{"product_id":"attwood-9082-1-small-battery-box-with-strap-u1-series-16-vented-marine-battery-box-uscg-183-420","title":"Attwood 9082-1 Small Battery Box with Mounting Strap, Fits U1 and Series 16 Batteries, Black Vented","description":"\u003cp\u003eThe Attwood 9082-1 is a small vented battery box built to hold and protect Series 16 and U1 batteries, the size commonly used in jet skis, power lawn equipment, and garden equipment. The box is molded from polypropylene, a material that offers total resistance to battery acid, so the housing will not degrade from exposure to electrolyte spills or splashes. It is drop tested across a temperature range of -20 degrees F to +120 degrees F, confirming it holds up structurally in both cold winter storage and hot engine-bay or dock-box conditions.\u003c\/p\u003e\u003cp\u003eBattery retention is handled by an included hold-down strap that resists 350 pounds of force, nearly four times the USCG requirement for battery hold-down systems, keeping the battery locked in place under vibration and rough handling. The box meets USCG 183.420 regulations for OEM-installed battery hold-down systems. All mounting hardware is included in the box, and the vented cover design allows hazardous battery gases to escape while helping to minimize water intrusion into the battery compartment. Interior dimensions measure 8.25 x 5.5 x 7.875 inches to accommodate Series 16 and U1 battery footprints, and the complete box measures 7.5 inches deep x 11 inches wide x 8.5 inches high. This is a universal-fit accessory suited to boats, jet skis, and power lawn and garden equipment rather than a specific engine or model application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 9082-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Battery Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Size Compatibility:\u003c\/strong\u003e Series 16 and U1 batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation:\u003c\/strong\u003e Vented\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-Down Strap Length:\u003c\/strong\u003e 40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-Down Strap Rating:\u003c\/strong\u003e 350 pounds of force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -20 degrees F to 120 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior Dimensions:\u003c\/strong\u003e 8.25 x 5.5 x 7.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7.5 inches D x 11 inches W x 8.5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3546 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e USCG 183.420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Battery box, 40 inch mounting strap, mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697908216\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal fit for Series 16 and U1 batteries used in boats, jet skis, and power lawn and garden equipment. No specific engine, make, or model application is specified.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers apply to this battery box.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size batteries does the Attwood 9082-1 battery box fit?\u003c\/strong\u003e The Attwood 9082-1 is sized for Series 16 and U1 batteries, the common sizes used in jet skis and power lawn and garden equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 9082-1 battery box vented or sealed?\u003c\/strong\u003e It is a vented design, allowing hazardous battery gases to escape while the cover helps minimize water intrusion into the compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 9082-1 battery box made of?\u003c\/strong\u003e Polypropylene, chosen for total resistance to battery acid so the housing will not break down from electrolyte exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much force can the hold-down strap on the 9082-1 withstand?\u003c\/strong\u003e 350 pounds of force, nearly four times the USCG requirement for battery hold-down systems on the Attwood 9082-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Attwood 9082-1 come with mounting hardware?\u003c\/strong\u003e Yes, mounting hardware and a 40 inch hold-down strap are included with the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the interior dimensions of the 9082-1 battery box?\u003c\/strong\u003e 8.25 x 5.5 x 7.875 inches on the inside, sized to hold Series 16 and U1 batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall exterior dimensions of the 9082-1 battery box?\u003c\/strong\u003e 7.5 inches deep by 11 inches wide by 8.5 inches high for the complete Attwood 9082-1 unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Attwood 9082-1 compliant with Coast Guard regulations?\u003c\/strong\u003e Yes, it meets USCG 183.420 regulations for OEM-installed battery hold-down systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature range can the 9082-1 battery box handle?\u003c\/strong\u003e It is drop tested from -20 degrees F to +120 degrees F, so the Attwood 9082-1 holds up in both cold storage and hot operating environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Attwood 9082-1 fit a boat, a jet ski, or lawn equipment?\u003c\/strong\u003e All three: the 9082-1 is a universal-fit battery box suited to boats, jet skis, and power lawn and garden equipment using Series 16 or U1 batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood 9082-1 battery box weigh?\u003c\/strong\u003e 1.3546 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 9082-1 battery box?\u003c\/strong\u003e Black, with a matching vented cover.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989675487451,"sku":"ATT-9082-1","price":10.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/att-9082-1_large__85638.1722497100.500.750.jpg?v=1785189059","url":"https:\/\/www.goodvibesmarina.com\/products\/attwood-9082-1-small-battery-box-with-strap-u1-series-16-vented-marine-battery-box-uscg-183-420","provider":"Good Vibes Marina","version":"1.0","type":"link"}