{"title":"Trim Tabs","description":null,"products":[{"product_id":"yamaha-outboard-power-trim-relay-assembly-63p-81950-00-fits-25-250-hp-2004-up-sierra-18-1522","title":"Sierra 18-1522 Trim Assembly Relay - Replaces Yamaha 63P-81950-00-00 - Fits Yamaha Outboards","description":"\u003cp\u003eThe Sierra 18-1522 Trim Assembly Relay is a replacement electrical relay for Yamaha outboard power trim and tilt systems. It controls the switching of current to the trim motor circuit, allowing the trim\/tilt system to raise and lower the outboard on command. This relay is built to OEM specification, using a screw connector type and silver contact material for reliable current-carrying capacity, with a normally open contact type and automatic operation mode. It is designed as a panel mount component, matching the mounting configuration of the original Yamaha relay it replaces.\u003c\/p\u003e\u003cp\u003eThis relay directly replaces Yamaha part number 63P-81950-00-00 and is intended to fit a range of Yamaha outboard motors, including 25-150 HP and 200-225 HP models (06-Up), 50-90 HP and 250 HP models (05-Up), and 150 HP models (04-Up). Buyers replacing a failed or intermittent trim relay on a compatible Yamaha outboard can use this part as a direct swap. Sierra parts are backed by Sierra's customer satisfaction warranty, giving added confidence when replacing electrical components in the trim system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-1522\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Yamaha Outboard Trim System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e OEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282375584\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha outboards, 25-150 HP and 200-225 HP (06-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha outboards, 50-90 HP and 250 HP (05-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha outboards, 150 HP (04-Up)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha 63P-81950-00-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-1522 Trim Assembly Relay do?\u003c\/strong\u003e It is an electrical relay that switches current to the power trim and tilt motor circuit on compatible Yamaha outboards, letting the trim\/tilt system raise and lower the outboard when commanded.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-1522 a direct replacement for the original Yamaha relay?\u003c\/strong\u003e Yes, the 18-1522 replaces Yamaha part number 63P-81950-00-00 and is built to OEM specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Yamaha outboards does the 18-1522 trim relay fit?\u003c\/strong\u003e It fits Yamaha outboards of 25-150 HP and 200-225 HP (06-Up), 50-90 HP and 250 HP (05-Up), and 150 HP (04-Up).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the contact type on this relay?\u003c\/strong\u003e The Sierra 18-1522 uses a normally open contact type with silver contact material for reliable switching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-1522 relay mounted?\u003c\/strong\u003e It is a panel mount relay with a screw-type connector for wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-1522 Trim Assembly Relay weigh?\u003c\/strong\u003e It weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this an automatic or manual relay?\u003c\/strong\u003e The 18-1522 operates automatically, switching current to the trim motor circuit without manual actuation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-1522 come with a warranty?\u003c\/strong\u003e Yes, Sierra part 18-1522 is covered under Sierra's customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part number 18-1522?\u003c\/strong\u003e The order includes one Sierra Trim Assembly Relay, part number 18-1522.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-1522 genuine Sierra or aftermarket?\u003c\/strong\u003e It is a genuine Sierra-branded part manufactured to OEM specification, sold as Sierra 18-1522.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UPC is associated with the Sierra 18-1522?\u003c\/strong\u003e The UPC for the Sierra 18-1522 Trim Assembly Relay is 808282375584.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988088271067,"sku":"SIE-18-1522","price":216.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-1522__80657.1722494184.500.750.jpg?v=1785188366"},{"product_id":"sierra-18-1523-trim-relay-assembly-for-yamaha-outboards-replaces-61a-81950-01-00-f25-250-hp","title":"Sierra 18-1523 Trim Assembly Relay, Replaces 61A-81950-01, Fits Yamaha 60-250 HP Outboards","description":"\u003cp\u003eThe Sierra 18-1523 Trim Assembly Relay is a direct replacement electrical relay for the power trim and tilt system on a wide range of Yamaha outboard motors. This relay is the component that switches power to the trim motor, allowing the operator to raise and lower the outboard's tilt angle from the helm. When a trim relay fails or corrodes, the outboard can lose the ability to trim up or down, or the trim motor may run continuously or not at all, so replacing the relay restores normal, controlled trim operation.\u003c\/p\u003e\u003cp\u003eThis relay uses a plug-in connector for a straightforward, tool-minimal installation and mounts using a DIN rail mount configuration, consistent with the factory relay layout used in Yamaha's trim system wiring harness. Internally it uses copper contacts for reliable current conduction and consistent switching performance, and it is built to meet OEM specification so it operates as a like-for-like swap for the original relay. Sierra backs this part with its standard customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003eThe 18-1523 fits a broad range of Yamaha outboard horsepower and model designations, including F25, T25, 60, 70, 75, 80, 85, 90, 150, 200, 225, and 250 HP models across the specific model years listed below, making it a common service and maintenance replacement part for Yamaha outboard trim systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-1523\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trim Assembly Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Plug-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e DIN Rail Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Met:\u003c\/strong\u003e OEM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282375621\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha F25 HP (98-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha T25 HP (01-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha 60 HP (93-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha 70 HP (93-Up)\u003c\/li\u003e\n\u003cli\u003eYamaha 75 HP (94-99)\u003c\/li\u003e\n\u003cli\u003eYamaha 80 HP (97)\u003c\/li\u003e\n\u003cli\u003eYamaha 85 HP (93-96)\u003c\/li\u003e\n\u003cli\u003eYamaha 90 HP (93-09)\u003c\/li\u003e\n\u003cli\u003eYamaha 150 HP (99-05)\u003c\/li\u003e\n\u003cli\u003eYamaha 200 HP (98-05)\u003c\/li\u003e\n\u003cli\u003eYamaha 225 HP (90-04)\u003c\/li\u003e\n\u003cli\u003eYamaha 250 HP (90-04)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e61A-81950-01\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-1523 trim assembly relay replace?\u003c\/strong\u003e The Sierra 18-1523 is a direct replacement for Yamaha OEM part number 61A-81950-01.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Yamaha outboards does this relay fit?\u003c\/strong\u003e This relay fits Yamaha F25 HP (98-Up), T25 HP (01-Up), 60 HP (93-Up), 70 HP (93-Up), 75 HP (94-99), 80 HP (97), 85 HP (93-96), 90 HP (93-09), 150 HP (99-05), 200 HP (98-05), 225 HP (90-04), and 250 HP (90-04) outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-1523 a genuine OEM part or an aftermarket equivalent?\u003c\/strong\u003e The Sierra 18-1523 is an aftermarket relay built to meet OEM specification, providing equivalent form, fit, and function to the original Yamaha trim relay it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector does this relay use?\u003c\/strong\u003e The 18-1523 trim assembly relay uses a plug-in connector type, matching the factory wiring harness connection on supported Yamaha outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the trim relay mounted?\u003c\/strong\u003e The Sierra 18-1523 uses a DIN rail mounting type, consistent with the mounting configuration used in the Yamaha trim system wiring layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the shipping weight of this part?\u003c\/strong\u003e The Sierra 18-1523 trim assembly relay weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-1523 fit Yamaha F25 and T25 models?\u003c\/strong\u003e Yes, the 18-1523 fits Yamaha F25 HP (98-Up) and T25 HP (01-Up) outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order this part?\u003c\/strong\u003e Ordering the Sierra 18-1523 includes one trim assembly relay, ready to install in place of the original Yamaha 61A-81950-01 relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the contact material inside the relay?\u003c\/strong\u003e The 18-1523 relay uses copper contacts, which support reliable current conduction and consistent switching for the trim circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this relay used for the trim and tilt system specifically?\u003c\/strong\u003e Yes, the Sierra 18-1523 is a trim assembly relay used in the power trim and tilt circuit of supported Yamaha outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a warranty included with the 18-1523?\u003c\/strong\u003e Sierra parts, including the 18-1523 trim assembly relay, are covered under Sierra's standard customer satisfaction warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would a trim relay need to be replaced?\u003c\/strong\u003e A failed or corroded trim relay like the original Yamaha 61A-81950-01 can cause the outboard's trim motor to stop responding, run continuously, or lose consistent trim control, which is why the 18-1523 replacement is used to restore normal operation.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988088467675,"sku":"SIE-18-1523","price":149.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-1523__01469.1722510501.500.750.jpg?v=1785188419"},{"product_id":"power-trim-relay-for-johnson-evinrude-8-9-9-15-hp-outboards-replaces-oem-584580-5-terminal-12v-spdt-sierra-18-5705","title":"Sierra Power Trim Relay 18-5705 for Evinrude Outboard Trim Systems","description":"\u003cp\u003eThe Sierra 18-5705 is a power trim relay built for Evinrude outboard trim systems. Trim relays like this one control the electrical circuit that drives the trim\/tilt pump motor, switching power to raise or lower the outboard on command. As a dedicated replacement relay, it is sized to slot into the trim system wiring without modification, giving boat owners a straightforward way to restore trim function when an original relay fails or corrodes.\u003c\/p\u003e\u003cp\u003eThis part is also offered in a display-packaged version, part number 18-5705D, which is the same relay presented in retail packaging rather than bulk packaging - the relay itself is identical between the two part numbers. At just 0.08 pounds, it is a compact, lightweight electrical component designed to mount within the existing trim relay bracket or wiring harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5705\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Power Trim Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Evinrude outboard trim systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay-Packaged Version:\u003c\/strong\u003e 18-5705D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999319517\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5705 used for?\u003c\/strong\u003e The Sierra 18-5705 is a power trim relay used in Evinrude outboard trim systems, where it switches electrical power to the trim\/tilt pump motor to raise or lower the outboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5705 come in a display-packaged version?\u003c\/strong\u003e Yes, the same relay is also sold as part number 18-5705D, which is the display-packaged version rather than bulk packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 18-5705 and 18-5705D?\u003c\/strong\u003e Only the packaging differs - 18-5705D is the display-packaged version of the identical 18-5705 power trim relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5705 power trim relay weigh?\u003c\/strong\u003e It weighs 0.08 pounds, making it a lightweight electrical component within the trim system wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-5705?\u003c\/strong\u003e The UPC for the Sierra 18-5705 power trim relay is 030999319517.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5705 a genuine Sierra part?\u003c\/strong\u003e Yes, part number 18-5705 is a Sierra-branded power trim relay manufactured under the Sierra name for marine trim systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard brand does the 18-5705 relay support?\u003c\/strong\u003e The 18-5705 is categorized for Evinrude outboard trim systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when you order the 18-5705?\u003c\/strong\u003e Ordering part number 18-5705 gets you the power trim relay itself; no additional accessories are specified with this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5705 a trim relay or a trim motor?\u003c\/strong\u003e The 18-5705 is a power trim relay, an electrical switching component, not the trim\/tilt pump motor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-5705 replace a corroded or failed trim relay?\u003c\/strong\u003e A failing or corroded trim relay in an Evinrude trim system can be replaced with the Sierra 18-5705 power trim relay.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988228026587,"sku":"SIE-18-5705","price":20.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/18-5705__83355.1730098990.500.750.jpg?v=1785329179"},{"product_id":"sierra-18-5737-power-trim-relay-for-mercury-mariner-35-220-hp-outboards-1985-1993-replaces-mercury-87-19761","title":"Sierra Power Trim Relay 18-5737 for Mercury 40 HP 4-Cylinder Outboards, Replaces 87-19761","description":"\u003cp\u003eThe Sierra 18-5737 Power Trim Relay is a boat-mount electrical relay used in the power trim and tilt circuit of applicable Mercury outboard motors. It uses a quick connect terminal style and a normally open contact configuration, allowing it to switch the higher current draw of the trim\/tilt motor circuit when the operator engages trim or tilt at the control switch. This relay is designed for Mercury 40 HP 4-cylinder outboards equipped with relays, covering units from serial number 0C159200 and up. It is a direct interchange for Mercury cross-reference number 87-19761, so it can be installed as a like-for-like replacement without modification to the existing wiring harness or mounting hardware. The relay ships as a single unit and is intended as a drop-in replacement part for boat owners and marine technicians performing trim system diagnostics or relay replacement on affected Mercury outboards. As with all Sierra electrical components, the 18-5737 is built to meet or exceed the performance of the original equipment part it replaces, giving boaters a reliable option for restoring proper power trim operation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5737\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Boat Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282103392\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 relay\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 40 HP 4-cylinder outboards with relays, serial number 0C159200 and up\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 87-19761\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-5737 used for?\u003c\/strong\u003e The Sierra 18-5737 is a power trim relay that switches the trim\/tilt motor circuit on applicable Mercury outboards when the operator activates the trim or tilt control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5737 relay fit my Mercury outboard?\u003c\/strong\u003e The 18-5737 fits Mercury 40 HP 4-cylinder outboards equipped with relays, from serial number 0C159200 and up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5737 a direct replacement for the Mercury OEM relay?\u003c\/strong\u003e Yes, part number 18-5737 is a direct interchange for Mercury cross-reference number 87-19761 and installs in place of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical connection does this relay use?\u003c\/strong\u003e The 18-5737 Power Trim Relay uses a quick connect terminal style, so it attaches to the existing trim circuit wiring without needing to splice or solder connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5737 relay normally open or normally closed?\u003c\/strong\u003e It is a normally open (N.O.) contact relay, meaning the circuit stays open until the trim switch is activated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Sierra 18-5737 relay mounted?\u003c\/strong\u003e This is a boat-mount relay, meaning it is secured to a mounting surface on the boat or engine rather than being a plug-in or panel style unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5737 relay weigh?\u003c\/strong\u003e The Sierra 18-5737 Power Trim Relay weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many relays come in the package?\u003c\/strong\u003e The 18-5737 is sold as a single relay unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5737 an OEM or aftermarket part?\u003c\/strong\u003e The 18-5737 is a Sierra aftermarket relay built to meet or exceed the performance of the original Mercury 87-19761 relay it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5737 relay come with a warranty?\u003c\/strong\u003e The Sierra 18-5737 Power Trim Relay is covered under Sierra's standard limited warranty against defects.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988229927131,"sku":"SIE-18-5737","price":50.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-5737_lg__31133.1558129347.500.750.jpg?v=1785188925"},{"product_id":"sierra-18-5849-shrouded-power-trim-relay-replaces-mercury-882751a1-828151-fits-most-2-4-stroke-non-verado-outboards","title":"Sierra 18-5849 Shrouded Trim Relay, White, for Mercury 100 HP 4 Cylinder Outboards","description":"\u003cp\u003eThe Sierra 18-5849 is a shrouded trim relay used to control the power trim and tilt circuit on applicable outboard engines. The white shrouded housing encloses the internal contacts to help shield them from moisture, salt spray, and debris in the engine compartment, while the panel mount design allows it to install into the same relay location as the original part. It is built as a three-terminal, quick-connect relay with a normally open contact configuration and nickel iron alloy contacts for consistent switching performance under repeated trim and tilt cycling.\u003c\/p\u003e\u003cp\u003eThis relay is engineered to meet or exceed the specifications of the original equipment part it replaces, and it is interchangeable with a number of OEM and aftermarket cross-reference numbers, making it a straightforward replacement for boat owners who need to restore trim function without waiting on an OEM-only part. It fits Mercury 100 HP 4 cylinder outboards equipped with 1 Ram Trim and a 5\/16-18 starter terminal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-5849\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Shrouded Trim Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Nickel Iron Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 100 HP 4 Cylinder outboards with 1 Ram Trim and 5\/16-18 starter terminal\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCDI 852-9819\u003c\/li\u003e\n\u003cli\u003eChrysler\/Force\/US Marine 828151\u003c\/li\u003e\n\u003cli\u003eChrysler\/Force\/US Marine 828151A1\u003c\/li\u003e\n\u003cli\u003eMallory 9-15210\u003c\/li\u003e\n\u003cli\u003eMercruiser Stern Drive 882751A1\u003c\/li\u003e\n\u003cli\u003eMercury Marine 828151\u003c\/li\u003e\n\u003cli\u003eMercury Marine 828151A1\u003c\/li\u003e\n\u003cli\u003eMercury Marine 882751A1\u003c\/li\u003e\n\u003cli\u003eMercury Marine 882751A2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-5849 relay do?\u003c\/strong\u003e The Sierra 18-5849 is a shrouded trim relay that controls the power trim and tilt circuit on applicable outboard engines, switching power to the trim motor when the operator raises or lowers the drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-5849 fit my Mercury outboard?\u003c\/strong\u003e The 18-5849 fits Mercury 100 HP 4 cylinder outboards equipped with 1 Ram Trim and a 5\/16-18 starter terminal; check your engine's trim configuration and starter terminal size against these details before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-5849 relay interchangeable with OEM Mercury Marine relays?\u003c\/strong\u003e Yes, the 18-5849 cross-references to Mercury Marine 828151, 828151A1, 882751A1, and 882751A2, along with Mercruiser Stern Drive 882751A1, so it can directly replace those OEM numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-5849 cross-reference to any non-Mercury brands?\u003c\/strong\u003e Yes, this relay also cross-references to CDI 852-9819, Chrysler\/Force\/US Marine 828151 and 828151A1, and Mallory 9-15210.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminals does the 18-5849 relay have?\u003c\/strong\u003e It has 3 terminals and uses a quick-connect connector type, with a normally open contact configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the contacts made of?\u003c\/strong\u003e The internal contacts on the 18-5849 are made of nickel iron alloy, chosen for reliable switching under repeated trim and tilt use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-5849 relay housing?\u003c\/strong\u003e The housing is white with a shrouded design that helps protect the internal contacts from moisture and debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 18-5849 relay mounted?\u003c\/strong\u003e It uses a panel mount design, allowing it to install into the same mounting location as the original relay it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-5849 relay weigh?\u003c\/strong\u003e The Sierra 18-5849 trim relay weighs 0.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-5849 an OEM part or an aftermarket replacement?\u003c\/strong\u003e The 18-5849 is a Sierra-manufactured replacement relay engineered to meet or exceed the specifications of the original equipment part it replaces, rather than an OEM Mercury Marine part itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-5849?\u003c\/strong\u003e You receive one Sierra 18-5849 shrouded trim relay, ready to install in place of the original trim relay.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988327968987,"sku":"SIE-18-5849","price":16.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__12397.1773550942.500.750.jpg?v=1785188653"},{"product_id":"sierra-18-6246-trim-tab-bolt-replaces-yamaha-90105-10m00-00-m10-1-25-x-45mm","title":"Sierra Trim Tab Bolt 18-6246, Replaces 90105-10M00-00, M10-1.25 x 45mm","description":"\u003cp\u003eThe Sierra Trim Tab Bolt 18-6246 is a replacement fastener used to secure the trim tab on outboard and sterndrive gearcases. It is manufactured to an M10 - 1.25 x 45mm thread specification, matching the original equipment bolt it replaces. This bolt is a direct cross-reference for OEM number 90105-10M00-00, making it a straightforward like-for-like replacement when the original trim tab bolt is lost, corroded, or damaged during service. Keeping the trim tab securely fastened with the correct hardware is important, since a loose or missing trim tab bolt can allow the tab (and its anode, where applicable) to shift or separate during operation. As a small, low-cost hardware item, the Sierra 18-6246 is commonly stocked alongside trim tab anodes and gearcase anode kits for routine maintenance and anode replacement jobs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6246\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Trim Tab Bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M10 - 1.25 x 45mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Engine Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e90105-10M00-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the thread size of the Sierra 18-6246 trim tab bolt?\u003c\/strong\u003e The Sierra 18-6246 trim tab bolt has an M10 - 1.25 x 45mm thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-6246 bolt replace OEM part 90105-10M00-00?\u003c\/strong\u003e Yes, the Sierra 18-6246 trim tab bolt is a direct replacement for OEM number 90105-10M00-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this bolt used for?\u003c\/strong\u003e The Sierra 18-6246 is used to secure the trim tab on an outboard or sterndrive gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6246 trim tab bolt weigh?\u003c\/strong\u003e It weighs 0.15 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6246 an OEM or aftermarket part?\u003c\/strong\u003e The 18-6246 is a Sierra aftermarket bolt manufactured to the same M10 - 1.25 x 45mm specification and cross-reference as OEM part 90105-10M00-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the package?\u003c\/strong\u003e The listing includes one Sierra 18-6246 trim tab bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bolt be used when replacing a trim tab anode?\u003c\/strong\u003e Yes, the 18-6246 trim tab bolt is commonly used together with trim tab anode replacement, since both are gearcase trim tab hardware components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length is the Sierra trim tab bolt 18-6246?\u003c\/strong\u003e The bolt measures 45mm in length with an M10 - 1.25 thread pitch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 18-6246 the same bolt regardless of retailer?\u003c\/strong\u003e Yes, 18-6246 is the Sierra manufacturer part number, so it identifies the same M10 - 1.25 x 45mm trim tab bolt cross-referenced to OEM 90105-10M00-00 wherever it is sold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6246 bolt fit my trim tab if the original OEM bolt number is 90105-10M00-00?\u003c\/strong\u003e Yes, the Sierra 18-6246 is listed as a direct replacement for OEM number 90105-10M00-00.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988355690715,"sku":"SIE-18-6246","price":4.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6246__84630.1558185721.500.750.jpg?v=1785329189"},{"product_id":"sierra-18-6749-trim-bracket-for-mercruiser-floor-mount-replaces-42419a1-862548a1-metal","title":"Sierra 18-6749 Trim Bracket, Replaces Mercury\/Mercruiser 42419A1 862548A1, for Floor Mount Bracket","description":"\u003cp\u003eThe Sierra 18-6749 is a metal trim bracket built for the Mercruiser floor mount bracket assembly. It is designed as a direct equivalent to the original Mercury\/Mercruiser components, giving boat owners a dependable option when the factory bracket has worn out, corroded, or been damaged. As with all Sierra engine and drive parts, this bracket is engineered to meet or exceed the specifications of the original equipment it replaces, and is built to hold up to continuous exposure to the marine environment.\u003c\/p\u003e\u003cp\u003eThis bracket is finished in black and constructed of metal for durability under the stress and vibration typical of engine mount and floor mount hardware. It is a compact component, with item dimensions of 0.39 x 0.39 x 0.39 inches, and ships as a single unit ready to install in place of the original bracket. Because it is manufactured to replace the Mercury\/Mercruiser 42419A1 and 862548A1 parts, it installs using the same mounting configuration as those original components, making it a straightforward swap for anyone servicing a Mercruiser floor mount bracket setup.\u003c\/p\u003e\u003cp\u003eSierra backs this trim bracket, like all of its parts, with its Customer Satisfaction Warranty, covering defects in workmanship and materials for the useful life of the product.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6749\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Floor Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 0.39 x 0.39 x 0.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor Mercruiser floor mount bracket applications.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury\/Mercruiser 42419A1\u003c\/li\u003e\n\u003cli\u003eMercury\/Mercruiser 862548A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6749 trim bracket fit?\u003c\/strong\u003e The Sierra 18-6749 is made for the Mercruiser floor mount bracket setup, serving as a replacement bracket for that mounting configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-6749 replace?\u003c\/strong\u003e It replaces Mercury\/Mercruiser part numbers 42419A1 and 862548A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6749 bracket a genuine Sierra part or an aftermarket copy?\u003c\/strong\u003e It is a genuine Sierra part, manufactured by Sierra as a direct replacement for the original Mercury\/Mercruiser 42419A1 and 862548A1 brackets, and is covered under Sierra's Customer Satisfaction Warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-6749 trim bracket made from?\u003c\/strong\u003e This trim bracket is made of metal, finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Sierra 18-6749?\u003c\/strong\u003e The bracket measures 0.39 x 0.39 x 0.39 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-6749 trim bracket weigh?\u003c\/strong\u003e It weighs 2.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Sierra 18-6749 work as well as the original Mercury\/Mercruiser bracket?\u003c\/strong\u003e Yes, Sierra engineers this bracket to meet or exceed the specifications of the original 42419A1 and 862548A1 parts it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 18-6749 bracket?\u003c\/strong\u003e It is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-6749 come with a warranty?\u003c\/strong\u003e Yes, it is covered under Sierra's Customer Satisfaction Warranty, which warrants the product against defects in workmanship and materials for its useful life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Sierra 18-6749?\u003c\/strong\u003e The order includes one Sierra 18-6749 trim bracket for the Mercruiser floor mount bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6749 a direct swap for my existing floor mount bracket?\u003c\/strong\u003e Since it replaces the same Mercury\/Mercruiser 42419A1 and 862548A1 numbers, it is designed to mount in place of those original brackets on the Mercruiser floor mount bracket assembly.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988357886171,"sku":"SIE-18-6749","price":104.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-6749__64232.1558185773.500.750.jpg?v=1785188284"},{"product_id":"stainless-steel-trim-bracket-for-mercruiser-floor-mount-replaces-862548a1-42419a1-sierra-18-6750","title":"Sierra 18-6750 Stainless Steel Trim Bracket for MerCruiser Floor Mount Bracket, Replaces 862548A1","description":"\u003cp\u003eThe Sierra 18-6750 is a stainless steel trim bracket engineered for MerCruiser floor mount bracket applications. It is built as a direct replacement for the original equipment bracket, giving boat owners a durable, corrosion-resistant option for maintaining or restoring their trim system's floor mount hardware.\u003c\/p\u003e\u003cp\u003eConstructed entirely of stainless steel, the 18-6750 is designed to withstand the harsh marine environment, resisting rust and corrosion from prolonged saltwater or freshwater exposure better than painted or plated steel alternatives. Each package includes one bracket, ready to be installed in place of the original MerCruiser floor mount bracket.\u003c\/p\u003e\u003cp\u003eThis bracket is manufactured to meet or exceed the specifications of the original equipment part it replaces, making it a reliable choice for MerCruiser stern drive owners performing a trim system repair or rebuild. It carries the Sierra manufacturer part number 18-6750 and directly interchanges with several original Mercury Marine and MerCruiser part numbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-6750\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e MerCruiser Floor Mount Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8.5 x 10.98 x 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1 bracket per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 88893A4, 88553A1, 862548A1, 58397A3, 58397A2, 42419A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMerCruiser Floor Mount Bracket applications\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e88893A4\u003c\/li\u003e\n\u003cli\u003e88553A1\u003c\/li\u003e\n\u003cli\u003e862548A1\u003c\/li\u003e\n\u003cli\u003e58397A3\u003c\/li\u003e\n\u003cli\u003e58397A2\u003c\/li\u003e\n\u003cli\u003e42419A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-6750 trim bracket fit?\u003c\/strong\u003e The Sierra 18-6750 is designed for MerCruiser floor mount bracket applications, serving as a direct replacement for the original floor mount trim bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-6750 bracket the same as the original MerCruiser part?\u003c\/strong\u003e Yes, the Sierra 18-6750 is manufactured to meet or exceed the specifications of the original equipment MerCruiser floor mount bracket it replaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat OEM part numbers does the 18-6750 replace?\u003c\/strong\u003e This bracket cross-references to OEM numbers 88893A4, 88553A1, 862548A1, 58397A3, 58397A2, and 42419A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 18-6750 trim bracket made of?\u003c\/strong\u003e It is made entirely of stainless steel for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-6750 trim bracket weigh?\u003c\/strong\u003e The Sierra 18-6750 weighs 2.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 18-6750 bracket?\u003c\/strong\u003e The bracket measures 8.5 x 10.98 x 5.75 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brackets come in one package?\u003c\/strong\u003e Each package of the Sierra 18-6750 includes one trim bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-6750 rust or corrode over time?\u003c\/strong\u003e Because it is built from stainless steel, the 18-6750 resists rust and corrosion far better than painted or plated steel brackets used in some original equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-6750 an OEM or aftermarket part?\u003c\/strong\u003e The 18-6750 is an aftermarket replacement bracket manufactured by Sierra to match or exceed the original equipment part's specifications and fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 18-6750 be used to rebuild a MerCruiser trim system?\u003c\/strong\u003e Yes, the 18-6750 stainless steel bracket is commonly used when repairing or rebuilding the floor mount portion of a MerCruiser trim system.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988358115547,"sku":"SIE-18-6750","price":146.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/sie-18-6750_lg__40442.1558139658.500.750.jpg?v=1785188219"},{"product_id":"sierra-18-99523-tilt-trim-relay-assembly-for-mercury-outboards","title":"Sierra Tilt\/Trim Relay Assembly 18-99523 for Mercury Outboard Motors","description":"\u003cp\u003eThe Sierra 18-99523 is a tilt\/trim relay assembly built for Mercury outboard motors. The relay assembly is the electrical switching component that directs battery current to the tilt\/trim motor when the operator raises or lowers the outboard, and a failed or corroded relay is a common reason a trim system stops responding even though the trim motor and pump themselves are still good. Replacing the relay assembly with a properly matched unit restores reliable up\/down operation without having to replace the entire trim motor.\u003c\/p\u003e\u003cp\u003eThis assembly ships as a complete unit under part number 18-99523, making it a straightforward swap for the outboard's existing tilt\/trim relay. It is sold and identified by its own UPC for easy verification against your outboard's electrical system before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-99523\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tilt\/Trim Relay Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mercury Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282395070\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury outboard motors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-99523?\u003c\/strong\u003e It is a tilt\/trim relay assembly, part number 18-99523, designed for Mercury outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a tilt\/trim relay assembly do?\u003c\/strong\u003e The relay assembly switches battery current to the outboard's tilt\/trim motor, allowing the operator to raise and lower the outboard using the trim controls; the Sierra 18-99523 is the relay assembly for that circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-99523 relay assembly fit my Mercury outboard?\u003c\/strong\u003e The Sierra 18-99523 tilt\/trim relay assembly is built for Mercury outboard motors; confirm against your outboard's existing relay before ordering since exact model coverage is not listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-99523 relay assembly weigh?\u003c\/strong\u003e The Sierra 18-99523 tilt\/trim relay assembly weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 18-99523 sold as a complete relay assembly or individual parts?\u003c\/strong\u003e It is sold as a complete tilt\/trim relay assembly under part number 18-99523, ready to install as a unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-99523 relay assembly?\u003c\/strong\u003e The UPC for the Sierra 18-99523 tilt\/trim relay assembly is 808282395070, which can be used to verify the correct product before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my outboard's tilt\/trim relay?\u003c\/strong\u003e A worn or corroded relay is a common cause of an unresponsive tilt\/trim system even when the trim motor itself is fine; installing the Sierra 18-99523 relay assembly addresses that failure point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 18-99523 relay assembly include mounting hardware?\u003c\/strong\u003e The listing covers the tilt\/trim relay assembly itself, part number 18-99523; additional mounting hardware details are not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-99523 a direct replacement relay assembly?\u003c\/strong\u003e The Sierra 18-99523 is offered as a direct-fit tilt\/trim relay assembly for Mercury outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat brand makes the 18-99523 tilt\/trim relay?\u003c\/strong\u003e The 18-99523 tilt\/trim relay assembly is manufactured by Sierra for Mercury outboard applications.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988445343963,"sku":"SIE-18-99523","price":110.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CDI-852-9820_lg__99719.1558114406.500.750.jpg?v=1785329187"},{"product_id":"t-h-marine-ttc-1-push-button-transom-trim-control-switch-50-amp-weatherproof-tilt-trim-hydraulic-jack-plate-switch-black","title":"T-H Marine TTC-1 Push Button Trim Switch, 50 Amp, for Outboards, Stern Drives and Hydraulic Jack Plates","description":"\u003cp\u003eThe T-H Marine TTC-1 is a push button transom trim control switch built to put reliable tilt and trim control anywhere it is needed on the boat. Rather than being locked into a single factory switch location, this versatile switch can be surface mounted on any flat area near the stern, giving one person full control of positioning the motor support without help. Beyond standard outboard and stern drive trim duty, the TTC-1 also works for remote adjustment of hydraulic jack plates, making it a flexible control option for boats running jack plate setups.\u003c\/p\u003e\u003cp\u003eThe switch housing is molded black plastic with raised white lettering for easy identification at the helm or transom, and the design is weatherproof with an IP54 ingress protection rating to stand up to spray and marine conditions. Internally it is a normally closed, 2-way push button switch rated for 50 amps at 12 volts DC, sized to handle the current draw of trim and jack plate motors. Each switch comes with an 18 inch pigtail wire and installation instructions, simplifying wiring into the existing trim circuit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e TTC-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Push Button Trim Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 50 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Molded black plastic with raised white lettering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 18 inch pigtail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.6 x 4 x 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e 30 to 120 degrees Fahrenheit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount, any flat surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e Outboards, stern drives, hydraulic jack plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572003406\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the T-H Marine TTC-1 used for?\u003c\/strong\u003e The TTC-1 is a push button transom trim control switch that gives one person weatherproof control of motor trim and tilt from anywhere it is mounted on the boat, and it can also be used for remote adjustment of hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the TTC-1 work with a hydraulic jack plate?\u003c\/strong\u003e Yes, in addition to standard trim and tilt duty on outboards or stern drives, the TTC-1 can be used to remotely operate hydraulic jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage rating of the TTC-1 trim switch?\u003c\/strong\u003e The TTC-1 is rated for 50 amps, sized to handle the current draw of trim and jack plate motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the TTC-1 trim switch operate on?\u003c\/strong\u003e The TTC-1 operates on a 12 volt DC marine electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the TTC-1 switch mounted?\u003c\/strong\u003e The TTC-1 housing is designed for surface mounting and can be installed on any flat surface, so it does not have to go in a fixed factory switch location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the TTC-1 switch?\u003c\/strong\u003e Each T-H Marine TTC-1 comes with an 18 inch pigtail wire and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the TTC-1 switch housing made of?\u003c\/strong\u003e The TTC-1 housing is molded black plastic with raised white lettering for easy identification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TTC-1 switch weatherproof?\u003c\/strong\u003e Yes, the TTC-1 has a weatherproof, UV stable molded housing with an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the TTC-1?\u003c\/strong\u003e The T-H Marine TTC-1 measures 7.6 x 4 x 1.6 inches and weighs 0.26 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical contact does the TTC-1 use?\u003c\/strong\u003e The TTC-1 is a normally closed, 2-way push button switch with 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TTC-1 compatible with outboards and stern drives?\u003c\/strong\u003e Yes, the TTC-1 is designed as a trim switch for both outboards and stern drives, in addition to hydraulic jack plate operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the TTC-1 need to be mounted in the original switch location?\u003c\/strong\u003e No, the TTC-1 is built to be mounted anywhere on a flat surface, letting installers place trim or jack plate control wherever it is most convenient rather than being limited to the stock switch location.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991273255131,"sku":"T-H-TTC-1","price":53.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/push-button-trim-switch-28269087490091.jpg?v=1784499098"},{"product_id":"power-trim-relay-for-evinrude-johnson-outboards-replaces-18-5705-mpn-300-01561","title":"EMP Power Trim Relay for Evinrude Outboard Motors, Part 300-01561","description":"\u003cp\u003eThe EMP Power Trim Relay, part number 300-01561, is an electrical relay built for the power trim and tilt systems on Evinrude outboard motors. The trim relay is the switching component that directs battery current to the trim\/tilt pump motor when the operator presses the trim switch, allowing the outboard to raise and lower under power. When a trim relay fails or sticks, the outboard may not tilt or trim at all, or may trim in only one direction, so replacing the relay with a properly rated unit restores normal up\/down operation.\u003c\/p\u003e\u003cp\u003eThis relay is built to handle the higher current draw of a trim\/tilt motor circuit and is sized as a direct fit for Evinrude outboard trim relay applications. It is a compact, sealed electrical component intended to mount in the existing relay location in the outboard's wiring harness alongside the trim\/tilt system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e EMP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 300-01561\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power Trim Relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Evinrude outboard motor trim\/tilt systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840080465227\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.082 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the EMP 300-01561 relay used for?\u003c\/strong\u003e EMP part 300-01561 is a power trim relay that switches battery current to the trim\/tilt pump motor on an Evinrude outboard, allowing the motor to raise and lower when the trim switch is pressed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this relay fit my Evinrude outboard?\u003c\/strong\u003e The EMP 300-01561 is designed for Evinrude outboard motor trim\/tilt systems; check that your outboard's trim relay is the failed component before ordering a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my trim relay needs to be replaced?\u003c\/strong\u003e If an Evinrude outboard will not tilt or trim, trims in only one direction, or the trim motor runs but the outboard does not move, a failed trim relay such as the EMP 300-01561 is a common cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the EMP 300-01561 trim relay weigh?\u003c\/strong\u003e The EMP 300-01561 power trim relay weighs 0.082 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the EMP 300-01561 relay?\u003c\/strong\u003e The UPC for the EMP 300-01561 Power Trim Relay is 840080465227.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the EMP 300-01561 an OEM or aftermarket part?\u003c\/strong\u003e EMP 300-01561 is an aftermarket power trim relay manufactured to serve as a direct replacement in Evinrude outboard trim\/tilt circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order part 300-01561?\u003c\/strong\u003e Ordering EMP 300-01561 includes one power trim relay for the Evinrude outboard trim\/tilt system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the trim relay myself?\u003c\/strong\u003e The EMP 300-01561 relay mounts in the outboard's existing trim relay location and connects to the existing wiring harness, which allows for straightforward replacement by anyone comfortable working with marine electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim relay affect steering or only trim\/tilt?\u003c\/strong\u003e The EMP 300-01561 relay is part of the trim\/tilt circuit only; it controls the up and down movement of the outboard and is not part of the steering system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms show up specifically from a bad trim relay versus a bad trim motor?\u003c\/strong\u003e With a failed trim relay like the EMP 300-01561, the trim\/tilt motor typically will not run at all in the affected direction because it is not receiving switched power, whereas a bad trim motor may hum or draw current without moving the outboard.\u003c\/p\u003e","brand":"EMP","offers":[{"title":"Default Title","offer_id":48991284592859,"sku":"EMP-300-01561","price":15.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/EMP-300-03085-BRP-Power-Trim-Relay__95312.1722371794.500.750.jpg?v=1785329112"},{"product_id":"davis-instruments-whale-tail-xl-aluminum-hydrofoil-stabilizer-for-i-o-and-outboard-motors","title":"Davis Instruments Whale Tail XL Aluminum Hydrofoil Stabilizer for I\/O and Outboard Motors","description":"\u003cp\u003eThe Davis Instruments Whale Tail XL is an aluminum stabilizer fin designed to improve the performance of any inboard\/outboard or outboard-powered boat. It extends out behind the propeller, positioning itself to capture prop wash energy that is normally lost as the boat runs. The Whale Tail XL converts that energy into lift, giving the boat a more immediate response when the throttle is applied.\u003c\/p\u003e\u003cp\u003eOnce installed, the Whale Tail XL works to reduce porpoising and cavitation, smooth out the ride in rough water, and stabilize bow-light boats for improved safety and visibility. It flattens the wake behind the boat, which is useful for waterskiing, and helps create positive, skid-free turns. Boaters can expect increased top speed and improved fuel economy in most applications as a result of the added lift and stability.\u003c\/p\u003e\u003cp\u003eThe Whale Tail XL is built from marine-grade aluminum with a durable anodized finish to resist corrosion in both freshwater and saltwater use. It mounts to the anti-cavitation plate of the motor and installs in about 15 minutes using the included stainless steel mounting hardware, making it a straightforward upgrade for any inboard\/outboard or outboard motor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Davis Instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 448\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Whale Tail XL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 15.5 x 13.5 x 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Time:\u003c\/strong\u003e Approximately 15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Use:\u003c\/strong\u003e Freshwater and saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 011698006397\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 00011698006397\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Whale Tail XL do?\u003c\/strong\u003e The Davis Instruments Whale Tail XL is an aluminum stabilizer fin that extends out behind the propeller to capture prop wash energy that would otherwise be lost, converting it into lift for a more immediate response when the throttle is applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Whale Tail XL fit my boat?\u003c\/strong\u003e Yes, the Whale Tail XL is designed to improve performance on any boat powered by an inboard\/outboard (I\/O) or outboard motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Whale Tail XL work in saltwater?\u003c\/strong\u003e Yes, the Whale Tail XL can be used year-round in both freshwater and saltwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does installation take?\u003c\/strong\u003e Installing the Whale Tail XL takes about 15 minutes, and stainless steel mounting hardware is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Whale Tail XL made of?\u003c\/strong\u003e It is built from marine-grade aluminum with a durable anodized finish for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Whale Tail XL?\u003c\/strong\u003e The Whale Tail XL measures 15.5 x 13.5 x 1.25 inches and weighs 3 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Whale Tail XL reduce porpoising and cavitation?\u003c\/strong\u003e Yes, one of the main benefits of the Whale Tail XL is reducing porpoising and cavitation while smoothing out the ride in rough water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Whale Tail XL improve fuel economy?\u003c\/strong\u003e Most applications see increased top speed and improved fuel savings after installing the Whale Tail XL, since the fin turns wasted prop wash energy into usable lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Whale Tail XL good for waterskiing?\u003c\/strong\u003e Yes, the Whale Tail XL flattens the wake behind the boat and helps create positive, skid-free turns, which makes it well suited to waterskiing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the Whale Tail XL mount?\u003c\/strong\u003e The Whale Tail XL mounts on the anti-cavitation plate of the motor, positioned behind the propeller to capture prop wash energy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Whale Tail XL come with mounting hardware?\u003c\/strong\u003e Yes, stainless steel mounting hardware is included with the Whale Tail XL.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Whale Tail XL help a bow-light boat?\u003c\/strong\u003e Yes, the Whale Tail XL stabilizes bow-light boats, improving both ride quality and visibility.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":49026458681563,"sku":"DAV-448","price":127.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/00448_02.jpg?v=1785026827"},{"product_id":"bennett-marine-12-x-12-inch-hydraulic-trim-tab-kit-with-all-in-one-indicator-control-6bt-50110-89-00","title":"Bennett Marine 12 x 12 Inch Hydraulic Trim Tab Kit with All-in-One Indicator Control, 6BT-50110-89-00","description":"\u003cp\u003eThis Bennett Marine hydraulic trim tab kit gives boaters power, precision, and durability in a complete 12 inch by 12 inch trim plane system paired with Bennett's All-in-One Indicator Control. The kit is built to help a boat get on plane faster and hold plane at intermediate speeds, no matter the load, speed, or water conditions. As a boat accelerates, the bow rises and creates hull drag that hurts fuel efficiency; this trim tab kit reduces that drag, which allows the boat to run on less fuel. The tabs can also be angled independently to correct uneven loads, listing, and side-to-side imbalance.\u003c\/p\u003e\u003cp\u003eThe kit includes two Bennett hydraulic actuators, which are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tab planes into position. All hydraulic lines and wiring run internally and are concealed by the upper hinge, keeping them protected from harsh marine environments. The trim planes use a riveted angle tab style with an exclusive transom mount interlocking design.\u003c\/p\u003e\u003cp\u003eControl comes from Bennett's All-in-One Indicator Control, a stand-alone helm unit built for straightforward installation and operation. It features dedicated All Up and All Down buttons for one-touch positioning and includes auto tab retraction, so the tabs automatically return up when the ignition is powered off. The control is designed to work for both new trim tab installations and common retrofit installations. Trim tabs help reduce pounding, eliminate porpoising, and improve visibility and handling at speed, and this system is backed by low-maintenance, long-term hydraulic components.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT-50110-89-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e 1212OBI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e All-in-One Indicator Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e (2) A1101A hydraulic trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Style:\u003c\/strong\u003e Riveted angle tab with transom mount interlocking design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 32 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600658\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tabs; 3 year warranty on the All-in-One control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bennett Marine 12 x 12 hydraulic trim tab kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit, hydraulic tubing and hardware, and Bennett's All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this trim tab kit come with a helm control?\u003c\/strong\u003e Yes, this 12 x 12 kit (6BT-50110-89-00) includes Bennett's All-in-One Indicator Control, a stand-alone helm unit with dedicated All Up and All Down buttons for one-touch tab positioning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the tabs retract automatically when the boat is shut off?\u003c\/strong\u003e Yes. The All-in-One Indicator Control included with this kit has auto tab retraction, so the trim tabs automatically return to the up position when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this kit?\u003c\/strong\u003e The trim tab planes in this Bennett Marine kit measure 12 inches wide by 12 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e This Bennett Marine hydraulic trim tab kit weighs 28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of this kit?\u003c\/strong\u003e The kit ships in a package measuring 32 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used for a retrofit installation, or only new builds?\u003c\/strong\u003e The All-in-One Indicator Control included with this Bennett Marine kit is designed to accommodate both new trim tab installations and common retrofit installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wiring protected on this system?\u003c\/strong\u003e All hydraulic lines and wires run internally and are concealed by the upper hinge of the trim tab, keeping them shielded from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the hydraulic actuators made of?\u003c\/strong\u003e The two A1101A hydraulic actuators included in this kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tab planes into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this kit and Bennett's Euro-style rocker switch trim tab kits?\u003c\/strong\u003e This 6BT-50110-89-00 kit uses Bennett's All-in-One Indicator Control, a stand-alone unit with All Up\/All Down buttons and auto retraction, while Bennett's Euro-style kits use a simpler rocker switch without a dedicated indicator control unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty covers this trim tab kit?\u003c\/strong\u003e The trim tabs in this Bennett Marine kit are backed by a limited lifetime warranty, and the included All-in-One control is backed by a separate 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab system correct an uneven load or list?\u003c\/strong\u003e Yes, the independently adjustable trim tab planes in this Bennett Marine kit can be angled to correct uneven loads, listing, and side-to-side imbalance while underway.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449618651,"sku":"BEN-1212OBI","price":1236.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-1212OBI-12-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-All-in-One-Control__43870.1739463173.500.750.jpg?v=1785163386"},{"product_id":"bennett-1812e-complete-18-x-12-inch-hydraulic-trim-tab-kit-with-euro-style-rocker-switch","title":"Bennett 1812E Complete 18 x 12 Inch Hydraulic Trim Tab Kit with Euro-Style Rocker Switch","description":"\u003cp\u003eThe Bennett 1812E is a complete hydraulic trim tab kit built around an 18 inch wide by 12 inch deep stainless steel trim tab plane, paired with a Euro-Style rocker switch control at the helm. Hydraulic trim tabs like this kit are built for boats that stay in the water and need dependable, high-speed action in demanding marine conditions. As a boat accelerates, the bow rises and the hull drags, burning extra fuel; this kit is designed to get the boat on plane faster and hold plane at intermediate speeds, cutting hull drag and improving fuel efficiency. The tabs can also be adjusted to correct uneven loading or listing.\u003c\/p\u003e\u003cp\u003eEach trim tab is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion, keeping maintenance minimal over the long term. The kit's two A1101A hydraulic actuators are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position, and all hydraulic lines and wiring run internally, concealed by the upper hinge, so they are not exposed to harsh marine environments. Power comes from the included V351HPU1 hydraulic power unit with wiring, operated through the Euro-Style rocker switch control at the helm.\u003c\/p\u003e\u003cp\u003eThis complete package includes two stainless steel trim tabs, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit with wiring, one Euro-Style rocker switch control, a hardware bag, 20 feet of hydraulic tubing, and installation instructions, backed by a manufacturer limited lifetime warranty. It suits flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500014800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 1812E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Complete Hydraulic Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Euro-Style Rocker Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e (2) A1101A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 25 inches L x 15 inches W x 5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285125601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Manufacturer Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett 1812E hydraulic trim tab kit do?\u003c\/strong\u003e It helps a boat get on plane faster and hold plane at intermediate speeds by adjusting the 18 x 12 inch trim tab planes, which reduces hull drag, improves fuel efficiency, and corrects listing or uneven loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett 1812E kit?\u003c\/strong\u003e The trim tab planes in the Bennett 1812E kit measure 18 inches wide by 12 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat control does the Bennett 1812E kit use?\u003c\/strong\u003e This kit comes with a Euro-Style rocker switch control at the helm, used to adjust the trim tabs individually or together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the Bennett 1812E trim tab kit?\u003c\/strong\u003e The complete kit includes two stainless steel trim tabs, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit with wiring, one Euro-Style rocker switch control, a hardware bag, 20 feet of hydraulic tubing, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the trim tabs on the Bennett 1812E welded or sheared?\u003c\/strong\u003e The Bennett 1812E trim tabs are sheared and bent, not welded, because welding alters the properties of stainless steel and invites corrosion, keeping long-term maintenance minimal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wiring protected on this system?\u003c\/strong\u003e On the Bennett 1812E, the hydraulic lines and wires are routed internally and concealed by the upper hinge, so they are not exposed to harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is the Bennett 1812E trim tab kit recommended for?\u003c\/strong\u003e The Bennett 1812E is well suited for flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this trim tab kit?\u003c\/strong\u003e The Bennett hydraulic trim tab kit with Euro-Style rocker control carries manufacturer part number 6BT500014800.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett 1812E trim tab kit weigh?\u003c\/strong\u003e The complete Bennett 1812E hydraulic trim tab kit weighs 28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hydraulic power unit and actuators come with the Bennett 1812E?\u003c\/strong\u003e This kit ships with a V351HPU1 hydraulic power unit and two A1101A hydraulic trim tab actuators, which are flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett 1812E trim tab kit?\u003c\/strong\u003e The Bennett 1812E hydraulic trim tab kit is backed by a manufacturer limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Euro-Style control the only helm control option for this size trim tab?\u003c\/strong\u003e The 18 x 12 inch trim tab planes used in the Bennett 1812E are also offered with an All-in-One Indicator Control helm unit under a different Bennett kit and part number, so buyers who want auto tab retraction and All Up\/All Down buttons should confirm which control style they need before ordering.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449651419,"sku":"BEN-1812E","price":933.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-1812E-Complete-18-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-Euro-Style-Rocker-Trim-Switch__78217.1737894040.500.750.jpg?v=1785163386"},{"product_id":"bennett-marine-complete-12-in-x-12-in-hydraulic-trim-tab-kit-with-euro-style-rocker-switch","title":"Bennett Marine Complete 12 in x 12 in Hydraulic Trim Tab Kit with Euro-Style Rocker Switch","description":"\u003cp\u003eThe Bennett Marine Complete 12 in x 12 in Hydraulic Trim Tab Kit (6BT500005700) is a full hydraulic trim tab system built for boats that stay in the water and see high-speed action under demanding marine conditions. It helps a boat get on plane faster and stay planed at intermediate speeds by countering the bow rise that creates hull drag and cuts fuel efficiency. Bennett trim tabs get the boat on plane quickly, reducing hull drag and fuel use, and can also be used to correct uneven loads caused by passengers, gear, or fuel distribution.\u003c\/p\u003e\u003cp\u003eEach trim tab plane measures 12 inches wide by 12 inches deep and is sheared and bent from stainless steel rather than welded, since welding alters the properties of stainless steel and invites corrosion. The kit includes two Bennett Hydraulic Actuators, strong flexible nylon\/fiberglass hydraulic cylinders that push the tabs into position, plus a V351HPU1 Hydraulic Power Unit with wiring and a Euro-Style Rocker Switch control. All hydraulic lines and wires run internally, concealed by the upper hinge, so they are not exposed to harsh marine environments. Installation instructions and a hardware bag are included, and the system is backed by a manufacturer limited lifetime warranty.\u003c\/p\u003e\u003cp\u003eThis trim tab kit is recommended for flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500005700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Euro-Style Rocker Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e (2) A1101A Hydraulic Trim Tab Actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1 with Wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 25 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285121603\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Types:\u003c\/strong\u003e Flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, cruisers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Manufacturer Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this kit?\u003c\/strong\u003e The trim tab planes in the Bennett Marine 6BT500005700 kit measure 12 inches wide by 12 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with this hydraulic trim tab kit?\u003c\/strong\u003e The kit includes two stainless steel trim tabs, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit with wiring, one Euro-Style Rocker Switch control, a hardware bag, 20 feet of hydraulic tubing, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the trim tabs welded or formed from a single sheet?\u003c\/strong\u003e The stainless steel trim tabs in this Bennett Marine kit are sheared and bent rather than welded, since welding alters the properties of stainless steel and can invite corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of control switch operates this trim tab system?\u003c\/strong\u003e This kit uses a Euro-Style Rocker Switch control, which is a simpler stand-alone toggle-style switch rather than Bennett's All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wiring protected on this system?\u003c\/strong\u003e On the 6BT500005700 trim tab kit, all hydraulic lines and wires run internally and are concealed by the upper hinge, keeping them out of harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is this Bennett Marine trim tab kit recommended for?\u003c\/strong\u003e This kit is recommended for flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo trim tabs actually improve fuel economy?\u003c\/strong\u003e Yes. By countering bow rise on acceleration, the Bennett Marine 12 in x 12 in trim tab kit reduces hull drag, which helps the boat get on plane faster and use less fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab kit correct an uneven load on the boat?\u003c\/strong\u003e Yes, the trim tabs on this Bennett Marine hydraulic kit can be adjusted individually to correct listing caused by uneven passenger, gear, or fuel distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e The Bennett Marine 6BT500005700 hydraulic trim tab kit weighs 27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators and power unit does this kit use?\u003c\/strong\u003e This kit uses two A1101A hydraulic trim tab actuators driven by a V351HPU1 hydraulic power unit with wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab system covered by a warranty?\u003c\/strong\u003e The Bennett Marine 6BT500005700 hydraulic trim tab kit is backed by a manufacturer limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit differ from Bennett's 12 in x 12 in kit with All-in-One Control?\u003c\/strong\u003e Both use the same 12 inch by 12 inch trim tab planes and A1101A actuators, but the 6BT500005700 kit uses a Euro-Style Rocker Switch control instead of Bennett's All-in-One Indicator Control with auto tab retraction.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449684187,"sku":"BEN-1212E","price":910.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-Complete-12-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-Euro-Style-Trim-Switch__31336.1739477221.500.750.jpg?v=1785163386"},{"product_id":"bennett-18-x-12-hydraulic-trim-tab-kit-with-all-in-one-indicator-control-6bt501109000","title":"Bennett 18 x 12 Hydraulic Trim Tab Kit with All-in-One Indicator Control 6BT501109000","description":"\u003cp\u003eThe Bennett 18 x 12 Hydraulic Trim Tab Kit with All-in-One Indicator Control gives boaters precise, powerful control over trim in changing load, speed, and water conditions. Bennett's hydraulic trim tabs are engineered for power, precision, and durability, helping a boat get on plane quickly, which reduces hull drag and improves fuel efficiency. The tabs can also be used to correct uneven loads for a more level, stable ride.\u003c\/p\u003e\u003cp\u003eThis kit includes two Bennett hydraulic actuators, strong flexible nylon\/fiberglass hydraulic cylinders that push the trim planes into position. All hydraulic lines and wires are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments. The trim planes use an exclusive transom mount interlocking tab design with a riveted angle tab style for a secure, low-maintenance installation.\u003c\/p\u003e\u003cp\u003eIncluded is Bennett's All-in-One Indicator Control, a stand-alone helm control designed for easy installation and operation. It features convenient All Up and All Down buttons and automatic tab retraction, so the tabs retract fully when the ignition is powered off. The complete kit includes two trim plane assemblies, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit, hydraulic tubing and hardware, and the All-in-One Indicator Control unit, backed by a manufacturer limited lifetime warranty on the trim tab system and a 3 year warranty on the control.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT501109000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e All-in-One Indicator Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Design:\u003c\/strong\u003e Riveted angle tab, transom mount interlocking design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes; nylon\/fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Brushed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 32 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tab system; 3 year warranty on All-in-One Indicator Control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett 6BT501109000 kit?\u003c\/strong\u003e The trim planes in this Bennett hydraulic trim tab kit measure 18 inches wide by 12 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a control unit?\u003c\/strong\u003e Yes, the Bennett 6BT501109000 kit includes the All-in-One Indicator Control, a stand-alone helm control with All Up and All Down buttons and automatic tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit, hydraulic tubing and hardware, and the All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett 18 x 12 trim tab kit weigh?\u003c\/strong\u003e This complete kit weighs 30 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of this trim tab kit?\u003c\/strong\u003e The Bennett 6BT501109000 kit ships in a package measuring 32 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes are stainless steel, and the hydraulic actuators are constructed of flexible nylon\/fiberglass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wires protected on this system?\u003c\/strong\u003e On the Bennett 6BT501109000 trim tab system, all hydraulic lines and wires are routed internally and concealed by the upper hinge, keeping them out of harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim tab control automatically retract the tabs?\u003c\/strong\u003e Yes, the All-in-One Indicator Control included with this kit has auto tab retraction, so the tabs retract fully when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting design of this trim tab system?\u003c\/strong\u003e This kit uses an exclusive transom mount interlocking tab design with a riveted angle tab style for secure, low-maintenance installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this Bennett trim tab kit?\u003c\/strong\u003e The trim tab system carries a manufacturer limited lifetime warranty, and the All-in-One Indicator Control is backed by a 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab kit help correct uneven loads on my boat?\u003c\/strong\u003e Yes, the Bennett 6BT501109000 hydraulic trim tab kit can be used to correct uneven or listing loads in addition to improving planing performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat benefits does this trim tab system provide while underway?\u003c\/strong\u003e It helps a boat get on plane faster and stay on plane at intermediate speeds, reduces pounding, eliminates porpoising, and improves visibility, safety, and fuel efficiency.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449716955,"sku":"BEN-1812OBI","price":1268.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-1812OBI-18-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-All-in-One-Control__75286.1739477218.500.750.jpg?v=1785163386"},{"product_id":"bennett-129e-hydraulic-trim-tab-kit-12-x-9-inch-euro-style-rocker-switch-control","title":"Bennett 129E Hydraulic Trim Tab Kit, 12 x 9 Inch, Euro-Style Rocker Switch Control","description":"\u003cp\u003eThe Bennett 129E is a complete hydraulic trim tab kit built for boats that stay in the water and need reliable, high-speed performance under demanding marine conditions. As a boat accelerates, the bow rises, creating hull drag that cuts into fuel efficiency; this kit gets the boat on plane faster and keeps it planing at intermediate speeds, reducing that drag and improving fuel economy. The trim tabs can also be used to correct uneven loads and listing, giving the helm more precise control over ride attitude.\u003c\/p\u003e\u003cp\u003eEach Bennett trim tab is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion, so the tabs are built for long-term durability with minimal maintenance. The kit includes two Bennett hydraulic actuators, strong, flexible nylon\/fiberglass hydraulic cylinders that push the tabs into position. All hydraulic lines and wires are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments. Control comes from an included ES2000 Euro-style rocker switch, a straightforward two-position control for precise, on-the-fly trim adjustment.\u003c\/p\u003e\u003cp\u003eThis 129E kit is sized with 12 inch wide by 9 inch deep trim tab blades and is intended for boats from 16 to 25 feet, and is well suited to flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers. Everything needed for a complete installation is included, backed by a limited lifetime warranty on the trim tab hardware.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 129E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Euro-Style Rocker Switch (ES2000)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Length Fitment:\u003c\/strong\u003e 16 feet to 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e A1101A (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285101605\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50000-77-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 16 feet to 25 feet\u003c\/li\u003e\n\u003cli\u003eWell suited to flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett 129E Hydraulic Trim Tab Kit designed to do?\u003c\/strong\u003e The Bennett 129E is designed to improve boat performance, handling, and ride quality across changing load, speed, and water conditions. It helps a boat get on plane faster, reduces hull drag, improves fuel efficiency, and corrects listing or uneven loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades in the Bennett 129E kit?\u003c\/strong\u003e The trim tab blades in the Bennett 129E kit measure 12 inches wide by 9 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the Bennett 129E recommended for?\u003c\/strong\u003e The Bennett 129E is recommended for boats 16 feet to 25 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included in the Bennett 129E trim tab kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two A1101A hydraulic actuators, one V351HPU hydraulic power unit, one ES2000 Euro-style rocker switch, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett 129E come with a control switch?\u003c\/strong\u003e Yes, the Bennett 129E includes an ES2000 Euro-style rocker switch for control at the helm, providing precise, on-the-fly trim adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the hydraulic lines and wires protected on this trim tab system?\u003c\/strong\u003e On the Bennett 129E, all hydraulic lines and wires are routed internally and concealed by the upper hinge, keeping them shielded from harsh marine environments and improving long-term durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the Bennett 129E trim tabs made from?\u003c\/strong\u003e The Bennett 129E trim tabs are stainless steel, and each tab is sheared and bent rather than welded, since welding alters the properties of stainless steel and can invite corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the Bennett 129E trim tab kit?\u003c\/strong\u003e The Bennett 129E hydraulic trim tab hardware is backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hydraulic actuators used in the Bennett 129E kit?\u003c\/strong\u003e The Bennett 129E kit uses two A1101A hydraulic actuators, which are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hydraulic tubing included with the Bennett 129E kit?\u003c\/strong\u003e The Bennett 129E kit includes 20 feet of hydraulic tubing along with the hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett 129E also sold under a Yamaha part number?\u003c\/strong\u003e Yes, the Bennett 129E hydraulic trim tab kit corresponds to Yamaha part number 6BT-50000-77-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat benefits does the Bennett 129E provide once installed?\u003c\/strong\u003e Once installed, the Bennett 129E can increase speed, improve visibility and safety, get a boat on plane faster, improve fuel efficiency, and provide precise, accurate trim control.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449749723,"sku":"BEN-129E","price":842.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-129E-Hydraulic-Trim-Tab-Kit-12-inch-by-9-inch-with-Euro-Style-Controls__68381.1739459283.500.750.jpg?v=1785163386"},{"product_id":"bennett-189e-hydraulic-trim-tab-kit-18-x-9-inch-euro-style-controls-fits-boats-22-to-30-feet","title":"Bennett 189E Hydraulic Trim Tab Kit, 18 x 9 Inch, Euro Style Controls, Fits Boats 22 to 30 Feet","description":"\u003cp\u003eThe Bennett 189E Hydraulic Trim Tab Kit is an 18 inch by 9 inch hydraulic trim tab system built for boats that stay in the water and see high-speed action under demanding marine conditions. Trim tabs correct the bow rise that happens under acceleration, cutting hull drag so the boat gets on plane faster, runs on plane at intermediate speeds, and burns less fuel. They also let the operator correct uneven loading and listing for a more level, stable ride.\u003c\/p\u003e\u003cp\u003eEach trim tab blade is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion; the result is a low-maintenance blade built for long-term service. The kit includes two Bennett A1101A hydraulic actuators, flexible nylon\/fiberglass hydraulic cylinders that push the tabs into position, with all hydraulic lines and wiring routed internally and concealed by the upper hinge so they are not exposed to the elements. Control is handled by an included Euro-Style Rocker Switch (ES2000) for simple, direct onboard operation.\u003c\/p\u003e\u003cp\u003eThis kit is recommended for boats 22 feet to 30 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers. It is backed by a limited lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500018700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e 189E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Euro-Style Rocker Switch (ES2000)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 22 feet to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators:\u003c\/strong\u003e 2 Bennett A1101A hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim tab blades with nylon\/fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 25 inches L x 15 inches W x 5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285105603\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 22 feet to 30 feet\u003c\/li\u003e\n\u003cli\u003eSuited to flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Bennett 189E Hydraulic Trim Tab Kit?\u003c\/strong\u003e The Bennett 189E kit uses an 18 inch wide by 9 inch deep trim tab blade on each side of the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit recommended for?\u003c\/strong\u003e This kit is recommended for boats 22 feet to 30 feet, including flats boats, center consoles, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included in the Bennett 189E kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two Bennett A1101A hydraulic actuators, one V351HPU hydraulic power unit, one ES2000 Euro-Style Rocker Switch, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Euro-Style control work on this kit?\u003c\/strong\u003e The Bennett 189E is operated with an included Euro-Style Rocker Switch (ES2000), giving direct onboard control of tab position rather than an automated indicator display.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the trim tab blades made of?\u003c\/strong\u003e The blades on the Bennett 189E kit are stainless steel, sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use hydraulic trim tabs on a boat?\u003c\/strong\u003e Trim tabs correct the bow rise that occurs under acceleration, reducing hull drag so the boat reaches plane faster, runs efficiently at intermediate speeds, and can also correct uneven loading or listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hydraulic lines exposed on the Bennett 189E actuators?\u003c\/strong\u003e No, on the Bennett A1101A actuators used in this kit all hydraulic lines and wiring are routed internally and concealed by the upper hinge, keeping them out of harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett 189E Hydraulic Trim Tab Kit?\u003c\/strong\u003e The Bennett 189E Hydraulic Trim Tab Kit is backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett 189E trim tab kit weigh?\u003c\/strong\u003e The complete Bennett 189E Hydraulic Trim Tab Kit weighs 27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from Bennett's All-in-One Indicator Control kits?\u003c\/strong\u003e The Bennett 189E kit uses a Euro-Style Rocker Switch for direct manual control, while Bennett's All-in-One Indicator Control kits add a stand-alone helm display with all-up\/all-down buttons and automatic tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hydraulic tubing included with the kit?\u003c\/strong\u003e The Bennett 189E kit includes 20 feet of hydraulic tubing for connecting the power unit to the trim tab actuators.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449880795,"sku":"BEN-189E","price":902.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-189E-Hydraulic-Trim-Tab-Kit-18-inch-by-9-inch-with-Euro-Style-Controls__64383.1739477217.500.750.jpg?v=1785163386"},{"product_id":"bennett-marine-24-x-12-inch-hydraulic-trim-tab-kit-with-all-in-one-indicator-control-6bt501109100","title":"Bennett Marine 24 x 12 Inch Hydraulic Trim Tab Kit with All-in-One Indicator Control, 6BT501109100","description":"\u003cp\u003eThis Bennett Marine hydraulic trim tab kit gives boaters 24 inch wide by 12 inch deep trim tab planes paired with an All-in-One Indicator Control unit at the helm. Hydraulic trim tabs like these help a boat get on plane faster and stay on plane at intermediate speeds, which reduces hull drag from bow rise and improves fuel efficiency. They also let the operator correct listing and uneven loads, reduce pounding, and eliminate porpoising for a smoother, safer ride.\u003c\/p\u003e\u003cp\u003eThe kit uses Bennett's exclusive transom mount interlocking tab design with a riveted angle tab style rather than welded construction. Two hydraulic actuators push the tab planes into position, and all hydraulic lines and wiring run internally, concealed by the upper hinge so they are not exposed to harsh marine conditions. The included All-in-One Indicator Control is a stand-alone helm unit with dedicated All Up and All Down buttons and automatic tab retraction that raises the tabs whenever the ignition is powered off, simplifying operation for the boater.\u003c\/p\u003e\u003cp\u003eThe complete kit ships with everything needed for installation: two trim plane assemblies, two A1101A hydraulic trim tab actuators, a V351HPU1 hydraulic power unit, and hydraulic tubing and hardware. The trim tab hardware is backed by a limited lifetime warranty, and the All-in-One Indicator Control carries a 3 year warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT501109100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e All-in-One Indicator Control (OBI9000H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab Design:\u003c\/strong\u003e Exclusive transom mount interlocking tab design, riveted angle tab style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e (2) A1101A hydraulic trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 38 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Warranty:\u003c\/strong\u003e Limited lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Warranty:\u003c\/strong\u003e 3 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab planes in this Bennett kit?\u003c\/strong\u003e The trim tab planes on the Bennett 6BT501109100 kit measure 24 inches wide by 12 inches deep, sized to give larger boats more surface area for planing and load correction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a helm control unit?\u003c\/strong\u003e Yes, the Bennett 6BT501109100 hydraulic trim tab kit includes an All-in-One Indicator Control unit with dedicated All Up and All Down buttons and automatic tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators and power unit come with this trim tab kit?\u003c\/strong\u003e Two Bennett A1101A hydraulic trim tab actuators are included, along with a V351HPU1 hydraulic power unit and the hydraulic tubing and hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hydraulic tubing and wiring exposed to the elements?\u003c\/strong\u003e No. On the Bennett 6BT501109100 kit, all hydraulic lines and wires run internally and are concealed by the upper hinge, protecting them from harsh marine conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e The Bennett 6BT501109100 hydraulic trim tab kit weighs 35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of this kit?\u003c\/strong\u003e This trim tab kit ships in a package measuring 38 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to this trim tab kit?\u003c\/strong\u003e The trim tab hardware on the Bennett 6BT501109100 kit carries a limited lifetime warranty, while the included All-in-One Indicator Control is backed by a separate 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of tab design does this kit use?\u003c\/strong\u003e It uses Bennett's exclusive transom mount interlocking tab design with a riveted angle tab style, rather than a welded construction that can invite corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit correct uneven loads on my boat?\u003c\/strong\u003e Yes. Beyond getting the boat on plane faster, the tab planes on the Bennett 6BT501109100 kit can be adjusted to correct listing and uneven weight distribution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The complete Bennett 6BT501109100 kit includes two trim plane assemblies, two A1101A hydraulic actuators, one V351HPU1 hydraulic power unit, hydraulic tubing and hardware, and the All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the All-in-One control differ from a standard rocker switch control?\u003c\/strong\u003e The All-in-One Indicator Control included with this kit is a stand-alone helm unit with dedicated All Up and All Down buttons and auto tab retraction, rather than a simple manual rocker switch used on Bennett's Euro-style controlled kits.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449913563,"sku":"BEN-2412OBI","price":1301.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-2412OBI-24-inch-by-12-inch-Hydraulic-Trim-Tab-Kit-with-All-in-One-Control__10142.1739477218.500.750.jpg?v=1785163386"},{"product_id":"bennett-marine-hydraulic-trim-tab-kit-24-x-9-inch-euro-style-control-part-6bt500028900","title":"Bennett Marine Hydraulic Trim Tab Kit, 24 x 9 Inch, Euro-Style Control, Part 6BT500028900","description":"\u003cp\u003eThis Bennett Marine hydraulic trim tab kit gives boaters precise control over running attitude, helping the boat get on plane faster and stay on plane at intermediate speeds. As a boat accelerates, the bow rises and creates hull drag that cuts fuel efficiency; this trim tab kit corrects that lift and also lets the operator compensate for uneven loads from passengers, fuel, or gear. The kit includes two Bennett hydraulic actuators, which are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position. All hydraulic lines and wiring are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments. Control is handled through an ES2000 Euro-Style Rocker Switch, giving the operator direct, responsive command of each tab.\u003c\/p\u003e\u003cp\u003eEach trim tab blade measures 24 inches wide by 9 inches deep and is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion; this construction method keeps maintenance low and extends service life. The kit is recommended for boats from 26 feet to 40 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers. Everything needed for a full installation is included, from the trim plane assemblies to the hydraulic power unit and tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500028900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Style:\u003c\/strong\u003e Euro-Style Rocker Switch (ES2000)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 26 feet to 40 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 30 inches L x 15 inches W x 5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim tab blades; nylon\/fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 trim plane assemblies, 2 A1101A hydraulic actuators, 1 hydraulic power unit, 1 ES2000 Euro-Style Rocker Switch, 1 hardware bag, 20 feet of hydraulic tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tabs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades in this Bennett kit?\u003c\/strong\u003e The blades in the Bennett Hydraulic Trim Tab Kit (part 6BT500028900) measure 24 inches wide by 9 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a control switch?\u003c\/strong\u003e Yes, the kit comes with an ES2000 Euro-Style Rocker Switch for direct control of the trim tabs, along with 20 feet of hydraulic tubing to connect it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit recommended for?\u003c\/strong\u003e This kit is recommended for boats from 26 feet to 40 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes 2 trim plane assemblies, 2 A1101A hydraulic actuators, 1 hydraulic power unit, the ES2000 Euro-Style Rocker Switch, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hydraulic actuators made of?\u003c\/strong\u003e The two hydraulic actuators included with this Bennett trim tab kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the trim tab blades welded together?\u003c\/strong\u003e No, the blades on this Bennett trim tab kit are sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the complete trim tab kit weigh?\u003c\/strong\u003e The Bennett Hydraulic Trim Tab Kit (6BT500028900) weighs 28 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hydraulic wiring exposed to water and weather?\u003c\/strong\u003e No, all hydraulic lines and wiring on this kit are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this trim tab kit?\u003c\/strong\u003e The Bennett trim tabs in this kit are backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit differ from Bennett's All-in-One control kit?\u003c\/strong\u003e This 24 x 9 inch kit (6BT500028900) uses an ES2000 Euro-Style Rocker Switch for control, while Bennett's separate 24 x 12 inch kit uses an All-in-One Indicator Control with auto tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab kit help with fuel efficiency?\u003c\/strong\u003e Yes, by getting the boat on plane quickly this kit reduces hull drag, which helps improve fuel efficiency and also allows correction of uneven loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete trim tab system or a single replacement part?\u003c\/strong\u003e This is a complete hydraulic trim tab kit, not a single replacement part, and includes both trim plane assemblies and the actuators, power unit, and control switch needed for a full installation.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449946331,"sku":"BEN-249E","price":933.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-249E-Hydraulic-Trim-Tab-Kit-24-inch-by-9-inch-with-Euro-Style-Controls__58315.1739477217.500.750.jpg?v=1785163386"},{"product_id":"bennett-6bt500843500-hydraulic-trim-tab-actuator-13-75-inch-for-standard-and-sport-trim-tab-systems","title":"Bennett 6BT500843500 Hydraulic Trim Tab Actuator, 13.75 Inch, for Standard and Sport Trim Tab Systems","description":"\u003cp\u003eThe Bennett 6BT500843500 is a 13.75-inch standard-size hydraulic trim tab actuator built as a direct replacement for worn or malfunctioning trim tab cylinders on Bennett standard and sport tab units. It works together with your boat's hydraulic power unit to provide precise control over trim tab movement, letting you adjust your vessel's pitch axis based on speed, weight distribution, and water conditions.\u003c\/p\u003e\u003cp\u003eAs part of the actuator's role in your trim tab system, it helps stabilize the boat by counteracting aerodynamic forces while underway and by supporting more efficient engine operation. Proper trim tab adjustment through this actuator can improve stability, handling, and ride quality, in addition to helping the boat get on plane more efficiently. This is a standard-size unit; Bennett also offers the A1101A as the standard configuration alongside an external-line version for installations where the transom interior is inaccessible, and a compact version for space-limited installations, so it is worth confirming your current actuator style before ordering.\u003c\/p\u003e\u003cp\u003eThis is a replacement hydraulic actuator only, not a complete trim tab kit or hydraulic power unit. It is intended for boaters replacing an existing worn or failing actuator on a compatible Bennett trim tab setup rather than installing trim tabs for the first time.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500843500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon and fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Standard and sport trim tab units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285314500\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for standard and sport tab units. Review your current trim tab setup and actuator requirements to confirm compatibility before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett 6BT500843500 trim tab actuator do?\u003c\/strong\u003e This hydraulic trim tab actuator works with your boat's hydraulic power unit to control trim tab movement, adjusting your boat's pitch based on speed, load distribution, and water conditions for improved handling and performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full trim tab system or a replacement part?\u003c\/strong\u003e The Bennett 6BT500843500 is a replacement hydraulic actuator only, not a complete trim tab system. It is meant to replace a worn or malfunctioning trim tab cylinder on a compatible Bennett setup, not to install trim tabs for the first time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trim tab systems is this actuator designed for?\u003c\/strong\u003e This actuator is designed for standard and sport tab units. Check your current trim tab setup and actuator requirements before ordering to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the Bennett 6BT500843500 actuator?\u003c\/strong\u003e It measures 13.75 inches, making it a standard-size hydraulic actuator for Bennett trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab actuator weigh?\u003c\/strong\u003e The Bennett 6BT500843500 hydraulic trim tab actuator weighs 1.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this actuator made from?\u003c\/strong\u003e The Bennett 6BT500843500 is built as a nylon and fiberglass hydraulic cylinder, described by Bennett as strong but flexible for marine trim tab use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this actuator improve boat performance?\u003c\/strong\u003e By providing precise trim tab control, this actuator helps manage your boat's running attitude, which can improve stability, handling, ride quality, and overall engine efficiency.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this actuator include external hydraulic hoses?\u003c\/strong\u003e No. This standard actuator design routes fluid through a concealed passage in the upper hinge, so hydraulic lines are not exposed as external hoses subject to damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other versions of this Bennett actuator?\u003c\/strong\u003e Yes. The 6BT500843500 is the standard-size actuator; Bennett also makes an external-line version for installations where the inside of the transom is inaccessible, and a compact version for space-limited installations, so confirm which style your boat needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this actuator work on its own or does it need other components?\u003c\/strong\u003e This actuator works together with your boat's existing hydraulic power unit to move the trim tabs; it is a replacement cylinder and is not a standalone power source.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449979099,"sku":"BEN-A1101A","price":106.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/A1101__44247.1737829694.500.750.jpg?v=1785163390"},{"product_id":"bennett-marine-actuator-upper-hinge-6bt500057800-for-trim-tab-actuators","title":"Bennett Marine Actuator Upper Hinge 6BT500057800 for Trim Tab Actuators","description":"\u003cp\u003eThe Bennett Marine Actuator Upper Hinge (6BT500057800) is a direct replacement upper hinge for Bennett trim tab hydraulic actuators. It serves as the connection point where the actuator attaches to its mounting position, allowing the actuator to pivot as it extends and retracts to move the trim tabs. This hinge is designed for boat owners and installers replacing a worn, cracked, or damaged upper hinge on an existing Bennett actuator rather than replacing the entire actuator assembly.\u003c\/p\u003e\u003cp\u003eThe hinge includes an O-ring for a proper seal at the mounting point and is built as a universal fit part, so it works across Bennett trim tab actuator systems rather than being limited to one specific model. It uses a face mount design and measures approximately 6 inches by 5 inches, keeping the footprint compact for transom-area installation. At 1 pound, it is a lightweight hardware component intended to restore proper actuator movement and hydraulic sealing without the cost of a full actuator replacement.\u003c\/p\u003e\u003cp\u003eBecause this hinge is a wear component on an actuator that sees constant movement and marine exposure, replacing it when it becomes worn, loose, or cracked helps prevent hydraulic fluid loss and restores smooth, controlled trim tab operation. It is backed by Bennett Marine's manufacturer limited warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500057800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Actuator Upper Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e O-ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Face Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6 inches L x 5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a universal fit hinge for Bennett trim tab actuator systems and is not limited to a single actuator model.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett Actuator Upper Hinge 6BT500057800 used for?\u003c\/strong\u003e It is a replacement upper hinge for Bennett trim tab hydraulic actuators, serving as the pivot connection point where the actuator mounts and moves as it extends and retracts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hinge include the O-ring?\u003c\/strong\u003e Yes, the 6BT500057800 upper hinge comes with an O-ring included for proper sealing at the mounting connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this hinge fit my Bennett trim tab actuator?\u003c\/strong\u003e The 6BT500057800 is a universal fit part designed to work across Bennett trim tab actuator systems rather than one specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this actuator hinge?\u003c\/strong\u003e The Bennett Actuator Upper Hinge measures approximately 6 inches long by 5 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 6BT500057800 actuator hinge weigh?\u003c\/strong\u003e This hinge weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full actuator replacement or just the hinge?\u003c\/strong\u003e This product is only the upper hinge component, not a complete actuator assembly, and is intended for replacing a worn or damaged hinge on an existing Bennett actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mounting style does this hinge use?\u003c\/strong\u003e The Bennett 6BT500057800 upper hinge uses a face mount design for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish does the hinge come in?\u003c\/strong\u003e The hinge has an unfinished surface finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the upper hinge on my Bennett actuator?\u003c\/strong\u003e A worn, cracked, or loose upper hinge on a Bennett actuator can lead to hydraulic fluid loss and reduced trim tab control, and replacing it with the 6BT500057800 hinge restores proper sealing and movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett Actuator Upper Hinge covered by a warranty?\u003c\/strong\u003e Yes, the 6BT500057800 hinge is backed by Bennett Marine's manufacturer limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the O-ring the only seal included with this hinge?\u003c\/strong\u003e The 6BT500057800 upper hinge includes one O-ring as its included sealing component.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450011867,"sku":"BEN-A1103","price":21.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/A1103__97894.1722347095.500.750.jpg?v=1785163390"},{"product_id":"bennett-marine-actuator-lower-hinge-with-pin-stainless-steel-pin-part-6bt500058700","title":"Bennett Marine Actuator Lower Hinge with Pin, Stainless Steel Pin, Part 6BT500058700","description":"\u003cp\u003eThis is the Bennett Marine Actuator Lower Hinge with Pin, a replacement lower hinge assembly for Bennett trim tab actuators. It serves as the lower hinge connection point on the actuator, allowing the piston-like arm of the actuator to pivot as it pushes the trim tab into position. The hinge is supplied with its own stainless steel lower hinge pin, so the pin does not need to be sourced separately when replacing this component.\u003c\/p\u003e\u003cp\u003eThe hinge pin is made from stainless steel for corrosion resistance in the marine environment, while the overall part is a metal component finished in black with an unfinished surface treatment. It is compact, measuring 0.6 inches long by 2.5 inches wide, and weighs 1 pound. This is a replacement part only, not a complete actuator assembly, so it should be matched against your current Bennett actuator and trim tab setup before ordering to confirm it is the correct component for your repair. The part is manufactured in the United States.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500058700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Actuator Lower Hinge with Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinge Pin Material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Unfinished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 0.6 inches L x 2.5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285315705\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned as a replacement part for Bennett trim tab actuators. Check your existing actuator model and trim tab setup to confirm compatibility before ordering.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo specific OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett Actuator Lower Hinge with Pin used for?\u003c\/strong\u003e It serves as the lower hinge connection point on a Bennett trim tab actuator, allowing the actuator's piston-like arm to pivot as it moves the trim tab into position. The Bennett Actuator Lower Hinge with Pin is a replacement part used on Bennett trim tab actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a replacement part or a complete actuator?\u003c\/strong\u003e This is a replacement lower hinge with pin, not a complete actuator assembly. Review your current Bennett trim tab actuator and replacement needs before ordering this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the hinge come with the pin included?\u003c\/strong\u003e Yes, the Bennett Actuator Lower Hinge includes the lower hinge along with a stainless steel lower hinge pin as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hinge pin made from?\u003c\/strong\u003e The lower hinge pin is made from stainless steel, chosen for corrosion-resistant performance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trim tab systems is this hinge designed for?\u003c\/strong\u003e This hinge is designed as a replacement part for Bennett trim tab actuators. Check your existing actuator model and trim tab setup to confirm compatibility before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Bennett Actuator Lower Hinge?\u003c\/strong\u003e It is finished in black with an unfinished surface treatment on the metal body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this hinge?\u003c\/strong\u003e The Bennett Actuator Lower Hinge with Pin measures 0.6 inches long by 2.5 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett Actuator Lower Hinge with Pin weigh?\u003c\/strong\u003e It weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Bennett Marine part?\u003c\/strong\u003e Yes, this hinge is manufactured by Bennett Marine as an authentic replacement component for Bennett trim tab actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this part?\u003c\/strong\u003e The package includes the lower hinge and its stainless steel lower hinge pin as a single replacement unit, part number 6BT500058700.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Bennett Actuator Lower Hinge with Pin made?\u003c\/strong\u003e This part is made in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this hinge on any trim tab brand?\u003c\/strong\u003e This hinge is designed as a replacement part specifically for Bennett trim tab actuators, so compatibility with other brands is not established; confirm your current Bennett actuator model before ordering.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450274011,"sku":"BEN-A1114","price":10.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/A1114__10822.1737835287.500.750.jpg?v=1785163391"},{"product_id":"bennett-pro-auto-trim-tab-switch-for-bolt-electric-trim-tab-systems-12v","title":"Bennett Pro Auto Trim Tab Switch for BOLT Electric Trim Tab Systems, 12V","description":"\u003cp\u003eThe Bennett Pro Auto Trim Tab Switch is an all-in-one trim tab control keypad built for BOLT electric trim tab systems, combining automatic trim tab control, manual trim tab control, and trim tab position indication in a single space-saving unit. Once set, it automatically adjusts the boat's trim tabs to level pitch and roll as speed, sea conditions, and weight distribution change, working much like cruise control for your tabs. Full manual command is always available at the touch of a button, including one-touch buttons for full up (running in a following sea or coming into the beach) and full down (hole-shot).\u003c\/p\u003e\u003cp\u003eThe switch stores 2 favorite automatic running attitudes in memory and displays real-time AutoTrim Pro adjustments and trim tab position through LED indicators with adjustable light intensity. Response time is OEM customizable, so it can be configured to match engine power, hull type, actuator type, or trim tab size. When the boat's ignition is switched off, automatic tab retraction returns the trim tabs to the full up position. Installation uses plug and play waterproof snap-on connectors for straightforward assembly, and the system is fully compatible with all Bennett systems as well as most other electric trim tab systems. The switch ships with the ATP control unit, ATP helm display, and plug-and-play waterproof connectors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500956600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e BOLT Electric Trim Tab Systems; also compatible with most other electric trim tab systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Automatic and manual trim tab control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition Indication:\u003c\/strong\u003e LED indicators with adjustable light intensity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse Time:\u003c\/strong\u003e OEM customizable (adjustable for engine power, hull type, actuator type, or trim tab size)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory Settings:\u003c\/strong\u003e Stores 2 favorite automatic running attitudes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetraction:\u003c\/strong\u003e Automatic tab retraction to full up position at ignition off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Plug and play waterproof snap-on connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e ATP control unit, ATP helm display, plug and play waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285202067\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett Pro Auto Trim Tab Switch do?\u003c\/strong\u003e It is an all-in-one trim tab control system that combines automatic trim tab control, manual trim tab control, and trim tab position indication in a single space-saving keypad, automatically adjusting trim tab position to help level the boat's pitch and roll as conditions change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch work with a trim tab system that isn't made by Bennett?\u003c\/strong\u003e Yes, the Bennett Pro Auto Trim Tab Switch is fully compatible with all Bennett systems and most other electric trim tab systems, though it's designed for BOLT electric trim tab systems, so it's worth reviewing your current setup before ordering to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I take manual control of the trim tabs instead of running them automatically?\u003c\/strong\u003e Yes, full manual control is available at any time with the touch of a button, and the Bennett Pro Auto Trim Tab Switch also includes one-touch manual full up and full down buttons for quick adjustments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many automatic trim settings can be saved?\u003c\/strong\u003e The Bennett Pro Auto Trim Tab Switch lets you store 2 favorite automatic running attitudes in memory for quick recall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the trim tabs retract automatically when the boat is shut off?\u003c\/strong\u003e Yes, automatic tab retraction returns the trim tabs to the full up position when the boat's ignition is switched off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the Bennett Pro Auto Trim Tab Switch?\u003c\/strong\u003e It ships with the ATP control unit, ATP helm display, and plug-and-play waterproof connectors needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch show the current position of the trim tabs?\u003c\/strong\u003e Yes, LED indicators with adjustable light intensity display real-time trim tab position and AutoTrim Pro adjustments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the Bennett Pro Auto Trim Tab Switch designed for?\u003c\/strong\u003e This switch is a 12V trim tab control unit built for BOLT electric trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the response time be adjusted for my boat?\u003c\/strong\u003e Yes, the response time is OEM customizable and can be configured to match engine power, hull type, actuator type, or trim tab size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this switch and the Bennett Hydraulic Pro Auto Trim Tab Switch?\u003c\/strong\u003e The Bennett Pro Auto Trim Tab Switch (6BT500956600) is built for BOLT electric trim tab systems, while the Bennett Hydraulic Pro Auto Trim Tab Switch adds compatibility with hydraulic trim tab systems as well as electric ones; both offer the same automatic control, manual override, and LED position indication features.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are the wiring connections protected from water?\u003c\/strong\u003e The Bennett Pro Auto Trim Tab Switch uses plug and play waterproof snap-on connectors, making assembly straightforward while protecting the wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett Pro Auto Trim Tab Switch weigh?\u003c\/strong\u003e The switch weighs 5 pounds.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450208475,"sku":"BEN-AP000A1BC","price":761.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-AP00A1BC__27240.1739462525.500.750.jpg?v=1785163391"},{"product_id":"bennett-a-1115-actuator-lower-hinge-pin-for-trim-tab-actuators","title":"Bennett A-1115 Actuator Lower Hinge Pin for Trim Tab Actuators","description":"\u003cp\u003eThe Bennett A-1115 Actuator Lower Hinge Pin is a replacement lower hinge pin for Bennett trim tab actuators. Bennett actuators are built as strong but flexible nylon\/fiberglass hydraulic cylinders, and their piston-like arms push the trim tabs into position as hydraulic pressure is applied. A key design feature of the Bennett actuator is that fluid flows through a concealed hole in the upper hinge at the top of the actuator, which eliminates the need for external hoses that would otherwise be subject to damage. The lower hinge pin is the pivot point at the base of the actuator assembly, allowing the actuator to move as the trim tab is raised and lowered.\u003c\/p\u003e\u003cp\u003eBennett offers its actuators in a few configurations to suit different installation needs: the A1101A is the standard actuator, the A1101EX is built with an external line connection for situations where the interior of the transom is totally inaccessible, and the A1200S is designed for installations where space is limited. The A-1115 lower hinge pin is a maintenance and repair part for keeping an existing Bennett actuator in working order without replacing the entire assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e A-1115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Actuator Lower Hinge Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285315804\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBennett trim tab actuators\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNot specified\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett A-1115 Actuator Lower Hinge Pin used for?\u003c\/strong\u003e The Bennett A-1115 is a lower hinge pin used to service and repair Bennett trim tab actuators, providing the pivot point at the base of the actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the A-1115 a complete actuator or a repair part?\u003c\/strong\u003e It is a repair part, not a complete actuator. The Bennett A-1115 replaces just the lower hinge pin on an existing Bennett actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do Bennett actuators route fluid through the upper hinge instead of external hoses?\u003c\/strong\u003e Bennett actuators are designed with a concealed fluid passage through the upper hinge at the top of the actuator, which eliminates external hoses that would otherwise be exposed to damage. The A-1115 lower hinge pin services the opposite end of this same actuator design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are Bennett actuators made from?\u003c\/strong\u003e Bennett actuators, which the A-1115 lower hinge pin services, are built as strong but flexible nylon\/fiberglass hydraulic cylinders with piston-like arms that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the A1101A, A1101EX, and A1200S Bennett actuators?\u003c\/strong\u003e The A1101A is Bennett's standard actuator, the A1101EX uses an external line connection for cases where the inside of the transom is totally inaccessible, and the A1200S is designed for installations where space is limited. The A-1115 lower hinge pin is a service part for the Bennett actuator line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett A-1115 Actuator Lower Hinge Pin weigh?\u003c\/strong\u003e The Bennett A-1115 Actuator Lower Hinge Pin weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes replacing the lower hinge pin require removing the whole actuator?\u003c\/strong\u003e The A-1115 is intended to service the lower hinge of an existing Bennett actuator; review your current trim tab actuator setup and replacement needs before ordering to confirm the correct repair approach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the product UPC for the Bennett A-1115 hinge pin?\u003c\/strong\u003e The Bennett A-1115 Actuator Lower Hinge Pin carries UPC 666285315804.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the A-1115 fit any Bennett actuator model?\u003c\/strong\u003e The A-1115 is designed as a lower hinge pin for Bennett trim tab actuators; check your existing actuator model, such as the A1101A, A1101EX, or A1200S, before ordering to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat function does the lower hinge pin serve on a Bennett actuator?\u003c\/strong\u003e The lower hinge pin, such as the Bennett A-1115, forms the pivot connection at the base of the actuator, allowing the piston-like arm to move as it pushes the trim tab into position.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450241243,"sku":"BEN-A1115","price":1.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/A1115__02077.1737829815.500.750.jpg?v=1785163391"},{"product_id":"bennett-hydraulic-pro-auto-trim-tab-switch-part-6bt500956500-for-electric-or-hydraulic-trim-tab-systems","title":"Bennett Hydraulic Pro Auto Trim Tab Switch, Part 6BT500956500, for Electric or Hydraulic Trim Tab Systems","description":"\u003cp\u003eThe Bennett Hydraulic Pro Auto Trim Tab Switch is an all-in-one trim tab control keypad that combines automatic trim tab control, manual trim tab control, and trim tab position indication in a single space-saving unit. Acting like cruise control for your trim tabs, it automatically levels the pitch and roll of the boat, adjusting the tabs as vessel speed, sea conditions, and weight distribution change, while still letting the operator take full manual command at any time with the touch of a button. This switch is an affordable upgrade that can be added to most existing trim tab systems, electric or hydraulic, and is fully compatible with all Bennett systems as well as most other trim tab setups. Installation is simple and straightforward.\u003c\/p\u003e\u003cp\u003eKey functions include auto trim tab control with memory storage for two favorite running attitudes, real-time AutoTrim Pro adjustment indication via LED, manual tab control with automatic override activated by pressing anywhere on the bow up or down buttons, and OEM-customizable response time so the system can be tuned to engine power, hull type, actuator type, or trim tab size. Trim tab position is shown through LED indicators with adjustable light intensity, and one-touch manual full up and full down buttons make it easy to go down for hole-shot or up for running in a following sea or coming into the beach. An automatic tab retraction feature returns the tabs to the full up position whenever the boat's ignition is switched off, helping protect the tabs during storage and trailering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500956500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Electric or hydraulic trim tab systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285202050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eCompatible with most existing electric or hydraulic trim tab systems; fully compatible with all Bennett trim tab systems and most other brands.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett Hydraulic Pro Auto Trim Tab Switch do?\u003c\/strong\u003e It is an all-in-one trim tab control system that combines automatic trim tab control, manual trim tab control, and trim tab position indication in a single space-saving keypad, automatically leveling the boat's pitch and roll as speed and sea conditions change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this switch work with a hydraulic trim tab system?\u003c\/strong\u003e Yes, the Bennett Hydraulic Pro Auto Trim Tab Switch (6BT500956500) can be added to most existing trim tab systems, whether electric or hydraulic, and is fully compatible with all Bennett systems and most others.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I still control the trim tabs manually with this switch?\u003c\/strong\u003e Yes. In addition to automatic control, the Bennett Hydraulic Pro switch allows full manual control at any time with the touch of a button, and includes one-touch manual full up and full down buttons for quick adjustments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the automatic leveling feature work?\u003c\/strong\u003e The Bennett Hydraulic Pro's AutoTrim Pro function automatically adjusts trim tab position to level the boat's pitch and roll as vessel speed, sea conditions, and weight distribution shift, and it can store two favorite automatic running attitudes in memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch show trim tab position?\u003c\/strong\u003e Yes, the switch is equipped with LED indicators with adjustable light intensity that show trim tab position, along with real-time indication of AutoTrim Pro adjustments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the trim tabs when the ignition is turned off?\u003c\/strong\u003e The Bennett Hydraulic Pro Auto Trim Tab Switch includes automatic tab retraction, which returns the trim tabs to the full up position whenever the boat's ignition is switched off, helping protect them during storage and trailering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the response time of the trim tab system be adjusted?\u003c\/strong\u003e Yes, the Bennett Hydraulic Pro switch offers OEM customizable response time so it can be configured to match engine power, hull type, actuator type, or trim tab size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett Hydraulic Pro Auto Trim Tab Switch weigh?\u003c\/strong\u003e The Bennett Hydraulic Pro Auto Trim Tab Switch, part number 6BT500956500, weighs 5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Bennett Hydraulic Pro Auto Trim Tab Switch?\u003c\/strong\u003e This switch is finished in beige.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of this trim tab switch complicated?\u003c\/strong\u003e No, Bennett describes installation of the Hydraulic Pro Auto Trim Tab Switch as simple and straightforward.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450306779,"sku":"BEN-AP000A1HA","price":761.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-AP000A1HA__44638.1722478465.500.750.jpg?v=1785163391"},{"product_id":"bennett-auto-trim-tab-retractor-6bt500096600-for-hydraulic-trim-tab-systems","title":"Bennett Auto Trim Tab Retractor 6BT500096600 for Hydraulic Trim Tab Systems","description":"\u003cp\u003eThe Bennett Auto Trim Tab Retractor (6BT500096600) is an add-on accessory for hydraulic trim tab systems that automatically retracts the trim tabs to the full up position whenever the boat's ignition is switched off. Wired between the trim tab control and the engine ignition switch, it relieves hydraulic pressure on the actuating cylinders when the tabs are not in use and helps prevent trim tab damage while the boat is trailered or stored in a dry rack. It also helps protect the actuating cylinder from unnecessary marine growth by keeping it retracted between outings. For boats that are not equipped with trim tab position indicators, the retractor gives an added layer of assurance that the tabs are fully up every time the boat is started, reducing the risk of the tabs catching on a trailer, fork lift, or storage rack. Installation is straightforward: the unit mounts easily under the instrument panel and connects directly to the existing trim tab control and engine ignition switch, without requiring a separate control panel or major rewiring. It operates on a 12 volt system and is housed in a black plastic enclosure sized for a compact under-panel mount. This retractor is intended as a complement to an existing hydraulic trim tab system rather than a replacement for the primary trim tab control.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500096600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e AR512\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Retractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Hydraulic Trim Tab Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 7 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Under Instrument Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285220009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Bennett Auto Trim Tab Retractor 6BT500096600 is an add-on for hydraulic trim tab systems and is designed to work with Bennett hydraulic trim tab controls.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett Auto Trim Tab Retractor do?\u003c\/strong\u003e It automatically retracts the trim tabs to the full up position whenever the boat's ignition is switched off, so the Bennett Auto Trim Tab Retractor 6BT500096600 helps ensure tabs are not left extended during trailering or storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a standalone trim tab system?\u003c\/strong\u003e No, the 6BT500096600 retractor is an add-on for existing hydraulic trim tab systems, not a complete trim tab kit, and it connects to a trim tab control and engine ignition switch already in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the retractor get installed?\u003c\/strong\u003e It is installed under the instrument panel, where it connects to the trim tab control and the engine ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Bennett Auto Trim Tab Retractor use?\u003c\/strong\u003e It operates on a 12 volt system, matching standard boat electrical setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this help boats without trim tab position indicators?\u003c\/strong\u003e Yes, boats without trim tab indicators benefit from the 6BT500096600 because it ensures the trim tabs are fully retracted every time the boat is started, even without a visual indicator confirming tab position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would trailered boats need an auto trim tab retractor?\u003c\/strong\u003e Trailered or dry-stored boats risk trim tab damage from fork lifts, trailer components, and storage racks if the tabs are left extended; the Bennett Auto Trim Tab Retractor reduces that risk by retracting the tabs automatically at shutdown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the retractor reduce hydraulic pressure when the tabs are idle?\u003c\/strong\u003e Yes, the Bennett Auto Trim Tab Retractor relieves hydraulic pressure on the actuating cylinder when the trim tabs are not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and color is the housing?\u003c\/strong\u003e The unit is housed in black plastic, sized at approximately 6 x 7 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this retractor help prevent marine growth issues?\u003c\/strong\u003e Keeping the trim tabs retracted between outings, as the 6BT500096600 does automatically, helps avoid unnecessary marine growth on the actuating cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bennett Auto Trim Tab Retractor?\u003c\/strong\u003e The 6BT500096600 is the retractor unit itself, designed to wire into an existing hydraulic trim tab control and engine ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a warranty included with this part?\u003c\/strong\u003e Yes, the Bennett Auto Trim Tab Retractor 6BT500096600 comes with a limited warranty.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450339547,"sku":"BEN-AR512","price":87.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ben-ar512_lg__97041.1725456960.500.750.jpg?v=1785163391"},{"product_id":"bennett-marine-bolt-electric-trim-tab-actuator-black-nylon-universal-fit-for-bolt-trim-tab-systems-6bt500120200","title":"Bennett Marine BOLT Electric Trim Tab Actuator, Black Nylon, Universal Fit for BOLT Trim Tab Systems (6BT500120200)","description":"\u003cp\u003eThe Bennett Marine BOLT Electric Trim Tab Actuator is a water-tight, black nylon electric actuator built for Bennett BOLT electric trim tab systems. It is engineered with a seal design that draws on over 50 years of Bennett's experience in trim system design, keeping wiring and internal seals fully protected from the marine environment so the actuator resists leakage and marine growth over time.\u003c\/p\u003e\u003cp\u003eInstallation is fast and straightforward: the actuator arrives ready to mount and does not need to be assembled before it goes on the boat, which keeps replacement or upgrade jobs simple. It is designed to fit Bennett BOLT Electric Trim Tab controls with a universal fit, making it a straightforward match for boats already running a BOLT electric trim tab system, including boats equipped with Bennett's BOLT trim tab kits that use this same actuator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500120200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit Type:\u003c\/strong\u003e Universal Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eUniversal fit for Bennett BOLT Electric Trim Tab control systems\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett BOLT Electric Trim Tab Actuator (6BT500120200) used for?\u003c\/strong\u003e It is the electric actuator that drives a Bennett BOLT electric trim tab system, moving the trim tab up and down in response to the control switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett BOLT Electric Trim Tab Actuator include mounting plates and wiring harnesses?\u003c\/strong\u003e This listing is the actuator itself (part number 6BT500120200); the full Bennett BOLT trim tab kits separately include stainless steel trim planes, mounting plates, and wiring harnesses along with this actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the actuator body made of?\u003c\/strong\u003e The Bennett BOLT Electric Trim Tab Actuator uses a water-tight black nylon housing designed for trouble-free operation in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this actuator work with my existing Bennett BOLT trim tab kit?\u003c\/strong\u003e Yes, the 6BT500120200 actuator is designed with a universal fit for Bennett BOLT Electric Trim Tab controls, making it suitable for replacing an actuator in an existing BOLT system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT Electric Trim Tab Actuator weigh?\u003c\/strong\u003e The actuator weighs 3.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to disassemble the actuator before installing it?\u003c\/strong\u003e No, the Bennett BOLT Electric Trim Tab Actuator installs without needing to be taken apart, which keeps the installation fast and simple.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps this actuator from leaking or growing marine growth over time?\u003c\/strong\u003e Its wires and seals are fully protected from the harsh marine environment, and the seal design is built on Bennett's decades of hydraulic and electric trim system experience to prevent leakage and marine growth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett BOLT Electric Trim Tab Actuator sold as a single unit or a pair?\u003c\/strong\u003e The 6BT500120200 is sold as a single actuator; Bennett BOLT trim tab kits use two of these actuators, one per trim tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this actuator?\u003c\/strong\u003e The Bennett BOLT Electric Trim Tab Actuator is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this actuator replace a failed actuator in a BOLT system without buying a whole new kit?\u003c\/strong\u003e Yes, since 6BT500120200 is the standalone actuator used in Bennett BOLT trim tab kits, it can be purchased on its own to replace a damaged unit rather than replacing the entire kit.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450405083,"sku":"BEN-BEA2000","price":241.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-BEA2000__77569.1725652294.500.750.jpg?v=1785163391"},{"product_id":"bennett-marine-12-x-12-bolt-electric-trim-tab-kit-part-6bt500133800","title":"Bennett Marine 12 x 12 BOLT Electric Trim Tab Kit, Part 6BT500133800","description":"\u003cp\u003eThe Bennett Marine BOLT Electric Trim Tab Kit (part 6BT500133800) is a complete 12 inch by 12 inch trim tab system built to improve ride quality, handling, and performance on trailered boats from 17 to 30 feet. Bennett Marine has manufactured electric trim tabs since 1960 and this BOLT series uses an updated actuator design that addresses the water intrusion and part failures common to older trim tab technology.\u003c\/p\u003e\u003cp\u003eThe kit centers on a water-tight black nylon actuator with wiring routed through the upper hinge, so no wires are ever exposed to the marine environment. The main seal is positioned high on the actuator to further guard against marine growth and water intrusion failures, and the system runs quieter than older-technology competitors. Installation is fast because the actuator arrives fully assembled and does not need to be taken apart before mounting.\u003c\/p\u003e\u003cp\u003eThis kit is best suited to flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is intended for single actuator use per side. Trim tab size is listed in span x chord format: span is the side-to-side measurement and chord is the fore-to-aft measurement, giving this set its 12 inch by 12 inch dimensions. A control switch is required to operate the system and is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500133800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes and mounting plates; black nylon actuator housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 17 to 30 feet, trailered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285600047\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e (2) BEA2000 12-volt trim tab actuators, (2) stainless steel trim planes and mounting plates, (2) 20 ft harnesses with waterproof connectors, 6 ft wire harnesses with waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty for electric actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts; recommended for trailered boats 17 to 30 feet using a single actuator per side.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett Marine 6BT500133800 kit?\u003c\/strong\u003e The trim tabs in this kit measure 12 inches wide by 12 inches deep. Bennett Marine trim tab sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit designed for?\u003c\/strong\u003e This kit is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is recommended for trailered boats from 17 to 30 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this trim tab kit?\u003c\/strong\u003e No. The switch that operates the trim tabs is sold separately from this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part 6BT500133800?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 ft harnesses with waterproof connectors, and 6 ft wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the wiring protected from water intrusion?\u003c\/strong\u003e Wiring is threaded through the upper hinge of the actuator so no wires are exposed to the marine environment, and the main seal is positioned high on the actuator to guard against marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this trim tab system use?\u003c\/strong\u003e The Bennett Marine BOLT actuators in this kit operate on 12 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be run with two actuators synchronized on one tab?\u003c\/strong\u003e No. This electric trim tab system is intended for single actuator use per tab, since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes and mounting plates included with this kit are stainless steel, while the actuator housing is water-tight black nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow difficult is installation for this trim tab kit?\u003c\/strong\u003e Installation is designed to be fast because the actuator arrives fully assembled and does not need to be disassembled before mounting to the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this Bennett Marine trim tab kit?\u003c\/strong\u003e The electric actuators in this kit carry a lifetime manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit run quieter than other trim tab systems?\u003c\/strong\u003e Yes. The BOLT actuator design is built to run quieter than older-technology electric trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the part number 6BT500133800 refer to?\u003c\/strong\u003e 6BT500133800 is the part number for this complete 12 inch by 12 inch Bennett Marine BOLT electric trim tab kit, sold without a control switch.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450503387,"sku":"BEN-BOLT1212","price":682.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT1212-12-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit__94533.1739460326.500.750.jpg?v=1785163393"},{"product_id":"bennett-marine-bolt1212ed-edge-mount-12-x-12-electric-trim-tab-kit-for-trailered-boats-17-28-ft","title":"Bennett Marine BOLT1212ED Edge Mount 12 x 12 Electric Trim Tab Kit for Trailered Boats 17-28 ft","description":"\u003cp\u003eThe Bennett Marine BOLT1212ED is a 12 inch by 12 inch electric trim tab kit built with an Edge Mount design for boats with limited vertical transom space. Trim tabs help balance boat loads, get the boat on plane faster, and improve fuel efficiency and ride quality by adjusting the running angle of the hull. This kit is designed for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts, and is recommended for trailered boats from 17 to 28 feet using a single actuator per tab.\u003c\/p\u003e\u003cp\u003eThe Edge Mount configuration uses an adjustable upper hinge specifically engineered for transoms with limited vertical clearance, requiring less than 6.5 inches of vertical transom space to install. The tabs turn up for added strength and use piano-hinged backing plates. Each kit includes two BEA2000 12-volt trim tab actuators built with a robust, water-tight black nylon housing that resists the water intrusion and marine growth failures common in older trim tab designs. The main seal is positioned high on the actuator to further protect against marine growth and water intrusion, and the wiring is routed through the upper hinge so no wires are exposed to the marine environment. Installation is fast because the actuator does not need to be disassembled during the process.\u003c\/p\u003e\u003cp\u003eTrim tab sizing on this kit follows the span by chord format: span is the side-to-side measurement and chord is the fore-to-aft measurement, giving this kit its 12 inch by 12 inch dimensions. The kit is backed by a 5 year manufacturer's warranty. A trim tab switch is required for operation but is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Known As:\u003c\/strong\u003e BOLT1212ED, 6BT-50013-41-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600283\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Span (Width):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Chord (Depth):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Transom Space Required:\u003c\/strong\u003e 6.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Stroke:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Length:\u003c\/strong\u003e 13.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Deutsch DT Series, 13A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Force (Actuation and Return):\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 10A at 250 pounds, 30A at 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Actuators Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Trim Planes Included:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Lengths:\u003c\/strong\u003e 20 feet (actuator to helm), 6 feet (actuator wire harness)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes, black nylon actuator housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for trailered boats 17 to 28 feet\u003c\/li\u003e\n\u003cli\u003eSuitable for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003cli\u003eDesigned for single actuator use per trim tab\u003c\/li\u003e\n\u003cli\u003eEdge Mount design suited to transoms with less than 6.5 inches of vertical space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Bennett Marine BOLT1212ED trim tab kit designed for?\u003c\/strong\u003e The BOLT1212ED (6BT500134100) is recommended for trailered boats from 17 to 28 feet, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the Edge Mount version different from a standard Bennett BOLT trim tab kit?\u003c\/strong\u003e The Edge Mount design on the BOLT1212ED uses an adjustable upper hinge built for transoms with limited vertical space, requiring less than 6.5 inches of vertical transom space to install, and the tabs turn up for added strength with piano-hinged backing plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in this kit?\u003c\/strong\u003e The BOLT1212ED trim tabs measure 12 inches by 12 inches, listed in span by chord format where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a trim tab switch included with the BOLT1212ED kit?\u003c\/strong\u003e No, the switch is sold separately from the BOLT1212ED (6BT500134100) trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical transom space does the BOLT1212ED require?\u003c\/strong\u003e The BOLT1212ED Edge Mount kit requires less than 6.5 inches of vertical transom space, specifically 6.39 inches, making it suitable for transoms with limited clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Bennett BOLT1212ED trim tab system use?\u003c\/strong\u003e This trim tab kit operates on 12 volts and uses Deutsch DT Series 13A waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT1212ED protect against water intrusion?\u003c\/strong\u003e Wiring on the BOLT1212ED (6BT500134100) is routed through the upper hinge so no wires are exposed to the marine environment, the actuator housing is water-tight black nylon, and the main seal sits high on the actuator to guard against marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this Bennett trim tab kit?\u003c\/strong\u003e The BOLT1212ED is backed by a 5 year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made from?\u003c\/strong\u003e The trim planes (tabs) in the BOLT1212ED kit are made of stainless steel, paired with a black nylon actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much working force do the BOLT1212ED actuators produce?\u003c\/strong\u003e The actuators used in this kit produce a working force of 750 pounds for both actuation and return, drawing 10A at 250 pounds and 30A at 750 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on the BOLT1212ED kit?\u003c\/strong\u003e Each BOLT1212ED actuator comes with a 6 foot wire harness plus a 20 foot harness with waterproof connectors, both included in the kit.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450470619,"sku":"BEN-BOLT1212ED","price":699.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT1212ED-12-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit-Edge-Mount__26700.1739477218.500.750.jpg?v=1785163393"},{"product_id":"bennett-bolt-electric-trim-tab-kit-6bt500134300-12-in-x-4-in-fits-trailered-boats-12-17-ft","title":"Bennett BOLT Electric Trim Tab Kit 6BT500134300 - 12 in x 4 in, Fits Trailered Boats 12-17 ft","description":"\u003cp\u003eThe Bennett 6BT500134300 BOLT Electric Trim Tab Kit is a 12 inch by 4 inch edge-style electric trim tab system built for trailered boats from 12 to 17 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. Bennett sizes trim tabs in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement, so this kit measures 12 inches wide by 4 inches deep. The BOLT system is intended for single actuator use, since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003eEach kit routes its wiring through the upper hinge, so no wiring is exposed to the marine environment, adding protection against corrosion and damage. The actuator housing is a water-tight black nylon design, and the main seal is positioned high on the actuator to guard against marine growth and water intrusion, two of the most common failure points on older trim tab systems. Bennett backs the electric actuators with a lifetime warranty. Installation is designed to be fast, since the actuator does not need to be disassembled during mounting.\u003c\/p\u003e\u003cp\u003eThe kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors. A trim tab control switch is not included and must be purchased separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Cross-Reference Part Number:\u003c\/strong\u003e 6BT-50013-43-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (Span):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth (Chord):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Water-tight black nylon actuator housing; stainless steel trim planes and mounting plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e 2 BEA2000 12-volt trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet, plus 6 feet wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 12 to 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Use:\u003c\/strong\u003e Single actuator use only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on electric actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailered boats 12 to 17 feet\u003c\/li\u003e\n\u003cli\u003eFlatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha Part Number 6BT-50013-43-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT124 trim tab kit designed for?\u003c\/strong\u003e This 12 inch by 4 inch BOLT kit (part 6BT500134300) is recommended for trailered boats from 12 to 17 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 12 x 4 trim tab size measured?\u003c\/strong\u003e Bennett lists trim tab sizes as span by chord, so 12 x 4 means a 12 inch side-to-side span and a 4 inch fore-to-aft chord for this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett 6BT500134300 kit include a control switch?\u003c\/strong\u003e No, the switch is sold separately from this trim tab kit; the kit itself includes only the actuators, trim planes, mounting plates, and wiring harnesses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit contains two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two of these actuators be run on the same trim tab?\u003c\/strong\u003e No, this BOLT electric trim tab system is intended for single actuator use per tab, since two electric actuators cannot be synchronized on one tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made from?\u003c\/strong\u003e The trim planes and mounting plates included with the 6BT500134300 kit are stainless steel, while the actuator housing is a water-tight black nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit protect against water intrusion?\u003c\/strong\u003e Wiring is routed through the upper hinge so it is never exposed to the marine environment, and the main seal on the actuator is positioned high to help guard against marine growth and water intrusion failures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a Yamaha equivalent part number for this Bennett trim tab kit?\u003c\/strong\u003e Yes, Bennett part 6BT500134300 (BOLT124) corresponds to Yamaha part number 6BT-50013-43-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this trim tab kit?\u003c\/strong\u003e The electric actuators in the Bennett 6BT500134300 kit carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on this kit?\u003c\/strong\u003e Each actuator comes with a 20 foot harness plus a 6 foot wire harness, both fitted with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult for this trim tab system?\u003c\/strong\u003e Installation is designed to be fast because the BOLT actuator does not need to be disassembled during mounting.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450601691,"sku":"BEN-BOLT124","price":577.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT124-12-inch-by-4-inch-BOLT-Electric-Trim-Tab-Kit__63161.1739477218.500.750.jpg?v=1785163393"},{"product_id":"bennett-bolt129-12-in-x-9-in-electric-trim-tab-kit-p-n-6bt500134400-for-14-18-ft-boats","title":"Bennett BOLT129 12 in x 9 in Electric Trim Tab Kit (P\/N 6BT500134400) for 14-18 ft Boats","description":"\u003cp\u003eThe Bennett BOLT129 is a 12 in x 9 in electric trim tab kit built to improve ride quality, handling, and performance on trailered boats from 14 to 18 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. The kit is more suitable for single actuator use.\u003c\/p\u003e\u003cp\u003eBennett trim tab sizing is expressed as span by chord: span is the side-to-side measurement and chord is the fore-to-aft measurement. This kit measures 12 inches wide by 9 inches deep. Each trim plane is stainless steel and mounts to a water-tight black nylon actuator that is designed for trouble-free operation. Wiring is threaded through the upper hinge so no wires are exposed to the marine environment, and the main seal is placed high on the actuator to help protect against marine growth and water intrusion failures, common causes of trim tab malfunction in older designs. The system is designed to run quieter than competing trim tab products, and installation is fast because the actuator does not require disassembly. The electric actuators carry a lifetime warranty and the kit is solidly constructed for a long service lifespan.\u003c\/p\u003e\u003cp\u003eThe kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes with mounting plates, two 20 ft harnesses with waterproof connectors, and 6 ft wire harnesses with waterproof connectors. A trim tab control switch is not included and must be purchased separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285600016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 14 to 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator:\u003c\/strong\u003e BEA2000 12-volt water-tight black nylon actuator (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Plane Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e Two 20 ft harnesses with waterproof connectors, plus 6 ft wire harnesses with waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Warranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 25 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for trailered boats from 14 to 18 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. More suitable for single actuator use.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT129 trim tab kit designed for?\u003c\/strong\u003e This kit is designed for trailered boats from 14 to 18 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the 12 in x 9 in dimensions on this trim tab kit mean?\u003c\/strong\u003e Bennett trim tab sizing is listed as span by chord: span is the side-to-side measurement and chord is the fore-to-aft measurement. The BOLT129 (P\/N 6BT500134400) measures 12 inches wide by 9 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes with mounting plates, two 20 ft harnesses with waterproof connectors, and 6 ft wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit come with a trim tab switch?\u003c\/strong\u003e No, the switch is sold separately and is not included with the Bennett BOLT129 12 in x 9 in trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this trim tab kit protect against water intrusion?\u003c\/strong\u003e Wiring is threaded through the upper hinge so no wires are exposed to the marine environment, the actuator is water-tight black nylon, and the main seal is placed high on the actuator to guard against marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT129 actuators?\u003c\/strong\u003e The electric actuators in this kit carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit difficult to install?\u003c\/strong\u003e Installation is fast because the actuator does not require disassembly, a feature built into the Bennett BOLT129 12 in x 9 in trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes are stainless steel and come with mounting plates as part of the BOLT129 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on this kit?\u003c\/strong\u003e The kit includes two 20 ft harnesses with waterproof connectors, plus 6 ft wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e The Bennett 12 in x 9 in BOLT Electric Trim Tab Kit (P\/N 6BT500134400) weighs 20 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit meant for single or dual actuator setups?\u003c\/strong\u003e The Bennett BOLT129 system is more suitable for single actuator use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the manufacturer part number for this trim tab kit?\u003c\/strong\u003e The manufacturer part number is 6BT500134400, corresponding to the Bennett BOLT129 12 in x 9 in Electric Trim Tab Kit.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450667227,"sku":"BEN-BOLT129","price":624.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT129-12-inch-by-9-inch-BOLT-Electric-Trim-Tab-Kit__41510.1739477218.500.750.jpg?v=1785163394"},{"product_id":"bennett-marine-bolt1812-18-x-12-inch-electric-trim-tab-kit-for-boats-26-to-36-feet","title":"Bennett Marine BOLT1812 18 x 12 Inch Electric Trim Tab Kit for Boats 26 to 36 Feet","description":"\u003cp\u003eThe Bennett Marine BOLT1812 is an 18 inch by 12 inch electric trim tab kit built for boats in the 26 to 36 foot range, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts. Trim tabs mount at the transom and allow the operator to adjust running trim, correcting bow rise, list, and porpoising to improve ride quality, handling, and fuel efficiency at speed. Bennett has manufactured electric trim tab systems since 1960 and the BOLT series was engineered to outperform and outlast older trim tab designs by addressing the water intrusion and part failures common in outdated technology.\u003c\/p\u003e\u003cp\u003eThe BOLT1812 kit routes its wiring through the upper hinge of each trim plane so no wiring is exposed to the marine environment, adding protection against corrosion and damage. Each kit uses a water-tight black nylon actuator for trouble-free operation and places the main seal high on the actuator body to guard against marine growth and water intrusion failures, and the design runs quieter than competing systems. Installation is fast because the actuator does not require disassembly during mounting. The stainless steel trim planes and mounting plates are solidly constructed for a long service life, and the electric actuators carry a lifetime warranty. A trim tab control switch is required to operate the system and is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e BOLT1812\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50013-47-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Plane Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness Length:\u003c\/strong\u003e 20 feet, plus 6 feet wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 26 to 36 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 25 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600054\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on electric actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Bennett BOLT1812 kit is designed for flatboats, center console boats, dual console boats, deck boats, bowriders, bass boats, and runabouts, and is recommended for trailered boats from 26 to 36 feet. It corresponds to Yamaha part number 6BT-50013-47-00.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bennett BOLT1812 trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the BOLT1812 kit?\u003c\/strong\u003e The BOLT1812 trim planes measure 18 inches wide by 12 inches deep, listed in Bennett's span by chord format where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BOLT1812 kit come with a control switch?\u003c\/strong\u003e No, the Bennett BOLT1812 electric trim tab kit does not include a control switch. The switch is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT1812 trim tab kit designed for?\u003c\/strong\u003e Bennett recommends the BOLT1812 18 x 12 inch kit for trailered boats from 26 to 36 feet, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT1812 trim tab kit weigh?\u003c\/strong\u003e The Bennett BOLT1812 electric trim tab kit weighs 25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions for the BOLT1812 kit?\u003c\/strong\u003e The Bennett BOLT1812 trim tab kit ships in a package measuring 25 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT1812 protect its wiring in a marine environment?\u003c\/strong\u003e Wires on the BOLT1812 are threaded through the upper hinge of the trim plane so they are never exposed to the marine environment, and the actuator is water-tight black nylon with a high-mounted main seal to resist marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the BOLT1812 and the smaller Bennett BOLT kits?\u003c\/strong\u003e The BOLT1812 measures 18 x 12 inches and is recommended for boats 26 to 36 feet, compared to the smaller BOLT129 (12 x 9 inches, 14 to 18 foot boats) and BOLT189 (18 x 9 inches, 20 to 23 foot boats). Choosing the correct size depends on matching the trim tab span and chord to the boat length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett BOLT1812 kit compatible with Yamaha applications?\u003c\/strong\u003e The Bennett BOLT1812 corresponds to Yamaha part number 6BT-50013-47-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of in the BOLT1812 kit?\u003c\/strong\u003e The BOLT1812 kit uses stainless steel trim planes and mounting plates for a solidly constructed, long service lifespan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett BOLT1812 installation difficult?\u003c\/strong\u003e Installation of the BOLT1812 is designed to be fast because the actuator does not require disassembly during mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT1812 trim tab kit?\u003c\/strong\u003e The BEA2000 electric actuators included in the Bennett BOLT1812 kit carry a lifetime warranty.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450732763,"sku":"BEN-BOLT1812","price":730.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT1812-18-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit__24058.1739477218.500.750.jpg?v=1785163394"},{"product_id":"bennett-bolt2412-electric-trim-tab-kit-24-x-12-inch-part-6bt500135100-for-trailered-boats-25-to-31-feet","title":"Bennett BOLT2412 Electric Trim Tab Kit, 24 x 12 Inch, Part 6BT500135100, for Trailered Boats 25 to 31 Feet","description":"\u003cp\u003eThe Bennett BOLT2412 Electric Trim Tab Kit is a 24 inch by 12 inch trim tab system built to improve boat ride quality, handling, and performance. It is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is more suitable for single actuator use on trailered boats from 25 to 31 feet. Bennett trim tab sizes are listed in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement -- this kit measures 24 inches wide (span) by 12 inches deep (chord).\u003c\/p\u003e\u003cp\u003eThe kit uses Bennett's BOLT technology, which routes wires through the upper hinge so none are exposed to the marine environment, adding protection and safety. A water-tight black nylon actuator provides trouble-free operation, and the main seal is placed high on the actuator to guard against marine growth and water intrusion failures common in older designs. The system also runs quieter than competing trim tab systems. Installation is fast because the actuator does not require disassembly, and the electric actuators carry a lifetime warranty. The kit includes two BEA2000 12-volt trim tab actuators and two stainless steel trim planes and mounting plates, along with 20 foot harnesses with waterproof connectors and 6 foot wire harnesses with waterproof connectors. A trim tab switch is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBennett Model Number:\u003c\/strong\u003e BOLT2412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50013-51-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600061\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 25 to 31 feet, trailered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet, plus 6 feet wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes and mounting plates, black nylon actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty for electric actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003cli\u003eTrailered boats 25 to 31 feet\u003c\/li\u003e\n\u003cli\u003eSingle actuator use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett BOLT2412 trim tab kit designed for?\u003c\/strong\u003e The Bennett BOLT2412 Electric Trim Tab Kit is designed to improve boat ride quality, handling, and performance, and is well suited for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts, recommended for trailered boats from 25 to 31 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the BOLT2412 kit?\u003c\/strong\u003e This kit measures 24 inches wide (span) by 12 inches deep (chord). Bennett sizes its trim tabs in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bennett BOLT2412 trim tab kit, part 6BT500135100?\u003c\/strong\u003e This kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a trim tab switch included with this kit?\u003c\/strong\u003e No. The Bennett BOLT2412 trim tab kit is sold without a switch, and the switch must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actuators power the BOLT2412 system?\u003c\/strong\u003e Two BEA2000 12-volt trim tab actuators drive the trim planes in this Bennett BOLT2412 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on the BOLT2412 kit?\u003c\/strong\u003e Each actuator comes with a 20 foot harness with waterproof connectors, plus a 6 foot wire harness with a waterproof connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the trim planes made of on this Bennett kit?\u003c\/strong\u003e Stainless steel trim planes and mounting plates are used on the Bennett BOLT2412, part 6BT500135100.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT2412 protect against water intrusion?\u003c\/strong\u003e Wires are threaded through the upper hinge so none are exposed to the marine environment, the actuator itself is a water-tight black nylon design, and the main seal is placed high on the unit to guard against marine growth and water intrusion failures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two actuators on the same tab be synchronized?\u003c\/strong\u003e No. The Bennett BOLT2412 system is more suitable for single actuator use, since two electric actuators on the same tab cannot be synchronized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT2412 kit?\u003c\/strong\u003e The electric actuators in the Bennett BOLT2412 kit, part 6BT500135100, carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT2412 trim tab kit weigh?\u003c\/strong\u003e The Bennett BOLT2412 Electric Trim Tab Kit weighs 31 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is the BOLT2412 recommended for?\u003c\/strong\u003e Bennett recommends the BOLT2412 for trailered boats between 25 and 31 feet, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450765531,"sku":"BEN-BOLT2412","price":774.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT2412-24-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit__84374.1739477219.500.750.jpg?v=1785163394"},{"product_id":"bennett-marine-bolt189-18-x-9-electric-trim-tab-kit-part-6bt500134900","title":"Bennett Marine BOLT189 18 x 9 Electric Trim Tab Kit - Part 6BT500134900","description":"\u003cp\u003eThe Bennett Marine BOLT189 is an 18 inch by 9 inch electric trim tab kit built to improve ride quality, handling, and performance on trailered boats in the 20 to 23 foot range. It is well suited to flatboats, center console boats, dual console boats, deck boats, bowriders, bass boats, and runabouts. The BOLT system routes wiring through the upper hinge so no wires are exposed to the marine environment, and it uses a water-tight black nylon actuator for trouble-free operation. The main seal is positioned high on the actuator to guard against marine growth and water intrusion failures, two of the most common causes of trim tab breakdowns in older designs. Installation is fast because the actuator does not require disassembly during mounting.\u003c\/p\u003e\u003cp\u003eEach BOLT189 kit includes two BEA2000 12-volt trim tab actuators and two stainless steel trim planes with mounting plates, giving the tabs solid, corrosion-resistant construction for a long service lifespan. The kit also comes with two 20 foot harnesses with waterproof connectors plus 6 foot wire harnesses with waterproof connectors. A control switch is not included and must be purchased separately. Bennett backs the electric actuators in this system with a lifetime warranty. Sizing on Bennett electric trim tabs is expressed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement; on the BOLT189, that is an 18 inch span and a 9 inch chord.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e BOLT189\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Size (Span x Chord):\u003c\/strong\u003e 18 inches x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (Span):\u003c\/strong\u003e 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth (Chord):\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 25 x 15 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator:\u003c\/strong\u003e (2) BEA2000 12-volt trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e (2) 20 foot harnesses with waterproof connectors, plus 6 foot wire harnesses with waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 to 23 feet (trailered boats)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on electric actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel and nylon\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailered boats 20 to 23 feet\u003c\/li\u003e\n\u003cli\u003eFlatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003cli\u003eRecommended for single actuator use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6BT-50013-49-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT189 trim tab kit designed for?\u003c\/strong\u003e The Bennett BOLT189 electric trim tab kit is recommended for trailered boats from 20 to 23 feet, including flatboats, center console boats, dual console boats, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the BOLT189 kit?\u003c\/strong\u003e The trim tabs measure 18 inches wide (span) by 9 inches deep (chord). Bennett lists trim tab sizing as span by chord, with span being the side-to-side measurement and chord being the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett BOLT189 kit include a control switch?\u003c\/strong\u003e No, the switch is sold separately and is not included with the Bennett BOLT189 electric trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with the BOLT189 trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes with mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT189 trim tab kit weigh?\u003c\/strong\u003e The Bennett BOLT189 kit weighs 24 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the shipping dimensions of the BOLT189 kit?\u003c\/strong\u003e The BOLT189 kit ships in a box measuring 25 x 15 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT system protect against water intrusion?\u003c\/strong\u003e Wires are threaded through the upper hinge so none are exposed to the marine environment, the actuator is a water-tight black nylon design, and the main seal is placed high on the actuator to help prevent marine growth and water intrusion failures, common causes of trim tab breakdowns in older systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett BOLT189 kit suitable for dual actuator synchronization?\u003c\/strong\u003e The BOLT189 electric trim tab system is more suitable for single actuator use per side rather than synchronized dual-actuator operation on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT189 electric actuators?\u003c\/strong\u003e Bennett provides a lifetime warranty on the electric actuators included in the BOLT189 trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett BOLT189 have a cross-reference part number?\u003c\/strong\u003e Yes, the Bennett BOLT189 (Bennett part number 6BT500134900) corresponds to Yamaha part number 6BT-50013-49-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult with the BOLT189 actuators?\u003c\/strong\u003e Installation is designed to be fast because the actuator does not require disassembly during mounting on the BOLT189 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are the BOLT189 trim planes made from?\u003c\/strong\u003e The BOLT189 kit uses stainless steel trim planes and mounting plates paired with a black nylon actuator housing.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450831067,"sku":"BEN-BOLT189","price":691.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT189-18-inch-by-9-inch-BOLT-Electric-Trim-Tab-Kit__27580.1739477218.500.750.jpg?v=1785163393"},{"product_id":"bennett-marine-bolt-24-x-9-electric-trim-tab-kit-mpn-6bt500135200-trailered-boats-22-27-ft","title":"Bennett Marine BOLT 24 x 9 Electric Trim Tab Kit, MPN 6BT500135200 - Trailered Boats 22-27 ft","description":"\u003cp\u003eThis Bennett Marine BOLT electric trim tab kit (MPN 6BT500135200) is a 24 inch by 9 inch trim tab set built for trailered boats from 22 to 27 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. The system is designed for single actuator use per side. Trim tab sizing follows the span x chord convention, where span is the side-to-side measurement (24 inches) and chord is the fore-to-aft measurement (9 inches).\u003c\/p\u003e\u003cp\u003eThe BOLT system routes wiring through the upper hinge so no wires are exposed to the marine environment, and uses a water-tight black nylon actuator for trouble-free operation. The main seal is positioned high on the actuator to protect against marine growth and water intrusion failures, addressing the common failure points of older electric trim tab designs. Installation is fast because the actuator does not need to be disassembled during the process.\u003c\/p\u003e\u003cp\u003eIncluded in the kit are two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors. A control switch is not included and must be purchased separately. The electric actuators carry a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BOLT Electric Trim Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes and mounting plates; nylon actuator housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 22 to 27 feet (trailered)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Types:\u003c\/strong\u003e Flatboats, center console, dual console, deck boats, bowriders, bass boats, runabouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet and 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Reference (Yamaha Part Number):\u003c\/strong\u003e 6BT-50013-52-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty (electric actuators)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuitable for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. Best suited for single actuator use and for trailered boats 22 to 27 feet.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6BT-50013-52-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett BOLT kit with MPN 6BT500135200?\u003c\/strong\u003e The trim tabs measure 24 inches wide by 9 inches deep. Bennett sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this Bennett trim tab kit designed for?\u003c\/strong\u003e This 24 x 9 BOLT electric trim tab kit is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is best suited for trailered boats 22 to 27 feet using a single actuator per side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this kit?\u003c\/strong\u003e No. The Bennett BOLT 24 x 9 trim tab kit (MPN 6BT500135200) is sold without a switch, which must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this Bennett trim tab kit cross-reference to a Yamaha part number?\u003c\/strong\u003e Yes, this kit corresponds to Yamaha part number 6BT-50013-52-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT system compare to older electric trim tab designs?\u003c\/strong\u003e Compared to older electric trim tab technology, the Bennett BOLT system reduces water intrusion and the part malfunctions common to outdated designs, while running quieter than competing systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to the actuators in this kit?\u003c\/strong\u003e The BEA2000 electric actuators included with this Bennett BOLT 24 x 9 kit carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes and mounting plates in this kit are stainless steel, paired with a water-tight black nylon actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT 24 x 9 trim tab kit weigh?\u003c\/strong\u003e This trim tab kit (MPN 6BT500135200) weighs 27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit difficult to install?\u003c\/strong\u003e Installation is fast because the actuator does not need to be disassembled during the process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two actuators be synced together with this kit?\u003c\/strong\u003e No. The Bennett BOLT 24 x 9 kit is best suited for single actuator use per side rather than synchronized dual-actuator setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat protects this trim tab actuator from water intrusion?\u003c\/strong\u003e The actuator is water-tight black nylon with a high-mounted main seal, and its wiring is routed through the upper hinge so no wires are exposed to the marine environment.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450863835,"sku":"BEN-BOLT249","price":730.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT249-24-inch-by-9-inch-BOLT-Electric-Trim-Tab-Kit__83682.1739477218.500.750.jpg?v=1785163394"},{"product_id":"bennett-6-x-12-bolt-electric-trim-tab-kit-edge-mount-yamaha-6bt-50013-53-00-equivalent","title":"Bennett 6\" x 12\" BOLT Electric Trim Tab Kit - Edge Mount (Yamaha 6BT-50013-53-00 Equivalent)","description":"\u003cp\u003eThe Bennett BOLT612ED is a 6 inch by 12 inch electric trim tab kit built with an Edge Mount design for boats with limited vertical transom space. Trim tab sizing is expressed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement, so this kit's 6 inch span and 12 inch chord tabs are sized for smaller transoms and trailered boats. Trim tabs mount at the stern and adjust boat trim in the water to help balance loads, get the boat on plane faster, and improve efficiency and ride quality.\u003c\/p\u003e\u003cp\u003eThis kit's Edge Mount hinge is adjustable and requires less than 6.5 inches of vertical transom space to install, making it a fit for transoms where a standard mount trim tab actuator will not clear. The tabs turn up for added strength and use piano-hinged backing plates. Two BEA2000 12-volt trim tab actuators drive the stainless steel trim planes, and the actuator housing is a water-tight black nylon design with wiring routed through the upper hinge so no wires are exposed to the marine environment. The main seal is placed high on the actuator to resist marine growth and water intrusion failures.\u003c\/p\u003e\u003cp\u003eThe Bennett BOLT612ED is intended for single actuator use, since two electric actuators cannot be synchronized on the same tab, and is suited to trailered boats from 17 to 28 feet. It corresponds to Yamaha part number 6BT-50013-53-00. The kit includes two 20 foot wiring harnesses and 6 foot actuator harnesses with waterproof connectors; a control switch is sold separately. The kit is backed by a 5 year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBennett Model:\u003c\/strong\u003e BOLT612ED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Edge Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Vertical Transom Space Required:\u003c\/strong\u003e less than 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator:\u003c\/strong\u003e BEA2000 12-volt trim tab actuator (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Plane Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 17 to 28 feet (trailered boats)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Use:\u003c\/strong\u003e Single actuator use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet with waterproof connectors, plus 6 feet actuator wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 year manufacturer's warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Included:\u003c\/strong\u003e No, sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600290\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for trailered boats 17 to 28 feet, for single actuator use per tab. Corresponds to Yamaha part number 6BT-50013-53-00.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha 6BT-50013-53-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett BOLT612ED kit?\u003c\/strong\u003e The Bennett BOLT612ED Edge Mount kit ships with trim tabs measuring 6 inches wide by 12 inches deep, listed in span by chord format where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit designed for?\u003c\/strong\u003e This Bennett edge mount kit is designed for trailered boats from 17 to 28 feet and is intended for single actuator use, since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical transom space does the BOLT612ED kit need?\u003c\/strong\u003e Less than 6.5 inches of vertical transom space is required to install the Bennett BOLT612ED trim tab kit, making it suited to transoms with limited vertical clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this kit?\u003c\/strong\u003e No switch is included with the Bennett BOLT612ED trim tab kit; the rocker switch is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The Bennett BOLT612ED kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this trim tab kit have a Yamaha equivalent part number?\u003c\/strong\u003e Yes, this Bennett edge mount trim tab kit corresponds to Yamaha part number 6BT-50013-53-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT612ED kit?\u003c\/strong\u003e A 5 year manufacturer's warranty covers the Bennett BOLT612ED electric trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Edge Mount design differ from a standard mount trim tab?\u003c\/strong\u003e The Edge Mount design uses an adjustable upper hinge built for transoms with limited vertical space, and the tabs turn up for added strength with piano-hinged backing plates, unlike a standard mount hinge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes on the Bennett BOLT612ED kit are stainless steel, paired with a water-tight black nylon actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the actuator wires exposed to water on this kit?\u003c\/strong\u003e No, the wires on the Bennett BOLT612ED kit are threaded through the upper hinge so none are exposed to the marine environment, which helps prevent water intrusion failures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two of these trim tabs share one actuator setup?\u003c\/strong\u003e Each Bennett BOLT612ED tab runs on its own single electric actuator, since the system is built for single actuator use per tab and two electric actuators cannot be synchronized on one tab.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450896603,"sku":"BEN-BOLT612ED","price":640.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT612ED-6-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit-Edge-Mount__53036.1739462535.500.750.jpg?v=1785163395"},{"product_id":"bennett-bolt912ed-electric-trim-tab-kit-9-x-12-edge-mount-part-6bt500135400","title":"Bennett BOLT912ED Electric Trim Tab Kit, 9 x 12 Edge Mount, Part 6BT500135400","description":"\u003cp\u003eThe Bennett BOLT912ED is a 9 inch by 12 inch electric trim tab kit built around an edge mount design for boats with limited vertical transom space. Trim tab sizing follows Bennett's span by chord format, meaning the tabs measure 9 inches side to side (span) and 12 inches fore to aft (chord). The edge mount configuration uses an adjustable upper hinge that requires only 6.39 inches of vertical transom clearance to install, and the tabs themselves turn up for added strength with piano-hinged backing plates. This kit is intended for trailered boats between 17 and 28 feet, and it is designed for single-actuator use per tab since two electric actuators cannot be synchronized on the same trim tab.\u003c\/p\u003e\u003cp\u003eEach kit includes two BEA2000 12-volt actuators housed in a water-tight black nylon casing. Wiring is concealed and protected as it runs through the upper hinge, leaving no exposed wires in the marine environment, and the main seal is mounted high on the actuator to guard against marine growth and water intrusion. The actuators produce up to 750 pounds of actuation and return force, drawing 10 amps at 250 pounds of load and up to 30 amps at full rated force, and connect through Deutsch DT Series 13 amp waterproof connectors. The kit ships with stainless steel trim planes and mounting plates, two 20 foot main harnesses, and 6 foot actuator harnesses, all with waterproof connectors. A control switch is not included and must be purchased separately. The kit is backed by a 5 year manufacturer's warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Size (Span x Chord):\u003c\/strong\u003e 9 inches x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Edge Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Transom Space Required:\u003c\/strong\u003e 6.39 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Length:\u003c\/strong\u003e 13.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Stroke:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Force (Actuation and Return):\u003c\/strong\u003e 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 10 amps at 250 pounds, 30 amps at 750 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Connector:\u003c\/strong\u003e Deutsch DT Series, 13 amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness Length:\u003c\/strong\u003e 20 feet main harness with 6 foot actuator harness, waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Plane Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Housing Material:\u003c\/strong\u003e Black nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Water resistant, water-tight actuator seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 year manufacturer's warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50013-54-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailered boats 17 to 28 feet in length\u003c\/li\u003e\n\u003cli\u003eSingle-actuator installations (two electric actuators cannot be synchronized on one tab)\u003c\/li\u003e\n\u003cli\u003eTransoms with limited vertical space (requires 6.39 inches of vertical clearance)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett BOLT912ED kit, part number 6BT500135400?\u003c\/strong\u003e The trim tabs measure 9 inches by 12 inches, sized as span (side to side) by chord (fore to aft). This edge mount kit, Bennett part 6BT500135400, uses the BOLT912ED design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is the Bennett BOLT912ED 9 x 12 trim tab kit designed for?\u003c\/strong\u003e This kit is designed for trailered boats between 17 and 28 feet in length, and it is intended for single-actuator installations since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical transom space does this trim tab kit need?\u003c\/strong\u003e The Bennett BOLT912ED edge mount kit requires 6.39 inches of vertical transom space, under the 6.5 inch clearance needed for standard installations, making it suited to transoms with limited vertical room.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part number 6BT500135400?\u003c\/strong\u003e The kit ships with two BEA2000 12-volt trim tab actuators, two stainless steel trim planes with mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot actuator wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett BOLT912ED kit include a control switch?\u003c\/strong\u003e No, a control switch is sold separately from the Bennett BOLT912ED trim tab kit; only the actuators, trim planes, and harnesses are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes (tabs) in the Bennett BOLT912ED kit are stainless steel, paired with mounting plates and piano-hinged backing plates on the tab itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage and electrical connectors does the BOLT912ED actuator use?\u003c\/strong\u003e Each BEA2000 actuator in this kit runs on 12 volts and terminates in a Deutsch DT Series 13 amp waterproof connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Edge Mount design different from a standard mount trim tab kit?\u003c\/strong\u003e The Edge Mount design used on part 6BT500135400 has an adjustable upper hinge built for transoms with limited vertical space, and the tabs turn up for added strength with piano-hinged backing plates, features not found on a standard mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much force do the BOLT912ED actuators produce?\u003c\/strong\u003e The actuators are rated for 750 pounds of actuation and return force, drawing 10 amps at 250 pounds of load and up to 30 amps at the full 750 pound rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit waterproof?\u003c\/strong\u003e Yes, the Bennett BOLT912ED actuator uses a water-tight black nylon housing with the main seal positioned high on the unit to resist marine growth and water intrusion, and all harness connectors are waterproof.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT912ED trim tab kit?\u003c\/strong\u003e Bennett covers this kit, part 6BT500135400, with a 5 year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I upgrade from a Lenco trim tab system to this Bennett kit?\u003c\/strong\u003e Bennett offers a separate Lenco-to-BOLT conversion kit that lets boaters replace Lenco actuators with Bennett BOLT actuators using existing mounting holes, though that conversion kit is a different product from the BOLT912ED 9 x 12 edge mount kit itself.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450929371,"sku":"BEN-BOLT912ED","price":643.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT912ED-9-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit-Edge-Mount__76780.1739477219.500.750.jpg?v=1785163395"},{"product_id":"bennett-6bt500136000-lenco-to-bolt-trim-tab-actuator-conversion-kit","title":"Bennett 6BT500136000 Lenco to BOLT Trim Tab Actuator Conversion Kit","description":"\u003cp\u003eThe Bennett 6BT500136000 Lenco to BOLT Trim Tab Actuator Conversion Kit gives boat owners a cost effective, quick, and easy way to convert an existing Lenco trim tab system over to Bennett's electric BOLT actuators. Instead of replacing the entire trim tab system, this kit lets you keep your existing trim tab blades and simply swap out the Lenco actuators for Bennett BOLT actuators using the same mounting holes already in the transom, with no new holes to drill.\u003c\/p\u003e\u003cp\u003eThe kit is designed for plug-n-play connection to your existing standard Lenco controls, so the switch to Bennett actuators does not require rewiring your control panel or switches. It is compatible with Lenco Standard Mount, Standard Performance, and Edge Mount trim tab systems, covering the most common Lenco actuator configurations found on trailered and small to mid-size boats.\u003c\/p\u003e\u003cp\u003eBennett positions this conversion around the long-term reliability of its electric actuators compared to older Lenco units, backing the BOLT actuators in this kit with a lifetime limited warranty. Installation is straightforward for anyone comfortable with basic hand tools, since the actuators bolt directly into the existing hardware locations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500136000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator Conversion Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Lenco Standard Mount, Standard Performance, and Edge Mount trim tab systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Plug-n-play with existing standard Lenco controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Uses existing mounting holes, no new holes to drill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime limited warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600085\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLenco Standard Mount trim tab systems\u003c\/li\u003e\n\u003cli\u003eLenco Standard Performance trim tab systems\u003c\/li\u003e\n\u003cli\u003eLenco Edge Mount trim tab systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett 6BT500136000 Lenco to BOLT Conversion Kit actually convert?\u003c\/strong\u003e It converts an existing Lenco trim tab system over to Bennett BOLT electric actuators, replacing only the Lenco actuators while the existing trim tab blades stay in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need to drill new holes to install this conversion kit?\u003c\/strong\u003e No new holes are needed. The Bennett 6BT500136000 kit is designed to use the existing mounting holes from the Lenco actuators, so the Bennett BOLT actuators bolt directly into place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Lenco trim tab systems is this kit compatible with?\u003c\/strong\u003e This kit works with Lenco Standard Mount, Standard Performance, and Edge Mount trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to rewire my existing trim tab controls after installing this kit?\u003c\/strong\u003e No rewiring is required. The Bennett 6BT500136000 kit connects plug-n-play to your existing standard Lenco controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace my trim tab blades along with the actuators?\u003c\/strong\u003e No, the existing trim tab blades are kept in place with this conversion kit; only the Lenco actuators are replaced with Bennett BOLT actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett 6BT500136000 conversion kit weigh?\u003c\/strong\u003e The kit weighs 8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT actuators in this conversion kit?\u003c\/strong\u003e The Bennett BOLT actuators included in the 6BT500136000 conversion kit are backed by a lifetime limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy switch from Lenco actuators to Bennett BOLT actuators?\u003c\/strong\u003e Bennett markets its BOLT electric actuators as exceptionally durable and dependable, and unlike the original Lenco actuators, they are backed by a lifetime limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit a full trim tab replacement or just the actuators?\u003c\/strong\u003e The 6BT500136000 kit replaces only the actuators; it is not a full trim tab blade replacement, since the existing tabs are retained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be installed without professional help?\u003c\/strong\u003e The plug-n-play connection to existing Lenco controls and the use of existing mounting holes make the Bennett 6BT500136000 kit straightforward to install for owners comfortable with basic hand tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Bennett Lenco to BOLT Conversion Kit?\u003c\/strong\u003e The UPC for the Bennett 6BT500136000 Lenco to BOLT Conversion Kit is 666285600085.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450962139,"sku":"BEN-BOLTLKCON","price":384.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-BOLTLKCON__56263.1739460337.500.750.jpg?v=1785163395"},{"product_id":"bennett-bolt-trim-tab-rocker-switch-black-control-part-6bt500174000","title":"Bennett BOLT Trim Tab Rocker Switch, Black Control, Part 6BT500174000","description":"\u003cp\u003eThe Bennett BOLT Trim Tab Rocker Switch (6BT500174000) is the control panel switch used to operate Bennett BOLT Electric Trim Tab actuators from the helm. It is ergonomically designed and water resistant, delivering a positive audible click each time the trim tabs are engaged so the operator gets clear tactile feedback without needing to glance down at the panel. A built-in lock-out feature prevents the operator from pressing both directions at the same time, protecting the actuator motors from conflicting commands.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the switch fits into any existing Bennett 2 1\/2 inch rocker switch hole, so it drops into a standard cutout without additional fabrication. As a bridge control, it comes wired with a 20 foot harness, making it a practical choice for boats that need a second helm station or a longer run to the panel. The housing is plastic and the switch face is finished in black for a clean instrument panel look.\u003c\/p\u003e\u003cp\u003eThis rocker switch is built to work with Bennett BOLT Electric Trim Tab controls, giving boat owners a durable, dependable way to trim their boat for the best ride, fuel efficiency, and visibility at speed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500174000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Rocker Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount, fits standard Bennett 2 1\/2 inch rocker switch hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 5 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600238\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Bennett BOLT Electric Trim Tab controls\u003c\/li\u003e\n\u003cli\u003eFits any existing Bennett 2 1\/2 inch rocker switch cutout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett 6BT500174000 rocker switch used for?\u003c\/strong\u003e It is the control switch used to operate Bennett BOLT Electric Trim Tab actuators from the helm, letting the operator raise or lower each trim tab with a rocker action.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch work with any trim tab brand?\u003c\/strong\u003e The 6BT500174000 rocker switch is built for Bennett BOLT Electric Trim Tab controls, not for other trim tab brands or systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire harness on this switch?\u003c\/strong\u003e Bennett includes a 20 foot wire harness with this bridge control, which is long enough to reach a second helm station or a longer run from the main panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cutout does the Bennett BOLT rocker switch need?\u003c\/strong\u003e The 6BT500174000 switch is designed to fit into any existing Bennett 2 1\/2 inch rocker switch hole, so no new cutout is needed if you already have a Bennett panel opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this rocker switch water resistant?\u003c\/strong\u003e Yes, the Bennett BOLT rocker switch is water resistant and built to hold up in a marine helm environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Bennett BOLT rocker switch?\u003c\/strong\u003e Part number 6BT500174000 is finished in black to match a standard dark helm panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the switch housing made from?\u003c\/strong\u003e The housing and rocker face of the 6BT500174000 switch are made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch have a lock-out feature?\u003c\/strong\u003e Yes, a lock-out feature on this Bennett switch prevents the operator from pressing both trim directions at the same time, which protects the actuators from conflicting signals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the trim tabs are actually engaging when I press the switch?\u003c\/strong\u003e The Bennett BOLT rocker switch gives a positive audible click each time it is pressed, confirming the trim tab command has been engaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this rocker switch control?\u003c\/strong\u003e The Bennett 6BT500174000 rocker switch measures 6 x 5 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT rocker switch weigh?\u003c\/strong\u003e This switch weighs 1.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be used for a second helm station?\u003c\/strong\u003e Yes, the 6BT500174000 is a bridge control switch that ships with a 20 foot wire harness, making it suitable for a second station installation.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450994907,"sku":"BEN-BRC4000","price":104.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BRC4000-BOLT-Trim-Tab-Rocker-Switch-wiring-harness-and-packaging__64623.1739460340.500.750.jpg?v=1785163395"},{"product_id":"bennett-marine-trim-tab-actuator-upper-hinge-with-coil-port-side-red-6bt500866800","title":"Bennett Marine Trim Tab Actuator Upper Hinge with Coil, Port Side, Red - 6BT500866800","description":"\u003cp\u003eThis is the Bennett Marine upper actuator hinge with integrated coil, built for use with Bennett trim tab systems. The hinge mounts at the top of the trim tab actuator and includes a coil as part of the assembly, giving installers a direct, ready-to-fit replacement point for the upper actuator connection. It is finished in red and designated specifically for the port side of the boat.\u003c\/p\u003e\u003cp\u003eBecause trim tab actuators are side-specific, this hinge is not interchangeable with a starboard unit -- the starboard version is a separate part with its own part number, so boat owners replacing hardware on both sides should confirm they are ordering one hinge for each side. The part measures 11 inches long by 5 inches wide and weighs 1 pound, making it a straightforward drop-in component for maintenance or repair of an existing Bennett trim tab actuator.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500866800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator Hinge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11 inches L x 5 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285333006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use with Bennett trim tab actuators.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett 6BT500866800 hinge used for?\u003c\/strong\u003e It is the upper actuator hinge with an integrated coil used on Bennett trim tab actuators, providing the pivot point and coil connection at the top of the actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hinge for the port or starboard side?\u003c\/strong\u003e This hinge, part number 6BT500866800, is designated for the port side only. The starboard side uses a separate part with a different part number, so make sure you order the correct side for your boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this hinge on the starboard actuator instead?\u003c\/strong\u003e No. The 6BT500866800 hinge is built specifically for the port side and is not interchangeable with the starboard actuator hinge, which is a distinct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is this actuator hinge?\u003c\/strong\u003e The port actuator hinge, 6BT500866800, is finished in red.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this part?\u003c\/strong\u003e The Bennett port actuator hinge measures 11 inches long by 5 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this hinge weigh?\u003c\/strong\u003e It weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hinge include the coil, or do I need to buy that separately?\u003c\/strong\u003e The coil is included with this hinge -- it is sold as a single hinge-with-coil assembly, part number 6BT500866800.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Bennett Marine part?\u003c\/strong\u003e Yes, this is a genuine Bennett Marine part, sold under Bennett Marine part number 6BT500866800.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat trim tab systems is this hinge compatible with?\u003c\/strong\u003e This upper actuator hinge is designed for use with Bennett trim tab actuators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation of this hinge something I can do myself?\u003c\/strong\u003e The 6BT500866800 hinge is a direct component of the Bennett trim tab actuator assembly and is intended to replace the existing upper hinge at that same mounting point on the actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this part?\u003c\/strong\u003e You receive one Bennett upper actuator hinge with coil, port side, in red -- part number 6BT500866800.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451027675,"sku":"BEN-CC3003-P","price":42.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CC3003P.2__83559.1737868118.500.750.jpg?v=1785163395"},{"product_id":"bennett-es2000-euro-style-hydraulic-trim-tab-rocker-switch-black","title":"Bennett ES2000 Euro Style Hydraulic Trim Tab Rocker Switch, Black","description":"\u003cp\u003eThe Bennett ES2000 Euro Style Hydraulic Trim Tab Rocker Switch is a helm-mounted control for operating Bennett hydraulic trim tabs. It is ergonomically designed and water resistant, and it delivers a positive audible click each time the trim tabs are engaged so the operator gets clear tactile confirmation of tab movement. A lock-out feature prevents the switch from being pressed in opposite directions at the same time, protecting the hydraulic system from conflicting commands.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the ES2000 fits into any existing Bennett 2 1\/2-inch rocker switch hole, so it can be installed at the helm without cutting a new opening. It uses a rocker-style actuator with a normally open contact and a screw terminal connector, and it is rated to an IP54 level of protection against dust and water intrusion at the panel. The switch body is molded from durable plastic and finished in black to match most helm panels.\u003c\/p\u003e\u003cp\u003eThis is a single-station control. Boats with a second helm or bridge station that need an additional switch with a longer harness should use the Bennett ES2000A, which is a separate part number built for that application and includes 20 feet of wire harness.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ES2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Screw Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 9 x 7 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285317051\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe ES2000 is designed to fit into any existing Bennett 2 1\/2-inch rocker switch hole, making it a direct fit for helm panels already cut for a Bennett rocker switch.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett ES2000 used for?\u003c\/strong\u003e The Bennett ES2000 is a Euro Style Hydraulic Trim Tab Rocker Switch that mounts at the helm and controls a boat's Bennett hydraulic trim tabs, giving a positive click each time the tabs are engaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the ES2000 fit my existing switch panel cutout?\u003c\/strong\u003e Yes. The ES2000 is built to fit into any existing Bennett 2 1\/2-inch rocker switch hole, so it installs without cutting a new opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ES2000 water resistant?\u003c\/strong\u003e The Bennett ES2000 is water resistant and carries an IP54 protection rating, guarding against dust and water at the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the ES2000 come in?\u003c\/strong\u003e This switch is black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ES2000 rocker switch made from?\u003c\/strong\u003e The ES2000 switch body is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES2000 prevent both trim tab directions from being pressed at once?\u003c\/strong\u003e Yes, the Bennett ES2000 has a lock-out feature that prevents the operator from pressing the switch in opposite directions at the same time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many positions does the ES2000 rocker have?\u003c\/strong\u003e The ES2000 rocker switch has 2 positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the ES2000 and the ES2000A?\u003c\/strong\u003e The ES2000 is a single-station switch, while the ES2000A is a separate part number designed as a second-station control that includes 20 feet of wire harness for bridge applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of electrical contact and connector does the ES2000 use?\u003c\/strong\u003e The Bennett ES2000 uses a normally open contact with a screw terminal connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett ES2000 weigh?\u003c\/strong\u003e The Bennett ES2000 Euro Style Rocker Switch weighs 0.45 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES2000 give feedback when the trim tabs are engaged?\u003c\/strong\u003e Yes, the switch provides a positive audible click each time the trim tabs are engaged, confirming operation to the driver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Bennett ES2000?\u003c\/strong\u003e The Bennett ES2000 Euro Style Hydraulic Trim Tab Rocker Switch carries UPC 666285317051.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451060443,"sku":"BEN-ES2000","price":100.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ES2000__63148.1737826897.500.750.jpg?v=1785163395"},{"product_id":"bennett-es2000a-euro-style-trim-tab-rocker-switch-second-station-bridge-control-with-20-ft-wire-harness","title":"Bennett ES2000A Euro Style Trim Tab Rocker Switch - Second Station Bridge Control with 20 ft Wire Harness","description":"\u003cp\u003eThe Bennett ES2000A Euro Style Trim Tab Rocker Switch is a second-station bridge control designed for boats with a helm on an upper deck or bridge, letting a second operator adjust hydraulic trim tabs from that station. It ships with a 20 foot wire harness so it can be run from the bridge back to the boat's existing Bennett trim tab wiring, and it installs into any existing Bennett 2 1\/2-inch rocker switch hole for a straightforward retrofit or upgrade.\u003c\/p\u003e\u003cp\u003eThe switch has an ergonomic, low-profile Euro-style rocker design that gives a positive, tactile click each time the trim tabs are engaged, so the operator gets clear physical feedback without needing to watch the tabs. A built-in lock-out feature prevents the operator from pressing the switch in opposite directions at the same time, protecting the hydraulic actuators from conflicting commands. The rocker body is water resistant, holding up to spray and wet conditions typical of a bridge or open helm station, and it is finished in a beige color to blend with common helm panel finishes.\u003c\/p\u003e\u003cp\u003eConstruction is plastic with nickel contacts and quick-connect terminals for a clean wiring installation, and the switch operates on a normally-open, 1-way circuit with a single rocker position. Because it fits the standard Bennett rocker switch cutout, it works alongside existing Bennett hydraulic trim tab systems without requiring a new panel hole.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ES2000A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285317150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Harness Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Hole Size:\u003c\/strong\u003e 2 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Type:\u003c\/strong\u003e Normally Open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Nickel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Quick-connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Rocker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions (L x W x H):\u003c\/strong\u003e 14 x 14 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.75 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits any existing Bennett 2 1\/2-inch rocker switch hole\u003c\/li\u003e\n\u003cli\u003eWired for use as a second (bridge) station alongside an existing Bennett hydraulic trim tab control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett ES2000A rocker switch used for?\u003c\/strong\u003e The Bennett ES2000A is a second-station (bridge) rocker switch for controlling hydraulic trim tabs from an upper helm or bridge station, separate from the boat's main lower-station control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES2000A come with a wire harness?\u003c\/strong\u003e Yes, the ES2000A includes a 20 foot wire harness so it can be run from a bridge or second station back to the boat's existing Bennett trim tab wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size switch hole does the ES2000A fit?\u003c\/strong\u003e This switch fits into any existing Bennett 2 1\/2-inch rocker switch hole, so it drops into the standard Bennett cutout without needing a different-sized opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ES2000A waterproof?\u003c\/strong\u003e The ES2000A rocker switch has a water resistant design suited to exposed bridge and helm locations, carrying an IP54 ingress protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the ES2000 and the ES2000A?\u003c\/strong\u003e The ES2000 is the standard Euro Style trim tab rocker switch for a single (primary) station, while the ES2000A is the second-station version built for bridge applications and supplied with a 20 foot wire harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the ES2000A switch made of?\u003c\/strong\u003e The Bennett ES2000A rocker switch body is made of plastic, with nickel switch contacts and quick-connect terminals for wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES2000A have a lock-out feature?\u003c\/strong\u003e Yes, the ES2000A has a lock-out feature that prevents the operator from pressing the rocker in opposite directions at the same time, protecting the trim tab actuators from conflicting signals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the ES2000A give feedback when trim tabs are engaged?\u003c\/strong\u003e The ES2000A provides a positive audible and tactile click each time the trim tabs are engaged, so the operator knows the switch input has registered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Bennett ES2000A switch?\u003c\/strong\u003e The Bennett ES2000A rocker switch is finished in beige.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ES2000A rocker switch weigh?\u003c\/strong\u003e The Bennett ES2000A weighs 1.75 pounds as supplied with its 20 foot wire harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ES2000A easy to install?\u003c\/strong\u003e Yes, the ES2000A is designed for easy installation into an existing Bennett 2 1\/2-inch rocker switch hole using its included 20 foot wire harness and quick-connect terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of circuit does the ES2000A use?\u003c\/strong\u003e The ES2000A operates on a normally-open, 1-way circuit with a single rocker position.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451093211,"sku":"BEN-ES2000A","price":134.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ES2000__04933.1718945254.500.750.jpg?v=1785163395"},{"product_id":"bennett-h1170a-hydraulic-trim-tab-hardware-pack-brass-fittings-and-mounting-hardware-kit","title":"Bennett H1170A Hydraulic Trim Tab Hardware Pack - Brass Fittings and Mounting Hardware Kit","description":"\u003cp\u003eThe Bennett H1170A Hydraulic Trim Tab Hardware Pack is a complete set of hydraulic fittings and mounting hardware for installing or servicing Bennett hydraulic trim tab systems. It brings together the small parts that are easy to lose track of or run short on during an install: brass hydraulic fittings for the tubing runs, a mounting bracket for the power unit, and the full range of screws and hangers needed to secure the hydraulic lines and hardware in place.\u003c\/p\u003e\u003cp\u003eThe pack includes two 3-inch brass pipe nipples and two brass female elbows for making up the hydraulic tubing connections, plus two tube bending clips to help route and shape the hydraulic lines cleanly. Eight nylon hangers are included for securing tubing and wiring runs along the way. Mounting hardware covers six #14 x 1 1\/2-inch full-threaded screws, four 1\/4-20 x 3\/4-inch machine screws, and a mounting bracket with its own four #10 x 1-inch full-threaded screws, along with two nuts with ferrules for finishing hydraulic connections. This makes the H1170A a practical restock or spares kit for anyone installing, servicing, or replacing hardware on a Bennett hydraulic trim tab system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e H1170A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285325308\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Trim Tab Hardware Pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass, Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hydraulic Fittings:\u003c\/strong\u003e Two 3 inch brass pipe nipples, two brass female elbows, two tube bending clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Fasteners:\u003c\/strong\u003e Six #14 x 1 1\/2 inch full-threaded screws, four 1\/4-20 x 3\/4 inch machine screws, four #10 x 1 inch full-threaded screws (mounting bracket)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Hardware:\u003c\/strong\u003e Eight nylon hangers, one mounting bracket, two nuts with ferrules\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bennett H1170A Hydraulic Trim Tab Hardware Pack?\u003c\/strong\u003e The H1170A includes two 3 inch brass pipe nipples, two brass female elbows, two tube bending clips, six #14 x 1 1\/2 inch full-threaded screws, four 1\/4-20 x 3\/4 inch machine screws, eight nylon hangers, one mounting bracket with four #10 x 1 inch full-threaded screws, and two nuts with ferrules.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the H1170A hardware pack used for?\u003c\/strong\u003e It is a hardware kit for installing or servicing Bennett hydraulic trim tab systems, supplying the brass hydraulic fittings, mounting bracket, and fasteners needed for the hydraulic tubing and hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the H1170A pack include the hydraulic actuators or trim tab planes?\u003c\/strong\u003e No. The Bennett H1170A is a hardware pack of fittings and fasteners only; it does not include the hydraulic actuators, hydraulic power unit, or trim plane assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many brass pipe nipples come in the H1170A hardware pack?\u003c\/strong\u003e Two 3 inch brass pipe nipples are included in the Bennett H1170A Hydraulic Trim Tab Hardware Pack, along with two matching brass female elbows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett H1170A hardware pack weigh?\u003c\/strong\u003e The Bennett H1170A Hydraulic Trim Tab Hardware Pack weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the mounting bracket in the H1170A pack used for?\u003c\/strong\u003e The included mounting bracket, secured with four #10 x 1 inch full-threaded screws, is provided for mounting hardware associated with the Bennett hydraulic trim tab installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the fittings in the H1170A pack made of brass?\u003c\/strong\u003e Yes. The pipe nipples and female elbows in the Bennett H1170A hardware pack are brass, and the included hangers are nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the tube bending clips used for in this kit?\u003c\/strong\u003e The two tube bending clips included with the Bennett H1170A are used to help route and shape the hydraulic tubing on a Bennett trim tab installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screws are included with the Bennett H1170A hardware pack?\u003c\/strong\u003e The pack includes six #14 x 1 1\/2 inch full-threaded screws, four 1\/4-20 x 3\/4 inch machine screws, and four #10 x 1 inch full-threaded screws for the mounting bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Bennett H1170A a genuine Bennett part?\u003c\/strong\u003e Yes. The H1170A is a Bennett-branded hydraulic trim tab hardware pack, identified by Bennett part number H1170A and UPC 666285325308.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the nuts with ferrules in the H1170A pack for?\u003c\/strong\u003e The two nuts with ferrules included in the Bennett H1170A hardware pack are used to finish and secure hydraulic tubing connections.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451125979,"sku":"BEN-H1170A","price":38.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ben-h1170a_large__12355.1725893793.500.750.jpg?v=1785163395"},{"product_id":"bennett-hydraulic-to-bolt-electric-trim-tab-conversion-kit-6bt500404200","title":"Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit 6BT500404200","description":"\u003cp\u003eThe Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit (6BT500404200) lets you upgrade from standard Bennett hydraulic trim tab actuators to Bennett's BOLT electric actuators without rewiring your boat or drilling new holes. The kit is built to reuse your existing wiring, rocker switch, and trim planes, so the conversion goes in using components you already have installed. It connects with a plug 'n play fit to your existing standard Bennett rocker switch, and it works with standard Bennett hydraulic single actuator systems, including the A1101A and A1101ARC.\u003c\/p\u003e\u003cp\u003eEach kit includes two 12V BOLT actuators with 6 ft wire harnesses, two adjustable upper hinges, a relay module with built-in Auto Tab Retraction (ATR), two lower hinges, and a hardware bag. The Auto Tab Retraction feature automatically retracts the tabs when the ignition is turned off, and the relay module includes a diagnostics feature that simplifies both installation and troubleshooting down the road. Bennett's BOLT actuators are fully waterproof, submersible, and maintenance-free once installed.\u003c\/p\u003e\u003cp\u003eThis conversion kit is backed by Bennett's lifetime limited warranty on the BOLT actuators. It is intended for boat owners who already run a standard Bennett hydraulic trim tab system and want the reliability of electric BOLT actuators without replacing their trim planes or control switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500404200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285600276\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Standard Bennett hydraulic single actuator systems (A1101A and A1101ARC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime limited warranty (Bennett BOLT actuators)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e 2 BOLT 12V actuators with 6 ft wire harnesses, 2 adjustable upper hinges, 1 relay module with built-in Auto Tab Retraction, 2 lower hinges, 1 hardware bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit do?\u003c\/strong\u003e This conversion kit allows you to convert from standard Bennett hydraulic trim tab actuators to Bennett BOLT electric actuators. It is designed to simplify the upgrade process while allowing you to continue using key existing trim tab components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to rewire my boat or drill new holes to install this kit?\u003c\/strong\u003e No, the Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit is designed so no rewiring or drilling of new holes is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich existing components can I reuse with this conversion kit?\u003c\/strong\u003e This conversion kit is designed to use your existing wiring, rocker switch, and trim planes, which helps make the conversion faster and avoids unnecessary replacement of compatible components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Bennett hydraulic actuator systems is the 6BT500404200 conversion kit compatible with?\u003c\/strong\u003e This kit is compatible with standard Bennett hydraulic single actuator systems, specifically the A1101A and A1101ARC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this conversion kit?\u003c\/strong\u003e The kit includes two 12V BOLT actuators with 6 ft wire harnesses, two adjustable upper hinges, one relay module with built-in Auto Tab Retraction, two lower hinges, and a hardware bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the conversion kit include a trim tab control?\u003c\/strong\u003e No, this kit uses your existing standard Bennett rocker switch through a plug 'n play connection; a BOLT-style control is sold separately if you want to upgrade the control unit as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Auto Tab Retraction and does this kit have it?\u003c\/strong\u003e Yes, the relay module included with the Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit is equipped with Auto Tab Retraction, which automatically retracts the tabs when the ignition is turned off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this conversion kit waterproof?\u003c\/strong\u003e Yes, the Bennett BOLT actuators included in this kit are completely waterproof, submersible, and maintenance-free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett BOLT conversion kit?\u003c\/strong\u003e The Bennett BOLT actuators included with this conversion kit are backed by Bennett's lifetime limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the diagnostics feature on this kit work?\u003c\/strong\u003e The relay module included with the 6BT500404200 conversion kit has a built-in diagnostics feature that helps simplify installation and troubleshooting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this conversion kit weigh?\u003c\/strong\u003e The Bennett Hydraulic to BOLT Electric Trim Tab Conversion Kit weighs 9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I still use my current trim planes after installing this kit?\u003c\/strong\u003e Yes, this conversion kit is designed to work with your existing trim planes, so they do not need to be replaced during the upgrade to BOLT electric actuators.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451158747,"sku":"BEN-HYDBOLTCON","price":376.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/BEN-HYDBOLTCON__80556.1722500625.500.750.jpg?v=1785163398"},{"product_id":"bennett-complete-sport-10-x-12-inch-hydraulic-trim-tab-kit-m120-for-boats-20-23-feet","title":"Bennett Complete Sport 10 x 12 Inch Hydraulic Trim Tab Kit (M120) for Boats 20-23 Feet","description":"\u003cp\u003eThe Bennett Complete Sport 10\" x 12\" Hydraulic Trim Tab Kit (M120) is a complete hydraulic trim tab system built to help a boat get on plane faster and stay on plane at intermediate speeds. Staying on plane longer improves fuel efficiency and speed, while the tabs can also correct uneven loading by lifting the side of the boat that is weighed down more than the other. This kit is sized for boats 20 to 23 feet and is recommended for use on flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003eEach kit includes two trim plane assemblies and two A1200SRC hydraulic actuators. The actuators are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tabs into position. All hydraulic lines and wires for the actuators are internal, concealed by the upper hinge, so they are not exposed to harsh marine environments. Power comes from a V351HPU1 hydraulic power unit, controlled at the helm by a Euro Style Rocker Control Unit that includes its own wiring. A hardware bag and 20 feet of hydraulic tubing are included for a complete installation. The system is easy to install and service and requires minimal maintenance over its lifespan. It is backed by a 5 Year No-Hassle Warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500422200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e M120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 to 23 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Material:\u003c\/strong\u003e Nylon\/fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e A1200SRC (quantity 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Unit:\u003c\/strong\u003e Euro Style Rocker Control Unit with wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year No-Hassle Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285146606\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 20 to 23 feet in length\u003c\/li\u003e\n\u003cli\u003eSuited to flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett M120 Complete Sport 10 x 12 Hydraulic Trim Tab Kit designed to do?\u003c\/strong\u003e It is a complete hydraulic trim tab system that helps a boat get on plane faster and stay on plane at intermediate speeds, which improves fuel efficiency and speed and can correct uneven loading by lifting the side of the boat that sits lower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Bennett M120 hydraulic trim tab kit made for?\u003c\/strong\u003e This 10 inch by 12 inch trim tab kit is recommended for boats 20 to 23 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bennett M120 trim tab kit?\u003c\/strong\u003e The kit includes two trim plane assemblies, two A1200SRC hydraulic actuators, one V351HPU1 hydraulic power unit, a Euro Style Rocker Control Unit with wiring, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the trim tab actuators made of?\u003c\/strong\u003e The two A1200SRC actuators included with the M120 kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hydraulic lines and wires exposed on the Bennett M120 trim tabs?\u003c\/strong\u003e No. On the M120 kit, all hydraulic lines and wires for the actuators are internal and concealed by the upper hinge, so they are not exposed to harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of boats can use the Bennett M120 Sport Trim Tab Kit?\u003c\/strong\u003e Bennett recommends this kit for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Bennett M120 kit control uneven boat loading?\u003c\/strong\u003e If one side of the boat is weighed down more than the other, the M120 trim tabs correct the imbalance by providing lift on the opposite side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat control unit comes with the Bennett M120 hydraulic trim tab kit?\u003c\/strong\u003e The M120 kit ships with a Euro Style Rocker Control Unit, including its wiring, for operating the trim tabs from the helm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett M120 trim tab kit weigh?\u003c\/strong\u003e The complete Bennett M120 10 x 12 hydraulic trim tab kit weighs 20.25 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much maintenance does the Bennett M120 trim tab system require?\u003c\/strong\u003e Bennett designed the M120 hydraulic trim tabs to be easy to install and service, and they require minimal maintenance during their lifespan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett M120 Complete Sport Trim Tab Kit?\u003c\/strong\u003e The Bennett M120 kit is backed by a 5 Year No-Hassle Warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bennett M120 different from the Bennett M80 trim tab kit?\u003c\/strong\u003e The M120 uses 10 inch by 12 inch trim tabs for boats 20 to 23 feet, while the Bennett M80 uses smaller 8 inch by 10 inch trim tabs for boats 17 to 20 feet.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451191515,"sku":"BEN-M120","price":852.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/M120Kit__94460.1739460029.500.750.jpg?v=1785163399"},{"product_id":"bennett-marine-6bt501107900-m120obi-sport-10-x-12-inch-hydraulic-trim-tab-kit-with-all-in-one-control","title":"Bennett Marine 6BT501107900 M120OBI Sport 10 x 12 Inch Hydraulic Trim Tab Kit with All-in-One Control","description":"\u003cp\u003eThe Bennett Marine M120OBI Sport Hydraulic Trim Tab Kit (6BT501107900) is a complete 10 inch x 12 inch hydraulic trim tab system built for boats 20 to 23 feet. It uses Bennett's sport batwing tab design, which provides 30% more lift than conventional trim tabs and is ideal for boats with limited transom space. On the water, the tabs help a boat get on plane faster and stay on plane at intermediate speeds, correct uneven loads and side-to-side listing, reduce pounding, eliminate porpoising, and improve forward visibility and safety while also increasing fuel efficiency.\u003c\/p\u003e\u003cp\u003eThe kit includes two 10 inch x 12 inch trim tab plane assemblies driven by two A1200SRC hydraulic actuators, which are strong, flexible nylon and fiberglass hydraulic cylinders that push the tabs into position. A V351HPU1 hydraulic power unit, 20 feet of hydraulic tubing, and all mounting hardware are included. All hydraulic lines and wires for the actuators are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments and reducing maintenance needs over the life of the system.\u003c\/p\u003e\u003cp\u003eThis kit also includes Bennett's All-in-One Indicator Control, a stand-alone helm control with no external control box required. It features convenient All Up and All Down buttons, trim tab position LEDs, and auto tab retraction so the tabs raise automatically when the ignition is powered off. It is recommended for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT501107900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBennett Part Number:\u003c\/strong\u003e M120OBI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Part Number:\u003c\/strong\u003e 6BT-50042-25-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 20 to 23 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 27 x 15 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon and fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Unit:\u003c\/strong\u003e All-in-One Indicator Control with All Up and All Down buttons and auto tab retraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e (2) A1200SRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600573\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tabs; 3 year warranty on the All-in-One control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett M120OBI kit?\u003c\/strong\u003e Each trim tab plane in the Bennett Marine M120OBI kit (6BT501107900) measures 10 inches wide by 12 inches deep, and the kit includes two of them, one per side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat sizes is this trim tab kit designed for?\u003c\/strong\u003e The Bennett M120OBI 10 x 12 inch hydraulic trim tab kit is sized for boats 20 to 23 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett M120OBI kit include a helm control?\u003c\/strong\u003e Yes, this kit includes Bennett's All-in-One Indicator Control, a stand-alone helm control with All Up and All Down buttons, trim tab position LEDs, and auto tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is everything included in the box?\u003c\/strong\u003e The 6BT501107900 kit includes two 10 x 12 inch trim tab plane assemblies, two A1200SRC hydraulic actuators, one V351HPU1 hydraulic power unit, 20 feet of hydraulic tubing, mounting hardware, and the All-in-One Indicator Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this trim tab kit weigh?\u003c\/strong\u003e The Bennett M120OBI Sport Hydraulic Trim Tab Kit weighs 23 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the sport batwing design different from a standard Bennett trim tab?\u003c\/strong\u003e The batwing tab design used on the Bennett M120OBI provides 30% more lift than conventional trim tabs and is built for boats with limited transom space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hydraulic lines and wiring exposed to the water?\u003c\/strong\u003e No. On the Bennett M120OBI kit, all hydraulic lines and wires for the actuators run internally and are concealed by the upper hinge, protecting them from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the actuators made of?\u003c\/strong\u003e The A1200SRC hydraulic actuators included with the Bennett M120OBI kit are built from strong, flexible nylon and fiberglass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boat types is this Bennett trim tab kit recommended for?\u003c\/strong\u003e Bennett recommends this sport trim tab kit for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the Bennett M120OBI trim tab kit?\u003c\/strong\u003e The trim tabs in the 6BT501107900 kit carry a limited lifetime warranty, and the included All-in-One Indicator Control carries a 3 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the trim tab position show at the helm?\u003c\/strong\u003e Yes, the All-in-One Indicator Control included with this kit has trim tab position LEDs so you can always see where the tabs are set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the tabs retract automatically?\u003c\/strong\u003e Yes, the All-in-One control on the Bennett M120OBI kit includes auto tab retraction, so the tabs raise automatically when the ignition is powered off.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451224283,"sku":"BEN-M120OBI","price":1311.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/M120OBI__59393.1725462375.500.750.jpg?v=1785163398"},{"product_id":"bennett-m80-complete-sport-8-x-10-hydraulic-trim-tab-kit-for-boats-17-20-ft","title":"Bennett M80 Complete Sport 8\" x 10\" Hydraulic Trim Tab Kit for Boats 17-20 ft","description":"\u003cp\u003eThe Bennett M80 Complete Sport Hydraulic Trim Tab Kit is a full boat trim tab system built to help your boat get on plane faster and stay on plane at intermediate speeds. By keeping the hull on plane longer, the M80 system improves fuel efficiency and speed while also giving you a way to correct uneven loading -- if one side of your boat sits lower than the other, the tabs provide lift on the opposite side to level the ride and improve visibility and safety at the helm.\u003c\/p\u003e\u003cp\u003eEach M80 kit includes two 8 inch wide by 10 inch deep trim tab planes driven by two A1200SRC hydraulic actuators. These actuators are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tabs into position, and all of the hydraulic lines and wiring run internally, concealed by the upper hinge, so they are not exposed to harsh marine environments. A Euro Style Rocker Control Unit with wiring is included to operate the system from the helm, along with the V351HPU1 hydraulic power unit, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003eThis kit is sized for boats 17 to 20 feet and is recommended for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers. It is easy to install and service and requires minimal maintenance over its lifespan, and it is backed by a 5 Year No-Hassle Warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500423200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Size:\u003c\/strong\u003e 8 inches wide x 10 inches deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 17 to 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Material:\u003c\/strong\u003e Nylon\/fiberglass hydraulic cylinders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e V351HPU1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Actuators:\u003c\/strong\u003e A1200SRC (2 included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Unit:\u003c\/strong\u003e Euro Style Rocker Control Unit with wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 Year No-Hassle Warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 2 trim plane assemblies, 2 A1200SRC hydraulic actuators, 1 V351HPU1 hydraulic power unit, 1 Euro Style Rocker Control Unit with wiring, 1 hardware bag, 20 feet of hydraulic tubing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Bennett M80 trim tab kit?\u003c\/strong\u003e The Bennett M80 Complete Sport Hydraulic Trim Tab Kit (part number 6BT500423200) includes two 8 inch x 10 inch trim plane assemblies, two A1200SRC hydraulic actuators, one V351HPU1 hydraulic power unit, a Euro Style Rocker Control Unit with wiring, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the M80 kit designed for?\u003c\/strong\u003e Boats between 17 and 20 feet are the recommended range for the Bennett M80 8 inch x 10 inch trim tab kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big are the trim tabs in this kit?\u003c\/strong\u003e Each trim tab in the Bennett M80 kit measures 8 inches wide by 10 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hydraulic lines and wires exposed to the elements?\u003c\/strong\u003e No. On the Bennett M80 system all hydraulic lines and wires run internally and are concealed by the upper hinge, keeping them protected from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problem do these trim tabs solve if my boat lists to one side?\u003c\/strong\u003e Uneven loading that causes a boat to list to one side can be corrected with the Bennett M80 trim tabs, which provide lift on the opposite side to level the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bennett M80 trim tab kit?\u003c\/strong\u003e A 5 Year No-Hassle Warranty covers the Bennett M80 Complete Sport Hydraulic Trim Tab Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat control unit operates the M80 trim tabs?\u003c\/strong\u003e A Euro Style Rocker Control Unit, included with wiring, operates the Bennett M80 hydraulic trim tab system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the actuators made of?\u003c\/strong\u003e The two A1200SRC hydraulic actuators included with the Bennett M80 kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of boats can use this trim tab kit?\u003c\/strong\u003e The Bennett M80 kit is recommended for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and ribs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the M80 trim tab kit weigh?\u003c\/strong\u003e The Bennett M80 Complete Sport Hydraulic Trim Tab Kit weighs 17.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill installing this kit improve fuel efficiency?\u003c\/strong\u003e Yes, staying on plane longer with the Bennett M80 trim tabs increases fuel efficiency along with speed and visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the hydraulic tubing included with the kit?\u003c\/strong\u003e The Bennett M80 kit includes 20 feet of hydraulic tubing along with the trim plane assemblies, actuators, and power unit.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451257051,"sku":"BEN-M80","price":802.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-M80-Complete-Sport-Hydraulic-Trim-Tab-Kit__61915.1739477220.500.750.jpg?v=1785163400"},{"product_id":"bennett-obi9000-h-all-in-one-hydraulic-trim-tab-switch-with-position-indicator-leds","title":"Bennett OBI9000-H All-in-One Hydraulic Trim Tab Switch with Position Indicator LEDs","description":"\u003cp\u003eThe Bennett OBI9000-H All-in-One Hydraulic Trim Tab Switch is a stand-alone helm control built for hydraulic trim tab systems. Unlike controls that require a separate external control box, the OBI9000-H integrates all of its functionality directly into a single, space-saving keypad, simplifying both installation and the look of your helm. The keypad features convenient All Up and All Down buttons for quick, one-touch trim adjustments, along with trim tab position LEDs that let you see exactly where your tabs are at all times without guessing. An auto tab retraction feature automatically raises the trim tabs when the ignition is powered off, helping protect the tabs and simplifying your shutdown routine. The control is designed to accommodate both new trim tab installations and common retrofit installations, and it is compatible with other trim tab system brands, making it a practical upgrade or replacement option for existing hydraulic setups. The kit includes the helm control with a 3 foot cable, waterproof cables, and two upper hinge screw-on sensors, giving you what you need to connect the control to your hydraulic trim tab actuators. Its easy-to-install single lock nut design keeps mounting straightforward for DIY installers and marine technicians alike.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e OBI9000-H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600375\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Sensors:\u003c\/strong\u003e 2 upper hinge screw-on sensors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Single lock nut design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Compatible with other trim tab system brands\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett OBI9000-H All-in-One Hydraulic Trim Tab Switch do?\u003c\/strong\u003e The Bennett OBI9000-H is a stand-alone helm control for hydraulic trim tab systems, combining All Up and All Down buttons with position-indicator LEDs in a single space-saving keypad that requires no external control unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the OBI9000-H compatible with hydraulic or electric trim tab systems?\u003c\/strong\u003e The Bennett OBI9000-H is designed for hydraulic trim tab systems. It is also compatible with other trim tab system brands, making it suitable as a retrofit or replacement control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett OBI9000-H show trim tab position?\u003c\/strong\u003e Yes. Trim tab position LEDs on the OBI9000-H keypad always show where the trim tabs are positioned so you do not have to guess while underway.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this switch retract the tabs automatically?\u003c\/strong\u003e Yes, the OBI9000-H includes auto tab retraction, which raises the trim tabs when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bennett OBI9000-H kit?\u003c\/strong\u003e The OBI9000-H includes one helm control with a 3 foot cable, waterproof cables, and two upper hinge screw-on sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett OBI9000-H weigh?\u003c\/strong\u003e The Bennett OBI9000-H All-in-One Hydraulic Trim Tab Switch weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the OBI9000-H be used for a new trim tab installation or only a retrofit?\u003c\/strong\u003e The OBI9000-H is designed to accommodate both new trim tab installations and common retrofit installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Bennett OBI9000-H mounted at the helm?\u003c\/strong\u003e It uses an easy-to-install single lock nut design, making it simple to mount into a helm panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the OBI9000-H require a separate control box?\u003c\/strong\u003e No. The OBI9000-H is an all-in-one unit, with all control functionality built directly into the keypad, so no external control unit is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Bennett OBI9000-H work with trim tab systems from other manufacturers?\u003c\/strong\u003e Yes, the Bennett OBI9000-H is compatible with other trim tab system brands in addition to Bennett hydraulic systems.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451289819,"sku":"BEN-OBI9000-H","price":462.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/OBI9000-H__32687.1722507910.500.750.jpg?v=1785163401"},{"product_id":"bennett-bolt-electric-trim-tab-switch-w-led-integrated-helm-control-908914091000","title":"Bennett BOLT Electric Trim Tab Switch w\/LED, Integrated Helm Control 908914091000","description":"\u003cp\u003eThe Bennett BOLT Electric Trim Tab Switch is an all-in-one integrated helm control built for electric trim tab systems. Unlike traditional setups that require a separate control box mounted elsewhere on the boat, this switch has its control electronics engineered directly into a single, compact keypad, so installation is simple and the helm stays clean and space-saving. Trim tab position LEDs built into the keypad let the operator see exactly where the tabs are set at a glance, taking the guesswork out of trim adjustment. An auto tab retraction feature automatically raises the tabs whenever the ignition is powered off, protecting the tabs and simplifying trailering or dockside shutdown. Operation is handled through simple, clearly marked All Up and All Down buttons for quick, intuitive control underway.\u003c\/p\u003e\u003cp\u003eThis helm control is designed for electric trim tab systems only, and it is also compatible with other trim tab system brands, making it a practical option for both new installations and retrofits on boats already running electric tabs. It comes complete with a 3 foot wire harness and waterproof plug-and-play connectors, along with a backing fastener, so it mounts and wires in without splicing into unfamiliar wiring. A drilling template is included with the installation instructions to guide helm panel cutouts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 908914091000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285222904\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 8.19 x 6.1 x 3.15 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Waterproof plug-and-play connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Helm control, 3 foot wire harness, waterproof plug-and-play connectors, backing fastener\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Compatible with other electric trim tab system brands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e All Up \/ All Down buttons, trim tab position LEDs, auto tab retraction on ignition off\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett BOLT Electric Trim Tab Switch do?\u003c\/strong\u003e It operates an electric trim tab system from a single integrated helm control, with the control electronics built directly into the keypad rather than a separate external box. The Bennett BOLT switch (part number 908914091000) provides All Up and All Down buttons plus trim tab position LEDs from one compact unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch compatible with electric or hydraulic trim tab systems?\u003c\/strong\u003e This helm control is designed for electric trim tab systems only. It is also compatible with other trim tab system brands, so it can be used as a replacement or upgrade control on supported electric tab setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the switch show where the trim tabs are positioned?\u003c\/strong\u003e Yes, built-in trim tab position LEDs on the keypad show the operator exactly where the tabs are set at any time, without needing to look at the tabs themselves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the tabs retract automatically when the boat is shut off?\u003c\/strong\u003e Yes, the Bennett BOLT switch includes an auto tab retraction feature that raises the trim tabs whenever the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this helm control?\u003c\/strong\u003e The kit includes the helm control keypad, a 3 foot wire harness, waterproof plug-and-play connectors, and a backing fastener for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the included wiring?\u003c\/strong\u003e The unit ships with a 3 foot wire harness terminated in waterproof plug-and-play connectors for a straightforward helm installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing this switch require a separate control box?\u003c\/strong\u003e No. Unlike older two-piece systems, this is a stand-alone integrated helm control (908914091000) with the control electronics built into the keypad itself, so no external control unit is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a drilling template provided for mounting?\u003c\/strong\u003e Yes, a drilling template is included with the printed installation instructions to help lay out the helm panel cutout before mounting the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the physical dimensions of the switch?\u003c\/strong\u003e The Bennett BOLT helm control measures 8.19 x 6.1 x 3.15 inches and weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this switch be used to upgrade an existing electric trim tab installation?\u003c\/strong\u003e Yes, because it is compatible with other electric trim tab system brands, it works well as a retrofit upgrade for boats that already have an electric tab system installed.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027451322587,"sku":"BEN-OBI9000E","price":502.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/OBI9000-I__43444.1722384943.500.750.jpg?v=1785163401"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/collections\/Pro-Troller__96755.1726243505.500.750.jpg?v=1785359963","url":"https:\/\/www.goodvibesmarina.com\/collections\/gvcat-trim-tilt-jack-plates-trim-tabs.oembed","provider":"Good Vibes Marina","version":"1.0","type":"link"}