{"title":"Trim Position Senders \u0026 Gauges","description":null,"products":[{"product_id":"sierra-18-7634-trim-sender-for-omc-cobra-sterndrive-replaces-omc-984748","title":"Sierra 18-7634 Trim Sender for OMC Cobra Drives, Replaces 984748, White","description":"\u003cp\u003eThe Sierra 18-7634 Trim Sender is a replacement trim position sender built for OMC Cobra drives. It reports drive trim\/tilt position to the gauge so the operator can monitor drive angle accurately, and it is a direct replacement for the original OMC trim sender used on Cobra drive systems. The housing has a machined exterior and a white finish, and the unit is compact enough to install in the same location as the original sender it replaces.\u003c\/p\u003e\u003cp\u003eThis trim sender is designed as a like-for-like swap: it replaces OMC part number 984748, so it restores factory trim gauge function without modifying wiring or gauge components. It is intended for OMC Cobra drives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7634\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trim Sender\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e OMC Cobra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.3 x 3.25 x 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282265144\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOMC Cobra\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e984748\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-7634 trim sender fit?\u003c\/strong\u003e The Sierra 18-7634 trim sender is designed to fit OMC Cobra drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the 18-7634 replace?\u003c\/strong\u003e It replaces OMC part number 984748, making it a direct swap for the original Cobra drive trim sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-7634 trim sender?\u003c\/strong\u003e The Sierra 18-7634 has a white finish with a machined exterior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7634 trim sender weigh?\u003c\/strong\u003e The Sierra 18-7634 weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-7634 trim sender?\u003c\/strong\u003e It measures 0.3 x 3.25 x 3.25 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-7634 a genuine OMC part or an aftermarket replacement?\u003c\/strong\u003e The 18-7634 is a Sierra-brand replacement part designed to replace OMC number 984748 on Cobra drives, not an original OMC-branded unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7634 work on other OMC drive systems besides Cobra?\u003c\/strong\u003e The 18-7634 is designated for OMC Cobra drives; fitment on other OMC drive systems is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-7634 trim sender?\u003c\/strong\u003e The UPC for the Sierra 18-7634 trim sender is 808282265144.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim sender come with mounting hardware?\u003c\/strong\u003e The listing covers the Sierra 18-7634 trim sender unit itself; no additional included hardware is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the exterior finish of the 18-7634 trim sender?\u003c\/strong\u003e The Sierra 18-7634 has a machined exterior finish.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988385771739,"sku":"SIE-18-7634","price":183.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-7634_lg__87185.1558131029.500.750.jpg?v=1785188630"},{"product_id":"trim-sender-limit-kit-for-mercruiser-alpha-alpha-gen-ii-bravo-mc-i-r-mr-drives-replaces-805320a1-88678a5-sierra-18-7633","title":"Sierra 18-7633 Trim Sender\/Limit Kit, Replaces 96863A15, for MC-I, R, MR, Alpha, Alpha Gen II, Bravo Drives","description":"\u003cp\u003eThe Sierra 18-7633 Trim Sender\/Limit Kit is a replacement trim position sensor and limit switch assembly built for MC-I, R, MR, Alpha, Alpha Gen II, and Bravo stern drives. This kit monitors and signals drive trim position, allowing the helm gauge to display accurate up\/down trim range and helping prevent over-trimming the outdrive. It is built from aluminum for durability in the marine engine environment and uses a 12 volt panel mount design with a push button output type, matching the original equipment configuration on covered Mercruiser stern drives.\u003c\/p\u003e\u003cp\u003eAs a direct replacement, the 18-7633 restores accurate trim feedback when an original sender has failed, drifted out of calibration, or corroded. Sierra states that each of its products meets or exceeds the original equipment part it replaces, making this kit a straightforward swap for the OEM sender on applicable Alpha One and Bravo drive setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-7633\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Sender\/Limit Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Supply Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Type:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282228774\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00808282228774\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Drives:\u003c\/strong\u003e MC-I, R, MR, Alpha, Alpha Gen II, Bravo\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to fit MC-I, R, MR, Alpha, Alpha Gen II, and Bravo stern drives.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e96863A15\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat drives does the Sierra 18-7633 Trim Sender\/Limit Kit fit?\u003c\/strong\u003e The 18-7633 is designed to fit MC-I, R, MR, Alpha, Alpha Gen II, and Bravo stern drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-7633 a direct replacement for OEM part 96863A15?\u003c\/strong\u003e Yes, Sierra 18-7633 replaces OEM number 96863A15 and is built to meet or exceed the performance of the original equipment part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 18-7633 trim sender made from?\u003c\/strong\u003e This trim sender\/limit kit is constructed from aluminum for durability in a marine engine compartment environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 18-7633 trim sender run on?\u003c\/strong\u003e The Sierra 18-7633 operates on a 12 volt supply, matching standard marine electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra 18-7633 mounted?\u003c\/strong\u003e It uses a panel mount design with a push button output type, the same configuration as the original equipment sender it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-7633 Trim Sender\/Limit Kit weigh?\u003c\/strong\u003e The Sierra 18-7633 kit weighs 0.65 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-7633 work on an Alpha One outdrive?\u003c\/strong\u003e Yes, the kit is listed to fit Alpha and Alpha Gen II drives, along with MC-I, R, MR, and Bravo drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Sierra 18-7633 a genuine Sierra part or a generic aftermarket sender?\u003c\/strong\u003e It is a genuine Sierra-branded trim sender\/limit kit, part number 18-7633, engineered to meet or exceed the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the trim sender in this kit actually do?\u003c\/strong\u003e The sender in the Sierra 18-7633 kit signals drive trim position to the helm so the trim gauge and limit function read accurately across the drive's trim range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color or finish does the 18-7633 come in?\u003c\/strong\u003e The Sierra 18-7633 is finished in aluminum with a classic style housing.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988386001115,"sku":"SIE-18-7633","price":112.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-7633__56023.1722480511.500.750.jpg?v=1785189125"},{"product_id":"sierra-57905p-amega-2-domed-marine-trim-gauge-up-down-fits-mercury-mariner-mercruiser-omc-cobra-volvo-penta-dp-sx-yamaha-2001-on","title":"Sierra 57905P Amega 2 Inch Trim Gauge for Mercury, Mariner, Force, Cobra, Volvo DP\/SX, Yamaha 2001 and Up","description":"\u003cp\u003eThe Sierra 57905P is a 2 inch Amega Domed Series trim gauge built to show UP-DOWN trim position on compatible outboard and sterndrive engines. It fits Mercury outboard and inboard\/outboard engines, Mariner, Force, Cobra, Volvo Penta DP and SX drives, and Yamaha outboards 2001 and up. The sender code is BY ENG. MFR, meaning the gauge reads off the engine manufacturer's existing trim sender and does not require a separate sender purchase.\u003c\/p\u003e\u003cp\u003eThe gauge face uses a black dial with red graduations, white numerals, and a vivid white pointer staff for clear visibility at a glance. A scratch resistant curved glass lens sits within black near-flush bezels, and the gauge is illuminated with both perimeter and thru-dial lighting for nighttime use. Current draw is low, at 0.10 to 0.15 amps, so it places minimal load on the boat's electrical system. The bezel measures 2.39 inches in outer diameter, the housing outer diameter is 2.08 inches, and the mounting hole size is 2.13 inches, matching standard 2 inch dash cutouts. It is rated for operation from -40C to 70C. Optional add-on eyebrow or square bezels are available separately for buyers who want a different dash appearance.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 57905P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trim Amega 2 Merc\/Volvo Dp\/Sx Yam01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Range:\u003c\/strong\u003e UP-DOWN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Code:\u003c\/strong\u003e BY ENG. MFR (no separate sender required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Outer Diameter:\u003c\/strong\u003e 2.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Outer Diameter:\u003c\/strong\u003e 2.08 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 2.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 0.10 to 0.15 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40C to 70C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Color:\u003c\/strong\u003e Black dial, red graduations, white numerals, white pointer staff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Finish:\u003c\/strong\u003e Polished, black near-flush bezels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Perimeter and thru-dial lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass lens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957420022\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury outboard and inboard\/outboard engines\u003c\/li\u003e\n\u003cli\u003eMariner\u003c\/li\u003e\n\u003cli\u003eForce\u003c\/li\u003e\n\u003cli\u003eCobra\u003c\/li\u003e\n\u003cli\u003eVolvo Penta DP and SX drives\u003c\/li\u003e\n\u003cli\u003eYamaha outboards, 2001 and up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 57905P trim gauge fit?\u003c\/strong\u003e The Sierra 57905P fits Mercury outboard and inboard\/outboard engines, Mariner, Force, Cobra, Volvo Penta DP and SX drives, and Yamaha outboards 2001 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy a separate sender for this gauge?\u003c\/strong\u003e No. The 57905P uses sender code BY ENG. MFR, which means it reads off the trim sender already built into the compatible engine or drive, so no additional sender purchase is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the mounting hole for this gauge?\u003c\/strong\u003e The hole size for the Sierra 57905P is 2.13 inches, sized for a standard 2 inch gauge cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much power does the 57905P trim gauge draw?\u003c\/strong\u003e Current draw is 0.10 to 0.15 amps, which is a light load on the boat's 12 volt electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bezel size on the Sierra 57905P?\u003c\/strong\u003e The bezel outer diameter is 2.39 inches, while the housing outer diameter behind the dash is 2.08 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this gauge lit for nighttime use?\u003c\/strong\u003e Yes, the 57905P has both perimeter and thru-dial lighting so the trim position stays visible at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the dial face made of and what does it look like?\u003c\/strong\u003e The 57905P has a black dial with red graduations, white numerals, and a white pointer staff, viewed through a scratch resistant curved glass lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat operating temperature range is the 57905P rated for?\u003c\/strong\u003e It is rated from -40C to 70C, suitable for marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I change the bezel style on this gauge?\u003c\/strong\u003e Optional add-on eyebrow or square bezels are available separately for the Amega series if you want a different look than the standard polished bezel that ships with the 57905P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 57905P work on Yamaha outboards from before 2001?\u003c\/strong\u003e No, the 57905P is designated for Yamaha outboards 2001 and up; earlier Yamaha outboards use a different Sierra trim gauge part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the UP-DOWN dial range mean on this trim gauge?\u003c\/strong\u003e The dial range on the 57905P shows the full travel of the drive or outboard from fully trimmed down to fully trimmed up, giving the operator a visual reference of current trim position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 57905P trim gauge weigh?\u003c\/strong\u003e The 57905P weighs 0.29 pounds.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988448620763,"sku":"SIE-57905P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/57905P__11712.1558316049.500.750.jpg?v=1785188632"},{"product_id":"sierra-58431p-2-inch-marine-trim-gauge-up-down-dial-black-bezel-amega-series","title":"Sierra 58431P 2 Inch Trim Gauge, Up-Down Dial, By Engine Manufacturer Sender Code","description":"\u003cp\u003eThe Sierra 58431P is a 2 inch trim gauge designed to display Up-Down trim\/tilt position on boats using a sender that is matched to the engine manufacturer (Sender Code: By Engine Mfr.). It features a black dial face with red graduations, white numerals, and a vivid white pointer staff for clear visibility at the helm. The gauge is finished with a scratch resistant curved glass lens and a black, near-flush bezel with a 2.38 inch bezel outer diameter and a smooth exterior finish, giving it a clean fit against the dash or instrument panel. Current draw is low, at 0.10 to 0.15 amps, keeping electrical load minimal. Because the sender code is set by the engine manufacturer rather than a single universal standard, this gauge is intended to be paired with the trim sender supplied by or matched to the boat's engine. It is built for boaters who want a dedicated, easy-to-read trim\/tilt indicator that matches the look and electrical specifications of other Sierra instrument gauges on the panel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 58431P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Range:\u003c\/strong\u003e Up-Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Code:\u003c\/strong\u003e By Engine Manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Outer Diameter:\u003c\/strong\u003e 2.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduation Color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumeral Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePointer Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 0.10 to 0.15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Smooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 3 x 4 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957420329\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 58431P trim gauge?\u003c\/strong\u003e The Sierra 58431P has a 2 inch dial with a bezel outer diameter of 2.38 inches, sized to fit standard 2 inch instrument panel cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the dial show on this gauge?\u003c\/strong\u003e It shows Up-Down trim\/tilt position, letting the operator monitor how far the outdrive or outboard is trimmed in or out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sender does the 58431P trim gauge use?\u003c\/strong\u003e Its sender code is By Engine Manufacturer, meaning the gauge is calibrated to work with the trim sender supplied by or matched to the boat's engine rather than a single universal sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the dial face?\u003c\/strong\u003e The 58431P has a black dial face with red graduations, white numerals, and a white pointer staff for high contrast and easy reading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much electrical current does this gauge draw?\u003c\/strong\u003e Current draw for the Sierra 58431P trim gauge is 0.10 to 0.15 amps, which is a light load on the boat's electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 58431P weigh?\u003c\/strong\u003e The gauge weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the product dimensions of the 58431P gauge?\u003c\/strong\u003e The Sierra 58431P ships in a package measuring 3 x 4 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 58431P have a scratch resistant lens?\u003c\/strong\u003e Yes, the trim gauge uses a scratch resistant curved glass lens over the dial.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bezel finish on this gauge?\u003c\/strong\u003e The bezel is black and near-flush, with a smooth exterior finish that sits close against the dash panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan additional bezel styles be used with the 58431P?\u003c\/strong\u003e Optional add-on eyebrow or square bezels are available separately for the Sierra 58431P trim gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 58431P a universal trim gauge?\u003c\/strong\u003e It is calibrated By Engine Manufacturer sender code rather than a single fixed range, so it should be matched to the sender used on the boat's engine.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988448882907,"sku":"SIE-58431P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/58431P__27317.1722510323.500.750.jpg?v=1785188947"},{"product_id":"sierra-59709p-sahara-2-inch-marine-trim-gauge-up-down-for-mercury-mariner-volvo-penta-dp-sx-omc-cobra-and-yamaha-2001","title":"Sierra 59709P Sahara 2 Inch Trim Gauge for Mercury, Mariner, Cobra, Volvo Penta DP\/SX and Yamaha 2001 and Later","description":"\u003cp\u003eThe Sierra 59709P is a 2 inch Sahara-style trim gauge built to give boaters a clear, accurate readout of outboard or sterndrive trim position at a glance. It uses a tan dial face with black graduations and numerals, paired with a black pointer that carries a fire-orange tip for fast visual reference even at a distance or in bright sun. The dial follows a straightforward UP - DOWN range so trim position is easy to read without guesswork.\u003c\/p\u003e\u003cp\u003eHoused behind a scratch-resistant curved glass lens, the gauge is set in a black matte, near-flush bezel that gives it a clean, low-profile look on the helm. Illumination is handled by white perimeter lighting combined with red thru-dial lighting, so the gauge stays legible from dawn through night running without washing out the dial colors. The glass lens construction adds durability against the scratches and hazing that can build up on a boat over time.\u003c\/p\u003e\u003cp\u003eThis gauge is designed to fit Mariner, Mercury, Cobra, and Volvo Penta DP and SX drives, as well as Yamaha outboards from 2001 and on. As a Sierra part, it is built to meet or exceed the specifications of the original equipment it replaces and is backed by Sierra's customer satisfaction warranty covering defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 59709P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Color:\u003c\/strong\u003e Tan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduations and Numerals:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePointer:\u003c\/strong\u003e Black with fire-orange tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e Black matte, near-flush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens:\u003c\/strong\u003e Scratch-resistant curved glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e White perimeter and red thru-dial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Range:\u003c\/strong\u003e UP - DOWN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 4 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957420053\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMariner, Mercury, Cobra, and Volvo Penta DP and SX drives\u003c\/li\u003e\n\u003cli\u003eYamaha outboards, 2001 and on\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 59709P trim gauge fit?\u003c\/strong\u003e This gauge is designed for Mariner, Mercury, Cobra, and Volvo Penta DP and SX drives, as well as Yamaha outboards from 2001 and on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the dial on this gauge?\u003c\/strong\u003e The Sierra 59709P Sahara trim gauge has a 2 inch dial, matching the standard Sahara series gauge size for easy panel matching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the lens made of glass or plastic?\u003c\/strong\u003e The 59709P uses a scratch-resistant curved glass lens rather than plastic, which holds up better against scratching and hazing over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this trim gauge light up at night?\u003c\/strong\u003e Yes, it has white perimeter lighting combined with red thru-dial lighting, keeping the dial legible after dark without washing out its colors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colors are the dial and pointer?\u003c\/strong\u003e The 59709P has a tan dial face with black graduations and numerals, and a black pointer tipped in fire-orange for quick visual reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the trim range display work on this gauge?\u003c\/strong\u003e The dial reads on an UP - DOWN range, showing trim position directly rather than a numeric scale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this gauge weigh?\u003c\/strong\u003e The Sierra 59709P weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the gauge?\u003c\/strong\u003e The 59709P measures 5 x 4 x 5 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e The 59709P is a genuine Sierra product, built to meet or exceed the original equipment specifications it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this gauge?\u003c\/strong\u003e Sierra covers the 59709P under its customer satisfaction warranty, protecting against defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bezel style on this trim gauge?\u003c\/strong\u003e The 59709P has a black matte, near-flush bezel for a clean, low-profile look at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 59709P work on both outboard and sterndrive setups?\u003c\/strong\u003e Yes, it is intended for outboard applications like Yamaha 2001 and on, as well as sterndrive-style DP and SX drives from Mariner, Mercury, Cobra, and Volvo Penta.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988449243355,"sku":"SIE-59709P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/59709P__11491.1739462469.500.750.jpg?v=1785188374"},{"product_id":"sierra-62549p-white-premier-pro-2-trim-gauge-up-down-dial-rangerim-for-yamaha-mercury-volvo-penta-dp-sx-outboard-sterndrive","title":"Sierra 62549P White Premier Pro 2 Inch Trim Gauge for Mercury\/Volvo Penta DP\/SX and Yamaha","description":"\u003cp\u003eThe Sierra 62549P is a 2 inch White Premier Pro trim gauge built for boats running Mercury\/Mercruiser and Volvo Penta DP or SX sterndrives, as well as Yamaha outboard setups. It reads the up-down position of the drive or outboard on a clean white-faced dial, giving the helm a quick visual reference for trim position so the operator can keep the boat running at the correct angle for speed, fuel efficiency, and ride comfort. The White Premier Pro series is designed to match other gauges in the same line, so it can be paired with matching tachometers, speedometers, fuel gauges, voltmeters, and hourmeters for a uniform helm layout. Housed in a compact 2 inch case, the gauge is sized to drop into standard 2 inch dash cutouts alongside other Premier Pro instruments. As a Sierra part, it is engineered to meet or exceed the performance of the original equipment it replaces and is built to hold up in the marine environment. It is backed by Sierra's customer satisfaction warranty, which covers the product against defects in workmanship and materials for its useful life, with repair or replacement provided if a defect occurs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 62549P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Type:\u003c\/strong\u003e Trim Gauge (Up-Down Dial)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e White Premier Pro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Face Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Mercury\/Mercruiser and Volvo Penta DP and SX drives, Yamaha outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 4 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957420282\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00731957420282\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury\/Mercruiser DP and SX sterndrives\u003c\/li\u003e\n\u003cli\u003eVolvo Penta DP and SX drives\u003c\/li\u003e\n\u003cli\u003eYamaha outboards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 62549P gauge measure?\u003c\/strong\u003e It is an up-down dial trim gauge that shows the trim position of the drive or outboard, letting the operator see at a glance whether the unit is trimmed in or out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and drives is the 62549P trim gauge compatible with?\u003c\/strong\u003e The 62549P is built for Mercury\/Mercruiser and Volvo Penta DP and SX drives as well as Yamaha outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size dial does this gauge have?\u003c\/strong\u003e The Sierra 62549P has a 2 inch dial, sized to fit standard 2 inch dash cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the gauge face?\u003c\/strong\u003e The 62549P is part of Sierra's White Premier Pro series, so the dial face is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I match this gauge with other instruments at the helm?\u003c\/strong\u003e Yes, the White Premier Pro series that the 62549P belongs to is designed so tachometers, speedometers, fuel gauges, voltmeters, and hourmeters in the same line share a matching look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 62549P?\u003c\/strong\u003e The item dimensions for the Sierra 62549P are 4 x 4 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 62549P trim gauge weigh?\u003c\/strong\u003e The Sierra 62549P weighs 0.31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 62549P a genuine OEM part or an aftermarket copy?\u003c\/strong\u003e The 62549P is a genuine Sierra part, engineered to meet or exceed the performance of the original equipment it replaces rather than being a generic aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 62549P covered by a warranty?\u003c\/strong\u003e Yes, the 62549P is covered under Sierra's customer satisfaction warranty, which protects against defects in workmanship and materials for the product's useful life, with repair or replacement if a defect occurs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 62549P?\u003c\/strong\u003e Ordering the Sierra 62549P gets you the 2 inch White Premier Pro trim gauge itself, ready to install in a standard 2 inch dash opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 62549P work if I only have a Mercury drive and not a Yamaha outboard?\u003c\/strong\u003e Yes, the Sierra 62549P is compatible with Mercury\/Mercruiser and Volvo Penta DP and SX drives on their own, as well as with Yamaha outboards.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988449505499,"sku":"SIE-62549P","price":48.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/WhitePremierProTrimGauge_62549P_p400.png?v=1784938639"},{"product_id":"sierra-62726p-2-inch-trim-gauge-black-premier-pro-12v-marine-trim-indicator-for-suzuki-4-stroke-2002-and-newer","title":"Sierra 62726P Trim Gauge, Black Premier Pro 2 Inch - Suzuki 4-Stroke 2002+","description":"\u003cp\u003eThe Sierra 62726P is a 2 inch Black Premier Pro trim gauge built for Suzuki 4-Stroke outboards from 2002 and newer. It reads out trim\/tilt position on a black dial with white gradations and a white pointer staff, giving the helm a clean, easy-to-read reference for outboard trim angle at a glance. The gauge runs on a 12 VDC electrical system and uses full automotive-type lighting so the dial illuminates evenly at night without a \"halo\" ring around the edge, matching the look of the rest of a Premier Pro gauge set.\u003c\/p\u003e\u003cp\u003eThe face is protected by a scratch resistant curved glass lens set into a black, near-flush bezel for a low-profile, factory-style finish that blends into a helm panel rather than standing proud of it. It mounts into a standard 2.13 inch panel cutout, matching other gauges in the Premier Pro 2 inch lineup so it can be installed alongside matching tachometers, speedometers, fuel gauges, and voltmeters for a uniform dash. This trim gauge is intended for Suzuki 4-Stroke outboards built in 2002 and later.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 62726P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Color:\u003c\/strong\u003e Black with white gradations and white pointer staff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e Black, near-flush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens:\u003c\/strong\u003e Scratch resistant curved glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 2.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Full automotive-type lighting, no halo around dial edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Suzuki 4-Stroke, 2002 and newer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 20 x 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.41 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957398338\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki 4-Stroke outboards, 2002 and newer\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats or engines does the Sierra 62726P trim gauge fit?\u003c\/strong\u003e The 62726P Black Premier Pro trim gauge is built for Suzuki 4-Stroke outboards from 2002 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to mount this gauge?\u003c\/strong\u003e A 2.13 inch mounting hole is required to install the Sierra 62726P, which has a 2 inch dial.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 62726P trim gauge run on?\u003c\/strong\u003e It operates on a 12 VDC electrical system, standard for the boats it is designed to fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the gauge have a lit dial for night running?\u003c\/strong\u003e Yes, the 62726P uses full automotive-type lighting that illuminates the dial evenly without a halo ring around the edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the dial and bezel?\u003c\/strong\u003e The Sierra 62726P has a black dial with white gradations and a white pointer staff, set in a black, near-flush bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of and how durable is it?\u003c\/strong\u003e A scratch resistant curved glass lens covers the face of the 62726P, protecting the dial from wear at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim gauge weigh?\u003c\/strong\u003e The Sierra 62726P weighs 0.41 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I match this trim gauge with other gauges at the helm?\u003c\/strong\u003e Yes, the 62726P is part of the Black Premier Pro 2 inch gauge line, so it can be paired with matching tachometers, speedometers, fuel gauges, and voltmeters for a uniform dash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this gauge genuine Sierra or an aftermarket copy?\u003c\/strong\u003e The 62726P is a genuine Sierra Black Premier Pro gauge, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 62726P?\u003c\/strong\u003e Ordering 62726P gets you the single Black Premier Pro 2 inch trim gauge for Suzuki 4-Stroke outboards, 2002 and newer.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988449636571,"sku":"SIE-62726P","price":48.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/62726P__44264.1739462455.500.750.jpg?v=1785189105"},{"product_id":"sierra-61908p-sahara-2-inch-trim-gauge-up-down-dial-for-johnson-evinrude-and-suzuki-4-stroke-outboards","title":"Sierra 61908P Sahara 2 Inch Up-Down Trim Gauge for Johnson\/Evinrude Outboards","description":"\u003cp\u003eThe Sierra 61908P is a Sahara series 2 inch up-down dial range trim gauge designed to show outboard and I\/O trim position directly from the engine manufacturer's trim sender. The dial face reads trim angle across an up-down range so the operator can see at a glance whether the drive unit is trimmed in or out, helping maintain the correct running angle for fuel efficiency, bow rise control, and handling in varying sea conditions. It is built for Johnson\/Evinrude outboard applications and carries the Sahara gauge styling used across Sierra's instrument line, making it a straightforward match for boats already fitted with Sierra Sahara gauges or for owners replacing a failed or fogged factory trim gauge. The gauge measures 4 x 4 x 5 inches and weighs 0.29 pounds. As with all Sierra parts, the 61908P is backed by Sierra's customer satisfaction warranty, which covers the product against defects in workmanship and materials for its useful life, with repair or replacement at no charge if it fails to meet that standard.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 61908P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Sahara\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Type:\u003c\/strong\u003e Up-Down Dial Range Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Application:\u003c\/strong\u003e Johnson\/Evinrude outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 4 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957420459\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eJohnson\/Evinrude outboards\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 61908P trim gauge do?\u003c\/strong\u003e It displays outboard or drive trim position on a 2 inch up-down dial, letting the operator see whether the unit is trimmed in or out for the current running conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines is the 61908P designed for?\u003c\/strong\u003e The Sierra 61908P Sahara trim gauge is designed for Johnson\/Evinrude outboard applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the dial on this gauge?\u003c\/strong\u003e The dial face on the 61908P is 2 inches, matching the compact Sahara gauge format.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 61908P weigh?\u003c\/strong\u003e The Sierra 61908P weighs 0.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the trim gauge?\u003c\/strong\u003e The 61908P measures 4 x 4 x 5 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 61908P covered by a warranty?\u003c\/strong\u003e Yes, the 61908P is covered under Sierra's customer satisfaction warranty, which covers defects in workmanship and materials for the useful life of the product, with repair or replacement at no charge if it fails to comply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gauge work with a factory trim sender?\u003c\/strong\u003e The 61908P is built to read trim position directly from the engine manufacturer's trim sender on compatible Johnson\/Evinrude outboards, so no additional sender is required if the boat already has one installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 61908P part of a matched gauge set?\u003c\/strong\u003e The 61908P belongs to Sierra's Sahara gauge series, so it can be paired with other Sahara gauges for a matching instrument panel look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 61908P replace a cracked or fogged factory trim gauge?\u003c\/strong\u003e Yes, it is intended as a direct replacement trim gauge for compatible Johnson\/Evinrude applications where the original gauge has failed or fogged over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 61908P?\u003c\/strong\u003e The order includes the Sierra 61908P Sahara up-down trim gauge itself, ready to wire into a compatible Johnson\/Evinrude trim sender circuit.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988449669339,"sku":"SIE-61908P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SaharaTrim_61908P_p400.png?v=1784938641"},{"product_id":"sierra-62727p-trim-gauge-black-premier-pro-2-inch-fits-mercury-mercruiser-volvo-penta-dp-sx-and-yamaha-2001-trim-senders","title":"Sierra 62727P Trim Gauge, Black Premier Pro 2 Inch - Mercury\/Volvo DP\/SX\/Yamaha 2001+","description":"\u003cp\u003eThe Sierra 62727P is a 2 inch Black Premier Pro trim gauge built for boaters who want clean, accurate trim position readings at the helm with a factory-quality look. It uses a black dial with white gradations and a white pointer staff, so the needle stays easy to read at a glance in daylight or at night. The gauge is fitted with a scratch-resistant curved glass lens set into a black, near-flush bezel, giving it a low-profile appearance that blends into a dash rather than standing out from it.\u003c\/p\u003e\u003cp\u003eLighting is a key feature of this gauge: it uses full automotive-type illumination with no halo effect around the dial edges, so the face lights evenly instead of showing a bright ring around the perimeter. The gauge runs on a standard 12 VDC marine electrical system and installs into a 2.13 inch mounting hole, matching common helm panel cutouts. It is designed to work with Mercury, Volvo Penta DP\/SX, and Yamaha outboard and sterndrive trim systems from 2001 and newer.\u003c\/p\u003e\u003cp\u003eBecause it shares the Premier Pro 2 inch styling line, the 62727P can be paired with matching Sierra gauges of the same size and dial finish for a consistent instrument panel. It ships as a single gauge unit and carries a limited warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 62727P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Premier Pro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Size:\u003c\/strong\u003e 2.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Color:\u003c\/strong\u003e Black with white gradations and white pointer staff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e Black, near-flush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Scratch-resistant curved glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Full automotive-type, no halo around dial edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Style:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5 x 20 x 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957398581\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury\u003c\/li\u003e\n\u003cli\u003eVolvo Penta DP\/SX\u003c\/li\u003e\n\u003cli\u003eYamaha, 2001 and newer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting hole does the Sierra 62727P trim gauge need?\u003c\/strong\u003e The Sierra 62727P Premier Pro trim gauge requires a 2.13 inch mounting hole, matching standard 2 inch dial gauge cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats or engines is the 62727P trim gauge designed for?\u003c\/strong\u003e This trim gauge is designed for Mercury, Volvo Penta DP\/SX, and Yamaha applications from 2001 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 62727P trim gauge run on?\u003c\/strong\u003e It operates on a 12 VDC marine electrical system, which is standard for most recreational boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the dial and pointer on the Sierra 62727P?\u003c\/strong\u003e The 62727P has a black dial face with white gradations and a white pointer staff, set behind a black, near-flush bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 62727P trim gauge have a halo around the dial when lit?\u003c\/strong\u003e No, the Sierra 62727P uses full automotive-type lighting with no halo effect around the dial edges, so illumination is even across the face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on the 62727P gauge?\u003c\/strong\u003e The gauge uses a scratch-resistant curved glass lens, which helps protect the dial face from scuffs while maintaining a clear, low-glare view.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 62727P trim gauge weigh?\u003c\/strong\u003e The 62727P weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 62727P a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 62727P is a genuine Sierra Premier Pro gauge, not a generic aftermarket substitute, and carries a limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 62727P?\u003c\/strong\u003e Ordering the 62727P Premier Pro trim gauge includes one gauge unit; matching Premier Pro gauges are sold separately if you want to build out a full instrument set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 62727P be matched with other Premier Pro gauges?\u003c\/strong\u003e Yes, the 62727P shares the 2 inch Premier Pro black dial styling, so it can be paired with other Premier Pro gauges of the same size for a consistent panel look.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988449702107,"sku":"SIE-62727P","price":48.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/62727P__60352.1739462454.500.750.jpg?v=1785189048"},{"product_id":"sierra-63483p-sterling-2-inch-trim-gauge-for-suzuki-4-stroke-and-johnson-evinrude-outboards","title":"Sierra 63483P Sterling 2 Inch Trim Gauge for Suzuki 4-Stroke Outboard, J\/E Style","description":"\u003cp\u003eThe Sierra 63483P is a Sterling series 2 inch trim gauge built for Suzuki 4-stroke outboard installations, finished in the J\/E style to match complementary Sterling instrumentation. It displays engine trim position on the helm so the operator can monitor and adjust drive angle for optimal running trim, fuel efficiency, and handling across varying load and speed conditions. The gauge is designed as a direct-fit instrument for the Suzuki 4-stroke outboard application it is built for, letting boat owners replace a failed or aging trim gauge with a part matched specifically to that engine's trim sender output rather than adapting a generic gauge.\u003c\/p\u003e\u003cp\u003eAs part of the Sierra Sterling gauge line, the 63483P is built to meet or exceed the performance of the original equipment gauge it replaces and is engineered to hold up in the marine environment. Sierra backs its gauges with an industry customer satisfaction warranty covering defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 63483P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Sterling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Style:\u003c\/strong\u003e J\/E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Engine Type:\u003c\/strong\u003e Suzuki 4-stroke outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 8 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957419637\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuzuki 4-stroke outboard engines using a compatible trim sender\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 63483P trim gauge fit?\u003c\/strong\u003e The Sierra 63483P Sterling trim gauge is built for Suzuki 4-stroke outboard engines with a compatible trim sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 63483P trim gauge?\u003c\/strong\u003e This gauge has a 2 inch diameter face, matching the Sterling 2 inch gauge series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge series and style is the 63483P part of?\u003c\/strong\u003e Part number 63483P belongs to Sierra's Sterling gauge line and is finished in the J\/E style so it can be paired with other Sterling J\/E instruments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 63483P trim gauge weigh?\u003c\/strong\u003e The Sierra 63483P weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the boxed dimensions of the 63483P?\u003c\/strong\u003e The Sierra 63483P ships in an 8 x 8 x 8 inch package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 63483P a genuine Sierra part or aftermarket copy?\u003c\/strong\u003e The 63483P is a genuine Sierra Sterling series gauge, not a generic aftermarket copy, and is covered by Sierra's customer satisfaction warranty against defects in workmanship and materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gauge work with a non-Suzuki outboard?\u003c\/strong\u003e The 63483P trim gauge is built specifically for Suzuki 4-stroke outboard applications; compatibility with other engine brands is not specified for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 63483P include a trim sender?\u003c\/strong\u003e The listing covers the Sierra 63483P trim gauge itself; a trim sender is not included as part of this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 63483P?\u003c\/strong\u003e Ordering part number 63483P gets you one Sierra Sterling 2 inch J\/E trim gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 63483P covered by a warranty?\u003c\/strong\u003e Yes, the 63483P qualifies for Sierra's industry customer satisfaction warranty, which covers repair or replacement of defective products for the useful life of the part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 63483P?\u003c\/strong\u003e The UPC for the Sierra 63483P trim gauge is 731957419637.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988450193627,"sku":"SIE-63483P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SterlingTrimGauge_63483P_p400.png?v=1784938633"},{"product_id":"sierra-65503p-lido-series-2-inch-trim-gauge-for-honda-outboards-scratch-resistant-npt","title":"Sierra 65503P Lido Trim Gauge, 2 Inch, for Honda Outboards","description":"\u003cp\u003eThe Sierra 65503P is a 2 inch Lido-style trim gauge built specifically for Honda outboard engines. It reads engine trim\/tilt position on a scratch resistant face, giving boaters a clear, durable readout that holds up to sun exposure, spray, and everyday helm wear. The gauge mounts and reads up-down according to the engine manufacturer's trim sender configuration, so it is calibrated to work correctly with Honda outboard trim systems rather than being a universal, one-size-fits-all dial.\u003c\/p\u003e\u003cp\u003eSierra builds this gauge to match the fit, form, and function of the original equipment it is designed to pair with, using an NPT thread connection for mounting. The compact housing measures 6 x 4.25 x 8 inches as packaged and weighs 0.52 pounds, making it a straightforward helm or dash addition for Honda-powered boats. Because Sierra offers separate Lido trim gauge part numbers for other engine brands, this listing (65503P) is the correct choice only when the boat is powered by a Honda outboard.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 65503P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Lido\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Honda outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 4.25 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.52 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957423337\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda outboard engines, 2 inch gauge, reads up-down according to engine manufacturer trim sender configuration\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 65503P?\u003c\/strong\u003e The 65503P is a 2 inch Lido-style trim gauge made by Sierra for Honda outboard engines, used to display engine trim\/tilt position at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is this trim gauge?\u003c\/strong\u003e The gauge face measures 2 inches, matching standard Lido-series Sierra trim gauges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 65503P fit Honda outboards only?\u003c\/strong\u003e Yes, part number 65503P is built specifically for Honda outboard engines and reads trim position according to Honda's engine manufacturer trim sender configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gauge work on a Mercury or Yamaha outboard?\u003c\/strong\u003e No. Sierra makes separate Lido trim gauges for other brands, including 65504P for Mercury O\/B and I\/O, Mariner, Force, Cobra, Volvo DP and SX, and Yamaha 2001 and up, and 65505P for Yamaha outboards built before 2001, so a Honda-powered boat needs the 65503P specifically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 65503P use?\u003c\/strong\u003e The Sierra 65503P trim gauge uses an NPT thread connection for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 65503P gauge?\u003c\/strong\u003e As packaged, the Sierra 65503P measures 6 x 4.25 x 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 65503P weigh?\u003c\/strong\u003e The 65503P trim gauge weighs 0.52 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the gauge face scratch resistant?\u003c\/strong\u003e Yes, the 65503P is part of Sierra's Lido line of gauges, which are built with scratch resistant faces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 65503P a genuine Sierra part?\u003c\/strong\u003e Yes, the 65503P is a genuine Sierra trim gauge identified under UPC 731957423337.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the up-down by engine manufacturer rating mean on this gauge?\u003c\/strong\u003e It means the Sierra 65503P is calibrated to read trim position based on the specific trim sender signal used by the Honda engine it is paired with, rather than a single universal scale.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988450423003,"sku":"SIE-65503P","price":86.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/65503P__34585.1722382547.500.750.jpg?v=1785189185"},{"product_id":"sierra-65504p-lido-2-marine-trim-gauge-up-down-dial-mercury-volvo-penta-dp-sx-and-yamaha-sender-compatible","title":"Sierra 65504P Trim Gauge, 2 Inch Up-Down Dial, By Engine Manufacturer Sender","description":"\u003cp\u003eThe Sierra 65504P is a 2 inch trim gauge designed to display outboard or sterndrive trim position on a white dial with black numerals and a black pointer tipped in fire-orange for quick, at-a-glance readability. The gauge uses a By Engine Manufacturer sender code, meaning it is built to read trim position signals from the engine or drive manufacturer's own trim sending unit rather than requiring a separate Sierra sender. A scratch resistant curved glass lens sits over the dial face, set into a polished stainless steel, near-flush bezel that gives the helm a clean, integrated look. Behind the dial, white perimeter lighting combined with red thru-dial lighting keeps the Up-Down scale legible at night without washing out surrounding gauges.\u003c\/p\u003e\u003cp\u003eDraw is light at 0.10 to 0.15 amps, so it will not tax a typical helm circuit. This gauge is intended for boats running Mercruiser, Volvo Penta DP\/SX, or Yamaha power packages equipped with an engine-manufacturer trim sender, and pairs with Sierra's family of Lido-style 2 inch gauges for a matched panel look.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 65504P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Range:\u003c\/strong\u003e Up-Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Code:\u003c\/strong\u003e By Engine Manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Outer Diameter:\u003c\/strong\u003e 2.34 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 0.10 to 0.15 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens:\u003c\/strong\u003e Scratch resistant curved glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Material:\u003c\/strong\u003e Stainless steel, near-flush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumerals:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePointer:\u003c\/strong\u003e Black with fire-orange tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e White perimeter and red thru-dial lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercruiser sterndrive applications with an engine-manufacturer trim sender\u003c\/li\u003e\n\u003cli\u003eVolvo Penta DP\/SX drive applications with an engine-manufacturer trim sender\u003c\/li\u003e\n\u003cli\u003eYamaha outboard applications with an engine-manufacturer trim sender\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 65504P trim gauge display?\u003c\/strong\u003e The 65504P displays outboard or sterndrive trim position on a 2 inch Up-Down dial, letting the operator see trim position at a glance from the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gauge need a separate Sierra trim sender?\u003c\/strong\u003e No, the 65504P uses a By Engine Manufacturer sender code, meaning it reads the trim signal directly from the engine or drive manufacturer's own trim sending unit rather than requiring a Sierra-brand sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bezel outer diameter on the 65504P?\u003c\/strong\u003e The bezel outer diameter of the Sierra 65504P trim gauge is 2.34 inches, with a 2 inch dial face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current does the 65504P draw?\u003c\/strong\u003e Current draw on the 65504P trim gauge is 0.10 to 0.15 amps, which is light enough for a standard helm circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on this trim gauge?\u003c\/strong\u003e A scratch resistant curved glass lens covers the dial on the 65504P, set into a polished stainless steel, near-flush bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 65504P lighted for nighttime use?\u003c\/strong\u003e Yes, the gauge has white perimeter lighting along with red thru-dial lighting so the Up-Down scale stays legible after dark.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the dial face and pointer?\u003c\/strong\u003e The 65504P has a white dial with black numerals and a black pointer tipped in fire-orange for visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Sierra 65504P intended for?\u003c\/strong\u003e The 65504P is intended for Mercruiser, Volvo Penta DP\/SX, and Yamaha applications equipped with an engine-manufacturer trim sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 65504P weigh?\u003c\/strong\u003e The Sierra 65504P trim gauge weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the bezel style be changed on this gauge?\u003c\/strong\u003e The 65504P's standard near-flush stainless steel bezel can be paired with optional add-on eyebrow or square bezels available separately as gauge accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 65504P a genuine Sierra part?\u003c\/strong\u003e Yes, the 65504P is a genuine Sierra trim gauge, not an aftermarket equivalent, and carries the Sierra brand on the dial and packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 65504P trim gauge?\u003c\/strong\u003e The 65504P ships as the gauge itself, ready to wire into a helm panel using an engine-manufacturer trim sender signal.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988450521307,"sku":"SIE-65504P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/65504P.png?v=1784938643"},{"product_id":"sierra-63482p-sterling-2-inch-marine-trim-gauge-for-mercruiser-volvo-penta-dp-sx-yamaha-sterndrives-stainless-steel","title":"Sierra 63482P Sterling 2 Inch Trim Gauge for Mercruiser, Volvo DP\/SX, Yamaha 01","description":"\u003cp\u003eThe Sierra 63482P Sterling trim gauge is a 2 inch stainless steel gauge that displays engine trim position as an up-down reading determined by the engine manufacturer, rather than a fixed universal scale. This lets the gauge track the actual trim range of the drive it is paired with instead of forcing a generic reading that may not match your setup. The face is sized to match the rest of the Sterling 2 inch instrument line, so it can be panel-mounted alongside matching voltmeters, water pressure, and water temperature gauges for a uniform helm layout.\u003c\/p\u003e\u003cp\u003eConstruction uses a stainless steel housing for corrosion resistance in the marine environment, and the gauge connects using NPT threaded fittings. It is built to work with Mercruiser, Volvo Penta DP\/SX, and Yamaha 01 drive setups, making it a direct fit for boats running these drive systems that need a trim position readout at the helm.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 63482P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Size:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Range:\u003c\/strong\u003e Up-Down by Engine Manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.5 x 4.02 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drives:\u003c\/strong\u003e Mercruiser, Volvo Penta DP\/SX, Yamaha 01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957419620\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercruiser\u003c\/li\u003e\n\u003cli\u003eVolvo Penta DP\/SX\u003c\/li\u003e\n\u003cli\u003eYamaha 01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers listed\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Sierra 63482P trim gauge?\u003c\/strong\u003e The Sierra 63482P Sterling trim gauge has a 2 inch gauge face, matching the rest of the Sterling 2 inch instrument series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the trim reading work on this gauge?\u003c\/strong\u003e Trim position on the 63482P is displayed as up-down movement calibrated by the engine manufacturer, so the reading follows the specific trim range of the drive it is installed with rather than a single fixed scale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat drives is the 63482P trim gauge compatible with?\u003c\/strong\u003e This gauge is built for Mercruiser, Volvo Penta DP\/SX, and Yamaha 01 drive systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Sierra 63482P made from?\u003c\/strong\u003e Stainless steel is used for the housing of the 63482P trim gauge, providing corrosion resistance for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the physical dimensions of the 63482P gauge?\u003c\/strong\u003e The Sierra 63482P measures 3.5 x 4.02 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 63482P trim gauge weigh?\u003c\/strong\u003e The 63482P weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread type does the 63482P use for installation?\u003c\/strong\u003e NPT threaded fittings are used for connecting the Sierra 63482P trim gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 63482P be matched with other Sterling gauges at the helm?\u003c\/strong\u003e Yes, the 63482P shares the 2 inch Sterling gauge face size, so it can be mounted alongside other Sterling 2 inch gauges such as voltmeters or water pressure gauges for a consistent panel look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 63482P a genuine Sierra part?\u003c\/strong\u003e The 63482P is a genuine Sierra Sterling series trim gauge, sold under Sierra's part number 63482P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the 63482P trim gauge?\u003c\/strong\u003e The 63482P ships as the trim gauge unit itself; it is one item per package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 63482P have a fixed trim range like other gauges?\u003c\/strong\u003e No, unlike gauges with a preset numeric range, the 63482P displays trim as an up-down indication set by the engine manufacturer, since trim ranges vary between drive builders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Sierra 63482P?\u003c\/strong\u003e The Sierra 63482P trim gauge carries UPC 731957419620.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988450717915,"sku":"SIE-63482P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/63482P__31803.1558316142.500.750.jpg?v=1785188891"},{"product_id":"sierra-65502p-lido-2-inch-trim-gauge-for-johnson-evinrude-suzuki-4-stroke-outboards","title":"Sierra 65502P Lido 2 Inch Trim Gauge for Honda Outboard Engines","description":"\u003cp\u003eThe Sierra 65502P is a 2 inch Lido trim position gauge built for Honda outboard engines. It displays engine trim angle on a compact 2 inch gauge face, calibrated to move up and down in step with the engine manufacturer's own trim system so the reading matches how the drive actually tilts and trims. This gives the helm an accurate, at-a-glance reference for trim position rather than a generic scale that only approximates the engine's real range of motion.\u003c\/p\u003e\u003cp\u003eAs part of Sierra's Lido gauge line, the 65502P is designed to fit into a standard helm or dash panel alongside other Lido-series instruments, giving a matching instrumentation look across the console. The gauge ships as a complete unit ready to wire into a compatible Honda outboard trim sender, with no separate calibration module required for its intended fitment.\u003c\/p\u003e\u003cp\u003eSierra builds its instruments to meet or exceed the performance of the original equipment they replace, engineered to hold up in the marine environment. The 65502P is intended specifically for Honda outboard engines; it is not interchangeable with the other engine-brand versions in the Lido trim gauge line, which are sold under their own separate part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 65502P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Diameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e Up-Down by Engine Manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Fitment:\u003c\/strong\u003e Honda outboard engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Lido\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.5 x 3.75 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 731957423306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda outboard engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 65502P trim gauge fit?\u003c\/strong\u003e The Sierra 65502P is built for Honda outboard engines, with its up-down trim display calibrated to match Honda's engine trim system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 65502P gauge face?\u003c\/strong\u003e It has a 2 inch gauge face, matching the standard 2 inch cutout size used across Sierra's Lido instrument line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 65502P work on a non-Honda outboard?\u003c\/strong\u003e No. The 65502P is calibrated specifically to Honda's trim system; other engine brands use separate Lido trim gauge part numbers built for their own trim calibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 65502P require a separate calibration module?\u003c\/strong\u003e No additional calibration module is needed for the 65502P's intended Honda outboard fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 65502P gauge?\u003c\/strong\u003e The Sierra 65502P measures 3.5 x 3.75 x 5 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 65502P weigh?\u003c\/strong\u003e The gauge weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 65502P part of a matching instrument set?\u003c\/strong\u003e Yes, the 65502P belongs to Sierra's Lido gauge series, designed to match other Lido-line instruments at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'up-down by engine manufacturer' mean on this gauge?\u003c\/strong\u003e It means the 65502P's trim needle movement is calibrated to follow the specific up and down trim range defined by Honda, rather than a generic universal scale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 65502P genuine Sierra or aftermarket?\u003c\/strong\u003e The 65502P is a genuine Sierra part, manufactured to meet or exceed the performance of the original equipment gauge it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 65502P?\u003c\/strong\u003e The UPC for the Sierra 65502P trim gauge is 731957423306.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 65502P made?\u003c\/strong\u003e The 65502P trim gauge is made in the United States.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988450914523,"sku":"SIE-65502P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/65502P__20567.1722514112.500.750.jpg?v=1785188374"},{"product_id":"sierra-67023p-sterling-2-inch-trim-gauge-black-fits-mercury-mariner-volvo-penta-dp-sx-and-yamaha-2001-trim-senders","title":"Sierra 67023P Trim Gauge, 2 Inch, Black, for Johnson\/Evinrude (All) \u0026 Suzuki 4-Stroke 2002 \u0026 Up","description":"\u003cp\u003eThe Sierra 67023P is a 2 inch trim gauge in black finish, built to monitor outboard trim position at the helm. It is designed to fit Johnson\/Evinrude (All) outboards and Suzuki 4-stroke outboards 2002 and up, giving boaters a clear, at-a-glance readout of trim angle so the drive can be adjusted for the best running attitude, fuel efficiency, and ride comfort across varying speeds and load conditions. The gauge housing and internal components are built from metal for durability in the marine environment, resisting the vibration, moisture, and UV exposure typical of helm-mounted instruments. Its compact 2 inch diameter fits standard helm gauge panels without requiring a larger cutout, making it a straightforward fit or replacement for boats already set up with 2 inch instrumentation. As a Sierra product, it is engineered to meet or exceed the performance of the original equipment it replaces, and it is backed by Sierra's customer satisfaction warranty, which covers the product against defects in workmanship and materials for its useful life. This gauge is intended for boat owners and technicians who need a reliable trim indicator matched to Johnson\/Evinrude or Suzuki 4-stroke rigging, whether outfitting a new helm or swapping out a worn or malfunctioning trim gauge.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 67023P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\/Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJohnson\/Evinrude (All)\u003c\/li\u003e\n\u003cli\u003eSuzuki 4-stroke, 2002 \u0026amp; up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and engines does the Sierra 67023P trim gauge fit?\u003c\/strong\u003e The Sierra 67023P is designed to fit Johnson\/Evinrude (All) outboards as well as Suzuki 4-stroke outboards from 2002 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 67023P trim gauge?\u003c\/strong\u003e It has a 2 inch diameter, matching standard helm gauge panel cutouts sized for 2 inch instruments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 67023P?\u003c\/strong\u003e This trim gauge has a black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the trim gauge made of?\u003c\/strong\u003e The Sierra 67023P is constructed of metal for durability in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 67023P trim gauge weigh?\u003c\/strong\u003e It weighs 0.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 67023P a genuine Sierra part or aftermarket?\u003c\/strong\u003e The 67023P is a genuine Sierra product, engineered to meet or exceed the performance of the original equipment part it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 67023P come with a warranty?\u003c\/strong\u003e Yes, the 67023P is covered under Sierra's customer satisfaction warranty, which protects against defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 67023P work on a Suzuki 2-stroke outboard?\u003c\/strong\u003e No, the Suzuki fitment for the 67023P is specifically for 4-stroke outboards from 2002 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a trim gauge like the 67023P do?\u003c\/strong\u003e It displays the trim position of the outboard at the helm so the operator can monitor and adjust drive angle for optimal running attitude and efficiency.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 67023P suitable for replacing a worn or failed trim gauge?\u003c\/strong\u003e Yes, the 2 inch black Sierra 67023P is intended as a direct fit for helms already equipped with 2 inch trim gauge instrumentation on compatible Johnson\/Evinrude or Suzuki 4-stroke rigging.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988451012827,"sku":"SIE-67023P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/67023P__64029.1722368775.500.750.jpg?v=1785188609"},{"product_id":"sierra-68381p-arctic-2-trim-gauge-white-bezel-fits-yamaha-pre-2001-outboards-up-down-position","title":"Sierra 68381P Trim Gauge, 2 Inch, Yamaha Outboards Pre-2001","description":"\u003cp\u003eThe Sierra 68381P is a 2 inch trim gauge designed for Yamaha outboard applications built prior to 2001. It displays an Up-Down trim range and is compatible with trim senders by engine manufacturer, making it a direct fit for boats using the corresponding Yamaha trim sending unit setup. The gauge features a scratch-resistant domed glass lens that sheds water and resists fogging, paired with a white bezel and black-on-white graphics for a clean, classic instrument panel look that matches other Sierra gauges of the same design family.\u003c\/p\u003e\u003cp\u003eFor visibility in low light, the 68381P uses both through-dial and perimeter lighting, so the trim position stays readable at night or in overcast conditions. The face includes U.S. And metric scales with ISO symbols where appropriate, so it reads correctly whether you are working in imperial or metric reference points. As a dedicated trim gauge, it pairs with matching Sierra tachometers, speedometers, fuel gauges, and hourmeters to complete a coordinated helm layout on boats running a Yamaha outboard from the applicable pre-2001 era.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 68381P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Range:\u003c\/strong\u003e Up-Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Compatibility:\u003c\/strong\u003e By Engine Manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Glass, domed, scratch-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphics:\u003c\/strong\u003e Black on white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Through-dial and perimeter lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e U.S. And metric scales with ISO symbols where appropriate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Outboard Brand:\u003c\/strong\u003e Yamaha, Pre-2001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 5.75 x 20.75 x 7.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282266776\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha outboards, Pre-2001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Sierra 68381P trim gauge designed for?\u003c\/strong\u003e The Sierra 68381P is built for Yamaha outboard applications from the Pre-2001 era, using an Up-Down trim display and sender compatibility set by engine manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 68381P gauge face?\u003c\/strong\u003e The dial on the Sierra 68381P trim gauge measures 2 inches, matching the common 2 inch gauge cutout used across Sierra's gauge lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 68381P work with any trim sender, or does it need a specific one?\u003c\/strong\u003e Sender compatibility on the Sierra 68381P is set by engine manufacturer, so it is matched to the trim sending unit used on the applicable Yamaha outboard rather than being a universal fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the trim gauge be read at night?\u003c\/strong\u003e Yes, the Sierra 68381P uses through-dial and perimeter lighting so the trim position remains visible in low light or after dark.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on this gauge?\u003c\/strong\u003e The 68381P uses a domed glass lens that is scratch-resistant and sheds water, helping keep the trim reading clear in wet conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 68381P weigh?\u003c\/strong\u003e The Sierra 68381P trim gauge weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 68381P?\u003c\/strong\u003e The item dimensions for the Sierra 68381P are 5.75 x 20.75 x 7.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the bezel and what do the graphics look like?\u003c\/strong\u003e The Sierra 68381P has a white bezel with black on white graphics for a clean instrument panel look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 68381P gauge show metric units?\u003c\/strong\u003e Yes, the face of the 68381P includes U.S. And metric scales along with ISO symbols where appropriate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I match this trim gauge with other gauges for the same boat?\u003c\/strong\u003e The Sierra 68381P is designed to pair with matching Sierra tachometers, speedometers, fuel gauges, and hourmeters for a coordinated helm setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 68381P made by Sierra or another manufacturer?\u003c\/strong\u003e The 68381P is a Sierra branded trim gauge, part number 68381P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 68381P trim gauge?\u003c\/strong\u003e The UPC for the Sierra 68381P is 808282266776.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988452290779,"sku":"SIE-68381P","price":39.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/68381P__36423.1722380485.500.750.jpg?v=1785189185"},{"product_id":"sierra-68380p-arctic-2-inch-trim-gauge-for-mercury-volvo-penta-dp-sx-yamaha-2001-white-bezel-up-down-scale","title":"Sierra 68380P Trim Gauge, 2 Inch Up-Down Dial, Yamaha Outboards Pre-2001","description":"\u003cp\u003eThe Sierra 68380P is a 2 inch trim gauge built for boats fitted with Yamaha outboards produced pre-2001. It reads trim position on an up-down scale and uses a by-engine-manufacturer sender code, so it pairs with the trim sender already built into the compatible Yamaha outboard rather than requiring a separate sender purchase. The dial carries a white bezel with black on white graphics for high-contrast, easy-to-read visibility from the helm.\u003c\/p\u003e\u003cp\u003eA domed glass lens covers the face. The glass sheds water and resists scratching, which matters on an instrument that lives in an open cockpit exposed to spray and sun. Through-dial and perimeter lighting illuminate the gauge for nighttime readability, and the dial includes both U.S. And metric scales with ISO symbols where applicable, so it reads correctly regardless of which measurement convention the rest of the helm uses. At 2 inches, it fits standard small-format helm cutouts alongside other Sierra 2 inch instruments.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 68380P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Range:\u003c\/strong\u003e Up-Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Code:\u003c\/strong\u003e By Engine Manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Domed glass, scratch resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphics:\u003c\/strong\u003e Black on white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Through-dial and perimeter lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e U.S. And metric scales with ISO symbols where appropriate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha Outboards, pre-2001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats does the Sierra 68380P trim gauge fit?\u003c\/strong\u003e The Sierra 68380P is designed for boats with Yamaha outboards produced pre-2001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 68380P dial?\u003c\/strong\u003e The dial measures 2 inches, sized for standard small-format helm gauge cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the sender code By Engine Manufacturer mean?\u003c\/strong\u003e It means the 68380P trim gauge is designed to work with the trim sender that is already built into the compatible Yamaha outboard, so no separate aftermarket sender is needed for this application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the gauge face glass or plastic?\u003c\/strong\u003e The 68380P uses a domed glass lens rather than plastic, which sheds water and resists scratching better than a flat plastic cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I read the 68380P trim gauge at night?\u003c\/strong\u003e Yes, it has through-dial and perimeter lighting built into the 2 inch dial for nighttime visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 68380P show metric units?\u003c\/strong\u003e The dial includes both U.S. And metric scales, with ISO symbols where appropriate, so it is readable regardless of which unit convention you use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the bezel and graphics on the 68380P?\u003c\/strong\u003e It has a white bezel with black on white graphics for high contrast at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Up-Down range on this gauge indicate?\u003c\/strong\u003e The 68380P displays trim position across an up-down range, showing where the outboard is trimmed relative to its full range of motion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 68380P trim gauge weigh?\u003c\/strong\u003e The Sierra 68380P weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gauge work with non-Yamaha outboards?\u003c\/strong\u003e The 68380P is built for Yamaha outboards pre-2001 with a by-engine-manufacturer sender; it is not specified for other engine brands.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988452946139,"sku":"SIE-68380P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/68380P__85791.1722351195.500.750.jpg?v=1785189049"},{"product_id":"sierra-68378p-arctic-2-trim-gauge-up-down-white-bezel-marine-trim-indicator-with-perimeter-lighting","title":"Sierra 2 Inch Trim Gauge 68378P for Honda Outboard Engines","description":"\u003cp\u003eThe Sierra 68378P is a 2 inch trim gauge built to monitor engine trim position (up-down) on boats powered by Honda outboard engines. It reads engine trim angle using a sender code matched to Honda's trim sender output, so the needle tracks accurately from full down to full trim-up.\u003c\/p\u003e\u003cp\u003eThe gauge features a stylish white bezel with black-on-white graphics for clear readability, plus enhanced illumination through both the dial face and the perimeter of the bezel for strong visibility at night. The glass lens is domed to shed water and resist scratching, holding up to the marine environment on the dash of any boat. The bezel measures 2.39 inches in outer diameter, and the gauge draws 0.10 to 0.15 amps during operation. Optional add-on eyebrow or square bezels are available separately for a different dash appearance.\u003c\/p\u003e\u003cp\u003eThis gauge is intended for boats with Honda outboard power where the trim sender uses a Honda-specific sender code; it is not interchangeable with Sierra gauges calibrated for other engine manufacturers' sender codes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 68378P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge (Up-Down)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Range:\u003c\/strong\u003e Up-Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Code:\u003c\/strong\u003e By Engine Manufacturer (Honda)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Color:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel Outer Diameter:\u003c\/strong\u003e 2.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 0.10 to 0.15 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Domed glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1 x 3 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282266967\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda outboard engines using a Honda trim sender code\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers are listed for this part number.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 68378P trim gauge fit?\u003c\/strong\u003e The 68378P is calibrated for Honda outboard engines, using a sender code matched to Honda's trim sender output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 68378P gauge display?\u003c\/strong\u003e This 2 inch gauge displays engine trim position on an up-down scale, letting the operator monitor how far the engine or drive is trimmed at any moment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the bezel on this trim gauge?\u003c\/strong\u003e The bezel outer diameter on the Sierra 68378P is 2.39 inches, sized for a standard 2 inch dash cutout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 68378P light up at night?\u003c\/strong\u003e Yes, the gauge has enhanced illumination through both the dial face and the perimeter of the bezel for readability at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of?\u003c\/strong\u003e The Sierra 68378P uses a domed glass lens that sheds water and resists scratching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current does this gauge draw?\u003c\/strong\u003e Current draw on the 68378P is 0.10 to 0.15 amps during normal operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the bezel?\u003c\/strong\u003e The 68378P has a white bezel with black-on-white graphics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 68378P weigh?\u003c\/strong\u003e This trim gauge weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add a different bezel style to this gauge?\u003c\/strong\u003e Optional add-on eyebrow or square bezels are available separately for the 68378P if a different dash appearance is wanted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 68378P work on a boat with a Mercury or Yamaha outboard?\u003c\/strong\u003e No. The 68378P sender code is matched to Honda engines; Sierra offers 68379P for Mercury O\/B \u0026amp; I\/O, Mariner, Force, Cobra, Volvo DP \u0026amp; SX, and Yamaha 2001 and up engines instead, since the sender code differs by engine manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the 68378P gauge?\u003c\/strong\u003e The Sierra 68378P measures 1 x 3 x 5 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there OEM cross-reference numbers for this gauge?\u003c\/strong\u003e No OEM replacement or cross-reference numbers are listed for the Sierra 68378P.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988453208283,"sku":"SIE-68378P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/68378P__10262.1739462467.500.750.jpg?v=1785188099"},{"product_id":"sierra-68403p-eclipse-2-trim-gauge-up-down-for-johnson-evinrude-suzuki-4-stroke-2002-outboards","title":"Sierra 68403P Trim Gauge, 2 Inch, Honda Outboard, Up-Down Range, By Engine Manufacturer Sender","description":"\u003cp\u003eThe Sierra 68403P is a 2 inch trim gauge built for Honda outboard engines, displaying trim and tilt position on an Up-Down dial range with a By Engine Manufacturer sender code. The gauge face uses white and blue graphics on a black dial background for clear visibility, and U.S. And metric scales with ISO symbols make it easy to read regardless of the reference system in use. A scratch-resistant domed glass lens sheds water and resists scuffing over years of use at the helm, while a low-profile bezel follows the curve of the lens to eliminate water trapping around the edge. Perimeter lighting illuminates the gauge for accurate readings at night or in low-light conditions. The 68403P is intended to replace a worn, fogged, or non-functioning trim gauge on a Honda outboard installation, restoring accurate trim position feedback at the helm. Its compact 2 inch size fits standard dash cutouts used across many helm layouts, and its sender code compatibility is matched to Honda outboard trim senders rather than a universal signal, so it reads correctly without recalibration. This is a genuine Sierra gauge, sold as part number 68403P.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 68403P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Range:\u003c\/strong\u003e Up-Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Code:\u003c\/strong\u003e By Engine Manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Honda outboard engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Glass, scratch-resistant, domed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Perimeter lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e U.S. And metric, with ISO symbols\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Graphics:\u003c\/strong\u003e White and blue on black background\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e Low-profile, contoured to lens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 2 x 3 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282267148\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHonda outboard engines\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Sierra 68403P trim gauge fit?\u003c\/strong\u003e The Sierra 68403P is designed for Honda outboard engines, using a By Engine Manufacturer sender code matched to Honda trim senders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 68403P trim gauge?\u003c\/strong\u003e This gauge has a 2 inch dial, sized to fit standard 2 inch dash cutouts at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 68403P read in metric units?\u003c\/strong\u003e Yes, the 68403P displays both U.S. And metric scales, with ISO symbols where appropriate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Up-Down dial range mean on this gauge?\u003c\/strong\u003e Up-Down is the trim\/tilt position range Sierra part number 68403P displays, showing where the drive unit is positioned between fully down and fully up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 68403P lens durable?\u003c\/strong\u003e The gauge uses a scratch-resistant domed glass lens that sheds water and resists scuffing over years of helm use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I read the 68403P gauge at night?\u003c\/strong\u003e Yes, the 68403P includes perimeter lighting around the dial for accurate readings in low light or at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the sender code on the 68403P, and why does it matter?\u003c\/strong\u003e The sender code is By Engine Manufacturer, meaning the 68403P is matched to the trim sender signal used on Honda outboards rather than a universal signal, so no recalibration is needed on a correctly matched installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 68403P trim gauge weigh?\u003c\/strong\u003e The Sierra 68403P weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 68403P gauge?\u003c\/strong\u003e The 68403P measures 2 x 3 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 68403P a genuine Sierra part?\u003c\/strong\u003e Yes, 68403P is the genuine Sierra manufacturer part number for this Honda outboard trim gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 68403P dial face?\u003c\/strong\u003e The 68403P dial uses white and blue graphics on a black background for clear contrast and readability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 68403P work on a non-Honda outboard?\u003c\/strong\u003e The 68403P's sender code is matched to Honda outboards; other engine brands use different Sierra trim gauge part numbers with their own matching sender codes.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988453404891,"sku":"SIE-68403P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/68403P__49113.1739462471.500.750.jpg?v=1785188375"},{"product_id":"sierra-68405p-eclipse-2-trim-gauge-up-down-indicator-for-mercury-volvo-penta-dp-sx-yamaha-2001-engines","title":"SeaStar 68405P Trim Gauge, 2 Inch, for Mercury, Mariner, Force, Cobra, Volvo Penta DP\/SX, Yamaha 2001 \u0026 Up","description":"\u003cp\u003eThe SeaStar 68405P is a 2 inch trim position gauge that displays engine up-down trim position on a low-profile, curved black dial with white and blue graphics. The domed glass lens sheds water and resists scratching, and perimeter lighting around the bezel keeps the dial readable at night. The scale is marked in both U.S. And metric units, with ISO symbols where appropriate, so the display reads clearly regardless of the boat's other instrumentation standards.\u003c\/p\u003e\u003cp\u003eThis gauge is designed for a sender that is coded by engine manufacturer, meaning it pairs with the trim sender built into the specific engine or drive rather than a universal sender. It is intended for use with Mercury outboard and inboard-outboard (I\/O) drives, Mariner, Force, and Cobra powerheads, Volvo Penta DP and SX drives, and Yamaha outboards from 2001 and up. The low-profile bezel follows the curve of the lens to eliminate water trapping around the mounting ring, helping keep moisture out of the housing over time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 68405P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Position Gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial Size:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Range:\u003c\/strong\u003e Up-Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Code:\u003c\/strong\u003e By engine manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Style:\u003c\/strong\u003e 1\/8 inch NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 4 x 4 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e U.S. And metric, with ISO symbols where appropriate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Perimeter lighting for nighttime readability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury outboard (O\/B) and inboard-outboard (I\/O)\u003c\/li\u003e\n\u003cli\u003eMariner\u003c\/li\u003e\n\u003cli\u003eForce\u003c\/li\u003e\n\u003cli\u003eCobra\u003c\/li\u003e\n\u003cli\u003eVolvo Penta DP and SX drives\u003c\/li\u003e\n\u003cli\u003eYamaha, 2001 and up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar 68405P trim gauge fit?\u003c\/strong\u003e The 68405P fits Mercury outboard (O\/B) and inboard-outboard (I\/O) drives, Mariner, Force, and Cobra powerheads, Volvo Penta DP and SX drives, and Yamaha outboards from 2001 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the dial on this trim gauge?\u003c\/strong\u003e The dial on the SeaStar 68405P measures 2 inches, with overall item dimensions of 4 x 4 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this gauge compatible with a universal trim sender?\u003c\/strong\u003e No, the 68405P uses a sender code that is set by engine manufacturer, so it is matched to the trim sender built into the specific engine or drive listed in its fitment rather than a universal sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lens made of on the 68405P?\u003c\/strong\u003e The 68405P uses a domed glass lens that sheds water and resists scratching, set in a low-profile bezel that follows the curve of the lens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 68405P light up at night?\u003c\/strong\u003e Yes, perimeter lighting around the bezel keeps the dial on the 68405P readable at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this gauge fit Yamaha outboards from before 2001?\u003c\/strong\u003e The 68405P is designated for Yamaha outboards 2001 and up; it does not cover pre-2001 Yamaha outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size is used to mount the sender connection?\u003c\/strong\u003e The 68405P uses a 1\/8 inch NPT thread style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the display range on the 68405P show?\u003c\/strong\u003e The 68405P displays trim position on an up-down range, showing where the drive or outboard is trimmed relative to the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 68405P weigh?\u003c\/strong\u003e The SeaStar 68405P weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the scale markings in U.S. Or metric units?\u003c\/strong\u003e The 68405P is marked in both U.S. And metric units, with ISO symbols included where appropriate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill water pool around the bezel on this gauge?\u003c\/strong\u003e No, the 68405P's low-profile bezel follows the curve of the lens specifically to eliminate water trapping around the mounting area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 68405P work with Volvo Penta drives?\u003c\/strong\u003e Yes, the 68405P is designated for Volvo Penta DP and SX drives, in addition to Mercury, Mariner, Force, Cobra, and Yamaha 2001-and-up applications.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988453896411,"sku":"SIE-68405P","price":39.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/68405P__43031.1739462472.500.750.jpg?v=1785188573"},{"product_id":"seastar-dk4220-smartstick-and-gauge-kit-for-marine-jackplate-non-contact-position-sensor","title":"SeaStar SmartStick and Gauge Kit, DK4220, Jackplate Position Sensor and Gauge","description":"\u003cp\u003eThe SeaStar SmartStick and Gauge Kit, DK4220, pairs a jackplate position sensor with a matching analog gauge so the operator can see exact jackplate height at a glance from the helm. The SmartStick sensor uses non-contact piezoelectric magnetostrictive linear sensing technology, which improves sensor robustness and delivers higher positional accuracy than contact-style sensors. The sender is fully potted for corrosion protection, an important feature given its constant exposure to the marine environment around the transom and jackplate assembly. The companion gauge is styled to match the look of the SeaStar Jackplate and SeaStar Steering systems, so the helm presents a coordinated appearance rather than a mismatched aftermarket gauge. This kit ships as a two-piece set (sensor and gauge) and is designed for installation alongside a SeaStar Jackplate, giving boaters a precise, at-a-glance readout of jackplate position to help dial in engine height for speed, fuel economy, and shallow-water running. The DK4220 kit is a dedicated accessory within the SeaStar Jackplate product line, distinct from the separate Gauge and Harness Kit (DK4320) and the port\/starboard Accessory Adapters (DK4500P\/DK4500S) offered for the same jackplate system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DK4220\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Name:\u003c\/strong\u003e SmartStick and Gauge Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12 x 12 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Technology:\u003c\/strong\u003e Non-contact piezoelectric magnetostrictive linear sensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSender Protection:\u003c\/strong\u003e Fully potted for corrosion protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SeaStar DK4220 SmartStick and Gauge Kit include?\u003c\/strong\u003e The DK4220 kit ships as a two-piece set: a SmartStick position sensor and a matching analog gauge, sized and styled to be installed together on a SeaStar Jackplate system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the SmartStick sensor measure jackplate position?\u003c\/strong\u003e It uses non-contact piezoelectric magnetostrictive linear sensing technology, which gives the DK4220 sensor better robustness and higher positional accuracy than contact-based sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SmartStick sensor protected against corrosion?\u003c\/strong\u003e Yes, the sender in the DK4220 kit is fully potted, which protects the internal sensing components from corrosion in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the DK4220 gauge match my other SeaStar helm gauges?\u003c\/strong\u003e The gauge included in the SmartStick and Gauge Kit is styled to match the look of the SeaStar Jackplate and SeaStar Steering systems for a coordinated helm appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between DK4220 and DK4320?\u003c\/strong\u003e DK4220 is the SmartStick and Gauge Kit, which includes the position sensor and gauge, while DK4320 is a separate Gauge and Harness Kit within the same SeaStar Jackplate accessory lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need the Accessory Adapter kits along with DK4220?\u003c\/strong\u003e The Accessory Adapters, Port (DK4500P) and Starboard (DK4500S), are separate parts required specifically for installing the JP4060 accessory, not for the DK4220 SmartStick and Gauge Kit itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SeaStar SmartStick and Gauge Kit weigh?\u003c\/strong\u003e The DK4220 kit weighs 1.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the DK4220 kit?\u003c\/strong\u003e The SmartStick and Gauge Kit is packaged in a 12 x 12 x 12 inch box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SmartStick and Gauge Kit made of?\u003c\/strong\u003e The DK4220 kit's components are constructed of metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the DK4220 gauge be used without a SeaStar Jackplate?\u003c\/strong\u003e The SmartStick and Gauge Kit, DK4220, is designed to pair with a SeaStar Jackplate system, reading the jackplate's position via the SmartStick sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I want a position gauge for my jackplate?\u003c\/strong\u003e A position gauge, like the one in the DK4220 kit, lets the operator see the exact jackplate height at the helm, making it easier to dial in engine height for speed, fuel economy, and shallow-water running.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989347512539,"sku":"TEL-DK4220","price":421.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/DK4220__41521.1722502825.500.750.jpg?v=1785188001"},{"product_id":"cdi-electronics-yamaha-tilt-trim-relay-wiring-harness-857-1950","title":"CDI Electronics Yamaha Tilt\/Trim Relay Wiring Harness 857-1950","description":"\u003cp\u003eThe CDI Electronics 857-1950 is a tilt\/trim relay wiring harness built for Yamaha outboard trim systems. It supplies the wiring connection between the trim\/tilt relay and the outboard's electrical system, restoring proper up\/down trim function when the original harness has corroded, chafed, or failed. As a direct electrical component for the trim circuit, it is designed to connect cleanly into the existing Yamaha trim relay assembly without modification.\u003c\/p\u003e\u003cp\u003eThis harness is sold as a single-unit assembly (1 count) and is a straightforward swap for boat owners and marine technicians replacing a worn or damaged trim harness rather than the entire trim relay unit. Keeping the trim wiring in good condition helps prevent intermittent trim operation, blown fuses, or a non-functioning tilt\/trim system caused by a failing harness connection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CDI Electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 857-1950\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tilt\/Trim Relay Wiring Harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Yamaha outboard trim systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 count\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 736983856524\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eYamaha outboard tilt\/trim systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CDI Electronics 857-1950?\u003c\/strong\u003e It is a tilt\/trim relay wiring harness for Yamaha outboard trim systems, part number 857-1950.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this harness fit all Yamaha outboards?\u003c\/strong\u003e The 857-1950 harness is built for Yamaha outboard tilt\/trim systems; check your existing trim relay wiring against this harness before ordering since a specific model list is not published.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 857-1950 harness weigh?\u003c\/strong\u003e The CDI Electronics 857-1950 tilt\/trim harness weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the package?\u003c\/strong\u003e The 857-1950 ships as a single wiring harness, quantity 1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine CDI Electronics part?\u003c\/strong\u003e Yes, part number 857-1950 is a CDI Electronics tilt\/trim harness, not a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the CDI Electronics 857-1950 tilt\/trim harness is 736983856524.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace this harness?\u003c\/strong\u003e A worn, corroded, or chafed trim harness can cause intermittent or non-functioning tilt\/trim operation, and the 857-1950 replaces that wiring connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 857-1950 include the trim relay itself?\u003c\/strong\u003e No, the 857-1950 is the wiring harness component; it connects to the existing trim relay assembly rather than replacing the relay itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation straightforward?\u003c\/strong\u003e The 857-1950 is designed to connect into the existing Yamaha trim relay wiring without modification, making it a direct replacement for the original harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms indicate I need a new trim harness like the 857-1950?\u003c\/strong\u003e Intermittent trim operation, a trim system that won't respond, or visible wiring damage near the trim relay are common signs that a harness such as the 857-1950 needs replacing.\u003c\/p\u003e","brand":"CDI Electronics","offers":[{"title":"Default Title","offer_id":49027442213083,"sku":"CDI-857-1950","price":250.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-857-1950_lg__74787.1558114542.500.750.jpg?v=1785163464"},{"product_id":"t-h-marine-hydraulic-jack-plate-position-gauge-kit-for-cmc-power-lift-and-hydro-jacker-models","title":"T-H Marine Hydraulic Jack Plate Position Gauge Kit for CMC Power Lift and Hydro-Jacker Models","description":"\u003cp\u003eThe T-H Marine Hydraulic Jack Plate Position Gauge Kit is a dash-mounted position indicator system that lets you see exactly where your jack plate is set without leaving the helm. It is built to fit all CMC Power Lift Hydraulic Jack Plate models and all T-H Marine Hydro-Jacker Hydraulic Jack Plate models, giving boaters a safe and convenient way to determine jack plate height at a glance instead of guessing or looking over the transom.\u003c\/p\u003e\u003cp\u003eThe gauge itself is sealed and drip-proof, designed to mount directly in the dash using a standard 2 inch gauge cutout, so it fits cleanly alongside other dash instrumentation. The sending unit that reads jack plate position is completely sealed and waterproof, allowing it to hold up to the wet, exposed conditions near the transom and jack plate actuator. Together, the gauge and sending unit form a simple conversion kit that upgrades a jack plate installation with real-time position feedback.\u003c\/p\u003e\u003cp\u003eThe kit is a complete conversion package, including the position sender gauge, sending unit, sending unit bracket, actuator bracket, wire assembly, and the full set of mounting hardware (machine screws, hex nuts, hex head cap screws, and lock washers) needed to install the gauge and sender. Because it is purpose-built for CMC Power Lift and T-H Marine Hydro-Jacker jack plates, it installs using the existing jack plate mounting points without requiring a different or universal gauge system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6077\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 739697060775\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Mount Size:\u003c\/strong\u003e Standard 2 inch gauge mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Construction:\u003c\/strong\u003e Sealed, drip-proof gauge with a completely sealed, waterproof sending unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 10.25 x 6.75 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions (L x W x H):\u003c\/strong\u003e 14.41 x 6.61 x 6.46 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits all CMC Power Lift Hydraulic Jack Plate models\u003c\/li\u003e\n\u003cli\u003eFits all T-H Marine Hydro-Jacker Hydraulic Jack Plate models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine Hydraulic Jack Plate Gauge Kit, part number 6077, used for?\u003c\/strong\u003e Gauge kit 6077 is a dash-mounted position indicator system that shows the height setting of a hydraulic jack plate, letting the operator determine jack plate position safely and conveniently from the helm instead of checking visually at the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich jack plates work with gauge kit 6077?\u003c\/strong\u003e This kit fits all CMC Power Lift Hydraulic Jack Plate models and all T-H Marine Hydro-Jacker Hydraulic Jack Plate models; it is built specifically for those two jack plate lines rather than as a universal gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the gauge in kit 6077 waterproof?\u003c\/strong\u003e Yes. The gauge itself is sealed and drip-proof, and the sending unit that reads the jack plate's position is completely sealed and waterproof.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cutout does the gauge in kit 6077 require?\u003c\/strong\u003e The position gauge in the T-H Marine kit 6077 uses a standard 2 inch gauge mount, matching common dash gauge cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the T-H Marine 6077 gauge kit?\u003c\/strong\u003e The kit includes one position sender gauge, one sending unit, one sending unit bracket, one actuator bracket, one wire assembly, and the mounting hardware (self-tapping and hex head machine screws, hex nuts, and lock washers) needed to install the gauge and sender.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the T-H Marine jack plate gauge kit weigh?\u003c\/strong\u003e Gauge kit 6077 weighs 2.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 6077 gauge kit?\u003c\/strong\u003e The gauge and sending unit assembly measures 10.25 x 6.75 x 6 inches, and it ships in a package measuring 14.41 x 6.61 x 6.46 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes gauge kit 6077 work with any jack plate, or only specific brands?\u003c\/strong\u003e It is not a universal fit; it is designed to fit all CMC Power Lift Hydraulic Jack Plate models and all T-H Marine Hydro-Jacker Hydraulic Jack Plate models specifically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the position gauge from kit 6077 mount?\u003c\/strong\u003e The gauge mounts in the dash of the boat using its standard 2 inch mount, while the waterproof sending unit is installed at the jack plate to track its position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand is part number 6077?\u003c\/strong\u003e Part number 6077 is manufactured by T-H Marine and is sold as the Hydraulic Jack Plate Position Gauge Kit for CMC Power Lift and Hydro-Jacker jack plates.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027443097819,"sku":"T-H-6077","price":284.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/6077__98251.1722500906.500.750.jpg?v=1785163486"},{"product_id":"bobs-machine-action-series-jack-plate-led-gauge-kit-110-300000","title":"Bob's Machine Action Series Jack Plate LED Gauge Kit - 110-300000","description":"\u003cp\u003eThe Bob's Machine Action Series Jack Plate LED Gauge Kit lets you monitor your jack plate's height in real time from the helm. This complete kit works with all Bob's Machine Action Series jack plates and includes everything needed for installation: a sending unit, an LED gauge, and 24 feet of wiring, plus the mounting hardware.\u003c\/p\u003e\u003cp\u003eBob's Machine jack plates are pre-drilled on the back for the gauge's sending unit, which simplifies installation. Line up the sending unit with the pre-drilled mounting point, attach it with the included hardware, then run the cable up to the gauge's mounting location at the helm.\u003c\/p\u003e\u003cp\u003eThe gauge itself has a black face with LED indicators that display jack plate height in 1\/4 inch increments, giving precise readouts as you adjust trim height on the water. A photoelectric eye built into the gauge automatically regulates LED brightness so the display stays readable in changing light conditions without washing out or over-glaring at night. The gauge uses a solid-state transducer to sense position, and the sensor takes a reading every 1\/4 inch of travel.\u003c\/p\u003e\u003cp\u003eThe Bob's Machine Action Series Jack Plate LED Gauge Kit is backed by a 1 year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 110-300000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 894721000117\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e LED gauge, sending unit, 24 feet of wiring, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Length:\u003c\/strong\u003e 24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Increment:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge Face Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Type:\u003c\/strong\u003e Solid-state transducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrightness Control:\u003c\/strong\u003e Photoelectric eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All Bob's Machine Action Series jack plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year manufacturer's warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAll Bob's Machine Action Series jack plates\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bob's Machine Action Series Jack Plate LED Gauge Kit include?\u003c\/strong\u003e The kit includes an LED gauge, a sending unit, 24 feet of wiring, and the mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this gauge kit fit my jack plate?\u003c\/strong\u003e This gauge kit is designed to work with all Bob's Machine Action Series jack plates, which are pre-drilled on the back for the sending unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow precise is the height reading on the gauge?\u003c\/strong\u003e The LED gauge on part number 110-300000 takes a reading every 1\/4 inch of travel and displays jack plate height in 1\/4 inch increments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the sending unit installed?\u003c\/strong\u003e Line up the sending unit with the pre-drilled mounting point on the back of the Bob's Machine Action Series jack plate, attach it with the included hardware, then run the cable up to the gauge's mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wiring included with the kit?\u003c\/strong\u003e 24 feet of wiring is included with the Bob's Machine Action Series Jack Plate LED Gauge Kit, enough to run from the jack plate to the gauge's mounting location at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the gauge stay readable at night or in bright sun?\u003c\/strong\u003e Yes, a photoelectric eye built into the gauge automatically regulates LED brightness so the display adjusts to changing light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the gauge face?\u003c\/strong\u003e The gauge has a black face with LED indicators showing jack plate height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the gauge sense jack plate position?\u003c\/strong\u003e It uses a solid-state transducer as the sensing element, paired with the included sending unit mounted on the jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this gauge kit?\u003c\/strong\u003e The Bob's Machine Action Series Jack Plate LED Gauge Kit is backed by a 1 year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this gauge be used with any Bob's Machine jack plate?\u003c\/strong\u003e This complete gauge kit can be used with all Bob's Machine Action Series jack plates specifically, since those models are pre-drilled on the back for the sending unit.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027466068187,"sku":"BOB-110-300000","price":245.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/110-301000__50169.1722355917.500.750.jpg?v=1785163490"},{"product_id":"t-h-marine-atlas-digital-position-gauge-kit-stainless-steel-face-for-4-to-14-jack-plates","title":"T-H Marine ATLAS Digital Position Gauge Kit, Stainless Steel Face - For 4\" to 14\" Jack Plates","description":"\u003cp\u003eThe T-H Marine ATLAS Digital Position Gauge Kit gives boat operators a real-time digital readout of jack plate height, taking the guesswork out of dialing in the perfect setback and elevation for hole shot, cruise, and top-end speed. Instead of eyeballing marks on the jack plate or relying on memory, this kit puts a high-visibility LED display right at the helm area of the jack plate so you can see exact position at a glance and repeat your best settings run after run. Finished with a durable stainless steel face for corrosion resistance in the harsh marine environment, this gauge kit is built specifically to match your ATLAS hydraulic jack plate travel length, so choosing the correct kit for your jack plate size is the key decision when ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: T-H Marine\u003c\/li\u003e\n\u003cli\u003eProduct Line: ATLAS Digital Position Gauge Kit\u003c\/li\u003e\n\u003cli\u003eFace Finish: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eDisplay Type: Digital LED position readout\u003c\/li\u003e\n\u003cli\u003eItem Dimensions: 9.05 x 6.15 x 6.4 inches\u003c\/li\u003e\n\u003cli\u003eWeight: 10 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis gauge kit is sold in two versions matched to ATLAS jack plate travel length. Choose the FAGK-1SS kit if your boat is fitted with a 4 inch or 8 inch ATLAS jack plate. Choose the FAGK-2SS kit if your boat is fitted with a 6 inch, 10 inch, 12 inch, or 14 inch ATLAS jack plate. Check the travel length stamped on your existing jack plate or your original purchase paperwork before ordering, since the internal sensor travel and mounting are sized to match a specific jack plate range and are not interchangeable between kits.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Stainless Steel Face, Fits 6\" \/ 10\" \/ 12\" \/ 14\" Jack Plates (FAGK-2SS)","offer_id":49048412782811,"sku":"T-H-FAGK-2SS-DP","price":364.63,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel Face, Fits 4\" \/ 8\" Jack Plates (FAGK-1SS)","offer_id":49048412815579,"sku":"T-H-FAGK-1SS-DP","price":364.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/FAGK-2-DP_01_d9d77e4e-a337-41e7-be24-8f1cbe699f1a.jpg?v=1785436409"},{"product_id":"t-h-marine-atlas-digital-position-gauge-kit-black-face-fits-4-to-14-jack-plate-models","title":"T-H Marine ATLAS Digital Position Gauge Kit - Black Face, Fits 4\" to 14\" Jack Plate Models","description":"\u003cp\u003eThe T-H Marine ATLAS Digital Position Gauge Kit gives you an exact, repeatable readout of jack plate height every time you trim up or down. Instead of guessing at travel by eye, the black-face digital display counts 0 to 20 in 1\/4 inch increments, so you can return to your proven hole shot setting or dial in a new one with confidence. Built from stainless steel for corrosion resistance in salt and fresh water, the gauge mounts directly to the pre-drilled ATLAS jack plate body with no additional drilling required. Choose the kit that matches your jack plate travel to get a precise fit and accurate reading.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: T-H Marine\u003c\/li\u003e\n\u003cli\u003eProduct Line: ATLAS Digital Position Gauge Kit\u003c\/li\u003e\n\u003cli\u003eDisplay Face Color: Black\u003c\/li\u003e\n\u003cli\u003eReadout Type: Digital, numbered 0 to 20\u003c\/li\u003e\n\u003cli\u003eIncrement Per Number: 1\/4 inch rise\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eWeight: 1.1 pounds\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolts to pre-drilled ATLAS jack plate mounting points, no drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSizes \u0026amp; Options\u003c\/h3\u003e\u003cp\u003eThis gauge kit is sold in two versions matched to specific ATLAS jack plate travel ranges. Select FAGK-1 for 4 inch and 8 inch travel ATLAS jack plates, or FAGK-2 for 6 inch, 10 inch, 12 inch, and 14 inch travel ATLAS jack plates. Check your jack plate's model or travel specification before ordering, since the two kits are not interchangeable.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"FAGK-1, Fits 4\" \u0026 8\"","offer_id":49048429789403,"sku":"T-H-FAGK-1-DP","price":364.63,"currency_code":"USD","in_stock":true},{"title":"FAGK-2, Fits 6\", 10\", 12\" \u0026 14\"","offer_id":49048429822171,"sku":"T-H-FAGK-2-DP","price":364.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/FAGK-2-DP_01_a153baf2-eb9c-49ed-83b1-e12d817c4b0a.jpg?v=1785436544"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/FAGK-2-DP_01_02dccf4a-0951-407e-a7db-25de845ad79a.jpg?v=1785356546","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trim-tilt-jack-plates-tilt-trim-motors-hydraulics-trim-position-senders-gauges.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}