{"product_id":"attwood-9067-1-powerguard-27-vented-marine-battery-box-fits-group-27-batteries-black-with-40-inch-hold-down-strap","title":"Attwood 9067-1 Power Guard 27 Vented Battery Box for Group 27 Batteries, Black","description":"\u003cp\u003eThe Attwood 9067-1 Power Guard 27 Battery Box is a vented, black polypropylene enclosure built to hold and protect a single Group 27 (Series 27) marine battery up to 10.5 inches in height. It is designed as a hold-down system that keeps a battery secured and ventilated while guarding against water intrusion and physical damage in an onboard battery compartment. The vented cover lets hazardous battery gases escape safely, while four cable openings, enlarged to.55 inch diameter, make routing battery cables straightforward without loosening the seal around the lid. Larger handles with rolled edges make the box easier to carry and position during installation, and reference instructions are molded directly into the inside of the cover for quick setup guidance without a separate manual. The box is constructed of acid-resistant polypropylene rated for impact performance from -20 F to +120 F, holding up to sun, cold, and the corrosive effects of battery acid in a marine environment. A 40 inch hold-down strap and mounting hardware are included, with the strap rated to resist 350 pounds of force, well above the U.S. Coast Guard minimum. The complete assembly meets ABYC Standard E-10 and USCG Specification 183.420 for battery hold-down systems. It suits fishing boats, pontoons, and other vessels running a single Group 27 battery and needing a compliant, corrosion-resistant box rather than an open tray or strap-only mount.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9067-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Compatibility:\u003c\/strong\u003e Group\/Series 27 batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Battery Height:\u003c\/strong\u003e 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Dimensions:\u003c\/strong\u003e 16.88 inches D x 9.63 inches W x 10.88 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior Dimensions:\u003c\/strong\u003e 13.06 x 6.9 x 10.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Openings:\u003c\/strong\u003e Four,.55 inch diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-Down Strap:\u003c\/strong\u003e 40 inch strap, rated to 350 pounds of force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e ABYC E-10, USCG Specification 183.420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -20 F to +120 F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697906717\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Power Guard 27 vented battery box, 40 inch mounting strap and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eGroup\/Series 27 marine batteries up to 10.5 inches in height\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size battery fits the Attwood 9067-1 battery box?\u003c\/strong\u003e The 9067-1 is sized for a Group 27 (Series 27) marine battery with a maximum height of 10.5 inches; the interior measures 13.06 x 6.9 x 10.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a mounting strap included with this battery box?\u003c\/strong\u003e Yes, the 9067-1 ships with a 40 inch hold-down strap and mounting hardware, with the strap rated to resist 350 pounds of force.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 9067-1 battery box made of?\u003c\/strong\u003e It is made of acid-resistant polypropylene, impact-tested from -20 F to +120 F for durability in marine and outdoor conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this battery box meet USCG and ABYC requirements?\u003c\/strong\u003e Yes, the Attwood 9067-1 complies with ABYC Standard E-10 and USCG Specification 183.420 for battery hold-down systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 9067-1 battery box weigh?\u003c\/strong\u003e The Power Guard 27 battery box weighs 2.4 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the box vented or fully sealed?\u003c\/strong\u003e The 9067-1 is a vented design, allowing hazardous battery gases to escape while the cover minimizes water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many cable openings does the box have and how big are they?\u003c\/strong\u003e The Attwood 9067-1 has four cable openings, enlarged to.55 inch diameter, for routing battery cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Power Guard 27 battery box?\u003c\/strong\u003e It is molded in black polypropylene.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre installation instructions included?\u003c\/strong\u003e Reference instructions for the 9067-1 are molded directly into the inside of the cover, so they stay with the box rather than a separate paper insert.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the exterior dimensions of the 9067-1 battery box?\u003c\/strong\u003e The exterior of the box measures 16.88 inches D x 9.63 inches W x 10.88 inches H.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this box fit a taller battery than 10.5 inches?\u003c\/strong\u003e No, the 9067-1 is rated for batteries up to 10.5 inches maximum height; a taller battery will not close under the vented cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the battery box include handles for carrying?\u003c\/strong\u003e Yes, the Attwood 9067-1 has larger handles with rolled edges to make handling and installation easier.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675421915,"sku":"ATT-9067-1","price":14.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71CW-V8ENzL.jpg?v=1784487125","url":"https:\/\/www.goodvibesmarina.com\/products\/attwood-9067-1-powerguard-27-vented-marine-battery-box-fits-group-27-batteries-black-with-40-inch-hold-down-strap","provider":"Good Vibes Marina","version":"1.0","type":"link"}