{"product_id":"dometic-385311111-1-1-2-inch-sealing-grommet-replaces-sealand-600342932-vacuflush-toilet-inlet-elbow-seal","title":"Dometic 385311111 1-1\/2 Inch Sealing Grommet - Replaces Sealand 600342932 - Vacuflush Toilet Inlet Elbow Seal","description":"\u003cp\u003eThe Dometic 385311111 Sealing Grommet is a 1-1\/2 inch inner diameter replacement seal designed for the inlet elbow fittings on Dometic and Sealand vacuum holding tanks. It is used on Dometic Sealand VacuFlush VHT toilets, where it seals the connection point where the inlet elbow meets the vacuum holding tank, preventing air and water leaks that can compromise vacuum pressure in the system. Over time, rubber grommets in marine sanitation systems lose their seal from repeated flush cycles and exposure to holding tank contents, and a worn or cracked grommet is a common cause of a vacuum toilet system that will not hold vacuum or that leaks at the tank inlet fitting. Replacing this grommet restores a tight seal at the inlet elbow connection without requiring replacement of the entire vacuum holding tank or elbow fitting. It is a genuine Dometic spare part and serves as the direct OEM replacement for the earlier Sealand-branded part. The grommet measures 6 inches by 6 inches by 1 inch as packaged and is intended as a straightforward, single-component repair item for technicians and boat owners maintaining a Dometic or Sealand vacuum sanitation system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dometic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 385311111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6 inches L x 6 inches W x 1 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 713814046651\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNational Stock Number:\u003c\/strong\u003e 5325-01-612-8732\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Category:\u003c\/strong\u003e Marine Toilet Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned as a replacement part for inlet elbow fittings on Dometic\/Sealand vacuum holding tanks, and compatible with Dometic and Sealand Vacuflush toilets, including Dometic Sealand VacuFlush VHT toilets.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSealand 600342932\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Dometic 385311111 Sealing Grommet used for?\u003c\/strong\u003e It is a replacement part for the inlet elbow fittings on Dometic and Sealand vacuum holding tanks, sealing the connection where the elbow meets the tank on Dometic Sealand VacuFlush VHT toilets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 385311111 grommet compatible with my Dometic or Sealand Vacuflush toilet?\u003c\/strong\u003e Yes, the Dometic 385311111 Sealing Grommet is compatible with Dometic and Sealand Vacuflush toilets and is designed for use with Dometic Sealand VacuFlush VHT toilets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Dometic 385311111 sealing grommet?\u003c\/strong\u003e The grommet has a 1-1\/2 inch inner diameter and measures 6 inches long by 6 inches wide by 1 inch high as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes part 385311111 replace Sealand 600342932?\u003c\/strong\u003e Yes, the Dometic 385311111 Sealing Grommet is the direct replacement for Sealand part number 600342932.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Dometic 385311111 Sealing Grommet weigh?\u003c\/strong\u003e It weighs 0.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine OEM Dometic part or an aftermarket copy?\u003c\/strong\u003e The 385311111 Sealing Grommet is a genuine OEM Dometic spare part, not an aftermarket reproduction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the 385311111 grommet install on a Vacuflush toilet system?\u003c\/strong\u003e It installs at the inlet elbow fitting on the Dometic\/Sealand vacuum holding tank, sealing the joint between the elbow and the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the Dometic 385311111 Sealing Grommet?\u003c\/strong\u003e You receive one 1-1\/2 inch sealing grommet, part number 385311111, for the vacuum holding tank inlet elbow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 385311111 grommet fit other Dometic toilet models besides Vacuflush?\u003c\/strong\u003e It is specified for Dometic and Sealand Vacuflush toilets and Dometic Sealand VacuFlush VHT toilets; compatibility with other toilet models is not specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace the sealing grommet on my vacuum holding tank inlet elbow?\u003c\/strong\u003e A worn or cracked grommet at the inlet elbow can allow air or water to leak past the seal, so replacing the 385311111 grommet restores the seal at that connection point.\u003c\/p\u003e","brand":"Dometic Sanitation","offers":[{"title":"Default Title","offer_id":49027493167323,"sku":"DOM-385311111","price":15.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Dometic-385311111-1-and-one-half-inch-Sealing-Grommet__04792.1722513793.500.750.jpg?v=1785163816","url":"https:\/\/www.goodvibesmarina.com\/products\/dometic-385311111-1-1-2-inch-sealing-grommet-replaces-sealand-600342932-vacuflush-toilet-inlet-elbow-seal","provider":"Good Vibes Marina","version":"1.0","type":"link"}