{"product_id":"anderson-4-way-flat-wishbone-trailer-wire-harness-25-foot-split-harness-v5425y","title":"Anderson 4-Way Flat Wishbone Trailer Wire Harness, 25 Foot Split Harness (V5425Y)","description":"\u003cp\u003eThe Anderson 4-Way Flat Wishbone Trailer Wire Harness is a 25 foot split wiring harness built to run trailer lighting from the tow vehicle connector down each side of the trailer frame. The harness splits at the trailer tongue into a wishbone configuration, letting each leg run along its own frame rail to the rear lights, which keeps wiring routed cleanly along the trailer structure instead of running a single line down the center. It terminates in a flat four-way plug and includes a trunk connector for tie-in at the rear of the trailer.\u003c\/p\u003e\u003cp\u003eConstruction uses color-coded, four-conductor wire that meets SAE J1128 specifications, so each circuit (ground, tail\/running lights, left turn\/brake, right turn\/brake) is easy to identify during installation or troubleshooting. The flat four-way plug itself meets SAE J1239 specifications, matching the industry-standard flat connector used on most tow vehicles and trailers. The harness is made in the USA. Because it uses the standard flat four-way plug, it works with virtually any trailer wired for a four-way flat connector, making it a straightforward replacement for a damaged or worn-out factory harness or a build-out harness for a new trailer wiring job.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Anderson\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V5425Y\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailer Wire Harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Count:\u003c\/strong\u003e Four conductor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Flat four-way plug with trunk connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Standard:\u003c\/strong\u003e Meets SAE J1128 specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug Standard:\u003c\/strong\u003e Meets SAE J1239 specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper, Polyvinyl Chloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.75 x 7.5 x 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 044464925257\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Anderson V5425Y trailer wire harness used for?\u003c\/strong\u003e The Anderson V5425Y is a 25 foot, four-conductor trailer wire harness that splits at the trailer tongue and runs down each side of the frame to power the trailer's tail, brake, and turn signal lights through a flat four-way plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the V5425Y harness?\u003c\/strong\u003e It is a 25 foot split harness, with each leg running from the tongue-mounted trunk connector down its respective side of the trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of connector does this harness use?\u003c\/strong\u003e The Anderson V5425Y terminates in a flat four-way plug and includes a trunk connector, matching the standard flat four-pin connector used on most tow vehicles and trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this harness meet any wiring standards?\u003c\/strong\u003e Yes, the color-coded four-conductor wire in the V5425Y meets SAE J1128 specifications, and the flat four-way plug meets SAE J1239 specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the harness made of?\u003c\/strong\u003e The Anderson V5425Y harness uses copper conductors with a polyvinyl chloride (PVC) insulation\/housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this harness fit any trailer with a four-way flat connector?\u003c\/strong\u003e The V5425Y uses the industry-standard SAE J1239 flat four-way plug, so it is compatible with trailers wired for a standard four-way flat connector rather than a specific make or model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the wiring color-coded?\u003c\/strong\u003e Yes, the four conductors in the Anderson V5425Y are color-coded to SAE J1128 specifications, making it easier to identify ground, tail\/running, left turn\/brake, and right turn\/brake circuits during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Anderson V5425Y made?\u003c\/strong\u003e This harness is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the V5425Y harness?\u003c\/strong\u003e The V5425Y is supplied as a complete 25 foot split four-conductor harness with a flat four-way plug and a trunk connector; it does not include tail lights or mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the V5425Y harness weigh?\u003c\/strong\u003e The Anderson V5425Y weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the V5425Y be used to replace a worn-out trailer harness?\u003c\/strong\u003e Yes, since it is a standard flat four-way split harness meeting SAE J1128 and SAE J1239 specifications, the V5425Y can serve as a replacement for a damaged or deteriorated trailer wiring harness of the same connector type.\u003c\/p\u003e","brand":"Anderson","offers":[{"title":"Default Title","offer_id":49027431563483,"sku":"AND-V5425Y","price":20.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/V5425Y__64544.1722501627.500.750.jpg?v=1785163290","url":"https:\/\/www.goodvibesmarina.com\/products\/anderson-4-way-flat-wishbone-trailer-wire-harness-25-foot-split-harness-v5425y","provider":"Good Vibes Marina","version":"1.0","type":"link"}