{"product_id":"anderson-v941-led-trailer-rear-lighting-kit-for-trailers-under-80-inches-wide","title":"Anderson V941 LED Trailer Rear Lighting Kit for Trailers Under 80 Inches Wide","description":"\u003cp\u003eThe Anderson V941 LED Trailer Rear Lighting Kit is a complete, submersible tail lighting solution built for trailers under 80 inches wide. Instead of buying individual lights and connectors separately, this kit bundles everything needed to get a trailer's rear lighting road-ready in one package: one 840 LED tail light, one 840L LED tail light, a 20 foot trailer harness, a license bracket, mounting hardware, and installation instructions.\u003c\/p\u003e\u003cp\u003eBoth tail lights use solid state LED diodes rather than a filament bulb, so there is nothing inside to burn out or break from vibration. Anderson rates the diodes for a 100,000 hour service life, and the low amp draw design pulls less current than a comparable incandescent tail light setup, which is easier on a tow vehicle's electrical system. The lights are built with a fully sealed, submersible design intended to withstand launching and retrieving a trailer in water.\u003c\/p\u003e\u003cp\u003eThis kit is sized specifically for trailers under 80 inches in overall width. Anderson notes that front side marker lights and side reflectors are still required separately to meet DOT lighting requirements; this kit covers the rear tail, stop, and turn lighting and included harness, not the front or side marker lights.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Anderson\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e V941\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e LED Trailer Rear Lighting Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb Type:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Life:\u003c\/strong\u003e 100,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid state, fully sealed and submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e Low amp draw compared to incandescent lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e (1) 840 LED tail light, (1) 840L LED tail light, 20 foot trailer harness, license bracket, mounting hardware, installation instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrailer Width Fitment:\u003c\/strong\u003e Under 80 inches wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 3.25 x 12 x 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Color:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Material:\u003c\/strong\u003e Polycarbonate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage:\u003c\/strong\u003e 5 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 044464976006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailers under 80 inches in overall width\u003c\/li\u003e\n\u003cli\u003eFront side marker lights and side reflectors must be added separately to meet DOT requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat trailers is the V941 kit designed for?\u003c\/strong\u003e The Anderson V941 LED Trailer Rear Lighting Kit is designed for trailers under 80 inches in overall width; a wider trailer needs one of Anderson's over-80-inch kits instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with V941?\u003c\/strong\u003e This kit includes one 840 LED tail light, one 840L LED tail light, a 20 foot trailer harness, a license bracket, mounting hardware, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the tail lights in this kit submersible?\u003c\/strong\u003e Yes, both tail lights in the V941 kit have a fully sealed, submersible construction designed to hold up to being dunked when launching or retrieving a trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit meet DOT lighting requirements on its own?\u003c\/strong\u003e The V941 kit covers rear tail, stop, and turn lighting, but front side marker lights and side reflectors must be added separately to fully meet DOT requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the trailer harness included with V941?\u003c\/strong\u003e A 20 foot trailer harness is included with the Anderson V941 kit, along with the license bracket and mounting hardware needed for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these tail lights use bulbs that need replacing?\u003c\/strong\u003e No, the V941 kit uses solid state LED diodes rather than filament bulbs, so there is nothing inside the lights to burn out or break from vibration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of the LEDs in this kit?\u003c\/strong\u003e Anderson rates the LED diodes in the V941 kit for 100,000 hours of use, well beyond the typical service life of an incandescent trailer light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the V941 lighting kit weigh?\u003c\/strong\u003e The complete Anderson V941 kit weighs 2.28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color are the lenses on the V941 tail lights?\u003c\/strong\u003e The tail lights included in the V941 kit have red polycarbonate lenses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a license plate bracket included?\u003c\/strong\u003e Yes, a license bracket is included as part of the Anderson V941 kit alongside the two tail lights and harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the V941 kit and Anderson's over-80-inch kits like V944 or V947?\u003c\/strong\u003e V941 is sized for trailers under 80 inches wide and ships with a 20 foot harness, while the over-80-inch kits such as V944 and V947 use different tail lights and a longer 25 foot harness for wider trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the V941 kit draw a lot of current from the tow vehicle?\u003c\/strong\u003e No, the LED tail lights in the V941 kit have a low amp draw compared to incandescent lighting, which reduces the load on the tow vehicle's electrical system.\u003c\/p\u003e","brand":"Anderson","offers":[{"title":"Default Title","offer_id":49027431792859,"sku":"AND-V941","price":54.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/941__65579.1739462859.500.750.jpg?v=1785163293","url":"https:\/\/www.goodvibesmarina.com\/products\/anderson-v941-led-trailer-rear-lighting-kit-for-trailers-under-80-inches-wide","provider":"Good Vibes Marina","version":"1.0","type":"link"}