{"product_id":"bennett-auto-trim-tab-retractor-6bt500096600-for-hydraulic-trim-tab-systems","title":"Bennett Auto Trim Tab Retractor 6BT500096600 for Hydraulic Trim Tab Systems","description":"\u003cp\u003eThe Bennett Auto Trim Tab Retractor (6BT500096600) is an add-on accessory for hydraulic trim tab systems that automatically retracts the trim tabs to the full up position whenever the boat's ignition is switched off. Wired between the trim tab control and the engine ignition switch, it relieves hydraulic pressure on the actuating cylinders when the tabs are not in use and helps prevent trim tab damage while the boat is trailered or stored in a dry rack. It also helps protect the actuating cylinder from unnecessary marine growth by keeping it retracted between outings. For boats that are not equipped with trim tab position indicators, the retractor gives an added layer of assurance that the tabs are fully up every time the boat is started, reducing the risk of the tabs catching on a trailer, fork lift, or storage rack. Installation is straightforward: the unit mounts easily under the instrument panel and connects directly to the existing trim tab control and engine ignition switch, without requiring a separate control panel or major rewiring. It operates on a 12 volt system and is housed in a black plastic enclosure sized for a compact under-panel mount. This retractor is intended as a complement to an existing hydraulic trim tab system rather than a replacement for the primary trim tab control.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500096600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e AR512\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Retractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Systems:\u003c\/strong\u003e Hydraulic Trim Tab Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 6 x 7 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Under Instrument Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285220009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThe Bennett Auto Trim Tab Retractor 6BT500096600 is an add-on for hydraulic trim tab systems and is designed to work with Bennett hydraulic trim tab controls.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Bennett Auto Trim Tab Retractor do?\u003c\/strong\u003e It automatically retracts the trim tabs to the full up position whenever the boat's ignition is switched off, so the Bennett Auto Trim Tab Retractor 6BT500096600 helps ensure tabs are not left extended during trailering or storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a standalone trim tab system?\u003c\/strong\u003e No, the 6BT500096600 retractor is an add-on for existing hydraulic trim tab systems, not a complete trim tab kit, and it connects to a trim tab control and engine ignition switch already in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the retractor get installed?\u003c\/strong\u003e It is installed under the instrument panel, where it connects to the trim tab control and the engine ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the Bennett Auto Trim Tab Retractor use?\u003c\/strong\u003e It operates on a 12 volt system, matching standard boat electrical setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this help boats without trim tab position indicators?\u003c\/strong\u003e Yes, boats without trim tab indicators benefit from the 6BT500096600 because it ensures the trim tabs are fully retracted every time the boat is started, even without a visual indicator confirming tab position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would trailered boats need an auto trim tab retractor?\u003c\/strong\u003e Trailered or dry-stored boats risk trim tab damage from fork lifts, trailer components, and storage racks if the tabs are left extended; the Bennett Auto Trim Tab Retractor reduces that risk by retracting the tabs automatically at shutdown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the retractor reduce hydraulic pressure when the tabs are idle?\u003c\/strong\u003e Yes, the Bennett Auto Trim Tab Retractor relieves hydraulic pressure on the actuating cylinder when the trim tabs are not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material and color is the housing?\u003c\/strong\u003e The unit is housed in black plastic, sized at approximately 6 x 7 x 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this retractor help prevent marine growth issues?\u003c\/strong\u003e Keeping the trim tabs retracted between outings, as the 6BT500096600 does automatically, helps avoid unnecessary marine growth on the actuating cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Bennett Auto Trim Tab Retractor?\u003c\/strong\u003e The 6BT500096600 is the retractor unit itself, designed to wire into an existing hydraulic trim tab control and engine ignition switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a warranty included with this part?\u003c\/strong\u003e Yes, the Bennett Auto Trim Tab Retractor 6BT500096600 comes with a limited warranty.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450339547,"sku":"BEN-AR512","price":87.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ben-ar512_lg__97041.1725456960.500.750.jpg?v=1785163391","url":"https:\/\/www.goodvibesmarina.com\/products\/bennett-auto-trim-tab-retractor-6bt500096600-for-hydraulic-trim-tab-systems","provider":"Good Vibes Marina","version":"1.0","type":"link"}