{"product_id":"bennett-a-1115-actuator-lower-hinge-pin-for-trim-tab-actuators","title":"Bennett A-1115 Actuator Lower Hinge Pin for Trim Tab Actuators","description":"\u003cp\u003eThe Bennett A-1115 Actuator Lower Hinge Pin is a replacement lower hinge pin for Bennett trim tab actuators. Bennett actuators are built as strong but flexible nylon\/fiberglass hydraulic cylinders, and their piston-like arms push the trim tabs into position as hydraulic pressure is applied. A key design feature of the Bennett actuator is that fluid flows through a concealed hole in the upper hinge at the top of the actuator, which eliminates the need for external hoses that would otherwise be subject to damage. The lower hinge pin is the pivot point at the base of the actuator assembly, allowing the actuator to move as the trim tab is raised and lowered.\u003c\/p\u003e\u003cp\u003eBennett offers its actuators in a few configurations to suit different installation needs: the A1101A is the standard actuator, the A1101EX is built with an external line connection for situations where the interior of the transom is totally inaccessible, and the A1200S is designed for installations where space is limited. The A-1115 lower hinge pin is a maintenance and repair part for keeping an existing Bennett actuator in working order without replacing the entire assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e A-1115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Actuator Lower Hinge Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285315804\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBennett trim tab actuators\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNot specified\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Bennett A-1115 Actuator Lower Hinge Pin used for?\u003c\/strong\u003e The Bennett A-1115 is a lower hinge pin used to service and repair Bennett trim tab actuators, providing the pivot point at the base of the actuator assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the A-1115 a complete actuator or a repair part?\u003c\/strong\u003e It is a repair part, not a complete actuator. The Bennett A-1115 replaces just the lower hinge pin on an existing Bennett actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do Bennett actuators route fluid through the upper hinge instead of external hoses?\u003c\/strong\u003e Bennett actuators are designed with a concealed fluid passage through the upper hinge at the top of the actuator, which eliminates external hoses that would otherwise be exposed to damage. The A-1115 lower hinge pin services the opposite end of this same actuator design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat materials are Bennett actuators made from?\u003c\/strong\u003e Bennett actuators, which the A-1115 lower hinge pin services, are built as strong but flexible nylon\/fiberglass hydraulic cylinders with piston-like arms that push the trim tabs into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the A1101A, A1101EX, and A1200S Bennett actuators?\u003c\/strong\u003e The A1101A is Bennett's standard actuator, the A1101EX uses an external line connection for cases where the inside of the transom is totally inaccessible, and the A1200S is designed for installations where space is limited. The A-1115 lower hinge pin is a service part for the Bennett actuator line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett A-1115 Actuator Lower Hinge Pin weigh?\u003c\/strong\u003e The Bennett A-1115 Actuator Lower Hinge Pin weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes replacing the lower hinge pin require removing the whole actuator?\u003c\/strong\u003e The A-1115 is intended to service the lower hinge of an existing Bennett actuator; review your current trim tab actuator setup and replacement needs before ordering to confirm the correct repair approach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the product UPC for the Bennett A-1115 hinge pin?\u003c\/strong\u003e The Bennett A-1115 Actuator Lower Hinge Pin carries UPC 666285315804.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the A-1115 fit any Bennett actuator model?\u003c\/strong\u003e The A-1115 is designed as a lower hinge pin for Bennett trim tab actuators; check your existing actuator model, such as the A1101A, A1101EX, or A1200S, before ordering to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat function does the lower hinge pin serve on a Bennett actuator?\u003c\/strong\u003e The lower hinge pin, such as the Bennett A-1115, forms the pivot connection at the base of the actuator, allowing the piston-like arm to move as it pushes the trim tab into position.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450241243,"sku":"BEN-A1115","price":1.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/A1115__02077.1737829815.500.750.jpg?v=1785163391","url":"https:\/\/www.goodvibesmarina.com\/products\/bennett-a-1115-actuator-lower-hinge-pin-for-trim-tab-actuators","provider":"Good Vibes Marina","version":"1.0","type":"link"}