{"product_id":"dexter-k23-399-00-hydraulic-brake-kit-7-x-1-3-4-in-right-hand-uni-servo-2-200-lb-trailer-axle","title":"Dexter Axle K23-399-00 Right-Hand 7 x 1-3\/4 Inch Hydraulic Uni-Servo Trailer Brake Kit, 2,200 lbs","description":"\u003cp\u003eThe Dexter Axle K23-399-00 is a right-hand (RH) 7 inch x 1-3\/4 inch hydraulic uni-servo brake kit built for trailer axle positions rated to 2,200 lbs. This is a hydraulic-actuated drum brake assembly, using the uni-servo design that applies braking force through a single hydraulic wheel cylinder acting on both the primary and secondary brake shoes for consistent stopping performance.\u003c\/p\u003e\u003cp\u003eK23-399-00 is the right-hand version of this brake kit and mounts at the rear brake position on the trailer axle. It carries a machined exterior finish and weighs 11 pounds as packaged. Because this kit is side-specific, buyers should confirm they are ordering the correct side for their axle - the left-hand counterpart to this kit is a separate part number, K23-398-00, and the two are not interchangeable.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-399-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hydraulic Uni-Servo Brake Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 7 inches x 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Capacity:\u003c\/strong\u003e 2,200 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior Finish:\u003c\/strong\u003e Machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 5 x 5 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 876983002412\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRight-hand (RH) rear position on trailer axles sized for a 7 inch x 1-3\/4 inch hydraulic uni-servo brake\u003c\/li\u003e\n\u003cli\u003eLeft-hand (LH) axle position requires the separate K23-398-00 brake kit, not this part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dexter Axle K23-399-00 brake kit?\u003c\/strong\u003e K23-399-00 is a right-hand (RH) 7 inch x 1-3\/4 inch hydraulic uni-servo trailer brake kit rated for 2,200 lbs, designed to mount at the rear brake position on a trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake kit hydraulic or electric?\u003c\/strong\u003e K23-399-00 is a hydraulic uni-servo brake kit, meaning it is actuated by hydraulic pressure through a wheel cylinder rather than an electric brake magnet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes K23-399-00 fit the left or right side of the trailer?\u003c\/strong\u003e K23-399-00 is the right-hand (RH) version only. The left-hand (LH) side uses a different Dexter Axle part number, K23-398-00, so buyers need to order the correct side for each wheel position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use K23-399-00 on the left-hand side of my trailer?\u003c\/strong\u003e No. K23-399-00 is built specifically as a right-hand brake assembly and is not interchangeable with the left-hand side, which requires the separate Dexter Axle K23-398-00 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size brake does this kit use?\u003c\/strong\u003e This Dexter Axle hydraulic brake kit uses a 7 inch x 1-3\/4 inch brake, matching axles built for that hydraulic uni-servo brake size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the K23-399-00 brake handle?\u003c\/strong\u003e The K23-399-00 hydraulic uni-servo brake kit is rated for 2,200 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-399-00 brake kit weigh?\u003c\/strong\u003e The K23-399-00 brake kit weighs 11 pounds as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the exterior finish on this brake kit?\u003c\/strong\u003e The K23-399-00 kit has a machined exterior finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-399-00 a genuine Dexter Axle part?\u003c\/strong\u003e Yes, K23-399-00 is the public Dexter Axle manufacturer part number for this right-hand hydraulic uni-servo brake kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat position on the trailer does this brake kit install at?\u003c\/strong\u003e K23-399-00 is designated for the rear brake position on the trailer axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the packaged dimensions of the K23-399-00 kit?\u003c\/strong\u003e The K23-399-00 brake kit ships in packaging measuring 5 x 5 x 5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of brake mechanism does K23-399-00 use?\u003c\/strong\u003e K23-399-00 uses a uni-servo brake mechanism, where a single hydraulic wheel cylinder actuates both the primary and secondary brake shoes.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991260672219,"sku":"DEX-K23-399-00","price":126.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dexter-K23-399-00-7-inches-by-1-and-three-quarters-of-an-inch-2500lbs-Uni-Servo-Right-Hand-Hydraulic-Drum-Brake-Assembly__14437.1747363794.500.750.jpg?v=1785188729","url":"https:\/\/www.goodvibesmarina.com\/products\/dexter-k23-399-00-hydraulic-brake-kit-7-x-1-3-4-in-right-hand-uni-servo-2-200-lb-trailer-axle","provider":"Good Vibes Marina","version":"1.0","type":"link"}