{"product_id":"dexter-k08-219-1g-hub-drum-kit-for-7-000-lb-trailer-axle-8-6-50-bolt-circle-1-2-studs-12-x-2-drum-pre-greased","title":"Dexter Hub-Drum Kit K08-219-1G, 7,000 lb Axle, 8 on 6.50 Bolt Circle, 1\/2 inch Studs, Pre-Greased","description":"\u003cp\u003eThe Dexter K08-219-1G is a complete pre-greased hub-drum kit built for 7,000 lb trailer axles with an 8 on 6.50 inch bolt circle. It is studded for 1\/2 inch-20 wheel studs and is assembled and packed with Dexter grease, so it is ready to install straight from the box on trailers equipped with electric or hydraulic brakes. The kit is engineered around a 2.125 inch seal and uses a standard grease cap, matching the seal and cap sizing that Dexter specifies for this axle and bolt circle combination.\u003c\/p\u003e\u003cp\u003eInside the kit, the hub and drum are matched with a bearing cone (25580), cone nuts, a seal, and a grease cap, with an instruction sheet included to guide installation. Because everything is pre-assembled and pre-greased at the factory, installers do not need to hand-pack bearings or separately source a matching seal and cap, which reduces the chance of a mismatched part causing a bearing failure or grease leak down the road.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K08-219-1G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 7,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Circle:\u003c\/strong\u003e 8 on 6.50 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Stud Size:\u003c\/strong\u003e 1\/2 inch-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Size:\u003c\/strong\u003e 2.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease Cap:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Cone:\u003c\/strong\u003e 25580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 39.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983007158\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Bearings, Caps, Hub-drum, Lug nuts, Seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e K08-219-2G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7,000 lb axles\u003c\/li\u003e\n\u003cli\u003e8 on 6.50 inch bolt circle\u003c\/li\u003e\n\u003cli\u003eStudded for 1\/2 inch-20 wheel studs\u003c\/li\u003e\n\u003cli\u003e2.125 inch seal\u003c\/li\u003e\n\u003cli\u003eStandard grease cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eK08-219-2G\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat axle does the Dexter K08-219-1G hub-drum kit fit?\u003c\/strong\u003e The K08-219-1G is built for 7,000 lb trailer axles with an 8 on 6.50 inch bolt circle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel stud size does this kit use?\u003c\/strong\u003e Dexter K08-219-1G is studded for 1\/2 inch-20 wheel studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-219-1G come pre-greased?\u003c\/strong\u003e Yes, the hub and drum assembly is packed with Dexter grease at the factory, so it is ready to install without separately hand-packing the bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat seal size is used in this hub-drum kit?\u003c\/strong\u003e The K08-219-1G uses a 2.125 inch seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a grease cap included with the K08-219-1G?\u003c\/strong\u003e Yes, a standard grease cap is included as part of the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing does the K08-219-1G include?\u003c\/strong\u003e The kit includes a bearing cone (25580) as one of its components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dexter K08-219-1G hub-drum kit weigh?\u003c\/strong\u003e The K08-219-1G weighs 39.6 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-219-1G work with electric or hydraulic brakes?\u003c\/strong\u003e Yes, this hub-drum kit fits 7,000 lb axles equipped with either electric or hydraulic brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K08-219-1G kit?\u003c\/strong\u003e The K08-219-1G kit includes bearings, a hub-drum, seal, cone nuts, grease cap, and an instruction sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a comparable Dexter part number to the K08-219-1G?\u003c\/strong\u003e K08-219-2G is listed as the OEM equivalent part number to the K08-219-1G.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the hub-drum made from on the K08-219-1G?\u003c\/strong\u003e The Dexter K08-219-1G hub-drum kit is made of steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the K08-219-1G include installation instructions?\u003c\/strong\u003e Yes, an instruction sheet is included with the K08-219-1G kit to guide installation.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991259459803,"sku":"DEX-K08-219-1G","price":380.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-Pre-Greased-2-point-24-inch-7000lbs-Hub--Drum-Kit-K08-219-1G__77302.1747363798.500.750.jpg?v=1785188142","url":"https:\/\/www.goodvibesmarina.com\/products\/dexter-k08-219-1g-hub-drum-kit-for-7-000-lb-trailer-axle-8-6-50-bolt-circle-1-2-studs-12-x-2-drum-pre-greased","provider":"Good Vibes Marina","version":"1.0","type":"link"}