{"product_id":"ce-smith-8-inch-trailer-bolster-bracket-double-slot","title":"CE Smith 8 Inch Trailer Bolster Bracket, Double Slot","description":"\u003cp\u003eThe CE Smith 8 inch Trailer Bolster Bracket is designed to support trailer bolsters or bunks, giving your boat trailer a secure, adjustable mounting point for these components. The bracket is slotted for vertical adjustment, so it can be raised or lowered to match the height needed for your bolster or bunk setup, making it easier to get a proper, snug fit against the hull. Non-slip dimples are built into the bracket to help prevent movement once installed, which increases load capacity and helps keep the bolster or bunk securely in place under the weight of the boat. This is an 8 inch, double slot design, giving installers a bit more range when positioning the bracket on the trailer frame. It is a straightforward hardware component intended for use in building out or repairing a boat trailer's bunk or bolster support system. Because it is slotted rather than fixed, it allows for on-the-water fine-tuning of bolster and bunk position without having to replace hardware or drill new holes. This bracket is sold as a single unit for use alongside bolster or bunk boards on a trailer frame.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CE Smith\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 10100A40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Double Slot Bolster Bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 768296009298\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Slotted for vertical adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Feature:\u003c\/strong\u003e Non-slip dimples\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Boat Trailer Bunks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CE Smith 10100A40 bolster bracket used for?\u003c\/strong\u003e The CE Smith 10100A40 is an 8 inch trailer bolster bracket designed to support trailer bolsters or bunks on a boat trailer frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bracket adjustable?\u003c\/strong\u003e Yes, the CE Smith 10100A40 bracket is slotted for vertical adjustment, allowing you to raise or lower the mounted bolster or bunk to fit your boat's hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many slots does the CE Smith 10100A40 bracket have?\u003c\/strong\u003e This is a double slot bracket, giving two slotted positions for mounting and adjusting the bolster or bunk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CE Smith bolster bracket?\u003c\/strong\u003e The CE Smith 10100A40 bolster bracket measures 8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CE Smith 10100A40 bracket weigh?\u003c\/strong\u003e It weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat keeps the bracket from shifting once installed?\u003c\/strong\u003e Non-slip dimples are built into the CE Smith 10100A40 bracket to help prevent movement and increase load capacity once it is mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bracket come with the bolster or bunk board included?\u003c\/strong\u003e No, the CE Smith 10100A40 is the bracket only; it is designed to support a separately mounted bolster or bunk board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the CE Smith 10100A40 bracket?\u003c\/strong\u003e The UPC for this CE Smith 8 inch trailer bolster bracket is 768296009298.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bracket be used to fine-tune bunk position without drilling new holes?\u003c\/strong\u003e Yes, because the CE Smith 10100A40 is slotted for vertical adjustment, you can reposition the bolster or bunk within the slot range instead of drilling new mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CE Smith 10100A40 sold as a single bracket?\u003c\/strong\u003e Yes, this listing is for one 8 inch double slot bolster bracket.\u003c\/p\u003e","brand":"CE Smith","offers":[{"title":"Default Title","offer_id":49027472556251,"sku":"CES-10100A40","price":5.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/CE-Smith-8inch-Bolster-Bracket__69245.1722516990.500.750.jpg?v=1785163501","url":"https:\/\/www.goodvibesmarina.com\/products\/ce-smith-8-inch-trailer-bolster-bracket-double-slot","provider":"Good Vibes Marina","version":"1.0","type":"link"}