{"product_id":"attwood-5612-7-tsunami-mk2-t1200-manual-bilge-pump-12v-1200-gph-direct-replacement-for-4612-7-with-straight-90-degree-elbow-fittings","title":"Attwood Tsunami Mk2 T1200 12V Manual Bilge Pump, 1200 GPH, Direct Replacement for Attwood 4612-7","description":"\u003cp\u003eThe Attwood Tsunami Mk2 T1200 is a 12-volt manual bilge pump rated at 1200 GPH, built for efficient, reliable water removal aboard small to mid-size boats. It uses a patented X-Air Impeller design to clear trapped air pockets that would otherwise cause a standard impeller to lose prime, keeping the pump moving water even when air gets drawn into the intake alongside bilge water.\u003c\/p\u003e\u003cp\u003eThe pump ships with both a 360 degree rotatable elbow outlet and a straight outlet, so it can be installed in tight or awkward bilge compartments without forcing the discharge hose into an unworkable angle. A one-hand cartridge release lets the impeller cartridge be pulled and serviced quickly, without tools, which matters when the pump is mounted in a cramped bilge space and needs a fast field cleaning or impeller swap. The housing and impeller are made of durable plastic, and the unit is designed for freshwater use.\u003c\/p\u003e\u003cp\u003eThis unit is a direct replacement for the earlier Attwood 4612-7 12V T1200 pump, so boat owners upgrading or replacing a worn unit can install the 5612-7 in the same mounting location without changing the plumbing configuration. The pump includes the mounting washer and a non-return valve (NRV) to prevent backflow through the discharge line once the pump shuts off.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5612-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Style:\u003c\/strong\u003e T1200 - 12V, 1200 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 20 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 14 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4 inches L x 6.6 inches W x 4.4 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Design:\u003c\/strong\u003e 360 degree rotatable elbow outlet, with straight outlet included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Unit, Instructions, Washer, NRV (Non-Return Valve), 90 Degree Outlet, Straight Outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697024152\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis is a manual 12-volt bilge pump intended for general marine bilge installation; no make\/model\/year fitment is specified beyond its use as a direct replacement for the Attwood 4612-7 12V T1200 pump.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAttwood 4612-7\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Attwood 5612-7 bilge pump rated for?\u003c\/strong\u003e The Attwood 5612-7 Tsunami Mk2 is a 12-volt manual bilge pump rated at 1200 GPH (T1200), with a maximum flow rate of 20 gallons per minute and a maximum lifting height of 14 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 5612-7 a direct replacement for another Attwood pump?\u003c\/strong\u003e Yes, the 5612-7 is a direct replacement for the Attwood 4612-7 12V T1200 pump, so it installs in the same location without changing existing plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the pump come with the fittings needed to install it?\u003c\/strong\u003e Yes, the 5612-7 ships with both a 90 degree elbow outlet and a straight outlet, along with the mounting washer and a non-return valve (NRV), so both outlet configurations are covered out of the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this bilge pump?\u003c\/strong\u003e The Attwood Tsunami Mk2 T1200 (5612-7) measures 4 inches long by 6.6 inches wide by 4.4 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5612-7 weigh?\u003c\/strong\u003e The Attwood 5612-7 bilge pump weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this pump run on?\u003c\/strong\u003e This is a 12-volt DC bilge pump, drawing power from a standard 12V marine electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the X-Air Impeller feature on this pump?\u003c\/strong\u003e The X-Air Impeller is a patented impeller design in the Attwood Tsunami Mk2 T1200 that clears trapped air pockets so the pump keeps moving water instead of losing prime when air enters the intake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the outlet be rotated after installation?\u003c\/strong\u003e Yes, the elbow outlet on the 5612-7 rotates a full 360 degrees, allowing the discharge hose to be aimed in whatever direction fits the mounting location; a straight outlet is also included as an alternative.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump serviceable in a tight bilge space?\u003c\/strong\u003e The Attwood 5612-7 features a one-hand cartridge release, letting the impeller cartridge be removed for cleaning or replacement quickly without tools, even in a cramped bilge compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump housing made of?\u003c\/strong\u003e The Attwood Tsunami Mk2 T1200 (5612-7) is constructed of durable plastic in a white and gray color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 5612-7?\u003c\/strong\u003e The package includes the pump unit, instructions, a mounting washer, a non-return valve (NRV), a 90 degree outlet, and a straight outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 5612-7 genuine Attwood equipment?\u003c\/strong\u003e Yes, the 5612-7 is a genuine Attwood part, manufactured by Attwood under the Tsunami Mk2 T1200 product line.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671850203,"sku":"ATT-5612-7","price":69.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61TMOeb8TKL.jpg?v=1784486943","url":"https:\/\/www.goodvibesmarina.com\/products\/attwood-5612-7-tsunami-mk2-t1200-manual-bilge-pump-12v-1200-gph-direct-replacement-for-4612-7-with-straight-90-degree-elbow-fittings","provider":"Good Vibes Marina","version":"1.0","type":"link"}