{"product_id":"carburetor-repair-kit-for-evinrude-johnson-125-140-hp-outboards-replaces-oem-432962-mpn-1300-02364","title":"EMP Carburetor Repair Kit, Replaces OEM 432962, for Evinrude 125-140 HP Outboards (1300-02364)","description":"\u003cp\u003eThis EMP carburetor repair kit restores worn or leaking carburetors on select Evinrude outboard motors to proper working condition. It is designed as a direct replacement for OEM part number 432962 and is built without a float, so it pairs with the carburetor's existing float assembly during a rebuild. The kit is intended for outboard owners and marine technicians performing routine carburetor maintenance, addressing common issues such as rough idle, hard starting, and fuel leaks caused by deteriorated gaskets and seals. Because carburetor performance directly affects fuel delivery and engine reliability, keeping the internal components fresh with a proper repair kit helps the motor run smoothly and start consistently season after season. This kit is application-specific to the Evinrude outboard models and years listed below, so confirming the horsepower and model year before ordering ensures the correct fit. It is a lightweight, compact kit at 0.056 pounds, sized for the internal carburetor components it replaces rather than a full carburetor assembly. Installation follows standard carburetor rebuild practice: disassemble the carburetor, remove the old gaskets and worn components, clean the carburetor body, and install the new kit contents before reassembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e EMP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1300-02364\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Carburetor Repair Kit (without float)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.056 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840080489520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces (OEM):\u003c\/strong\u003e 432962\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvinrude 125 HP (1993)\u003c\/li\u003e\n\u003cli\u003eEvinrude 125C HP (1989-95)\u003c\/li\u003e\n\u003cli\u003eEvinrude 140 HP (1985-90)\u003c\/li\u003e\n\u003cli\u003eEvinrude 140 HP (1993)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e432962\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does this EMP carburetor repair kit include?\u003c\/strong\u003e The EMP carburetor repair kit, part number 1300-02364, is a carburetor kit without float, meaning it includes the internal rebuild components used with the carburetor's existing float assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit a genuine EMP part or an aftermarket copy?\u003c\/strong\u003e Part number 1300-02364 is an EMP-branded carburetor repair kit manufactured as a replacement for OEM part 432962.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Evinrude outboards does this carburetor kit fit?\u003c\/strong\u003e This kit fits Evinrude 125 HP outboards from 1993, 125C HP outboards from 1989-95, and 140 HP outboards from 1985-90 and 1993.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes kit 1300-02364 replace OEM part 432962?\u003c\/strong\u003e Yes, EMP carburetor repair kit 1300-02364 replaces OEM part number 432962.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this carburetor repair kit weigh?\u003c\/strong\u003e The EMP carburetor repair kit 1300-02364 weighs 0.056 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit a 1990 Evinrude 125 HP outboard?\u003c\/strong\u003e No. Based on the fitment for kit 1300-02364, the 125 HP application covers 1993 only; the 125C HP variant covers 1989-95, so the exact model designation and year should be confirmed before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this carburetor kit come with a float?\u003c\/strong\u003e No, kit 1300-02364 is a carburetor kit without float, so the existing float is reused during the rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this EMP carburetor kit?\u003c\/strong\u003e The UPC for the EMP carburetor repair kit 1300-02364 is 840080489520.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this kit be used on a 140 HP Evinrude from any year?\u003c\/strong\u003e This kit fits the Evinrude 140 HP for the 1985-90 and 1993 model years specifically, per the fitment listed for part 1300-02364.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a 125C HP Evinrude the same as a standard 125 HP for this kit?\u003c\/strong\u003e They are listed as separate applications for kit 1300-02364: the 125 HP fits 1993, while the 125C HP fits 1989-95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms indicate this carburetor kit is needed?\u003c\/strong\u003e Rough idle, hard starting, or fuel leaks from the carburetor are common signs that a rebuild with a kit like the EMP 1300-02364 is needed.\u003c\/p\u003e","brand":"EMP","offers":[{"title":"Default Title","offer_id":48991280103643,"sku":"EMP-1300-02364","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/EMP_1300-02364_BRP_Carburetor_Rebuild_Kit__52819.1722346539.500.750.jpg?v=1785329102","url":"https:\/\/www.goodvibesmarina.com\/products\/carburetor-repair-kit-for-evinrude-johnson-125-140-hp-outboards-replaces-oem-432962-mpn-1300-02364","provider":"Good Vibes Marina","version":"1.0","type":"link"}