{"product_id":"bobs-machine-action-series-hydraulic-tilt-and-trim-100-701100-nopc-for-clamp-on-motors-up-to-30-hp","title":"Bob's Machine Action Series Hydraulic Tilt and Trim 100-701100-NOPC for Clamp-On Motors up to 30 HP","description":"\u003cp\u003eThe Bob's Machine Action Series Hydraulic Tilt and Trim is an all-in-one tilt and trim unit built for clamp-on outboard motors up to 30 HP. Designed to simplify rigging and improve on-water performance, this unit lets skippers trim the boat for a smoother, drier ride while making it easy to raise and lower the motor at the launch ramp. When fully trimmed in, the unit provides a negative 3-degree tuck-under angle that helps the boat get on plane faster from a standing start. Once on plane, the boat's running angle can be fine-tuned by trimming the unit up to its maximum of 75 degrees for the best balance of speed and handling.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward since the tilt and trim arrives complete with a trim plate, wiring harness, relays, and a rocker style control switch, so there is no need to source separate components. The unit carries a 5-1\/2 inch standard setback and has overall mounting dimensions of 10 inches wide by 11.5 inches long. Bob's Machine backs the Action Series Tilt and Trim with a limited lifetime structural warranty, reflecting its build quality for repeated use on clamp-on motor applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-701100-NOPC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Tilt and Trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e Clamp-on motors up to 30 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Tilt Angle:\u003c\/strong\u003e 75 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Angle (fully trimmed in):\u003c\/strong\u003e Negative 3 degree tuck-under angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Setback:\u003c\/strong\u003e 5-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Mounting Dimensions:\u003c\/strong\u003e 10 inches width x 11.5 inches length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime structural warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Trim plate, wiring harness, relays, rocker style control switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 894721000872\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eClamp-on outboard motors up to 30 HP\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the Bob's Machine Action Series Tilt and Trim?\u003c\/strong\u003e The Bob's Machine Action Series Tilt and Trim, part number 100-701100-NOPC, is designed for clamp-on motors up to 30 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this tilt and trim work with clamp-on outboard motors only?\u003c\/strong\u003e Yes, the 100-701100-NOPC tilt and trim is designed specifically for clamp-on motors and is not intended for other mounting styles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum tilt angle on this unit?\u003c\/strong\u003e It trims up to a maximum of 75 degrees, allowing the boat's running angle to be optimized after reaching plane.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens when the tilt and trim is fully trimmed in?\u003c\/strong\u003e When fully trimmed in, the Action Series Tilt and Trim provides a negative 3-degree tuck-under angle for faster starts and quicker time to plane.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much setback does this tilt and trim have?\u003c\/strong\u003e The Bob's Machine Action Series Tilt and Trim has a 5-1\/2 inch standard setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall mounting dimensions of this unit?\u003c\/strong\u003e The overall mounting dimensions of the 100-701100-NOPC tilt and trim are 10 inches wide by 11.5 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Bob's Machine Action Series Tilt and Trim weigh?\u003c\/strong\u003e This tilt and trim weighs 35 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this tilt and trim unit?\u003c\/strong\u003e The 100-701100-NOPC ships complete with a trim plate, wiring harness, relays, and a rocker style control switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a separate hydraulic pump required to run this unit?\u003c\/strong\u003e No, the Action Series Tilt and Trim is an all-in-one unit, so no separate pump needs to be mounted or plumbed inside the boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow difficult is it to install this tilt and trim?\u003c\/strong\u003e Installation is straightforward since the 100-701100-NOPC arrives as a complete all-in-one unit with the wiring harness, relays, and switch already included, requiring only connection of power and switch wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the Bob's Machine Action Series Tilt and Trim?\u003c\/strong\u003e This unit carries a limited lifetime structural warranty from Bob's Machine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this tilt and trim adjust the boat's ride while underway?\u003c\/strong\u003e Yes, the 100-701100-NOPC allows skippers to trim the boat for a smoother, drier ride, in addition to raising and lowering the motor at the launch ramp.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465445595,"sku":"BOB-100-701100","price":1114.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/100-701100__86865.1722501916.500.750.jpg?v=1785163490","url":"https:\/\/www.goodvibesmarina.com\/products\/bobs-machine-action-series-hydraulic-tilt-and-trim-100-701100-nopc-for-clamp-on-motors-up-to-30-hp","provider":"Good Vibes Marina","version":"1.0","type":"link"}