1\/2 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Up to 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 70.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20.5 x 18 x 13.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-tech engineered polymer (lifting rods)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572069600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Relay harness and rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bolts:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePredrilled Accessory Mounting:\u003c\/strong\u003e Power-Pole and Minn-Kota Talon bracket mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStandard-version outboards up to 300 HP or up to 625 pounds dry weight\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on the T-H Marine AHJ-12V jack plate?\u003c\/strong\u003e The AHJ-12V is the 12 inch setback version of T-H Marine's Atlas hydraulic jack plate, part of a lineup also offered in 4, 6, 8, 10, and 14 inch setback sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size outboard motor can this jack plate handle?\u003c\/strong\u003e This standard version of the Atlas hydraulic jack plate is rated for outboards up to 300 hp or up to 625 pounds of dry weight; a Heavy Duty version handles engines up to 400 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the AHJ-12V lift an outboard?\u003c\/strong\u003e The Atlas AHJ-12V uses a self-contained hydraulic pump that can raise the heaviest rated outboard from bottom to top in less than 8 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting bolts included with the AHJ-12V jack plate?\u003c\/strong\u003e No, mounting bolts are not included with the T-H Marine AHJ-12V and must be sourced separately based on the boat's transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-12V need a separate hydraulic reservoir or lines?\u003c\/strong\u003e No. The AHJ-12V has a self-contained hydraulic pump system, so no external reservoir or hydraulic lines need to be installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the transom-side size of this jack plate?\u003c\/strong\u003e On the AHJ-12V, the transom side of the Atlas plate measures 16 3\/8 inches wide by 12 1\/2 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJ-12V jack plate weigh?\u003c\/strong\u003e The T-H Marine AHJ-12V weighs 70.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the lifting mechanism require regular grease?\u003c\/strong\u003e No grease is required. The AHJ-12V's lifting rods are made from a self-lubricating engineered polymer material rated 6 times more abrasion resistant than steel rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this jack plate be used with a Power-Pole or Minn-Kota Talon shallow water anchor?\u003c\/strong\u003e Yes, the AHJ-12V is predrilled for both Power-Pole and Minn-Kota Talon bracket mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the AHJ-12V jack plate?\u003c\/strong\u003e The AHJ-12V ships with a relay harness and rocker switch for operating the hydraulic actuator; mounting bolts are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much height adjustment does the AHJ-12V provide?\u003c\/strong\u003e The Atlas AHJ-12V provides up to 7 inches of height adjustment with a 5 inch stroke length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJ-12V always in stock?\u003c\/strong\u003e Some Atlas jack plates, including certain configurations of the AHJ-12V, are made to order and can take 4 to 6 weeks for stock to become available.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260016859,"sku":"T-H-AHJ-12V-DP","price":2208.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AHJ-CL_Silver.jpg?v=1784498397"},{"product_id":"t-h-marine-atlas-hydraulic-jack-plate-10-setback-self-contained-fits-outboards-up-to-300-hp-625-lb","title":"T-H Marine Atlas AHJ-10V Hydraulic Jack Plate, 10 Inch Setback, Up to 300 HP \/ 625 lb Dry Weight","description":"\u003cp\u003eThe T-H Marine Atlas Series AHJ-10V hydraulic jack plate is a 10 inch setback jack plate engineered for outboard-powered boats running engines up to 300 hp or up to 625 pounds of dry weight. It uses a self-contained hydraulic pump system, so there is no separate reservoir or hydraulic lines to install, and the actuator is made in the U.S.A. The Atlas design lifts the outboard from the bottom of its travel to the top in less than 8 seconds, giving boaters fast, on-the-water height adjustment for running trim and shallow-water access. Stroke length is 5 inches, with up to 7 inches of total height adjustment.\u003c\/p\u003e\u003cp\u003eInstead of steel lifting rods, the AHJ-10V uses hi-tech engineered polymer rods that are stated to be 6 times more abrasion resistant than steel and are made from a self-lubricating material, eliminating the need for regular grease maintenance. The pump uses an easy two-pin removal design for quick field maintenance, and installation is designed to take about half the time of comparable jack plates. The transom side of the plate measures 16 3\/8 inches wide by 12 1\/2 inches tall, and the unit is predrilled for Power-Pole and Minn-Kota Talon shallow water anchor bracket mounting. The AHJ-10V ships with a relay harness and rocker switch for control wiring; mounting bolts are not included and should be sourced separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJ-10V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Atlas Series Hydraulic Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Dry Weight Capacity:\u003c\/strong\u003e 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Side Dimensions:\u003c\/strong\u003e 16 3\/8 inches wide x 12 1\/2 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Up to 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Speed:\u003c\/strong\u003e Bottom to top in less than 8 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Rod Material:\u003c\/strong\u003e Hi-Tech Engineered Polymer, self-lubricating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 20.5 x 18.25 x 11.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 69.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Mounting Compatibility:\u003c\/strong\u003e Predrilled for Power-Pole and Minn-Kota Talon brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Relay harness and rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572069556\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 3002.1082\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the T-H Marine AHJ-10V Atlas jack plate rated for?\u003c\/strong\u003e The AHJ-10V Atlas hydraulic jack plate is rated for outboard engines up to 300 hp or up to 625 pounds of dry weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does the AHJ-10V provide?\u003c\/strong\u003e The AHJ-10V provides 10 inches of setback; the Atlas Series is also available in 4, 6, 8, 12, and 14 inch setback models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the Atlas jack plate lift the engine?\u003c\/strong\u003e Less than 8 seconds is the stated time for the AHJ-10V to lift an outboard from the bottom of its travel to the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-10V come with mounting bolts?\u003c\/strong\u003e No, mounting bolts are not included with the AHJ-10V Atlas hydraulic jack plate and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the AHJ-10V jack plate?\u003c\/strong\u003e The AHJ-10V ships with a relay harness and rocker switch for controlling the hydraulic pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the transom-side dimensions of the AHJ-10V?\u003c\/strong\u003e The transom side of the AHJ-10V Atlas jack plate measures 16 3\/8 inches wide by 12 1\/2 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJ-10V weigh?\u003c\/strong\u003e The AHJ-10V Atlas hydraulic jack plate weighs 69.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the height adjustment range on the AHJ-10V?\u003c\/strong\u003e Up to 7 inches of height adjustment is available, with a stroke length of 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJ-10V compatible with shallow water anchors like Power-Pole?\u003c\/strong\u003e Yes, the AHJ-10V Atlas jack plate is predrilled for Power-Pole and Minn-Kota Talon bracket mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the lift rods on the AHJ-10V made from?\u003c\/strong\u003e Hi-tech engineered polymer rods are used on the AHJ-10V, stated to be 6 times more abrasion resistant than steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-10V require regular grease lubrication?\u003c\/strong\u003e No, the AHJ-10V's lift rods are made from a self-lubricating material, so regular grease lubrication is not required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the standard AHJ-10V and the HD Atlas jack plate?\u003c\/strong\u003e The standard AHJ-10V is rated up to 300 hp, while the HD (Heavy Duty) version of the Atlas jack plate is rated for engines up to 400 hp.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260049627,"sku":"T-H-AHJ-10V-DP","price":2173.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AHJ-CL_Silver_b13a0e64-8e73-4a68-b8ae-be712cb5aa64.jpg?v=1784498400"},{"product_id":"t-h-marine-atlas-hydraulic-jack-plate-ahj-4v-4-setback-self-contained-hydraulic-outboard-jack-plate-up-to-300hp","title":"T-H Marine Atlas Hydraulic Jack Plate, 4 Inch Setback, Rated up to 300 HP","description":"\u003cp\u003eThe T-H Marine Atlas Hydraulic Jack Plate (AHJ-4V) is a 4 inch setback hydraulic jack plate built for outboards up to 300 hp or up to 625 pounds dry weight. It uses a self-contained hydraulic pump system, so there is no separate reservoir or hydraulic lines to install, and it can lift the engine from bottom to top in less than 8 seconds. The lifting action relies on a rod and slot design using hi-tech engineered polymer rods that are 6 times more abrasion resistant than steel rods and are made from a self-lubricating material, so no regular grease maintenance is required. The pump itself uses an easy two-pin removal system for quick field maintenance, and the hydraulic actuator is made in the U.S.A.\u003c\/p\u003e\u003cp\u003eThe transom-side mounting plate measures 16-3\/8 inches wide by 12-1\/2 inches tall, with a stroke length of 5 inches and height adjustment of up to 7 inches. The plate is predrilled for Power-Pole and Minn-Kota Talon shallow-water anchor bracket mounting, so those accessories can be added without additional drilling. Each unit ships with a relay harness and rocker switch for engine control; mounting bolts are not included. Because setback and height affect handling, contact your boat manufacturer or a local dealer for the correct setback recommendation before installing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJ-4V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Atlas Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e 300 horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Dry Weight Capacity:\u003c\/strong\u003e 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Mounting Plate Size:\u003c\/strong\u003e 16-3\/8 inches wide x 12-1\/2 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e up to 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 52.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting Rod Material:\u003c\/strong\u003e engineered polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic System:\u003c\/strong\u003e self-contained hydraulic pump, no reservoir or lines required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Speed:\u003c\/strong\u003e bottom to top in less than 8 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Mounting:\u003c\/strong\u003e predrilled for Power-Pole and Minn-Kota Talon brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e relay harness, rocker switch, owner's manual (mounting bolts not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572069402\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Manufacturer limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does the AHJ-4V jack plate provide?\u003c\/strong\u003e The T-H Marine Atlas AHJ-4V has a 4 inch setback, one of six setback options in the Atlas Series lineup (4, 6, 8, 10, 12, and 14 inch).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size engine can this jack plate handle?\u003c\/strong\u003e This jack plate is rated for outboards up to 300 hp or up to 625 pounds dry weight. T-H Marine also sells a Heavy Duty (HD) version of the Atlas jack plate rated up to 400 hp for larger outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Atlas AHJ-4V need a hydraulic reservoir or external lines?\u003c\/strong\u003e No. The Atlas AHJ-4V uses a self-contained hydraulic pump system, so there is no separate reservoir or hydraulic lines to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the jack plate lift the engine?\u003c\/strong\u003e The Atlas AHJ-4V lifts the engine from bottom to top in less than 8 seconds thanks to its rod and slot lifting design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the lift rods made of?\u003c\/strong\u003e The AHJ-4V uses hi-tech engineered polymer lift rods that are 6 times more abrasion resistant than steel rods and are made from a self-lubricating material, so they do not require regular greasing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting plate size on the transom side?\u003c\/strong\u003e The transom side of the Atlas AHJ-4V measures 16-3\/8 inches wide by 12-1\/2 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much height adjustment does the jack plate offer?\u003c\/strong\u003e The Atlas AHJ-4V has a stroke length of 5 inches and provides height adjustment of up to 7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-4V come with mounting bolts?\u003c\/strong\u003e No. Mounting bolts are not included with the T-H Marine Atlas AHJ-4V jack plate; it does ship with a relay harness and rocker switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mount a shallow-water anchor bracket on this jack plate?\u003c\/strong\u003e Yes. The Atlas AHJ-4V is predrilled for both Power-Pole and Minn-Kota Talon shallow-water anchor bracket mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Atlas AHJ-4V jack plate weigh?\u003c\/strong\u003e The T-H Marine Atlas AHJ-4V weighs 52.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the hydraulic actuator made?\u003c\/strong\u003e The hydraulic actuator on the Atlas AHJ-4V jack plate is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know what setback to order for my boat?\u003c\/strong\u003e T-H Marine recommends contacting your boat manufacturer or a local dealer for the correct setback recommendation, since setback and jack plate installation can affect boat handling.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260115163,"sku":"T-H-AHJ-4V-DP","price":1973.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AHJ-CL_Silver_b6da48c0-ad98-49d1-bf09-050b6e49f66f.jpg?v=1784498403"},{"product_id":"t-h-marine-atlas-hydraulic-jack-plate-ahj-6v-6-setback-rated-to-300hp-625-lb-outboards","title":"T-H Marine ATLAS Hydraulic Jack Plate AHJ-6V, 6 Inch Setback, Rated Up to 300 HP","description":"\u003cp\u003eThe T-H Marine ATLAS Series hydraulic jack plate, part number AHJ-6V, is a 6 inch setback jack plate built for outboard engines up to 300 hp or up to 625 pounds of dry weight. It uses a self-contained hydraulic pump system, so there is no external reservoir or hydraulic lines to plumb during installation. The lift mechanism relies on a rod-and-slot design paired with hi-tech engineered polymer lift rods that are self-lubricating, so the plate does not need regular grease maintenance the way many traditional jack plates do. The hydraulic actuator itself is made in the U.S.A. And is designed for easy two-pin removal, simplifying field maintenance if the actuator ever needs to be serviced.\u003c\/p\u003e\u003cp\u003eIn operation, the AHJ-6V lifts the outboard from the bottom to the top of its stroke in less than 8 seconds, with a stroke length of 5 inches and up to 7 inches of total height adjustment. The transom side of the plate measures 16 3\/8 inches wide by 12 1\/2 inches tall. Every ATLAS plate, including the AHJ-6V, is predrilled for Power-Pole and Minn-Kota Talon shallow-water anchor bracket mounting, letting anglers add an anchor without additional drilling. The jack plate ships with a relay harness and rocker switch for controlling the lift, though mounting bolts are not included and must be sourced separately. Some ATLAS jack plates are built to order and can take several weeks to ship, so confirm current stock before planning an install date. Because setback affects handling, contact your boat manufacturer or local dealer for a setback recommendation before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJ-6V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e ATLAS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e Up to 300 hp or up to 625 pounds dry weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Side Dimensions:\u003c\/strong\u003e 16 3\/8 inches wide x 12 1\/2 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Up to 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic System:\u003c\/strong\u003e Self-contained hydraulic pump, no reservoir or lines to install\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Rod Material:\u003c\/strong\u003e Engineered polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Speed:\u003c\/strong\u003e Bottom to top in less than 8 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Mounting:\u003c\/strong\u003e Predrilled for Power-Pole and Minn-Kota Talon bracket mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Relay harness and rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bolts:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 54.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572069457\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum engine size the AHJ-6V jack plate can handle?\u003c\/strong\u003e The T-H Marine ATLAS AHJ-6V is rated for outboard engines up to 300 hp, or up to 625 pounds of dry weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does the AHJ-6V provide?\u003c\/strong\u003e The AHJ-6V provides 6 inches of setback, positioning the outboard further behind the transom than a standard mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-6V come with mounting bolts?\u003c\/strong\u003e No, mounting bolts are not included with the AHJ-6V and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the AHJ-6V jack plate?\u003c\/strong\u003e The AHJ-6V ships with a relay harness and rocker switch for operating the hydraulic lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the AHJ-6V lift the outboard?\u003c\/strong\u003e This ATLAS jack plate lifts the outboard from the bottom to the top of its stroke in less than 8 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-6V require regular grease lubrication?\u003c\/strong\u003e No. The AHJ-6V uses hi-tech engineered polymer lift rods made from a self-lubricating material, so it does not require regular grease maintenance like traditional jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan a shallow-water anchor be mounted on the AHJ-6V?\u003c\/strong\u003e Yes, the AHJ-6V is predrilled for Power-Pole and Minn-Kota Talon bracket mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the transom-side dimensions of the AHJ-6V?\u003c\/strong\u003e The transom side of the AHJ-6V measures 16 3\/8 inches wide by 12 1\/2 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJ-6V weigh?\u003c\/strong\u003e The T-H Marine ATLAS AHJ-6V weighs 54.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJ-6V made to order?\u003c\/strong\u003e Some ATLAS jack plates are made to order and can take up to 4-6 weeks to ship, so check current stock on the AHJ-6V before planning an install date.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the standard AHJ-6V and the HD version of the ATLAS jack plate?\u003c\/strong\u003e The standard ATLAS jack plate, including the AHJ-6V, is rated up to 300 hp, while the HD version of the ATLAS line is rated for engines up to 400 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stroke length and height adjustment range of the AHJ-6V?\u003c\/strong\u003e The AHJ-6V has a stroke length of 5 inches and provides up to 7 inches of total height adjustment.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260147931,"sku":"T-H-AHJ-6V-DP","price":2001.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AHJ-CL_Silver_3e2bde4e-c723-480b-a186-f4f1a40fa1fb.jpg?v=1784498404"},{"product_id":"t-h-marine-atlas-hydraulic-jack-plate-14-setback-300-hp-max-outboards-ahj-14v","title":"T-H Marine ATLAS Hydraulic Jack Plate, 14 Inch Setback, Rated to 300 HP","description":"\u003cp\u003eThe T-H Marine ATLAS Series Hydraulic Jack Plate (AHJ-14V) is a 14 inch setback hydraulic jack plate built for outboard-powered boats, including engines up to 300 horsepower or up to 625 pounds dry weight. It uses a self-contained one-piece hydraulic pump system, so there is no separate reservoir or hydraulic lines to install. The pump lifts the heaviest outboards from bottom to top in less than 8 seconds, giving boaters fast, on-the-water control over engine height and setback for improved hole shot, top speed, and running efficiency.\u003c\/p\u003e\u003cp\u003eThe lifting mechanism uses a rod-and-slot design with high tech engineered polymer rods rated at 6 times more abrasion resistant than steel rods. The rods are made from a self-lubricating material, so no regular grease maintenance is required, and the pump features an easy two-pin removal design for quick field maintenance and actuator replacement. Stroke length is 5 inches with height adjustment of up to 7 inches. The transom-side mounting face measures 16 3\/8 inches wide by 12 1\/2 inches tall.\u003c\/p\u003e\u003cp\u003eThe jack plate ships with a relay harness and rocker switch for engine control, and is predrilled for Power-Pole and Minn-Kota Talon shallow water anchor bracket mounting. Mounting bolts are not included. Because setback needs vary by hull and engine combination, confirm the correct setback with your boat manufacturer or dealer before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJ-14V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e ATLAS Series Hydraulic Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e 300 horsepower \/ 625 pounds dry weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e up to 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Side Dimensions:\u003c\/strong\u003e 16 3\/8 inches wide x 12 1\/2 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 77.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic System:\u003c\/strong\u003e self-contained one-piece hydraulic pump (no reservoir or lines to install)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Speed:\u003c\/strong\u003e bottom to top in less than 8 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Rod Material:\u003c\/strong\u003e engineered polymer, self-lubricating, 6 times more abrasion resistant than steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor Bracket Compatibility:\u003c\/strong\u003e predrilled for Power-Pole and Minn-Kota Talon mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e relay harness, rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bolts:\u003c\/strong\u003e not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRated for outboard engines up to 300 horsepower or up to 625 pounds dry weight. Confirm correct setback recommendation with your boat manufacturer or dealer before installation.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on the T-H Marine AHJ-14V jack plate?\u003c\/strong\u003e The AHJ-14V is a 14 inch setback version of the T-H Marine ATLAS Series Hydraulic Jack Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size engine can this jack plate handle?\u003c\/strong\u003e This ATLAS hydraulic jack plate is rated for outboard engines up to 300 horsepower or up to 625 pounds of dry weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-14V come with mounting bolts?\u003c\/strong\u003e No, mounting bolts are not included with the AHJ-14V jack plate and must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the ATLAS jack plate lift the engine?\u003c\/strong\u003e The self-contained hydraulic pump on the AHJ-14V lifts the outboard from bottom to top in less than 8 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate need a separate hydraulic reservoir or lines?\u003c\/strong\u003e No, the AHJ-14V uses a self-contained one-piece hydraulic pump system, so there is no separate reservoir or hydraulic lines to run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the AHJ-14V jack plate?\u003c\/strong\u003e The AHJ-14V ships with a relay harness and rocker switch for controlling the jack plate; mounting bolts are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJ-14V compatible with shallow water anchors like Power-Pole or Minn-Kota Talon?\u003c\/strong\u003e Yes, the AHJ-14V is predrilled for both Power-Pole and Minn-Kota Talon shallow water anchor bracket mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJ-14V jack plate weigh?\u003c\/strong\u003e The T-H Marine ATLAS AHJ-14V jack plate weighs 77.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the transom side dimensions of the AHJ-14V?\u003c\/strong\u003e The transom side of the AHJ-14V measures 16 3\/8 inches wide by 12 1\/2 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ATLAS jack plate require grease maintenance?\u003c\/strong\u003e No, the AHJ-14V uses self-lubricating polymer lift rods, so regular grease lubrication is not required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much height adjustment does the AHJ-14V provide?\u003c\/strong\u003e The AHJ-14V offers up to 7 inches of height adjustment with a 5 inch stroke length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a heavy duty version of this jack plate for bigger engines?\u003c\/strong\u003e A separate heavy duty ATLAS jack plate version rated up to 400 horsepower is available as a different product from the standard AHJ-14V, which is rated to 300 horsepower.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260180699,"sku":"T-H-AHJ-14V-DP","price":2193.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AHJ-CL_Silver_5f8f7470-c51e-429d-8aa2-b2a29ba8f15e.jpg?v=1784498405"},{"product_id":"cmc-55012-two-piece-manual-jack-plate-5-1-2-in-setback-for-v6-outboards-6061-t6-aluminum","title":"CMC 55012 Two-Piece Manual Jack Plate, 5-1\/2 Inch Transom Setback","description":"\u003cp\u003eThe CMC 55012 is a two-piece manual jack plate built to move your outboard away from the transom, giving you a 5-1\/2 inch setback that helps improve handling, top-end speed, and prop clearance. The two-piece design lets you dial in motor height independently from setback, with 5 inches of slot adjustment at the motor mounting bracket and 1-1\/2 inches of adjustment at the transom bracket, so you can fine-tune the mount to your boat and motor combination.\u003c\/p\u003e\u003cp\u003eConstruction is 6061 T6 extruded aluminum alloy, a marine-grade alloy chosen for its strength-to-weight ratio and resistance to corrosion, paired with stainless steel fasteners throughout for long-term durability in a saltwater or freshwater environment. The two-piece CMC line is also offered with a 4 inch setback for boaters who need a shorter reach from the transom; the 55012 is the 5-1\/2 inch setback version. Because the right amount of setback and its effect on handling varies by hull and outboard, CMC recommends checking with your boat manufacturer or local dealer for a setback recommendation specific to your boat before installing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 55012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e Two-Piece Manual Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback from Transom:\u003c\/strong\u003e 5-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Mounting Bracket Slot Adjustment:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Bracket Adjustment:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061 T6 extruded aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 16.5 x 12.7 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739697550122\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis jack plate does not carry a locked list of approved boats or outboards; because the effect of setback on handling depends on the hull and motor, CMC recommends contacting your boat manufacturer or local dealer for a setback recommendation before installing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does the CMC 55012 jack plate provide?\u003c\/strong\u003e The CMC 55012 provides a 5-1\/2 inch setback from the transom, moving the outboard back from the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CMC 55012 a one-piece or two-piece jack plate?\u003c\/strong\u003e It is a two-piece manual jack plate, which allows the motor mounting bracket and the transom bracket to adjust independently of each other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much adjustment does the CMC 55012 allow?\u003c\/strong\u003e There is 5 inches of slot adjustment at the motor mounting bracket and 1-1\/2 inches of adjustment at the transom bracket on the CMC 55012.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CMC 55012 jack plate made of?\u003c\/strong\u003e It is made of 6061 T6 extruded aluminum alloy with stainless steel fasteners for strength and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CMC 55012 jack plate weigh?\u003c\/strong\u003e The CMC 55012 weighs 25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the CMC 55012?\u003c\/strong\u003e The CMC 55012 measures approximately 16.5 x 12.7 x 7 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a 4 inch setback version of this jack plate available?\u003c\/strong\u003e Yes, CMC offers the two-piece manual jack plate in a 4 inch setback as a separate part in addition to the 5-1\/2 inch setback of the 55012.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes raising a boat's motor with the CMC 55012 improve performance?\u003c\/strong\u003e A jack plate setback like the CMC 55012 is used to move the outboard away from the transom, which can affect handling and performance, but CMC advises checking with your boat manufacturer or local dealer for the setback recommendation appropriate to your specific boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CMC 55012 jack plate?\u003c\/strong\u003e The CMC 55012 jack plate has a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fasteners on the CMC 55012 corrosion resistant?\u003c\/strong\u003e Yes, the CMC 55012 uses stainless steel fasteners for maximum strength and durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the CMC 55012?\u003c\/strong\u003e The CMC 55012 is a complete two-piece manual jack plate unit with its stainless steel fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs manual adjustment required on the CMC 55012, or is it hydraulic?\u003c\/strong\u003e The CMC 55012 is a manual jack plate, meaning setback and height adjustments are made by hand rather than hydraulically.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260344539,"sku":"T-H-55012","price":386.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ml-65-10-manual-jack-plate-10-setback-cmc-manual-jack-plates-28281886965803.jpg?v=1784498410"},{"product_id":"t-h-marine-atlas-hydraulic-jack-plate-8-inch-setback-outboards-up-to-300-hp-625-lb-ahj-8v","title":"T-H Marine ATLAS Hydraulic Jack Plate, AHJ-8V, 8 Inch Setback, Up to 300 HP \/ 625 lb","description":"\u003cp\u003eThe T-H Marine ATLAS Hydraulic Jack Plate (AHJ-8V) is an 8 inch setback hydraulic jack plate built for outboard engines up to 300 hp or up to 625 pounds dry weight. It uses a self-contained one-piece hydraulic pump system, so there is no separate reservoir or hydraulic lines to install, and it lifts the engine from bottom to top in less than 8 seconds. The lifting mechanism uses a rod and slot design with high-tech engineered polymer rods rated up to six times more abrasion resistant than steel rods, and the rods are made from a self-lubricating material that eliminates the need for regular grease maintenance. A two-pin pump removal design allows for quick field maintenance and actuator replacement without removing the whole plate. The transom-side mounting plate measures 16 3\/8 inches wide by 12 1\/2 inches tall, with a stroke length of 5 inches and up to 7 inches of total height adjustment. The plate ships with a relay harness and rocker switch for engine control, and it is predrilled for Power-Pole and Minn-Kota Talon shallow water anchor bracket mounting. Mounting bolts are not included, and boat manufacturers or local dealers should be consulted for the correct setback recommendation for a specific boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJ-8V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Dry Weight Capacity:\u003c\/strong\u003e 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Mounting Plate Dimensions:\u003c\/strong\u003e 16 3\/8 inches wide x 12 1\/2 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Adjustment Range:\u003c\/strong\u003e Up to 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Speed:\u003c\/strong\u003e Bottom to top in less than 8 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 66.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 20.5 x 17.5 x 11 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Relay harness and rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Mounting Compatibility:\u003c\/strong\u003e Predrilled for Power-Pole and Minn-Kota Talon brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Mounting bolts not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated for outboard engines up to 300 hp or up to 625 pounds dry weight\u003c\/li\u003e\n\u003cli\u003eContact your boat manufacturer or local dealer for the correct setback recommendation for your particular boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on the AHJ-8V jack plate?\u003c\/strong\u003e The T-H Marine AHJ-8V ATLAS Hydraulic Jack Plate has an 8 inch setback, positioning the outboard 8 inches further behind the transom than a standard mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size engine can this jack plate handle?\u003c\/strong\u003e The AHJ-8V is rated for outboard engines up to 300 hp or up to 625 pounds of dry weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ATLAS jack plate require a separate hydraulic reservoir or lines?\u003c\/strong\u003e No. The ATLAS Hydraulic Jack Plate uses a self-contained one-piece hydraulic pump system, so there is no reservoir or external hydraulic lines to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the jack plate lift the engine?\u003c\/strong\u003e The AHJ-8V lifts the outboard from bottom to top in less than 8 seconds thanks to its one-piece hydraulic pump design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the transom mounting plate?\u003c\/strong\u003e On the AHJ-8V, the transom side of the plate measures 16 3\/8 inches wide by 12 1\/2 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much height adjustment does the jack plate provide?\u003c\/strong\u003e The ATLAS AHJ-8V provides up to 7 inches of height adjustment with a 5 inch stroke length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-8V come with mounting bolts?\u003c\/strong\u003e No. Mounting bolts are not included with the T-H Marine AHJ-8V ATLAS Hydraulic Jack Plate and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the jack plate?\u003c\/strong\u003e The AHJ-8V ships with a relay harness and rocker switch for controlling engine lift and lower operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJ-8V compatible with shallow water anchors like Power-Pole?\u003c\/strong\u003e Yes. The AHJ-8V is predrilled for Power-Pole and Minn-Kota Talon bracket mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the jack plate require regular grease lubrication?\u003c\/strong\u003e No. The ATLAS AHJ-8V uses self-lubricating polymer lifting rods, so it does not require regular grease maintenance like many competing jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJ-8V weigh?\u003c\/strong\u003e The T-H Marine AHJ-8V ATLAS Hydraulic Jack Plate weighs 66.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the lifting rods made from?\u003c\/strong\u003e The AHJ-8V uses high-tech engineered polymer lifting rods rated up to six times more abrasion resistant than steel rods.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260410075,"sku":"T-H-AHJ-8V-DP","price":2139.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AHJ-CL_Silver_5e4b3670-2e61-4a45-bd19-1fd0e72e9e2f.jpg?v=1784498412"},{"product_id":"t-h-marine-atlas-hot-shot-jack-plate-hole-shot-plate-10-inch-v-model-ahjhsp-10v","title":"T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate AHJHSP-10V, Fits ATLAS Hydraulic Jack Plates","description":"\u003cp\u003eThe T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate (AHJHSP-10V) is a performance upgrade designed to improve hole shot and reduce bow rise on boats equipped with ATLAS hydraulic jack plates. By improving water flow and lift at takeoff, the Hot Shot Plate helps a boat get on plane faster and accelerate more efficiently, which is especially useful when running heavy loads, a full crew, or challenging water conditions. It is built to integrate seamlessly with ATLAS hydraulic jack plates for a direct, purpose-matched fit.\u003c\/p\u003e\u003cp\u003eConstructed from durable, corrosion-resistant marine-grade plastic in an off-white finish, the Hot Shot Plate is engineered to hold up to harsh marine environments while adding minimal weight to the jack plate assembly. Installation is straightforward, allowing boat owners to add the performance upgrade without extensive modification. Whether used for tournament fishing or everyday cruising, this plate gives boaters improved acceleration, better visibility during takeoff by minimizing bow rise, and more consistent handling when the boat is loaded down.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-10V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Atlas Hole Shot Plate, 10 Inch, V Style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Off-white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 16 x 8.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.77 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070156\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits ATLAS hydraulic jack plates\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine AHJHSP-10V Hot Shot Plate do?\u003c\/strong\u003e The AHJHSP-10V Hot Shot Plate improves hole shot and reduces bow rise on boats with ATLAS hydraulic jack plates, helping the boat get on plane faster and accelerate more efficiently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat jack plates does the AHJHSP-10V fit?\u003c\/strong\u003e This Hole Shot Plate is designed to integrate seamlessly with ATLAS hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the AHJHSP-10V Hot Shot Plate made from?\u003c\/strong\u003e It is made from durable, corrosion-resistant marine-grade plastic in an off-white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-10V weigh?\u003c\/strong\u003e The AHJHSP-10V Hot Shot Plate weighs 2.77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the AHJHSP-10V Hole Shot Plate?\u003c\/strong\u003e The plate measures 4 x 16 x 8.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Hot Shot Plate reduce bow rise?\u003c\/strong\u003e Yes, minimizing bow rise for better visibility and control during takeoff is one of the plate's primary functions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-10V easy to install?\u003c\/strong\u003e Yes, it is designed for easy installation for quick performance gains on a compatible ATLAS hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-10V help with heavy loads?\u003c\/strong\u003e Yes, it enhances lift and acceleration with heavy loads, making it useful for tournament fishing or cruising with a full crew.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine AHJHSP-10V?\u003c\/strong\u003e The UPC for the AHJHSP-10V Hot Shot Plate is 733572070156.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-10V a standalone jack plate?\u003c\/strong\u003e No, it is a Hole Shot Plate accessory engineered to be added onto an existing ATLAS hydraulic jack plate, not a jack plate on its own.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260541147,"sku":"T-H-AHJHSP-10V-DP","price":89.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043.jpg?v=1784498426"},{"product_id":"t-h-marine-atlas-hot-shot-jack-plate-hole-shot-plate-4-inch-fits-atlas-hydraulic-jack-plates-ahjhsp-4v","title":"T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate AHJHSP-4V","description":"\u003cp\u003eThe T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate (AHJHSP-4V) is a performance add-on plate engineered to improve hole shot and reduce bow rise on boats running an ATLAS hydraulic jack plate. By reshaping water flow and lift at takeoff, it helps the boat come up on plane faster and more level, which is especially useful when running heavy loads, a full crew, or challenging water conditions. The plate is designed to integrate seamlessly with ATLAS hydraulic jack plates, so it bolts onto the existing jack plate setup rather than requiring a separate mounting system.\u003c\/p\u003e\u003cp\u003eConstruction is durable, corrosion-resistant marine-grade metal built to hold up to sustained exposure to water and weather. Installation is straightforward, giving boaters a quick way to gain a performance edge without adding complexity to the jack plate or replacing it. This is a popular upgrade for tournament anglers and any boat owner who wants quicker acceleration, better visibility off the beach or ramp from reduced bow rise, and more efficient takeoff performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-4V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1875 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 to 900 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070002\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to integrate seamlessly with ATLAS hydraulic jack plates. No specific engine make, horsepower, or model fitment is listed for this plate.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference or replacement part numbers are listed for the AHJHSP-4V.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine AHJHSP-4V Hot Shot plate do?\u003c\/strong\u003e It improves hole shot and reduces bow rise by enhancing water flow and lift at takeoff, helping the boat get on plane faster, especially with heavy loads or a full crew.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-4V fit any jack plate?\u003c\/strong\u003e The AHJHSP-4V is designed to integrate seamlessly with ATLAS hydraulic jack plates rather than jack plates in general.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJHSP-4V made of?\u003c\/strong\u003e The AHJHSP-4V Hot Shot plate is constructed from durable, corrosion-resistant metal built for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-4V weigh?\u003c\/strong\u003e The T-H Marine AHJHSP-4V weighs 1.1875 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of this Hot Shot plate?\u003c\/strong\u003e The AHJHSP-4V is rated for a load capacity of 300 to 900 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the AHJHSP-4V difficult?\u003c\/strong\u003e No, the ATLAS Hot Shot plate is designed for easy installation as a bolt-on upgrade to an existing ATLAS hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AHJHSP-4V reduce bow rise on my boat?\u003c\/strong\u003e Yes, minimizing bow rise is one of the primary functions of the AHJHSP-4V, which improves visibility and control during takeoff.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other sizes of this Hot Shot plate available?\u003c\/strong\u003e The AHJHSP-4V is one part number in the ATLAS Hot Shot plate lineup; other setback sizes are sold under different part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-4V a genuine T-H Marine part?\u003c\/strong\u003e Yes, the AHJHSP-4V is a genuine T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum height listed for the AHJHSP-4V?\u003c\/strong\u003e The AHJHSP-4V has a listed minimum height of 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-4V come with cross-reference or OEM replacement numbers?\u003c\/strong\u003e No OEM cross-reference or replacement part numbers are listed for the AHJHSP-4V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho is the AHJHSP-4V Hot Shot plate best suited for?\u003c\/strong\u003e Boaters running an ATLAS hydraulic jack plate who want quicker acceleration and improved hole shot, including tournament anglers running heavy loads, will benefit most from the AHJHSP-4V.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260606683,"sku":"T-H-AHJHSP-4V-DP","price":57.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043_f5406c0a-4f7e-4eef-b405-2f762c107ad6.jpg?v=1784498435"},{"product_id":"t-h-marine-atlas-hot-shot-hole-shot-plate-6-inch-v-fits-atlas-hydraulic-jack-plates-ahjhsp-6v","title":"T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate, 6 Inch, AHJHSP-6V","description":"\u003cp\u003eThe T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate (AHJHSP-6V) is a 6 inch add-on plate that attaches to the bottom of an ATLAS hydraulic jack plate to sharpen hole shot performance. By dramatically reducing water drag at takeoff and acting as a center trim tab, the Hot Shot Plate delivers an improvement of 18 to 20 percent in hole shot, translating to roughly 2 to 3 seconds faster out of the hole. Beyond the initial launch, the plate also helps the boat stay on plane and virtually eliminates porpoising at lower speeds, giving tournament anglers and weekend boaters alike more confidence when running heavy loads or a full crew.\u003c\/p\u003e\u003cp\u003eBuilt from aluminum with a silver finish, the plate is designed for durability in demanding conditions and is rated for use in salt water. It mounts via a transom mount configuration and is engineered to integrate seamlessly with ATLAS hydraulic jack plates for a straightforward, bolt-on installation that requires no complex modification.\u003c\/p\u003e\u003cp\u003eThis 6 inch version (AHJHSP-6V) is one of several Hot Shot Plate sizes T-H Marine offers; 4 inch and 10 inch versions are also available as separate part numbers, so confirm the 6 inch size is correct for your jack plate before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-6V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e ATLAS Series Hot Shot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Transom mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Shot Improvement:\u003c\/strong\u003e 18 to 20 percent faster\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits most ATLAS hydraulic jack plates, both standard and heavy duty versions. It will not work with the Bass Cat Atlas jack plate.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the AHJHSP-6V Hot Shot Plate actually do?\u003c\/strong\u003e It attaches to the bottom of an ATLAS hydraulic jack plate and reduces water drag at takeoff, improving hole shot by 18 to 20 percent, which works out to roughly 2 to 3 seconds faster getting out of the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AHJHSP-6V fit my jack plate?\u003c\/strong\u003e The AHJHSP-6V is designed to fit most ATLAS hydraulic jack plates, including both standard and heavy duty versions, but it will not work with the Bass Cat Atlas jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-6V weigh?\u003c\/strong\u003e The 6 inch T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate weighs 1.59 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hot Shot Plate made from?\u003c\/strong\u003e The AHJHSP-6V is constructed from aluminum with a silver finish, built to hold up in harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-6V rated for saltwater use?\u003c\/strong\u003e Yes, the AHJHSP-6V Hot Shot Plate is recommended for use in salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this plate help with porpoising at lower speeds?\u003c\/strong\u003e Yes, in addition to improving hole shot, the Hot Shot Plate helps the boat stay on plane and virtually eliminates porpoising at lower speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the AHJHSP-6V different from the 4 inch or 10 inch Hot Shot plates?\u003c\/strong\u003e The AHJHSP-6V is the 6 inch version of the ATLAS Hot Shot Jack Plate Hole Shot Plate; T-H Marine also offers 4 inch and 10 inch versions as separate part numbers, so the correct size should be matched to your jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the AHJHSP-6V installed?\u003c\/strong\u003e It uses a transom mount configuration and is designed to integrate seamlessly with ATLAS hydraulic jack plates for straightforward attachment to the bottom of the jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the AHJHSP-6V come in?\u003c\/strong\u003e The AHJHSP-6V Hot Shot Plate has a silver aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hot Shot Plate work as a trim tab too?\u003c\/strong\u003e Yes, the AHJHSP-6V serves as a center trim tab in addition to reducing water drag at takeoff, which contributes to its hole shot performance gains.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260737755,"sku":"T-H-AHJHSP-6V-DP","price":62.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043_5a979233-312f-46df-b40f-e96b126412bb.jpg?v=1784498439"},{"product_id":"t-h-marine-atlas-hot-shot-jack-plate-hole-shot-plate-ahjhsp-8v-fits-all-atlas-hydraulic-jack-plates","title":"T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate, Model AHJ-8V","description":"\u003cp\u003eThe T-H Marine ATLAS Series Hot Shot Jack Plate Hole Shot Plate (AHJHSP-8V) is a performance upgrade designed to attach to ATLAS hydraulic jack plates and improve how a boat comes onto plane. By enhancing water flow and lift at takeoff, the Hot Shot Plate helps the boat get on plane faster and reduces bow rise during acceleration, giving the driver better visibility and control right at the critical moment of takeoff. This is especially useful when running heavy loads, a full crew, or tournament-ready gear, where slower hole shot and pronounced bow rise are common problems.\u003c\/p\u003e\u003cp\u003eThe plate is built from durable, marine-grade material designed to hold up in harsh, wet marine environments without compromising reliability. It is engineered to integrate seamlessly with ATLAS hydraulic jack plates, specifically the AHJ-8V model, so installation adds performance without requiring a different jack plate setup. Installation is straightforward, letting boaters add the performance benefit without extensive modification.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-8V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e ATLAS Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hot Shot Jack Plate Hole Shot Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12 x 12 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits ATLAS hydraulic jack plates, model AHJ-8V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned to fit ATLAS hydraulic jack plates, model AHJ-8V\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate (AHJHSP-8V) do?\u003c\/strong\u003e The AHJHSP-8V is designed to improve hole shot and reduce bow rise as a boat comes onto plane, helping the boat get up and moving faster, especially with heavy loads or a full crew aboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat jack plates does the AHJHSP-8V fit?\u003c\/strong\u003e This Hole Shot Plate is designed to integrate with ATLAS hydraulic jack plates, specifically model AHJ-8V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJHSP-8V made of?\u003c\/strong\u003e The Hot Shot Jack Plate Hole Shot Plate is constructed from durable plastic material designed to hold up in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-8V weigh?\u003c\/strong\u003e The T-H Marine AHJHSP-8V weighs 2.37 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the AHJHSP-8V Hole Shot Plate?\u003c\/strong\u003e The AHJHSP-8V measures 12 x 12 x 12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AHJHSP-8V work with any jack plate, or only ATLAS models?\u003c\/strong\u003e The AHJHSP-8V is engineered specifically to integrate with ATLAS hydraulic jack plates, model AHJ-8V, rather than being a universal fit for all jack plate brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-8V easy to install?\u003c\/strong\u003e Yes, the T-H Marine Hot Shot Jack Plate Hole Shot Plate is designed for easy installation for a quick performance gain once mounted to a compatible ATLAS jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I add a Hole Shot Plate to my jack plate?\u003c\/strong\u003e Adding the AHJHSP-8V helps a boat plane out quicker and reduces bow rise, which improves visibility and control during takeoff, particularly useful for tournament fishing or running with heavy loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-8V reduce bow rise?\u003c\/strong\u003e Yes, minimizing bow rise for better visibility and control during acceleration is one of the primary functions of the ATLAS Hot Shot Jack Plate Hole Shot Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-8V corrosion resistant?\u003c\/strong\u003e The T-H Marine Hot Shot Plate is built from durable, corrosion-resistant marine construction intended for harsh boating environments.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260770523,"sku":"T-H-AHJHSP-8V-DP","price":82.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043_8d7fb5d4-52ea-4f40-ba35-ba6199f2f5a4.jpg?v=1784498449"},{"product_id":"t-h-marine-atlas-hot-shot-hole-shot-plate-12-faster-hole-shot-for-atlas-hydraulic-jack-plates-ahjhsp-12v","title":"T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate, 12 Inch, Fits AHJ-12V Hydraulic Jack Plates","description":"\u003cp\u003eThe T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate (AHJHSP-12V) is a performance upgrade designed to integrate seamlessly with ATLAS hydraulic jack plates, specifically fitting the AHJ-12V model. Engineered to enhance hole shot and reduce bow rise, this plate helps your boat get on plane faster, which is especially useful when running heavy loads or in challenging water conditions. By improving water flow and lift at takeoff, the Hot Shot Plate delivers quicker acceleration and better overall efficiency off the line, giving tournament anglers and everyday boaters alike an edge when it matters most.\u003c\/p\u003e\u003cp\u003eConstructed from durable plastic with a chrome finish, the plate is built to handle harsh marine environments while resisting corrosion. It is a simple bolt-on addition to a compatible ATLAS hydraulic jack plate and requires no complex modification, making it an easy way to pick up meaningful performance gains. The 12 inch size matches the AHJ-12V jack plate it is designed for, and the unit measures 16 x 3.25 x 10.5 inches with a shipping weight of 3.44 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJHSP-12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e ATLAS Series Hot Shot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 16 x 3.25 x 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 16 x 11.1 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.44 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits ATLAS hydraulic jack plate model AHJ-12V\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine ATLAS Hot Shot Jack Plate Hole Shot Plate do?\u003c\/strong\u003e The AHJHSP-12V Hot Shot Plate is engineered to enhance hole shot and reduce bow rise, helping a boat get on plane faster, especially with heavy loads or in challenging conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich jack plate does the AHJHSP-12V fit?\u003c\/strong\u003e This hole shot plate is designed to integrate seamlessly with ATLAS hydraulic jack plates, specifically the AHJ-12V model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJHSP-12V compatible with manual jack plates?\u003c\/strong\u003e No, the AHJHSP-12V is built to fit ATLAS hydraulic jack plates (AHJ-12V); it is not the same product as T-H Marine's Z-Lock manual jack plate hole shot plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the AHJHSP-12V hole shot plate?\u003c\/strong\u003e The AHJHSP-12V is a 12 inch hole shot plate, matched to the 12 inch AHJ-12V ATLAS hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the AHJHSP-12V made from?\u003c\/strong\u003e T-H Marine builds the AHJHSP-12V Hot Shot Plate from durable plastic with a chrome finish, designed to hold up in harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJHSP-12V weigh?\u003c\/strong\u003e The AHJHSP-12V Hot Shot Plate weighs 3.44 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the AHJHSP-12V?\u003c\/strong\u003e The item measures 16 x 3.25 x 10.5 inches; the package it ships in measures 16 x 11.1 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Hot Shot Plate reduce porpoising at low speed?\u003c\/strong\u003e The AHJHSP-12V improves water flow and lift at takeoff for quicker acceleration; it is designed to enhance hole shot and reduce bow rise on the ATLAS AHJ-12V jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the AHJHSP-12V difficult?\u003c\/strong\u003e The AHJHSP-12V is designed for easy installation, attaching directly to a compatible ATLAS AHJ-12V hydraulic jack plate for quick performance gains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJHSP-12V come with mounting hardware?\u003c\/strong\u003e The AHJHSP-12V is sold as the Hot Shot hole shot plate itself, sized and designed to bolt onto the ATLAS AHJ-12V hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho benefits most from adding the AHJHSP-12V to a jack plate?\u003c\/strong\u003e Tournament anglers and boaters running heavy loads or a full crew benefit most from the AHJHSP-12V, since it is engineered to improve hole shot and reduce bow rise on takeoff.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260803291,"sku":"T-H-AHJHSP-12V-DP","price":103.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-series-hot-shot-jack-plate-hole-shot-plate-33067855872043_efe11c8b-0a05-4645-a384-f5559cff44fd.jpg?v=1784498449"},{"product_id":"t-h-marine-atlas-jack-plate-rocker-switch-ahjswitch-1-for-atlas-hydraulic-jack-plates","title":"T-H Marine AHJSWITCH-1 Rocker Switch for Atlas Jack Plates","description":"\u003cp\u003eThe T-H Marine AHJSWITCH-1 is a rocker switch built as a direct replacement component for Atlas hydraulic jack plates. When the original control switch on a jack plate wears out, sticks, or fails to make contact, this rocker switch restores reliable operation of the jack plate's height and trim adjustment without needing to replace the entire actuator or wiring harness. It is molded from durable plastic with a black housing and is rated IP67 for protection against water intrusion and vibration, making it suited to the marine environment it operates in at the transom. The switch uses a hinge-lever rocker actuator with two positions and a 1-way circuit, wired through screw terminal connections for a secure, corrosion-resistant electrical connection. Contact is made through copper contacts in a normally-open configuration, and the switch is rated for 2 amps at 2 volts of control current, consistent with its role as a low-current control switch that signals a relay or actuator rather than carrying the jack plate's main motor load directly. It measures 6 inches by 2.75 inches by 2 inches and can be panel-mounted or surface-mounted depending on the installation. This part is designed to fit Atlas jack plates and is intended for boat owners and installers replacing a failed or damaged factory switch as part of routine jack plate maintenance or repair.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJSWITCH-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Rocker Switch for Atlas Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Hinge lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 2 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 2 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel mount or surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 2.75 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572081459\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAtlas hydraulic jack plates\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine AHJSWITCH-1?\u003c\/strong\u003e The AHJSWITCH-1 is a rocker switch made to replace the factory control switch on Atlas hydraulic jack plates, restoring height and trim control when the original switch fails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch fit my jack plate?\u003c\/strong\u003e The AHJSWITCH-1 is designed to fit Atlas hydraulic jack plates as a direct replacement switch component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the electrical ratings of this switch?\u003c\/strong\u003e The AHJSWITCH-1 rocker switch is rated for 2 amps at 2 volts and uses a normally-open contact configuration, since it functions as a low-current control switch rather than carrying the jack plate's main motor current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the switch housing made from?\u003c\/strong\u003e It is molded from durable plastic in a black finish, sized for marine control panels and rated IP67 against water and vibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the AHJSWITCH-1?\u003c\/strong\u003e The switch measures 6 inches by 2.75 inches by 2 inches and weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the switch wired in?\u003c\/strong\u003e The AHJSWITCH-1 connects using screw terminal connectors, allowing a secure electrical connection during installation or replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be panel mounted or surface mounted?\u003c\/strong\u003e Yes, the AHJSWITCH-1 supports both panel mounting and surface mounting depending on how the jack plate control is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does the rocker switch have?\u003c\/strong\u003e It is a 2-position rocker switch operated by a hinge-lever actuator on a single 1-way circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine T-H Marine replacement part?\u003c\/strong\u003e Yes, the AHJSWITCH-1 is a genuine T-H Marine rocker switch built specifically as a replacement component for Atlas jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch include cross-reference or OEM replacement numbers?\u003c\/strong\u003e No OEM cross-reference or replaces numbers are listed for the AHJSWITCH-1; it is identified by its own T-H Marine part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch rated for outdoor marine use?\u003c\/strong\u003e Yes, the AHJSWITCH-1 carries an IP67 ingress protection rating, meaning it is sealed against water and vibration for use in the marine environment around a jack plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the switch contact material affect?\u003c\/strong\u003e The AHJSWITCH-1 uses copper contacts in a normally-open configuration, providing reliable electrical continuity when the rocker is actuated.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260967131,"sku":"T-H-AHJSWITCH-1-DP","price":28.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/replacement-relay-harness-for-hydraulic-jack-plates-2014-ahjrelaykit-2-dp-atlas-jack-plate-replacement-parts-28008702935083.jpg?v=1784498455"},{"product_id":"t-h-marine-ahjm-4-atlas-micro-jacker-smallest-hydraulic-jack-plate-for-small-outboards-up-to-115-hp-4-setback","title":"T-H Marine ATLAS Micro Jacker AHJM-4 Hydraulic Jack Plate for Small Outboards up to 115 HP \/ 425 lbs","description":"\u003cp\u003eThe T-H Marine ATLAS Micro Jacker (AHJM-4) is a self-contained hydraulic jack plate built for small outboards, engineered to be the smallest and lightest hydraulic jack plate in its class. It is rated for outboards up to 425 pounds dry weight and 115 horsepower, making it a fit for shallow-water rigs such as Gheenoes, river runners, jon boats, and skiffs where getting up and out of trouble fast matters. The unit uses self-contained hydraulics, so there is no external reservoir or hydraulic lines to run, and it lifts an outboard from bottom to top in just 8 seconds.\u003c\/p\u003e\u003cp\u003eThe Micro Jacker has a compact 4 inch setback and a small footprint of 14-5\/8 inches wide by 11-1\/2 inches high, keeping the transom profile tight on smaller boats. With the unit installed, boaters get roughly 8.5 inches of total working height: 1.5 inches of adjustment at the transom, 1 inch on the motor side, 1 inch of adjustment with the motor, and a full 5 inches of hydraulic lift from the jack plate itself. It is constructed from aluminum with a silver finish for durability in a marine environment. For outboards that mount with clamp-on brackets instead of the standard BIA bolt hole pattern, the optional AHJM-CMA Clamp-On Motor Adapter allows those engines to be fitted to the ATLAS Micro Jacker.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJM-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Outboard Weight:\u003c\/strong\u003e 425 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Outboard Horsepower:\u003c\/strong\u003e 115 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Time:\u003c\/strong\u003e 8 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 14-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 11-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 4 x 14.5 x 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 11.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 105 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e 8.5 inches total (1.5 inches at transom, 1 inch on motor side, 1 inch adjustment with motor, 5 inches hydraulic lift)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic System:\u003c\/strong\u003e Self-contained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572073201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e 90 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits small outboards up to 425 pounds dry weight and 115 horsepower. Not compatible with Honda's 115 HP outboard, which exceeds the 425 pound dry weight limit. Outboards with clamp-on motor brackets require the optional AHJM-CMA Clamp-On Motor Adapter, since they do not mount to the standard BIA engine hole pattern.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum outboard weight and horsepower for the AHJM-4?\u003c\/strong\u003e The T-H Marine ATLAS Micro Jacker AHJM-4 is rated for outboards up to 425 pounds dry weight and 115 horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AHJM-4 work with a Honda 115 HP outboard?\u003c\/strong\u003e No. Honda's 115 HP outboard exceeds the 425 pound dry weight limit of the ATLAS Micro Jacker AHJM-4, so it cannot be used with that specific engine even though it falls within the plate's 115 HP rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does the Micro Jacker provide?\u003c\/strong\u003e The AHJM-4 has a fixed 4 inch setback, which keeps its footprint small at 14-5\/8 inches wide by 11-1\/2 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the jack plate lift the outboard?\u003c\/strong\u003e 8 seconds is all it takes for the ATLAS Micro Jacker to lift an outboard from bottom to top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much height adjustment does the AHJM-4 offer?\u003c\/strong\u003e About 8.5 inches of total working height: 1.5 inches of adjustment at the transom, 1 inch on the motor side, 1 inch of adjustment with the motor, and 5 inches of hydraulic lift from the Micro Jacker itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJM-4 made of?\u003c\/strong\u003e The ATLAS Micro Jacker is built from aluminum with a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mount an outboard with clamp-on brackets to this jack plate?\u003c\/strong\u003e Yes. Outboards with clamp-on brackets do not fit the standard BIA engine hole pattern, so the optional AHJM-CMA Clamp-On Motor Adapter is used to mount them to the ATLAS Micro Jacker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Micro Jacker need an external hydraulic reservoir or lines?\u003c\/strong\u003e No. The AHJM-4 uses self-contained hydraulics, so there is no separate reservoir or hydraulic line installation required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the AHJM-4?\u003c\/strong\u003e The AHJM-4 ships as the ATLAS Micro Jacker unit itself; the AHJM-CMA Clamp-On Motor Adapter and the 7014G replacement wiring harness are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Micro Jacker best suited for?\u003c\/strong\u003e Shallow-water boats such as Gheenoes, river runners, jon boats, and skiffs are the primary use case for the compact ATLAS Micro Jacker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the AHJM-4?\u003c\/strong\u003e The T-H Marine ATLAS Micro Jacker AHJM-4 carries a 90 day manufacturer warranty.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991261065435,"sku":"T-H-AHJM-4-DP","price":1333.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/atlas-micro-4-setback-hydraulic-jack-plate-ahjm-4-dp-atlas-micro-jacker-small-outboard-hydraulic-jack-31852722421803.jpg?v=1784498457"},{"product_id":"t-h-marine-atlas-jack-plate-replacement-wiring-harness-ahjrelaykit-2-for-atlas-hydraulic-jack-plates","title":"T-H Marine ATLAS Jack Plate Replacement Wiring Harness, AHJRELAYKIT-2","description":"\u003cp\u003eThe T-H Marine AHJRELAYKIT-2 is a genuine replacement wiring harness engineered specifically for ATLAS hydraulic jack plates. As an OEM component, it is built to restore the exact electrical connection your jack plate relies on for smooth, precise height and trim control, without the fitment guesswork that comes with generic aftermarket wiring.\u003c\/p\u003e\u003cp\u003eWhether you are refreshing a worn harness or making a critical repair after damage or corrosion, this replacement part is designed to match the original ATLAS system's performance standards. It is constructed for strength and corrosion resistance so it can stand up to the harsh marine environment, and it is intended for straightforward, direct installation in place of the original harness.\u003c\/p\u003e\u003cp\u003eThis wiring harness is part of T-H Marine's lineup of genuine ATLAS Jack Plate Replacement Parts, which also includes actuators, switches, and related hardware, so you can source the exact components needed to maintain or upgrade your ATLAS hydraulic jack plate setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJRELAYKIT-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Replacement Wiring Harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e ATLAS Hydraulic Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plate Replacement Part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572083101\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically for ATLAS hydraulic jack plates.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJRELAYKIT-2?\u003c\/strong\u003e The AHJRELAYKIT-2 is a genuine T-H Marine replacement wiring harness designed specifically for ATLAS hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this wiring harness fit any jack plate?\u003c\/strong\u003e No, the AHJRELAYKIT-2 is designed specifically for ATLAS hydraulic jack plates and is not a universal-fit part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM part or an aftermarket copy?\u003c\/strong\u003e It is a genuine OEM component from T-H Marine, built for OEM fit and function on ATLAS hydraulic jack plates rather than a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJRELAYKIT-2 weigh?\u003c\/strong\u003e This replacement wiring harness weighs 1.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my jack plate's wiring harness?\u003c\/strong\u003e A worn, damaged, or corroded harness can cause unreliable height and trim control on an ATLAS hydraulic jack plate, and the AHJRELAYKIT-2 restores that connection as a direct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the AHJRELAYKIT-2 made to withstand?\u003c\/strong\u003e The AHJRELAYKIT-2 is built for corrosion resistance and durability so it can hold up in the harsh marine environment surrounding an ATLAS hydraulic jack plate installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation straightforward?\u003c\/strong\u003e Yes, the AHJRELAYKIT-2 is designed as a direct replacement component for easy installation in place of the original ATLAS jack plate wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other ATLAS jack plate parts are available alongside this harness?\u003c\/strong\u003e T-H Marine also offers other ATLAS Jack Plate Replacement Parts, including a rocker switch and a replacement actuator, so you can source the exact components needed for your ATLAS hydraulic jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJRELAYKIT-2 come with installation instructions?\u003c\/strong\u003e The AHJRELAYKIT-2 is provided as an OEM replacement wiring harness intended for direct installation in place of the original harness on ATLAS hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the product number AHJRELAYKIT-2 refer to?\u003c\/strong\u003e AHJRELAYKIT-2 is the manufacturer part number for T-H Marine's Replacement Wiring Harness for ATLAS hydraulic jack plates.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991261851867,"sku":"T-H-AHJRELAYKIT","price":187.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/replacement-relay-harness-for-hydraulic-jack-plates-2014-ahjrelaykit-2-dp-atlas-jack-plate-replacement-parts-28008702935083_fa2ace68-b64b-4049-9797-43706ddf52a3.jpg?v=1784498471"},{"product_id":"t-h-marine-hi-jacker-fixed-jack-plate-4-inch-setback-fits-outboards-up-to-300-hp-jp-4fahd","title":"T-H Marine Hi-Jacker JP-4FAHD Heavy Duty Fixed Jack Plate, 4 Inch Setback, Fits Outboards up to 300 HP","description":"\u003cp\u003eThe T-H Marine Hi-Jacker JP-4FAHD is a heavy duty fixed jack plate built to solve a short transom on boats rigged with a long shaft outboard. It is also a solid fixed jack plate choice for V6 outboards. This version is rated to handle outboards up to 300 hp, making it the heavy duty counterpart to T-H Marine's standard 150 hp fixed jack plate in the same 4 inch family.\u003c\/p\u003e\u003cp\u003eThe bracket is machined from a solid 3\/8 inch thick aluminum extrusion for strength and long service life in a marine environment. The mounting pattern includes three engine mounting holes on top plus a bottom slot, along with two transom mounting holes, giving installers flexibility when lining up the plate to the boat and motor. The design incorporates a 3 inch designed lift combined with a full 4 inches of setback, for a total available vertical lift of 5-1\/2 inches once installed.\u003c\/p\u003e\u003cp\u003eThis is an affordable way to correct a transom-to-shaft-length mismatch without replacing the outboard or the boat's transom, and it is a straightforward bolt-on upgrade for boaters running larger V6 outboards who want additional setback and lift.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JP-4FAHD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Thickness:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower Rating:\u003c\/strong\u003e 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Mounting Holes:\u003c\/strong\u003e 3 top holes plus 1 bottom slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Mounting Holes:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned Lift:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Vertical Lift:\u003c\/strong\u003e 5-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 16 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572081008\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits outboards up to 300 hp, including V6 outboard applications, and is intended for mounting a long shaft outboard to a short transom.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hp rating does the T-H Marine JP-4FAHD jack plate handle?\u003c\/strong\u003e The JP-4FAHD Hi-Jacker fixed jack plate is rated to handle outboards up to 300 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback and lift does this jack plate provide?\u003c\/strong\u003e The JP-4FAHD provides a full 4 inches of setback along with a 3 inch designed lift, giving a total available vertical lift of 5-1\/2 inches once mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the JP-4FAHD jack plate made of?\u003c\/strong\u003e It is made from a solid 3\/8 inch thick aluminum extrusion, built to handle the loads of larger outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does the JP-4FAHD have?\u003c\/strong\u003e The bracket has three engine mounting holes plus a slot on the bottom, along with two transom mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem does this jack plate solve?\u003c\/strong\u003e The T-H Marine Hi-Jacker JP-4FAHD is designed as an inexpensive fix for mounting a long shaft outboard to a boat with a short transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JP-4FAHD suitable for V6 outboards?\u003c\/strong\u003e Yes, the JP-4FAHD is a solid fixed jack plate option for V6 outboards in addition to its use as a short-transom fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JP-4FAHD weigh?\u003c\/strong\u003e The JP-4FAHD fixed jack plate weighs 15.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this jack plate?\u003c\/strong\u003e The JP-4FAHD measures approximately 5 x 16 x 5 inches, with a minimum mounted height of 5.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the T-H Marine JP-4FAHD?\u003c\/strong\u003e The JP-4FAHD has a silver aluminum finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a lower horsepower version of this jack plate?\u003c\/strong\u003e Yes, T-H Marine also offers a standard version of the same 4 inch Hi-Jacker fixed jack plate rated for outboards up to 150 hp; the JP-4FAHD is the heavy duty version rated up to 300 hp and is a distinct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the JP-4FAHD come pre-assembled?\u003c\/strong\u003e The JP-4FAHD is a solid one-piece aluminum bracket, individually packaged and ready to mount using its engine and transom mounting holes.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264276699,"sku":"T-H-JP-4FAHD-DP","price":321.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/max-150hp-jp-4fa-dp-hi-jacker-fixed-jack-plate-4-inch-33068251676715.jpg?v=1784498623"},{"product_id":"t-h-marine-pro-hi-jacker-manual-jack-plate-6-setback-3-8-one-piece-aluminum-fits-outboards-to-175-hp-jp-6pw","title":"T-H Marine Pro Hi-Jacker JP-6PW Manual Jack Plate, 6 Inch Setback, Aluminum, Up to 175 HP Outboards","description":"\u003cp\u003eThe T-H Marine Pro Hi-Jacker (JP-6PW) is a manual aluminum jack plate built to mount an outboard engine further back and higher on the transom, improving hole shot, top speed, and shallow-water running clearance. It is machined from high strength aluminum that is 3\/8 inch thick and uses a one-piece design for a rigid, no-flex mounting platform between the transom and the outboard.\u003c\/p\u003e\u003cp\u003eHeight adjustment is handled through top adjust locking bars, so the entire plate can be raised or lowered with a single wrench rather than requiring access from underneath or multiple tools. The Pro Hi-Jacker provides 4 inches of vertical adjustment and 6 inches of setback, giving installers a useful range to dial in engine height and distance from the transom for the specific boat and outboard combination. It is rated for outboards up to 175 HP, making it suited to mid-size outboard-powered aluminum and fiberglass boats rather than heavy offshore rigs.\u003c\/p\u003e\u003cp\u003eBecause the plate is a bolt-on mechanical assembly rather than a hydraulic or electric unit, there are no pumps, motors, or wiring to install or maintain - adjustment is manual, by wrench, at the locking bars. A matching Center Adjustment Bolt and Collar is offered separately by T-H Marine for the adjustment mechanism across their Hi-Jacker line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JP-6PW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pro Hi-Jacker Manual Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e Up to 175 HP outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 19 x 17 x 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Top adjust locking bars, single-wrench adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572002034\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOutboard engines up to 175 HP\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the T-H Marine JP-6PW Pro Hi-Jacker jack plate?\u003c\/strong\u003e The JP-6PW Pro Hi-Jacker is rated for outboards up to 175 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does the JP-6PW jack plate provide?\u003c\/strong\u003e It provides 6 inches of setback, moving the outboard further back from the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical height adjustment does the Pro Hi-Jacker JP-6PW allow?\u003c\/strong\u003e 4 inches of vertical adjustment is built into the JP-6PW, letting the outboard be raised or lowered within that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JP-6PW jack plate made from?\u003c\/strong\u003e It is made from high strength aluminum that is 3\/8 inch thick, using a one-piece design for rigidity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JP-6PW jack plate manual or hydraulic?\u003c\/strong\u003e The JP-6PW Pro Hi-Jacker is a manual jack plate, adjusted by hand with a single wrench at the top adjust locking bars rather than a hydraulic pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need more than one tool to adjust the Pro Hi-Jacker jack plate?\u003c\/strong\u003e No, the top adjust locking bars on the JP-6PW are designed so height adjustment can be made with a single wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JP-6PW jack plate weigh?\u003c\/strong\u003e The JP-6PW weighs 28.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the Pro Hi-Jacker JP-6PW?\u003c\/strong\u003e The JP-6PW measures 19 x 17 x 6.5 inches overall, with a minimum mounted height of 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the load capacity of the JP-6PW jack plate?\u003c\/strong\u003e The JP-6PW is rated for a load capacity of 500 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting bolts included with the JP-6PW jack plate?\u003c\/strong\u003e The listing for the JP-6PW does not specify included mounting hardware, so buyers should confirm bolt requirements for their transom before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a matching adjustment bolt available for the JP-6PW?\u003c\/strong\u003e Yes, T-H Marine offers a Center Adjustment Bolt and Collar as a separate part that fits across their Hi-Jacker jack plate models, including the JP-6PW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the JP-6PW jack plate suited for?\u003c\/strong\u003e With a 175 HP maximum rating and 6 inch setback, the JP-6PW is suited to mid-size outboard-powered boats rather than larger offshore rigs.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264375003,"sku":"T-H-JP-6PW-DP","price":495.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6-set-back-manual-single-adjust-jack-plate-3-8-thick-6061-aircraft-grade-aluminum-polished-aluminum-finish-pro-hi-jacker-jack-plate-28266478567467.jpg?v=1784498634"},{"product_id":"t-h-marine-jpz-6-z-lock-manual-jack-plate-6-setback-for-v6-v8-outboards-up-to-300-hp","title":"T-H Marine Z-Lock JPZ-6 Manual Jack Plate, 6 Inch Setback for V6\/V8 Outboards up to 300 HP","description":"\u003cp\u003eThe T-H Marine Z-Lock Manual Jack Plate JPZ-6 is a 6 inch setback jack plate built to move your outboard aft and adjust its height for improved performance, hole shot, and top speed. It handles all V6 and V8 outboards up to 300 hp, making it suited to a wide range of bass boats and other outboard-powered rigs. The Z-Lock design upgrades T-H Marine's HI-JACKER jack plate series with matching slotted extrusions that lock the side plates in place, eliminating the side slippage that can develop over time on ordinary jack plate designs. This keeps the plate rigid and aligned under load instead of working loose.\u003c\/p\u003e\u003cp\u003eConstruction is strong aircraft grade aluminum, a full 1\/2 inch thick for strength, so the plate stands up to the stress of high-horsepower outboards and repeated trim cycles. The plate provides 5 inches of vertical adjustment and is easy to adjust from the top of the jack, so height changes can be made without dropping the plate off the boat. Because the JPZ-6 is a manual jack plate, setback and height are set by hand rather than by hydraulic actuator, which keeps the design simple with fewer parts to maintain. T-H Marine recommends contacting your boat manufacturer or local dealer for the correct setback recommendation for your specific boat, and to understand how adding a jack plate can affect your boat's handling. The Z-Lock series is also available in 4, 8, 10, and 12 inch setbacks if a different setback is needed, and is compatible with T-H Marine's Hot Shot hole shot plate for additional hole shot improvement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZ-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aircraft grade aluminum, 1\/2 inch thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e V6 and V8 outboards up to 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 850 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 33 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7 x 16 x 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Z-Lock matching slotted extrusions lock side plates in place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eV6 and V8 outboards up to 300 hp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on the T-H Marine JPZ-6 jack plate?\u003c\/strong\u003e The JPZ-6 is a 6 inch setback jack plate. T-H Marine's Z-Lock manual jack plate line also offers 4, 8, 10, and 12 inch setback options if a different distance is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards is the JPZ-6 rated for?\u003c\/strong\u003e It handles all V6 and V8 outboards up to 300 hp. Contact your boat manufacturer or local dealer for the correct setback recommendation for your specific boat before installing the JPZ-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical adjustment does the Z-Lock jack plate provide?\u003c\/strong\u003e The JPZ-6 provides 5 inches of vertical adjustment, and it is designed to be easy to adjust from the top of the jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JPZ-6 jack plate made from?\u003c\/strong\u003e It is made of strong aircraft grade aluminum, a full 1\/2 inch thick, giving the plate strength to handle high-horsepower outboard loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Z-Lock design actually do differently?\u003c\/strong\u003e Z-Lock adds matching slotted extrusions that lock the side plates in place, which eliminates the side slippage that can occur on jack plates without this feature. This is the design upgrade added to T-H Marine's HI-JACKER jack plate series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JPZ-6 a manual or hydraulic jack plate?\u003c\/strong\u003e The JPZ-6 is a manual jack plate, adjusted by hand rather than by a hydraulic actuator, which keeps its design simple with fewer components to maintain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the JPZ-6?\u003c\/strong\u003e The JPZ-6 Z-Lock Manual Jack Plate weighs 33 pounds and has product dimensions of 7 x 16 x 18 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity does the JPZ-6 support?\u003c\/strong\u003e The JPZ-6 has a rated load capacity of 850 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add a hole shot plate to the JPZ-6?\u003c\/strong\u003e Yes, T-H Marine's JPZHSP-6 Hot Shot Hole Shot Plate is designed to fit the JPZ-6 Z-Lock jack plate and attaches to the bottom of the jack plate to improve hole shot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the JPZ-6 jack plate come in?\u003c\/strong\u003e The JPZ-6 Z-Lock Manual Jack Plate is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to know my boat's recommended setback before ordering?\u003c\/strong\u003e Yes, T-H Marine advises contacting your boat manufacturer or local dealer for a setback recommendation specific to your boat, since adding a jack plate like the JPZ-6 can affect boat handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZ-6 different from a standard non-locking jack plate?\u003c\/strong\u003e Unlike jack plates without a locking mechanism, the JPZ-6's Z-Lock design uses matching slotted extrusions to lock the side plates in place, preventing the side slippage that can develop on standard designs over time.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264473307,"sku":"T-H-JPZ-6-DP","price":580.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/z-lock-manual-jack-plate-33062322569259.jpg?v=1784498645"},{"product_id":"t-h-marine-z-lock-manual-jack-plate-10-setback-jpz-10-fits-v6-and-v8-outboards-up-to-300-hp","title":"T-H Marine Z-Lock JPZ-10 Manual Jack Plate, 10 Inch Setback for V6\/V8 Outboards up to 300 HP","description":"\u003cp\u003eThe T-H Marine Z-Lock JPZ-10 is a manual jack plate built with a 10 inch setback for boaters running V6 and V8 outboards up to 300 hp. It is part of T-H Marine's HI-JACKER Z-Lock series, which upgrades the original jack plate design with matching slotted extrusions that lock the side plates in place. This eliminates side-to-side slippage and movement that can occur with older jack plate designs, keeping the outboard mounted securely as the plate is raised and lowered.\u003c\/p\u003e\u003cp\u003eThe JPZ-10 is machined from full 1\/2 inch aircraft grade aluminum for strength and long-term durability in a marine environment. Height is adjusted with a center bolt from the top of the jack, and the plate provides 5 inches of vertical adjustment, letting the operator dial in engine height for the boat's hull and running conditions. Because setback and mounting affect boat handling, T-H Marine recommends contacting the boat manufacturer or a local dealer for a setback recommendation before installation.\u003c\/p\u003e\u003cp\u003eThis 10 inch setback model is one of five Z-Lock setback options (4, 6, 8, 10, and 12 inch), so buyers should confirm the 10 inch setback is correct for their boat before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZ-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aircraft grade aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Thickness:\u003c\/strong\u003e Full 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e V6 and V8 outboards up to 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 48.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Method:\u003c\/strong\u003e Center bolt, adjusted from top of jack plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070804\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eV6 and V8 outboards up to 300 hp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does the T-H Marine JPZ-10 provide?\u003c\/strong\u003e The JPZ-10 has a 10 inch setback, one of five Z-Lock setback options T-H Marine offers (4, 6, 8, 10, and 12 inch), so it is important to confirm 10 inches is the correct setback for your boat before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the JPZ-10 jack plate rated for?\u003c\/strong\u003e It is built to handle all V6 and V8 outboards up to 300 hp, with a rated load capacity of 300 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical adjustment does the Z-Lock JPZ-10 offer?\u003c\/strong\u003e The JPZ-10 provides 5 inches of vertical adjustment, adjusted with a center bolt from the top of the jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Z-Lock design and how is it different from a standard jack plate?\u003c\/strong\u003e Z-Lock is T-H Marine's design upgrade to its HI-JACKER jack plate series that uses matching slotted extrusions to lock the side plates in place, which eliminates the side-to-side slippage that can occur with older jack plate designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JPZ-10 made from?\u003c\/strong\u003e The JPZ-10 is machined from full 1\/2 inch aircraft grade aluminum, chosen for strength and durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JPZ-10 jack plate weigh?\u003c\/strong\u003e The T-H Marine JPZ-10 weighs 48.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a specific setback for my boat, or can I just pick any size?\u003c\/strong\u003e T-H Marine recommends contacting your boat manufacturer or a local dealer for a setback recommendation, since setback and the addition of a jack plate can affect how the boat handles; the JPZ-10 is the 10 inch setback option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the JPZ-10 come with mounting hardware?\u003c\/strong\u003e The dossier for the JPZ-10 does not list included mounting hardware, so buyers should confirm hardware requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JPZ-10 a manual or hydraulic jack plate?\u003c\/strong\u003e The JPZ-10 is a manual Z-Lock jack plate, adjusted by hand with a center bolt rather than a hydraulic pump system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other setback sizes are available in this Z-Lock series?\u003c\/strong\u003e Besides the 10 inch JPZ-10, T-H Marine's Z-Lock manual jack plate series is also available in 4, 6, 8, and 12 inch setback versions, each a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the JPZ-10 be used with a hole shot plate accessory?\u003c\/strong\u003e T-H Marine makes a Hot Shot hole shot plate designed to fit the 10 inch setback Z-Lock jack plate as a separate accessory that attaches to the bottom of the plate.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264506075,"sku":"T-H-JPZ-10-DP","price":785.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/z-lock-manual-jack-plate-33062322569259_cc5eb381-a759-47d7-9784-a96827b733bf.jpg?v=1784498647"},{"product_id":"t-h-marine-hi-jacker-fixed-jack-plate-4-inch-short-transom-fix-for-outboards-up-to-150-hp-jp-4fa","title":"T-H Marine JP-4FA Hi-Jacker Fixed Jack Plate, 4 Inch Setback, Up to 150 HP Outboards","description":"\u003cp\u003eThe T-H Marine Hi-Jacker JP-4FA Fixed Jack Plate is a solid aluminum extrusion bracket built to solve one of the most common rigging problems on the water: mounting a long shaft outboard to a short transom. Machined from 3\/8 inch thick aluminum, this fixed jack plate is engineered as an inexpensive, permanent solution rather than a hydraulic or adjustable setup, and it also works well as a fixed jack plate on all V6 outboards. It is rated to handle any outboard up to 150 hp.\u003c\/p\u003e\u003cp\u003eThe plate features three engine mounting holes on top plus a mounting slot on the bottom, combined with two transom mounting holes, giving installers flexibility when aligning the outboard to the transom. Its 3 inch designed lift, combined with the plate's own thickness, produces a total vertical lift of 5 1\/2 inches along with a full 4 inches of setback, moving the propeller further from the transom to help improve water flow to the prop and reduce transom-induced turbulence at speed.\u003c\/p\u003e\u003cp\u003eBecause it is a fixed (non-hydraulic) design, the JP-4FA has no moving parts to maintain, seal, or fail, making it a durable, low-cost alternative to adjustable jack plates for boats that do not need on-the-water height adjustment. It ships as a single unit ready for transom mounting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JP-4FA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum (3\/8 inch thick aluminum extrusion)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Vertical Lift:\u003c\/strong\u003e 5 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned Lift:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Mounting Holes:\u003c\/strong\u003e 3, on top, plus a mounting slot on the bottom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Mounting Holes:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower:\u003c\/strong\u003e 150 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 16 x 10 x 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572002065\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits outboards up to 150 hp requiring a short-transom-to-long-shaft solution\u003c\/li\u003e\n\u003cli\u003eAlso suitable as a fixed jack plate for all V6 outboards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the JP-4FA jack plate?\u003c\/strong\u003e The T-H Marine JP-4FA Hi-Jacker Fixed Jack Plate is rated to handle any outboard up to 150 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback and lift does this jack plate provide?\u003c\/strong\u003e The JP-4FA gives a full 4 inches of setback and, with its 3 inch designed lift, a total vertical lift of 5 1\/2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the JP-4FA made of?\u003c\/strong\u003e It is made from a solid, 3\/8 inch thick aluminum extrusion, built as a tough, one-piece bracket rather than a welded or multi-part assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate adjust while the boat is running?\u003c\/strong\u003e No. The JP-4FA is a fixed jack plate, meaning its lift and setback are set at installation and do not adjust hydraulically or manually once mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a jack plate like the JP-4FA?\u003c\/strong\u003e This jack plate provides an inexpensive way to mount a long shaft outboard onto a short transom, and it also works as a fixed jack plate for all V6 outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting holes does the JP-4FA have?\u003c\/strong\u003e The JP-4FA has three engine mounting holes on top plus a mounting slot on the bottom, along with two transom mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JP-4FA weigh?\u003c\/strong\u003e The T-H Marine JP-4FA weighs 11.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the JP-4FA jack plate?\u003c\/strong\u003e The JP-4FA measures 16 x 10 x 5.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version for higher horsepower outboards?\u003c\/strong\u003e Yes, T-H Marine offers the JP-4FAHD as a separate part for outboards up to 300 hp; the JP-4FA covers outboards up to 150 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the JP-4FA fit any outboard brand?\u003c\/strong\u003e The JP-4FA is designed to handle any outboard up to 150 hp and works as a fixed jack plate for all V6 outboards, without being limited to one outboard brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JP-4FA sold as a complete, ready-to-install unit?\u003c\/strong\u003e Yes, the JP-4FA ships as a complete aluminum jack plate bracket ready for transom and engine mounting.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264538843,"sku":"T-H-JP-4FA-DP","price":218.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/max-150hp-jp-4fa-dp-hi-jacker-fixed-jack-plate-4-inch-33068251676715_f559f5d6-e9d5-4d39-a122-4b4eb331d027.jpg?v=1784498649"},{"product_id":"t-h-marine-jpz-4-z-lock-manual-jack-plate-4-setback-fits-v6-v8-outboards-up-to-300-hp","title":"T-H Marine JPZ-4 Z-Lock Manual Jack Plate, 4 Inch Setback, Aluminum, Fits V6 and V8 Outboards up to 300 HP","description":"\u003cp\u003eThe T-H Marine JPZ-4 Z-Lock Manual Jack Plate is a 4 inch setback jack plate built from full 1\/2 inch aircraft grade aluminum for strength and stability at the transom. It is part of T-H Marine's HI-JACKER Z-Lock series, which uses a Z-Lock design with matching slotted extrusions that lock the side plates in place, eliminating the side slippage and lateral movement common with conventional jack plate designs. This rigidity keeps the outboard positioned correctly under load, particularly at higher speeds and during hard turns.\u003c\/p\u003e\u003cp\u003eThe JPZ-4 is rated to handle all V6 and V8 outboards up to 300 hp, making it suited to a wide range of performance and bay boat applications. Height is adjusted from the top of the jack plate with a single center bolt adjustment point, and the unit provides 5 inches of vertical adjustment to fine-tune engine height for the boat and running conditions. As a manual (non-hydraulic) plate, it has no pump, reservoir, or lines to install or maintain.\u003c\/p\u003e\u003cp\u003eSetback determines how far the engine is moved aft of the transom, and the JPZ-4's 4 inch setback is the shortest option in the Z-Lock lineup, which is also offered in 6, 8, 10, and 12 inch setbacks. Because setback affects handling and the manufacturer notes that adding a jack plate can affect boat performance, checking with the boat manufacturer or a local dealer for a setback recommendation before installing is advised. Mounting bolts and hardware needed for installation should be confirmed at time of purchase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZ-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Z-Lock Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aircraft grade aluminum, full 1\/2 inch thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e V6 and V8 outboards up to 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Method:\u003c\/strong\u003e Single center bolt adjustment point, adjusted from top of jack plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign Feature:\u003c\/strong\u003e Z-Lock matching slotted extrusions lock side plates in place to eliminate side slippage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 to 500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 16 x 6.75 x 13.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eV6 and V8 outboards up to 300 hp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does the T-H Marine JPZ-4 provide?\u003c\/strong\u003e The JPZ-4 provides a 4 inch setback, the shortest option in T-H Marine's Z-Lock jack plate series, which also comes in 6, 8, 10, and 12 inch setback versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards is the JPZ-4 Z-Lock Jack Plate compatible with?\u003c\/strong\u003e It handles all V6 and V8 outboards up to 300 hp, making the JPZ-4 suited to a wide range of performance outboard setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical adjustment does this jack plate allow?\u003c\/strong\u003e The JPZ-4 offers 5 inches of vertical adjustment, letting you tune engine height for different running conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JPZ-4 jack plate made from?\u003c\/strong\u003e It is constructed from aircraft grade aluminum, using full 1\/2 inch material for strength and rigidity at the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JPZ-4 a manual or hydraulic jack plate?\u003c\/strong\u003e The JPZ-4 is a manual jack plate, adjusted with a single center bolt adjustment point from the top of the unit rather than a hydraulic pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Z-Lock design differ from a standard jack plate?\u003c\/strong\u003e The Z-Lock design used on the JPZ-4 features matching slotted extrusions that lock the side plates in place, which eliminates the side slippage and lateral movement found in conventional jack plate designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the JPZ-4?\u003c\/strong\u003e The JPZ-4 measures 16 x 6.75 x 13.88 inches and weighs 26.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity does the JPZ-4 support?\u003c\/strong\u003e The JPZ-4 Z-Lock Jack Plate has a rated load capacity of 300 to 500 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the JPZ-4 come with mounting bolts?\u003c\/strong\u003e No, mounting bolts are not included with the JPZ-4 and must be sourced separately for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I check with my boat manufacturer before installing the JPZ-4?\u003c\/strong\u003e Yes, T-H Marine recommends contacting your boat manufacturer or local dealer for a setback recommendation, since adding a jack plate like the JPZ-4 can affect boat performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color finish does the JPZ-4 have?\u003c\/strong\u003e The JPZ-4 has a silver finish, consistent with its aluminum construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZ-4 different from the longer setback Z-Lock plates?\u003c\/strong\u003e The JPZ-4 uses the same aluminum Z-Lock construction and 5 inch vertical adjustment as the rest of the series, but with a shorter 4 inch setback compared to the 6, 8, 10, and 12 inch versions.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264571611,"sku":"T-H-JPZ-4-DP","price":547.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/z-lock-manual-jack-plate-33062322569259_6bdf5cf9-e9a6-48ee-a835-acb1934908ae.jpg?v=1784498652"},{"product_id":"t-h-marine-jpzhsp-10-hot-shot-hole-shot-plate-10-in-for-z-lock-manual-jack-plates","title":"T-H Marine JPZHSP-10 Hot Shot Hole Shot Plate for Z-Lock Manual Jack Plates, 10 Inch","description":"\u003cp\u003eThe T-H Marine JPZHSP-10 Hot Shot Hole Shot Plate is a bolt-on performance accessory that attaches to the bottom of a Z-Lock manual jack plate to improve hole shot and overall handling. By reducing water drag at take-off, the Hot Shot plate delivers an 18 to 20 percent better hole shot, which translates to a boat coming out of the hole 2 to 3 seconds faster. In addition to improving acceleration, the plate acts as a center trim tab, helping the boat stay on plane and virtually eliminating porpoising at lower speeds.\u003c\/p\u003e\u003cp\u003eThe JPZHSP-10 is the 10 inch model in T-H Marine's Hot Shot lineup, sized to match jack plates in the same family as the JPZHSP-6 and JPZHSP-8 plates. It is molded from durable plastic and ships individually boxed as a single unit, ready to mount directly to a compatible Z-Lock manual jack plate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZHSP-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hot Shot Hole Shot Plate, 10 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 18 x 9 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Z-Lock manual jack plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Individually boxed, sold as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for Z-Lock manual jack plates\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the JPZHSP-10 Hot Shot Hole Shot Plate do?\u003c\/strong\u003e It attaches to the bottom of a Z-Lock manual jack plate to reduce water drag at take-off, giving an 18 to 20 percent better hole shot, which is about 2 to 3 seconds faster out of the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hot Shot plate help with porpoising?\u003c\/strong\u003e Yes, the JPZHSP-10 also functions as a center trim tab, which helps the boat stay on plane and virtually eliminates porpoising at lower speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat jack plates is the JPZHSP-10 compatible with?\u003c\/strong\u003e The JPZHSP-10 is designed to fit T-H Marine's Z-Lock manual jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JPZHSP-10 weigh?\u003c\/strong\u003e The JPZHSP-10 Hot Shot Hole Shot Plate weighs 2.48 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the JPZHSP-10?\u003c\/strong\u003e The JPZHSP-10 measures 18 x 9 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Hot Shot Hole Shot Plate made from?\u003c\/strong\u003e The JPZHSP-10 is made from plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 10 inch model the largest Hot Shot plate available?\u003c\/strong\u003e T-H Marine offers the Hot Shot Hole Shot Plate in multiple sizes, including the JPZHSP-6, JPZHSP-8, and the JPZHSP-10 covered here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZHSP-10 packaged?\u003c\/strong\u003e The JPZHSP-10 ships individually boxed as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Hot Shot plate work with a hydraulic jack plate?\u003c\/strong\u003e The JPZHSP-10 is built for Z-Lock manual jack plates; no hydraulic jack plate compatibility is listed for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much faster is hole shot with the JPZHSP-10 installed?\u003c\/strong\u003e Boats equipped with the JPZHSP-10 come out of the hole 2 to 3 seconds faster, reflecting the 18 to 20 percent improvement in hole shot performance.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264768219,"sku":"T-H-JPZHSP-10","price":84.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6-hole-shot-plate-z-lock-hole-shot-plate-28009429696555.jpg?v=1784498665"},{"product_id":"t-h-marine-z-lock-manual-jack-plate-8-setback-fits-all-v6-v8-outboards-up-to-300-hp-mpn-jpz-8","title":"T-H Marine Z-Lock Manual Jack Plate JPZ-8, 8 Inch Setback for V6 and V8 Outboards up to 300 HP","description":"\u003cp\u003eThe T-H Marine JPZ-8 is a Z-Lock manual jack plate built with an 8 inch setback for outboard-powered boats. It is machined from full 1\/2 inch thick aircraft grade aluminum and uses the Z-Lock design, in which matching slotted extrusions on the plate lock the side plates in place to eliminate side slippage and unwanted movement between the transom and motor mounting sections. This gives the plate strength and stability that a standard sliding jack plate design does not provide.\u003c\/p\u003e\u003cp\u003eHeight is adjusted manually from the top of the jack plate using a center bolt, with 5 inches of vertical adjustment available so the outboard can be positioned to optimize performance, fuel economy, and handling in shallow water. The JPZ-8 is rated to handle all V6 and V8 outboards up to 300 hp, making it suitable for a wide range of mid-size to larger outboard-powered boats. It is also compatible with T-H Marine's Z-Lock Hot Shot hole shot plate accessory, which attaches to the bottom of the jack plate for improved hole shot performance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZ-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aircraft grade aluminum, full 1\/2 inch thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Method:\u003c\/strong\u003e Manual, adjusted from top of jack plate with center bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e All V6 and V8 outboards up to 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 41.47 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572070750\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits all V6 and V8 outboards up to 300 hp.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does the JPZ-8 jack plate provide?\u003c\/strong\u003e The T-H Marine JPZ-8 Z-Lock jack plate provides an 8 inch setback, positioning the outboard further behind the transom to improve performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards is the JPZ-8 rated for?\u003c\/strong\u003e This jack plate handles all V6 and V8 outboards up to 300 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JPZ-8 a manual or hydraulic jack plate?\u003c\/strong\u003e It is a manual jack plate, adjusted from the top using a center bolt rather than a hydraulic pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JPZ-8 jack plate made from?\u003c\/strong\u003e The JPZ-8 is made from full 1\/2 inch thick aircraft grade aluminum for strength and stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical adjustment does the Z-Lock jack plate offer?\u003c\/strong\u003e The JPZ-8 offers 5 inches of vertical adjustment for setting the outboard mounting height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the Z-Lock design different from a standard jack plate?\u003c\/strong\u003e Matching slotted extrusions in the Z-Lock design lock the side plates in place, which eliminates side slippage and movement that can occur with standard sliding jack plate designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JPZ-8 jack plate weigh?\u003c\/strong\u003e The T-H Marine JPZ-8 weighs 41.47 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting bolts included with the JPZ-8?\u003c\/strong\u003e The dossier for the JPZ-8 Z-Lock jack plate does not specify included mounting hardware; check with T-H Marine or your dealer before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add a hole shot plate to the JPZ-8?\u003c\/strong\u003e Yes, T-H Marine's Z-Lock Hot Shot hole shot plate (model JPZHSP-8) is designed to attach to the bottom of the JPZ-8 style jack plate to improve hole shot performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other setback sizes are available in the Z-Lock series?\u003c\/strong\u003e The Z-Lock jack plate series is also available in 4 inch, 6 inch, 10 inch, and 12 inch setback sizes, in addition to the 8 inch JPZ-8.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I get a setback recommendation before buying the JPZ-8?\u003c\/strong\u003e Yes, T-H Marine recommends contacting your boat manufacturer or local dealer for a setback recommendation for your particular boat, since adding a jack plate can affect handling.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264800987,"sku":"T-H-JPZ-8-DP","price":693.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/z-lock-manual-jack-plate-33062322569259_f3eec248-7a0b-49de-a715-d0124fabfa8e.jpg?v=1784498665"},{"product_id":"t-h-marine-8-z-lock-hot-shot-hole-shot-plate-fits-jpz-8-manual-jack-plates-jpzhsp-8","title":"T-H Marine JPZHSP-8 8 Inch Hot Shot Hole Shot Plate for Z-Lock JPZ-8 Jack Plates","description":"\u003cp\u003eThe T-H Marine JPZHSP-8 is an 8 inch Hot Shot Hole Shot Plate built for the Z-Lock series of manual jack plates. It bolts to the bottom of a Z-Lock manual jack plate (fits the JPZ-8 model) to change how the boat comes out of the hole. By dramatically reducing water drag at takeoff, the plate delivers an 18 to 20 percent improvement in hole shot, translating to roughly 2 to 3 seconds faster time out of the hole compared to running without it. It also functions as a center trim tab, helping the boat settle onto plane and stay there at lower speeds while virtually eliminating porpoising.\u003c\/p\u003e\u003cp\u003eThe JPZHSP-8 is finished in gunmetal gray and ships individually boxed for straightforward replacement or first-time installation on a Z-Lock manual jack plate. It is part of a sized lineup so owners of different Z-Lock jack plate models can match the correct plate to their setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZHSP-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Hot Shot Hole Shot Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Z-Lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Jack Plate Model:\u003c\/strong\u003e JPZ-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Shot Improvement:\u003c\/strong\u003e 18 to 20 percent better hole shot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime to Plane Improvement:\u003c\/strong\u003e 2 to 3 seconds faster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gunmetal Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572080759\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Individually boxed, open quantity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eZ-Lock manual jack plate, model JPZ-8\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat jack plate does the T-H Marine JPZHSP-8 fit?\u003c\/strong\u003e The JPZHSP-8 is designed for T-H Marine's Z-Lock manual jack plate, specifically the JPZ-8 model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JPZHSP-8 improve hole shot?\u003c\/strong\u003e It provides an 18 to 20 percent better hole shot, which works out to roughly 2 to 3 seconds faster out of the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the JPZHSP-8 hole shot plate?\u003c\/strong\u003e It is the 8 inch size in T-H Marine's Hot Shot hole shot plate lineup for Z-Lock jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the JPZHSP-8?\u003c\/strong\u003e The JPZHSP-8 Hot Shot Hole Shot Plate is finished in gunmetal gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this plate help with porpoising?\u003c\/strong\u003e Yes, the JPZHSP-8 reduces porpoising at lower speeds and helps the boat stay on plane.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Hot Shot Hole Shot Plate actually work?\u003c\/strong\u003e It attaches to the bottom of the Z-Lock jack plate and dramatically reduces water drag at takeoff while also acting as a center trim tab, improving hole shot and reducing bow rise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JPZHSP-8 weigh?\u003c\/strong\u003e The JPZHSP-8 hole shot plate weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZHSP-8 packaged?\u003c\/strong\u003e The JPZHSP-8 ships individually boxed as a single hole shot plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JPZHSP-8 available in other sizes for different jack plates?\u003c\/strong\u003e Yes, T-H Marine also makes the JPZHSP-6 for the JPZ-6 jack plate and the JPZHSP-10 for the JPZ-10 jack plate, so buyers should match the plate to their specific Z-Lock jack plate model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZHSP-8 installed?\u003c\/strong\u003e The JPZHSP-8 easily attaches to the bottom of a Z-Lock manual jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the JPZHSP-8 fit a hydraulic jack plate?\u003c\/strong\u003e The JPZHSP-8 is built specifically for Z-Lock manual jack plates, model JPZ-8.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine JPZHSP-8?\u003c\/strong\u003e The T-H Marine JPZHSP-8 Hot Shot Hole Shot Plate carries UPC 733572080759.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991265063131,"sku":"T-H-JPZHSP-8","price":79.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6-hole-shot-plate-z-lock-hole-shot-plate-28009429696555_38198059-6d93-4475-ba4d-9ff772287b1f.jpg?v=1784498689"},{"product_id":"t-h-marine-z-lock-hot-shot-hole-shot-plate-jpzhsp-6-fits-6-z-lock-manual-jack-plates-jpz-6","title":"T-H Marine Z-Lock Hole Shot Plate JPZHSP-6, 6 Inch Setback, Fits JPZ-6 Jack Plates","description":"\u003cp\u003eThe T-H Marine Z-Lock Hole Shot Plate (JPZHSP-6) is a bolt-on performance plate that attaches to the bottom of a compatible 6 inch setback Z-Lock jack plate to sharpen hole shot and takeoff handling. Marketed under T-H Marine's Hot Shot line, it works by dramatically reducing water drag as the boat comes onto plane, and by doubling as a center trim tab. Owners of Z-Lock manual jack plates use it to get the bow up and the hull planing faster, with the added benefit of reduced porpoising at lower cruising speeds and better plane-holding stability.\u003c\/p\u003e\u003cp\u003eInstallation is a straightforward bolt-on to the bottom of the jack plate, and the plate ships individually boxed. It is sized specifically for the 6 inch setback Z-Lock jack plate (JPZ-6); T-H Marine also offers matching Hot Shot hole shot plates in 8 inch and 10 inch setback sizes for the corresponding jack plate widths, so boat owners should confirm their jack plate's setback before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZHSP-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Z-Lock Hole Shot Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback Size:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Jack Plate:\u003c\/strong\u003e Z-Lock Jack Plate, 6 inch setback (JPZ-6)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572080704\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Individually boxed, open quantity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits T-H Marine's Z-Lock Manual Jack Plate with a 6 inch setback, part number JPZ-6.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the JPZHSP-6 Hole Shot Plate do?\u003c\/strong\u003e It bolts to the bottom of a Z-Lock jack plate to reduce water drag on takeoff and act as a center trim tab, which improves hole shot and helps the boat get on plane faster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich jack plate does the JPZHSP-6 fit?\u003c\/strong\u003e The JPZHSP-6 is sized for T-H Marine's Z-Lock Manual Jack Plate with a 6 inch setback, part number JPZ-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the JPZHSP-6 fit an 8 or 10 inch setback jack plate?\u003c\/strong\u003e No, the JPZHSP-6 is built for the 6 inch setback Z-Lock jack plate; T-H Marine offers the JPZHSP-8 for 8 inch setback plates and the JPZHSP-10 for 10 inch setback plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much faster is hole shot with this plate installed?\u003c\/strong\u003e T-H Marine states the Hot Shot Hole Shot Plate design delivers an 18 to 20 percent better hole shot, translating to about 2 to 3 seconds faster out of the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hole Shot Plate help with porpoising?\u003c\/strong\u003e Yes, the JPZHSP-6 reduces porpoising at lower speeds and helps the boat stay on plane by functioning as a center trim tab in addition to cutting water drag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the JPZHSP-6 weigh?\u003c\/strong\u003e The T-H Marine JPZHSP-6 Hole Shot Plate weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Hole Shot Plate installed?\u003c\/strong\u003e The JPZHSP-6 attaches to the bottom of a compatible Z-Lock jack plate as a bolt-on addition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZHSP-6 packaged?\u003c\/strong\u003e It ships individually boxed as an open-quantity item, part number JPZHSP-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JPZHSP-6 a genuine T-H Marine part?\u003c\/strong\u003e Yes, JPZHSP-6 is T-H Marine's own part number for the Z-Lock Hole Shot Plate, sized for the 6 inch setback Z-Lock jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine JPZHSP-6?\u003c\/strong\u003e The UPC for the JPZHSP-6 Z-Lock Hole Shot Plate is 733572080704.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991265226971,"sku":"T-H-JPZHSP-6","price":72.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6-hole-shot-plate-z-lock-hole-shot-plate-28009429696555_9d6ecafc-83f1-46fc-a308-c53117914859.jpg?v=1784498699"},{"product_id":"t-h-marine-cmc-top-transom-washer-plate-12-7-8-inch-hole-centers-6061-t6-aluminum","title":"T-H Marine CMC Top Transom Washer Plate, 12-7\/8 Inch Hole Centers, 6061-T6 Aluminum","description":"\u003cp\u003eThe T-H Marine CMC Top Transom Washer Plate is a load-distributing backing plate for transom-mounted tilt and trim units and jack plates. It is machined from strong 3\/8 inch 6061-T6 alloy aluminum, not cast aluminum, giving it the strength to handle the mounting loads of high performance engines without deforming. Bolting this plate against the inside of the transom spreads the clamping load of the mounting bolts across a wider area of fiberglass, so the bolt heads do not dig in, bite into, or crush the transom material over time. This is especially important on boats running powerful engines, where concentrated point loads from bolts alone can crack gelcoat or compress the transom core.\u003c\/p\u003e\u003cp\u003eThis is the top plate in a matched pair, with 12-7\/8 inch hole centers sized to line up with standard tilt and trim and jack plate mounting patterns. A companion CMC Bottom Transom Washer Plate is sold separately under a different part number with 9-7\/8 inch hole centers, so be sure to order the correct plate for the position you are reinforcing. The plate is a simple, purpose-built piece of hardware: no moving parts, no finish to wear off, just a solid aluminum backing plate designed to be installed once and left in place for the life of the transom mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 20022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/8 inch 6061-T6 alloy aluminum (not cast aluminum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Centers:\u003c\/strong\u003e 12-7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Top transom washer plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572020022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for transom mounting locations using a 12-7\/8 inch hole center pattern, matching standard CMC tilt and trim units and jack plates.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine CMC Top Transom Washer Plate used for?\u003c\/strong\u003e It is a backing plate, part number 20022, installed on the inside of a boat transom to spread the clamping load of tilt and trim or jack plate mounting bolts over a wider area so the bolts do not bite into or crush the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this plate made of?\u003c\/strong\u003e Part number 20022 is machined from 3\/8 inch 6061-T6 alloy aluminum, not cast aluminum, which gives it the strength to handle high performance engine mounting loads without deforming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hole centers on this washer plate?\u003c\/strong\u003e The hole centers measure 12-7\/8 inch, matching the mounting pattern of standard CMC tilt and trim units and jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the top or bottom transom washer plate?\u003c\/strong\u003e This is the top transom washer plate, part number 20022. A separate CMC Bottom Transom Washer Plate with 9-7\/8 inch hole centers is sold under a different part number, so make sure to order the plate that matches the position you are reinforcing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Top Transom Washer Plate weigh?\u003c\/strong\u003e Part number 20022 weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the plate cast or machined aluminum?\u003c\/strong\u003e It is not cast aluminum. The CMC Top Transom Washer Plate, part 20022, is made from strong 3\/8 inch 6061-T6 alloy aluminum for better strength and load distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a transom washer plate instead of just tightening the mounting bolts directly?\u003c\/strong\u003e Direct bolt tightening without a backing plate concentrates load at each bolt head, which can bite into the transom over time, especially with high performance engines; the CMC Top Transom Washer Plate spreads that load evenly across the transom surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this washer plate come with mounting hardware?\u003c\/strong\u003e Part number 20022 is the aluminum washer plate itself; it is used together with the mounting bolts of the tilt and trim unit or jack plate being installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit any jack plate or tilt and trim unit?\u003c\/strong\u003e The CMC Top Transom Washer Plate, part 20022, is sized to a 12-7\/8 inch hole center pattern, matching standard CMC tilt and trim and jack plate mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the T-H Marine CMC Top Transom Washer Plate genuine or aftermarket?\u003c\/strong\u003e Part number 20022 is a genuine T-H Marine CMC component, manufactured to the same 12-7\/8 inch hole center pattern used across CMC's tilt and trim and jack plate mounting hardware.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442737371,"sku":"T-H-20022","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-20022_lg__95106.1651754573.500.750.jpg?v=1785163481"},{"product_id":"t-h-marine-cmc-transom-clamp-adapter-13022-for-pt-130-tilt-and-trim-atlas-tht-130c","title":"T-H Marine CMC Transom Clamp Adapter 13022 for PT-130 Tilt and Trim, ATLAS THT-130C","description":"\u003cp\u003eThe T-H Marine CMC Transom Clamp Adapter, part number 13022, is an adapter kit built for quick and easy installation of transom clamp type outboard motors onto full-size tilt and trim units and jack plates. It is compatible with the CMC PT-130 Tilt \u0026amp; Trim and the ATLAS THT-130C Tilt \u0026amp; Trim, both of which are larger trim units sized for standard outboard engine mounting with the BIA hole pattern.\u003c\/p\u003e\u003cp\u003eIf your outboard has clamps that tighten inside of the splash well rather than a standard bolt-on mount, this adapter lets the motor fit onto tilt and trim units or jack plates designed for standard, full-size motor mounting. It is intended for motors that are too big for smaller tilt and trim units or jack plates but still need to be fitted to the larger, standard-pattern plates. The 13022 adapter is also the required transom clamp adapter for the CMC BA-130 Breakaway unit when the outboard's clamps use thumb screws.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Transom Clamp Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Units:\u003c\/strong\u003e CMC PT-130 Tilt \u0026amp; Trim, ATLAS THT-130C Tilt \u0026amp; Trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Mounting Type:\u003c\/strong\u003e Transom clamp motors (clamps tighten inside the splash well)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Pattern of Compatible Units:\u003c\/strong\u003e BIA hole pattern (standard outboard engine mounting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739697130225\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCMC PT-130 Tilt \u0026amp; Trim\u003c\/li\u003e\n\u003cli\u003eATLAS THT-130C Tilt \u0026amp; Trim\u003c\/li\u003e\n\u003cli\u003eJack plates designed for standard, full-size motor mounting\u003c\/li\u003e\n\u003cli\u003eRequired accessory for the CMC BA-130 Breakaway unit when motor clamps use thumb screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine CMC Transom Clamp Adapter, part number 13022?\u003c\/strong\u003e Part number 13022 is an adapter kit that lets transom clamp type outboard motors mount onto tilt and trim units or jack plates that are built for standard, full-size motor mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich tilt and trim units is the 13022 adapter compatible with?\u003c\/strong\u003e It works with the CMC PT-130 Tilt \u0026amp; Trim and the ATLAS THT-130C Tilt \u0026amp; Trim, both larger trim units sized for standard outboard engine mounting with the BIA hole pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 13022 adapter also work with jack plates?\u003c\/strong\u003e Yes, the T-H Marine CMC Transom Clamp Adapter is designed to let transom clamp motors fit jack plates built for standard, full-size motor mounting, in addition to the PT-130 and THT-130C tilt and trim units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need this adapter if my outboard motor has transom clamps?\u003c\/strong\u003e If your motor's clamps tighten inside of the splash well, you will need the 13022 Transom Clamp Adapter to fit it onto a PT-130, THT-130C, or a compatible standard-pattern jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the T-H Marine CMC Transom Clamp Adapter required for the CMC BA-130 Breakaway unit?\u003c\/strong\u003e For motors with clamps that use thumb screws, the T-H-13022 Transom Clamp Adapter is required in order to use them with the CMC BA-130 Breakaway unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hole pattern does the PT-130 Tilt and Trim use?\u003c\/strong\u003e The CMC PT-130 and ATLAS THT-130C are sized for standard outboard engine mounting with the BIA hole pattern, which the 13022 adapter is built to work with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for part number 13022?\u003c\/strong\u003e The UPC for the T-H Marine CMC Transom Clamp Adapter, part 13022, is 739697130225.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the T-H Marine CMC Transom Clamp Adapter weigh?\u003c\/strong\u003e The 13022 Transom Clamp Adapter weighs 12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an adapter instead of mounting my motor directly?\u003c\/strong\u003e Some outboard motors are too large for smaller tilt and trim units or jack plates but use transom clamps rather than a standard bolt pattern, so the 13022 adapter is needed to fit them to the larger, standard-pattern plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does part number 13022 fall under?\u003c\/strong\u003e The T-H Marine CMC Transom Clamp Adapter, 13022, is categorized as a jack plate accessory used for transom clamp motor installations.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442770139,"sku":"T-H-13022","price":127.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-13022_lg__63042.1651754559.500.750.jpg?v=1785163481"},{"product_id":"cmc-ba-130-breakaway-unit-for-outboard-motors-up-to-130-hp-part-13003","title":"CMC BA-130 Breakaway Unit for Outboard Motors up to 130 HP, Part 13003","description":"\u003cp\u003eThe CMC BA-130 Breakaway Unit (Part 13003) is a transom-mounted safety unit built for duck hunters and fishermen who run small boats and motors through shallow, stump-filled water. It is installed between the outboard motor and the boat transom, and it is rated for outboard motors up to a maximum of 130 HP. When the boat is run at speeds under 5 miles per hour in the forward direction and the motor strikes a submerged log or other obstruction, momentum causes the motor to deflect and rotate up to 45 degrees, allowing the lower unit to slide over the obstruction instead of taking a direct hit. This helps minimize damage to both the outboard motor and the transom.\u003c\/p\u003e\u003cp\u003eA built-in drawbar spring returns the motor to its normal running position and holds it there while operating in reverse at low RPM. The BA-130 is not designed to absorb impacts while the boat is being operated in reverse. The unit is pre-drilled with the standard B.I.A. Bolt hole pattern for straightforward installation on compatible transoms. For outboard motors that mount using clamps with thumb screws, the T-H-13022 Transom Clamp Adapter is required in addition to the BA-130.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Rating:\u003c\/strong\u003e Up to 130 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Back:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection Angle:\u003c\/strong\u003e Up to 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Speed for Breakaway Function:\u003c\/strong\u003e Under 5 miles per hour, forward direction only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e Standard B.I.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Transom mount, between motor and transom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 19.25 x 19.25 x 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739697130034\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutboard motors up to a maximum of 130 HP\u003c\/li\u003e\n\u003cli\u003eMotors with clamps that have thumb screws require the T-H-13022 Transom Clamp Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the CMC BA-130 Breakaway Unit do?\u003c\/strong\u003e The CMC BA-130 (Part 13003) mounts between an outboard motor and the boat transom so the motor can deflect and slide over submerged logs, stumps, or debris at low speeds instead of taking a direct impact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum HP rating for the BA-130?\u003c\/strong\u003e The BA-130 is rated for outboard motors up to a maximum of 130 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the BA-130 protect my motor if I hit something in reverse?\u003c\/strong\u003e No. The BA-130 is designed to help minimize damage only when an obstruction is encountered while running under 5 miles per hour in the forward direction, not while operating in reverse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far does the motor rotate when it hits an obstruction?\u003c\/strong\u003e Momentum causes the motor to deflect and rotate up to 45 degrees on the BA-130, allowing the motor to slide over the obstruction before the drawbar spring returns it to its normal position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BA-130 fit standard bolt patterns?\u003c\/strong\u003e Yes, the unit is pre-drilled with the standard B.I.A. Bolt hole pattern used for outboard motor mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any additional parts to install the BA-130?\u003c\/strong\u003e If your outboard motor mounts using clamps with thumb screws, you will also need the T-H-13022 Transom Clamp Adapter in addition to the BA-130 unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the BA-130 weigh?\u003c\/strong\u003e The CMC BA-130 Breakaway Unit weighs 31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the BA-130?\u003c\/strong\u003e The BA-130 measures 19.25 x 19.25 x 7.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the BA-130 made of, and what color is it?\u003c\/strong\u003e The BA-130 is constructed from metal and finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BA-130 differ from a tilt and trim unit?\u003c\/strong\u003e The BA-130 is a passive breakaway safety mount that lets the motor deflect over obstructions at low speed, while a tilt and trim unit is a powered device for raising and lowering the motor; they serve different purposes even though both mount between the motor and transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the motor in its normal running position after it deflects?\u003c\/strong\u003e A drawbar spring built into the BA-130 pulls the motor back to its normal position and holds it there while running in reverse at low RPM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho is the BA-130 breakaway unit designed for?\u003c\/strong\u003e It is designed for duck hunters and fishermen running small boats and motors in shallow, stump-filled water where submerged debris is common.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442835675,"sku":"T-H-13003","price":614.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-13003_lg__99313.1651754511.500.750.jpg?v=1785163481"},{"product_id":"t-h-marine-cmc-bottom-transom-washer-plate-3-8-inch-6061-t6-aluminum-9-7-8-inch-hole-centers","title":"T-H Marine CMC Bottom Transom Washer Plate, 3\/8 Inch 6061-T6 Aluminum, 9-7\/8 Inch Hole Centers","description":"\u003cp\u003eThe T-H Marine CMC Bottom Transom Washer Plate is a load-distributing backing plate designed to be installed on the lower side of the transom where an outboard, jack plate, or Power-Lift bracket is bolted through. It is machined from strong 3\/8 inch 6061-T6 alloy aluminum, not cast aluminum, giving it the strength to hold up under the high clamping loads of performance engines without deforming or cracking the way lighter cast plates can.\u003c\/p\u003e\u003cp\u003eIts main job is to spread bolt loads evenly across the transom surface. Without a washer plate, mounting bolts can concentrate pressure into small contact points and, over time, begin biting into the transom material, compressing the wood or coring underneath and loosening the mounting hardware. By sandwiching a rigid aluminum plate between the bolt heads or nuts and the transom, the CMC Bottom Transom Washer Plate keeps that load spread out, which helps protect the transom and keep the mounting hardware tight, particularly on high performance engines that put more stress on the transom during hard acceleration and trim changes.\u003c\/p\u003e\u003cp\u003eThe plate uses a 9-7\/8 inch hole center pattern. It is intended for use as the bottom-side counterpart in a transom mounting setup and installs using standard hand tools alongside the existing mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 20032\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plate Accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/8 Inch 6061-T6 Alloy Aluminum (Not Cast Aluminum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Centers:\u003c\/strong\u003e 9-7\/8 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Position:\u003c\/strong\u003e Bottom (transom underside)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572020032\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal bottom-side transom washer plate sized to a 9-7\/8 inch hole center pattern; not restricted to a specific engine make or model in available records.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CMC Bottom Transom Washer Plate used for?\u003c\/strong\u003e It is a backing plate that sits against the underside of the transom to spread out the clamping load from outboard, jack plate, or Power-Lift mounting bolts, part number 20032 in 3\/8 inch 6061-T6 alloy aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hole pattern does the 20032 washer plate use?\u003c\/strong\u003e The bottom transom washer plate uses a 9-7\/8 inch hole center pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this washer plate cast aluminum?\u003c\/strong\u003e No, the T-H Marine CMC Bottom Transom Washer Plate is made from 3\/8 inch 6061-T6 alloy aluminum, not cast aluminum, which gives it more strength under high mounting loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this transom washer plate weigh?\u003c\/strong\u003e The CMC Bottom Transom Washer Plate weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do I need a washer plate on my transom?\u003c\/strong\u003e A washer plate spreads bolt loads evenly across the transom instead of letting them concentrate at the bolt heads, which helps stop mounting bolts from biting into and compressing the transom, especially on high performance engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a difference between the top and bottom transom washer plate?\u003c\/strong\u003e Yes, the part described here (20032) is the bottom-side washer plate, installed on the underside of the transom; a separate top-side washer plate with a different hole spacing is sold as its own part for use on the opposite face of the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 20032 washer plate come with mounting bolts?\u003c\/strong\u003e The listed contents are the aluminum washer plate itself; it is designed to be used with your existing transom mounting hardware rather than a separate bolt kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this washer plate work with a jack plate or Power-Lift bracket?\u003c\/strong\u003e The CMC Bottom Transom Washer Plate is designed as a load-distributing backing plate for transom-mounted hardware such as jack plates and Power-Lift brackets, based on its 9-7\/8 inch hole spacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CMC Bottom Transom Washer Plate suitable for high performance engines?\u003c\/strong\u003e Yes, its 3\/8 inch 6061-T6 aluminum construction is intended specifically to more evenly distribute mounting loads on high performance engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 20032 transom washer plate made of?\u003c\/strong\u003e It is made of strong 3\/8 inch 6061-T6 alloy aluminum, specifically not cast aluminum, for added durability under load.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442868443,"sku":"T-H-20032","price":60.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-20023_lg__52261.1558133114.500.750.jpg?v=1785163481"},{"product_id":"t-h-marine-cmc-transom-wedges-20122-2-degree-set-back-spacer-kit-for-power-lift-transom-brackets","title":"T-H Marine CMC Transom Wedges 20122, 2 Degree Set Back Spacer Kit for Power-Lift Transom Brackets","description":"\u003cp\u003eThe T-H Marine CMC Transom Wedges (part number 20122) are 2 degree wedges built to add extra positive or negative trim to your boat's transom. They serve as an aid for boats with an insufficient transom angle, or for boats experiencing planing problems at low speed, helping the hull find plane more efficiently. Beyond their primary role as trim wedges, the design allows the same set to double as set back spacers simply by inverting the 2, 4, and 6 wedge sets, giving you added mounting flexibility without buying a separate part. The hole pattern is drilled to match the Power-Lift transom bracket and standard motor mounting pattern, so the wedges install using the existing bolt holes without additional drilling. Each wedge measures 1\/2 inch x 4 inch x 11 1\/4 inch, and the set is finished in an off-white color. This is a practical, purpose-built solution for boaters looking to correct trim geometry or reposition their motor mount without replacing the transom bracket itself.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 20122\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWedge Angle:\u003c\/strong\u003e 2 Degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Trim Wedge or Set Back Spacer (invert 2, 4, and 6 wedge sets to convert)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Pattern:\u003c\/strong\u003e Matches Power-Lift transom bracket and standard motor mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions (per wedge):\u003c\/strong\u003e 1\/2 inch x 4 inch x 11 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12 inches x 4.9 inches x 1.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Off-white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to fit the same hole pattern as the Power-Lift transom bracket and standard motor mounting setups.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat do the T-H Marine CMC Transom Wedges (20122) do?\u003c\/strong\u003e They are 2 degree wedges that add extra positive or negative trim to a boat's transom, used to correct an insufficient transom angle or to help a boat that has planing problems at low speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these wedges be used as set back spacers instead of trim wedges?\u003c\/strong\u003e Yes, the 20122 wedge set is designed so you can invert the 2, 4, and 6 wedge sets and use the same kit as set back spacers rather than trim wedges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hole pattern on the CMC transom wedges?\u003c\/strong\u003e The hole pattern on part number 20122 matches the Power-Lift transom bracket and standard motor mounting pattern, so it lines up with existing mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is each transom wedge?\u003c\/strong\u003e Each wedge in the 20122 set measures 1\/2 inch x 4 inch x 11 1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the T-H Marine CMC transom wedges?\u003c\/strong\u003e The 20122 transom wedge set has an off-white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the transom wedge set weigh?\u003c\/strong\u003e The T-H Marine CMC Transom Wedges, part number 20122, weigh 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these wedges fix a boat that won't get on plane at low speed?\u003c\/strong\u003e The 2 degree angle on the 20122 transom wedges is specifically intended to help boats with planing problems at low speed or an insufficient transom angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to drill new holes to install the CMC transom wedges?\u003c\/strong\u003e No, since the 20122 wedge set uses the same hole pattern as the Power-Lift transom bracket and standard motor mounting, it installs using the existing mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for part 20122?\u003c\/strong\u003e No OEM replacement or cross-reference numbers are listed for the T-H Marine CMC Transom Wedges, part number 20122.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the CMC 5 Inch Motor Mount Vertical Extension?\u003c\/strong\u003e The 20122 transom wedges adjust trim angle or set back position using shims at the existing mounting holes, while the CMC 5 Inch Motor Mount Vertical Extension is a separate bracket component that raises the motor up to 5 inches higher than standard transom mounting.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027442999515,"sku":"T-H-20122","price":66.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-20122_lg__84790.1651754593.500.750.jpg?v=1785163481"},{"product_id":"t-h-marine-cmc-50012-5-inch-motor-mount-vertical-extension-up-thru-v-6","title":"T-H Marine CMC 50012 5 Inch Motor Mount Vertical Extension, Up Thru V-6","description":"\u003cp\u003eThe T-H Marine CMC 50012 is a 5 inch vertical extension for boat motor mounts, designed to raise the outboard mounting height up to 5 inches above the standard transom mounting position. Its primary use is converting a propeller-driven boat to a jet drive setup. An alternate application is mounting the extension onto a hydraulic Power-Lift, allowing shallow-running boats already fitted with a tunnel extension to run the motor higher for improved performance in skinny water.\u003c\/p\u003e\u003cp\u003eThe CMC 50012 is built from extruded 6061-T6 aluminum alloy, a heavy-gauge material chosen for its resistance to corrosion and long-term durability in marine environments. It operates as a static mount (no moving parts) and is rated for motors up thru V-6. The unit has a 1\/2 inch set back and measures 5 inches wide by 20-1\/2 inches high when mounted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 50012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739697500127\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor HP Rating:\u003c\/strong\u003e Up thru V-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Back:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Static\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Extruded 6061-T6 Aluminum Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 inches wide x 20-1\/2 inches high (mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Height Increase:\u003c\/strong\u003e Up to 5 inches above standard transom mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotors rated up thru V-6\u003c\/li\u003e\n\u003cli\u003eUsed for converting propeller-driven boats to jet drive\u003c\/li\u003e\n\u003cli\u003eCompatible for mounting on a hydraulic Power-Lift for shallow running boats with tunnel extensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the T-H Marine CMC 50012 vertical extension do?\u003c\/strong\u003e The CMC 50012 raises the outboard motor mounting position up to 5 inches higher than the standard transom mounting height, primarily for converting a propeller-driven boat to a jet drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this extension be used with a hydraulic Power-Lift?\u003c\/strong\u003e Yes, the CMC 50012 can be mounted on a hydraulic Power-Lift, which is useful on shallow running boats that are already equipped with a tunnel extension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the CMC 50012 rated for?\u003c\/strong\u003e This vertical extension carries a motor HP rating of up thru V-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CMC 50012 made from?\u003c\/strong\u003e It is constructed from extruded 6061-T6 aluminum alloy, chosen for corrosion resistance and long wear in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CMC 50012 weigh?\u003c\/strong\u003e The T-H Marine CMC 50012 vertical extension weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the CMC 50012 when mounted?\u003c\/strong\u003e Once mounted, the CMC 50012 measures 5 inches wide by 20-1\/2 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much set back does the CMC 50012 have?\u003c\/strong\u003e The unit has a 1\/2 inch set back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CMC 50012 a static mount or does it move?\u003c\/strong\u003e The CMC 50012 is a static (non-moving) motor mount extension, not a hydraulic or adjustable unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need a vertical motor mount extension like the CMC 50012?\u003c\/strong\u003e Boaters use the CMC 50012 mainly to convert a propeller-driven craft to a jet drive, or to mount an outboard higher on shallow running boats with tunnel extensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this T-H Marine CMC extension?\u003c\/strong\u003e The manufacturer part number is 50012.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027443032283,"sku":"T-H-50012","price":213.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/50012__67852.1737891932.500.750.jpg?v=1785163481"},{"product_id":"cmc-65213-2-1-2-inch-static-set-back-plate-v6-outboard-jack-plate-spacer","title":"CMC 65213 2-1\/2 Inch Static Set Back Plate - V6 Outboard Jack Plate Spacer","description":"\u003cp\u003eThe CMC 65213 is a 2-1\/2 inch static set back plate that repositions an outboard motor further behind the transom, giving the boat a total of 1-1\/2 inches of adjustment travel at the mounting bracket. Moving the motor's set back further from the hull helps reduce drag, improves handling, and allows an outboard to run more efficiently at speed. This plate is designed for outboard motors up through V6, and is commonly installed together with a CMC manual or hydraulic Power-Lift transom jack to reach a combined total of 8 inches of set back for boaters who want both fixed spacing and adjustable lift in one setup.\u003c\/p\u003e\u003cp\u003eConstruction is extruded 6061-T6 aluminum alloy for a strong, corrosion-resistant plate that stands up to fresh and salt water use, and it is fastened with stainless steel hardware. The plate measures 15-1\/8 inches wide by 13-5\/8 inches tall, giving a solid mounting footprint for the motor bracket and transom bracket. At 13 pounds, it is a substantial, one-piece component intended to be bolted directly between the transom and the motor mounting hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CMC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 65213\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Back:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Travel:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e Up through V6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Extruded 6061-T6 Aluminum Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 15-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 13-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 7335723\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for outboard motors up through V6\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CMC 65213 set back plate used for?\u003c\/strong\u003e It moves an outboard motor 2-1\/2 inches further behind the transom, which reduces drag and can improve top-end speed and handling on motors up through V6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much adjustment travel does the 65213 provide?\u003c\/strong\u003e The CMC 65213 static set back plate provides 1-1\/2 inches of travel at the transom bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 65213 an adjustable jack plate?\u003c\/strong\u003e No, the 65213 is a static set back plate, not a power-lift jack. It fixes the motor 2-1\/2 inches further back from the transom; for on-the-water height adjustment, it is typically paired with a separate CMC manual or hydraulic Power-Lift transom jack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CMC 65213 be combined with a CMC Power-Lift transom jack?\u003c\/strong\u003e Yes, the 65213 static set back plate is commonly installed together with a CMC manual or hydraulic Power-Lift jack to reach a combined total of 8 inches of set back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat motors is the CMC 65213 rated for?\u003c\/strong\u003e The CMC 65213 set back plate is designed for outboard motors up through V6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CMC 65213 made from?\u003c\/strong\u003e It is constructed of extruded 6061-T6 aluminum alloy and is assembled with stainless steel fasteners for strength and corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the CMC 65213 plate?\u003c\/strong\u003e The plate measures 15-1\/8 inches wide by 13-5\/8 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CMC 65213 weigh?\u003c\/strong\u003e The CMC 65213 static set back plate weighs 13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CMC 65213 include mounting hardware?\u003c\/strong\u003e Yes, stainless steel fasteners are included with the CMC 65213 set back plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 65213 work with a standard outboard mounting bracket?\u003c\/strong\u003e The CMC 65213 is a set back plate sized for motors up through V6 and mounts between the transom and the motor bracket using its included stainless steel fasteners.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027443294427,"sku":"T-H-65213","price":162.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-H-65213_lg__59998.1651754820.500.750.jpg?v=1785163487"},{"product_id":"bobs-machine-100-105001-clamp-on-motor-adapter-plate-for-kick-back-jac-plates-up-to-115-hp","title":"Bob's Machine 100-105001 Clamp-On Motor Adapter Plate for Kick-Back Jac Plates, Up to 115 HP","description":"\u003cp\u003eThe Bob's Machine 100-105001 Clamp-On Motor Adapter Plate is an optional accessory that allows clamp-on outboard motors to be mounted to a Bob's Machine Kick-Back Jac Plate. It is designed for use with Bob's Machine Kick Back Jacs, giving boaters with clamp-on motors the same kick-up jack plate functionality available to bolt-on motor setups.\u003c\/p\u003e\u003cp\u003eThe adapter plate is rated for outboard motors up to a maximum of 115 HP and uses the BIA bolt pattern. Delrin rollers and bearings provide smooth, long-lasting operation and pivoting without the need for chains or springs. Integrated locking pins keep the plate from kicking out when the motor is in reverse or while trailering. Pivot points are greaseable via automotive zerk fittings for easy long-term maintenance, and a motor tether attachment point is included for added safety.\u003c\/p\u003e\u003cp\u003eAs with the Kick-Back Jac Plate it is designed to work with, this adapter plate is not intended to encounter obstructions at speeds over 5 MPH, and only in the forward direction; it is not designed or intended to encounter obstructions while the boat is operated in reverse.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-105001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Clamp-On Motor Adapter Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 17.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt:\u003c\/strong\u003e 45 degree tilt up (kick up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e Up to 115 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e BIA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing System:\u003c\/strong\u003e Delrin rollers and bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Points:\u003c\/strong\u003e Greaseable, automotive zerk fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 23 x 19 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 489394319367\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Bob's Machine Kick-Back Jac Plate and Hydraulic Kick-Back Jac Plate (as optional clamp-on style kit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutboard motors up to 115 HP\u003c\/li\u003e\n\u003cli\u003eClamp-on style motor mounts\u003c\/li\u003e\n\u003cli\u003eBIA bolt pattern\u003c\/li\u003e\n\u003cli\u003eUsed with Bob's Machine Kick-Back Jac Plate and Hydraulic Kick-Back Jac Plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine 100-105001 Clamp-On Motor Adapter Plate used for?\u003c\/strong\u003e It is an optional adapter plate that allows clamp-on outboard motors to be mounted to a Bob's Machine Kick-Back Jac Plate, extending kick-up jack plate functionality to clamp-on motor setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for this adapter plate?\u003c\/strong\u003e The 100-105001 adapter plate is rated for outboard motors up to a maximum of 115 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 100-105001 adapter use a standard bolt pattern?\u003c\/strong\u003e Yes, it uses the BIA bolt pattern, matching the bolt pattern used by Bob's Machine Kick-Back Jac Plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bob's Machine 100-105001 adapter plate weigh?\u003c\/strong\u003e The 100-105001 Clamp-On Motor Adapter Plate weighs 15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this adapter plate?\u003c\/strong\u003e It measures 17.5 inches wide by 12 inches tall, with a 5.5 inch offset.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 100-105001 adapter include a tilt-up feature?\u003c\/strong\u003e Yes, it provides a 45 degree tilt up (kick up), matching the tilt of the Bob's Machine Kick-Back Jac Plate it mounts to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the plate from kicking out in reverse or while trailering?\u003c\/strong\u003e Integrated locking pins on the 100-105001 adapter plate prevent it from kicking out when the motor is in reverse or during trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the rollers and bearings made of?\u003c\/strong\u003e Delrin rollers and bearings are used, providing smooth operation and long life without the need for chains or springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Bob's Machine jack plates is the 100-105001 adapter compatible with?\u003c\/strong\u003e The 100-105001 Clamp-On Motor Adapter Plate is designed for use with Bob's Machine Kick Back Jacs, including the Kick-Back Jac Plate and the Hydraulic Kick-Back Jac Plate, as an optional clamp-on style kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the pivot points on this adapter plate maintainable?\u003c\/strong\u003e Yes, the pivot points are greaseable and use automotive zerk fittings for easy long-term maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 100-105001 adapter plate include a motor tether attachment point?\u003c\/strong\u003e Yes, a motor tether attachment point is included for added safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this adapter plate be used with obstructions at higher speeds or in reverse?\u003c\/strong\u003e No. The 100-105001 adapter plate, used with a Bob's Machine Kick-Back Jac Plate, is not designed to encounter obstructions at speeds over 5 MPH, and only in the forward direction; it is not intended for encountering obstructions while operating in reverse.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464691931,"sku":"BOB-100-105001","price":247.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/100-105001__51470.1722503405.500.750.jpg?v=1785163490"},{"product_id":"bobs-machine-shop-kick-back-jac-plate-45-degree-tilt-up-jack-plate-for-outboards-up-to-115-hp","title":"Bob's Machine Shop Kick-Back Jac Plate - 45 Degree Tilt Up Jack Plate for Outboards up to 115 HP","description":"\u003cp\u003eThe Bob's Machine Shop Kick-Back Jac Plate, also known as the \"Stump Jumper,\" is a jack plate that gives outboard motors up to 115 HP a 45 degree tilt up (kick up) function. Instead of relying on chains or springs like many other jack plates, it uses Delrin rollers and bearings at the pivot points to deliver smooth, long-lasting kick-up operation. Integrated locking pins hold the plate in place so it will not kick out unexpectedly when the motor is run in reverse or while the boat is being trailered. A motor tether attachment point is built in for added safety, and the pivot points are greaseable through automotive zerk fittings for straightforward maintenance.\u003c\/p\u003e\u003cp\u003eThis jack plate is rated for outboard motors up to a maximum of 115 HP and is designed to let the motor kick up when it contacts an obstruction while moving forward at speeds up to 5 MPH; it is not designed or intended to encounter obstructions while the boat is operating in reverse. The plate measures 17.5 inches wide by 12 inches high with a 5.5 inch offset. For boaters running a clamp-on outboard, Bob's Machine Shop also offers an optional Clamp-On Motor Adapter Plate (part number 100-105001) that works with this Kick-Back Jac Plate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-105000-NOPC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 34.85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 17.5 inches wide x 12 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Angle:\u003c\/strong\u003e 45 degrees (kick up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower:\u003c\/strong\u003e 115 horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing\/Roller Type:\u003c\/strong\u003e Delrin rollers and bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Points:\u003c\/strong\u003e Greaseable, automotive zerk fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010948\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessory:\u003c\/strong\u003e Clamp-On Motor Adapter Plate, part number 100-105001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits outboard motors up to a maximum of 115 HP\u003c\/li\u003e\n\u003cli\u003eKick-up action intended for forward-direction contact with obstructions at speeds up to 5 MPH; not intended for reverse-direction impacts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the Bob's Machine Shop Kick-Back Jac Plate?\u003c\/strong\u003e The Kick-Back Jac Plate, part number 100-105000-NOPC, is rated for outboard motors up to a maximum of 115 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The Bob's Machine Shop Kick-Back Jac Plate weighs 34.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and offset of this jack plate?\u003c\/strong\u003e The plate measures 17.5 inches wide by 12 inches high, with a 5.5 inch offset and a 45 degree tilt up (kick up) angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called the \"Stump Jumper\"?\u003c\/strong\u003e The Kick-Back Jac Plate is also known as the \"Stump Jumper\" because its kick-up design lets the motor tilt up 45 degrees when it contacts an obstruction while moving forward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this jack plate kick up while running in reverse?\u003c\/strong\u003e No. The Kick-Back Jac Plate, 100-105000-NOPC, is designed to encounter obstructions only in the forward direction at speeds up to 5 MPH; it is not designed or intended for obstructions encountered while operating in reverse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the jack plate from kicking out during trailering or reverse operation?\u003c\/strong\u003e Integrated locking pins hold the Kick-Back Jac Plate in position so it will not kick out unexpectedly when the motor is in reverse or while the boat is being trailered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the rollers and bearings made from?\u003c\/strong\u003e The Bob's Machine Shop Kick-Back Jac Plate uses Delrin rollers and bearings, which allow smooth pivoting and long life without the chains or springs found on some other jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate need regular maintenance?\u003c\/strong\u003e Yes, the pivot points on the 100-105000-NOPC Kick-Back Jac Plate are greaseable through automotive zerk fittings, making routine maintenance straightforward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a safety attachment point for the motor?\u003c\/strong\u003e Yes, the Kick-Back Jac Plate includes a motor tether attachment point for added safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate suitable for saltwater use?\u003c\/strong\u003e Yes, the Bob's Machine Shop Kick-Back Jac Plate is recommended for use in salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this jack plate with a clamp-on outboard motor?\u003c\/strong\u003e Yes, for clamp-on motors Bob's Machine Shop offers an optional Clamp-On Motor Adapter Plate, part number 100-105001, that is designed to work with the Kick-Back Jac Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color finish does this jack plate come in?\u003c\/strong\u003e The Bob's Machine Shop Kick-Back Jac Plate, 100-105000-NOPC, has a silver finish.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464724699,"sku":"BOB-100-105000","price":787.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/100-105000__88911.1722484762.500.750.jpg?v=1785163490"},{"product_id":"bobs-machine-shop-ultra-hd-hydraulic-jack-plate-4-inch-setback-300-hp-max","title":"Bob's Machine Shop Ultra HD Hydraulic Jack Plate, 4 Inch Setback, 300 HP Max","description":"\u003cp\u003eThe Bob's Machine Shop Ultra HD Hydraulic Jack Plate is a 4 inch setback hydraulic jack plate built for outboards up to 300 horsepower and 625 pounds. It is designed to improve an outboard boat's speed, holeshot, and fuel efficiency, and to help the boater navigate in shallow water by adjusting the outboard's height and setback relative to the transom.\u003c\/p\u003e\u003cp\u003eThis is a one piece design, so no separate setback spacers are needed to achieve the correct setback. The hydraulic pump is mounted inside the boat rather than on the transom, keeping weight off the back of the boat and improving handling. The jack plate provides a minimum lift above a standard transom of 7-1\/2 inches, with 1-1\/2 inches built in and 6 inches of rise. Construction is aluminum and stainless steel for corrosion resistance in marine environments, finished in silver.\u003c\/p\u003e\u003cp\u003eThe complete package includes the lift, controls, pump, switch, hoses, instructions, and oil. It carries a limited lifetime structural workmanship warranty to the original end user, a 60 month warranty on the hydraulic pump against defects in quality and workmanship, and a 12 month warranty on the wire harness and solenoids.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-104100-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Ultra HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Service Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches (10 centimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate Weight:\u003c\/strong\u003e 38 pounds (17 kilograms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Outboard Horsepower:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Outboard Weight:\u003c\/strong\u003e 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Lift Above Standard Transom:\u003c\/strong\u003e 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Weight:\u003c\/strong\u003e 65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural Warranty:\u003c\/strong\u003e Limited lifetime, original end user\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Pump Warranty:\u003c\/strong\u003e 60 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness and Solenoid Warranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 894721000000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does the Ultra HD jack plate provide?\u003c\/strong\u003e The Bob's Machine Shop Ultra HD Hydraulic Jack Plate provides a 4 inch (10 centimeter) setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much horsepower and outboard weight can this jack plate handle?\u003c\/strong\u003e This Ultra HD model is rated for outboards up to 300 horsepower and 625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Ultra HD jack plate itself weigh?\u003c\/strong\u003e The plate weighs 38 pounds (17 kilograms); the complete packaged item weighs 65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the jack plate made from?\u003c\/strong\u003e It is constructed from aluminum and stainless steel, finished in silver, for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the hydraulic pump mounted?\u003c\/strong\u003e On the Ultra HD jack plate, the hydraulic pump is mounted inside the boat rather than on the transom, which keeps weight off the back of the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much lift does the jack plate add above a standard transom?\u003c\/strong\u003e The minimum lift above a standard transom is 7-1\/2 inches, made up of 1-1\/2 inches built in plus 6 inches of rise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Ultra HD jack plate?\u003c\/strong\u003e The package includes the lift, controls, hydraulic pump, switch, hoses, instructions, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate need separate setback spacers?\u003c\/strong\u003e No. The Ultra HD jack plate uses a one piece design, so no separate setback spacers are required to achieve the 4 inch setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Ultra HD jack plate?\u003c\/strong\u003e It carries a limited lifetime structural workmanship warranty to the original end user, a 60 month warranty on the hydraulic pump, and a 12 month warranty on the wire harness and solenoids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Ultra HD and the Ultra Light model?\u003c\/strong\u003e The Ultra HD (100-104100-NOPC-NOSPN-NG) is rated to 300 horsepower and 625 pounds with a 38 pound plate, while the Ultra Light model is rated to 115 horsepower and 425 pounds with a lighter 33 pound plate; both share the same 4 inch setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a jack plate do for an outboard boat?\u003c\/strong\u003e A jack plate like this Ultra HD model adjusts the outboard's mounting height and setback to improve speed, holeshot, fuel efficiency, and shallow-water handling.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464790235,"sku":"BOB-100-104100HD","price":1645.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81w1cjQvv1L.jpg?v=1785331101"},{"product_id":"bobs-machine-shop-action-series-4-inch-jack-plate","title":"Bob's Machine Shop Action Series 4 Inch Jack Plate","description":"\u003cp\u003eThe Bob's Machine Shop Action Series 4 Inch Jack Plate is a jack plate built to mount between the boat's transom and the outboard engine, providing 4 inches of engine setback. Moving the engine's mounting position away from the transom via a jack plate is a common way to adjust engine height and setback on a boat. This unit is part of Bob's Machine Shop's Action Series jack plate lineup and is identified by part number 100-104101-NOPC-NOSPN-NG.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-104101-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Action Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377011532\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine Shop Action Series 4 Inch Jack Plate used for?\u003c\/strong\u003e It is a jack plate that mounts between the transom and the outboard engine, giving 4 inches of engine setback as part of Bob's Machine Shop's Action Series lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does this jack plate provide?\u003c\/strong\u003e The Action Series 4 Inch Jack Plate from Bob's Machine Shop provides 4 inches of setback, as indicated by its name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Action Series 4 Inch Jack Plate weigh?\u003c\/strong\u003e This jack plate weighs 65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this jack plate?\u003c\/strong\u003e The manufacturer part number is 100-104101-NOPC-NOSPN-NG, the public part number for the Bob's Machine Shop Action Series 4 Inch Jack Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this jack plate?\u003c\/strong\u003e This jack plate is made by Bob's Machine Shop, under its Action Series product line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat product category does this item fall under?\u003c\/strong\u003e The Action Series 4 Inch Jack Plate is categorized as a jack plate, used for outboard engine mounting adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate fit a specific boat or engine model?\u003c\/strong\u003e No specific boat or engine fitment details are published for the Bob's Machine Shop Action Series 4 Inch Jack Plate; buyers should confirm compatibility with their setup before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC code for the Action Series 4 Inch Jack Plate?\u003c\/strong\u003e The UPC for this jack plate is 818377011532.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers listed for this jack plate?\u003c\/strong\u003e No OEM cross-reference or replacement part numbers are published for the Bob's Machine Shop Action Series 4 Inch Jack Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Action Series 4 Inch Jack Plate part of a larger product family?\u003c\/strong\u003e Yes, it belongs to Bob's Machine Shop's Action Series line of jack plates.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464823003,"sku":"BOB-100-104101-NOPC-NOSPN-NG","price":1645.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_0c419d86-0007-494d-be6d-910c4680b699.jpg?v=1785348117"},{"product_id":"bobs-machine-100-105100-hydraulic-kick-back-jac-plate-6-inch-setback-up-to-115-hp-outboards","title":"Bob's Machine 100-105100 Hydraulic Kick-Back Jac Plate, 6 Inch Setback, Up to 115 HP Outboards","description":"\u003cp\u003eThe Bob's Machine 100-105100 Hydraulic Kick-Back Jac Plate is an Action Series jack plate built to let boaters jack up the outboard and idle over shallow obstructions without risking costly lower unit damage. It combines a 6 inch hydraulic stroke with a 1.5 inch built-in structure lift for 7.5 inches of total lift, giving the operator real clearance in skinny water. The Kick-Back design lets the plate give way if it contacts a submerged obstacle while running forward at low speed, then return to position, protecting the motor and lower unit from impact. Delrin rollers and bearings run the sliding and pivoting action, eliminating the chains and springs used on many competing jack plates and keeping operation smooth with minimal maintenance. Integrated locking pins hold the plate in place so it cannot kick out unexpectedly in reverse or while trailering, and greaseable pivot points with tension rods are built in for long-term durability. The plate tilts up to 30 degrees for improved clearance and maneuverability, and a motor tether attachment point is included for added safety. This jack plate is rated for outboard motors up to 115 HP and uses the standard BIA bolt pattern for mounting. It ships ready to install and is backed by Bob's Machine's 5-Year Action Pump Warranty. For clamp-on outboards, it can be paired with Bob's Machine's optional clamp-on style adapter kit, part number 100-105001, sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-105100-NOPC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Stroke:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Structure Lift:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Lift:\u003c\/strong\u003e 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Angle:\u003c\/strong\u003e 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Motor Rating:\u003c\/strong\u003e 115 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e BIA standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing\/Roller Material:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking System:\u003c\/strong\u003e Integrated locking pins for reverse and trailering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Points:\u003c\/strong\u003e Greaseable, with tension rods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 23 x 19 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010887\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-Year Action Pump Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessory:\u003c\/strong\u003e Optional clamp-on style adapter plate, part number 100-105001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe 100-105100-NOPC Hydraulic Kick-Back Jac Plate is rated for outboard motors up to 115 HP and mounts using the standard BIA bolt pattern. Do not use it to encounter obstructions at speeds over 5 MPH, and only while running in the forward direction; it is not designed to encounter obstructions while operating in reverse.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the total lift on the Bob's Machine 100-105100 Hydraulic Kick-Back Jac Plate?\u003c\/strong\u003e It provides 7.5 inches of total lift, combining a 6 inch hydraulic stroke with a 1.5 inch built-in structure lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower outboards is this jack plate rated for?\u003c\/strong\u003e The 100-105100-NOPC Hydraulic Kick-Back Jac Plate is rated for outboard motors up to 115 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bob's Machine 100-105100 jack plate weigh?\u003c\/strong\u003e This jack plate weighs 75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate use chains or springs?\u003c\/strong\u003e No. The 100-105100-NOPC uses Delrin rollers and bearings for smooth sliding and pivoting instead of chains or springs, reducing maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does the Bob's Machine Hydraulic Kick-Back Jac Plate use?\u003c\/strong\u003e It mounts using the standard BIA bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this jack plate over submerged obstacles at any speed or in reverse?\u003c\/strong\u003e No. The Kick-Back feature is intended for forward-direction operation at speeds up to 5 MPH; it is not designed to encounter obstructions while operating in reverse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the plate from kicking out while trailering?\u003c\/strong\u003e Integrated locking pins on the 100-105100-NOPC hold the plate in position and prevent it from kicking out in reverse or while trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bob's Machine 100-105100 jack plate need to be greased?\u003c\/strong\u003e Yes, the pivot points are greaseable, and tension rods are included to support long-term durability and performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the tilt range on this jack plate?\u003c\/strong\u003e The 100-105100-NOPC tilts up to 30 degrees for improved clearance and maneuverability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this jack plate be used with a clamp-on outboard motor?\u003c\/strong\u003e Yes, it can be used with Bob's Machine's optional clamp-on style adapter kit, part number 100-105001, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bob's Machine 100-105100 Hydraulic Kick-Back Jac Plate?\u003c\/strong\u003e It is backed by a 5-Year Action Pump Warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 100-105100 jack plate?\u003c\/strong\u003e The product measures 23 x 19 x 12 inches.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464855771,"sku":"BOB-100-105100","price":1850.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/100-105100__84521.1753706831.500.750.jpg?v=1785163490"},{"product_id":"bobs-machine-6-action-series-hydraulic-kick-back-jack-plate-powder-coated-black-up-to-150-hp","title":"Bob's Machine 6\" Action Series Hydraulic Kick-Back Jack Plate - Powder-Coated Black, Up to 150 HP","description":"\u003cp\u003eThe Bob's Machine 6\" Action Series Hydraulic Kick-Back Jack Plate in a powder-coated black finish is a hydraulic setback jack plate built to protect the lower unit while improving boat handling in changing water conditions. It delivers a 6-inch hydraulic stroke combined with 1.5 inches of built-in structure lift for a total of 7.5 inches of lift, letting the operator raise the outboard to run shallower or clear submerged obstacles. The patented Kick-Back design allows the motor to react when it contacts a submerged obstacle, helping shield the lower unit and other vital components from impact damage.\u003c\/p\u003e\u003cp\u003eMotion is handled by Delrin bushings, rollers, and bearings for smooth, long-lasting operation without the chains or springs used on many competing jack plates. Greaseable pivot points with automotive zerk fittings keep the system serviceable over time. Integrated locking pins hold the plate in place in reverse and while trailering, and the unit includes a motor tether attachment point for added security. The plate offers a 30-degree tilt (kick-up) angle for improved clearance and maneuverability, and it is built with a 6-inch setback and a standard BIA bolt pattern for compatibility with outboard motors up to 150 HP. The powder-coated black finish adds corrosion resistance along with a clean, professional appearance for marine use. This jack plate is backed by a limited lifetime structure warranty plus a 3-year Action Pump warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-105100P-PCGBLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Stroke:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Structure Lift:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Lift:\u003c\/strong\u003e 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Angle:\u003c\/strong\u003e 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e Up to 150 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e BIA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Points:\u003c\/strong\u003e Greaseable with automotive zerk fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing System:\u003c\/strong\u003e Delrin bushings, rollers, and bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking System:\u003c\/strong\u003e Locking pins for reverse and trailering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Feature:\u003c\/strong\u003e Motor tether attachment point included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder-coated black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime structure warranty plus 3-year Action Pump warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377015837\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for outboard motors up to 150 HP using a standard BIA bolt pattern.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine 100-105100P-PCGBLK jack plate rated for?\u003c\/strong\u003e The 100-105100P-PCGBLK Action Series Hydraulic Kick-Back Jack Plate is rated for outboard motors up to 150 HP with a standard BIA bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much lift does this jack plate provide?\u003c\/strong\u003e It provides a 6-inch hydraulic stroke plus 1.5 inches of built-in structure lift, for 7.5 inches of total lift on the 100-105100P-PCGBLK jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does this jack plate have?\u003c\/strong\u003e This version of the Action Series Hydraulic Kick-Back Jack Plate has a powder-coated black finish, which adds corrosion resistance and a clean appearance for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the jack plate weigh?\u003c\/strong\u003e The Bob's Machine 100-105100P-PCGBLK Kick-Back Jack Plate weighs 71 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate use chains or springs?\u003c\/strong\u003e No. The 100-105100P-PCGBLK design relies on Delrin bushings, rollers, and bearings for smooth pivoting instead of chains or springs used on many other jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern is required for installation?\u003c\/strong\u003e The 100-105100P-PCGBLK jack plate is built for a standard BIA bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on this jack plate?\u003c\/strong\u003e Yes, the 100-105100P-PCGBLK carries a limited lifetime structure warranty plus a 3-year Action Pump warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum tilt angle?\u003c\/strong\u003e The Action Series Hydraulic Kick-Back Jack Plate tilts up to 30 degrees for improved clearance and maneuverability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Kick-Back feature protect the motor?\u003c\/strong\u003e The patented Kick-Back design lets the motor react when it contacts a submerged obstacle, helping protect the lower unit and other vital components on the 100-105100P-PCGBLK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the pivot points require maintenance?\u003c\/strong\u003e Yes, the pivot points on the 100-105100P-PCGBLK are greaseable with automotive zerk fittings for ongoing serviceability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a motor tether attachment included?\u003c\/strong\u003e Yes, a motor tether attachment point is built into the 100-105100P-PCGBLK for added safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback measurement on this jack plate?\u003c\/strong\u003e The Bob's Machine 100-105100P-PCGBLK has a 6-inch setback.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464954075,"sku":"BOB-100-105100P-PCGBLK","price":2054.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BOB-100-105100P-PCGBLK__84308.1780061479.500.750.jpg?v=1785163490"},{"product_id":"bobs-machine-hydraulic-jack-plate-6-inch-setback-300-hp-outboard-625-lb-capacity","title":"Bob's Machine Hydraulic Jack Plate, 6 Inch Setback, 300 HP Outboard, 625 lb Capacity","description":"\u003cp\u003eThe Bob's Machine 100-106000-NOPC-NOSPN-NG is a hydraulic jack plate built for outboard boats, giving the boater a way to adjust the mounting height and setback of the outboard motor to improve top speed, holeshot, fuel efficiency, and access to shallow water. This unit is built with a 6 inch setback and a one-piece design, so no separate setback spacers are needed to achieve that offset. The plate provides 7.5 inches of vertical lift for adjusting motor height, and is rated for outboard motors up to 300 HP and up to 625 lbs; motors heavier than that should use a heavier-duty jack plate instead.\u003c\/p\u003e\u003cp\u003eThe hydraulic pump is mounted remotely inside the boat rather than on the transom, which keeps the pump dry and protected from spray while also keeping weight off the transom and improving handling. The plate is constructed from alloy steel with a silver finish for durability in a marine environment, and includes automotive-style grease nipples for routine lubrication along with tension rods for structural rigidity. It is pre-drilled to accept dual side-mount power pole brackets, and ships complete with the hydraulic pump, wiring harness, hoses, control switch, and oil needed for installation. The structure carries a lifetime warranty and the hydraulic pump motor carries a 5 year warranty, both to the original end user. This jack plate is manufactured in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-106000-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Motor Weight:\u003c\/strong\u003e 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Location:\u003c\/strong\u003e Remote mount, internal (dry)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 64 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377014595\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure Warranty:\u003c\/strong\u003e Lifetime (original end user)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Motor Warranty:\u003c\/strong\u003e 5 years (original end user)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutboard motors up to 300 HP\u003c\/li\u003e\n\u003cli\u003eOutboard motors up to 625 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e100-106000-NOPC-NOSP\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does this jack plate provide?\u003c\/strong\u003e The Bob's Machine 100-106000-NOPC-NOSPN-NG has a 6 inch setback, built as a one-piece unit so no separate setback spacer is required to achieve that offset.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much lift does the jack plate offer?\u003c\/strong\u003e It provides 7.5 inches of vertical lift, letting the boater raise or lower the outboard motor for the best speed and holeshot in different water conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum motor size this jack plate can handle?\u003c\/strong\u003e This jack plate is rated for outboard motors up to 300 HP and up to 625 lbs; motors heavier than 625 lbs should use a heavier-duty jack plate instead of the 100-106000-NOPC-NOSPN-NG.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hydraulic pump mounted on the transom?\u003c\/strong\u003e No, the pump is remote-mounted inside the boat rather than on the transom. This keeps the pump dry and protected while also reducing the weight hanging off the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the jack plate made from?\u003c\/strong\u003e The 100-106000-NOPC-NOSPN-NG is constructed from alloy steel with a silver finish, built to hold up under marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this jack plate?\u003c\/strong\u003e The kit ships complete with the hydraulic pump, wiring harness, hoses, control switch, and oil needed to install the jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The Bob's Machine 100-106000-NOPC-NOSPN-NG weighs 64 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate support power pole brackets?\u003c\/strong\u003e Yes, it is pre-drilled for dual side-mount power pole brackets, so those brackets can be installed without additional drilling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this jack plate?\u003c\/strong\u003e The structure of the 100-106000-NOPC-NOSPN-NG carries a lifetime warranty to the original end user, and the hydraulic pump motor carries a 5 year warranty to the original end user.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent number for this part?\u003c\/strong\u003e Yes, the 100-106000-NOPC-NOSPN-NG has a listed OEM equivalent part number of 100-106000-NOPC-NOSP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this jack plate lubricated?\u003c\/strong\u003e It uses automotive-style grease nipples for routine lubrication, along with tension rods for structural rigidity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this jack plate manufactured?\u003c\/strong\u003e The Bob's Machine 100-106000-NOPC-NOSPN-NG is made in the USA.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464986843,"sku":"BOB-100-106000","price":1686.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51joImfvIJL.jpg?v=1785331101"},{"product_id":"bobs-machine-shop-action-series-6-inch-setback-hydraulic-jack-plate-with-internal-pump","title":"Bob's Machine Shop Action Series 6 Inch Setback Hydraulic Jack Plate with Internal Pump","description":"\u003cp\u003eThe Bob's Machine Shop Action Series Hydraulic Jack Plate (6 inch setback) is a hydraulic outboard jack plate built with the pump housed inside the jack plate structure itself. Housing the pump internally frees up space inside the boat and removes the need to mount a separate hydraulic pump, simplifying rigging. The Action Series uses a larger, more powerful motor than Bob's standard internal-pump jack plates, giving it greater lifting speed and the strength to raise heavy outboards even under full power.\u003c\/p\u003e\u003cp\u003eConstruction is aluminum with a silver finish, and the plate carries over Bob's Machine Shop's signature design details, including automotive-style grease nipples in the side rails and tension rods for secure, adjustable mounting. It is predrilled for dual side-mount Power Pole brackets, making it easier to add shallow-water anchors without additional fabrication. Each unit is made in the USA at Bob's Machine Shop in Tampa, Florida. This listing is the 6 inch setback version of the Action Series line, which is also offered in 8, 10, 12, and 14 inch setbacks for boaters needing more distance between the transom and the outboard.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-106010-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Location:\u003c\/strong\u003e Internal (built into jack plate structure)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 22 x 19 x 20 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 57.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Compatibility:\u003c\/strong\u003e Predrilled for dual side-mount Power Pole brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Made in USA (Tampa, Florida)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does this Bob's Machine Shop jack plate have?\u003c\/strong\u003e This Action Series jack plate (part number 100-106010-NOPC-NOSPN-NG) has a 6 inch setback. The Action Series line is also available in 8, 10, 12, and 14 inch setbacks for boaters who need more clearance between the transom and the outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the hydraulic pump located on this jack plate?\u003c\/strong\u003e The pump is built inside the jack plate structure itself rather than mounted separately inside the boat. This internal-pump design on the Bob's Machine Shop Action Series saves interior boat space and simplifies rigging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate made from aluminum?\u003c\/strong\u003e Yes, the Action Series Hydraulic Jack Plate is constructed of aluminum with a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The 6 inch setback Action Series Hydraulic Jack Plate weighs 57.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this jack plate?\u003c\/strong\u003e The Action Series Hydraulic Jack Plate measures 22 x 19 x 20 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mount Power Pole shallow-water anchors on this jack plate?\u003c\/strong\u003e Yes, the Bob's Machine Shop Action Series jack plate is predrilled for dual side-mount Power Pole brackets, so anchors can be added without extra drilling or fabrication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate strong enough to lift a heavy outboard?\u003c\/strong\u003e It uses a larger, more powerful motor than Bob's standard internal-pump jack plates, giving the Action Series greater lifting speed and the strength to raise heavy outboards even under full power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this jack plate manufactured?\u003c\/strong\u003e The Action Series Hydraulic Jack Plate is made in the USA at Bob's Machine Shop in Tampa, Florida.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate include the automotive-style grease nipples and tension rods Bob's Machine Shop is known for?\u003c\/strong\u003e Yes, the Action Series carries over Bob's Machine Shop's standard-series features, including automotive-style grease nipples in the side rails and tension rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Action Series and Bob's standard jack plates?\u003c\/strong\u003e The Action Series is Bob's first jack plate to house the hydraulic pump inside the jack plate structure, eliminating the need for a separately mounted boat pump, and it uses a stronger motor than other internal-pump jack plates for faster lifting of heavy outboards.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465019611,"sku":"BOB-100-106010","price":1686.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61pHOu3Z0TL.jpg?v=1785331100"},{"product_id":"bobs-machine-shop-action-series-8-inch-jack-plate-300-hp-max-part-100-108001-nopc-nospn-ng","title":"Bob's Machine Shop Action Series 8 Inch Jack Plate, 300 HP Max, Part 100-108001-NOPC-NOSPN-NG","description":"\u003cp\u003eThe Bob's Machine Shop Action Series jack plate (part 100-108001-NOPC-NOSPN-NG) is a one-piece hydraulic jack plate built to set back and raise an outboard motor rated up to 300 HP. Unlike bolt-on jack plates that rely on separate C-channels to add setback, this unit uses a single-piece housing, which simplifies rigging and reduces the number of components that can loosen or fail over time. It provides 8 inches (20 centimeters) of setback and 7.5 inches (19 centimeters) of lift, and its powerful motor can raise a heavy outboard under full power in six seconds.\u003c\/p\u003e\u003cp\u003eThe hydraulic pump is internally mounted for straightforward installation, though it can be converted to inside-the-boat mounting if the owner prefers that configuration. Plug and play wiring keeps electrical hookup simple, and the plate is predrilled for side mount shallow water anchors (sold separately). Each unit ships complete with a wiring harness, control switch, automotive grease fittings, and adjustable tension rods, so no separate hardware purchase is needed to get it rigged. Construction is metal with a silver finish, and the jack plate is backed by a limited lifetime warranty against structural defects. At 70 pounds, it is intended for boats and outboards suited to a jack plate rated at 300 HP maximum.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-108001-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Action Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 8 inches (20 centimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 7.5 inches (19 centimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 HP maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Time:\u003c\/strong\u003e 6 seconds under full power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece construction with internally mounted hydraulic pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 70 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7.99 x 16.73 x 13.78 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Wiring harness, control switch, automotive grease fittings, adjustable tension rods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime against structural defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for this jack plate?\u003c\/strong\u003e The Bob's Machine Shop Action Series jack plate, part 100-108001-NOPC-NOSPN-NG, is rated for outboards up to 300 HP maximum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback and lift does the 100-108001-NOPC-NOSPN-NG jack plate provide?\u003c\/strong\u003e It provides 8 inches (20 centimeters) of setback and 7.5 inches (19 centimeters) of lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does this jack plate raise an outboard?\u003c\/strong\u003e The internal motor can lift a heavy outboard under full power in six seconds on the Bob's Machine Shop Action Series jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bob's Machine Shop 100-108001-NOPC-NOSPN-NG jack plate?\u003c\/strong\u003e It ships with a wiring harness, control switch, automotive grease fittings, and adjustable tension rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the jack plate made from?\u003c\/strong\u003e This jack plate is constructed of metal with a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 100-108001-NOPC-NOSPN-NG jack plate weigh?\u003c\/strong\u003e The jack plate weighs 70 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this jack plate?\u003c\/strong\u003e The Action Series jack plate measures 7.99 x 16.73 x 13.78 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the hydraulic pump be mounted inside the boat instead of on the plate?\u003c\/strong\u003e Yes, the pump on the Bob's Machine Shop 100-108001-NOPC-NOSPN-NG is internally mounted by default but can be converted to an inside-the-boat mounting arrangement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate predrilled for a shallow water anchor?\u003c\/strong\u003e Yes, it is predrilled for side mount shallow water anchors, which are sold separately from the jack plate itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this one-piece jack plate differ from bolt-on jack plates?\u003c\/strong\u003e Rather than using separate C-channels bolted on to add setback, the Bob's Machine Shop Action Series jack plate uses a single-piece design, reducing the number of parts involved in the setback assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty covers this jack plate?\u003c\/strong\u003e The 100-108001-NOPC-NOSPN-NG is covered by a limited lifetime warranty against structural defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing this jack plate require extensive wiring work?\u003c\/strong\u003e No, plug and play wiring is used on this jack plate, and the included wiring harness and control switch are designed for straightforward connection.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465117915,"sku":"BOB-100-108001","price":1727.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81suKAm-cGL.jpg?v=1785331100"},{"product_id":"bobs-machine-10-inch-setback-jack-plate-300-hp-max-aluminum-100-111000-nopc-nospn-ng","title":"Bob's Machine 10 Inch Setback Jack Plate, 300 HP Max, Aluminum - 100-111000-NOPC-NOSPN-NG","description":"\u003cp\u003eThis 10 inch setback jack plate from Bob's Machine is built for outboards rated up to 300 HP, using a one-piece aluminum housing that eliminates the bolt-on C-channels found on older-style plates. The hydraulic pump is mounted internally for a cleaner install and simpler rigging, though it can be converted to an in-boat pump mount if a builder prefers that configuration. A large, powerful motor lifts a heavy outboard under full power in about six seconds, giving 7.5 inches of lift at a 10 inch setback.\u003c\/p\u003e\u003cp\u003eThe plate is predrilled for side mount shallow water anchors, which are sold separately, and wiring is plug and play for an easier connection at the helm. Included in the box are a wiring harness, a control switch, automotive grease fittings, and adjustable tension rods, so the plate arrives ready to rig without sourcing extra hardware. Construction is aluminum throughout, and the plate is backed by a limited lifetime warranty against structural defects to the original owner.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-111000-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 10 inches (25 centimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 7.5 inches (19 centimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower Rating:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10 x 16.73 x 13.78 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Height:\u003c\/strong\u003e 15 centimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece construction with internally mounted pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Wiring harness, control switch, automotive grease fittings, adjustable tension rods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010030, 818377016087\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty against structural defects, to original owner\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback and lift on the Bob's Machine 100-111000 jack plate?\u003c\/strong\u003e The 100-111000-NOPC-NOSPN-NG jack plate gives 10 inches of setback and 7.5 inches of lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower outboards can this jack plate handle?\u003c\/strong\u003e This Bob's Machine jack plate is rated for outboards up to 300 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the jack plate a bolt-on C-channel design?\u003c\/strong\u003e No, the 100-111000-NOPC-NOSPN-NG plate uses a one-piece aluminum construction, so there are no separate C-channels bolted on to add setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the hydraulic pump located?\u003c\/strong\u003e The pump on this jack plate is mounted internally within the one-piece housing, though it can be converted to an in-boat mount if a builder wants a different pump configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the jack plate made from?\u003c\/strong\u003e The Bob's Machine 100-111000 jack plate is made from aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the jack plate weigh?\u003c\/strong\u003e The 100-111000-NOPC-NOSPN-NG jack plate weighs 75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of this jack plate?\u003c\/strong\u003e The item dimensions are 10 x 16.73 x 13.78 inches, with a minimum height of 15 centimeters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the jack plate?\u003c\/strong\u003e The 100-111000-NOPC-NOSPN-NG jack plate ships with a wiring harness, control switch, automotive grease fittings, and adjustable tension rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan shallow water anchors be mounted to this plate?\u003c\/strong\u003e Yes, the jack plate is predrilled for side mount shallow water anchors, which are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the jack plate lift the outboard?\u003c\/strong\u003e The motor on the 100-111000-NOPC-NOSPN-NG plate can lift a heavy outboard under full power in about six seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the wiring difficult to install?\u003c\/strong\u003e No, the jack plate uses plug and play wiring for a straightforward connection during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this jack plate?\u003c\/strong\u003e The Bob's Machine 100-111000 jack plate carries a limited lifetime warranty against structural defects to the original owner.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465150683,"sku":"BOB-100-111000","price":1809.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81e5gq53nFL.jpg?v=1785331101"},{"product_id":"bobs-machine-10-inch-hydraulic-jack-plate-300-hp-625-lb-rating-7-5-inch-lift","title":"Bob's Machine 10 Inch Hydraulic Jack Plate - 300 HP \/ 625 lb Rating, 7.5 Inch Lift","description":"\u003cp\u003eThe Bob's Machine 10 Inch Hydraulic Jack Plate (Jackplate-Max) is a setback jack plate built to raise and lower an outboard motor under full power, letting boaters tune engine height and setback for improved performance and fuel efficiency without leaving the helm. Constructed from aircraft grade aluminum, the plate is engineered to weigh roughly one-third less than comparable jack plates while still lifting the engine under full power in 7 seconds. It provides 10 inches of setback and 7.5 inches of lift, and is rated to handle engines up to 300 horsepower (2 or 4 stroke) or up to 625 pounds. The plate uses a standard BIA bolt pattern, making it compatible with common outboard mounting configurations. Each unit ships complete with the hydraulic controls, wiring harness, hydraulic oil, and installation instructions needed to get the plate running. The plate itself weighs 47 pounds, and the full unit as shipped weighs 73 pounds. The structure is backed by a lifetime warranty, with a separate 5 year warranty covering the hydraulic pump motor. This jack plate suits boaters looking to fine-tune outboard height and setback for better hole shot, top speed, and fuel economy.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-110000-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 73 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate Weight:\u003c\/strong\u003e 47 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 10 x 16.73 x 13.78 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Speed:\u003c\/strong\u003e 7 seconds under full power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Rating:\u003c\/strong\u003e 300 horsepower, 2 or 4 stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Weight:\u003c\/strong\u003e 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e Standard BIA bolt pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aircraft grade aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Controls, wiring harness, hydraulic oil, and instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on structure, 5 year warranty on hydraulic pump motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 894721000049\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight rating of the Bob's Machine 10 Inch Hydraulic Jack Plate?\u003c\/strong\u003e This jack plate (part number 100-110000-NOPC-NOSPN-NG) is rated to 300 horsepower for 2 or 4 stroke engines, or up to 625 pounds of engine weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the jack plate itself weigh?\u003c\/strong\u003e The plate weighs 47 pounds, while the complete unit as shipped weighs 73 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the plate lift the engine?\u003c\/strong\u003e Under full power, the Bob's Machine Jackplate-Max lifts the engine in 7 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the jack plate made from?\u003c\/strong\u003e It is made from aircraft grade aluminum, which helps it weigh roughly one-third less than comparable jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback and lift does this jack plate provide?\u003c\/strong\u003e The Bob's Machine 10 Inch Hydraulic Jack Plate provides 10 inches of setback and 7.5 inches of lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bolt pattern does the jack plate use?\u003c\/strong\u003e It uses a standard BIA bolt pattern for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this jack plate?\u003c\/strong\u003e Each unit ships with the hydraulic controls, wiring harness, hydraulic oil, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Jackplate-Max?\u003c\/strong\u003e The structure carries a lifetime warranty, and the hydraulic pump motor carries a separate 5 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the jack plate?\u003c\/strong\u003e The Bob's Machine Jackplate-Max measures 10 x 16.73 x 13.78 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this jack plate be used with 2-stroke and 4-stroke outboards?\u003c\/strong\u003e Yes, the 100-110000-NOPC-NOSPN-NG jack plate is rated for both 2 stroke and 4 stroke outboards up to 300 horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these jack plates come in a package?\u003c\/strong\u003e The package quantity for this listing is 1 complete jack plate unit.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465183451,"sku":"BOB-100-110000","price":1809.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61OC2kiOc1L.jpg?v=1785331102"},{"product_id":"bobs-machine-100-112112-nopc-nospn-ng-action-series-jack-plate-12-inch-setback-300-hp-max","title":"Bob's Machine 100-112112-NOPC-NOSPN-NG Action Series Jack Plate, 12 Inch Setback, 300 HP Max","description":"\u003cp\u003eThe Bob's Machine Action Series Jack Plate is a 12 inch setback jack plate built for outboards rated up to 300 HP. It uses a one-piece design, so there are no bolt-on C-channels needed to add setback, and the hydraulic pump is internally mounted for straightforward rigging. The pump can be converted to sit inside the boat if the owner prefers that style of hydraulic setup. A large, powerful motor drives the plate and can lift a heavy outboard under full power in six seconds, providing 7.5 inches (19 cm) of lift. The plate is predrilled for side mount shallow water anchors, which are sold separately, and plug-and-play wiring makes installation straightforward. Each unit comes complete with a wiring harness, control switch, automotive grease fittings, and adjustable tension rods, so no separate hardware purchase is needed to get the plate rigged and running. Construction is backed by a limited lifetime warranty against structural defects. This jack plate suits boat owners looking to gain performance, fuel efficiency, and shallow-water capability by mounting their outboard further aft and adjusting running height on the water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-112112-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 12 inches (30 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 7.5 inches (19 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12.01 x 16.73 x 13.78 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece construction with internally mounted hydraulic pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Wiring harness, control switch, automotive grease fittings, adjustable tension rods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010047\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime against structural defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does this jack plate provide?\u003c\/strong\u003e The Bob's Machine 100-112112-NOPC-NOSPN-NG jack plate provides 12 inches (30 cm) of setback, moving the outboard further aft from the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for this jack plate?\u003c\/strong\u003e This jack plate is rated for outboards up to 300 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much lift does the jack plate offer?\u003c\/strong\u003e It provides 7.5 inches (19 cm) of lift, allowing the outboard's running height to be adjusted on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast can the plate raise a heavy outboard?\u003c\/strong\u003e The onboard motor can lift a heavy outboard under full power in six seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the hydraulic pump located on this jack plate?\u003c\/strong\u003e The 100-112112-NOPC-NOSPN-NG uses a one-piece design with the hydraulic pump internally mounted for easier rigging, though it can be converted to a pump-inside-the-boat configuration if preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the jack plate weigh?\u003c\/strong\u003e The complete unit weighs 75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the jack plate?\u003c\/strong\u003e Product dimensions are 12.01 x 16.73 x 13.78 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the jack plate?\u003c\/strong\u003e Each Bob's Machine jack plate ships with a wiring harness, control switch, automotive grease fittings, and adjustable tension rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan shallow water anchors be added to this jack plate?\u003c\/strong\u003e Yes, the plate is predrilled for side mount shallow water anchors, which are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installation require bolting on separate setback channels?\u003c\/strong\u003e No. The one-piece design of the 100-112112-NOPC-NOSPN-NG eliminates the need for bolt-on C-channels to achieve setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty coverage applies to this jack plate?\u003c\/strong\u003e It carries a limited lifetime warranty against structural defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the wiring for this jack plate easy to connect?\u003c\/strong\u003e Yes, the jack plate uses plug-and-play wiring for a straightforward electrical connection during installation.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465248987,"sku":"BOB-100-112112","price":1890.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/81spq6O0XDL.jpg?v=1785331101"},{"product_id":"bobs-machine-shop-action-series-14-inch-jack-plate","title":"Bob's Machine Shop Action Series 14 Inch Jack Plate","description":"\u003cp\u003eThe Action Series 14 Inch Jack Plate from Bob's Machine Shop is a jack plate designed for boat owners looking to adjust their outboard motor's mounting position on the transom. Jack plates of this type are used to set an outboard motor's height and setback relative to the transom, which can affect handling and performance. This unit is identified by its 14 inch size designation and is part of Bob's Machine Shop's Action Series product line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-114001-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Action Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010054\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bob's Machine Shop Action Series 14 Inch Jack Plate used for?\u003c\/strong\u003e A jack plate is used to mount an outboard motor to a boat's transom in a way that allows its height and setback to be adjusted; the Action Series 14 Inch Jack Plate from Bob's Machine Shop is sized at 14 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The Action Series 14 Inch Jack Plate weighs 85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Action Series jack plate?\u003c\/strong\u003e This jack plate is the 14 inch size within Bob's Machine Shop's Action Series line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number for this jack plate?\u003c\/strong\u003e The manufacturer part number for this Action Series jack plate is 100-114001-NOPC-NOSPN-NG.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Action Series 14 Inch Jack Plate?\u003c\/strong\u003e The UPC for this Bob's Machine Shop jack plate is 818377010054.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes this jack plate?\u003c\/strong\u003e This 14 inch jack plate is made by Bob's Machine Shop as part of its Action Series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate part of a specific product line?\u003c\/strong\u003e Yes, the Action Series 14 Inch Jack Plate is part of Bob's Machine Shop's Action Series product line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category does this product fall under?\u003c\/strong\u003e The 100-114001-NOPC-NOSPN-NG is categorized as a jack plate.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465281755,"sku":"BOB-100-114001-NOPC-NOSPN-NG","price":2135.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/i_3b46933d-5cea-471d-9690-0740c9b27637.jpg?v=1785348128"},{"product_id":"bobs-machine-shop-4-inch-hd-versa-jac-manual-jack-plate-aluminum-up-to-300-hp","title":"Bob's Machine Shop 4 Inch HD Versa Jac Manual Jack Plate - Aluminum, Up to 300 HP","description":"\u003cp\u003eThe Bob's Machine Shop 4 Inch HD Versa Jac is a manual jack plate built from high-quality, aircraft-grade aluminum, engineered for boat owners who want the option to upgrade to hydraulic operation later without replacing the whole unit. It is rated for engines up to 300 max HP and provides a 4 inch setback. Unlike competitor designs that require separate setback spacers to reach the proper setback, the Versa Jac uses a one-piece design that achieves the setback directly, simplifying installation and reducing the number of parts that can loosen or fail over time.\u003c\/p\u003e\u003cp\u003eThe plate is pre-drilled for side mount power poles, so accessories can be added without additional fabrication. Manual adjustment is handled through a screw assembly that can be operated while the boat is in the water, and automotive-style grease nipples are built in for easy lubrication of the tension rods. When an owner is ready to move to all-hydraulic operation, the manual screw assembly can be removed with a few basic hand tools and swapped for a hydraulic cylinder kit, with the pump mounted inside the boat for protection from the elements and long service life. The structure carries a limited lifetime warranty, and the hydraulic pump option (when installed) carries a 5 year warranty excluding water damage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-504100-NOPC-NOSPN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, upgradeable to hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aircraft-grade aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower Rating:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Pre-drilled for side mount power poles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on structure; 5 year warranty on hydraulic pump upgrade (excludes water damage)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the Bob's Machine Shop 4 Inch HD Versa Jac?\u003c\/strong\u003e The Versa Jac jack plate (part number 100-504100-NOPC-NOSPN) is rated for engines up to 300 max HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat setback does this jack plate provide?\u003c\/strong\u003e This Versa Jac jack plate provides a 4 inch setback in a one-piece design, rather than requiring separate setback spacers as some competing plates do.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this jack plate be adjusted while the boat is in the water?\u003c\/strong\u003e Yes, the manual screw assembly on the 4 Inch HD Versa Jac is designed to be adjusted while the boat is in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this manual jack plate be converted to hydraulic operation later?\u003c\/strong\u003e Yes, the Versa Jac's manual screw assembly can be removed with basic hand tools and replaced with a hydraulic cylinder kit and pump, which mounts inside the boat, when the owner is ready to upgrade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the jack plate made from?\u003c\/strong\u003e It is constructed from high-quality, aircraft-grade aluminum with a silver finish, giving the manual Versa Jac the same look as Bob's Machine Shop's hydraulic jack line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate pre-drilled for power pole mounting?\u003c\/strong\u003e Yes, the 100-504100-NOPC-NOSPN Versa Jac is pre-drilled for side mount power poles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The Versa Jac 4 Inch HD manual jack plate weighs 46 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this jack plate differ from other jack plates on the market?\u003c\/strong\u003e The Versa Jac uses a one-piece design to achieve its 4 inch setback, where many competing jack plates need add-on setback spacers, and it is the only jack plate in its line offering a factory upgrade path to hydraulic operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this jack plate?\u003c\/strong\u003e The 4 Inch HD Versa Jac structure carries a limited lifetime warranty; if the hydraulic pump upgrade is added, that pump carries a separate 5 year warranty that excludes water damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the tension rod lubricated on this jack plate?\u003c\/strong\u003e The Versa Jac uses automotive-style grease nipples on its tension rods for easy lubrication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this jack plate manufactured?\u003c\/strong\u003e The Bob's Machine Shop Versa Jac jack plate is made in Florida, USA.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465314523,"sku":"BOB-100-504100","price":951.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61Qo8SikgsL.jpg?v=1785331107"},{"product_id":"bobs-machine-shop-100-506000-nopc-nospn-versa-series-jack-plate-6-inch-setback-300-hp-max","title":"Bob's Machine Shop 100-506000-NOPC-NOSPN Versa Series Jack Plate, 6 Inch Setback, 300 HP Max","description":"\u003cp\u003eThe Bob's Machine Shop Versa Series Jack Plate (100-506000-NOPC-NOSPN) is a manual jack plate built for outboard-powered boats running engines up to 300 HP. It is machined from aircraft-grade aluminum in a one-piece design, so there is no need for the setback spacers that many competing jack plates require to reach the same 6 inch setback. The plate mounts between the transom and the outboard, letting the operator raise or lower engine height and adjust it while the boat is in the water to fine-tune performance, hole shot, and fuel efficiency.\u003c\/p\u003e\u003cp\u003eWhat sets the Versa Series apart is its upgrade path: it is built to be converted from manual to full hydraulic operation whenever the owner chooses. Using basic hand tools, the manual screw assembly can be removed and replaced with a hydraulic cylinder kit, with the hydraulic pump mounted inside the boat for protection from the elements and longer service life. The plate includes tension rods and automotive grease nipples for easy lubrication, and it comes pre-drilled for side-mount power poles, simplifying accessory installation. The aluminum structure carries a limited lifetime warranty, and it is made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-506000-NOPC-NOSPN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Versa Series (Versa Jac)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 22 x 19.25 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, field-upgradable to hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure Warranty:\u003c\/strong\u003e Limited lifetime\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Pump Warranty (if upgraded):\u003c\/strong\u003e 5 years, excluding water damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 894721000674\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRated for outboard engines up to 300 HP; not restricted to a specific make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on the Versa Series Jack Plate?\u003c\/strong\u003e The Bob's Machine Shop Versa Series Jack Plate (100-506000-NOPC-NOSPN) has a 6 inch setback, built as a single piece so no separate setback spacer is needed to achieve that distance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for this jack plate?\u003c\/strong\u003e This jack plate is rated for outboard engines up to 300 HP maximum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this jack plate be adjusted with the boat in the water?\u003c\/strong\u003e Yes, the Versa Series jack plate is designed to be raised or lowered while the boat is in the water, so engine height can be tuned without hauling out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate manual or hydraulic?\u003c\/strong\u003e It ships as a manual screw-operated jack plate. The Versa Series is designed so it can later be upgraded to full hydraulic operation by swapping the manual screw assembly for a hydraulic cylinder kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the jack plate made of?\u003c\/strong\u003e The 100-506000-NOPC-NOSPN Versa Series jack plate is made of aircraft-grade aluminum with a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The Bob's Machine Shop Versa Series Jack Plate weighs 63 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this jack plate?\u003c\/strong\u003e This jack plate measures 22 x 19.25 x 12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate work with side-mount power poles?\u003c\/strong\u003e Yes, the Versa Series jack plate is pre-drilled for side-mount power poles, so no additional drilling is needed for that accessory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this jack plate different from other setback jack plates?\u003c\/strong\u003e Unlike competing designs that need separate setback spacers to reach the same distance, the 100-506000-NOPC-NOSPN Versa Series jack plate uses a one-piece body to achieve its 6 inch setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this jack plate?\u003c\/strong\u003e The aluminum structure of the Versa Series Jack Plate carries a limited lifetime warranty; if later upgraded with a hydraulic pump, the pump itself carries a 5 year warranty that excludes water damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the jack plate need lubrication?\u003c\/strong\u003e Yes, it is fitted with automotive grease nipples so the moving components can be lubricated with a standard grease gun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools are needed to upgrade this jack plate to hydraulic?\u003c\/strong\u003e Converting the 100-506000-NOPC-NOSPN from manual to hydraulic only requires basic hand tools to remove the manual screw assembly and install the hydraulic cylinder kit and pump.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465347291,"sku":"BOB-100-506000","price":992.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/318ymG6KZmL.jpg?v=1785331102"},{"product_id":"bobs-machine-10-inch-setback-versa-series-manual-jack-plate-300-hp-max","title":"Bob's Machine 10 Inch Setback Versa Series Manual Jack Plate, 300 HP Max","description":"\u003cp\u003eThe Bob's Machine 10 Inch Setback Versa Series Manual Jack Plate is a manually operated jack plate built for boaters who want precise control over outboard engine height and setback without committing to a hydraulic system right away. Machined from aluminum, the plate provides a 10 inch setback and is rated for outboards up to 300 HP, with a load capacity of 615 pounds. Adjustable tension rods allow the operator to fine-tune engine positioning, helping optimize boat performance, top-end speed, and handling by letting the outboard be raised, lowered, or set back from the transom as conditions require.\u003c\/p\u003e\u003cp\u003eA key advantage of the Versa Series design is upgrade flexibility: the manual jack plate is built so that boaters can convert to a hydraulic jack plate later without replacing the entire unit, making it a practical entry point for anyone not ready for a full hydraulic setup. It is made in the USA and finished in aluminum for corrosion resistance in marine environments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-510000-NOPC-NOSPN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower Rating:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 615 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 68 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 21.5 x 19 x 17 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Feature:\u003c\/strong\u003e Adjustable tension rods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for this jack plate?\u003c\/strong\u003e The Bob's Machine 10 Inch Setback Versa Series Jack Plate is rated for outboards up to 300 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can this jack plate support?\u003c\/strong\u003e It has a load capacity of 615 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate manual or hydraulic?\u003c\/strong\u003e This is a manually operated jack plate, part of Bob's Machine's Versa Series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I upgrade to hydraulic later?\u003c\/strong\u003e Yes, the Versa Series manual jack plate is designed so it can be upgraded to a hydraulic jack plate at a later time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the jack plate made from?\u003c\/strong\u003e The jack plate is made from aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does this jack plate provide?\u003c\/strong\u003e It provides 10 inches of setback for the outboard engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Versa Series jack plate?\u003c\/strong\u003e The Bob's Machine 100-510000 jack plate measures 21.5 x 19 x 17 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The jack plate weighs 68 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs engine position adjustable on this jack plate?\u003c\/strong\u003e Yes, adjustable tension rods allow fine-tuning of the engine mounting position on this Bob's Machine jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this jack plate manufactured?\u003c\/strong\u003e The Bob's Machine 10 Inch Setback Versa Series Jack Plate is made in the USA.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465380059,"sku":"BOB-100-510000","price":1155.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51l9z9H3gQL.jpg?v=1785331079"},{"product_id":"bobs-machine-extreme-gen-3-action-series-hydraulic-jack-plate-6-inch-setback-550-hp","title":"Bob's Machine Extreme Gen 3 Action Series Hydraulic Jack Plate, 6 Inch Setback, 550+ HP","description":"\u003cp\u003eThe Bob's Machine Extreme Gen 3 Action Series Hydraulic Jack Plate is built for outboard engines of 550 horsepower and above, including V8 outboards. It is designed to improve a boat's speed, holeshot, and fuel efficiency while helping boaters navigate shallow water more confidently. Unlike jack plates that require a separate hydraulic pump mounted inside the boat, the Extreme Gen 3 has an all-in-one style pump built directly into the jack plate itself, so there are no external hoses or pump housings to rig. This integrated design makes installation significantly simpler than jack plates that rely on remote pump assemblies.\u003c\/p\u003e\u003cp\u003eThe Extreme Gen 3 is also wider than earlier Action Series designs, which allows it to accommodate Verado outboard installations without needing additional spacers. Bob's Machine engineered this jack plate to be its strongest model to date, aimed at boaters running high-horsepower V8 outboards who need a jack plate that can handle the added load and vibration those engines produce. The unit is manufactured in the USA and ships complete with the jack plate, a wiring harness, relays, and a rocker-style control switch, giving installers everything needed to get the system running.\u003c\/p\u003e\u003cp\u003eWith a 6 inch setback and a plate weight built for heavy-duty use, this jack plate suits offshore and performance boaters as well as anglers looking for the extra speed and fuel economy that proper jack plate setback and lift can provide.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-606005-NOPC-NOSPN-NG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e 550+ HP engines, including V8s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 80 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Configuration:\u003c\/strong\u003e All-in-one hydraulic pump built into the jack plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Width:\u003c\/strong\u003e Wider design permits Verado installation without spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Jack plate, wiring harness, relays, rocker style switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010184\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutboard engines rated 550 HP and above, including V8 outboards\u003c\/li\u003e\n\u003cli\u003eWider plate design accommodates Verado outboard installation without additional spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower engines is this jack plate designed for?\u003c\/strong\u003e The Bob's Machine Extreme Gen 3 Action Series Jack Plate is designed for engines of 550 horsepower and above, including V8 outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate need a separate hydraulic pump mounted in the boat?\u003c\/strong\u003e No. The Extreme Gen 3 Action Series Jack Plate has an all-in-one style pump built directly into the jack plate, so there is no separate pump or hoses to mount inside the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this jack plate work with a Verado outboard?\u003c\/strong\u003e Yes, the Extreme Gen 3 is built wider than earlier Action Series jack plates specifically so it can accommodate Verado installation without needing additional spacers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on this jack plate?\u003c\/strong\u003e This jack plate has a 6 inch setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Extreme Gen 3 jack plate weigh?\u003c\/strong\u003e The Bob's Machine Extreme Gen 3 Action Series Jack Plate weighs 80 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the jack plate?\u003c\/strong\u003e The Extreme Gen 3 Action Series Jack Plate ships complete with the jack plate itself, a wiring harness, relays, and a rocker style control switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this jack plate manufactured?\u003c\/strong\u003e The Bob's Machine Extreme Gen 3 Action Series Jack Plate is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat benefits does installing this jack plate provide?\u003c\/strong\u003e Installing the Extreme Gen 3 Action Series Jack Plate is intended to improve an outboard boat's speed, holeshot, and fuel efficiency, and to help the boat navigate shallow water more easily.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate suitable for smaller outboard motors?\u003c\/strong\u003e No, the Extreme Gen 3 Action Series Jack Plate is built specifically for 550+ HP engines, including V8 outboards, rather than smaller clamp-on motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the jack plate include a control switch for adjusting height?\u003c\/strong\u003e Yes, the Bob's Machine Extreme Gen 3 Action Series Jack Plate comes with a rocker style switch along with the wiring harness and relays needed to operate it.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465478363,"sku":"BOB-100-606005","price":1972.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/100-606005__12455.1739462853.500.750.jpg?v=1785163490"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/i_f128f9de-b482-4675-b23f-ff3a5ec6e313.jpg?v=1785359963","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trim-tilt-jack-plates-jack-plates.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}