{"product_id":"attwood-tsunami-mk2-t800-bilge-pump-12v-800-gph-direct-replacement-for-4608-7-threaded-manual-cartridge-pump-with-elbow-straight-fittings","title":"Attwood Tsunami Mk2 T800 12V Bilge Pump, 800 GPH, Replaces 4608-7","description":"\u003cp\u003eThe Attwood Tsunami Mk2 T800 is a 12 volt DC bilge pump rated for 800 gallons per hour, built for reliable water removal in boats operating in freshwater conditions. It uses a patented X-Air Impeller that clears trapped air pockets so the pump keeps moving water instead of losing prime, a common failure point in lesser bilge pumps. The pump is designed for quick installation and easy service, with a one-hand cartridge release that lets you pull the impeller cartridge for cleaning or replacement without tools or awkward reach into tight bilge compartments. The outlet is a 360 degree rotatable elbow design, so the discharge can be aimed in any direction to match your hose routing, and the pump ships with both a 90 degree elbow outlet and a straight outlet fitting to fit different mounting layouts. Construction is durable plastic in a white and blue housing, sized to fit compactly into standard bilge mounting locations. In the box you get the pump unit, mounting instructions, a washer, a non-return valve (NRV) to prevent backflow when the pump shuts off, the 90 degree outlet, and the straight outlet. This is a direct replacement for the Attwood 4608-7 12V T800 pump, so it drops into the same mounting footprint and plumbing as that earlier part number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Attwood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5608-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e T800 - 12V, 800 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Capacity:\u003c\/strong\u003e 800 Gallons Per Hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 13.33 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Lifting Height:\u003c\/strong\u003e 12 Feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts (DC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4.3 inches L x 6.6 inches W x 4.3 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\/Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 022697023988\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Unit, Instructions, Washer, NRV (Non Return Valve), 90 Degree Outlet, Straight Outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits any boat bilge application sized for a 12 volt, 800 GPH pump; a direct replacement for the Attwood 4608-7 12V T800 pump.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e4608-7\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Attwood Tsunami Mk2 T800 bilge pump?\u003c\/strong\u003e The Attwood Tsunami Mk2 T800 (part number 5608-7) is rated at 800 gallons per hour, which works out to 13.33 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this pump replace the Attwood 4608-7?\u003c\/strong\u003e Yes, the Attwood 5608-7 is a direct replacement for the Attwood 4608-7 12V T800 pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this bilge pump run on?\u003c\/strong\u003e This is a 12 volt DC bilge pump, part number 5608-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow high can the Tsunami Mk2 T800 lift water?\u003c\/strong\u003e The maximum lifting height for the Attwood Tsunami Mk2 T800 (5608-7) is 12 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Attwood 5608-7 bilge pump?\u003c\/strong\u003e The pump measures 4.3 inches long by 6.6 inches wide by 4.3 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Attwood Tsunami Mk2 T800 weigh?\u003c\/strong\u003e This bilge pump weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the 5608-7 pump?\u003c\/strong\u003e The Attwood 5608-7 ships with the pump unit, installation instructions, a washer, a non-return valve (NRV), a 90 degree outlet elbow, and a straight outlet fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the pump housing made from?\u003c\/strong\u003e The Attwood Tsunami Mk2 T800 housing is made of durable plastic, finished in white and blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the outlet be rotated to fit my hose routing?\u003c\/strong\u003e Yes, the 5608-7 uses a 360 degree rotatable elbow outlet, and both a 90 degree elbow and a straight outlet fitting are included so you can match your existing hose routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I service the impeller cartridge on this pump?\u003c\/strong\u003e The Attwood Tsunami Mk2 T800 has a one-hand cartridge release, allowing the impeller cartridge to be pulled for cleaning or replacement without tools, even in tight bilge spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Tsunami Mk2 T800 handle trapped air in the line?\u003c\/strong\u003e Yes, part number 5608-7 uses a patented X-Air Impeller designed to clear air-lock so the pump keeps priming and moving water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat water conditions is this bilge pump built for?\u003c\/strong\u003e The Attwood Tsunami Mk2 T800 is built and rated for freshwater bilge pumping applications.\u003c\/p\u003e","brand":"Attwood","offers":[{"title":"Default Title","offer_id":48989671653595,"sku":"ATT-5608-7","price":52.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Attwood_Tsunami_Mk2_800GPH_Bilge_Pump_with_Included_Parts__01662.1722376174.500.750.jpg?v=1785188836","url":"https:\/\/www.goodvibesmarina.com\/products\/attwood-tsunami-mk2-t800-bilge-pump-12v-800-gph-direct-replacement-for-4608-7-threaded-manual-cartridge-pump-with-elbow-straight-fittings","provider":"Good Vibes Marina","version":"1.0","type":"link"}