{"product_id":"bobs-machine-shop-100-506000-nopc-nospn-versa-series-jack-plate-6-inch-setback-300-hp-max","title":"Bob's Machine Shop 100-506000-NOPC-NOSPN Versa Series Jack Plate, 6 Inch Setback, 300 HP Max","description":"\u003cp\u003eThe Bob's Machine Shop Versa Series Jack Plate (100-506000-NOPC-NOSPN) is a manual jack plate built for outboard-powered boats running engines up to 300 HP. It is machined from aircraft-grade aluminum in a one-piece design, so there is no need for the setback spacers that many competing jack plates require to reach the same 6 inch setback. The plate mounts between the transom and the outboard, letting the operator raise or lower engine height and adjust it while the boat is in the water to fine-tune performance, hole shot, and fuel efficiency.\u003c\/p\u003e\u003cp\u003eWhat sets the Versa Series apart is its upgrade path: it is built to be converted from manual to full hydraulic operation whenever the owner chooses. Using basic hand tools, the manual screw assembly can be removed and replaced with a hydraulic cylinder kit, with the hydraulic pump mounted inside the boat for protection from the elements and longer service life. The plate includes tension rods and automotive grease nipples for easy lubrication, and it comes pre-drilled for side-mount power poles, simplifying accessory installation. The aluminum structure carries a limited lifetime warranty, and it is made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-506000-NOPC-NOSPN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Versa Series (Versa Jac)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Color:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 22 x 19.25 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 300 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, field-upgradable to hydraulic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure Warranty:\u003c\/strong\u003e Limited lifetime\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Pump Warranty (if upgraded):\u003c\/strong\u003e 5 years, excluding water damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 894721000674\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRated for outboard engines up to 300 HP; not restricted to a specific make or model.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo OEM cross-reference numbers are specified for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on the Versa Series Jack Plate?\u003c\/strong\u003e The Bob's Machine Shop Versa Series Jack Plate (100-506000-NOPC-NOSPN) has a 6 inch setback, built as a single piece so no separate setback spacer is needed to achieve that distance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for this jack plate?\u003c\/strong\u003e This jack plate is rated for outboard engines up to 300 HP maximum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this jack plate be adjusted with the boat in the water?\u003c\/strong\u003e Yes, the Versa Series jack plate is designed to be raised or lowered while the boat is in the water, so engine height can be tuned without hauling out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate manual or hydraulic?\u003c\/strong\u003e It ships as a manual screw-operated jack plate. The Versa Series is designed so it can later be upgraded to full hydraulic operation by swapping the manual screw assembly for a hydraulic cylinder kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the jack plate made of?\u003c\/strong\u003e The 100-506000-NOPC-NOSPN Versa Series jack plate is made of aircraft-grade aluminum with a silver finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The Bob's Machine Shop Versa Series Jack Plate weighs 63 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this jack plate?\u003c\/strong\u003e This jack plate measures 22 x 19.25 x 12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate work with side-mount power poles?\u003c\/strong\u003e Yes, the Versa Series jack plate is pre-drilled for side-mount power poles, so no additional drilling is needed for that accessory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this jack plate different from other setback jack plates?\u003c\/strong\u003e Unlike competing designs that need separate setback spacers to reach the same distance, the 100-506000-NOPC-NOSPN Versa Series jack plate uses a one-piece body to achieve its 6 inch setback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with this jack plate?\u003c\/strong\u003e The aluminum structure of the Versa Series Jack Plate carries a limited lifetime warranty; if later upgraded with a hydraulic pump, the pump itself carries a 5 year warranty that excludes water damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the jack plate need lubrication?\u003c\/strong\u003e Yes, it is fitted with automotive grease nipples so the moving components can be lubricated with a standard grease gun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools are needed to upgrade this jack plate to hydraulic?\u003c\/strong\u003e Converting the 100-506000-NOPC-NOSPN from manual to hydraulic only requires basic hand tools to remove the manual screw assembly and install the hydraulic cylinder kit and pump.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027465347291,"sku":"BOB-100-506000","price":992.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/318ymG6KZmL.jpg?v=1785331102","url":"https:\/\/www.goodvibesmarina.com\/products\/bobs-machine-shop-100-506000-nopc-nospn-versa-series-jack-plate-6-inch-setback-300-hp-max","provider":"Good Vibes Marina","version":"1.0","type":"link"}