{"title":"Power Trim Hoses, Cylinders \u0026 Seal Kits","description":null,"products":[{"product_id":"sierra-18-0342-power-trim-hose-connector-plate-gasket-replaces-mercruiser-27-476441-pkg-of-2","title":"Sierra 18-0342 Power Trim Hose Connector Plate Gasket - Replaces 27-476441, 27-47644","description":"\u003cp\u003eThe Sierra 18-0342 Power Trim Hose Connector Plate Gasket is a replacement gasket for the power trim hose connector plate on applicable MerCruiser sterndrive setups. It seals the connector plate where the power trim hydraulic hoses meet the housing, preventing hydraulic fluid seepage that can develop as the original gasket ages and loses its seal. This gasket is built to meet or exceed the specifications of the original equipment part it replaces, giving boat owners a reliable, drop-in option when servicing the power trim system during routine maintenance or when addressing a fluid leak at the connector plate.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward for anyone already accessing the power trim hose connector plate: the old gasket is removed, the mating surfaces are cleaned, and the Sierra 18-0342 is fitted in its place before the connector plate hardware is reinstalled and torqued. Because it directly replaces the OEM Mercruiser 27-476441 and 27-47644 connector plate gaskets, it restores the original seal without modification to surrounding components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0342\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Hose Connector Plate Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999873309\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e Mercruiser 27-476441, 27-47644\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercruiser 27-476441\u003c\/li\u003e\n\u003cli\u003eMercruiser 27-47644\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-0342 gasket fit?\u003c\/strong\u003e The Sierra 18-0342 is a power trim hose connector plate gasket, used where the power trim hydraulic hoses connect to the connector plate on applicable MerCruiser sterndrive units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-0342 the same as Mercruiser 27-476441?\u003c\/strong\u003e Yes, the Sierra 18-0342 is a direct replacement for the Mercruiser 27-476441 and 27-47644 connector plate gaskets, built to meet or exceed the original equipment specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-0342 gasket weigh?\u003c\/strong\u003e This gasket weighs 0.01 pounds, consistent with its small, thin construction as a single connector plate seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any special tools to install the 18-0342 gasket?\u003c\/strong\u003e No special tools are required beyond what is already needed to access the power trim hose connector plate, since the 18-0342 is a direct fit for the hardware it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-0342 an OEM or aftermarket part?\u003c\/strong\u003e It is an aftermarket gasket manufactured by Sierra that is built to meet or exceed the quality of the original equipment Mercruiser 27-476441 \/ 27-47644 gasket it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package with part 18-0342?\u003c\/strong\u003e The 18-0342 ships as the connector plate gasket itself, sized to seal the power trim hose connection at the connector plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this gasket be reused after removal?\u003c\/strong\u003e No, gaskets like the Sierra 18-0342 are designed for one-time use and should be replaced with a new gasket any time the connector plate is disassembled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the power trim hose connector plate gasket?\u003c\/strong\u003e A worn or hardened connector plate gasket can allow hydraulic fluid to seep at the connection point; installing a new Sierra 18-0342 restores the seal and stops the leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UPC 030999873309 confirm genuine Sierra packaging?\u003c\/strong\u003e Yes, UPC 030999873309 corresponds to the genuine Sierra 18-0342 Power Trim Hose Connector Plate Gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs one 18-0342 gasket enough for a complete repair?\u003c\/strong\u003e The Sierra 18-0342 is supplied as a single connector plate gasket, matching the one-piece original equipment seal it replaces.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988065464539,"sku":"SIE-18-0342","price":1.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0342_lg__59662.1558118385.500.750.jpg?v=1785188418"},{"product_id":"sierra-18-0388-power-trim-hose-connector-gasket-replaces-mercruiser-27-98823-27-988231-pkg-of-2","title":"Sierra 18-0388 Power Trim Hose Connector Gasket, Replaces Mercury Marine 27-988231 and 27-98823, Pack of 2","description":"\u003cp\u003eThe Sierra 18-0388 Power Trim Hose Connector Gasket seals the connection point on power trim hose fittings, preventing hydraulic fluid leaks at the connector joint. This gasket is sold as a pack of 2, so you have a spare on hand or enough to service both connector points in a single job. It is designed to replace Mercury Marine \/ Mercruiser 27-988231 and 27-98823 connector gaskets, making it a straightforward drop-in for anyone servicing an existing power trim hose connector rather than a new fitting design.\u003c\/p\u003e\u003cp\u003eBecause the power trim system relies on hydraulic pressure to raise and lower the outdrive, a worn or hardened gasket at the hose connector is a common source of slow trim operation or fluid seepage. Replacing this gasket restores a proper seal at the connector without needing to replace the entire hose or fitting assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-0388\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Hose Connector Gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 gaskets per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999873699\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercruiser Internal Engine Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits power trim hose connectors originally equipped with Mercury Marine \/ Mercruiser 27-988231 or 27-98823 gaskets.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e27-988231\u003c\/li\u003e\n\u003cli\u003e27-98823\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-0388 gasket fit?\u003c\/strong\u003e The Sierra 18-0388 is a power trim hose connector gasket designed to fit connectors that originally used Mercury Marine \/ Mercruiser 27-988231 or 27-98823 gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many gaskets come in a pack?\u003c\/strong\u003e Sierra part number 18-0388 is sold as a pack of 2 gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does 18-0388 replace?\u003c\/strong\u003e This gasket replaces Mercury Marine \/ Mercruiser 27-988231 and 27-98823.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this gasket weigh?\u003c\/strong\u003e Each Sierra 18-0388 power trim hose connector gasket weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM Sierra part or aftermarket?\u003c\/strong\u003e Sierra 18-0388 is a Sierra-branded replacement gasket built to match the fit and function of the original Mercury Marine \/ Mercruiser connector gaskets it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this gasket used on the boat?\u003c\/strong\u003e It is used at the power trim hose connector joint to seal the fitting against hydraulic fluid leaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace both connector gaskets at once?\u003c\/strong\u003e Since Sierra 18-0388 comes as a pack of 2, you can service both connector points on the power trim system in one job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-0388 gasket?\u003c\/strong\u003e The UPC for the Sierra 18-0388 Power Trim Hose Connector Gasket is 030999873699.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gasket stop a power trim fluid leak?\u003c\/strong\u003e A worn or hardened connector gasket is a common cause of hydraulic fluid seepage at the power trim hose fitting, and replacing it with a Sierra 18-0388 gasket restores the seal at that connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is 18-0388 listed under?\u003c\/strong\u003e Sierra 18-0388 falls under Mercruiser internal engine parts as a power trim hose connector gasket.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988072902875,"sku":"SIE-18-0388","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-0388_lg__33273.1558120191.500.750.jpg?v=1785188246"},{"product_id":"sierra-18-2054-oil-seal-replaces-honda-91253-zw1-003-mercury-26-816464-honda-outboard-gearcase","title":"Sierra 18-2054 Power Trim Oil Seal for Mercury\/Mariner Outboards - Replaces Honda 91253-ZW1-003, Mercury 26-76384, 26-816464","description":"\u003cp\u003eThe Sierra 18-2054 is a power trim oil seal engineered for Mercury\/Mariner outboard motors. It is designed to seal the power trim system, helping to keep trim\/tilt fluid contained and prevent water intrusion into the trim housing, both of which are essential to keeping the power trim and tilt mechanism operating smoothly and protected from corrosion. As a direct-fit replacement seal, it is installed during power trim service, rebuilds, or when an existing seal has begun to leak or degrade.\u003c\/p\u003e\u003cp\u003eSierra manufactures this seal to match the fit and function of the original equipment seal it replaces, making it a straightforward drop-in replacement for outboard owners and marine technicians performing trim system maintenance. It is sold as a single oil seal (Included Components: Oil Seal) and is backed by a limited warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2054\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Oil Seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Power Trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Mercury\/Mariner Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5.13 inches L x 4.0 inches W x 1.13 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999310057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00030999310057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury\/Mariner outboard motors (power trim system)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHonda 91253-ZW1-003\u003c\/li\u003e\n\u003cli\u003eMercury Marine 26-76384\u003c\/li\u003e\n\u003cli\u003eMercury Marine 26-816464\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2054 oil seal fit?\u003c\/strong\u003e The Sierra 18-2054 is a power trim oil seal designed for Mercury\/Mariner outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2054 a genuine OEM part or aftermarket?\u003c\/strong\u003e The Sierra 18-2054 is manufactured by Sierra as a replacement seal, not an original Mercury\/Mariner factory part, but it is built to match the fit and function of the OEM seal it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-2054 cross-reference to?\u003c\/strong\u003e This seal is equivalent to Honda 91253-ZW1-003 and Mercury Marine 26-76384 and 26-816464, so it can be ordered using any of those numbers as a reference for the Sierra 18-2054.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2054 oil seal weigh?\u003c\/strong\u003e The Sierra 18-2054 power trim oil seal weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the 18-2054?\u003c\/strong\u003e The Sierra 18-2054 ships in packaging measuring 5.13 inches long, 4.0 inches wide, and 1.13 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2054?\u003c\/strong\u003e One oil seal is included with each order of the Sierra 18-2054; no additional hardware or gaskets are packaged with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere on the outboard is this seal used?\u003c\/strong\u003e The Sierra 18-2054 is used in the power trim system of Mercury\/Mariner outboard motors, where it helps seal the trim\/tilt mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-2054 come with a warranty?\u003c\/strong\u003e Yes, the Sierra 18-2054 oil seal is covered by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 18-2054 as a direct replacement during trim system service?\u003c\/strong\u003e Yes, the Sierra 18-2054 is intended as a direct replacement seal for power trim service or rebuilds on applicable Mercury\/Mariner outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2054 sold individually or in a kit?\u003c\/strong\u003e The Sierra 18-2054 is sold as a single oil seal, not as part of a multi-piece kit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988091318491,"sku":"SIE-18-2054","price":10.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-2054__66268.1722513452.500.750.jpg?v=1785188766"},{"product_id":"sierra-18-2103-power-trim-hose-replaces-mercury-32-86036-pleasurecraft-ro85035-fits-mercruiser-mc-i-mc-ii-mc-iii-tr-trs-drives","title":"Sierra 18-2103 Power Trim Hose - Replaces Mercury Marine 32-86036, Fits TR\/TRS Drives 1973-93","description":"\u003cp\u003eThe Sierra 18-2103 is a power trim hose built for the hydraulic trim system on TR\/TRS drives, 1973-93, serial number 3377316 and up. This hose carries hydraulic fluid to the trim cylinders that raise and lower the outdrive, and a worn, cracked, or leaking original hose is a common cause of trim fluid loss and inconsistent trim operation. The 18-2103 is molded from rubber in white and measures 14 inches in length with a 1\/8 inch fitting size, matching the routing and connection point of the original equipment hose on the applicable drive.\u003c\/p\u003e\u003cp\u003eBecause it is a direct cross-reference to Mercury Marine 32-86036, 32-86036Q, and Pleasurecraft RO85035, it installs in place of the original hose without modification on the drives it is designed for. Weighing 0.18 pounds, it ships as a single hose ready to connect into the existing power trim plumbing. Confirm your drive model and serial number against the fitment listed below before ordering, since power trim hoses are matched closely to a specific drive generation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Trim Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.18 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282374860\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e TR\/TRS drives, 1973-93, serial number 3377316 and up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Mercury Marine 32-86036, 32-86036Q; Pleasurecraft RO85035\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTR\/TRS drives, 1973-93, serial number 3377316 and up\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury Marine 32-86036\u003c\/li\u003e\n\u003cli\u003eMercury Marine 32-86036Q\u003c\/li\u003e\n\u003cli\u003ePleasurecraft RO85035\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2103 power trim hose fit?\u003c\/strong\u003e The Sierra 18-2103 power trim hose fits TR\/TRS drives, 1973-93, with serial number 3377316 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2103 the same as Mercury Marine 32-86036?\u003c\/strong\u003e Yes, the Sierra 18-2103 cross-references directly to Mercury Marine 32-86036 and 32-86036Q, as well as Pleasurecraft RO85035.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this power trim hose?\u003c\/strong\u003e The 18-2103 power trim hose measures 14 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fitting size does the 18-2103 use?\u003c\/strong\u003e This hose has a 1\/8 inch fitting size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and color is the hose?\u003c\/strong\u003e The 18-2103 is made of white rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2103 power trim hose weigh?\u003c\/strong\u003e It weighs 0.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an OEM part or an aftermarket replacement?\u003c\/strong\u003e The Sierra 18-2103 is an aftermarket replacement hose that cross-references to Mercury Marine 32-86036, 32-86036Q, and Pleasurecraft RO85035.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2103?\u003c\/strong\u003e One power trim hose is included per order of the Sierra 18-2103.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-2103 fit drives other than TR\/TRS?\u003c\/strong\u003e The listed fitment for the Sierra 18-2103 covers TR\/TRS drives, 1973-93, serial number 3377316 and up; no other drive fitment is confirmed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2103 come with a warranty?\u003c\/strong\u003e The Sierra 18-2103 power trim hose is backed by a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my power trim hose needs replacing?\u003c\/strong\u003e A trim system that loses fluid, trims unevenly, or won't hold position often points to a cracked or leaking hose like the 18-2103 needing replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the serial number important when ordering the 18-2103?\u003c\/strong\u003e Yes, the 18-2103 is specified for TR\/TRS drives with serial number 3377316 and up, so checking your drive's serial number helps confirm fit before ordering.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988091875547,"sku":"SIE-18-2103","price":43.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2103_lg__67576.1558121043.500.750.jpg?v=1785188388"},{"product_id":"sierra-18-2106-power-trim-hose-replaces-mercruiser-32-45974-fits-mercruiser-120-140-160-drives-starboard-11-3-4-in","title":"Sierra Power Trim Hose 18-2106 - Starboard, Fits Mercruiser MCM 120-260 \u0026 Bravo","description":"\u003cp\u003eThe Sierra 18-2106 Power Trim Hose is a starboard-side power trim hose that connects to the bottom of the trim cylinder on Mercruiser MCM 120-260 and Bravo drive systems. It is built as a direct replacement for the original equipment hose, matching the original routing and connection points so the power trim system operates exactly as designed. The hose measures 11 3\/4 inches in length with a 1\/8 inch fitting size, sized to match the OEM connection at each end.\u003c\/p\u003e\u003cp\u003eBecause this is the starboard-side hose, it is designed to fit only on the starboard connection point of the trim cylinder. The port-side connector to the bottom of the trim cylinder for the same MCM 120-260 \u0026amp; Bravo application is a separate part with its own part number, so boat owners replacing both sides need to order the correct hose for each side. This hose is finished in white and is intended as a like-for-like replacement for boat owners and marine technicians servicing the power trim hydraulic circuit on qualifying Mercruiser drives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Trim Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Starboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Connector to bottom of trim cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Mercruiser MCM 120-260 \u0026amp; Bravo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 11 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 32-45974\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercruiser MCM 120-260 \u0026amp; Bravo drive systems\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e32-45974\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2106 Power Trim Hose fit?\u003c\/strong\u003e It fits Mercruiser MCM 120-260 and Bravo drive systems, connecting to the bottom of the trim cylinder on the starboard side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2106 a port or starboard hose?\u003c\/strong\u003e The 18-2106 is the starboard-side power trim hose; the port-side connector to the bottom of the trim cylinder for the same MCM 120-260 \u0026amp; Bravo application is a different part number, so be sure to order the correct side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the length of this power trim hose?\u003c\/strong\u003e The Sierra 18-2106 measures 11 3\/4 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fitting size does the 18-2106 use?\u003c\/strong\u003e Both connection points on this hose use a 1\/8 inch fitting size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the Sierra 18-2106 replace?\u003c\/strong\u003e This hose replaces OEM part number 32-45974 on applicable Mercruiser MCM 120-260 and Bravo drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-2106 Power Trim Hose?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2106 power trim hose weigh?\u003c\/strong\u003e The hose weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the 18-2106 hose connect on the drive?\u003c\/strong\u003e It connects to the bottom of the trim cylinder on Mercruiser MCM 120-260 and Bravo drive systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 18-2106 as a direct replacement for the original hose?\u003c\/strong\u003e Yes, the Sierra 18-2106 is built to replace OEM part 32-45974 as a direct, like-for-like fit on MCM 120-260 and Bravo applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2106 come with any fittings or hardware included?\u003c\/strong\u003e The 18-2106 is supplied as the hose itself, sized with a 1\/8 inch fitting connection at 11 3\/4 inches in length.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988091908315,"sku":"SIE-18-2106","price":51.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2106_lg__58617.1558121172.500.750.jpg?v=1785188925"},{"product_id":"sierra-18-2108-power-trim-hose-replaces-mercury-32-59841-fits-mercruiser-mc-i-drives-with-v-8-engines-46-x-1-8","title":"Sierra Power Trim Hose 18-2108, Replaces Mercury Marine 32-59841, Fits MC-I Drives with V-8 Engines","description":"\u003cp\u003eThe Sierra 18-2108 Power Trim Hose is a 46 inch replacement hose built for the power trim system on Mercruiser MC-I drives paired with V-8 engines. It connects the trim pump to the drive unit, carrying hydraulic fluid that raises and lowers the outdrive under power. The hose measures 46 inches in length with a 0.13 inch width and uses a 1\/8 inch fitting size, matching the original hose routing and connection points on these drives.\u003c\/p\u003e\u003cp\u003eFinished in white, the hose is sized to be a direct fit for the MC-I drive and V-8 engine combination it is designed for, and it corresponds to Mercury Marine part number 32-59841. Replacing a cracked, soft, or leaking power trim hose restores proper hydraulic pressure to the trim system, preventing slow or failed trim response and fluid loss around the pump and drive fittings. Each unit ships as a single hose ready to install in place of the original equipment line.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 46 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Length:\u003c\/strong\u003e 46 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Width:\u003c\/strong\u003e 0.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999310330\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Mercruiser MC-I drives with V-8 engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e Mercury Marine 32-59841\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercruiser MC-I drives with V-8 engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Marine 32-59841\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2108 Power Trim Hose fit?\u003c\/strong\u003e The Sierra 18-2108 is built for Mercruiser MC-I drives paired with V-8 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2108 a replacement for a Mercury Marine part?\u003c\/strong\u003e Yes, it corresponds to Mercury Marine part number 32-59841 for MC-I drives with V-8 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this power trim hose?\u003c\/strong\u003e The Sierra 18-2108 measures 46 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fitting size on the 18-2108 hose?\u003c\/strong\u003e It uses a 1\/8 inch fitting size to match the original power trim connections on MC-I drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-2108 hose?\u003c\/strong\u003e It is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2108 Power Trim Hose weigh?\u003c\/strong\u003e The hose weighs 0.31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2108?\u003c\/strong\u003e Each order includes one Sierra 18-2108 Power Trim Hose, ready to install in place of the original hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hose fit engines other than V-8?\u003c\/strong\u003e The Sierra 18-2108 is specified for MC-I drives with V-8 engines; it is not listed as fitting other engine configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat width is the 18-2108 power trim hose?\u003c\/strong\u003e The hose has a width of 0.13 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this power trim hose?\u003c\/strong\u003e A cracked, soft, or leaking power trim hose can cause slow or failed trim response and hydraulic fluid loss, so replacing the Sierra 18-2108 restores normal trim operation on MC-I drives with V-8 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2108 an OEM or aftermarket part?\u003c\/strong\u003e It is a Sierra-manufactured replacement hose that corresponds to Mercury Marine OEM part 32-59841.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988091941083,"sku":"SIE-18-2108","price":66.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2108_lg__24464.1558121290.500.750.jpg?v=1785189080"},{"product_id":"sierra-18-2114-power-trim-hose-starboard-replaces-mercury-32-99902-1-32-864960-fits-mercruiser-r-mr-alpha-one-gen-ii-bravo","title":"Sierra 18-2114 Power Trim Hose, Starboard, Replaces Mercury Marine 32-99902-1 \u0026 32-864960, Fits MCM 120-260, Bravo, Alpha One","description":"\u003cp\u003eThe Sierra 18-2114 is a starboard-side power trim hose assembly built to connect to the bottom of the power trim cylinder on applicable MerCruiser drives, matching the original trim cylinder casting number 14034-1. It is a direct equivalent to Mercury Marine OEM numbers 32-99902-1 and 32-864960, giving boat owners a reliable replacement when the original hose corrodes, cracks, or leaks trim fluid.\u003c\/p\u003e\u003cp\u003eConstructed of metal with a white finish, the assembly consists of a metal tube measuring 11 1\/2 inches paired with a 14 inch hose section and a 1\/8 inch fitting, sized to route trim fluid from the pump to the trim cylinder without modification. This hose is designed for the starboard side only; a separate Sierra part number covers the port side, so boaters should confirm which side needs replacement before ordering.\u003c\/p\u003e\u003cp\u003eThis power trim hose fits MerCruiser MCM 120-260 and Bravo drive applications, as well as R, MR, Alpha One, and Alpha One Gen II sterndrives. Replacing a worn or damaged trim hose restores proper hydraulic flow to the trim cylinder, helping maintain consistent trim and tilt response.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Starboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasting Number:\u003c\/strong\u003e 14034-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Tube Length:\u003c\/strong\u003e 11 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999310378\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMerCruiser MCM 120-260\u003c\/li\u003e\n\u003cli\u003eBravo drives\u003c\/li\u003e\n\u003cli\u003eAlpha One drives\u003c\/li\u003e\n\u003cli\u003eAlpha One Gen II drives\u003c\/li\u003e\n\u003cli\u003eR and MR drives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e32-99902-1\u003c\/li\u003e\n\u003cli\u003e32-864960\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2114 power trim hose fit?\u003c\/strong\u003e It fits MerCruiser MCM 120-260 and Bravo drive applications, as well as R, MR, Alpha One, and Alpha One Gen II sterndrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2114 hose for the port or starboard side?\u003c\/strong\u003e The Sierra 18-2114 is the starboard-side power trim hose. The port-side equivalent is a different Sierra part number, so confirm which side needs replacement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does 18-2114 replace?\u003c\/strong\u003e It replaces Mercury Marine 32-99902-1 and 32-864960.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hose and metal tube on 18-2114?\u003c\/strong\u003e The hose section measures 14 inches and the metal tube measures 11 1\/2 inches, with a 1\/8 inch fitting size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-2114 power trim hose made from?\u003c\/strong\u003e It is made of metal with a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2114 weigh?\u003c\/strong\u003e It weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does this hose connect on the trim system?\u003c\/strong\u003e The 18-2114 connects to the bottom of the trim cylinder, matching original casting number 14034-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2114 a genuine Sierra part or an aftermarket equivalent?\u003c\/strong\u003e It is a Sierra-branded replacement part manufactured as a direct equivalent to Mercury Marine 32-99902-1 and 32-864960, matching the original casting and dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when ordering part 18-2114?\u003c\/strong\u003e One complete power trim hose assembly (metal tube with attached hose), listed under UPC 030999310378.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Sierra 18-2114 and 18-2115?\u003c\/strong\u003e 18-2114 is the starboard-side power trim hose while 18-2115 is the port-side version; they are separate SKUs, so order the correct one for the side being replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2114 hose fit Bravo drives?\u003c\/strong\u003e Yes, the 18-2114 power trim hose fits Bravo drive applications along with MCM 120-260, Alpha One, Alpha One Gen II, R, and MR drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat casting number does the 18-2114 hose match?\u003c\/strong\u003e It matches trim cylinder casting number 14034-1.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092072155,"sku":"SIE-18-2114","price":51.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2114_lg__80978.1558121657.500.750.jpg?v=1785189149"},{"product_id":"power-trim-hose-32-in-replaces-mercruiser-32-59842-fits-mc-i-drives-sierra-18-2109","title":"Sierra Power Trim Hose 18-2109, 32 Inch, Replaces Mercury Marine 32-59842, Fits MC-I Drives","description":"\u003cp\u003eThe Sierra 18-2109 Power Trim Hose is a 32 inch rubber hose designed for the power trim system on MC-I drives, connecting the trim pump to the trim cylinder circuit. It is built from rubber construction in a white finish and sized with a 1\/8 inch fitting connection and a 0.13 inch outside diameter, matching the dimensions of the original equipment hose it replaces. This hose serves as a direct replacement for Mercury Marine part number 32-59842, giving boat owners and marine technicians a straightforward way to restore trim system function when the original hose has cracked, hardened, or begun to leak with age. Power trim hoses are a wear item subject to constant flexing and exposure to hydraulic fluid, heat, and saltwater environments, so periodic replacement is a normal part of maintaining reliable trim and tilt operation. At 0.15 pounds, the hose is lightweight and straightforward to install using standard hand tools, making it a practical option for a routine trim system repair or a full trim hose set replacement. It is intended for MC-I drives within the serial number range 3780850-6225576.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter:\u003c\/strong\u003e 0.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 32-59842\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMC-I drives, serial numbers 3780850-6225576\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Marine 32-59842\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2109 power trim hose fit?\u003c\/strong\u003e This hose fits MC-I drives within the serial number range 3780850-6225576, and is used in the power trim hydraulic circuit connecting the trim pump to the trim cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2109 a direct replacement for a Mercury Marine part?\u003c\/strong\u003e Yes, the 18-2109 hose replaces Mercury Marine part number 32-59842 and is built to the same length and fitting specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sierra 18-2109 power trim hose?\u003c\/strong\u003e The hose measures 32 inches in length with a 0.13 inch outside diameter and a 1\/8 inch fitting size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-2109 trim hose made from?\u003c\/strong\u003e It is made from rubber construction with a white finish, suited to withstand hydraulic fluid and marine environment exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2109 power trim hose weigh?\u003c\/strong\u003e The Sierra 18-2109 power trim hose weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this power trim hose myself?\u003c\/strong\u003e Installation involves disconnecting the old hose at its fittings and connecting the new Sierra 18-2109 in its place using standard hand tools; no specialized equipment is required for the hose swap itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace a power trim hose like the 18-2109?\u003c\/strong\u003e Power trim hoses degrade over time from constant flexing, heat, and fluid exposure, leading to cracking, hardening, or leaks, which is when a replacement hose such as the 18-2109 is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fitting size on the Sierra 18-2109 hose?\u003c\/strong\u003e The fitting size on this hose is 1\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2109 hose genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-2109 is a Sierra branded part manufactured as a replacement for the original Mercury Marine 32-59842 hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-2109 come as a single hose or a kit?\u003c\/strong\u003e The 18-2109 is sold as a single 32 inch power trim hose, not a multi-hose kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-2109 power trim hose?\u003c\/strong\u003e The hose has a white finish.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092137691,"sku":"SIE-18-2109","price":57.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2109_lg__99361.1558121350.500.750.jpg?v=1785188306"},{"product_id":"power-trim-hose-15-in-for-mercruiser-stern-drive-replaces-oem-32-99904-32-99904q-sierra-18-2116","title":"Sierra 18-2116 Power Trim Hose, 15 Inch, Replaces 32-99904 and 32-99904Q for Mercruiser Stern Drive","description":"\u003cp\u003eThe Sierra 18-2116 Power Trim Hose is a replacement hydraulic trim hose built for Mercruiser stern drive power trim systems. It carries hydraulic fluid between the trim pump and the drive unit's trim cylinders, and it is engineered to meet or exceed original equipment quality so it installs and performs like the factory hose it replaces. The hose measures 15 inches in length with a 1\/8 inch fitting size at each end, matching the dimensions of the original Mercruiser trim hose it is designed to replace.\u003c\/p\u003e\u003cp\u003eThis hose is constructed with a metal outer covering for durability under the pressure and vibration typical of a marine trim system, and it is finished in white. It is a direct cross-reference for Mercruiser part numbers 32-99904 and 32-99904Q, making it a straightforward swap for anyone repairing a leaking, cracked, or worn original hose on their Mercruiser stern drive power trim circuit. Each unit is sold individually and ships ready to install with no additional adapters required for a factory-spec fitment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2116\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/8 inch (both ends)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999237071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 32-99904, 32-99904Q\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e32-99904\u003c\/li\u003e\n\u003cli\u003e32-99904Q\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2116 Power Trim Hose fit?\u003c\/strong\u003e The Sierra 18-2116 is a power trim hose for Mercruiser stern drive trim systems, built to replace the original Mercruiser 32-99904 and 32-99904Q trim hoses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2116 the same as Mercruiser 32-99904?\u003c\/strong\u003e Yes, Sierra 18-2116 directly replaces Mercruiser part numbers 32-99904 and 32-99904Q, so it can be installed as a drop-in equivalent for either of those OEM numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the 18-2116 trim hose?\u003c\/strong\u003e This Sierra power trim hose measures 15 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size fittings does the 18-2116 hose use?\u003c\/strong\u003e The 18-2116 uses a 1\/8 inch fitting size at each end of the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 18-2116 hose made of?\u003c\/strong\u003e It has a metal construction, finished in white, designed to hold up to the pressure of a marine power trim circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2116 weigh?\u003c\/strong\u003e This trim hose weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-2116 is a genuine Sierra International part, manufactured to meet or exceed original equipment quality rather than being a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the package?\u003c\/strong\u003e Each order of the 18-2116 includes one power trim hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this hose if my old one has part number 32-99904Q instead of 32-99904?\u003c\/strong\u003e Yes, the Sierra 18-2116 covers both the 32-99904 and 32-99904Q Mercruiser part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any adapters to install the 18-2116?\u003c\/strong\u003e No additional adapters are needed; the 18-2116 is built to the same 15 inch length and 1\/8 inch fitting size as the original Mercruiser hose it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2116 trim hose?\u003c\/strong\u003e The UPC for this power trim hose is 030999237071.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092203227,"sku":"SIE-18-2116","price":45.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-2116__47415.1737830855.500.750.jpg?v=1785188389"},{"product_id":"sierra-18-2111-power-trim-hose-large-diameter-replaces-mercury-32-88006-32-45959-fits-mercury-mariner-outboard-trim-systems","title":"Sierra 18-2111 Power Trim Hose, Large Diameter, Mercury Marine Outboard Trim System, Replaces 32-88006","description":"\u003cp\u003eThe Sierra 18-2111 is a large-diameter power trim hose built for Mercury Marine outboard trim systems in which the trim pump is mounted external to the transom bracket. It carries hydraulic fluid between the trim cylinder and the connector block as part of the tilt hose circuit, and Sierra designates two of these large-diameter hoses as required per engine (paired with two small-diameter 18-2110 hoses to complete the full four-hose set: one up and one down to each cylinder).\u003c\/p\u003e\u003cp\u003eThe hose is molded in white plastic with a nominal wall thickness of 1.59 millimeters and an inside diameter of 1\/4 inch (64 millimeters), running 5 feet 7 inches (17 meters) in length. Its compact fitting footprint measures 2.52 inches by 2.52 inches. This part corresponds to Mercury Marine OEM number 32-88006, along with cross-reference numbers 32-45959 and 32-97154A1, making it a direct fit for trim systems originally equipped with those hoses.\u003c\/p\u003e\u003cp\u003eBecause trim hoses see continuous hydraulic pressure and flexing during tilt and trim operation, replacing a cracked, leaking, or swollen hose with the correctly sized 18-2111 (large diameter) helps restore proper trim function and prevents fluid loss. Be sure to distinguish this large-diameter hose from the small-diameter 18-2110, since the trim system requires both sizes and installing the wrong diameter in the wrong position will not seat correctly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity Required:\u003c\/strong\u003e 2 required per engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 1\/4 inch (64 millimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 feet 7 inches (17 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 2.52 inches L x 2.52 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 1.59 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999237064\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Marine outboard trim systems with the trim pump mounted external to the transom bracket; used as the trim cylinder to connector block tilt hose (2 required per engine)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e32-88006\u003c\/li\u003e\n\u003cli\u003e32-45959\u003c\/li\u003e\n\u003cli\u003e32-97154A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2111 power trim hose replace?\u003c\/strong\u003e The 18-2111 corresponds to Mercury Marine OEM numbers 32-88006, 32-45959, and 32-97154A1, so any of those part numbers point to this same large-diameter trim hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these hoses does a trim system need?\u003c\/strong\u003e Two of the large-diameter 18-2111 hoses are required per engine, paired with two small-diameter 18-2110 hoses to make up the full four-hose trim circuit (one up and one down to each cylinder).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-2111 and the 18-2110?\u003c\/strong\u003e The 18-2111 is the large-diameter version of Sierra's power trim hose, while the 18-2110 is the small-diameter version; a complete trim system uses two of each, so the two part numbers are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 18-2111 trim hose?\u003c\/strong\u003e It has an inside diameter of 1\/4 inch (64 millimeters) and runs 5 feet 7 inches (17 meters) long, with a nominal wall thickness of 1.59 millimeters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hose made of?\u003c\/strong\u003e The Sierra 18-2111 power trim hose is molded in white plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does this hose install in the trim system?\u003c\/strong\u003e It runs from the trim cylinder to the connector block as the tilt hose, and is used on trim systems where the trim pump is mounted external to the transom bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2111 weigh?\u003c\/strong\u003e The Sierra 18-2111 power trim hose weighs 0.59 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-2111 fit any Mercury outboard trim system?\u003c\/strong\u003e It fits Mercury Marine trim systems that use the OEM 32-88006, 32-45959, or 32-97154A1 large-diameter trim hose and that have the trim pump mounted external to the transom bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Mercury Marine part or an aftermarket replacement?\u003c\/strong\u003e The 18-2111 is a Sierra-branded replacement hose engineered to match the Mercury Marine 32-88006 trim hose and its cross-references, rather than a part sourced from Mercury Marine directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2111?\u003c\/strong\u003e Each order is for one Sierra 18-2111 large-diameter power trim hose; since two are required per engine, buyers needing a full repair should order two units of the 18-2111 plus two of the small-diameter 18-2110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-2111 hose?\u003c\/strong\u003e The 18-2111 power trim hose is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I identify the 18-2111 by its UPC?\u003c\/strong\u003e Yes, the Sierra 18-2111 large-diameter power trim hose carries UPC 030999237064.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092235995,"sku":"SIE-18-2111","price":148.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2111_lg__46083.1558121475.500.750.jpg?v=1785188019"},{"product_id":"sierra-18-2107-power-trim-hose-for-mercruiser-stern-drive-replaces-mercury-32-55816-32-in-x-1-8-in-id","title":"Sierra Power Trim Hose 18-2107, Replaces Mercury Marine 32-55816, White","description":"\u003cp\u003eThe Sierra 18-2107 Power Trim Hose is a replacement hydraulic hose for Mercruiser power trim systems, running between the trim pump and the trim cylinder assembly. It is molded from synthetic rubber to withstand contact with hydraulic trim fluid, engine-compartment heat, and the repeated flexing that occurs every time the drive is trimmed up or down. The hose is finished in white and measures 21 inches in length, making it a compact, easy-to-route replacement for a worn, cracked, or leaking original hose.\u003c\/p\u003e\u003cp\u003eThis hose is supplied as a single unit (package quantity of 1) and is manufactured in the United States. It is built as a direct equivalent to Mercury Marine part number 32-55816, so it installs in the same location and performs the same function as the original hose it replaces. Because trim hoses see constant pressure cycling and are exposed to fuel and oil vapors in the engine bay, using a synthetic rubber hose rated for this environment helps prevent premature swelling, cracking, or fluid leaks at the pump and cylinder fittings.\u003c\/p\u003e\u003cp\u003eAt 0.17 pounds, the 18-2107 is a lightweight, straightforward maintenance part suited to routine power trim system repairs where the original hose has failed or is showing signs of age.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Trim Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Synthetic Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 21 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 29.21 centimeters (L) x 19.304 centimeters (W) x 1.524 centimeters (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999310323\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercruiser power trim pump systems using Mercury Marine hose 32-55816\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Marine 32-55816\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat Mercury Marine part does the Sierra 18-2107 hose replace?\u003c\/strong\u003e The Sierra 18-2107 power trim hose is a direct equivalent to Mercury Marine part number 32-55816.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-2107 power trim hose made from?\u003c\/strong\u003e It is molded from synthetic rubber, chosen for its resistance to hydraulic trim fluid and heat in the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-2107 trim hose?\u003c\/strong\u003e This power trim hose is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sierra 18-2107 power trim hose?\u003c\/strong\u003e The hose measures 21 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2107 hose weigh?\u003c\/strong\u003e It weighs 0.17 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2107 hose connect to on the boat?\u003c\/strong\u003e It is used in Mercruiser power trim systems, running between the trim pump and the trim cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2107 an OEM or aftermarket part?\u003c\/strong\u003e It is a Sierra aftermarket hose manufactured as a direct equivalent to Mercury Marine 32-55816.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses come in the package for part 18-2107?\u003c\/strong\u003e The package contains a single hose (package quantity of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-2107 power trim hose manufactured?\u003c\/strong\u003e The hose is manufactured in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 18-2107 hose hold up to hydraulic trim fluid exposure?\u003c\/strong\u003e Yes, the synthetic rubber construction of the 18-2107 hose is intended to withstand contact with hydraulic trim fluid and the flexing that occurs during trim operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2107 power trim hose?\u003c\/strong\u003e The UPC for this hose is 030999310323.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace a power trim hose like the 18-2107?\u003c\/strong\u003e A cracked, swollen, or leaking original hose in the power trim system is the typical reason to replace it with a hose like the Sierra 18-2107.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092301531,"sku":"SIE-18-2107","price":63.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2107_lg__02283.1558121224.500.750.jpg?v=1785189053"},{"product_id":"power-trim-hose-port-for-mercruiser-32-864959-32-99903-1-fits-mcm-120-260-bravo-alpha-one-gen-ii-14-hose-1-8","title":"Sierra 18-2115 Power Trim Hose, Port Side, Replaces 32-99903-1 \u0026 32-864959, Fits MerCruiser MCM 120-260 \u0026 BRAVO","description":"\u003cp\u003eThe Sierra 18-2115 is a port-side power trim hose that connects to the bottom of the trim cylinder on applicable MerCruiser stern drive setups. It is built with a metal tube and hose assembly finished in white, designed to carry hydraulic fluid to the trim cylinder as part of the power trim system. The metal tube measures 11 1\/2 inches with a 14 inch hose length and a 1\/8 inch fitting size, matching the original equipment dimensions for the trim cylinder casting it serves (Casting #14035-1).\u003c\/p\u003e\u003cp\u003eThis hose is engineered as a direct fit replacement for the original MerCruiser trim cylinder hose, matching OEM specifications so it installs without modification. It is intended for MerCruiser MCM 120-260 and BRAVO applications, and is also referenced for R, MR, Alpha One and Gen II drive fitments. Because this is the port-side hose, it is not interchangeable with the starboard-side hose (a separate part number); confirm you are ordering the correct side before installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Connector to bottom of trim cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Cylinder Casting Number:\u003c\/strong\u003e 14035-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Tube Length:\u003c\/strong\u003e 11 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Size:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Item Length:\u003c\/strong\u003e 67 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999237194\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMerCruiser MCM 120-260 \u0026amp; BRAVO\u003c\/li\u003e\n\u003cli\u003eR, MR, Alpha One \u0026amp; Gen II drives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e32-99903-1\u003c\/li\u003e\n\u003cli\u003e32-864959\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich side does the Sierra 18-2115 power trim hose fit?\u003c\/strong\u003e The Sierra 18-2115 is the port-side power trim hose only; it connects to the bottom of the trim cylinder on the port side. The starboard-side hose is a different Sierra part number, so confirm the side needed before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-2115 replace?\u003c\/strong\u003e The Sierra 18-2115 replaces OEM numbers 32-99903-1 and 32-864959, which are associated with trim cylinder casting #14035-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines and drives does this trim hose fit?\u003c\/strong\u003e This port-side hose fits MerCruiser MCM 120-260 and BRAVO applications, and is also referenced for R, MR, Alpha One and Gen II drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose length and tube length on the 18-2115?\u003c\/strong\u003e The Sierra 18-2115 has a 14 inch hose length and an 11 1\/2 inch metal tube length, with a 1\/8 inch fitting size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-2115 power trim hose made from?\u003c\/strong\u003e It is made with a metal tube and hose assembly, finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2115 power trim hose weigh?\u003c\/strong\u003e The 18-2115 power trim hose weighs 0.09 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2115 a direct OEM replacement?\u003c\/strong\u003e Yes, the 18-2115 is built to the same specifications as the original trim cylinder hose it replaces, including matching the 14 inch hose length, 11 1\/2 inch tube length, and 1\/8 inch fitting size, so it installs in place of the OEM hose without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when ordering the Sierra 18-2115?\u003c\/strong\u003e Ordering the Sierra 18-2115 includes one port-side power trim hose assembly (metal tube and hose) with the 1\/8 inch fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2115 fit trim cylinder casting #14035-1?\u003c\/strong\u003e Yes, the Sierra 18-2115 is designed for the trim cylinder with casting #14035-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-2115 and the 18-2137 trim hose?\u003c\/strong\u003e The 18-2115 fits trim cylinder casting #14035-1 and uses OEM references 32-99903-1 and 32-864959, while the 18-2137 is a separate part fitting a different casting (#98703, 98703-1) and is approximately 11 1\/4 inches long; they are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2115?\u003c\/strong\u003e The UPC for the Sierra 18-2115 power trim hose is 030999237194.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2115 genuine Sierra or aftermarket?\u003c\/strong\u003e The 18-2115 is a genuine Sierra-branded replacement part, manufactured to meet or exceed the OEM part it replaces rather than being a used or salvaged original component.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092367067,"sku":"SIE-18-2115","price":49.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2115_lg__97114.1558121709.500.750.jpg?v=1785189093"},{"product_id":"sierra-18-2137-power-trim-hose-port-replaces-mercruiser-32-99903-32-864588-fits-r-mr-alpha-one-bravo-i-ii-iii","title":"Sierra 18-2137 Power Trim Hose, Port Side, Replaces 32-99903, Fits Alpha One \u0026 Bravo I\/II\/III","description":"\u003cp\u003eThe Sierra 18-2137 is a port-side power trim hose that connects to the bottom of the trim cylinder on MCM 120-260 and Bravo sterndrive setups. It is built for Trim Cylinder Casting #98703 and #98703-1, and is engineered to meet or exceed the original equipment part it replaces. The hose measures 14 inches in length with a metal tube portion approximately 11 1\/4 inches long, and features a machined metal fitting for a secure, leak-resistant connection into the trim system's hydraulic circuit.\u003c\/p\u003e\u003cp\u003eThis hose is designated for the port side only -- it is not interchangeable with the starboard-side hose, which carries a different part number. It fits R, MR, Alpha One, and Bravo I, II, III, X, XR, and XZ drive units. Whether you are replacing a cracked, leaking, or corroded trim hose, the 18-2137 restores proper hydraulic fluid flow to the trim cylinder so the drive tilts and trims correctly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2137\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Tube Length:\u003c\/strong\u003e Approximately 11 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Cylinder Casting Number:\u003c\/strong\u003e 98703, 98703-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999237217\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 32-99903, 32-864588\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMCM 120-260 \u0026amp; Bravo\u003c\/li\u003e\n\u003cli\u003eR, MR, Alpha One \u0026amp; Bravo I, II, III, X, XR \u0026amp; XZ\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e32-99903\u003c\/li\u003e\n\u003cli\u003e32-864588\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2137 for the port or starboard side?\u003c\/strong\u003e The Sierra 18-2137 Power Trim Hose is a port-side hose only. It connects to the bottom of the trim cylinder and is not interchangeable with a starboard-side hose, which is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2137 replace?\u003c\/strong\u003e It replaces OEM numbers 32-99903 and 32-864588, and is built to match Trim Cylinder Casting #98703 and #98703-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat drive units does this trim hose fit?\u003c\/strong\u003e The 18-2137 fits R, MR, Alpha One, and Bravo I, II, III, X, XR, and XZ drives, and is designated for use on MCM 120-260 and Bravo applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sierra 18-2137 hose?\u003c\/strong\u003e The hose itself measures 14 inches in length, with a metal tube portion of approximately 11 1\/4 inches on the 18-2137 Power Trim Hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this part weigh?\u003c\/strong\u003e The Sierra 18-2137 Power Trim Hose weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2137 a genuine OEM part or an aftermarket replacement?\u003c\/strong\u003e It is an aftermarket replacement hose engineered to meet or exceed the performance of the original 32-99903 and 32-864588 equipment it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the fitting finish on this trim hose?\u003c\/strong\u003e The metal fitting on the 18-2137 has a machined finish for a precise, secure connection at the trim cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-2137 different from the Sierra 18-2115 hose?\u003c\/strong\u003e The 18-2115 is built for Trim Cylinder Casting #14035-1 with OEM numbers 32-99903-1 and 32-864959, while the 18-2137 is built for Casting #98703\/98703-1 with OEM numbers 32-99903 and 32-864588 -- they are not the same casting fitment and are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signs indicate my trim hose needs replacement?\u003c\/strong\u003e Cracking, leaking, or corrosion in the existing hose connecting to the bottom of the trim cylinder are common reasons to replace it with a part like the Sierra 18-2137.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2137?\u003c\/strong\u003e You receive one Sierra 18-2137 Power Trim Hose assembly, consisting of the hose and its metal tube fitting for the port-side trim cylinder connection.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092399835,"sku":"SIE-18-2137","price":52.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2137_lg__49042.1558122220.500.750.jpg?v=1785189003"},{"product_id":"sierra-18-2136-power-trim-hose-starboard-replaces-mercury-32-864589-32-99902-fits-mercruiser-r-mr-alpha-one-bravo-i-ii-iii","title":"Sierra 18-2136 Starboard Power Trim Hose - Replaces Mercury Marine 32-99902, 32-864589 - Fits MerCruiser Alpha One \u0026 Bravo","description":"\u003cp\u003eThe Sierra 18-2136 Power Trim Hose is a starboard-side power trim hose designed for MerCruiser MCM 120-260 engines paired with Bravo and Alpha One stern drives. It connects to the bottom of the trim cylinder and measures approximately 11 1\/4 inches in length, matching the trim cylinder casting numbers 98704 and 98704-1. Built from metal with a white finish, this hose is engineered as a direct replacement for the original equipment hose on applicable MerCruiser sterndrive setups, fitting R, MR, Alpha One, and Bravo I, II, III, X, XR, and XZ drive configurations. Because the power trim system uses separate port and starboard hoses that route to opposite sides of the trim cylinder, installing the correct side matters -- this listing is the starboard hose only; the port-side counterpart is a different Sierra part number. The hose is intended as a like-for-like replacement for the OEM Mercury Marine hose bearing part numbers 32-99902 and 32-864589, restoring proper hydraulic fluid flow to the trim cylinder circuit. Replacing a cracked, corroded, or leaking power trim hose helps prevent hydraulic fluid loss, restores trim\/tilt responsiveness, and avoids further strain on the trim pump or cylinder. At 0.12 pounds, it is a compact, lightweight component that a marine technician or experienced boat owner can install without major disassembly beyond accessing the trim cylinder fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2136\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Starboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 11 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Tube Length:\u003c\/strong\u003e Approximately 11 1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.25 inches L x 11.25 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.12 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999237200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e R, MR, Alpha One, Bravo I, II, III, X, XR, XZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Cylinder Casting Number:\u003c\/strong\u003e 98704, 98704-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 32-99902, 32-864589\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits MerCruiser MCM 120-260 engines with R, MR, Alpha One, and Bravo I, II, III, X, XR, and XZ stern drives. Starboard side only; this hose connects to the trim cylinder bearing casting numbers 98704 and 98704-1.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eMercury Marine 32-99902, 32-864589\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2136 a port or starboard hose?\u003c\/strong\u003e The Sierra 18-2136 is the starboard power trim hose. The port-side hose that connects to the opposite side of the trim cylinder is a separate Sierra part number, so make sure you order the correct side for your installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2136 replace?\u003c\/strong\u003e It is a direct replacement for the OEM Mercury Marine power trim hose with part numbers 32-99902 and 32-864589.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat drives and engines does this power trim hose fit?\u003c\/strong\u003e The 18-2136 fits MerCruiser MCM 120-260 engines equipped with R, MR, Alpha One, or Bravo I, II, III, X, XR, or XZ stern drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sierra 18-2136 power trim hose?\u003c\/strong\u003e The hose measures approximately 11 1\/4 inches in length, with a metal tube length of approximately 11 1\/4 inches as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-2136 power trim hose made from?\u003c\/strong\u003e This power trim hose is constructed of metal with a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2136 weigh?\u003c\/strong\u003e The Sierra 18-2136 power trim hose weighs 0.12 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich trim cylinder casting numbers does this hose connect to?\u003c\/strong\u003e The 18-2136 connects to a trim cylinder bearing casting numbers 98704 and 98704-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The 18-2136 is a genuine Sierra-branded power trim hose manufactured as a direct-fit replacement for the original Mercury Marine hose, not a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2136?\u003c\/strong\u003e You receive one Sierra 18-2136 power trim hose, the complete metal hose assembly measuring approximately 11 1\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this power trim hose?\u003c\/strong\u003e A cracked, corroded, or leaking power trim hose like the 18-2136 should be replaced to prevent hydraulic fluid loss and restore proper trim and tilt operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2136 include mounting hardware or fittings?\u003c\/strong\u003e The Sierra 18-2136 is the hose assembly itself, sized to connect at the bottom of the trim cylinder on applicable MerCruiser Alpha One and Bravo drives.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092530907,"sku":"SIE-18-2136","price":53.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2136_lg__37612.1558122169.500.750.jpg?v=1785188194"},{"product_id":"sierra-18-2345-9-trim-cylinder-anchor-pin-e-ring-replaces-mercruiser-53-815949-fits-alpha-i-gen-ii-sterndrives-2-pack","title":"Sierra 18-2345-9 Trim Cylinder Anchor Pin E-Ring, Replaces Mercruiser 53-815949, For Bravo Drives, Pack of 8","description":"\u003cp\u003eThe Sierra 18-2345-9 is a trim cylinder anchor pin E-ring built to secure the anchor pin on Bravo drive trim cylinders. This small retaining ring is a wear item that keeps the anchor pin correctly positioned within the trim cylinder assembly, and replacing it when worn or corroded helps maintain proper trim cylinder function and prevents pin migration during operation.\u003c\/p\u003e\u003cp\u003eMade of metal, the E-ring is sized to snap securely into its retaining groove and is compatible with grease as a lubricant during installation. It is sold as a pack of 8, giving you enough rings on hand to service multiple trim cylinders or keep spares for future maintenance. Each Sierra part is built to meet or exceed the quality of the original equipment part it replaces, making it a reliable choice for replacing a worn or lost factory anchor pin E-ring.\u003c\/p\u003e\u003cp\u003eThis E-ring is designed for Bravo drives and directly replaces Mercruiser part number 53-815949. Because it is such a small, low-cost part, it is often replaced proactively any time the trim cylinder is removed or serviced, since reusing a worn E-ring can allow the anchor pin to work loose over time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2345-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Trim Cylinder Anchor Pin E-Ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Bravo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 53-815949\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBravo\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e53-815949 (Mercruiser)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-2345-9 used for?\u003c\/strong\u003e It is a trim cylinder anchor pin E-ring that secures the anchor pin in place on Bravo drive trim cylinders, part number 18-2345-9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2345-9 E-ring fit Alpha One drives?\u003c\/strong\u003e The Sierra 18-2345-9 is designated for Bravo drives; it is not listed for Alpha One applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-2345-9 replace?\u003c\/strong\u003e This E-ring replaces Mercruiser part number 53-815949.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many E-rings come in a pack of Sierra 18-2345-9?\u003c\/strong\u003e Sierra part 18-2345-9 is packaged 8 E-rings per pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-2345-9 anchor pin E-ring made from?\u003c\/strong\u003e The 18-2345-9 trim cylinder anchor pin E-ring is made of metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2345-9 E-ring weigh?\u003c\/strong\u003e The Sierra 18-2345-9 weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-2345-9 E-ring?\u003c\/strong\u003e Each 18-2345-9 E-ring measures approximately 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2345-9 a genuine OEM part or aftermarket?\u003c\/strong\u003e The 18-2345-9 is a Sierra aftermarket replacement part built to meet or exceed the quality of the original Mercruiser 53-815949 it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the trim cylinder anchor pin E-ring?\u003c\/strong\u003e Replace the 18-2345-9 E-ring any time it shows wear or corrosion, or proactively whenever the trim cylinder anchor pin is removed for service, since a worn E-ring can let the pin work loose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need grease to install the 18-2345-9 E-ring?\u003c\/strong\u003e The 18-2345-9 E-ring is compatible with grease, which can be used during installation to ease fitment into the retaining groove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Sierra 18-2345-9?\u003c\/strong\u003e An order of Sierra 18-2345-9 includes a pack of 8 metal trim cylinder anchor pin E-rings.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106064091,"sku":"SIE-18-2345-9","price":7.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-2345-9__41753.1739458637.500.750.jpg?v=1785188147"},{"product_id":"sierra-18-2393-trim-cylinder-pivot-pin-rear-replaces-mercruiser-17-14872-fits-r-mr-alpha-stern-drives","title":"Sierra Trim Cylinder Pivot Pin 18-2393, Rear, Replaces Mercruiser 17-14872 (R\/MR\/Alpha)","description":"\u003cp\u003eThe Sierra 18-2393 is a rear trim cylinder pivot pin engineered to ground the trim cylinder to the pivot pin shaft on Mercruiser stern drives. It is designed for the rear trim cylinder on R, MR, and Alpha drive units, positioning and securing the cylinder so the power trim and tilt system operates smoothly and reliably. Each package includes one pivot pin, finished in white. When installing this pin, it should be used with Sierra's 18-2702-1 power trim bushing (sold separately), which supports the pin in its bore and reduces wear from repeated trim cycling.\u003c\/p\u003e\u003cp\u003eThis pivot pin directly replaces Mercruiser 17-14872, so it is a straightforward drop-in for boats and stern drives originally equipped with that OEM part. Sierra manufactures its replacement parts to meet or exceed the specifications of the original equipment they replace, so buyers can expect the same fit and function as the factory pin without paying dealer OEM pricing. Note that the front trim cylinder pivot pin (Sierra 18-2394) is a different part number with different thread specifications, so be sure to order 18-2393 specifically for the rear trim cylinder application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2393\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Cylinder Pivot Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear trim cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pivot pin per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.91 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 8.75 x 10.81 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use With:\u003c\/strong\u003e Sierra 18-2702-1 power trim bushing (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross-Reference:\u003c\/strong\u003e 17-14872\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercruiser R, MR, and Alpha drive units - rear trim cylinder\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e17-14872\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2393 trim cylinder pivot pin fit?\u003c\/strong\u003e The Sierra 18-2393 is designed for the rear trim cylinder on Mercruiser R, MR, and Alpha drive units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2393 for the front or rear trim cylinder?\u003c\/strong\u003e This pin is for the rear trim cylinder. The front trim cylinder pivot pin is a separate part, Sierra 18-2394, which has a different thread specification, so make sure you order 18-2393 for a rear application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-2393 replace?\u003c\/strong\u003e Sierra 18-2393 replaces Mercruiser 17-14872, so it is a direct cross-reference for boat owners looking to replace that original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need anything else to install this pivot pin?\u003c\/strong\u003e Sierra recommends using the 18-2393 pivot pin with the Sierra 18-2702-1 power trim bushing, which is sold separately and supports the pin in its mounting bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pivot pins come in the package?\u003c\/strong\u003e Each package of the Sierra 18-2393 contains one trim cylinder pivot pin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-2393 pivot pin?\u003c\/strong\u003e The Sierra 18-2393 trim cylinder pivot pin has a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2393 pivot pin weigh?\u003c\/strong\u003e The Sierra 18-2393 trim cylinder pivot pin weighs 0.91 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 18-2393 perform as well as the original Mercruiser 17-14872 pin?\u003c\/strong\u003e Sierra engineers its replacement parts, including the 18-2393 pivot pin, to meet or exceed the specifications of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-2393 pivot pin package?\u003c\/strong\u003e The Sierra 18-2393 trim cylinder pivot pin has item dimensions of 1 x 8.75 x 10.81 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2393 pivot pin an OEM or aftermarket part?\u003c\/strong\u003e The Sierra 18-2393 is an aftermarket replacement pivot pin manufactured to replace the OEM Mercruiser 17-14872 part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Sierra 18-2393 and 18-2394?\u003c\/strong\u003e The 18-2393 is the rear trim cylinder pivot pin, while 18-2394 is the front trim cylinder pivot pin with 3\/8-24 thread; the two are separate SKUs and are not interchangeable.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106195163,"sku":"SIE-18-2393","price":40.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2393_lg__57507.1693312637.500.750.jpg?v=1785188688"},{"product_id":"sierra-18-2435-power-trim-hose-46-in-replaces-mercruiser-32-861127-fits-r-mr-alpha-one-gen-ii-bravo-i-ii-iii-s-n-0w099999-below","title":"Sierra Power Trim Hose 18-2435, Black, 46 Inch, Fits Alpha One\/Gen II\/Bravo Drives (Serial 0W099999 \u0026 Below)","description":"\u003cp\u003eThe Sierra Power Trim Hose 18-2435 is a black, 46 inch replacement hose built for the power trim system on Mercruiser sterndrive units. It routes fluid from the trim pump to the trim cylinder, and features a 90 degree hose end fitting that is designed for use with external trim lines, making it a direct fit for boats routing trim hoses along the outside of the drive rather than internally. The hose is molded from synthetic rubber for resistance to hydraulic fluid, heat, and the flexing and vibration a trim system experiences during normal operation.\u003c\/p\u003e\u003cp\u003eThis hose fits R, MR, Alpha One, and Gen II drives, and also fits Bravo drives with serial number 0W099999 and below that do not use quick connect fittings. Boats with a serial number above that threshold, or with quick connect fittings, use a different hose configuration, so confirm your drive's serial number before ordering. Note that the companion part 18-2436 uses a gray OEM hose color for the opposite trim line; the 18-2435 is specifically the black hose in the pair, so use hose color to confirm you have the correct one for your application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2435\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Synthetic Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 46 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 46 inches L x 46 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.41 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose End:\u003c\/strong\u003e 90 degree hose end fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e External trim lines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal fit for listed drives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282111632\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits R, MR, Alpha One, and Gen II drives\u003c\/li\u003e\n\u003cli\u003eAlso fits Bravo drives with serial number 0W099999 and below, without quick connect fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Marine 32-861127\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat drives does the Sierra 18-2435 power trim hose fit?\u003c\/strong\u003e The 18-2435 fits R, MR, Alpha One, and Gen II drives, and also fits Bravo drives with serial number 0W099999 and below that do not use quick connect fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-2435 hose?\u003c\/strong\u003e This hose is black. Its companion part, 18-2436, is the gray hose for the opposite trim line, so hose color is the quickest way to tell the two apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sierra 18-2435 power trim hose?\u003c\/strong\u003e It measures 46 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM equivalent of the 18-2435 power trim hose?\u003c\/strong\u003e It replaces Mercury Marine 32-861127.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-2435 trim hose made from?\u003c\/strong\u003e It is made from synthetic rubber, chosen for resistance to hydraulic fluid, heat, and the flexing a trim system sees during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2435 hose work with quick connect fittings?\u003c\/strong\u003e No. On Bravo drives, this hose is intended for serial number 0W099999 and below, which do not use quick connect fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of hose end does the 18-2435 have?\u003c\/strong\u003e It has a 90 degree hose end fitting, designed for external trim line routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2435 power trim hose weigh?\u003c\/strong\u003e It weighs 0.41 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2435 the same as the 18-2436 hose?\u003c\/strong\u003e No, they are different parts. The 18-2435 is the black hose while the 18-2436 is the gray hose, and they serve opposite sides of the trim line routing, so order by hose color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-2435?\u003c\/strong\u003e The listing includes one Sierra 18-2435 power trim hose, 46 inches long with a 90 degree hose end fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2435 a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-2435 is manufactured by Sierra as a replacement power trim hose, sold under the Sierra brand rather than as an original Mercury Marine part.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106293467,"sku":"SIE-18-2435","price":64.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2435_lg__30944.1558123522.500.750.jpg?v=1785188582"},{"product_id":"sierra-18-2436-power-trim-hose-51-in-replaces-mercruiser-32-95859-32-861128-fits-alpha-bravo-i-ii-iii-sterndrives","title":"Sierra 18-2436 Power Trim Hose, 90 Degree Hose End, Gray, Interchange 32-95859","description":"\u003cp\u003eThe Sierra 18-2436 Power Trim Hose is a gray external trim line built for the power trim\/tilt circuit on applicable Mercruiser sterndrive setups. It features a 90 degree hose end that routes the line cleanly along the engine and drive unit without kinking, keeping trim fluid delivery consistent under the pressure cycles the trim pump generates. The hose is designed for engines with serial number 0W099999 and below that do not use quick connect fittings, so it is intended as a direct fit for that earlier connection style rather than a universal or adapt-to-fit line. As an external trim line, it carries hydraulic fluid between the trim pump and the trim cylinder, and a hose that has hardened, cracked, or begun to weep fluid at the fitting is a common reason boaters replace this part before a full trim system failure occurs. Sierra manufactures this hose to meet or exceed the quality of the original equipment part it replaces, and it cross-references directly to Mallory 9-71512 and Mercruiser 32-95859 and 32-861128, so it can be ordered using any of those part numbers as well as 18-2436. Buyers should note that Sierra also sells a black-hose version of this same style hose under a different part number, so confirming the hose color that matches the existing installation helps ensure the correct part is ordered.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2436\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose End:\u003c\/strong\u003e 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 51 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.49 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282111649\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Serial number 0W099999 and below, without quick connect fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSerial number 0W099999 and below\u003c\/li\u003e\n\u003cli\u003eWithout quick connect fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMallory 9-71512\u003c\/li\u003e\n\u003cli\u003eMercruiser 32-95859\u003c\/li\u003e\n\u003cli\u003eMercruiser 32-861128\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-2436 Power Trim Hose used for?\u003c\/strong\u003e It is an external trim line that carries hydraulic fluid between the trim pump and trim cylinder on the power trim\/tilt circuit, with a 90 degree hose end for clean routing along the engine and drive unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-2436 hose?\u003c\/strong\u003e The Sierra 18-2436 is the gray-hose version of this power trim hose. Sierra also offers a black-hose equivalent under a different part number for engines that used the black hose originally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2436 fit engines with quick connect fittings?\u003c\/strong\u003e No. The 18-2436 hose is intended for serial number 0W099999 and below, which are engines without quick connect fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM or aftermarket part numbers does the 18-2436 cross-reference to?\u003c\/strong\u003e The Sierra 18-2436 Power Trim Hose is interchangeable with Mallory 9-71512 and Mercruiser 32-95859 and 32-861128, so it can be ordered under any of those numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Sierra 18-2436 power trim hose?\u003c\/strong\u003e The hose measures 51 inches in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-2436 trim hose made from?\u003c\/strong\u003e It is made from silicone, chosen for its resistance to heat and hydraulic fluid exposure in the engine bay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2436 hose weigh?\u003c\/strong\u003e The Sierra 18-2436 Power Trim Hose weighs 0.49 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2436 a genuine OEM part or an aftermarket replacement?\u003c\/strong\u003e It is a Sierra aftermarket replacement manufactured to meet or exceed the quality of the original equipment hose it replaces, not a Mercury\/Mercruiser branded OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need the 18-2436 versus another power trim hose?\u003c\/strong\u003e Match the hose color and confirm your engine's serial number falls at or below 0W099999 without quick connect fittings; the 18-2436 is specifically the gray hose for that configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2436?\u003c\/strong\u003e The order includes one Sierra 18-2436 Power Trim Hose with the 90 degree hose end already formed on the fitting side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-2436 hose be used on both port and starboard trim lines?\u003c\/strong\u003e The dossier does not specify a port or starboard designation for the 18-2436; it is described only as an external trim line with a 90 degree hose end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-2436 and Mercruiser 32-95859?\u003c\/strong\u003e Mercruiser 32-95859 is one of the OEM numbers the Sierra 18-2436 Power Trim Hose directly interchanges with, so functionally they serve the same application.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106522843,"sku":"SIE-18-2436","price":71.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2436_lg__25357.1558123590.500.750.jpg?v=1785188576"},{"product_id":"sierra-18-2461-trim-cylinder-anchor-pin-kit-replaces-mercruiser-17-44166t1-fits-bravo-i-ii-iii-drives-1988-2002","title":"Sierra 18-2461 Trim Cylinder Anchor Pin Kit, Replaces 17-44166T1, Fits Mercruiser Bravo I\/II\/III (1988-02)","description":"\u003cp\u003eThe Sierra 18-2461 Trim Cylinder Anchor Pin Kit is a direct-fit replacement anchor pin assembly for the trim cylinder mounting point on Mercruiser Bravo I, Bravo II, and Bravo III sterndrives (1988-02) with serial number 6225577 and up. The trim cylinder anchor pin secures the base of the trim cylinder to the drive bracket, and over time the original pin, bushings, and hardware can wear from constant flexing and exposure to water and salt spray. This kit supplies everything needed to renew that mounting point in one purchase.\u003c\/p\u003e\u003cp\u003eThe kit includes a stainless steel pin along with washers, nuts, rubber bushings, and end caps, giving the trim cylinder a solid, corrosion-resistant pivot point. The stainless steel pin resists rust compared to a worn or corroded original pin, and the rubber bushings help cushion movement at the anchor point during trim and tilt operation. Components have a white finish. Sierra 18-2461 replaces OEM number 17-44166T1 and is built as a like-for-like fit for the applicable Bravo drives and serial range.\u003c\/p\u003e\u003cp\u003eBuyers running R, MR, or Alpha One drives should note that the corresponding anchor pin kit for those drives (1983-90) is a separate part number, 18-2462; 18-2461 is specific to Bravo I\/II\/III drives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2461\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Cylinder Anchor Pin Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Mercruiser Bravo I\/II\/III (1988-02), Serial No. 6225577 and up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 17-44166T1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Stainless steel pin, washers, nuts, rubber bushings, end caps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282181307\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercruiser Bravo I\/II\/III (1988-02), Serial No. 6225577 and up\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e17-44166T1\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sierra 18-2461 Trim Cylinder Anchor Pin Kit?\u003c\/strong\u003e The kit includes a stainless steel pin, washers, nuts, rubber bushings, and end caps for remounting the trim cylinder anchor point on applicable Mercruiser Bravo drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does 18-2461 replace?\u003c\/strong\u003e Sierra 18-2461 replaces OEM number 17-44166T1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drives does this anchor pin kit fit?\u003c\/strong\u003e It fits Mercruiser Bravo I, Bravo II, and Bravo III drives (1988-02) with serial number 6225577 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a different kit for R, MR, or Alpha One drives?\u003c\/strong\u003e Yes, Sierra 18-2462 is the corresponding anchor pin kit for R\/MR\/Alpha One drives (1983-90); 18-2461 is specific to Bravo I\/II\/III drives, so check your drive model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anchor pin made of?\u003c\/strong\u003e The pin in the 18-2461 kit is stainless steel, paired with rubber bushings, washers, nuts, and end caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-2461 kit?\u003c\/strong\u003e The kit's components have a white finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2461 kit weigh?\u003c\/strong\u003e The Sierra 18-2461 Trim Cylinder Anchor Pin Kit weighs 1.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the components in this kit?\u003c\/strong\u003e Components in the 18-2461 kit measure 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in one 18-2461 kit?\u003c\/strong\u003e One kit (number of items: 1) contains the full set of pin, washers, nuts, bushings, and end caps needed for one anchor point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-2461 a genuine replacement part or aftermarket equivalent?\u003c\/strong\u003e Sierra 18-2461 is manufactured as a direct-fit replacement for OEM number 17-44166T1 on Mercruiser Bravo I\/II\/III drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the serial number matter when ordering this kit?\u003c\/strong\u003e Yes, the 18-2461 kit applies to Bravo I\/II\/III drives with serial number 6225577 and up.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106588379,"sku":"SIE-18-2461","price":94.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2461_lg__03663.1558124123.500.750.jpg?v=1785187988"},{"product_id":"sierra-18-2465-9-pivot-pin-end-cap-oem-19-148421-mercruiser-r-mr-alpha-one-i-ii-iii-trim-pkg-of-2","title":"Sierra 18-2465-9 Pivot Pin End Cap, Replaces 19-14842 \/ 19-148421, Mercruiser R\/MR\/Alpha One\/Bravo I\/II\/III","description":"\u003cp\u003eThe Sierra 18-2465-9 Pivot Pin End Cap is a replacement cap for the pivot pin housing on Mercruiser R, MR, Alpha, Alpha One Gen II, and Bravo stern drives. It has a 1.890 inch cap diameter and comes with seals included, so it is ready to install without sourcing separate sealing hardware. This part is sold as a package of 2 caps.\u003c\/p\u003e\u003cp\u003eFitment is specific by drive and serial number: it fits R\/MR\/Alpha One drives built in 1983-90 with Serial No. 6225577 and up, as well as I\/II\/III drives built in 1988-02 with Serial No. 6225577. It is a Mercruiser Trim System component and directly replaces Mercury OEM part numbers 19-14842 and 19-148421.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2465-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Pivot Pin End Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap Diameter:\u003c\/strong\u003e 1.890 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 caps per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercruiser Trim System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 19-14842, 19-148421\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercruiser R\/MR\/Alpha One (1983-90), Serial No. 6225577 and up\u003c\/li\u003e\n\u003cli\u003eMercruiser I\/II\/III (1988-02), Serial No. 6225577\u003c\/li\u003e\n\u003cli\u003eAlso fits R\/MR\/Alpha\/Gen II\/Bravo drives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e19-14842\u003c\/li\u003e\n\u003cli\u003e19-148421\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the Sierra 18-2465-9 pivot pin end cap replace?\u003c\/strong\u003e It replaces Mercury OEM numbers 19-14842 and 19-148421.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cap diameter on the 18-2465-9 pivot pin end cap?\u003c\/strong\u003e The cap diameter is 1.890 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pivot pin end caps come in one package of the 18-2465-9?\u003c\/strong\u003e The Sierra 18-2465-9 is sold in a package of 2 caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre seals included with the Sierra 18-2465-9 end cap?\u003c\/strong\u003e Yes, seals are included with the 18-2465-9 pivot pin end cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Mercruiser drives fit the 18-2465-9 pivot pin end cap?\u003c\/strong\u003e It fits R, MR, and Alpha One drives (1983-90) with Serial No. 6225577 and up, as well as I\/II\/III drives (1988-02) with Serial No. 6225577. It also fits R\/MR\/Alpha\/Gen II\/Bravo drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the serial number of my drive matter for fitting the 18-2465-9?\u003c\/strong\u003e Yes, the 18-2465-9 is fit for R\/MR\/Alpha One drives from Serial No. 6225577 and up, so checking your drive's serial number is necessary before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2465-9 pivot pin end cap weigh?\u003c\/strong\u003e The package weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of part is the 18-2465-9?\u003c\/strong\u003e The Sierra 18-2465-9 pivot pin end cap is categorized as a Mercruiser Trim System part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2465-9 a genuine Sierra part?\u003c\/strong\u003e Yes, the 18-2465-9 pivot pin end cap is a Sierra brand part designed as a direct replacement for Mercury OEM 19-14842 and 19-148421.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just one 18-2465-9 end cap instead of a pair?\u003c\/strong\u003e The Sierra 18-2465-9 pivot pin end cap is sold as a package of 2.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106621147,"sku":"SIE-18-2465-9","price":10.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2465-9_lg__84301.1558124430.500.750.jpg?v=1785188601"},{"product_id":"sierra-18-2464-trim-cylinder-anchor-pin-kit-for-mercruiser-alpha-one-gen-ii-replaces-17-815953t1-front-and-rear","title":"Sierra 18-2464 Front and Rear Trim Cylinder Anchor Pin Kit, Replaces 17-815953T1, Fits Alpha One Gen II","description":"\u003cp\u003eThe Sierra 18-2464 Front and Rear Anchor Pin Kit provides the hardware needed to secure the trim cylinder anchor points on All Alpha One Gen II stern drives. This kit is built around a stainless steel pin along with the washers, e-clips, bushings, and end caps required to complete a proper anchor pin installation, so a full set of wear components arrives together rather than having to be sourced piece by piece. Stainless steel construction is used for the pin to resist corrosion in the wet, salt-exposed environment around the trim system, helping the anchor points hold up over repeated trim and tilt cycles.\u003c\/p\u003e\u003cp\u003eThis kit is designed as a direct replacement for the anchor pin hardware on Alpha One Gen II drives and cross-references to the OEM part numbers listed below, making it a straightforward swap when the original pins, bushings, or end caps have worn, seized, or gone missing during service. Because the kit covers both the front and rear anchor points, it is suited for a complete anchor pin replacement in a single job rather than a partial repair. It ships as one complete kit (1 item) with all listed components included.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2464\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Front and Rear Anchor Pin Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e All Alpha One Gen II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 17-815953T1, 56-864641A24, 56-18541A75\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Stainless steel pin, washers, e-clips, bushings, end caps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10.59 x 8.35 x 1.18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAll Alpha One Gen II\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e17-815953T1\u003c\/li\u003e\n\u003cli\u003e56-864641A24\u003c\/li\u003e\n\u003cli\u003e56-18541A75\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2464 anchor pin kit fit?\u003c\/strong\u003e The Sierra 18-2464 Front and Rear Anchor Pin Kit is designed for All Alpha One Gen II stern drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does 18-2464 replace?\u003c\/strong\u003e The 18-2464 kit cross-references to OEM numbers 17-815953T1, 56-864641A24, and 56-18541A75, so it is a direct equivalent for any of those part numbers on an Alpha One Gen II drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the 18-2464 kit?\u003c\/strong\u003e This kit includes a stainless steel anchor pin along with washers, e-clips, bushings, and end caps, giving you every wear component needed to complete the anchor pin installation, packaged as one item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit cover both the front and rear anchor pins?\u003c\/strong\u003e Yes, the Sierra 18-2464 is labeled a Front and Rear Anchor Pin Kit, so it includes hardware for both anchor pin locations rather than just one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the anchor pin made from?\u003c\/strong\u003e The pin in the 18-2464 kit is made from stainless steel, chosen for corrosion resistance in the marine environment around the trim cylinder anchor points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2464 kit weigh?\u003c\/strong\u003e The Sierra 18-2464 Front and Rear Anchor Pin Kit weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of this kit?\u003c\/strong\u003e The 18-2464 kit ships in packaging measuring 10.59 x 8.35 x 1.18 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2464 a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 18-2464 is a Sierra-branded part manufactured to replace the listed OEM anchor pin hardware, sold under Sierra's own part number rather than as an OEM-branded component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the components in this kit?\u003c\/strong\u003e The components in the 18-2464 Anchor Pin Kit are white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen would I need to replace the trim cylinder anchor pins?\u003c\/strong\u003e Anchor pins, bushings, and end caps in the trim system wear over repeated trim and tilt cycles and can seize or corrode over time; the 18-2464 kit provides fresh hardware for both the front and rear anchor points when that happens on an Alpha One Gen II drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many anchor pin kits are included per package?\u003c\/strong\u003e The 18-2464 package contains one complete Front and Rear Anchor Pin Kit (1 item).\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106686683,"sku":"SIE-18-2464","price":49.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2464_lg__68141.1558124364.500.750.jpg?v=1785188911"},{"product_id":"pivot-pin-end-cap-replaces-19-815951-for-mercruiser-alpha-one-gen-ii-1991-2002-stainless-steel-pack-of-2","title":"Sierra Pivot Pin End Cap 19-815951 for MerCruiser Alpha One Gen II (1991-02), Pack of 2","description":"\u003cp\u003eThis Sierra pivot pin end cap (part number 18-2466-9) is a stainless steel replacement cap for the pivot pin assembly on MerCruiser Alpha One Gen II stern drives (1991-02), serial number OD469859 and up. It is sold as a package of 2 caps and is priced per package. The cap is machined from stainless steel for corrosion resistance in the marine environment and is a direct equivalent to Mercury Marine part number 19-815951. Use it to replace a worn, cracked, or missing pivot pin end cap during routine drive maintenance or when servicing the pivot pin assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2466-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pivot Pin End Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 19-815951\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e MerCruiser Alpha One Gen II (1991-02), Serial No. OD469859 and up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type:\u003c\/strong\u003e Pivot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 pieces (Pack of 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282187194\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMerCruiser Alpha One Gen II (1991-02), Serial No. OD469859 and up\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e19-815951\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2466-9 pivot pin end cap fit?\u003c\/strong\u003e The Sierra 18-2466-9 pivot pin end cap fits MerCruiser Alpha One Gen II stern drives (1991-02), serial number OD469859 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-2466-9 the same as Mercury Marine part 19-815951?\u003c\/strong\u003e Yes, Sierra part 18-2466-9 directly replaces Mercury Marine part number 19-815951.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many caps come in one package?\u003c\/strong\u003e Part number 18-2466-9 is sold as a package of 2 pivot pin end caps and is priced per package, not per piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pivot pin end cap made from?\u003c\/strong\u003e The 18-2466-9 end cap is made from stainless steel for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-2466-9 end cap?\u003c\/strong\u003e This pivot pin end cap is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the pivot pin end cap weigh?\u003c\/strong\u003e Each Sierra 18-2466-9 pivot pin end cap weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-2466-9 end cap?\u003c\/strong\u003e The Sierra 18-2466-9 pivot pin end cap measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this end cap work on an Alpha One Gen I drive?\u003c\/strong\u003e No, the 18-2466-9 end cap is specified for Alpha One Gen II drives, serial number OD469859 and up, not the Gen I drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e Part number 18-2466-9 is a genuine Sierra-branded pivot pin end cap manufactured as a direct replacement for Mercury Marine 19-815951.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this product?\u003c\/strong\u003e Ordering Sierra 18-2466-9 gets you one package containing 2 stainless steel pivot pin end caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the pivot pin end cap used on the drive?\u003c\/strong\u003e The 18-2466-9 end cap fits onto the pivot pin assembly on MerCruiser Alpha One Gen II drives as part of the pin retention hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2466-9 pivot pin end cap?\u003c\/strong\u003e The UPC for the Sierra 18-2466-9 pivot pin end cap package is 808282187194.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106719451,"sku":"SIE-18-2466-9","price":12.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2466-9_lg__59452.1558124499.500.750.jpg?v=1785188122"},{"product_id":"sierra-18-2463-trim-cylinder-anchor-pin-kit-replaces-mercury-17-14872a1-fits-mercruiser-r-mr-alpha-one-1983-90-pack-of-2","title":"Sierra 18-2463 Rear Trim Cylinder Anchor Pin Kit, Replaces 17-14872A1, MerCruiser R\/MR\/Alpha One 1983-90","description":"\u003cp\u003eThe Sierra 18-2463 is a rear trim cylinder anchor pin kit built for MerCruiser R, MR, and Alpha One stern drives (1983-90) with Serial No. 6225577 and up. Each kit is packaged with 2 anchor pins, giving you the correct hardware to secure the rear trim cylinder mounting points without having to source individual pins. This is a rear-specific kit -- it is not designed as a combined front-and-rear solution, so confirm your drive's serial number and application before ordering. Buyers replacing worn, corroded, or damaged anchor pins on the trim cylinder can use this kit as a direct equivalent for the OEM Mercury Marine numbers it replaces. The kit ships in white and is sold as a complete 2-pin package to cover the rear anchor points in one purchase. For MerCruiser owners who need both front and rear anchor pins together, particularly on Alpha One Gen II drives, a separate kit (18-2464) covers that broader application under a different part number -- the 18-2463 covers the rear application only.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2463\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Cylinder Anchor Pin Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2 anchor pins per kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e MerCruiser R\/MR\/Alpha One (1983-90), Serial No. 6225577 and up (Rear)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 17-14872A1, 17-99207\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.49 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Package Dimensions:\u003c\/strong\u003e 9.6 x 3.7 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282181321\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMerCruiser R\/MR\/Alpha One (1983-90)\u003c\/li\u003e\n\u003cli\u003eSerial No. 6225577 and up\u003c\/li\u003e\n\u003cli\u003eRear application only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e17-14872A1\u003c\/li\u003e\n\u003cli\u003e17-99207\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2463 kit fit?\u003c\/strong\u003e The 18-2463 is built for MerCruiser R, MR, and Alpha One stern drives (1983-90) with Serial No. 6225577 and up, and it covers the rear trim cylinder anchor pin application specifically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-2463 for the front or rear anchor pins?\u003c\/strong\u003e This kit, part number 18-2463, is a rear-only anchor pin kit -- it is not a combined front-and-rear kit, so it should not be used if you need front anchor pins as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pins come in the 18-2463 kit?\u003c\/strong\u003e The kit is packaged with 2 anchor pins, enough to cover the rear trim cylinder mounting application for one drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-2463 replace?\u003c\/strong\u003e It replaces OEM numbers 17-14872A1 and 17-99207.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 17-14872A1 the same part as Sierra 18-2463?\u003c\/strong\u003e Yes, Sierra's 18-2463 is a direct equivalent for OEM number 17-14872A1 (as well as 17-99207) in the rear trim cylinder anchor pin application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2463 anchor pin kit weigh?\u003c\/strong\u003e The kit weighs 1.49 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-2463 kit?\u003c\/strong\u003e It ships in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to know my drive's serial number before ordering this kit?\u003c\/strong\u003e Yes -- the 18-2463 is designated for units with Serial No. 6225577 and up, so confirming your MerCruiser drive's serial number helps ensure correct fitment before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-2463 and the 18-2464 kit?\u003c\/strong\u003e 18-2463 is a rear-only anchor pin kit for R\/MR\/Alpha One drives (1983-90), while 18-2464 is a front and rear anchor pin kit for All Alpha One Gen II drives -- they are different part numbers for different applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the 18-2463 kit?\u003c\/strong\u003e The 18-2463 kit's item package dimensions are 9.6 x 3.7 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2463 come with mounting hardware only, or other parts too?\u003c\/strong\u003e The 18-2463 kit includes the trim cylinder anchor pins themselves (2 per kit) for the rear application -- it is a dedicated anchor pin kit, not a broader trim cylinder repair kit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988106752219,"sku":"SIE-18-2463","price":81.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2463_lg__04133.1558124235.500.750.jpg?v=1785188469"},{"product_id":"mercruiser-power-trim-seal-kit-18-2649-replaces-oem-25-87400a2-power-trim-cylinder-seals","title":"Sierra Power Trim Seal Kit 18-2649 for Mercruiser Power Trim Cylinders","description":"\u003cp\u003eThe Sierra 18-2649 Power Trim Seal Kit provides the seals needed to rebuild a power trim cylinder on Mercruiser power trim systems. This kit is used to restore a leaking or worn trim cylinder to proper working order, addressing the loss of hydraulic pressure and trim function that occurs as cylinder seals age and wear. Rebuilding a trim cylinder with a dedicated seal kit is a cost-effective alternative to replacing the entire cylinder assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2649\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Seal Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mercruiser Power Trim Cylinders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999755827\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with Mercruiser power trim cylinders.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-2649 Power Trim Seal Kit used for?\u003c\/strong\u003e The Sierra 18-2649 is a seal kit used to rebuild a Mercruiser power trim cylinder, replacing the internal seals that wear out over time and cause the trim system to lose pressure or leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-2649 kit fit Mercruiser power trim cylinders?\u003c\/strong\u003e Yes, the Sierra 18-2649 Power Trim Seal Kit is designed for use with Mercruiser power trim cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-2649 seal kit weigh?\u003c\/strong\u003e The Sierra 18-2649 Power Trim Seal Kit weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-2649 an OEM or aftermarket part?\u003c\/strong\u003e Sierra is a marine aftermarket brand, and the 18-2649 is sold under Sierra's own part number as a replacement seal kit for Mercruiser power trim cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with this seal kit?\u003c\/strong\u003e The Sierra 18-2649 Power Trim Seal Kit carries UPC 030999755827.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the seals in a power trim cylinder?\u003c\/strong\u003e Trim cylinder seals wear and harden over time, which can cause hydraulic fluid to leak past the piston and result in a trim system that will not hold position or loses lift power; the 18-2649 kit supplies replacement seals to correct this.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I rebuild my own trim cylinder with the 18-2649 kit instead of buying a new cylinder?\u003c\/strong\u003e Yes, the Sierra 18-2649 Power Trim Seal Kit is intended to let you reseal an existing Mercruiser power trim cylinder rather than replacing the entire cylinder assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Sierra 18-2649 kit?\u003c\/strong\u003e The Sierra 18-2649 is sold as a Power Trim Seal Kit containing the seals needed for a Mercruiser power trim cylinder rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this part number 18-2649 the correct number to order?\u003c\/strong\u003e Yes, 18-2649 is the Sierra part number for this Power Trim Seal Kit and should be referenced when ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat category of boat parts does the 18-2649 seal kit belong to?\u003c\/strong\u003e The Sierra 18-2649 is categorized under Mercruiser Power Trim Cylinders.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988108325083,"sku":"SIE-18-2649","price":34.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2649_lg__79169.1558124324.500.750.jpg?v=1785329179"},{"product_id":"sierra-18-2701-9-power-trim-bushing-pack-of-8-replaces-mercruiser-23-89574-23-61290-23-45736-fits-120-260-drive-units","title":"Sierra Power Trim Bushing 18-2701-9, Pack of 8","description":"\u003cp\u003eThe Sierra Power Trim Bushing, part number 18-2701-9, is sold as a pack of 8 bushings for use in marine power trim and tilt systems. These bushings reduce friction and wear at pivot points, helping the trim and tilt mechanism move smoothly and protecting mating metal surfaces from direct wear. Each pack ships with a brushed exterior finish and is packaged to a total weight of 0.22 pounds, with package dimensions of 6.42 x 5.39 x 0.94 inches.\u003c\/p\u003e\u003cp\u003eSierra part numbering for this item follows a standard convention: the base number is priced per piece, while the -9 suffix on 18-2701-9 denotes pricing per package of 8 bushings. Buyers who need a larger quantity can reference the discount shop pack option (add -10 to the part number for a shop pack of 10), and display-packaged items are marked with a trailing D, with the plain number reserved for non-display packaging.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2701-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e Pack of 8 bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.42 x 5.39 x 0.94 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282163105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many bushings are included in the Sierra 18-2701-9 pack?\u003c\/strong\u003e Eight bushings come in each pack of Sierra part number 18-2701-9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the -9 suffix mean on part number 18-2701-9?\u003c\/strong\u003e The -9 suffix indicates the item is priced per package rather than per piece, so 18-2701-9 is the pack-of-8 version of this power trim bushing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the pack of power trim bushings weigh?\u003c\/strong\u003e The Sierra 18-2701-9 pack weighs 0.22 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for this bushing set?\u003c\/strong\u003e The package measures 6.42 x 5.39 x 0.94 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish do the bushings have?\u003c\/strong\u003e The bushings in the 18-2701-9 pack have a brushed exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order a larger shop pack of this bushing?\u003c\/strong\u003e Yes, adding a -10 suffix to the base part number is used to order a discount shop pack of 10, as an alternative to the standard 18-2701-9 pack of 8.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part?\u003c\/strong\u003e Yes, part number 18-2701-9 is a genuine Sierra power trim bushing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-2701-9 bushing pack?\u003c\/strong\u003e The UPC for this pack is 808282163105.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a power trim bushing used for?\u003c\/strong\u003e A power trim bushing like the Sierra 18-2701-9 is used at pivot points in a power trim and tilt system to reduce friction and wear as the mechanism moves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the bushings sold individually or only as a set?\u003c\/strong\u003e The Sierra 18-2701-9 is sold only as a pack of 8 bushings, not individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a display-packaged version of this bushing?\u003c\/strong\u003e Sierra part numbers ending in D are display packaged, while the plain number such as 18-2701-9 is the non-display version.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988109373659,"sku":"SIE-18-2701-9","price":56.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-2701-9__89309.1722514228.500.750.jpg?v=1785188871"},{"product_id":"sierra-18-6751-manual-release-valve-for-2-4-stroke-outboards-with-integral-tilt-and-trim-replaces-mercury-mariner-893929a01","title":"Sierra 18-6751 Manual Release Valve, Replaces Mercury 813442A2\/812843A1, Fits Outboards with Integral Tilt and Trim","description":"\u003cp\u003eThe Sierra 18-6751 is a manual release valve engineered for outboard motors equipped with integral tilt and trim systems. This valve allows the operator to manually release hydraulic pressure in the tilt and trim system, enabling the outboard to be raised or lowered by hand in the event of a power trim failure or when manual adjustment is needed, such as during towing or storage. Built with a glass-filled body and a machined exterior finish, the valve is designed to hold up to the demands of the marine environment while providing a reliable seal against hydraulic fluid.\u003c\/p\u003e\u003cp\u003eThis valve is a direct-fit replacement for a wide range of Mercury and Mariner outboard motors that use an integral tilt and trim unit, and it cross-references to several original Mercury\/Mariner part numbers, making it easy to source the correct replacement without needing to identify a supplier-specific code. It is intended for outboard owners and marine technicians performing tilt and trim system repairs or routine maintenance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6751\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Manual Release Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Package of 10, priced per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Most 2 and 4 stroke outboards with integral tilt and trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMost 2 and 4 stroke outboard motors with integral tilt and trim\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e893929A01\u003c\/li\u003e\n\u003cli\u003e813442A2\u003c\/li\u003e\n\u003cli\u003e813442A1\u003c\/li\u003e\n\u003cli\u003e811618A1\u003c\/li\u003e\n\u003cli\u003e811618\u003c\/li\u003e\n\u003cli\u003e812843A1\u003c\/li\u003e\n\u003cli\u003e99660A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6751 manual release valve do?\u003c\/strong\u003e It allows the operator to manually release hydraulic pressure in an outboard's integral tilt and trim system, so the motor can be raised or lowered by hand if the power trim is not working or when manual adjustment is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboard motors does the 18-6751 valve fit?\u003c\/strong\u003e The Sierra 18-6751 fits most 2 and 4 stroke outboard motors that use an integral tilt and trim system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the Sierra 18-6751 replace?\u003c\/strong\u003e It replaces Mercury\/Mariner part numbers 893929A01, 813442A2, 813442A1, 811618A1, 811618, 812843A1, and 99660A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6751 an original Mercury part or an aftermarket replacement?\u003c\/strong\u003e The 18-6751 is a Sierra-manufactured replacement valve built to match the fit and function of the Mercury\/Mariner OEM parts it cross-references, rather than an original Mercury-branded part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the manual release valve made from?\u003c\/strong\u003e The Sierra 18-6751 manual release valve is made from a glass-filled material with a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6751 weigh?\u003c\/strong\u003e The Sierra 18-6751 manual release valve weighs 0.02 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-6751 valve?\u003c\/strong\u003e The valve measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ports does the 18-6751 valve have?\u003c\/strong\u003e The Sierra 18-6751 has 2 ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra 18-6751 packaged?\u003c\/strong\u003e The 18-6751 is sold as a package of 10 and priced per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this valve be installed as a DIY repair?\u003c\/strong\u003e The Sierra 18-6751 is a direct-fit replacement valve for outboards with integral tilt and trim, making it suited for owners or technicians performing their own tilt and trim maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Sierra offer a warranty on the 18-6751?\u003c\/strong\u003e Sierra warrants the 18-6751 and its other parts to be free of defects in workmanship and materials for the useful life of the product, subject to Sierra's standard warranty terms.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988358082779,"sku":"SIE-18-6751","price":49.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6751__45106.1558185776.500.750.jpg?v=1785188654"},{"product_id":"tilt-trim-reservoir-for-mercury-mercruiser-oildyne-power-trim-pumps-replaces-883166a1-883166a2-4-screw-attachment-sierra-18-6778","title":"Sierra Tilt\/Trim Reservoir 18-6778, Replaces 883166A1, 883166A2, for Motors with 4 Screw Attachments","description":"\u003cp\u003eThe Sierra 18-6778 Tilt\/Trim Reservoir is a top mount reservoir designed for Oildyne power trim pumps with plastic reservoirs and tilt\/trim motors that use a 4 screw attachment mounting pattern. It serves as the fluid reservoir for the outboard or sterndrive power trim system, holding the hydraulic fluid that the trim pump circulates to raise and lower the drive unit. The reservoir is constructed of plastic with a machined exterior finish for a consistent fit against the trim motor housing.\u003c\/p\u003e\u003cp\u003eThis reservoir directly replaces 883166A1 and 883166A2, making it a straightforward swap for boat owners dealing with a cracked, leaking, or worn original reservoir. Because it is built to the 4 screw attachment configuration, it is intended for trim motors that use that specific mounting style rather than universal fitment across all trim systems. Sierra manufactures this part to meet or exceed the performance of the original equipment it replaces, and it is backed by Sierra's standard customer satisfaction warranty. Boat owners performing trim system maintenance or troubleshooting fluid loss in the power trim unit can use this reservoir as a direct component-level repair rather than replacing the entire trim motor assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6778\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tilt\/Trim Reservoir\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Top mount reservoir\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use With:\u003c\/strong\u003e Oildyne power trim pumps with plastic reservoir and tilt\/trim motors with 4 screw attachments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 7 x 6 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.78 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type Compatibility:\u003c\/strong\u003e Diesel, Gasoline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282100506\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotors with 4 screw attachments\u003c\/li\u003e\n\u003cli\u003eOildyne power trim pumps with plastic reservoir\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e883166A1\u003c\/li\u003e\n\u003cli\u003e883166A2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6778 tilt\/trim reservoir fit?\u003c\/strong\u003e The Sierra 18-6778 fits motors with 4 screw attachments and is designed for Oildyne power trim pumps that use a plastic reservoir.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does 18-6778 replace?\u003c\/strong\u003e This reservoir directly replaces OEM part numbers 883166A1 and 883166A2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6778 reservoir a genuine OEM part or aftermarket?\u003c\/strong\u003e The 18-6778 is a Sierra-manufactured aftermarket reservoir built to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-6778 tilt\/trim reservoir made of?\u003c\/strong\u003e It is made of plastic with a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-6778 reservoir?\u003c\/strong\u003e The Sierra 18-6778 measures 7 x 6 x 6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6778 tilt\/trim reservoir weigh?\u003c\/strong\u003e The 18-6778 reservoir weighs 0.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-6778 come with mounting hardware?\u003c\/strong\u003e The listing for 18-6778 covers the tilt\/trim reservoir itself; check the mounting hardware on your existing trim motor when installing it, since the reservoir is designed for motors with a 4 screw attachment pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6778 reservoir work with a bottom mount trim system?\u003c\/strong\u003e No, the 18-6778 is a top mount reservoir, so it is intended for trim motors that use a top mount configuration with 4 screw attachments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6778 reservoir covered by a warranty?\u003c\/strong\u003e Yes, the 18-6778 is covered under Sierra's customer satisfaction warranty as part of the Sierra parts line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuel types is the 18-6778 reservoir compatible with?\u003c\/strong\u003e The 18-6778 is compatible with boats running either diesel or gasoline power trim systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the tilt\/trim reservoir on my boat?\u003c\/strong\u003e A cracked, leaking, or degraded reservoir like the original 883166A1 or 883166A2 can cause trim fluid loss and inconsistent trim operation, and the Sierra 18-6778 provides a direct replacement for that reservoir.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6778 include the tilt\/trim motor as well?\u003c\/strong\u003e No, the 18-6778 is the reservoir component only, for motors with 4 screw attachments; it does not include a motor assembly.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359262427,"sku":"SIE-18-6778","price":75.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6778_lg__29425.1558131331.500.750.jpg?v=1785188406"},{"product_id":"sierra-18-6771-tilt-trim-reservoir-replaces-mercury-mercruiser-18525a1-white-universal-fit-trim-pump-fluid-tank","title":"Sierra 18-6771 Tilt\/Trim Reservoir, Replaces Mercury Marine 18525A1, 17646, White, Universal Fit","description":"\u003cp\u003eThe Sierra 18-6771 is a tilt\/trim fluid reservoir built as a direct replacement for Mercury Marine and Mercruiser tilt\/trim systems. It stores and supplies the hydraulic fluid used by the power trim pump to raise and lower the outdrive, and it is designed to meet or exceed the quality of the original equipment part it replaces. The reservoir is molded from durable plastic in white and features a tank-mount design with threaded inlet and hose\/pipe outlet connections, each sized at 0.38 inches, using NPT connectors for a secure, leak-resistant fit. This is a universal-fit reservoir, sized to fit the mounting footprint and connection style used across a range of Mercury Marine and Mercruiser trim pump assemblies. At 9.75 x 4.75 x 1 inches and 0.83 pounds, it is a straightforward, lightweight component for anyone servicing a trim system that has a cracked, leaking, or degraded original reservoir. It directly replaces Mercury Marine part numbers 18525, 18525A1, and 17646, so it drops into applications originally equipped with those reservoirs without modification. Each Sierra reservoir is manufactured to meet or exceed OEM specifications, giving boat owners and marine technicians a reliable, same-spec alternative to sourcing an increasingly hard-to-find original part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6771\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tilt\/Trim Reservoir\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9.75 x 4.75 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.83 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Type:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Connection Size:\u003c\/strong\u003e 0.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Type:\u003c\/strong\u003e Hose or Pipe Connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Connection Size:\u003c\/strong\u003e 0.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Tank Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282259501\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for tilt\/trim systems using the same reservoir mounting and connection style as the OEM numbers listed below.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e18525\u003c\/li\u003e\n\u003cli\u003e18525A1\u003c\/li\u003e\n\u003cli\u003e17646\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6771 reservoir replace?\u003c\/strong\u003e The Sierra 18-6771 is a direct replacement for Mercury Marine tilt\/trim reservoir part numbers 18525, 18525A1, and 17646.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-6771 tilt\/trim reservoir?\u003c\/strong\u003e It is molded in white plastic, matching the appearance of the original Mercury Marine reservoir it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this reservoir?\u003c\/strong\u003e The Sierra 18-6771 measures 9.75 x 4.75 x 1 inches, sized to match the mounting footprint of the OEM reservoir it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6771 weigh?\u003c\/strong\u003e This reservoir weighs 0.83 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the reservoir made from?\u003c\/strong\u003e The 18-6771 is made from plastic, designed for durability in a marine tilt\/trim fluid environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the inlet and outlet connections?\u003c\/strong\u003e Both the inlet and outlet connections on the 18-6771 are 0.38 inches, using NPT threaded fittings; the inlet is threaded and the outlet accepts a hose or pipe connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Mercury Marine part or an aftermarket replacement?\u003c\/strong\u003e The 18-6771 is a Sierra-manufactured aftermarket reservoir engineered to meet or exceed the specifications of the original Mercury Marine 18525A1, 18525, and 17646 reservoirs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6771 fit my Mercruiser trim system?\u003c\/strong\u003e It is a universal-fit reservoir intended for tilt\/trim systems that originally used Mercury Marine reservoir numbers 18525, 18525A1, or 17646.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-6771 reservoir mounted?\u003c\/strong\u003e This reservoir uses a tank-mount design consistent with the original equipment reservoir it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 18-6771?\u003c\/strong\u003e The order includes one Sierra 18-6771 tilt\/trim reservoir; it does not include the pump motor or pump assembly, which are separate parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the 18-6771 with a different pump motor, like the Sierra 18-6772?\u003c\/strong\u003e The 18-6771 reservoir is a standalone component that supplies fluid to the trim pump motor; it is a separate part number from pump motors such as the 18-6772 and pump assemblies such as the 18-6768.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988359360731,"sku":"SIE-18-6771","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/img_468ae8a7-5185-4dfa-884b-4774372d7e1c.jpg?v=1785332816"},{"product_id":"sierra-18-7044-1-service-valve-kit-for-johnson-evinrude-primer-valve-outboards-replaces-oem-437228","title":"Sierra 18-7044-1 Service Valve Kit, Replaces 437228, for Johnson\/Evinrude Outboards with Primer Valve","description":"\u003cp\u003eThe Sierra 18-7044-1 Service Valve Kit is a replacement ball valve kit for Johnson and Evinrude outboards equipped with a primer valve. It is built to restore proper primer function on the fuel system, using a chrome-finished metal ball valve with threaded inlet and outlet connections for a direct, drop-in fit. The kit includes 2 pieces and directly replaces OEM part number 437228.\u003c\/p\u003e\u003cp\u003eThis kit is designed to fit all Johnson\/Evinrude outboards that use a primer valve, with the exception of 1993 9.9 HP and 15 HP models, which use a different configuration. Because the valve is threaded on both the inlet and outlet side, installation follows the same servicing procedure as the original primer valve, making this a straightforward maintenance part for keeping the priming circuit sealed and functional. The compact, low-profile design (3.9 x 5.05 x 0.85 inches) keeps the kit close to the original OEM footprint.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7044-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 437228\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e All Johnson\/Evinrude outboards with primer valve (except 1993 9.9 HP and 15 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type:\u003c\/strong\u003e Ball Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Threaded (inlet and outlet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.9 x 5.05 x 0.85 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282378271\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eAll Johnson\/Evinrude outboards with a primer valve, except 1993 9.9 HP and 15 HP models.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e437228\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7044-1 Service Valve Kit fit?\u003c\/strong\u003e It fits all Johnson\/Evinrude outboards equipped with a primer valve, except 1993 9.9 HP and 15 HP models, which use a different valve configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does this kit replace?\u003c\/strong\u003e The 18-7044-1 Service Valve Kit replaces OEM part number 437228.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the 18-7044-1 kit?\u003c\/strong\u003e The kit includes 2 pieces, forming the complete ball valve assembly for the primer circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the valve made of?\u003c\/strong\u003e The valve body is metal with a chrome finish, matching the original primer valve construction on Johnson\/Evinrude outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 18-7044-1 valve kit?\u003c\/strong\u003e The kit measures 3.9 x 5.05 x 0.85 inches and weighs 0.05 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the inlet and outlet connections threaded?\u003c\/strong\u003e Yes, both the inlet and outlet on the 18-7044-1 Service Valve Kit use threaded connections for direct installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work on a 1993 9.9 HP or 15 HP Evinrude?\u003c\/strong\u003e No, Sierra 18-7044-1 is not designed for 1993 9.9 HP or 15 HP models; those engines require a different primer valve setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many ports does the valve have?\u003c\/strong\u003e The 18-7044-1 is a 2-port ball valve, matching the OEM primer valve layout it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The 18-7044-1 Service Valve Kit is manufactured and sold under the Sierra brand as a replacement part for the OEM 437228 primer valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-7044 and 18-7044-1 kits?\u003c\/strong\u003e The 18-7044 Service Valve Kit replaces OEM numbers 175158 and 437228, while the 18-7044-1 covers only OEM part 437228; both fit the same Johnson\/Evinrude primer valve applications, except 1993 9.9 HP and 15 HP models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the primer valve used for on these outboards?\u003c\/strong\u003e The primer valve controls fuel priming flow in the fuel system on Johnson\/Evinrude outboards, and the 18-7044-1 kit provides the replacement ball valve for that circuit when the original wears out or leaks.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988360409307,"sku":"SIE-18-7044-1","price":16.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7044_lg__00066.1558356186.500.750.jpg?v=1785189125"},{"product_id":"sierra-18-9750-0-power-trim-tilt-fluid-10-oz-replaces-omc-174275-175068-775613-universal-marine-hydraulic-fluid","title":"Sierra Power Trim and Tilt Fluid 18-9750-0, 10 Oz., Universal Fit for Marine Hydraulic Trim and Tilt Systems","description":"\u003cp\u003eSierra Power Trim and Tilt Fluid (18-9750-0) is a 10 oz. Hydraulic fluid formulated specifically for marine power trim and tilt systems that operate at high pressure. Anti-foam additives keep the fluid flowing uniformly through the hydraulic circuit, reducing air contamination that can lead to spongy or inconsistent trim and tilt operation. The formula is designed for heavy duty use at high operating pressures and holds up in applications subject to varied temperature ranges, so it performs consistently whether the boat is running in cold or warm conditions. Beyond flow and pressure performance, this fluid also provides lubrication and corrosion protection for the internal components of the hydraulic trim and tilt unit, helping guard against wear and rust in a system that is constantly exposed to moisture. It comes in a 10 oz. Size, a convenient amount for topping off a reservoir or performing a routine fluid change. This is a universal fit product, making it suitable for use across a wide range of outboard and sterndrive power trim and tilt systems that call for a compatible hydraulic trim and tilt fluid. Keep a bottle on hand for scheduled maintenance or whenever the trim and tilt reservoir needs a refill.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-9750-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim \u0026amp; Tilt Fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 oz. (283.5g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.66 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e OMC Oil \u0026amp; Filters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999969606\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for marine power trim and tilt hydraulic systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sierra Power Trim and Tilt Fluid 18-9750-0 used for?\u003c\/strong\u003e It is a hydraulic fluid designed for marine power trim and tilt systems, providing proper lubrication and corrosion protection for the internal hydraulic components while assuring uniform flow at high operating pressures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much fluid comes in one bottle of 18-9750-0?\u003c\/strong\u003e Each bottle of Sierra Power Trim and Tilt Fluid holds 10 oz. (283.5g), a convenient size for topping off a trim and tilt reservoir or completing a fluid change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fluid work with any brand of outboard or sterndrive?\u003c\/strong\u003e Yes, Sierra 18-9750-0 is a universal fit power trim and tilt fluid, meaning it is designed to be compatible across a range of marine hydraulic trim and tilt systems rather than a single make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does power trim and tilt fluid need anti-foam additives?\u003c\/strong\u003e Anti-foam additives in Sierra 18-9750-0 assure uniform flow through the hydraulic system with reduced air contamination, since trapped air or foam in the fluid can cause inconsistent or spongy trim and tilt response.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this fluid handle high operating pressure and temperature swings?\u003c\/strong\u003e Sierra Power Trim and Tilt Fluid 18-9750-0 is formulated for high operating pressure and is designed for use in applications subject to varied temperature ranges, so it holds up in both cold and warm boating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 18-9750-0 protect against corrosion inside the trim and tilt unit?\u003c\/strong\u003e Yes, it provides lubrication and corrosion protection for the internal hydraulic components of the power trim and tilt system, helping guard against wear and rust from constant moisture exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow often should power trim and tilt fluid be replaced?\u003c\/strong\u003e The product itself does not specify a service interval; check the fluid level in the trim and tilt reservoir periodically and top off or replace with Sierra 18-9750-0 as part of routine maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight is a bottle of Sierra 18-9750-0?\u003c\/strong\u003e A bottle of Sierra Power Trim and Tilt Fluid 18-9750-0 weighs 0.66 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 18-9750-0 a genuine Sierra product?\u003c\/strong\u003e Yes, Sierra Power Trim and Tilt Fluid 18-9750-0 is a genuine Sierra branded hydraulic fluid, not a generic or off-brand substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order 18-9750-0?\u003c\/strong\u003e The order includes one 10 oz. Bottle of Sierra Power Trim and Tilt Fluid, part number 18-9750-0.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988437545179,"sku":"SIE-18-9750-0","price":6.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-9750-0__05691.1739458971.500.750.jpg?v=1785188638"},{"product_id":"power-trim-cylinder-seal-kit-for-mercruiser-power-trim-cylinders-replaces-18-2649-mpn-58-08211","title":"EMP Power Trim Cylinder Seal Kit 58-08211 for Mercruiser Power Trim Cylinders","description":"\u003cp\u003eThe EMP Power Trim Cylinder Seal Kit, part number 58-08211, is built to restore hydraulic seal integrity in Mercruiser power trim cylinders. As trim cylinder seals age they harden and lose their sealing ability, letting trim fluid weep past the piston and rod and causing the drive to lose trim position or trim slowly. This kit supplies the seals needed to rebuild the cylinder and stop that leakage, returning the trim system to proper holding pressure. It is a compact, lightweight kit at just 0.031 pounds, sized for direct fitment into the trim cylinder assembly rather than a full replacement cylinder purchase. Rebuilding with a dedicated seal kit is a cost-effective way to address a leaking or soft-trimming Mercruiser power trim cylinder without replacing the entire cylinder body. Because it is manufactured to the original cylinder's seal dimensions, it installs into the existing bore and hardware during a standard cylinder rebuild.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e EMP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 58-08211\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercruiser Power Trim Cylinders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.031 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840080485096\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercruiser power trim cylinders\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the EMP 58-08211 seal kit fit?\u003c\/strong\u003e The EMP 58-08211 seal kit is designed for Mercruiser power trim cylinders, supplying the seals needed to rebuild the cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full trim cylinder or a rebuild kit?\u003c\/strong\u003e Part number 58-08211 is a seal kit for rebuilding an existing Mercruiser power trim cylinder, not a complete replacement cylinder assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the EMP 58-08211 seal kit weigh?\u003c\/strong\u003e It weighs 0.031 pounds, reflecting its compact size as a set of internal cylinder seals rather than a full hydraulic component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the seals in my power trim cylinder?\u003c\/strong\u003e Trim cylinder seals harden and wear over time, which allows trim fluid to leak past the piston and rod; installing the EMP 58-08211 kit restores the seal surfaces and stops that leakage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms indicate my Mercruiser trim cylinder needs this seal kit?\u003c\/strong\u003e A trim system that will not hold position, trims down slowly under load, or shows visible fluid seepage around the cylinder rod typically points to worn seals that the EMP 58-08211 kit addresses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing the EMP 58-08211 kit require removing the cylinder?\u003c\/strong\u003e Rebuilding a Mercruiser power trim cylinder with the 58-08211 seal kit requires disassembling the cylinder so the old seals can be removed and the new ones fitted in their place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this seal kit?\u003c\/strong\u003e The manufacturer part number is 58-08211, made by EMP for Mercruiser power trim cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the EMP 58-08211 an OEM part or an aftermarket replacement?\u003c\/strong\u003e The 58-08211 is an EMP-branded seal kit intended as a replacement for the seals used in Mercruiser power trim cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the EMP 58-08211 seal kit?\u003c\/strong\u003e The UPC for this Mercruiser power trim cylinder seal kit is 840080485096.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this seal kit stop a leaking Mercruiser trim cylinder?\u003c\/strong\u003e Yes, the EMP 58-08211 kit replaces the worn internal seals that are the typical cause of trim fluid leakage in Mercruiser power trim cylinders.\u003c\/p\u003e","brand":"EMP","offers":[{"title":"Default Title","offer_id":48991290884315,"sku":"EMP-58-08211","price":28.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/EMP_58-08211_MerCruiser_Power_Trim_Cylinder_Seal_Kit__82508.1722517473.500.750.jpg?v=1785329112"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/EMP_58-08211_MerCruiser_Power_Trim_Cylinder_Seal_Kit__82508.1722517473.500.750.jpg?v=1785356546","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trim-tilt-jack-plates-tilt-trim-motors-hydraulics-power-trim-hoses-cylinders-seal-kits.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}