{"product_id":"ce-smith-1-inch-trailer-hub-kit-galvanized-5-x-4-5-inch-bolt-pattern-1250-lb-capacity-13215","title":"CE Smith 1 Inch Trailer Hub Kit, Galvanized, 5 x 4.5 Inch Bolt Pattern, 1250 lb Capacity (13215)","description":"\u003cp\u003eThe CE Smith 1 Inch Trailer Hub Kit (13215) is a complete, pre-assembled boat trailer hub built to bolt onto a 1 inch straight shaft axle with a minimum of mess or fuss. The bearings arrive pre-greased and installed, so the hub goes onto the axle ready for service rather than requiring separate bearing packing before mounting. Construction is galvanized to resist the corrosion that saltwater and boat-launch environments cause on unprotected steel, making this kit suited to marine trailer use over the long term.\u003c\/p\u003e\u003cp\u003eThe hub uses a 5 stud x 4.5 inch bolt circle diameter and a 1.98 inch hub inner diameter, and is rated for a 1250 pound load capacity with a 12 inch maximum wheel size, matching it to small to mid-size boat trailer wheel assemblies. Each kit ships complete with everything needed to finish the installation: a carry case for the included small parts, a dust cap to keep contaminants out of the hub, a cotter pin, and lug nuts. Because the hub arrives with bearings already installed, the buyer is not left sourcing separate bearing sets or races to complete the job.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CE Smith\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 13215\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5 stud x 4.5 inch bolt circle diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 1 inch straight shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 1250 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wheel Size:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Inner Diameter:\u003c\/strong\u003e 1.98 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Flange Diameter:\u003c\/strong\u003e 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Lubricant:\u003c\/strong\u003e Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Carry case, dust cap, cotter pin, and lug nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9.8 x 8.2 x 4.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e One year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 768296009892\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size axle shaft does the CE Smith 13215 hub kit fit?\u003c\/strong\u003e The CE Smith 13215 is built for a 1 inch straight shaft axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bolt pattern on this trailer hub kit?\u003c\/strong\u003e The CE Smith 13215 hub uses a 5 stud x 4.5 inch bolt circle diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the CE Smith 13215 hub kit carry?\u003c\/strong\u003e It is rated for a 1250 pound load capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the bearings need to be greased before installation?\u003c\/strong\u003e No, the CE Smith 13215 Trailer Hub Kit ships with pre-greased bearings already installed, so it mounts directly onto the axle without a separate packing step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with this hub kit?\u003c\/strong\u003e The kit includes the hub with pre-greased bearings, a carry case, a dust cap, a cotter pin, and lug nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CE Smith 13215 hub made from?\u003c\/strong\u003e It is made of galvanized steel, which resists corrosion in marine and boat-launch environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum wheel size for this hub?\u003c\/strong\u003e The CE Smith 13215 supports up to a 12 inch maximum wheel size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hub inner diameter on the 13215 kit?\u003c\/strong\u003e The hub inner diameter is 1.98 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CE Smith 13215 Trailer Hub Kit weigh?\u003c\/strong\u003e It weighs 6.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a warranty on the CE Smith 13215 hub kit?\u003c\/strong\u003e Yes, it is covered by a one year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the overall dimensions of the CE Smith 13215 hub kit?\u003c\/strong\u003e The kit measures 9.8 x 8.2 x 4.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CE Smith 13215 hub kit different from CE Smith's 1-1\/16 inch or 1-3\/8 inch hub kits?\u003c\/strong\u003e Yes, the 13215 is sized for a 1 inch straight shaft with a 1250 pound capacity, while CE Smith's other hub kits are built for larger 1-1\/16 inch and 1-3\/8 inch tapered shafts with higher load capacities.\u003c\/p\u003e","brand":"CE Smith","offers":[{"title":"Default Title","offer_id":49027473211611,"sku":"CES-13215","price":62.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/13215__32109.1722514620.500.750.jpg?v=1785163500","url":"https:\/\/www.goodvibesmarina.com\/products\/ce-smith-1-inch-trailer-hub-kit-galvanized-5-x-4-5-inch-bolt-pattern-1250-lb-capacity-13215","provider":"Good Vibes Marina","version":"1.0","type":"link"}