{"product_id":"garelick-75025s-adjustable-table-base-pedestal-15-to-30-inch-height-cast-aluminum","title":"Garelick 75025S Adjustable Table Base Pedestal, 15 to 30 Inch Height, Cast Aluminum","description":"\u003cp\u003eThe Garelick 75025S Adjustable Table Base Pedestal lets you convert a dinette into a berth by raising or lowering the tabletop to match the surrounding seating. Built from cast aluminum with a polished aluminum finish, the pedestal resists marine corrosion while giving the boat's interior a clean, finished look. A 9 inch diameter cast aluminum base sits at each end of the pedestal for solid support, connected by a 2.875 inch smooth stanchion tube that slides and locks at any height from 15 inches to 30 inches using a tightening knob.\u003c\/p\u003e\u003cp\u003eIn its lower position, the inside tube retracts and requires 6 inches of open space below the deck, so it is important to confirm there is no wiring or structural reinforcement in that area before cutting the mounting hole. The base is intended to be through-bolted to the deck, ideally with a backing plate for a secure, reinforced attachment; mounting fasteners are not included. The table top itself is attached to the upper base plate separately, and the tabletop height can then be adjusted up or down as needed once installed. This pedestal is a practical upgrade for boaters who want the flexibility of a dinette by day and a sleeping berth by night.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Garelick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 75025S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Height Range:\u003c\/strong\u003e 15 inches to 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Diameter:\u003c\/strong\u003e 9 inches (23 cm) cast aluminum base at each end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStanchion Tube Diameter:\u003c\/strong\u003e 2.875 inches (7 cm), smooth tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelow-Deck Clearance Required:\u003c\/strong\u003e 6 inches (15 cm) in lower position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 489394319881\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Fasteners not included; backing plate recommended\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat height range does the Garelick 75025S table base adjust to?\u003c\/strong\u003e The Garelick 75025S Adjustable Table Base Pedestal locks at any height between 15 inches and 30 inches, adjusted using a tightening knob on the stanchion tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this table pedestal made of?\u003c\/strong\u003e The 75025S pedestal is made of cast aluminum with a polished aluminum finish, giving it marine corrosion resistance and a clean appearance on board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this table base convert a dinette into a berth?\u003c\/strong\u003e Yes, the Garelick 75025S is designed to lower the table height so a dinette area can be converted into a sleeping berth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much clearance is needed below the deck to install the 75025S?\u003c\/strong\u003e In its lower position, the inside tube of the 75025S extends 6 inches below the deck, so that space must be free of wiring or reinforcement ribs before cutting the mounting hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting fasteners included with this table base?\u003c\/strong\u003e No, fasteners are not provided with the Garelick 75025S; a backing plate is recommended for a secure, reinforced deck attachment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is the base of the 75025S pedestal?\u003c\/strong\u003e Each end of the 75025S pedestal has a 9 inch (23 cm) diameter cast aluminum base for support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat diameter is the stanchion tube on this pedestal?\u003c\/strong\u003e The Garelick 75025S uses a 2.875 inch (7 cm) smooth stanchion tube that slides within the base assembly to adjust height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Garelick 75025S table base weigh?\u003c\/strong\u003e The Garelick 75025S Adjustable Table Base Pedestal weighs 10 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the table top attach directly to this pedestal?\u003c\/strong\u003e The table top mounts to the upper base of the 75025S using separate fasteners after loosening the locking knob to access the inside tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 75025S pedestal locked in place once adjusted?\u003c\/strong\u003e Yes, tightening the knob on the 75025S secures the inside tube at the selected height between 15 and 30 inches so the table stays stable.\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":49027991929051,"sku":"GAR-75025S","price":237.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Garelick-75025S-Adjustable-Table-Pedestal-fully-extended__00084.1737844391.500.750.jpg?v=1785164286","url":"https:\/\/www.goodvibesmarina.com\/products\/garelick-75025s-adjustable-table-base-pedestal-15-to-30-inch-height-cast-aluminum","provider":"Good Vibes Marina","version":"1.0","type":"link"}