{"product_id":"bennett-marine-bolt-24-x-9-electric-trim-tab-kit-mpn-6bt500135200-trailered-boats-22-27-ft","title":"Bennett Marine BOLT 24 x 9 Electric Trim Tab Kit, MPN 6BT500135200 - Trailered Boats 22-27 ft","description":"\u003cp\u003eThis Bennett Marine BOLT electric trim tab kit (MPN 6BT500135200) is a 24 inch by 9 inch trim tab set built for trailered boats from 22 to 27 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. The system is designed for single actuator use per side. Trim tab sizing follows the span x chord convention, where span is the side-to-side measurement (24 inches) and chord is the fore-to-aft measurement (9 inches).\u003c\/p\u003e\u003cp\u003eThe BOLT system routes wiring through the upper hinge so no wires are exposed to the marine environment, and uses a water-tight black nylon actuator for trouble-free operation. The main seal is positioned high on the actuator to protect against marine growth and water intrusion failures, addressing the common failure points of older electric trim tab designs. Installation is fast because the actuator does not need to be disassembled during the process.\u003c\/p\u003e\u003cp\u003eIncluded in the kit are two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors. A control switch is not included and must be purchased separately. The electric actuators carry a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500135200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e BOLT Electric Trim Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Width (Span):\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Depth (Chord):\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Electric Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Voltage:\u003c\/strong\u003e 12 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Model:\u003c\/strong\u003e BEA2000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim planes and mounting plates; nylon actuator housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 22 to 27 feet (trailered)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Types:\u003c\/strong\u003e Flatboats, center console, dual console, deck boats, bowriders, bass boats, runabouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 20 feet and 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666285600030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Reference (Yamaha Part Number):\u003c\/strong\u003e 6BT-50013-52-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty (electric actuators)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eSuitable for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. Best suited for single actuator use and for trailered boats 22 to 27 feet.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e6BT-50013-52-00\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tabs in the Bennett BOLT kit with MPN 6BT500135200?\u003c\/strong\u003e The trim tabs measure 24 inches wide by 9 inches deep. Bennett sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this Bennett trim tab kit designed for?\u003c\/strong\u003e This 24 x 9 BOLT electric trim tab kit is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is best suited for trailered boats 22 to 27 feet using a single actuator per side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a control switch included with this kit?\u003c\/strong\u003e No. The Bennett BOLT 24 x 9 trim tab kit (MPN 6BT500135200) is sold without a switch, which must be purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this trim tab kit?\u003c\/strong\u003e The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this Bennett trim tab kit cross-reference to a Yamaha part number?\u003c\/strong\u003e Yes, this kit corresponds to Yamaha part number 6BT-50013-52-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the BOLT system compare to older electric trim tab designs?\u003c\/strong\u003e Compared to older electric trim tab technology, the Bennett BOLT system reduces water intrusion and the part malfunctions common to outdated designs, while running quieter than competing systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies to the actuators in this kit?\u003c\/strong\u003e The BEA2000 electric actuators included with this Bennett BOLT 24 x 9 kit carry a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the trim planes made of?\u003c\/strong\u003e The trim planes and mounting plates in this kit are stainless steel, paired with a water-tight black nylon actuator housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bennett BOLT 24 x 9 trim tab kit weigh?\u003c\/strong\u003e This trim tab kit (MPN 6BT500135200) weighs 27 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this trim tab kit difficult to install?\u003c\/strong\u003e Installation is fast because the actuator does not need to be disassembled during the process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two actuators be synced together with this kit?\u003c\/strong\u003e No. The Bennett BOLT 24 x 9 kit is best suited for single actuator use per side rather than synchronized dual-actuator setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat protects this trim tab actuator from water intrusion?\u003c\/strong\u003e The actuator is water-tight black nylon with a high-mounted main seal, and its wiring is routed through the upper hinge so no wires are exposed to the marine environment.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027450863835,"sku":"BEN-BOLT249","price":730.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-BOLT249-24-inch-by-9-inch-BOLT-Electric-Trim-Tab-Kit__83682.1739477218.500.750.jpg?v=1785163394","url":"https:\/\/www.goodvibesmarina.com\/products\/bennett-marine-bolt-24-x-9-electric-trim-tab-kit-mpn-6bt500135200-trailered-boats-22-27-ft","provider":"Good Vibes Marina","version":"1.0","type":"link"}