{"product_id":"ce-smith-26244ga-pontoon-wing-bracket-7-inch-adjustment-slot-hot-dip-galvanized-steel","title":"CE Smith 26244GA Pontoon Wing Bracket, 7 Inch Adjustment Slot, Hot Dip Galvanized Steel","description":"\u003cp\u003eThe CE Smith 26244GA Pontoon Wing Bracket is a bolster-style bracket built to support bunk boards in the shallow V cradle configuration that best suits pontoon hulls. Instead of the flat bunk arrangement used on standard V-hull trailers, pontoon trailers need bunk boards angled to cradle the boat's twin or triple tubes, and this wing bracket provides that angled support point. A 7 inch lateral adjustment slot lets the bracket slide to the exact position needed for precise pontoon-to-trailer alignment, so the bunk boards can be set to match the specific spacing of the pontoon hull being carried.\u003c\/p\u003e\u003cp\u003eThe bracket is stamped from 1\/8 inch thick steel and hot dip galvanized for corrosion resistance in wet, trailered marine use. It is designed to be used with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat, and CE Smith recommends installing one bracket at each frame cross member of the trailer for maximum support and load capacity. Because pontoon hulls concentrate weight differently than a single-hull boat, using enough brackets across the frame is what keeps the load stable and properly cradled during transport.\u003c\/p\u003e\u003cp\u003eOverall bracket size is 15 3\/4 inches by 2 inches by 6 inches, with a slot measuring 1\/2 inch wide by 7 inches long. Each bracket weighs 2.6 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CE Smith\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26244GA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pontoon Wing Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Size:\u003c\/strong\u003e 15 3\/4 inches x 2 inches x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Width:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Length:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hot dip galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Bunk Board Sizes:\u003c\/strong\u003e 2x6, 2x8, or 2x10 (laid flat)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e One bracket per frame cross member\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 768296007331\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CE Smith 26244GA Pontoon Wing Bracket used for?\u003c\/strong\u003e The 26244GA is a bolster bracket that supports bunk boards in a shallow V cradle configuration, which is the shape that best suits pontoon hulls rather than a single-hull boat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bracket fit my pontoon trailer?\u003c\/strong\u003e The 26244GA bracket includes a 7 inch lateral adjustment slot so it can be positioned to match the specific spacing needed for a pontoon hull, and it mounts at the trailer's frame cross members.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size bunk boards work with the 26244GA bracket?\u003c\/strong\u003e This bracket is designed for use with 2x6, 2x8, or 2x10 carpeted bunk boards installed laid flat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CE Smith pontoon wing bracket made of?\u003c\/strong\u003e It is made from 1\/8 inch thick steel that is hot dip galvanized for corrosion resistance in marine trailering conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many 26244GA brackets does a trailer need?\u003c\/strong\u003e CE Smith recommends installing one 26244GA bracket at each frame cross member of the trailer for maximum support and load capacity, so the total needed depends on how many cross members the trailer has.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 26244GA bracket?\u003c\/strong\u003e The bracket measures 15 3\/4 inches by 2 inches by 6 inches overall, with an adjustment slot that is 1\/2 inch wide and 7 inches long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the adjustment slot on this bracket work?\u003c\/strong\u003e The 7 inch lateral adjustment slot lets the 26244GA bracket slide along its length so it can be set to the exact position needed for proper pontoon-to-trailer alignment before tightening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 26244GA bracket rust resistant?\u003c\/strong\u003e Yes, it is constructed from hot dip galvanized steel, which resists rust and corrosion in wet trailering environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 26244GA bracket weigh?\u003c\/strong\u003e Each CE Smith 26244GA Pontoon Wing Bracket weighs 2.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 26244GA bracket be used on a standard single-hull boat trailer?\u003c\/strong\u003e The 26244GA is designed specifically to create the shallow V cradle configuration that suits pontoon hulls, rather than the flat bunk setup typical of single-hull trailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26244GA come as a single bracket or a set?\u003c\/strong\u003e The 26244GA is sold as an individual bracket; CE Smith recommends using one at each frame cross member, so multiple units are typically needed per trailer.\u003c\/p\u003e","brand":"CE Smith","offers":[{"title":"Default Title","offer_id":49027473834203,"sku":"CES-26244G","price":19.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/ces-26244g__38398.1619620444.500.750.jpg?v=1785163506","url":"https:\/\/www.goodvibesmarina.com\/products\/ce-smith-26244ga-pontoon-wing-bracket-7-inch-adjustment-slot-hot-dip-galvanized-steel","provider":"Good Vibes Marina","version":"1.0","type":"link"}