{"product_id":"dexter-k71-2h-10-ddd-10-integral-disc-brake-kit-dacromet-1-axle-for-3-500-3-700-lb-trailer-axles-bearings-seals-caps-included","title":"Dexter K71-2H-10-DDD 10 Inch Trailer Disc Brake Kit, One Axle Set, Dacromet Coated, Fits 3.5K-3.7K Axles","description":"\u003cp\u003eThe Dexter K71-2H-10-DDD is a complete one-axle trailer disc brake kit built around a 10 inch integral hub and rotor design, where the hub and rotor are machined as a single one-piece unit rather than a separate hub bolted to a rotor. The kit covers both wheel ends of one axle and is finished in a Dacromet (DAC) coating, a corrosion-resistant plating applied to the rotor, caliper, and mounting bracket to help the assembly hold up against road salt, moisture, and general trailer-towing exposure.\u003c\/p\u003e\u003cp\u003eEach side uses a caliper bracket that mounts to a standard 4-bolt brake flange, and the assembly is sized to fit inside 13 inch and larger trailer wheels. The wheel bolt pattern is 5 on 4.5 inches. This kit is intended for 3.5K-3.7K capacity trailer axles and comes as a full bearing and seal package rather than just brake hardware: it includes inner bearings, outer bearings, seals, dust caps, and lug nuts, so a single kit covers the rotating hardware for the axle along with the disc brake components.\u003c\/p\u003e\u003cp\u003eBecause bearing and seal requirements vary by axle manufacturer, note that UFP-brand axles require a different seal number than most of the rest of the trade uses for this same bearing set, which is called out below and in the FAQ so the correct seal ends up on the axle.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dexter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e K71-2H-10-DDD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Trailer Disc Brake Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Configuration:\u003c\/strong\u003e One Axle Kit (both wheel ends)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Size:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub and Rotor Design:\u003c\/strong\u003e Integral one-piece hub and rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Bolt Pattern:\u003c\/strong\u003e 5 on 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper Mounting:\u003c\/strong\u003e 4-bolt brake flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Clearance:\u003c\/strong\u003e Fits inside 13 inch and larger wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Dacromet (DAC) corrosion-resistant coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Bearing:\u003c\/strong\u003e L68149\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Bearing:\u003c\/strong\u003e L44649\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e 171255TB (168255 required for UFP axles)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Bearings, seals, dust caps, and lug nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 3.5K-3.7K trailer axles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 56.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 840327600404\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly Required:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for 3.5K-3.7K capacity trailer axles, and sized to fit inside 13 inch and larger trailer wheels.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does this kit include?\u003c\/strong\u003e The Dexter K71-2H-10-DDD is a complete one-axle kit that includes the integral hub and rotor units, calipers, mounting brackets, inner and outer bearings, seals, dust caps, and lug nuts for both wheel ends of the axle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat axle capacity is this brake kit made for?\u003c\/strong\u003e This kit is sized for 3.5K-3.7K capacity trailer axles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes one kit cover both wheels on the axle, or just one side?\u003c\/strong\u003e Yes, the K71-2H-10-DDD is a one-axle kit, meaning it covers both wheel ends of a single axle, not just one wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size rotor does this kit use?\u003c\/strong\u003e It uses a 10 inch rotor, built as an integral one-piece hub and rotor rather than a separate hub and rotor bolted together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit under a 13 inch wheel?\u003c\/strong\u003e The caliper and bracket assembly on the K71-2H-10-DDD is sized to fit inside 13 inch and larger trailer wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wheel bolt pattern does this kit use?\u003c\/strong\u003e The K71-2H-10-DDD uses a 5 on 4.5 inch wheel bolt pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat coating is used on the brake components?\u003c\/strong\u003e The rotor, caliper, and mounting bracket are finished in a Dacromet (DAC) coating, which resists corrosion from road salt and moisture during towing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bearing and seal numbers come with this kit?\u003c\/strong\u003e This kit includes inner bearing L68149, outer bearing L44649, and seal 171255TB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the seal number change depending on the axle brand?\u003c\/strong\u003e Yes. For the K71-2H-10-DDD kit, UFP-brand axles require seal number 168255, while the rest of the trade uses seal 171255TB with the same bearing set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the caliper bracket mount to the axle?\u003c\/strong\u003e The caliper bracket on this kit mounts to a standard 4-bolt brake flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this brake kit weigh?\u003c\/strong\u003e The complete Dexter K71-2H-10-DDD one-axle kit weighs 56.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs assembly required for this kit?\u003c\/strong\u003e Yes, assembly is required to install the K71-2H-10-DDD components onto the axle.\u003c\/p\u003e","brand":"Dexter","offers":[{"title":"Default Title","offer_id":48991263719643,"sku":"DEX-K71-2H-10-DDD","price":555.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Kodiak-Hub--Rotor-3700lbs-10-inch-One-Axle-Disc-Brake-Kit-by-Dexter-K71-2H-10-DDD__15396.1747363796.500.750.jpg?v=1785188993","url":"https:\/\/www.goodvibesmarina.com\/products\/dexter-k71-2h-10-ddd-10-integral-disc-brake-kit-dacromet-1-axle-for-3-500-3-700-lb-trailer-axles-bearings-seals-caps-included","provider":"Good Vibes Marina","version":"1.0","type":"link"}