{"product_id":"attwood-14137-7-cooler-mounting-kit-4-corner-brackets-and-2-quick-connect-stretch-straps-for-boat-coolers","title":"Attwood 14137-7 Cooler Mounting Kit with 4 Corner Pieces and 2 Quick-Connect Stretch Straps","description":"\u003cp\u003eThe Attwood 14137-7 Cooler Mounting Kit secures a cooler to a boat deck or gunwale so it will not slide or shift while underway. The kit includes 4 plastic corner base pieces that cradle the bottom corners of the cooler, plus 2 quick-connect stretch straps that pull taut over the top to hold everything firmly in place. The quick-disconnect strap design makes it easy to release the straps when you need to open the cooler or remove it from the boat entirely, then reconnect them in seconds. Both the corner pieces and the elastic bungee-style straps are built to resist corrosion, making the kit suitable for continued exposure to marine conditions without rusting or breaking down. Installation is straightforward: the corner pieces fasten to the mounting surface with #8 screws, after which the cooler simply drops into place and the straps clip over the top. This is a one-size kit intended to work with a variety of cooler sizes and boat layouts rather than a single specific model, giving boat owners a simple way to keep a cooler from becoming a hazard in rough water or hard turns.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 14137-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cooler Mounting Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 4 corner pieces, 2 quick-connect stretch straps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Corner mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 8 x 12 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Type:\u003c\/strong\u003e #8 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Corrosion-resistant construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the Attwood 14137-7 Cooler Mounting Kit?\u003c\/strong\u003e The kit includes 4 plastic corner base pieces and 2 quick-connect stretch straps, everything needed to mount a cooler to a boat surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cooler mounting kit attach to the boat?\u003c\/strong\u003e The 4 corner pieces fasten to the mounting surface using #8 screws, and the cooler then sits inside them, secured on top by the 2 stretch straps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 14137-7 mounting kit corrosion resistant?\u003c\/strong\u003e Yes, both the corner pieces and the straps of the 14137-7 kit are built to resist corrosion for continued use in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the corner pieces made from?\u003c\/strong\u003e The corner base pieces in the Attwood 14137-7 kit are made from plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the straps release easily to remove the cooler?\u003c\/strong\u003e Yes, the 14137-7 kit uses a quick-disconnect strap design so the elastic stretch straps can be unclipped and reconnected without tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size cooler does the 14137-7 mounting kit fit?\u003c\/strong\u003e The Attwood 14137-7 is a one-size kit designed to accommodate a range of cooler sizes rather than one specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the mounting kit?\u003c\/strong\u003e The Attwood 14137-7 Cooler Mounting Kit measures 8 x 12 x 3 inches as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the cooler mounting kit weigh?\u003c\/strong\u003e The Attwood 14137-7 Cooler Mounting Kit weighs 0.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat screws are needed to install the mounting kit?\u003c\/strong\u003e The corner pieces of the 14137-7 kit are designed to be fastened down with #8 screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many straps come with the Attwood 14137-7 kit?\u003c\/strong\u003e Two quick-connect stretch straps are included with the Attwood 14137-7 Cooler Mounting Kit, one for each side of the cooler.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the mounting kit prevent damage to the boat and cooler?\u003c\/strong\u003e Yes, by holding the cooler firmly in one spot, the 14137-7 kit helps prevent the cooler from sliding and causing damage to itself or the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the corner pieces and straps sold separately?\u003c\/strong\u003e No, the Attwood 14137-7 is sold as a complete kit with all 4 corner pieces and both stretch straps included together.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989666148571,"sku":"ATT-14137-7","price":11.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ATT-14137-7-Cooler-Mount-1__37045.1739477319.500.750.jpg?v=1785188239","url":"https:\/\/www.goodvibesmarina.com\/products\/attwood-14137-7-cooler-mounting-kit-4-corner-brackets-and-2-quick-connect-stretch-straps-for-boat-coolers","provider":"Good Vibes Marina","version":"1.0","type":"link"}