{"title":"Trim Tab Actuators","description":null,"products":[{"product_id":"bennett-6bt500843500-hydraulic-trim-tab-actuator-13-75-inch-for-standard-and-sport-trim-tab-systems","title":"Bennett 6BT500843500 Hydraulic Trim Tab Actuator, 13.75 Inch, for Standard and Sport Trim Tab Systems","description":"\u003cp\u003eThe Bennett 6BT500843500 is a 13.75-inch standard-size hydraulic trim tab actuator built as a direct replacement for worn or malfunctioning trim tab cylinders on Bennett standard and sport tab units. It works together with your boat's hydraulic power unit to provide precise control over trim tab movement, letting you adjust your vessel's pitch axis based on speed, weight distribution, and water conditions.\u003c\/p\u003e\u003cp\u003eAs part of the actuator's role in your trim tab system, it helps stabilize the boat by counteracting aerodynamic forces while underway and by supporting more efficient engine operation. Proper trim tab adjustment through this actuator can improve stability, handling, and ride quality, in addition to helping the boat get on plane more efficiently. This is a standard-size unit; Bennett also offers the A1101A as the standard configuration alongside an external-line version for installations where the transom interior is inaccessible, and a compact version for space-limited installations, so it is worth confirming your current actuator style before ordering.\u003c\/p\u003e\u003cp\u003eThis is a replacement hydraulic actuator only, not a complete trim tab kit or hydraulic power unit. It is intended for boaters replacing an existing worn or failing actuator on a compatible Bennett trim tab setup rather than installing trim tabs for the first time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500843500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon and fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Standard and sport trim tab units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285314500\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for standard and sport tab units. Review your current trim tab setup and actuator requirements to confirm compatibility before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett 6BT500843500 trim tab actuator do?\u003c\/strong\u003e This hydraulic trim tab actuator works with your boat's hydraulic power unit to control trim tab movement, adjusting your boat's pitch based on speed, load distribution, and water conditions for improved handling and performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full trim tab system or a replacement part?\u003c\/strong\u003e The Bennett 6BT500843500 is a replacement hydraulic actuator only, not a complete trim tab system. It is meant to replace a worn or malfunctioning trim tab cylinder on a compatible Bennett setup, not to install trim tabs for the first time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trim tab systems is this actuator designed for?\u003c\/strong\u003e This actuator is designed for standard and sport tab units. Check your current trim tab setup and actuator requirements before ordering to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Bennett 6BT500843500 actuator?\u003c\/strong\u003e It measures 13.75 inches, making it a standard-size hydraulic actuator for Bennett trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab actuator weigh?\u003c\/strong\u003e The Bennett 6BT500843500 hydraulic trim tab actuator weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this actuator made from?\u003c\/strong\u003e The Bennett 6BT500843500 is built as a nylon and fiberglass hydraulic cylinder, described by Bennett as strong but flexible for marine trim tab use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this actuator improve boat performance?\u003c\/strong\u003e By providing precise trim tab control, this actuator helps manage your boat's running attitude, which can improve stability, handling, ride quality, and overall engine efficiency.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this actuator include external hydraulic hoses?\u003c\/strong\u003e No. This standard actuator design routes fluid through a concealed passage in the upper hinge, so hydraulic lines are not exposed as external hoses subject to damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other versions of this Bennett actuator?\u003c\/strong\u003e Yes. The 6BT500843500 is the standard-size actuator; Bennett also makes an external-line version for installations where the inside of the transom is inaccessible, and a compact version for space-limited installations, so confirm which style your boat needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this actuator work on its own or does it need other components?\u003c\/strong\u003e This actuator works together with your boat's existing hydraulic power unit to move the trim tabs; it is a replacement cylinder and is not a standalone power source.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449979099,"sku":"BEN-A1101A","price":106.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/A1101__44247.1737829694.500.750.jpg?v=1785163390"},{"product_id":"bennett-a-1115-actuator-lower-hinge-pin-for-trim-tab-actuators","title":"Bennett A-1115 Actuator Lower Hinge Pin for Trim Tab Actuators","description":"\u003cp\u003eThe Bennett A-1115 Actuator Lower Hinge Pin is a replacement lower hinge pin for Bennett trim tab actuators. Bennett actuators are built as strong but flexible nylon\/fiberglass hydraulic cylinders, and their piston-like arms push the trim tabs into position as hydraulic pressure is applied. A key design feature of the Bennett actuator is that fluid flows through a concealed hole in the upper hinge at the top of the actuator, which eliminates the need for external hoses that would otherwise be subject to damage. The lower hinge pin is the pivot point at the base of the actuator assembly, allowing the actuator to move as the trim tab is raised and lowered.\u003c\/p\u003e\u003cp\u003eBennett offers its actuators in a few configurations to suit different installation needs: the A1101A is the standard actuator, the A1101EX is built with an external line connection for situations where the interior of the transom is totally inaccessible, and the A1200S is designed for installations where space is limited. The A-1115 lower hinge pin is a maintenance and repair part for keeping an existing Bennett actuator in working order without replacing the entire assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e A-1115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Actuator Lower Hinge Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285315804\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBennett trim tab actuators\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNot specified\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett A-1115 Actuator Lower Hinge Pin used for?\u003c\/strong\u003e The Bennett A-1115 is a lower hinge pin used to service and repair Bennett trim tab actuators, providing the pivot point at the base of the actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the A-1115 a complete actuator or a repair part?\u003c\/strong\u003e It is a repair part, not a complete actuator. The Bennett A-1115 replaces just the lower hinge pin on an existing Bennett actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do Bennett actuators route fluid through the upper hinge instead of external hoses?\u003c\/strong\u003e Bennett actuators are designed with a concealed fluid passage through the upper hinge at the top of the actuator, which eliminates external hoses that would otherwise be exposed to damage. The A-1115 lower hinge pin services the opposite end of this same actuator design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are Bennett actuators made from?\u003c\/strong\u003e Bennett actuators, which the A-1115 lower hinge pin services, are built as strong but flexible nylon\/fiberglass hydraulic cylinders with piston-like arms that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the A1101A, A1101EX, and A1200S Bennett actuators?\u003c\/strong\u003e The A1101A is Bennett's standard actuator, the A1101EX uses an external line connection for cases where the inside of the transom is totally inaccessible, and the A1200S is designed for installations where space is limited. The A-1115 lower hinge pin is a service part for the Bennett actuator line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett A-1115 Actuator Lower Hinge Pin weigh?\u003c\/strong\u003e The Bennett A-1115 Actuator Lower Hinge Pin weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes replacing the lower hinge pin require removing the whole actuator?\u003c\/strong\u003e The A-1115 is intended to service the lower hinge of an existing Bennett actuator; review your current trim tab actuator setup and replacement needs before ordering to confirm the correct repair approach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the product UPC for the Bennett A-1115 hinge pin?\u003c\/strong\u003e The Bennett A-1115 Actuator Lower Hinge Pin carries UPC 666285315804.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the A-1115 fit any Bennett actuator model?\u003c\/strong\u003e The A-1115 is designed as a lower hinge pin for Bennett trim tab actuators; check your existing actuator model, such as the A1101A, A1101EX, or A1200S, before ordering to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat function does the lower hinge pin serve on a Bennett actuator?\u003c\/strong\u003e The lower hinge pin, such as the Bennett A-1115, forms the pivot connection at the base of the actuator, allowing the piston-like arm to move as it pushes the trim tab into position.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450241243,"sku":"BEN-A1115","price":1.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/A1115__02077.1737829815.500.750.jpg?v=1785163391"},{"product_id":"bennett-marine-bolt-electric-trim-tab-actuator-black-nylon-universal-fit-for-bolt-trim-tab-systems-6bt500120200","title":"Bennett Marine BOLT Electric Trim Tab Actuator, Black Nylon, Universal Fit for BOLT Trim Tab Systems (6BT500120200)","description":"\u003cp\u003eThe Bennett Marine BOLT Electric Trim Tab Actuator is a water-tight, black nylon electric actuator built for Bennett BOLT electric trim tab systems. It is engineered with a seal design that draws on over 50 years of Bennett's experience in trim system design, keeping wiring and internal seals fully protected from the marine environment so the actuator resists leakage and marine growth over time.\u003c\/p\u003e\u003cp\u003eInstallation is fast and straightforward: the actuator arrives ready to mount and does not need to be assembled before it goes on the boat, which keeps replacement or upgrade jobs simple. It is designed to fit Bennett BOLT Electric Trim Tab controls with a universal fit, making it a straightforward match for boats already running a BOLT electric trim tab system, including boats equipped with Bennett's BOLT trim tab kits that use this same actuator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500120200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for Bennett BOLT Electric Trim Tab control systems\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett BOLT Electric Trim Tab Actuator (6BT500120200) used for?\u003c\/strong\u003e It is the electric actuator that drives a Bennett BOLT electric trim tab system, moving the trim tab up and down in response to the control switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett BOLT Electric Trim Tab Actuator include mounting plates and wiring harnesses?\u003c\/strong\u003e This listing is the actuator itself (part number 6BT500120200); the full Bennett BOLT trim tab kits separately include stainless steel trim planes, mounting plates, and wiring harnesses along with this actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the actuator body made of?\u003c\/strong\u003e The Bennett BOLT Electric Trim Tab Actuator uses a water-tight black nylon housing designed for trouble-free operation in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this actuator work with my existing Bennett BOLT trim tab kit?\u003c\/strong\u003e Yes, the 6BT500120200 actuator is designed with a universal fit for Bennett BOLT Electric Trim Tab controls, making it suitable for replacing an actuator in an existing BOLT system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT Electric Trim Tab Actuator weigh?\u003c\/strong\u003e The actuator weighs 3.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to disassemble the actuator before installing it?\u003c\/strong\u003e No, the Bennett BOLT Electric Trim Tab Actuator installs without needing to be taken apart, which keeps the installation fast and simple.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps this actuator from leaking or growing marine growth over time?\u003c\/strong\u003e Its wires and seals are fully protected from the harsh marine environment, and the seal design is built on Bennett's decades of hydraulic and electric trim system experience to prevent leakage and marine growth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett BOLT Electric Trim Tab Actuator sold as a single unit or a pair?\u003c\/strong\u003e The 6BT500120200 is sold as a single actuator; Bennett BOLT trim tab kits use two of these actuators, one per trim tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this actuator?\u003c\/strong\u003e The Bennett BOLT Electric Trim Tab Actuator is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this actuator replace a failed actuator in a BOLT system without buying a whole new kit?\u003c\/strong\u003e Yes, since 6BT500120200 is the standalone actuator used in Bennett BOLT trim tab kits, it can be purchased on its own to replace a damaged unit rather than replacing the entire kit.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450405083,"sku":"BEN-BEA2000","price":241.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-BEA2000__77569.1725652294.500.750.jpg?v=1785163391"},{"product_id":"bennett-6bt500136000-lenco-to-bolt-trim-tab-actuator-conversion-kit","title":"Bennett 6BT500136000 Lenco to BOLT Trim Tab Actuator Conversion Kit","description":"\u003cp\u003eThe Bennett 6BT500136000 Lenco to BOLT Trim Tab Actuator Conversion Kit gives boat owners a cost effective, quick, and easy way to convert an existing Lenco trim tab system over to Bennett's electric BOLT actuators. Instead of replacing the entire trim tab system, this kit lets you keep your existing trim tab blades and simply swap out the Lenco actuators for Bennett BOLT actuators using the same mounting holes already in the transom, with no new holes to drill.\u003c\/p\u003e\u003cp\u003eThe kit is designed for plug-n-play connection to your existing standard Lenco controls, so the switch to Bennett actuators does not require rewiring your control panel or switches. It is compatible with Lenco Standard Mount, Standard Performance, and Edge Mount trim tab systems, covering the most common Lenco actuator configurations found on trailered and small to mid-size boats.\u003c\/p\u003e\u003cp\u003eBennett positions this conversion around the long-term reliability of its electric actuators compared to older Lenco units, backing the BOLT actuators in this kit with a lifetime limited warranty. Installation is straightforward for anyone comfortable with basic hand tools, since the actuators bolt directly into the existing hardware locations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500136000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator Conversion Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Lenco Standard Mount, Standard Performance, and Edge Mount trim tab systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Plug-n-play with existing standard Lenco controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Uses existing mounting holes, no new holes to drill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600085\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLenco Standard Mount trim tab systems\u003c\/li\u003e\n\u003cli\u003eLenco Standard Performance trim tab systems\u003c\/li\u003e\n\u003cli\u003eLenco Edge Mount trim tab systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett 6BT500136000 Lenco to BOLT Conversion Kit actually convert?\u003c\/strong\u003e It converts an existing Lenco trim tab system over to Bennett BOLT electric actuators, replacing only the Lenco actuators while the existing trim tab blades stay in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need to drill new holes to install this conversion kit?\u003c\/strong\u003e No new holes are needed. The Bennett 6BT500136000 kit is designed to use the existing mounting holes from the Lenco actuators, so the Bennett BOLT actuators bolt directly into place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Lenco trim tab systems is this kit compatible with?\u003c\/strong\u003e This kit works with Lenco Standard Mount, Standard Performance, and Edge Mount trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to rewire my existing trim tab controls after installing this kit?\u003c\/strong\u003e No rewiring is required. The Bennett 6BT500136000 kit connects plug-n-play to your existing standard Lenco controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace my trim tab blades along with the actuators?\u003c\/strong\u003e No, the existing trim tab blades are kept in place with this conversion kit; only the Lenco actuators are replaced with Bennett BOLT actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett 6BT500136000 conversion kit weigh?\u003c\/strong\u003e The kit weighs 8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT actuators in this conversion kit?\u003c\/strong\u003e The Bennett BOLT actuators included in the 6BT500136000 conversion kit are backed by a lifetime limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy switch from Lenco actuators to Bennett BOLT actuators?\u003c\/strong\u003e Bennett markets its BOLT electric actuators as exceptionally durable and dependable, and unlike the original Lenco actuators, they are backed by a lifetime limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit a full trim tab replacement or just the actuators?\u003c\/strong\u003e The 6BT500136000 kit replaces only the actuators; it is not a full trim tab blade replacement, since the existing tabs are retained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be installed without professional help?\u003c\/strong\u003e The plug-n-play connection to existing Lenco controls and the use of existing mounting holes make the Bennett 6BT500136000 kit straightforward to install for owners comfortable with basic hand tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Bennett Lenco to BOLT Conversion Kit?\u003c\/strong\u003e The UPC for the Bennett 6BT500136000 Lenco to BOLT Conversion Kit is 666285600085.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450962139,"sku":"BEN-BOLTLKCON","price":384.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-BOLTLKCON__56263.1739460337.500.750.jpg?v=1785163395"},{"product_id":"bennett-hydraulic-to-bolt-electric-trim-tab-conversion-kit-6bt500404200","title":"Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit 6BT500404200","description":"\u003cp\u003eThe Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit (6BT500404200) lets you upgrade from standard Bennett hydraulic trim tab actuators to Bennett's BOLT electric actuators without rewiring your boat or drilling new holes. The kit is built to reuse your existing wiring, rocker switch, and trim planes, so the conversion goes in using components you already have installed. It connects with a plug 'n play fit to your existing standard Bennett rocker switch, and it works with standard Bennett hydraulic single actuator systems, including the A1101A and A1101ARC.\u003c\/p\u003e\u003cp\u003eEach kit includes two 12V BOLT actuators with 6 ft wire harnesses, two adjustable upper hinges, a relay module with built-in Auto Tab Retraction (ATR), two lower hinges, and a hardware bag. The Auto Tab Retraction feature automatically retracts the tabs when the ignition is turned off, and the relay module includes a diagnostics feature that simplifies both installation and troubleshooting down the road. Bennett's BOLT actuators are fully waterproof, submersible, and maintenance-free once installed.\u003c\/p\u003e\u003cp\u003eThis conversion kit is backed by Bennett's lifetime limited warranty on the BOLT actuators. It is intended for boat owners who already run a standard Bennett hydraulic trim tab system and want the reliability of electric BOLT actuators without replacing their trim planes or control switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500404200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285600276\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Standard Bennett hydraulic single actuator systems (A1101A and A1101ARC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime limited warranty (Bennett BOLT actuators)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e 2 BOLT 12V actuators with 6 ft wire harnesses, 2 adjustable upper hinges, 1 relay module with built-in Auto Tab Retraction, 2 lower hinges, 1 hardware bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit do?\u003c\/strong\u003e This conversion kit allows you to convert from standard Bennett hydraulic trim tab actuators to Bennett BOLT electric actuators. It is designed to simplify the upgrade process while allowing you to continue using key existing trim tab components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to rewire my boat or drill new holes to install this kit?\u003c\/strong\u003e No, the Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit is designed so no rewiring or drilling of new holes is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich existing components can I reuse with this conversion kit?\u003c\/strong\u003e This conversion kit is designed to use your existing wiring, rocker switch, and trim planes, which helps make the conversion faster and avoids unnecessary replacement of compatible components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Bennett hydraulic actuator systems is the 6BT500404200 conversion kit compatible with?\u003c\/strong\u003e This kit is compatible with standard Bennett hydraulic single actuator systems, specifically the A1101A and A1101ARC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this conversion kit?\u003c\/strong\u003e The kit includes two 12V BOLT actuators with 6 ft wire harnesses, two adjustable upper hinges, one relay module with built-in Auto Tab Retraction, two lower hinges, and a hardware bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the conversion kit include a trim tab control?\u003c\/strong\u003e No, this kit uses your existing standard Bennett rocker switch through a plug 'n play connection; a BOLT-style control is sold separately if you want to upgrade the control unit as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Auto Tab Retraction and does this kit have it?\u003c\/strong\u003e Yes, the relay module included with the Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit is equipped with Auto Tab Retraction, which automatically retracts the tabs when the ignition is turned off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this conversion kit waterproof?\u003c\/strong\u003e Yes, the Bennett BOLT actuators included in this kit are completely waterproof, submersible, and maintenance-free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT conversion kit?\u003c\/strong\u003e The Bennett BOLT actuators included with this conversion kit are backed by Bennett's lifetime limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the diagnostics feature on this kit work?\u003c\/strong\u003e The relay module included with the 6BT500404200 conversion kit has a built-in diagnostics feature that helps simplify installation and troubleshooting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this conversion kit weigh?\u003c\/strong\u003e The Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit weighs 9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I still use my current trim planes after installing this kit?\u003c\/strong\u003e Yes, this conversion kit is designed to work with your existing trim planes, so they do not need to be replaced during the upgrade to BOLT electric actuators.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451158747,"sku":"BEN-HYDBOLTCON","price":376.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-HYDBOLTCON__80556.1722500625.500.750.jpg?v=1785163398"},{"product_id":"lenco-101-standard-replacement-trim-tab-actuator-oem-20400-001-750-lb-push-12v","title":"Lenco 101 Standard Replacement Trim Tab Actuator, OEM 20400-001, 750 lb Push, 12V","description":"\u003cp\u003eThe Lenco 15054-001 101 Standard Replacement Trim Tab Actuator is a fully submersible, maintenance-free electric actuator built to drive trim tab movement so a boat's running attitude, stability, and ride quality can be adjusted on the water. It replaces the actuator on compatible standard Lenco trim tab systems and is engineered to deliver 750 lbs (340.18 kg) of push force from a 12V high-torque motor, roughly twice the force of a comparable hydraulic actuator. A self-locking stainless steel ball screw riding on 12 bearings holds tab position precisely without drift, so no separate limit switches or clutches are needed. Construction pairs a high-impact, UV-resistant Nylon 66 housing with a stainless steel ram and a corrosion-proof Vandar top cap, and the assembly seals for life so it operates underwater in both saltwater and freshwater without lubrication or upkeep. Waterproof Deutsch connectors give a watertight, plug-and-play electrical connection, and precision-molded, powdered-metal, high-alloy gears are built for long-term wear resistance and accuracy. The actuator has a 2-1\/4 inch stroke length, a 12-1\/8 inch overall tip-to-tip length, a 6 foot wire, and 5\/16 inch top cap and end holes, with all necessary mounting hardware included for installation. It is backed by a 5-year limited warranty covering defects in materials and workmanship.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15054-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 20400-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Load:\u003c\/strong\u003e 750 lbs (340.18 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (Tip-to-Tip):\u003c\/strong\u003e 12-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-impact Nylon 66 housing with stainless steel components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Lenco Standard Trim Tab Kits, Performance Trim Tab Kits, Bennett Retrofit Kits, SeaDoo Kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Lenco 15054-001 actuator is designed to fit Lenco Standard Trim Tab Kits, Performance Trim Tab Kits, Bennett Retrofit Kits, and SeaDoo Kits. Review your current trim tab setup and part numbers to confirm compatibility before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20400-001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15054-001 101 Standard Replacement Trim Tab Actuator do?\u003c\/strong\u003e The Lenco 15054-001 101 Standard Replacement Trim Tab Actuator controls trim tab movement to adjust a boat's running attitude, stability, and ride quality, and it is designed as a replacement actuator for standard Lenco trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich trim tab systems is the 15054-001 actuator compatible with?\u003c\/strong\u003e The Lenco 15054-001 actuator is designed to fit Lenco Standard Trim Tab Kits, Performance Trim Tab Kits, Bennett Retrofit Kits, and SeaDoo Kits. Review your current trim tab setup and part numbers to confirm compatibility before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much push force does this actuator produce?\u003c\/strong\u003e This actuator delivers 750 lbs (340.18 kg) of push force from its 12V high-torque motor, about twice the force of a typical hydraulic trim tab actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM cross-reference number for the Lenco 15054-001 actuator?\u003c\/strong\u003e The Lenco 15054-001 101 Standard Replacement Trim Tab Actuator corresponds to OEM part number 20400-001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator suitable for both saltwater and freshwater use?\u003c\/strong\u003e Yes. The 15054-001 actuator features a corrosion-proof, watertight Vandar top cap, stainless steel components, and a high-impact, UV-resistant Nylon 66 housing, making it well suited to both saltwater and freshwater conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the stroke length and overall dimensions of this actuator?\u003c\/strong\u003e The Lenco 101 Standard Replacement Trim Tab Actuator has a 2-1\/4 inch stroke length and a 12-1\/8 inch overall tip-to-tip length, with a 6 foot wire and 5\/16 inch top cap and end holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replacement actuator include mounting hardware?\u003c\/strong\u003e Yes. All necessary mounting hardware is included with the Lenco 15054-001 actuator for a straightforward installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials is the Lenco 101 actuator made from, and is it corrosion-resistant?\u003c\/strong\u003e The actuator features a high-impact, UV-resistant Nylon 66 housing, a corrosion-proof Vandar top cap, and a stainless steel ram, making it highly durable and resistant to marine environmental wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15054-001 actuator have a built-in position sensor?\u003c\/strong\u003e No, the Lenco 101 Standard Replacement Trim Tab Actuator does not have a built-in position sensor. Instead, a self-locking stainless steel ball screw locks the tab into position and prevents drift, giving precise control without needing a sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my current trim tab actuator needs to be replaced?\u003c\/strong\u003e Signs that a trim tab actuator needs replacement include difficulty adjusting trim, persistent listing, slow or unresponsive tab movement, erratic behavior, grinding or humming noises without movement, and visible corrosion or fluid leaks. If checking electrical connections and mounting brackets does not resolve the issue, a replacement actuator like the Lenco 15054-001 restores proper trim performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator covered under warranty?\u003c\/strong\u003e Yes, the Lenco 15054-001 actuator is backed by a 5-year limited warranty covering defects in materials and workmanship under normal usage and maintenance conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does the 15054-001 actuator use for wiring?\u003c\/strong\u003e The Lenco 101 Standard Replacement Trim Tab Actuator uses waterproof, plug-and-play Deutsch connectors that provide a watertight seal and simplify installation.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995042011,"sku":"LEN-15054-001","price":256.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15054-001-standard-electric-replacement-trim-tab-actuator__82291.1744119043.500.750.jpg?v=1785164599"},{"product_id":"lenco-101xd-replacement-trim-tab-actuator-oem-20401-001-500-lb-push-5-16-inch-mount","title":"Lenco 101XD Replacement Trim Tab Actuator, OEM 20401-001, 500 lb Push, 5\/16 Inch Mount","description":"\u003cp\u003eThe Lenco 101XD Replacement Trim Tab Actuator (15055-001) is a 12V ballscrew actuator built to control trim tab movement so you can dial in your boat's running attitude, stability, and ride quality. Its ballscrew design is twice as powerful as a typical hydraulic actuator, and the high-torque motor delivers 500 lbs of push force for consistent, instant response. Precision molded, powdered metal, high-alloy gears provide high accuracy, high wear resistance, and long service life, while a molded-in thrust bearing keeps movement smooth under load.\u003c\/p\u003e\u003cp\u003eBuilt for marine use, the 101XD features an improved O-ring design with an integrated wiper seal and a waterproof Deutsch connector that eliminates water intrusion and allows plug-and-play installation. Construction upgrades include a stronger top cap mounting clevis, pressure-tight Torx screws, a thicker and stronger motor housing wall, an over-molded cable for a tighter seal, and an upper mounting bracket with a gland seal. The housing is made from high-impact, ultraviolet-resistant nylon for durability in sun and saltwater exposure.\u003c\/p\u003e\u003cp\u003eThis actuator has a 2-1\/4 inch stroke length, an 11-3\/8 inch overall tip-to-tip length, and 5\/16 inch top and end mounting holes. It ships with all necessary mounting hardware and a 6 foot wire for a complete installation. It is designed as a replacement actuator for compatible Lenco trim tab systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15055-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Load:\u003c\/strong\u003e 500 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (Tip-to-Tip):\u003c\/strong\u003e 11-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-impact, ultraviolet-resistant nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 13.5 x 3.8 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003209\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 20401-001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Lenco 101XD Replacement Trim Tab Actuator is designed as a replacement actuator for compatible Lenco trim tab systems using 5\/16 inch top and end mounting holes.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20401-001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15055-001 101XD Replacement Trim Tab Actuator do?\u003c\/strong\u003e The Lenco 101XD Replacement Trim Tab Actuator controls trim tab movement to help adjust a boat's running attitude, stability, and ride quality, and it is designed as a replacement actuator for compatible Lenco trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 101XD actuator built for marine environments?\u003c\/strong\u003e Yes, the Lenco 15055-001 actuator is built for marine use with a waterproof design, an improved O-ring seal, an integrated wiper seal, and a waterproof Deutsch connector to help prevent water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this replacement actuator include mounting hardware?\u003c\/strong\u003e Yes, the Lenco 101XD actuator (15055-001) includes the necessary mounting hardware along with a 6 foot wire for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much push force does the Lenco 101XD actuator produce?\u003c\/strong\u003e The 15055-001 actuator's high-torque motor delivers 500 lbs of push force, using a ballscrew design that is twice as powerful as a typical hydraulic actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the key dimensions of the Lenco 15055-001 actuator?\u003c\/strong\u003e This 12V actuator has a 2-1\/4 inch stroke length, an 11-3\/8 inch overall tip-to-tip length, 5\/16 inch top and end mounting holes, and a 6 foot wire length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size mounting holes does the 101XD actuator use?\u003c\/strong\u003e The Lenco 101XD actuator, part number 15055-001, uses 5\/16 inch top and end mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat design features help improve the performance of this actuator?\u003c\/strong\u003e The 101XD uses a ballscrew design along with precision molded high-alloy gears, a stronger top cap mounting clevis, thicker motor housing walls, pressure-tight Torx screws, and an over-molded cable for a tighter seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 101XD actuator's OEM cross reference number?\u003c\/strong\u003e The Lenco 15055-001 101XD actuator's OEM part number is 20401-001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Lenco 15055-001 actuator?\u003c\/strong\u003e The Lenco 101XD Replacement Trim Tab Actuator is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15055-001 actuator weigh?\u003c\/strong\u003e The Lenco 101XD Replacement Trim Tab Actuator weighs 4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lenco 101XD actuator housing made from?\u003c\/strong\u003e The 15055-001 actuator features a high-impact, ultraviolet-resistant nylon housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Lenco 101XD actuator seal against water intrusion?\u003c\/strong\u003e The 15055-001 actuator uses an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector, plus an over-molded cable and a gland-sealed upper mounting bracket.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995074779,"sku":"LEN-15055-001","price":310.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15055-001-101xd5-electric-replacement-trim-tab-actuator__53705.1744119121.500.750.jpg?v=1785164599"},{"product_id":"lenco-101xd-replacement-trim-tab-actuator-15056-001-12v-3-8-inch-hardware-oem-20401-002","title":"Lenco 101XD Replacement Trim Tab Actuator 15056-001, 12V, 3\/8 Inch Hardware, OEM 20401-002","description":"\u003cp\u003eThe Lenco 101XD Replacement Trim Tab Actuator (part number 15056-001) is a direct-fit replacement actuator for compatible Lenco 101XD trim tab systems using 3\/8 inch top and end hole hardware. It replaces the trim tab actuator that controls the up\/down movement of a boat's trim tabs, helping adjust running attitude, stability, and ride quality.\u003c\/p\u003e\u003cp\u003eLenco actuators are built to be durable and maintenance-free. Precision-molded, powdered-metal, high-alloy gears deliver high accuracy, high wear resistance, and long service life. The ball screw design makes this actuator twice as powerful as a typical hydraulic actuator, and its high-torque 12V motor is rated to push 500 lbs. Construction upgrades include a stronger top cap mounting clevis, pressure-tight Torx screws, a molded-in thrust bearing, a thicker motor housing wall, an over-molded cable for a tighter seal, and an upper mounting bracket with a gland seal.\u003c\/p\u003e\u003cp\u003eBuilt for marine environments, this actuator uses an improved O-ring design with an integrated wiper seal, along with a waterproof Deutsch connector that eliminates the possibility of water intrusion and allows for easy plug-and-play installation. The housing is high-impact, ultraviolet-resistant nylon. The kit includes all necessary mounting hardware and a 6 foot wire, and the actuator has a 3\/8 inch top hole and 3\/8 inch end hole.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15056-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tip-to-Tip:\u003c\/strong\u003e 11-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Force:\u003c\/strong\u003e 500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.42 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-impact, ultraviolet resistant nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 20401-002\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned as a replacement actuator for compatible Lenco 101XD trim tab systems that use 3\/8 inch top and end hole hardware\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20401-002\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15056-001 101XD actuator do?\u003c\/strong\u003e It controls the up and down movement of a boat's trim tabs to adjust running attitude, stability, and ride quality, and it is designed as a replacement actuator for compatible Lenco 101XD trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM number does part 15056-001 cross to?\u003c\/strong\u003e The Lenco 101XD Replacement Trim Tab Actuator, part number 15056-001, crosses to OEM part number 20401-002.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator built to handle marine conditions?\u003c\/strong\u003e Yes, the 15056-001 actuator is built for marine use with an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector that prevents water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15056-001 kit come with mounting hardware?\u003c\/strong\u003e Yes, the kit includes all necessary mounting hardware along with a 6 foot wire for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size top and end holes does this actuator have?\u003c\/strong\u003e The 15056-001 actuator has a 3\/8 inch top hole and a 3\/8 inch end hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much force can the 101XD actuator push?\u003c\/strong\u003e This 12V actuator has a high-torque motor rated to push 500 lbs, using a ball screw design that is twice as powerful as a typical hydraulic actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length of the Lenco 15056-001 actuator?\u003c\/strong\u003e It measures 11-3\/8 inches overall, tip-to-tip, with a 2-1\/4 inch stroke length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 101XD actuator weigh?\u003c\/strong\u003e The 15056-001 actuator weighs 3.42 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the actuator housing made of?\u003c\/strong\u003e The 101XD actuator, part 15056-001, uses a high-impact, ultraviolet resistant nylon housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Lenco part or an aftermarket copy?\u003c\/strong\u003e Part number 15056-001 is the genuine Lenco 101XD replacement actuator, cross-referenced to OEM part 20401-002.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat construction upgrades does the 101XD actuator have over older designs?\u003c\/strong\u003e It features a stronger top cap mounting clevis, pressure-tight Torx screws, a molded-in thrust bearing, a thicker motor housing wall, an over-molded cable, and an upper mounting bracket with a gland seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the electrical connection protected from water?\u003c\/strong\u003e The 15056-001 actuator uses a waterproof Deutsch connector, which eliminates the possibility of water intrusion and allows for easy plug-and-play installation.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995107547,"sku":"LEN-15056-001","price":310.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15056-001-101xd-electric-replacement-trim-tab-actuator__93673.1744119184.500.750.jpg?v=1785164599"},{"product_id":"lenco-15057-001-101xds-short-trim-tab-actuator-12v-5-16-inch-replaces-oem-200402-001","title":"Lenco 15057-001 101XDS Short Trim Tab Actuator, 12V 5\/16 inch, Replaces OEM 200402-001","description":"\u003cp\u003eThe Lenco 15057-001 101XDS Short Replacement Trim Tab Actuator is a 12V ball-screw actuator that drives trim tab movement to help adjust a boat's running attitude, stability, and ride quality. It is built as a direct replacement actuator for compatible Lenco trim tab systems originally equipped with OEM part number 200402-001, and it is the short-length, 5\/16 inch version of Lenco's actuator line, sized for OEM-specific kits and limited-space installations.\u003c\/p\u003e\u003cp\u003eLenco's ball-screw design is twice as powerful compared to typical hydraulic actuators and is engineered to be durable and maintenance-free. Precision-molded, powdered-metal, high-alloy gears deliver high accuracy, high wear resistance, and long service life, while a tough, high-torque 12V motor easily pushes 750 lbs. Construction features include a stronger top cap mounting clevis design, pressure-tight Torx screws, a molded-in thrust bearing, a thicker and stronger motor housing wall, an over-molded cable for a tighter seal, and an upper mounting bracket with a gland seal.\u003c\/p\u003e\u003cp\u003eBuilt for marine environments, this actuator has an improved O-ring design and an integrated wiper seal, and its waterproof Deutsch connector eliminates the possibility of water intrusion for easy plug-and-play installation. The housing is high-impact, ultraviolet-resistant nylon. The kit includes all necessary mounting hardware along with a 6 foot wire, and the actuator has a 5\/16 inch top and end hole.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15057-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 101XDS Short Replacement Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 200402-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Force:\u003c\/strong\u003e 750 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (Tip-to-Tip):\u003c\/strong\u003e 10-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-impact, ultraviolet-resistant nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Waterproof Deutsch connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware Included:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis actuator is designed as a replacement for compatible Lenco trim tab systems that originally used OEM part number 200402-001. It is the short, 5\/16 inch top and end hole version with a 10-7\/8 inch overall tip-to-tip length, intended for OEM-specific kits and limited-space applications.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e200402-001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15057-001 101XDS Short Trim Tab Actuator do?\u003c\/strong\u003e The Lenco 101XDS Short Replacement Trim Tab Actuator (part 15057-001) controls trim tab movement to help adjust a boat's running attitude, stability, and ride quality, and is designed as a replacement actuator for compatible Lenco trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 15057-001 actuator compatible with OEM part number 200402-001?\u003c\/strong\u003e Yes. The Lenco 15057-001 101XDS Short Actuator is built as a replacement for actuators originally equipped with OEM part 200402-001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the push force of this actuator?\u003c\/strong\u003e The Lenco 101XDS Short Actuator has a high-torque 12V motor designed to deliver 750 lbs of push force.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the top cap and end hole sizes on the 101XDS Short actuator?\u003c\/strong\u003e The 15057-001 has 5\/16 inch top cap and end holes, distinguishing it from Lenco's 3\/8 inch actuator variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Lenco 15057-001 actuator overall?\u003c\/strong\u003e This actuator measures 10-7\/8 inches overall, tip-to-tip, with a 2-1\/4 inch stroke length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator waterproof and suitable for marine use?\u003c\/strong\u003e Yes. The 101XDS Short Actuator is built for marine environments with an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector that eliminates the possibility of water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15057-001 actuator come with mounting hardware and a wire?\u003c\/strong\u003e Yes. This trim tab actuator kit includes all necessary mounting hardware along with a 6 foot wire for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lenco 101XDS Short Actuator housing made from?\u003c\/strong\u003e The housing uses high-impact, ultraviolet-resistant nylon along with a thicker, stronger motor housing wall for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ball-screw design of this actuator compare to hydraulic actuators?\u003c\/strong\u003e Lenco's ball-screw design used in the 101XDS Short Actuator is twice as powerful compared to typical hydraulic actuators and is built to be durable and maintenance-free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the 15057-001 trim tab actuator require?\u003c\/strong\u003e The Lenco 101XDS Short Actuator operates on 12V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 101XDS Short Actuator and the standard 101XD Actuator?\u003c\/strong\u003e The 101XDS Short Actuator (15057-001) has 5\/16 inch top and end holes, a 10-7\/8 inch overall length, and a 750 lb push force, while the standard 101XD Actuator has 3\/8 inch top and end holes, an 11-3\/8 inch overall length, and a 500 lb push force; they are separate parts for different mounting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat design features improve the reliability of the 15057-001 actuator?\u003c\/strong\u003e The Lenco 101XDS Short Actuator uses precision-molded, high-alloy gears, a stronger top cap mounting clevis design, pressure-tight Torx screws, a molded-in thrust bearing, and an over-molded cable for a tighter seal.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995140315,"sku":"LEN-15057-001","price":310.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15057-001-101xds-short-electric-replacement-trim-tab-actuator__60669.1744119352.500.750.jpg?v=1785164599"},{"product_id":"lenco-101xds-short-replacement-trim-tab-actuator-12v-oem-20402-002-3-8-inch-hardware","title":"Lenco 101XDS Short Replacement Trim Tab Actuator, 12V, OEM 20402-002, 3\/8 Inch Hardware","description":"\u003cp\u003eThe Lenco 101XDS Short Replacement Trim Tab Actuator (part number 15058-001) is a 12V electric actuator built to replace the actuator on compatible Lenco trim tab systems. It uses Lenco's ball screw design, which the manufacturer states is twice as powerful compared to typical hydraulic actuators and more reliable in service. A high-torque 12V motor pushes 500 lbs, giving the trim tabs durable, instant response without the maintenance demands of a hydraulic system.\u003c\/p\u003e\u003cp\u003eConstruction is purpose-built for the marine environment. Precision-molded, powdered-metal, high-alloy gears deliver high accuracy, wear resistance, and strength for long life. The actuator has an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector that eliminates the possibility of water intrusion while allowing easy plug-and-play installation. The housing is molded from high-impact, ultraviolet-resistant nylon.\u003c\/p\u003e\u003cp\u003eConstruction upgrades over earlier designs include a stronger top cap mounting clevis, new and improved pressure-tight Torx screws, a molded-in thrust bearing, a thicker and stronger motor housing wall, an over-molded cable for a tighter seal, and an upper mounting bracket with a gland seal. This actuator has a 3\/8 inch top hole and a 3\/8 inch end hole, a 2-1\/4 inch stroke length, and an overall tip-to-tip length of 10-7\/8 inches. The kit includes all necessary mounting hardware and a 6 foot wire for installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15058-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 20402-002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Force:\u003c\/strong\u003e 500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (Tip-to-Tip):\u003c\/strong\u003e 10-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-impact, ultraviolet-resistant nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Waterproof Deutsch connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003230\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis actuator is designed as a replacement actuator for compatible Lenco trim tab systems.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20402-002\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15058-001 101XDS Short Replacement Trim Tab Actuator do?\u003c\/strong\u003e The Lenco 101XDS Short Replacement Trim Tab Actuator (part 15058-001) controls trim tab movement to adjust a boat's running attitude, stability, and ride quality, and is designed as a replacement actuator for compatible Lenco trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the OEM cross-reference number for this Lenco actuator?\u003c\/strong\u003e The Lenco 101XDS Short Replacement Trim Tab Actuator, part number 15058-001, corresponds to OEM part number 20402-002.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much push force does the 101XDS short actuator produce?\u003c\/strong\u003e 500 lbs of push force is delivered by the high-torque 12V motor in the Lenco 101XDS Short Replacement Trim Tab Actuator (15058-001).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the stroke length and overall dimensions of part 15058-001?\u003c\/strong\u003e This actuator has a 2-1\/4 inch stroke length and an overall tip-to-tip length of 10-7\/8 inches, with a 3\/8 inch top hole and a 3\/8 inch end hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this actuator waterproof and suitable for marine use?\u003c\/strong\u003e Yes, the Lenco 15058-001 actuator is built for marine environments with an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector that helps prevent water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 101XDS short actuator kit include mounting hardware?\u003c\/strong\u003e Yes, the Lenco 101XDS Short Replacement Trim Tab Actuator (15058-001) includes all necessary mounting hardware along with a 6 foot wire for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lenco 101XDS actuator housing made from?\u003c\/strong\u003e The housing on part number 15058-001 is molded from high-impact, ultraviolet-resistant nylon for durability in marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this Lenco trim tab actuator require?\u003c\/strong\u003e 12V is the voltage rating of the Lenco 101XDS Short Replacement Trim Tab Actuator, part 15058-001.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 101XDS actuator wired for installation?\u003c\/strong\u003e A waterproof Deutsch connector is used on the Lenco 15058-001 actuator, making for easy plug-and-play installation with the included 6 foot wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat construction improvements does this actuator have over earlier designs?\u003c\/strong\u003e Part number 15058-001 features a stronger top cap mounting clevis design, pressure-tight Torx screws, a molded-in thrust bearing, a thicker motor housing wall, an over-molded cable, and an upper mounting bracket with a gland seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the ball screw design in this Lenco actuator considered more reliable?\u003c\/strong\u003e The ball screw design used in the Lenco 101XDS Short Replacement Trim Tab Actuator (15058-001) is stated by the manufacturer to be twice as powerful compared to typical hydraulic actuators, resulting in more reliable operation and durable, instant response.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the top cap hole and end hole sizes on this actuator?\u003c\/strong\u003e Both the top cap hole and the end hole on the Lenco 15058-001 actuator measure 3\/8 inch.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995173083,"sku":"LEN-15058-001","price":310.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15058-001-101xds-short-electric-replacement-trim-tab-actuator__67333.1744119514.500.750.jpg?v=1785164599"},{"product_id":"lenco-102s-replacement-trim-tab-actuator-oem-20403-001-4-1-4-inch-stroke-12v","title":"Lenco 102S Replacement Trim Tab Actuator, OEM 20403-001, 4-1\/4 Inch Stroke, 12V","description":"\u003cp\u003eThe Lenco 102S Replacement Trim Tab Actuator (Lenco Part# 15059-001) is a 12V ballscrew actuator built to replace trolling tab systems sold prior to 2000 and other OEM 20403-001 applications. It also cross-references to Sierra Part# STT3701R, making it a straightforward swap for boats running that actuator today. Lenco's ballscrew design is twice as powerful compared to typical hydraulic actuators and is more reliable, giving consistent, instant trim tab response without the maintenance concerns of a hydraulic pump and cylinder system.\u003c\/p\u003e\u003cp\u003eThis actuator's high-torque 12V motor easily pushes 550 lbs, and it uses a waterproof Deutsch connector that eliminates the possibility of water intrusion, making installation a genuine plug-and-play process. A 6 foot cable is included for wiring into your existing trim tab system. The 102S measures 13-3\/8 inches overall length and 2.5 inches overall width, with a 4-1\/4 inch stroke and 5\/16 inch top cap and end holes, so it drops into the mounting geometry of the systems it is designed to replace.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15059-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 20403-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSierra Part Number:\u003c\/strong\u003e STT3701R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 4-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 13-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Force:\u003c\/strong\u003e 550 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003247\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned as a replacement actuator for trolling tab systems sold prior to 2000 and other 20403-001 OEM applications.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eOEM Part# 20403-001; also cross-references to Sierra Part# STT3701R.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 102S Replacement Trim Tab Actuator do?\u003c\/strong\u003e The Lenco 102S Replacement Trim Tab Actuator (part number 15059-001) drives trim tab movement on compatible trolling tab systems, using a 12V ballscrew motor in place of a hydraulic actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 102S actuator compatible with older trim tab systems?\u003c\/strong\u003e Yes. The 15059-001 actuator is designed as a replacement for trolling tab systems sold prior to 2000, as well as other OEM 20403-001 applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part number does the Lenco 102S actuator replace?\u003c\/strong\u003e This actuator replaces OEM Part# 20403-001 and also cross-references to Sierra Part# STT3701R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much stroke does the Lenco 15059-001 actuator have?\u003c\/strong\u003e The Lenco 102S actuator has a 4-1\/4 inch stroke length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Lenco 102S trim tab actuator run on?\u003c\/strong\u003e It is a 12V actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much force can the Lenco 102S actuator push?\u003c\/strong\u003e 550 lbs of push force, delivered by a high-torque motor in the 15059-001 actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 102S actuator come with a cable and connectors for installation?\u003c\/strong\u003e Yes. The 15059-001 actuator includes a 6 foot cable and uses a waterproof Deutsch connector for a plug-and-play installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the top cap and end hole sizes on this actuator?\u003c\/strong\u003e Both the top cap hole and end hole on the Lenco 102S actuator are 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the Lenco 102S actuator?\u003c\/strong\u003e The 15059-001 actuator measures 13-3\/8 inches overall length and 2.5 inches overall width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 102S actuator housing made of?\u003c\/strong\u003e The 102S trim tab actuator is constructed of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ballscrew design in the 102S actuator compare to a hydraulic actuator?\u003c\/strong\u003e The ballscrew design used in the Lenco 15059-001 actuator is twice as powerful compared to a typical hydraulic actuator and is more reliable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 102S actuator sealed against water intrusion?\u003c\/strong\u003e Yes. The 15059-001 actuator uses a waterproof Deutsch connector that eliminates the possibility of water intrusion.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995205851,"sku":"LEN-15059-001","price":310.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15059-001-102s-electric-replacement-trim-tab-actuator__17226.1747363769.500.750.jpg?v=1785164599"},{"product_id":"lenco-102hd-replacement-trim-tab-actuator-4-1-4-inch-stroke-12v-oem-20791-0015","title":"Lenco 102HD Replacement Trim Tab Actuator, 4-1\/4 Inch Stroke, 12V, OEM 20791-0015","description":"\u003cp\u003eThe Lenco 102HD Replacement Trim Tab Actuator (part number 15060-001) is a 12V ball screw actuator built to control trim tab movement on compatible Lenco trim tab systems, helping adjust a boat's running attitude, stability, and ride quality. It is designed for compatible Lenco trim tab systems, including trolling tab systems sold after 2000 and other OEM applications matching OEM part 20791-0015.\u003c\/p\u003e\u003cp\u003eThe actuator uses a ball screw design that Lenco states is twice as powerful and more reliable than typical hydraulic trim tab actuators. A high-torque 12V motor delivers up to 500 lbs of push force with instant response and no routine maintenance required. Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and long service life.\u003c\/p\u003e\u003cp\u003eBuilt specifically for marine environments, the 102HD features an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector to prevent water intrusion, along with a gland seal on the upper mounting bracket. Construction upgrades include a stronger top cap mounting clevis, pressure-tight Torx screws, a molded-in thrust bearing, a thicker motor housing wall, and an over-molded cable for a tighter, more durable seal. The housing is made of high-impact, ultraviolet resistant nylon.\u003c\/p\u003e\u003cp\u003eThis actuator has a 4-1\/4 inch stroke length and measures 13 inches overall, tip-to-tip, with 5\/16 inch top cap and end holes. It ships with a 6 foot wire and includes all necessary mounting hardware for a plug-and-play installation, replacing OEM part number 20791-0015.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15060-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e 20791-0015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Force:\u003c\/strong\u003e 500 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 4-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (Tip-to-Tip):\u003c\/strong\u003e 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Waterproof Deutsch connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-impact, ultraviolet resistant nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003254\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for compatible Lenco trim tab systems, including trolling tab systems sold after 2000 and other OEM applications matching OEM part number 20791-0015.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003e20791-0015\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 102HD Replacement Trim Tab Actuator (15060-001) do?\u003c\/strong\u003e The Lenco 102HD actuator controls trim tab movement to help adjust a boat's running attitude, stability, and ride quality, serving as a replacement actuator for compatible Lenco trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part number 15060-001 replace OEM part 20791-0015?\u003c\/strong\u003e Yes, the Lenco 102HD actuator (15060-001) is designed as a direct replacement for OEM part number 20791-0015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stroke length and overall size of this actuator?\u003c\/strong\u003e The Lenco 102HD actuator has a 4-1\/4 inch stroke length and measures 13 inches overall from tip to tip, with 5\/16 inch top cap and end holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 102HD actuator waterproof and built for marine use?\u003c\/strong\u003e Yes, this actuator is built for marine environments with an improved O-ring design, an integrated wiper seal, and a waterproof Deutsch connector to help prevent water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15060-001 actuator come with mounting hardware?\u003c\/strong\u003e Yes, the kit includes all necessary mounting hardware along with a 6 foot wire for a plug-and-play installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Lenco 102HD trim tab actuator run on?\u003c\/strong\u003e The Lenco 102HD Replacement Trim Tab Actuator (15060-001) is a 12V actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much force does the 102HD actuator generate?\u003c\/strong\u003e A high-torque motor in the Lenco 102HD actuator is designed to deliver up to 500 lbs of push force.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ball screw design compare to a hydraulic trim tab actuator?\u003c\/strong\u003e Lenco's ball screw design used in the 102HD (15060-001) is twice as powerful and more reliable than typical hydraulic trim tab actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trim tab systems is the Lenco 15060-001 actuator compatible with?\u003c\/strong\u003e This actuator is designed for compatible Lenco trim tab systems, including trolling tab systems sold after 2000 and other OEM applications matching OEM part 20791-0015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lenco 102HD actuator housing made of?\u003c\/strong\u003e The housing of the Lenco 102HD Replacement Trim Tab Actuator is made of high-impact, ultraviolet resistant nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sealing features does this actuator use to prevent water intrusion?\u003c\/strong\u003e The 15060-001 actuator features an improved O-ring design, an integrated wiper seal, a waterproof Deutsch connector, and a gland seal on the upper mounting bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 102HD Replacement Trim Tab Actuator weigh?\u003c\/strong\u003e The Lenco 102HD actuator (15060-001) weighs 3.7 pounds.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995238619,"sku":"LEN-15060-001","price":343.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15060-001-102hd-electric-replacement-trim-tab-actuator__17100.1744119726.500.750.jpg?v=1785164599"},{"product_id":"lenco-15064-001-retrofit-kit-for-12v-electric-bennett-trim-tab-systems","title":"Lenco 15064-001 RetroFit Kit for 12V Electric Bennett Trim Tab Systems","description":"\u003cp\u003eThe Lenco 15064-001 RetroFit Kit lets you upgrade a boat equipped with standard length Bennett hydraulic trim tab cylinders to Lenco's 12V electric actuator technology, without any drilling or filling of the transom. Instead of replacing an entire trim tab system, this kit lets you discard the Bennett hydraulic pump unit and the two Bennett cylinders, then install two Lenco electric actuators in their place using the existing trim planes.\u003c\/p\u003e\u003cp\u003eEach kit includes two Bennett-compatible Lenco electric actuators with 6' leads, two new-style upper mounting brackets, a switch wiring kit with jumper wires for connecting to your existing switch harness, and all necessary mounting hardware. Complete installation instructions are included, and the actuator wiring connects directly into the existing harness. The kit does not include a switch; you can continue using your existing switch or purchase one separately.\u003c\/p\u003e\u003cp\u003eThis retrofit kit is built for boats currently running standard length Bennett hydraulic cylinders and is not intended for SeaFox, SeaHunt, Chaparral, Seachase, or Rabalo boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15064-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004985\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 14.5 x 6.75 x 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Brackets Included:\u003c\/strong\u003e 2 Upper Style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No (existing or separately purchased switch required)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to retrofit boats equipped with standard length Bennett hydraulic trim tab cylinders. Not intended for SeaFox, SeaHunt, Chaparral, Seachase, or Rabalo boats.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer-listed OEM cross-reference numbers are specified for this retrofit kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 15064-001 RetroFit Kit used for?\u003c\/strong\u003e The Lenco 15064-001 RetroFit Kit converts a boat equipped with standard length Bennett hydraulic trim tab cylinders over to Lenco's 12V electric actuator system, without drilling or filling the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit work with any boat that has Bennett trim tabs?\u003c\/strong\u003e The Lenco 15064-001 is designed for boats equipped with standard length Bennett hydraulic cylinders, but it is not meant for SeaFox, SeaHunt, Chaparral, Seachase, or Rabalo boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Lenco Bennett RetroFit Kit?\u003c\/strong\u003e The kit includes 2 Bennett-compatible Lenco electric actuators with 6' leads, 2 upper style mounting brackets, a switch wiring kit with jumper wires, and all necessary mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to buy a new switch to use this retrofit kit?\u003c\/strong\u003e No. The Lenco 15064-001 does not include a switch, but jumper wires are included so you can connect to your existing switch, or you can purchase a switch separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill installing the Lenco 15064-001 require drilling new holes in my transom?\u003c\/strong\u003e No. This RetroFit Kit is designed to install using your existing Bennett trim planes, so no drilling or filling of the transom is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator leads on the Lenco 15064-001?\u003c\/strong\u003e Each of the two electric actuators included in the Lenco 15064-001 RetroFit Kit has a 6-foot lead for wiring to the existing harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this kit and a full new trim tab system?\u003c\/strong\u003e Instead of replacing an entire trim tab installation, the Lenco 15064-001 only replaces the Bennett hydraulic pump and cylinders, reusing your existing trim planes and switch wiring with new Lenco electric actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15064-001 RetroFit Kit weigh?\u003c\/strong\u003e The Lenco 15064-001 RetroFit Kit weighs 6.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Lenco Bennett RetroFit Kit packaging?\u003c\/strong\u003e The Lenco 15064-001 measures 14.5 x 6.75 x 4.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse my existing Bennett switch with this Lenco retrofit kit?\u003c\/strong\u003e Yes. The Lenco 15064-001 includes jumper wires specifically for attaching the new actuator wiring to your existing switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 15064-001 a genuine Lenco product?\u003c\/strong\u003e Yes, the 15064-001 RetroFit Kit is a genuine Lenco Marine product engineered specifically to upgrade Bennett hydraulic systems to Lenco electric actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco RetroFit Kit include installation instructions?\u003c\/strong\u003e Yes. Complete installation instructions are included with the Lenco 15064-001 RetroFit Kit.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995271387,"sku":"LEN-15064-001","price":409.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-15064-001-RetroFit-Kit-for-12V-Electric-Bennett-Systems__00310.1739458566.500.750.jpg?v=1785164604"},{"product_id":"lenco-xds-1-25-stroke-replacement-trim-tab-actuator-part-15120-001","title":"Lenco XDS 1.25\" Stroke Replacement Trim Tab Actuator (Part 15120-001)","description":"\u003cp\u003eThe Lenco 15120-001 is an XDS replacement trim tab actuator built for boat owners who need to restore or upgrade a single actuator in their electric trim tab system. Rather than relying on a conventional hydraulic cylinder, this actuator uses Lenco's ballscrew design, which the manufacturer states is twice as powerful as typical hydraulic actuators of similar size. That extra power translates into more reliable, more responsive tab movement, especially useful as a system ages and hydraulic units begin to lose consistent pressure.\u003c\/p\u003e\u003cp\u003eThis actuator has a 1.25 inch stroke and a 3\/8 inch top and end hole, with a listed hole diameter of 5\/16 inch for the ballscrew hardware. It ships as a complete kit, including all necessary mounting hardware and a 6 foot wire, so it can go straight onto an existing single or dual actuator trim tab setup without needing to source additional parts separately. As an electric trim tab actuator, it is intended as a direct functional replacement part within Lenco trim tab systems rather than a full new system installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15120-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop and End Hole Diameter:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.29 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847006842\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 15120-001 XDS actuator used for?\u003c\/strong\u003e The Lenco 15120-001 is a replacement trim tab actuator designed to restore a single actuator within an existing electric trim tab system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat stroke length does the Lenco 15120-001 actuator have?\u003c\/strong\u003e It has a 1.25 inch stroke, matching Lenco's XDS actuator line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15120-001 come with mounting hardware?\u003c\/strong\u003e Yes, the kit includes all necessary mounting hardware needed to install the 15120-001 actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire included with this actuator?\u003c\/strong\u003e A 6 foot wire is included with the Lenco 15120-001 actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hole dimensions on the Lenco 15120-001?\u003c\/strong\u003e The actuator has a 3\/8 inch top and end hole, with a 5\/16 inch hole diameter specified for the ballscrew hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15120-001 actuator weigh?\u003c\/strong\u003e This actuator weighs 3.29 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lenco 15120-001 actuator made of?\u003c\/strong\u003e The 15120-001 actuator is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Lenco XDS ballscrew actuator compare to a hydraulic trim tab actuator?\u003c\/strong\u003e Lenco's ballscrew design used in the 15120-001 is twice as powerful as typical hydraulic actuators of similar size, giving it a reliability advantage over standard hydraulic units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 15120-001 replace a failed actuator in a single or dual actuator system?\u003c\/strong\u003e Yes, the Lenco 15120-001 is built as a replacement part and works in either single or dual actuator trim tab configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Lenco 15120-001 actuator?\u003c\/strong\u003e The kit includes the XDS actuator itself, all necessary mounting hardware, and a 6 foot wire.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995893979,"sku":"LEN-15120-001","price":322.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LEN-15120-001__90933.1725633016.500.750.jpg?v=1785164608"},{"product_id":"lenco-xds-trim-tab-actuator-1-1-4-inch-stroke-replaces-oem-20740-0035","title":"Lenco XDS Trim Tab Actuator 1-1\/4 Inch Stroke, Replaces OEM 20740-0035","description":"\u003cp\u003eThe Lenco 15122-001 XDS Trim Tab Actuator is a replacement electric actuator for Lenco trim tab systems. It runs on 12 volts and delivers a 1-1\/4 inch stroke, with a 3\/8 inch end hole and a 5\/16 inch top cap hole for mounting. The actuator ships with all necessary mounting hardware and a 6 foot wire, so it is ready to install directly onto a compatible Lenco trim tab setup without sourcing separate hardware. The housing is constructed of plastic and the unit is built with a 5 lobe actuator design. This part is intended as a direct replacement for OEM part number 20740-0035, allowing a boat owner to restore a trim tab actuator that has failed or worn out without replacing the entire trim tab system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15122-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Hole Size:\u003c\/strong\u003e 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Cap Hole Size:\u003c\/strong\u003e 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLobe Count:\u003c\/strong\u003e 5 Lobe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847006866\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal replacement actuator for compatible Lenco trim tab systems; specific boat make, model, or engine fitment is not specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20740-0035\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the stroke length of the Lenco 15122-001 trim tab actuator?\u003c\/strong\u003e The Lenco 15122-001 XDS Trim Tab Actuator has a 1-1\/4 inch stroke.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15122-001 actuator include mounting hardware?\u003c\/strong\u003e Yes, all mounting hardware is included with the Lenco 15122-001 XDS Trim Tab Actuator, along with a 6 foot wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part does the Lenco 15122-001 replace?\u003c\/strong\u003e This actuator replaces OEM part number 20740-0035.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this trim tab actuator run on?\u003c\/strong\u003e The Lenco 15122-001 XDS Trim Tab Actuator operates on 12 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lenco 15122-001 actuator made from?\u003c\/strong\u003e Plastic construction is used for the housing of the Lenco 15122-001 XDS Trim Tab Actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15122-001 actuator weigh?\u003c\/strong\u003e The Lenco 15122-001 XDS Trim Tab Actuator weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hole sizes on this actuator?\u003c\/strong\u003e On the Lenco 15122-001 XDS Trim Tab Actuator, the end hole measures 3\/8 inch and the top cap hole measures 5\/16 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire included with this actuator?\u003c\/strong\u003e A 6 foot wire is included with the Lenco 15122-001 XDS Trim Tab Actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 15122-001 a genuine Lenco part or aftermarket?\u003c\/strong\u003e The Lenco 15122-001 XDS Trim Tab Actuator is a genuine Lenco replacement part, not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Lenco 15122-001 be used to replace a failed factory actuator?\u003c\/strong\u003e Yes, this actuator is designed as a direct replacement for OEM part 20740-0035 in Lenco trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Lenco 15122-001?\u003c\/strong\u003e The package for the Lenco 15122-001 XDS Trim Tab Actuator includes the actuator, all necessary mounting hardware, and a 6 foot wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lobes does the Lenco 15122-001 actuator have?\u003c\/strong\u003e The Lenco 15122-001 is built with a 5 lobe actuator design.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995926747,"sku":"LEN-15122-001","price":322.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15122-001-xds-electric-trim-tab-actuator-1.25-stroke__58750.1744119789.500.750.jpg?v=1785164608"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/lenco-15122-001-xds-electric-trim-tab-actuator-1.25-stroke__58750.1744119789.500.750.jpg?v=1785356972","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trim-tilt-jack-plates-trim-tabs-trim-tab-actuators.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}