{"product_id":"evercoat-pva-mold-release-agent-8-oz-water-soluble-gel-coat-release-film","title":"Evercoat PVA Mold Release Agent, 8 oz - Water-Soluble Gel Coat Release Film","description":"\u003cp\u003eEvercoat PVA Mold Release Agent is a water-soluble liquid mold release that forms a smooth parting film, allowing molded surfaces to cure to a glossy finish. It is designed to promote the complete cure of polyester gel coat, eliminating surface tackiness that can otherwise remain after a gel coat repair or lay-up. The 8 fl. Oz. Bottle covers approximately 20 square feet when applied correctly.\u003c\/p\u003e\u003cp\u003ePVA Mold Release can be applied by spraying or with a soft bristle brush. For spray application, use a small orifice spray gun at 90 to 100 psi or an aerosol spray, holding the nozzle 12 to 18 inches from the surface. Apply a light mist coat first, followed by a heavier full wet coat. If applying by brush, use one full coat and allow it to dry 30 to 60 minutes before applying resin to the mold.\u003c\/p\u003e\u003cp\u003eWhen used over gel coat, apply one full wet coat by spray or brush to the uncured gel coat surface and allow the gel coat to cure for 4 to 6 hours before removing the mold release. PVA Mold Release can be removed from the mold or the cured gel coat surface with plain water, making cleanup straightforward.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Evercoat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 105685\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e PVA Mold Release Agent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8 fl. Oz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approximately 20 square feet per 8 fl. Oz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Spray or soft bristle brush\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Spray Pressure:\u003c\/strong\u003e 90 to 100 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray Distance:\u003c\/strong\u003e 12 to 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time (Gel Coat):\u003c\/strong\u003e 4 to 6 hours before removing mold release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanup:\u003c\/strong\u003e Removable with water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 023289056858\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.60625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 4 x 2 x 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Evercoat PVA Mold Release Agent used for?\u003c\/strong\u003e It is a water-soluble liquid mold release that forms a smooth parting film on molded surfaces and promotes the complete cure of polyester gel coat, which the Evercoat 105685 PVA Mold Release is formulated to support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one bottle of PVA Mold Release cover?\u003c\/strong\u003e 8 fl. Oz. Of Evercoat PVA Mold Release covers approximately 20 square feet when applied as directed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I apply Evercoat PVA Mold Release Agent?\u003c\/strong\u003e Apply it by spraying with a small orifice spray gun at 90 to 100 psi or an aerosol spray, held 12 to 18 inches from the surface, using a light mist coat followed by a heavier full wet coat; it can also be applied with a soft bristle brush.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan PVA Mold Release be applied with a brush instead of a sprayer?\u003c\/strong\u003e Yes, apply one full coat by brush and allow it to dry approximately 30 to 60 minutes before applying resin to the mold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does gel coat need to cure before the mold release is removed?\u003c\/strong\u003e When Evercoat PVA Mold Release is applied to promote gel coat cure, the gel coat should cure for 4 to 6 hours before the mold release is removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I remove PVA Mold Release from a mold or gel coat surface?\u003c\/strong\u003e PVA Mold Release can be removed from the mold or the gel coat surface with plain water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a mist coat and a full wet coat when spraying this product?\u003c\/strong\u003e For Evercoat PVA Mold Release, the recommended technique is to first apply a light mist coat, then follow with a heavier full wet coat to form the complete parting film.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes PVA Mold Release chemically cure the gel coat itself?\u003c\/strong\u003e No, PVA Mold Release forms a parting film over the gel coat surface that promotes complete cure by eliminating surface tackiness, rather than curing the gel coat chemically itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size and weight is the Evercoat 105685 PVA Mold Release bottle?\u003c\/strong\u003e The Evercoat 105685 PVA Mold Release Agent comes in an 8 fl. Oz. Bottle with product dimensions of 4 x 2 x 6.25 inches and a weight of 0.60625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a Safety Data Sheet available for this product?\u003c\/strong\u003e Yes, a Safety Data Sheet is available for download for the Evercoat PVA Mold Release Agent, part number 105685.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other applications can Evercoat PVA Mold Release be used for besides gel coat?\u003c\/strong\u003e Evercoat PVA Mold Release forms a smooth parting film that allows a glossy finish on molded surfaces generally, in addition to promoting complete cure on Polyester Gel Coat.\u003c\/p\u003e","brand":"Fiberglass Evercoat","offers":[{"title":"Default Title","offer_id":49027988127963,"sku":"F-E-5685","price":20.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/F-E-5685_lg__85803.1558137740.500.750.jpg?v=1785163910","url":"https:\/\/www.goodvibesmarina.com\/products\/evercoat-pva-mold-release-agent-8-oz-water-soluble-gel-coat-release-film","provider":"Good Vibes Marina","version":"1.0","type":"link"}