{"product_id":"blue-sea-systems-5064-ato-atc-in-line-fuse-holder-30a-with-12-awg-pigtails","title":"Blue Sea Systems 5064 ATO\/ATC In-Line Fuse Holder, 30 Amp Maximum","description":"\u003cp\u003eThe Blue Sea Systems 5064 is an in-line fuse holder built to accept standard ATO or ATC blade-style fuses, letting you add point-of-use circuit protection anywhere along a wire run without a panel or fuse block. The housing is molded from plastic and mounts using a through-hole mounting type, making it a compact option for tucking into tight spaces behind panels, under helm stations, or inline with accessory wiring. It accepts wire from 12 to 18 AWG and comes supplied with 12 AWG pigtail leads on each end, ready to be spliced or crimped into an existing circuit. Maximum fuse amperage is 30 Amps, so it is sized for lighting circuits, pumps, electronics, and other moderate-draw accessory loads rather than high-current feeds. The fuse itself is sold separately, so pick the ATO or ATC amperage rating that matches the circuit you are protecting. Blue Sea Systems also notes compatibility for use with its ANL fuse blocks as part of a broader circuit protection setup. This is a simple, functional part: no motors, no electronics, just a reliable physical connection point that keeps a fuse accessible for inspection and replacement instead of buried in a wire loom.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 5064\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e In-Line Fuse Holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Type:\u003c\/strong\u003e ATO or ATC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Fuse Amperage:\u003c\/strong\u003e 30 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Gauge Compatibility:\u003c\/strong\u003e 12 to 18 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Pigtails:\u003c\/strong\u003e 12 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Through-Hole Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multicolor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5 x 2 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 632085050641\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fuse Blocks:\u003c\/strong\u003e Blue Sea Systems ANL Fuse Blocks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat fuse type does the Blue Sea Systems 5064 use?\u003c\/strong\u003e It is built for standard ATO or ATC blade-style fuses; the fuse itself is sold separately from the 5064 holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum amperage for the 5064 fuse holder?\u003c\/strong\u003e 30 Amps is the maximum fuse amperage rating for the Blue Sea Systems 5064 in-line fuse holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire gauge works with this fuse holder?\u003c\/strong\u003e The Blue Sea 5064 accepts wire from 12 to 18 AWG and is supplied with 12 AWG pigtail leads on each end for splicing into a circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 5064 come with pigtail leads already attached?\u003c\/strong\u003e Yes, the 5064 is supplied with 12 AWG pigtails so it can be spliced or crimped directly into an existing wire run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a fuse included with the Blue Sea 5064?\u003c\/strong\u003e No, the fuse is sold separately; the 5064 is the holder only, and you select the ATO or ATC fuse amperage that matches your circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Blue Sea 5064 mounted?\u003c\/strong\u003e It uses a through-hole mounting type, allowing it to be secured in place along a wire run rather than free-floating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 5064 fuse holder made of?\u003c\/strong\u003e The housing is molded from plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Blue Sea 5064?\u003c\/strong\u003e The Blue Sea Systems 5064 measures 5 x 2 x 1 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 5064 fuse holder weigh?\u003c\/strong\u003e The 5064 weighs 0.03 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 5064 be used with Blue Sea ANL fuse blocks?\u003c\/strong\u003e Blue Sea Systems lists the 5064 as usable with its ANL fuse blocks as part of a broader circuit protection setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Blue Sea 5064 different from the 5065?\u003c\/strong\u003e Yes, the 5064 is the standard ATO or ATC in-line fuse holder, while the 5065 is a separate, waterproof version; they are different part numbers.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":48989502079195,"sku":"BSS-5064","price":5.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/5064.jpg?v=1784507084","url":"https:\/\/www.goodvibesmarina.com\/products\/blue-sea-systems-5064-ato-atc-in-line-fuse-holder-30a-with-12-awg-pigtails","provider":"Good Vibes Marina","version":"1.0","type":"link"}