{"product_id":"dexter-008-430-90-oil-hub-and-drum-kit-9k-10k-general-duty-trailer-axle-8-on-6-5in-5-8in-studs-with-cone-nuts","title":"Dexter 90 Degree Cone Nut 008-430-90 for Clamp Ring Hub Assemblies, 9,000-15,000 lb Axles","description":"\u003cp\u003eThe Dexter 90 Degree Cone Nut, part number 008-430-90, is the specified fastener for hub assemblies that use a clamp ring on Dexter medium duty trailer axles. It is designed to seat against the clamp ring to properly preload and retain the wheel bearings on one-piece hub assemblies. This cone nut is used on 9K, 10K, and #13G General Duty one-piece hubs within Dexter's medium duty axle line, which covers axle capacities from 9,000 to 15,000 pounds.\u003c\/p\u003e\u003cp\u003eWhen a clamp ring is present on the hub assembly, the 90 degree cone nut is the required fastener; the flange nut is only used as an alternate when a clamp ring is not part of the assembly. Selecting the correct nut for the hub configuration is important for proper bearing preload and safe hub operation. This part is sold as the genuine Dexter cone nut for these applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 008-430-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 90 Degree Cone Nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Clamp Ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Fastener:\u003c\/strong\u003e Flange Nut (used when no clamp ring is present)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e 9K, 10K, and #13G General Duty One-Piece Hubs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity Range:\u003c\/strong\u003e 9,000-15,000 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDexter medium duty trailer axles, 9,000-15,000 lb capacity, one-piece hub assemblies (9K, 10K, #13G General Duty) fitted with a clamp ring\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter 008-430-90 cone nut used for?\u003c\/strong\u003e The Dexter 008-430-90 is a 90 degree cone nut used to retain and preload the wheel bearings on hub assemblies that include a clamp ring on Dexter medium duty trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a clamp ring to use this cone nut?\u003c\/strong\u003e Yes. The 90 degree cone nut, part number 008-430-90, is specified for use with a clamp ring; if the hub assembly does not have a clamp ring, a flange nut is used as the alternate fastener instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use a flange nut instead of the 008-430-90 cone nut?\u003c\/strong\u003e A flange nut is only the correct alternate fastener when there is no clamp ring on the hub assembly. Where a clamp ring is present, the Dexter 90 degree cone nut 008-430-90 must be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity range is this cone nut rated for?\u003c\/strong\u003e The Dexter 008-430-90 cone nut is used within Dexter's medium duty axle line, covering axle capacities of 9,000 to 15,000 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hub types does the 008-430-90 cone nut fit?\u003c\/strong\u003e This cone nut is used on 9K, 10K, and #13G General Duty one-piece hub assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 008-430-90 a genuine Dexter part?\u003c\/strong\u003e Yes, part number 008-430-90 is a genuine Dexter 90 degree cone nut for one-piece hub assemblies with a clamp ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the cone nut affect bearing preload?\u003c\/strong\u003e The 90 degree cone nut, 008-430-90, seats against the clamp ring on the hub assembly to properly preload and retain the wheel bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cone nut work on a one-piece hub without a clamp ring?\u003c\/strong\u003e The 008-430-90 cone nut is specified for one-piece hubs that include a clamp ring; hubs without a clamp ring instead use a flange nut as the alternate fastener.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991257034971,"sku":"DEX-008-430-90","price":790.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-8-on-6.5-9k-10k-hub-drum-kit-2009-and-newer-008-430-90__47432.1747363836.500.750.jpg?v=1785329081","url":"https:\/\/www.goodvibesmarina.com\/products\/dexter-008-430-90-oil-hub-and-drum-kit-9k-10k-general-duty-trailer-axle-8-on-6-5in-5-8in-studs-with-cone-nuts","provider":"Good Vibes Marina","version":"1.0","type":"link"}