{"product_id":"bennett-marine-hydraulic-trim-tab-kit-24-x-9-inch-euro-style-control-part-6bt500028900","title":"Bennett Marine Hydraulic Trim Tab Kit, 24 x 9 Inch, Euro-Style Control, Part 6BT500028900","description":"\u003cp\u003eThis Bennett Marine hydraulic trim tab kit gives boaters precise control over running attitude, helping the boat get on plane faster and stay on plane at intermediate speeds. As a boat accelerates, the bow rises and creates hull drag that cuts fuel efficiency; this trim tab kit corrects that lift and also lets the operator compensate for uneven loads from passengers, fuel, or gear. The kit includes two Bennett hydraulic actuators, which are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position. All hydraulic lines and wiring are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments. Control is handled through an ES2000 Euro-Style Rocker Switch, giving the operator direct, responsive command of each tab.\u003c\/p\u003e\u003cp\u003eEach trim tab blade measures 24 inches wide by 9 inches deep and is sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion; this construction method keeps maintenance low and extends service life. The kit is recommended for boats from 26 feet to 40 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers. Everything needed for a full installation is included, from the trim plane assemblies to the hydraulic power unit and tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bennett Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 6BT500028900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Hydraulic Trim Tabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Trim Tab Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Style:\u003c\/strong\u003e Euro-Style Rocker Switch (ES2000)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Width:\u003c\/strong\u003e 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Tab Blade Depth:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 26 feet to 40 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Tubing Length:\u003c\/strong\u003e 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 30 inches L x 15 inches W x 5 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel trim tab blades; nylon\/fiberglass hydraulic actuators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e 2 trim plane assemblies, 2 A1101A hydraulic actuators, 1 hydraulic power unit, 1 ES2000 Euro-Style Rocker Switch, 1 hardware bag, 20 feet of hydraulic tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on trim tabs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size are the trim tab blades in this Bennett kit?\u003c\/strong\u003e The blades in the Bennett Hydraulic Trim Tab Kit (part 6BT500028900) measure 24 inches wide by 9 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include a control switch?\u003c\/strong\u003e Yes, the kit comes with an ES2000 Euro-Style Rocker Switch for direct control of the trim tabs, along with 20 feet of hydraulic tubing to connect it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats is this trim tab kit recommended for?\u003c\/strong\u003e This kit is recommended for boats from 26 feet to 40 feet, including flats boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts and RIBs, and cruisers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this trim tab kit?\u003c\/strong\u003e The kit includes 2 trim plane assemblies, 2 A1101A hydraulic actuators, 1 hydraulic power unit, the ES2000 Euro-Style Rocker Switch, a hardware bag, and 20 feet of hydraulic tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the hydraulic actuators made of?\u003c\/strong\u003e The two hydraulic actuators included with this Bennett trim tab kit are strong, flexible nylon\/fiberglass hydraulic cylinders that push the tab planes into position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the trim tab blades welded together?\u003c\/strong\u003e No, the blades on this Bennett trim tab kit are sheared and bent rather than welded, since welding alters the properties of stainless steel and invites corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the complete trim tab kit weigh?\u003c\/strong\u003e The Bennett Hydraulic Trim Tab Kit (6BT500028900) weighs 28 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hydraulic wiring exposed to water and weather?\u003c\/strong\u003e No, all hydraulic lines and wiring on this kit are routed internally and concealed by the upper hinge, keeping them protected from harsh marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this trim tab kit?\u003c\/strong\u003e The Bennett trim tabs in this kit are backed by a limited lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does this kit differ from Bennett's All-in-One control kit?\u003c\/strong\u003e This 24 x 9 inch kit (6BT500028900) uses an ES2000 Euro-Style Rocker Switch for control, while Bennett's separate 24 x 12 inch kit uses an All-in-One Indicator Control with auto tab retraction when the ignition is powered off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this trim tab kit help with fuel efficiency?\u003c\/strong\u003e Yes, by getting the boat on plane quickly this kit reduces hull drag, which helps improve fuel efficiency and also allows correction of uneven loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete trim tab system or a single replacement part?\u003c\/strong\u003e This is a complete hydraulic trim tab kit, not a single replacement part, and includes both trim plane assemblies and the actuators, power unit, and control switch needed for a full installation.\u003c\/p\u003e","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":49027449946331,"sku":"BEN-249E","price":933.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Bennett-249E-Hydraulic-Trim-Tab-Kit-24-inch-by-9-inch-with-Euro-Style-Controls__58315.1739477217.500.750.jpg?v=1785163386","url":"https:\/\/www.goodvibesmarina.com\/products\/bennett-marine-hydraulic-trim-tab-kit-24-x-9-inch-euro-style-control-part-6bt500028900","provider":"Good Vibes Marina","version":"1.0","type":"link"}