{"product_id":"bennett-marine-12-x-12-bolt-electric-trim-tab-kit-part-6bt500133800","title":"Bennett Marine 12 x 12 BOLT Electric Trim Tab Kit, Part 6BT500133800","description":"\u003cp\u003eThe Bennett Marine BOLT Electric Trim Tab Kit (part 6BT500133800) is a complete 12 inch by 12 inch trim tab system built to improve ride quality, handling, and performance on trailered boats from 17 to 30 feet. Bennett Marine has manufactured electric trim tabs since 1960 and this BOLT series uses an updated actuator design that addresses the water intrusion and part failures common to older trim tab technology.\u003c\/p\u003e\u003cp\u003eThe kit centers on a water-tight black nylon actuator with wiring routed through the upper hinge, so no wires are ever exposed to the marine environment. The main seal is positioned high on the actuator to further guard against marine growth and water intrusion failures, and the system runs quieter than older-technology competitors. Installation is fast because the actuator arrives fully assembled and does not need to be taken apart before mounting.\u003c\/p\u003e\u003cp\u003eThis kit is best suited to flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is intended for single actuator use per side. Trim tab size is listed in span x chord format: span is the side-to-side measurement and chord is the fore-to-aft measurement, giving this set its 12 inch by 12 inch dimensions. A control switch is required to operate the system and is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500133800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes and mounting plates; black nylon actuator housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 17 to 30 feet, trailered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct UPC:\u003c\/strong\u003e 666285600047\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e (2) BEA2000 12-volt trim tab actuators, (2) stainless steel trim planes and mounting plates, (2) 20 ft harnesses with waterproof connectors, 6 ft wire harnesses with waterproof connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty for electric actuators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts; recommended for trailered boats 17 to 30 feet using a single actuator per side.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett Marine 6BT500133800 kit?\u003c\/strong\u003e The trim tabs in this kit measure 12 inches wide by 12 inches deep. Bennett Marine trim tab sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit designed for?\u003c\/strong\u003e This kit is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is recommended for trailered boats from 17 to 30 feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this trim tab kit?\u003c\/strong\u003e No. The switch that operates the trim tabs is sold separately from this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with part 6BT500133800?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 ft harnesses with waterproof connectors, and 6 ft wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the wiring protected from water intrusion?\u003c\/strong\u003e Wiring is threaded through the upper hinge of the actuator so no wires are exposed to the marine environment, and the main seal is positioned high on the actuator to guard against marine growth and water intrusion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this trim tab system use?\u003c\/strong\u003e The Bennett Marine BOLT actuators in this kit operate on 12 Volts DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be run with two actuators synchronized on one tab?\u003c\/strong\u003e No. This electric trim tab system is intended for single actuator use per tab, since two electric actuators cannot be synchronized on the same tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes and mounting plates included with this kit are stainless steel, while the actuator housing is water-tight black nylon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow difficult is installation for this trim tab kit?\u003c\/strong\u003e Installation is designed to be fast because the actuator arrives fully assembled and does not need to be disassembled before mounting to the transom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this Bennett Marine trim tab kit?\u003c\/strong\u003e The electric actuators in this kit carry a lifetime manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit run quieter than other trim tab systems?\u003c\/strong\u003e Yes. The BOLT actuator design is built to run quieter than older-technology electric trim tab systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the part number 6BT500133800 refer to?\u003c\/strong\u003e 6BT500133800 is the part number for this complete 12 inch by 12 inch Bennett Marine BOLT electric trim tab kit, sold without a control switch.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450503387,"sku":"BEN-BOLT1212","price":682.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT1212-12-inch-by-12-inch-BOLT-Electric-Trim-Tab-Kit__94533.1739460326.500.750.jpg?v=1785163393","url":"https:\/\/www.goodvibesmarina.com\/products\/bennett-marine-12-x-12-bolt-electric-trim-tab-kit-part-6bt500133800","provider":"Good Vibes Marina","version":"1.0","type":"link"}