{"product_id":"blue-sea-systems-4154-weatherdeck-spdt-toggle-switch-on-off-on-momentary-nickel-plated-brass-marine-switch","title":"Blue Sea Systems 4154 SPDT Toggle Switch, (On)-Off-(On), for WeatherDeck Waterproof Panels","description":"\u003cp\u003eThe Blue Sea Systems 4154 is an SPDT (On)-Off-(On) toggle switch built for panel-mounted circuit control aboard boats and other marine or outdoor equipment. The momentary (On) positions on both sides spring back to center-off when released, making it suited to controls such as generator starters, bilge pumps, horns, wipers, and other engine or accessory functions that call for switching action other than a simple ON-OFF, or where circuit protection is handled by a separate device rather than the switch itself.\u003c\/p\u003e\u003cp\u003eConstruction is nickel-plated brass and phenolic, chosen for non-corrosive performance in the marine environment. The switch terminates in 0.25 inch (6.35 mm) quick connect tab terminals and ships with a mounting adapter sized for a standard 5\/8 inch circuit breaker mounting hole, allowing it to install into an A-Series Toggle Circuit Breaker Mounting Panel. It is manufactured for use in Blue Sea Systems WeatherDeck Waterproof Panels, and when installed together with a WeatherDeck Toggle Switch Boot it carries an IP67 rating for temporary immersion of up to 30 minutes.\u003c\/p\u003e\u003cp\u003eThe 4154 is part of the 4150-4155 WeatherDeck switch group and is made in the United States.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4154\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e SPDT Toggle, (On)-Off-(On)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 25 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 24 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Resistance:\u003c\/strong\u003e 100 Megaohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Size:\u003c\/strong\u003e 0.25 inch (6.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Quick Connect Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Panel Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational Protection Rating:\u003c\/strong\u003e IP67 (temporary immersion, 30 minutes, when used with WeatherDeck Toggle Switch Boot)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel-plated brass and phenolic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 1.25 in H x 4.25 in L x 2.25 in W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eManufactured for use in Blue Sea Systems WeatherDeck Waterproof Panels and compatible with the A-Series Toggle Circuit Breaker Mounting Panel; includes a mounting adapter for a standard 5\/8 inch circuit breaker mounting hole.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the (On)-Off-(On) designation mean on the Blue Sea Systems 4154 switch?\u003c\/strong\u003e It means the 4154 is a momentary switch in both directions: pushing the toggle to either position closes that circuit only while held, and it springs back to the center off position when released.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea Systems 4154 toggle switch waterproof?\u003c\/strong\u003e It carries an IP67 rating for temporary immersion of up to 30 minutes, but only when the 4154 is installed with a WeatherDeck Toggle Switch Boot in a WeatherDeck Waterproof Panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size terminals are on the 4154?\u003c\/strong\u003e The 4154 uses 0.25 inch (6.35 mm) quick connect tab terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat panels is the 4154 designed to fit?\u003c\/strong\u003e This toggle switch is manufactured for use in Blue Sea Systems WeatherDeck Waterproof Panels and is also compatible with the A-Series Toggle Circuit Breaker Mounting Panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4154 include its own circuit protection?\u003c\/strong\u003e No. The 4154 is a switching-action device intended for use where circuit protection is provided elsewhere in the system, such as generator starters, bilge pumps, horns, and wiper circuits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 4154 switch made of?\u003c\/strong\u003e Nickel-plated brass and phenolic, a non-corrosive construction chosen for marine and outdoor durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Blue Sea Systems 4154 weigh?\u003c\/strong\u003e 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 4154 typically used for?\u003c\/strong\u003e Common applications include generator starters, bilge pumps, horns, wipers, and other engine controls that need switching action beyond simple ON-OFF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 4154 come with mounting hardware?\u003c\/strong\u003e Yes, it is supplied with a mounting adapter sized for a standard 5\/8 inch circuit breaker mounting hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 4154 different from a push-button version in the same WeatherDeck switch series?\u003c\/strong\u003e The 4154 uses a toggle actuator, while other switches in the 4150-4155 WeatherDeck group use a push-button actuator; both provide switching action separate from circuit protection, but the toggle style lets you see and set the lever position at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Blue Sea Systems 4154 manufactured?\u003c\/strong\u003e It is made in the United States.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage is the 4154 rated for?\u003c\/strong\u003e The 4154 is rated for 24 Volts DC operation with a 25 Amp current rating.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989495623899,"sku":"BSS-4154","price":13.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4154.jpg?v=1784507026","url":"https:\/\/www.goodvibesmarina.com\/products\/blue-sea-systems-4154-weatherdeck-spdt-toggle-switch-on-off-on-momentary-nickel-plated-brass-marine-switch","provider":"Good Vibes Marina","version":"1.0","type":"link"}