{"title":"Trim Tab Switches, Gauges \u0026 Relays","description":null,"products":[{"product_id":"yamaha-outboard-power-trim-relay-assembly-63p-81950-00-fits-25-250-hp-2004-up-sierra-18-1522","title":"Sierra 18-1522 Trim Assembly Relay - Replaces Yamaha 63P-81950-00-00 - Fits Yamaha Outboards","description":"\u003cp\u003eThe Sierra 18-1522 Trim Assembly Relay is a replacement electrical relay for Yamaha outboard power trim and tilt systems. It controls the switching of current to the trim motor circuit, allowing the trim\/tilt system to raise and lower the outboard on command. This relay is built to OEM specification, using a screw connector type and silver contact material for reliable current-carrying capacity, with a normally open contact type and automatic operation mode. It is designed as a panel mount component, matching the mounting configuration of the original Yamaha relay it replaces.\u003c\/p\u003e\u003cp\u003eThis relay directly replaces Yamaha part number 63P-81950-00-00 and is intended to fit a range of Yamaha outboard motors, including 25-150 HP and 200-225 HP models (06-Up), 50-90 HP and 250 HP models (05-Up), and 150 HP models (04-Up). Buyers replacing a failed or intermittent trim relay on a compatible Yamaha outboard can use this part as a direct swap. Sierra parts are backed by Sierra's customer satisfaction warranty, giving added confidence when replacing electrical components in the trim system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-1522\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Yamaha Outboard Trim System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e OEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282375584\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha outboards, 25-150 HP and 200-225 HP (06-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha outboards, 50-90 HP and 250 HP (05-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha outboards, 150 HP (04-Up)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha 63P-81950-00-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-1522 Trim Assembly Relay do?\u003c\/strong\u003e It is an electrical relay that switches current to the power trim and tilt motor circuit on compatible Yamaha outboards, letting the trim\/tilt system raise and lower the outboard when commanded.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-1522 a direct replacement for the original Yamaha relay?\u003c\/strong\u003e Yes, the 18-1522 replaces Yamaha part number 63P-81950-00-00 and is built to OEM specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Yamaha outboards does the 18-1522 trim relay fit?\u003c\/strong\u003e It fits Yamaha outboards of 25-150 HP and 200-225 HP (06-Up), 50-90 HP and 250 HP (05-Up), and 150 HP (04-Up).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the contact type on this relay?\u003c\/strong\u003e The Sierra 18-1522 uses a normally open contact type with silver contact material for reliable switching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-1522 relay mounted?\u003c\/strong\u003e It is a panel mount relay with a screw-type connector for wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-1522 Trim Assembly Relay weigh?\u003c\/strong\u003e It weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an automatic or manual relay?\u003c\/strong\u003e The 18-1522 operates automatically, switching current to the trim motor circuit without manual actuation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-1522 come with a warranty?\u003c\/strong\u003e Yes, Sierra part 18-1522 is covered under Sierra's customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 18-1522?\u003c\/strong\u003e The order includes one Sierra Trim Assembly Relay, part number 18-1522.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-1522 genuine Sierra or aftermarket?\u003c\/strong\u003e It is a genuine Sierra-branded part manufactured to OEM specification, sold as Sierra 18-1522.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Sierra 18-1522?\u003c\/strong\u003e The UPC for the Sierra 18-1522 Trim Assembly Relay is 808282375584.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988088271067,"sku":"SIE-18-1522","price":216.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-1522__80657.1722494184.500.750.jpg?v=1785188366"},{"product_id":"sierra-18-1523-trim-relay-assembly-for-yamaha-outboards-replaces-61a-81950-01-00-f25-250-hp","title":"Sierra 18-1523 Trim Assembly Relay, Replaces 61A-81950-01, Fits Yamaha 60-250 HP Outboards","description":"\u003cp\u003eThe Sierra 18-1523 Trim Assembly Relay is a direct replacement electrical relay for the power trim and tilt system on a wide range of Yamaha outboard motors. This relay is the component that switches power to the trim motor, allowing the operator to raise and lower the outboard's tilt angle from the helm. When a trim relay fails or corrodes, the outboard can lose the ability to trim up or down, or the trim motor may run continuously or not at all, so replacing the relay restores normal, controlled trim operation.\u003c\/p\u003e\u003cp\u003eThis relay uses a plug-in connector for a straightforward, tool-minimal installation and mounts using a DIN rail mount configuration, consistent with the factory relay layout used in Yamaha's trim system wiring harness. Internally it uses copper contacts for reliable current conduction and consistent switching performance, and it is built to meet OEM specification so it operates as a like-for-like swap for the original relay. Sierra backs this part with its standard customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003eThe 18-1523 fits a broad range of Yamaha outboard horsepower and model designations, including F25, T25, 60, 70, 75, 80, 85, 90, 150, 200, 225, and 250 HP models across the specific model years listed below, making it a common service and maintenance replacement part for Yamaha outboard trim systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-1523\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trim Assembly Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Plug-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e DIN Rail Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e OEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282375621\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha F25 HP (98-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha T25 HP (01-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha 60 HP (93-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha 70 HP (93-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha 75 HP (94-99)\u003c\/li\u003e\n\u003cli\u003eYamaha 80 HP (97)\u003c\/li\u003e\n\u003cli\u003eYamaha 85 HP (93-96)\u003c\/li\u003e\n\u003cli\u003eYamaha 90 HP (93-09)\u003c\/li\u003e\n\u003cli\u003eYamaha 150 HP (99-05)\u003c\/li\u003e\n\u003cli\u003eYamaha 200 HP (98-05)\u003c\/li\u003e\n\u003cli\u003eYamaha 225 HP (90-04)\u003c\/li\u003e\n\u003cli\u003eYamaha 250 HP (90-04)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e61A-81950-01\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-1523 trim assembly relay replace?\u003c\/strong\u003e The Sierra 18-1523 is a direct replacement for Yamaha OEM part number 61A-81950-01.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Yamaha outboards does this relay fit?\u003c\/strong\u003e This relay fits Yamaha F25 HP (98-Up), T25 HP (01-Up), 60 HP (93-Up), 70 HP (93-Up), 75 HP (94-99), 80 HP (97), 85 HP (93-96), 90 HP (93-09), 150 HP (99-05), 200 HP (98-05), 225 HP (90-04), and 250 HP (90-04) outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-1523 a genuine OEM part or an aftermarket equivalent?\u003c\/strong\u003e The Sierra 18-1523 is an aftermarket relay built to meet OEM specification, providing equivalent form, fit, and function to the original Yamaha trim relay it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector does this relay use?\u003c\/strong\u003e The 18-1523 trim assembly relay uses a plug-in connector type, matching the factory wiring harness connection on supported Yamaha outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the trim relay mounted?\u003c\/strong\u003e The Sierra 18-1523 uses a DIN rail mounting type, consistent with the mounting configuration used in the Yamaha trim system wiring layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shipping weight of this part?\u003c\/strong\u003e The Sierra 18-1523 trim assembly relay weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-1523 fit Yamaha F25 and T25 models?\u003c\/strong\u003e Yes, the 18-1523 fits Yamaha F25 HP (98-Up) and T25 HP (01-Up) outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order this part?\u003c\/strong\u003e Ordering the Sierra 18-1523 includes one trim assembly relay, ready to install in place of the original Yamaha 61A-81950-01 relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the contact material inside the relay?\u003c\/strong\u003e The 18-1523 relay uses copper contacts, which support reliable current conduction and consistent switching for the trim circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this relay used for the trim and tilt system specifically?\u003c\/strong\u003e Yes, the Sierra 18-1523 is a trim assembly relay used in the power trim and tilt circuit of supported Yamaha outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a warranty included with the 18-1523?\u003c\/strong\u003e Sierra parts, including the 18-1523 trim assembly relay, are covered under Sierra's standard customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would a trim relay need to be replaced?\u003c\/strong\u003e A failed or corroded trim relay like the original Yamaha 61A-81950-01 can cause the outboard's trim motor to stop responding, run continuously, or lose consistent trim control, which is why the 18-1523 replacement is used to restore normal operation.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988088467675,"sku":"SIE-18-1523","price":149.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-1523__01469.1722510501.500.750.jpg?v=1785188419"},{"product_id":"power-trim-relay-for-johnson-evinrude-8-9-9-15-hp-outboards-replaces-oem-584580-5-terminal-12v-spdt-sierra-18-5705","title":"Sierra Power Trim Relay 18-5705 for Evinrude Outboard Trim Systems","description":"\u003cp\u003eThe Sierra 18-5705 is a power trim relay built for Evinrude outboard trim systems. Trim relays like this one control the electrical circuit that drives the trim\/tilt pump motor, switching power to raise or lower the outboard on command. As a dedicated replacement relay, it is sized to slot into the trim system wiring without modification, giving boat owners a straightforward way to restore trim function when an original relay fails or corrodes.\u003c\/p\u003e\u003cp\u003eThis part is also offered in a display-packaged version, part number 18-5705D, which is the same relay presented in retail packaging rather than bulk packaging - the relay itself is identical between the two part numbers. At just 0.08 pounds, it is a compact, lightweight electrical component designed to mount within the existing trim relay bracket or wiring harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5705\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Evinrude outboard trim systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay-Packaged Version:\u003c\/strong\u003e 18-5705D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999319517\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5705 used for?\u003c\/strong\u003e The Sierra 18-5705 is a power trim relay used in Evinrude outboard trim systems, where it switches electrical power to the trim\/tilt pump motor to raise or lower the outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5705 come in a display-packaged version?\u003c\/strong\u003e Yes, the same relay is also sold as part number 18-5705D, which is the display-packaged version rather than bulk packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 18-5705 and 18-5705D?\u003c\/strong\u003e Only the packaging differs - 18-5705D is the display-packaged version of the identical 18-5705 power trim relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5705 power trim relay weigh?\u003c\/strong\u003e It weighs 0.08 pounds, making it a lightweight electrical component within the trim system wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5705?\u003c\/strong\u003e The UPC for the Sierra 18-5705 power trim relay is 030999319517.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5705 a genuine Sierra part?\u003c\/strong\u003e Yes, part number 18-5705 is a Sierra-branded power trim relay manufactured under the Sierra name for marine trim systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard brand does the 18-5705 relay support?\u003c\/strong\u003e The 18-5705 is categorized for Evinrude outboard trim systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the 18-5705?\u003c\/strong\u003e Ordering part number 18-5705 gets you the power trim relay itself; no additional accessories are specified with this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5705 a trim relay or a trim motor?\u003c\/strong\u003e The 18-5705 is a power trim relay, an electrical switching component, not the trim\/tilt pump motor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-5705 replace a corroded or failed trim relay?\u003c\/strong\u003e A failing or corroded trim relay in an Evinrude trim system can be replaced with the Sierra 18-5705 power trim relay.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988228026587,"sku":"SIE-18-5705","price":20.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5705__83355.1730098990.500.750.jpg?v=1785329179"},{"product_id":"sierra-18-5737-power-trim-relay-for-mercury-mariner-35-220-hp-outboards-1985-1993-replaces-mercury-87-19761","title":"Sierra Power Trim Relay 18-5737 for Mercury 40 HP 4-Cylinder Outboards, Replaces 87-19761","description":"\u003cp\u003eThe Sierra 18-5737 Power Trim Relay is a boat-mount electrical relay used in the power trim and tilt circuit of applicable Mercury outboard motors. It uses a quick connect terminal style and a normally open contact configuration, allowing it to switch the higher current draw of the trim\/tilt motor circuit when the operator engages trim or tilt at the control switch. This relay is designed for Mercury 40 HP 4-cylinder outboards equipped with relays, covering units from serial number 0C159200 and up. It is a direct interchange for Mercury cross-reference number 87-19761, so it can be installed as a like-for-like replacement without modification to the existing wiring harness or mounting hardware. The relay ships as a single unit and is intended as a drop-in replacement part for boat owners and marine technicians performing trim system diagnostics or relay replacement on affected Mercury outboards. As with all Sierra electrical components, the 18-5737 is built to meet or exceed the performance of the original equipment part it replaces, giving boaters a reliable option for restoring proper power trim operation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5737\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Boat Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282103392\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 relay\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 40 HP 4-cylinder outboards with relays, serial number 0C159200 and up\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 87-19761\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5737 used for?\u003c\/strong\u003e The Sierra 18-5737 is a power trim relay that switches the trim\/tilt motor circuit on applicable Mercury outboards when the operator activates the trim or tilt control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5737 relay fit my Mercury outboard?\u003c\/strong\u003e The 18-5737 fits Mercury 40 HP 4-cylinder outboards equipped with relays, from serial number 0C159200 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5737 a direct replacement for the Mercury OEM relay?\u003c\/strong\u003e Yes, part number 18-5737 is a direct interchange for Mercury cross-reference number 87-19761 and installs in place of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical connection does this relay use?\u003c\/strong\u003e The 18-5737 Power Trim Relay uses a quick connect terminal style, so it attaches to the existing trim circuit wiring without needing to splice or solder connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5737 relay normally open or normally closed?\u003c\/strong\u003e It is a normally open (N.O.) contact relay, meaning the circuit stays open until the trim switch is activated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra 18-5737 relay mounted?\u003c\/strong\u003e This is a boat-mount relay, meaning it is secured to a mounting surface on the boat or engine rather than being a plug-in or panel style unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5737 relay weigh?\u003c\/strong\u003e The Sierra 18-5737 Power Trim Relay weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many relays come in the package?\u003c\/strong\u003e The 18-5737 is sold as a single relay unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5737 an OEM or aftermarket part?\u003c\/strong\u003e The 18-5737 is a Sierra aftermarket relay built to meet or exceed the performance of the original Mercury 87-19761 relay it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5737 relay come with a warranty?\u003c\/strong\u003e The Sierra 18-5737 Power Trim Relay is covered under Sierra's standard limited warranty against defects.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988229927131,"sku":"SIE-18-5737","price":50.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5737_lg__31133.1558129347.500.750.jpg?v=1785188925"},{"product_id":"sierra-18-5849-shrouded-power-trim-relay-replaces-mercury-882751a1-828151-fits-most-2-4-stroke-non-verado-outboards","title":"Sierra 18-5849 Shrouded Trim Relay, White, for Mercury 100 HP 4 Cylinder Outboards","description":"\u003cp\u003eThe Sierra 18-5849 is a shrouded trim relay used to control the power trim and tilt circuit on applicable outboard engines. The white shrouded housing encloses the internal contacts to help shield them from moisture, salt spray, and debris in the engine compartment, while the panel mount design allows it to install into the same relay location as the original part. It is built as a three-terminal, quick-connect relay with a normally open contact configuration and nickel iron alloy contacts for consistent switching performance under repeated trim and tilt cycling.\u003c\/p\u003e\u003cp\u003eThis relay is engineered to meet or exceed the specifications of the original equipment part it replaces, and it is interchangeable with a number of OEM and aftermarket cross-reference numbers, making it a straightforward replacement for boat owners who need to restore trim function without waiting on an OEM-only part. It fits Mercury 100 HP 4 cylinder outboards equipped with 1 Ram Trim and a 5\/16-18 starter terminal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5849\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shrouded Trim Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Nickel Iron Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 100 HP 4 Cylinder outboards with 1 Ram Trim and 5\/16-18 starter terminal\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCDI 852-9819\u003c\/li\u003e\n\u003cli\u003eChrysler\/Force\/US Marine 828151\u003c\/li\u003e\n\u003cli\u003eChrysler\/Force\/US Marine 828151A1\u003c\/li\u003e\n\u003cli\u003eMallory 9-15210\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 882751A1\u003c\/li\u003e\n\u003cli\u003eMercury Marine 828151\u003c\/li\u003e\n\u003cli\u003eMercury Marine 828151A1\u003c\/li\u003e\n\u003cli\u003eMercury Marine 882751A1\u003c\/li\u003e\n\u003cli\u003eMercury Marine 882751A2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5849 relay do?\u003c\/strong\u003e The Sierra 18-5849 is a shrouded trim relay that controls the power trim and tilt circuit on applicable outboard engines, switching power to the trim motor when the operator raises or lowers the drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5849 fit my Mercury outboard?\u003c\/strong\u003e The 18-5849 fits Mercury 100 HP 4 cylinder outboards equipped with 1 Ram Trim and a 5\/16-18 starter terminal; check your engine's trim configuration and starter terminal size against these details before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5849 relay interchangeable with OEM Mercury Marine relays?\u003c\/strong\u003e Yes, the 18-5849 cross-references to Mercury Marine 828151, 828151A1, 882751A1, and 882751A2, along with Mercruiser Stern Drive 882751A1, so it can directly replace those OEM numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5849 cross-reference to any non-Mercury brands?\u003c\/strong\u003e Yes, this relay also cross-references to CDI 852-9819, Chrysler\/Force\/US Marine 828151 and 828151A1, and Mallory 9-15210.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 18-5849 relay have?\u003c\/strong\u003e It has 3 terminals and uses a quick-connect connector type, with a normally open contact configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the contacts made of?\u003c\/strong\u003e The internal contacts on the 18-5849 are made of nickel iron alloy, chosen for reliable switching under repeated trim and tilt use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-5849 relay housing?\u003c\/strong\u003e The housing is white with a shrouded design that helps protect the internal contacts from moisture and debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-5849 relay mounted?\u003c\/strong\u003e It uses a panel mount design, allowing it to install into the same mounting location as the original relay it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5849 relay weigh?\u003c\/strong\u003e The Sierra 18-5849 trim relay weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5849 an OEM part or an aftermarket replacement?\u003c\/strong\u003e The 18-5849 is a Sierra-manufactured replacement relay engineered to meet or exceed the specifications of the original equipment part it replaces, rather than an OEM Mercury Marine part itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5849?\u003c\/strong\u003e You receive one Sierra 18-5849 shrouded trim relay, ready to install in place of the original trim relay.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988327968987,"sku":"SIE-18-5849","price":16.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__12397.1773550942.500.750.jpg?v=1785188653"},{"product_id":"sierra-18-99523-tilt-trim-relay-assembly-for-mercury-outboards","title":"Sierra Tilt\/Trim Relay Assembly 18-99523 for Mercury Outboard Motors","description":"\u003cp\u003eThe Sierra 18-99523 is a tilt\/trim relay assembly built for Mercury outboard motors. The relay assembly is the electrical switching component that directs battery current to the tilt\/trim motor when the operator raises or lowers the outboard, and a failed or corroded relay is a common reason a trim system stops responding even though the trim motor and pump themselves are still good. Replacing the relay assembly with a properly matched unit restores reliable up\/down operation without having to replace the entire trim motor.\u003c\/p\u003e\u003cp\u003eThis assembly ships as a complete unit under part number 18-99523, making it a straightforward swap for the outboard's existing tilt\/trim relay. It is sold and identified by its own UPC for easy verification against your outboard's electrical system before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99523\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tilt\/Trim Relay Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercury Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282395070\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury outboard motors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-99523?\u003c\/strong\u003e It is a tilt\/trim relay assembly, part number 18-99523, designed for Mercury outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a tilt\/trim relay assembly do?\u003c\/strong\u003e The relay assembly switches battery current to the outboard's tilt\/trim motor, allowing the operator to raise and lower the outboard using the trim controls; the Sierra 18-99523 is the relay assembly for that circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-99523 relay assembly fit my Mercury outboard?\u003c\/strong\u003e The Sierra 18-99523 tilt\/trim relay assembly is built for Mercury outboard motors; confirm against your outboard's existing relay before ordering since exact model coverage is not listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-99523 relay assembly weigh?\u003c\/strong\u003e The Sierra 18-99523 tilt\/trim relay assembly weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-99523 sold as a complete relay assembly or individual parts?\u003c\/strong\u003e It is sold as a complete tilt\/trim relay assembly under part number 18-99523, ready to install as a unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99523 relay assembly?\u003c\/strong\u003e The UPC for the Sierra 18-99523 tilt\/trim relay assembly is 808282395070, which can be used to verify the correct product before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my outboard's tilt\/trim relay?\u003c\/strong\u003e A worn or corroded relay is a common cause of an unresponsive tilt\/trim system even when the trim motor itself is fine; installing the Sierra 18-99523 relay assembly addresses that failure point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-99523 relay assembly include mounting hardware?\u003c\/strong\u003e The listing covers the tilt\/trim relay assembly itself, part number 18-99523; additional mounting hardware details are not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99523 a direct replacement relay assembly?\u003c\/strong\u003e The Sierra 18-99523 is offered as a direct-fit tilt\/trim relay assembly for Mercury outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 18-99523 tilt\/trim relay?\u003c\/strong\u003e The 18-99523 tilt\/trim relay assembly is manufactured by Sierra for Mercury outboard applications.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445343963,"sku":"SIE-18-99523","price":110.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-852-9820_lg__99719.1558114406.500.750.jpg?v=1785329187"},{"product_id":"t-h-marine-ttc-1-push-button-transom-trim-control-switch-50-amp-weatherproof-tilt-trim-hydraulic-jack-plate-switch-black","title":"T-H Marine TTC-1 Push Button Trim Switch, 50 Amp, for Outboards, Stern Drives and Hydraulic Jack Plates","description":"\u003cp\u003eThe T-H Marine TTC-1 is a push button transom trim control switch built to put reliable tilt and trim control anywhere it is needed on the boat. Rather than being locked into a single factory switch location, this versatile switch can be surface mounted on any flat area near the stern, giving one person full control of positioning the motor support without help. Beyond standard outboard and stern drive trim duty, the TTC-1 also works for remote adjustment of hydraulic jack plates, making it a flexible control option for boats running jack plate setups.\u003c\/p\u003e\u003cp\u003eThe switch housing is molded black plastic with raised white lettering for easy identification at the helm or transom, and the design is weatherproof with an IP54 ingress protection rating to stand up to spray and marine conditions. Internally it is a normally closed, 2-way push button switch rated for 50 amps at 12 volts DC, sized to handle the current draw of trim and jack plate motors. Each switch comes with an 18 inch pigtail wire and installation instructions, simplifying wiring into the existing trim circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e TTC-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Push Button Trim Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 50 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Molded black plastic with raised white lettering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 18 inch pigtail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.6 x 4 x 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e 30 to 120 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, any flat surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e Outboards, stern drives, hydraulic jack plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572003406\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine TTC-1 used for?\u003c\/strong\u003e The TTC-1 is a push button transom trim control switch that gives one person weatherproof control of motor trim and tilt from anywhere it is mounted on the boat, and it can also be used for remote adjustment of hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the TTC-1 work with a hydraulic jack plate?\u003c\/strong\u003e Yes, in addition to standard trim and tilt duty on outboards or stern drives, the TTC-1 can be used to remotely operate hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the TTC-1 trim switch?\u003c\/strong\u003e The TTC-1 is rated for 50 amps, sized to handle the current draw of trim and jack plate motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the TTC-1 trim switch operate on?\u003c\/strong\u003e The TTC-1 operates on a 12 volt DC marine electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the TTC-1 switch mounted?\u003c\/strong\u003e The TTC-1 housing is designed for surface mounting and can be installed on any flat surface, so it does not have to go in a fixed factory switch location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the TTC-1 switch?\u003c\/strong\u003e Each T-H Marine TTC-1 comes with an 18 inch pigtail wire and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the TTC-1 switch housing made of?\u003c\/strong\u003e The TTC-1 housing is molded black plastic with raised white lettering for easy identification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TTC-1 switch weatherproof?\u003c\/strong\u003e Yes, the TTC-1 has a weatherproof, UV stable molded housing with an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the TTC-1?\u003c\/strong\u003e The T-H Marine TTC-1 measures 7.6 x 4 x 1.6 inches and weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical contact does the TTC-1 use?\u003c\/strong\u003e The TTC-1 is a normally closed, 2-way push button switch with 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TTC-1 compatible with outboards and stern drives?\u003c\/strong\u003e Yes, the TTC-1 is designed as a trim switch for both outboards and stern drives, in addition to hydraulic jack plate operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the TTC-1 need to be mounted in the original switch location?\u003c\/strong\u003e No, the TTC-1 is built to be mounted anywhere on a flat surface, letting installers place trim or jack plate control wherever it is most convenient rather than being limited to the stock switch location.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991273255131,"sku":"T-H-TTC-1","price":53.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/push-button-trim-switch-28269087490091.jpg?v=1784499098"},{"product_id":"power-trim-relay-for-evinrude-johnson-outboards-replaces-18-5705-mpn-300-01561","title":"EMP Power Trim Relay for Evinrude Outboard Motors, Part 300-01561","description":"\u003cp\u003eThe EMP Power Trim Relay, part number 300-01561, is an electrical relay built for the power trim and tilt systems on Evinrude outboard motors. The trim relay is the switching component that directs battery current to the trim\/tilt pump motor when the operator presses the trim switch, allowing the outboard to raise and lower under power. When a trim relay fails or sticks, the outboard may not tilt or trim at all, or may trim in only one direction, so replacing the relay with a properly rated unit restores normal up\/down operation.\u003c\/p\u003e\u003cp\u003eThis relay is built to handle the higher current draw of a trim\/tilt motor circuit and is sized as a direct fit for Evinrude outboard trim relay applications. It is a compact, sealed electrical component intended to mount in the existing relay location in the outboard's wiring harness alongside the trim\/tilt system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e EMP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 300-01561\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Trim Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Evinrude outboard motor trim\/tilt systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840080465227\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.082 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the EMP 300-01561 relay used for?\u003c\/strong\u003e EMP part 300-01561 is a power trim relay that switches battery current to the trim\/tilt pump motor on an Evinrude outboard, allowing the motor to raise and lower when the trim switch is pressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this relay fit my Evinrude outboard?\u003c\/strong\u003e The EMP 300-01561 is designed for Evinrude outboard motor trim\/tilt systems; check that your outboard's trim relay is the failed component before ordering a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my trim relay needs to be replaced?\u003c\/strong\u003e If an Evinrude outboard will not tilt or trim, trims in only one direction, or the trim motor runs but the outboard does not move, a failed trim relay such as the EMP 300-01561 is a common cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the EMP 300-01561 trim relay weigh?\u003c\/strong\u003e The EMP 300-01561 power trim relay weighs 0.082 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the EMP 300-01561 relay?\u003c\/strong\u003e The UPC for the EMP 300-01561 Power Trim Relay is 840080465227.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the EMP 300-01561 an OEM or aftermarket part?\u003c\/strong\u003e EMP 300-01561 is an aftermarket power trim relay manufactured to serve as a direct replacement in Evinrude outboard trim\/tilt circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part 300-01561?\u003c\/strong\u003e Ordering EMP 300-01561 includes one power trim relay for the Evinrude outboard trim\/tilt system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the trim relay myself?\u003c\/strong\u003e The EMP 300-01561 relay mounts in the outboard's existing trim relay location and connects to the existing wiring harness, which allows for straightforward replacement by anyone comfortable working with marine electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim relay affect steering or only trim\/tilt?\u003c\/strong\u003e The EMP 300-01561 relay is part of the trim\/tilt circuit only; it controls the up and down movement of the outboard and is not part of the steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms show up specifically from a bad trim relay versus a bad trim motor?\u003c\/strong\u003e With a failed trim relay like the EMP 300-01561, the trim\/tilt motor typically will not run at all in the affected direction because it is not receiving switched power, whereas a bad trim motor may hum or draw current without moving the outboard.\u003c\/p\u003e","brand":"EMP","offers":[{"title":"Default Title","offer_id":48991284592859,"sku":"EMP-300-01561","price":15.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/EMP-300-03085-BRP-Power-Trim-Relay__95312.1722371794.500.750.jpg?v=1785329112"},{"product_id":"bennett-pro-auto-trim-tab-switch-for-bolt-electric-trim-tab-systems-12v","title":"Bennett Pro Auto Trim Tab Switch for BOLT Electric Trim Tab Systems, 12V","description":"\u003cp\u003eThe Bennett Pro Auto Trim Tab Switch is an all-in-one trim tab control keypad built for BOLT electric trim tab systems, combining automatic trim tab control, manual trim tab control, and trim tab position indication in a single space-saving unit. Once set, it automatically adjusts the boat's trim tabs to level pitch and roll as speed, sea conditions, and weight distribution change, working much like cruise control for your tabs. Full manual command is always available at the touch of a button, including one-touch buttons for full up (running in a following sea or coming into the beach) and full down (hole-shot).\u003c\/p\u003e\u003cp\u003eThe switch stores 2 favorite automatic running attitudes in memory and displays real-time AutoTrim Pro adjustments and trim tab position through LED indicators with adjustable light intensity. Response time is OEM customizable, so it can be configured to match engine power, hull type, actuator type, or trim tab size. When the boat's ignition is switched off, automatic tab retraction returns the trim tabs to the full up position. Installation uses plug and play waterproof snap-on connectors for straightforward assembly, and the system is fully compatible with all Bennett systems as well as most other electric trim tab systems. The switch ships with the ATP control unit, ATP helm display, and plug-and-play waterproof connectors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500956600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e BOLT Electric Trim Tab Systems; also compatible with most other electric trim tab systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Automatic and manual trim tab control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition Indication:\u003c\/strong\u003e LED indicators with adjustable light intensity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse Time:\u003c\/strong\u003e OEM customizable (adjustable for engine power, hull type, actuator type, or trim tab size)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory Settings:\u003c\/strong\u003e Stores 2 favorite automatic running attitudes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetraction:\u003c\/strong\u003e Automatic tab retraction to full up position at ignition off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Plug and play waterproof snap-on connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e ATP control unit, ATP helm display, plug and play waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285202067\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett Pro Auto Trim Tab Switch do?\u003c\/strong\u003e It is an all-in-one trim tab control system that combines automatic trim tab control, manual trim tab control, and trim tab position indication in a single space-saving keypad, automatically adjusting trim tab position to help level the boat's pitch and roll as conditions change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch work with a trim tab system that isn't made by Bennett?\u003c\/strong\u003e Yes, the Bennett Pro Auto Trim Tab Switch is fully compatible with all Bennett systems and most other electric trim tab systems, though it's designed for BOLT electric trim tab systems, so it's worth reviewing your current setup before ordering to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I take manual control of the trim tabs instead of running them automatically?\u003c\/strong\u003e Yes, full manual control is available at any time with the touch of a button, and the Bennett Pro Auto Trim Tab Switch also includes one-touch manual full up and full down buttons for quick adjustments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many automatic trim settings can be saved?\u003c\/strong\u003e The Bennett Pro Auto Trim Tab Switch lets you store 2 favorite automatic running attitudes in memory for quick recall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the trim tabs retract automatically when the boat is shut off?\u003c\/strong\u003e Yes, automatic tab retraction returns the trim tabs to the full up position when the boat's ignition is switched off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Bennett Pro Auto Trim Tab Switch?\u003c\/strong\u003e It ships with the ATP control unit, ATP helm display, and plug-and-play waterproof connectors needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch show the current position of the trim tabs?\u003c\/strong\u003e Yes, LED indicators with adjustable light intensity display real-time trim tab position and AutoTrim Pro adjustments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Bennett Pro Auto Trim Tab Switch designed for?\u003c\/strong\u003e This switch is a 12V trim tab control unit built for BOLT electric trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the response time be adjusted for my boat?\u003c\/strong\u003e Yes, the response time is OEM customizable and can be configured to match engine power, hull type, actuator type, or trim tab size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this switch and the Bennett Hydraulic Pro Auto Trim Tab Switch?\u003c\/strong\u003e The Bennett Pro Auto Trim Tab Switch (6BT500956600) is built for BOLT electric trim tab systems, while the Bennett Hydraulic Pro Auto Trim Tab Switch adds compatibility with hydraulic trim tab systems as well as electric ones; both offer the same automatic control, manual override, and LED position indication features.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the wiring connections protected from water?\u003c\/strong\u003e The Bennett Pro Auto Trim Tab Switch uses plug and play waterproof snap-on connectors, making assembly straightforward while protecting the wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett Pro Auto Trim Tab Switch weigh?\u003c\/strong\u003e The switch weighs 5 pounds.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450208475,"sku":"BEN-AP000A1BC","price":761.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-AP00A1BC__27240.1739462525.500.750.jpg?v=1785163391"},{"product_id":"bennett-hydraulic-pro-auto-trim-tab-switch-part-6bt500956500-for-electric-or-hydraulic-trim-tab-systems","title":"Bennett Hydraulic Pro Auto Trim Tab Switch, Part 6BT500956500, for Electric or Hydraulic Trim Tab Systems","description":"\u003cp\u003eThe Bennett Hydraulic Pro Auto Trim Tab Switch is an all-in-one trim tab control keypad that combines automatic trim tab control, manual trim tab control, and trim tab position indication in a single space-saving unit. Acting like cruise control for your trim tabs, it automatically levels the pitch and roll of the boat, adjusting the tabs as vessel speed, sea conditions, and weight distribution change, while still letting the operator take full manual command at any time with the touch of a button. This switch is an affordable upgrade that can be added to most existing trim tab systems, electric or hydraulic, and is fully compatible with all Bennett systems as well as most other trim tab setups. Installation is simple and straightforward.\u003c\/p\u003e\u003cp\u003eKey functions include auto trim tab control with memory storage for two favorite running attitudes, real-time AutoTrim Pro adjustment indication via LED, manual tab control with automatic override activated by pressing anywhere on the bow up or down buttons, and OEM-customizable response time so the system can be tuned to engine power, hull type, actuator type, or trim tab size. Trim tab position is shown through LED indicators with adjustable light intensity, and one-touch manual full up and full down buttons make it easy to go down for hole-shot or up for running in a following sea or coming into the beach. An automatic tab retraction feature returns the tabs to the full up position whenever the boat's ignition is switched off, helping protect the tabs during storage and trailering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500956500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Electric or hydraulic trim tab systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285202050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with most existing electric or hydraulic trim tab systems; fully compatible with all Bennett trim tab systems and most other brands.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett Hydraulic Pro Auto Trim Tab Switch do?\u003c\/strong\u003e It is an all-in-one trim tab control system that combines automatic trim tab control, manual trim tab control, and trim tab position indication in a single space-saving keypad, automatically leveling the boat's pitch and roll as speed and sea conditions change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch work with a hydraulic trim tab system?\u003c\/strong\u003e Yes, the Bennett Hydraulic Pro Auto Trim Tab Switch (6BT500956500) can be added to most existing trim tab systems, whether electric or hydraulic, and is fully compatible with all Bennett systems and most others.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I still control the trim tabs manually with this switch?\u003c\/strong\u003e Yes. In addition to automatic control, the Bennett Hydraulic Pro switch allows full manual control at any time with the touch of a button, and includes one-touch manual full up and full down buttons for quick adjustments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the automatic leveling feature work?\u003c\/strong\u003e The Bennett Hydraulic Pro's AutoTrim Pro function automatically adjusts trim tab position to level the boat's pitch and roll as vessel speed, sea conditions, and weight distribution shift, and it can store two favorite automatic running attitudes in memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch show trim tab position?\u003c\/strong\u003e Yes, the switch is equipped with LED indicators with adjustable light intensity that show trim tab position, along with real-time indication of AutoTrim Pro adjustments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the trim tabs when the ignition is turned off?\u003c\/strong\u003e The Bennett Hydraulic Pro Auto Trim Tab Switch includes automatic tab retraction, which returns the trim tabs to the full up position whenever the boat's ignition is switched off, helping protect them during storage and trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the response time of the trim tab system be adjusted?\u003c\/strong\u003e Yes, the Bennett Hydraulic Pro switch offers OEM customizable response time so it can be configured to match engine power, hull type, actuator type, or trim tab size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett Hydraulic Pro Auto Trim Tab Switch weigh?\u003c\/strong\u003e The Bennett Hydraulic Pro Auto Trim Tab Switch, part number 6BT500956500, weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Bennett Hydraulic Pro Auto Trim Tab Switch?\u003c\/strong\u003e This switch is finished in beige.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of this trim tab switch complicated?\u003c\/strong\u003e No, Bennett describes installation of the Hydraulic Pro Auto Trim Tab Switch as simple and straightforward.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450306779,"sku":"BEN-AP000A1HA","price":761.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-AP000A1HA__44638.1722478465.500.750.jpg?v=1785163391"},{"product_id":"bennett-bolt-trim-tab-rocker-switch-black-control-part-6bt500174000","title":"Bennett BOLT Trim Tab Rocker Switch, Black Control, Part 6BT500174000","description":"\u003cp\u003eThe Bennett BOLT Trim Tab Rocker Switch (6BT500174000) is the control panel switch used to operate Bennett BOLT Electric Trim Tab actuators from the helm. It is ergonomically designed and water resistant, delivering a positive audible click each time the trim tabs are engaged so the operator gets clear tactile feedback without needing to glance down at the panel. A built-in lock-out feature prevents the operator from pressing both directions at the same time, protecting the actuator motors from conflicting commands.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the switch fits into any existing Bennett 2 1\/2 inch rocker switch hole, so it drops into a standard cutout without additional fabrication. As a bridge control, it comes wired with a 20 foot harness, making it a practical choice for boats that need a second helm station or a longer run to the panel. The housing is plastic and the switch face is finished in black for a clean instrument panel look.\u003c\/p\u003e\u003cp\u003eThis rocker switch is built to work with Bennett BOLT Electric Trim Tab controls, giving boat owners a durable, dependable way to trim their boat for the best ride, fuel efficiency, and visibility at speed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500174000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Rocker Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount, fits standard Bennett 2 1\/2 inch rocker switch hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 5 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600238\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Bennett BOLT Electric Trim Tab controls\u003c\/li\u003e\n\u003cli\u003eFits any existing Bennett 2 1\/2 inch rocker switch cutout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett 6BT500174000 rocker switch used for?\u003c\/strong\u003e It is the control switch used to operate Bennett BOLT Electric Trim Tab actuators from the helm, letting the operator raise or lower each trim tab with a rocker action.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch work with any trim tab brand?\u003c\/strong\u003e The 6BT500174000 rocker switch is built for Bennett BOLT Electric Trim Tab controls, not for other trim tab brands or systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire harness on this switch?\u003c\/strong\u003e Bennett includes a 20 foot wire harness with this bridge control, which is long enough to reach a second helm station or a longer run from the main panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cutout does the Bennett BOLT rocker switch need?\u003c\/strong\u003e The 6BT500174000 switch is designed to fit into any existing Bennett 2 1\/2 inch rocker switch hole, so no new cutout is needed if you already have a Bennett panel opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rocker switch water resistant?\u003c\/strong\u003e Yes, the Bennett BOLT rocker switch is water resistant and built to hold up in a marine helm environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Bennett BOLT rocker switch?\u003c\/strong\u003e Part number 6BT500174000 is finished in black to match a standard dark helm panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the switch housing made from?\u003c\/strong\u003e The housing and rocker face of the 6BT500174000 switch are made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch have a lock-out feature?\u003c\/strong\u003e Yes, a lock-out feature on this Bennett switch prevents the operator from pressing both trim directions at the same time, which protects the actuators from conflicting signals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the trim tabs are actually engaging when I press the switch?\u003c\/strong\u003e The Bennett BOLT rocker switch gives a positive audible click each time it is pressed, confirming the trim tab command has been engaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this rocker switch control?\u003c\/strong\u003e The Bennett 6BT500174000 rocker switch measures 6 x 5 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT rocker switch weigh?\u003c\/strong\u003e This switch weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be used for a second helm station?\u003c\/strong\u003e Yes, the 6BT500174000 is a bridge control switch that ships with a 20 foot wire harness, making it suitable for a second station installation.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450994907,"sku":"BEN-BRC4000","price":104.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BRC4000-BOLT-Trim-Tab-Rocker-Switch-wiring-harness-and-packaging__64623.1739460340.500.750.jpg?v=1785163395"},{"product_id":"bennett-es2000-euro-style-hydraulic-trim-tab-rocker-switch-black","title":"Bennett ES2000 Euro Style Hydraulic Trim Tab Rocker Switch, Black","description":"\u003cp\u003eThe Bennett ES2000 Euro Style Hydraulic Trim Tab Rocker Switch is a helm-mounted control for operating Bennett hydraulic trim tabs. It is ergonomically designed and water resistant, and it delivers a positive audible click each time the trim tabs are engaged so the operator gets clear tactile confirmation of tab movement. A lock-out feature prevents the switch from being pressed in opposite directions at the same time, protecting the hydraulic system from conflicting commands.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the ES2000 fits into any existing Bennett 2 1\/2-inch rocker switch hole, so it can be installed at the helm without cutting a new opening. It uses a rocker-style actuator with a normally open contact and a screw terminal connector, and it is rated to an IP54 level of protection against dust and water intrusion at the panel. The switch body is molded from durable plastic and finished in black to match most helm panels.\u003c\/p\u003e\u003cp\u003eThis is a single-station control. Boats with a second helm or bridge station that need an additional switch with a longer harness should use the Bennett ES2000A, which is a separate part number built for that application and includes 20 feet of wire harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ES2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285317051\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe ES2000 is designed to fit into any existing Bennett 2 1\/2-inch rocker switch hole, making it a direct fit for helm panels already cut for a Bennett rocker switch.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett ES2000 used for?\u003c\/strong\u003e The Bennett ES2000 is a Euro Style Hydraulic Trim Tab Rocker Switch that mounts at the helm and controls a boat's Bennett hydraulic trim tabs, giving a positive click each time the tabs are engaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the ES2000 fit my existing switch panel cutout?\u003c\/strong\u003e Yes. The ES2000 is built to fit into any existing Bennett 2 1\/2-inch rocker switch hole, so it installs without cutting a new opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ES2000 water resistant?\u003c\/strong\u003e The Bennett ES2000 is water resistant and carries an IP54 protection rating, guarding against dust and water at the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the ES2000 come in?\u003c\/strong\u003e This switch is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ES2000 rocker switch made from?\u003c\/strong\u003e The ES2000 switch body is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES2000 prevent both trim tab directions from being pressed at once?\u003c\/strong\u003e Yes, the Bennett ES2000 has a lock-out feature that prevents the operator from pressing the switch in opposite directions at the same time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does the ES2000 rocker have?\u003c\/strong\u003e The ES2000 rocker switch has 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the ES2000 and the ES2000A?\u003c\/strong\u003e The ES2000 is a single-station switch, while the ES2000A is a separate part number designed as a second-station control that includes 20 feet of wire harness for bridge applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical contact and connector does the ES2000 use?\u003c\/strong\u003e The Bennett ES2000 uses a normally open contact with a screw terminal connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett ES2000 weigh?\u003c\/strong\u003e The Bennett ES2000 Euro Style Rocker Switch weighs 0.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES2000 give feedback when the trim tabs are engaged?\u003c\/strong\u003e Yes, the switch provides a positive audible click each time the trim tabs are engaged, confirming operation to the driver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Bennett ES2000?\u003c\/strong\u003e The Bennett ES2000 Euro Style Hydraulic Trim Tab Rocker Switch carries UPC 666285317051.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451060443,"sku":"BEN-ES2000","price":100.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ES2000__63148.1737826897.500.750.jpg?v=1785163395"},{"product_id":"bennett-es2000a-euro-style-trim-tab-rocker-switch-second-station-bridge-control-with-20-ft-wire-harness","title":"Bennett ES2000A Euro Style Trim Tab Rocker Switch - Second Station Bridge Control with 20 ft Wire Harness","description":"\u003cp\u003eThe Bennett ES2000A Euro Style Trim Tab Rocker Switch is a second-station bridge control designed for boats with a helm on an upper deck or bridge, letting a second operator adjust hydraulic trim tabs from that station. It ships with a 20 foot wire harness so it can be run from the bridge back to the boat's existing Bennett trim tab wiring, and it installs into any existing Bennett 2 1\/2-inch rocker switch hole for a straightforward retrofit or upgrade.\u003c\/p\u003e\u003cp\u003eThe switch has an ergonomic, low-profile Euro-style rocker design that gives a positive, tactile click each time the trim tabs are engaged, so the operator gets clear physical feedback without needing to watch the tabs. A built-in lock-out feature prevents the operator from pressing the switch in opposite directions at the same time, protecting the hydraulic actuators from conflicting commands. The rocker body is water resistant, holding up to spray and wet conditions typical of a bridge or open helm station, and it is finished in a beige color to blend with common helm panel finishes.\u003c\/p\u003e\u003cp\u003eConstruction is plastic with nickel contacts and quick-connect terminals for a clean wiring installation, and the switch operates on a normally-open, 1-way circuit with a single rocker position. Because it fits the standard Bennett rocker switch cutout, it works alongside existing Bennett hydraulic trim tab systems without requiring a new panel hole.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ES2000A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285317150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Hole Size:\u003c\/strong\u003e 2 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Nickel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Quick-connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 14 x 14 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits any existing Bennett 2 1\/2-inch rocker switch hole\u003c\/li\u003e\n\u003cli\u003eWired for use as a second (bridge) station alongside an existing Bennett hydraulic trim tab control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett ES2000A rocker switch used for?\u003c\/strong\u003e The Bennett ES2000A is a second-station (bridge) rocker switch for controlling hydraulic trim tabs from an upper helm or bridge station, separate from the boat's main lower-station control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES2000A come with a wire harness?\u003c\/strong\u003e Yes, the ES2000A includes a 20 foot wire harness so it can be run from a bridge or second station back to the boat's existing Bennett trim tab wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size switch hole does the ES2000A fit?\u003c\/strong\u003e This switch fits into any existing Bennett 2 1\/2-inch rocker switch hole, so it drops into the standard Bennett cutout without needing a different-sized opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ES2000A waterproof?\u003c\/strong\u003e The ES2000A rocker switch has a water resistant design suited to exposed bridge and helm locations, carrying an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the ES2000 and the ES2000A?\u003c\/strong\u003e The ES2000 is the standard Euro Style trim tab rocker switch for a single (primary) station, while the ES2000A is the second-station version built for bridge applications and supplied with a 20 foot wire harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ES2000A switch made of?\u003c\/strong\u003e The Bennett ES2000A rocker switch body is made of plastic, with nickel switch contacts and quick-connect terminals for wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES2000A have a lock-out feature?\u003c\/strong\u003e Yes, the ES2000A has a lock-out feature that prevents the operator from pressing the rocker in opposite directions at the same time, protecting the trim tab actuators from conflicting signals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ES2000A give feedback when trim tabs are engaged?\u003c\/strong\u003e The ES2000A provides a positive audible and tactile click each time the trim tabs are engaged, so the operator knows the switch input has registered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Bennett ES2000A switch?\u003c\/strong\u003e The Bennett ES2000A rocker switch is finished in beige.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ES2000A rocker switch weigh?\u003c\/strong\u003e The Bennett ES2000A weighs 1.75 pounds as supplied with its 20 foot wire harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ES2000A easy to install?\u003c\/strong\u003e Yes, the ES2000A is designed for easy installation into an existing Bennett 2 1\/2-inch rocker switch hole using its included 20 foot wire harness and quick-connect terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of circuit does the ES2000A use?\u003c\/strong\u003e The ES2000A operates on a normally-open, 1-way circuit with a single rocker position.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451093211,"sku":"BEN-ES2000A","price":134.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ES2000__04933.1718945254.500.750.jpg?v=1785163395"},{"product_id":"bennett-obi9000-h-all-in-one-hydraulic-trim-tab-switch-with-position-indicator-leds","title":"Bennett OBI9000-H All-in-One Hydraulic Trim Tab Switch with Position Indicator LEDs","description":"\u003cp\u003eThe Bennett OBI9000-H All-in-One Hydraulic Trim Tab Switch is a stand-alone helm control built for hydraulic trim tab systems. Unlike controls that require a separate external control box, the OBI9000-H integrates all of its functionality directly into a single, space-saving keypad, simplifying both installation and the look of your helm. The keypad features convenient All Up and All Down buttons for quick, one-touch trim adjustments, along with trim tab position LEDs that let you see exactly where your tabs are at all times without guessing. An auto tab retraction feature automatically raises the trim tabs when the ignition is powered off, helping protect the tabs and simplifying your shutdown routine. The control is designed to accommodate both new trim tab installations and common retrofit installations, and it is compatible with other trim tab system brands, making it a practical upgrade or replacement option for existing hydraulic setups. The kit includes the helm control with a 3 foot cable, waterproof cables, and two upper hinge screw-on sensors, giving you what you need to connect the control to your hydraulic trim tab actuators. Its easy-to-install single lock nut design keeps mounting straightforward for DIY installers and marine technicians alike.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e OBI9000-H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600375\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Sensors:\u003c\/strong\u003e 2 upper hinge screw-on sensors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Single lock nut design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Compatible with other trim tab system brands\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett OBI9000-H All-in-One Hydraulic Trim Tab Switch do?\u003c\/strong\u003e The Bennett OBI9000-H is a stand-alone helm control for hydraulic trim tab systems, combining All Up and All Down buttons with position-indicator LEDs in a single space-saving keypad that requires no external control unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the OBI9000-H compatible with hydraulic or electric trim tab systems?\u003c\/strong\u003e The Bennett OBI9000-H is designed for hydraulic trim tab systems. It is also compatible with other trim tab system brands, making it suitable as a retrofit or replacement control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett OBI9000-H show trim tab position?\u003c\/strong\u003e Yes. Trim tab position LEDs on the OBI9000-H keypad always show where the trim tabs are positioned so you do not have to guess while underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch retract the tabs automatically?\u003c\/strong\u003e Yes, the OBI9000-H includes auto tab retraction, which raises the trim tabs when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bennett OBI9000-H kit?\u003c\/strong\u003e The OBI9000-H includes one helm control with a 3 foot cable, waterproof cables, and two upper hinge screw-on sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett OBI9000-H weigh?\u003c\/strong\u003e The Bennett OBI9000-H All-in-One Hydraulic Trim Tab Switch weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the OBI9000-H be used for a new trim tab installation or only a retrofit?\u003c\/strong\u003e The OBI9000-H is designed to accommodate both new trim tab installations and common retrofit installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bennett OBI9000-H mounted at the helm?\u003c\/strong\u003e It uses an easy-to-install single lock nut design, making it simple to mount into a helm panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the OBI9000-H require a separate control box?\u003c\/strong\u003e No. The OBI9000-H is an all-in-one unit, with all control functionality built directly into the keypad, so no external control unit is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Bennett OBI9000-H work with trim tab systems from other manufacturers?\u003c\/strong\u003e Yes, the Bennett OBI9000-H is compatible with other trim tab system brands in addition to Bennett hydraulic systems.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451289819,"sku":"BEN-OBI9000-H","price":462.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/OBI9000-H__32687.1722507910.500.750.jpg?v=1785163401"},{"product_id":"bennett-bolt-electric-trim-tab-switch-w-led-integrated-helm-control-908914091000","title":"Bennett BOLT Electric Trim Tab Switch w\/LED, Integrated Helm Control 908914091000","description":"\u003cp\u003eThe Bennett BOLT Electric Trim Tab Switch is an all-in-one integrated helm control built for electric trim tab systems. Unlike traditional setups that require a separate control box mounted elsewhere on the boat, this switch has its control electronics engineered directly into a single, compact keypad, so installation is simple and the helm stays clean and space-saving. Trim tab position LEDs built into the keypad let the operator see exactly where the tabs are set at a glance, taking the guesswork out of trim adjustment. An auto tab retraction feature automatically raises the tabs whenever the ignition is powered off, protecting the tabs and simplifying trailering or dockside shutdown. Operation is handled through simple, clearly marked All Up and All Down buttons for quick, intuitive control underway.\u003c\/p\u003e\u003cp\u003eThis helm control is designed for electric trim tab systems only, and it is also compatible with other trim tab system brands, making it a practical option for both new installations and retrofits on boats already running electric tabs. It comes complete with a 3 foot wire harness and waterproof plug-and-play connectors, along with a backing fastener, so it mounts and wires in without splicing into unfamiliar wiring. A drilling template is included with the installation instructions to guide helm panel cutouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 908914091000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285222904\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8.19 x 6.1 x 3.15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Waterproof plug-and-play connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Helm control, 3 foot wire harness, waterproof plug-and-play connectors, backing fastener\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Compatible with other electric trim tab system brands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e All Up \/ All Down buttons, trim tab position LEDs, auto tab retraction on ignition off\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett BOLT Electric Trim Tab Switch do?\u003c\/strong\u003e It operates an electric trim tab system from a single integrated helm control, with the control electronics built directly into the keypad rather than a separate external box. The Bennett BOLT switch (part number 908914091000) provides All Up and All Down buttons plus trim tab position LEDs from one compact unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch compatible with electric or hydraulic trim tab systems?\u003c\/strong\u003e This helm control is designed for electric trim tab systems only. It is also compatible with other trim tab system brands, so it can be used as a replacement or upgrade control on supported electric tab setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch show where the trim tabs are positioned?\u003c\/strong\u003e Yes, built-in trim tab position LEDs on the keypad show the operator exactly where the tabs are set at any time, without needing to look at the tabs themselves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the tabs retract automatically when the boat is shut off?\u003c\/strong\u003e Yes, the Bennett BOLT switch includes an auto tab retraction feature that raises the trim tabs whenever the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this helm control?\u003c\/strong\u003e The kit includes the helm control keypad, a 3 foot wire harness, waterproof plug-and-play connectors, and a backing fastener for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the included wiring?\u003c\/strong\u003e The unit ships with a 3 foot wire harness terminated in waterproof plug-and-play connectors for a straightforward helm installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing this switch require a separate control box?\u003c\/strong\u003e No. Unlike older two-piece systems, this is a stand-alone integrated helm control (908914091000) with the control electronics built into the keypad itself, so no external control unit is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a drilling template provided for mounting?\u003c\/strong\u003e Yes, a drilling template is included with the printed installation instructions to help lay out the helm panel cutout before mounting the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the physical dimensions of the switch?\u003c\/strong\u003e The Bennett BOLT helm control measures 8.19 x 6.1 x 3.15 inches and weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be used to upgrade an existing electric trim tab installation?\u003c\/strong\u003e Yes, because it is compatible with other electric trim tab system brands, it works well as a retrofit upgrade for boats that already have an electric tab system installed.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451322587,"sku":"BEN-OBI9000E","price":502.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/OBI9000-I__43444.1722384943.500.750.jpg?v=1785163401"},{"product_id":"bennett-12v-relay-module-for-trim-tab-systems-rm12","title":"Bennett 12V Relay Module for Trim Tab Systems (RM12)","description":"\u003cp\u003eThe Bennett 12V Relay Module (RM12) is designed to reduce voltage drop in electric trim tab systems that have longer wire runs between the helm control and the actuators. As wiring distance increases, voltage drop can slow tab response and reduce system performance; the Relay Module compensates for this by handling the higher-current switching closer to the actuators, keeping tab response consistent.\u003c\/p\u003e\u003cp\u003eFor boats running Bennett's older trim tab controls, the RT1000 and RS1000, the Relay Module also serves a second function as an Interrupter Relay. In this application it helps prevent a fuse from blowing if the Bow Down and Bow Up buttons are inadvertently pressed at the same time, protecting the wiring and control circuit from a short-duration electrical conflict.\u003c\/p\u003e\u003cp\u003eThe module is built for wired, boat-mount installation with copper contacts and normally-open contact operation, running on a 12 volt DC coil and switching circuit. It operates automatically once wired into the system and meets ABYC electrical standards, making it a straightforward add-on for boaters extending or upgrading an existing Bennett electric trim tab installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500529700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e RM12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Relay Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Switching Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Switching Voltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Boat Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e ABYC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 6.0 inches L x 4.0 inches W x 5.0 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285222362\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett RM12 Relay Module do?\u003c\/strong\u003e The Bennett RM12 12V Relay Module reduces voltage drop in electric trim tab systems that have longer wire runs, keeping tab response consistent between the helm control and the actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RM12 compatible with older Bennett trim tab controls?\u003c\/strong\u003e Yes. With the older Bennett RT1000 and RS1000 trim tab controls, the RM12 Relay Module also functions as an Interrupter Relay, helping prevent a fuse from blowing if Bow Down and Bow Up are pressed at the same time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Bennett RM12 run on?\u003c\/strong\u003e The RM12 operates on a 12 volt DC coil and switching circuit, with a minimum and maximum switching voltage of 12 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the RM12 Relay Module have?\u003c\/strong\u003e The Bennett RM12 has 3 terminals for wiring into the trim tab system's electrical circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the contacts made of on the RM12?\u003c\/strong\u003e Copper contacts are used in the Bennett RM12, configured as normally open, with automatic operation once wired in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bennett RM12 mounted?\u003c\/strong\u003e The RM12 is a boat-mount, wired relay module rather than a plug-and-play inline unit, so it is installed and wired directly into the boat's trim tab circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett RM12 weigh?\u003c\/strong\u003e The Bennett RM12 Relay Module weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the RM12?\u003c\/strong\u003e The Bennett RM12 Relay Module ships in a package measuring 6.0 inches long by 4.0 inches wide by 5.0 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RM12 meet any marine electrical standards?\u003c\/strong\u003e Yes, the Bennett RM12 Relay Module meets ABYC electrical specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to add a relay module to my trim tab system?\u003c\/strong\u003e A relay module like the Bennett RM12 is added when wire runs between the helm control and trim tab actuators are long enough to cause voltage drop, which can slow or weaken tab response without it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Bennett RM12 manufactured?\u003c\/strong\u003e The Bennett RM12 Relay Module's country of origin is the United States.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451355355,"sku":"BEN-RM12","price":95.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-RM12__08239.1722502805.500.750.jpg?v=1785163401"},{"product_id":"bobs-machine-305-340000-dual-steering-wheel-switch-for-trim-jackplate-control","title":"Bob's Machine 305-340000 Dual Steering Wheel Switch for Trim\/Jackplate Control","description":"\u003cp\u003eThe Bob's Machine 305-340000 is a dual steering wheel switch that puts trim or jackplate control right at the driver's fingertips. Mounted on the steering column, it lets the operator adjust trim without taking a hand off the wheel or looking away from the water ahead, which keeps attention on driving during maneuvers where trim adjustment matters most. The switch bolts to most existing trim and jackplate systems, including both mechanical and hydraulic setups, and all mounting hardware is included for a straightforward installation.\u003c\/p\u003e\u003cp\u003eElectrically, the 305-340000 uses normally open, ON-OFF push-button contacts wired through screw terminals on a 2-way circuit, with copper contacts rated for 3 watts. It is built with a black plastic housing measuring 18.5 x 4.75 x 2.5 inches and weighs 1.14 pounds. As a dual switch, it combines two switch actuators into one column-mounted unit, giving the operator a single console-friendly location for trim control.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 305-340000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push Button, Dual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 18.5 x 4.75 x 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 3 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 894721000575\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bob's Machine 305-340000 dual steering wheel switch control?\u003c\/strong\u003e This switch controls trim or jackplate movement and mounts on the steering column so the driver can adjust trim without taking a hand off the wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 305-340000 switch work with a hydraulic jackplate system?\u003c\/strong\u003e Yes, it bolts to most trim and jackplate systems, including both mechanical and hydraulic setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with this switch?\u003c\/strong\u003e All hardware needed to mount the Bob's Machine 305-340000 switch is included in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Bob's Machine 305-340000 switch?\u003c\/strong\u003e It measures 18.5 x 4.75 x 2.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 305-340000 switch weigh?\u003c\/strong\u003e The Bob's Machine 305-340000 dual steering wheel switch weighs 1.14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the switch housing made from?\u003c\/strong\u003e A black plastic housing is used for the Bob's Machine 305-340000 switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single switch or a dual switch?\u003c\/strong\u003e It is a dual switch, combining two switch actuators into one column-mounted unit for trim or jackplate control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical contacts does the 305-340000 use?\u003c\/strong\u003e Normally open, ON-OFF contacts wired through screw terminals on a 2-way circuit rated 3 watts, with copper contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the switch connect to existing wiring?\u003c\/strong\u003e Via screw terminals, which makes it straightforward to wire into an existing trim or jackplate circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Bob's Machine 305-340000 switch designed to mount?\u003c\/strong\u003e It is panel-mounted on the steering column console.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand and part number is this switch?\u003c\/strong\u003e It is a Bob's Machine switch, part number 305-340000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a UPC for the 305-340000 dual steering wheel switch?\u003c\/strong\u003e Yes, UPC 894721000575 identifies the Bob's Machine 305-340000 dual steering wheel switch.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027466199259,"sku":"BOB-305-340000","price":73.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71u2RhJdcjL_b6b22edb-07fe-4f3b-b3e2-7e4566609b30.jpg?v=1785331001"},{"product_id":"lenco-10222-211d-complete-double-rocker-trim-tab-switch-kit-carling-122-12-volt-deutsch-connectors","title":"Lenco 10222-211D Complete Double Rocker Trim Tab Switch Kit, Carling #122, 12 Volt Deutsch Connectors","description":"\u003cp\u003eThe Lenco 10222-211D Complete Double Rocker Trim Tab Switch Kit is a factory-ready control switch built for standard electric trim tab systems, letting the operator run port and starboard tabs independently from a single key pad. At the core of the kit is a Carling #122 double rocker switch, a two-position ON-OFF design rated for 1 Amp at 12 Volts with make-before-break contacts and brass switch contacts for reliable current transfer. The switch connects through sealed Deutsch connectors on a 36 inch power pigtail, simplifying wiring at the helm and protecting the connection from moisture. The overall key pad measures 2.75 inches by 2.75 inches and is designed to drop into a 2.25 inch cut-out, matching the standard mounting footprint used across Lenco trim tab helm stations. The switch body is a plastic housing rated IP54 and built for surface mounting, with an 85 degree Celsius upper temperature rating for use in tight helm consoles. Control is push-button style with parallel circuit operation, and the kit ships with the installation hardware needed to mount the key pad. Because it is designed for use with standard trim tab systems, this kit is a straightforward way to add or replace the primary switch on a Lenco electric trim tab installation without sourcing individual components separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10222-211D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Model:\u003c\/strong\u003e Carling #122 Double Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Deutsch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Pigtail Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Key Pad Size:\u003c\/strong\u003e 2.75 x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Pad Hole Cut-Out Size:\u003c\/strong\u003e 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e ON-OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 1 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Make-before-break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e Parallel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Type:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 85 Degrees Celsius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847005289\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hardware:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with standard electric trim tab systems.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 10222-211D switch kit used for?\u003c\/strong\u003e The Lenco 10222-211D Complete Double Rocker Trim Tab Switch Kit controls a standard electric trim tab system, letting the operator adjust port and starboard tabs from one key pad at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a single or double switch?\u003c\/strong\u003e It is a double rocker switch, built around a Carling #122 double rocker unit so both trim tab actuators can be operated from a single key pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does the 10222-211D use?\u003c\/strong\u003e This kit uses sealed Deutsch connectors on a 36 inch power pigtail, which keeps the wiring connection protected from moisture at the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cut-out do I need to install this switch?\u003c\/strong\u003e The overall key pad measures 2.75 inches by 2.75 inches and mounts into a 2.25 inch hole cut-out on the 10222-211D switch kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and amperage is the switch rated for?\u003c\/strong\u003e The Lenco 10222-211D switch is rated for 12 Volts at 1 Amp, with make-before-break contacts and brass contact material for reliable current transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation hardware included with this kit?\u003c\/strong\u003e Yes, the 10222-211D Complete Double Rocker Trim Tab Switch Kit ships with the installation hardware needed to mount the key pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the switch housing made of?\u003c\/strong\u003e The switch housing on the 10222-211D is plastic, rated IP54 and built for surface mounting in a helm console.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch work with any trim tab system?\u003c\/strong\u003e The 10222-211D is designed for use with standard electric trim tab systems, making it suited for typical Lenco trim tab installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of control does the switch use?\u003c\/strong\u003e Control is push-button style with an ON-OFF operation mode across 2 positions, wired in a parallel circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the 10222-211D handle?\u003c\/strong\u003e The switch carries an 85 degree Celsius upper temperature rating, suitable for enclosed helm console installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the switch kit weigh?\u003c\/strong\u003e The Lenco 10222-211D Complete Double Rocker Trim Tab Switch Kit weighs 0.6 pounds.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994484955,"sku":"LEN-10222-211","price":104.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LEN-10222-211_lg__04886.1660321615.500.750.jpg?v=1785164588"},{"product_id":"lenco-20-flybridge-second-station-led-trim-tab-switch-kit-for-15270-001-15271-001-systems","title":"Lenco 20' Flybridge Second Station LED Trim Tab Switch Kit for 15270-001\/15271-001 Systems","description":"\u003cp\u003eThe Lenco 20' Flybridge Second Station LED Trim Tab Switch Kit (part number 11941-002) lets you add a second trim tab control station at the flybridge of your boat. It is built to connect to Lenco's LED Indicator Integrated Tactile Switch Kit (part# 15270-001 and\/or 15271-001), giving you full trim tab control from a second location without replacing your primary helm switch. The kit plugs directly into the existing harness of the Integrated Tactile Switch, so the second station key pad becomes an extension of the system already installed at the lower helm.\u003c\/p\u003e\u003cp\u003eThis kit works with 12 and 24-Volt electrical systems and is compatible with both single and dual actuator trim tab setups, making it a fit for a range of boat configurations already running Lenco's integrated tactile switch platform. The included 20-foot shielded harness runs the wiring from the primary station to the flybridge, and the Y-connector allows the second station to tie into the existing circuit without cutting or splicing the original harness. The key pad itself uses a push-button, touch-control design with quick-connect terminals for a clean, tool-light installation.\u003c\/p\u003e\u003cp\u003eHoused in a plastic enclosure, the second station key pad carries an IP67 ingress protection rating, suited to the wet and exposed conditions of a flybridge. It uses flush mounting for a low-profile finish at the helm and is wired, not wireless, for a stable and consistent connection to the trim tab actuators. This kit is intended for boats that already have the Lenco LED Indicator Integrated Tactile Switch Kit installed at a primary station and need trim tab control added at a second helm position.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11941-002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Lenco LED Indicator Integrated Tactile Switch Kit (part# 15270-001 and\/or 15271-001)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 and 24 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator System Compatibility:\u003c\/strong\u003e Single and Dual Actuator Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e 20-foot Shielded Harness, Y-Connector, Second Station Key Pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 20 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage (Key Pad):\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Quick-connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 13 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Touch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Vehicle Type:\u003c\/strong\u003e Boat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847007528\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 11941-002 kit do?\u003c\/strong\u003e The Lenco 20' Flybridge Second Station LED Trim Tab Switch Kit (part number 11941-002) adds a second trim tab control station, typically at the flybridge, so the boat's trim tabs can be operated from a second location in addition to the primary helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat switch system does the 11941-002 second station kit work with?\u003c\/strong\u003e This kit is designed to connect to the Lenco LED Indicator Integrated Tactile Switch Kit, part number 15270-001 and\/or 15271-001, by plugging into the existing harness of that switch system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 11941-002 kit include the primary trim tab switch?\u003c\/strong\u003e No. The 11941-002 kit is a second station add-on only; it requires that a Lenco LED Indicator Integrated Tactile Switch Kit (15270-001 and\/or 15271-001) is already installed as the primary station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this Lenco kit?\u003c\/strong\u003e The Lenco 20' Flybridge Second Station LED Trim Tab Switch Kit includes a 20-foot shielded harness, a Y-connector, and the second station key pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit compatible with 12-volt and 24-volt boats?\u003c\/strong\u003e Yes, the 11941-002 second station kit is built for both 12-Volt and 24-Volt electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work with a dual actuator trim tab setup?\u003c\/strong\u003e Yes. The Lenco 11941-002 kit is compatible with both single and dual actuator trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wiring harness on this kit?\u003c\/strong\u003e The kit includes a 20-foot shielded harness to run wiring from the primary switch station to the second station location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the second station key pad?\u003c\/strong\u003e The second station key pad included in the 11941-002 kit measures 13 x 7 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the key pad made from and how durable is it in wet conditions?\u003c\/strong\u003e The key pad housing is made of plastic and carries an IP67 ingress protection rating, making it suited to the wet, exposed environment of a flybridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the second station key pad mounted?\u003c\/strong\u003e The 11941-002 key pad uses a flush mounting design and connects using quick-connect terminals for installation at the second station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing this kit require cutting into the existing switch wiring?\u003c\/strong\u003e No. The included Y-connector allows the second station key pad to tie into the existing Integrated Tactile Switch harness (part# 15270-001 and\/or 15271-001) without cutting or splicing the original wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 11941-002 key pad a wireless remote?\u003c\/strong\u003e No, the second station key pad in this Lenco kit is a wired accessory connected through the included 20-foot shielded harness, not a wireless remote.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994550491,"sku":"LEN-11941-002","price":261.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Lenco-20-foot-Flybridge-Second-Station-LED-Trim-Tab-Switch-Kit__52045.1739460624.500.750.jpg?v=1785164589"},{"product_id":"lenco-20-flybridge-second-station-kit-standard-key-pad-for-15169-001-integrated-tactile-switch-12-24-volt","title":"Lenco 20' Flybridge Second Station Kit, Standard Key Pad for 15169-001 Integrated Tactile Switch, 12\/24-Volt","description":"\u003cp\u003eThe Lenco 20' Flybridge Second Station Kit (part number 11841-102) adds a second station Standard Key Pad to a Lenco All-in-One Integrated Tactile Switch Kit, part number 15169-001. It is designed for boats that need trim tab control from a second helm position, such as a flybridge, in addition to the primary station. The key pad connects by plugging into the existing wiring harness from the 15169-001 switch, so no separate wiring configuration is required at installation. The kit is built for 12-Volt and 24-Volt single actuator trim tab systems, making it suited to boats running one actuator per trim tab. The included key pad uses a push-button tactile control layout with 2 switch positions, a normally open contact design, and copper and brass contact materials for reliable electrical connection. It has a flush mount design finished in black plastic, measures 14 x 7 x 5 inches, and carries an IP67 ingress protection rating along with a 176 degree Fahrenheit upper temperature rating, supporting use in a marine helm environment. The kit is rated for 20 Amps and uses a wire lead connector type. In the box is a 20-foot harness and the second station key pad itself, ready to extend control of an existing 15169-001 Integrated Tactile Switch Kit to a second station.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11841-102\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch (Second Station Kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Lenco 15169-001 Integrated Tactile Switch Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 and 24 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Single Actuator Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e 20-foot harness, second station key pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 20 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Wire Lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Method:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Flush Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper, Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 14 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 176 Degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847007474\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis kit is designed for use with the Lenco 15169-001 All-in-One Integrated Tactile Switch Kit, adding a second station Standard Key Pad by connecting into its existing harness.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 11841-102 Second Station Kit do?\u003c\/strong\u003e The Lenco 11841-102 is a 20-foot Flybridge Second Station Kit that adds a second Standard Key Pad so trim tabs can be controlled from a second helm position, such as a flybridge, in addition to the main station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat switch system does this kit work with?\u003c\/strong\u003e This second station kit is designed to connect to a Lenco 15169-001 All-in-One Integrated Tactile Switch Kit by plugging into its existing wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to run new wiring to install the second station key pad?\u003c\/strong\u003e No. The 11841-102 kit plugs into the existing harness from the 15169-001 Integrated Tactile Switch Kit, so no separate wiring configuration is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 11841-102?\u003c\/strong\u003e The kit includes a 20-foot harness and the second station key pad itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit compatible with 24-Volt systems?\u003c\/strong\u003e Yes, the Lenco 11841-102 second station kit is built for both 12-Volt and 24-Volt single actuator trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit work with dual actuator systems?\u003c\/strong\u003e The 11841-102 is specified for single actuator systems, not dual actuator setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the harness on this second station kit?\u003c\/strong\u003e The harness supplied with the 11841-102 second station kit is 20 feet long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the key pad made from and what color is it?\u003c\/strong\u003e The second station key pad is made from black plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the key pad mounted and how many switch positions does it have?\u003c\/strong\u003e The key pad uses a flush mount design and has 2 switch positions operated by push button control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the 11841-102 kit?\u003c\/strong\u003e The Lenco 11841-102 measures 14 x 7 x 5 inches and weighs 1.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the key pad water resistant for marine use?\u003c\/strong\u003e Yes, the key pad carries an IP67 ingress protection rating and an upper temperature rating of 176 degrees Fahrenheit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the current rating of this switch kit?\u003c\/strong\u003e The 11841-102 second station kit is rated for 20 Amps with a normally open contact design and a wire lead connector.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027994616027,"sku":"LEN-11841-102","price":166.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/11841-102__91864.1725894254.500.750.jpg?v=1785164588"},{"product_id":"lenco-15169-001-standard-integrated-trim-tab-switch-kit-single-actuator-12-24-volt","title":"Lenco 15169-001 Standard Integrated Trim Tab Switch Kit, Single Actuator, 12\/24-Volt","description":"\u003cp\u003eThe Lenco 15169-001 Standard Integrated Trim Tab Switch Kit completes a single-actuator Lenco trim tab system with a maintenance-free, all-in-one tactile switch. Rather than running a separate control box, this switch integrates that functionality directly into the keypad bezel, giving you a low-profile, self-contained control point at the helm. It is built for both 12-volt and 24-volt single actuator systems.\u003c\/p\u003e\u003cp\u003eInstallation is designed to be straightforward: the switch uses waterproof, plug-and-play Deutsch connectors so there is no splicing or soldering required at the keypad end. A 36 inch power pigtail and a 30 inch wiring harness (measured from the back of the switch bezel) give you room to route wiring to the helm console. The keypad itself measures 2.75 inches by 2.75 inches overall and mounts through a 2-1\/16 inch hole cut-out, with 4.08 inches of clearance needed behind the mounting location for the connectors and harness.\u003c\/p\u003e\u003cp\u003eFunctionally, the switch delivers instant response to keypad input so you can make quick trim adjustments as sea conditions change, and it includes a built-in retractor for returning the tabs to a neutral position. The low-profile design keeps the helm panel clean while still giving tactile, dependable control over a single Lenco trim tab actuator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15169-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Actuator Systems:\u003c\/strong\u003e Single Actuator Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12-Volt and 24-Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeypad Size:\u003c\/strong\u003e 2.75 inches x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Cut-Out Size:\u003c\/strong\u003e 2-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Pigtail Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Harness Length:\u003c\/strong\u003e 30 inches (measured from the back of the switch bezel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Clearance:\u003c\/strong\u003e 4.08 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Waterproof Deutsch connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847007566\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15169-001 Standard Integrated Trim Tab Switch Kit do?\u003c\/strong\u003e The Lenco 15169-001 Standard Integrated Trim Tab Switch Kit controls a single Lenco trim tab actuator system, providing quick tab adjustments from a compact, all-in-one keypad switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch compatible with 12-volt or 24-volt boats?\u003c\/strong\u003e The 15169-001 switch works on both 12-volt and 24-volt single actuator systems, so it covers either electrical setup as long as your trim tab system is a single actuator configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15169-001 work with dual trim tab actuator setups?\u003c\/strong\u003e No. The Lenco 15169-001 is built for single actuator systems only; a boat running dual actuators needs a dual-system switch instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to cut for this switch?\u003c\/strong\u003e The Lenco 15169-001 mounts through a 2-1\/16 inch hole cut-out, with an overall keypad face measuring 2.75 inches by 2.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much clearance is needed behind the panel to install this switch?\u003c\/strong\u003e You need 4.08 inches of clearance behind the mounting location for the Lenco 15169-001's connectors and wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring and power leads on this trim tab switch?\u003c\/strong\u003e The 15169-001 has a 36 inch power pigtail and a 30 inch wiring harness, measured from the back of the switch bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of electrical connectors does the 15169-001 use?\u003c\/strong\u003e This switch uses waterproof, plug-and-play Deutsch connectors, so wiring connections snap together without splicing or soldering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch include a control box?\u003c\/strong\u003e No separate control box is needed. The Lenco 15169-001 integrates the control box functionality directly into the keypad bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Lenco 15169-001 and the LED version of this switch?\u003c\/strong\u003e The 15169-001 is the standard integrated switch without indicator lights, while the LED Integrated Trim Tab Switch Kit (15170-001) adds two high-intensity LED position indicators, a backlit keypad, and a photo eye that adjusts indicator brightness for different lighting conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 15169-001 have a built-in retractor?\u003c\/strong\u003e Yes, the Lenco 15169-001 includes a built-in retractor as part of its keypad functionality, along with instant response to keypad input.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 15169-001 switch waterproof?\u003c\/strong\u003e The switch connects using waterproof Deutsch connectors, which are designed for plug-and-play installation in a marine environment.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027995959515,"sku":"LEN-15169-001","price":240.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/15169-001__45380.1558190639.500.750.jpg?v=1785164607"},{"product_id":"lenco-15170-001-led-integrated-trim-tab-switch-kit-single-actuator-12-24-volt","title":"Lenco 15170-001 LED Integrated Trim Tab Switch Kit - Single Actuator, 12\/24-Volt","description":"\u003cp\u003eThe Lenco 15170-001 LED Integrated Trim Tab Switch Kit is a maintenance-free, all-in-one tactile switch designed to control single actuator trim tab systems on 12-volt and 24-volt boats. Unlike a separate control box and keypad, this switch integrates the control box functionality directly into the keypad bezel, giving you one compact, self-contained unit to mount at the helm. Two high-intensity LED indicators show the exact position of your trim tabs at all times, so you always know your trim setting without guessing. A backlit keypad automatically illuminates the graphics for easier viewing at night, while a built-in photo eye reads ambient light and adjusts indicator intensity for optimum visibility in any lighting condition. A self-check feature is also built in to help confirm proper operation.\u003c\/p\u003e\u003cp\u003eInstallation is simple thanks to waterproof, plug-and-play Deutsch connectors, a 36 inch power pigtail, and a 30 inch wiring harness measured from the back of the switch bezel, so wiring reaches typical helm locations without splicing. The low-profile keypad measures 2.75 inches by 2.75 inches overall, requires a 2-1\/16 inch hole cut-out, and needs 4.08 inches of clearance behind the mounting location for the connectors and harness. A built-in retractor delivers instant response for quick trim adjustments as conditions change. This switch is backed by a 3 year manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15170-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Single Actuator Systems, 12-Volt and 24-Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeypad Size:\u003c\/strong\u003e 2.75 inches x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Cut-Out Size:\u003c\/strong\u003e 2-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Clearance:\u003c\/strong\u003e 4.08 inches from the back of the keypad mounting location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Harness Length:\u003c\/strong\u003e 30 inches, measured from the back of the switch bezel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Pigtail Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Waterproof, plug-and-play Deutsch connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 10 x 5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for 12-volt and 24-volt single actuator trim tab systems. Confirm your current trim tab setup uses a single actuator before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15170-001 LED Integrated Trim Tab Switch Kit do?\u003c\/strong\u003e It provides control for a single actuator trim tab system while also displaying trim tab position through two built-in LED indicators, combining the control box and keypad into one integrated switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 15170-001 compatible with both 12-volt and 24-volt systems?\u003c\/strong\u003e Yes, the 15170-001 is built for 12-volt and 24-volt single actuator trim tab systems. Review your current trim tab setup before ordering to confirm it uses a single actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do the LED indicators on this trim tab switch work?\u003c\/strong\u003e Two high-intensity LED indicators on the Lenco 15170-001 show the exact position of the trim tabs at all times, and a photo eye adjusts indicator intensity based on ambient light for clear viewing in any condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch work at night?\u003c\/strong\u003e The keypad on the 15170-001 is backlit and automatically illuminates its graphics for night viewing, and the photo eye further adjusts brightness as ambient light changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to cut to install the 15170-001?\u003c\/strong\u003e A 2-1\/16 inch hole cut-out is required for the Lenco 15170-001 keypad, with an overall keypad footprint of 2.75 inches by 2.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much mounting clearance does the Lenco 15170-001 need behind the panel?\u003c\/strong\u003e 4.08 inches of clearance is required from the back of the keypad's mounting location to accommodate the connectors and wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harness and power pigtail on this switch?\u003c\/strong\u003e The 15170-001 has a 30 inch wiring harness measured from the back of the switch bezel and a 36 inch power pigtail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connectors does the Lenco 15170-001 use?\u003c\/strong\u003e This switch uses waterproof, plug-and-play Deutsch connectors, which simplify installation without additional splicing or sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Lenco 15170-001 switch made from?\u003c\/strong\u003e The keypad housing on the 15170-001 is made from plastic and carries an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 15170-001 the single or dual actuator version?\u003c\/strong\u003e The 15170-001 is the single actuator version of Lenco's LED Integrated Trim Tab Switch Kit; the dual actuator version is a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15170-001 include a warranty?\u003c\/strong\u003e Yes, the Lenco 15170-001 LED Integrated Trim Tab Switch Kit is backed by a 3 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 15170-001 trim tab switch weigh?\u003c\/strong\u003e The Lenco 15170-001 weighs 1.3 pounds.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027996090587,"sku":"LEN-15170-001","price":407.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/15170-001__58895.1725651645.500.750.jpg?v=1785164608"},{"product_id":"lenco-15171-001-led-integrated-trim-tab-switch-kit-dual-actuator-12-volt","title":"Lenco 15171-001 LED Integrated Trim Tab Switch Kit, Dual Actuator, 12 Volt","description":"\u003cp\u003eThe Lenco LED Integrated Trim Tab Switch Kit (part number 15171-001) is an all-in-one tactile switch designed for dual actuator trim tab systems. Unlike older two-piece setups, this switch integrates the control box functionality directly into the keypad bezel, eliminating a separate control box and simplifying installation to a plug and play process using waterproof Deutsch connectors. Two high-intensity LED indicators show the exact position of both trim tabs at all times, so the operator always knows tab position without guessing. A backlit keypad automatically illuminates the graphics for night operation, while a built-in photo eye reads ambient light and adjusts indicator brightness for optimal visibility in any lighting condition. The switch operates on 12 Volts DC, carries a 5 Amp current rating, and uses a normally-open push button design with a pivot mount and a 2-way circuit. It is rated IP54 for protection against water and dust intrusion and is rated for use up to 140 degrees Fahrenheit. The keypad measures 2.75 inches by 2.75 inches overall with a 2-1\/16 inch hole cut-out, requires 4.08 inches of clearance behind the mounting location, and includes a 30 inch wiring harness plus a 36 inch power pigtail for connection to the boat's trim tab system. The switch is built with a durable plastic housing and brass and copper contacts, and it includes a built-in retractor for a low profile finished look at the helm. It is backed by a 3 year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 15171-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Dual actuator trim tab systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 5 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Plug In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Pivot Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Temperature Rating:\u003c\/strong\u003e 140 Degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Brass, Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Keypad Size:\u003c\/strong\u003e 2.75 inches x 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Cut-out Size:\u003c\/strong\u003e 2-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Clearance:\u003c\/strong\u003e 4.08 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Harness Length:\u003c\/strong\u003e 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Pigtail Length:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847007580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 Year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for boats equipped with dual actuator Lenco trim tab systems. Confirm your current trim tab setup uses dual actuators before ordering.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Lenco 15171-001 LED Integrated Trim Tab Switch Kit do?\u003c\/strong\u003e The Lenco 15171-001 provides control for dual actuator trim tab systems while also displaying trim tab position through built-in LED indicators, with the control box functionality integrated directly into the keypad bezel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch for single or dual trim tab systems?\u003c\/strong\u003e The Lenco 15171-001 is built specifically for dual actuator trim tab systems, controlling both trim tabs from one keypad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Lenco 15171-001 trim tab switch run on?\u003c\/strong\u003e This switch operates on 12 Volts DC and carries a 5 Amp current rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is trim tab position shown on this switch?\u003c\/strong\u003e Two high-intensity LED indicators on the Lenco 15171-001 keypad show the exact position of both trim tabs at all times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the switch be seen and used at night?\u003c\/strong\u003e Yes, the keypad is backlit for night viewing, and a built-in photo eye reads ambient light and adjusts indicator brightness for optimal visibility in any lighting condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting hole size for the Lenco 15171-001?\u003c\/strong\u003e The hole cut-out size is 2-1\/16 inches, with an overall keypad size of 2.75 inches by 2.75 inches and 4.08 inches of clearance required behind the mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wiring on this trim tab switch?\u003c\/strong\u003e The Lenco 15171-001 includes a 30 inch wiring harness measured from the back of the switch bezel plus a 36 inch power pigtail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult for this switch?\u003c\/strong\u003e No, the Lenco 15171-001 uses a self-contained low-profile keypad with waterproof plug and play Deutsch connectors and a built-in retractor, making installation straightforward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the switch housing made of?\u003c\/strong\u003e The Lenco 15171-001 keypad housing is made of plastic, with brass and copper switch contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab switch weigh?\u003c\/strong\u003e The Lenco 15171-001 weighs 1.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch water resistant?\u003c\/strong\u003e Yes, the Lenco 15171-001 uses waterproof Deutsch connectors and carries an IP54 protection rating against water and dust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Lenco 15171-001 come with a warranty?\u003c\/strong\u003e Yes, this trim tab switch is backed by a 3 year manufacturer's warranty.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027996123355,"sku":"LEN-15171-001","price":547.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/LEN-15171-001__41273.1725891346.500.750.jpg?v=1785164607"},{"product_id":"lenco-marine-trim-tab-keypad-extension-harness-10-feet-fits-123sc-and-124ssr-keypads-30097-001","title":"Lenco Marine Trim Tab Keypad Extension Harness, 10 Feet, Fits 123SC and 124SSR Keypads - 30097-001","description":"\u003cp\u003eThe Lenco Marine Trim Tab Keypad Extension Harness extends the wiring run between a Lenco trim tab keypad and its control system, giving installers the extra length needed to route the keypad connection through longer helm runs or around obstructions in the dash. This 10 foot harness is built specifically for the Lenco 123SC and 124SSR trim tab keypads, allowing the keypad to be mounted farther from the control box or wiring junction without splicing or modifying the factory cable.\u003c\/p\u003e\u003cp\u003eThe harness uses overmolded construction, which protects the wiring and connector joints from moisture, vibration, and physical wear in the marine environment. Because it is designed as a direct extension for the 123SC and 124SSR keypads, it maintains a straightforward connection without the need for additional adapters, simplifying installation for boat owners and installers upgrading or repositioning their trim tab keypad.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 30097-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Keypads:\u003c\/strong\u003e 123SC, 124SSR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Overmolded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847004145\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLenco 123SC trim tab keypad\u003c\/li\u003e\n\u003cli\u003eLenco 124SSR trim tab keypad\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco Trim Tab Keypad Extension Harness 30097-001 used for?\u003c\/strong\u003e It extends the wiring connection for a Lenco 123SC or 124SSR trim tab keypad, adding 10 feet of cable length so the keypad can be mounted farther from the control box or wiring junction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich trim tab keypads does the 30097-001 extension harness fit?\u003c\/strong\u003e This harness is designed for the Lenco 123SC and 124SSR trim tab keypads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Lenco 30097-001 extension harness?\u003c\/strong\u003e The harness measures 10 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 30097-001 harness work with any other keypad models?\u003c\/strong\u003e The Lenco 30097-001 extension harness is built specifically for the 123SC and 124SSR keypads; compatibility with other keypad models is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the harness construction, and is it suitable for marine use?\u003c\/strong\u003e The 30097-001 uses overmolded construction, which shields the wiring and connections from moisture and vibration typical of a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco Trim Tab Keypad Extension Harness weigh?\u003c\/strong\u003e It weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of the 30097-001 extension harness straightforward?\u003c\/strong\u003e Yes, since it is a direct extension harness for the 123SC or 124SSR keypad, it connects in line with the existing keypad wiring without requiring additional adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Lenco 30097-001 harness?\u003c\/strong\u003e The product is the 10 foot overmolded extension harness itself, part number 30097-001, for connecting to a Lenco 123SC or 124SSR trim tab keypad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Lenco Marine part?\u003c\/strong\u003e Yes, the 30097-001 is a genuine Lenco Marine trim tab keypad extension harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Lenco Trim Tab Keypad Extension Harness?\u003c\/strong\u003e The UPC for part number 30097-001 is 874847004145.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49027996221659,"sku":"LEN-30097-001","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/len-30097-001_large__96198.1558176183.500.750.jpg?v=1785164607"},{"product_id":"lenco-marine-actuator-extension-harness-14-foot-16-awg-part-30133-002d","title":"Lenco Marine Actuator Extension Harness, 14 Foot, 16 AWG, Part 30133-002D","description":"\u003cp\u003eThe Lenco Marine Actuator Extension Harness (Part 30133-002D) is a 14 foot, 16 AWG copper wiring harness built to extend the connection between a Lenco trim tab actuator and its control module or switch panel. It is designed for boats where the factory-length cable does not reach, such as larger vessels or installations that route the actuator and helm control farther apart than a standard run allows.\u003c\/p\u003e\u003cp\u003eThe harness uses 16 gauge copper conductors paired with corrosion-resistant connectors, giving it the durability needed for a marine electrical environment where moisture and salt exposure are constant concerns. The 14 foot length gives installers flexibility in routing the cable through the hull, bilge, or console while keeping the run clean and manageable rather than forcing a cramped, makeshift extension.\u003c\/p\u003e\u003cp\u003eThis harness is intended as a direct extension for Lenco trim tab actuator wiring, making it a straightforward upgrade or replacement when rerouting a system, relocating a switch panel, or completing a new trim tab installation that requires additional cable length.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 30133-002D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Actuator Extension Harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 14 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 16 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 5 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003988\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Items:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Lenco 30133-002D harness used for?\u003c\/strong\u003e It is an actuator extension harness that lengthens the wiring run between a Lenco trim tab actuator and the control module or switch panel, useful when the factory cable does not reach the desired mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this extension harness?\u003c\/strong\u003e The 30133-002D harness measures 14 feet in length, giving enough extra cable to route through longer bilge or console runs on larger boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge does the harness use?\u003c\/strong\u003e It is built with 16 AWG copper wire, sized to carry the actuator's power and signal reliably over the full 14 foot run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the conductors made of?\u003c\/strong\u003e The conductors in the Lenco 30133-002D harness are copper, paired with corrosion-resistant connectors suited to a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this harness work with any Lenco trim tab actuator?\u003c\/strong\u003e The 30133-002D is designed as an extension cable for Lenco trim tab actuator wiring, connecting the actuator to the control module or switch panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the harness weigh?\u003c\/strong\u003e The Lenco 30133-002D actuator extension harness weighs 0.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the harness?\u003c\/strong\u003e The 30133-002D ships in packaging measuring 8 x 5 x 3 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many harnesses are included?\u003c\/strong\u003e Each 30133-002D package contains one actuator extension harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Lenco part?\u003c\/strong\u003e Yes, the 30133-002D is a genuine Lenco Marine actuator extension harness, not a generic aftermarket cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an extension harness instead of the standard cable?\u003c\/strong\u003e An extension harness like the 30133-002D is needed when the actuator and control module or switch panel are farther apart than the factory wiring allows, such as on larger boats or relocated helm stations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the connectors weatherproof?\u003c\/strong\u003e The 30133-002D uses corrosion-resistant connectors designed to hold up in the wet, salt-exposed conditions typical of marine installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this harness?\u003c\/strong\u003e The Lenco 30133-002D actuator extension harness has UPC 874847003988.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49031285539035,"sku":"LEN-30133-002D","price":35.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61g6gt44jrL.jpg?v=1785212606"},{"product_id":"lenco-marine-trim-tab-actuator-extension-harness-20-foot-14-gauge-cable-part-30133-103d","title":"Lenco Marine Trim Tab Actuator Extension Harness, 20 Foot 14 Gauge Cable, Part 30133-103D","description":"\u003cp\u003eThe Lenco Marine Actuator Extension Harness (part number 30133-103D) is a 20 foot, 14 gauge extension cable built to run power from a Lenco trim tab helm or control unit out to the actuator when the factory-length wiring will not reach. The harness uses a copper core conductor with PVC insulation for reliable current flow and protection against moisture and abrasion in the bilge or transom area, and it terminates in a DT connector for a secure, weatherproof plug-in connection to compatible Lenco actuator wiring. At 0.06 inches in wire diameter, the cable is sized to handle actuator current draw over the full 20 foot run without a bulky gauge upgrade.\u003c\/p\u003e\u003cp\u003eThis harness is intended as a straightforward extension for boats where the trim tab actuators sit farther from the helm or control box than the stock cable allows, letting installers avoid splicing and add-on connectors. It ships as a single 20 foot cable, ready to connect between the existing Lenco wiring and the actuator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 30133-103D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Actuator Extension Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 14 GA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter:\u003c\/strong\u003e 0.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e DT Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper (core), PVC (insulation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaged Dimensions:\u003c\/strong\u003e 9 x 12 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.78 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847003995\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit Count:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with compatible Lenco Marine trim tab actuator wiring systems using a DT connector.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Lenco 30133-103D actuator extension harness?\u003c\/strong\u003e The 30133-103D harness measures 20 feet in length, giving enough extra cable to route power from the helm or control unit to a trim tab actuator that sits beyond the reach of the factory wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge wire does this Lenco extension cable use?\u003c\/strong\u003e It is built with 14 gauge (14 GA) wire, measuring 0.06 inches in wire diameter, sized to carry actuator current over the full 20 foot length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector is on the Lenco 30133-103D harness?\u003c\/strong\u003e This harness terminates in a DT connector, which plugs into compatible Lenco Marine trim tab actuator wiring for a secure connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the actuator extension cable made from?\u003c\/strong\u003e The cable uses a copper core conductor with PVC insulation, a combination chosen for good conductivity along with resistance to moisture and abrasion in a boat's bilge or transom area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill part number 30133-103D work with any trim tab system?\u003c\/strong\u003e The 30133-103D extension harness is built for Lenco Marine trim tab actuator wiring that uses a matching DT connector; it is not a universal cable for other brands' systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 30133-103D cable weigh?\u003c\/strong\u003e The Lenco 30133-103D actuator extension harness weighs 0.78 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this harness?\u003c\/strong\u003e As packaged, the 30133-103D cable measures 9 x 12 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cables come in one package?\u003c\/strong\u003e Each package of the Lenco 30133-103D harness contains one 20 foot extension cable (unit count of 1).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need an actuator extension harness instead of the stock wiring?\u003c\/strong\u003e An extension harness like the Lenco 30133-103D is used when the factory-length actuator wiring cannot reach from the helm or control box to the actuator location, avoiding the need to splice or add extra connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Lenco 30133-103D harness genuine Lenco Marine product?\u003c\/strong\u003e Yes, part number 30133-103D is manufactured by Lenco Marine as an actuator extension cable for its trim tab systems.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49031285571803,"sku":"LEN-30133-103D","price":40.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61Uvl8Gn1iL.jpg?v=1785212606"},{"product_id":"lenco-26-foot-actuator-extension-harness-12-awg-wire-deutsch-connectors-abyc-compliant","title":"Lenco 26 Foot Actuator Extension Harness, 12 AWG Wire, Deutsch Connectors, ABYC Compliant","description":"\u003cp\u003eThis Lenco Actuator Extension Harness gives you 26 feet (7.9 m) of additional cable run between a trim tab actuator and its control wiring, letting you route power further without splicing or compromising connection quality. The harness is built with 12-AWG wire for reliable current delivery over the extended length, and the cable itself is a round, multi-conductor design housed in a durable plastic jacket for protection in a marine environment.\u003c\/p\u003e\u003cp\u003eEach end terminates in a Deutsch DT connector, providing a secure, weather-resistant, plug-and-play connection that matches Lenco's factory wiring so installation does not require cutting or re-terminating wire. The harness is ABYC compliant, meeting recognized marine electrical standards for safe onboard wiring. This extension is manufactured to work with Lenco actuator systems and is specifically suited for use with BEP Marine Terminal Link Kits for 720-MDO size battery switches, making it a practical option when a trim tab or battery switch installation needs additional cable length between components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lenco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 30142-201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Type:\u003c\/strong\u003e Actuator Extension Harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 26 feet (7.9 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 12 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter:\u003c\/strong\u003e 2.05 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Deutsch DT connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Round multi-conductor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e ABYC compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 10 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 874847007306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThis extension harness is specific to BEP Marine Terminal Link Kits for 720-MDO size battery switches, in addition to standard Lenco actuator wiring runs.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Lenco 30142-201 actuator extension harness?\u003c\/strong\u003e The Lenco 30142-201 actuator extension harness measures 26 feet (7.9 meters) in length, giving you extra cable run between the actuator and its control wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gauge wire does this extension harness use?\u003c\/strong\u003e It uses 12-AWG wire, sized to carry the current needed for reliable actuator performance over the full 26-foot run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connectors are on the Lenco 30142-201 harness?\u003c\/strong\u003e Both ends are fitted with Deutsch DT connectors, which snap securely into place for a weather-resistant, plug-and-play connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this harness ABYC compliant?\u003c\/strong\u003e Yes, the Lenco 30142-201 actuator extension harness meets ABYC standards for marine electrical wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this extension harness made of?\u003c\/strong\u003e The cable is a round, multi-conductor design encased in a plastic jacket for protection against moisture and abrasion in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this harness specifically compatible with?\u003c\/strong\u003e The Lenco 30142-201 is specific to BEP Marine Terminal Link Kits for 720-MDO size battery switches, in addition to general Lenco actuator wiring applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to cut or splice wires to install this harness?\u003c\/strong\u003e No, the Lenco 30142-201 uses factory-style Deutsch DT connectors on each end, so it connects directly without cutting or re-terminating wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Lenco 30142-201 extension harness weigh?\u003c\/strong\u003e It weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this harness?\u003c\/strong\u003e The Lenco 30142-201 ships in a package measuring 10 x 7 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Lenco part?\u003c\/strong\u003e Yes, the 30142-201 is a genuine Lenco actuator extension harness, not a generic aftermarket cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this harness?\u003c\/strong\u003e The Lenco 30142-201 is backed by a 1-year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many harnesses come in one package?\u003c\/strong\u003e Each package contains one 26-foot Lenco 30142-201 actuator extension harness.\u003c\/p\u003e","brand":"Lenco Trim Tabs","offers":[{"title":"Default Title","offer_id":49031285604571,"sku":"LEN-30142-201","price":76.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51PKidV24sL.jpg?v=1785212608"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/push-button-trim-switch-28269087490091.jpg?v=1785356973","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trim-tilt-jack-plates-trim-tabs-trim-tab-switches-gauges-relays.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}