{"product_id":"blue-sea-systems-4320-water-resistant-4-position-circuit-breaker-switch-panel-gray-12v-24v-dc-ip66","title":"Blue Sea Systems 4320 Contura Water-Resistant Circuit Breaker Switch Panel, 4 Position, Gray","description":"\u003cp\u003eThe Blue Sea Systems 4320 is a 4-position Contura water-resistant circuit breaker switch panel built to give consolidated control and circuit protection for up to four DC-powered accessories, including bilge pumps, on 12V or 24V DC systems. Each position uses an illuminated 15A circuit breaker that combines switching, ON indication, and overcurrent protection in a single rocker, so the operator can see at a glance which circuits are live and reset a tripped breaker without tools. The panel is rated for a maximum operating amperage of 45A and terminates with 1\/4 inch male quick connect terminals plus an M5 (#10) ring terminal size for the supply connection.\u003c\/p\u003e\u003cp\u003eThe panel surface is molded from polycarbonate\/ABS that is UV-stabilized and flame retardant, and it will not corrode in a marine environment. Silicone breaker boots and a watertight mounting gasket seal each switch against water ingress; with the gasket installed, the panel front carries an IP66 rating, protecting against powerful water jets. The panel ships in a gray finish sized to industry-standard dimensions and mounting centers, so it drops into an existing panel cutout without modification. Installation hardware -- stainless steel #6 x 5\/8 inch mounting screws -- and 15 common square circuit labels are included along with instructions, so the panel is ready to label and wire for its intended circuits out of the box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Contura Water-Resistant Circuit Breaker Panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Positions:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Breaker Rating:\u003c\/strong\u003e 15 Amps (illuminated, per position)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Voltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Operating Amperage:\u003c\/strong\u003e 45 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 1\/4 inch Male Quick Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing Terminal Size:\u003c\/strong\u003e M5 (#10)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Stainless steel #6 x 5\/8 inch mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4.625 inches (117.47 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5.0 inches (127 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 1.75 inches (44.45 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Centers (Width):\u003c\/strong\u003e 4.125 inches (104.77 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Centers (Height):\u003c\/strong\u003e 4.437 inches (112.69 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate\/ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP66 (panel front, when mounted with gasket)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085043209\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Panel, 15 common square labels, stainless steel #6 5\/8 inch mounting screws, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many circuits does the Blue Sea Systems 4320 control?\u003c\/strong\u003e The 4320 has 4 positions, each with its own illuminated 15A circuit breaker, giving consolidated switching and overcurrent protection for up to four DC accessories such as bilge pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this panel waterproof?\u003c\/strong\u003e Silicone breaker boots and a watertight mounting gasket seal the 4320's switches against water ingress, and with the gasket installed the panel front is rated IP66, protecting against powerful water jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage systems does the 4320 work with?\u003c\/strong\u003e It is designed for 12V or 24V DC systems, with a nominal rating of 12 Volts DC and a maximum operating amperage of 45A across the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the mounting dimensions of the 4320 panel?\u003c\/strong\u003e The panel measures 4.625 inches wide by 5.0 inches high by 1.75 inches deep, with mounting centers of 4.125 inches by 4.437 inches, matching industry-standard circuit breaker panel cutouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal type does the 4320 use for wiring?\u003c\/strong\u003e Each circuit breaker terminates in a 1\/4 inch male quick connect terminal, and the panel's supply connection uses an M5 (#10) ring terminal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the panel made of?\u003c\/strong\u003e The Blue Sea Systems 4320 panel surface is polycarbonate\/ABS that is UV-stabilized and flame retardant and will not corrode in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the 4320 available in for this listing?\u003c\/strong\u003e This part number, 4320, is finished in gray; a camo-finish version with the same 4-position layout is sold under a different Blue Sea Systems part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with the 4320 panel?\u003c\/strong\u003e The 4320 ships with the panel itself, 15 common square circuit labels, stainless steel #6 x 5\/8 inch mounting screws, and installation instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 4320 weigh?\u003c\/strong\u003e The Blue Sea Systems 4320 circuit breaker panel weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I retrofit the 4320 into an existing panel cutout?\u003c\/strong\u003e Yes, the 4320 uses industry-standard sizing and mounting centers, so it is designed to be easily retrofitted into an existing panel opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat breaker rating does each position on the 4320 use?\u003c\/strong\u003e Each of the 4 positions on the 4320 uses an illuminated 15A circuit breaker that provides switching, ON indication, and overcurrent protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Blue Sea Systems 4320?\u003c\/strong\u003e The UPC for the 4320 gray 4-position circuit breaker panel is 632085043209.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989498573019,"sku":"BSS-4320","price":55.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/4320.jpg?v=1784507038","url":"https:\/\/www.goodvibesmarina.com\/products\/blue-sea-systems-4320-water-resistant-4-position-circuit-breaker-switch-panel-gray-12v-24v-dc-ip66","provider":"Good Vibes Marina","version":"1.0","type":"link"}