{"product_id":"dexter-k23-465-00-brake-kit-12-x-2-7k-electric-right-hand-assembly-nev-r-adjust","title":"Dexter 12 Inch x 2 Inch 7K Electric Brake Kit, Right Hand, Nev-R-Adjust, K23-465-00","description":"\u003cp\u003eThe Dexter K23-465-00 is a complete 12 inch x 2 inch electric brake assembly rated for 7000 lb (7K) axle capacity, built for the right hand (RH) side of the trailer only. It uses Dexter's Nev-R-Adjust self-adjusting mechanism, which automatically compensates for shoe wear so brake clearance stays correct without periodic manual adjustment. This reduces maintenance time and helps keep braking performance consistent between service intervals.\u003c\/p\u003e\u003cp\u003eThe kit ships as a full assembly rather than a bare backing plate, so it includes the hardware needed to complete the installation: five hex nuts, two plugs, and an instruction sheet to guide the swap. Because the electric brake magnet and internal components are designed around the 7000 lb capacity rating, this kit is intended for axles matched to that load rating rather than lighter-duty applications.\u003c\/p\u003e\u003cp\u003eThis is the right hand (RH) specific brake assembly. It is not interchangeable side-to-side; the left hand brake for the opposite side of the axle is a separate part number. Confirm which side of the trailer needs service before ordering so the correct RH unit is installed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K23-465-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12 inches x 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity Rating:\u003c\/strong\u003e 7000 lbs (7K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right Hand (RH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Type:\u003c\/strong\u003e Nev-R-Adjust self-adjusting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Brake assembly, hex nuts (qty 5), plugs (qty 2), instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits 12 inch x 2 inch electric brake axle positions rated for 7000 lb (7K) capacity, right hand (RH) side only.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo manufacturer cross-reference numbers are listed for this part.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size axle does the Dexter K23-465-00 fit?\u003c\/strong\u003e The K23-465-00 is a 12 inch x 2 inch electric brake assembly built for axle positions rated at 7000 lbs (7K) capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this brake kit for the left or right side of the trailer?\u003c\/strong\u003e K23-465-00 is the right hand (RH) brake assembly only; it is not interchangeable with the left hand side, which uses a separate part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this brake self-adjust as the shoes wear?\u003c\/strong\u003e Yes, the K23-465-00 uses Dexter's Nev-R-Adjust mechanism, which automatically takes up slack as the brake shoes wear so manual adjustment is not required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the K23-465-00 kit?\u003c\/strong\u003e The kit includes the complete 12 inch x 2 inch electric brake assembly along with five hex nuts, two plugs, and an instruction sheet for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the K23-465-00 brake assembly weigh?\u003c\/strong\u003e This Dexter electric brake kit weighs 14 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the K23-465-00 be used on a 6000 lb rated axle?\u003c\/strong\u003e No, K23-465-00 is built for the 7000 lb (7K) capacity rating; use a brake kit matched to your axle's specific rated capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs K23-465-00 a complete brake assembly or just a backing plate?\u003c\/strong\u003e It is a complete 12 inch x 2 inch electric brake assembly, not a bare backing plate, and comes with the mounting hardware and instructions listed in the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Nev-R-Adjust mean on this Dexter brake?\u003c\/strong\u003e Nev-R-Adjust is Dexter's self-adjusting brake system used on the K23-465-00, designed to automatically maintain proper shoe-to-drum clearance as the brake wears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a separate part for the left hand side of the axle?\u003c\/strong\u003e Yes, K23-465-00 is the right hand (RH) unit only; the left hand side of the trailer requires a different Dexter part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre instructions included with the K23-465-00?\u003c\/strong\u003e Yes, an instruction sheet is included in the K23-465-00 kit along with the brake assembly and mounting hardware.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991261032667,"sku":"DEX-K23-465-00","price":188.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/dexter-12x2-right-hand-electric-drum-brake-assembly-7000lbs-nev-r-adjust__75764.1747363839.500.750.jpg?v=1785188532","url":"https:\/\/www.goodvibesmarina.com\/products\/dexter-k23-465-00-brake-kit-12-x-2-7k-electric-right-hand-assembly-nev-r-adjust","provider":"Good Vibes Marina","version":"1.0","type":"link"}