{"title":"Trim Tab Kits (Hydraulic\/Electric)","description":null,"products":[{"product_id":"davis-instruments-whale-tail-xl-aluminum-hydrofoil-stabilizer-for-i-o-and-outboard-motors","title":"Davis Instruments Whale Tail XL Aluminum Hydrofoil Stabilizer for I\/O and Outboard Motors","description":"\u003cp\u003eThe Davis Instruments Whale Tail XL is an aluminum stabilizer fin designed to improve the performance of any inboard\/outboard or outboard-powered boat. It extends out behind the propeller, positioning itself to capture prop wash energy that is normally lost as the boat runs. The Whale Tail XL converts that energy into lift, giving the boat a more immediate response when the throttle is applied.\u003c\/p\u003e\u003cp\u003eOnce installed, the Whale Tail XL works to reduce porpoising and cavitation, smooth out the ride in rough water, and stabilize bow-light boats for improved safety and visibility. It flattens the wake behind the boat, which is useful for waterskiing, and helps create positive, skid-free turns. Boaters can expect increased top speed and improved fuel economy in most applications as a result of the added lift and stability.\u003c\/p\u003e\u003cp\u003eThe Whale Tail XL is built from marine-grade aluminum with a durable anodized finish to resist corrosion in both freshwater and saltwater use. It mounts to the anti-cavitation plate of the motor and installs in about 15 minutes using the included stainless steel mounting hardware, making it a straightforward upgrade for any inboard\/outboard or outboard motor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Davis Instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 448\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Whale Tail XL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 15.5 x 13.5 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Time:\u003c\/strong\u003e Approximately 15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Use:\u003c\/strong\u003e Freshwater and saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 011698006397\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00011698006397\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Whale Tail XL do?\u003c\/strong\u003e The Davis Instruments Whale Tail XL is an aluminum stabilizer fin that extends out behind the propeller to capture prop wash energy that would otherwise be lost, converting it into lift for a more immediate response when the throttle is applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Whale Tail XL fit my boat?\u003c\/strong\u003e Yes, the Whale Tail XL is designed to improve performance on any boat powered by an inboard\/outboard (I\/O) or outboard motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Whale Tail XL work in saltwater?\u003c\/strong\u003e Yes, the Whale Tail XL can be used year-round in both freshwater and saltwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does installation take?\u003c\/strong\u003e Installing the Whale Tail XL takes about 15 minutes, and stainless steel mounting hardware is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Whale Tail XL made of?\u003c\/strong\u003e It is built from marine-grade aluminum with a durable anodized finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Whale Tail XL?\u003c\/strong\u003e The Whale Tail XL measures 15.5 x 13.5 x 1.25 inches and weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Whale Tail XL reduce porpoising and cavitation?\u003c\/strong\u003e Yes, one of the main benefits of the Whale Tail XL is reducing porpoising and cavitation while smoothing out the ride in rough water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Whale Tail XL improve fuel economy?\u003c\/strong\u003e Most applications see increased top speed and improved fuel savings after installing the Whale Tail XL, since the fin turns wasted prop wash energy into usable lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Whale Tail XL good for waterskiing?\u003c\/strong\u003e Yes, the Whale Tail XL flattens the wake behind the boat and helps create positive, skid-free turns, which makes it well suited to waterskiing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the Whale Tail XL mount?\u003c\/strong\u003e The Whale Tail XL mounts on the anti-cavitation plate of the motor, positioned behind the propeller to capture prop wash energy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Whale Tail XL come with mounting hardware?\u003c\/strong\u003e Yes, stainless steel mounting hardware is included with the Whale Tail XL.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Whale Tail XL help a bow-light boat?\u003c\/strong\u003e Yes, the Whale Tail XL stabilizes bow-light boats, improving both ride quality and visibility.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":49026458681563,"sku":"DAV-448","price":127.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/00448_02.jpg?v=1785026827"},{"product_id":"bennett-marine-12-x-12-inch-hydraulic-trim-tab-kit-with-all-in-one-indicator-control-6bt-50110-89-00","title":"Bennett Marine 12 x 12 Inch Hydraulic Trim Tab Kit with All-in-One Indicator Control, 6BT-50110-89-00","description":"\u003cp\u003eThis Bennett Marine hydraulic trim tab kit gives boaters power, precision, and durability in a complete 12 inch by 12 inch trim plane system paired with Bennett's All-in-One Indicator Control. The kit is built to help a boat get on plane faster and hold plane at intermediate speeds, no matter the load, speed, or water conditions. As a boat accelerates, the bow rises and creates hull drag that hurts fuel efficiency; this trim tab kit reduces that drag, which allows the boat to run on less fuel. The tabs can also be angled independently to correct uneven loads, listing, and side-to-side imbalance.\u003c\/p\u003e\u003cp\u003eThe kit includes two Bennett hydraulic actuators, which are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tab planes into position. All hydraulic lines and wiring run internally and are concealed by the upper hinge, keeping them protected from harsh marine environments. The trim planes use a riveted angle tab style with an exclusive transom mount interlocking design.\u003c\/p\u003e\u003cp\u003eControl comes from Bennett's All-in-One Indicator Control, a stand-alone helm unit built for straightforward installation and operation. It features dedicated All Up and All Down buttons for one-touch positioning and includes auto tab retraction, so the tabs automatically return up when the ignition is powered off. The control is designed to work for both new trim tab installations and common retrofit installations. Trim tabs help reduce pounding, eliminate porpoising, and improve visibility and handling at speed, and this system is backed by low-maintenance, long-term hydraulic components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT-50110-89-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e 1212OBI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e All-in-One Indicator Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e (2) A1101A hydraulic trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Style:\u003c\/strong\u003e Riveted angle tab with transom mount interlocking design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 32 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600658\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tabs; 3 year warranty on the All-in-One control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bennett Marine 12 x 12 hydraulic trim tab kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit, hydraulic tubing and hardware, and Bennett's All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this trim tab kit come with a helm control?\u003c\/strong\u003e Yes, this 12 x 12 kit (6BT-50110-89-00) includes Bennett's All-in-One Indicator Control, a stand-alone helm unit with dedicated All Up and All Down buttons for one-touch tab positioning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the tabs retract automatically when the boat is shut off?\u003c\/strong\u003e Yes. The All-in-One Indicator Control included with this kit has auto tab retraction, so the trim tabs automatically return to the up position when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this kit?\u003c\/strong\u003e The trim tab planes in this Bennett Marine kit measure 12 inches wide by 12 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e This Bennett Marine hydraulic trim tab kit weighs 28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of this kit?\u003c\/strong\u003e The kit ships in a package measuring 32 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for a retrofit installation, or only new builds?\u003c\/strong\u003e The All-in-One Indicator Control included with this Bennett Marine kit is designed to accommodate both new trim tab installations and common retrofit installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wiring protected on this system?\u003c\/strong\u003e All hydraulic lines and wires run internally and are concealed by the upper hinge of the trim tab, keeping them shielded from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the hydraulic actuators made of?\u003c\/strong\u003e The two A1101A hydraulic actuators included in this kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tab planes into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this kit and Bennett's Euro-style rocker switch trim tab kits?\u003c\/strong\u003e This 6BT-50110-89-00 kit uses Bennett's All-in-One Indicator Control, a stand-alone unit with All Up\/All Down buttons and auto retraction, while Bennett's Euro-style kits use a simpler rocker switch without a dedicated indicator control unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty covers this trim tab kit?\u003c\/strong\u003e The trim tabs in this Bennett Marine kit are backed by a limited lifetime warranty, and the included All-in-One control is backed by a separate 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab system correct an uneven load or list?\u003c\/strong\u003e Yes, the independently adjustable trim tab planes in this Bennett Marine kit can be angled to correct uneven loads, listing, and side-to-side imbalance while underway.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449618651,"sku":"BEN-1212OBI","price":1236.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-1212OBI-12-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-All-in-One-Control__43870.1739463173.500.750.jpg?v=1785163386"},{"product_id":"bennett-1812e-complete-18-x-12-inch-hydraulic-trim-tab-kit-with-euro-style-rocker-switch","title":"Bennett 1812E Complete 18 x 12 Inch Hydraulic Trim Tab Kit with Euro-Style Rocker Switch","description":"\u003cp\u003eThe Bennett 1812E is a complete hydraulic trim tab kit built around an 18 inch wide by 12 inch deep stainless steel trim tab plane, paired with a Euro-Style rocker switch control at the helm. Hydraulic trim tabs like this kit are built for boats that stay in the water and need dependable, high-speed action in demanding marine conditions. As a boat accelerates, the bow rises and the hull drags, burning extra fuel; this kit is designed to get the boat on plane faster and hold plane at intermediate speeds, cutting hull drag and improving fuel efficiency. The tabs can also be adjusted to correct uneven loading or listing.\u003c\/p\u003e\u003cp\u003eEach trim tab is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion, keeping maintenance minimal over the long term. The kit's two A1101A hydraulic actuators are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position, and all hydraulic lines and wiring run internally, concealed by the upper hinge, so they are not exposed to harsh marine environments. Power comes from the included V351HPU1 hydraulic power unit with wiring, operated through the Euro-Style rocker switch control at the helm.\u003c\/p\u003e\u003cp\u003eThis complete package includes two stainless steel trim tabs, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit with wiring, one Euro-Style rocker switch control, a hardware bag, 20 feet of hydraulic tubing, and installation instructions, backed by a manufacturer limited lifetime warranty. It suits flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500014800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 1812E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Complete Hydraulic Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Euro-Style Rocker Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e (2) A1101A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 25 inches L x 15 inches W x 5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285125601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Manufacturer Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett 1812E hydraulic trim tab kit do?\u003c\/strong\u003e It helps a boat get on plane faster and hold plane at intermediate speeds by adjusting the 18 x 12 inch trim tab planes, which reduces hull drag, improves fuel efficiency, and corrects listing or uneven loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett 1812E kit?\u003c\/strong\u003e The trim tab planes in the Bennett 1812E kit measure 18 inches wide by 12 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat control does the Bennett 1812E kit use?\u003c\/strong\u003e This kit comes with a Euro-Style rocker switch control at the helm, used to adjust the trim tabs individually or together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Bennett 1812E trim tab kit?\u003c\/strong\u003e The complete kit includes two stainless steel trim tabs, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit with wiring, one Euro-Style rocker switch control, a hardware bag, 20 feet of hydraulic tubing, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the trim tabs on the Bennett 1812E welded or sheared?\u003c\/strong\u003e The Bennett 1812E trim tabs are sheared and bent, not welded, because welding alters the properties of stainless steel and invites corrosion, keeping long-term maintenance minimal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wiring protected on this system?\u003c\/strong\u003e On the Bennett 1812E, the hydraulic lines and wires are routed internally and concealed by the upper hinge, so they are not exposed to harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is the Bennett 1812E trim tab kit recommended for?\u003c\/strong\u003e The Bennett 1812E is well suited for flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this trim tab kit?\u003c\/strong\u003e The Bennett hydraulic trim tab kit with Euro-Style rocker control carries manufacturer part number 6BT500014800.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett 1812E trim tab kit weigh?\u003c\/strong\u003e The complete Bennett 1812E hydraulic trim tab kit weighs 28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hydraulic power unit and actuators come with the Bennett 1812E?\u003c\/strong\u003e This kit ships with a V351HPU1 hydraulic power unit and two A1101A hydraulic trim tab actuators, which are flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett 1812E trim tab kit?\u003c\/strong\u003e The Bennett 1812E hydraulic trim tab kit is backed by a manufacturer limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Euro-Style control the only helm control option for this size trim tab?\u003c\/strong\u003e The 18 x 12 inch trim tab planes used in the Bennett 1812E are also offered with an All-in-One Indicator Control helm unit under a different Bennett kit and part number, so buyers who want auto tab retraction and All Up\/All Down buttons should confirm which control style they need before ordering.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449651419,"sku":"BEN-1812E","price":933.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-1812E-Complete-18-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-Euro-Style-Rocker-Trim-Switch__78217.1737894040.500.750.jpg?v=1785163386"},{"product_id":"bennett-marine-complete-12-in-x-12-in-hydraulic-trim-tab-kit-with-euro-style-rocker-switch","title":"Bennett Marine Complete 12 in x 12 in Hydraulic Trim Tab Kit with Euro-Style Rocker Switch","description":"\u003cp\u003eThe Bennett Marine Complete 12 in x 12 in Hydraulic Trim Tab Kit (6BT500005700) is a full hydraulic trim tab system built for boats that stay in the water and see high-speed action under demanding marine conditions. It helps a boat get on plane faster and stay planed at intermediate speeds by countering the bow rise that creates hull drag and cuts fuel efficiency. Bennett trim tabs get the boat on plane quickly, reducing hull drag and fuel use, and can also be used to correct uneven loads caused by passengers, gear, or fuel distribution.\u003c\/p\u003e\u003cp\u003eEach trim tab plane measures 12 inches wide by 12 inches deep and is sheared and bent from stainless steel rather than welded, since welding alters the properties of stainless steel and invites corrosion. The kit includes two Bennett Hydraulic Actuators, strong flexible nylon\/fiberglass hydraulic cylinders that push the tabs into position, plus a V351HPU1 Hydraulic Power Unit with wiring and a Euro-Style Rocker Switch control. All hydraulic lines and wires run internally, concealed by the upper hinge, so they are not exposed to harsh marine environments. Installation instructions and a hardware bag are included, and the system is backed by a manufacturer limited lifetime warranty.\u003c\/p\u003e\u003cp\u003eThis trim tab kit is recommended for flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500005700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Euro-Style Rocker Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e (2) A1101A Hydraulic Trim Tab Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1 with Wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 25 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285121603\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Types:\u003c\/strong\u003e Flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, cruisers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Manufacturer Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this kit?\u003c\/strong\u003e The trim tab planes in the Bennett Marine 6BT500005700 kit measure 12 inches wide by 12 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with this hydraulic trim tab kit?\u003c\/strong\u003e The kit includes two stainless steel trim tabs, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit with wiring, one Euro-Style Rocker Switch control, a hardware bag, 20 feet of hydraulic tubing, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the trim tabs welded or formed from a single sheet?\u003c\/strong\u003e The stainless steel trim tabs in this Bennett Marine kit are sheared and bent rather than welded, since welding alters the properties of stainless steel and can invite corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of control switch operates this trim tab system?\u003c\/strong\u003e This kit uses a Euro-Style Rocker Switch control, which is a simpler stand-alone toggle-style switch rather than Bennett's All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wiring protected on this system?\u003c\/strong\u003e On the 6BT500005700 trim tab kit, all hydraulic lines and wires run internally and are concealed by the upper hinge, keeping them out of harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is this Bennett Marine trim tab kit recommended for?\u003c\/strong\u003e This kit is recommended for flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo trim tabs actually improve fuel economy?\u003c\/strong\u003e Yes. By countering bow rise on acceleration, the Bennett Marine 12 in x 12 in trim tab kit reduces hull drag, which helps the boat get on plane faster and use less fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab kit correct an uneven load on the boat?\u003c\/strong\u003e Yes, the trim tabs on this Bennett Marine hydraulic kit can be adjusted individually to correct listing caused by uneven passenger, gear, or fuel distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e The Bennett Marine 6BT500005700 hydraulic trim tab kit weighs 27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators and power unit does this kit use?\u003c\/strong\u003e This kit uses two A1101A hydraulic trim tab actuators driven by a V351HPU1 hydraulic power unit with wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab system covered by a warranty?\u003c\/strong\u003e The Bennett Marine 6BT500005700 hydraulic trim tab kit is backed by a manufacturer limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit differ from Bennett's 12 in x 12 in kit with All-in-One Control?\u003c\/strong\u003e Both use the same 12 inch by 12 inch trim tab planes and A1101A actuators, but the 6BT500005700 kit uses a Euro-Style Rocker Switch control instead of Bennett's All-in-One Indicator Control with auto tab retraction.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449684187,"sku":"BEN-1212E","price":910.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-Complete-12-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-Euro-Style-Trim-Switch__31336.1739477221.500.750.jpg?v=1785163386"},{"product_id":"bennett-18-x-12-hydraulic-trim-tab-kit-with-all-in-one-indicator-control-6bt501109000","title":"Bennett 18 x 12 Hydraulic Trim Tab Kit with All-in-One Indicator Control 6BT501109000","description":"\u003cp\u003eThe Bennett 18 x 12 Hydraulic Trim Tab Kit with All-in-One Indicator Control gives boaters precise, powerful control over trim in changing load, speed, and water conditions. Bennett's hydraulic trim tabs are engineered for power, precision, and durability, helping a boat get on plane quickly, which reduces hull drag and improves fuel efficiency. The tabs can also be used to correct uneven loads for a more level, stable ride.\u003c\/p\u003e\u003cp\u003eThis kit includes two Bennett hydraulic actuators, strong flexible nylon\/fiberglass hydraulic cylinders that push the trim planes into position. All hydraulic lines and wires are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments. The trim planes use an exclusive transom mount interlocking tab design with a riveted angle tab style for a secure, low-maintenance installation.\u003c\/p\u003e\u003cp\u003eIncluded is Bennett's All-in-One Indicator Control, a stand-alone helm control designed for easy installation and operation. It features convenient All Up and All Down buttons and automatic tab retraction, so the tabs retract fully when the ignition is powered off. The complete kit includes two trim plane assemblies, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit, hydraulic tubing and hardware, and the All-in-One Indicator Control unit, backed by a manufacturer limited lifetime warranty on the trim tab system and a 3 year warranty on the control.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT501109000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e All-in-One Indicator Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Design:\u003c\/strong\u003e Riveted angle tab, transom mount interlocking design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes; nylon\/fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 32 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tab system; 3 year warranty on All-in-One Indicator Control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett 6BT501109000 kit?\u003c\/strong\u003e The trim planes in this Bennett hydraulic trim tab kit measure 18 inches wide by 12 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a control unit?\u003c\/strong\u003e Yes, the Bennett 6BT501109000 kit includes the All-in-One Indicator Control, a stand-alone helm control with All Up and All Down buttons and automatic tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit, hydraulic tubing and hardware, and the All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett 18 x 12 trim tab kit weigh?\u003c\/strong\u003e This complete kit weighs 30 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of this trim tab kit?\u003c\/strong\u003e The Bennett 6BT501109000 kit ships in a package measuring 32 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes are stainless steel, and the hydraulic actuators are constructed of flexible nylon\/fiberglass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wires protected on this system?\u003c\/strong\u003e On the Bennett 6BT501109000 trim tab system, all hydraulic lines and wires are routed internally and concealed by the upper hinge, keeping them out of harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim tab control automatically retract the tabs?\u003c\/strong\u003e Yes, the All-in-One Indicator Control included with this kit has auto tab retraction, so the tabs retract fully when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting design of this trim tab system?\u003c\/strong\u003e This kit uses an exclusive transom mount interlocking tab design with a riveted angle tab style for secure, low-maintenance installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this Bennett trim tab kit?\u003c\/strong\u003e The trim tab system carries a manufacturer limited lifetime warranty, and the All-in-One Indicator Control is backed by a 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab kit help correct uneven loads on my boat?\u003c\/strong\u003e Yes, the Bennett 6BT501109000 hydraulic trim tab kit can be used to correct uneven or listing loads in addition to improving planing performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat benefits does this trim tab system provide while underway?\u003c\/strong\u003e It helps a boat get on plane faster and stay on plane at intermediate speeds, reduces pounding, eliminates porpoising, and improves visibility, safety, and fuel efficiency.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449716955,"sku":"BEN-1812OBI","price":1268.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-1812OBI-18-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-All-in-One-Control__75286.1739477218.500.750.jpg?v=1785163386"},{"product_id":"bennett-129e-hydraulic-trim-tab-kit-12-x-9-inch-euro-style-rocker-switch-control","title":"Bennett 129E Hydraulic Trim Tab Kit, 12 x 9 Inch, Euro-Style Rocker Switch Control","description":"\u003cp\u003eThe Bennett 129E is a complete hydraulic trim tab kit built for boats that stay in the water and need reliable, high-speed performance under demanding marine conditions. As a boat accelerates, the bow rises, creating hull drag that cuts into fuel efficiency; this kit gets the boat on plane faster and keeps it planing at intermediate speeds, reducing that drag and improving fuel economy. The trim tabs can also be used to correct uneven loads and listing, giving the helm more precise control over ride attitude.\u003c\/p\u003e\u003cp\u003eEach Bennett trim tab is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion, so the tabs are built for long-term durability with minimal maintenance. The kit includes two Bennett hydraulic actuators, strong, flexible nylon\/fiberglass hydraulic cylinders that push the tabs into position. All hydraulic lines and wires are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments. Control comes from an included ES2000 Euro-style rocker switch, a straightforward two-position control for precise, on-the-fly trim adjustment.\u003c\/p\u003e\u003cp\u003eThis 129E kit is sized with 12 inch wide by 9 inch deep trim tab blades and is intended for boats from 16 to 25 feet, and is well suited to flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers. Everything needed for a complete installation is included, backed by a limited lifetime warranty on the trim tab hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 129E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Euro-Style Rocker Switch (ES2000)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Fitment:\u003c\/strong\u003e 16 feet to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e A1101A (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285101605\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50000-77-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 16 feet to 25 feet\u003c\/li\u003e\n\u003cli\u003eWell suited to flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett 129E Hydraulic Trim Tab Kit designed to do?\u003c\/strong\u003e The Bennett 129E is designed to improve boat performance, handling, and ride quality across changing load, speed, and water conditions. It helps a boat get on plane faster, reduces hull drag, improves fuel efficiency, and corrects listing or uneven loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades in the Bennett 129E kit?\u003c\/strong\u003e The trim tab blades in the Bennett 129E kit measure 12 inches wide by 9 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Bennett 129E recommended for?\u003c\/strong\u003e The Bennett 129E is recommended for boats 16 feet to 25 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included in the Bennett 129E trim tab kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two A1101A hydraulic actuators, one V351HPU hydraulic power unit, one ES2000 Euro-style rocker switch, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett 129E come with a control switch?\u003c\/strong\u003e Yes, the Bennett 129E includes an ES2000 Euro-style rocker switch for control at the helm, providing precise, on-the-fly trim adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wires protected on this trim tab system?\u003c\/strong\u003e On the Bennett 129E, all hydraulic lines and wires are routed internally and concealed by the upper hinge, keeping them shielded from harsh marine environments and improving long-term durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Bennett 129E trim tabs made from?\u003c\/strong\u003e The Bennett 129E trim tabs are stainless steel, and each tab is sheared and bent rather than welded, since welding alters the properties of stainless steel and can invite corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the Bennett 129E trim tab kit?\u003c\/strong\u003e The Bennett 129E hydraulic trim tab hardware is backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hydraulic actuators used in the Bennett 129E kit?\u003c\/strong\u003e The Bennett 129E kit uses two A1101A hydraulic actuators, which are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hydraulic tubing included with the Bennett 129E kit?\u003c\/strong\u003e The Bennett 129E kit includes 20 feet of hydraulic tubing along with the hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett 129E also sold under a Yamaha part number?\u003c\/strong\u003e Yes, the Bennett 129E hydraulic trim tab kit corresponds to Yamaha part number 6BT-50000-77-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat benefits does the Bennett 129E provide once installed?\u003c\/strong\u003e Once installed, the Bennett 129E can increase speed, improve visibility and safety, get a boat on plane faster, improve fuel efficiency, and provide precise, accurate trim control.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449749723,"sku":"BEN-129E","price":842.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-129E-Hydraulic-Trim-Tab-Kit-12-inch-by-9-inch-with-Euro-Style-Controls__68381.1739459283.500.750.jpg?v=1785163386"},{"product_id":"bennett-189e-hydraulic-trim-tab-kit-18-x-9-inch-euro-style-controls-fits-boats-22-to-30-feet","title":"Bennett 189E Hydraulic Trim Tab Kit, 18 x 9 Inch, Euro Style Controls, Fits Boats 22 to 30 Feet","description":"\u003cp\u003eThe Bennett 189E Hydraulic Trim Tab Kit is an 18 inch by 9 inch hydraulic trim tab system built for boats that stay in the water and see high-speed action under demanding marine conditions. Trim tabs correct the bow rise that happens under acceleration, cutting hull drag so the boat gets on plane faster, runs on plane at intermediate speeds, and burns less fuel. They also let the operator correct uneven loading and listing for a more level, stable ride.\u003c\/p\u003e\u003cp\u003eEach trim tab blade is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion; the result is a low-maintenance blade built for long-term service. The kit includes two Bennett A1101A hydraulic actuators, flexible nylon\/fiberglass hydraulic cylinders that push the tabs into position, with all hydraulic lines and wiring routed internally and concealed by the upper hinge so they are not exposed to the elements. Control is handled by an included Euro-Style Rocker Switch (ES2000) for simple, direct onboard operation.\u003c\/p\u003e\u003cp\u003eThis kit is recommended for boats 22 feet to 30 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers. It is backed by a limited lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500018700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 189E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Euro-Style Rocker Switch (ES2000)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 22 feet to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators:\u003c\/strong\u003e 2 Bennett A1101A hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim tab blades with nylon\/fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 25 inches L x 15 inches W x 5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285105603\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 22 feet to 30 feet\u003c\/li\u003e\n\u003cli\u003eSuited to flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Bennett 189E Hydraulic Trim Tab Kit?\u003c\/strong\u003e The Bennett 189E kit uses an 18 inch wide by 9 inch deep trim tab blade on each side of the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit recommended for?\u003c\/strong\u003e This kit is recommended for boats 22 feet to 30 feet, including flats boats, center consoles, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included in the Bennett 189E kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two Bennett A1101A hydraulic actuators, one V351HPU hydraulic power unit, one ES2000 Euro-Style Rocker Switch, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Euro-Style control work on this kit?\u003c\/strong\u003e The Bennett 189E is operated with an included Euro-Style Rocker Switch (ES2000), giving direct onboard control of tab position rather than an automated indicator display.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the trim tab blades made of?\u003c\/strong\u003e The blades on the Bennett 189E kit are stainless steel, sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use hydraulic trim tabs on a boat?\u003c\/strong\u003e Trim tabs correct the bow rise that occurs under acceleration, reducing hull drag so the boat reaches plane faster, runs efficiently at intermediate speeds, and can also correct uneven loading or listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hydraulic lines exposed on the Bennett 189E actuators?\u003c\/strong\u003e No, on the Bennett A1101A actuators used in this kit all hydraulic lines and wiring are routed internally and concealed by the upper hinge, keeping them out of harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett 189E Hydraulic Trim Tab Kit?\u003c\/strong\u003e The Bennett 189E Hydraulic Trim Tab Kit is backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett 189E trim tab kit weigh?\u003c\/strong\u003e The complete Bennett 189E Hydraulic Trim Tab Kit weighs 27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from Bennett's All-in-One Indicator Control kits?\u003c\/strong\u003e The Bennett 189E kit uses a Euro-Style Rocker Switch for direct manual control, while Bennett's All-in-One Indicator Control kits add a stand-alone helm display with all-up\/all-down buttons and automatic tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hydraulic tubing included with the kit?\u003c\/strong\u003e The Bennett 189E kit includes 20 feet of hydraulic tubing for connecting the power unit to the trim tab actuators.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449880795,"sku":"BEN-189E","price":902.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-189E-Hydraulic-Trim-Tab-Kit-18-inch-by-9-inch-with-Euro-Style-Controls__64383.1739477217.500.750.jpg?v=1785163386"},{"product_id":"bennett-marine-24-x-12-inch-hydraulic-trim-tab-kit-with-all-in-one-indicator-control-6bt501109100","title":"Bennett Marine 24 x 12 Inch Hydraulic Trim Tab Kit with All-in-One Indicator Control, 6BT501109100","description":"\u003cp\u003eThis Bennett Marine hydraulic trim tab kit gives boaters 24 inch wide by 12 inch deep trim tab planes paired with an All-in-One Indicator Control unit at the helm. Hydraulic trim tabs like these help a boat get on plane faster and stay on plane at intermediate speeds, which reduces hull drag from bow rise and improves fuel efficiency. They also let the operator correct listing and uneven loads, reduce pounding, and eliminate porpoising for a smoother, safer ride.\u003c\/p\u003e\u003cp\u003eThe kit uses Bennett's exclusive transom mount interlocking tab design with a riveted angle tab style rather than welded construction. Two hydraulic actuators push the tab planes into position, and all hydraulic lines and wiring run internally, concealed by the upper hinge so they are not exposed to harsh marine conditions. The included All-in-One Indicator Control is a stand-alone helm unit with dedicated All Up and All Down buttons and automatic tab retraction that raises the tabs whenever the ignition is powered off, simplifying operation for the boater.\u003c\/p\u003e\u003cp\u003eThe complete kit ships with everything needed for installation: two trim plane assemblies, two A1101A hydraulic trim tab actuators, a V351HPU1 hydraulic power unit, and hydraulic tubing and hardware. The trim tab hardware is backed by a limited lifetime warranty, and the All-in-One Indicator Control carries a 3 year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT501109100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e All-in-One Indicator Control (OBI9000H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Design:\u003c\/strong\u003e Exclusive transom mount interlocking tab design, riveted angle tab style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e (2) A1101A hydraulic trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 38 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Warranty:\u003c\/strong\u003e Limited lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Warranty:\u003c\/strong\u003e 3 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this Bennett kit?\u003c\/strong\u003e The trim tab planes on the Bennett 6BT501109100 kit measure 24 inches wide by 12 inches deep, sized to give larger boats more surface area for planing and load correction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a helm control unit?\u003c\/strong\u003e Yes, the Bennett 6BT501109100 hydraulic trim tab kit includes an All-in-One Indicator Control unit with dedicated All Up and All Down buttons and automatic tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators and power unit come with this trim tab kit?\u003c\/strong\u003e Two Bennett A1101A hydraulic trim tab actuators are included, along with a V351HPU1 hydraulic power unit and the hydraulic tubing and hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hydraulic tubing and wiring exposed to the elements?\u003c\/strong\u003e No. On the Bennett 6BT501109100 kit, all hydraulic lines and wires run internally and are concealed by the upper hinge, protecting them from harsh marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e The Bennett 6BT501109100 hydraulic trim tab kit weighs 35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this kit?\u003c\/strong\u003e This trim tab kit ships in a package measuring 38 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to this trim tab kit?\u003c\/strong\u003e The trim tab hardware on the Bennett 6BT501109100 kit carries a limited lifetime warranty, while the included All-in-One Indicator Control is backed by a separate 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of tab design does this kit use?\u003c\/strong\u003e It uses Bennett's exclusive transom mount interlocking tab design with a riveted angle tab style, rather than a welded construction that can invite corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit correct uneven loads on my boat?\u003c\/strong\u003e Yes. Beyond getting the boat on plane faster, the tab planes on the Bennett 6BT501109100 kit can be adjusted to correct listing and uneven weight distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The complete Bennett 6BT501109100 kit includes two trim plane assemblies, two A1101A hydraulic actuators, one V351HPU1 hydraulic power unit, hydraulic tubing and hardware, and the All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the All-in-One control differ from a standard rocker switch control?\u003c\/strong\u003e The All-in-One Indicator Control included with this kit is a stand-alone helm unit with dedicated All Up and All Down buttons and auto tab retraction, rather than a simple manual rocker switch used on Bennett's Euro-style controlled kits.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449913563,"sku":"BEN-2412OBI","price":1301.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-2412OBI-24-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-All-in-One-Control__10142.1739477218.500.750.jpg?v=1785163386"},{"product_id":"bennett-marine-hydraulic-trim-tab-kit-24-x-9-inch-euro-style-control-part-6bt500028900","title":"Bennett Marine Hydraulic Trim Tab Kit, 24 x 9 Inch, Euro-Style Control, Part 6BT500028900","description":"\u003cp\u003eThis Bennett Marine hydraulic trim tab kit gives boaters precise control over running attitude, helping the boat get on plane faster and stay on plane at intermediate speeds. As a boat accelerates, the bow rises and creates hull drag that cuts fuel efficiency; this trim tab kit corrects that lift and also lets the operator compensate for uneven loads from passengers, fuel, or gear. The kit includes two Bennett hydraulic actuators, which are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position. All hydraulic lines and wiring are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments. Control is handled through an ES2000 Euro-Style Rocker Switch, giving the operator direct, responsive command of each tab.\u003c\/p\u003e\u003cp\u003eEach trim tab blade measures 24 inches wide by 9 inches deep and is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion; this construction method keeps maintenance low and extends service life. The kit is recommended for boats from 26 feet to 40 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers. Everything needed for a full installation is included, from the trim plane assemblies to the hydraulic power unit and tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500028900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Style:\u003c\/strong\u003e Euro-Style Rocker Switch (ES2000)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 26 feet to 40 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 30 inches L x 15 inches W x 5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim tab blades; nylon\/fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 trim plane assemblies, 2 A1101A hydraulic actuators, 1 hydraulic power unit, 1 ES2000 Euro-Style Rocker Switch, 1 hardware bag, 20 feet of hydraulic tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tabs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades in this Bennett kit?\u003c\/strong\u003e The blades in the Bennett Hydraulic Trim Tab Kit (part 6BT500028900) measure 24 inches wide by 9 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a control switch?\u003c\/strong\u003e Yes, the kit comes with an ES2000 Euro-Style Rocker Switch for direct control of the trim tabs, along with 20 feet of hydraulic tubing to connect it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit recommended for?\u003c\/strong\u003e This kit is recommended for boats from 26 feet to 40 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes 2 trim plane assemblies, 2 A1101A hydraulic actuators, 1 hydraulic power unit, the ES2000 Euro-Style Rocker Switch, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hydraulic actuators made of?\u003c\/strong\u003e The two hydraulic actuators included with this Bennett trim tab kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the trim tab blades welded together?\u003c\/strong\u003e No, the blades on this Bennett trim tab kit are sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the complete trim tab kit weigh?\u003c\/strong\u003e The Bennett Hydraulic Trim Tab Kit (6BT500028900) weighs 28 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hydraulic wiring exposed to water and weather?\u003c\/strong\u003e No, all hydraulic lines and wiring on this kit are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this trim tab kit?\u003c\/strong\u003e The Bennett trim tabs in this kit are backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit differ from Bennett's All-in-One control kit?\u003c\/strong\u003e This 24 x 9 inch kit (6BT500028900) uses an ES2000 Euro-Style Rocker Switch for control, while Bennett's separate 24 x 12 inch kit uses an All-in-One Indicator Control with auto tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab kit help with fuel efficiency?\u003c\/strong\u003e Yes, by getting the boat on plane quickly this kit reduces hull drag, which helps improve fuel efficiency and also allows correction of uneven loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete trim tab system or a single replacement part?\u003c\/strong\u003e This is a complete hydraulic trim tab kit, not a single replacement part, and includes both trim plane assemblies and the actuators, power unit, and control switch needed for a full installation.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449946331,"sku":"BEN-249E","price":933.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-249E-Hydraulic-Trim-Tab-Kit-24-inch-by-9-inch-with-Euro-Style-Controls__58315.1739477217.500.750.jpg?v=1785163386"},{"product_id":"bennett-marine-12-x-12-bolt-electric-trim-tab-kit-part-6bt500133800","title":"Bennett Marine 12 x 12 BOLT Electric Trim Tab Kit, Part 6BT500133800","description":"\u003cp\u003eThe Bennett Marine BOLT Electric Trim Tab Kit (part 6BT500133800) is a complete 12 inch by 12 inch trim tab system built to improve ride quality, handling, and performance on trailered boats from 17 to 30 feet. Bennett Marine has manufactured electric trim tabs since 1960 and this BOLT series uses an updated actuator design that addresses the water intrusion and part failures common to older trim tab technology.\u003c\/p\u003e\u003cp\u003eThe kit centers on a water-tight black nylon actuator with wiring routed through the upper hinge, so no wires are ever exposed to the marine environment. The main seal is positioned high on the actuator to further guard against marine growth and water intrusion failures, and the system runs quieter than older-technology competitors. Installation is fast because the actuator arrives fully assembled and does not need to be taken apart before mounting.\u003c\/p\u003e\u003cp\u003eThis kit is best suited to flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is intended for single actuator use per side. Trim tab size is listed in span x chord format: span is the side-to-side measurement and chord is the fore-to-aft measurement, giving this set its 12 inch by 12 inch dimensions. A control switch is required to operate the system and is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500133800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes and mounting plates; black nylon actuator housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 17 to 30 feet, trailered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285600047\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e (2) BEA2000 12-volt trim tab actuators, (2) stainless steel trim planes and mounting plates, (2) 20 ft harnesses with waterproof connectors, 6 ft wire harnesses with waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty for electric actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts; recommended for trailered boats 17 to 30 feet using a single actuator per side.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett Marine 6BT500133800 kit?\u003c\/strong\u003e The trim tabs in this kit measure 12 inches wide by 12 inches deep. Bennett Marine trim tab sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit designed for?\u003c\/strong\u003e This kit is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is recommended for trailered boats from 17 to 30 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this trim tab kit?\u003c\/strong\u003e No. The switch that operates the trim tabs is sold separately from this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part 6BT500133800?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 ft harnesses with waterproof connectors, and 6 ft wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the wiring protected from water intrusion?\u003c\/strong\u003e Wiring is threaded through the upper hinge of the actuator so no wires are exposed to the marine environment, and the main seal is positioned high on the actuator to guard against marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this trim tab system use?\u003c\/strong\u003e The Bennett Marine BOLT actuators in this kit operate on 12 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be run with two actuators synchronized on one tab?\u003c\/strong\u003e No. This electric trim tab system is intended for single actuator use per tab, since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes and mounting plates included with this kit are stainless steel, while the actuator housing is water-tight black nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow difficult is installation for this trim tab kit?\u003c\/strong\u003e Installation is designed to be fast because the actuator arrives fully assembled and does not need to be disassembled before mounting to the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this Bennett Marine trim tab kit?\u003c\/strong\u003e The electric actuators in this kit carry a lifetime manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit run quieter than other trim tab systems?\u003c\/strong\u003e Yes. The BOLT actuator design is built to run quieter than older-technology electric trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the part number 6BT500133800 refer to?\u003c\/strong\u003e 6BT500133800 is the part number for this complete 12 inch by 12 inch Bennett Marine BOLT electric trim tab kit, sold without a control switch.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450503387,"sku":"BEN-BOLT1212","price":682.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT1212-12-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit__94533.1739460326.500.750.jpg?v=1785163393"},{"product_id":"bennett-marine-bolt1212ed-edge-mount-12-x-12-electric-trim-tab-kit-for-trailered-boats-17-28-ft","title":"Bennett Marine BOLT1212ED Edge Mount 12 x 12 Electric Trim Tab Kit for Trailered Boats 17-28 ft","description":"\u003cp\u003eThe Bennett Marine BOLT1212ED is a 12 inch by 12 inch electric trim tab kit built with an Edge Mount design for boats with limited vertical transom space. Trim tabs help balance boat loads, get the boat on plane faster, and improve fuel efficiency and ride quality by adjusting the running angle of the hull. This kit is designed for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts, and is recommended for trailered boats from 17 to 28 feet using a single actuator per tab.\u003c\/p\u003e\u003cp\u003eThe Edge Mount configuration uses an adjustable upper hinge specifically engineered for transoms with limited vertical clearance, requiring less than 6.5 inches of vertical transom space to install. The tabs turn up for added strength and use piano-hinged backing plates. Each kit includes two BEA2000 12-volt trim tab actuators built with a robust, water-tight black nylon housing that resists the water intrusion and marine growth failures common in older trim tab designs. The main seal is positioned high on the actuator to further protect against marine growth and water intrusion, and the wiring is routed through the upper hinge so no wires are exposed to the marine environment. Installation is fast because the actuator does not need to be disassembled during the process.\u003c\/p\u003e\u003cp\u003eTrim tab sizing on this kit follows the span by chord format: span is the side-to-side measurement and chord is the fore-to-aft measurement, giving this kit its 12 inch by 12 inch dimensions. The kit is backed by a 5 year manufacturer's warranty. A trim tab switch is required for operation but is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e BOLT1212ED, 6BT-50013-41-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600283\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Span (Width):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Chord (Depth):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Transom Space Required:\u003c\/strong\u003e 6.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Stroke:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Length:\u003c\/strong\u003e 13.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Deutsch DT Series, 13A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Force (Actuation and Return):\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 10A at 250 pounds, 30A at 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Actuators Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Trim Planes Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Lengths:\u003c\/strong\u003e 20 feet (actuator to helm), 6 feet (actuator wire harness)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes, black nylon actuator housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for trailered boats 17 to 28 feet\u003c\/li\u003e\n\u003cli\u003eSuitable for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003cli\u003eDesigned for single actuator use per trim tab\u003c\/li\u003e\n\u003cli\u003eEdge Mount design suited to transoms with less than 6.5 inches of vertical space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Bennett Marine BOLT1212ED trim tab kit designed for?\u003c\/strong\u003e The BOLT1212ED (6BT500134100) is recommended for trailered boats from 17 to 28 feet, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the Edge Mount version different from a standard Bennett BOLT trim tab kit?\u003c\/strong\u003e The Edge Mount design on the BOLT1212ED uses an adjustable upper hinge built for transoms with limited vertical space, requiring less than 6.5 inches of vertical transom space to install, and the tabs turn up for added strength with piano-hinged backing plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in this kit?\u003c\/strong\u003e The BOLT1212ED trim tabs measure 12 inches by 12 inches, listed in span by chord format where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a trim tab switch included with the BOLT1212ED kit?\u003c\/strong\u003e No, the switch is sold separately from the BOLT1212ED (6BT500134100) trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical transom space does the BOLT1212ED require?\u003c\/strong\u003e The BOLT1212ED Edge Mount kit requires less than 6.5 inches of vertical transom space, specifically 6.39 inches, making it suitable for transoms with limited clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Bennett BOLT1212ED trim tab system use?\u003c\/strong\u003e This trim tab kit operates on 12 volts and uses Deutsch DT Series 13A waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT1212ED protect against water intrusion?\u003c\/strong\u003e Wiring on the BOLT1212ED (6BT500134100) is routed through the upper hinge so no wires are exposed to the marine environment, the actuator housing is water-tight black nylon, and the main seal sits high on the actuator to guard against marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this Bennett trim tab kit?\u003c\/strong\u003e The BOLT1212ED is backed by a 5 year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made from?\u003c\/strong\u003e The trim planes (tabs) in the BOLT1212ED kit are made of stainless steel, paired with a black nylon actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much working force do the BOLT1212ED actuators produce?\u003c\/strong\u003e The actuators used in this kit produce a working force of 750 pounds for both actuation and return, drawing 10A at 250 pounds and 30A at 750 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on the BOLT1212ED kit?\u003c\/strong\u003e Each BOLT1212ED actuator comes with a 6 foot wire harness plus a 20 foot harness with waterproof connectors, both included in the kit.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450470619,"sku":"BEN-BOLT1212ED","price":699.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT1212ED-12-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit-Edge-Mount__26700.1739477218.500.750.jpg?v=1785163393"},{"product_id":"bennett-bolt-electric-trim-tab-kit-6bt500134300-12-in-x-4-in-fits-trailered-boats-12-17-ft","title":"Bennett BOLT Electric Trim Tab Kit 6BT500134300 - 12 in x 4 in, Fits Trailered Boats 12-17 ft","description":"\u003cp\u003eThe Bennett 6BT500134300 BOLT Electric Trim Tab Kit is a 12 inch by 4 inch edge-style electric trim tab system built for trailered boats from 12 to 17 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. Bennett sizes trim tabs in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement, so this kit measures 12 inches wide by 4 inches deep. The BOLT system is intended for single actuator use, since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003eEach kit routes its wiring through the upper hinge, so no wiring is exposed to the marine environment, adding protection against corrosion and damage. The actuator housing is a water-tight black nylon design, and the main seal is positioned high on the actuator to guard against marine growth and water intrusion, two of the most common failure points on older trim tab systems. Bennett backs the electric actuators with a lifetime warranty. Installation is designed to be fast, since the actuator does not need to be disassembled during mounting.\u003c\/p\u003e\u003cp\u003eThe kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors. A trim tab control switch is not included and must be purchased separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Cross-Reference Part Number:\u003c\/strong\u003e 6BT-50013-43-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (Span):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth (Chord):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Water-tight black nylon actuator housing; stainless steel trim planes and mounting plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e 2 BEA2000 12-volt trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet, plus 6 feet wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 12 to 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Use:\u003c\/strong\u003e Single actuator use only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on electric actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailered boats 12 to 17 feet\u003c\/li\u003e\n\u003cli\u003eFlatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha Part Number 6BT-50013-43-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT124 trim tab kit designed for?\u003c\/strong\u003e This 12 inch by 4 inch BOLT kit (part 6BT500134300) is recommended for trailered boats from 12 to 17 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 12 x 4 trim tab size measured?\u003c\/strong\u003e Bennett lists trim tab sizes as span by chord, so 12 x 4 means a 12 inch side-to-side span and a 4 inch fore-to-aft chord for this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett 6BT500134300 kit include a control switch?\u003c\/strong\u003e No, the switch is sold separately from this trim tab kit; the kit itself includes only the actuators, trim planes, mounting plates, and wiring harnesses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit contains two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two of these actuators be run on the same trim tab?\u003c\/strong\u003e No, this BOLT electric trim tab system is intended for single actuator use per tab, since two electric actuators cannot be synchronized on one tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made from?\u003c\/strong\u003e The trim planes and mounting plates included with the 6BT500134300 kit are stainless steel, while the actuator housing is a water-tight black nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit protect against water intrusion?\u003c\/strong\u003e Wiring is routed through the upper hinge so it is never exposed to the marine environment, and the main seal on the actuator is positioned high to help guard against marine growth and water intrusion failures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a Yamaha equivalent part number for this Bennett trim tab kit?\u003c\/strong\u003e Yes, Bennett part 6BT500134300 (BOLT124) corresponds to Yamaha part number 6BT-50013-43-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this trim tab kit?\u003c\/strong\u003e The electric actuators in the Bennett 6BT500134300 kit carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on this kit?\u003c\/strong\u003e Each actuator comes with a 20 foot harness plus a 6 foot wire harness, both fitted with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult for this trim tab system?\u003c\/strong\u003e Installation is designed to be fast because the BOLT actuator does not need to be disassembled during mounting.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450601691,"sku":"BEN-BOLT124","price":577.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT124-12-inch-by-4-inch-BOLT-Electric-Trim-Tab-Kit__63161.1739477218.500.750.jpg?v=1785163393"},{"product_id":"bennett-bolt129-12-in-x-9-in-electric-trim-tab-kit-p-n-6bt500134400-for-14-18-ft-boats","title":"Bennett BOLT129 12 in x 9 in Electric Trim Tab Kit (P\/N 6BT500134400) for 14-18 ft Boats","description":"\u003cp\u003eThe Bennett BOLT129 is a 12 in x 9 in electric trim tab kit built to improve ride quality, handling, and performance on trailered boats from 14 to 18 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. The kit is more suitable for single actuator use.\u003c\/p\u003e\u003cp\u003eBennett trim tab sizing is expressed as span by chord: span is the side-to-side measurement and chord is the fore-to-aft measurement. This kit measures 12 inches wide by 9 inches deep. Each trim plane is stainless steel and mounts to a water-tight black nylon actuator that is designed for trouble-free operation. Wiring is threaded through the upper hinge so no wires are exposed to the marine environment, and the main seal is placed high on the actuator to help protect against marine growth and water intrusion failures, common causes of trim tab malfunction in older designs. The system is designed to run quieter than competing trim tab products, and installation is fast because the actuator does not require disassembly. The electric actuators carry a lifetime warranty and the kit is solidly constructed for a long service lifespan.\u003c\/p\u003e\u003cp\u003eThe kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes with mounting plates, two 20 ft harnesses with waterproof connectors, and 6 ft wire harnesses with waterproof connectors. A trim tab control switch is not included and must be purchased separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285600016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 14 to 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator:\u003c\/strong\u003e BEA2000 12-volt water-tight black nylon actuator (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Plane Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e Two 20 ft harnesses with waterproof connectors, plus 6 ft wire harnesses with waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Warranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 25 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for trailered boats from 14 to 18 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. More suitable for single actuator use.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT129 trim tab kit designed for?\u003c\/strong\u003e This kit is designed for trailered boats from 14 to 18 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the 12 in x 9 in dimensions on this trim tab kit mean?\u003c\/strong\u003e Bennett trim tab sizing is listed as span by chord: span is the side-to-side measurement and chord is the fore-to-aft measurement. The BOLT129 (P\/N 6BT500134400) measures 12 inches wide by 9 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes with mounting plates, two 20 ft harnesses with waterproof connectors, and 6 ft wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit come with a trim tab switch?\u003c\/strong\u003e No, the switch is sold separately and is not included with the Bennett BOLT129 12 in x 9 in trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this trim tab kit protect against water intrusion?\u003c\/strong\u003e Wiring is threaded through the upper hinge so no wires are exposed to the marine environment, the actuator is water-tight black nylon, and the main seal is placed high on the actuator to guard against marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT129 actuators?\u003c\/strong\u003e The electric actuators in this kit carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit difficult to install?\u003c\/strong\u003e Installation is fast because the actuator does not require disassembly, a feature built into the Bennett BOLT129 12 in x 9 in trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes are stainless steel and come with mounting plates as part of the BOLT129 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on this kit?\u003c\/strong\u003e The kit includes two 20 ft harnesses with waterproof connectors, plus 6 ft wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e The Bennett 12 in x 9 in BOLT Electric Trim Tab Kit (P\/N 6BT500134400) weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit meant for single or dual actuator setups?\u003c\/strong\u003e The Bennett BOLT129 system is more suitable for single actuator use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this trim tab kit?\u003c\/strong\u003e The manufacturer part number is 6BT500134400, corresponding to the Bennett BOLT129 12 in x 9 in Electric Trim Tab Kit.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450667227,"sku":"BEN-BOLT129","price":624.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT129-12-inch-by-9-inch-BOLT-Electric-Trim-Tab-Kit__41510.1739477218.500.750.jpg?v=1785163394"},{"product_id":"bennett-marine-bolt1812-18-x-12-inch-electric-trim-tab-kit-for-boats-26-to-36-feet","title":"Bennett Marine BOLT1812 18 x 12 Inch Electric Trim Tab Kit for Boats 26 to 36 Feet","description":"\u003cp\u003eThe Bennett Marine BOLT1812 is an 18 inch by 12 inch electric trim tab kit built for boats in the 26 to 36 foot range, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts. Trim tabs mount at the transom and allow the operator to adjust running trim, correcting bow rise, list, and porpoising to improve ride quality, handling, and fuel efficiency at speed. Bennett has manufactured electric trim tab systems since 1960 and the BOLT series was engineered to outperform and outlast older trim tab designs by addressing the water intrusion and part failures common in outdated technology.\u003c\/p\u003e\u003cp\u003eThe BOLT1812 kit routes its wiring through the upper hinge of each trim plane so no wiring is exposed to the marine environment, adding protection against corrosion and damage. Each kit uses a water-tight black nylon actuator for trouble-free operation and places the main seal high on the actuator body to guard against marine growth and water intrusion failures, and the design runs quieter than competing systems. Installation is fast because the actuator does not require disassembly during mounting. The stainless steel trim planes and mounting plates are solidly constructed for a long service life, and the electric actuators carry a lifetime warranty. A trim tab control switch is required to operate the system and is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e BOLT1812\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50013-47-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Plane Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness Length:\u003c\/strong\u003e 20 feet, plus 6 feet wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 26 to 36 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 25 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600054\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on electric actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Bennett BOLT1812 kit is designed for flatboats, center console boats, dual console boats, deck boats, bowriders, bass boats, and runabouts, and is recommended for trailered boats from 26 to 36 feet. It corresponds to Yamaha part number 6BT-50013-47-00.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bennett BOLT1812 trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the BOLT1812 kit?\u003c\/strong\u003e The BOLT1812 trim planes measure 18 inches wide by 12 inches deep, listed in Bennett's span by chord format where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BOLT1812 kit come with a control switch?\u003c\/strong\u003e No, the Bennett BOLT1812 electric trim tab kit does not include a control switch. The switch is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT1812 trim tab kit designed for?\u003c\/strong\u003e Bennett recommends the BOLT1812 18 x 12 inch kit for trailered boats from 26 to 36 feet, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT1812 trim tab kit weigh?\u003c\/strong\u003e The Bennett BOLT1812 electric trim tab kit weighs 25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the BOLT1812 kit?\u003c\/strong\u003e The Bennett BOLT1812 trim tab kit ships in a package measuring 25 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT1812 protect its wiring in a marine environment?\u003c\/strong\u003e Wires on the BOLT1812 are threaded through the upper hinge of the trim plane so they are never exposed to the marine environment, and the actuator is water-tight black nylon with a high-mounted main seal to resist marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the BOLT1812 and the smaller Bennett BOLT kits?\u003c\/strong\u003e The BOLT1812 measures 18 x 12 inches and is recommended for boats 26 to 36 feet, compared to the smaller BOLT129 (12 x 9 inches, 14 to 18 foot boats) and BOLT189 (18 x 9 inches, 20 to 23 foot boats). Choosing the correct size depends on matching the trim tab span and chord to the boat length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett BOLT1812 kit compatible with Yamaha applications?\u003c\/strong\u003e The Bennett BOLT1812 corresponds to Yamaha part number 6BT-50013-47-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of in the BOLT1812 kit?\u003c\/strong\u003e The BOLT1812 kit uses stainless steel trim planes and mounting plates for a solidly constructed, long service lifespan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett BOLT1812 installation difficult?\u003c\/strong\u003e Installation of the BOLT1812 is designed to be fast because the actuator does not require disassembly during mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT1812 trim tab kit?\u003c\/strong\u003e The BEA2000 electric actuators included in the Bennett BOLT1812 kit carry a lifetime warranty.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450732763,"sku":"BEN-BOLT1812","price":730.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT1812-18-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit__24058.1739477218.500.750.jpg?v=1785163394"},{"product_id":"bennett-bolt2412-electric-trim-tab-kit-24-x-12-inch-part-6bt500135100-for-trailered-boats-25-to-31-feet","title":"Bennett BOLT2412 Electric Trim Tab Kit, 24 x 12 Inch, Part 6BT500135100, for Trailered Boats 25 to 31 Feet","description":"\u003cp\u003eThe Bennett BOLT2412 Electric Trim Tab Kit is a 24 inch by 12 inch trim tab system built to improve boat ride quality, handling, and performance. It is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is more suitable for single actuator use on trailered boats from 25 to 31 feet. Bennett trim tab sizes are listed in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement -- this kit measures 24 inches wide (span) by 12 inches deep (chord).\u003c\/p\u003e\u003cp\u003eThe kit uses Bennett's BOLT technology, which routes wires through the upper hinge so none are exposed to the marine environment, adding protection and safety. A water-tight black nylon actuator provides trouble-free operation, and the main seal is placed high on the actuator to guard against marine growth and water intrusion failures common in older designs. The system also runs quieter than competing trim tab systems. Installation is fast because the actuator does not require disassembly, and the electric actuators carry a lifetime warranty. The kit includes two BEA2000 12-volt trim tab actuators and two stainless steel trim planes and mounting plates, along with 20 foot harnesses with waterproof connectors and 6 foot wire harnesses with waterproof connectors. A trim tab switch is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBennett Model Number:\u003c\/strong\u003e BOLT2412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50013-51-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600061\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 25 to 31 feet, trailered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet, plus 6 feet wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes and mounting plates, black nylon actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty for electric actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003cli\u003eTrailered boats 25 to 31 feet\u003c\/li\u003e\n\u003cli\u003eSingle actuator use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett BOLT2412 trim tab kit designed for?\u003c\/strong\u003e The Bennett BOLT2412 Electric Trim Tab Kit is designed to improve boat ride quality, handling, and performance, and is well suited for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts, recommended for trailered boats from 25 to 31 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the BOLT2412 kit?\u003c\/strong\u003e This kit measures 24 inches wide (span) by 12 inches deep (chord). Bennett sizes its trim tabs in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bennett BOLT2412 trim tab kit, part 6BT500135100?\u003c\/strong\u003e This kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a trim tab switch included with this kit?\u003c\/strong\u003e No. The Bennett BOLT2412 trim tab kit is sold without a switch, and the switch must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators power the BOLT2412 system?\u003c\/strong\u003e Two BEA2000 12-volt trim tab actuators drive the trim planes in this Bennett BOLT2412 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on the BOLT2412 kit?\u003c\/strong\u003e Each actuator comes with a 20 foot harness with waterproof connectors, plus a 6 foot wire harness with a waterproof connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the trim planes made of on this Bennett kit?\u003c\/strong\u003e Stainless steel trim planes and mounting plates are used on the Bennett BOLT2412, part 6BT500135100.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT2412 protect against water intrusion?\u003c\/strong\u003e Wires are threaded through the upper hinge so none are exposed to the marine environment, the actuator itself is a water-tight black nylon design, and the main seal is placed high on the unit to guard against marine growth and water intrusion failures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two actuators on the same tab be synchronized?\u003c\/strong\u003e No. The Bennett BOLT2412 system is more suitable for single actuator use, since two electric actuators on the same tab cannot be synchronized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT2412 kit?\u003c\/strong\u003e The electric actuators in the Bennett BOLT2412 kit, part 6BT500135100, carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT2412 trim tab kit weigh?\u003c\/strong\u003e The Bennett BOLT2412 Electric Trim Tab Kit weighs 31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the BOLT2412 recommended for?\u003c\/strong\u003e Bennett recommends the BOLT2412 for trailered boats between 25 and 31 feet, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450765531,"sku":"BEN-BOLT2412","price":774.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT2412-24-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit__84374.1739477219.500.750.jpg?v=1785163394"},{"product_id":"bennett-marine-bolt189-18-x-9-electric-trim-tab-kit-part-6bt500134900","title":"Bennett Marine BOLT189 18 x 9 Electric Trim Tab Kit - Part 6BT500134900","description":"\u003cp\u003eThe Bennett Marine BOLT189 is an 18 inch by 9 inch electric trim tab kit built to improve ride quality, handling, and performance on trailered boats in the 20 to 23 foot range. It is well suited to flatboats, center console boats, dual console boats, deck boats, bowriders, bass boats, and runabouts. The BOLT system routes wiring through the upper hinge so no wires are exposed to the marine environment, and it uses a water-tight black nylon actuator for trouble-free operation. The main seal is positioned high on the actuator to guard against marine growth and water intrusion failures, two of the most common causes of trim tab breakdowns in older designs. Installation is fast because the actuator does not require disassembly during mounting.\u003c\/p\u003e\u003cp\u003eEach BOLT189 kit includes two BEA2000 12-volt trim tab actuators and two stainless steel trim planes with mounting plates, giving the tabs solid, corrosion-resistant construction for a long service lifespan. The kit also comes with two 20 foot harnesses with waterproof connectors plus 6 foot wire harnesses with waterproof connectors. A control switch is not included and must be purchased separately. Bennett backs the electric actuators in this system with a lifetime warranty. Sizing on Bennett electric trim tabs is expressed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement; on the BOLT189, that is an 18 inch span and a 9 inch chord.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e BOLT189\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Size (Span x Chord):\u003c\/strong\u003e 18 inches x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (Span):\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth (Chord):\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 25 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator:\u003c\/strong\u003e (2) BEA2000 12-volt trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e (2) 20 foot harnesses with waterproof connectors, plus 6 foot wire harnesses with waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 to 23 feet (trailered boats)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on electric actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel and nylon\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailered boats 20 to 23 feet\u003c\/li\u003e\n\u003cli\u003eFlatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003cli\u003eRecommended for single actuator use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6BT-50013-49-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT189 trim tab kit designed for?\u003c\/strong\u003e The Bennett BOLT189 electric trim tab kit is recommended for trailered boats from 20 to 23 feet, including flatboats, center console boats, dual console boats, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the BOLT189 kit?\u003c\/strong\u003e The trim tabs measure 18 inches wide (span) by 9 inches deep (chord). Bennett lists trim tab sizing as span by chord, with span being the side-to-side measurement and chord being the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett BOLT189 kit include a control switch?\u003c\/strong\u003e No, the switch is sold separately and is not included with the Bennett BOLT189 electric trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the BOLT189 trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes with mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT189 trim tab kit weigh?\u003c\/strong\u003e The Bennett BOLT189 kit weighs 24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of the BOLT189 kit?\u003c\/strong\u003e The BOLT189 kit ships in a box measuring 25 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT system protect against water intrusion?\u003c\/strong\u003e Wires are threaded through the upper hinge so none are exposed to the marine environment, the actuator is a water-tight black nylon design, and the main seal is placed high on the actuator to help prevent marine growth and water intrusion failures, common causes of trim tab breakdowns in older systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett BOLT189 kit suitable for dual actuator synchronization?\u003c\/strong\u003e The BOLT189 electric trim tab system is more suitable for single actuator use per side rather than synchronized dual-actuator operation on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT189 electric actuators?\u003c\/strong\u003e Bennett provides a lifetime warranty on the electric actuators included in the BOLT189 trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett BOLT189 have a cross-reference part number?\u003c\/strong\u003e Yes, the Bennett BOLT189 (Bennett part number 6BT500134900) corresponds to Yamaha part number 6BT-50013-49-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult with the BOLT189 actuators?\u003c\/strong\u003e Installation is designed to be fast because the actuator does not require disassembly during mounting on the BOLT189 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are the BOLT189 trim planes made from?\u003c\/strong\u003e The BOLT189 kit uses stainless steel trim planes and mounting plates paired with a black nylon actuator housing.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450831067,"sku":"BEN-BOLT189","price":691.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT189-18-inch-by-9-inch-BOLT-Electric-Trim-Tab-Kit__27580.1739477218.500.750.jpg?v=1785163393"},{"product_id":"bennett-marine-bolt-24-x-9-electric-trim-tab-kit-mpn-6bt500135200-trailered-boats-22-27-ft","title":"Bennett Marine BOLT 24 x 9 Electric Trim Tab Kit, MPN 6BT500135200 - Trailered Boats 22-27 ft","description":"\u003cp\u003eThis Bennett Marine BOLT electric trim tab kit (MPN 6BT500135200) is a 24 inch by 9 inch trim tab set built for trailered boats from 22 to 27 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. The system is designed for single actuator use per side. Trim tab sizing follows the span x chord convention, where span is the side-to-side measurement (24 inches) and chord is the fore-to-aft measurement (9 inches).\u003c\/p\u003e\u003cp\u003eThe BOLT system routes wiring through the upper hinge so no wires are exposed to the marine environment, and uses a water-tight black nylon actuator for trouble-free operation. The main seal is positioned high on the actuator to protect against marine growth and water intrusion failures, addressing the common failure points of older electric trim tab designs. Installation is fast because the actuator does not need to be disassembled during the process.\u003c\/p\u003e\u003cp\u003eIncluded in the kit are two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors. A control switch is not included and must be purchased separately. The electric actuators carry a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BOLT Electric Trim Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes and mounting plates; nylon actuator housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 22 to 27 feet (trailered)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Types:\u003c\/strong\u003e Flatboats, center console, dual console, deck boats, bowriders, bass boats, runabouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet and 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Reference (Yamaha Part Number):\u003c\/strong\u003e 6BT-50013-52-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty (electric actuators)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuitable for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. Best suited for single actuator use and for trailered boats 22 to 27 feet.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6BT-50013-52-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett BOLT kit with MPN 6BT500135200?\u003c\/strong\u003e The trim tabs measure 24 inches wide by 9 inches deep. Bennett sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this Bennett trim tab kit designed for?\u003c\/strong\u003e This 24 x 9 BOLT electric trim tab kit is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is best suited for trailered boats 22 to 27 feet using a single actuator per side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this kit?\u003c\/strong\u003e No. The Bennett BOLT 24 x 9 trim tab kit (MPN 6BT500135200) is sold without a switch, which must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this Bennett trim tab kit cross-reference to a Yamaha part number?\u003c\/strong\u003e Yes, this kit corresponds to Yamaha part number 6BT-50013-52-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT system compare to older electric trim tab designs?\u003c\/strong\u003e Compared to older electric trim tab technology, the Bennett BOLT system reduces water intrusion and the part malfunctions common to outdated designs, while running quieter than competing systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to the actuators in this kit?\u003c\/strong\u003e The BEA2000 electric actuators included with this Bennett BOLT 24 x 9 kit carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes and mounting plates in this kit are stainless steel, paired with a water-tight black nylon actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT 24 x 9 trim tab kit weigh?\u003c\/strong\u003e This trim tab kit (MPN 6BT500135200) weighs 27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit difficult to install?\u003c\/strong\u003e Installation is fast because the actuator does not need to be disassembled during the process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two actuators be synced together with this kit?\u003c\/strong\u003e No. The Bennett BOLT 24 x 9 kit is best suited for single actuator use per side rather than synchronized dual-actuator setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat protects this trim tab actuator from water intrusion?\u003c\/strong\u003e The actuator is water-tight black nylon with a high-mounted main seal, and its wiring is routed through the upper hinge so no wires are exposed to the marine environment.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450863835,"sku":"BEN-BOLT249","price":730.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT249-24-inch-by-9-inch-BOLT-Electric-Trim-Tab-Kit__83682.1739477218.500.750.jpg?v=1785163394"},{"product_id":"bennett-6-x-12-bolt-electric-trim-tab-kit-edge-mount-yamaha-6bt-50013-53-00-equivalent","title":"Bennett 6\" x 12\" BOLT Electric Trim Tab Kit - Edge Mount (Yamaha 6BT-50013-53-00 Equivalent)","description":"\u003cp\u003eThe Bennett BOLT612ED is a 6 inch by 12 inch electric trim tab kit built with an Edge Mount design for boats with limited vertical transom space. Trim tab sizing is expressed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement, so this kit's 6 inch span and 12 inch chord tabs are sized for smaller transoms and trailered boats. Trim tabs mount at the stern and adjust boat trim in the water to help balance loads, get the boat on plane faster, and improve efficiency and ride quality.\u003c\/p\u003e\u003cp\u003eThis kit's Edge Mount hinge is adjustable and requires less than 6.5 inches of vertical transom space to install, making it a fit for transoms where a standard mount trim tab actuator will not clear. The tabs turn up for added strength and use piano-hinged backing plates. Two BEA2000 12-volt trim tab actuators drive the stainless steel trim planes, and the actuator housing is a water-tight black nylon design with wiring routed through the upper hinge so no wires are exposed to the marine environment. The main seal is placed high on the actuator to resist marine growth and water intrusion failures.\u003c\/p\u003e\u003cp\u003eThe Bennett BOLT612ED is intended for single actuator use, since two electric actuators cannot be synchronized on the same tab, and is suited to trailered boats from 17 to 28 feet. It corresponds to Yamaha part number 6BT-50013-53-00. The kit includes two 20 foot wiring harnesses and 6 foot actuator harnesses with waterproof connectors; a control switch is sold separately. The kit is backed by a 5 year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBennett Model:\u003c\/strong\u003e BOLT612ED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Edge Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Vertical Transom Space Required:\u003c\/strong\u003e less than 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator:\u003c\/strong\u003e BEA2000 12-volt trim tab actuator (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Plane Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 17 to 28 feet (trailered boats)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Use:\u003c\/strong\u003e Single actuator use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet with waterproof connectors, plus 6 feet actuator wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 year manufacturer's warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No, sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600290\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for trailered boats 17 to 28 feet, for single actuator use per tab. Corresponds to Yamaha part number 6BT-50013-53-00.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha 6BT-50013-53-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett BOLT612ED kit?\u003c\/strong\u003e The Bennett BOLT612ED Edge Mount kit ships with trim tabs measuring 6 inches wide by 12 inches deep, listed in span by chord format where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit designed for?\u003c\/strong\u003e This Bennett edge mount kit is designed for trailered boats from 17 to 28 feet and is intended for single actuator use, since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical transom space does the BOLT612ED kit need?\u003c\/strong\u003e Less than 6.5 inches of vertical transom space is required to install the Bennett BOLT612ED trim tab kit, making it suited to transoms with limited vertical clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this kit?\u003c\/strong\u003e No switch is included with the Bennett BOLT612ED trim tab kit; the rocker switch is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The Bennett BOLT612ED kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this trim tab kit have a Yamaha equivalent part number?\u003c\/strong\u003e Yes, this Bennett edge mount trim tab kit corresponds to Yamaha part number 6BT-50013-53-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT612ED kit?\u003c\/strong\u003e A 5 year manufacturer's warranty covers the Bennett BOLT612ED electric trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Edge Mount design differ from a standard mount trim tab?\u003c\/strong\u003e The Edge Mount design uses an adjustable upper hinge built for transoms with limited vertical space, and the tabs turn up for added strength with piano-hinged backing plates, unlike a standard mount hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes on the Bennett BOLT612ED kit are stainless steel, paired with a water-tight black nylon actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the actuator wires exposed to water on this kit?\u003c\/strong\u003e No, the wires on the Bennett BOLT612ED kit are threaded through the upper hinge so none are exposed to the marine environment, which helps prevent water intrusion failures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two of these trim tabs share one actuator setup?\u003c\/strong\u003e Each Bennett BOLT612ED tab runs on its own single electric actuator, since the system is built for single actuator use per tab and two electric actuators cannot be synchronized on one tab.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450896603,"sku":"BEN-BOLT612ED","price":640.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT612ED-6-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit-Edge-Mount__53036.1739462535.500.750.jpg?v=1785163395"},{"product_id":"bennett-bolt912ed-electric-trim-tab-kit-9-x-12-edge-mount-part-6bt500135400","title":"Bennett BOLT912ED Electric Trim Tab Kit, 9 x 12 Edge Mount, Part 6BT500135400","description":"\u003cp\u003eThe Bennett BOLT912ED is a 9 inch by 12 inch electric trim tab kit built around an edge mount design for boats with limited vertical transom space. Trim tab sizing follows Bennett's span by chord format, meaning the tabs measure 9 inches side to side (span) and 12 inches fore to aft (chord). The edge mount configuration uses an adjustable upper hinge that requires only 6.39 inches of vertical transom clearance to install, and the tabs themselves turn up for added strength with piano-hinged backing plates. This kit is intended for trailered boats between 17 and 28 feet, and it is designed for single-actuator use per tab since two electric actuators cannot be synchronized on the same trim tab.\u003c\/p\u003e\u003cp\u003eEach kit includes two BEA2000 12-volt actuators housed in a water-tight black nylon casing. Wiring is concealed and protected as it runs through the upper hinge, leaving no exposed wires in the marine environment, and the main seal is mounted high on the actuator to guard against marine growth and water intrusion. The actuators produce up to 750 pounds of actuation and return force, drawing 10 amps at 250 pounds of load and up to 30 amps at full rated force, and connect through Deutsch DT Series 13 amp waterproof connectors. The kit ships with stainless steel trim planes and mounting plates, two 20 foot main harnesses, and 6 foot actuator harnesses, all with waterproof connectors. A control switch is not included and must be purchased separately. The kit is backed by a 5 year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Size (Span x Chord):\u003c\/strong\u003e 9 inches x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Edge Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Transom Space Required:\u003c\/strong\u003e 6.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Length:\u003c\/strong\u003e 13.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Stroke:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Force (Actuation and Return):\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 10 amps at 250 pounds, 30 amps at 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Connector:\u003c\/strong\u003e Deutsch DT Series, 13 amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness Length:\u003c\/strong\u003e 20 feet main harness with 6 foot actuator harness, waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Plane Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Housing Material:\u003c\/strong\u003e Black nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant, water-tight actuator seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 year manufacturer's warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50013-54-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailered boats 17 to 28 feet in length\u003c\/li\u003e\n\u003cli\u003eSingle-actuator installations (two electric actuators cannot be synchronized on one tab)\u003c\/li\u003e\n\u003cli\u003eTransoms with limited vertical space (requires 6.39 inches of vertical clearance)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett BOLT912ED kit, part number 6BT500135400?\u003c\/strong\u003e The trim tabs measure 9 inches by 12 inches, sized as span (side to side) by chord (fore to aft). This edge mount kit, Bennett part 6BT500135400, uses the BOLT912ED design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Bennett BOLT912ED 9 x 12 trim tab kit designed for?\u003c\/strong\u003e This kit is designed for trailered boats between 17 and 28 feet in length, and it is intended for single-actuator installations since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical transom space does this trim tab kit need?\u003c\/strong\u003e The Bennett BOLT912ED edge mount kit requires 6.39 inches of vertical transom space, under the 6.5 inch clearance needed for standard installations, making it suited to transoms with limited vertical room.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 6BT500135400?\u003c\/strong\u003e The kit ships with two BEA2000 12-volt trim tab actuators, two stainless steel trim planes with mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot actuator wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett BOLT912ED kit include a control switch?\u003c\/strong\u003e No, a control switch is sold separately from the Bennett BOLT912ED trim tab kit; only the actuators, trim planes, and harnesses are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes (tabs) in the Bennett BOLT912ED kit are stainless steel, paired with mounting plates and piano-hinged backing plates on the tab itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and electrical connectors does the BOLT912ED actuator use?\u003c\/strong\u003e Each BEA2000 actuator in this kit runs on 12 volts and terminates in a Deutsch DT Series 13 amp waterproof connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Edge Mount design different from a standard mount trim tab kit?\u003c\/strong\u003e The Edge Mount design used on part 6BT500135400 has an adjustable upper hinge built for transoms with limited vertical space, and the tabs turn up for added strength with piano-hinged backing plates, features not found on a standard mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much force do the BOLT912ED actuators produce?\u003c\/strong\u003e The actuators are rated for 750 pounds of actuation and return force, drawing 10 amps at 250 pounds of load and up to 30 amps at the full 750 pound rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit waterproof?\u003c\/strong\u003e Yes, the Bennett BOLT912ED actuator uses a water-tight black nylon housing with the main seal positioned high on the unit to resist marine growth and water intrusion, and all harness connectors are waterproof.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT912ED trim tab kit?\u003c\/strong\u003e Bennett covers this kit, part 6BT500135400, with a 5 year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I upgrade from a Lenco trim tab system to this Bennett kit?\u003c\/strong\u003e Bennett offers a separate Lenco-to-BOLT conversion kit that lets boaters replace Lenco actuators with Bennett BOLT actuators using existing mounting holes, though that conversion kit is a different product from the BOLT912ED 9 x 12 edge mount kit itself.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450929371,"sku":"BEN-BOLT912ED","price":643.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT912ED-9-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit-Edge-Mount__76780.1739477219.500.750.jpg?v=1785163395"},{"product_id":"bennett-complete-sport-10-x-12-inch-hydraulic-trim-tab-kit-m120-for-boats-20-23-feet","title":"Bennett Complete Sport 10 x 12 Inch Hydraulic Trim Tab Kit (M120) for Boats 20-23 Feet","description":"\u003cp\u003eThe Bennett Complete Sport 10\" x 12\" Hydraulic Trim Tab Kit (M120) is a complete hydraulic trim tab system built to help a boat get on plane faster and stay on plane at intermediate speeds. Staying on plane longer improves fuel efficiency and speed, while the tabs can also correct uneven loading by lifting the side of the boat that is weighed down more than the other. This kit is sized for boats 20 to 23 feet and is recommended for use on flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003eEach kit includes two trim plane assemblies and two A1200SRC hydraulic actuators. The actuators are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tabs into position. All hydraulic lines and wires for the actuators are internal, concealed by the upper hinge, so they are not exposed to harsh marine environments. Power comes from a V351HPU1 hydraulic power unit, controlled at the helm by a Euro Style Rocker Control Unit that includes its own wiring. A hardware bag and 20 feet of hydraulic tubing are included for a complete installation. The system is easy to install and service and requires minimal maintenance over its lifespan. It is backed by a 5 Year No-Hassle Warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500422200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e M120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 to 23 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Material:\u003c\/strong\u003e Nylon\/fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e A1200SRC (quantity 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Unit:\u003c\/strong\u003e Euro Style Rocker Control Unit with wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year No-Hassle Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285146606\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 20 to 23 feet in length\u003c\/li\u003e\n\u003cli\u003eSuited to flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett M120 Complete Sport 10 x 12 Hydraulic Trim Tab Kit designed to do?\u003c\/strong\u003e It is a complete hydraulic trim tab system that helps a boat get on plane faster and stay on plane at intermediate speeds, which improves fuel efficiency and speed and can correct uneven loading by lifting the side of the boat that sits lower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Bennett M120 hydraulic trim tab kit made for?\u003c\/strong\u003e This 10 inch by 12 inch trim tab kit is recommended for boats 20 to 23 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bennett M120 trim tab kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two A1200SRC hydraulic actuators, one V351HPU1 hydraulic power unit, a Euro Style Rocker Control Unit with wiring, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the trim tab actuators made of?\u003c\/strong\u003e The two A1200SRC actuators included with the M120 kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hydraulic lines and wires exposed on the Bennett M120 trim tabs?\u003c\/strong\u003e No. On the M120 kit, all hydraulic lines and wires for the actuators are internal and concealed by the upper hinge, so they are not exposed to harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of boats can use the Bennett M120 Sport Trim Tab Kit?\u003c\/strong\u003e Bennett recommends this kit for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Bennett M120 kit control uneven boat loading?\u003c\/strong\u003e If one side of the boat is weighed down more than the other, the M120 trim tabs correct the imbalance by providing lift on the opposite side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat control unit comes with the Bennett M120 hydraulic trim tab kit?\u003c\/strong\u003e The M120 kit ships with a Euro Style Rocker Control Unit, including its wiring, for operating the trim tabs from the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett M120 trim tab kit weigh?\u003c\/strong\u003e The complete Bennett M120 10 x 12 hydraulic trim tab kit weighs 20.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much maintenance does the Bennett M120 trim tab system require?\u003c\/strong\u003e Bennett designed the M120 hydraulic trim tabs to be easy to install and service, and they require minimal maintenance during their lifespan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett M120 Complete Sport Trim Tab Kit?\u003c\/strong\u003e The Bennett M120 kit is backed by a 5 Year No-Hassle Warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bennett M120 different from the Bennett M80 trim tab kit?\u003c\/strong\u003e The M120 uses 10 inch by 12 inch trim tabs for boats 20 to 23 feet, while the Bennett M80 uses smaller 8 inch by 10 inch trim tabs for boats 17 to 20 feet.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451191515,"sku":"BEN-M120","price":852.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/M120Kit__94460.1739460029.500.750.jpg?v=1785163399"},{"product_id":"bennett-marine-6bt501107900-m120obi-sport-10-x-12-inch-hydraulic-trim-tab-kit-with-all-in-one-control","title":"Bennett Marine 6BT501107900 M120OBI Sport 10 x 12 Inch Hydraulic Trim Tab Kit with All-in-One Control","description":"\u003cp\u003eThe Bennett Marine M120OBI Sport Hydraulic Trim Tab Kit (6BT501107900) is a complete 10 inch x 12 inch hydraulic trim tab system built for boats 20 to 23 feet. It uses Bennett's sport batwing tab design, which provides 30% more lift than conventional trim tabs and is ideal for boats with limited transom space. On the water, the tabs help a boat get on plane faster and stay on plane at intermediate speeds, correct uneven loads and side-to-side listing, reduce pounding, eliminate porpoising, and improve forward visibility and safety while also increasing fuel efficiency.\u003c\/p\u003e\u003cp\u003eThe kit includes two 10 inch x 12 inch trim tab plane assemblies driven by two A1200SRC hydraulic actuators, which are strong, flexible nylon and fiberglass hydraulic cylinders that push the tabs into position. A V351HPU1 hydraulic power unit, 20 feet of hydraulic tubing, and all mounting hardware are included. All hydraulic lines and wires for the actuators are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments and reducing maintenance needs over the life of the system.\u003c\/p\u003e\u003cp\u003eThis kit also includes Bennett's All-in-One Indicator Control, a stand-alone helm control with no external control box required. It features convenient All Up and All Down buttons, trim tab position LEDs, and auto tab retraction so the tabs raise automatically when the ignition is powered off. It is recommended for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT501107900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBennett Part Number:\u003c\/strong\u003e M120OBI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50042-25-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 to 23 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 27 x 15 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon and fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Unit:\u003c\/strong\u003e All-in-One Indicator Control with All Up and All Down buttons and auto tab retraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e (2) A1200SRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600573\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tabs; 3 year warranty on the All-in-One control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett M120OBI kit?\u003c\/strong\u003e Each trim tab plane in the Bennett Marine M120OBI kit (6BT501107900) measures 10 inches wide by 12 inches deep, and the kit includes two of them, one per side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is this trim tab kit designed for?\u003c\/strong\u003e The Bennett M120OBI 10 x 12 inch hydraulic trim tab kit is sized for boats 20 to 23 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett M120OBI kit include a helm control?\u003c\/strong\u003e Yes, this kit includes Bennett's All-in-One Indicator Control, a stand-alone helm control with All Up and All Down buttons, trim tab position LEDs, and auto tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is everything included in the box?\u003c\/strong\u003e The 6BT501107900 kit includes two 10 x 12 inch trim tab plane assemblies, two A1200SRC hydraulic actuators, one V351HPU1 hydraulic power unit, 20 feet of hydraulic tubing, mounting hardware, and the All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e The Bennett M120OBI Sport Hydraulic Trim Tab Kit weighs 23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the sport batwing design different from a standard Bennett trim tab?\u003c\/strong\u003e The batwing tab design used on the Bennett M120OBI provides 30% more lift than conventional trim tabs and is built for boats with limited transom space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hydraulic lines and wiring exposed to the water?\u003c\/strong\u003e No. On the Bennett M120OBI kit, all hydraulic lines and wires for the actuators run internally and are concealed by the upper hinge, protecting them from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the actuators made of?\u003c\/strong\u003e The A1200SRC hydraulic actuators included with the Bennett M120OBI kit are built from strong, flexible nylon and fiberglass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is this Bennett trim tab kit recommended for?\u003c\/strong\u003e Bennett recommends this sport trim tab kit for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Bennett M120OBI trim tab kit?\u003c\/strong\u003e The trim tabs in the 6BT501107900 kit carry a limited lifetime warranty, and the included All-in-One Indicator Control carries a 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim tab position show at the helm?\u003c\/strong\u003e Yes, the All-in-One Indicator Control included with this kit has trim tab position LEDs so you can always see where the tabs are set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the tabs retract automatically?\u003c\/strong\u003e Yes, the All-in-One control on the Bennett M120OBI kit includes auto tab retraction, so the tabs raise automatically when the ignition is powered off.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451224283,"sku":"BEN-M120OBI","price":1311.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/M120OBI__59393.1725462375.500.750.jpg?v=1785163398"},{"product_id":"bennett-m80-complete-sport-8-x-10-hydraulic-trim-tab-kit-for-boats-17-20-ft","title":"Bennett M80 Complete Sport 8\" x 10\" Hydraulic Trim Tab Kit for Boats 17-20 ft","description":"\u003cp\u003eThe Bennett M80 Complete Sport Hydraulic Trim Tab Kit is a full boat trim tab system built to help your boat get on plane faster and stay on plane at intermediate speeds. By keeping the hull on plane longer, the M80 system improves fuel efficiency and speed while also giving you a way to correct uneven loading -- if one side of your boat sits lower than the other, the tabs provide lift on the opposite side to level the ride and improve visibility and safety at the helm.\u003c\/p\u003e\u003cp\u003eEach M80 kit includes two 8 inch wide by 10 inch deep trim tab planes driven by two A1200SRC hydraulic actuators. These actuators are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tabs into position, and all of the hydraulic lines and wiring run internally, concealed by the upper hinge, so they are not exposed to harsh marine environments. A Euro Style Rocker Control Unit with wiring is included to operate the system from the helm, along with the V351HPU1 hydraulic power unit, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003eThis kit is sized for boats 17 to 20 feet and is recommended for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers. It is easy to install and service and requires minimal maintenance over its lifespan, and it is backed by a 5 Year No-Hassle Warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500423200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Size:\u003c\/strong\u003e 8 inches wide x 10 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 17 to 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Material:\u003c\/strong\u003e Nylon\/fiberglass hydraulic cylinders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e A1200SRC (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Unit:\u003c\/strong\u003e Euro Style Rocker Control Unit with wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year No-Hassle Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 trim plane assemblies, 2 A1200SRC hydraulic actuators, 1 V351HPU1 hydraulic power unit, 1 Euro Style Rocker Control Unit with wiring, 1 hardware bag, 20 feet of hydraulic tubing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bennett M80 trim tab kit?\u003c\/strong\u003e The Bennett M80 Complete Sport Hydraulic Trim Tab Kit (part number 6BT500423200) includes two 8 inch x 10 inch trim plane assemblies, two A1200SRC hydraulic actuators, one V351HPU1 hydraulic power unit, a Euro Style Rocker Control Unit with wiring, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the M80 kit designed for?\u003c\/strong\u003e Boats between 17 and 20 feet are the recommended range for the Bennett M80 8 inch x 10 inch trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big are the trim tabs in this kit?\u003c\/strong\u003e Each trim tab in the Bennett M80 kit measures 8 inches wide by 10 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hydraulic lines and wires exposed to the elements?\u003c\/strong\u003e No. On the Bennett M80 system all hydraulic lines and wires run internally and are concealed by the upper hinge, keeping them protected from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem do these trim tabs solve if my boat lists to one side?\u003c\/strong\u003e Uneven loading that causes a boat to list to one side can be corrected with the Bennett M80 trim tabs, which provide lift on the opposite side to level the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett M80 trim tab kit?\u003c\/strong\u003e A 5 Year No-Hassle Warranty covers the Bennett M80 Complete Sport Hydraulic Trim Tab Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat control unit operates the M80 trim tabs?\u003c\/strong\u003e A Euro Style Rocker Control Unit, included with wiring, operates the Bennett M80 hydraulic trim tab system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the actuators made of?\u003c\/strong\u003e The two A1200SRC hydraulic actuators included with the Bennett M80 kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of boats can use this trim tab kit?\u003c\/strong\u003e The Bennett M80 kit is recommended for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the M80 trim tab kit weigh?\u003c\/strong\u003e The Bennett M80 Complete Sport Hydraulic Trim Tab Kit weighs 17.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill installing this kit improve fuel efficiency?\u003c\/strong\u003e Yes, staying on plane longer with the Bennett M80 trim tabs increases fuel efficiency along with speed and visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hydraulic tubing included with the kit?\u003c\/strong\u003e The Bennett M80 kit includes 20 feet of hydraulic tubing along with the trim plane assemblies, actuators, and power unit.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451257051,"sku":"BEN-M80","price":802.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-M80-Complete-Sport-Hydraulic-Trim-Tab-Kit__61915.1739477220.500.750.jpg?v=1785163400"},{"product_id":"bennett-slt10-self-leveling-trim-tab-system-10-inch-x-10-inch-for-boats-16-feet-and-up","title":"Bennett SLT10 Self-Leveling Trim Tab System, 10 Inch x 10 Inch, for Boats 16 Feet and Up","description":"\u003cp\u003eThe Bennett SLT10 Self-Leveling Trim Tab System is a complete, self-adjusting trim tab kit designed for boats 16 feet and up, including ribs, skiffs, and runabouts. Unlike manually switched trim tabs, the SLT10 reacts automatically to boat speed and water pressure using a durable spring-action system: at slower speeds, while the boat is trying to get on plane, the actuators hold the trim tabs down to lift the stern and put the boat into planing attitude; once the boat is up to speed, water pressure pushes the tabs back up. The result is a boat that gets on plane faster, uses less fuel, and rides smoother, with reduced pounding and engine laboring and the elimination of porpoising and chine walking.\u003c\/p\u003e\u003cp\u003eThe kit includes two 10 inch by 10 inch trim tabs built from 14-gauge stainless steel and joined with Bennett's exclusive interlocking hinge, along with two actuators and a full set of stainless steel mounting hardware - no plastic parts are used anywhere in the system. Installation requires no work inside the boat and can typically be completed in under an hour with only a few basic tools, making the SLT10 a practical upgrade for both DIY boaters and marine technicians. The system is backed by a 5-year limited warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT501095200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e SLT10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Self-Leveling Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Size:\u003c\/strong\u003e 10 inches x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 16 feet and up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Types:\u003c\/strong\u003e Ribs, skiffs, and runabouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e 2 trim tabs, 2 actuators, stainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Material:\u003c\/strong\u003e 14-gauge stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinge Type:\u003c\/strong\u003e Interlocking hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator System:\u003c\/strong\u003e Spring-action, self-leveling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Painted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11 inches x 10 inches x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-year limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285146804\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 16 feet and up\u003c\/li\u003e\n\u003cli\u003eBest suited to ribs, skiffs, and runabouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett SLT10 Self-Leveling Trim Tab System do?\u003c\/strong\u003e It automatically adjusts trim tab position based on boat speed and water pressure, which is how the Bennett SLT10 Self-Leveling Trim Tab System improves planing, ride quality, and overall performance while reducing porpoising and chine walking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the SLT10 recommended for?\u003c\/strong\u003e Boats 16 feet and up, particularly ribs, skiffs, and runabouts, are the recommended fit for the Bennett SLT10 Self-Leveling Trim Tab System.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs on the SLT10?\u003c\/strong\u003e Each Bennett SLT10 trim tab measures 10 inches by 10 inches, and the kit includes two of them made from 14-gauge stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the Bennett SLT10 kit?\u003c\/strong\u003e Two 14-gauge stainless steel trim tabs with Bennett's interlocking hinge, two actuators, and all stainless steel mounting hardware are included in the Bennett SLT10 kit, with no plastic components used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does installation take?\u003c\/strong\u003e Under an hour is the typical installation time for the Bennett SLT10, and no work inside the boat is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett SLT10 self-leveling?\u003c\/strong\u003e Yes, the Bennett SLT10 uses a spring-action system that automatically adjusts the trim tabs as boat speed and water pressure change, without manual switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett SLT10 made of?\u003c\/strong\u003e Stainless steel is used throughout the Bennett SLT10, including the 14-gauge trim tabs, actuators, and all mounting hardware, with no plastic parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat performance benefits should I expect?\u003c\/strong\u003e Faster planing, improved fuel efficiency, reduced pounding and engine laboring, and elimination of porpoising and chine walking are the main benefits of installing the Bennett SLT10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett SLT10 weigh?\u003c\/strong\u003e 8.7 pounds is the weight of the Bennett SLT10 Self-Leveling Trim Tab System.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the SLT10?\u003c\/strong\u003e A 5-year limited warranty covers the Bennett SLT10 Self-Leveling Trim Tab System.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller version for smaller boats?\u003c\/strong\u003e Boats up to 16 feet are better suited to the Bennett SLT6, a separate 6 inch x 8 inch trim tab kit with its own part number, rather than the SLT10, which is sized for boats 16 feet and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is the SLT10 best suited for?\u003c\/strong\u003e Ribs, skiffs, and runabouts 16 feet and up are best suited to the Bennett SLT10 Self-Leveling Trim Tab System, according to Bennett's sizing recommendations.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451388123,"sku":"BEN-SLT10","price":216.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-SLT10-10-inch-by-10-inch-Self-Leveling-Trim-Tab-System__90304.1739477219.500.750.jpg?v=1785163401"},{"product_id":"bennett-marine-slt6-6-x-8-self-leveling-trim-tab-system-for-boats-up-to-16-feet","title":"Bennett Marine SLT6 6\" x 8\" Self-Leveling Trim Tab System for Boats Up to 16 Feet","description":"\u003cp\u003eThe Bennett Marine SLT6 is a complete self-leveling trim tab system built for smaller boats that need an affordable, simple way to improve ride and performance. The kit pairs two 14-gauge stainless steel trim tabs, sized 6 inches wide by 8 inches deep, with two composite actuators, all connected through Bennett's exclusive interlocking hinge design. Unlike manually adjusted trim tabs, the SLT6 reacts automatically to boat speed and water pressure: the actuators hold the tabs down at slower speeds to help the stern rise, then let water pressure lift the tabs as the boat comes up to speed, adjusting trim continuously without any driver input.\u003c\/p\u003e\u003cp\u003eInstallation requires no work inside the boat. Only the two actuators and two tabs need to be mounted at the transom, and the job typically takes less than an hour for a DIYer or marine technician. All mounting hardware included in the kit is stainless steel, with no plastic components. The Bennett SLT6 is recommended for boats up to 16 feet, including ribs, skiffs, and runabouts, where it helps the boat get on plane faster, improves fuel efficiency, reduces pounding and engine laboring, and helps eliminate porpoising and chine walking. The system is backed by a 5-year limited warranty on all components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT501095100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SLT6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Self-Leveling Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Size:\u003c\/strong\u003e 6 inches wide by 8 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e Up to 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Gauge:\u003c\/strong\u003e 14-gauge stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless steel, no plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinge:\u003c\/strong\u003e Bennett exclusive interlocking hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e 2 trim tabs, 2 actuators, stainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-year limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285146705\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size trim tabs come with the Bennett SLT6 Self-Leveling Trim Tab System?\u003c\/strong\u003e The Bennett SLT6 kit includes two 14-gauge stainless steel trim tabs measuring 6 inches wide by 8 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Bennett SLT6 recommended for?\u003c\/strong\u003e The Bennett SLT6 is recommended for boats up to 16 feet, and is especially suited for ribs, skiffs, and runabouts. Review your boat size and transom setup to confirm compatibility before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bennett SLT6 kit?\u003c\/strong\u003e Each Bennett SLT6 kit includes two 14-gauge stainless steel trim tabs with Bennett's interlocking hinge, two composite actuators, and all stainless steel mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett SLT6 easy to install?\u003c\/strong\u003e Yes, the Bennett SLT6 installs in under an hour with only a few tools and requires no work inside the boat, since only the two actuators and two tabs mount at the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Bennett SLT6 trim tabs made from?\u003c\/strong\u003e The trim tabs in the Bennett SLT6 are made from 14-gauge stainless steel, and all included mounting hardware is stainless steel as well, with no plastic parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Bennett SLT6 self-leveling system work?\u003c\/strong\u003e The SLT6 uses a spring-action design where the actuators hold the tabs down at slower speeds to help the stern rise, then water pressure lifts the tabs as the boat reaches speed, so trim adjusts automatically without driver input.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat performance benefits does the Bennett SLT6 provide?\u003c\/strong\u003e Boaters using the SLT6 can expect faster planing, improved fuel efficiency, reduced pounding and engine laboring, and less porpoising and chine walking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Bennett SLT6 and the Bennett SLT10?\u003c\/strong\u003e The SLT6 uses 6 inch by 8 inch tabs and is recommended for boats up to 16 feet, while the Bennett SLT10 uses larger 10 inch by 10 inch tabs and is recommended for boats 16 feet and up. These are separate SKUs, so boat length should determine which kit to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett SLT6 come with a warranty?\u003c\/strong\u003e Yes, the Bennett SLT6 Self-Leveling Trim Tab System is backed by a 5-year limited warranty covering all components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is used with the Bennett SLT6?\u003c\/strong\u003e The Bennett SLT6 kit uses all stainless steel mounting hardware, with no plastic components, for durability in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett SLT6 Self-Leveling Trim Tab System weigh?\u003c\/strong\u003e The Bennett SLT6 weighs 7 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett SLT6 a genuine Bennett Marine product?\u003c\/strong\u003e Yes, the SLT6 is a genuine Bennett Marine self-leveling trim tab system, part number 6BT501095100, built with the same interlocking hinge and stainless steel construction used across Bennett's trim tab lineup.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451453659,"sku":"BEN-SLT6","price":147.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-SLT6-6-inch-by-8-inch-Self-Leveling-Trim-Tab-System__07955.1739460035.500.750.jpg?v=1785163402"},{"product_id":"bennett-v351hpu1-trim-tab-hydraulic-power-unit-12-volt","title":"Bennett V351HPU1 Trim Tab Hydraulic Power Unit, 12 Volt","description":"\u003cp\u003eThe Bennett V351HPU1 is a 12 volt hydraulic power unit built to generate the hydraulic pressure that raises and lowers Bennett hydraulic trim tabs. This compact powerhouse directs fluid to the tab actuators through two internal solenoid valves, which lock tightly to hold the tabs firmly in position and prevent water pressure from pushing them back up. It has the strength to lower and hold even the largest trim tabs in place, making it a reliable replacement power unit for an existing hydraulic trim tab setup.\u003c\/p\u003e\u003cp\u003eThe unit is protected by a sturdy Lexan plastic cover that shields the electro-hydraulic components from occasional wash-down, while the translucent fiberglass reservoir lets you check the fluid level at a glance. It is designed to run on automatic transmission fluid and installs easily with a mounting bracket (model H1179, sold separately). The kit includes the pump, two internal solenoid valves, the reservoir, and the cover. This 12 volt model can be identified by the black plotting at the end of its solenoid valves, distinguishing it from Bennett's 24 volt power unit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500867300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Dimensions:\u003c\/strong\u003e 4 inches x 7-1\/2 inches x 5-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Lexan plastic cover; fiberglass reservoir\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Fluid:\u003c\/strong\u003e Automatic transmission fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Pump, two internal solenoid valves, reservoir, and cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Valves:\u003c\/strong\u003e Two internal solenoid valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Mounting Bracket:\u003c\/strong\u003e Model H1179 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab System:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentification:\u003c\/strong\u003e 12V model has black plotting at the end of the solenoid valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285321607\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with Bennett hydraulic trim tab systems. This is the 12 volt power unit; a separate 24 volt version (V351HPU2, identified by tan plotting on the solenoid valves) is available for 24 volt setups.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBENV351HPU\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett V351HPU1 hydraulic power unit do?\u003c\/strong\u003e The Bennett V351HPU1 creates hydraulic pressure to raise and lower hydraulic trim tabs. It directs fluid to the actuators through two internal solenoid valves to provide controlled trim tab operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this hydraulic power unit?\u003c\/strong\u003e The V351HPU1 kit includes the pump, two internal solenoid valves, the reservoir, and the cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the trim tabs from dropping on their own?\u003c\/strong\u003e Two solenoid valves in the V351HPU1 lock tightly to hold the trim tabs in place and prevent water pressure from retracting them, even on larger tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fluid does this power unit use?\u003c\/strong\u003e The Bennett V351HPU1 is designed to run on automatic transmission fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and mounting details for this power unit?\u003c\/strong\u003e The V351HPU1 pump measures 4 inches by 7-1\/2 inches by 5-1\/2 inches, and a sturdy mounting bracket (model H1179) is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the 12 volt or 24 volt version?\u003c\/strong\u003e This is the 12 volt Bennett hydraulic power unit; it is identified by black plotting at the end of the solenoid valves. Bennett's 24 volt power unit (V351HPU2) uses tan plotting instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I tell the 12 volt and 24 volt Bennett power units apart?\u003c\/strong\u003e Look at the solenoid valves: the V351HPU1 12 volt unit has black plotting at the end of its valves, while the 24 volt V351HPU2 has tan plotting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the mounting bracket included with the power unit?\u003c\/strong\u003e No, the H1179 mounting bracket used with the V351HPU1 is sold separately from the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Lexan cover on this unit be replaced separately?\u003c\/strong\u003e Yes, a replacement Lexan cover is available and fits the V351HPU1 as well as the V351HPU2, DAHPU, and DAHPU2 hydraulic power units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hydraulic power unit weigh?\u003c\/strong\u003e The Bennett V351HPU1 weighs 5.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this unit protected from water exposure during wash-downs?\u003c\/strong\u003e The V351HPU1 has a sturdy Lexan plastic cover that protects the electro-hydraulic components from occasional wash-down, and a translucent fiberglass reservoir for checking fluid at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this power unit as a replacement for a failed original unit?\u003c\/strong\u003e Yes, the Bennett V351HPU1 is a replacement power unit for existing 12 volt Bennett hydraulic trim tab setups, providing the strength to lower and hold even the largest tabs in place.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451748571,"sku":"BEN-V351HPU1","price":387.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/V351HPU__20202.1737851651.500.750.jpg?v=1785163406"},{"product_id":"bennett-trim-tab-hydraulic-power-unit-24-volt-v351hpu2","title":"Bennett Trim Tab Hydraulic Power Unit - 24 Volt (V351HPU2)","description":"\u003cp\u003eThis Bennett Trim Tab Hydraulic Power Unit is a 24 volt replacement power unit for hydraulic trim tab systems. It creates the hydraulic pressure needed to raise and lower trim tabs, directing fluid through internal motor valves to the tab actuators. The kit includes the pump, motor valves, fluid reservoir, and protective cover as a complete replacement unit, so a failed or worn power unit can be swapped out without replacing the entire trim tab system.\u003c\/p\u003e\u003cp\u003eThe unit is built with enough strength to lower and hold even the largest trim tabs firmly in place. Based on the compatibility of the matching Lexan replacement cover (which is listed as fitting both the 12 volt and 24 volt Bennett power units), this 24 volt unit uses the same sturdy Lexan plastic cover to protect the internal components from occasional wash-down, along with a translucent fiberglass reservoir that lets you check the fluid level at a glance. This 24 volt model is identified by tan plotting at the end of the solenoid valves, distinguishing it from the 12 volt version, which uses black plotting - an important detail to check before ordering to be sure you get the correct voltage unit for your boat's electrical system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500784500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e V351HPU2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab System:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Pump, Motor Valves, Reservoir, Cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Material:\u003c\/strong\u003e Lexan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReservoir:\u003c\/strong\u003e Translucent Fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Wattage:\u003c\/strong\u003e 240 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Input Voltage:\u003c\/strong\u003e 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Voltage:\u003c\/strong\u003e 120 Volts (AC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Method:\u003c\/strong\u003e Air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Hardwired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 14 x 14 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid Valve Marking:\u003c\/strong\u003e Tan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett V351HPU2 hydraulic power unit do?\u003c\/strong\u003e The Bennett V351HPU2 creates hydraulic pressure to raise and lower hydraulic trim tabs, directing fluid to the tab actuators through its internal motor valves. It is the 24 volt version of Bennett's hydraulic power unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this power unit 12 volt or 24 volt?\u003c\/strong\u003e This is the 24 volt version of the Bennett hydraulic power unit (V351HPU2). It is identified by tan plotting at the end of the solenoid valves, while the 12 volt version uses black plotting, so check the marking before ordering to get the correct voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the V351HPU2 power unit?\u003c\/strong\u003e The kit includes the pump, motor valves, fluid reservoir, and cover, giving you a complete replacement hydraulic power unit for a 24 volt trim tab system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this unit hold large trim tabs in place?\u003c\/strong\u003e Yes, the Bennett 24 volt hydraulic power unit has strength sufficient to lower and hold even the largest trim tabs firmly in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this power unit?\u003c\/strong\u003e The Bennett V351HPU2 24 volt hydraulic power unit measures 14 x 14 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 24 volt Bennett hydraulic power unit weigh?\u003c\/strong\u003e This Bennett trim tab hydraulic power unit (part number 6BT500784500) weighs 6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cover made of on this hydraulic power unit?\u003c\/strong\u003e The unit uses a sturdy Lexan plastic cover, the same cover design used across Bennett's hydraulic power units, to protect the internal components from occasional wash-down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I check the fluid level in the reservoir?\u003c\/strong\u003e The V351HPU2 uses a translucent fiberglass reservoir, so you can check the fluid level at a glance without opening the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat electrical connection does this power unit use?\u003c\/strong\u003e The Bennett V351HPU2 hydraulic power unit uses a hardwired connector type rather than a plug-in connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a replacement unit or does it include a full trim tab kit?\u003c\/strong\u003e The V351HPU2 is a replacement hydraulic power unit only - it includes the pump, motor valves, reservoir, and cover, but not the trim planes or actuators of a complete trim tab system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 12 volt and 24 volt Bennett power units?\u003c\/strong\u003e Both share the same overall design, but the 24 volt V351HPU2 is marked with tan plotting on the solenoid valves versus black plotting on the 12 volt V351HPU1, and the two units run on different input voltages, so they are not interchangeable.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451781339,"sku":"BEN-V351HPU2","price":413.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/V351HPU2__68931.1737864597.500.750.jpg?v=1785163406"},{"product_id":"bennett-marine-v351lk-lenco-to-bennett-trim-tab-conversion-kit-with-hydraulic-power-unit","title":"Bennett Marine V351LK Lenco to Bennett Trim Tab Conversion Kit with Hydraulic Power Unit","description":"\u003cp\u003eThe Bennett V351LK is a Lenco to Bennett trim tab conversion kit designed as an economical, easy-installation alternative to replacing a worn Lenco actuator or purchasing an entirely new trim tab system. The kit lets you keep your existing Lenco trim planes in place, so there is no need to patch or re-drill mounting holes on your transom.\u003c\/p\u003e\u003cp\u003eThe V351LK includes custom adapter plates that mate the Bennett actuator and trim plane assembly to your existing Lenco trim planes, a Bennett hydraulic power unit, two standard actuators, a water resistant rocker switch control, and all hardware and wiring required for installation. Because the kit runs on Bennett's hydraulic power unit, it delivers the strength to lower and hold trim tabs in place while giving boat owners a straightforward path off an aging Lenco system without a full teardown of the transom.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V351LK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285328750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 13.5 x 13.5 x 13.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Hydraulic Power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Custom adapter plates for actuator and trim plane assembly, Bennett hydraulic power unit, two standard actuators, water resistant rocker switch control, hardware and all wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned to convert existing Lenco trim tab systems to Bennett hydraulic operation, using your existing Lenco trim planes.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this conversion kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett V351LK conversion kit let me do?\u003c\/strong\u003e The V351LK lets you convert an existing Lenco trim tab system to Bennett hydraulic operation while reusing your existing Lenco trim planes, so you avoid replacing a worn Lenco actuator or buying an entirely new trim tab system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need to drill new holes in my transom to install the V351LK?\u003c\/strong\u003e No. The Bennett V351LK kit is built to use your existing Lenco trim planes and mounting points, so there is no need to patch or re-drill mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the V351LK kit?\u003c\/strong\u003e The kit includes custom adapter plates for the actuator and trim plane assembly, a Bennett hydraulic power unit, two standard actuators, a water resistant rocker switch control, and all hardware and wiring needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the V351LK come with its own hydraulic power unit?\u003c\/strong\u003e Yes, the Bennett V351LK includes a Bennett hydraulic power unit as part of the conversion kit, along with two standard actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the V351LK conversion kit weigh?\u003c\/strong\u003e The Bennett V351LK Lenco to Bennett conversion kit weighs 13 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the V351LK?\u003c\/strong\u003e The V351LK ships in a package measuring 13.5 x 13.5 x 13.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the rocker switch control in the V351LK kit?\u003c\/strong\u003e The water resistant rocker switch control included in the V351LK kit is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the V351LK a full trim tab system or a conversion kit?\u003c\/strong\u003e The V351LK is a conversion kit, not a full trim tab system. It is meant to switch an existing Lenco setup over to Bennett hydraulic power using the boat's existing Lenco trim planes, rather than requiring a full replacement system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the V351LK require any Lenco parts to remain on the boat?\u003c\/strong\u003e Yes, the V351LK conversion kit is designed to work with your existing Lenco trim planes, which remain in place; the Lenco actuator and controls are what get replaced by the Bennett components in the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power source does the V351LK actuator use?\u003c\/strong\u003e The Bennett V351LK kit operates on hydraulic power, supplied by the included Bennett hydraulic power unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs wiring included with the V351LK kit?\u003c\/strong\u003e Yes, all wiring and hardware needed to complete the installation are included with the Bennett V351LK conversion kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the V351LK instead of replacing the Lenco actuator directly?\u003c\/strong\u003e The V351LK is positioned as an economical, easy-installation alternative to replacing a Lenco actuator or buying an entire new trim tab system, since it reuses the existing Lenco trim planes and mounting holes.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451814107,"sku":"BEN-V351LK","price":482.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/V351LK__78561.1722350615.500.750.jpg?v=1785163407"},{"product_id":"lenco-15001-101-electric-trim-tab-kit-9-x-12-inch-stainless-steel-boats-16-25-ft","title":"Lenco 15001-101 Electric Trim Tab Kit, 9 x 12 Inch, Stainless Steel, Boats 16-25 ft","description":"\u003cp\u003eThe Lenco 15001-101 is a 9 inch by 12 inch electric trim tab kit built to improve how a boat rides and performs on the water. Trim tabs help a boat run smoother, drier, and faster, and Lenco's ballscrew-driven actuator design delivers instant response that is more reliable and up to three times more powerful than typical hydraulic trim tab systems, while staying oil-free and easy to service. This kit is ideal for center console boats and cuddy cabin cruisers in the 16 to 25 foot range.\u003c\/p\u003e\u003cp\u003eEach kit includes two trim tab planes measuring 9 inches deep by 12 inches wide, machined from 12 gauge 304 stainless steel for strength and corrosion resistance in marine environments. The two electric actuators come with 6 foot leads and Deutsch plugs, paired with 20 foot actuator extension wiring harnesses for routing power to the helm area. Upper mounting brackets with gland seals and lower mounting brackets are included, along with stainless steel mounting hardware and a Lenco owner's manual and installation manual. This kit is sold without a control switch, so a compatible Lenco switch must be purchased separately to operate the tabs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15001-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Dimensions:\u003c\/strong\u003e 9 inches deep x 12 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlane Material:\u003c\/strong\u003e 12 gauge 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Design:\u003c\/strong\u003e Ballscrew, instant response\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 16 feet to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Type:\u003c\/strong\u003e Center console boats and cuddy cabin cruisers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 12.75 x 12.75 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.92 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004220\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in the Lenco 15001-101 kit?\u003c\/strong\u003e The planes in the Lenco 15001-101 kit measure 9 inches deep by 12 inches wide and are made from 12 gauge 304 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Lenco 15001-101 trim tab kit?\u003c\/strong\u003e This kit includes two 9 inch x 12 inch 12-gauge 304 stainless steel trim tab planes, two actuators with 6 foot leads and Deutsch plugs, two 20 foot actuator extension wiring harnesses, two upper mounting brackets with gland seals, two lower mounting brackets, stainless steel mounting hardware, and an owner's and installation manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15001-101 kit come with a control switch?\u003c\/strong\u003e No. The 15001-101 is sold without a switch, so a compatible switch must be purchased separately to operate the trim tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this trim tab kit designed for?\u003c\/strong\u003e The Lenco 15001-101 9 x 12 electric trim tab kit is recommended for boats from 16 to 25 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab planes made from?\u003c\/strong\u003e The trim tab planes in the 15001-101 kit are constructed from 12 gauge 304 stainless steel for strength and corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does Lenco's ballscrew trim tab design compare to hydraulic systems?\u003c\/strong\u003e Lenco's ballscrew actuator design used in the 15001-101 kit is more reliable and up to three times more powerful than typical hydraulic trim tab systems, with instant response and oil-free operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of boats is the 15001-101 kit best suited for?\u003c\/strong\u003e This kit is ideal for center console boats and cuddy cabin cruisers in the 16 to 25 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15001-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco 15001-101 electric trim tab kit weighs 14.92 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator wiring components in this kit?\u003c\/strong\u003e Each actuator in the 15001-101 kit has a 6 foot lead with a Deutsch plug, and is paired with a 20 foot actuator extension wiring harness for routing to the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting hardware comes with the Lenco 15001-101 kit?\u003c\/strong\u003e The kit includes stainless steel mounting hardware along with upper mounting brackets featuring gland seals and lower mounting brackets for installing the trim tab planes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15001-101 kit include installation instructions?\u003c\/strong\u003e Yes, the 15001-101 kit includes a Lenco owner's manual and installation manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Lenco 15001-101 trim tab kit?\u003c\/strong\u003e The Lenco 15001-101 electric trim tab kit is black.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994648795,"sku":"LEN-15001-101","price":684.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15001-101-9x12-electric-trim-tab-kit-without-switch__46478.1747363764.500.750.jpg?v=1785164589"},{"product_id":"lenco-15000-101-9-x-9-electric-trim-tab-kit-without-switch-for-boats-14-18","title":"Lenco 15000-101 9\" x 9\" Electric Trim Tab Kit without Switch for Boats 14' - 18'","description":"\u003cp\u003eThe Lenco 15000-101 is a 9 inch by 9 inch electric trim tab kit built around Lenco's original ballscrew actuator design, the design that started the electric trim tab category. Trim tabs make one of the biggest differences in how a boat rides, helping it plane faster, ride drier, and handle more predictably in chop. Lenco's ballscrew system is oil-free and environmentally conscious, and compared to typical hydraulic trim tab systems it is more reliable, up to three times more powerful, and gives an instant response that feels natural at the helm.\u003c\/p\u003e\u003cp\u003eEach trim tab plane in this kit measures 9 inches deep by 9 inches wide and is laser cut from 12 gauge 304 stainless steel for corrosion resistance in salt and fresh water. The kit is sized for boats from 14 feet to 18 feet, making it a fit for smaller center console boats and cuddy cabin cruisers. This kit does not include a trim tab switch; a switch must be purchased separately to complete the installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15000-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 874847004213\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Size:\u003c\/strong\u003e 9 inches x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Material:\u003c\/strong\u003e 12 gauge 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12-Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 14 feet to 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 12.75 inches x 12.75 inches x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 14 feet to 18 feet in length\u003c\/li\u003e\n\u003cli\u003eIdeal for center console boats and cuddy cabin cruisers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in the Lenco 15000-101 kit?\u003c\/strong\u003e The trim tab planes in the Lenco 15000-101 kit measure 9 inches deep by 9 inches wide, made from 12 gauge 304 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15000-101 kit include a switch?\u003c\/strong\u003e No, the Lenco 15000-101 is sold without a switch. A trim tab switch must be purchased separately to operate this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Lenco 15000-101 trim tab kit designed for?\u003c\/strong\u003e This kit is recommended for boats 14 feet to 18 feet in length, and is well suited to center console boats and cuddy cabin cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Lenco 15000-101 trim tab kit?\u003c\/strong\u003e The kit includes two 9 inch by 9 inch 12 gauge 304 stainless steel trim tab planes, two actuators with 6 foot leads and Deutsch plugs, two 20 foot actuator extension wiring harnesses, two upper mounting brackets with gland seal, two lower mounting brackets, stainless steel mounting hardware, and a Lenco owner's and installation manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab planes made from?\u003c\/strong\u003e The Lenco 15000-101 trim tab planes are made from 12 gauge 304 stainless steel, chosen for strength and corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Lenco ballscrew design compare to hydraulic trim tab systems?\u003c\/strong\u003e Lenco's ballscrew actuator design used in the 15000-101 kit is more reliable and up to three times more powerful than typical hydraulic trim tab systems, with an instant, responsive feel and no hydraulic oil involved.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator leads and extension harnesses?\u003c\/strong\u003e Each actuator in the 15000-101 kit has a 6 foot lead with a Deutsch plug, and the kit includes 20 foot actuator extension wiring harnesses to reach the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Lenco 15000-101 trim tab kit run on?\u003c\/strong\u003e The Lenco 15000-101 is a 12-Volt electric trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the Lenco 15000-101 kit?\u003c\/strong\u003e Yes, stainless steel mounting hardware is included along with the upper and lower mounting brackets needed to install the 15000-101 trim tab planes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Lenco 15000-101 and larger Lenco trim tab kits?\u003c\/strong\u003e The 15000-101 uses 9 inch by 9 inch trim tab planes for boats 14 to 18 feet, while larger Lenco kits use bigger planes, such as 9 inch by 12 inch or 9 inch by 18 inch, sized for longer boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15000-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco 15000-101 electric trim tab kit weighs 15 pounds.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994681563,"sku":"LEN-15000-101","price":666.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-15000-101-9-inch-by-9-inch-Electric-Trim-Tab-Kit-without-Switch__59666.1739477224.500.750.jpg?v=1785164590"},{"product_id":"lenco-15008-101-12v-12-x-18-standard-mount-trim-tab-kit-without-switch","title":"Lenco 15008-101 12V 12\" x 18\" Standard Mount Trim Tab Kit without Switch","description":"\u003cp\u003eThe Lenco 15008-101 is a 12 volt, 12\" x 18\" standard mount electric trim tab kit built on Lenco's original ballscrew trim tab design, the design credited with starting the electric trim tab revolution. Trim tabs are one of the most effective upgrades for how a boat rides and performs, and this kit is suited to common boat styles including center consoles, fishing boats, and cuddy cabin cruisers, with a recommended range of 14 feet to 69 feet in length.\u003c\/p\u003e\u003cp\u003eEach of the two trim tab blades is cut from 12 gauge 304 stainless steel for corrosion resistance and long-term durability in harsh marine environments, with a 5\/8 inch flared trailing edge and a 1\/8 inch hinge pin. Lenco's ballscrew actuator design is built to be more reliable and up to three times more powerful than typical hydraulic trim tab systems, with instant response and user-friendly operation, and it is oil-free with no hydraulic fluid to leak or maintain.\u003c\/p\u003e\u003cp\u003eThis kit includes two 12-gauge stainless steel blades, two 15054-001 actuators with 6 foot leads and Deutsch connectors, two 30133-103 actuator extension wiring harnesses at 20 feet, two 15085-001 upper mounting brackets with gland seal, two 50014-001D lower mounting brackets, and stainless steel mounting hardware. It does not include a helm control switch, so you can choose and install the switch or control interface that fits your helm layout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15008-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Electric Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinge Height:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Transom Height:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material:\u003c\/strong\u003e 12 gauge 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrailing Edge:\u003c\/strong\u003e 5\/8 inch flared\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinge Pin:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 14 feet to 69 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Not included, sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004299\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades on the Lenco 15008-101 kit?\u003c\/strong\u003e The Lenco 15008-101 kit includes two trim tab blades measuring 12 inches long by 18 inches wide, cut from 12 gauge 304 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a control switch?\u003c\/strong\u003e No, the 15008-101 kit does not include a helm control switch. It is sold without a switch so you can select the control interface that fits your boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Lenco 15008-101 trim tab kit designed for?\u003c\/strong\u003e This standard mount trim tab kit is recommended for boats from 14 feet to 69 feet in length, covering center consoles, fishing boats, and cuddy cabin cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this trim tab kit run on?\u003c\/strong\u003e The 15008-101 kit is a 12 volt electric trim tab system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab blades made from?\u003c\/strong\u003e The blades are made from 12 gauge, 304 stainless steel, chosen for corrosion resistance and strength in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator leads and extension harnesses?\u003c\/strong\u003e Each 15054-001 actuator has a 6 foot lead with a Deutsch connector, and each kit includes a 30133-103 actuator extension wiring harness measuring 20 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Lenco 15008-101 trim tab kit?\u003c\/strong\u003e The kit includes two 12-gauge stainless steel trim tab blades, two actuators with 6 foot leads and Deutsch connectors, two 20 foot actuator extension harnesses, two upper mounting brackets with gland seal, two lower mounting brackets, and stainless steel mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum transom height required for this trim tab kit?\u003c\/strong\u003e The 15008-101 standard mount trim tab kit requires a minimum transom height of 14 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hinge height and hinge pin size on this trim tab kit?\u003c\/strong\u003e The 15008-101 kit has a 2 inch hinge height and uses a 1\/8 inch hinge pin, with a 5\/8 inch flared trailing edge on the blades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a standard mount or edge mount trim tab kit?\u003c\/strong\u003e The 15008-101 is a standard mount trim tab kit, based on Lenco's original ballscrew trim tab design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use an electric ballscrew trim tab system instead of a hydraulic one?\u003c\/strong\u003e Lenco's ballscrew actuator design used in the 15008-101 kit is built to be more reliable and up to three times more powerful than typical hydraulic trim tab systems, with instant response and no hydraulic fluid to maintain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15008-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco 15008-101 trim tab kit weighs 4.1 pounds.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994714331,"sku":"LEN-15008-101","price":778.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15008-101-standard-mount-12v-trim-tab-kit-12x18__72581.1747363763.500.750.jpg?v=1785164594"},{"product_id":"lenco-9-in-x-18-in-electric-trim-tab-kit-without-switch-304-stainless-steel-fits-boats-20-30-ft","title":"Lenco 9 in x 18 in Electric Trim Tab Kit without Switch - 304 Stainless Steel, Fits Boats 20-30 ft","description":"\u003cp\u003eThis electric trim tab kit gives boats 20 to 30 feet in length smoother, drier, faster rides with better control at speed and while getting on plane. Trim tabs are one of the single biggest factors in how a boat rides and performs, and this kit brings Lenco's original ballscrew-driven design to center console boats and cuddy cabin cruisers. Unlike typical hydraulic trim tab systems, Lenco's ballscrew actuators are more reliable, up to three times more powerful, and respond instantly to input, all without the mess or maintenance of hydraulic oil.\u003c\/p\u003e\u003cp\u003eThe kit is built around two 9 inch deep by 18 inch wide trim tab planes formed from 12 gauge 304 stainless steel for long-term corrosion resistance in salt and fresh water environments. Each plane is driven by a dedicated electric actuator with a 6 foot lead and a Deutsch plug connector, extended by a 20 foot wiring harness so the actuator can reach the helm area. Upper mounting brackets include a gland seal to help keep water out at the transom penetration, while the lower brackets secure the actuator to the trim tab plane. Stainless steel mounting hardware and a full owner's and installation manual are included for a complete transom-to-actuator installation.\u003c\/p\u003e\u003cp\u003eThis kit is sold without a control switch, so a compatible switch must be purchased separately to operate the trim tabs. It is intended for boats in the 20 to 30 foot range, including center console boats and cuddy cabin cruisers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15002-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Dimensions:\u003c\/strong\u003e 9 inches deep x 18 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlane Material:\u003c\/strong\u003e 12 gauge 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e 15054-001, with 6 foot lead and Deutsch plug connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness:\u003c\/strong\u003e 30133-103, 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Mounting Bracket:\u003c\/strong\u003e 15085-001, with gland seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Mounting Bracket:\u003c\/strong\u003e 50014-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 feet to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Design:\u003c\/strong\u003e Ballscrew, oil-free electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004237\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this kit?\u003c\/strong\u003e The Lenco 15002-101 kit includes two trim tab planes measuring 9 inches deep by 18 inches wide, made from 12 gauge 304 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this trim tab kit?\u003c\/strong\u003e No, the Lenco 15002-101 electric trim tab kit is sold without a switch, so a compatible switch needs to be purchased separately to operate the tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is this trim tab kit designed for?\u003c\/strong\u003e This kit is recommended for boats 20 to 30 feet in length, including center console boats and cuddy cabin cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab planes made from?\u003c\/strong\u003e The trim tab planes are made from 12 gauge 304 stainless steel, chosen for its strength and corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Lenco 9 in x 18 in trim tab kit?\u003c\/strong\u003e The kit includes two 9 inch x 18 inch stainless steel trim tab planes, two 15054-001 actuators with 6 foot leads and Deutsch plugs, two 30133-103 actuator extension harnesses (20 feet each), two 15085-001 upper mounting brackets with gland seal, two 50014-001 lower mounting brackets, stainless steel mounting hardware, and an owner's\/installation manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does Lenco's ballscrew design compare to hydraulic trim tab systems?\u003c\/strong\u003e Lenco's ballscrew actuators, used in the 15002-101 kit, are more reliable than typical hydraulic trim tabs, up to three times more powerful, and provide instant response, all without hydraulic oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator extension wiring harnesses?\u003c\/strong\u003e Each 30133-103 actuator extension harness included in this kit is 20 feet long, allowing the actuators to be wired back to the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting brackets are used to install this trim tab kit?\u003c\/strong\u003e Installation uses 15085-001 upper mounting brackets with a gland seal and 50014-001 lower mounting brackets, both included with the 15002-101 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the trim tab planes in this kit corrosion resistant?\u003c\/strong\u003e Yes, the 9 inch x 18 inch trim tab planes are constructed from 12 gauge 304 stainless steel for corrosion resistance in salt and fresh water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the actuator lead on this trim tab kit?\u003c\/strong\u003e Each 15054-001 actuator in the kit has a 6 foot lead terminated with a Deutsch plug connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include mounting hardware?\u003c\/strong\u003e Yes, the Lenco 15002-101 kit comes with stainless steel mounting hardware for installing the planes, actuators, and brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this kit and Lenco's smaller 9 in x 12 in trim tab kit?\u003c\/strong\u003e The 15002-101 kit uses larger 9 inch x 18 inch planes and is recommended for boats 20 to 30 feet, while Lenco's 9 inch x 12 inch kit uses smaller planes recommended for boats in the 16 to 25 foot range.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994747099,"sku":"LEN-15002-101","price":794.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-15002-101-9-inch-by-18-inch-Electric-Trim-Tab-Kit-without-Switch__76286.1739477224.500.750.jpg?v=1785164589"},{"product_id":"lenco-15015-101-edge-mount-12-x-9-electric-trim-tab-kit-stainless-steel-no-switch","title":"Lenco 15015-101 Edge Mount 12\" x 9\" Electric Trim Tab Kit, Stainless Steel, No Switch","description":"\u003cp\u003eThe Lenco 15015-101 Edge Mount 12\" x 9\" Electric Trim Tab Kit gives boaters a way to correct running attitude, level out list caused by uneven loading, and get on plane faster and more efficiently. Trim tabs are one of the most impactful upgrades for how a boat rides and performs, and while some builders make them optional, they function as essential equipment on many hulls. This edge mount design is built specifically for applications where a lower actuator mounting height is required, making it a fit for center console boats and cuddy cabin cruisers from 14 to 18 feet in length.\u003c\/p\u003e\u003cp\u003eEach trim tab plane measures 12 inches deep by 9 inches wide and is constructed from 12-gauge 304 stainless steel with turned-up edges, giving the blades added strength and long-term corrosion resistance in saltwater and freshwater environments. The kit is powered by Lenco's instant-response electric actuators, each fitted with a 6-foot lead and Deutsch plug connector, plus a 20-foot actuator extension wiring harness for longer helm runs. Upper mounting brackets include a gland seal to keep water out of the transom penetration, and stainless steel lower mounting brackets complete the mounting hardware.\u003c\/p\u003e\u003cp\u003eThis kit does not include a control switch; a compatible Lenco switch must be purchased separately to operate the tabs from the helm.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15015-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Edge Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Dimensions:\u003c\/strong\u003e 12 inches deep x 9 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 12-gauge 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 14 feet to 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Type:\u003c\/strong\u003e Center console boats and cuddy cabin cruisers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 12.75 x 12.75 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.98 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004381\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 15015-101 trim tab kit designed for?\u003c\/strong\u003e The Lenco 15015-101 Edge Mount 12\" x 9\" Electric Trim Tab Kit is designed to improve ride quality, handling, and running attitude on boats where a lower actuator mounting height is needed, and it is recommended for center console boats and cuddy cabin cruisers from 14 to 18 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15015-101 kit include a switch?\u003c\/strong\u003e No, the 15015-101 kit is sold without a switch, so a compatible Lenco control switch must be purchased separately to operate the trim tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this kit?\u003c\/strong\u003e The trim tab planes in the Lenco 15015-101 kit measure 12 inches deep by 9 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Lenco 15015-101 trim tab planes made from?\u003c\/strong\u003e The planes are made from 12-gauge 304 stainless steel with turned-up edges for added strength and corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the 15015-101 kit?\u003c\/strong\u003e This kit includes two 12\" x 9\" 304 stainless steel trim tab planes, two actuators with 6-foot leads and Deutsch plugs, two 20-foot actuator extension wiring harnesses, two upper mounting brackets with gland seals, and two stainless steel lower mounting brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this an edge mount trim tab kit different from other mounting styles?\u003c\/strong\u003e The Lenco 15015-101 uses an edge mount design intended for applications where a lower actuator mounting height is required, and its plane edges are turned up for extra strength and durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage do the actuators in this kit run on?\u003c\/strong\u003e The actuators included with the Lenco 15015-101 trim tab kit operate on a 12-volt system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator leads and extension harnesses?\u003c\/strong\u003e Each actuator has a 6-foot lead with a Deutsch plug, and the kit includes a 20-foot actuator extension wiring harness for each side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Lenco 15015-101 kit recommended for?\u003c\/strong\u003e This kit is recommended for boats from 14 to 18 feet in length, including center console boats and cuddy cabin cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15015-101 trim tab kit weigh?\u003c\/strong\u003e The complete Lenco 15015-101 Edge Mount 12\" x 9\" Electric Trim Tab Kit weighs 16.98 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the mounting brackets included with this trim tab kit?\u003c\/strong\u003e Yes, the 15015-101 kit includes upper mounting brackets with gland seals and stainless steel lower mounting brackets, along with mounting hardware.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994779867,"sku":"LEN-15015-101","price":731.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-15015-101-Edge-Mount-12-inch-by-9-inch-Electric-Trim-Tab-Kit-without-Switch__61711.1739477224.500.750.jpg?v=1785164593"},{"product_id":"lenco-15016-101-edge-mount-12-x-12-inch-electric-trim-tab-kit-without-switch","title":"Lenco 15016-101 Edge Mount 12 x 12 Inch Electric Trim Tab Kit without Switch","description":"\u003cp\u003eThe Lenco 15016-101 is an edge mount electric trim tab kit built for boats where a lower actuator mounting height is needed, such as center console boats and cuddy cabin cruisers from 17 to 30 feet in length. Trim tabs are one of the biggest factors in how a boat rides and performs, helping correct bow rise, list, and porpoising, and improving handling, fuel economy, and comfort underway. While some boats offer them as an option, Lenco treats trim tabs as essential equipment alongside power trim and tilt.\u003c\/p\u003e\u003cp\u003eEach trim tab plane is formed from 12 gauge 304 stainless steel with turned up edges, giving the tabs added strength and outstanding corrosion resistance in marine environments. The planes measure 12 inches deep by 12 inches wide. The kit is powered by Lenco's instant response electric trim tab actuators for quick, precise adjustment.\u003c\/p\u003e\u003cp\u003eThis kit ships as a complete edge mount installation set but does not include a control switch, which is sold separately, so buyers can choose the switch or control system that fits their helm.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15016-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Edge Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Dimensions:\u003c\/strong\u003e 12 inches deep x 12 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 12 gauge 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 17 feet to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No, sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e 15054-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Connector:\u003c\/strong\u003e Deutsch plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness:\u003c\/strong\u003e 30133-103, 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Mounting Bracket:\u003c\/strong\u003e 15085-001 with gland seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Mounting Bracket:\u003c\/strong\u003e 50014-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004374\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for center console boats and cuddy cabin cruisers between 17 and 30 feet in length.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x 12 gauge 304 stainless steel 12 inch x 12 inch trim tab planes\u003c\/li\u003e\n\u003cli\u003e2 x 15054-001 actuators with 6 foot lead and Deutsch plugs\u003c\/li\u003e\n\u003cli\u003e2 x 30133-103 actuator extension wiring harnesses, 20 feet\u003c\/li\u003e\n\u003cli\u003e2 x 15085-001 upper mounting brackets with gland seal\u003c\/li\u003e\n\u003cli\u003e2 x 50014-001 lower mounting brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Lenco 15016-101 trim tab kit designed for?\u003c\/strong\u003e The Lenco 15016-101 edge mount trim tab kit is recommended for boats from 17 to 30 feet in length, including center console boats and cuddy cabin cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a trim tab switch?\u003c\/strong\u003e No. The Lenco 15016-101 ships without a control switch, so the switch must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this kit?\u003c\/strong\u003e Each trim tab plane in the 15016-101 kit measures 12 inches deep by 12 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Lenco 15016-101 trim tab planes made from?\u003c\/strong\u003e The planes are made from 12 gauge 304 stainless steel with turned up edges for outstanding corrosion resistance and strength in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'edge mount' mean for this trim tab kit?\u003c\/strong\u003e Edge mount describes a design intended for boat applications where a lower actuator mounting height is needed, which the 15016-101 provides along with turned up plane edges for added durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Lenco 15016-101 kit?\u003c\/strong\u003e The kit includes two 12 inch by 12 inch 12 gauge 304 stainless steel trim tab planes, two 15054-001 actuators with 6 foot leads and Deutsch plugs, two 30133-103 actuator extension wiring harnesses at 20 feet, two 15085-001 upper mounting brackets with gland seal, and two 50014-001 lower mounting brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast do the actuators on this trim tab kit respond?\u003c\/strong\u003e The 15016-101 kit uses Lenco's electric trim tab actuators, which are designed for instant response when adjusting trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit suitable for a center console boat?\u003c\/strong\u003e Yes, the Lenco 15016-101 is ideal for center console boats and cuddy cabin cruisers in the 17 to 30 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator wiring harnesses?\u003c\/strong\u003e The 15016-101 kit includes 30133-103 actuator extension wiring harnesses that are 20 feet long, along with 6 foot actuator leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this kit and Lenco's 12 inch by 9 inch or 12 inch by 18 inch edge mount kits?\u003c\/strong\u003e The 15016-101 uses 12 inch by 12 inch trim tab planes, sized for boats from 17 to 30 feet, while Lenco's smaller and larger edge mount kits use different plane widths sized for different boat length ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15016-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco 15016-101 electric trim tab kit weighs 19.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type is used on the trim tab actuators?\u003c\/strong\u003e The 15054-001 actuators included with the 15016-101 kit use Deutsch plug connectors on their 6 foot leads.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994812635,"sku":"LEN-15016-101","price":767.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-15016-101-Edge-Mount-12-inch-by-12-inch-Electric-Trim-Tab-Kit-without-Switch__59899.1739460047.500.750.jpg?v=1785164595"},{"product_id":"lenco-edge-mount-12-x-18-inch-electric-trim-tab-kit-without-switch-15017-101-for-boats-26-36-feet","title":"Lenco Edge Mount 12 x 18 Inch Electric Trim Tab Kit without Switch, 15017-101, for Boats 26-36 Feet","description":"\u003cp\u003eThe Lenco 15017-101 is an edge mount electric trim tab kit built to improve how a boat rides, handles, and performs on the water. Trim tabs let a boat operator adjust running angle to correct bow rise, reduce porpoising, and level the boat when weight is unevenly distributed, and edge mount kits like this one are designed for installations where a lower actuator mounting height is needed. This kit is sized for boats 26 to 36 feet and is well suited to center console boats and cuddy cabin cruisers.\u003c\/p\u003e\u003cp\u003eThe trim tab planes measure 12 inches deep by 18 inches wide and are constructed from 12 gauge 304 stainless steel with turned-up edges, giving the planes outstanding corrosion resistance and strength for continuous marine use. Each plane is driven by an instant-response electric actuator with a 6 foot lead and Deutsch plug connector, paired with a 20 foot actuator extension wiring harness for routing power to the helm area. Mounting hardware includes an upper mounting bracket with a gland seal and a lower mounting bracket for each side.\u003c\/p\u003e\u003cp\u003eThis kit is sold without a control switch, so a compatible trim tab switch must be purchased separately to operate the system. Everything needed to mount and wire the trim tab planes and actuators is included in the box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15017-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Edge mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Dimensions:\u003c\/strong\u003e 12 inches deep x 18 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 12 gauge 304 stainless steel with turned-up edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 26 feet to 36 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No, switch sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004398\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 15017-101 trim tab kit designed for?\u003c\/strong\u003e This edge mount electric trim tab kit is designed to improve boat ride quality, handling, and performance on boats where a lower actuator mounting height is needed. The Lenco 15017-101 is ideal for center console boats and cuddy cabin cruisers from 26 to 36 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in the 15017-101 kit?\u003c\/strong\u003e The trim tab planes in the Lenco 15017-101 kit measure 12 inches deep by 18 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a trim tab switch included with the Lenco 15017-101 kit?\u003c\/strong\u003e No, the Lenco 15017-101 edge mount trim tab kit is sold without a switch, so a control switch must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab planes made from?\u003c\/strong\u003e The trim tab planes in this Lenco kit are made from 12 gauge 304 stainless steel with turned-up edges for outstanding corrosion resistance and strength in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Lenco 15017-101 trim tab kit designed for?\u003c\/strong\u003e This kit is recommended for boats between 26 and 36 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Lenco 15017-101 trim tab kit?\u003c\/strong\u003e The kit includes two 12 inch by 18 inch 12 gauge 304 stainless steel trim tab planes, two actuators with 6 foot leads and Deutsch plugs, two 20 foot actuator extension wiring harnesses, two upper mounting brackets with gland seals, and two lower mounting brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the 15017-101 an edge mount trim tab kit?\u003c\/strong\u003e It is designed for boat applications where a lower actuator mounting height is needed, and the trim tab planes feature turned-up edges for added strength and durability in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator leads and extension harnesses on this kit?\u003c\/strong\u003e Each actuator has a 6 foot lead with a Deutsch plug, and each actuator extension wiring harness is 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15017-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco 15017-101 edge mount trim tab kit weighs 26.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the mounting brackets on the 15017-101 kit include a gland seal?\u003c\/strong\u003e Yes, the upper mounting brackets included with the Lenco 15017-101 kit have a gland seal, and lower mounting brackets are also included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs boat mounting hardware beyond the brackets included with the 15017-101 kit?\u003c\/strong\u003e The Lenco 15017-101 kit includes the upper and lower mounting brackets, actuators, extension harnesses, and trim tab planes needed to install the system; a control switch is sold separately.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994845403,"sku":"LEN-15017-101","price":900.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-15017-101-Edge-Mount-12-inch-by-18-inch-Electric-Trim-Tab-Kit-without-Switch__35997.1739477224.500.750.jpg?v=1785164594"},{"product_id":"lenco-15041-101-heavy-duty-performance-12-x-12-inch-electric-trim-tab-kit","title":"Lenco 15041-101 Heavy Duty Performance 12 x 12 Inch Electric Trim Tab Kit","description":"\u003cp\u003eThe Lenco 15041-101 Heavy Duty Performance Electric Trim Tab Kit is built for boats that need extra strength to hold trim in adverse conditions at higher speeds. Each kit supplies two 12 inch deep by 12 inch wide trim tab blades machined from 12-gauge 304 stainless steel and electro-polished for extreme corrosion resistance in marine environments. Power comes from a pair of XD Extreme Duty actuators, chosen for the added durability this heavy-duty kit is designed around, each fitted with a 6 foot lead and Deutsch connector for a secure, weatherproof electrical connection. A 20 foot actuator extension wiring harness is included with each actuator to reach from the transom to the helm area. Trim tabs remain one of the most effective ways to control a boat's running attitude, correcting bow rise, listing from uneven loads, and cavitation at speed, and this heavy duty configuration is intended for boats that put additional load on the tabs and actuators. The kit ships without a control switch, which is sold separately, and without boat mounting hardware, so installers should plan for both before starting the install. This is the actuator and blade assembly only; confirm your helm switch and mounting hardware needs ahead of installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15041-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Dimensions:\u003c\/strong\u003e 12 inches deep x 12 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material:\u003c\/strong\u003e 12-gauge 304 stainless steel, electro-polished finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e XD Extreme Duty Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet, with Deutsch connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Wiring Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Mounting Hardware:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 33.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004633\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades in the Lenco 15041-101 kit?\u003c\/strong\u003e The blades in the Lenco 15041-101 Heavy Duty Performance Trim Tab Kit are 12 inches deep by 12 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a control switch?\u003c\/strong\u003e No, the Lenco 15041-101 kit is sold without a switch; the trim tab switch must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the trim tab blades made from?\u003c\/strong\u003e 12-gauge 304 stainless steel that has been electro-polished for extreme corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs boat mounting hardware included with the 15041-101 kit?\u003c\/strong\u003e No, boat mounting hardware is not included with this trim tab kit and must be sourced separately for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of actuators come with the Heavy Duty Performance kit?\u003c\/strong\u003e Two XD Extreme Duty Actuators are included, each with a 6 foot lead and Deutsch connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the actuator extension wiring harnesses?\u003c\/strong\u003e Each of the two included actuator extension wiring harnesses is 20 feet long, allowing the run from the transom to the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Lenco 15041-101 Trim Tab Kit?\u003c\/strong\u003e The kit includes two 12 inch x 12 inch trim tab blades, two XD Extreme Duty actuators with 6 foot leads and Deutsch connectors, and two 20 foot actuator extension wiring harnesses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the Heavy Duty Performance kit over a standard trim tab kit?\u003c\/strong\u003e The 15041-101 kit is designed for boats that need extra strength, using XD Extreme Duty actuators to support the boat in adverse conditions at higher speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15041-101 trim tab kit weigh?\u003c\/strong\u003e The complete kit weighs 33.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these trim tabs corrode in saltwater use?\u003c\/strong\u003e The 12-gauge 304 stainless steel blades are electro-polished specifically for extreme corrosion resistance, making the 15041-101 kit suited to marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use my existing trim tab switch with this kit?\u003c\/strong\u003e Since the 15041-101 kit ships without a switch, an existing compatible trim tab switch can be wired in, or a switch can be purchased separately.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994878171,"sku":"LEN-15041-101","price":1360.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-Heavy-Duty-Performance-12-inch-by-12-inch-Electric-Trim-Tab-Kit__56473.1739477239.500.750.jpg?v=1785164595"},{"product_id":"lenco-extreme-duty-performance-19-in-x-14-in-electric-trim-tab-kit-part-15046-101-fits-boats-24-52-ft","title":"Lenco Extreme Duty Performance 19 in x 14 in Electric Trim Tab Kit, Part 15046-101, Fits Boats 24-52 ft","description":"\u003cp\u003eThe Lenco Extreme Duty Performance 19 in x 14 in Electric Trim Tab Kit (part 15046-101) is built for larger, faster boats that run in rough water. It is part of Lenco's XD series, engineered with thicker, stronger blades and heavier actuators than Lenco's standard trim tab lines so the system holds up under sustained high-speed operation. The trim tab blades measure 19 inches deep by 14 inches wide and are made from 12-gauge 304 stainless steel that has been electro-polished for extreme corrosion resistance in a saltwater environment. This kit is intended for boats between 24 feet and 52 feet in length.\u003c\/p\u003e\u003cp\u003eEach kit ships with two trim tab blades and four XD Extreme Duty actuators, along with 6 foot actuator leads terminated in Deutsch connectors for a sealed, plug-style electrical connection. The kit is sold without a trim switch, so a compatible switch must be purchased separately to control the tabs from the helm. Boat mounting hardware and the actuator extension wiring harness are also not included, so plan for those separately when budgeting for installation. Because the tabs are electrically actuated, they let the operator fine-tune running trim to correct bow rise, reduce porpoising, and improve visibility and fuel efficiency at speed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15046-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Dimensions:\u003c\/strong\u003e 19 inches deep x 14 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material:\u003c\/strong\u003e 12-gauge 304 stainless steel, electro-polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e 4 XD Extreme Duty actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet with Deutsch connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 24 feet to 52 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 27 inches x 18 inches x 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 65.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004688\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No, sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Mounting Hardware Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis trim tab kit is intended for boats between 24 feet and 52 feet in length. No specific make, engine, or model fitment is listed for this kit.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference or replacement part numbers are listed for this kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the blades on the Lenco 15046-101 trim tab kit?\u003c\/strong\u003e The blades on the Lenco Extreme Duty Performance trim tab kit, part 15046-101, measure 19 inches deep by 14 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat length is this trim tab kit designed for?\u003c\/strong\u003e This kit is intended for boats between 24 feet and 52 feet in length, reflecting the heavier-duty XD actuators used in the 15046-101 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15046-101 kit include a trim switch?\u003c\/strong\u003e No. The Lenco 15046-101 Extreme Duty Performance trim tab kit is sold without a switch, so a compatible trim switch must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab blades made from?\u003c\/strong\u003e The blades in this kit are made from 12-gauge 304 stainless steel that has been electro-polished for extreme corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many actuators come with this trim tab kit?\u003c\/strong\u003e Four XD Extreme Duty actuators are included with the Lenco 15046-101 kit, along with 6 foot actuator leads terminated in Deutsch connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs boat mounting hardware included with the kit?\u003c\/strong\u003e No, boat mounting hardware is not included with the Lenco 15046-101 trim tab kit and must be sourced separately for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need anything else besides this kit to complete installation?\u003c\/strong\u003e Yes. Along with mounting hardware, the actuator extension wiring harness is not included with the 15046-101 kit and is needed to run the leads to the helm switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of this trim tab kit?\u003c\/strong\u003e The Lenco Extreme Duty Performance 19 in x 14 in trim tab kit, part 15046-101, weighs 65.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this kit different from Lenco's standard trim tab kits?\u003c\/strong\u003e The 15046-101 kit is part of Lenco's XD, or Extreme Duty, series, which uses thicker blades and heavier actuators designed for larger, faster boats operating in rough water compared to Lenco's lighter-duty trim tab lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this trim tab system run on?\u003c\/strong\u003e The Lenco 15046-101 Extreme Duty Performance trim tab kit operates on 12V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the actuator leads connected?\u003c\/strong\u003e Each of the four actuators in the 15046-101 kit has a 6 foot lead that terminates in a Deutsch connector for the electrical connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there any OEM cross-reference numbers for this trim tab kit?\u003c\/strong\u003e No OEM cross-reference or replacement part numbers are listed for the Lenco 15046-101 trim tab kit; it is identified by its own manufacturer part number.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994910939,"sku":"LEN-15046-101","price":2687.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-Extreme-Duty-Performance-19-inch-by-14-inch-Trim-Tab-Kit__11981.1739460060.500.750.jpg?v=1785164594"},{"product_id":"lenco-extreme-duty-performance-24-x-14-electric-trim-tab-kit-304-stainless-steel-model-15047-101-fits-boats-24-52-ft","title":"Lenco Extreme Duty Performance 24 x 14 Electric Trim Tab Kit, 304 Stainless Steel, Model 15047-101, Fits Boats 24-52 ft","description":"\u003cp\u003eThe Lenco 15047-101 Extreme Duty Performance Trim Tab Kit is a 24 inch x 14 inch electric trim tab system built for larger, faster boats that operate in rough water. It belongs to Lenco's XD series, engineered with thicker, stronger blades and heavy-duty actuators for demanding performance conditions. This kit is intended for boats between 24 and 52 feet in length.\u003c\/p\u003e\u003cp\u003eThe trim tab blades measure 24 inches deep by 14 inches wide and are made from 12-gauge 304 stainless steel that has been electro-polished for extreme corrosion resistance in fresh and saltwater environments. The kit includes four XD Extreme Duty Actuators, a 6 foot actuator lead with Deutsch connectors for a secure, waterproof electrical connection, and boat mounting hardware for installation.\u003c\/p\u003e\u003cp\u003eThis kit is sold without a trim switch, so a compatible switch must be purchased separately to control the tabs. The actuator extension harness is also not included and should be sourced separately if needed for your installation. With its extreme-duty construction, the 15047-101 kit is suited to boaters who need durable, high-output trim control on larger vessels.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15047-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 874847004695\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Dimensions:\u003c\/strong\u003e 24 inches deep x 14 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material:\u003c\/strong\u003e 12-gauge 304 stainless steel, electro-polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Range:\u003c\/strong\u003e 24 feet to 52 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e 4 XD Extreme Duty Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead:\u003c\/strong\u003e 6 feet, with Deutsch connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Switch:\u003c\/strong\u003e Not included, sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Extension Harness:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 77 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBoats 24 feet to 52 feet in length\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Lenco 15047-101 trim tab kit designed for?\u003c\/strong\u003e The Lenco 15047-101 Extreme Duty Performance Trim Tab Kit is intended for boats between 24 and 52 feet in length that operate in rough water conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15047-101 kit come with a trim switch?\u003c\/strong\u003e No. The Lenco Extreme Duty Performance Trim Tab Kit 15047-101 is sold without a trim switch, which must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab blades made from?\u003c\/strong\u003e The blades on the Lenco 15047-101 kit are made from 12-gauge 304 stainless steel that has been electro-polished for extreme corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Lenco Extreme Duty 24 x 14 trim tab kit?\u003c\/strong\u003e Part number 15047-101 includes trim tab blades, 4 XD Extreme Duty Actuators, a 6 foot actuator lead with Deutsch connectors, and boat mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the actuator extension harness included with this kit?\u003c\/strong\u003e No, the actuator extension harness is not included with the Lenco 15047-101 trim tab kit and would need to be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the blade dimensions of part number 15047-101?\u003c\/strong\u003e The trim tab blades on this Lenco kit measure 24 inches deep by 14 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15047-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco Extreme Duty Performance Trim Tab Kit, part number 15047-101, weighs 77 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Extreme Duty 24 x 14 kit compare to Lenco's High Performance trim tab kits?\u003c\/strong\u003e The 15047-101 Extreme Duty kit uses larger 24 inch by 14 inch blades and fits boats 24 to 52 feet, built for bigger, faster boats in rough water, while Lenco's High Performance kits use smaller blades for boats with limited transom space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs boat mounting hardware included with the 15047-101 kit?\u003c\/strong\u003e Yes, boat mounting hardware is included with the Lenco 15047-101 Extreme Duty Performance Trim Tab Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Lenco Extreme Duty 24 x 14 Trim Tab Kit?\u003c\/strong\u003e The UPC for Lenco part number 15047-101 is 874847004695.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 15047-101 kit be used on boats under 24 feet?\u003c\/strong\u003e This kit is designed for boats between 24 and 52 feet in length, so it is not intended for boats shorter than that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many actuators come with the Lenco 15047-101 kit?\u003c\/strong\u003e The Lenco 15047-101 Extreme Duty Performance Trim Tab Kit includes 4 XD Extreme Duty Actuators.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994943707,"sku":"LEN-15047-101","price":2907.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-Extreme-Duty-Performance-24-inch-by-14-inch-Trim-Tab-Kit__37682.1739477241.500.750.jpg?v=1785164594"},{"product_id":"lenco-15049-101-high-performance-18-x-12-inch-electric-trim-tab-kit-without-switch","title":"Lenco 15049-101 High Performance 18 x 12 Inch Electric Trim Tab Kit without Switch","description":"\u003cp\u003eThe Lenco 15049-101 High Performance 18\" x 12\" Electric Trim Tab Kit is built for boats with multiple engines and limited transom space, where a compact tab footprint is needed without giving up performance. The contoured blades are shaped to help decrease cavitation, delivering a smoother, more controlled ride as the tabs adjust boat trim. Each blade is machined from 12-gauge 304 stainless steel and electro-polished for extreme corrosion resistance in saltwater and freshwater environments. This kit is intended for boats between 16 feet and 40 feet in length, and the trim tabs themselves measure 18 inches deep by 12 inches wide.\u003c\/p\u003e\u003cp\u003eThe kit includes two 18\" x 12\" trim tab blades and two XD Extreme Duty actuators, along with a 6-foot actuator lead and Deutsch connectors for a secure, plug-and-play electrical connection. This is an electric trim tab kit sold without a switch, so a compatible trim switch must be purchased separately to operate the tabs. Boat mounting hardware and the actuator extension harness are also not included and should be sourced separately based on your installation. Together, the stainless steel construction, contoured blade design, and heavy-duty XD actuators make this kit a durable, high-performance trim solution for boats that need effective tab control in a smaller footprint.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15049-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Dimensions:\u003c\/strong\u003e 18 inches deep by 12 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material:\u003c\/strong\u003e 12-gauge 304 stainless steel, electro-polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 16 feet to 40 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately, not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e 2 XD Extreme Duty Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Lead Length:\u003c\/strong\u003e 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Deutsch Connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 44.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004718\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis kit is intended for boats between 16 feet and 40 feet in length, particularly boats with multiple engines and limited transom space.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Lenco 15049-101 trim tab kit designed for?\u003c\/strong\u003e This kit is designed for boats with multiple engines and limited transom space, and it is intended for boats between 16 feet and 40 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades in this kit?\u003c\/strong\u003e The Lenco 15049-101 kit includes trim tab blades measuring 18 inches deep by 12 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a trim switch?\u003c\/strong\u003e No, the Lenco 15049-101 is an electric trim tab kit sold without a switch, so a compatible trim switch must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab blades made from?\u003c\/strong\u003e The blades in the 15049-101 kit are made from 12-gauge 304 stainless steel that has been electro-polished for extreme corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit contains two 18 x 12 inch trim tab blades, two XD Extreme Duty actuators, and a 6-foot actuator lead with Deutsch connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the 15049-101 trim tab kit?\u003c\/strong\u003e No, boat mounting hardware and the actuator extension harness are not included with the Lenco 15049-101 kit and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many actuators come with this kit?\u003c\/strong\u003e The Lenco 15049-101 kit includes two XD Extreme Duty actuators, one for each trim tab blade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose contoured blades on this trim tab kit?\u003c\/strong\u003e The contoured blade design on the Lenco 15049-101 helps decrease cavitation, resulting in a smoother ride as the trim tabs adjust the boat's running angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15049-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco 15049-101 High Performance 18 x 12 Inch Trim Tab Kit weighs 44.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connectors are used for the actuators?\u003c\/strong\u003e The actuator lead on the Lenco 15049-101 kit uses waterproof Deutsch connectors for a secure electrical connection.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994976475,"sku":"LEN-15049-101","price":1891.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-High-Performance-18-inch-by-12-inch-Trim-Tab-Kit__48187.1739477241.500.750.jpg?v=1785164594"},{"product_id":"lenco-15052-101-limited-space-electric-trim-tab-kit-4-x-12-inch-fits-14-25-ft-boats","title":"Lenco 15052-101 Limited Space Electric Trim Tab Kit, 4 x 12 Inch, Fits 14-25 Ft Boats","description":"\u003cp\u003eThe Lenco 15052-101 Limited Space Trim Tab Kit is an electric trim tab system built for transoms where mounting space is tight. Its compact 4 inch by 12 inch blade profile is engineered to fit behind ladders and swim platforms, giving boats with limited transom real estate the same trim control benefits as a standard-size tab setup. The kit is intended for boats between 14 feet and 25 feet in length.\u003c\/p\u003e\u003cp\u003eEach blade is made from 12-gauge 304 stainless steel, with the front of the blade folded over to create a smooth trailing edge that reduces turbulence at speed. The hinges stand 2 inches tall and use a 1\/8 inch diameter stainless steel hinge pin for a durable, corrosion-resistant pivot point. The kit is finished in the standard black finish. Electrically, the system runs on 12 volts DC with a 10 amp current rating and carries an IP54 ingress protection rating for use in wet marine environments. A control switch is not included with this kit and must be added separately to complete the trim system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15052-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Dimensions:\u003c\/strong\u003e 4 inches long x 12 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material:\u003c\/strong\u003e 12-gauge 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinge Height:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinge Pin Diameter:\u003c\/strong\u003e 1\/8 inch, stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 14 feet to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Standard finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 10 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004749\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats between 14 feet and 25 feet in length\u003c\/li\u003e\n\u003cli\u003eRecommended for transoms with limited mounting area, such as those with a swim platform and\/or ladder\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Lenco 15052-101 trim tab kit designed for?\u003c\/strong\u003e The Lenco 15052-101 Limited Space Trim Tab Kit is designed for boats between 14 feet and 25 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15052-101 kit include a control switch?\u003c\/strong\u003e No, a control switch is not included with the Lenco 15052-101 kit; it needs to be purchased and wired in separately to operate the trim tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tab blades made from?\u003c\/strong\u003e The blades in the Lenco 15052-101 kit are made from 12-gauge 304 stainless steel, with the front edge folded over for a smooth trailing edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big are the trim tab blades on this kit?\u003c\/strong\u003e Each blade measures 4 inches long by 12 inches wide, sized specifically for limited transom mounting space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I choose this Limited Space kit over a standard trim tab kit?\u003c\/strong\u003e This kit's compact 4 inch by 12 inch blade and 2 inch hinge height let it fit behind ladders and swim platforms where a standard-size Lenco trim tab kit would not clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the hinge pin on the 15052-101 kit?\u003c\/strong\u003e The hinges use a 1\/8 inch diameter stainless steel hinge pin and stand 2 inches in height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color and finish does this trim tab kit come in?\u003c\/strong\u003e The Lenco 15052-101 kit is supplied in the standard finish and black color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and current does the 15052-101 trim tab system use?\u003c\/strong\u003e This kit operates on 12 volts DC and is rated for 10 amps of current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 15052-101 kit rated for wet or splash environments?\u003c\/strong\u003e Yes, the 15052-101 carries an IP54 ingress protection rating, indicating protection against dust ingress and splashing water, which suits it for marine transom mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15052-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco 15052-101 Limited Space Trim Tab Kit weighs 14.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The Lenco 15052-101 kit includes the 4 inch by 12 inch stainless steel trim tab blades and hinge hardware; a control switch is sold separately and is not part of this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit suitable for boats with a swim platform or ladder?\u003c\/strong\u003e Yes, the compact blade and hinge design of the 15052-101 kit is specifically intended for boats with a swim platform and\/or ladder where transom space is limited.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995009243,"sku":"LEN-15052-101","price":683.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/lenco-15052-101-limited-space-trim-tab-kit-4x12-boat-marine-accessory__22671.1772556047.500.750.jpg?v=1785164599"},{"product_id":"lenco-15068-101-high-performance-trim-tab-kit-29-x-14-inch-boats-30-to-52-feet","title":"Lenco 15068-101 High Performance Trim Tab Kit, 29 x 14 Inch, Boats 30 to 52 Feet","description":"\u003cp\u003eThe Lenco 15068-101 High Performance Trim Tab Kit is a 29 inch by 14 inch electric trim tab set built for high performance and extreme duty applications on boats from 30 to 52 feet in length. The radiused blade design gives maximum clearance for multiple outboard applications and reduces cavitation to the prop, helping the boat get on plane faster, level out running attitude, and improve fuel efficiency and ride comfort at speed.\u003c\/p\u003e\u003cp\u003eEach kit arrives factory assembled with a full transom back plate, a mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75 inch sacrificial anodes for corrosion protection at the transom. The adjustable C-channel brackets allow the blades to be positioned to suit the boat's transom configuration during installation. This kit does not include a switch; it requires switch 15071-001, which can be purchased separately or used from an existing compatible setup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15068-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Size:\u003c\/strong\u003e 29 inches x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Design:\u003c\/strong\u003e Radiused blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 30 feet to 52 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Switch:\u003c\/strong\u003e 15071-001 (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Brackets:\u003c\/strong\u003e Adjustable C-channel mounting brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Plate:\u003c\/strong\u003e Full transom back plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Seal:\u003c\/strong\u003e Mechanical strain relief cable seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodes:\u003c\/strong\u003e 3.75 inch sacrificial anodes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 80.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis trim tab kit is recommended for boats from 30 to 52 feet in length. Review your boat's transom configuration and outboard setup to confirm compatibility before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 15068-101 trim tab kit designed for?\u003c\/strong\u003e The Lenco 15068-101 High Performance Trim Tab Kit is designed for high performance and extreme duty applications on boats from 30 to 52 feet in length, with a radiused blade design especially useful for multiple outboard applications where maximum clearance is important.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades in this kit?\u003c\/strong\u003e The blades in the Lenco 15068-101 kit measure 29 inches by 14 inches and use a radiused design for maximum clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 29 x 14 inch trim tab kit include a switch?\u003c\/strong\u003e No, switch 15071-001 is required and is not included in the Lenco 15068-101 kit; it must be purchased separately or used from an existing compatible setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Lenco High Performance Trim Tab Kit?\u003c\/strong\u003e The 15068-101 kit is factory assembled with a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75 inch sacrificial anodes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat lengths is this trim tab kit recommended for?\u003c\/strong\u003e This trim tab kit is recommended for boats from 30 to 52 feet in length; review your boat's transom configuration before ordering to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15068-101 trim tab kit weigh?\u003c\/strong\u003e The Lenco 15068-101 High Performance Trim Tab Kit weighs 80.3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the radiused blades on this trim tab kit do?\u003c\/strong\u003e The radiused blades on the 15068-101 kit provide maximum clearance for multiple outboard applications and help reduce cavitation to the prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15068-101 kit include the anodes needed at the transom?\u003c\/strong\u003e Yes, the kit ships with 3.75 inch sacrificial anodes for the transom mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit factory assembled or does it require building from parts?\u003c\/strong\u003e The Lenco 15068-101 kit arrives factory assembled with the back plate, cable seal, mounting brackets, and anodes already fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of mounting brackets come with this trim tab kit?\u003c\/strong\u003e The 15068-101 kit includes adjustable C-channel mounting brackets that allow the blades to be positioned to suit the transom.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995467995,"sku":"LEN-15068-101","price":3176.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/len-15068-101_lg__74519.1558140906.500.750.jpg?v=1785164604"},{"product_id":"stingray-hydrofoils-xr4-sr-xr4-1-hydrofoil-boat-stabilizer-40-300-hp-black","title":"Stingray Hydrofoils XR4 SR-XR4-1 Hydrofoil Boat Stabilizer, 40-300 HP, Black","description":"\u003cp\u003eThe Stingray Hydrofoils XR4 (SR-XR4-1) is a hydrofoil boat stabilizer engineered to improve lift and holeshot on outboard and outdrive engines from 40 to 300 HP. Mounted directly to the cavitation plate, the XR4 helps boats get on plane quicker and stay on plane at lower speeds, which reduces engine strain and improves fuel economy. Its design reduces or eliminates chinewalking, porpoising, cavitation, and ventilation, giving the boat a more stable, comfortable ride while also increasing driver visibility at lower speeds by getting the bow down sooner.\u003c\/p\u003e\u003cp\u003eThe XR4 is built with downturned wings that pack water tightly around the propeller, making it a strong fit for boats that struggle with cavitation, including pontoon and tritoon boats. Boats pulling tubers, skiers, or wakeboarders benefit from a quicker pull-up and a smoother wake, while heavy runabouts and center console boats gain the maximum lift the XR4 is designed to deliver. The unit is finished in black and features a next-generation graphics package styled to complement modern outboard engines.\u003c\/p\u003e\u003cp\u003eInstallation uses a 2-bolt, 2-drill method: the hydrofoil slides onto the cavitation plate, two holes are drilled through the existing guide holes, and the included stainless bolts, washers, and nylon lock nuts secure it in place. Stingray backs the XR4 with a 1 year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Stingray Hydrofoils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SR-XR4-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHP Range:\u003c\/strong\u003e 40-300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Level:\u003c\/strong\u003e 3-Maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e 2-Drill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Transom Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 24 inches (Depth) x 5 inches (Width) x 22.25 inches (Height)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e Water Sports (Skiing, Wakeboarding, Tubing), Fishing, Cruising, Heavy Runabouts, Ocean-going Center-consoles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat HP range is the Stingray XR4 hydrofoil designed for?\u003c\/strong\u003e The Stingray XR4 (SR-XR4-1) is designed for outboard and outdrive engines in the 40-300 HP range, covering everything from heavy runabouts to ocean-going center consoles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the XR4 hydrofoil installed?\u003c\/strong\u003e Installation uses a 2-bolt, 2-drill method: the SR-XR4-1 slides onto the cavitation plate with the graphics facing up, two holes are drilled using the existing guide holes, and the included stainless bolts, washers, and nylon lock nuts secure it from underneath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the XR4 hydrofoil?\u003c\/strong\u003e The Stingray XR4 (SR-XR4-1) ships with the pre-assembled hydrofoil unit along with two stainless bolts, two stainless washers, and two nylon hex nuts, which is all the hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Stingray XR4 hydrofoil?\u003c\/strong\u003e The SR-XR4-1 is finished in black with a next-generation graphics package designed to match the styling of modern outboard engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Stingray XR4 hydrofoil made from?\u003c\/strong\u003e The Stingray XR4 (SR-XR4-1) is constructed from metal for a durable, heavy-duty hydrofoil that holds up to sustained use on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the XR4 hydrofoil help with cavitation on a pontoon boat?\u003c\/strong\u003e Yes, the downturned wings on the SR-XR4-1 pack water tightly around the propeller, which makes it a strong fit for pontoon and tritoon boats that commonly experience cavitation issues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Stingray XR4 improve fuel economy?\u003c\/strong\u003e By getting boats on plane quicker and keeping them on plane at lower speeds, the SR-XR4-1 reduces engine strain, which leads to significant fuel savings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the XR4 differ from the Stingray Junior hydrofoil?\u003c\/strong\u003e The XR4 (SR-XR4-1) is built for 40-300 HP engines using a 2-drill installation, while the Stingray Junior is sized for smaller 9.9-40 HP engines on inflatables, tenders, and jon boats and can be trimmed narrower to fit smaller cavitation plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the XR4 compare to the Stingray Starfire and Stinger models?\u003c\/strong\u003e The SR-XR4-1 uses a 2-drill installation for 40-300 HP engines, the Stingray Starfire offers a no-drill or optional-drill installation across the same 40-300 HP range, and the Stingray Stinger covers a wider 4-300 HP range with drill installation required under 40 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the XR4 hydrofoil reduce chinewalking and porpoising?\u003c\/strong\u003e Yes, reducing or eliminating chinewalking, porpoising, cavitation, and ventilation is a core function of the Stingray XR4 (SR-XR4-1) design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Stingray XR4 hydrofoil a genuine Stingray product?\u003c\/strong\u003e The SR-XR4-1 is the genuine Stingray Hydrofoils XR4, identified by its manufacturer part number and backed by a 1 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Stingray XR4 hydrofoil?\u003c\/strong\u003e The Stingray XR4 (SR-XR4-1) measures 24 inches in depth, 5 inches in width, and 22.25 inches in height.\u003c\/p\u003e","brand":"Stingray Hydrofoils","offers":[{"title":"Default Title","offer_id":49028222714075,"sku":"M-D-SR-XR4-1","price":186.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/XR4__88970.1722500888.500.750.jpg?v=1785165570"},{"product_id":"stingray-starfire-hydrofoil-no-drill-boat-stabilizer-fin-40-300-hp-black","title":"Stingray Starfire Hydrofoil - No-Drill Boat Stabilizer Fin, 40-300 HP, Black","description":"\u003cp\u003eThe Stingray Starfire Hydrofoil is a bolt-on stabilizer fin that attaches to the cavitation plate of an outboard or outdrive engine to improve how a boat rides on plane. It works by extending the wing tips of the fin for added stabilization, while an inverted trailing edge is engineered to reduce drag and maximize top-end speed. The Starfire is built for a fast, simple installation, using StingRay's original No-Drill mounting method (an optional 2-drill installation can also be used), so boat owners can get the fin on and start seeing results without modifying the cavitation plate.\u003c\/p\u003e\u003cp\u003eOn the water, the Starfire helps get the boat on plane quicker, improves holeshot, and keeps the boat stable and on plane at lower speeds. By packing water tightly around the propeller and stabilizing the running angle of the boat, it reduces chinewalking, porpoising, cavitation, and ventilation for a smoother, more controlled ride. Getting the bow down sooner also increases driver visibility at low speed, which adds a real safety benefit, and the more efficient running angle translates into fuel savings over time. The Starfire is built from aluminum and finished in black, and it is rated for engines from 40 HP up to 300 HP.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Stingray Hydrofoils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e STARFIRE-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydrofoil \/ Boat Stabilizer Fin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Range:\u003c\/strong\u003e 40 to 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e No-Drill (optional drill installation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 20 inches D x 20 inches W x 1 inch H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 656166695569\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOutboard and outdrive engines from 40 HP to 300 HP\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Stingray Starfire Hydrofoil fit?\u003c\/strong\u003e The Starfire Hydrofoil (STARFIRE-1) is rated for outboard and outdrive engines from 40 HP up to 300 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing the Starfire Hydrofoil require drilling into the cavitation plate?\u003c\/strong\u003e No drilling is required for the standard installation of the Stingray Starfire Hydrofoil, which uses StingRay's original No-Drill mounting method; an optional 2-drill installation is also available if preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Starfire Hydrofoil?\u003c\/strong\u003e The Starfire Hydrofoil is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Starfire Hydrofoil made of?\u003c\/strong\u003e The Stingray Starfire Hydrofoil is constructed from aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Starfire Hydrofoil weigh?\u003c\/strong\u003e The Stingray Starfire Hydrofoil weighs 2.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Starfire Hydrofoil?\u003c\/strong\u003e The Starfire Hydrofoil measures 20 inches deep by 20 inches wide by 1 inch high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Starfire Hydrofoil help with chinewalking or porpoising?\u003c\/strong\u003e Yes, the Stingray Starfire Hydrofoil is designed to reduce chinewalking, porpoising, cavitation, and ventilation by stabilizing the boat's running angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Starfire Hydrofoil affect fuel economy?\u003c\/strong\u003e By helping the boat get on plane quicker and stay stable at lower speeds, the Starfire Hydrofoil promotes more efficient running and fuel savings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Starfire Hydrofoil improve holeshot?\u003c\/strong\u003e Yes, the Stingray Starfire Hydrofoil is engineered to improve holeshot and get boats on plane quicker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Starfire Hydrofoil different from other Stingray hydrofoils?\u003c\/strong\u003e The Starfire Hydrofoil is distinguished by its No-Drill installation and an inverted trailing edge designed to reduce drag and maximize top-end speed, while its extended wing tips add stabilization.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Starfire Hydrofoil?\u003c\/strong\u003e The Stingray Starfire Hydrofoil (STARFIRE-1) ships as the main hydrofoil component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Starfire Hydrofoil improve visibility while driving?\u003c\/strong\u003e Yes, by getting the bow of the boat down sooner at lower speeds, the Starfire Hydrofoil increases driver visibility and promotes safety.\u003c\/p\u003e","brand":"Stingray Hydrofoils","offers":[{"title":"Default Title","offer_id":49028222845147,"sku":"M-D-STARFIRE-1","price":118.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/M-D-STARFIRE-1__47968.1558348333.500.750.jpg?v=1785165570"},{"product_id":"stingray-junior-hydrofoil-boat-stabilizer-for-9-9-40-hp-outboard-and-outdrive-engines-black","title":"Stingray Junior Hydrofoil Boat Stabilizer for 9.9-40 HP Outboard and Outdrive Engines, Black","description":"\u003cp\u003eThe Stingray Junior Hydrofoil Boat Stabilizer (JR2-1) is a cavitation-plate-mounted hydrofoil built for smaller boats and engines, fitting outboard and outdrive motors from 9.9 to 40 HP. It is designed for inflatables, smaller tenders, and jon boats that run engines too small for Stingray's larger hydrofoil models. The high-tech wing shape directs water flow over its surface to generate the right amount of lift for a small engine, helping the boat get on plane quicker and stay on plane at lower speeds.\u003c\/p\u003e\u003cp\u003eBeyond lift, the wings on the Stingray Junior also stabilize the boat side-to-side, cutting down on rocking. This reduces chinewalking, porpoising, cavitation, and ventilation, which in turn improves fuel economy, control, and overall ride quality. It also increases visibility at low speeds, which adds a margin of safety.\u003c\/p\u003e\u003cp\u003eThe Stingray Junior comes pre-assembled as a single black unit and includes all mounting hardware: four bolts, four self-locking nuts, and four rubber washers. Installation requires drilling four holes through the cavitation plate, using the pre-drilled holes in the hydrofoil as a guide. For boats with narrower cavitation plates, the hydrofoil can be separated into two pieces at a rear screw and shortened in 1\/4 inch increments on each side to achieve a proper fit; both sides must be cut the same number of times.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Stingray Hydrofoils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JR2-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHP Range:\u003c\/strong\u003e 9.9 to 40 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Level:\u003c\/strong\u003e Average\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene (PP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 18 inches long x 16 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e 4-Hole Drill Installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e 4 bolts, 4 self-locking nuts, 4 rubber washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Width:\u003c\/strong\u003e Yes, in 1\/4 inch increments per side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 096144006206\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engine sizes does the Stingray Junior Hydrofoil fit?\u003c\/strong\u003e The Stingray Junior Hydrofoil (JR2-1) is designed for outboard and outdrive engines from 9.9 to 40 HP, making it suited to inflatables, smaller tenders, and jon boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JR2-1 hydrofoil black or another color?\u003c\/strong\u003e This Stingray Junior Hydrofoil is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Stingray Junior Hydrofoil installed?\u003c\/strong\u003e Installation requires drilling four 1\/4 inch holes through the cavitation plate, using the pre-drilled holes in the JR2-1 hydrofoil as a guide, then bolting it on with the included four bolts, four self-locking nuts, and four rubber washers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Stingray Junior Hydrofoil come with mounting hardware?\u003c\/strong\u003e Yes, the JR2-1 includes four bolts, four self-locking nuts, and four rubber washers, so no separate hardware purchase is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the hydrofoil be resized for a smaller cavitation plate?\u003c\/strong\u003e The Stingray Junior can be separated into two pieces at a rear screw and shortened in 1\/4 inch increments to better fit smaller cavitation plate widths; both pieces should be cut the same number of times for a proper fit. Not every installation needs this step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Stingray Junior Hydrofoil?\u003c\/strong\u003e The JR2-1 hydrofoil measures 18 inches long by 16 inches wide and weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Stingray Junior Hydrofoil made from?\u003c\/strong\u003e It is made from polypropylene (PP).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problems does the Stingray Junior Hydrofoil address?\u003c\/strong\u003e It reduces chinewalking, porpoising, cavitation, and ventilation, while helping a boat get on plane quicker and stay on plane at lower speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hydrofoil improve fuel economy?\u003c\/strong\u003e Yes, by helping the boat reach and hold plane more efficiently at lower speeds, the Stingray Junior Hydrofoil improves fuel economy along with stability and control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the JR2-1 come pre-assembled?\u003c\/strong\u003e The Stingray Junior Hydrofoil comes pre-assembled as one unit and can be adjusted to fit a smaller engine size by cutting it down at its center screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Stingray Junior compare to Stingray's larger hydrofoil models?\u003c\/strong\u003e The Stingray Junior (JR2-1) is built for smaller 9.9-40 HP engines with a 4-hole drill installation, unlike Stingray's XR4 model which covers 40-300 HP engines with a 2-bolt installation, or the no-drill Hyperfoil 500 and Starfire models built for 4-300 HP and 40-300 HP engines respectively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do if the hydrofoil interferes with the propeller?\u003c\/strong\u003e Before operating the boat with the Stingray Junior Hydrofoil installed, slowly turn the propeller by hand to confirm there is no interference between the hydrofoil and the propeller.\u003c\/p\u003e","brand":"Stingray Hydrofoils","offers":[{"title":"Default Title","offer_id":49028222746843,"sku":"M-D-JR-1","price":50.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Classic-Jr__80029.1724344021.500.750.jpg?v=1785165570"},{"product_id":"stingray-hydrofoils-hyperfoil-500-no-drill-boat-hydrofoil-stabilizer-4-300-hp-red","title":"Stingray Hydrofoils Hyperfoil 500 No-Drill Boat Hydrofoil Stabilizer, 4-300 HP, Red","description":"\u003cp\u003eThe Stingray Hydrofoils Hyperfoil 500 is a bolt-free hydrofoil stabilizer built to deliver vertical lift and unrestrained top-end speed for outboard and outdrive-powered boats. Its patented no-drill technology means installation requires zero holes in the cavitation plate for most engines, letting boaters add a performance stabilizer without modifying the lower unit. The Hyperfoil 500 is molded from a proprietary HyperSpeed Red material that reduces drag while also increasing the visibility of the engine's lower unit, both while running in the water and while trailering. A chrome badge is set into the wing for a finished, upscale look that suits the professional bass boater as well as everyday recreational use.\u003c\/p\u003e\u003cp\u003eFunctionally, the Hyperfoil 500 works by directing water flow over its wing surfaces to reduce porpoising, cavitation, ventilation, and chine walking, which stabilizes the boat's ride and improves control. Boaters can expect stronger hole shots, more consistent on-plane performance, and fuel savings from reduced engine strain. The Hyperfoil 500 fits engines from 4 HP up to 300 HP, with drill installation needed only on engines under 40 HP; engines above that threshold use the no-drill mounting method. This makes it a versatile stabilizer choice across a wide span of outboard and outdrive sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Stingray Hydrofoils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e HYPERFOIL-500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine HP Fit:\u003c\/strong\u003e 4 to 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e No-drill above 40 HP; drill installation required under 40 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Proprietary HyperSpeed Red material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 17.25 x 15.5 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 096144016014\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits outboard and outdrive engines from 4 HP to 300 HP. Engines under 40 HP require drill installation; engines above 40 HP use the no-drill mounting method.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engine sizes does the Stingray Hyperfoil 500 fit?\u003c\/strong\u003e The Hyperfoil 500 fits outboard and outdrive engines ranging from 4 HP to 300 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Hyperfoil 500 require drilling into the cavitation plate?\u003c\/strong\u003e Only on engines under 40 HP. On engines above 40 HP, the Hyperfoil 500 uses patented no-drill technology that requires zero holes for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Stingray Hyperfoil 500?\u003c\/strong\u003e It is molded in a proprietary HyperSpeed Red material, which also helps reduce drag and increase visibility of the lower unit in the water and during transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Hyperfoil 500 weigh?\u003c\/strong\u003e The Stingray Hyperfoil 500 weighs 2.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Hyperfoil 500?\u003c\/strong\u003e The Hyperfoil 500 measures 17.25 x 15.5 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problems does the Hyperfoil 500 solve on the water?\u003c\/strong\u003e It reduces and helps eliminate porpoising, cavitation, ventilation, and chine walking, resulting in a more stable, controlled ride.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Hyperfoil 500 improve hole shot and top-end speed?\u003c\/strong\u003e Yes, the Hyperfoil 500 is designed to maximize vertical lift, unleash top-end speed potential, and deliver stronger hole shots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Hyperfoil 500 intended for tournament bass boats?\u003c\/strong\u003e The Stingray Hyperfoil 500 is designed with a luxurious chrome badge and is built for the professional bass boater, while also suiting general recreational outboard and outdrive setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Hyperfoil 500 help save fuel?\u003c\/strong\u003e Yes, by reducing drag and stabilizing the boat on plane, the Hyperfoil 500 helps save fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Hyperfoil 500 different from Stingray's other hydrofoils?\u003c\/strong\u003e Unlike Stingray's drill-installed models, the Hyperfoil 500 (part number HYPERFOIL-500) uses no-drill mounting above 40 HP and adds a chrome badge and HyperSpeed Red material aimed at maximizing top-end speed for bass boat use.\u003c\/p\u003e","brand":"Stingray Hydrofoils","offers":[{"title":"Default Title","offer_id":49028222812379,"sku":"M-D-HYPERFOIL-500","price":82.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/M-D-HYPERFOIL-500__97638.1722504335.500.750.jpg?v=1785165570"},{"product_id":"stingray-airo-hydrofoil-2-piece-boat-stabilizer-4-350-hp-black","title":"Stingray AIRO Hydrofoil 2-Piece Boat Stabilizer, 4-350 HP, Black","description":"\u003cp\u003eThe Stingray AIRO Hydrofoil is a 2-piece hydrofoil stabilizer built to fit an unusually wide span of outboard sizes, from engines as small as 4 HP up through 350 HP. That range makes it a fit for inflatables, small tenders, and jon boats running compact outboards, while still delivering real benefit on larger engines. Once installed, the AIRO gets the boat on plane faster, keeps it planing at lower speeds, and improves holeshot acceleration. The downturned wing design packs water around the propeller, which reduces chinewalking, porpoising, cavitation, and ventilation while boosting stabilization and driver visibility at low speed.\u003c\/p\u003e\u003cp\u003eThe AIRO ships as two separate wings rather than a single molded unit. The right wing carries the Stingray AIRO logo on its top surface, while the left wing is blank on top, so the two are easy to tell apart during installation. Mounting is a 4-drill installation on the cavitation plate, and the hydrofoil is rated Lift Level 1 (Average) for balanced, all-purpose lift rather than an aggressive high-lift setup. Installation calls for an electric drill and a Phillips head screwdriver. Finished in black, the AIRO is an economical way to add hydrofoil performance and safety benefits to a boat without paying for features built around a single, narrow HP window.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Stingray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AIRO-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHP Range:\u003c\/strong\u003e 4 - 350 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e 4-Drill installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Level:\u003c\/strong\u003e 1 (Average)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 2-Piece (left and right hydrofoil wings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.89 x 7.2 x 1.85 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 096144016052\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engine sizes does the Stingray AIRO Hydrofoil fit?\u003c\/strong\u003e The Stingray AIRO Hydrofoil (AIRO-1) fits engines from as small as 4 HP up to 350 HP, which covers everything from inflatable and jon boat outboards to larger engines on runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AIRO Hydrofoil one piece or two?\u003c\/strong\u003e It is a 2-piece hydrofoil, with a separate left and right wing rather than a single molded unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I tell the left wing from the right wing during installation?\u003c\/strong\u003e The right hydrofoil wing has the Stingray AIRO logo on its top surface, while the left wing is blank on top, so the two pieces are easy to distinguish before mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Stingray AIRO Hydrofoil installed?\u003c\/strong\u003e Installation is a 4-drill mounting to the cavitation plate, and you will need an electric drill and a Phillips head screwdriver to complete the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lift level does the AIRO-1 provide?\u003c\/strong\u003e The AIRO-1 is rated Lift Level 1 (Average), giving balanced, all-purpose lift rather than a maximum-lift, high-performance setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the AIRO Hydrofoil come in?\u003c\/strong\u003e The Stingray AIRO Hydrofoil is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the AIRO Hydrofoil help with porpoising or chinewalking?\u003c\/strong\u003e Yes, the AIRO-1 is designed to reduce chinewalking, porpoising, cavitation, and ventilation while stabilizing the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Stingray AIRO Hydrofoil weigh?\u003c\/strong\u003e The Stingray AIRO Hydrofoil (AIRO-1) weighs 1.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the AIRO-1 hydrofoil?\u003c\/strong\u003e The AIRO-1 measures 11.89 x 7.2 x 1.85 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the AIRO Hydrofoil different from the Stingray XR4?\u003c\/strong\u003e The AIRO-1 covers a much wider HP range (4-350 HP) with a 4-drill installation and Average lift, while the Stingray XR4 targets 40-300 HP engines, uses a simpler 2-drill installation, and provides Level 3 (Maximum) lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AIRO Hydrofoil suitable for small inflatable boats?\u003c\/strong\u003e Yes, the Stingray AIRO Hydrofoil's 4 HP minimum rating makes it suitable for inflatables, smaller tenders, and jon boats running small outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools do I need to install the AIRO-1 hydrofoil?\u003c\/strong\u003e You need an electric drill and a Phillips head screwdriver to install the Stingray AIRO Hydrofoil's 4-drill mounting.\u003c\/p\u003e","brand":"Stingray Hydrofoils","offers":[{"title":"Default Title","offer_id":49028222779611,"sku":"M-D-AIRO-1","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AIRO__63386.1722508799.500.750.jpg?v=1785165570"},{"product_id":"stingray-stinger-hydrofoil-stinger-1-black-stabilizer-fin-for-4-300-hp-outboard-outdrive-engines","title":"Stingray Stinger Hydrofoil STINGER-1 - Black Stabilizer Fin for 4-300 HP Outboard\/Outdrive Engines","description":"\u003cp\u003eThe Stingray Stinger Hydrofoil (STINGER-1) is a bolt-on stabilizer fin engineered to mount to the anti-cavitation plate of outboard and outdrive (I\/O) motors. It is built to work across a wide 4 to 300 horsepower range, giving smaller boats and engine setups a significant lift while helping larger boats and engine setups achieve improved holeshots and maximum top-end speed.\u003c\/p\u003e\u003cp\u003eThe delta-wing design reduces chinewalking, porpoising, cavitation, and ventilation, which helps the boat get on plane quicker, saves fuel, and reduces strain on the engine. By increasing visibility at lower speeds and keeping the boat stable and on plane at reduced speeds, the Stinger Hydrofoil promotes safer handling in a range of conditions.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: boats under 40 hp use a simple 2-drill mounting method, while boats above 40 hp can use an easy no-drill installation. All mounting hardware and instructions are included. The hydrofoil is finished in black and is made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Stingray Hydrofoils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e STINGER-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Delta-Wing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\/HP Fit:\u003c\/strong\u003e 4-300 hp outboard\/outdrive engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e 2-drill installation for engines under 40 hp; no-drill installation for engines 40 hp and above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 17.25 x 15.5 x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Stabilizer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e One Year Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 096144001416\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutboard and outdrive engines from 4 hp to 300 hp\u003c\/li\u003e\n\u003cli\u003eEngines under 40 hp require drilled mounting; engines 40 hp and above can use no-drill mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat engines does the Stingray Stinger Hydrofoil fit?\u003c\/strong\u003e The Stingray Stinger Hydrofoil (STINGER-1) fits outboard and outdrive engines ranging from 4 hp to 300 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Stinger Hydrofoil require drilling to install?\u003c\/strong\u003e It depends on engine size: engines under 40 hp require a simple 2-drill installation, while engines 40 hp and above can use an easy no-drill installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Stinger Hydrofoil do for a boat's performance?\u003c\/strong\u003e It provides lift to stabilize the boat on plane, reduces chinewalking, porpoising, cavitation, and ventilation, improves holeshots, saves fuel, and increases visibility at lower speeds for the STINGER-1 hydrofoil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the STINGER-1 hydrofoil?\u003c\/strong\u003e The Stingray Stinger Hydrofoil is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Stinger Hydrofoil weigh?\u003c\/strong\u003e The STINGER-1 hydrofoil weighs 2.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Stinger Hydrofoil?\u003c\/strong\u003e The Stingray Stinger Hydrofoil measures 17.25 x 15.5 x 2 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with the Stinger Hydrofoil?\u003c\/strong\u003e Yes, the STINGER-1 hydrofoil ships as a complete stabilizer with the hardware and instructions needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Stingray Stinger Hydrofoil made?\u003c\/strong\u003e The STINGER-1 hydrofoil is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Stinger Hydrofoil?\u003c\/strong\u003e The Stingray Stinger Hydrofoil is backed by a one year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Stinger Hydrofoil different from the Stingray Starfire Hydrofoil?\u003c\/strong\u003e The Stinger (STINGER-1) covers a broader 4-300 hp application range and uses drilled installation for engines under 40 hp, while the Starfire is fit for 40-300 hp engines with no-drill or optional-drill installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Stinger Hydrofoil help with chinewalking?\u003c\/strong\u003e Yes, the STINGER-1 hydrofoil is designed to reduce chinewalking along with porpoising, cavitation, and ventilation.\u003c\/p\u003e","brand":"Stingray Hydrofoils","offers":[{"title":"Default Title","offer_id":49028223041755,"sku":"M-D-STINGER-1","price":58.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/M-D-STINGER-1__85728.1558348396.500.750.jpg?v=1785165570"},{"product_id":"nauticus-st980-30-smart-tabs-9-x-8-self-leveling-trim-tab-kit-30-50-hp-boats","title":"Nauticus ST980-30 Smart Tabs 9 x 8 Self-Leveling Trim Tab Kit, 30-50 HP Boats","description":"\u003cp\u003eThe Nauticus ST980-30 Smart Tabs is an automatic trim tab system built for small power boats running 30 to 50 horsepower two or four stroke engines, and is ideal for vessels from 10 feet to 22 feet in length. Unlike manual trim tab systems that rely on electric or hydraulic actuators and switches, Smart Tabs is a self-adjusting, speed-regulated system: the tabs respond automatically to changing speed and sea conditions to reduce bow rise and porpoising, helping the boat get on plane faster and ride more level with less driver input.\u003c\/p\u003e\u003cp\u003eThe trim tab planes measure 9 inches wide by 8 inches deep and are built from marine-grade stainless steel components for durability in the marine environment. The self-contained nitrogen gas actuators are sealed in chemical- and ultraviolet-resistant EPDM rubber boot seals for extended service life, and the plates include five actuator mounting positions so the system can be tuned to the specific boat. The adjustable trim plate bracket allows installation on many contoured transoms, and the kit installs on most aluminum, wood, or fiberglass transoms in under an hour. The ST980-30 kit is made in the USA and includes a complete owner's and installation manual.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Nauticus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ST980-30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Self-Leveling Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Width:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Depth:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Horsepower Range:\u003c\/strong\u003e 30 to 50 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Type:\u003c\/strong\u003e 2 or 4 stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 10 feet to 22 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Mounting Positions:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel with EPDM rubber boot seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.38 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmall tenders and RIBs, 10, 11, or 12 foot boats with 20 to 25 HP, 2 or 4 stroke motors\u003c\/li\u003e\n\u003cli\u003eRIBs, flats and bay, bow riders, fish and ski boats, 13, 14, or 15 foot boats with 30 to 40 HP, 2 stroke motors\u003c\/li\u003e\n\u003cli\u003eGeneral use on vessels from 10 feet to 22 feet with 30 to 50 HP, 2 or 4 stroke engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eST98030\u003c\/li\u003e\n\u003cli\u003eSMAST98030\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Nauticus ST980-30 Smart Tabs kit designed for?\u003c\/strong\u003e The ST980-30 is designed for vessels from 10 feet to 22 feet in length running 30 to 50 horsepower two or four stroke engines, with the tightest fit for boats 13 to 15 feet running 30 to 40 HP two stroke motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the ST980-30 Smart Tabs automatic or do they need manual adjustment?\u003c\/strong\u003e Yes, the ST980-30 Smart Tabs are a self-adjusting, speed-regulated system that automatically responds to speed and sea conditions, so there are no electric or hydraulic switches to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the ST980-30 trim tab planes?\u003c\/strong\u003e The Nauticus ST980-30 trim tab planes measure 9 inches wide by 8 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Nauticus ST980-30 Smart Tabs kit weigh?\u003c\/strong\u003e The ST980-30 kit weighs 4.38 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Smart Tabs ST980-30 made from?\u003c\/strong\u003e The ST980-30 kit uses marine-grade stainless steel components, with the nitrogen gas actuators sealed in chemical- and ultraviolet-resistant EPDM rubber boot seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to install the ST980-30 trim tab kit?\u003c\/strong\u003e Installation typically takes less than an hour, and the ST980-30 can be mounted on most aluminum, wood, or fiberglass transoms, including many contoured transoms thanks to the adjustable trim plate bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ST98030 the same part as the ST980-30?\u003c\/strong\u003e Yes, ST98030 is the same Nauticus Smart Tabs trim tab kit listed under the part number ST980-30, sometimes also referenced as SMAST98030.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Nauticus ST980-30 Smart Tabs kit?\u003c\/strong\u003e The kit includes the stainless steel trim tab components, self-contained nitrogen gas actuators with rubber boot seals, and a complete owner's and installation manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ST980-30 Smart Tabs be tuned for different boats?\u003c\/strong\u003e Yes, the ST980-30 plates include five actuator mounting positions, allowing the system to be customized and fine-tuned for the specific boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Nauticus ST980-30 Smart Tabs kit manufactured?\u003c\/strong\u003e The ST980-30 Smart Tabs kit is made in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Nauticus ST980-30 Smart Tabs?\u003c\/strong\u003e Nauticus warrants the ST980-30 against defects in material and workmanship for five years on all metal components, and two years on the rubber boot covers and gas actuators, from the date of purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is the ST980-30 recommended for?\u003c\/strong\u003e The ST980-30 is recommended for small tenders and RIBs, as well as RIBs, flats and bay boats, bow riders, fish boats, and ski boats, depending on boat length and horsepower.\u003c\/p\u003e","brand":"Nauticus","offers":[{"title":"Default Title","offer_id":49028241064155,"sku":"NAU-ST980-30","price":137.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Nauticus-ST980-30-30lb-Smart-Tabs-9-inch-by-8-inch-Trim-Tab-Kit__54377.1739477221.500.750.jpg?v=1785165274"},{"product_id":"nauticus-st780-20-smart-tab-7-x-8-self-leveling-trim-tab-kit-for-boats-12-16-ft-40-80-hp","title":"Nauticus ST780-20 Smart Tab 7 x 8 Self-Leveling Trim Tab Kit for Boats 12-16 ft, 40-80 HP","description":"\u003cp\u003eThe Nauticus ST780-20 Smart Tab is a self-leveling trim tab kit built for boats 12 to 16 feet in length running 2 or 4 stroke engines rated from 40 HP up to 80 HP. It is recommended for use on Bay, Bow Rider, Fish, Flats, RIBs, and Ski boats. Unlike manually adjusted trim tabs, the Smart Tab system uses self-contained nitrogen gas actuators to automatically level the boat as speed and load conditions change, helping the hull get on plane with less bow rise and a more level ride.\u003c\/p\u003e\u003cp\u003eEach tab plane measures 7 inches wide by 8 inches deep. The kit's structural components are stainless steel, and the actuators are protected by rubber boot seals for extended service life. The complete kit contains everything needed for installation: the stainless steel tab hardware, the nitrogen gas actuators with rubber boot seals, and a full owner's\/installation manual. Nauticus backs the ST780-20 with a manufacturer's warranty covering metal components for five years and rubber boot covers and gas actuators for two years from the date of purchase.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Nauticus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ST780-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Self-Leveling Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Plane Dimensions:\u003c\/strong\u003e 7 inches wide by 8 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 12 feet to 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Size:\u003c\/strong\u003e 40 HP to 80 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Type:\u003c\/strong\u003e 2 or 4 stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Types:\u003c\/strong\u003e Bay, Bow Riders, Fish, Flats, RIBs, Ski Boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel components with rubber boot seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 698690780205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years on metal components, 2 years on rubber boot covers and gas actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats 12 feet to 16 feet in length\u003c\/li\u003e\n\u003cli\u003e2 or 4 stroke engines, 40 HP to 80 HP\u003c\/li\u003e\n\u003cli\u003eRecommended for Bay, Bow Rider, Fish, Flats, RIBs, and Ski boats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Nauticus ST780-20 designed for?\u003c\/strong\u003e The ST780-20 is designed for boats 12 to 16 feet in length running 2 or 4 stroke engines rated from 40 HP to 80 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the trim tab planes in this kit?\u003c\/strong\u003e Each tab plane in the Nauticus ST780-20 kit measures 7 inches wide by 8 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich boat types is the ST780-20 recommended for?\u003c\/strong\u003e Nauticus recommends this kit for Bay, Bow Rider, Fish, Flats, RIBs, and Ski boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Smart Tab self-leveling system work?\u003c\/strong\u003e The ST780-20 uses self-contained nitrogen gas actuators that automatically adjust the trim tabs as speed and load change, leveling the boat without manual switches or controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes the stainless steel tab components, self-contained nitrogen gas actuators with rubber boot seals, and a complete owner's\/installation manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim tabs made from?\u003c\/strong\u003e The ST780-20 kit's structural components are stainless steel, with the actuators protected by rubber boot seals for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ST780-20 trim tab kit weigh?\u003c\/strong\u003e The Nauticus ST780-20 kit weighs 3.69 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty does Nauticus provide on the ST780-20?\u003c\/strong\u003e Nauticus warrants the ST780-20 to be free from defects in material and workmanship for 5 years on all metal components, and 2 years on the rubber boot covers and gas actuators, from the date of purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ST780-20 be installed without professional help?\u003c\/strong\u003e The kit comes with a complete owner's\/installation manual, and Nauticus Smart Tabs are designed to install on most transoms using the included hardware and instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ST780-20 suitable for engines larger than 80 HP?\u003c\/strong\u003e No, the ST780-20 is rated for 2 or 4 stroke engines from 40 HP to 80 HP; larger engines require a different Nauticus Smart Tab model sized for higher horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Nauticus ST780-20?\u003c\/strong\u003e The UPC for the Nauticus ST780-20 Smart Tab kit is 698690780205.\u003c\/p\u003e","brand":"Nauticus","offers":[{"title":"Default Title","offer_id":49028241162459,"sku":"NAU-ST780-20","price":137.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/nau-st780-20_lg__40511.1726755076.500.750.jpg?v=1785165274"},{"product_id":"nauticus-protroller-sxpt9510-60bl-60-lb-trim-tab-kit-with-trolling-brakes-9-5-x-10-inch-90-150-hp","title":"Nauticus ProTroller SXPT9510-60BL 60 lb Trim Tab Kit with Trolling Brakes, 9.5 x 10 Inch, 90-150 HP","description":"\u003cp\u003eThe Nauticus ProTroller SXPT9510-60BL is a 60 lb self-leveling trim tab kit that doubles as a trolling brake system, giving boaters two functions from one set of plates. With the actuator levers in the running position, the plates operate as fully automatic Smart Tabs, adjusting to sea conditions on their own without electric or hydraulic hardware and switches. Moving the levers to the down position converts the same plates into trolling brakes, applying equal braking on both sides of the boat so it tracks straight at ultra-low speeds. Because the propeller is never restricted, steering control is fully maintained in either mode.\u003c\/p\u003e\u003cp\u003eAs a trim system, the ProTroller reduces bow rise by 50% and cuts time to plane by 35% or more, while also improving side-to-side stability and overall ride quality. As a trolling brake, it reduces trolling speeds by 36% to 40% while dramatically improving steering and tracking control at slow speed. The kit can be tuned to the specific boat and to the operator's preference. Each plate assembly measures 9.5 inches wide by 10 inches deep and is rated as a 60 lb kit, designed for boats in the 90 HP to 150 HP range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Nauticus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SXPT9510-60BL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e ProTroller Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Self-Leveling Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate Width:\u003c\/strong\u003e 9.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate Depth:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Rating:\u003c\/strong\u003e 60 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Horsepower:\u003c\/strong\u003e 90 HP to 150 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 4.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum Alloys or Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e As Shown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Transom Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 698690951605\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e PT9510-60\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoats powered by 90 HP to 150 HP engines\u003c\/li\u003e\n\u003cli\u003e9.5 inch wide by 10 inch deep trim plane assembly, 60 lb kit rating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePT9510-60\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat horsepower range is the Nauticus SXPT9510-60BL designed for?\u003c\/strong\u003e The SXPT9510-60BL is designed for boats powered by 90 HP to 150 HP engines, with a 9.5 inch by 10 inch plate rated as a 60 lb kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this trim tab kit also work as a trolling brake?\u003c\/strong\u003e Yes, the ProTroller SXPT9510-60BL switches between automatic trim tabs and trolling brakes by moving a lever up or down, so one kit performs both functions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a trolling brake reduce trolling speed?\u003c\/strong\u003e With the ProTroller levers in the down (trolling brake) position, trolling speeds are reduced by 36% to 40% compared to running without the brakes engaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill using the trolling brake feature restrict steering?\u003c\/strong\u003e No, steering control is maintained because the propeller is not restricted when the SXPT9510-60BL plates are in the trolling brake position, unlike some other trolling brake systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the SXPT9510-60BL trim tab kit weigh?\u003c\/strong\u003e The Nauticus SXPT9510-60BL weighs 4.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the ProTroller trim tab plates made from?\u003c\/strong\u003e The SXPT9510-60BL plates are constructed from aluminum alloys or stainless steel components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim tab function on the SXPT9510-60BL require electric or hydraulic hardware?\u003c\/strong\u003e No, in the running position the SXPT9510-60BL operates as a fully automatic Smart Tab system that adjusts to sea conditions without electric or hydraulic hardware or switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab plates on this kit?\u003c\/strong\u003e Each plate on the SXPT9510-60BL measures 9.5 inches wide by 10 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a part number that cross-references to the SXPT9510-60BL?\u003c\/strong\u003e The SXPT9510-60BL is equivalent to OEM part number PT9510-60.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat benefits does the automatic trim mode provide on the SXPT9510-60BL?\u003c\/strong\u003e In automatic trim mode, the SXPT9510-60BL reduces bow rise by 50%, cuts time to plane by 35% or more, and improves side-to-side stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SXPT9510-60BL be tuned to a specific boat?\u003c\/strong\u003e Yes, the ProTroller system can be tuned to the specific boat and to the boater's preference for both its trim tab and trolling brake functions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is tracking affected when using the SXPT9510-60BL as a trolling brake?\u003c\/strong\u003e With the levers down, the SXPT9510-60BL plates create equal braking on both sides of the boat, which improves tracking straight at ultra-low speeds.\u003c\/p\u003e","brand":"Nauticus","offers":[{"title":"Default Title","offer_id":49028241391835,"sku":"NAU-SXPT9510-60BL","price":197.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Pro-Troller__96755.1726243505.500.750.jpg?v=1785165278"},{"product_id":"stingray-classic-pro-hydrofoil-sr-pro-1-black-graphite-boat-stabilizer","title":"StingRay Classic Pro Hydrofoil SR-PRO-1 - Black Graphite Boat Stabilizer","description":"\u003cp\u003eThe StingRay Classic Pro Hydrofoil (SR-PRO-1) is a boat stabilizer designed to mount to the outboard or sterndrive of a boat to improve running performance and ride quality. Its wide wing design provides increased lift under the hull, helping the boat get on plane faster, hold a more level running attitude, and resist bow-rise and porpoising. Boaters typically see quicker holeshots without sacrificing top-end speed, along with fuel savings from running more efficiently on plane. The added stability also helps produce a safer, smoother ride in chop and when carrying uneven loads.\u003c\/p\u003e\u003cp\u003eThe Classic Pro is molded from graphite in a black finish and is built as a single-piece unit for straightforward bolt-on installation using the boat's existing engine mounting hardware, without extensive modification. It weighs 5.75 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e StingRay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SR-PRO-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydrofoil \/ Boat Stabilizer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Graphite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 096144001805\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the StingRay Classic Pro Hydrofoil SR-PRO-1 used for?\u003c\/strong\u003e The SR-PRO-1 is a hydrofoil that mounts to a boat's outboard or sterndrive to add lift under the hull, improving holeshot, reducing bow-rise, and helping the boat run flatter and more stable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the SR-PRO-1 hydrofoil made from?\u003c\/strong\u003e It is made from graphite, finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the StingRay SR-PRO-1 hydrofoil weigh?\u003c\/strong\u003e The SR-PRO-1 weighs 5.75 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many pieces come in the StingRay Classic Pro Hydrofoil package?\u003c\/strong\u003e The SR-PRO-1 is a single-piece hydrofoil (1 piece).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill installing the SR-PRO-1 hydrofoil slow down my boat's top speed?\u003c\/strong\u003e No. The Classic Pro Hydrofoil is designed to improve holeshot and stability without restraining top-end performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the StingRay Classic Pro Hydrofoil help with bow-rise or porpoising?\u003c\/strong\u003e Yes, its wide wing design adds lift at the stern to help level out the boat's running angle, which helps reduce bow-rise and porpoising.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the SR-PRO-1 hydrofoil come in?\u003c\/strong\u003e The StingRay Classic Pro Hydrofoil (SR-PRO-1) is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the StingRay SR-PRO-1 hydrofoil easy to install?\u003c\/strong\u003e Yes, it is designed to be installed with minimal effort using the boat's existing engine mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the SR-PRO-1 hydrofoil improve fuel economy?\u003c\/strong\u003e Yes, by helping the boat get on plane more efficiently, the StingRay Classic Pro Hydrofoil can contribute to monetary\/fuel savings during operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the StingRay Classic Pro Hydrofoil genuine StingRay product?\u003c\/strong\u003e Yes, the SR-PRO-1 is a genuine StingRay Classic Pro Series Hydrofoil, not a generic aftermarket copy.\u003c\/p\u003e","brand":"Stingray Hydrofoils","offers":[{"title":"Default Title","offer_id":49031342391515,"sku":"M-D-SR-PRO-1","price":151.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31leOOZiBgL.jpg?v=1785213347"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/Pro-Troller__96755.1726243505.500.750_0d3d7030-a1da-4abe-9fa7-329242fe32fc.jpg?v=1785356972","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trim-tilt-jack-plates-trim-tabs-trim-tab-kits-hydraulic-electric.oembed?page=2","provider":"Good Vibes Marina","version":"1.0","type":"link"}