{"product_id":"garelick-99181-stainless-steel-transom-mounting-extension-shim-2-inch-for-sport-dive-ladders","title":"Garelick 99181 Stainless Steel Transom Mounting Extension Shim, 2 Inch, for Sport Dive Ladders","description":"\u003cp\u003eThe Garelick 99181 is a stainless steel transom mounting extension shim built for use with Garelick sport and diver series boat ladders. It extends the ladder 2 inches farther from the transom, which is useful when the standard mounting position places the ladder too close to the hull, swim platform edge, outboard motor, or other transom-mounted hardware. The shim is used together with the stainless steel face plate and 10 degree poly spacer (Garelick 99180) that is included with the ladder, allowing the ladder to be repositioned outward without changing the mounting hardware or angle.\u003c\/p\u003e\u003cp\u003eConstructed of stainless steel for corrosion resistance in a marine environment, the shim measures 2 inches wide by 3.62 inches high by 2.75 inches deep. It is designed as a direct add-on accessory for Garelick sport\/diver series ladders and installs using the same mounting hardware as the standard face plate and poly spacer setup. Installation instructions are provided with the part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Garelick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 99181\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Transom Mounting Extension Shim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2 inches (5 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.62 inches (9 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 2.75 inches (7 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Distance:\u003c\/strong\u003e 2 inches farther from the transom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed With:\u003c\/strong\u003e Face plate and 10 degree poly spacer (Garelick 99180), included with the ladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 038203991818\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eGarelick sport\/diver series ladders\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Garelick 99181 shim do?\u003c\/strong\u003e The Garelick 99181 is a transom mounting extension shim that moves a Garelick sport\/diver series ladder 2 inches farther out from the transom than the standard mounting position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ladders is the 99181 shim compatible with?\u003c\/strong\u003e The 99181 shim is designed for use with Garelick sport\/diver series ladders and installs alongside the standard mounting hardware for that ladder line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 99181 shim made of?\u003c\/strong\u003e It is made of stainless steel for corrosion resistance in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the Garelick 99181?\u003c\/strong\u003e The Garelick 99181 measures 2 inches wide by 3.62 inches high by 2.75 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 99181 shim weigh?\u003c\/strong\u003e The Garelick 99181 transom mounting extension shim weighs 1 pound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any other parts to install the 99181 shim?\u003c\/strong\u003e Yes, the 99181 is used together with the stainless steel face plate and 10 degree poly spacer (Garelick 99180) that comes included with the ladder; it does not replace that hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 99181 shim come with installation instructions?\u003c\/strong\u003e Yes, installation instructions are provided with the Garelick 99181 shim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far does the 99181 shim move the ladder from the transom?\u003c\/strong\u003e It extends the ladder 2 inches farther from the transom compared to the standard mounting distance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 99181 different from the Garelick 99183 shim?\u003c\/strong\u003e Yes, the 99181 is a fixed 2 inch stainless steel extension shim, while the Garelick 99183 is a solid poly block that can be custom cut to a specific angle for special mounting applications; they are separate part numbers for different mounting needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 99181 shim be used on any boat transom?\u003c\/strong\u003e The 99181 is intended for use with Garelick sport\/diver series ladder mounting hardware and the included face plate and poly spacer setup rather than as a standalone universal bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 99181 an aftermarket or genuine Garelick part?\u003c\/strong\u003e The 99181 is a genuine Garelick part, identified by manufacturer part number 99181.\u003c\/p\u003e","brand":"Garelick","offers":[{"title":"Default Title","offer_id":49027992715483,"sku":"GAR-99181","price":56.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__47022.1763741553.500.750.jpg?v=1785164295","url":"https:\/\/www.goodvibesmarina.com\/products\/garelick-99181-stainless-steel-transom-mounting-extension-shim-2-inch-for-sport-dive-ladders","provider":"Good Vibes Marina","version":"1.0","type":"link"}