{"product_id":"bennett-bolt-electric-trim-tab-kit-6bt500134300-12-in-x-4-in-fits-trailered-boats-12-17-ft","title":"Bennett BOLT Electric Trim Tab Kit 6BT500134300 - 12 in x 4 in, Fits Trailered Boats 12-17 ft","description":"\u003cp\u003eThe Bennett 6BT500134300 BOLT Electric Trim Tab Kit is a 12 inch by 4 inch edge-style electric trim tab system built for trailered boats from 12 to 17 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. Bennett sizes trim tabs in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement, so this kit measures 12 inches wide by 4 inches deep. The BOLT system is intended for single actuator use, since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003eEach kit routes its wiring through the upper hinge, so no wiring is exposed to the marine environment, adding protection against corrosion and damage. The actuator housing is a water-tight black nylon design, and the main seal is positioned high on the actuator to guard against marine growth and water intrusion, two of the most common failure points on older trim tab systems. Bennett backs the electric actuators with a lifetime warranty. Installation is designed to be fast, since the actuator does not need to be disassembled during mounting.\u003c\/p\u003e\u003cp\u003eThe kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors. A trim tab control switch is not included and must be purchased separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500134300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Cross-Reference Part Number:\u003c\/strong\u003e 6BT-50013-43-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (Span):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth (Chord):\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Water-tight black nylon actuator housing; stainless steel trim planes and mounting plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators Included:\u003c\/strong\u003e 2 BEA2000 12-volt trim tab actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet, plus 6 feet wire harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 12 to 17 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Use:\u003c\/strong\u003e Single actuator use only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty on electric actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrailered boats 12 to 17 feet\u003c\/li\u003e\n\u003cli\u003eFlatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYamaha Part Number 6BT-50013-43-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boats is the Bennett BOLT124 trim tab kit designed for?\u003c\/strong\u003e This 12 inch by 4 inch BOLT kit (part 6BT500134300) is recommended for trailered boats from 12 to 17 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 12 x 4 trim tab size measured?\u003c\/strong\u003e Bennett lists trim tab sizes as span by chord, so 12 x 4 means a 12 inch side-to-side span and a 4 inch fore-to-aft chord for this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bennett 6BT500134300 kit include a control switch?\u003c\/strong\u003e No, the switch is sold separately from this trim tab kit; the kit itself includes only the actuators, trim planes, mounting plates, and wiring harnesses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit contains two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two of these actuators be run on the same trim tab?\u003c\/strong\u003e No, this BOLT electric trim tab system is intended for single actuator use per tab, since two electric actuators cannot be synchronized on one tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made from?\u003c\/strong\u003e The trim planes and mounting plates included with the 6BT500134300 kit are stainless steel, while the actuator housing is a water-tight black nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit protect against water intrusion?\u003c\/strong\u003e Wiring is routed through the upper hinge so it is never exposed to the marine environment, and the main seal on the actuator is positioned high to help guard against marine growth and water intrusion failures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a Yamaha equivalent part number for this Bennett trim tab kit?\u003c\/strong\u003e Yes, Bennett part 6BT500134300 (BOLT124) corresponds to Yamaha part number 6BT-50013-43-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this trim tab kit?\u003c\/strong\u003e The electric actuators in the Bennett 6BT500134300 kit carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long are the wiring harnesses on this kit?\u003c\/strong\u003e Each actuator comes with a 20 foot harness plus a 6 foot wire harness, both fitted with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs installation difficult for this trim tab system?\u003c\/strong\u003e Installation is designed to be fast because the BOLT actuator does not need to be disassembled during mounting.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450601691,"sku":"BEN-BOLT124","price":577.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT124-12-inch-by-4-inch-BOLT-Electric-Trim-Tab-Kit__63161.1739477218.500.750.jpg?v=1785163393","url":"https:\/\/www.goodvibesmarina.com\/products\/bennett-bolt-electric-trim-tab-kit-6bt500134300-12-in-x-4-in-fits-trailered-boats-12-17-ft","provider":"Good Vibes Marina","version":"1.0","type":"link"}