{"product_id":"blue-sea-systems-2302-150a-common-busbar-20-x-8-32-screw-terminals-uncovered","title":"Blue Sea Systems 2302 MaxiBus 250 Amp Common Bus Bar, 20-Terminal 8-32 Screw, Without Cover","description":"\u003cp\u003eThe Blue Sea Systems 2302 is a 250 amp MaxiBus common bus bar built to distribute power or ground connections across a marine 12-volt or 24-volt DC electrical system from a single high-capacity source. It provides 20 individual 8-32 screw terminal positions, allowing multiple circuits to be landed on one common point instead of daisy-chaining wires or stacking ring terminals on a single stud. The bus bar uses insert-molded stainless steel studs set into an insulated base, which keeps the terminals rigid and corrosion-resistant in a marine environment while isolating the conductive path from the mounting surface. This 2302 version is supplied without a cover, so the terminals remain fully exposed for easy wire access and inspection; a covered version (2312) and an alternate uncovered variant (2303) are offered as separate part numbers in the same family if a different configuration is needed. With a centerline length of 13 inches and an overall footprint of 1 inch wide by 12 inches tall, the 2302 is sized to mount in a standard electrical panel, battery compartment, or accessory bay alongside other Blue Sea Systems components. It is a common choice for consolidating grounds, distributing accessory power, or organizing a bus system feeding multiple breakers, fuses, or electronics on a boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 2302\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Family:\u003c\/strong\u003e MaxiBus Common Bus Bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 250 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Terminals:\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Screw Size:\u003c\/strong\u003e 8-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Screw Terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Material:\u003c\/strong\u003e Insert-molded stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover:\u003c\/strong\u003e Without cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 48 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 1 inch W x 12 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.51 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many amps is the Blue Sea Systems 2302 bus bar rated for?\u003c\/strong\u003e The Blue Sea Systems 2302 MaxiBus common bus bar is rated for 250 amps of continuous current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 2302 come with a cover?\u003c\/strong\u003e No. The 2302 is the without-cover version of the MaxiBus common bus bar; a covered version is sold separately as part number 2312.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many terminal positions does the 2302 have?\u003c\/strong\u003e The 2302 has 20 individual 8-32 screw terminal positions for landing circuits on a common connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size screws does the 2302 use for terminal connections?\u003c\/strong\u003e Each of the 20 terminal positions on the Blue Sea Systems 2302 uses an 8-32 screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the studs made of on the 2302 bus bar?\u003c\/strong\u003e The 2302 uses insert-molded stainless steel studs set into an insulated base for corrosion resistance in marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2302, 2303, and 2312?\u003c\/strong\u003e All three are MaxiBus common bus bars in the same family; the 2302 and 2303 are supplied without a cover while the 2312 includes an insulating cover with breakouts for wire access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 2302 rated for?\u003c\/strong\u003e The Blue Sea Systems 2302 bus bar is rated up to 48 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 2302?\u003c\/strong\u003e The 2302 measures 1 inch wide by 12 inches tall overall, with a centerline length of 13 inches between the terminal positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 2302 bus bar weigh?\u003c\/strong\u003e The Blue Sea Systems 2302 weighs 0.51 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a MaxiBus common bus bar used for?\u003c\/strong\u003e It is used to distribute power or consolidate ground connections across multiple circuits from a single feed point, replacing the need to stack multiple ring terminals on one stud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 2302 be mounted in a standard electrical panel?\u003c\/strong\u003e Yes, the 2302's compact 1 inch by 12 inch footprint is sized to fit in a standard marine electrical panel, battery compartment, or accessory bay.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989485465819,"sku":"BSS-2302","price":32.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2302.jpg?v=1784506980","url":"https:\/\/www.goodvibesmarina.com\/products\/blue-sea-systems-2302-150a-common-busbar-20-x-8-32-screw-terminals-uncovered","provider":"Good Vibes Marina","version":"1.0","type":"link"}