{"product_id":"bobs-machine-shop-kick-back-jac-plate-45-degree-tilt-up-jack-plate-for-outboards-up-to-115-hp","title":"Bob's Machine Shop Kick-Back Jac Plate - 45 Degree Tilt Up Jack Plate for Outboards up to 115 HP","description":"\u003cp\u003eThe Bob's Machine Shop Kick-Back Jac Plate, also known as the \"Stump Jumper,\" is a jack plate that gives outboard motors up to 115 HP a 45 degree tilt up (kick up) function. Instead of relying on chains or springs like many other jack plates, it uses Delrin rollers and bearings at the pivot points to deliver smooth, long-lasting kick-up operation. Integrated locking pins hold the plate in place so it will not kick out unexpectedly when the motor is run in reverse or while the boat is being trailered. A motor tether attachment point is built in for added safety, and the pivot points are greaseable through automotive zerk fittings for straightforward maintenance.\u003c\/p\u003e\u003cp\u003eThis jack plate is rated for outboard motors up to a maximum of 115 HP and is designed to let the motor kick up when it contacts an obstruction while moving forward at speeds up to 5 MPH; it is not designed or intended to encounter obstructions while the boat is operating in reverse. The plate measures 17.5 inches wide by 12 inches high with a 5.5 inch offset. For boaters running a clamp-on outboard, Bob's Machine Shop also offers an optional Clamp-On Motor Adapter Plate (part number 100-105001) that works with this Kick-Back Jac Plate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bob's Machine Shop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 100-105000-NOPC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 34.85 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 17.5 inches wide x 12 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Angle:\u003c\/strong\u003e 45 degrees (kick up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Horsepower:\u003c\/strong\u003e 115 horsepower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Delrin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing\/Roller Type:\u003c\/strong\u003e Delrin rollers and bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Points:\u003c\/strong\u003e Greaseable, automotive zerk fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Engine mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Salt water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 818377010948\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessory:\u003c\/strong\u003e Clamp-On Motor Adapter Plate, part number 100-105001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits outboard motors up to a maximum of 115 HP\u003c\/li\u003e\n\u003cli\u003eKick-up action intended for forward-direction contact with obstructions at speeds up to 5 MPH; not intended for reverse-direction impacts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum horsepower rating for the Bob's Machine Shop Kick-Back Jac Plate?\u003c\/strong\u003e The Kick-Back Jac Plate, part number 100-105000-NOPC, is rated for outboard motors up to a maximum of 115 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this jack plate weigh?\u003c\/strong\u003e The Bob's Machine Shop Kick-Back Jac Plate weighs 34.85 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and offset of this jack plate?\u003c\/strong\u003e The plate measures 17.5 inches wide by 12 inches high, with a 5.5 inch offset and a 45 degree tilt up (kick up) angle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it called the \"Stump Jumper\"?\u003c\/strong\u003e The Kick-Back Jac Plate is also known as the \"Stump Jumper\" because its kick-up design lets the motor tilt up 45 degrees when it contacts an obstruction while moving forward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this jack plate kick up while running in reverse?\u003c\/strong\u003e No. The Kick-Back Jac Plate, 100-105000-NOPC, is designed to encounter obstructions only in the forward direction at speeds up to 5 MPH; it is not designed or intended for obstructions encountered while operating in reverse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the jack plate from kicking out during trailering or reverse operation?\u003c\/strong\u003e Integrated locking pins hold the Kick-Back Jac Plate in position so it will not kick out unexpectedly when the motor is in reverse or while the boat is being trailered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the rollers and bearings made from?\u003c\/strong\u003e The Bob's Machine Shop Kick-Back Jac Plate uses Delrin rollers and bearings, which allow smooth pivoting and long life without the chains or springs found on some other jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this jack plate need regular maintenance?\u003c\/strong\u003e Yes, the pivot points on the 100-105000-NOPC Kick-Back Jac Plate are greaseable through automotive zerk fittings, making routine maintenance straightforward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a safety attachment point for the motor?\u003c\/strong\u003e Yes, the Kick-Back Jac Plate includes a motor tether attachment point for added safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this jack plate suitable for saltwater use?\u003c\/strong\u003e Yes, the Bob's Machine Shop Kick-Back Jac Plate is recommended for use in salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this jack plate with a clamp-on outboard motor?\u003c\/strong\u003e Yes, for clamp-on motors Bob's Machine Shop offers an optional Clamp-On Motor Adapter Plate, part number 100-105001, that is designed to work with the Kick-Back Jac Plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color finish does this jack plate come in?\u003c\/strong\u003e The Bob's Machine Shop Kick-Back Jac Plate, 100-105000-NOPC, has a silver finish.\u003c\/p\u003e","brand":"Bob's Machine Shop","offers":[{"title":"Default Title","offer_id":49027464724699,"sku":"BOB-100-105000","price":787.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/100-105000__88911.1722484762.500.750.jpg?v=1785163490","url":"https:\/\/www.goodvibesmarina.com\/products\/bobs-machine-shop-kick-back-jac-plate-45-degree-tilt-up-jack-plate-for-outboards-up-to-115-hp","provider":"Good Vibes Marina","version":"1.0","type":"link"}